| # Copyright (C) 2014 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| from __future__ import print_function |
| |
| import array |
| import copy |
| import functools |
| import heapq |
| import itertools |
| import logging |
| import multiprocessing |
| import os |
| import os.path |
| import re |
| import sys |
| import threading |
| import zlib |
| from collections import deque, namedtuple, OrderedDict |
| |
| import common |
| from images import EmptyImage |
| from rangelib import RangeSet |
| |
| __all__ = ["BlockImageDiff"] |
| |
| logger = logging.getLogger(__name__) |
| |
| # The tuple contains the style and bytes of a bsdiff|imgdiff patch. |
| PatchInfo = namedtuple("PatchInfo", ["imgdiff", "content"]) |
| |
| |
| def compute_patch(srcfile, tgtfile, imgdiff=False): |
| """Calls bsdiff|imgdiff to compute the patch data, returns a PatchInfo.""" |
| patchfile = common.MakeTempFile(prefix='patch-') |
| |
| cmd = ['imgdiff', '-z'] if imgdiff else ['bsdiff'] |
| cmd.extend([srcfile, tgtfile, patchfile]) |
| |
| # Don't dump the bsdiff/imgdiff commands, which are not useful for the case |
| # here, since they contain temp filenames only. |
| proc = common.Run(cmd, verbose=False) |
| output, _ = proc.communicate() |
| |
| if proc.returncode != 0: |
| raise ValueError(output) |
| |
| with open(patchfile, 'rb') as f: |
| return PatchInfo(imgdiff, f.read()) |
| |
| |
| class Transfer(object): |
| def __init__(self, tgt_name, src_name, tgt_ranges, src_ranges, tgt_sha1, |
| src_sha1, style, by_id): |
| self.tgt_name = tgt_name |
| self.src_name = src_name |
| self.tgt_ranges = tgt_ranges |
| self.src_ranges = src_ranges |
| self.tgt_sha1 = tgt_sha1 |
| self.src_sha1 = src_sha1 |
| self.style = style |
| |
| # We use OrderedDict rather than dict so that the output is repeatable; |
| # otherwise it would depend on the hash values of the Transfer objects. |
| self.goes_before = OrderedDict() |
| self.goes_after = OrderedDict() |
| |
| self.stash_before = [] |
| self.use_stash = [] |
| |
| self.id = len(by_id) |
| by_id.append(self) |
| |
| self._patch_info = None |
| |
| @property |
| def patch_info(self): |
| return self._patch_info |
| |
| @patch_info.setter |
| def patch_info(self, info): |
| if info: |
| assert self.style == "diff" |
| self._patch_info = info |
| |
| def NetStashChange(self): |
| return (sum(sr.size() for (_, sr) in self.stash_before) - |
| sum(sr.size() for (_, sr) in self.use_stash)) |
| |
| def ConvertToNew(self): |
| assert self.style != "new" |
| self.use_stash = [] |
| self.style = "new" |
| self.src_ranges = RangeSet() |
| self.patch_info = None |
| |
| def __str__(self): |
| return (str(self.id) + ": <" + str(self.src_ranges) + " " + self.style + |
| " to " + str(self.tgt_ranges) + ">") |
| |
| |
| @functools.total_ordering |
| class HeapItem(object): |
| def __init__(self, item): |
| self.item = item |
| # Negate the score since python's heap is a min-heap and we want the |
| # maximum score. |
| self.score = -item.score |
| |
| def clear(self): |
| self.item = None |
| |
| def __bool__(self): |
| return self.item is not None |
| |
| # Python 2 uses __nonzero__, while Python 3 uses __bool__. |
| __nonzero__ = __bool__ |
| |
| # The rest operations are generated by functools.total_ordering decorator. |
| def __eq__(self, other): |
| return self.score == other.score |
| |
| def __le__(self, other): |
| return self.score <= other.score |
| |
| |
| class ImgdiffStats(object): |
| """A class that collects imgdiff stats. |
| |
| It keeps track of the files that will be applied imgdiff while generating |
| BlockImageDiff. It also logs the ones that cannot use imgdiff, with specific |
| reasons. The stats is only meaningful when imgdiff not being disabled by the |
| caller of BlockImageDiff. In addition, only files with supported types |
| (BlockImageDiff.FileTypeSupportedByImgdiff()) are allowed to be logged. |
| """ |
| |
| USED_IMGDIFF = "APK files diff'd with imgdiff" |
| USED_IMGDIFF_LARGE_APK = "Large APK files split and diff'd with imgdiff" |
| |
| # Reasons for not applying imgdiff on APKs. |
| SKIPPED_NONMONOTONIC = "Not used imgdiff due to having non-monotonic ranges" |
| SKIPPED_SHARED_BLOCKS = "Not used imgdiff due to using shared blocks" |
| SKIPPED_INCOMPLETE = "Not used imgdiff due to incomplete RangeSet" |
| |
| # The list of valid reasons, which will also be the dumped order in a report. |
| REASONS = ( |
| USED_IMGDIFF, |
| USED_IMGDIFF_LARGE_APK, |
| SKIPPED_NONMONOTONIC, |
| SKIPPED_SHARED_BLOCKS, |
| SKIPPED_INCOMPLETE, |
| ) |
| |
| def __init__(self): |
| self.stats = {} |
| |
| def Log(self, filename, reason): |
| """Logs why imgdiff can or cannot be applied to the given filename. |
| |
| Args: |
| filename: The filename string. |
| reason: One of the reason constants listed in REASONS. |
| |
| Raises: |
| AssertionError: On unsupported filetypes or invalid reason. |
| """ |
| assert BlockImageDiff.FileTypeSupportedByImgdiff(filename) |
| assert reason in self.REASONS |
| |
| if reason not in self.stats: |
| self.stats[reason] = set() |
| self.stats[reason].add(filename) |
| |
| def Report(self): |
| """Prints a report of the collected imgdiff stats.""" |
| |
| def print_header(header, separator): |
| logger.info(header) |
| logger.info('%s\n', separator * len(header)) |
| |
| print_header(' Imgdiff Stats Report ', '=') |
| for key in self.REASONS: |
| if key not in self.stats: |
| continue |
| values = self.stats[key] |
| section_header = ' {} (count: {}) '.format(key, len(values)) |
| print_header(section_header, '-') |
| logger.info(''.join([' {}\n'.format(name) for name in values])) |
| |
| |
| class BlockImageDiff(object): |
| """Generates the diff of two block image objects. |
| |
| BlockImageDiff works on two image objects. An image object is anything that |
| provides the following attributes: |
| |
| blocksize: the size in bytes of a block, currently must be 4096. |
| |
| total_blocks: the total size of the partition/image, in blocks. |
| |
| care_map: a RangeSet containing which blocks (in the range [0, |
| total_blocks) we actually care about; i.e. which blocks contain data. |
| |
| file_map: a dict that partitions the blocks contained in care_map into |
| smaller domains that are useful for doing diffs on. (Typically a domain |
| is a file, and the key in file_map is the pathname.) |
| |
| clobbered_blocks: a RangeSet containing which blocks contain data but may |
| be altered by the FS. They need to be excluded when verifying the |
| partition integrity. |
| |
| ReadRangeSet(): a function that takes a RangeSet and returns the data |
| contained in the image blocks of that RangeSet. The data is returned as |
| a list or tuple of strings; concatenating the elements together should |
| produce the requested data. Implementations are free to break up the |
| data into list/tuple elements in any way that is convenient. |
| |
| RangeSha1(): a function that returns (as a hex string) the SHA-1 hash of |
| all the data in the specified range. |
| |
| TotalSha1(): a function that returns (as a hex string) the SHA-1 hash of |
| all the data in the image (ie, all the blocks in the care_map minus |
| clobbered_blocks, or including the clobbered blocks if |
| include_clobbered_blocks is True). |
| |
