tools/golem/build-target.sh - LeafOS-Project/android_art - Gitiles

 #!/bin/bash
 #
 # Copyright (C) 2017 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 if [[ ! -d art ]]; then
   echo "Script needs to be run at the root of the android tree"
   exit 1
 fi

 ALL_CONFIGS=(linux-ia32 linux-x64 linux-armv8 linux-armv7 android-armv8 android-armv7)

 usage() {
   local config
   local golem_target

   (cat << EOF
   Usage: $(basename "${BASH_SOURCE[0]}") [--golem=<target>] --machine-type=MACHINE_TYPE
                  [--tarball[=<target>.tar.gz]]

   Build minimal art binaries required to run golem benchmarks either
   locally or on the golem servers.

   Creates the \$MACHINE_TYPE binaries in your \$OUT_DIR, and if --tarball was specified,
   it also tars the results of the build together into your <target.tar.gz> file.
   --------------------------------------------------------
   Required Flags:
     --machine-type=MT   Specify the machine type that will be built.

   Optional Flags":
     --golem=<target>    Builds with identical commands that Golem servers use.
     --tarball[=o.tgz]   Tar/gz the results. File name defaults to <machine_type>.tar.gz
     -j<num>             Specify how many jobs to use for parallelism.
     --help              Print this help listing.
     --showcommands      Show commands as they are being executed.
     --simulate          Print commands only, don't execute commands.
 EOF
   ) | sed -e 's/^[[:space:]][[:space:]]//g' >&2 # Strip leading whitespace from heredoc.

   echo >&2 "Available machine types:"
   for config in "${ALL_CONFIGS[@]}"; do
     echo >&2 "  $config"
   done

   echo >&2
   echo >&2 "Available Golem targets:"
   while IFS='' read -r golem_target; do
     echo >&2 "  $golem_target"
   done < <("$(thisdir)/env" --list-targets)
 }

 # Check if $1 element is in array $2
 contains_element() {
   local e
   for e in "${@:2}"; do [[ "$e" == "$1" ]] && return 0; done
   return 1
 }

 # Display a command, but don't execute it, if --showcommands was set.
 show_command() {
   if [[ $showcommands == "showcommands" ]]; then
     echo "$@"
   fi
 }

 # Execute a command, displaying it if --showcommands was set.
 # If --simulate is used, command is not executed.
 execute() {
   show_command "$@"
   execute_noshow "$@"
 }

 # Execute a command unless --simulate was used.
 execute_noshow() {
   if [[ $simulate == "simulate" ]]; then
     return 0
   fi

   local prog="$1"
   shift
   "$prog" "$@"
 }

 # Export environment variable, echoing it to screen.
 setenv() {
   local name="$1"
   local value="$2"

   export $name="$value"
   echo export $name="$value"
 }

 # Export environment variable, echoing $3 to screen ($3 is meant to be unevaluated).
 setenv_escape() {
   local name="$1"
   local value="$2"
   local escaped_value="$3"

   export $name="$value"
   echo export $name="$escaped_value"
 }

 log_usage_error() {
   echo >&2 "ERROR: " "$@"
   echo >&2 "       See --help for the correct usage information."
   exit 1
 }

 log_fatal() {
   echo >&2 "FATAL: " "$@"
   exit 2
 }

 # Get the directory of this script.
 thisdir() {
   (\cd "$(dirname "${BASH_SOURCE[0]}")" && pwd )
 }

 # Get the path to the top of the Android source tree.
 gettop() {
   if [[ "x$ANDROID_BUILD_TOP" != "x" ]]; then
     echo "$ANDROID_BUILD_TOP";
   else
     echo "$(thisdir)/../../.."
   fi
 }

