Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 705ad8e..7bd4501 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -746,6 +746,12 @@
cpuidle.off=1 [CPU_IDLE]
disable the cpuidle sub-system
+ cpu_init_udelay=N
+ [X86] Delay for N microsec between assert and de-assert
+ of APIC INIT to start processors. This delay occurs
+ on every CPU online, such as boot, and resume from suspend.
+ Default: 10000
+
cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
diff --git a/Documentation/x86/entry_64.txt b/Documentation/x86/entry_64.txt
index 9132b86..33884d1 100644
--- a/Documentation/x86/entry_64.txt
+++ b/Documentation/x86/entry_64.txt
@@ -18,10 +18,10 @@
- system_call: syscall instruction from 64-bit code.
- - ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
+ - entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
either way.
- - ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
+ - entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
code
- interrupt: An array of entries. Every IDT vector that doesn't
diff --git a/Documentation/x86/mtrr.txt b/Documentation/x86/mtrr.txt
index cc071dc..860bc3a 100644
--- a/Documentation/x86/mtrr.txt
+++ b/Documentation/x86/mtrr.txt
@@ -1,7 +1,19 @@
MTRR (Memory Type Range Register) control
-3 Jun 1999
-Richard Gooch
-<rgooch@atnf.csiro.au>
+
+Richard Gooch <rgooch@atnf.csiro.au> - 3 Jun 1999
+Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
+
+===============================================================================
+Phasing out MTRR use
+
+MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
+of effective MTRR that is expected to be supported will be for write-combining.
+As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
+MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
+
+For details refer to Documentation/x86/pat.txt.
+
+===============================================================================
On Intel P6 family processors (Pentium Pro, Pentium II and later)
the Memory Type Range Registers (MTRRs) may be used to control
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
index cf08c9f..54944c7 100644
--- a/Documentation/x86/pat.txt
+++ b/Documentation/x86/pat.txt
@@ -12,7 +12,7 @@
PAT allows for different types of memory attributes. The most commonly used
ones that will be supported at this time are Write-back, Uncached,
-Write-combined and Uncached Minus.
+Write-combined, Write-through and Uncached Minus.
PAT APIs
@@ -34,16 +34,23 @@
| | | |
ioremap_cache | -- | WB | WB |
| | | |
+ioremap_uc | -- | UC | UC |
+ | | | |
ioremap_nocache | -- | UC- | UC- |
| | | |
ioremap_wc | -- | -- | WC |
| | | |
+ioremap_wt | -- | -- | WT |
+ | | | |
set_memory_uc | UC- | -- | -- |
set_memory_wb | | | |
| | | |
set_memory_wc | WC | -- | -- |
set_memory_wb | | | |
| | | |
+set_memory_wt | WT | -- | -- |
+ set_memory_wb | | | |
+ | | | |
pci sysfs resource | -- | -- | UC- |
| | | |
pci sysfs resource_wc | -- | -- | WC |
@@ -102,7 +109,38 @@
as step 0 above and also track the usage of those pages and use set_memory_wb()
before the page is freed to free pool.
+MTRR effects on PAT / non-PAT systems
+-------------------------------------
+The following table provides the effects of using write-combining MTRRs when
+using ioremap*() calls on x86 for both non-PAT and PAT systems. Ideally
+mtrr_add() usage will be phased out in favor of arch_phys_wc_add() which will
+be a no-op on PAT enabled systems. The region over which a arch_phys_wc_add()
+is made, should already have been ioremapped with WC attributes or PAT entries,
+this can be done by using ioremap_wc() / set_memory_wc(). Devices which
+combine areas of IO memory desired to remain uncacheable with areas where
+write-combining is desirable should consider use of ioremap_uc() followed by
+set_memory_wc() to white-list effective write-combined areas. Such use is
+nevertheless discouraged as the effective memory type is considered
+implementation defined, yet this strategy can be used as last resort on devices
+with size-constrained regions where otherwise MTRR write-combining would
+otherwise not be effective.
+
+----------------------------------------------------------------------
+MTRR Non-PAT PAT Linux ioremap value Effective memory type
+----------------------------------------------------------------------
+ Non-PAT | PAT
+ PAT
+ |PCD
+ ||PWT
+ |||
+WC 000 WB _PAGE_CACHE_MODE_WB WC | WC
+WC 001 WC _PAGE_CACHE_MODE_WC WC* | WC
+WC 010 UC- _PAGE_CACHE_MODE_UC_MINUS WC* | UC
+WC 011 UC _PAGE_CACHE_MODE_UC UC | UC
+----------------------------------------------------------------------
+
+(*) denotes implementation defined and is discouraged
Notes:
@@ -115,8 +153,8 @@
For example: If there is an existing uncached mapping, a new ioremap_wc can
return uncached mapping in place of write-combine requested.
-set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
-first make a region uc or wc and switch it back to wb after use.
+set_memory_[uc|wc|wt] and set_memory_wb should be used in pairs, where driver
+will first make a region uc, wc or wt and switch it back to wb after use.
Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
@@ -124,7 +162,7 @@
Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
types.
-Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+Drivers should use set_memory_[uc|wc|wt] to set access type for RAM ranges.
PAT debugging
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 5223479..68ed311 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -31,6 +31,9 @@
(e.g. BIOS or hardware monitoring applications), conflicting
with OS's error handling, and you cannot deactivate the agent,
then this option will be a help.
+ mce=no_lmce
+ Do not opt-in to Local MCE delivery. Use legacy method
+ to broadcast MCEs.
mce=bootlog
Enable logging of machine checks left over from booting.
Disabled by default on AMD because some BIOS leave bogus ones.
diff --git a/MAINTAINERS b/MAINTAINERS
index 4303a64..a655435 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10894,7 +10894,7 @@
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
S: Maintained
-F: arch/x86/vdso/
+F: arch/x86/entry/vdso/
XC2028/3028 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index cabd518..7cc4ced 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -20,6 +20,7 @@
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
#define ioremap_wc(phy, sz) ioremap(phy, sz)
+#define ioremap_wt(phy, sz) ioremap(phy, sz)
/* Change struct page to physical address */
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index db58deb..1b7677d 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -336,6 +336,7 @@
#define ioremap_nocache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_cache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
#define ioremap_wc(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_WC)
+#define ioremap_wt(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE)
#define iounmap __arm_iounmap
/*
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 540f7c0..7116d39 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -170,6 +170,7 @@
#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
+#define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define iounmap __iounmap
/*
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
index 4f5ec2b..e998ff5 100644
--- a/arch/avr32/include/asm/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -296,6 +296,7 @@
__iounmap(addr)
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)
diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h
index 0b78bc8..a31b63e 100644
--- a/arch/frv/include/asm/io.h
+++ b/arch/frv/include/asm/io.h
@@ -17,6 +17,8 @@
#ifdef __KERNEL__
+#define ARCH_HAS_IOREMAP_WT
+
#include <linux/types.h>
#include <asm/virtconvert.h>
#include <asm/string.h>
@@ -265,7 +267,7 @@
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+static inline void __iomem *ioremap_wt(unsigned long physaddr, unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
}
diff --git a/arch/ia64/include/asm/irq_remapping.h b/arch/ia64/include/asm/irq_remapping.h
index e3b3556..a8687b1 100644
--- a/arch/ia64/include/asm/irq_remapping.h
+++ b/arch/ia64/include/asm/irq_remapping.h
@@ -1,6 +1,4 @@
#ifndef __IA64_INTR_REMAPPING_H
#define __IA64_INTR_REMAPPING_H
#define irq_remapping_enabled 0
-#define dmar_alloc_hwirq create_irq
-#define dmar_free_hwirq destroy_irq
#endif
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 9dd7464..d70bf15 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -165,7 +165,7 @@
.irq_retrigger = ia64_msi_retrigger_irq,
};
-static int
+static void
msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
{
struct irq_cfg *cfg = irq_cfg + irq;
@@ -186,21 +186,29 @@
MSI_DATA_LEVEL_ASSERT |
MSI_DATA_DELIVERY_FIXED |
MSI_DATA_VECTOR(cfg->vector);
- return 0;
}
-int arch_setup_dmar_msi(unsigned int irq)
+int dmar_alloc_hwirq(int id, int node, void *arg)
{
- int ret;
+ int irq;
struct msi_msg msg;
- ret = msi_compose_msg(NULL, irq, &msg);
- if (ret < 0)
- return ret;
- dmar_msi_write(irq, &msg);
- irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
- "edge");
- return 0;
+ irq = create_irq();
+ if (irq > 0) {
+ irq_set_handler_data(irq, arg);
+ irq_set_chip_and_handler_name(irq, &dmar_msi_type,
+ handle_edge_irq, "edge");
+ msi_compose_msg(NULL, irq, &msg);
+ dmar_msi_write(irq, &msg);
+ }
+
+ return irq;
+}
+
+void dmar_free_hwirq(int irq)
+{
+ irq_set_handler_data(irq, NULL);
+ destroy_irq(irq);
}
#endif /* CONFIG_INTEL_IOMMU */
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index 9cc00db..0c3f25e 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -68,6 +68,7 @@
extern void iounmap(volatile void __iomem *addr);
#define ioremap_nocache(off,size) ioremap(off,size)
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
/*
* IO bus memory addresses are also 1:1 with the physical address
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 8955b40..618c85d3 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -20,6 +20,8 @@
#ifdef __KERNEL__
+#define ARCH_HAS_IOREMAP_WT
+
#include <linux/compiler.h>
#include <asm/raw_io.h>
#include <asm/virtconvert.h>
@@ -465,7 +467,7 @@
{
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
+static inline void __iomem *ioremap_wt(unsigned long physaddr,
unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index a93c8cd..ad7bd40 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -3,6 +3,8 @@
#ifdef __KERNEL__
+#define ARCH_HAS_IOREMAP_WT
+
#include <asm/virtconvert.h>
#include <asm-generic/iomap.h>
@@ -153,7 +155,7 @@
{
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+static inline void *ioremap_wt(unsigned long physaddr, unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
}
diff --git a/arch/metag/include/asm/io.h b/arch/metag/include/asm/io.h
index d5779b0..9890f21 100644
--- a/arch/metag/include/asm/io.h
+++ b/arch/metag/include/asm/io.h
@@ -160,6 +160,9 @@
#define ioremap_wc(offset, size) \
__ioremap((offset), (size), _PAGE_WR_COMBINE)
+#define ioremap_wt(offset, size) \
+ __ioremap((offset), (size), 0)
+
#define iounmap(addr) \
__iounmap(addr)
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 940f5fc..39b6315 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -39,10 +39,10 @@
extern void iounmap(void __iomem *addr);
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_fullcache(addr, size) ioremap((addr), (size))
#define ioremap_wc(addr, size) ioremap((addr), (size))
+#define ioremap_wt(addr, size) ioremap((addr), (size))
#endif /* CONFIG_MMU */
diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h
index cc4a2ba..07c5b4a 100644
--- a/arch/mn10300/include/asm/io.h
+++ b/arch/mn10300/include/asm/io.h
@@ -282,6 +282,7 @@
}
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
static inline void iounmap(void __iomem *addr)
{
diff --git a/arch/nios2/include/asm/io.h b/arch/nios2/include/asm/io.h
index 6e24d7c..c5a62da 100644
--- a/arch/nios2/include/asm/io.h
+++ b/arch/nios2/include/asm/io.h
@@ -46,6 +46,7 @@
}
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
/* Pages to physical address... */
#define page_to_phys(page) virt_to_phys(page_to_virt(page))
diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h
index 30fd5c8..cb5fdf3 100644
--- a/arch/s390/include/asm/io.h
+++ b/arch/s390/include/asm/io.h
@@ -29,6 +29,7 @@
#define ioremap_nocache(addr, size) ioremap(addr, size)
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
{
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 407ac14..57f26c3 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -129,6 +129,7 @@
void __iomem *ioremap(unsigned long offset, unsigned long size);
#define ioremap_nocache(X,Y) ioremap((X),(Y))
#define ioremap_wc(X,Y) ioremap((X),(Y))
+#define ioremap_wt(X,Y) ioremap((X),(Y))
void iounmap(volatile void __iomem *addr);
/* Create a virtual mapping cookie for an IO port range */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
index 50d4840..c32fa3f 100644
--- a/arch/sparc/include/asm/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
@@ -402,6 +402,7 @@
#define ioremap_nocache(X,Y) ioremap((X),(Y))
#define ioremap_wc(X,Y) ioremap((X),(Y))
+#define ioremap_wt(X,Y) ioremap((X),(Y))
static inline void iounmap(volatile void __iomem *addr)
{
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index 6ef4eca..dc61de1 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -54,7 +54,7 @@
#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
#define ioremap_wc(physaddr, size) ioremap(physaddr, size)
-#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
+#define ioremap_wt(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
#define mmiowb()
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 3942f74..1538562 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -1,3 +1,6 @@
+
+obj-y += entry/
+
obj-$(CONFIG_KVM) += kvm/
# Xen paravirtualization support
@@ -11,7 +14,7 @@
obj-y += mm/
obj-y += crypto/
-obj-y += vdso/
+
obj-$(CONFIG_IA32_EMULATION) += ia32/
obj-y += platform/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4e986e8..7e39f9b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -9,141 +9,141 @@
config X86_32
def_bool y
depends on !64BIT
- select CLKSRC_I8253
- select HAVE_UID16
config X86_64
def_bool y
depends on 64BIT
- select X86_DEV_DMA_OPS
- select ARCH_USE_CMPXCHG_LOCKREF
- select HAVE_LIVEPATCH
### Arch settings
config X86
def_bool y
- select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
- select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
+ select ACPI_LEGACY_TABLES_LOOKUP if ACPI
+ select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
+ select ANON_INODES
+ select ARCH_CLOCKSOURCE_DATA
+ select ARCH_DISCARD_MEMBLOCK
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+ select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_FAST_MULTIPLIER
select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_HAS_SG_CHAIN
+ select ARCH_HAVE_NMI_SAFE_CMPXCHG
+ select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
- select HAVE_AOUT if X86_32
- select HAVE_UNSTABLE_SCHED_CLOCK
- select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
- select ARCH_SUPPORTS_INT128 if X86_64
- select HAVE_IDE
- select HAVE_OPROFILE
- select HAVE_PCSPKR_PLATFORM
- select HAVE_PERF_EVENTS
- select HAVE_IOREMAP_PROT
- select HAVE_KPROBES
- select HAVE_MEMBLOCK
- select HAVE_MEMBLOCK_NODE_MAP
- select ARCH_DISCARD_MEMBLOCK
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_SUPPORTS_ATOMIC_RMW
+ select ARCH_SUPPORTS_INT128 if X86_64
+ select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
+ select ARCH_USE_BUILTIN_BSWAP
+ select ARCH_USE_CMPXCHG_LOCKREF if X86_64
+ select ARCH_USE_QUEUED_RWLOCKS
+ select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_WANT_FRAME_POINTERS
+ select ARCH_WANT_IPC_PARSE_VERSION if X86_32
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select BUILDTIME_EXTABLE_SORT
+ select CLKEVT_I8253
+ select CLKSRC_I8253 if X86_32
+ select CLOCKSOURCE_VALIDATE_LAST_CYCLE
+ select CLOCKSOURCE_WATCHDOG
+ select CLONE_BACKWARDS if X86_32
+ select COMPAT_OLD_SIGACTION if IA32_EMULATION
+ select DCACHE_WORD_ACCESS
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
+ select GENERIC_CLOCKEVENTS_MIN_ADJUST
+ select GENERIC_CMOS_UPDATE
+ select GENERIC_CPU_AUTOPROBE
+ select GENERIC_EARLY_IOREMAP
+ select GENERIC_FIND_FIRST_BIT
+ select GENERIC_IOMAP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PENDING_IRQ if SMP
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select GENERIC_TIME_VSYSCALL
+ select HAVE_ACPI_APEI if ACPI
+ select HAVE_ACPI_APEI_NMI if ACPI
+ select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+ select HAVE_AOUT if X86_32
+ select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_ARCH_HUGE_VMAP if X86_64 || X86_PAE
+ select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_KMEMCHECK
+ select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_SOFT_DIRTY if X86_64
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_BPF_JIT if X86_64
+ select HAVE_CC_STACKPROTECTOR
+ select HAVE_CMPXCHG_DOUBLE
+ select HAVE_CMPXCHG_LOCAL
+ select HAVE_CONTEXT_TRACKING if X86_64
+ select HAVE_C_RECORDMCOUNT
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS
- select HAVE_KRETPROBES
- select GENERIC_EARLY_IOREMAP
- select HAVE_OPTPROBES
- select HAVE_KPROBES_ON_FTRACE
- select HAVE_FTRACE_MCOUNT_RECORD
- select HAVE_FENTRY if X86_64
- select HAVE_C_RECORDMCOUNT
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS
- select HAVE_FUNCTION_TRACER
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_FUNCTION_GRAPH_FP_TEST
- select HAVE_SYSCALL_TRACEPOINTS
- select SYSCTL_EXCEPTION_TRACE
- select HAVE_KVM
- select HAVE_ARCH_KGDB
- select HAVE_ARCH_TRACEHOOK
- select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
- select USER_STACKTRACE_SUPPORT
- select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_DMA_API_DEBUG
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_BZIP2
- select HAVE_KERNEL_LZMA
- select HAVE_KERNEL_XZ
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_LZ4
+ select HAVE_FENTRY if X86_64
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_FP_TEST
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
+ select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_HW_BREAKPOINT
+ select HAVE_IDE
+ select HAVE_IOREMAP_PROT
+ select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
+ select HAVE_IRQ_TIME_ACCOUNTING
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZ4
+ select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_XZ
+ select HAVE_KPROBES
+ select HAVE_KPROBES_ON_FTRACE
+ select HAVE_KRETPROBES
+ select HAVE_KVM
+ select HAVE_LIVEPATCH if X86_64
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MIXED_BREAKPOINTS_REGS
- select PERF_EVENTS
+ select HAVE_OPROFILE
+ select HAVE_OPTPROBES
+ select HAVE_PCSPKR_PLATFORM
+ select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
- select HAVE_DEBUG_KMEMLEAK
- select ANON_INODES
- select HAVE_ALIGNED_STRUCT_PAGE if SLUB
- select HAVE_CMPXCHG_LOCAL
- select HAVE_CMPXCHG_DOUBLE
- select HAVE_ARCH_KMEMCHECK
- select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP
+ select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_UID16 if X86_32
+ select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_USER_RETURN_NOTIFIER
- select ARCH_HAS_ELF_RANDOMIZE
- select HAVE_ARCH_JUMP_LABEL
- select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select SPARSE_IRQ
- select GENERIC_FIND_FIRST_BIT
- select GENERIC_IRQ_PROBE
- select GENERIC_PENDING_IRQ if SMP
- select GENERIC_IRQ_SHOW
- select GENERIC_CLOCKEVENTS_MIN_ADJUST
select IRQ_FORCED_THREADING
- select HAVE_BPF_JIT if X86_64
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE
- select HAVE_ARCH_HUGE_VMAP if X86_64 || (X86_32 && X86_PAE)
- select ARCH_HAS_SG_CHAIN
- select CLKEVT_I8253
- select ARCH_HAVE_NMI_SAFE_CMPXCHG
- select GENERIC_IOMAP
- select DCACHE_WORD_ACCESS
- select GENERIC_SMP_IDLE_THREAD
- select ARCH_WANT_IPC_PARSE_VERSION if X86_32
- select HAVE_ARCH_SECCOMP_FILTER
- select BUILDTIME_EXTABLE_SORT
- select GENERIC_CMOS_UPDATE
- select HAVE_ARCH_SOFT_DIRTY if X86_64
- select CLOCKSOURCE_WATCHDOG
- select GENERIC_CLOCKEVENTS
- select ARCH_CLOCKSOURCE_DATA
- select CLOCKSOURCE_VALIDATE_LAST_CYCLE
- select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
- select GENERIC_TIME_VSYSCALL
- select GENERIC_STRNCPY_FROM_USER
- select GENERIC_STRNLEN_USER
- select HAVE_CONTEXT_TRACKING if X86_64
- select HAVE_IRQ_TIME_ACCOUNTING
- select VIRT_TO_BUS
- select MODULES_USE_ELF_REL if X86_32
- select MODULES_USE_ELF_RELA if X86_64
- select CLONE_BACKWARDS if X86_32
- select ARCH_USE_BUILTIN_BSWAP
- select ARCH_USE_QUEUED_SPINLOCKS
- select ARCH_USE_QUEUED_RWLOCKS
- select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
- select OLD_SIGACTION if X86_32
- select COMPAT_OLD_SIGACTION if IA32_EMULATION
+ select MODULES_USE_ELF_RELA if X86_64
+ select MODULES_USE_ELF_REL if X86_32
+ select OLD_SIGACTION if X86_32
+ select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
+ select PERF_EVENTS
select RTC_LIB
- select HAVE_DEBUG_STACKOVERFLOW
- select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
- select HAVE_CC_STACKPROTECTOR
- select GENERIC_CPU_AUTOPROBE
- select HAVE_ARCH_AUDITSYSCALL
- select ARCH_SUPPORTS_ATOMIC_RMW
- select HAVE_ACPI_APEI if ACPI
- select HAVE_ACPI_APEI_NMI if ACPI
- select ACPI_LEGACY_TABLES_LOOKUP if ACPI
- select X86_FEATURE_NAMES if PROC_FS
+ select SPARSE_IRQ
select SRCU
+ select SYSCTL_EXCEPTION_TRACE
+ select USER_STACKTRACE_SUPPORT
+ select VIRT_TO_BUS
+ select X86_DEV_DMA_OPS if X86_64
+ select X86_FEATURE_NAMES if PROC_FS
config INSTRUCTION_DECODER
def_bool y
@@ -261,10 +261,6 @@
def_bool y
depends on X86_64 && SMP
-config X86_HT
- def_bool y
- depends on SMP
-
config X86_32_LAZY_GS
def_bool y
depends on X86_32 && !CC_STACKPROTECTOR
@@ -342,7 +338,7 @@
config X86_X2APIC
bool "Support x2apic"
- depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP
+ depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
---help---
This enables x2apic support on CPUs that have this feature.
@@ -442,6 +438,7 @@
depends on X86_EXTENDED_PLATFORM
depends on NUMA
depends on X86_X2APIC
+ depends on PCI
---help---
This option is needed in order to support SGI Ultraviolet systems.
If you don't have one of these, you should say N here.
@@ -467,7 +464,6 @@
select X86_REBOOTFIXUPS
select OF
select OF_EARLY_FLATTREE
- select IRQ_DOMAIN
---help---
Select for the Intel CE media processor (CE4100) SOC.
This option compiles in support for the CE4100 SOC for settop
@@ -852,11 +848,12 @@
default "1" if !SMP
default "8192" if MAXSMP
default "32" if SMP && X86_BIGSMP
- default "8" if SMP
+ default "8" if SMP && X86_32
+ default "64" if SMP
---help---
This allows you to specify the maximum number of CPUs which this
kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum
- supported value is 4096, otherwise the maximum value is 512. The
+ supported value is 8192, otherwise the maximum value is 512. The
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
@@ -864,7 +861,7 @@
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on X86_HT
+ depends on SMP
---help---
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -874,7 +871,7 @@
config SCHED_MC
def_bool y
prompt "Multi-core scheduler support"
- depends on X86_HT
+ depends on SMP
---help---
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
@@ -915,12 +912,12 @@
config X86_LOCAL_APIC
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
- select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
+ select IRQ_DOMAIN_HIERARCHY
+ select PCI_MSI_IRQ_DOMAIN if PCI_MSI
config X86_IO_APIC
def_bool y
depends on X86_LOCAL_APIC || X86_UP_IOAPIC
- select IRQ_DOMAIN
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
bool "Reroute for broken boot IRQs"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 2fd3ebb..a15893d 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -344,4 +344,15 @@
If unsure, say N.