| When creating a BlockImageDiff, the src image may be None, in which case the |
| list of transfers produced will never read from the original image. |
| """ |
| |
| def __init__(self, tgt, src=None, threads=None, version=4, |
| disable_imgdiff=False): |
| if threads is None: |
| threads = multiprocessing.cpu_count() // 2 |
| if threads == 0: |
| threads = 1 |
| self.threads = threads |
| self.version = version |
| self.transfers = [] |
| self.src_basenames = {} |
| self.src_numpatterns = {} |
| self._max_stashed_size = 0 |
| self.touched_src_ranges = RangeSet() |
| self.touched_src_sha1 = None |
| self.disable_imgdiff = disable_imgdiff |
| self.imgdiff_stats = ImgdiffStats() if not disable_imgdiff else None |
| |
| assert version in (3, 4) |
| |
| self.tgt = tgt |
| if src is None: |
| src = EmptyImage() |
| self.src = src |
| |
| # The updater code that installs the patch always uses 4k blocks. |
| assert tgt.blocksize == 4096 |
| assert src.blocksize == 4096 |
| |
| # The range sets in each filemap should comprise a partition of |
| # the care map. |
| self.AssertPartition(src.care_map, src.file_map.values()) |
| self.AssertPartition(tgt.care_map, tgt.file_map.values()) |
| |
| @property |
| def max_stashed_size(self): |
| return self._max_stashed_size |
| |
| @staticmethod |
| def FileTypeSupportedByImgdiff(filename): |
| """Returns whether the file type is supported by imgdiff.""" |
| return filename.lower().endswith(('.apk', '.jar', '.zip')) |
| |
| def CanUseImgdiff(self, name, tgt_ranges, src_ranges, large_apk=False): |
| """Checks whether we can apply imgdiff for the given RangeSets. |
| |
| For files in ZIP format (e.g., APKs, JARs, etc.) we would like to use |
| 'imgdiff -z' if possible. Because it usually produces significantly smaller |
| patches than bsdiff. |
| |
| This is permissible if all of the following conditions hold. |
| - The imgdiff hasn't been disabled by the caller (e.g. squashfs); |
| - The file type is supported by imgdiff; |
| - The source and target blocks are monotonic (i.e. the data is stored with |
| blocks in increasing order); |
| - Both files don't contain shared blocks; |
| - Both files have complete lists of blocks; |
| - We haven't removed any blocks from the source set. |
| |
| If all these conditions are satisfied, concatenating all the blocks in the |
| RangeSet in order will produce a valid ZIP file (plus possibly extra zeros |
| in the last block). imgdiff is fine with extra zeros at the end of the file. |
| |
| Args: |
| name: The filename to be diff'd. |
| tgt_ranges: The target RangeSet. |
| src_ranges: The source RangeSet. |
| large_apk: Whether this is to split a large APK. |
| |
| Returns: |
| A boolean result. |
| """ |
| if self.disable_imgdiff or not self.FileTypeSupportedByImgdiff(name): |
| return False |
| |
| if not tgt_ranges.monotonic or not src_ranges.monotonic: |
| self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_NONMONOTONIC) |
| return False |
| |
| if (tgt_ranges.extra.get('uses_shared_blocks') or |
| src_ranges.extra.get('uses_shared_blocks')): |
| self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_SHARED_BLOCKS) |
| return False |
| |
| if tgt_ranges.extra.get('incomplete') or src_ranges.extra.get('incomplete'): |
| self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_INCOMPLETE) |
| return False |
| |
| reason = (ImgdiffStats.USED_IMGDIFF_LARGE_APK if large_apk |
| else ImgdiffStats.USED_IMGDIFF) |
| self.imgdiff_stats.Log(name, reason) |
| return True |
| |
| def Compute(self, prefix): |
| # When looking for a source file to use as the diff input for a |
| # target file, we try: |
| # 1) an exact path match if available, otherwise |
| # 2) a exact basename match if available, otherwise |
| # 3) a basename match after all runs of digits are replaced by |
| # "#" if available, otherwise |
| # 4) we have no source for this target. |
| self.AbbreviateSourceNames() |
| self.FindTransfers() |
| |
| self.FindSequenceForTransfers() |
| |
| # Ensure the runtime stash size is under the limit. |
| if common.OPTIONS.cache_size is not None: |
| stash_limit = (common.OPTIONS.cache_size * |
| common.OPTIONS.stash_threshold / self.tgt.blocksize) |
| # Ignore the stash limit and calculate the maximum simultaneously stashed |
| # blocks needed. |
| _, max_stashed_blocks = self.ReviseStashSize(ignore_stash_limit=True) |
| |
| # We cannot stash more blocks than the stash limit simultaneously. As a |
| # result, some 'diff' commands will be converted to new; leading to an |
| # unintended large package. To mitigate this issue, we can carefully |
| # choose the transfers for conversion. The number '1024' can be further |
| # tweaked here to balance the package size and build time. |
| if max_stashed_blocks > stash_limit + 1024: |
| self.SelectAndConvertDiffTransfersToNew( |
| max_stashed_blocks - stash_limit) |
| # Regenerate the sequence as the graph has changed. |
| self.FindSequenceForTransfers() |
| |
| # Revise the stash size again to keep the size under limit. |
| self.ReviseStashSize() |
| |
| # Double-check our work. |
| self.AssertSequenceGood() |
| self.AssertSha1Good() |
| |
| self.ComputePatches(prefix) |
| self.WriteTransfers(prefix) |
| |
| # Report the imgdiff stats. |
| if not self.disable_imgdiff: |
| self.imgdiff_stats.Report() |
| |
| def WriteTransfers(self, prefix): |
| def WriteSplitTransfers(out, style, target_blocks): |
| """Limit the size of operand in command 'new' and 'zero' to 1024 blocks. |
| |
| This prevents the target size of one command from being too large; and |
| might help to avoid fsync errors on some devices.""" |
| |
| assert style == "new" or style == "zero" |
| blocks_limit = 1024 |
| total = 0 |
| while target_blocks: |
| blocks_to_write = target_blocks.first(blocks_limit) |
| out.append("%s %s\n" % (style, blocks_to_write.to_string_raw())) |
| total += blocks_to_write.size() |
| target_blocks = target_blocks.subtract(blocks_to_write) |
| return total |
| |
| out = [] |
| total = 0 |
| |
| # In BBOTA v3+, it uses the hash of the stashed blocks as the stash slot |
| # id. 'stashes' records the map from 'hash' to the ref count. The stash |
| # will be freed only if the count decrements to zero. |
| stashes = {} |
| stashed_blocks = 0 |
| max_stashed_blocks = 0 |
| |
| for xf in self.transfers: |
| |
| for _, sr in xf.stash_before: |
| sh = self.src.RangeSha1(sr) |
| if sh in stashes: |
| stashes[sh] += 1 |
| else: |
| stashes[sh] = 1 |
| stashed_blocks += sr.size() |
| self.touched_src_ranges = self.touched_src_ranges.union(sr) |
| out.append("stash %s %s\n" % (sh, sr.to_string_raw())) |
| |
| if stashed_blocks > max_stashed_blocks: |
| max_stashed_blocks = stashed_blocks |
| |
| free_string = [] |
| free_size = 0 |
| |
| # <# blocks> <src ranges> |
| # OR |
| # <# blocks> <src ranges> <src locs> <stash refs...> |
| # OR |
| # <# blocks> - <stash refs...> |
| |
| size = xf.src_ranges.size() |
| src_str_buffer = [str(size)] |
| |
| unstashed_src_ranges = xf.src_ranges |
| mapped_stashes = [] |
| for _, sr in xf.use_stash: |
| unstashed_src_ranges = unstashed_src_ranges.subtract(sr) |
| sh = self.src.RangeSha1(sr) |
| sr = xf.src_ranges.map_within(sr) |
| mapped_stashes.append(sr) |
| assert sh in stashes |