 # Get a build variable from the Android build system.
 get_build_var() {
   local varname="$1"

   # include the desired target product/build-variant
   # which won't be set in our env if neither we nor the user first executed
   # source build/envsetup.sh (e.g. if simulating from a fresh shell).
   local extras
   [[ -n $target_product ]] && extras+=" TARGET_PRODUCT=$target_product"
   [[ -n $target_build_variant ]] && extras+=" TARGET_BUILD_VARIANT=$target_build_variant"

   # call dumpvar from the build system.
   (\cd "$(gettop)"; env $extras build/soong/soong_ui.bash --dumpvar-mode $varname)
 }

 # Defaults from command-line.

 mode=""  # blank or 'golem' if --golem was specified.
 golem_target="" # --golem=$golem_target
 config="" # --machine-type=$config
 j_arg=""
 showcommands=""
 simulate=""
 make_tarball=""
 tarball=""

 # Parse command line arguments

 while [[ "$1" != "" ]]; do
   case "$1" in
     --help)
       usage
       exit 1
       ;;
     --golem=*)
       mode="golem"
       golem_target="${1##--golem=}"

       if [[ "x$golem_target" == x ]]; then
         log_usage_error "Missing --golem target type."
       fi

       shift
       ;;
     --machine-type=*)
       config="${1##--machine-type=}"
       if ! contains_element "$config" "${ALL_CONFIGS[@]}"; then
         log_usage_error "Invalid --machine-type value '$config'"
       fi
       shift
       ;;
     --tarball)
       tarball="" # reuse the machine type name.
       make_tarball="make_tarball"
       shift
       ;;
     --tarball=*)
       tarball="${1##--tarball=}"
       make_tarball="make_tarball"
       shift
       ;;
     -j*)
       j_arg="$1"
       shift
       ;;
     --showcommands)
       showcommands="showcommands"
       shift
       ;;
     --simulate)
       simulate="simulate"
       shift
       ;;
     *)
       log_usage_error "Unknown options $1"
       ;;
   esac
 done

 ###################################
 ###################################
 ###################################

 if [[ -z $config ]]; then
   log_usage_error "--machine-type option is required."
 fi

 # --tarball defaults to the --machine-type value with .tar.gz.
 tarball="${tarball:-$config.tar.gz}"

 target_product="$TARGET_PRODUCT"
 target_build_variant="$TARGET_BUILD_VARIANT"

 # If not using --golem, use whatever the user had lunch'd prior to this script.
 if [[ $mode == "golem" ]]; then
   # This section is intended solely to be executed by a golem build server.

   target_build_variant=eng
   case "$config" in
     *-armv7)
       target_product="arm_krait"
       ;;
     *-armv8)
       target_product="armv8"
       ;;
     *)
       target_product="sdk"
       ;;
   esac

   if [[ $target_product = arm* ]]; then
     # If using the regular manifest, e.g. 'master'
     # The lunch command for arm will assuredly fail because we don't have device/generic/art.
     #
     # Print a human-readable error message instead of trying to lunch and failing there.
     if ! [[ -d "$(gettop)/device/generic/art" ]]; then
       log_fatal "Missing device/generic/art directory. Perhaps try master-art repo manifest?\n" \
                 "       Cannot build ARM targets (arm_krait, armv8) for Golem." >&2
     fi
     # We could try to keep on simulating but it seems brittle because we won't have the proper
     # build variables to output the right strings.
   fi

   # Get this particular target's environment variables (e.g. ART read barrier on/off).
   source "$(thisdir)"/env "$golem_target" || exit 1

   lunch_target="$target_product-$target_build_variant"

   execute 'source' build/envsetup.sh
   # Build generic targets (as opposed to something specific like aosp_angler-eng).
   execute lunch "$lunch_target"
   # Golem uses master-art repository which is missing a lot of other libraries.
   setenv SOONG_ALLOW_MISSING_DEPENDENCIES true
   # Let the build system know we're not aiming to do a full platform build.
   setenv TARGET_BUILD_UNBUNDLED true
   # Golem may be missing tools such as javac from its path.
   setenv_escape PATH "/usr/lib/jvm/java-8-openjdk-amd64/bin/:$PATH" '/usr/lib/jvm/java-8-openjdk-amd64/bin/:$PATH'
 else
   # Look up the default variables from the build system if they weren't set already.
   [[ -z $target_product ]] && target_product="$(get_build_var TARGET_PRODUCT)"
   [[ -z $target_build_variant ]] && target_build_variant="$(get_build_var TARGET_BUILD_VARIANT)"
 fi

