| /* |
| * s2mu004_charger.c - S2MU004 Charger Driver |
| * |
| * Copyright (C) 2016 Samsung Electronics Co.Ltd |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/mfd/samsung/s2mu004.h> |
| #include "include/charger/s2mu004_charger.h" |
| #include <linux/version.h> |
| #include <linux/sec_batt.h> |
| |
| #define ENABLE_MIVR 0 |
| |
| #define EN_OVP_IRQ 1 |
| #define EN_IEOC_IRQ 1 |
| #define EN_TOPOFF_IRQ 1 |
| #define EN_RECHG_REQ_IRQ 0 |
| #define EN_TR_IRQ 0 |
| #define EN_MIVR_SW_REGULATION 0 |
| #define EN_BST_IRQ 0 |
| #define EN_BAT_DET_IRQ 0 |
| #if defined(CONFIG_CHARGER_S2MU004_IVR_IRQ) |
| #define EN_IVR_IRQ 1 |
| #else |
| #define EN_IVR_IRQ 0 |
| #endif |
| #define MINVAL(a, b) ((a <= b) ? a : b) |
| #define EOC_DEBOUNCE_CNT 2 |
| #define HEALTH_DEBOUNCE_CNT 1 |
| #define DEFAULT_CHARGING_CURRENT 500 |
| |
| #define EOC_SLEEP 200 |
| #define EOC_TIMEOUT (EOC_SLEEP * 6) |
| #ifndef EN_TEST_READ |
| #define EN_TEST_READ 1 |
| #endif |
| |
| #define ENABLE 1 |
| #define DISABLE 0 |
| |
| #define IVR_WORK_DELAY 50 |
| |
| static struct device_attribute s2mu004_charger_attrs[] = { |
| S2MU004_CHARGER_ATTR(chip_id), |
| }; |
| |
| static char *s2mu004_supplied_to[] = { |
| "s2mu004-charger", |
| }; |
| |
| static enum power_supply_property s2mu004_charger_props[] = { |
| }; |
| |
| static enum power_supply_property s2mu004_otg_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static int s2mu004_get_charging_health(struct s2mu004_charger_data *charger); |
| static int s2mu004_get_input_current_limit(struct s2mu004_charger_data *charger); |
| #if EN_IVR_IRQ |
| static void s2mu004_enable_ivr_irq(struct s2mu004_charger_data *charger); |
| #endif |
| |
| static void s2mu004_test_read(struct i2c_client *i2c) |
| { |
| static int reg_list[] = { |
| 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, |
| 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, |
| 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x33, 0x03, 0x71, |
| 0x74, 0x91, 0x96, 0xA5 |
| }; |
| u8 data; |
| char str[1016] = {0,}; |
| int i = 0, reg_list_size = 0; |
| |
| reg_list_size = ARRAY_SIZE(reg_list); |
| for (i = 0; i < reg_list_size; i++) { |
| s2mu004_read_reg(i2c, reg_list[i], &data); |
| sprintf(str+strlen(str), "0x%02x:0x%02x, ", reg_list[i], data); |
| } |
| |
| pr_info("[DEBUG][CHG]%s: %s\n", __func__, str); |
| } |
| |
| static int s2mu004_charger_otg_control( |
| struct s2mu004_charger_data *charger, bool enable) |
| { |
| u8 chg_sts2, chg_ctrl0, temp; |
| |
| pr_info("%s: called charger otg control : %s\n", __func__, |
| enable ? "ON" : "OFF"); |
| |
| if (charger->otg_on == enable || lpcharge) |
| return 0; |
| |
| mutex_lock(&charger->charger_mutex); |
| if (!enable) { |
| if (charger->is_charging) { |
| pr_info("%s: Charger is enabled and OTG Disable received. Disable OTG\n", __func__); |
| pr_info("%s: is_charging: %d, otg_on: %d", |
| __func__, charger->is_charging, charger->otg_on); |
| } |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_CHG_CTRL0, CHG_MODE, REG_MODE_MASK); |
| s2mu004_update_reg(charger->i2c, 0xAE, 0x80, 0xF0); |
| } else { |
| #if 0 |
| if (charger->is_charging) { |
| pr_info("%s: Charger is enabled and OTG Enabled received. Skip OTG Enable\n", __func__); |
| pr_info("%s: is_charging: %d, otg_on: %d", |
| __func__, charger->is_charging, charger->otg_on); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS2, &chg_sts2); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL0, &chg_ctrl0); |
| pr_info("%s S2MU004_CHG_STATUS2: 0x%x\n", __func__, chg_sts2); |
| pr_info("%s S2MU004_CHG_CTRL0: 0x%x\n", __func__, chg_ctrl0); |
| mutex_unlock(&charger->charger_mutex); |
| return 0; |
| } |
| #endif |
| |
| #ifndef CONFIG_SEC_FACTORY |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL7, 0x0 << SET_VF_VBYP_SHIFT, SET_VF_VBYP_MASK); |
| #endif |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_CHG_CTRL4, |
| S2MU004_SET_OTG_OCP_1500mA << SET_OTG_OCP_SHIFT, |
| SET_OTG_OCP_MASK); |
| msleep(30); |
| s2mu004_update_reg(charger->i2c, 0xAE, 0x00, 0xF0); |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_CHG_CTRL0, OTG_BST_MODE, REG_MODE_MASK); |
| charger->cable_type = SEC_BATTERY_CABLE_OTG; |
| #ifndef CONFIG_SEC_FACTORY |
| cancel_delayed_work(&charger->otg_vbus_work); |
| schedule_delayed_work(&charger->otg_vbus_work, msecs_to_jiffies(1500)); |
| #endif |
| } |
| charger->otg_on = enable; |
| mutex_unlock(&charger->charger_mutex); |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS2, &chg_sts2); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL0, &chg_ctrl0); |
| s2mu004_read_reg(charger->i2c, 0xAE, &temp); |
| pr_info("%s S2MU004_CHG_STATUS2: 0x%x\n", __func__, chg_sts2); |
| pr_info("%s S2MU004_CHG_CTRL0: 0x%x\n", __func__, chg_ctrl0); |
| pr_info("%s 0xAE: 0x%x\n", __func__, temp); |
| |
| power_supply_changed(charger->psy_otg); |
| return enable; |
| } |
| |
| #if EN_IVR_IRQ |
| static void reduce_input_current(struct s2mu004_charger_data *charger) |
| { |
| int old_input_current, new_input_current; |
| int data; |
| |
| old_input_current = s2mu004_get_input_current_limit(charger); |
| new_input_current = (old_input_current > MINIMUM_INPUT_CURRENT + REDUCE_CURRENT_STEP) ? |
| (old_input_current - REDUCE_CURRENT_STEP) : MINIMUM_INPUT_CURRENT; |
| |
| if (old_input_current <= new_input_current) { |
| pr_info("%s: Same or less new input current:(%d, %d, %d)\n", __func__, |
| old_input_current, new_input_current, charger->input_current); |
| } else { |
| pr_info("%s: input currents:(%d, %d, %d)\n", __func__, |
| old_input_current, new_input_current, charger->input_current); |
| |
| data = (new_input_current - 50) / 25; |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL2, |
| data << INPUT_CURRENT_LIMIT_SHIFT, |
| INPUT_CURRENT_LIMIT_MASK); |
| |
| charger->input_current = s2mu004_get_input_current_limit(charger); |
| } |
| charger->ivr_on = true; |
| } |
| #endif |
| |
| #if !defined(CONFIG_SEC_FACTORY) |
| static void s2mu004_analog_ivr_switch( |
| struct s2mu004_charger_data *charger, int enable) |
| { |
| u8 reg_data = 0; |
| int cable_type = SEC_BATTERY_CABLE_NONE; |
| #if defined(CONFIG_BATTERY_SWELLING) |
| int swelling_mode = 0; |
| #endif |
| union power_supply_propval value; |
| |
| if (charger->dev_id >= 0x3) { |
| /* control IVRl only under PMIC REV < 0x3 */ |
| return; |
| } |
| |
| if (factory_mode) { |
| pr_info("%s: Factory Mode Skip Analog IVR Control\n", __func__); |
| return; |
| } |
| |
| #if defined(CONFIG_BATTERY_SWELLING) |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, value); |
| swelling_mode = value.intval; |
| #endif |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| cable_type = value.intval; |
| |
| if (charger->charge_mode == SEC_BAT_CHG_MODE_CHARGING_OFF || |
| charger->charge_mode == SEC_BAT_CHG_MODE_BUCK_OFF || |
| #if defined(CONFIG_BATTERY_SWELLING) |
| swelling_mode || |
| #endif |
| (is_hv_wire_type(cable_type)) || |
| (cable_type == SEC_BATTERY_CABLE_PDIC) || |
| (cable_type == SEC_BATTERY_CABLE_PREPARE_TA)) { |
| pr_info("[DEBUG]%s(%d): digital IVR\n", __func__, __LINE__); |
| enable = 0; |
| } |
| |
| s2mu004_read_reg(charger->i2c, 0xB3, ®_data); |
| pr_info("%s : 0xB3 : 0x%x\n", __func__, reg_data); |
| |
| if (enable) { |
| if (!(reg_data & 0x08)) { |
| /* Enable Analog IVR */ |
| pr_info("[DEBUG]%s: Enable Analog IVR\n", __func__); |
| s2mu004_update_reg(charger->i2c, 0xB3, 0x1 << 3, 0x1 << 3); |