| src_str_buffer.append("%s:%s" % (sh, sr.to_string_raw())) |
| stashes[sh] -= 1 |
| if stashes[sh] == 0: |
| free_string.append("free %s\n" % (sh,)) |
| free_size += sr.size() |
| stashes.pop(sh) |
| |
| if unstashed_src_ranges: |
| src_str_buffer.insert(1, unstashed_src_ranges.to_string_raw()) |
| if xf.use_stash: |
| mapped_unstashed = xf.src_ranges.map_within(unstashed_src_ranges) |
| src_str_buffer.insert(2, mapped_unstashed.to_string_raw()) |
| mapped_stashes.append(mapped_unstashed) |
| self.AssertPartition(RangeSet(data=(0, size)), mapped_stashes) |
| else: |
| src_str_buffer.insert(1, "-") |
| self.AssertPartition(RangeSet(data=(0, size)), mapped_stashes) |
| |
| src_str = " ".join(src_str_buffer) |
| |
| # version 3+: |
| # zero <rangeset> |
| # new <rangeset> |
| # erase <rangeset> |
| # bsdiff patchstart patchlen srchash tgthash <tgt rangeset> <src_str> |
| # imgdiff patchstart patchlen srchash tgthash <tgt rangeset> <src_str> |
| # move hash <tgt rangeset> <src_str> |
| |
| tgt_size = xf.tgt_ranges.size() |
| |
| if xf.style == "new": |
| assert xf.tgt_ranges |
| assert tgt_size == WriteSplitTransfers(out, xf.style, xf.tgt_ranges) |
| total += tgt_size |
| elif xf.style == "move": |
| assert xf.tgt_ranges |
| assert xf.src_ranges.size() == tgt_size |
| if xf.src_ranges != xf.tgt_ranges: |
| # take into account automatic stashing of overlapping blocks |
| if xf.src_ranges.overlaps(xf.tgt_ranges): |
| temp_stash_usage = stashed_blocks + xf.src_ranges.size() |
| if temp_stash_usage > max_stashed_blocks: |
| max_stashed_blocks = temp_stash_usage |
| |
| self.touched_src_ranges = self.touched_src_ranges.union( |
| xf.src_ranges) |
| |
| out.append("%s %s %s %s\n" % ( |
| xf.style, |
| xf.tgt_sha1, |
| xf.tgt_ranges.to_string_raw(), src_str)) |
| total += tgt_size |
| elif xf.style in ("bsdiff", "imgdiff"): |
| assert xf.tgt_ranges |
| assert xf.src_ranges |
| # take into account automatic stashing of overlapping blocks |
| if xf.src_ranges.overlaps(xf.tgt_ranges): |
| temp_stash_usage = stashed_blocks + xf.src_ranges.size() |
| if temp_stash_usage > max_stashed_blocks: |
| max_stashed_blocks = temp_stash_usage |
| |
| self.touched_src_ranges = self.touched_src_ranges.union(xf.src_ranges) |
| |
| out.append("%s %d %d %s %s %s %s\n" % ( |
| xf.style, |
| xf.patch_start, xf.patch_len, |
| xf.src_sha1, |
| xf.tgt_sha1, |
| xf.tgt_ranges.to_string_raw(), src_str)) |
| total += tgt_size |
| elif xf.style == "zero": |
| assert xf.tgt_ranges |
| to_zero = xf.tgt_ranges.subtract(xf.src_ranges) |
| assert WriteSplitTransfers(out, xf.style, to_zero) == to_zero.size() |
| total += to_zero.size() |
| else: |
| raise ValueError("unknown transfer style '%s'\n" % xf.style) |
| |
| if free_string: |
| out.append("".join(free_string)) |
| stashed_blocks -= free_size |
| |
| if common.OPTIONS.cache_size is not None: |
| # Validation check: abort if we're going to need more stash space than |
| # the allowed size (cache_size * threshold). There are two purposes |
| # of having a threshold here. a) Part of the cache may have been |
| # occupied by some recovery logs. b) It will buy us some time to deal |
| # with the oversize issue. |
| cache_size = common.OPTIONS.cache_size |
| stash_threshold = common.OPTIONS.stash_threshold |
| max_allowed = cache_size * stash_threshold |
| assert max_stashed_blocks * self.tgt.blocksize <= max_allowed, \ |
| 'Stash size %d (%d * %d) exceeds the limit %d (%d * %.2f)' % ( |
| max_stashed_blocks * self.tgt.blocksize, max_stashed_blocks, |
| self.tgt.blocksize, max_allowed, cache_size, |
| stash_threshold) |
| |
| self.touched_src_sha1 = self.src.RangeSha1(self.touched_src_ranges) |
| |
| # Zero out extended blocks as a workaround for bug 20881595. |
| if self.tgt.extended: |
| assert (WriteSplitTransfers(out, "zero", self.tgt.extended) == |
| self.tgt.extended.size()) |
| total += self.tgt.extended.size() |
| |
| # We erase all the blocks on the partition that a) don't contain useful |
| # data in the new image; b) will not be touched by dm-verity. Out of those |
| # blocks, we erase the ones that won't be used in this update at the |
| # beginning of an update. The rest would be erased at the end. This is to |
| # work around the eMMC issue observed on some devices, which may otherwise |
| # get starving for clean blocks and thus fail the update. (b/28347095) |
| all_tgt = RangeSet(data=(0, self.tgt.total_blocks)) |
| all_tgt_minus_extended = all_tgt.subtract(self.tgt.extended) |
| new_dontcare = all_tgt_minus_extended.subtract(self.tgt.care_map) |
| |
| erase_first = new_dontcare.subtract(self.touched_src_ranges) |
| if erase_first: |
| out.insert(0, "erase %s\n" % (erase_first.to_string_raw(),)) |
| |
| erase_last = new_dontcare.subtract(erase_first) |
| if erase_last: |
| out.append("erase %s\n" % (erase_last.to_string_raw(),)) |
| |
| out.insert(0, "%d\n" % (self.version,)) # format version number |
| out.insert(1, "%d\n" % (total,)) |
| # v3+: the number of stash slots is unused. |
| out.insert(2, "0\n") |
| out.insert(3, str(max_stashed_blocks) + "\n") |
| |
| with open(prefix + ".transfer.list", "w") as f: |
| for i in out: |
| f.write(i) |
| |
| self._max_stashed_size = max_stashed_blocks * self.tgt.blocksize |
| OPTIONS = common.OPTIONS |
| if OPTIONS.cache_size is not None: |
| max_allowed = OPTIONS.cache_size * OPTIONS.stash_threshold |
| logger.info( |
| "max stashed blocks: %d (%d bytes), limit: %d bytes (%.2f%%)\n", |
| max_stashed_blocks, self._max_stashed_size, max_allowed, |
| self._max_stashed_size * 100.0 / max_allowed) |
| else: |
| logger.info( |
| "max stashed blocks: %d (%d bytes), limit: <unknown>\n", |
| max_stashed_blocks, self._max_stashed_size) |
| |
| def ReviseStashSize(self, ignore_stash_limit=False): |
| """ Revises the transfers to keep the stash size within the size limit. |
| |
| Iterates through the transfer list and calculates the stash size each |
| transfer generates. Converts the affected transfers to new if we reach the |
| stash limit. |
| |
| Args: |
| ignore_stash_limit: Ignores the stash limit and calculates the max |
| simultaneous stashed blocks instead. No change will be made to the |
| transfer list with this flag. |
| |
| Return: |
| A tuple of (tgt blocks converted to new, max stashed blocks) |
| """ |
| logger.info("Revising stash size...") |
| stash_map = {} |
| |
| # Create the map between a stash and its def/use points. For example, for a |
| # given stash of (raw_id, sr), stash_map[raw_id] = (sr, def_cmd, use_cmd). |
| for xf in self.transfers: |
| # Command xf defines (stores) all the stashes in stash_before. |
| for stash_raw_id, sr in xf.stash_before: |
| stash_map[stash_raw_id] = (sr, xf) |
| |
| # Record all the stashes command xf uses. |
| for stash_raw_id, _ in xf.use_stash: |
| stash_map[stash_raw_id] += (xf,) |
| |
| max_allowed_blocks = None |
| if not ignore_stash_limit: |
| # Compute the maximum blocks available for stash based on /cache size and |
| # the threshold. |
| cache_size = common.OPTIONS.cache_size |
| stash_threshold = common.OPTIONS.stash_threshold |
| max_allowed_blocks = cache_size * stash_threshold / self.tgt.blocksize |
| |
| # See the comments for 'stashes' in WriteTransfers(). |
| stashes = {} |
| stashed_blocks = 0 |
| new_blocks = 0 |
| max_stashed_blocks = 0 |
