CleanSpec.mk - LeafOS-Project/android_art - Gitiles

 # Copyright (C) 2014 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # If you don't need to do a full clean build but would like to touch
 # a file or delete some intermediate files, add a clean step to the end
 # of the list.  These steps will only be run once, if they haven't been
 # run before.
 #
 # E.g.:
 #     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
 #     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
 #
 # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
 # files that are missing or have been moved.
 #
 # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
 # Use $(OUT_DIR) to refer to the "out" directory.
 #
 # If you need to re-do something that's already mentioned, just copy
 # the command and add it to the bottom of the list.  E.g., if a change
 # that you made last week required touching a file and a change you
 # made today requires touching the same file, just copy the old
 # touch step and add it to the end of the list.
 #
 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************

 # For example:
 #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
 #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
 #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
 #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)

 # Switching to jemalloc requires deleting these files.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libart_*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libartd_*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libart_*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libartd_*)

 # Old Android Runtime APEX package, before the introduction of "release" and "debug" packages.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.runtime.apex)

 # Clean up ICU libraries moved to runtime apex
 $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libandroidicu.so)
 $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libpac.so)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/art_libdexfile_support_tests/dex_file_supp_test)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)

 # Clean up duplicate compiles between static and shared compiles of libart and libartd
 $(call add-clean-step, rm -rf $(OUT_DIR)/soong/.intermediates/art/runtime/libart/*shared*/obj)
 $(call add-clean-step, rm -rf $(OUT_DIR)/soong/.intermediates/art/runtime/libartd/*shared*/obj)

 # Force regeneration of .apex files after removal of time zone data files from the runtime APEX
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.runtime.*)

 # Remove artifacts that used to be generated (as a workaround for
 # improper Runtime APEX support) by tools/buildbot-build.sh via the
 # `standalone-apex-files` Make rule.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*)
 # Remove artifacts that used to be generated (as a workaround for
 # improper Runtime APEX support) by tools/buildbot-build.sh via the
 # `icu-data-art-test` Make rule.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/icu)

 # Remove ART test target artifacts.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)

 # Remove all APEX artifacts after the change to use the Testing
 # Runtime APEX in lieu of the Debug Runtime APEX for ART testing.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)

 # Remove the icu .dat file from /apex/com.android.runtime and the host equivalent.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)
 $(call add-clean-step, rm -rf $(HOST_OUT)/com.android.runtime/etc/icu/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/icu)

 # Remove all APEX artifacts for the Runtime/ART APEX split.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)
 $(call add-clean-step, rm -rf $(HOST_OUT)/apex)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/apex)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/apex)

 # Remove dex2oat artifacts for boot image extensions (workaround for broken dependencies).
 $(call add-clean-step, find $(OUT_DIR) -name "*.oat" -o -name "*.odex" -o -name "*.art" -o -name '*.vdex' | xargs rm -f)
 $(call add-clean-step, find $(OUT_DIR) -name "*.oat" -o -name "*.odex" -o -name "*.art" -o -name '*.vdex' | xargs rm -f)
 $(call add-clean-step, find $(OUT_DIR) -name "*.oat" -o -name "*.odex" -o -name "*.art" -o -name '*.vdex' | xargs rm -f)

 # Remove empty dir for art APEX because it will be created on demand while mounting release|debug
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.art)

 # Remove 'libart[d]?-simulator-container.so' which was briefly in the ART AREX.
 $(call add-clean-step, find $(OUT_DIR)/soong/.intermediates/art -name 'libart*-simulator-container.so' -type f | xargs rm -f)

 # Remove symbols/apex/com.android.art symlink (b/171406631)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/apex/com.android.art)

 # art/tools/build_linux_bionic_tests.sh uses find here and can encounter
 # libdexfile_external.so in incremental builds.
 $(call add-clean-step, rm -rf $(HOST_OUT))