| } |
| } else { |
| if (reg_data & 0x08) { |
| /* Disable Analog IVR - Digital IVR enable*/ |
| pr_info("[DEBUG]%s: Disable Analog IVR - Digital IVR enable\n", |
| __func__); |
| s2mu004_update_reg(charger->i2c, 0xB3, 0x0, 0x1 << 3); |
| } |
| } |
| } |
| #endif |
| |
| static void s2mu004_enable_charger_switch( |
| struct s2mu004_charger_data *charger, int onoff) |
| { |
| if (factory_mode) { |
| pr_info("%s: Factory Mode Skip CHG_EN Control\n", __func__); |
| return; |
| } |
| |
| if (charger->otg_on) { |
| pr_info("[DEBUG] %s: skipped set(%d) : OTG is on\n", __func__, onoff); |
| return; |
| } |
| |
| if (onoff > 0) { |
| pr_info("[DEBUG]%s: turn on charger\n", __func__); |
| #if !defined(CONFIG_SEC_FACTORY) |
| if (charger->dev_id < 0x3) { |
| int cable_type = SEC_BATTERY_CABLE_NONE; |
| #if defined(CONFIG_BATTERY_SWELLING) |
| int swelling_mode = 0; |
| #endif |
| union power_supply_propval value; |
| |
| #if defined(CONFIG_BATTERY_SWELLING) |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, value); |
| swelling_mode = value.intval; |
| #endif |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| cable_type = value.intval; |
| |
| if ((is_hv_wire_type(cable_type)) || |
| (cable_type == SEC_BATTERY_CABLE_PREPARE_TA) || |
| #if defined(CONFIG_BATTERY_SWELLING) |
| swelling_mode || |
| #endif |
| (cable_type == SEC_BATTERY_CABLE_PDIC) || |
| (cable_type == SEC_BATTERY_CABLE_UARTOFF)) { |
| /* Digital IVR */ |
| s2mu004_analog_ivr_switch(charger, DISABLE); |
| } |
| } |
| #endif |
| /* forced ASYNC */ |
| s2mu004_update_reg(charger->i2c, 0x30, 0x03, 0x03); |
| |
| msleep(30); |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL0, CHG_MODE, REG_MODE_MASK); |
| |
| /* timer fault set 16hr(max) */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL16, |
| S2MU004_FC_CHG_TIMER_16hr << SET_TIME_CHG_SHIFT, |
| SET_TIME_CHG_MASK); |
| |
| msleep(100); |
| |
| /* Auto SYNC to ASYNC - default */ |
| s2mu004_update_reg(charger->i2c, 0x30, 0x01, 0x03); |
| |
| /* async off */ |
| s2mu004_update_reg(charger->i2c, 0x96, 0x00, 0x01 << 3); |
| } else { |
| pr_info("[DEBUG] %s: turn off charger\n", __func__); |
| |
| #if !defined(CONFIG_SEC_FACTORY) |
| if (charger->dev_id < 0x3) { |
| /* Disable Analog IVR - Digital IVR enable*/ |
| s2mu004_analog_ivr_switch(charger, DISABLE); |
| } |
| #endif |
| msleep(30); |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL0, BUCK_MODE, REG_MODE_MASK); |
| |
| /* async on */ |
| s2mu004_update_reg(charger->i2c, 0x96, 0x01 << 3, 0x01 << 3); |
| msleep(100); |
| } |
| } |
| |
| static void s2mu004_set_buck(struct s2mu004_charger_data *charger, int enable) |
| { |
| |
| if (enable) { |
| pr_info("[DEBUG]%s: set buck on\n", __func__); |
| s2mu004_enable_charger_switch(charger, charger->is_charging); |
| } else { |
| pr_info("[DEBUG]%s: set buck off (charger off mode)\n", __func__); |
| |
| #if !defined(CONFIG_SEC_FACTORY) |
| if (charger->dev_id < 0x3) { |
| /* Disable Analog IVR - Digital IVR enable*/ |
| s2mu004_analog_ivr_switch(charger, DISABLE); |
| } |
| #endif |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL0, CHARGER_OFF_MODE, REG_MODE_MASK); |
| |
| /* async on */ |
| s2mu004_update_reg(charger->i2c, 0x96, 0x01 << 3, 0x01 << 3); |
| msleep(100); |
| } |
| } |
| |
| static void s2mu004_set_regulation_vsys( |
| struct s2mu004_charger_data *charger, int vsys) |
| { |
| u8 data; |
| |
| pr_info("[DEBUG]%s: VSYS regulation %d\n", __func__, vsys); |
| if (vsys <= 3800) |
| data = 0; |
| else if (vsys > 3800 && vsys <= 4400) |
| data = (vsys - 3800) / 100; |
| else |
| data = 0x06; |
| |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_CHG_CTRL7, data << SET_VSYS_SHIFT, SET_VSYS_MASK); |
| } |
| |
| static void s2mu004_set_regulation_voltage( |
| struct s2mu004_charger_data *charger, int float_voltage) |
| { |
| u8 data; |
| |
| if (factory_mode) |
| return; |
| |
| pr_info("[DEBUG]%s: float_voltage %d\n", __func__, float_voltage); |
| if (float_voltage <= 3900) |
| data = 0; |
| else if (float_voltage > 3900 && float_voltage <= 4530) |
| data = (float_voltage - 3900) / 10; |
| else |
| data = 0x3f; |
| |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_CHG_CTRL6, data << SET_VF_VBAT_SHIFT, SET_VF_VBAT_MASK); |
| } |
| |
| static int s2mu004_get_regulation_voltage(struct s2mu004_charger_data *charger) |
| { |
| u8 reg_data = 0; |
| int float_voltage; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL6, ®_data); |
| reg_data &= 0x3F; |
| float_voltage = reg_data * 10 + 3900; |
| pr_debug("%s: battery cv reg : 0x%x, float voltage val : %d\n", |
| __func__, reg_data, float_voltage); |
| |
| return float_voltage; |
| } |
| |
| static void s2mu004_set_input_current_limit( |
| struct s2mu004_charger_data *charger, int charging_current) |
| { |
| u8 data; |
| |
| if (factory_mode) |
| return; |
| |
| mutex_lock(&charger->charger_mutex); |
| if (is_wireless_type(charger->cable_type)) { |
| pr_info("[DEBUG]%s: Wireless current limit %d\n", |
| __func__, charging_current); |
| if (charging_current <= 50) |
| data = 0x02; |
| else if (charging_current > 50 && charging_current <= 1025) { |
| /* Need to re-write dts file if we need to use 5 digit current (eg. 1.0125A) */ |
| charging_current = charging_current * 10; |
| data = (charging_current - 250) / 125; |
| } else { |
| pr_err("%s: Invalid WC current limit in register, set setting to maximum\n", |
| __func__); |
| data = 0x62; |
| } |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL3, |
| data << INPUT_CURRENT_LIMIT_SHIFT, INPUT_CURRENT_LIMIT_MASK); |
| } else { |
| if (charging_current <= 100) |
| data = 0x02; |
| else if (charging_current > 100 && charging_current <= 2500) |
| data = (charging_current - 50) / 25; |
| else { |
| pr_err("%s: Invalid current limit in register, set setting to maximum\n", |
| __func__); |
| data = 0x62; |
| } |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL2, |
| data << INPUT_CURRENT_LIMIT_SHIFT, INPUT_CURRENT_LIMIT_MASK); |
| } |
| mutex_unlock(&charger->charger_mutex); |
| |
| pr_info("[DEBUG]%s: current %d, 0x%x\n", __func__, charging_current, data); |
| |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| } |
| |
| static int s2mu004_get_input_current_limit(struct s2mu004_charger_data *charger) |
| { |
| u8 data; |
| int w_current; |
| |
| if (is_wireless_type(charger->cable_type)) { |
| data = s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL3, &data); |
| if (data < 0) |
| return data; |
| |
| data = data & INPUT_CURRENT_LIMIT_MASK; |
| |
| if (data > 0x62) { |
| pr_err("%s: Invalid WC current limit in register: 0x%x\n", |
| __func__, data); |
| data = 0x62; |
| } |
| |
| /* note: if use value with 5 digits the fractional 0.5 will be truncated */ |
| w_current = (data * 125 + 250) / 10; |
| |
| pr_debug("[DEBUG]%s: Wireless current limit out: %d\n", |
| __func__, w_current); |
| |
| return w_current; |
| } else { |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL2, &data); |
| if (data < 0) |
| return data; |
| |
| data = data & INPUT_CURRENT_LIMIT_MASK; |
| |
| if (data > 0x62) { |
| pr_err("%s: Invalid current limit in register: 0x%x\n", |
| __func__, data); |
| data = 0x62; |
| } |
| return data * 25 + 50; |
| } |
| } |
| |
| static void s2mu004_set_fast_charging_current( |
| struct s2mu004_charger_data *charger, int charging_current) |
| { |
| u8 data; |
| |
| if (factory_mode) |
| return; |
| |