 # Defaults for all machine types.
 make_target="build-art-target-golem"
 out_dir="out/x86_64"
 root_dir_var="PRODUCT_OUT"
 strip_symbols=false
 bit64_suffix=""
 tar_directories=(system data/art-test)

 # Per-machine type overrides
 if [[ $config == linux-arm* ]]; then
     setenv ART_TARGET_LINUX true
 fi

 case "$config" in
   linux-ia32|linux-x64)
     root_dir_var="HOST_OUT"
     # Android strips target builds automatically, but not host builds.
     strip_symbols=true
     make_target="build-art-host-golem"

     if [[ $config == linux-ia32 ]]; then
       out_dir="out/x86"
       setenv HOST_PREFER_32_BIT true
     else
       bit64_suffix="64"
     fi

     tar_directories=(bin framework usr lib${bit64_suffix})
     ;;
   *-armv8)
     bit64_suffix="64"
     ;;
   *-armv7)
     ;;
   *)
     log_fatal "Unsupported machine-type '$config'"
 esac

 # Golem benchmark run commands expect a certain $OUT_DIR to be set,
 # so specify it here.
 #
 # Note: It is questionable if we want to customize this since users
 # could alternatively probably use their own build directly (and forgo this script).
 setenv OUT_DIR "$out_dir"
 root_dir="$(get_build_var "$root_dir_var")"

 if [[ $mode == "golem" ]]; then
   # For golem-style running only.
   # Sets the DT_INTERP to this path in every .so we can run the
   # non-system version of dalvikvm with our own copies of the dependencies (e.g. our own libc++).
   if [[ $config == android-* ]]; then
     # TODO: the linker can be relative to the binaries
     # (which is what we do for linux-armv8 and linux-armv7)
     golem_run_path="/data/local/tmp/runner/"
   else
     golem_run_path=""
   fi

   # Only do this for target builds. Host doesn't need this.
   if [[ $config == *-arm* ]]; then
     setenv CUSTOM_TARGET_LINKER "${golem_run_path}${root_dir}/system/bin/linker${bit64_suffix}"
   fi
 fi

 #
 # Main command execution below here.
 # (everything prior to this just sets up environment variables,
 #  and maybe calls lunch).
 #

 execute build/soong/soong_ui.bash --make-mode "${j_arg}" "${make_target}"

 if $strip_symbols; then
   # Further reduce size by stripping symbols.
   execute_noshow strip $root_dir/bin/* || true
   show_command strip $root_dir/bin/'*'  '|| true'
   execute_noshow strip $root_dir/lib${bit64_suffix}/'*'
   show_command strip $root_dir/lib${bit64_suffix}/'*'
 fi

 if [[ "$make_tarball" == "make_tarball" ]]; then
   # Create a tarball which is required for the golem build resource.
   # (In particular, each golem benchmark's run commands depend on a list of resource files
   #  in order to have all the files it needs to actually execute,
   #  and this tarball would satisfy that particular target+machine-type's requirements).
   dirs_rooted=()
   for tar_dir in "${tar_directories[@]}"; do
     dirs_rooted+=("$root_dir/$tar_dir")
   done

   execute tar -czf "${tarball}" --exclude ".git" --exclude ".gitignore" "${dirs_rooted[@]}"
   tar_result=$?
   if [[ $tar_result -ne 0 ]]; then
     [[ -f $tarball ]] && rm $tarball
   fi

   show_command '[[ $? -ne 0 ]] && rm' "$tarball"
 fi
	#!/bin/bash
	#
	# Copyright (C) 2017 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	if [[ ! -d art ]]; then
	echo "Script needs to be run at the root of the android tree"
	exit 1
	fi