+config PUNIT_ATOM_DEBUG
+ tristate "ATOM Punit debug driver"
+ select DEBUG_FS
+ select IOSF_MBI
+ ---help---
+ This is a debug driver, which gets the power states
+ of all Punit North Complex devices. The power states of
+ each device is exposed as part of the debugfs interface.
+ The current power state can be read from
+ /sys/kernel/debug/punit_atom/dev_power_state
+
endmenu
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 2fda005..118e6de 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -77,6 +77,12 @@
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
+ # Align jump targets to 1 byte, not the default 16 bytes:
+ KBUILD_CFLAGS += -falign-jumps=1
+
+ # Pack loops tightly as well:
+ KBUILD_CFLAGS += -falign-loops=1
+
# Don't autogenerate traditional x87 instructions
KBUILD_CFLAGS += $(call cc-option,-mno-80387)
KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
@@ -84,6 +90,9 @@
# Use -mpreferred-stack-boundary=3 if supported.
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
+ # Use -mskip-rax-setup if supported.
+ KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
+
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
@@ -140,12 +149,6 @@
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
# does binutils support specific instructions?
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
@@ -153,8 +156,8 @@
avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
LDFLAGS := -m elf_$(UTS_MACHINE)
@@ -178,7 +181,7 @@
# Syscall table generation
archheaders:
- $(Q)$(MAKE) $(build)=arch/x86/syscalls all
+ $(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
archprepare:
ifeq ($(CONFIG_KEXEC_FILE),y)
@@ -241,7 +244,7 @@
PHONY += vdso_install
vdso_install:
- $(Q)$(MAKE) $(build)=arch/x86/vdso $@
+ $(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile
new file mode 100644
index 0000000..7a14497
--- /dev/null
+++ b/arch/x86/entry/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the x86 low level entry code
+#
+obj-y := entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
+
+obj-y += vdso/
+obj-y += vsyscall/
+
+obj-$(CONFIG_IA32_EMULATION) += entry_64_compat.o syscall_32.o
+
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/entry/calling.h
similarity index 80%
rename from arch/x86/include/asm/calling.h
rename to arch/x86/entry/calling.h
index 1c8b50e..f4e6308 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/entry/calling.h
@@ -46,8 +46,6 @@
*/
-#include <asm/dwarf2.h>
-
#ifdef CONFIG_X86_64
/*
@@ -91,28 +89,27 @@
#define SIZEOF_PTREGS 21*8
.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
- subq $15*8+\addskip, %rsp
- CFI_ADJUST_CFA_OFFSET 15*8+\addskip
+ addq $-(15*8+\addskip), %rsp
.endm
.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
.if \r11
- movq_cfi r11, 6*8+\offset
+ movq %r11, 6*8+\offset(%rsp)
.endif
.if \r8910
- movq_cfi r10, 7*8+\offset
- movq_cfi r9, 8*8+\offset
- movq_cfi r8, 9*8+\offset
+ movq %r10, 7*8+\offset(%rsp)
+ movq %r9, 8*8+\offset(%rsp)
+ movq %r8, 9*8+\offset(%rsp)
.endif
.if \rax
- movq_cfi rax, 10*8+\offset
+ movq %rax, 10*8+\offset(%rsp)
.endif
.if \rcx
- movq_cfi rcx, 11*8+\offset
+ movq %rcx, 11*8+\offset(%rsp)
.endif
- movq_cfi rdx, 12*8+\offset
- movq_cfi rsi, 13*8+\offset
- movq_cfi rdi, 14*8+\offset
+ movq %rdx, 12*8+\offset(%rsp)
+ movq %rsi, 13*8+\offset(%rsp)
+ movq %rdi, 14*8+\offset(%rsp)
.endm
.macro SAVE_C_REGS offset=0
SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
@@ -131,24 +128,24 @@
.endm
.macro SAVE_EXTRA_REGS offset=0
- movq_cfi r15, 0*8+\offset
- movq_cfi r14, 1*8+\offset
- movq_cfi r13, 2*8+\offset
- movq_cfi r12, 3*8+\offset
- movq_cfi rbp, 4*8+\offset
- movq_cfi rbx, 5*8+\offset
+ movq %r15, 0*8+\offset(%rsp)
+ movq %r14, 1*8+\offset(%rsp)
+ movq %r13, 2*8+\offset(%rsp)
+ movq %r12, 3*8+\offset(%rsp)
+ movq %rbp, 4*8+\offset(%rsp)
+ movq %rbx, 5*8+\offset(%rsp)
.endm
.macro SAVE_EXTRA_REGS_RBP offset=0
- movq_cfi rbp, 4*8+\offset
+ movq %rbp, 4*8+\offset(%rsp)
.endm
.macro RESTORE_EXTRA_REGS offset=0
- movq_cfi_restore 0*8+\offset, r15
- movq_cfi_restore 1*8+\offset, r14
- movq_cfi_restore 2*8+\offset, r13
- movq_cfi_restore 3*8+\offset, r12
- movq_cfi_restore 4*8+\offset, rbp
- movq_cfi_restore 5*8+\offset, rbx
+ movq 0*8+\offset(%rsp), %r15
+ movq 1*8+\offset(%rsp), %r14
+ movq 2*8+\offset(%rsp), %r13
+ movq 3*8+\offset(%rsp), %r12
+ movq 4*8+\offset(%rsp), %rbp
+ movq 5*8+\offset(%rsp), %rbx
.endm
.macro ZERO_EXTRA_REGS
@@ -162,24 +159,24 @@
.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
.if \rstor_r11
- movq_cfi_restore 6*8, r11
+ movq 6*8(%rsp), %r11
.endif
.if \rstor_r8910
- movq_cfi_restore 7*8, r10
- movq_cfi_restore 8*8, r9
- movq_cfi_restore 9*8, r8
+ movq 7*8(%rsp), %r10
+ movq 8*8(%rsp), %r9
+ movq 9*8(%rsp), %r8
.endif
.if \rstor_rax
- movq_cfi_restore 10*8, rax
+ movq 10*8(%rsp), %rax
.endif
.if \rstor_rcx
- movq_cfi_restore 11*8, rcx
+ movq 11*8(%rsp), %rcx
.endif
.if \rstor_rdx
- movq_cfi_restore 12*8, rdx
+ movq 12*8(%rsp), %rdx
.endif
- movq_cfi_restore 13*8, rsi
- movq_cfi_restore 14*8, rdi
+ movq 13*8(%rsp), %rsi
+ movq 14*8(%rsp), %rdi
.endm
.macro RESTORE_C_REGS
RESTORE_C_REGS_HELPER 1,1,1,1,1
@@ -204,8 +201,7 @@
.endm
.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
- addq $15*8+\addskip, %rsp
- CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
+ subq $-(15*8+\addskip), %rsp
.endm
.macro icebp
@@ -224,23 +220,23 @@
*/
.macro SAVE_ALL
- pushl_cfi_reg eax
- pushl_cfi_reg ebp
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg edx
- pushl_cfi_reg ecx
- pushl_cfi_reg ebx
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
.endm
.macro RESTORE_ALL
- popl_cfi_reg ebx
- popl_cfi_reg ecx
- popl_cfi_reg edx
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi_reg ebp
- popl_cfi_reg eax
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
.endm
#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
new file mode 100644
index 0000000..21dc60a
--- /dev/null
+++ b/arch/x86/entry/entry_32.S
@@ -0,0 +1,1248 @@
+/*
+ * Copyright (C) 1991,1992 Linus Torvalds
+ *
+ * entry_32.S contains the system-call and low-level fault and trap handling routines.
+ *
+ * Stack layout in 'syscall_exit':
+ * ptrace needs to have all registers on the stack.
+ * If the order here is changed, it needs to be
+ * updated in fork.c:copy_process(), signal.c:do_signal(),
+ * ptrace.c and ptrace.h
+ *
+ * 0(%esp) - %ebx
+ * 4(%esp) - %ecx
+ * 8(%esp) - %edx
+ * C(%esp) - %esi
+ * 10(%esp) - %edi
+ * 14(%esp) - %ebp
+ * 18(%esp) - %eax
+ * 1C(%esp) - %ds
+ * 20(%esp) - %es
+ * 24(%esp) - %fs
+ * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS
+ * 2C(%esp) - orig_eax
+ * 30(%esp) - %eip
+ * 34(%esp) - %cs
+ * 38(%esp) - %eflags
+ * 3C(%esp) - %oldesp
+ * 40(%esp) - %oldss
+ */
+
+#include <linux/linkage.h>
+#include <linux/err.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page_types.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/ftrace.h>
+#include <asm/irq_vectors.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE 0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+# define sysenter_audit syscall_trace_entry
+# define sysexit_audit syscall_exit_work
+#endif
+
+ .section .entry.text, "ax"
+
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization. The following will never clobber any registers:
+ * INTERRUPT_RETURN (aka. "iret")
+ * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
+
+#ifdef CONFIG_PREEMPT
+# define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+#else
+# define preempt_stop(clobbers)
+# define resume_kernel restore_all
+#endif
+
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+/*
+ * User gs save/restore
+ *
+ * %gs is used for userland TLS and kernel only uses it for stack
+ * canary which is required to be at %gs:20 by gcc. Read the comment
+ * at the top of stackprotector.h for more info.
+ *
+ * Local labels 98 and 99 are used.
+ */
+#ifdef CONFIG_X86_32_LAZY_GS
+
+ /* unfortunately push/pop can't be no-op */
+.macro PUSH_GS
+ pushl $0
+.endm
+.macro POP_GS pop=0
+ addl $(4 + \pop), %esp
+.endm
+.macro POP_GS_EX
+.endm
+
+ /* all the rest are no-op */
+.macro PTGS_TO_GS
+.endm
+.macro PTGS_TO_GS_EX
+.endm
+.macro GS_TO_REG reg
+.endm
+.macro REG_TO_PTGS reg
+.endm
+.macro SET_KERNEL_GS reg
+.endm
+
+#else /* CONFIG_X86_32_LAZY_GS */
+
+.macro PUSH_GS
+ pushl %gs
+.endm
+
+.macro POP_GS pop=0
+98: popl %gs
+ .if \pop <> 0
+ add $\pop, %esp
+ .endif
+.endm
+.macro POP_GS_EX
+.pushsection .fixup, "ax"
+99: movl $0, (%esp)
+ jmp 98b
+.popsection
+ _ASM_EXTABLE(98b, 99b)
+.endm
+
+.macro PTGS_TO_GS
+98: mov PT_GS(%esp), %gs
+.endm
+.macro PTGS_TO_GS_EX
+.pushsection .fixup, "ax"
+99: movl $0, PT_GS(%esp)
+ jmp 98b
+.popsection
+ _ASM_EXTABLE(98b, 99b)
+.endm
+
+.macro GS_TO_REG reg
+ movl %gs, \reg
+.endm
+.macro REG_TO_PTGS reg
+ movl \reg, PT_GS(%esp)
+.endm
+.macro SET_KERNEL_GS reg
+ movl $(__KERNEL_STACK_CANARY), \reg
+ movl \reg, %gs
+.endm
+
+#endif /* CONFIG_X86_32_LAZY_GS */
+
+.macro SAVE_ALL
+ cld
+ PUSH_GS
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+ movl $(__USER_DS), %edx
+ movl %edx, %ds
+ movl %edx, %es
+ movl $(__KERNEL_PERCPU), %edx
+ movl %edx, %fs
+ SET_KERNEL_GS %edx
+.endm
+
+.macro RESTORE_INT_REGS
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
+.endm
+
+.macro RESTORE_REGS pop=0
+ RESTORE_INT_REGS
+1: popl %ds
+2: popl %es
+3: popl %fs
+ POP_GS \pop
+.pushsection .fixup, "ax"
+4: movl $0, (%esp)
+ jmp 1b
+5: movl $0, (%esp)
+ jmp 2b
+6: movl $0, (%esp)
+ jmp 3b
+.popsection
+ _ASM_EXTABLE(1b, 4b)
+ _ASM_EXTABLE(2b, 5b)
+ _ASM_EXTABLE(3b, 6b)
+ POP_GS_EX
+.endm
+
+ENTRY(ret_from_fork)
+ pushl %eax
+ call schedule_tail
+ GET_THREAD_INFO(%ebp)
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
+ popfl
+ jmp syscall_exit
+END(ret_from_fork)
+
+ENTRY(ret_from_kernel_thread)
+ pushl %eax
+ call schedule_tail
+ GET_THREAD_INFO(%ebp)
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
+ popfl
+ movl PT_EBP(%esp), %eax
+ call *PT_EBX(%esp)
+ movl $0, PT_EAX(%esp)
+ jmp syscall_exit
+ENDPROC(ret_from_kernel_thread)
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+ # userspace resumption stub bypassing syscall exit tracing
+ ALIGN
+ret_from_exception:
+ preempt_stop(CLBR_ANY)
+ret_from_intr:
+ GET_THREAD_INFO(%ebp)
+#ifdef CONFIG_VM86
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb PT_CS(%esp), %al
+ andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+#else
+ /*
+ * We can be coming here from child spawned by kernel_thread().
+ */
+ movl PT_CS(%esp), %eax
+ andl $SEGMENT_RPL_MASK, %eax
+#endif
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
+
+ENTRY(resume_userspace)
+ LOCKDEP_SYS_EXIT
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
+ # int/exception return?
+ jne work_pending
+ jmp restore_all
+END(ret_from_exception)
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ DISABLE_INTERRUPTS(CLBR_ANY)
+need_resched:
+ cmpl $0, PER_CPU_VAR(__preempt_count)
+ jnz restore_all
+ testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off (exception path) ?
+ jz restore_all
+ call preempt_schedule_irq
+ jmp need_resched
+END(resume_kernel)
+#endif
+
+/*
+ * SYSENTER_RETURN points to after the SYSENTER instruction
+ * in the vsyscall page. See vsyscall-sysentry.S, which defines
+ * the symbol.
+ */
+
+ # SYSENTER call handler stub
+ENTRY(entry_SYSENTER_32)
+ movl TSS_sysenter_sp0(%esp), %esp
+sysenter_past_esp:
+ /*
+ * Interrupts are disabled here, but we can't trace it until
+ * enough kernel state to call TRACE_IRQS_OFF can be called - but
+ * we immediately enable interrupts at that point anyway.
+ */
+ pushl $__USER_DS
+ pushl %ebp
+ pushfl
+ orl $X86_EFLAGS_IF, (%esp)
+ pushl $__USER_CS
+ /*
+ * Push current_thread_info()->sysenter_return to the stack.
+ * A tiny bit of offset fixup is necessary: TI_sysenter_return
+ * is relative to thread_info, which is at the bottom of the
+ * kernel stack page. 4*4 means the 4 words pushed above;
+ * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
+ * and THREAD_SIZE takes us to the bottom.
+ */
+ pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
+
+ pushl %eax
+ SAVE_ALL
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+ cmpl $__PAGE_OFFSET-3, %ebp
+ jae syscall_fault
+ ASM_STAC
+1: movl (%ebp), %ebp
+ ASM_CLAC
+ movl %ebp, PT_EBP(%esp)
+ _ASM_EXTABLE(1b, syscall_fault)
+
+ GET_THREAD_INFO(%ebp)
+
+ testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+ jnz sysenter_audit
+sysenter_do_call:
+ cmpl $(NR_syscalls), %eax
+ jae sysenter_badsys
+ call *sys_call_table(, %eax, 4)
+sysenter_after_call:
+ movl %eax, PT_EAX(%esp)
+ LOCKDEP_SYS_EXIT
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ testl $_TIF_ALLWORK_MASK, %ecx
+ jnz sysexit_audit
+sysenter_exit:
+/* if something modifies registers it must also disable sysexit */
+ movl PT_EIP(%esp), %edx
+ movl PT_OLDESP(%esp), %ecx
+ xorl %ebp, %ebp
+ TRACE_IRQS_ON
+1: mov PT_FS(%esp), %fs
+ PTGS_TO_GS
+ ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), TI_flags(%ebp)
+ jnz syscall_trace_entry
+ /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
+ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+ pushl PT_ESI(%esp) /* a3: 5th arg */
+ pushl PT_EDX+4(%esp) /* a2: 4th arg */
+ call __audit_syscall_entry
+ popl %ecx /* get that remapped edx off the stack */
+ popl %ecx /* get that remapped esi off the stack */
+ movl PT_EAX(%esp), %eax /* reload syscall number */
+ jmp sysenter_do_call
+
+sysexit_audit:
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+ jnz syscall_exit_work
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_ANY)
+ movl %eax, %edx /* second arg, syscall return value */
+ cmpl $-MAX_ERRNO, %eax /* is it an error ? */
+ setbe %al /* 1 if so, 0 if not */
+ movzbl %al, %eax /* zero-extend that */
+ call __audit_syscall_exit
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+ jnz syscall_exit_work
+ movl PT_EAX(%esp), %eax /* reload syscall return value */
+ jmp sysenter_exit
+#endif
+
+.pushsection .fixup, "ax"
+2: movl $0, PT_FS(%esp)
+ jmp 1b
+.popsection
+ _ASM_EXTABLE(1b, 2b)
+ PTGS_TO_GS_EX
+ENDPROC(entry_SYSENTER_32)
+
+ # system call handler stub
+ENTRY(entry_INT80_32)
+ ASM_CLAC
+ pushl %eax # save orig_eax
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+ # system call tracing in operation / emulation
+ testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(NR_syscalls), %eax
+ jae syscall_badsys
+syscall_call:
+ call *sys_call_table(, %eax, 4)
+syscall_after_call:
+ movl %eax, PT_EAX(%esp) # store the return value
+syscall_exit:
+ LOCKDEP_SYS_EXIT
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ testl $_TIF_ALLWORK_MASK, %ecx # current->work
+ jnz syscall_exit_work
+
+restore_all:
+ TRACE_IRQS_IRET
+restore_all_notrace:
+#ifdef CONFIG_X86_ESPFIX32
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ /*
+ * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+ * are returning to the kernel.
+ * See comments in process.c:copy_thread() for details.
+ */
+ movb PT_OLDSS(%esp), %ah
+ movb PT_CS(%esp), %al
+ andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+ je ldt_ss # returning to user-space with LDT SS
+#endif
+restore_nocheck:
+ RESTORE_REGS 4 # skip orig_eax/error_code
+irq_return:
+ INTERRUPT_RETURN
+.section .fixup, "ax"
+ENTRY(iret_exc )
+ pushl $0 # no error code
+ pushl $do_iret_error
+ jmp error_code
+.previous
+ _ASM_EXTABLE(irq_return, iret_exc)
+
+#ifdef CONFIG_X86_ESPFIX32
+ldt_ss:
+#ifdef CONFIG_PARAVIRT
+ /*
+ * The kernel can't run on a non-flat stack if paravirt mode
+ * is active. Rather than try to fixup the high bits of
+ * ESP, bypass this code entirely. This may break DOSemu
+ * and/or Wine support in a paravirt VM, although the option
+ * is still available to implement the setting of the high
+ * 16-bits in the INTERRUPT_RETURN paravirt-op.
+ */
+ cmpl $0, pv_info+PARAVIRT_enabled
+ jne restore_nocheck
+#endif
+
+/*
+ * Setup and switch to ESPFIX stack
+ *
+ * We're returning to userspace with a 16 bit stack. The CPU will not
+ * restore the high word of ESP for us on executing iret... This is an
+ * "official" bug of all the x86-compatible CPUs, which we can work
+ * around to make dosemu and wine happy. We do this by preloading the
+ * high word of ESP with the high word of the userspace ESP while
+ * compensating for the offset by changing to the ESPFIX segment with
+ * a base address that matches for the difference.
+ */
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+ mov %esp, %edx /* load kernel esp */
+ mov PT_OLDESP(%esp), %eax /* load userspace esp */
+ mov %dx, %ax /* eax: new kernel esp */
+ sub %eax, %edx /* offset (low word is 0) */
+ shr $16, %edx
+ mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
+ mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
+ pushl $__ESPFIX_SS
+ pushl %eax /* new kernel esp */
+ /*
+ * Disable interrupts, but do not irqtrace this section: we
+ * will soon execute iret and the tracer was already set to
+ * the irqstate after the IRET:
+ */
+ DISABLE_INTERRUPTS(CLBR_EAX)
+ lss (%esp), %esp /* switch to espfix segment */
+ jmp restore_nocheck
+#endif
+ENDPROC(entry_INT80_32)
+
+ # perform work that needs to be done immediately before resumption
+ ALIGN
+work_pending:
+ testb $_TIF_NEED_RESCHED, %cl
+ jz work_notifysig
+work_resched:
+ call schedule
+ LOCKDEP_SYS_EXIT
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
+ # than syscall tracing?
+ jz restore_all
+ testb $_TIF_NEED_RESCHED, %cl
+ jnz work_resched
+
+work_notifysig: # deal with pending signals and
+ # notify-resume requests
+#ifdef CONFIG_VM86
+ testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
+ movl %esp, %eax
+ jnz work_notifysig_v86 # returning to kernel-space or
+ # vm86-space
+1:
+#else
+ movl %esp, %eax
+#endif
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ movb PT_CS(%esp), %bl
+ andb $SEGMENT_RPL_MASK, %bl
+ cmpb $USER_RPL, %bl
+ jb resume_kernel
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp resume_userspace
+
+#ifdef CONFIG_VM86
+ ALIGN
+work_notifysig_v86:
+ pushl %ecx # save ti_flags for do_notify_resume
+ call save_v86_state # %eax contains pt_regs pointer
+ popl %ecx
+ movl %eax, %esp
+ jmp 1b
+#endif
+END(work_pending)
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_trace_entry:
+ movl $-ENOSYS, PT_EAX(%esp)
+ movl %esp, %eax
+ call syscall_trace_enter
+ /* What it returned is what we'll actually use. */
+ cmpl $(NR_syscalls), %eax
+ jnae syscall_call
+ jmp syscall_exit
+END(syscall_trace_entry)
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_exit_work:
+ testl $_TIF_WORK_SYSCALL_EXIT, %ecx
+ jz work_pending
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call
+ # schedule() instead
+ movl %esp, %eax
+ call syscall_trace_leave
+ jmp resume_userspace
+END(syscall_exit_work)
+
+syscall_fault:
+ ASM_CLAC
+ GET_THREAD_INFO(%ebp)
+ movl $-EFAULT, PT_EAX(%esp)
+ jmp resume_userspace
+END(syscall_fault)
+
+syscall_badsys:
+ movl $-ENOSYS, %eax
+ jmp syscall_after_call
+END(syscall_badsys)
+
+sysenter_badsys:
+ movl $-ENOSYS, %eax
+ jmp sysenter_after_call
+END(sysenter_badsys)
+
+.macro FIXUP_ESPFIX_STACK
+/*
+ * Switch back for ESPFIX stack to the normal zerobased stack
+ *
+ * We can't call C functions using the ESPFIX stack. This code reads
+ * the high word of the segment base from the GDT and swiches to the
+ * normal stack and adjusts ESP with the matching offset.