| |
| # Now go through all the commands. Compute the required stash size on the |
| # fly. If a command requires excess stash than available, it deletes the |
| # stash by replacing the command that uses the stash with a "new" command |
| # instead. |
| for xf in self.transfers: |
| replaced_cmds = [] |
| |
| # xf.stash_before generates explicit stash commands. |
| for stash_raw_id, sr in xf.stash_before: |
| # Check the post-command stashed_blocks. |
| stashed_blocks_after = stashed_blocks |
| sh = self.src.RangeSha1(sr) |
| if sh not in stashes: |
| stashed_blocks_after += sr.size() |
| |
| if max_allowed_blocks and stashed_blocks_after > max_allowed_blocks: |
| # We cannot stash this one for a later command. Find out the command |
| # that will use this stash and replace the command with "new". |
| use_cmd = stash_map[stash_raw_id][2] |
| replaced_cmds.append(use_cmd) |
| logger.info("%10d %9s %s", sr.size(), "explicit", use_cmd) |
| else: |
| # Update the stashes map. |
| if sh in stashes: |
| stashes[sh] += 1 |
| else: |
| stashes[sh] = 1 |
| stashed_blocks = stashed_blocks_after |
| max_stashed_blocks = max(max_stashed_blocks, stashed_blocks) |
| |
| # "move" and "diff" may introduce implicit stashes in BBOTA v3. Prior to |
| # ComputePatches(), they both have the style of "diff". |
| if xf.style == "diff": |
| assert xf.tgt_ranges and xf.src_ranges |
| if xf.src_ranges.overlaps(xf.tgt_ranges): |
| if (max_allowed_blocks and |
| stashed_blocks + xf.src_ranges.size() > max_allowed_blocks): |
| replaced_cmds.append(xf) |
| logger.info("%10d %9s %s", xf.src_ranges.size(), "implicit", xf) |
| else: |
| # The whole source ranges will be stashed for implicit stashes. |
| max_stashed_blocks = max(max_stashed_blocks, |
| stashed_blocks + xf.src_ranges.size()) |
| |
| # Replace the commands in replaced_cmds with "new"s. |
| for cmd in replaced_cmds: |
| # It no longer uses any commands in "use_stash". Remove the def points |
| # for all those stashes. |
| for stash_raw_id, sr in cmd.use_stash: |
| def_cmd = stash_map[stash_raw_id][1] |
| assert (stash_raw_id, sr) in def_cmd.stash_before |
| def_cmd.stash_before.remove((stash_raw_id, sr)) |
| |
| # Add up blocks that violates space limit and print total number to |
| # screen later. |
| new_blocks += cmd.tgt_ranges.size() |
| cmd.ConvertToNew() |
| |
| # xf.use_stash may generate free commands. |
| for _, sr in xf.use_stash: |
| sh = self.src.RangeSha1(sr) |
| assert sh in stashes |
| stashes[sh] -= 1 |
| if stashes[sh] == 0: |
| stashed_blocks -= sr.size() |
| stashes.pop(sh) |
| |
| num_of_bytes = new_blocks * self.tgt.blocksize |
| logger.info( |
| " Total %d blocks (%d bytes) are packed as new blocks due to " |
| "insufficient cache size. Maximum blocks stashed simultaneously: %d", |
| new_blocks, num_of_bytes, max_stashed_blocks) |
| return new_blocks, max_stashed_blocks |
| |
| def ComputePatches(self, prefix): |
| logger.info("Reticulating splines...") |
| diff_queue = [] |
| patch_num = 0 |
| with open(prefix + ".new.dat", "wb") as new_f: |
| for index, xf in enumerate(self.transfers): |
| if xf.style == "zero": |
| tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize |
| logger.info( |
| "%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0, |
| xf.style, xf.tgt_name, str(xf.tgt_ranges)) |
| |
| elif xf.style == "new": |
| self.tgt.WriteRangeDataToFd(xf.tgt_ranges, new_f) |
| tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize |
| logger.info( |
| "%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0, |
| xf.style, xf.tgt_name, str(xf.tgt_ranges)) |
| |
| elif xf.style == "diff": |
| # We can't compare src and tgt directly because they may have |
| # the same content but be broken up into blocks differently, eg: |
| # |
| # ["he", "llo"] vs ["h", "ello"] |
| # |
| # We want those to compare equal, ideally without having to |
| # actually concatenate the strings (these may be tens of |
| # megabytes). |
| if xf.src_sha1 == xf.tgt_sha1: |
| # These are identical; we don't need to generate a patch, |
| # just issue copy commands on the device. |
| xf.style = "move" |
| xf.patch_info = None |
| tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize |
| if xf.src_ranges != xf.tgt_ranges: |
| logger.info( |
| "%10d %10d (%6.2f%%) %7s %s %s (from %s)", tgt_size, tgt_size, |
| 100.0, xf.style, |
| xf.tgt_name if xf.tgt_name == xf.src_name else ( |
| xf.tgt_name + " (from " + xf.src_name + ")"), |
| str(xf.tgt_ranges), str(xf.src_ranges)) |
| else: |
| if xf.patch_info: |
| # We have already generated the patch (e.g. during split of large |
| # APKs or reduction of stash size) |
| imgdiff = xf.patch_info.imgdiff |
| else: |
| imgdiff = self.CanUseImgdiff( |
| xf.tgt_name, xf.tgt_ranges, xf.src_ranges) |
| xf.style = "imgdiff" if imgdiff else "bsdiff" |
| diff_queue.append((index, imgdiff, patch_num)) |
| patch_num += 1 |
| |
| else: |
| assert False, "unknown style " + xf.style |
| |
| patches = self.ComputePatchesForInputList(diff_queue, False) |
| |
| offset = 0 |
| with open(prefix + ".patch.dat", "wb") as patch_fd: |
| for index, patch_info, _ in patches: |
| xf = self.transfers[index] |
| xf.patch_len = len(patch_info.content) |
| xf.patch_start = offset |
| offset += xf.patch_len |
| patch_fd.write(patch_info.content) |
| |
| tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize |
| logger.info( |
| "%10d %10d (%6.2f%%) %7s %s %s %s", xf.patch_len, tgt_size, |
| xf.patch_len * 100.0 / tgt_size, xf.style, |
| xf.tgt_name if xf.tgt_name == xf.src_name else ( |
| xf.tgt_name + " (from " + xf.src_name + ")"), |
| xf.tgt_ranges, xf.src_ranges) |
| |
| def AssertSha1Good(self): |
| """Check the SHA-1 of the src & tgt blocks in the transfer list. |
| |
| Double check the SHA-1 value to avoid the issue in b/71908713, where |
| SparseImage.RangeSha1() messed up with the hash calculation in multi-thread |
| environment. That specific problem has been fixed by protecting the |
| underlying generator function 'SparseImage._GetRangeData()' with lock. |
| """ |
| for xf in self.transfers: |
| tgt_sha1 = self.tgt.RangeSha1(xf.tgt_ranges) |
| assert xf.tgt_sha1 == tgt_sha1 |
| if xf.style == "diff": |
| src_sha1 = self.src.RangeSha1(xf.src_ranges) |
| assert xf.src_sha1 == src_sha1 |
| |
| def AssertSequenceGood(self): |
| # Simulate the sequences of transfers we will output, and check that: |
| # - we never read a block after writing it, and |
| # - we write every block we care about exactly once. |
| |
| # Start with no blocks having been touched yet. |
| touched = array.array("B", b"\0" * self.tgt.total_blocks) |
| |
| # Imagine processing the transfers in order. |
| for xf in self.transfers: |
| # Check that the input blocks for this transfer haven't yet been touched. |
| |
| x = xf.src_ranges |
| for _, sr in xf.use_stash: |
| x = x.subtract(sr) |
| |
| for s, e in x: |
| # Source image could be larger. Don't check the blocks that are in the |
| # source image only. Since they are not in 'touched', and won't ever |
| # be touched. |
| for i in range(s, min(e, self.tgt.total_blocks)): |
| assert touched[i] == 0 |
| |
| # Check that the output blocks for this transfer haven't yet |
| # been touched, and touch all the blocks written by this |
| # transfer. |
| for s, e in xf.tgt_ranges: |
