netxen: add defs for new chip/boards
Add macros for new chip revision and board configurations.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index fa1fbab..acc7d79 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -111,6 +111,13 @@
#define NX_P2_C0 0x24
#define NX_P2_C1 0x25
+#define NX_P3_A0 0x30
+#define NX_P3_A2 0x30
+#define NX_P3_B0 0x40
+#define NX_P3_B1 0x41
+
+#define NX_IS_REVISION_P2(REVISION) (REVISION <= NX_P2_C1)
+#define NX_IS_REVISION_P3(REVISION) (REVISION >= NX_P3_A0)
#define FIRST_PAGE_GROUP_START 0
#define FIRST_PAGE_GROUP_END 0x100000
@@ -125,6 +132,15 @@
#define SECOND_PAGE_GROUP_SIZE SECOND_PAGE_GROUP_END - SECOND_PAGE_GROUP_START
#define THIRD_PAGE_GROUP_SIZE THIRD_PAGE_GROUP_END - THIRD_PAGE_GROUP_START
+#define P2_MAX_MTU (8000)
+#define P3_MAX_MTU (9600)
+#define NX_ETHERMTU 1500
+#define NX_MAX_ETHERHDR 32 /* This contains some padding */
+
+#define NX_RX_NORMAL_BUF_MAX_LEN (NX_MAX_ETHERHDR + NX_ETHERMTU)
+#define NX_P2_RX_JUMBO_BUF_MAX_LEN (NX_MAX_ETHERHDR + P2_MAX_MTU)
+#define NX_P3_RX_JUMBO_BUF_MAX_LEN (NX_MAX_ETHERHDR + P3_MAX_MTU)
+
#define MAX_RX_BUFFER_LENGTH 1760
#define MAX_RX_JUMBO_BUFFER_LENGTH 8062
#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512)
@@ -139,16 +155,16 @@
#define MAX_RING_CTX 1
/* Opcodes to be used with the commands */
-enum {
- TX_ETHER_PKT = 0x01,
-/* The following opcodes are for IP checksum */
- TX_TCP_PKT,
- TX_UDP_PKT,
- TX_IP_PKT,
- TX_TCP_LSO,
- TX_IPSEC,
- TX_IPSEC_CMD
-};
+#define TX_ETHER_PKT 0x01
+#define TX_TCP_PKT 0x02
+#define TX_UDP_PKT 0x03
+#define TX_IP_PKT 0x04
+#define TX_TCP_LSO 0x05
+#define TX_TCP_LSO6 0x06
+#define TX_IPSEC 0x07
+#define TX_IPSEC_CMD 0x0a
+#define TX_TCPV6_PKT 0x0b
+#define TX_UDPV6_PKT 0x0c
/* The following opcodes are for internal consumption. */
#define NETXEN_CONTROL_OP 0x10
@@ -190,6 +206,7 @@
#define MAX_RCV_DESCRIPTORS 16384
#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4)
#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4)
+#define MAX_RCV_DESCRIPTORS_10G 8192
#define MAX_JUMBO_RCV_DESCRIPTORS 1024
#define MAX_LRO_RCV_DESCRIPTORS 64
#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS
@@ -461,7 +478,20 @@
NETXEN_BRDTYPE_P2_SB31_10G_IMEZ = 0x000d,
NETXEN_BRDTYPE_P2_SB31_10G_HMEZ = 0x000e,
- NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f
+ NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f,
+
+ NETXEN_BRDTYPE_P3_REF_QG = 0x0021,
+ NETXEN_BRDTYPE_P3_HMEZ = 0x0022,
+ NETXEN_BRDTYPE_P3_10G_CX4_LP = 0x0023,
+ NETXEN_BRDTYPE_P3_4_GB = 0x0024,
+ NETXEN_BRDTYPE_P3_IMEZ = 0x0025,
+ NETXEN_BRDTYPE_P3_10G_SFP_PLUS = 0x0026,
+ NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
+ NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
+ NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
+ NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
+ NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+
} netxen_brdtype_t;
typedef enum {
@@ -1049,7 +1079,7 @@
* NetXen Board information
*/
-#define NETXEN_MAX_SHORT_NAME 16
+#define NETXEN_MAX_SHORT_NAME 32
struct netxen_brdinfo {
netxen_brdtype_t brdtype; /* type of board */
long ports; /* max no of physical ports */
@@ -1063,6 +1093,17 @@
{NETXEN_BRDTYPE_P2_SB31_10G, 1, "XGb XFP"},
{NETXEN_BRDTYPE_P2_SB35_4G, 4, "Quad Gb"},
{NETXEN_BRDTYPE_P2_SB31_2G, 2, "Dual Gb"},
+ {NETXEN_BRDTYPE_P3_REF_QG, 4, "Reference Quad Gig "},
+ {NETXEN_BRDTYPE_P3_HMEZ, 2, "Dual XGb HMEZ"},
+ {NETXEN_BRDTYPE_P3_10G_CX4_LP, 2, "Dual XGb CX4 LP"},
+ {NETXEN_BRDTYPE_P3_4_GB, 4, "Quad Gig LP"},
+ {NETXEN_BRDTYPE_P3_IMEZ, 2, "Dual XGb IMEZ"},
+ {NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"},
+ {NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"},
+ {NETXEN_BRDTYPE_P3_XG_LOM, 2, "Dual XGb LOM"},
+ {NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"},
+ {NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"},
+ {NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"}
};
#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)