+ */
+#ifdef CONFIG_X86_ESPFIX32
+ /* fixup the stack */
+ mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
+ mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+ shl $16, %eax
+ addl %esp, %eax /* the adjusted stack pointer */
+ pushl $__KERNEL_DS
+ pushl %eax
+ lss (%esp), %esp /* switch to the normal stack segment */
+#endif
+.endm
+.macro UNWIND_ESPFIX_STACK
+#ifdef CONFIG_X86_ESPFIX32
+ movl %ss, %eax
+ /* see if on espfix stack */
+ cmpw $__ESPFIX_SS, %ax
+ jne 27f
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ /* switch to normal stack */
+ FIXUP_ESPFIX_STACK
+27:
+#endif
+.endm
+
+/*
+ * Build the entry stubs with some assembler magic.
+ * We pack 1 stub into every 8-byte block.
+ */
+ .align 8
+ENTRY(irq_entries_start)
+ vector=FIRST_EXTERNAL_VECTOR
+ .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
+ pushl $(~vector+0x80) /* Note: always in signed byte range */
+ vector=vector+1
+ jmp common_interrupt
+ .align 8
+ .endr
+END(irq_entries_start)
+
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
+ ASM_CLAC
+ addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ movl %esp, %eax
+ call do_IRQ
+ jmp ret_from_intr
+ENDPROC(common_interrupt)
+
+#define BUILD_INTERRUPT3(name, nr, fn) \
+ENTRY(name) \
+ ASM_CLAC; \
+ pushl $~(nr); \
+ SAVE_ALL; \
+ TRACE_IRQS_OFF \
+ movl %esp, %eax; \
+ call fn; \
+ jmp ret_from_intr; \
+ENDPROC(name)
+
+
+#ifdef CONFIG_TRACING
+# define TRACE_BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
+#else
+# define TRACE_BUILD_INTERRUPT(name, nr)
+#endif
+
+#define BUILD_INTERRUPT(name, nr) \
+ BUILD_INTERRUPT3(name, nr, smp_##name); \
+ TRACE_BUILD_INTERRUPT(name, nr)
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include <asm/entry_arch.h>
+
+ENTRY(coprocessor_error)
+ ASM_CLAC
+ pushl $0
+ pushl $do_coprocessor_error
+ jmp error_code
+END(coprocessor_error)
+
+ENTRY(simd_coprocessor_error)
+ ASM_CLAC
+ pushl $0
+#ifdef CONFIG_X86_INVD_BUG
+ /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
+ ALTERNATIVE "pushl $do_general_protection", \
+ "pushl $do_simd_coprocessor_error", \
+ X86_FEATURE_XMM
+#else
+ pushl $do_simd_coprocessor_error
+#endif
+ jmp error_code
+END(simd_coprocessor_error)
+
+ENTRY(device_not_available)
+ ASM_CLAC
+ pushl $-1 # mark this as an int
+ pushl $do_device_not_available
+ jmp error_code
+END(device_not_available)
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
+ iret
+ _ASM_EXTABLE(native_iret, iret_exc)
+END(native_iret)
+
+ENTRY(native_irq_enable_sysexit)
+ sti
+ sysexit
+END(native_irq_enable_sysexit)
+#endif
+
+ENTRY(overflow)
+ ASM_CLAC
+ pushl $0
+ pushl $do_overflow
+ jmp error_code
+END(overflow)
+
+ENTRY(bounds)
+ ASM_CLAC
+ pushl $0
+ pushl $do_bounds
+ jmp error_code
+END(bounds)
+
+ENTRY(invalid_op)
+ ASM_CLAC
+ pushl $0
+ pushl $do_invalid_op
+ jmp error_code
+END(invalid_op)
+
+ENTRY(coprocessor_segment_overrun)
+ ASM_CLAC
+ pushl $0
+ pushl $do_coprocessor_segment_overrun
+ jmp error_code
+END(coprocessor_segment_overrun)
+
+ENTRY(invalid_TSS)
+ ASM_CLAC
+ pushl $do_invalid_TSS
+ jmp error_code
+END(invalid_TSS)
+
+ENTRY(segment_not_present)
+ ASM_CLAC
+ pushl $do_segment_not_present
+ jmp error_code
+END(segment_not_present)
+
+ENTRY(stack_segment)
+ ASM_CLAC
+ pushl $do_stack_segment
+ jmp error_code
+END(stack_segment)
+
+ENTRY(alignment_check)
+ ASM_CLAC
+ pushl $do_alignment_check
+ jmp error_code
+END(alignment_check)
+
+ENTRY(divide_error)
+ ASM_CLAC
+ pushl $0 # no error code
+ pushl $do_divide_error
+ jmp error_code
+END(divide_error)
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+ ASM_CLAC
+ pushl $0
+ pushl machine_check_vector
+ jmp error_code
+END(machine_check)
+#endif
+
+ENTRY(spurious_interrupt_bug)
+ ASM_CLAC
+ pushl $0
+ pushl $do_spurious_interrupt_bug
+ jmp error_code
+END(spurious_interrupt_bug)
+
+#ifdef CONFIG_XEN
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
+ENTRY(xen_sysenter_target)
+ addl $5*4, %esp /* remove xen-provided frame */
+ jmp sysenter_past_esp
+
+ENTRY(xen_hypervisor_callback)
+ pushl $-1 /* orig_ax = -1 => not a system call */
+ SAVE_ALL
+ TRACE_IRQS_OFF
+
+ /*
+ * Check to see if we got the event in the critical
+ * region in xen_iret_direct, after we've reenabled
+ * events and checked for pending events. This simulates
+ * iret instruction's behaviour where it delivers a
+ * pending interrupt when enabling interrupts:
+ */
+ movl PT_EIP(%esp), %eax
+ cmpl $xen_iret_start_crit, %eax
+ jb 1f
+ cmpl $xen_iret_end_crit, %eax
+ jae 1f
+
+ jmp xen_iret_crit_fixup
+
+ENTRY(xen_do_upcall)
+1: mov %esp, %eax
+ call xen_evtchn_do_upcall
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
+ jmp ret_from_intr
+ENDPROC(xen_hypervisor_callback)
+
+/*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ * 1. Fault while reloading DS, ES, FS or GS
+ * 2. Fault while executing IRET
+ * Category 1 we fix up by reattempting the load, and zeroing the segment
+ * register if the load fails.
+ * Category 2 we fix up by jumping to do_iret_error. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by maintaining a status value in EAX.
+ */
+ENTRY(xen_failsafe_callback)
+ pushl %eax
+ movl $1, %eax
+1: mov 4(%esp), %ds
+2: mov 8(%esp), %es
+3: mov 12(%esp), %fs
+4: mov 16(%esp), %gs
+ /* EAX == 0 => Category 1 (Bad segment)
+ EAX != 0 => Category 2 (Bad IRET) */
+ testl %eax, %eax
+ popl %eax
+ lea 16(%esp), %esp
+ jz 5f
+ jmp iret_exc
+5: pushl $-1 /* orig_ax = -1 => not a system call */
+ SAVE_ALL
+ jmp ret_from_exception
+
+.section .fixup, "ax"
+6: xorl %eax, %eax
+ movl %eax, 4(%esp)
+ jmp 1b
+7: xorl %eax, %eax
+ movl %eax, 8(%esp)
+ jmp 2b
+8: xorl %eax, %eax
+ movl %eax, 12(%esp)
+ jmp 3b
+9: xorl %eax, %eax
+ movl %eax, 16(%esp)
+ jmp 4b
+.previous
+ _ASM_EXTABLE(1b, 6b)
+ _ASM_EXTABLE(2b, 7b)
+ _ASM_EXTABLE(3b, 8b)
+ _ASM_EXTABLE(4b, 9b)
+ENDPROC(xen_failsafe_callback)
+
+BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
+ xen_evtchn_do_upcall)
+
+#endif /* CONFIG_XEN */
+
+#if IS_ENABLED(CONFIG_HYPERV)
+
+BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
+ hyperv_vector_handler)
+
+#endif /* CONFIG_HYPERV */
+
+#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+ENTRY(mcount)
+ ret
+END(mcount)
+
+ENTRY(ftrace_caller)
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ pushl $0 /* Pass NULL as regs pointer */
+ movl 4*4(%esp), %eax
+ movl 0x4(%ebp), %edx
+ movl function_trace_op, %ecx
+ subl $MCOUNT_INSN_SIZE, %eax
+
+.globl ftrace_call
+ftrace_call:
+ call ftrace_stub
+
+ addl $4, %esp /* skip NULL pointer */
+ popl %edx
+ popl %ecx
+ popl %eax
+ftrace_ret:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl ftrace_graph_call
+ftrace_graph_call:
+ jmp ftrace_stub
+#endif
+
+.globl ftrace_stub
+ftrace_stub:
+ ret
+END(ftrace_caller)
+
+ENTRY(ftrace_regs_caller)
+ pushf /* push flags before compare (in cs location) */
+
+ /*
+ * i386 does not save SS and ESP when coming from kernel.
+ * Instead, to get sp, ®s->sp is used (see ptrace.h).
+ * Unfortunately, that means eflags must be at the same location
+ * as the current return ip is. We move the return ip into the
+ * ip location, and move flags into the return ip location.
+ */
+ pushl 4(%esp) /* save return ip into ip slot */
+
+ pushl $0 /* Load 0 into orig_ax */
+ pushl %gs
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+
+ movl 13*4(%esp), %eax /* Get the saved flags */
+ movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */
+ /* clobbering return ip */
+ movl $__KERNEL_CS, 13*4(%esp)
+
+ movl 12*4(%esp), %eax /* Load ip (1st parameter) */
+ subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */
+ movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */
+ movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
+ pushl %esp /* Save pt_regs as 4th parameter */
+
+GLOBAL(ftrace_regs_call)
+ call ftrace_stub
+
+ addl $4, %esp /* Skip pt_regs */
+ movl 14*4(%esp), %eax /* Move flags back into cs */
+ movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */
+ movl 12*4(%esp), %eax /* Get return ip from regs->ip */
+ movl %eax, 14*4(%esp) /* Put return ip back for ret */
+
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
+ popl %ds
+ popl %es
+ popl %fs
+ popl %gs
+ addl $8, %esp /* Skip orig_ax and ip */
+ popf /* Pop flags at end (no addl to corrupt flags) */
+ jmp ftrace_ret
+
+ popf
+ jmp ftrace_stub
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+
+ENTRY(mcount)
+ cmpl $__PAGE_OFFSET, %esp
+ jb ftrace_stub /* Paging not enabled yet? */
+
+ cmpl $ftrace_stub, ftrace_trace_function
+ jnz trace
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ cmpl $ftrace_stub, ftrace_graph_return
+ jnz ftrace_graph_caller
+
+ cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
+ jnz ftrace_graph_caller
+#endif
+.globl ftrace_stub
+ftrace_stub:
+ ret
+
+ /* taken from glibc */
+trace:
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ movl 0xc(%esp), %eax
+ movl 0x4(%ebp), %edx
+ subl $MCOUNT_INSN_SIZE, %eax
+
+ call *ftrace_trace_function
+
+ popl %edx
+ popl %ecx
+ popl %eax
+ jmp ftrace_stub
+END(mcount)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ movl 0xc(%esp), %eax
+ lea 0x4(%ebp), %edx
+ movl (%ebp), %ecx
+ subl $MCOUNT_INSN_SIZE, %eax
+ call prepare_ftrace_return
+ popl %edx
+ popl %ecx
+ popl %eax
+ ret
+END(ftrace_graph_caller)
+
+.globl return_to_handler
+return_to_handler:
+ pushl %eax
+ pushl %edx
+ movl %ebp, %eax
+ call ftrace_return_to_handler
+ movl %eax, %ecx
+ popl %edx
+ popl %eax
+ jmp *%ecx
+#endif
+
+#ifdef CONFIG_TRACING
+ENTRY(trace_page_fault)
+ ASM_CLAC
+ pushl $trace_do_page_fault
+ jmp error_code
+END(trace_page_fault)
+#endif
+
+ENTRY(page_fault)
+ ASM_CLAC
+ pushl $do_page_fault
+ ALIGN
+error_code:
+ /* the function address is in %gs's slot on the stack */
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+ cld
+ movl $(__KERNEL_PERCPU), %ecx
+ movl %ecx, %fs
+ UNWIND_ESPFIX_STACK
+ GS_TO_REG %ecx
+ movl PT_GS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ REG_TO_PTGS %ecx
+ SET_KERNEL_GS %ecx
+ movl $(__USER_DS), %ecx
+ movl %ecx, %ds
+ movl %ecx, %es
+ TRACE_IRQS_OFF
+ movl %esp, %eax # pt_regs pointer
+ call *%edi
+ jmp ret_from_exception
+END(page_fault)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+.macro FIX_STACK offset ok label
+ cmpw $__KERNEL_CS, 4(%esp)
+ jne \ok
+\label:
+ movl TSS_sysenter_sp0 + \offset(%esp), %esp
+ pushfl
+ pushl $__KERNEL_CS
+ pushl $sysenter_past_esp
+.endm
+
+ENTRY(debug)
+ ASM_CLAC
+ cmpl $entry_SYSENTER_32, (%esp)
+ jne debug_stack_correct
+ FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
+debug_stack_correct:
+ pushl $-1 # mark this as an int
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ xorl %edx, %edx # error code 0
+ movl %esp, %eax # pt_regs pointer
+ call do_debug
+ jmp ret_from_exception
+END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+ ASM_CLAC
+#ifdef CONFIG_X86_ESPFIX32
+ pushl %eax
+ movl %ss, %eax
+ cmpw $__ESPFIX_SS, %ax
+ popl %eax
+ je nmi_espfix_stack
+#endif
+ cmpl $entry_SYSENTER_32, (%esp)
+ je nmi_stack_fixup
+ pushl %eax
+ movl %esp, %eax
+ /*
+ * Do not access memory above the end of our stack page,
+ * it might not exist.
+ */
+ andl $(THREAD_SIZE-1), %eax
+ cmpl $(THREAD_SIZE-20), %eax
+ popl %eax
+ jae nmi_stack_correct
+ cmpl $entry_SYSENTER_32, 12(%esp)
+ je nmi_debug_stack_check
+nmi_stack_correct:
+ pushl %eax
+ SAVE_ALL
+ xorl %edx, %edx # zero error code
+ movl %esp, %eax # pt_regs pointer
+ call do_nmi
+ jmp restore_all_notrace
+
+nmi_stack_fixup:
+ FIX_STACK 12, nmi_stack_correct, 1
+ jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+ cmpw $__KERNEL_CS, 16(%esp)
+ jne nmi_stack_correct
+ cmpl $debug, (%esp)
+ jb nmi_stack_correct
+ cmpl $debug_esp_fix_insn, (%esp)
+ ja nmi_stack_correct
+ FIX_STACK 24, nmi_stack_correct, 1
+ jmp nmi_stack_correct
+
+#ifdef CONFIG_X86_ESPFIX32
+nmi_espfix_stack:
+ /*
+ * create the pointer to lss back
+ */
+ pushl %ss
+ pushl %esp
+ addl $4, (%esp)
+ /* copy the iret frame of 12 bytes */
+ .rept 3
+ pushl 16(%esp)
+ .endr
+ pushl %eax
+ SAVE_ALL
+ FIXUP_ESPFIX_STACK # %eax == %esp
+ xorl %edx, %edx # zero error code
+ call do_nmi
+ RESTORE_REGS
+ lss 12+4(%esp), %esp # back to espfix stack
+ jmp irq_return
+#endif
+END(nmi)
+
+ENTRY(int3)
+ ASM_CLAC
+ pushl $-1 # mark this as an int
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ xorl %edx, %edx # zero error code
+ movl %esp, %eax # pt_regs pointer
+ call do_int3
+ jmp ret_from_exception
+END(int3)
+
+ENTRY(general_protection)
+ pushl $do_general_protection
+ jmp error_code
+END(general_protection)
+
+#ifdef CONFIG_KVM_GUEST
+ENTRY(async_page_fault)
+ ASM_CLAC
+ pushl $do_async_page_fault
+ jmp error_code
+END(async_page_fault)
+#endif
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
new file mode 100644
index 0000000..3bb2c43
--- /dev/null
+++ b/arch/x86/entry/entry_64.S
@@ -0,0 +1,1458 @@
+/*
+ * linux/arch/x86_64/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
+ * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ *
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * Some of this is documented in Documentation/x86/entry_64.txt
+ *
+ * A note on terminology:
+ * - iret frame: Architecture defined interrupt frame from SS to RIP
+ * at the top of the kernel process stack.
+ *
+ * Some macro usage:
+ * - ENTRY/END: Define functions in the symbol table.
+ * - TRACE_IRQ_*: Trace hardirq state for lock debugging.
+ * - idtentry: Define exception entry points.
+ */
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include "calling.h"
+#include <asm/asm-offsets.h>
+#include <asm/msr.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/hw_irq.h>
+#include <asm/page_types.h>
+#include <asm/irqflags.h>
+#include <asm/paravirt.h>
+#include <asm/percpu.h>
+#include <asm/asm.h>
+#include <asm/context_tracking.h>
+#include <asm/smap.h>
+#include <asm/pgtable_types.h>
+#include <linux/err.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE 0x40000000
+
+.code64
+.section .entry.text, "ax"
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_usergs_sysret64)
+ swapgs
+ sysretq
+ENDPROC(native_usergs_sysret64)
+#endif /* CONFIG_PARAVIRT */
+
+.macro TRACE_IRQS_IRETQ
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bt $9, EFLAGS(%rsp) /* interrupts off? */
+ jnc 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+/*
+ * When dynamic function tracer is enabled it will add a breakpoint
+ * to all locations that it is about to modify, sync CPUs, update
+ * all the code, sync CPUs, then remove the breakpoints. In this time
+ * if lockdep is enabled, it might jump back into the debug handler
+ * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
+ *
+ * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
+ * make sure the stack pointer does not get reset back to the top
+ * of the debug stack, and instead just reuses the current stack.
+ */
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
+
+.macro TRACE_IRQS_OFF_DEBUG
+ call debug_stack_set_zero
+ TRACE_IRQS_OFF
+ call debug_stack_reset
+.endm
+
+.macro TRACE_IRQS_ON_DEBUG
+ call debug_stack_set_zero
+ TRACE_IRQS_ON
+ call debug_stack_reset
+.endm
+
+.macro TRACE_IRQS_IRETQ_DEBUG
+ bt $9, EFLAGS(%rsp) /* interrupts off? */
+ jnc 1f
+ TRACE_IRQS_ON_DEBUG
+1:
+.endm
+
+#else
+# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF
+# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON
+# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ
+#endif
+
+/*
+ * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
+ *
+ * 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
+ * then loads new ss, cs, and rip from previously programmed MSRs.
+ * rflags gets masked by a value from another MSR (so CLD and CLAC
+ * are not needed). SYSCALL does not save anything on the stack
+ * and does not change rsp.
+ *
+ * Registers on entry:
+ * rax system call number
+ * rcx return address
+ * r11 saved rflags (note: r11 is callee-clobbered register in C ABI)
+ * rdi arg0
+ * rsi arg1
+ * rdx arg2
+ * r10 arg3 (needs to be moved to rcx to conform to C ABI)
+ * r8 arg4
+ * r9 arg5
+ * (note: r12-r15, rbp, rbx are callee-preserved in C ABI)
+ *
+ * Only called from user space.
+ *
+ * When user can change pt_regs->foo always force IRET. That is because
+ * it deals with uncanonical addresses better. SYSRET has trouble
+ * with them due to bugs in both AMD and Intel CPUs.
+ */
+
+ENTRY(entry_SYSCALL_64)
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ /*
+ * A hypervisor implementation might want to use a label
+ * after the swapgs, so that it can do the swapgs
+ * for the guest and jump here on syscall.
+ */
+GLOBAL(entry_SYSCALL_64_after_swapgs)
+
+ movq %rsp, PER_CPU_VAR(rsp_scratch)
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+
+ /* Construct struct pt_regs on stack */
+ pushq $__USER_DS /* pt_regs->ss */
+ pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
+ /*
+ * Re-enable interrupts.
+ * We use 'rsp_scratch' as a scratch space, hence irq-off block above
+ * must execute atomically in the face of possible interrupt-driven
+ * task preemption. We must enable interrupts only after we're done
+ * with using rsp_scratch:
+ */
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
+ pushq %r8 /* pt_regs->r8 */
+ pushq %r9 /* pt_regs->r9 */
+ pushq %r10 /* pt_regs->r10 */
+ pushq %r11 /* pt_regs->r11 */
+ sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
+
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz tracesys
+entry_SYSCALL_64_fastpath:
+#if __SYSCALL_MASK == ~0
+ cmpq $__NR_syscall_max, %rax
+#else
+ andl $__SYSCALL_MASK, %eax
+ cmpl $__NR_syscall_max, %eax
+#endif
+ ja 1f /* return -ENOSYS (already in pt_regs->ax) */
+ movq %r10, %rcx
+ call *sys_call_table(, %rax, 8)
+ movq %rax, RAX(%rsp)
+1:
+/*
+ * Syscall return path ending with SYSRET (fast path).
+ * Has incompletely filled pt_regs.
+ */
+ LOCKDEP_SYS_EXIT
+ /*
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ DISABLE_INTERRUPTS(CLBR_NONE)
+
+ /*
+ * We must check ti flags with interrupts (or at least preemption)
+ * off because we must *never* return to userspace without
+ * processing exit work that is enqueued if we're preempted here.
+ * In particular, returning to userspace with any of the one-shot
+ * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
+ * very bad.
+ */
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
+
+ RESTORE_C_REGS_EXCEPT_RCX_R11
+ movq RIP(%rsp), %rcx
+ movq EFLAGS(%rsp), %r11
+ movq RSP(%rsp), %rsp
+ /*
+ * 64-bit SYSRET restores rip from rcx,
+ * rflags from r11 (but RF and VM bits are forced to 0),
+ * cs and ss are loaded from MSRs.
+ * Restoration of rflags re-enables interrupts.
+ *
+ * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
+ * descriptor is not reinitialized. This means that we should
+ * avoid SYSRET with SS == NULL, which could happen if we schedule,
+ * exit the kernel, and re-enter using an interrupt vector. (All
+ * interrupt entries on x86_64 set SS to NULL.) We prevent that
+ * from happening by reloading SS in __switch_to. (Actually
+ * detecting the failure in 64-bit userspace is tricky but can be
+ * done.)
+ */
+ USERGS_SYSRET64
+
+ /* Do syscall entry tracing */
+tracesys:
+ movq %rsp, %rdi
+ movl $AUDIT_ARCH_X86_64, %esi
+ call syscall_trace_enter_phase1
+ test %rax, %rax
+ jnz tracesys_phase2 /* if needed, run the slow path */
+ RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
+ movq ORIG_RAX(%rsp), %rax
+ jmp entry_SYSCALL_64_fastpath /* and return to the fast path */
+
+tracesys_phase2:
+ SAVE_EXTRA_REGS
+ movq %rsp, %rdi
+ movl $AUDIT_ARCH_X86_64, %esi
+ movq %rax, %rdx
+ call syscall_trace_enter_phase2
+
+ /*
+ * Reload registers from stack in case ptrace changed them.
+ * We don't reload %rax because syscall_trace_entry_phase2() returned
+ * the value it wants us to use in the table lookup.