	ALL_CONFIGS=(linux-ia32 linux-x64 linux-armv8 linux-armv7 android-armv8 android-armv7)

	usage() {
	local config
	local golem_target

	(cat << EOF
	Usage: $(basename "${BASH_SOURCE[0]}") [--golem=<target>] --machine-type=MACHINE_TYPE
	[--tarball[=<target>.tar.gz]]

	Build minimal art binaries required to run golem benchmarks either
	locally or on the golem servers.

	Creates the \$MACHINE_TYPE binaries in your \$OUT_DIR, and if --tarball was specified,
	it also tars the results of the build together into your <target.tar.gz> file.
	--------------------------------------------------------
	Required Flags:
	--machine-type=MT Specify the machine type that will be built.

	Optional Flags":
	--golem=<target> Builds with identical commands that Golem servers use.
	--tarball[=o.tgz] Tar/gz the results. File name defaults to <machine_type>.tar.gz
	-j<num> Specify how many jobs to use for parallelism.
	--help Print this help listing.
	--showcommands Show commands as they are being executed.
	--simulate Print commands only, don't execute commands.
	EOF
	) \| sed -e 's/^[[:space:]][[:space:]]//g' >&2 # Strip leading whitespace from heredoc.

	echo >&2 "Available machine types:"
	for config in "${ALL_CONFIGS[@]}"; do
	echo >&2 " $config"
	done

	echo >&2
	echo >&2 "Available Golem targets:"
	while IFS='' read -r golem_target; do
	echo >&2 " $golem_target"
	done < <("$(thisdir)/env" --list-targets)
	}

	# Check if $1 element is in array $2
	contains_element() {
	local e
	for e in "${@:2}"; do [[ "$e" == "$1" ]] && return 0; done
	return 1
	}

	# Display a command, but don't execute it, if --showcommands was set.
	show_command() {
	if [[ $showcommands == "showcommands" ]]; then
	echo "$@"
	fi
	}

	# Execute a command, displaying it if --showcommands was set.
	# If --simulate is used, command is not executed.
	execute() {
	show_command "$@"
	execute_noshow "$@"
	}

	# Execute a command unless --simulate was used.
	execute_noshow() {
	if [[ $simulate == "simulate" ]]; then
	return 0
	fi

	local prog="$1"
	shift
	"$prog" "$@"
	}

	# Export environment variable, echoing it to screen.
	setenv() {
	local name="$1"
	local value="$2"

	export $name="$value"
	echo export $name="$value"
	}

	# Export environment variable, echoing $3 to screen ($3 is meant to be unevaluated).
	setenv_escape() {
	local name="$1"
	local value="$2"
	local escaped_value="$3"

	export $name="$value"
	echo export $name="$escaped_value"
	}

	log_usage_error() {
	echo >&2 "ERROR: " "$@"
	echo >&2 " See --help for the correct usage information."
	exit 1
	}

	log_fatal() {
	echo >&2 "FATAL: " "$@"
	exit 2
	}

	# Get the directory of this script.
	thisdir() {
	(\cd "$(dirname "${BASH_SOURCE[0]}")" && pwd )
	}

	# Get the path to the top of the Android source tree.
	gettop() {
	if [[ "x$ANDROID_BUILD_TOP" != "x" ]]; then
	echo "$ANDROID_BUILD_TOP";
	else
	echo "$(thisdir)/../../.."
	fi
	}