| if (charging_current <= 100) |
| data = 0x03; |
| else if (charging_current > 100 && charging_current <= 3150) |
| data = (charging_current / 25) - 1; |
| else |
| data = 0x7D; |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL9, |
| data << FAST_CHARGING_CURRENT_SHIFT, FAST_CHARGING_CURRENT_MASK); |
| |
| pr_info("[DEBUG]%s: current %d, 0x%02x\n", __func__, charging_current, data); |
| |
| if (data > 0x11) |
| data = 0x11; /* 0x11 : 450mA */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL8, |
| data << COOL_CHARGING_CURRENT_SHIFT, COOL_CHARGING_CURRENT_MASK); |
| |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| } |
| |
| static int s2mu004_get_fast_charging_current( |
| struct s2mu004_charger_data *charger) |
| { |
| u8 data; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL9, &data); |
| if (data < 0) |
| return data; |
| |
| data = data & FAST_CHARGING_CURRENT_MASK; |
| |
| if (data > 0x7D) { |
| pr_err("%s: Invalid fast charging current in register\n", __func__); |
| data = 0x7D; |
| } |
| return (data + 1) * 25; |
| } |
| |
| static void s2mu004_set_topoff_current( |
| struct s2mu004_charger_data *charger, |
| int eoc_1st_2nd, int current_limit) |
| { |
| int data; |
| union power_supply_propval value; |
| struct power_supply *psy; |
| |
| pr_info("[DEBUG]%s: current %d\n", __func__, current_limit); |
| |
| if (current_limit <= 100) |
| data = 0; |
| else if (current_limit > 100 && current_limit <= 475) |
| data = (current_limit - 100) / 25; |
| else |
| data = 0x0F; |
| |
| switch (eoc_1st_2nd) { |
| case 1: |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL11, |
| data << FIRST_TOPOFF_CURRENT_SHIFT, FIRST_TOPOFF_CURRENT_MASK); |
| psy = power_supply_get_by_name(charger->pdata->fuelgauge_name); |
| if (!psy) |
| pr_err("%s, fail to set topoff current to FG\n", __func__); |
| else { |
| value.intval = current_limit; |
| power_supply_set_property(psy, POWER_SUPPLY_PROP_CURRENT_FULL, &value); |
| } |
| break; |
| case 2: |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL11, |
| data << SECOND_TOPOFF_CURRENT_SHIFT, SECOND_TOPOFF_CURRENT_MASK); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int s2mu004_get_topoff_setting( |
| struct s2mu004_charger_data *charger) |
| { |
| u8 data; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL11, &data); |
| if (data < 0) |
| return data; |
| |
| data = data & FIRST_TOPOFF_CURRENT_MASK; |
| |
| if (data > 0x0F) |
| data = 0x0F; |
| return data * 25 + 100; |
| } |
| |
| enum { |
| S2MU004_CHG_2L_IVR_4300MV = 0, |
| S2MU004_CHG_2L_IVR_4500MV, |
| S2MU004_CHG_2L_IVR_4700MV, |
| S2MU004_CHG_2L_IVR_4900MV, |
| }; |
| |
| #if ENABLE_MIVR |
| /* charger input regulation voltage setting */ |
| static void s2mu004_set_ivr_level(struct s2mu004_charger_data *charger) |
| { |
| int chg_2l_ivr = S2MU004_CHG_2L_IVR_4500MV; |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL5, |
| chg_2l_ivr << SET_CHG_2L_DROP_SHIFT, SET_CHG_2L_DROP_MASK); |
| } |
| #endif /*ENABLE_MIVR*/ |
| |
| static bool s2mu004_chg_init(struct s2mu004_charger_data *charger) |
| { |
| u8 temp; |
| /* Read Charger IC Dev ID */ |
| s2mu004_read_reg(charger->i2c, S2MU004_REG_REV_ID, &temp); |
| charger->dev_id = (temp & 0xF0) >> 4; |
| |
| pr_info("%s : DEV ID : 0x%x\n", __func__, charger->dev_id); |
| |
| /* Poor-Chg-INT Masking */ |
| s2mu004_update_reg(charger->i2c, 0x32, 0x03, 0x03); |
| |
| /* |
| * When Self Discharge Function is activated, Charger doesn't stop charging. |
| * If you write 0xb0[4]=1, charger will stop the charging, when self discharge |
| * condition is satisfied. |
| */ |
| s2mu004_update_reg(charger->i2c, 0xb0, 0x0, 0x1 << 4); |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT1_MASK, |
| Poor_CHG_INT_MASK, Poor_CHG_INT_MASK); |
| |
| s2mu004_write_reg(charger->i2c, 0x02, 0x0); |
| s2mu004_write_reg(charger->i2c, 0x03, 0x0); |
| |
| /* ready for self-discharge, 0x76 */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SELFDIS_CFG3, |
| SELF_DISCHG_MODE_MASK, SELF_DISCHG_MODE_MASK); |
| |
| /* Set Top-Off timer to 90 minutes */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL17, |
| S2MU004_TOPOFF_TIMER_90m << TOP_OFF_TIME_SHIFT, |
| TOP_OFF_TIME_MASK); |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL17, &temp); |
| pr_info("%s : S2MU004_CHG_CTRL17 : 0x%x\n", __func__, temp); |
| |
| /* To prevent entering watchdog issue case we set WDT_CLR to not clear before enabling WDT */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL14, |
| 0x0 << WDT_CLR_SHIFT, WDT_CLR_MASK); |
| |
| /* enable Watchdog timer and only Charging off */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL13, |
| ENABLE << SET_EN_WDT_SHIFT | DISABLE << SET_EN_WDT_AP_RESET_SHIFT, |
| SET_EN_WDT_MASK | SET_EN_WDT_AP_RESET_MASK); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL13, &temp); |
| pr_info("%s : S2MU004_CHG_CTRL13 : 0x%x\n", __func__, temp); |
| |
| /* set watchdog timer to 80 seconds */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL17, |
| S2MU004_WDT_TIMER_80s << WDT_TIME_SHIFT, |
| WDT_TIME_MASK); |
| |
| /* IVR Recovery enable */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL13, |
| 0x1 << SET_IVR_Recovery_SHIFT, SET_IVR_Recovery_MASK); |
| |
| /* Boost OSC 1Mhz */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL15, |
| 0x02 << SET_OSC_BST_SHIFT, SET_OSC_BST_MASK); |
| |
| /* QBAT switch speed config */ |
| s2mu004_update_reg(charger->i2c, 0xB2, 0x0, 0xf << 4); |
| |
| /* Top off debounce time set 1 sec */ |
| s2mu004_update_reg(charger->i2c, 0xC0, 0x3 << 6, 0x3 << 6); |
| |
| /* SC_CTRL21 register Minimum Charging OCP Level set to 6A */ |
| s2mu004_write_reg(charger->i2c, 0x29, 0x04); |
| |
| if (charger->pdata->chg_freq_ctrl) { |
| switch (charger->pdata->chg_switching_freq) { |
| case S2MU004_OSC_BUCK_FRQ_750kHz: |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL12, |
| S2MU004_OSC_BUCK_FRQ_750kHz << SET_OSC_BUCK_SHIFT, SET_OSC_BUCK_MASK); |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL12, |
| S2MU004_OSC_BUCK_FRQ_750kHz << SET_OSC_BUCK_3L_SHIFT, SET_OSC_BUCK_3L_MASK); |
| break; |
| default: |
| /* Set OSC BUCK/BUCK 3L frequencies to default 1MHz */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL12, |
| S2MU004_OSC_BUCK_FRQ_1MHz << SET_OSC_BUCK_SHIFT, SET_OSC_BUCK_MASK); |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL12, |
| S2MU004_OSC_BUCK_FRQ_1MHz << SET_OSC_BUCK_3L_SHIFT, SET_OSC_BUCK_3L_MASK); |
| break; |
| } |
| } |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL12, &temp); |
| pr_info("%s : S2MU004_CHG_CTRL12 : 0x%x\n", __func__, temp); |
| |
| /* |
| * Disable auto-restart charging feature. |
| * Prevent charging restart after top-off timer expires |
| */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL7, 0x0 << 7, EN_CHG_RESTART_MASK); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL7, &temp); |
| pr_info("%s : S2MU004_CHG_CTRL7 : 0x%x\n", __func__, temp); |
| |
| return true; |
| } |
| |
| static int s2mu004_get_charging_status( |
| struct s2mu004_charger_data *charger) |
| { |
| int status = POWER_SUPPLY_STATUS_UNKNOWN; |
| int ret; |
| u8 chg_sts0, chg_sts1; |
| union power_supply_propval value; |
| |
| ret = s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS0, &chg_sts0); |
| ret = s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS1, &chg_sts1); |
| |
| psy_do_property(charger->pdata->fuelgauge_name, get, |