| for i in range(s, e): |
| assert touched[i] == 0 |
| touched[i] = 1 |
| |
| # Check that we've written every target block. |
| for s, e in self.tgt.care_map: |
| for i in range(s, e): |
| assert touched[i] == 1 |
| |
| def FindSequenceForTransfers(self): |
| """Finds a sequence for the given transfers. |
| |
| The goal is to minimize the violation of order dependencies between these |
| transfers, so that fewer blocks are stashed when applying the update. |
| """ |
| |
| # Clear the existing dependency between transfers |
| for xf in self.transfers: |
| xf.goes_before = OrderedDict() |
| xf.goes_after = OrderedDict() |
| |
| xf.stash_before = [] |
| xf.use_stash = [] |
| |
| # Find the ordering dependencies among transfers (this is O(n^2) |
| # in the number of transfers). |
| self.GenerateDigraph() |
| # Find a sequence of transfers that satisfies as many ordering |
| # dependencies as possible (heuristically). |
| self.FindVertexSequence() |
| # Fix up the ordering dependencies that the sequence didn't |
| # satisfy. |
| self.ReverseBackwardEdges() |
| self.ImproveVertexSequence() |
| |
| def ImproveVertexSequence(self): |
| logger.info("Improving vertex order...") |
| |
| # At this point our digraph is acyclic; we reversed any edges that |
| # were backwards in the heuristically-generated sequence. The |
| # previously-generated order is still acceptable, but we hope to |
| # find a better order that needs less memory for stashed data. |
| # Now we do a topological sort to generate a new vertex order, |
| # using a greedy algorithm to choose which vertex goes next |
| # whenever we have a choice. |
| |
| # Make a copy of the edge set; this copy will get destroyed by the |
| # algorithm. |
| for xf in self.transfers: |
| xf.incoming = xf.goes_after.copy() |
| xf.outgoing = xf.goes_before.copy() |
| |
| L = [] # the new vertex order |
| |
| # S is the set of sources in the remaining graph; we always choose |
| # the one that leaves the least amount of stashed data after it's |
| # executed. |
| S = [(u.NetStashChange(), u.order, u) for u in self.transfers |
| if not u.incoming] |
| heapq.heapify(S) |
| |
| while S: |
| _, _, xf = heapq.heappop(S) |
| L.append(xf) |
| for u in xf.outgoing: |
| del u.incoming[xf] |
| if not u.incoming: |
| heapq.heappush(S, (u.NetStashChange(), u.order, u)) |
| |
| # if this fails then our graph had a cycle. |
| assert len(L) == len(self.transfers) |
| |
| self.transfers = L |
| for i, xf in enumerate(L): |
| xf.order = i |
| |
| def ReverseBackwardEdges(self): |
| """Reverse unsatisfying edges and compute pairs of stashed blocks. |
| |
| For each transfer, make sure it properly stashes the blocks it touches and |
| will be used by later transfers. It uses pairs of (stash_raw_id, range) to |
| record the blocks to be stashed. 'stash_raw_id' is an id that uniquely |
| identifies each pair. Note that for the same range (e.g. RangeSet("1-5")), |
| it is possible to have multiple pairs with different 'stash_raw_id's. Each |
| 'stash_raw_id' will be consumed by one transfer. In BBOTA v3+, identical |
| blocks will be written to the same stash slot in WriteTransfers(). |
| """ |
| |
| logger.info("Reversing backward edges...") |
| in_order = 0 |
| out_of_order = 0 |
| stash_raw_id = 0 |
| stash_size = 0 |
| |
| for xf in self.transfers: |
| for u in xf.goes_before.copy(): |
| # xf should go before u |
| if xf.order < u.order: |
| # it does, hurray! |
| in_order += 1 |
| else: |
| # it doesn't, boo. modify u to stash the blocks that it |
| # writes that xf wants to read, and then require u to go |
| # before xf. |
| out_of_order += 1 |
| |
| overlap = xf.src_ranges.intersect(u.tgt_ranges) |
| assert overlap |
| |
| u.stash_before.append((stash_raw_id, overlap)) |
| xf.use_stash.append((stash_raw_id, overlap)) |
| stash_raw_id += 1 |
| stash_size += overlap.size() |
| |
| # reverse the edge direction; now xf must go after u |
| del xf.goes_before[u] |
| del u.goes_after[xf] |
| xf.goes_after[u] = None # value doesn't matter |
| u.goes_before[xf] = None |
| |
| logger.info( |
| " %d/%d dependencies (%.2f%%) were violated; %d source blocks " |
| "stashed.", out_of_order, in_order + out_of_order, |
| (out_of_order * 100.0 / (in_order + out_of_order)) if ( |
| in_order + out_of_order) else 0.0, |
| stash_size) |
| |
| def FindVertexSequence(self): |
| logger.info("Finding vertex sequence...") |
| |
| # This is based on "A Fast & Effective Heuristic for the Feedback |
| # Arc Set Problem" by P. Eades, X. Lin, and W.F. Smyth. Think of |
| # it as starting with the digraph G and moving all the vertices to |
| # be on a horizontal line in some order, trying to minimize the |
| # number of edges that end up pointing to the left. Left-pointing |
| # edges will get removed to turn the digraph into a DAG. In this |
| # case each edge has a weight which is the number of source blocks |
| # we'll lose if that edge is removed; we try to minimize the total |
| # weight rather than just the number of edges. |
| |
| # Make a copy of the edge set; this copy will get destroyed by the |
| # algorithm. |
| for xf in self.transfers: |
| xf.incoming = xf.goes_after.copy() |
| xf.outgoing = xf.goes_before.copy() |
| xf.score = sum(xf.outgoing.values()) - sum(xf.incoming.values()) |
| |
| # We use an OrderedDict instead of just a set so that the output |
| # is repeatable; otherwise it would depend on the hash values of |
| # the transfer objects. |
| G = OrderedDict() |
| for xf in self.transfers: |
| G[xf] = None |
| s1 = deque() # the left side of the sequence, built from left to right |
| s2 = deque() # the right side of the sequence, built from right to left |
| |
| heap = [] |
| for xf in self.transfers: |
| xf.heap_item = HeapItem(xf) |
| heap.append(xf.heap_item) |
| heapq.heapify(heap) |
| |
| # Use OrderedDict() instead of set() to preserve the insertion order. Need |
| # to use 'sinks[key] = None' to add key into the set. sinks will look like |
| # { key1: None, key2: None, ... }. |
| sinks = OrderedDict.fromkeys(u for u in G if not u.outgoing) |
| sources = OrderedDict.fromkeys(u for u in G if not u.incoming) |
| |
| def adjust_score(iu, delta): |
| iu.score += delta |
| iu.heap_item.clear() |
| iu.heap_item = HeapItem(iu) |
| heapq.heappush(heap, iu.heap_item) |
| |
| while G: |
| # Put all sinks at the end of the sequence. |
| while sinks: |
| new_sinks = OrderedDict() |
| for u in sinks: |
| if u not in G: |
| continue |
| s2.appendleft(u) |
| del G[u] |
| for iu in u.incoming: |
| adjust_score(iu, -iu.outgoing.pop(u)) |
| if not iu.outgoing: |
| new_sinks[iu] = None |
| sinks = new_sinks |
| |
| # Put all the sources at the beginning of the sequence. |
| while sources: |
| new_sources = OrderedDict() |
| for u in sources: |
| if u not in G: |
| continue |
| s1.append(u) |
| del G[u] |
| for iu in u.outgoing: |
| adjust_score(iu, +iu.incoming.pop(u)) |
| if not iu.incoming: |
| new_sources[iu] = None |
| sources = new_sources |
| |
| if not G: |
| break |
| |
| # Find the "best" vertex to put next. "Best" is the one that |
| # maximizes the net difference in source blocks saved we get by |
| # pretending it's a source rather than a sink. |
| |
| while True: |
| u = heapq.heappop(heap) |
| if u and u.item in G: |
| u = u.item |