+ */
+ RESTORE_C_REGS_EXCEPT_RAX
+ RESTORE_EXTRA_REGS
+#if __SYSCALL_MASK == ~0
+ cmpq $__NR_syscall_max, %rax
+#else
+ andl $__SYSCALL_MASK, %eax
+ cmpl $__NR_syscall_max, %eax
+#endif
+ ja 1f /* return -ENOSYS (already in pt_regs->ax) */
+ movq %r10, %rcx /* fixup for C */
+ call *sys_call_table(, %rax, 8)
+ movq %rax, RAX(%rsp)
+1:
+ /* Use IRET because user could have changed pt_regs->foo */
+
+/*
+ * Syscall return path ending with IRET.
+ * Has correct iret frame.
+ */
+GLOBAL(int_ret_from_sys_call)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
+ TRACE_IRQS_OFF
+ movl $_TIF_ALLWORK_MASK, %edi
+ /* edi: mask to check */
+GLOBAL(int_with_check)
+ LOCKDEP_SYS_EXIT_IRQ
+ GET_THREAD_INFO(%rcx)
+ movl TI_flags(%rcx), %edx
+ andl %edi, %edx
+ jnz int_careful
+ andl $~TS_COMPAT, TI_status(%rcx)
+ jmp syscall_return
+
+ /*
+ * Either reschedule or signal or syscall exit tracking needed.
+ * First do a reschedule test.
+ * edx: work, edi: workmask
+ */
+int_careful:
+ bt $TIF_NEED_RESCHED, %edx
+ jnc int_very_careful
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %rdi
+ SCHEDULE_USER
+ popq %rdi
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+ /* handle signals and tracing -- both require a full pt_regs */
+int_very_careful:
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ SAVE_EXTRA_REGS
+ /* Check for syscall exit trace */
+ testl $_TIF_WORK_SYSCALL_EXIT, %edx
+ jz int_signal
+ pushq %rdi
+ leaq 8(%rsp), %rdi /* &ptregs -> arg1 */
+ call syscall_trace_leave
+ popq %rdi
+ andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU), %edi
+ jmp int_restore_rest
+
+int_signal:
+ testl $_TIF_DO_NOTIFY_MASK, %edx
+ jz 1f
+ movq %rsp, %rdi /* &ptregs -> arg1 */
+ xorl %esi, %esi /* oldset -> arg2 */
+ call do_notify_resume
+1: movl $_TIF_WORK_MASK, %edi
+int_restore_rest:
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+syscall_return:
+ /* The IRETQ could re-enable interrupts: */
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_IRETQ
+
+ /*
+ * Try to use SYSRET instead of IRET if we're returning to
+ * a completely clean 64-bit userspace context.
+ */
+ movq RCX(%rsp), %rcx
+ movq RIP(%rsp), %r11
+ cmpq %rcx, %r11 /* RCX == RIP */
+ jne opportunistic_sysret_failed
+
+ /*
+ * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
+ * in kernel space. This essentially lets the user take over
+ * the kernel, since userspace controls RSP.
+ *
+ * If width of "canonical tail" ever becomes variable, this will need
+ * to be updated to remain correct on both old and new CPUs.
+ */
+ .ifne __VIRTUAL_MASK_SHIFT - 47
+ .error "virtual address width changed -- SYSRET checks need update"
+ .endif
+
+ /* Change top 16 bits to be the sign-extension of 47th bit */
+ shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
+ sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
+
+ /* If this changed %rcx, it was not canonical */
+ cmpq %rcx, %r11
+ jne opportunistic_sysret_failed
+
+ cmpq $__USER_CS, CS(%rsp) /* CS must match SYSRET */
+ jne opportunistic_sysret_failed
+
+ movq R11(%rsp), %r11
+ cmpq %r11, EFLAGS(%rsp) /* R11 == RFLAGS */
+ jne opportunistic_sysret_failed
+
+ /*
+ * SYSRET can't restore RF. SYSRET can restore TF, but unlike IRET,
+ * restoring TF results in a trap from userspace immediately after
+ * SYSRET. This would cause an infinite loop whenever #DB happens
+ * with register state that satisfies the opportunistic SYSRET
+ * conditions. For example, single-stepping this user code:
+ *
+ * movq $stuck_here, %rcx
+ * pushfq
+ * popq %r11
+ * stuck_here:
+ *
+ * would never get past 'stuck_here'.
+ */
+ testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
+ jnz opportunistic_sysret_failed
+
+ /* nothing to check for RSP */
+
+ cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */
+ jne opportunistic_sysret_failed
+
+ /*
+ * We win! This label is here just for ease of understanding
+ * perf profiles. Nothing jumps here.
+ */
+syscall_return_via_sysret:
+ /* rcx and r11 are already restored (see code above) */
+ RESTORE_C_REGS_EXCEPT_RCX_R11
+ movq RSP(%rsp), %rsp
+ USERGS_SYSRET64
+
+opportunistic_sysret_failed:
+ SWAPGS
+ jmp restore_c_regs_and_iret
+END(entry_SYSCALL_64)
+
+
+ .macro FORK_LIKE func
+ENTRY(stub_\func)
+ SAVE_EXTRA_REGS 8
+ jmp sys_\func
+END(stub_\func)
+ .endm
+
+ FORK_LIKE clone
+ FORK_LIKE fork
+ FORK_LIKE vfork
+
+ENTRY(stub_execve)
+ call sys_execve
+return_from_execve:
+ testl %eax, %eax
+ jz 1f
+ /* exec failed, can use fast SYSRET code path in this case */
+ ret
+1:
+ /* must use IRET code path (pt_regs->cs may have changed) */
+ addq $8, %rsp
+ ZERO_EXTRA_REGS
+ movq %rax, RAX(%rsp)
+ jmp int_ret_from_sys_call
+END(stub_execve)
+/*
+ * Remaining execve stubs are only 7 bytes long.
+ * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
+ */
+ .align 8
+GLOBAL(stub_execveat)
+ call sys_execveat
+ jmp return_from_execve
+END(stub_execveat)
+
+#if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
+ .align 8
+GLOBAL(stub_x32_execve)
+GLOBAL(stub32_execve)
+ call compat_sys_execve
+ jmp return_from_execve
+END(stub32_execve)
+END(stub_x32_execve)
+ .align 8
+GLOBAL(stub_x32_execveat)
+GLOBAL(stub32_execveat)
+ call compat_sys_execveat
+ jmp return_from_execve
+END(stub32_execveat)
+END(stub_x32_execveat)
+#endif
+
+/*
+ * sigreturn is special because it needs to restore all registers on return.
+ * This cannot be done with SYSRET, so use the IRET return path instead.
+ */
+ENTRY(stub_rt_sigreturn)
+ /*
+ * SAVE_EXTRA_REGS result is not normally needed:
+ * sigreturn overwrites all pt_regs->GPREGS.
+ * But sigreturn can fail (!), and there is no easy way to detect that.
+ * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
+ * we SAVE_EXTRA_REGS here.
+ */
+ SAVE_EXTRA_REGS 8
+ call sys_rt_sigreturn
+return_from_stub:
+ addq $8, %rsp
+ RESTORE_EXTRA_REGS
+ movq %rax, RAX(%rsp)
+ jmp int_ret_from_sys_call
+END(stub_rt_sigreturn)
+
+#ifdef CONFIG_X86_X32_ABI
+ENTRY(stub_x32_rt_sigreturn)
+ SAVE_EXTRA_REGS 8
+ call sys32_x32_rt_sigreturn
+ jmp return_from_stub
+END(stub_x32_rt_sigreturn)
+#endif
+
+/*
+ * A newly forked process directly context switches into this address.
+ *
+ * rdi: prev task we switched from
+ */
+ENTRY(ret_from_fork)
+
+ LOCK ; btr $TIF_FORK, TI_flags(%r8)
+
+ pushq $0x0002
+ popfq /* reset kernel eflags */
+
+ call schedule_tail /* rdi: 'prev' task parameter */
+
+ RESTORE_EXTRA_REGS
+
+ testb $3, CS(%rsp) /* from kernel_thread? */
+
+ /*
+ * By the time we get here, we have no idea whether our pt_regs,
+ * ti flags, and ti status came from the 64-bit SYSCALL fast path,
+ * the slow path, or one of the 32-bit compat paths.
+ * Use IRET code path to return, since it can safely handle
+ * all of the above.
+ */
+ jnz int_ret_from_sys_call
+
+ /*
+ * We came from kernel_thread
+ * nb: we depend on RESTORE_EXTRA_REGS above
+ */
+ movq %rbp, %rdi
+ call *%rbx
+ movl $0, RAX(%rsp)
+ RESTORE_EXTRA_REGS
+ jmp int_ret_from_sys_call
+END(ret_from_fork)
+
+/*
+ * Build the entry stubs with some assembler magic.
+ * We pack 1 stub into every 8-byte block.
+ */
+ .align 8
+ENTRY(irq_entries_start)
+ vector=FIRST_EXTERNAL_VECTOR
+ .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
+ pushq $(~vector+0x80) /* Note: always in signed byte range */
+ vector=vector+1
+ jmp common_interrupt
+ .align 8
+ .endr
+END(irq_entries_start)
+
+/*
+ * Interrupt entry/exit.
+ *
+ * Interrupt entry points save only callee clobbered registers in fast path.
+ *
+ * Entry runs with interrupts off.
+ */
+
+/* 0(%rsp): ~(interrupt number) */
+ .macro interrupt func
+ cld
+ /*
+ * Since nothing in interrupt handling code touches r12...r15 members
+ * of "struct pt_regs", and since interrupts can nest, we can save
+ * four stack slots and simultaneously provide
+ * an unwind-friendly stack layout by saving "truncated" pt_regs
+ * exactly up to rbp slot, without these members.
+ */
+ ALLOC_PT_GPREGS_ON_STACK -RBP
+ SAVE_C_REGS -RBP
+ /* this goes to 0(%rsp) for unwinder, not for saving the value: */
+ SAVE_EXTRA_REGS_RBP -RBP
+
+ leaq -RBP(%rsp), %rdi /* arg1 for \func (pointer to pt_regs) */
+
+ testb $3, CS-RBP(%rsp)
+ jz 1f
+ SWAPGS
+1:
+ /*
+ * Save previous stack pointer, optionally switch to interrupt stack.
+ * irq_count is used to check if a CPU is already on an interrupt stack
+ * or not. While this is essentially redundant with preempt_count it is
+ * a little cheaper to use a separate counter in the PDA (short of
+ * moving irq_enter into assembly, which would be too much work)
+ */
+ movq %rsp, %rsi
+ incl PER_CPU_VAR(irq_count)
+ cmovzq PER_CPU_VAR(irq_stack_ptr), %rsp
+ pushq %rsi
+ /* We entered an interrupt context - irqs are off: */
+ TRACE_IRQS_OFF
+
+ call \func
+ .endm
+
+ /*
+ * The interrupt stubs push (~vector+0x80) onto the stack and
+ * then jump to common_interrupt.
+ */
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
+ ASM_CLAC
+ addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */
+ interrupt do_IRQ
+ /* 0(%rsp): old RSP */
+ret_from_intr:
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ decl PER_CPU_VAR(irq_count)
+
+ /* Restore saved previous stack */
+ popq %rsi
+ /* return code expects complete pt_regs - adjust rsp accordingly: */
+ leaq -RBP(%rsi), %rsp
+
+ testb $3, CS(%rsp)
+ jz retint_kernel
+ /* Interrupt came from user space */
+retint_user:
+ GET_THREAD_INFO(%rcx)
+
+ /* %rcx: thread info. Interrupts are off. */
+retint_with_reschedule:
+ movl $_TIF_WORK_MASK, %edi
+retint_check:
+ LOCKDEP_SYS_EXIT_IRQ
+ movl TI_flags(%rcx), %edx
+ andl %edi, %edx
+ jnz retint_careful
+
+retint_swapgs: /* return to user-space */
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_IRETQ
+
+ SWAPGS
+ jmp restore_c_regs_and_iret
+
+/* Returning to kernel space */
+retint_kernel:
+#ifdef CONFIG_PREEMPT
+ /* Interrupts are off */
+ /* Check if we need preemption */
+ bt $9, EFLAGS(%rsp) /* were interrupts off? */
+ jnc 1f
+0: cmpl $0, PER_CPU_VAR(__preempt_count)
+ jnz 1f
+ call preempt_schedule_irq
+ jmp 0b
+1:
+#endif
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ TRACE_IRQS_IRETQ
+
+/*
+ * At this label, code paths which return to kernel and to user,
+ * which come from interrupts/exception and from syscalls, merge.
+ */
+restore_c_regs_and_iret:
+ RESTORE_C_REGS
+ REMOVE_PT_GPREGS_FROM_STACK 8
+ INTERRUPT_RETURN
+
+ENTRY(native_iret)
+ /*
+ * Are we returning to a stack segment from the LDT? Note: in
+ * 64-bit mode SS:RSP on the exception stack is always valid.
+ */
+#ifdef CONFIG_X86_ESPFIX64
+ testb $4, (SS-RIP)(%rsp)
+ jnz native_irq_return_ldt
+#endif
+
+.global native_irq_return_iret
+native_irq_return_iret:
+ /*
+ * This may fault. Non-paranoid faults on return to userspace are
+ * handled by fixup_bad_iret. These include #SS, #GP, and #NP.
+ * Double-faults due to espfix64 are handled in do_double_fault.
+ * Other faults here are fatal.
+ */
+ iretq
+
+#ifdef CONFIG_X86_ESPFIX64
+native_irq_return_ldt:
+ pushq %rax
+ pushq %rdi
+ SWAPGS
+ movq PER_CPU_VAR(espfix_waddr), %rdi
+ movq %rax, (0*8)(%rdi) /* RAX */
+ movq (2*8)(%rsp), %rax /* RIP */
+ movq %rax, (1*8)(%rdi)
+ movq (3*8)(%rsp), %rax /* CS */
+ movq %rax, (2*8)(%rdi)
+ movq (4*8)(%rsp), %rax /* RFLAGS */
+ movq %rax, (3*8)(%rdi)
+ movq (6*8)(%rsp), %rax /* SS */
+ movq %rax, (5*8)(%rdi)
+ movq (5*8)(%rsp), %rax /* RSP */
+ movq %rax, (4*8)(%rdi)
+ andl $0xffff0000, %eax
+ popq %rdi
+ orq PER_CPU_VAR(espfix_stack), %rax
+ SWAPGS
+ movq %rax, %rsp
+ popq %rax
+ jmp native_irq_return_iret
+#endif
+
+ /* edi: workmask, edx: work */
+retint_careful:
+ bt $TIF_NEED_RESCHED, %edx
+ jnc retint_signal
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %rdi
+ SCHEDULE_USER
+ popq %rdi
+ GET_THREAD_INFO(%rcx)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp retint_check
+
+retint_signal:
+ testl $_TIF_DO_NOTIFY_MASK, %edx
+ jz retint_swapgs
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ SAVE_EXTRA_REGS
+ movq $-1, ORIG_RAX(%rsp)
+ xorl %esi, %esi /* oldset */
+ movq %rsp, %rdi /* &pt_regs */
+ call do_notify_resume
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ GET_THREAD_INFO(%rcx)
+ jmp retint_with_reschedule
+
+END(common_interrupt)
+
+/*
+ * APIC interrupts.
+ */
+.macro apicinterrupt3 num sym do_sym
+ENTRY(\sym)
+ ASM_CLAC
+ pushq $~(\num)
+.Lcommon_\sym:
+ interrupt \do_sym
+ jmp ret_from_intr
+END(\sym)
+.endm
+
+#ifdef CONFIG_TRACING
+#define trace(sym) trace_##sym
+#define smp_trace(sym) smp_trace_##sym
+
+.macro trace_apicinterrupt num sym
+apicinterrupt3 \num trace(\sym) smp_trace(\sym)
+.endm
+#else
+.macro trace_apicinterrupt num sym do_sym
+.endm
+#endif
+
+.macro apicinterrupt num sym do_sym
+apicinterrupt3 \num \sym \do_sym
+trace_apicinterrupt \num \sym
+.endm
+
+#ifdef CONFIG_SMP
+apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+apicinterrupt3 REBOOT_VECTOR reboot_interrupt smp_reboot_interrupt
+#endif
+
+#ifdef CONFIG_X86_UV
+apicinterrupt3 UV_BAU_MESSAGE uv_bau_message_intr1 uv_bau_message_interrupt
+#endif
+
+apicinterrupt LOCAL_TIMER_VECTOR apic_timer_interrupt smp_apic_timer_interrupt
+apicinterrupt X86_PLATFORM_IPI_VECTOR x86_platform_ipi smp_x86_platform_ipi
+
+#ifdef CONFIG_HAVE_KVM
+apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
+apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi
+#endif
+
+#ifdef CONFIG_X86_MCE_THRESHOLD
+apicinterrupt THRESHOLD_APIC_VECTOR threshold_interrupt smp_threshold_interrupt
+#endif
+
+#ifdef CONFIG_X86_MCE_AMD
+apicinterrupt DEFERRED_ERROR_VECTOR deferred_error_interrupt smp_deferred_error_interrupt
+#endif
+
+#ifdef CONFIG_X86_THERMAL_VECTOR
+apicinterrupt THERMAL_APIC_VECTOR thermal_interrupt smp_thermal_interrupt
+#endif
+
+#ifdef CONFIG_SMP
+apicinterrupt CALL_FUNCTION_SINGLE_VECTOR call_function_single_interrupt smp_call_function_single_interrupt
+apicinterrupt CALL_FUNCTION_VECTOR call_function_interrupt smp_call_function_interrupt
+apicinterrupt RESCHEDULE_VECTOR reschedule_interrupt smp_reschedule_interrupt
+#endif
+
+apicinterrupt ERROR_APIC_VECTOR error_interrupt smp_error_interrupt
+apicinterrupt SPURIOUS_APIC_VECTOR spurious_interrupt smp_spurious_interrupt
+
+#ifdef CONFIG_IRQ_WORK
+apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
+#endif
+
+/*
+ * Exception entry points.
+ */
+#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
+
+.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
+ENTRY(\sym)
+ /* Sanity check */
+ .if \shift_ist != -1 && \paranoid == 0
+ .error "using shift_ist requires paranoid=1"
+ .endif
+
+ ASM_CLAC
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+
+ .ifeq \has_error_code
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
+ .endif
+
+ ALLOC_PT_GPREGS_ON_STACK
+
+ .if \paranoid
+ .if \paranoid == 1
+ testb $3, CS(%rsp) /* If coming from userspace, switch stacks */
+ jnz 1f
+ .endif
+ call paranoid_entry
+ .else
+ call error_entry
+ .endif
+ /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
+
+ .if \paranoid
+ .if \shift_ist != -1
+ TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */
+ .else
+ TRACE_IRQS_OFF
+ .endif
+ .endif
+
+ movq %rsp, %rdi /* pt_regs pointer */
+
+ .if \has_error_code
+ movq ORIG_RAX(%rsp), %rsi /* get error code */
+ movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */
+ .else
+ xorl %esi, %esi /* no error code */
+ .endif
+
+ .if \shift_ist != -1
+ subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
+ .endif
+
+ call \do_sym
+
+ .if \shift_ist != -1
+ addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
+ .endif
+
+ /* these procedures expect "no swapgs" flag in ebx */
+ .if \paranoid
+ jmp paranoid_exit
+ .else
+ jmp error_exit
+ .endif
+
+ .if \paranoid == 1
+ /*
+ * Paranoid entry from userspace. Switch stacks and treat it
+ * as a normal entry. This means that paranoid handlers
+ * run in real process context if user_mode(regs).
+ */
+1:
+ call error_entry
+
+
+ movq %rsp, %rdi /* pt_regs pointer */
+ call sync_regs
+ movq %rax, %rsp /* switch stack */
+
+ movq %rsp, %rdi /* pt_regs pointer */
+
+ .if \has_error_code
+ movq ORIG_RAX(%rsp), %rsi /* get error code */
+ movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */
+ .else
+ xorl %esi, %esi /* no error code */
+ .endif
+
+ call \do_sym
+
+ jmp error_exit /* %ebx: no swapgs flag */
+ .endif
+END(\sym)
+.endm
+
+#ifdef CONFIG_TRACING
+.macro trace_idtentry sym do_sym has_error_code:req
+idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
+idtentry \sym \do_sym has_error_code=\has_error_code
+.endm
+#else
+.macro trace_idtentry sym do_sym has_error_code:req
+idtentry \sym \do_sym has_error_code=\has_error_code
+.endm
+#endif
+
+idtentry divide_error do_divide_error has_error_code=0
+idtentry overflow do_overflow has_error_code=0
+idtentry bounds do_bounds has_error_code=0
+idtentry invalid_op do_invalid_op has_error_code=0
+idtentry device_not_available do_device_not_available has_error_code=0
+idtentry double_fault do_double_fault has_error_code=1 paranoid=2
+idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
+idtentry invalid_TSS do_invalid_TSS has_error_code=1
+idtentry segment_not_present do_segment_not_present has_error_code=1
+idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
+idtentry coprocessor_error do_coprocessor_error has_error_code=0
+idtentry alignment_check do_alignment_check has_error_code=1
+idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
+
+
+ /*
+ * Reload gs selector with exception handling
+ * edi: new selector
+ */
+ENTRY(native_load_gs_index)
+ pushfq
+ DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
+ SWAPGS
+gs_change:
+ movl %edi, %gs
+2: mfence /* workaround */
+ SWAPGS
+ popfq
+ ret
+END(native_load_gs_index)
+
+ _ASM_EXTABLE(gs_change, bad_gs)
+ .section .fixup, "ax"
+ /* running with kernelgs */
+bad_gs:
+ SWAPGS /* switch back to user gs */
+ xorl %eax, %eax
+ movl %eax, %gs
+ jmp 2b
+ .previous
+
+/* Call softirq on interrupt stack. Interrupts are off. */
+ENTRY(do_softirq_own_stack)
+ pushq %rbp
+ mov %rsp, %rbp
+ incl PER_CPU_VAR(irq_count)
+ cmove PER_CPU_VAR(irq_stack_ptr), %rsp
+ push %rbp /* frame pointer backlink */
+ call __do_softirq
+ leaveq
+ decl PER_CPU_VAR(irq_count)
+ ret
+END(do_softirq_own_stack)
+
+#ifdef CONFIG_XEN
+idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
+
+/*
+ * A note on the "critical region" in our callback handler.
+ * We want to avoid stacking callback handlers due to events occurring
+ * during handling of the last event. To do this, we keep events disabled
+ * until we've done all processing. HOWEVER, we must enable events before
+ * popping the stack frame (can't be done atomically) and so it would still
+ * be possible to get enough handler activations to overflow the stack.
+ * Although unlikely, bugs of that kind are hard to track down, so we'd
+ * like to avoid the possibility.
+ * So, on entry to the handler we detect whether we interrupted an
+ * existing activation in its critical region -- if so, we pop the current
+ * activation and restart the handler using the previous one.
+ */
+ENTRY(xen_do_hypervisor_callback) /* do_hypervisor_callback(struct *pt_regs) */
+
+/*
+ * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ * see the correct pointer to the pt_regs
+ */
+ movq %rdi, %rsp /* we don't return, adjust the stack frame */
+11: incl PER_CPU_VAR(irq_count)
+ movq %rsp, %rbp
+ cmovzq PER_CPU_VAR(irq_stack_ptr), %rsp
+ pushq %rbp /* frame pointer backlink */
+ call xen_evtchn_do_upcall
+ popq %rsp
+ decl PER_CPU_VAR(irq_count)
+#ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+#endif
+ jmp error_exit
+END(xen_do_hypervisor_callback)
+
+/*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ * 1. Fault while reloading DS, ES, FS or GS
+ * 2. Fault while executing IRET
+ * Category 1 we do not need to fix up as Xen has already reloaded all segment
+ * registers that could be reloaded and zeroed the others.