| POWER_SUPPLY_PROP_CURRENT_AVG, value); |
| |
| if (ret < 0) |
| return status; |
| |
| if (chg_sts1 & 0x80) |
| status = POWER_SUPPLY_STATUS_DISCHARGING; |
| else if (chg_sts1 & 0x02 || chg_sts1 & 0x01) { |
| pr_info("%s: full check curr_avg(%d), topoff_curr(%d)\n", |
| __func__, value.intval, charger->topoff_current); |
| if (value.intval < charger->topoff_current) |
| status = POWER_SUPPLY_STATUS_FULL; |
| else |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| } else if ((chg_sts0 & 0xE0) == 0xA0 || (chg_sts0 & 0xE0) == 0x60) |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| else |
| status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| return status; |
| } |
| |
| static bool s2mu004_get_batt_present(struct s2mu004_charger_data *charger) |
| { |
| u8 ret; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, &ret); |
| if (ret < 0) |
| return false; |
| |
| return (ret & DET_BAT_STATUS_MASK) ? true : false; |
| } |
| |
| static void s2mu004_wdt_clear(struct s2mu004_charger_data *charger) |
| { |
| u8 reg_data, chg_fault_status, en_chg; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL13, ®_data); |
| if (!(reg_data & 0x02)) { |
| pr_info("%s : WDT disabled BUT Clear requested!\n", __func__); |
| pr_info("%s : S2MU004_CHG_CTRL13 : 0x%x\n", __func__, reg_data); |
| |
| /* To prevent entering watchdog issue case we set WDT_CLR to not clear before enabling WDT */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL14, |
| 0x0 << WDT_CLR_SHIFT, WDT_CLR_MASK); |
| |
| /* enable Watchdog timer and only Charging off */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL13, |
| ENABLE << SET_EN_WDT_SHIFT | DISABLE << SET_EN_WDT_AP_RESET_SHIFT, |
| SET_EN_WDT_MASK | SET_EN_WDT_AP_RESET_MASK); |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL13, ®_data); |
| pr_info("%s : S2MU004_CHG_CTRL13 : 0x%x\n", __func__, reg_data); |
| } |
| |
| /* watchdog kick */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL14, |
| 0x1 << WDT_CLR_SHIFT, WDT_CLR_MASK); |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS1, ®_data); |
| chg_fault_status = (reg_data & CHG_FAULT_STATUS_MASK) >> CHG_FAULT_STATUS_SHIFT; |
| |
| if ((chg_fault_status == CHG_STATUS_WD_SUSPEND) || |
| (chg_fault_status == CHG_STATUS_WD_RST)) { |
| pr_info("%s: watchdog error status(0x%02x,%d)\n", |
| __func__, reg_data, chg_fault_status); |
| if (charger->is_charging) { |
| pr_info("%s: toggle charger\n", __func__); |
| s2mu004_enable_charger_switch(charger, false); |
| s2mu004_enable_charger_switch(charger, true); |
| } |
| } |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL0, &en_chg); |
| if (!(en_chg & 0x80)) |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL0, |
| 0x1 << EN_CHG_SHIFT, EN_CHG_MASK); |
| } |
| |
| static int s2mu004_get_charging_health(struct s2mu004_charger_data *charger) |
| { |
| |
| u8 ret; |
| union power_supply_propval value; |
| if (charger->is_charging) |
| s2mu004_wdt_clear(charger); |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS0, &ret); |
| pr_info("[DEBUG] %s: S2MU004_CHG_STATUS0 0x%x\n", __func__, ret); |
| if (ret < 0) |
| return POWER_SUPPLY_HEALTH_UNKNOWN; |
| |
| if (is_wireless_type(charger->cable_type)) { |
| ret = (ret & (WCIN_STATUS_MASK)) >> WCIN_STATUS_SHIFT; |
| } else { |
| ret = (ret & (CHGIN_STATUS_MASK)) >> CHGIN_STATUS_SHIFT; |
| } |
| |
| switch (ret) { |
| case 0x03: |
| case 0x05: |
| charger->ovp = false; |
| charger->unhealth_cnt = 0; |
| return POWER_SUPPLY_HEALTH_GOOD; |
| default: |
| break; |
| } |
| |
| charger->unhealth_cnt++; |
| if (charger->unhealth_cnt < HEALTH_DEBOUNCE_CNT) |
| return POWER_SUPPLY_HEALTH_GOOD; |
| |
| /* 005 need to check ovp & health count */ |
| charger->unhealth_cnt = HEALTH_DEBOUNCE_CNT; |
| if (charger->ovp) |
| return POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_ONLINE, value); |
| if (value.intval == SEC_BATTERY_CABLE_PDIC) |
| return POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| else |
| return POWER_SUPPLY_HEALTH_GOOD; |
| } |
| |
| static int s2mu004_chg_create_attrs(struct device *dev) |
| { |
| unsigned long i; |
| int rc; |
| |
| for (i = 0; i < ARRAY_SIZE(s2mu004_charger_attrs); i++) { |
| rc = device_create_file(dev, &s2mu004_charger_attrs[i]); |
| if (rc) |
| goto create_attrs_failed; |
| } |
| return rc; |
| |
| create_attrs_failed: |
| dev_err(dev, "%s: failed (%d)\n", __func__, rc); |
| while (i--) |
| device_remove_file(dev, &s2mu004_charger_attrs[i]); |
| return rc; |
| } |
| |
| ssize_t s2mu004_chg_show_attrs(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| const ptrdiff_t offset = attr - s2mu004_charger_attrs; |
| int i = 0; |
| |
| switch (offset) { |
| case CHIP_ID: |
| i += scnprintf(buf + i, PAGE_SIZE - i, "%s\n", "S2MU004"); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return i; |
| } |
| |
| ssize_t s2mu004_chg_store_attrs(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| const ptrdiff_t offset = attr - s2mu004_charger_attrs; |
| int ret = 0; |
| |
| switch (offset) { |
| case CHIP_ID: |
| ret = count; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| static int s2mu004_chg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| int chg_curr, aicr; |
| struct s2mu004_charger_data *charger = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = charger->charging_current ? 1 : 0; |
| break; |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = s2mu004_get_charging_status(charger); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = s2mu004_get_charging_health(charger); |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = s2mu004_get_input_current_limit(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| if (charger->charging_current) { |
| aicr = s2mu004_get_input_current_limit(charger); |
| chg_curr = s2mu004_get_fast_charging_current(charger); |
| val->intval = MINVAL(aicr, chg_curr); |
| } else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| val->intval = s2mu004_get_fast_charging_current(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_FULL: |
| val->intval = s2mu004_get_topoff_setting(charger); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| if ((!charger->is_charging) || (charger->cable_type == SEC_BATTERY_CABLE_NONE)) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| else |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| break; |
| #if defined(CONFIG_BATTERY_SWELLING) || defined(CONFIG_BATTERY_SWELLING_SELF_DISCHARGING) |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| val->intval = s2mu004_get_regulation_voltage(charger); |
| break; |
| #endif |
| #if defined(CONFIG_AFC_CHARGER_MODE) |
| case POWER_SUPPLY_PROP_AFC_CHARGER_MODE: |
| return -ENODATA; |
| #endif |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = s2mu004_get_batt_present(charger); |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| val->intval = charger->is_charging; |
| break; |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION: |
| break; |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| return -ENODATA; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int s2mu004_chg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct s2mu004_charger_data *charger = power_supply_get_drvdata(psy); |
| enum power_supply_ext_property ext_psp = psp; |
| int buck_state = ENABLE; |
| union power_supply_propval value; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| charger->status = val->intval; |
| break; |