 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************
	# Copyright (C) 2014 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# If you don't need to do a full clean build but would like to touch
	# a file or delete some intermediate files, add a clean step to the end
	# of the list. These steps will only be run once, if they haven't been
	# run before.
	#
	# E.g.:
	# $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
	# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
	#
	# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
	# files that are missing or have been moved.
	#
	# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
	# Use $(OUT_DIR) to refer to the "out" directory.
	#
	# If you need to re-do something that's already mentioned, just copy
	# the command and add it to the bottom of the list. E.g., if a change
	# that you made last week required touching a file and a change you
	# made today requires touching the same file, just copy the old
	# touch step and add it to the end of the list.
	#
	# ************************************************
	# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
	# ************************************************

	# For example:
	#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
	#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
	#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 \| xargs -0 rm -f)
	#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)

	# Switching to jemalloc requires deleting these files.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libart_*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libartd_*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libart_*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libartd_*)

	# Old Android Runtime APEX package, before the introduction of "release" and "debug" packages.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.runtime.apex)

	# Clean up ICU libraries moved to runtime apex
	$(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libandroidicu.so)
	$(call add-clean-step, rm -f $(PRODUCT_OUT)/system/lib*/libpac.so)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/art_libdexfile_support_tests/dex_file_supp_test)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)

	# Clean up duplicate compiles between static and shared compiles of libart and libartd
	$(call add-clean-step, rm -rf $(OUT_DIR)/soong/.intermediates/art/runtime/libart/shared/obj)
	$(call add-clean-step, rm -rf $(OUT_DIR)/soong/.intermediates/art/runtime/libartd/shared/obj)

	# Force regeneration of .apex files after removal of time zone data files from the runtime APEX
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.runtime.*)

	# Remove artifacts that used to be generated (as a workaround for
	# improper Runtime APEX support) by tools/buildbot-build.sh via the
	# `standalone-apex-files` Make rule.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*)
	# Remove artifacts that used to be generated (as a workaround for
	# improper Runtime APEX support) by tools/buildbot-build.sh via the
	# `icu-data-art-test` Make rule.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/icu)

	# Remove ART test target artifacts.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/nativetest*/)

	# Remove all APEX artifacts after the change to use the Testing
	# Runtime APEX in lieu of the Debug Runtime APEX for ART testing.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)

	# Remove the icu .dat file from /apex/com.android.runtime and the host equivalent.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)
	$(call add-clean-step, rm -rf $(HOST_OUT)/com.android.runtime/etc/icu/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/icu)

	# Remove all APEX artifacts for the Runtime/ART APEX split.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex)
	$(call add-clean-step, rm -rf $(HOST_OUT)/apex)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/apex)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/apex)

	# Remove dex2oat artifacts for boot image extensions (workaround for broken dependencies).
	$(call add-clean-step, find $(OUT_DIR) -name ".oat" -o -name ".odex" -o -name ".art" -o -name '.vdex' \| xargs rm -f)
	$(call add-clean-step, find $(OUT_DIR) -name ".oat" -o -name ".odex" -o -name ".art" -o -name '.vdex' \| xargs rm -f)
	$(call add-clean-step, find $(OUT_DIR) -name ".oat" -o -name ".odex" -o -name ".art" -o -name '.vdex' \| xargs rm -f)

	# Remove empty dir for art APEX because it will be created on demand while mounting release\|debug
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/apex/com.android.art)

	# Remove 'libart[d]?-simulator-container.so' which was briefly in the ART AREX.
	$(call add-clean-step, find $(OUT_DIR)/soong/.intermediates/art -name 'libart*-simulator-container.so' -type f \| xargs rm -f)

	# Remove symbols/apex/com.android.art symlink (b/171406631)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/apex/com.android.art)

	# art/tools/build_linux_bionic_tests.sh uses find here and can encounter
	# libdexfile_external.so in incremental builds.
	$(call add-clean-step, rm -rf $(HOST_OUT))

	# ************************************************
	# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
	# ************************************************