+ * Category 2 we fix up by killing the current process. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by comparing each saved segment register
+ * with its current contents: any discrepancy means we in category 1.
+ */
+ENTRY(xen_failsafe_callback)
+ movl %ds, %ecx
+ cmpw %cx, 0x10(%rsp)
+ jne 1f
+ movl %es, %ecx
+ cmpw %cx, 0x18(%rsp)
+ jne 1f
+ movl %fs, %ecx
+ cmpw %cx, 0x20(%rsp)
+ jne 1f
+ movl %gs, %ecx
+ cmpw %cx, 0x28(%rsp)
+ jne 1f
+ /* All segments match their saved values => Category 2 (Bad IRET). */
+ movq (%rsp), %rcx
+ movq 8(%rsp), %r11
+ addq $0x30, %rsp
+ pushq $0 /* RIP */
+ pushq %r11
+ pushq %rcx
+ jmp general_protection
+1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+ movq (%rsp), %rcx
+ movq 8(%rsp), %r11
+ addq $0x30, %rsp
+ pushq $-1 /* orig_ax = -1 => not a system call */
+ ALLOC_PT_GPREGS_ON_STACK
+ SAVE_C_REGS
+ SAVE_EXTRA_REGS
+ jmp error_exit
+END(xen_failsafe_callback)
+
+apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
+ xen_hvm_callback_vector xen_evtchn_do_upcall
+
+#endif /* CONFIG_XEN */
+
+#if IS_ENABLED(CONFIG_HYPERV)
+apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
+ hyperv_callback_vector hyperv_vector_handler
+#endif /* CONFIG_HYPERV */
+
+idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
+idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
+idtentry stack_segment do_stack_segment has_error_code=1
+
+#ifdef CONFIG_XEN
+idtentry xen_debug do_debug has_error_code=0
+idtentry xen_int3 do_int3 has_error_code=0
+idtentry xen_stack_segment do_stack_segment has_error_code=1
+#endif
+
+idtentry general_protection do_general_protection has_error_code=1
+trace_idtentry page_fault do_page_fault has_error_code=1
+
+#ifdef CONFIG_KVM_GUEST
+idtentry async_page_fault do_async_page_fault has_error_code=1
+#endif
+
+#ifdef CONFIG_X86_MCE
+idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
+#endif
+
+/*
+ * Save all registers in pt_regs, and switch gs if needed.
+ * Use slow, but surefire "are we in kernel?" check.
+ * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
+ */
+ENTRY(paranoid_entry)
+ cld
+ SAVE_C_REGS 8
+ SAVE_EXTRA_REGS 8
+ movl $1, %ebx
+ movl $MSR_GS_BASE, %ecx
+ rdmsr
+ testl %edx, %edx
+ js 1f /* negative -> in kernel */
+ SWAPGS
+ xorl %ebx, %ebx
+1: ret
+END(paranoid_entry)
+
+/*
+ * "Paranoid" exit path from exception stack. This is invoked
+ * only on return from non-NMI IST interrupts that came
+ * from kernel space.
+ *
+ * We may be returning to very strange contexts (e.g. very early
+ * in syscall entry), so checking for preemption here would
+ * be complicated. Fortunately, we there's no good reason
+ * to try to handle preemption here.
+ *
+ * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
+ */
+ENTRY(paranoid_exit)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF_DEBUG
+ testl %ebx, %ebx /* swapgs needed? */
+ jnz paranoid_exit_no_swapgs
+ TRACE_IRQS_IRETQ
+ SWAPGS_UNSAFE_STACK
+ jmp paranoid_exit_restore
+paranoid_exit_no_swapgs:
+ TRACE_IRQS_IRETQ_DEBUG
+paranoid_exit_restore:
+ RESTORE_EXTRA_REGS
+ RESTORE_C_REGS
+ REMOVE_PT_GPREGS_FROM_STACK 8
+ INTERRUPT_RETURN
+END(paranoid_exit)
+
+/*
+ * Save all registers in pt_regs, and switch gs if needed.
+ * Return: EBX=0: came from user mode; EBX=1: otherwise
+ */
+ENTRY(error_entry)
+ cld
+ SAVE_C_REGS 8
+ SAVE_EXTRA_REGS 8
+ xorl %ebx, %ebx
+ testb $3, CS+8(%rsp)
+ jz error_kernelspace
+
+ /* We entered from user mode */
+ SWAPGS
+
+error_entry_done:
+ TRACE_IRQS_OFF
+ ret
+
+ /*
+ * There are two places in the kernel that can potentially fault with
+ * usergs. Handle them here. B stepping K8s sometimes report a
+ * truncated RIP for IRET exceptions returning to compat mode. Check
+ * for these here too.
+ */
+error_kernelspace:
+ incl %ebx
+ leaq native_irq_return_iret(%rip), %rcx
+ cmpq %rcx, RIP+8(%rsp)
+ je error_bad_iret
+ movl %ecx, %eax /* zero extend */
+ cmpq %rax, RIP+8(%rsp)
+ je bstep_iret
+ cmpq $gs_change, RIP+8(%rsp)
+ jne error_entry_done
+
+ /*
+ * hack: gs_change can fail with user gsbase. If this happens, fix up
+ * gsbase and proceed. We'll fix up the exception and land in
+ * gs_change's error handler with kernel gsbase.
+ */
+ SWAPGS
+ jmp error_entry_done
+
+bstep_iret:
+ /* Fix truncated RIP */
+ movq %rcx, RIP+8(%rsp)
+ /* fall through */
+
+error_bad_iret:
+ /*
+ * We came from an IRET to user mode, so we have user gsbase.
+ * Switch to kernel gsbase:
+ */
+ SWAPGS
+
+ /*
+ * Pretend that the exception came from user mode: set up pt_regs
+ * as if we faulted immediately after IRET and clear EBX so that
+ * error_exit knows that we will be returning to user mode.
+ */
+ mov %rsp, %rdi
+ call fixup_bad_iret
+ mov %rax, %rsp
+ decl %ebx
+ jmp error_entry_done
+END(error_entry)
+
+
+/*
+ * On entry, EBS is a "return to kernel mode" flag:
+ * 1: already in kernel mode, don't need SWAPGS
+ * 0: user gsbase is loaded, we need SWAPGS and standard preparation for return to usermode
+ */
+ENTRY(error_exit)
+ movl %ebx, %eax
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl %eax, %eax
+ jnz retint_kernel
+ jmp retint_user
+END(error_exit)
+
+/* Runs on exception stack */
+ENTRY(nmi)
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ /*
+ * We allow breakpoints in NMIs. If a breakpoint occurs, then
+ * the iretq it performs will take us out of NMI context.
+ * This means that we can have nested NMIs where the next
+ * NMI is using the top of the stack of the previous NMI. We
+ * can't let it execute because the nested NMI will corrupt the
+ * stack of the previous NMI. NMI handlers are not re-entrant
+ * anyway.
+ *
+ * To handle this case we do the following:
+ * Check the a special location on the stack that contains
+ * a variable that is set when NMIs are executing.
+ * The interrupted task's stack is also checked to see if it
+ * is an NMI stack.
+ * If the variable is not set and the stack is not the NMI
+ * stack then:
+ * o Set the special variable on the stack
+ * o Copy the interrupt frame into a "saved" location on the stack
+ * o Copy the interrupt frame into a "copy" location on the stack
+ * o Continue processing the NMI
+ * If the variable is set or the previous stack is the NMI stack:
+ * o Modify the "copy" location to jump to the repeate_nmi
+ * o return back to the first NMI
+ *
+ * Now on exit of the first NMI, we first clear the stack variable
+ * The NMI stack will tell any nested NMIs at that point that it is
+ * nested. Then we pop the stack normally with iret, and if there was
+ * a nested NMI that updated the copy interrupt stack frame, a
+ * jump will be made to the repeat_nmi code that will handle the second
+ * NMI.
+ */
+
+ /* Use %rdx as our temp variable throughout */
+ pushq %rdx
+
+ /*
+ * If %cs was not the kernel segment, then the NMI triggered in user
+ * space, which means it is definitely not nested.
+ */
+ cmpl $__KERNEL_CS, 16(%rsp)
+ jne first_nmi
+
+ /*
+ * Check the special variable on the stack to see if NMIs are
+ * executing.
+ */
+ cmpl $1, -8(%rsp)
+ je nested_nmi
+
+ /*
+ * Now test if the previous stack was an NMI stack.
+ * We need the double check. We check the NMI stack to satisfy the
+ * race when the first NMI clears the variable before returning.
+ * We check the variable because the first NMI could be in a
+ * breakpoint routine using a breakpoint stack.
+ */
+ lea 6*8(%rsp), %rdx
+ /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
+ cmpq %rdx, 4*8(%rsp)
+ /* If the stack pointer is above the NMI stack, this is a normal NMI */
+ ja first_nmi
+
+ subq $EXCEPTION_STKSZ, %rdx
+ cmpq %rdx, 4*8(%rsp)
+ /* If it is below the NMI stack, it is a normal NMI */
+ jb first_nmi
+ /* Ah, it is within the NMI stack, treat it as nested */
+
+nested_nmi:
+ /*
+ * Do nothing if we interrupted the fixup in repeat_nmi.
+ * It's about to repeat the NMI handler, so we are fine
+ * with ignoring this one.
+ */
+ movq $repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja 1f
+ movq $end_repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja nested_nmi_out
+
+1:
+ /* Set up the interrupted NMIs stack to jump to repeat_nmi */
+ leaq -1*8(%rsp), %rdx
+ movq %rdx, %rsp
+ leaq -10*8(%rsp), %rdx
+ pushq $__KERNEL_DS
+ pushq %rdx
+ pushfq
+ pushq $__KERNEL_CS
+ pushq $repeat_nmi
+
+ /* Put stack back */
+ addq $(6*8), %rsp
+
+nested_nmi_out:
+ popq %rdx
+
+ /* No need to check faults here */
+ INTERRUPT_RETURN
+
+first_nmi:
+ /*
+ * Because nested NMIs will use the pushed location that we
+ * stored in rdx, we must keep that space available.
+ * Here's what our stack frame will look like:
+ * +-------------------------+
+ * | original SS |
+ * | original Return RSP |
+ * | original RFLAGS |
+ * | original CS |
+ * | original RIP |
+ * +-------------------------+
+ * | temp storage for rdx |
+ * +-------------------------+
+ * | NMI executing variable |
+ * +-------------------------+
+ * | copied SS |
+ * | copied Return RSP |
+ * | copied RFLAGS |
+ * | copied CS |
+ * | copied RIP |
+ * +-------------------------+
+ * | Saved SS |
+ * | Saved Return RSP |
+ * | Saved RFLAGS |
+ * | Saved CS |
+ * | Saved RIP |
+ * +-------------------------+
+ * | pt_regs |
+ * +-------------------------+
+ *
+ * The saved stack frame is used to fix up the copied stack frame
+ * that a nested NMI may change to make the interrupted NMI iret jump
+ * to the repeat_nmi. The original stack frame and the temp storage
+ * is also used by nested NMIs and can not be trusted on exit.
+ */
+ /* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+ movq (%rsp), %rdx
+
+ /* Set the NMI executing variable on the stack. */
+ pushq $1
+
+ /* Leave room for the "copied" frame */
+ subq $(5*8), %rsp
+
+ /* Copy the stack frame to the Saved frame */
+ .rept 5
+ pushq 11*8(%rsp)
+ .endr
+
+ /* Everything up to here is safe from nested NMIs */
+
+ /*
+ * If there was a nested NMI, the first NMI's iret will return
+ * here. But NMIs are still enabled and we can take another
+ * nested NMI. The nested NMI checks the interrupted RIP to see
+ * if it is between repeat_nmi and end_repeat_nmi, and if so
+ * it will just return, as we are about to repeat an NMI anyway.
+ * This makes it safe to copy to the stack frame that a nested
+ * NMI will update.
+ */
+repeat_nmi:
+ /*
+ * Update the stack variable to say we are still in NMI (the update
+ * is benign for the non-repeat case, where 1 was pushed just above
+ * to this very stack slot).
+ */
+ movq $1, 10*8(%rsp)
+
+ /* Make another copy, this one may be modified by nested NMIs */
+ addq $(10*8), %rsp
+ .rept 5
+ pushq -6*8(%rsp)
+ .endr
+ subq $(5*8), %rsp
+end_repeat_nmi:
+
+ /*
+ * Everything below this point can be preempted by a nested
+ * NMI if the first NMI took an exception and reset our iret stack
+ * so that we repeat another NMI.
+ */
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
+ ALLOC_PT_GPREGS_ON_STACK
+
+ /*
+ * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
+ * as we should not be calling schedule in NMI context.
+ * Even with normal interrupts enabled. An NMI should not be
+ * setting NEED_RESCHED or anything that normal interrupts and
+ * exceptions might do.
+ */
+ call paranoid_entry
+
+ /*
+ * Save off the CR2 register. If we take a page fault in the NMI then
+ * it could corrupt the CR2 value. If the NMI preempts a page fault
+ * handler before it was able to read the CR2 register, and then the
+ * NMI itself takes a page fault, the page fault that was preempted
+ * will read the information from the NMI page fault and not the
+ * origin fault. Save it off and restore it if it changes.
+ * Use the r12 callee-saved register.
+ */
+ movq %cr2, %r12
+
+ /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
+ movq %rsp, %rdi
+ movq $-1, %rsi
+ call do_nmi
+
+ /* Did the NMI take a page fault? Restore cr2 if it did */
+ movq %cr2, %rcx
+ cmpq %rcx, %r12
+ je 1f
+ movq %r12, %cr2
+1:
+ testl %ebx, %ebx /* swapgs needed? */
+ jnz nmi_restore
+nmi_swapgs:
+ SWAPGS_UNSAFE_STACK
+nmi_restore:
+ RESTORE_EXTRA_REGS
+ RESTORE_C_REGS
+ /* Pop the extra iret frame at once */
+ REMOVE_PT_GPREGS_FROM_STACK 6*8
+
+ /* Clear the NMI executing stack variable */
+ movq $0, 5*8(%rsp)
+ INTERRUPT_RETURN
+END(nmi)
+
+ENTRY(ignore_sysret)
+ mov $-ENOSYS, %eax
+ sysret
+END(ignore_sysret)
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
new file mode 100644
index 0000000..bb187a6
--- /dev/null
+++ b/arch/x86/entry/entry_64_compat.S
@@ -0,0 +1,556 @@
+/*
+ * Compatibility mode system call entry point for x86-64.
+ *
+ * Copyright 2000-2002 Andi Kleen, SuSE Labs.
+ */
+#include "calling.h"
+#include <asm/asm-offsets.h>
+#include <asm/current.h>
+#include <asm/errno.h>
+#include <asm/ia32_unistd.h>
+#include <asm/thread_info.h>
+#include <asm/segment.h>
+#include <asm/irqflags.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+#include <linux/linkage.h>
+#include <linux/err.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE 0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+# define sysexit_audit ia32_ret_from_sys_call
+# define sysretl_audit ia32_ret_from_sys_call
+#endif
+
+ .section .entry.text, "ax"
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_usergs_sysret32)
+ swapgs
+ sysretl
+ENDPROC(native_usergs_sysret32)
+#endif
+
+/*
+ * 32-bit SYSENTER instruction entry.
+ *
+ * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
+ * IF and VM in rflags are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old rip (!!!) and rflags.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp user stack
+ * 0(%ebp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(entry_SYSENTER_compat)
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %ebp, %ebp
+ movl %eax, %eax
+
+ movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
+
+ /* Construct struct pt_regs on stack */
+ pushq $__USER32_DS /* pt_regs->ss */
+ pushq %rbp /* pt_regs->sp */
+ pushfq /* pt_regs->flags */
+ pushq $__USER32_CS /* pt_regs->cs */
+ pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
+ cld
+ sub $(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
+
+ /*
+ * no need to do an access_ok check here because rbp has been
+ * 32-bit zero extended
+ */
+ ASM_STAC
+1: movl (%rbp), %ebp
+ _ASM_EXTABLE(1b, ia32_badarg)
+ ASM_CLAC
+
+ /*
+ * Sysenter doesn't filter flags, so we need to clear NT
+ * ourselves. To save a few cycles, we can check whether
+ * NT was set instead of doing an unconditional popfq.
+ */
+ testl $X86_EFLAGS_NT, EFLAGS(%rsp)
+ jnz sysenter_fix_flags
+sysenter_flags_fixed:
+
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz sysenter_tracesys
+
+sysenter_do_call:
+ /* 32-bit syscall -> 64-bit C ABI argument conversion */
+ movl %edi, %r8d /* arg5 */
+ movl %ebp, %r9d /* arg6 */
+ xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx, %edi /* arg1 */
+ movl %edx, %edx /* arg3 (zero extension) */
+sysenter_dispatch:
+ cmpq $(IA32_NR_syscalls-1), %rax
+ ja 1f
+ call *ia32_sys_call_table(, %rax, 8)
+ movq %rax, RAX(%rsp)
+1:
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz sysexit_audit
+sysexit_from_sys_call:
+ /*
+ * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
+ * NMI between STI and SYSEXIT has poorly specified behavior,
+ * and and NMI followed by an IRQ with usergs is fatal. So
+ * we just pretend we're using SYSEXIT but we really use
+ * SYSRETL instead.
+ *
+ * This code path is still called 'sysexit' because it pairs
+ * with 'sysenter' and it uses the SYSENTER calling convention.
+ */
+ andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ movl RIP(%rsp), %ecx /* User %eip */
+ RESTORE_RSI_RDI
+ xorl %edx, %edx /* Do not leak kernel information */
+ xorq %r8, %r8
+ xorq %r9, %r9
+ xorq %r10, %r10
+ movl EFLAGS(%rsp), %r11d /* User eflags */
+ TRACE_IRQS_ON
+
+ /*
+ * SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT,
+ * since it avoids a dicey window with interrupts enabled.
+ */
+ movl RSP(%rsp), %esp
+
+ /*
+ * USERGS_SYSRET32 does:
+ * gsbase = user's gs base
+ * eip = ecx
+ * rflags = r11
+ * cs = __USER32_CS
+ * ss = __USER_DS
+ *
+ * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
+ *
+ * pop %ebp
+ * pop %edx
+ * pop %ecx
+ *
+ * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
+ * avoid info leaks. R11 ends up with VDSO32_SYSENTER_RETURN's
+ * address (already known to user code), and R12-R15 are
+ * callee-saved and therefore don't contain any interesting
+ * kernel data.
+ */
+ USERGS_SYSRET32
+
+#ifdef CONFIG_AUDITSYSCALL
+ .macro auditsys_entry_common
+ /*
+ * At this point, registers hold syscall args in the 32-bit syscall ABI:
+ * EAX is syscall number, the 6 args are in EBX,ECX,EDX,ESI,EDI,EBP.
+ *
+ * We want to pass them to __audit_syscall_entry(), which is a 64-bit
+ * C function with 5 parameters, so shuffle them to match what
+ * the function expects: RDI,RSI,RDX,RCX,R8.
+ */
+ movl %esi, %r8d /* arg5 (R8 ) <= 4th syscall arg (ESI) */
+ xchg %ecx, %edx /* arg4 (RCX) <= 3rd syscall arg (EDX) */
+ /* arg3 (RDX) <= 2nd syscall arg (ECX) */
+ movl %ebx, %esi /* arg2 (RSI) <= 1st syscall arg (EBX) */
+ movl %eax, %edi /* arg1 (RDI) <= syscall number (EAX) */
+ call __audit_syscall_entry
+
+ /*
+ * We are going to jump back to the syscall dispatch code.
+ * Prepare syscall args as required by the 64-bit C ABI.
+ * Registers clobbered by __audit_syscall_entry() are
+ * loaded from pt_regs on stack:
+ */
+ movl ORIG_RAX(%rsp), %eax /* syscall number */
+ movl %ebx, %edi /* arg1 */
+ movl RCX(%rsp), %esi /* arg2 */
+ movl RDX(%rsp), %edx /* arg3 */
+ movl RSI(%rsp), %ecx /* arg4 */
+ movl RDI(%rsp), %r8d /* arg5 */
+ movl %ebp, %r9d /* arg6 */
+ .endm
+
+ .macro auditsys_exit exit
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz ia32_ret_from_sys_call
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ movl %eax, %esi /* second arg, syscall return value */
+ cmpl $-MAX_ERRNO, %eax /* is it an error ? */
+ jbe 1f
+ movslq %eax, %rsi /* if error sign extend to 64 bits */
+1: setbe %al /* 1 if error, 0 if not */
+ movzbl %al, %edi /* zero-extend that into %edi */
+ call __audit_syscall_exit
+ movq RAX(%rsp), %rax /* reload syscall return value */
+ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %edi
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz \exit
+ xorl %eax, %eax /* Do not leak kernel information */
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
+ jmp int_with_check
+ .endm
+
+sysenter_auditsys:
+ auditsys_entry_common
+ jmp sysenter_dispatch
+
+sysexit_audit:
+ auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_fix_flags:
+ pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
+ popfq
+ jmp sysenter_flags_fixed
+
+sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz sysenter_auditsys
+#endif
+ SAVE_EXTRA_REGS
+ xorl %eax, %eax /* Do not leak kernel information */
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
+ movq %rsp, %rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+
+ /* Reload arg registers from stack. (see sysenter_tracesys) */
+ movl RCX(%rsp), %ecx
+ movl RDX(%rsp), %edx
+ movl RSI(%rsp), %esi
+ movl RDI(%rsp), %edi
+ movl %eax, %eax /* zero extension */
+
+ RESTORE_EXTRA_REGS
+ jmp sysenter_do_call
+ENDPROC(entry_SYSENTER_compat)
+
+/*
+ * 32-bit SYSCALL instruction entry.
+ *
+ * 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
+ * then loads new ss, cs, and rip from previously programmed MSRs.
+ * rflags gets masked by a value from another MSR (so CLD and CLAC
+ * are not needed). SYSCALL does not save anything on the stack
+ * and does not change rsp.
+ *
+ * Note: rflags saving+masking-with-MSR happens only in Long mode
+ * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it).