| /* val->intval : type */ |
| case POWER_SUPPLY_PROP_ONLINE: |
| charger->cable_type = val->intval; |
| charger->ivr_on = false; |
| if (charger->cable_type != SEC_BATTERY_CABLE_OTG) { |
| if (charger->cable_type == SEC_BATTERY_CABLE_NONE || |
| charger->cable_type == SEC_BATTERY_CABLE_UNKNOWN) { |
| value.intval = 0; |
| } else { |
| #if ENABLE_MIVR |
| s2mu004_set_ivr_level(charger); |
| #endif |
| value.intval = 1; |
| } |
| psy_do_property(charger->pdata->fuelgauge_name, |
| set, POWER_SUPPLY_PROP_ENERGY_AVG, value); |
| } |
| |
| #if EN_IVR_IRQ |
| if (charger->cable_type == SEC_BATTERY_CABLE_NONE) { |
| /* At cable removal enable IVR IRQ if it was disabled */ |
| if (charger->irq_ivr_enabled == 0) { |
| u8 reg_data; |
| |
| charger->irq_ivr_enabled = 1; |
| /* Unmask IRQ */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, |
| 0 << IVR_M_SHIFT, IVR_M_MASK); |
| enable_irq(charger->irq_ivr); |
| s2mu004_read_reg(charger->i2c, |
| S2MU004_REG_SC_INT2_MASK, ®_data); |
| pr_info("%s : enable ivr : 0x%x\n", __func__, reg_data); |
| } |
| } |
| #endif |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| { |
| int input_current = val->intval; |
| |
| s2mu004_set_input_current_limit(charger, input_current); |
| charger->input_current = input_current; |
| } |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| pr_info("[DEBUG] %s: is_charging %d\n", __func__, charger->is_charging); |
| charger->charging_current = val->intval; |
| /* set charging current */ |
| s2mu004_set_fast_charging_current(charger, charger->charging_current); |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_FULL: |
| charger->topoff_current = val->intval; |
| if (charger->pdata->chg_eoc_dualpath) { |
| s2mu004_set_topoff_current(charger, 1, val->intval); |
| s2mu004_set_topoff_current(charger, 2, 100); |
| } else |
| s2mu004_set_topoff_current(charger, 1, val->intval); |
| break; |
| |
| #if defined(CONFIG_BATTERY_SWELLING) || defined(CONFIG_BATTERY_SWELLING_SELF_DISCHARGING) |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| pr_info("[DEBUG]%s: float voltage(%d)\n", __func__, val->intval); |
| charger->pdata->chg_float_voltage = val->intval; |
| s2mu004_set_regulation_voltage(charger, |
| charger->pdata->chg_float_voltage); |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| s2mu004_charger_otg_control(charger, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| charger->charge_mode = val->intval; |
| psy_do_property("battery", get, POWER_SUPPLY_PROP_ONLINE, value); |
| charger->cable_type = value.intval; |
| |
| if (value.intval != SEC_BATTERY_CABLE_OTG) { |
| switch (charger->charge_mode) { |
| case SEC_BAT_CHG_MODE_BUCK_OFF: |
| buck_state = DISABLE; |
| case SEC_BAT_CHG_MODE_CHARGING_OFF: |
| charger->is_charging = false; |
| break; |
| case SEC_BAT_CHG_MODE_CHARGING: |
| charger->is_charging = true; |
| break; |
| } |
| value.intval = charger->is_charging; |
| psy_do_property("s2mu004-fuelgauge", set, |
| POWER_SUPPLY_PROP_CHARGING_ENABLED, value); |
| |
| if (buck_state) { |
| s2mu004_enable_charger_switch(charger, charger->is_charging); |
| } else { |
| /* set buck off only if SEC_BAT_CHG_MODE_BUCK_OFF */ |
| s2mu004_set_buck(charger, buck_state); |
| } |
| } else { |
| pr_info("[DEBUG]%s: SKIP CHARGING CONTROL while OTG(%d)\n", |
| __func__, value.intval); |
| } |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| #if 0 |
| /* Switch-off charger if JIG is connected */ |
| if (val->intval && factory_mode) { |
| pr_info("%s: JIG Connection status: %d\n", __func__, val->intval); |
| s2mu004_enable_charger_switch(charger, false); |
| } |
| #endif |
| break; |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION: |
| if (val->intval) { |
| pr_info("%s: Relieve VBUS2BAT\n", __func__); |
| s2mu004_write_reg(charger->i2c, 0x2F, 0xDD); |
| s2mu004_update_reg(charger->i2c, 0xDA, 0x10, 0x10); |
| } |
| break; |
| case POWER_SUPPLY_PROP_AUTHENTIC: |
| if (val->intval) { |
| pr_info("%s: Bypass set\n", __func__); |
| s2mu004_update_reg(charger->i2c, 0x22, 0xC0, 0xC0); |
| s2mu004_update_reg(charger->i2c, 0x29, 0x01 << 1, 0x01 << 1); |
| s2mu004_update_reg(charger->i2c, 0x9F, 0x0, 0x01 << 7); |
| s2mu004_update_reg(charger->i2c, 0x10, 0x01 << 5, 0x01 << 5); |
| /* USB LDO off */ |
| s2mu004_update_reg(charger->i2c, S2MU004_PWRSEL_CTRL0, |
| 0 << PWRSEL_CTRL0_SHIFT, PWRSEL_CTRL0_MASK); |
| pr_info("%s additional setting start %d\n", __func__, __LINE__); |
| s2mu004_update_reg(charger->i2c, 0x93, 0x40, 0x40); |
| s2mu004_update_reg(charger->i2c, 0xC6, 0x00, 0x40); |
| s2mu004_update_reg(charger->i2c, 0x8B, 0x00, 0xFF); |
| s2mu004_update_reg(charger->i2c, 0x71, 0x0F, 0xFF); |
| pr_info("%s complete %d\n", __func__, __LINE__); |
| } |
| break; |
| #if EN_IVR_IRQ |
| case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: |
| { |
| u8 reg_data = 0; |
| |
| s2mu004_enable_ivr_irq(charger); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, ®_data); |
| if (reg_data & IVR_STATUS) |
| queue_delayed_work(charger->charger_wqueue, |
| &charger->ivr_work, msecs_to_jiffies(IVR_WORK_DELAY)); |
| break; |
| } |
| #endif |
| #if defined(CONFIG_AFC_CHARGER_MODE) |
| case POWER_SUPPLY_PROP_AFC_CHARGER_MODE: |
| #if defined(CONFIG_HV_MUIC_S2MU004_AFC) |
| s2mu004_hv_muic_charger_init(); |
| #endif |
| break; |
| #endif |
| case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX: |
| switch (ext_psp) { |
| case POWER_SUPPLY_EXT_PROP_FUELGAUGE_RESET: |
| s2mu004_write_reg(charger->i2c, 0x6F, 0xC4); |
| msleep(1000); |
| s2mu004_write_reg(charger->i2c, 0x6F, 0x04); |
| msleep(50); |
| pr_info("%s: reset fuelgauge when surge occur!\n", __func__); |
| break; |
| case POWER_SUPPLY_EXT_PROP_FACTORY_VOLTAGE_REGULATION: |
| /* enable EN_JIG_AP */ |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL1, |
| 1 << EN_JIG_REG_AP_SHIFT, EN_JIG_REG_AP_MASK); |
| pr_info("%s: factory voltage regulation (%d)\n", __func__, val->intval); |
| s2mu004_set_regulation_vsys(charger, val->intval); |
| break; |
| case POWER_SUPPLY_EXT_PROP_ANDIG_IVR_SWITCH: |
| #if !defined(CONFIG_SEC_FACTORY) |
| if (charger->dev_id < 0x3) { |
| s2mu004_analog_ivr_switch(charger, val->intval); |
| } |
| #endif |
| break; |
| case POWER_SUPPLY_EXT_PROP_CURRENT_MEASURE: |
| if (val->intval) { |
| pr_info("%s: Bypass set for current measure\n", __func__); |
| /* |
| * Charger/muic interrupt can occur by entering Bypass mode |
| * Disable all interrupt mask for testing current measure. |
| */ |
| s2mu004_write_reg(charger->i2c, S2MU004_REG_SC_INT1_MASK, 0xFF); |
| s2mu004_write_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, 0xFF); |
| s2mu004_write_reg(charger->i2c, S2MU004_REG_AFC_INT_MASK, 0xFF); |
| s2mu004_write_reg(charger->i2c, S2MU004_REG_MUIC_INT1_MASK, 0xFF); |
| s2mu004_write_reg(charger->i2c, S2MU004_REG_MUIC_INT2_MASK, 0xFF); |
| |
| /* Enter Bypass mode set for current measure */ |
| s2mu004_update_reg(charger->i2c, 0x10, 0x01 << 4, 0x01 << 4); |
| s2mu004_write_reg(charger->i2c, 0x12, 0x7f); |
| s2mu004_write_reg(charger->i2c, 0x2f, 0xdd); |
| msleep(500); |
| s2mu004_update_reg(charger->i2c, 0x22, 0xc0, 0xc0); |
| s2mu004_update_reg(charger->i2c, 0x29, 0x01 << 1, 0x01 << 1); |
| s2mu004_update_reg(charger->i2c, 0x9F, 0x00, 0x80); |
| s2mu004_update_reg(charger->i2c, 0x10, 0x01 << 5, 0x01 << 5); |
| /* USB LDO off */ |
| s2mu004_update_reg(charger->i2c, S2MU004_PWRSEL_CTRL0, |
| 0 << PWRSEL_CTRL0_SHIFT, PWRSEL_CTRL0_MASK); |