	# Get a build variable from the Android build system.
	get_build_var() {
	local varname="$1"

	# include the desired target product/build-variant
	# which won't be set in our env if neither we nor the user first executed
	# source build/envsetup.sh (e.g. if simulating from a fresh shell).
	local extras
	[[ -n $target_product ]] && extras+=" TARGET_PRODUCT=$target_product"
	[[ -n $target_build_variant ]] && extras+=" TARGET_BUILD_VARIANT=$target_build_variant"

	# call dumpvar from the build system.
	(\cd "$(gettop)"; env $extras build/soong/soong_ui.bash --dumpvar-mode $varname)
	}

	# Defaults from command-line.

	mode="" # blank or 'golem' if --golem was specified.
	golem_target="" # --golem=$golem_target
	config="" # --machine-type=$config
	j_arg=""
	showcommands=""
	simulate=""
	make_tarball=""
	tarball=""

	# Parse command line arguments

	while [[ "$1" != "" ]]; do
	case "$1" in
	--help)
	usage
	exit 1
	;;
	--golem=*)
	mode="golem"
	golem_target="${1##--golem=}"

	if [[ "x$golem_target" == x ]]; then
	log_usage_error "Missing --golem target type."
	fi

	shift
	;;
	--machine-type=*)
	config="${1##--machine-type=}"
	if ! contains_element "$config" "${ALL_CONFIGS[@]}"; then
	log_usage_error "Invalid --machine-type value '$config'"
	fi
	shift
	;;
	--tarball)
	tarball="" # reuse the machine type name.
	make_tarball="make_tarball"
	shift
	;;
	--tarball=*)
	tarball="${1##--tarball=}"
	make_tarball="make_tarball"
	shift
	;;
	-j*)
	j_arg="$1"
	shift
	;;
	--showcommands)
	showcommands="showcommands"
	shift
	;;
	--simulate)
	simulate="simulate"
	shift
	;;
	*)
	log_usage_error "Unknown options $1"
	;;
	esac
	done

	###################################
	###################################
	###################################

	if [[ -z $config ]]; then
	log_usage_error "--machine-type option is required."
	fi

	# --tarball defaults to the --machine-type value with .tar.gz.
	tarball="${tarball:-$config.tar.gz}"

	target_product="$TARGET_PRODUCT"
	target_build_variant="$TARGET_BUILD_VARIANT"

	# If not using --golem, use whatever the user had lunch'd prior to this script.
	if [[ $mode == "golem" ]]; then
	# This section is intended solely to be executed by a golem build server.

	target_build_variant=eng
	case "$config" in
	*-armv7)
	target_product="arm_krait"
	;;
	*-armv8)
	target_product="armv8"
	;;
	*)
	target_product="sdk"
	;;
	esac

	if [[ $target_product = arm* ]]; then
	# If using the regular manifest, e.g. 'master'
	# The lunch command for arm will assuredly fail because we don't have device/generic/art.
	#
	# Print a human-readable error message instead of trying to lunch and failing there.
	if ! [[ -d "$(gettop)/device/generic/art" ]]; then
	log_fatal "Missing device/generic/art directory. Perhaps try master-art repo manifest?\n" \
	" Cannot build ARM targets (arm_krait, armv8) for Golem." >&2
	fi
	# We could try to keep on simulating but it seems brittle because we won't have the proper
	# build variables to output the right strings.
	fi

	# Get this particular target's environment variables (e.g. ART read barrier on/off).
	source "$(thisdir)"/env "$golem_target" \|\| exit 1

	lunch_target="$target_product-$target_build_variant"

	execute 'source' build/envsetup.sh
	# Build generic targets (as opposed to something specific like aosp_angler-eng).
	execute lunch "$lunch_target"
	# Golem uses master-art repository which is missing a lot of other libraries.
	setenv SOONG_ALLOW_MISSING_DEPENDENCIES true
	# Let the build system know we're not aiming to do a full platform build.
	setenv TARGET_BUILD_UNBUNDLED true
	# Golem may be missing tools such as javac from its path.
	setenv_escape PATH "/usr/lib/jvm/java-8-openjdk-amd64/bin/:$PATH" '/usr/lib/jvm/java-8-openjdk-amd64/bin/:$PATH'
	else
	# Look up the default variables from the build system if they weren't set already.
	[[ -z $target_product ]] && target_product="$(get_build_var TARGET_PRODUCT)"
	[[ -z $target_build_variant ]] && target_build_variant="$(get_build_var TARGET_BUILD_VARIANT)"
	fi