+ * Don't get confused: rflags saving+masking depends on Long Mode Active bit
+ * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
+ * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
+ *
+ * Arguments:
+ * eax system call number
+ * ecx return address
+ * ebx arg1
+ * ebp arg2 (note: not saved in the stack frame, should not be touched)
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * esp user stack
+ * 0(%esp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(entry_SYSCALL_compat)
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ movl %esp, %r8d
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %eax, %eax
+
+ /* Construct struct pt_regs on stack */
+ pushq $__USER32_DS /* pt_regs->ss */
+ pushq %r8 /* pt_regs->sp */
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER32_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rbp /* pt_regs->cx */
+ movl %ebp, %ecx
+ pushq $-ENOSYS /* pt_regs->ax */
+ sub $(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
+
+ /*
+ * No need to do an access_ok check here because r8 has been
+ * 32-bit zero extended:
+ */
+ ASM_STAC
+1: movl (%r8), %ebp
+ _ASM_EXTABLE(1b, ia32_badarg)
+ ASM_CLAC
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz cstar_tracesys
+
+cstar_do_call:
+ /* 32-bit syscall -> 64-bit C ABI argument conversion */
+ movl %edi, %r8d /* arg5 */
+ movl %ebp, %r9d /* arg6 */
+ xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx, %edi /* arg1 */
+ movl %edx, %edx /* arg3 (zero extension) */
+
+cstar_dispatch:
+ cmpq $(IA32_NR_syscalls-1), %rax
+ ja 1f
+
+ call *ia32_sys_call_table(, %rax, 8)
+ movq %rax, RAX(%rsp)
+1:
+ movl RCX(%rsp), %ebp
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz sysretl_audit
+
+sysretl_from_sys_call:
+ andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ RESTORE_RSI_RDI_RDX
+ movl RIP(%rsp), %ecx
+ movl EFLAGS(%rsp), %r11d
+ xorq %r10, %r10
+ xorq %r9, %r9
+ xorq %r8, %r8
+ TRACE_IRQS_ON
+ movl RSP(%rsp), %esp
+ /*
+ * 64-bit->32-bit SYSRET restores eip from ecx,
+ * eflags from r11 (but RF and VM bits are forced to 0),
+ * cs and ss are loaded from MSRs.
+ * (Note: 32-bit->32-bit SYSRET is different: since r11
+ * does not exist, it merely sets eflags.IF=1).
+ *
+ * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
+ * descriptor is not reinitialized. This means that we must
+ * avoid SYSRET with SS == NULL, which could happen if we schedule,
+ * exit the kernel, and re-enter using an interrupt vector. (All
+ * interrupt entries on x86_64 set SS to NULL.) We prevent that
+ * from happening by reloading SS in __switch_to.
+ */
+ USERGS_SYSRET32
+
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
+ auditsys_entry_common
+ jmp cstar_dispatch
+
+sysretl_audit:
+ auditsys_exit sysretl_from_sys_call
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jz cstar_auditsys
+#endif
+ SAVE_EXTRA_REGS
+ xorl %eax, %eax /* Do not leak kernel information */
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
+ movq %rsp, %rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+
+ /* Reload arg registers from stack. (see sysenter_tracesys) */
+ movl RCX(%rsp), %ecx
+ movl RDX(%rsp), %edx
+ movl RSI(%rsp), %esi
+ movl RDI(%rsp), %edi
+ movl %eax, %eax /* zero extension */
+
+ RESTORE_EXTRA_REGS
+ jmp cstar_do_call
+END(entry_SYSCALL_compat)
+
+ia32_badarg:
+ ASM_CLAC
+ movq $-EFAULT, RAX(%rsp)
+ia32_ret_from_sys_call:
+ xorl %eax, %eax /* Do not leak kernel information */
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
+ jmp int_ret_from_sys_call
+
+/*
+ * Emulated IA32 system calls via int 0x80.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp arg6 (note: not saved in the stack frame, should not be touched)
+ *
+ * Notes:
+ * Uses the same stack frame as the x86-64 version.
+ * All registers except eax must be saved (but ptrace may violate that).
+ * Arguments are zero extended. For system calls that want sign extension and
+ * take long arguments a wrapper is needed. Most calls can just be called
+ * directly.
+ * Assumes it is only called from user space and entered with interrupts off.
+ */
+
+ENTRY(entry_INT80_compat)
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ SWAPGS
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
+ /* Zero-extending 32-bit regs, do not remove */
+ movl %eax, %eax
+
+ /* Construct struct pt_regs on stack (iret frame is already on stack) */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
+ pushq $0 /* pt_regs->r8 */
+ pushq $0 /* pt_regs->r9 */
+ pushq $0 /* pt_regs->r10 */
+ pushq $0 /* pt_regs->r11 */
+ cld
+ sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
+
+ orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz ia32_tracesys
+
+ia32_do_call:
+ /* 32-bit syscall -> 64-bit C ABI argument conversion */
+ movl %edi, %r8d /* arg5 */
+ movl %ebp, %r9d /* arg6 */
+ xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
+ movl %ebx, %edi /* arg1 */
+ movl %edx, %edx /* arg3 (zero extension) */
+ cmpq $(IA32_NR_syscalls-1), %rax
+ ja 1f
+
+ call *ia32_sys_call_table(, %rax, 8)
+ movq %rax, RAX(%rsp)
+1:
+ jmp int_ret_from_sys_call
+
+ia32_tracesys:
+ SAVE_EXTRA_REGS
+ movq %rsp, %rdi /* &pt_regs -> arg1 */
+ call syscall_trace_enter
+ /*
+ * Reload arg registers from stack in case ptrace changed them.
+ * Don't reload %eax because syscall_trace_enter() returned
+ * the %rax value we should see. But do truncate it to 32 bits.
+ * If it's -1 to make us punt the syscall, then (u32)-1 is still
+ * an appropriately invalid value.
+ */
+ movl RCX(%rsp), %ecx
+ movl RDX(%rsp), %edx
+ movl RSI(%rsp), %esi
+ movl RDI(%rsp), %edi
+ movl %eax, %eax /* zero extension */
+ RESTORE_EXTRA_REGS
+ jmp ia32_do_call
+END(entry_INT80_compat)
+
+ .macro PTREGSCALL label, func
+ ALIGN
+GLOBAL(\label)
+ leaq \func(%rip), %rax
+ jmp ia32_ptregs_common
+ .endm
+
+ PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
+ PTREGSCALL stub32_sigreturn, sys32_sigreturn
+ PTREGSCALL stub32_fork, sys_fork
+ PTREGSCALL stub32_vfork, sys_vfork
+
+ ALIGN
+GLOBAL(stub32_clone)
+ leaq sys_clone(%rip), %rax
+ /*
+ * The 32-bit clone ABI is: clone(..., int tls_val, int *child_tidptr).
+ * The 64-bit clone ABI is: clone(..., int *child_tidptr, int tls_val).
+ *
+ * The native 64-bit kernel's sys_clone() implements the latter,
+ * so we need to swap arguments here before calling it:
+ */
+ xchg %r8, %rcx
+ jmp ia32_ptregs_common
+
+ ALIGN
+ia32_ptregs_common:
+ SAVE_EXTRA_REGS 8
+ call *%rax
+ RESTORE_EXTRA_REGS 8
+ ret
+END(ia32_ptregs_common)
diff --git a/arch/x86/kernel/syscall_32.c b/arch/x86/entry/syscall_32.c
similarity index 79%
rename from arch/x86/kernel/syscall_32.c
rename to arch/x86/entry/syscall_32.c
index 3777189..8ea34f9 100644
--- a/arch/x86/kernel/syscall_32.c
+++ b/arch/x86/entry/syscall_32.c
@@ -10,7 +10,7 @@
#else
#define SYM(sym, compat) sym
#define ia32_sys_call_table sys_call_table
-#define __NR_ia32_syscall_max __NR_syscall_max
+#define __NR_syscall_compat_max __NR_syscall_max
#endif
#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
@@ -23,11 +23,11 @@
extern asmlinkage void sys_ni_syscall(void);
-__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
+__visible const sys_call_ptr_t ia32_sys_call_table[__NR_syscall_compat_max+1] = {
/*
* Smells like a compiler bug -- it doesn't work
* when the & below is removed.
*/
- [0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
+ [0 ... __NR_syscall_compat_max] = &sys_ni_syscall,
#include <asm/syscalls_32.h>
};
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/entry/syscall_64.c
similarity index 100%
rename from arch/x86/kernel/syscall_64.c
rename to arch/x86/entry/syscall_64.c
diff --git a/arch/x86/syscalls/Makefile b/arch/x86/entry/syscalls/Makefile
similarity index 95%
rename from arch/x86/syscalls/Makefile
rename to arch/x86/entry/syscalls/Makefile
index a55abb9..57aa59f 100644
--- a/arch/x86/syscalls/Makefile
+++ b/arch/x86/entry/syscalls/Makefile
@@ -1,5 +1,5 @@
-out := $(obj)/../include/generated/asm
-uapi := $(obj)/../include/generated/uapi/asm
+out := $(obj)/../../include/generated/asm
+uapi := $(obj)/../../include/generated/uapi/asm
# Create output directory if not already present
_dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
similarity index 100%
rename from arch/x86/syscalls/syscall_32.tbl
rename to arch/x86/entry/syscalls/syscall_32.tbl
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
similarity index 100%
rename from arch/x86/syscalls/syscall_64.tbl
rename to arch/x86/entry/syscalls/syscall_64.tbl
diff --git a/arch/x86/syscalls/syscallhdr.sh b/arch/x86/entry/syscalls/syscallhdr.sh
similarity index 100%
rename from arch/x86/syscalls/syscallhdr.sh
rename to arch/x86/entry/syscalls/syscallhdr.sh
diff --git a/arch/x86/syscalls/syscalltbl.sh b/arch/x86/entry/syscalls/syscalltbl.sh
similarity index 100%
rename from arch/x86/syscalls/syscalltbl.sh
rename to arch/x86/entry/syscalls/syscalltbl.sh
diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/entry/thunk_32.S
similarity index 83%
rename from arch/x86/lib/thunk_32.S
rename to arch/x86/entry/thunk_32.S
index e407941..e5a1711 100644
--- a/arch/x86/lib/thunk_32.S
+++ b/arch/x86/entry/thunk_32.S
@@ -6,16 +6,14 @@
*/
#include <linux/linkage.h>
#include <asm/asm.h>
- #include <asm/dwarf2.h>
/* put return address in eax (arg1) */
.macro THUNK name, func, put_ret_addr_in_eax=0
.globl \name
\name:
- CFI_STARTPROC
- pushl_cfi_reg eax
- pushl_cfi_reg ecx
- pushl_cfi_reg edx
+ pushl %eax
+ pushl %ecx
+ pushl %edx
.if \put_ret_addr_in_eax
/* Place EIP in the arg1 */
@@ -23,11 +21,10 @@
.endif
call \func
- popl_cfi_reg edx
- popl_cfi_reg ecx
- popl_cfi_reg eax
+ popl %edx
+ popl %ecx
+ popl %eax
ret
- CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/entry/thunk_64.S
similarity index 71%
rename from arch/x86/lib/thunk_64.S
rename to arch/x86/entry/thunk_64.S
index 2198902..efb2b93 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/entry/thunk_64.S
@@ -6,35 +6,32 @@
* Subject to the GNU public license, v.2. No warranty of any kind.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
+#include "calling.h"
#include <asm/asm.h>
/* rdi: arg1 ... normal C conventions. rax is saved/restored. */
.macro THUNK name, func, put_ret_addr_in_rdi=0
.globl \name
\name:
- CFI_STARTPROC
/* this one pushes 9 elems, the next one would be %rIP */
- pushq_cfi_reg rdi
- pushq_cfi_reg rsi
- pushq_cfi_reg rdx
- pushq_cfi_reg rcx
- pushq_cfi_reg rax
- pushq_cfi_reg r8
- pushq_cfi_reg r9
- pushq_cfi_reg r10
- pushq_cfi_reg r11
+ pushq %rdi
+ pushq %rsi
+ pushq %rdx
+ pushq %rcx
+ pushq %rax
+ pushq %r8
+ pushq %r9
+ pushq %r10
+ pushq %r11
.if \put_ret_addr_in_rdi
/* 9*8(%rsp) is return addr on stack */
- movq_cfi_restore 9*8, rdi
+ movq 9*8(%rsp), %rdi
.endif
call \func
jmp restore
- CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
@@ -55,19 +52,16 @@
#if defined(CONFIG_TRACE_IRQFLAGS) \
|| defined(CONFIG_DEBUG_LOCK_ALLOC) \
|| defined(CONFIG_PREEMPT)
- CFI_STARTPROC
- CFI_ADJUST_CFA_OFFSET 9*8
restore:
- popq_cfi_reg r11
- popq_cfi_reg r10
- popq_cfi_reg r9
- popq_cfi_reg r8
- popq_cfi_reg rax
- popq_cfi_reg rcx
- popq_cfi_reg rdx
- popq_cfi_reg rsi
- popq_cfi_reg rdi
+ popq %r11
+ popq %r10
+ popq %r9
+ popq %r8
+ popq %rax
+ popq %rcx
+ popq %rdx
+ popq %rsi
+ popq %rdi
ret
- CFI_ENDPROC
_ASM_NOKPROBE(restore)
#endif
diff --git a/arch/x86/vdso/.gitignore b/arch/x86/entry/vdso/.gitignore
similarity index 100%
rename from arch/x86/vdso/.gitignore
rename to arch/x86/entry/vdso/.gitignore
diff --git a/arch/x86/vdso/Makefile b/arch/x86/entry/vdso/Makefile
similarity index 100%
rename from arch/x86/vdso/Makefile
rename to arch/x86/entry/vdso/Makefile
diff --git a/arch/x86/vdso/checkundef.sh b/arch/x86/entry/vdso/checkundef.sh
similarity index 100%
rename from arch/x86/vdso/checkundef.sh
rename to arch/x86/entry/vdso/checkundef.sh
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
similarity index 100%
rename from arch/x86/vdso/vclock_gettime.c
rename to arch/x86/entry/vdso/vclock_gettime.c
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/entry/vdso/vdso-layout.lds.S
similarity index 100%
rename from arch/x86/vdso/vdso-layout.lds.S
rename to arch/x86/entry/vdso/vdso-layout.lds.S
diff --git a/arch/x86/vdso/vdso-note.S b/arch/x86/entry/vdso/vdso-note.S
similarity index 100%
rename from arch/x86/vdso/vdso-note.S
rename to arch/x86/entry/vdso/vdso-note.S
diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/entry/vdso/vdso.lds.S
similarity index 100%
rename from arch/x86/vdso/vdso.lds.S
rename to arch/x86/entry/vdso/vdso.lds.S
diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/entry/vdso/vdso2c.c
similarity index 100%
rename from arch/x86/vdso/vdso2c.c
rename to arch/x86/entry/vdso/vdso2c.c
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
similarity index 100%
rename from arch/x86/vdso/vdso2c.h
rename to arch/x86/entry/vdso/vdso2c.h
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c
similarity index 100%
rename from arch/x86/vdso/vdso32-setup.c
rename to arch/x86/entry/vdso/vdso32-setup.c
diff --git a/arch/x86/vdso/vdso32/.gitignore b/arch/x86/entry/vdso/vdso32/.gitignore
similarity index 100%
rename from arch/x86/vdso/vdso32/.gitignore
rename to arch/x86/entry/vdso/vdso32/.gitignore
diff --git a/arch/x86/vdso/vdso32/int80.S b/arch/x86/entry/vdso/vdso32/int80.S
similarity index 100%
rename from arch/x86/vdso/vdso32/int80.S
rename to arch/x86/entry/vdso/vdso32/int80.S
diff --git a/arch/x86/vdso/vdso32/note.S b/arch/x86/entry/vdso/vdso32/note.S
similarity index 100%
rename from arch/x86/vdso/vdso32/note.S
rename to arch/x86/entry/vdso/vdso32/note.S
diff --git a/arch/x86/vdso/vdso32/sigreturn.S b/arch/x86/entry/vdso/vdso32/sigreturn.S
similarity index 100%
rename from arch/x86/vdso/vdso32/sigreturn.S
rename to arch/x86/entry/vdso/vdso32/sigreturn.S
diff --git a/arch/x86/vdso/vdso32/syscall.S b/arch/x86/entry/vdso/vdso32/syscall.S
similarity index 100%
rename from arch/x86/vdso/vdso32/syscall.S
rename to arch/x86/entry/vdso/vdso32/syscall.S
diff --git a/arch/x86/vdso/vdso32/sysenter.S b/arch/x86/entry/vdso/vdso32/sysenter.S
similarity index 100%
rename from arch/x86/vdso/vdso32/sysenter.S
rename to arch/x86/entry/vdso/vdso32/sysenter.S
diff --git a/arch/x86/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
similarity index 100%
rename from arch/x86/vdso/vdso32/vclock_gettime.c
rename to arch/x86/entry/vdso/vdso32/vclock_gettime.c
diff --git a/arch/x86/vdso/vdso32/vdso-fakesections.c b/arch/x86/entry/vdso/vdso32/vdso-fakesections.c
similarity index 100%
rename from arch/x86/vdso/vdso32/vdso-fakesections.c
rename to arch/x86/entry/vdso/vdso32/vdso-fakesections.c
diff --git a/arch/x86/vdso/vdso32/vdso32.lds.S b/arch/x86/entry/vdso/vdso32/vdso32.lds.S
similarity index 100%
rename from arch/x86/vdso/vdso32/vdso32.lds.S
rename to arch/x86/entry/vdso/vdso32/vdso32.lds.S
diff --git a/arch/x86/vdso/vdsox32.lds.S b/arch/x86/entry/vdso/vdsox32.lds.S
similarity index 100%
rename from arch/x86/vdso/vdsox32.lds.S
rename to arch/x86/entry/vdso/vdsox32.lds.S
diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/entry/vdso/vgetcpu.c
similarity index 100%
rename from arch/x86/vdso/vgetcpu.c
rename to arch/x86/entry/vdso/vgetcpu.c
diff --git a/arch/x86/vdso/vma.c b/arch/x86/entry/vdso/vma.c
similarity index 100%
rename from arch/x86/vdso/vma.c
rename to arch/x86/entry/vdso/vma.c
diff --git a/arch/x86/entry/vsyscall/Makefile b/arch/x86/entry/vsyscall/Makefile
new file mode 100644
index 0000000..a9f4856
--- /dev/null
+++ b/arch/x86/entry/vsyscall/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the x86 low level vsyscall code
+#
+obj-y := vsyscall_gtod.o
+
+obj-$(CONFIG_X86_VSYSCALL_EMULATION) += vsyscall_64.o vsyscall_emu_64.o
+
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
similarity index 100%
rename from arch/x86/kernel/vsyscall_64.c
rename to arch/x86/entry/vsyscall/vsyscall_64.c
diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/entry/vsyscall/vsyscall_emu_64.S
similarity index 100%
rename from arch/x86/kernel/vsyscall_emu_64.S
rename to arch/x86/entry/vsyscall/vsyscall_emu_64.S
diff --git a/arch/x86/kernel/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c
similarity index 100%
rename from arch/x86/kernel/vsyscall_gtod.c
rename to arch/x86/entry/vsyscall/vsyscall_gtod.c
diff --git a/arch/x86/kernel/vsyscall_trace.h b/arch/x86/entry/vsyscall/vsyscall_trace.h
similarity index 89%
rename from arch/x86/kernel/vsyscall_trace.h
rename to arch/x86/entry/vsyscall/vsyscall_trace.h
index a8b2ede..9dd7359 100644
--- a/arch/x86/kernel/vsyscall_trace.h
+++ b/arch/x86/entry/vsyscall/vsyscall_trace.h
@@ -24,6 +24,6 @@
#endif
#undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
+#define TRACE_INCLUDE_PATH ../../arch/x86/entry/vsyscall/
#define TRACE_INCLUDE_FILE vsyscall_trace
#include <trace/define_trace.h>
diff --git a/arch/x86/ia32/Makefile b/arch/x86/ia32/Makefile
index bb635c6..cd4339b 100644
--- a/arch/x86/ia32/Makefile
+++ b/arch/x86/ia32/Makefile
@@ -2,7 +2,7 @@
# Makefile for the ia32 kernel emulation subsystem.
#
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
deleted file mode 100644
index 72bf268..0000000
--- a/arch/x86/ia32/ia32entry.S
+++ /dev/null
@@ -1,611 +0,0 @@
-/*
- * Compatibility mode system call entry point for x86-64.
- *
- * Copyright 2000-2002 Andi Kleen, SuSE Labs.
- */
-
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/current.h>
-#include <asm/errno.h>
-#include <asm/ia32_unistd.h>
-#include <asm/thread_info.h>
-#include <asm/segment.h>
-#include <asm/irqflags.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-#include <linux/linkage.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE 0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit ia32_ret_from_sys_call
-#define sysretl_audit ia32_ret_from_sys_call
-#endif
-
- .section .entry.text, "ax"
-
- /* clobbers %rax */
- .macro CLEAR_RREGS _r9=rax
- xorl %eax,%eax
- movq %rax,R11(%rsp)
- movq %rax,R10(%rsp)
- movq %\_r9,R9(%rsp)
- movq %rax,R8(%rsp)
- .endm
-
- /*
- * Reload arg registers from stack in case ptrace changed them.
- * We don't reload %eax because syscall_trace_enter() returned
- * the %rax value we should see. Instead, we just truncate that
- * value to 32 bits again as we did on entry from user mode.
- * If it's a new value set by user_regset during entry tracing,
- * this matches the normal truncation of the user-mode value.
- * If it's -1 to make us punt the syscall, then (u32)-1 is still
- * an appropriately invalid value.
- */
- .macro LOAD_ARGS32 _r9=0
- .if \_r9
- movl R9(%rsp),%r9d
- .endif
- movl RCX(%rsp),%ecx
- movl RDX(%rsp),%edx
- movl RSI(%rsp),%esi
- movl RDI(%rsp),%edi
- movl %eax,%eax /* zero extension */
- .endm
-
- .macro CFI_STARTPROC32 simple
- CFI_STARTPROC \simple
- CFI_UNDEFINED r8
- CFI_UNDEFINED r9
- CFI_UNDEFINED r10
- CFI_UNDEFINED r11
- CFI_UNDEFINED r12
- CFI_UNDEFINED r13
- CFI_UNDEFINED r14
- CFI_UNDEFINED r15
- .endm
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret32)
- swapgs
- sysretl
-ENDPROC(native_usergs_sysret32)
-
-ENTRY(native_irq_enable_sysexit)
- swapgs
- sti
- sysexit
-ENDPROC(native_irq_enable_sysexit)
-#endif
-
-/*
- * 32bit SYSENTER instruction entry.
- *
- * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
- * IF and VM in rflags are cleared (IOW: interrupts are off).
- * SYSENTER does not save anything on the stack,
- * and does not save old rip (!!!) and rflags.
- *
- * Arguments:
- * eax system call number
- * ebx arg1
- * ecx arg2
- * edx arg3
- * esi arg4
- * edi arg5
- * ebp user stack
- * 0(%ebp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_sysenter_target)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rsp,rbp
-
- /*
- * Interrupts are off on entry.
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- SWAPGS_UNSAFE_STACK
- movq PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
- ENABLE_INTERRUPTS(CLBR_NONE)
-
- /* Zero-extending 32-bit regs, do not remove */
- movl %ebp, %ebp
- movl %eax, %eax
-
- movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
- CFI_REGISTER rip,r10
-
- /* Construct struct pt_regs on stack */
- pushq_cfi $__USER32_DS /* pt_regs->ss */
- pushq_cfi %rbp /* pt_regs->sp */
- CFI_REL_OFFSET rsp,0
- pushfq_cfi /* pt_regs->flags */
- pushq_cfi $__USER32_CS /* pt_regs->cs */
- pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi_reg rax /* pt_regs->ax */
- cld
- sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
-
- /*
- * no need to do an access_ok check here because rbp has been
- * 32bit zero extended
- */
- ASM_STAC
-1: movl (%rbp),%ebp
- _ASM_EXTABLE(1b,ia32_badarg)
- ASM_CLAC
-
- /*
- * Sysenter doesn't filter flags, so we need to clear NT
- * ourselves. To save a few cycles, we can check whether
- * NT was set instead of doing an unconditional popfq.