| psy_do_property("s2mu004-fuelgauge", set, |
| POWER_SUPPLY_EXT_PROP_FUELGAUGE_FACTORY, value); |
| } else { |
| pr_info("%s: Bypass exit for current measure\n", __func__); |
| s2mu004_update_reg(charger->i2c, 0x29, 0x0, 0x01 << 1); |
| s2mu004_write_reg(charger->i2c, 0x10, 0x00); |
| /* USB LDO on */ |
| s2mu004_update_reg(charger->i2c, S2MU004_PWRSEL_CTRL0, |
| 1 << PWRSEL_CTRL0_SHIFT, PWRSEL_CTRL0_MASK); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int s2mu004_otg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct s2mu004_charger_data *charger = power_supply_get_drvdata(psy); |
| u8 reg; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = charger->otg_on; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_POWERED_OTG_CONTROL: |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS2, ®); |
| pr_info("%s: S2MU004_CHG_STATUS2 : 0x%X\n", __func__, reg); |
| if ((reg & 0xE0) == 0x60) { |
| val->intval = 1; |
| } else { |
| val->intval = 0; |
| } |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_CTRL0, ®); |
| pr_info("%s: S2MU004_CHG_CTRL0 : 0x%X\n", __func__, reg); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int s2mu004_otg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct s2mu004_charger_data *charger = power_supply_get_drvdata(psy); |
| union power_supply_propval value; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| value.intval = val->intval; |
| pr_info("%s: OTG %s\n", __func__, value.intval > 0 ? "ON" : "OFF"); |
| psy_do_property(charger->pdata->charger_name, set, |
| POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, value); |
| power_supply_changed(charger->psy_otg); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_S2MU004_WIRELESS_CHARGER) |
| static void wpc_detect_work(struct work_struct *work) |
| { |
| struct s2mu004_charger_data *charger = container_of(work, |
| struct s2mu004_charger_data, |
| wpc_work.work); |
| int wc_w_state; |
| int retry_cnt; |
| union power_supply_propval value; |
| u8 reg_data; |
| |
| pr_info("%s\n", __func__); |
| |
| retry_cnt = 0; |
| do { |
| s2mu004_read_reg(charger->i2c, |
| S2MU004_CHG_STATUS0, ®_data); |
| reg_data = (reg_data & (WCIN_STATUS_MASK)) >> WCIN_STATUS_SHIFT; |
| |
| pr_info("%s S2MU004_CHG_STATUS0: 0x%x\n", __func__, reg_data); |
| |
| wc_w_state = ((reg_data == 0x05) || (reg_data == 0x03) || |
| (reg_data == 0x07) || (reg_data == 0x01)); |
| |
| if (wc_w_state == 0) |
| msleep(50); |
| } while ((retry_cnt++ < 2) && (wc_w_state == 0)); |
| |
| if ((charger->wc_w_state == 0) && (wc_w_state == 1)) { |
| value.intval = 1; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| value.intval = SEC_BATTERY_CABLE_WIRELESS; |
| pr_info("%s: wpc activated, set V_INT as PN\n", |
| __func__); |
| } else if ((charger->wc_w_state == 1) && (wc_w_state == 0)) { |
| if (!charger->is_charging) |
| s2mu004_enable_charger_switch(charger, true); |
| |
| retry_cnt = 0; |
| do { |
| s2mu004_read_reg(charger->i2c, |
| S2MU004_CHG_STATUS0, ®_data); |
| reg_data = (reg_data & (WCIN_STATUS_MASK)) >> WCIN_STATUS_SHIFT; |
| msleep(50); |
| } while ((retry_cnt++ < 2) && |
| ((reg_data != 0x05) || (reg_data != 0x03))); |
| pr_info("%s: reg_data: 0x%x, charging: %d\n", __func__, |
| reg_data, charger->is_charging); |
| if (!charger->is_charging) |
| s2mu004_enable_charger_switch(charger, false); |
| /* To-Do: CHECK for reg_data value 0x01 cases */ |
| if (((reg_data == 0x05) || (reg_data == 0x03) || |
| (reg_data == 0x07) || (reg_data == 0x01)) && |
| (is_wireless_type(charger->cable_type))) { |
| pr_info("%s: wpc uvlo, but charging\n", __func__); |
| |
| if ((reg_data == 0x07) || (reg_data == 0x01)) { |
| pr_info( |
| "%s: Abnormal WPC state, maintain charging: reg_data: 0x%x\n", |
| __func__, reg_data); |
| } |
| queue_delayed_work(charger->charger_wqueue, &charger->wpc_work, |
| msecs_to_jiffies(500)); |
| return; |
| } else { |
| value.intval = 0; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| |
| /* this code is for preventing reactivation of the wireless charger outside of pad*/ |
| value.intval = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| psy_do_property(charger->pdata->wireless_charger_name, set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| |
| pr_info("%s: wpc deactivated, set V_INT as PD\n", |
| __func__); |
| } |
| } |
| pr_info("%s: w(%d to %d)\n", __func__, |
| charger->wc_w_state, wc_w_state); |
| |
| charger->wc_w_state = wc_w_state; |
| |
| /* Do unmask again. (for frequent wcin irq problem) */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT1_MASK, |
| 0 << WCIN_M_SHIFT, WCIN_M_MASK); |
| |
| wake_unlock(&charger->wpc_wake_lock); |
| } |
| #endif |
| |
| #ifndef CONFIG_SEC_FACTORY |
| static void s2mu004_charger_otg_vbus_work(struct work_struct *work) |
| { |
| struct s2mu004_charger_data *charger = container_of(work, |
| struct s2mu004_charger_data, |
| otg_vbus_work.work); |
| |
| s2mu004_update_reg(charger->i2c, S2MU004_CHG_CTRL7, 0x2 << SET_VF_VBYP_SHIFT, SET_VF_VBYP_MASK); |
| return; |
| } |
| #endif |
| |
| #if EN_BAT_DET_IRQ |
| /* s2mu004 interrupt service routine */ |
| static irqreturn_t s2mu004_det_bat_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| u8 val; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, &val); |
| pr_info("[IRQ] %s, STATUS3 : %02x\n", __func__, val); |
| if ((val & DET_BAT_STATUS_MASK) == 0) { |
| s2mu004_enable_charger_switch(charger, 0); |
| pr_err("charger-off if battery removed\n"); |
| } |
| return IRQ_HANDLED; |
| } |
| #endif |
| |
| static irqreturn_t s2mu004_done_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| u8 val; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS1, &val); |
| pr_info("[IRQ] %s, STATUS1 : %02x\n", __func__, val); |
| if (val & (DONE_STATUS_MASK)) { |
| pr_err("add self chg done\n"); |
| /* add chg done code here */ |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu004_chg_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| union power_supply_propval value; |
| u8 val; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS0, &val); |
| pr_info("[IRQ] %s, STATUS0 : 0x%02x\n", __func__, val); |
| #if EN_OVP_IRQ |
| if ((val & CHGIN_STATUS_MASK) == (2 << CHGIN_STATUS_SHIFT)) { |
| charger->ovp = true; |
| pr_info("%s: OVP triggered\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| s2mu004_update_reg(charger->i2c, 0xBE, 0x10, 0x10); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if ((val & CHGIN_STATUS_MASK) == (3 << CHGIN_STATUS_SHIFT) || |
| (val & CHGIN_STATUS_MASK) == (5 << CHGIN_STATUS_SHIFT)) { |
| pr_info("%s: Vbus status 0x%x\n", __func__, val); |
| charger->unhealth_cnt = HEALTH_DEBOUNCE_CNT; |
| if (charger->ovp == true) |
| pr_info("%s: recover from OVP\n", __func__); |
| charger->ovp = false; |
| value.intval = POWER_SUPPLY_HEALTH_GOOD; |
| s2mu004_update_reg(charger->i2c, 0xBE, 0x00, 0x10); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| |
| } |
| #endif |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu004_event_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| u8 val0, val1, val2, val3; |
| |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS0, &val0); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS1, &val1); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS2, &val2); |
| s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, &val3); |
| pr_info("[IRQ] %s, STATUS0:0x%02x, STATUS1:0x%02x, STATUS2:0x%02x, STATUS3:0x%02x\n", |