| break |
| |
| s1.append(u) |
| del G[u] |
| for iu in u.outgoing: |
| adjust_score(iu, +iu.incoming.pop(u)) |
| if not iu.incoming: |
| sources[iu] = None |
| |
| for iu in u.incoming: |
| adjust_score(iu, -iu.outgoing.pop(u)) |
| if not iu.outgoing: |
| sinks[iu] = None |
| |
| # Now record the sequence in the 'order' field of each transfer, |
| # and by rearranging self.transfers to be in the chosen sequence. |
| |
| new_transfers = [] |
| for x in itertools.chain(s1, s2): |
| x.order = len(new_transfers) |
| new_transfers.append(x) |
| del x.incoming |
| del x.outgoing |
| |
| self.transfers = new_transfers |
| |
| def GenerateDigraph(self): |
| logger.info("Generating digraph...") |
| |
| # Each item of source_ranges will be: |
| # - None, if that block is not used as a source, |
| # - an ordered set of transfers. |
| source_ranges = [] |
| for b in self.transfers: |
| for s, e in b.src_ranges: |
| if e > len(source_ranges): |
| source_ranges.extend([None] * (e-len(source_ranges))) |
| for i in range(s, e): |
| if source_ranges[i] is None: |
| source_ranges[i] = OrderedDict.fromkeys([b]) |
| else: |
| source_ranges[i][b] = None |
| |
| for a in self.transfers: |
| intersections = OrderedDict() |
| for s, e in a.tgt_ranges: |
| for i in range(s, e): |
| if i >= len(source_ranges): |
| break |
| # Add all the Transfers in source_ranges[i] to the (ordered) set. |
| if source_ranges[i] is not None: |
| for j in source_ranges[i]: |
| intersections[j] = None |
| |
| for b in intersections: |
| if a is b: |
| continue |
| |
| # If the blocks written by A are read by B, then B needs to go before A. |
| i = a.tgt_ranges.intersect(b.src_ranges) |
| if i: |
| if b.src_name == "__ZERO": |
| # the cost of removing source blocks for the __ZERO domain |
| # is (nearly) zero. |
| size = 0 |
| else: |
| size = i.size() |
| b.goes_before[a] = size |
| a.goes_after[b] = size |
| |
| def ComputePatchesForInputList(self, diff_queue, compress_target): |
| """Returns a list of patch information for the input list of transfers. |
| |
| Args: |
| diff_queue: a list of transfers with style 'diff' |
| compress_target: If True, compresses the target ranges of each |
| transfers; and save the size. |
| |
| Returns: |
| A list of (transfer order, patch_info, compressed_size) tuples. |
| """ |
| |
| if not diff_queue: |
| return [] |
| |
| if self.threads > 1: |
| logger.info("Computing patches (using %d threads)...", self.threads) |
| else: |
| logger.info("Computing patches...") |
| |
| diff_total = len(diff_queue) |
| patches = [None] * diff_total |
| error_messages = [] |
| |
| # Using multiprocessing doesn't give additional benefits, due to the |
| # pattern of the code. The diffing work is done by subprocess.call, which |
| # already runs in a separate process (not affected much by the GIL - |
| # Global Interpreter Lock). Using multiprocess also requires either a) |
| # writing the diff input files in the main process before forking, or b) |
| # reopening the image file (SparseImage) in the worker processes. Doing |
| # neither of them further improves the performance. |
| lock = threading.Lock() |
| |
| def diff_worker(): |
| while True: |
| with lock: |
| if not diff_queue: |
| return |
| xf_index, imgdiff, patch_index = diff_queue.pop() |
| xf = self.transfers[xf_index] |
| |
| message = [] |
| compressed_size = None |
| |
| patch_info = xf.patch_info |
| if not patch_info: |
| src_file = common.MakeTempFile(prefix="src-") |
| with open(src_file, "wb") as fd: |
| self.src.WriteRangeDataToFd(xf.src_ranges, fd) |
| |
| tgt_file = common.MakeTempFile(prefix="tgt-") |
| with open(tgt_file, "wb") as fd: |
| self.tgt.WriteRangeDataToFd(xf.tgt_ranges, fd) |
| |
| try: |
| patch_info = compute_patch(src_file, tgt_file, imgdiff) |
| except ValueError as e: |
| message.append( |
| "Failed to generate %s for %s: tgt=%s, src=%s:\n%s" % ( |
| "imgdiff" if imgdiff else "bsdiff", |
| xf.tgt_name if xf.tgt_name == xf.src_name else |
| xf.tgt_name + " (from " + xf.src_name + ")", |
| xf.tgt_ranges, xf.src_ranges, e.message)) |
| |
| if compress_target: |
| tgt_data = self.tgt.ReadRangeSet(xf.tgt_ranges) |
| try: |
| # Compresses with the default level |
| compress_obj = zlib.compressobj(6, zlib.DEFLATED, -zlib.MAX_WBITS) |
| compressed_data = (compress_obj.compress(b"".join(tgt_data)) |
| + compress_obj.flush()) |
| compressed_size = len(compressed_data) |
| except zlib.error as e: |
| message.append( |
| "Failed to compress the data in target range {} for {}:\n" |
| "{}".format(xf.tgt_ranges, xf.tgt_name, e.message)) |
| |
| if message: |
| with lock: |
| error_messages.extend(message) |
| |
| with lock: |
| patches[patch_index] = (xf_index, patch_info, compressed_size) |
| |
| threads = [threading.Thread(target=diff_worker) |
| for _ in range(self.threads)] |
| for th in threads: |
| th.start() |
| while threads: |
| threads.pop().join() |
| |
| if error_messages: |
| logger.error('ERROR:') |
| logger.error('\n'.join(error_messages)) |
| logger.error('\n\n\n') |
| sys.exit(1) |
| |
| return patches |
| |
| def SelectAndConvertDiffTransfersToNew(self, violated_stash_blocks): |
| """Converts the diff transfers to reduce the max simultaneous stash. |
| |
| Since the 'new' data is compressed with deflate, we can select the 'diff' |
| transfers for conversion by comparing its patch size with the size of the |
| compressed data. Ideally, we want to convert the transfers with a small |
| size increase, but using a large number of stashed blocks. |
| """ |
| TransferSizeScore = namedtuple("TransferSizeScore", |
| "xf, used_stash_blocks, score") |
| |
| logger.info("Selecting diff commands to convert to new.") |
| diff_queue = [] |
| for xf in self.transfers: |
| if xf.style == "diff" and xf.src_sha1 != xf.tgt_sha1: |
| use_imgdiff = self.CanUseImgdiff(xf.tgt_name, xf.tgt_ranges, |
| xf.src_ranges) |
| diff_queue.append((xf.order, use_imgdiff, len(diff_queue))) |
| |
| # Remove the 'move' transfers, and compute the patch & compressed size |
| # for the remaining. |
| result = self.ComputePatchesForInputList(diff_queue, True) |
| |
| conversion_candidates = [] |
| for xf_index, patch_info, compressed_size in result: |
| xf = self.transfers[xf_index] |
| if not xf.patch_info: |
| xf.patch_info = patch_info |
| |
| size_ratio = len(xf.patch_info.content) * 100.0 / compressed_size |
| diff_style = "imgdiff" if xf.patch_info.imgdiff else "bsdiff" |
| logger.info("%s, target size: %d blocks, style: %s, patch size: %d," |
| " compression_size: %d, ratio %.2f%%", xf.tgt_name, |
| xf.tgt_ranges.size(), diff_style, |
| len(xf.patch_info.content), compressed_size, size_ratio) |
| |
| used_stash_blocks = sum(sr.size() for _, sr in xf.use_stash) |
| # Convert the transfer to new if the compressed size is smaller or equal. |
| # We don't need to maintain the stash_before lists here because the |
| # graph will be regenerated later. |
| if len(xf.patch_info.content) >= compressed_size: |
| # Add the transfer to the candidate list with negative score. And it |
| # will be converted later. |
| conversion_candidates.append(TransferSizeScore(xf, used_stash_blocks, |
| -1)) |
| elif used_stash_blocks > 0: |
| # This heuristic represents the size increase in the final package to |