- */
- testl $X86_EFLAGS_NT,EFLAGS(%rsp)
- jnz sysenter_fix_flags
-sysenter_flags_fixed:
-
- orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- CFI_REMEMBER_STATE
- jnz sysenter_tracesys
- cmpq $(IA32_NR_syscalls-1),%rax
- ja ia32_badsys
-sysenter_do_call:
- /* 32bit syscall -> 64bit C ABI argument conversion */
- movl %edi,%r8d /* arg5 */
- movl %ebp,%r9d /* arg6 */
- xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
- movl %ebx,%edi /* arg1 */
- movl %edx,%edx /* arg3 (zero extension) */
-sysenter_dispatch:
- call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX(%rsp)
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz sysexit_audit
-sysexit_from_sys_call:
- /*
- * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
- * NMI between STI and SYSEXIT has poorly specified behavior,
- * and and NMI followed by an IRQ with usergs is fatal. So
- * we just pretend we're using SYSEXIT but we really use
- * SYSRETL instead.
- *
- * This code path is still called 'sysexit' because it pairs
- * with 'sysenter' and it uses the SYSENTER calling convention.
- */
- andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
- movl RIP(%rsp),%ecx /* User %eip */
- CFI_REGISTER rip,rcx
- RESTORE_RSI_RDI
- xorl %edx,%edx /* avoid info leaks */
- xorq %r8,%r8
- xorq %r9,%r9
- xorq %r10,%r10
- movl EFLAGS(%rsp),%r11d /* User eflags */
- /*CFI_RESTORE rflags*/
- TRACE_IRQS_ON
-
- /*
- * SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT,
- * since it avoids a dicey window with interrupts enabled.
- */
- movl RSP(%rsp),%esp
-
- /*
- * USERGS_SYSRET32 does:
- * gsbase = user's gs base
- * eip = ecx
- * rflags = r11
- * cs = __USER32_CS
- * ss = __USER_DS
- *
- * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
- *
- * pop %ebp
- * pop %edx
- * pop %ecx
- *
- * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
- * avoid info leaks. R11 ends up with VDSO32_SYSENTER_RETURN's
- * address (already known to user code), and R12-R15 are
- * callee-saved and therefore don't contain any interesting
- * kernel data.
- */
- USERGS_SYSRET32
-
- CFI_RESTORE_STATE
-
-#ifdef CONFIG_AUDITSYSCALL
- .macro auditsys_entry_common
- movl %esi,%r8d /* 5th arg: 4th syscall arg */
- movl %ecx,%r9d /*swap with edx*/
- movl %edx,%ecx /* 4th arg: 3rd syscall arg */
- movl %r9d,%edx /* 3rd arg: 2nd syscall arg */
- movl %ebx,%esi /* 2nd arg: 1st syscall arg */
- movl %eax,%edi /* 1st arg: syscall number */
- call __audit_syscall_entry
- movl RAX(%rsp),%eax /* reload syscall number */
- cmpq $(IA32_NR_syscalls-1),%rax
- ja ia32_badsys
- movl %ebx,%edi /* reload 1st syscall arg */
- movl RCX(%rsp),%esi /* reload 2nd syscall arg */
- movl RDX(%rsp),%edx /* reload 3rd syscall arg */
- movl RSI(%rsp),%ecx /* reload 4th syscall arg */
- movl RDI(%rsp),%r8d /* reload 5th syscall arg */
- .endm
-
- .macro auditsys_exit exit
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz ia32_ret_from_sys_call
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- movl %eax,%esi /* second arg, syscall return value */
- cmpl $-MAX_ERRNO,%eax /* is it an error ? */
- jbe 1f
- movslq %eax, %rsi /* if error sign extend to 64 bits */
-1: setbe %al /* 1 if error, 0 if not */
- movzbl %al,%edi /* zero-extend that into %edi */
- call __audit_syscall_exit
- movq RAX(%rsp),%rax /* reload syscall return value */
- movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jz \exit
- CLEAR_RREGS
- jmp int_with_check
- .endm
-
-sysenter_auditsys:
- auditsys_entry_common
- movl %ebp,%r9d /* reload 6th syscall arg */
- jmp sysenter_dispatch
-
-sysexit_audit:
- auditsys_exit sysexit_from_sys_call
-#endif
-
-sysenter_fix_flags:
- pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
- popfq_cfi
- jmp sysenter_flags_fixed
-
-sysenter_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jz sysenter_auditsys
-#endif
- SAVE_EXTRA_REGS
- CLEAR_RREGS
- movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
- movq %rsp,%rdi /* &pt_regs -> arg1 */
- call syscall_trace_enter
- LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
- RESTORE_EXTRA_REGS
- cmpq $(IA32_NR_syscalls-1),%rax
- ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
- jmp sysenter_do_call
- CFI_ENDPROC
-ENDPROC(ia32_sysenter_target)
-
-/*
- * 32bit SYSCALL instruction entry.
- *
- * 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Note: rflags saving+masking-with-MSR happens only in Long mode
- * (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it).
- * Don't get confused: rflags saving+masking depends on Long Mode Active bit
- * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
- * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
- *
- * Arguments:
- * eax system call number
- * ecx return address
- * ebx arg1
- * ebp arg2 (note: not saved in the stack frame, should not be touched)
- * edx arg3
- * esi arg4
- * edi arg5
- * esp user stack
- * 0(%esp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_cstar_target)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rip,rcx
- /*CFI_REGISTER rflags,r11*/
-
- /*
- * Interrupts are off on entry.
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- SWAPGS_UNSAFE_STACK
- movl %esp,%r8d
- CFI_REGISTER rsp,r8
- movq PER_CPU_VAR(kernel_stack),%rsp
- ENABLE_INTERRUPTS(CLBR_NONE)
-
- /* Zero-extending 32-bit regs, do not remove */
- movl %eax,%eax
-
- /* Construct struct pt_regs on stack */
- pushq_cfi $__USER32_DS /* pt_regs->ss */
- pushq_cfi %r8 /* pt_regs->sp */
- CFI_REL_OFFSET rsp,0
- pushq_cfi %r11 /* pt_regs->flags */
- pushq_cfi $__USER32_CS /* pt_regs->cs */
- pushq_cfi %rcx /* pt_regs->ip */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rbp /* pt_regs->cx */
- movl %ebp,%ecx
- pushq_cfi_reg rax /* pt_regs->ax */
- sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
-
- /*
- * no need to do an access_ok check here because r8 has been
- * 32bit zero extended
- */
- ASM_STAC
-1: movl (%r8),%r9d
- _ASM_EXTABLE(1b,ia32_badarg)
- ASM_CLAC
- orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- CFI_REMEMBER_STATE
- jnz cstar_tracesys
- cmpq $IA32_NR_syscalls-1,%rax
- ja ia32_badsys
-cstar_do_call:
- /* 32bit syscall -> 64bit C ABI argument conversion */
- movl %edi,%r8d /* arg5 */
- /* r9 already loaded */ /* arg6 */
- xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
- movl %ebx,%edi /* arg1 */
- movl %edx,%edx /* arg3 (zero extension) */
-cstar_dispatch:
- call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX(%rsp)
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz sysretl_audit
-sysretl_from_sys_call:
- andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
- RESTORE_RSI_RDI_RDX
- movl RIP(%rsp),%ecx
- CFI_REGISTER rip,rcx
- movl EFLAGS(%rsp),%r11d
- /*CFI_REGISTER rflags,r11*/
- xorq %r10,%r10
- xorq %r9,%r9
- xorq %r8,%r8
- TRACE_IRQS_ON
- movl RSP(%rsp),%esp
- CFI_RESTORE rsp
- /*
- * 64bit->32bit SYSRET restores eip from ecx,
- * eflags from r11 (but RF and VM bits are forced to 0),
- * cs and ss are loaded from MSRs.
- * (Note: 32bit->32bit SYSRET is different: since r11
- * does not exist, it merely sets eflags.IF=1).
- *
- * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
- * descriptor is not reinitialized. This means that we must
- * avoid SYSRET with SS == NULL, which could happen if we schedule,
- * exit the kernel, and re-enter using an interrupt vector. (All
- * interrupt entries on x86_64 set SS to NULL.) We prevent that
- * from happening by reloading SS in __switch_to.
- */
- USERGS_SYSRET32
-
-#ifdef CONFIG_AUDITSYSCALL
-cstar_auditsys:
- CFI_RESTORE_STATE
- movl %r9d,R9(%rsp) /* register to be clobbered by call */
- auditsys_entry_common
- movl R9(%rsp),%r9d /* reload 6th syscall arg */
- jmp cstar_dispatch
-
-sysretl_audit:
- auditsys_exit sysretl_from_sys_call
-#endif
-
-cstar_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jz cstar_auditsys
-#endif
- xchgl %r9d,%ebp
- SAVE_EXTRA_REGS
- CLEAR_RREGS r9
- movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
- movq %rsp,%rdi /* &pt_regs -> arg1 */
- call syscall_trace_enter
- LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */
- RESTORE_EXTRA_REGS
- xchgl %ebp,%r9d
- cmpq $(IA32_NR_syscalls-1),%rax
- ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
- jmp cstar_do_call
-END(ia32_cstar_target)
-
-ia32_badarg:
- ASM_CLAC
- movq $-EFAULT,%rax
- jmp ia32_sysret
- CFI_ENDPROC
-
-/*
- * Emulated IA32 system calls via int 0x80.
- *
- * Arguments:
- * eax system call number
- * ebx arg1
- * ecx arg2
- * edx arg3
- * esi arg4
- * edi arg5
- * ebp arg6 (note: not saved in the stack frame, should not be touched)
- *
- * Notes:
- * Uses the same stack frame as the x86-64 version.
- * All registers except eax must be saved (but ptrace may violate that).
- * Arguments are zero extended. For system calls that want sign extension and
- * take long arguments a wrapper is needed. Most calls can just be called
- * directly.
- * Assumes it is only called from user space and entered with interrupts off.
- */
-
-ENTRY(ia32_syscall)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,5*8
- /*CFI_REL_OFFSET ss,4*8 */
- CFI_REL_OFFSET rsp,3*8
- /*CFI_REL_OFFSET rflags,2*8 */
- /*CFI_REL_OFFSET cs,1*8 */
- CFI_REL_OFFSET rip,0*8
-
- /*
- * Interrupts are off on entry.
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- SWAPGS
- ENABLE_INTERRUPTS(CLBR_NONE)
-
- /* Zero-extending 32-bit regs, do not remove */
- movl %eax,%eax
-
- /* Construct struct pt_regs on stack (iret frame is already on stack) */
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi_reg rax /* pt_regs->ax */
- cld
- sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
-
- orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz ia32_tracesys
- cmpq $(IA32_NR_syscalls-1),%rax
- ja ia32_badsys
-ia32_do_call:
- /* 32bit syscall -> 64bit C ABI argument conversion */
- movl %edi,%r8d /* arg5 */
- movl %ebp,%r9d /* arg6 */
- xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
- movl %ebx,%edi /* arg1 */
- movl %edx,%edx /* arg3 (zero extension) */
- call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
-ia32_sysret:
- movq %rax,RAX(%rsp)
-ia32_ret_from_sys_call:
- CLEAR_RREGS
- jmp int_ret_from_sys_call
-
-ia32_tracesys:
- SAVE_EXTRA_REGS
- CLEAR_RREGS
- movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
- movq %rsp,%rdi /* &pt_regs -> arg1 */
- call syscall_trace_enter
- LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
- RESTORE_EXTRA_REGS
- cmpq $(IA32_NR_syscalls-1),%rax
- ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
- jmp ia32_do_call
-END(ia32_syscall)
-
-ia32_badsys:
- movq $0,ORIG_RAX(%rsp)
- movq $-ENOSYS,%rax
- jmp ia32_sysret
-
- CFI_ENDPROC
-
- .macro PTREGSCALL label, func
- ALIGN
-GLOBAL(\label)
- leaq \func(%rip),%rax
- jmp ia32_ptregs_common
- .endm
-
- CFI_STARTPROC32
-
- PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
- PTREGSCALL stub32_sigreturn, sys32_sigreturn
- PTREGSCALL stub32_fork, sys_fork
- PTREGSCALL stub32_vfork, sys_vfork
-
- ALIGN
-GLOBAL(stub32_clone)
- leaq sys_clone(%rip),%rax
- mov %r8, %rcx
- jmp ia32_ptregs_common
-
- ALIGN
-ia32_ptregs_common:
- CFI_ENDPROC
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SIZEOF_PTREGS
- CFI_REL_OFFSET rax,RAX
- CFI_REL_OFFSET rcx,RCX
- CFI_REL_OFFSET rdx,RDX
- CFI_REL_OFFSET rsi,RSI
- CFI_REL_OFFSET rdi,RDI
- CFI_REL_OFFSET rip,RIP
-/* CFI_REL_OFFSET cs,CS*/
-/* CFI_REL_OFFSET rflags,EFLAGS*/
- CFI_REL_OFFSET rsp,RSP
-/* CFI_REL_OFFSET ss,SS*/
- SAVE_EXTRA_REGS 8
- call *%rax
- RESTORE_EXTRA_REGS 8
- ret
- CFI_ENDPROC
-END(ia32_ptregs_common)
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index bdf02ee..e7636ba 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -18,6 +18,12 @@
.endm
#endif
+/*
+ * Issue one struct alt_instr descriptor entry (need to put it into
+ * the section .altinstructions, see below). This entry contains
+ * enough information for the alternatives patching code to patch an
+ * instruction. See apply_alternatives().
+ */
.macro altinstruction_entry orig alt feature orig_len alt_len pad_len
.long \orig - .
.long \alt - .
@@ -27,6 +33,12 @@
.byte \pad_len
.endm
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
.macro ALTERNATIVE oldinstr, newinstr, feature
140:
\oldinstr
@@ -55,6 +67,12 @@
*/
#define alt_max_short(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
+
+/*
+ * Same as ALTERNATIVE macro above but for two alternatives. If CPU
+ * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
+ * @feature2, it replaces @oldinstr with @feature2.
+ */
.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
140:
\oldinstr
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 976b86a..c839363 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -644,6 +644,12 @@
entering_irq();
}
+static inline void ipi_entering_ack_irq(void)
+{
+ ack_APIC_irq();
+ irq_enter();
+}
+
static inline void exiting_irq(void)
{
irq_exit();
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 7730c1c..189679a 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -63,6 +63,31 @@
_ASM_ALIGN ; \
_ASM_PTR (entry); \
.popsection
+
+.macro ALIGN_DESTINATION
+ /* check for bad alignment of destination */
+ movl %edi,%ecx
+ andl $7,%ecx
+ jz 102f /* already aligned */
+ subl $8,%ecx
+ negl %ecx
+ subl %ecx,%edx
+100: movb (%rsi),%al
+101: movb %al,(%rdi)
+ incq %rsi
+ incq %rdi
+ decl %ecx
+ jnz 100b
+102:
+ .section .fixup,"ax"
+103: addl %ecx,%edx /* ecx is zerorest also */
+ jmp copy_user_handle_tail
+ .previous
+
+ _ASM_EXTABLE(100b,103b)
+ _ASM_EXTABLE(101b,103b)
+ .endm
+
#else
# define _ASM_EXTABLE(from,to) \
" .pushsection \"__ex_table\",\"a\"\n" \
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index 5e5cd12..e916895 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -22,7 +22,7 @@
*
* Atomically reads the value of @v.
*/
-static inline int atomic_read(const atomic_t *v)
+static __always_inline int atomic_read(const atomic_t *v)
{
return ACCESS_ONCE((v)->counter);
}
@@ -34,7 +34,7 @@
*
* Atomically sets the value of @v to @i.
*/
-static inline void atomic_set(atomic_t *v, int i)
+static __always_inline void atomic_set(atomic_t *v, int i)
{
v->counter = i;
}
@@ -46,7 +46,7 @@
*
* Atomically adds @i to @v.
*/
-static inline void atomic_add(int i, atomic_t *v)
+static __always_inline void atomic_add(int i, atomic_t *v)
{
asm volatile(LOCK_PREFIX "addl %1,%0"
: "+m" (v->counter)
@@ -60,7 +60,7 @@
*
* Atomically subtracts @i from @v.
*/
-static inline void atomic_sub(int i, atomic_t *v)
+static __always_inline void atomic_sub(int i, atomic_t *v)
{
asm volatile(LOCK_PREFIX "subl %1,%0"
: "+m" (v->counter)
@@ -76,7 +76,7 @@
* true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic_sub_and_test(int i, atomic_t *v)
+static __always_inline int atomic_sub_and_test(int i, atomic_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e");
}
@@ -87,7 +87,7 @@
*
* Atomically increments @v by 1.
*/
-static inline void atomic_inc(atomic_t *v)
+static __always_inline void atomic_inc(atomic_t *v)
{
asm volatile(LOCK_PREFIX "incl %0"
: "+m" (v->counter));
@@ -99,7 +99,7 @@
*
* Atomically decrements @v by 1.
*/
-static inline void atomic_dec(atomic_t *v)
+static __always_inline void atomic_dec(atomic_t *v)
{
asm volatile(LOCK_PREFIX "decl %0"
: "+m" (v->counter));
@@ -113,7 +113,7 @@
* returns true if the result is 0, or false for all other
* cases.
*/
-static inline int atomic_dec_and_test(atomic_t *v)
+static __always_inline int atomic_dec_and_test(atomic_t *v)
{
GEN_UNARY_RMWcc(LOCK_PREFIX "decl", v->counter, "%0", "e");
}
@@ -126,7 +126,7 @@
* and returns true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic_inc_and_test(atomic_t *v)
+static __always_inline int atomic_inc_and_test(atomic_t *v)
{
GEN_UNARY_RMWcc(LOCK_PREFIX "incl", v->counter, "%0", "e");
}
@@ -140,7 +140,7 @@
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static inline int atomic_add_negative(int i, atomic_t *v)
+static __always_inline int atomic_add_negative(int i, atomic_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s");
}
@@ -152,7 +152,7 @@
*
* Atomically adds @i to @v and returns @i + @v
*/
-static inline int atomic_add_return(int i, atomic_t *v)
+static __always_inline int atomic_add_return(int i, atomic_t *v)
{
return i + xadd(&v->counter, i);
}
@@ -164,7 +164,7 @@
*
* Atomically subtracts @i from @v and returns @v - @i
*/
-static inline int atomic_sub_return(int i, atomic_t *v)
+static __always_inline int atomic_sub_return(int i, atomic_t *v)
{
return atomic_add_return(-i, v);
}
@@ -172,7 +172,7 @@
#define atomic_inc_return(v) (atomic_add_return(1, v))
#define atomic_dec_return(v) (atomic_sub_return(1, v))
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
return cmpxchg(&v->counter, old, new);
}
@@ -191,7 +191,7 @@
* Atomically adds @a to @v, so long as @v was not already @u.
* Returns the old value of @v.
*/
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+static __always_inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
@@ -213,7 +213,7 @@
* Atomically adds 1 to @v
* Returns the new value of @u
*/
-static inline short int atomic_inc_short(short int *v)
+static __always_inline short int atomic_inc_short(short int *v)
{
asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
return *v;
diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h
index f8d273e..b965f9e 100644
--- a/arch/x86/include/asm/atomic64_64.h
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -40,7 +40,7 @@
*
* Atomically adds @i to @v.
*/
-static inline void atomic64_add(long i, atomic64_t *v)
+static __always_inline void atomic64_add(long i, atomic64_t *v)
{
asm volatile(LOCK_PREFIX "addq %1,%0"
: "=m" (v->counter)
@@ -81,7 +81,7 @@
*
* Atomically increments @v by 1.
*/
-static inline void atomic64_inc(atomic64_t *v)
+static __always_inline void atomic64_inc(atomic64_t *v)
{
asm volatile(LOCK_PREFIX "incq %0"
: "=m" (v->counter)
@@ -94,7 +94,7 @@
*
* Atomically decrements @v by 1.
*/
-static inline void atomic64_dec(atomic64_t *v)
+static __always_inline void atomic64_dec(atomic64_t *v)
{
asm volatile(LOCK_PREFIX "decq %0"
: "=m" (v->counter)
@@ -148,7 +148,7 @@
*
* Atomically adds @i to @v and returns @i + @v
*/
-static inline long atomic64_add_return(long i, atomic64_t *v)
+static __always_inline long atomic64_add_return(long i, atomic64_t *v)
{
return i + xadd(&v->counter, i);
}
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 47c8e32..b6f7457 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -8,7 +8,7 @@
/*
* The set_memory_* API can be used to change various attributes of a virtual
* address range. The attributes include:
- * Cachability : UnCached, WriteCombining, WriteBack
+ * Cachability : UnCached, WriteCombining, WriteThrough, WriteBack
* Executability : eXeutable, NoteXecutable
* Read/Write : ReadOnly, ReadWrite
* Presence : NotPresent
@@ -35,9 +35,11 @@
int _set_memory_uc(unsigned long addr, int numpages);
int _set_memory_wc(unsigned long addr, int numpages);
+int _set_memory_wt(unsigned long addr, int numpages);
int _set_memory_wb(unsigned long addr, int numpages);
int set_memory_uc(unsigned long addr, int numpages);
int set_memory_wc(unsigned long addr, int numpages);
+int set_memory_wt(unsigned long addr, int numpages);
int set_memory_wb(unsigned long addr, int numpages);
int set_memory_x(unsigned long addr, int numpages);
int set_memory_nx(unsigned long addr, int numpages);
@@ -48,10 +50,12 @@
int set_memory_array_uc(unsigned long *addr, int addrinarray);
int set_memory_array_wc(unsigned long *addr, int addrinarray);
+int set_memory_array_wt(unsigned long *addr, int addrinarray);
int set_memory_array_wb(unsigned long *addr, int addrinarray);
int set_pages_array_uc(struct page **pages, int addrinarray);
int set_pages_array_wc(struct page **pages, int addrinarray);
+int set_pages_array_wt(struct page **pages, int addrinarray);
int set_pages_array_wb(struct page **pages, int addrinarray);
/*
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
deleted file mode 100644
index de1cdaf..0000000
--- a/arch/x86/include/asm/dwarf2.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef _ASM_X86_DWARF2_H
-#define _ASM_X86_DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
-#define CFI_ESCAPE .cfi_escape
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
- /*
- * Emit CFI data in .debug_frame sections, not .eh_frame sections.
- * The latter we currently just discard since we don't do DWARF
- * unwinding at runtime. So only the offline DWARF information is
- * useful to anyone. Note we should not use this directive if this
- * file is used in the vDSO assembly, or if vmlinux.lds.S gets
- * changed so it doesn't discard .eh_frame.
- */
- .cfi_sections .debug_frame
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC cfi_ignore
-#define CFI_ENDPROC cfi_ignore
-#define CFI_DEF_CFA cfi_ignore
-#define CFI_DEF_CFA_REGISTER cfi_ignore
-#define CFI_DEF_CFA_OFFSET cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET cfi_ignore
-#define CFI_OFFSET cfi_ignore
-#define CFI_REL_OFFSET cfi_ignore
-#define CFI_REGISTER cfi_ignore
-#define CFI_RESTORE cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_ESCAPE cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
-
-#endif
-
-/*
- * An attempt to make CFI annotations more or less
- * correct and shorter. It is implied that you know
- * what you're doing if you use them.