| __func__, val0, val1, val2, val3); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu004_ovp_isr(int irq, void *data) |
| { |
| pr_info("%s ovp!\n", __func__); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #if EN_IVR_IRQ |
| static void s2mu004_ivr_irq_work(struct work_struct *work) |
| { |
| struct s2mu004_charger_data *charger = container_of(work, |
| struct s2mu004_charger_data, ivr_work.work); |
| u8 ivr_state; |
| int ret; |
| int ivr_cnt = 0; |
| |
| pr_info("%s:\n", __func__); |
| |
| if (charger->cable_type == SEC_BATTERY_CABLE_NONE) { |
| u8 ivr_mask; |
| |
| pr_info("%s : skip\n", __func__); |
| s2mu004_read_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, &ivr_mask); |
| if (ivr_mask & 0x02) { |
| /* Unmask IRQ */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, |
| 0 << IVR_M_SHIFT, IVR_M_MASK); |
| } |
| wake_unlock(&charger->ivr_wake_lock); |
| return; |
| } |
| |
| ret = s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, &ivr_state); |
| if (ret < 0) { |
| wake_unlock(&charger->ivr_wake_lock); |
| pr_info("%s : I2C error\n", __func__); |
| /* Unmask IRQ */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, |
| 0 << IVR_M_SHIFT, IVR_M_MASK); |
| return; |
| } |
| pr_info("%s: ivr_status 0x0D:0x%02x\n", __func__, ivr_state); |
| |
| mutex_lock(&charger->charger_mutex); |
| |
| while ((ivr_state & IVR_STATUS) && |
| charger->cable_type != SEC_BATTERY_CABLE_NONE) { |
| |
| if (s2mu004_read_reg(charger->i2c, S2MU004_CHG_STATUS3, &ivr_state)) { |
| pr_err("%s: Error reading S2MU004_CHG_STATUS3\n", __func__); |
| break; |
| } |
| pr_info("%s: ivr_status 0x0D:0x%02x\n", __func__, ivr_state); |
| |
| if (++ivr_cnt >= 2) { |
| reduce_input_current(charger); |
| ivr_cnt = 0; |
| } |
| msleep(50); |
| |
| if (!(ivr_state & IVR_STATUS)) { |
| pr_info("%s: EXIT IVR WORK: check value (0x0D:0x%02x, input current:%d)\n", __func__, |
| ivr_state, charger->input_current); |
| break; |
| } |
| |
| if (s2mu004_get_input_current_limit(charger) <= MINIMUM_INPUT_CURRENT) |
| break; |
| } |
| |
| if (charger->ivr_on) { |
| union power_supply_propval value; |
| |
| if ((charger->irq_ivr_enabled == 1) && |
| (charger->input_current <= MINIMUM_INPUT_CURRENT)) { |
| /* Disable IVR IRQ, can't reduce current any more */ |
| u8 reg_data; |
| |
| charger->irq_ivr_enabled = 0; |
| disable_irq_nosync(charger->irq_ivr); |
| /* Mask IRQ */ |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_REG_SC_INT2_MASK, S2MU004_IVR_M, S2MU004_IVR_M); |
| s2mu004_read_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, ®_data); |
| pr_info("%s : disable ivr : 0x%x\n", __func__, reg_data); |
| } |
| |
| value.intval = s2mu004_get_input_current_limit(charger); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_EXT_PROP_AICL_CURRENT, value); |
| } |
| |
| if (charger->irq_ivr_enabled == 1) { |
| /* Unmask IRQ */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, |
| 0 << IVR_M_SHIFT, IVR_M_MASK); |
| } |
| mutex_unlock(&charger->charger_mutex); |
| wake_unlock(&charger->ivr_wake_lock); |
| } |
| |
| static irqreturn_t s2mu004_ivr_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| |
| pr_info("%s: Start\n", __func__); |
| wake_lock(&charger->ivr_wake_lock); |
| /* Mask IRQ */ |
| s2mu004_update_reg(charger->i2c, |
| S2MU004_REG_SC_INT2_MASK, S2MU004_IVR_M, S2MU004_IVR_M); |
| queue_delayed_work(charger->charger_wqueue, &charger->ivr_work, |
| msecs_to_jiffies(IVR_WORK_DELAY)); |
| pr_info("%s: irq(%d)\n", __func__, irq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void s2mu004_enable_ivr_irq(struct s2mu004_charger_data *charger) |
| { |
| int ret; |
| |
| ret = request_threaded_irq(charger->irq_ivr, NULL, |
| s2mu004_ivr_isr, 0, "ivr-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: Fail to request IVR_INT IRQ: %d: %d\n", |
| __func__, charger->irq_ivr, ret); |
| charger->irq_ivr_enabled = -1; |
| } else { |
| /* Unmask IRQ */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT2_MASK, |
| 0 << IVR_M_SHIFT, IVR_M_MASK); |
| charger->irq_ivr_enabled = 1; |
| } |
| pr_info("%s enabled : %d\n", __func__, charger->irq_ivr_enabled); |
| } |
| #endif |
| |
| #if defined(CONFIG_S2MU004_WIRELESS_CHARGER) |
| static irqreturn_t s2mu004_chg_wpcin_isr(int irq, void *data) |
| { |
| struct s2mu004_charger_data *charger = data; |
| unsigned long delay; |
| |
| /* Mask WCIN to prevent frequent WPC interrupts */ |
| s2mu004_update_reg(charger->i2c, S2MU004_REG_SC_INT1_MASK, |
| 1 << WCIN_M_SHIFT, WCIN_M_MASK); |
| |
| #ifdef CONFIG_SAMSUNG_BATTERY_FACTORY |
| delay = msecs_to_jiffies(0); |
| #else |
| if (charger->wc_w_state) |
| delay = msecs_to_jiffies(500); |
| else |
| delay = msecs_to_jiffies(0); |
| #endif |
| pr_info("IRQ=%d delay = %ld\n", irq, delay); |
| |
| wake_lock(&charger->wpc_wake_lock); |
| queue_delayed_work(charger->charger_wqueue, &charger->wpc_work, delay); |
| |
| return IRQ_HANDLED; |
| } |
| #endif |
| |
| static int s2mu004_charger_parse_dt(struct device *dev, |
| struct s2mu004_charger_platform_data *pdata) |
| { |
| struct device_node *np = of_find_node_by_name(NULL, "s2mu004-charger"); |
| int ret = 0; |
| |
| if (!np) { |
| pr_err("%s np NULL(s2mu004-charger)\n", __func__); |
| } else { |
| pdata->chg_freq_ctrl = of_property_read_bool(np, |
| "battery,chg_freq_ctrl"); |
| ret = of_property_read_u32(np, "battery,chg_switching_freq", |
| &pdata->chg_switching_freq); |
| if (ret < 0) { |
| pr_info("%s: Charger switching FRQ is Empty\n", __func__); |
| } else { |
| pr_info("%s: Charger switching is: 0x%x\n", __func__, |
| pdata->chg_switching_freq); |
| } |
| } |
| |
| np = of_find_node_by_name(NULL, "battery"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_string(np, |
| "battery,fuelgauge_name", |
| (char const **)&pdata->fuelgauge_name); |
| if (ret < 0) |
| pr_info("%s: Fuel-gauge name is Empty\n", __func__); |
| |
| ret = of_property_read_u32(np, "battery,chg_float_voltage", |
| &pdata->chg_float_voltage); |
| if (ret) { |
| pr_info("%s: battery,chg_float_voltage is Empty\n", __func__); |
| pdata->chg_float_voltage = 4200; |
| } |
| pr_info("%s: battery,chg_float_voltage is %d\n", |
| __func__, pdata->chg_float_voltage); |
| |
| pdata->chg_eoc_dualpath = of_property_read_bool(np, |
| "battery,chg_eoc_dualpath"); |
| } |
| |
| np = of_find_node_by_name(NULL, "sec-multi-charger"); |
| if (!np) { |
| pr_err("%s np NULL(sec-multi-charger)\n", __func__); |
| } else { |
| ret = of_property_read_string(np, |
| "charger,main_charger", |
| (char const **)&pdata->charger_name); |
| if (ret < 0) |
| pr_info("%s: Charger name is Empty\n", __func__); |
| } |
| |
| pr_info("%s DT file parsed successfully, %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* if need to set s2mu004 pdata */ |
| static struct of_device_id s2mu004_charger_match_table[] = { |
| { .compatible = "samsung,s2mu004-charger",}, |
| {}, |
| }; |
| |
| static const struct power_supply_desc s2mu004_charger_power_supply_desc = { |
| .name = "s2mu004-charger", |
| .type = POWER_SUPPLY_TYPE_UNKNOWN, |
| .get_property = s2mu004_chg_get_property, |
| .set_property = s2mu004_chg_set_property, |
| .properties = s2mu004_charger_props, |
| .num_properties = ARRAY_SIZE(s2mu004_charger_props), |
| }; |
| |
| static const struct power_supply_desc otg_power_supply_desc = { |
| .name = "otg", |
| .type = POWER_SUPPLY_TYPE_OTG, |
| .get_property = s2mu004_otg_get_property, |