| # remove per unit of stashed data. |
| score = ((compressed_size - len(xf.patch_info.content)) * 100.0 |
| / used_stash_blocks) |
| conversion_candidates.append(TransferSizeScore(xf, used_stash_blocks, |
| score)) |
| # Transfers with lower score (i.e. less expensive to convert) will be |
| # converted first. |
| conversion_candidates.sort(key=lambda x: x.score) |
| |
| # TODO(xunchang), improve the logic to find the transfers to convert, e.g. |
| # convert the ones that contribute to the max stash, run ReviseStashSize |
| # multiple times etc. |
| removed_stashed_blocks = 0 |
| for xf, used_stash_blocks, _ in conversion_candidates: |
| logger.info("Converting %s to new", xf.tgt_name) |
| xf.ConvertToNew() |
| removed_stashed_blocks += used_stash_blocks |
| # Experiments show that we will get a smaller package size if we remove |
| # slightly more stashed blocks than the violated stash blocks. |
| if removed_stashed_blocks >= violated_stash_blocks: |
| break |
| |
| logger.info("Removed %d stashed blocks", removed_stashed_blocks) |
| |
| def FindTransfers(self): |
| """Parse the file_map to generate all the transfers.""" |
| |
| def AddSplitTransfersWithFixedSizeChunks(tgt_name, src_name, tgt_ranges, |
| src_ranges, style, by_id): |
| """Add one or multiple Transfer()s by splitting large files. |
| |
| For BBOTA v3, we need to stash source blocks for resumable feature. |
| However, with the growth of file size and the shrink of the cache |
| partition source blocks are too large to be stashed. If a file occupies |
| too many blocks, we split it into smaller pieces by getting multiple |
| Transfer()s. |
| |
| The downside is that after splitting, we may increase the package size |
| since the split pieces don't align well. According to our experiments, |
| 1/8 of the cache size as the per-piece limit appears to be optimal. |
| Compared to the fixed 1024-block limit, it reduces the overall package |
| size by 30% for volantis, and 20% for angler and bullhead.""" |
| |
| pieces = 0 |
| while (tgt_ranges.size() > max_blocks_per_transfer and |
| src_ranges.size() > max_blocks_per_transfer): |
| tgt_split_name = "%s-%d" % (tgt_name, pieces) |
| src_split_name = "%s-%d" % (src_name, pieces) |
| tgt_first = tgt_ranges.first(max_blocks_per_transfer) |
| src_first = src_ranges.first(max_blocks_per_transfer) |
| |
| Transfer(tgt_split_name, src_split_name, tgt_first, src_first, |
| self.tgt.RangeSha1(tgt_first), self.src.RangeSha1(src_first), |
| style, by_id) |
| |
| tgt_ranges = tgt_ranges.subtract(tgt_first) |
| src_ranges = src_ranges.subtract(src_first) |
| pieces += 1 |
| |
| # Handle remaining blocks. |
| if tgt_ranges.size() or src_ranges.size(): |
| # Must be both non-empty. |
| assert tgt_ranges.size() and src_ranges.size() |
| tgt_split_name = "%s-%d" % (tgt_name, pieces) |
| src_split_name = "%s-%d" % (src_name, pieces) |
| Transfer(tgt_split_name, src_split_name, tgt_ranges, src_ranges, |
| self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges), |
| style, by_id) |
| |
| def AddSplitTransfers(tgt_name, src_name, tgt_ranges, src_ranges, style, |
| by_id): |
| """Find all the zip files and split the others with a fixed chunk size. |
| |
| This function will construct a list of zip archives, which will later be |
| split by imgdiff to reduce the final patch size. For the other files, |
| we will plainly split them based on a fixed chunk size with the potential |
| patch size penalty. |
| """ |
| |
| assert style == "diff" |
| |
| # Change nothing for small files. |
| if (tgt_ranges.size() <= max_blocks_per_transfer and |
| src_ranges.size() <= max_blocks_per_transfer): |
| Transfer(tgt_name, src_name, tgt_ranges, src_ranges, |
| self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges), |
| style, by_id) |
| return |
| |
| # Split large APKs with imgdiff, if possible. We're intentionally checking |
| # file types one more time (CanUseImgdiff() checks that as well), before |
| # calling the costly RangeSha1()s. |
| if (self.FileTypeSupportedByImgdiff(tgt_name) and |
| self.tgt.RangeSha1(tgt_ranges) != self.src.RangeSha1(src_ranges)): |
| if self.CanUseImgdiff(tgt_name, tgt_ranges, src_ranges, True): |
| large_apks.append((tgt_name, src_name, tgt_ranges, src_ranges)) |
| return |
| |
| AddSplitTransfersWithFixedSizeChunks(tgt_name, src_name, tgt_ranges, |
| src_ranges, style, by_id) |
| |
| def AddTransfer(tgt_name, src_name, tgt_ranges, src_ranges, style, by_id, |
| split=False): |
| """Wrapper function for adding a Transfer().""" |
| |
| # We specialize diff transfers only (which covers bsdiff/imgdiff/move); |
| # otherwise add the Transfer() as is. |
| if style != "diff" or not split: |
| Transfer(tgt_name, src_name, tgt_ranges, src_ranges, |
| self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges), |
| style, by_id) |
| return |
| |
| # Handle .odex files specially to analyze the block-wise difference. If |
| # most of the blocks are identical with only few changes (e.g. header), |
| # we will patch the changed blocks only. This avoids stashing unchanged |
| # blocks while patching. We limit the analysis to files without size |
| # changes only. This is to avoid sacrificing the OTA generation cost too |
| # much. |
| if (tgt_name.split(".")[-1].lower() == 'odex' and |
| tgt_ranges.size() == src_ranges.size()): |
| |
| # 0.5 threshold can be further tuned. The tradeoff is: if only very |
| # few blocks remain identical, we lose the opportunity to use imgdiff |
| # that may have better compression ratio than bsdiff. |
| crop_threshold = 0.5 |
| |
| tgt_skipped = RangeSet() |
| src_skipped = RangeSet() |
| tgt_size = tgt_ranges.size() |
| tgt_changed = 0 |
| for src_block, tgt_block in zip(src_ranges.next_item(), |
| tgt_ranges.next_item()): |
| src_rs = RangeSet(str(src_block)) |
| tgt_rs = RangeSet(str(tgt_block)) |
| if self.src.ReadRangeSet(src_rs) == self.tgt.ReadRangeSet(tgt_rs): |
| tgt_skipped = tgt_skipped.union(tgt_rs) |
| src_skipped = src_skipped.union(src_rs) |
| else: |
| tgt_changed += tgt_rs.size() |
| |
| # Terminate early if no clear sign of benefits. |
| if tgt_changed > tgt_size * crop_threshold: |
| break |
| |
| if tgt_changed < tgt_size * crop_threshold: |
| assert tgt_changed + tgt_skipped.size() == tgt_size |
| logger.info( |
| '%10d %10d (%6.2f%%) %s', tgt_skipped.size(), tgt_size, |
| tgt_skipped.size() * 100.0 / tgt_size, tgt_name) |
| AddSplitTransfers( |
| "%s-skipped" % (tgt_name,), |
| "%s-skipped" % (src_name,), |
| tgt_skipped, src_skipped, style, by_id) |
| |
| # Intentionally change the file extension to avoid being imgdiff'd as |
| # the files are no longer in their original format. |
| tgt_name = "%s-cropped" % (tgt_name,) |
| src_name = "%s-cropped" % (src_name,) |
| tgt_ranges = tgt_ranges.subtract(tgt_skipped) |
| src_ranges = src_ranges.subtract(src_skipped) |
| |
| # Possibly having no changed blocks. |
| if not tgt_ranges: |
| return |
| |
| # Add the transfer(s). |
| AddSplitTransfers( |
| tgt_name, src_name, tgt_ranges, src_ranges, style, by_id) |
| |
| def ParseAndValidateSplitInfo(patch_size, tgt_ranges, src_ranges, |
| split_info): |
| """Parse the split_info and return a list of info tuples. |
| |
| Args: |
| patch_size: total size of the patch file. |
| tgt_ranges: Ranges of the target file within the original image. |