	# Defaults for all machine types.
	make_target="build-art-target-golem"
	out_dir="out/x86_64"
	root_dir_var="PRODUCT_OUT"
	strip_symbols=false
	bit64_suffix=""
	tar_directories=(system data/art-test)

	# Per-machine type overrides
	if [[ $config == linux-arm* ]]; then
	setenv ART_TARGET_LINUX true
	fi

	case "$config" in
	linux-ia32\|linux-x64)
	root_dir_var="HOST_OUT"
	# Android strips target builds automatically, but not host builds.
	strip_symbols=true
	make_target="build-art-host-golem"

	if [[ $config == linux-ia32 ]]; then
	out_dir="out/x86"
	setenv HOST_PREFER_32_BIT true
	else
	bit64_suffix="64"
	fi

	tar_directories=(bin framework usr lib${bit64_suffix})
	;;
	*-armv8)
	bit64_suffix="64"
	;;
	*-armv7)
	;;
	*)
	log_fatal "Unsupported machine-type '$config'"
	esac

	# Golem benchmark run commands expect a certain $OUT_DIR to be set,
	# so specify it here.
	#
	# Note: It is questionable if we want to customize this since users
	# could alternatively probably use their own build directly (and forgo this script).
	setenv OUT_DIR "$out_dir"
	root_dir="$(get_build_var "$root_dir_var")"

	if [[ $mode == "golem" ]]; then
	# For golem-style running only.
	# Sets the DT_INTERP to this path in every .so we can run the
	# non-system version of dalvikvm with our own copies of the dependencies (e.g. our own libc++).
	if [[ $config == android-* ]]; then
	# TODO: the linker can be relative to the binaries
	# (which is what we do for linux-armv8 and linux-armv7)
	golem_run_path="/data/local/tmp/runner/"
	else
	golem_run_path=""
	fi

	# Only do this for target builds. Host doesn't need this.
	if [[ $config == -arm ]]; then
	setenv CUSTOM_TARGET_LINKER "${golem_run_path}${root_dir}/system/bin/linker${bit64_suffix}"
	fi
	fi

	#
	# Main command execution below here.
	# (everything prior to this just sets up environment variables,
	# and maybe calls lunch).
	#

	execute build/soong/soong_ui.bash --make-mode "${j_arg}" "${make_target}"

	if $strip_symbols; then
	# Further reduce size by stripping symbols.
	execute_noshow strip $root_dir/bin/* \|\| true
	show_command strip $root_dir/bin/'*' '\|\| true'
	execute_noshow strip $root_dir/lib${bit64_suffix}/'*'
	show_command strip $root_dir/lib${bit64_suffix}/'*'
	fi

	if [[ "$make_tarball" == "make_tarball" ]]; then
	# Create a tarball which is required for the golem build resource.
	# (In particular, each golem benchmark's run commands depend on a list of resource files
	# in order to have all the files it needs to actually execute,
	# and this tarball would satisfy that particular target+machine-type's requirements).
	dirs_rooted=()
	for tar_dir in "${tar_directories[@]}"; do
	dirs_rooted+=("$root_dir/$tar_dir")
	done

	execute tar -czf "${tarball}" --exclude ".git" --exclude ".gitignore" "${dirs_rooted[@]}"
	tar_result=$?
	if [[ $tar_result -ne 0 ]]; then
	[[ -f $tarball ]] && rm $tarball
	fi

	show_command '[[ $? -ne 0 ]] && rm' "$tarball"
	fi