| .set_property = s2mu004_otg_set_property, |
| .properties = s2mu004_otg_props, |
| .num_properties = ARRAY_SIZE(s2mu004_otg_props), |
| }; |
| |
| static int s2mu004_charger_probe(struct platform_device *pdev) |
| { |
| struct s2mu004_dev *s2mu004 = dev_get_drvdata(pdev->dev.parent); |
| struct s2mu004_platform_data *pdata = dev_get_platdata(s2mu004->dev); |
| struct s2mu004_charger_data *charger; |
| struct power_supply_config psy_cfg = {}; |
| |
| int ret = 0; |
| |
| pr_info("%s:[BATT] S2MU004 Charger driver probe\n", __func__); |
| charger = kzalloc(sizeof(*charger), GFP_KERNEL); |
| if (!charger) |
| return -ENOMEM; |
| |
| mutex_init(&charger->charger_mutex); |
| charger->otg_on = false; |
| charger->ivr_on = false; |
| |
| charger->dev = &pdev->dev; |
| charger->i2c = s2mu004->i2c; |
| |
| charger->pdata = devm_kzalloc(&pdev->dev, sizeof(*(charger->pdata)), |
| GFP_KERNEL); |
| if (!charger->pdata) { |
| dev_err(&pdev->dev, "Failed to allocate memory\n"); |
| ret = -ENOMEM; |
| goto err_parse_dt_nomem; |
| } |
| ret = s2mu004_charger_parse_dt(&pdev->dev, charger->pdata); |
| if (ret < 0) |
| goto err_parse_dt; |
| |
| platform_set_drvdata(pdev, charger); |
| |
| if (charger->pdata->charger_name == NULL) |
| charger->pdata->charger_name = "s2mu004-charger"; |
| if (charger->pdata->fuelgauge_name == NULL) |
| charger->pdata->fuelgauge_name = "s2mu004-fuelgauge"; |
| |
| s2mu004_chg_init(charger); |
| charger->input_current = s2mu004_get_input_current_limit(charger); |
| charger->charging_current = s2mu004_get_fast_charging_current(charger); |
| |
| psy_cfg.drv_data = charger; |
| psy_cfg.supplied_to = s2mu004_supplied_to; |
| psy_cfg.num_supplicants = ARRAY_SIZE(s2mu004_supplied_to), |
| |
| charger->psy_chg = power_supply_register(&pdev->dev, &s2mu004_charger_power_supply_desc, &psy_cfg); |
| if (ret) { |
| goto err_power_supply_register; |
| } |
| |
| charger->psy_otg = power_supply_register(&pdev->dev, &otg_power_supply_desc, &psy_cfg); |
| if (ret) { |
| goto err_power_supply_register_otg; |
| } |
| |
| charger->charger_wqueue = create_singlethread_workqueue("charger-wq"); |
| if (!charger->charger_wqueue) { |
| pr_info("%s: failed to create wq.\n", __func__); |
| ret = -ESRCH; |
| goto err_create_wq; |
| } |
| |
| #if EN_IVR_IRQ |
| wake_lock_init(&charger->ivr_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger-ivr"); |
| INIT_DELAYED_WORK(&charger->ivr_work, s2mu004_ivr_irq_work); |
| #endif |
| |
| /* |
| * irq request |
| * if you need to add an irq, please refer to the code below. |
| */ |
| charger->irq_sys = pdata->irq_base + S2MU004_CHG1_IRQ_SYS; |
| ret = request_threaded_irq(charger->irq_sys, NULL, |
| s2mu004_ovp_isr, 0, "sys-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request SYS in IRQ: %d: %d\n", |
| __func__, charger->irq_sys, ret); |
| goto err_reg_irq; |
| } |
| |
| #if EN_BAT_DET_IRQ |
| charger->irq_det_bat = pdata->irq_base + S2MU004_CHG2_IRQ_DET_BAT; |
| ret = request_threaded_irq(charger->irq_det_bat, NULL, |
| s2mu004_det_bat_isr, 0, "det_bat-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request DET_BAT in IRQ: %d: %d\n", |
| __func__, charger->irq_det_bat, ret); |
| goto err_reg_irq; |
| } |
| #endif |
| charger->irq_chgin = pdata->irq_base + S2MU004_CHG1_IRQ_CHGIN; |
| ret = request_threaded_irq(charger->irq_chgin, NULL, |
| s2mu004_chg_isr, 0, "chgin-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request CHGIN in IRQ: %d: %d\n", |
| __func__, charger->irq_chgin, ret); |
| goto err_reg_irq; |
| } |
| |
| charger->irq_rst = pdata->irq_base + S2MU004_CHG1_IRQ_CHG_RSTART; |
| ret = request_threaded_irq(charger->irq_rst, NULL, |
| s2mu004_chg_isr, 0, "restart-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request CHG_Restart in IRQ: %d: %d\n", |
| __func__, charger->irq_rst, ret); |
| goto err_reg_irq; |
| } |
| |
| charger->irq_done = pdata->irq_base + S2MU004_CHG1_IRQ_DONE; |
| ret = request_threaded_irq(charger->irq_done, NULL, |
| s2mu004_done_isr, 0, "done-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request DONE in IRQ: %d: %d\n", |
| __func__, charger->irq_done, ret); |
| goto err_reg_irq; |
| } |
| |
| charger->irq_chg_fault = pdata->irq_base + S2MU004_CHG1_IRQ_CHG_Fault; |
| ret = request_threaded_irq(charger->irq_chg_fault, NULL, |
| s2mu004_event_isr, 0, "chg_fault-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request CHG_Fault in IRQ: %d: %d\n", |
| __func__, charger->irq_chg_fault, ret); |
| goto err_reg_irq; |
| } |
| |
| charger->irq_bat = pdata->irq_base + S2MU004_CHG2_IRQ_BAT; |
| ret = request_threaded_irq(charger->irq_bat, NULL, |
| s2mu004_event_isr, 0, "bat-irq", charger); |
| if (ret < 0) { |
| dev_err(s2mu004->dev, "%s: Fail to request DET_BAT in IRQ: %d: %d\n", |
| __func__, charger->irq_bat, ret); |
| goto err_reg_irq; |
| } |
| |
| #if EN_IVR_IRQ |
| charger->irq_ivr_enabled = -1; |
| charger->irq_ivr = pdata->irq_base + S2MU004_CHG2_IRQ_IVR; |
| #endif |
| |
| ret = s2mu004_chg_create_attrs(&charger->psy_chg->dev); |
| if (ret) { |
| dev_err(charger->dev,"%s : Failed to create_attrs\n", __func__); |
| goto err_reg_irq; |
| } |
| |
| #ifndef CONFIG_SEC_FACTORY |
| INIT_DELAYED_WORK(&charger->otg_vbus_work, s2mu004_charger_otg_vbus_work); |
| #endif |
| #if EN_TEST_READ |
| s2mu004_test_read(charger->i2c); |
| #endif |
| pr_info("%s:[BATT] S2MU004 charger driver loaded OK\n", __func__); |
| |
| return 0; |
| |
| err_reg_irq: |
| destroy_workqueue(charger->charger_wqueue); |
| power_supply_unregister(charger->psy_otg); |
| err_create_wq: |
| err_power_supply_register_otg: |
| power_supply_unregister(charger->psy_chg); |
| err_power_supply_register: |
| err_parse_dt: |
| err_parse_dt_nomem: |
| mutex_destroy(&charger->charger_mutex); |
| kfree(charger); |
| return ret; |
| } |
| |
| static int s2mu004_charger_remove(struct platform_device *pdev) |
| { |
| struct s2mu004_charger_data *charger = |
| platform_get_drvdata(pdev); |
| |
| power_supply_unregister(charger->psy_chg); |
| mutex_destroy(&charger->charger_mutex); |
| kfree(charger); |
| return 0; |
| } |
| |
| #if defined CONFIG_PM |
| static int s2mu004_charger_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int s2mu004_charger_resume(struct device *dev) |
| { |
| return 0; |
| } |
| #else |
| #define s2mu004_charger_suspend NULL |
| #define s2mu004_charger_resume NULL |
| #endif |
| |
| static void s2mu004_charger_shutdown(struct device *dev) |
| { |
| pr_info("%s: S2MU004 Charger driver shutdown\n", __func__); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(s2mu004_charger_pm_ops, s2mu004_charger_suspend, |
| s2mu004_charger_resume); |
| |
| static struct platform_driver s2mu004_charger_driver = { |
| .driver = { |
| .name = "s2mu004-charger", |
| .owner = THIS_MODULE, |
| .of_match_table = s2mu004_charger_match_table, |
| .pm = &s2mu004_charger_pm_ops, |
| .shutdown = s2mu004_charger_shutdown, |
| }, |
| .probe = s2mu004_charger_probe, |
| .remove = s2mu004_charger_remove, |
| }; |
| |
| static int __init s2mu004_charger_init(void) |
| { |
| int ret = 0; |
| |
| ret = platform_driver_register(&s2mu004_charger_driver); |
| |
| return ret; |
| } |
| module_init(s2mu004_charger_init); |
| |
| static void __exit s2mu004_charger_exit(void) |
| { |
| platform_driver_unregister(&s2mu004_charger_driver); |
| } |
| module_exit(s2mu004_charger_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_DESCRIPTION("Charger driver for S2MU004"); |