| src_ranges: Ranges of the source file within the original image. |
| split_info format: |
| imgdiff version# |
| count of pieces |
| <patch_size_1> <tgt_size_1> <src_ranges_1> |
| ... |
| <patch_size_n> <tgt_size_n> <src_ranges_n> |
| |
| Returns: |
| [patch_start, patch_len, split_tgt_ranges, split_src_ranges] |
| """ |
| |
| version = int(split_info[0]) |
| assert version == 2 |
| count = int(split_info[1]) |
| assert len(split_info) - 2 == count |
| |
| split_info_list = [] |
| patch_start = 0 |
| tgt_remain = copy.deepcopy(tgt_ranges) |
| # each line has the format <patch_size>, <tgt_size>, <src_ranges> |
| for line in split_info[2:]: |
| info = line.split() |
| assert len(info) == 3 |
| patch_length = int(info[0]) |
| |
| split_tgt_size = int(info[1]) |
| assert split_tgt_size % 4096 == 0 |
| assert split_tgt_size // 4096 <= tgt_remain.size() |
| split_tgt_ranges = tgt_remain.first(split_tgt_size // 4096) |
| tgt_remain = tgt_remain.subtract(split_tgt_ranges) |
| |
| # Find the split_src_ranges within the image file from its relative |
| # position in file. |
| split_src_indices = RangeSet.parse_raw(info[2]) |
| split_src_ranges = RangeSet() |
| for r in split_src_indices: |
| curr_range = src_ranges.first(r[1]).subtract(src_ranges.first(r[0])) |
| assert not split_src_ranges.overlaps(curr_range) |
| split_src_ranges = split_src_ranges.union(curr_range) |
| |
| split_info_list.append((patch_start, patch_length, |
| split_tgt_ranges, split_src_ranges)) |
| patch_start += patch_length |
| |
| # Check that the sizes of all the split pieces add up to the final file |
| # size for patch and target. |
| assert tgt_remain.size() == 0 |
| assert patch_start == patch_size |
| return split_info_list |
| |
| def SplitLargeApks(): |
| """Split the large apks files. |
| |
| Example: Chrome.apk will be split into |
| src-0: Chrome.apk-0, tgt-0: Chrome.apk-0 |
| src-1: Chrome.apk-1, tgt-1: Chrome.apk-1 |
| ... |
| |
| After the split, the target pieces are continuous and block aligned; and |
| the source pieces are mutually exclusive. During the split, we also |
| generate and save the image patch between src-X & tgt-X. This patch will |
| be valid because the block ranges of src-X & tgt-X will always stay the |
| same afterwards; but there's a chance we don't use the patch if we |
| convert the "diff" command into "new" or "move" later. |
| """ |
| |
| while True: |
| with transfer_lock: |
| if not large_apks: |
| return |
| tgt_name, src_name, tgt_ranges, src_ranges = large_apks.pop(0) |
| |
| src_file = common.MakeTempFile(prefix="src-") |
| tgt_file = common.MakeTempFile(prefix="tgt-") |
| with open(src_file, "wb") as src_fd: |
| self.src.WriteRangeDataToFd(src_ranges, src_fd) |
| with open(tgt_file, "wb") as tgt_fd: |
| self.tgt.WriteRangeDataToFd(tgt_ranges, tgt_fd) |
| |
| patch_file = common.MakeTempFile(prefix="patch-") |
| patch_info_file = common.MakeTempFile(prefix="split_info-") |
| cmd = ["imgdiff", "-z", |
| "--block-limit={}".format(max_blocks_per_transfer), |
| "--split-info=" + patch_info_file, |
| src_file, tgt_file, patch_file] |
| proc = common.Run(cmd) |
| imgdiff_output, _ = proc.communicate() |
| assert proc.returncode == 0, \ |
| "Failed to create imgdiff patch between {} and {}:\n{}".format( |
| src_name, tgt_name, imgdiff_output) |
| |
| with open(patch_info_file) as patch_info: |
| lines = patch_info.readlines() |
| |
| patch_size_total = os.path.getsize(patch_file) |
| split_info_list = ParseAndValidateSplitInfo(patch_size_total, |
| tgt_ranges, src_ranges, |
| lines) |
| for index, (patch_start, patch_length, split_tgt_ranges, |
| split_src_ranges) in enumerate(split_info_list): |
| with open(patch_file, 'rb') as f: |
| f.seek(patch_start) |
| patch_content = f.read(patch_length) |
| |
| split_src_name = "{}-{}".format(src_name, index) |
| split_tgt_name = "{}-{}".format(tgt_name, index) |
| split_large_apks.append((split_tgt_name, |
| split_src_name, |
| split_tgt_ranges, |
| split_src_ranges, |
| patch_content)) |
| |
| logger.info("Finding transfers...") |
| |
| large_apks = [] |
| split_large_apks = [] |
| cache_size = common.OPTIONS.cache_size |
| split_threshold = 0.125 |
| assert cache_size is not None |
| max_blocks_per_transfer = int(cache_size * split_threshold / |
| self.tgt.blocksize) |
| empty = RangeSet() |
| for tgt_fn, tgt_ranges in sorted(self.tgt.file_map.items()): |
| if tgt_fn == "__ZERO": |
| # the special "__ZERO" domain is all the blocks not contained |
| # in any file and that are filled with zeros. We have a |
| # special transfer style for zero blocks. |
| src_ranges = self.src.file_map.get("__ZERO", empty) |
| AddTransfer(tgt_fn, "__ZERO", tgt_ranges, src_ranges, |
| "zero", self.transfers) |
| continue |
| |
| elif tgt_fn == "__COPY": |
| # "__COPY" domain includes all the blocks not contained in any |
| # file and that need to be copied unconditionally to the target. |
| AddTransfer(tgt_fn, None, tgt_ranges, empty, "new", self.transfers) |
| continue |
| |
| elif tgt_fn == "__HASHTREE": |
| continue |
| |
| elif tgt_fn in self.src.file_map: |
| # Look for an exact pathname match in the source. |
| AddTransfer(tgt_fn, tgt_fn, tgt_ranges, self.src.file_map[tgt_fn], |
| "diff", self.transfers, True) |
| continue |
| |
| b = os.path.basename(tgt_fn) |
| if b in self.src_basenames: |
| # Look for an exact basename match in the source. |
| src_fn = self.src_basenames[b] |
| AddTransfer(tgt_fn, src_fn, tgt_ranges, self.src.file_map[src_fn], |
| "diff", self.transfers, True) |
| continue |
| |
| b = re.sub("[0-9]+", "#", b) |
| if b in self.src_numpatterns: |
| # Look for a 'number pattern' match (a basename match after |
| # all runs of digits are replaced by "#"). (This is useful |
| # for .so files that contain version numbers in the filename |
| # that get bumped.) |
| src_fn = self.src_numpatterns[b] |
| AddTransfer(tgt_fn, src_fn, tgt_ranges, self.src.file_map[src_fn], |
| "diff", self.transfers, True) |
| continue |
| |
| AddTransfer(tgt_fn, None, tgt_ranges, empty, "new", self.transfers) |
| |
| transfer_lock = threading.Lock() |
| threads = [threading.Thread(target=SplitLargeApks) |
| for _ in range(self.threads)] |
| for th in threads: |
| th.start() |
| while threads: |
| threads.pop().join() |
| |
| # Sort the split transfers for large apks to generate a determinate package. |
| split_large_apks.sort() |
| for (tgt_name, src_name, tgt_ranges, src_ranges, |
| patch) in split_large_apks: |
| transfer_split = Transfer(tgt_name, src_name, tgt_ranges, src_ranges, |
| self.tgt.RangeSha1(tgt_ranges), |
| self.src.RangeSha1(src_ranges), |
| "diff", self.transfers) |
| transfer_split.patch_info = PatchInfo(True, patch) |
| |
| def AbbreviateSourceNames(self): |
| for k in self.src.file_map.keys(): |
| b = os.path.basename(k) |
| self.src_basenames[b] = k |
| b = re.sub("[0-9]+", "#", b) |
| self.src_numpatterns[b] = k |
| |
| @staticmethod |
| def AssertPartition(total, seq): |
| """Assert that all the RangeSets in 'seq' form a partition of the |
| 'total' RangeSet (ie, they are nonintersecting and their union |
| equals 'total').""" |
| |
| so_far = RangeSet() |
| for i in seq: |
| assert not so_far.overlaps(i) |
| so_far = so_far.union(i) |
| assert so_far == total |