- */
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_X86_64
- .macro pushq_cfi reg
- pushq \reg
- CFI_ADJUST_CFA_OFFSET 8
- .endm
-
- .macro pushq_cfi_reg reg
- pushq %\reg
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET \reg, 0
- .endm
-
- .macro popq_cfi reg
- popq \reg
- CFI_ADJUST_CFA_OFFSET -8
- .endm
-
- .macro popq_cfi_reg reg
- popq %\reg
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE \reg
- .endm
-
- .macro pushfq_cfi
- pushfq
- CFI_ADJUST_CFA_OFFSET 8
- .endm
-
- .macro popfq_cfi
- popfq
- CFI_ADJUST_CFA_OFFSET -8
- .endm
-
- .macro movq_cfi reg offset=0
- movq %\reg, \offset(%rsp)
- CFI_REL_OFFSET \reg, \offset
- .endm
-
- .macro movq_cfi_restore offset reg
- movq \offset(%rsp), %\reg
- CFI_RESTORE \reg
- .endm
-#else /*!CONFIG_X86_64*/
- .macro pushl_cfi reg
- pushl \reg
- CFI_ADJUST_CFA_OFFSET 4
- .endm
-
- .macro pushl_cfi_reg reg
- pushl %\reg
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET \reg, 0
- .endm
-
- .macro popl_cfi reg
- popl \reg
- CFI_ADJUST_CFA_OFFSET -4
- .endm
-
- .macro popl_cfi_reg reg
- popl %\reg
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE \reg
- .endm
-
- .macro pushfl_cfi
- pushfl
- CFI_ADJUST_CFA_OFFSET 4
- .endm
-
- .macro popfl_cfi
- popfl
- CFI_ADJUST_CFA_OFFSET -4
- .endm
-
- .macro movl_cfi reg offset=0
- movl %\reg, \offset(%esp)
- CFI_REL_OFFSET \reg, \offset
- .endm
-
- .macro movl_cfi_restore offset reg
- movl \offset(%esp), %\reg
- CFI_RESTORE \reg
- .endm
-#endif /*!CONFIG_X86_64*/
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index dc5fa66..df00299 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -23,6 +23,8 @@
#ifdef CONFIG_HAVE_KVM
BUILD_INTERRUPT3(kvm_posted_intr_ipi, POSTED_INTR_VECTOR,
smp_kvm_posted_intr_ipi)
+BUILD_INTERRUPT3(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR,
+ smp_kvm_posted_intr_wakeup_ipi)
#endif
/*
@@ -50,4 +52,7 @@
BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
#endif
+#ifdef CONFIG_X86_MCE_AMD
+BUILD_INTERRUPT(deferred_error_interrupt, DEFERRED_ERROR_VECTOR)
+#endif
#endif
diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h
index 3b629f4..793179c 100644
--- a/arch/x86/include/asm/frame.h
+++ b/arch/x86/include/asm/frame.h
@@ -1,20 +1,17 @@
#ifdef __ASSEMBLY__
#include <asm/asm.h>
-#include <asm/dwarf2.h>
/* The annotation hides the frame from the unwinder and makes it look
like a ordinary ebp save/restore. This avoids some special cases for
frame pointer later */
#ifdef CONFIG_FRAME_POINTER
.macro FRAME
- __ASM_SIZE(push,_cfi) %__ASM_REG(bp)
- CFI_REL_OFFSET __ASM_REG(bp), 0
+ __ASM_SIZE(push,) %__ASM_REG(bp)
__ASM_SIZE(mov) %__ASM_REG(sp), %__ASM_REG(bp)
.endm
.macro ENDFRAME
- __ASM_SIZE(pop,_cfi) %__ASM_REG(bp)
- CFI_RESTORE __ASM_REG(bp)
+ __ASM_SIZE(pop,) %__ASM_REG(bp)
.endm
#else
.macro FRAME
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 0f5fb6b..7178043 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -14,6 +14,7 @@
#endif
#ifdef CONFIG_HAVE_KVM
unsigned int kvm_posted_intr_ipis;
+ unsigned int kvm_posted_intr_wakeup_ipis;
#endif
unsigned int x86_platform_ipis; /* arch dependent */
unsigned int apic_perf_irqs;
@@ -33,6 +34,9 @@
#ifdef CONFIG_X86_MCE_THRESHOLD
unsigned int irq_threshold_count;
#endif
+#ifdef CONFIG_X86_MCE_AMD
+ unsigned int irq_deferred_error_count;
+#endif
#if IS_ENABLED(CONFIG_HYPERV) || defined(CONFIG_XEN)
unsigned int irq_hv_callback_count;
#endif
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 36f7125..5fa9fb0 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -74,20 +74,16 @@
extern void force_hpet_resume(void);
struct irq_data;
+struct hpet_dev;
+struct irq_domain;
+
extern void hpet_msi_unmask(struct irq_data *data);
extern void hpet_msi_mask(struct irq_data *data);
-struct hpet_dev;
extern void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg);
extern void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg);
-
-#ifdef CONFIG_PCI_MSI
-extern int default_setup_hpet_msi(unsigned int irq, unsigned int id);
-#else
-static inline int default_setup_hpet_msi(unsigned int irq, unsigned int id)
-{
- return -EINVAL;
-}
-#endif
+extern struct irq_domain *hpet_create_irq_domain(int hpet_id);
+extern int hpet_assign_irq(struct irq_domain *domain,
+ struct hpet_dev *dev, int dev_num);
#ifdef CONFIG_HPET_EMULATE_RTC
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index e9571dd..6615032 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -29,6 +29,7 @@
extern asmlinkage void apic_timer_interrupt(void);
extern asmlinkage void x86_platform_ipi(void);
extern asmlinkage void kvm_posted_intr_ipi(void);
+extern asmlinkage void kvm_posted_intr_wakeup_ipi(void);
extern asmlinkage void error_interrupt(void);
extern asmlinkage void irq_work_interrupt(void);
@@ -36,43 +37,10 @@
extern asmlinkage void thermal_interrupt(void);
extern asmlinkage void reschedule_interrupt(void);
-extern asmlinkage void invalidate_interrupt(void);
-extern asmlinkage void invalidate_interrupt0(void);
-extern asmlinkage void invalidate_interrupt1(void);
-extern asmlinkage void invalidate_interrupt2(void);
-extern asmlinkage void invalidate_interrupt3(void);
-extern asmlinkage void invalidate_interrupt4(void);
-extern asmlinkage void invalidate_interrupt5(void);
-extern asmlinkage void invalidate_interrupt6(void);
-extern asmlinkage void invalidate_interrupt7(void);
-extern asmlinkage void invalidate_interrupt8(void);
-extern asmlinkage void invalidate_interrupt9(void);
-extern asmlinkage void invalidate_interrupt10(void);
-extern asmlinkage void invalidate_interrupt11(void);
-extern asmlinkage void invalidate_interrupt12(void);
-extern asmlinkage void invalidate_interrupt13(void);
-extern asmlinkage void invalidate_interrupt14(void);
-extern asmlinkage void invalidate_interrupt15(void);
-extern asmlinkage void invalidate_interrupt16(void);
-extern asmlinkage void invalidate_interrupt17(void);
-extern asmlinkage void invalidate_interrupt18(void);
-extern asmlinkage void invalidate_interrupt19(void);
-extern asmlinkage void invalidate_interrupt20(void);
-extern asmlinkage void invalidate_interrupt21(void);
-extern asmlinkage void invalidate_interrupt22(void);
-extern asmlinkage void invalidate_interrupt23(void);
-extern asmlinkage void invalidate_interrupt24(void);
-extern asmlinkage void invalidate_interrupt25(void);
-extern asmlinkage void invalidate_interrupt26(void);
-extern asmlinkage void invalidate_interrupt27(void);
-extern asmlinkage void invalidate_interrupt28(void);
-extern asmlinkage void invalidate_interrupt29(void);
-extern asmlinkage void invalidate_interrupt30(void);
-extern asmlinkage void invalidate_interrupt31(void);
-
extern asmlinkage void irq_move_cleanup_interrupt(void);
extern asmlinkage void reboot_interrupt(void);
extern asmlinkage void threshold_interrupt(void);
+extern asmlinkage void deferred_error_interrupt(void);
extern asmlinkage void call_function_interrupt(void);
extern asmlinkage void call_function_single_interrupt(void);
@@ -87,60 +55,93 @@
extern void trace_thermal_interrupt(void);
extern void trace_reschedule_interrupt(void);
extern void trace_threshold_interrupt(void);
+extern void trace_deferred_error_interrupt(void);
extern void trace_call_function_interrupt(void);
extern void trace_call_function_single_interrupt(void);
#define trace_irq_move_cleanup_interrupt irq_move_cleanup_interrupt
#define trace_reboot_interrupt reboot_interrupt
#define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi
+#define trace_kvm_posted_intr_wakeup_ipi kvm_posted_intr_wakeup_ipi
#endif /* CONFIG_TRACING */
-#ifdef CONFIG_IRQ_REMAP
-/* Intel specific interrupt remapping information */
-struct irq_2_iommu {
- struct intel_iommu *iommu;
- u16 irte_index;
- u16 sub_handle;
- u8 irte_mask;
-};
-
-/* AMD specific interrupt remapping information */
-struct irq_2_irte {
- u16 devid; /* Device ID for IRTE table */
- u16 index; /* Index into IRTE table*/
-};
-#endif /* CONFIG_IRQ_REMAP */
-
#ifdef CONFIG_X86_LOCAL_APIC
struct irq_data;
+struct pci_dev;
+struct msi_desc;
-struct irq_cfg {
- cpumask_var_t domain;
- cpumask_var_t old_domain;
- u8 vector;
- u8 move_in_progress : 1;
-#ifdef CONFIG_IRQ_REMAP
- u8 remapped : 1;
+enum irq_alloc_type {
+ X86_IRQ_ALLOC_TYPE_IOAPIC = 1,
+ X86_IRQ_ALLOC_TYPE_HPET,
+ X86_IRQ_ALLOC_TYPE_MSI,
+ X86_IRQ_ALLOC_TYPE_MSIX,
+ X86_IRQ_ALLOC_TYPE_DMAR,
+ X86_IRQ_ALLOC_TYPE_UV,
+};
+
+struct irq_alloc_info {
+ enum irq_alloc_type type;
+ u32 flags;
+ const struct cpumask *mask; /* CPU mask for vector allocation */
union {
- struct irq_2_iommu irq_2_iommu;
- struct irq_2_irte irq_2_irte;
- };
-#endif
- union {
-#ifdef CONFIG_X86_IO_APIC
+ int unused;
+#ifdef CONFIG_HPET_TIMER
struct {
- struct list_head irq_2_pin;
+ int hpet_id;
+ int hpet_index;
+ void *hpet_data;
+ };
+#endif
+#ifdef CONFIG_PCI_MSI
+ struct {
+ struct pci_dev *msi_dev;
+ irq_hw_number_t msi_hwirq;
+ };
+#endif
+#ifdef CONFIG_X86_IO_APIC
+ struct {
+ int ioapic_id;
+ int ioapic_pin;
+ int ioapic_node;
+ u32 ioapic_trigger : 1;
+ u32 ioapic_polarity : 1;
+ u32 ioapic_valid : 1;
+ struct IO_APIC_route_entry *ioapic_entry;
+ };
+#endif
+#ifdef CONFIG_DMAR_TABLE
+ struct {
+ int dmar_id;
+ void *dmar_data;
+ };
+#endif
+#ifdef CONFIG_HT_IRQ
+ struct {
+ int ht_pos;
+ int ht_idx;
+ struct pci_dev *ht_dev;
+ void *ht_update;
+ };
+#endif
+#ifdef CONFIG_X86_UV
+ struct {
+ int uv_limit;
+ int uv_blade;
+ unsigned long uv_offset;
+ char *uv_name;
};
#endif
};
};
+struct irq_cfg {
+ unsigned int dest_apicid;
+ u8 vector;
+};
+
extern struct irq_cfg *irq_cfg(unsigned int irq);
extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
-extern struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node);
extern void lock_vector_lock(void);
extern void unlock_vector_lock(void);
-extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
-extern void clear_irq_vector(int irq, struct irq_cfg *cfg);
extern void setup_vector_irq(int cpu);
#ifdef CONFIG_SMP
extern void send_cleanup_vector(struct irq_cfg *);
@@ -150,10 +151,7 @@
static inline void irq_complete_move(struct irq_cfg *c) { }
#endif
-extern int apic_retrigger_irq(struct irq_data *data);
extern void apic_ack_edge(struct irq_data *data);
-extern int apic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- unsigned int *dest_id);
#else /* CONFIG_X86_LOCAL_APIC */
static inline void lock_vector_lock(void) {}
static inline void unlock_vector_lock(void) {}
@@ -163,8 +161,7 @@
extern atomic_t irq_err_count;
extern atomic_t irq_mis_count;
-/* EISA */
-extern void eisa_set_level_irq(unsigned int irq);
+extern void elcr_set_level_irq(unsigned int irq);
/* SMP */
extern __visible void smp_apic_timer_interrupt(struct pt_regs *);
@@ -178,7 +175,6 @@
extern __visible void smp_reschedule_interrupt(struct pt_regs *);
extern __visible void smp_call_function_interrupt(struct pt_regs *);
extern __visible void smp_call_function_single_interrupt(struct pt_regs *);
-extern __visible void smp_invalidate_interrupt(struct pt_regs *);
#endif
extern char irq_entries_start[];
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 34a5b93..83ec9b1 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -35,11 +35,13 @@
*/
#define ARCH_HAS_IOREMAP_WC
+#define ARCH_HAS_IOREMAP_WT
#include <linux/string.h>
#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/early_ioremap.h>
+#include <asm/pgtable_types.h>
#define build_mmio_read(name, size, type, reg, barrier) \
static inline type name(const volatile void __iomem *addr) \
@@ -177,6 +179,7 @@
* look at pci_iomap().
*/
extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_uc(resource_size_t offset, unsigned long size);
extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
unsigned long prot_val);
@@ -197,8 +200,6 @@
#include <asm-generic/iomap.h>
-#include <linux/vmalloc.h>
-
/*
* Convert a virtual cached pointer to an uncached pointer
*/
@@ -320,6 +321,7 @@
extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
enum page_cache_mode pcm);
extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_wt(resource_size_t offset, unsigned long size);
extern bool is_early_ioremap_ptep(pte_t *ptep);
@@ -338,6 +340,9 @@
#define IO_SPACE_LIMIT 0xffff
#ifdef CONFIG_MTRR
+extern int __must_check arch_phys_wc_index(int handle);
+#define arch_phys_wc_index arch_phys_wc_index
+
extern int __must_check arch_phys_wc_add(unsigned long base,
unsigned long size);
extern void arch_phys_wc_del(int handle);
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 2f91685..6cbf2cf 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -95,9 +95,22 @@
index : 15;
} __attribute__ ((packed));
-#define IOAPIC_AUTO -1
-#define IOAPIC_EDGE 0
-#define IOAPIC_LEVEL 1
+struct irq_alloc_info;
+struct ioapic_domain_cfg;
+
+#define IOAPIC_AUTO -1
+#define IOAPIC_EDGE 0
+#define IOAPIC_LEVEL 1
+
+#define IOAPIC_MASKED 1
+#define IOAPIC_UNMASKED 0
+
+#define IOAPIC_POL_HIGH 0
+#define IOAPIC_POL_LOW 1
+
+#define IOAPIC_DEST_MODE_PHYSICAL 0
+#define IOAPIC_DEST_MODE_LOGICAL 1
+
#define IOAPIC_MAP_ALLOC 0x1
#define IOAPIC_MAP_CHECK 0x2
@@ -110,9 +123,6 @@
extern int mpc_ioapic_id(int ioapic);
extern unsigned int mpc_ioapic_addr(int ioapic);
-extern struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic);
-
-#define MP_MAX_IOAPIC_PIN 127
/* # of MP IRQ source entries */
extern int mp_irq_entries;
@@ -120,9 +130,6 @@
/* MP IRQ source entries */
extern struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
-/* Older SiS APIC requires we rewrite the index register */
-extern int sis_apic_bug;
-
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
@@ -132,6 +139,8 @@
/* -1 if "noapic" boot option passed */
extern int noioapicreroute;
+extern u32 gsi_top;
+
extern unsigned long io_apic_irqs;
#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
@@ -147,13 +156,6 @@
extern void ioapic_insert_resources(void);
extern int arch_early_ioapic_init(void);
-extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
- unsigned int, int,
- struct io_apic_irq_attr *);
-extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
-
-extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
-
extern int save_ioapic_entries(void);
extern void mask_ioapic_entries(void);
extern int restore_ioapic_entries(void);
@@ -161,82 +163,32 @@
extern void setup_ioapic_ids_from_mpc(void);
extern void setup_ioapic_ids_from_mpc_nocheck(void);
-struct io_apic_irq_attr {
- int ioapic;
- int ioapic_pin;
- int trigger;
- int polarity;
-};
-
-enum ioapic_domain_type {
- IOAPIC_DOMAIN_INVALID,
- IOAPIC_DOMAIN_LEGACY,
- IOAPIC_DOMAIN_STRICT,
- IOAPIC_DOMAIN_DYNAMIC,
-};
-
-struct device_node;
-struct irq_domain;
-struct irq_domain_ops;
-
-struct ioapic_domain_cfg {
- enum ioapic_domain_type type;
- const struct irq_domain_ops *ops;
- struct device_node *dev;
-};
-
-struct mp_ioapic_gsi{
- u32 gsi_base;
- u32 gsi_end;
-};
-extern u32 gsi_top;
-
extern int mp_find_ioapic(u32 gsi);
extern int mp_find_ioapic_pin(int ioapic, u32 gsi);
-extern u32 mp_pin_to_gsi(int ioapic, int pin);
-extern int mp_map_gsi_to_irq(u32 gsi, unsigned int flags);
+extern int mp_map_gsi_to_irq(u32 gsi, unsigned int flags,
+ struct irq_alloc_info *info);
extern void mp_unmap_irq(int irq);
extern int mp_register_ioapic(int id, u32 address, u32 gsi_base,
struct ioapic_domain_cfg *cfg);
extern int mp_unregister_ioapic(u32 gsi_base);
extern int mp_ioapic_registered(u32 gsi_base);
-extern int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq);
-extern void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq);
-extern int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node);
-extern void __init pre_init_apic_IRQ0(void);
+
+extern void ioapic_set_alloc_attr(struct irq_alloc_info *info,
+ int node, int trigger, int polarity);
extern void mp_save_irq(struct mpc_intsrc *m);
extern void disable_ioapic_support(void);
-extern void __init native_io_apic_init_mappings(void);
+extern void __init io_apic_init_mappings(void);
extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);
-extern void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int val);
-extern void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val);
extern void native_disable_io_apic(void);
-extern void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries);
-extern void intel_ir_io_apic_print_entries(unsigned int apic, unsigned int nr_entries);
-extern int native_ioapic_set_affinity(struct irq_data *,
- const struct cpumask *,
- bool);
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
return x86_io_apic_ops.read(apic, reg);
}
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
- x86_io_apic_ops.write(apic, reg, value);
-}
-static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
- x86_io_apic_ops.modify(apic, reg, value);
-}
-
-extern void io_apic_eoi(unsigned int apic, unsigned int vector);
-
extern void setup_IO_APIC(void);
extern void enable_IO_APIC(void);
extern void disable_IO_APIC(void);
@@ -253,8 +205,12 @@
static inline void print_IO_APICs(void) {}
#define gsi_top (NR_IRQS_LEGACY)
static inline int mp_find_ioapic(u32 gsi) { return 0; }
-static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; }
-static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) { return gsi; }
+static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags,
+ struct irq_alloc_info *info)
+{
+ return gsi;
+}
+
static inline void mp_unmap_irq(int irq) { }
static inline int save_ioapic_entries(void)
@@ -268,17 +224,11 @@
return -ENOMEM;
}
-static inline void mp_save_irq(struct mpc_intsrc *m) { };
+static inline void mp_save_irq(struct mpc_intsrc *m) { }
static inline void disable_ioapic_support(void) { }
-#define native_io_apic_init_mappings NULL
+static inline void io_apic_init_mappings(void) { }
#define native_io_apic_read NULL
-#define native_io_apic_write NULL
-#define native_io_apic_modify NULL
#define native_disable_io_apic NULL
-#define native_io_apic_print_entries NULL
-#define native_ioapic_set_affinity NULL
-#define native_setup_ioapic_entry NULL
-#define native_eoi_ioapic_pin NULL
static inline void setup_IO_APIC(void) { }
static inline void enable_IO_APIC(void) { }
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index a80cbb8..8008d06 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -30,6 +30,10 @@
extern void irq_force_complete_move(int);
#endif
+#ifdef CONFIG_HAVE_KVM
+extern void kvm_set_posted_intr_wakeup_handler(void (*handler)(void));
+#endif
+
extern void (*x86_platform_ipi_callback)(void);
extern void native_init_IRQ(void);
extern bool handle_irq(unsigned irq, struct pt_regs *regs);
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 6224d31..046c7fb 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -22,84 +22,72 @@
#ifndef __X86_IRQ_REMAPPING_H
#define __X86_IRQ_REMAPPING_H
+#include <asm/irqdomain.h>
+#include <asm/hw_irq.h>
#include <asm/io_apic.h>
-struct IO_APIC_route_entry;
-struct io_apic_irq_attr;
-struct irq_chip;
struct msi_msg;
-struct pci_dev;
-struct irq_cfg;
+struct irq_alloc_info;
+
+enum irq_remap_cap {
+ IRQ_POSTING_CAP = 0,
+};
#ifdef CONFIG_IRQ_REMAP
+extern bool irq_remapping_cap(enum irq_remap_cap cap);
extern void set_irq_remapping_broken(void);
extern int irq_remapping_prepare(void);
extern int irq_remapping_enable(void);
extern void irq_remapping_disable(void);
extern int irq_remapping_reenable(int);
extern int irq_remap_enable_fault_handling(void);
-extern int setup_ioapic_remapped_entry(int irq,
- struct IO_APIC_route_entry *entry,
- unsigned int destination,
- int vector,
- struct io_apic_irq_attr *attr);
-extern void free_remapped_irq(int irq);
-extern void compose_remapped_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id);
-extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
extern void panic_if_irq_remap(const char *msg);
-extern bool setup_remapped_irq(int irq,
- struct irq_cfg *cfg,
- struct irq_chip *chip);
-void irq_remap_modify_chip_defaults(struct irq_chip *chip);
+extern struct irq_domain *
+irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info);
+extern struct irq_domain *
+irq_remapping_get_irq_domain(struct irq_alloc_info *info);
+
+/* Create PCI MSI/MSIx irqdomain, use @parent as the parent irqdomain. */
+extern struct irq_domain *arch_create_msi_irq_domain(struct irq_domain *parent);
+
+/* Get parent irqdomain for interrupt remapping irqdomain */
+static inline struct irq_domain *arch_get_ir_parent_domain(void)
+{
+ return x86_vector_domain;
+}
+
+struct vcpu_data {
+ u64 pi_desc_addr; /* Physical address of PI Descriptor */
+ u32 vector; /* Guest vector of the interrupt */
+};
#else /* CONFIG_IRQ_REMAP */
+static inline bool irq_remapping_cap(enum irq_remap_cap cap) { return 0; }
static inline void set_irq_remapping_broken(void) { }
static inline int irq_remapping_prepare(void) { return -ENODEV; }
static inline int irq_remapping_enable(void) { return -ENODEV; }
static inline void irq_remapping_disable(void) { }
static inline int irq_remapping_reenable(int eim) { return -ENODEV; }
static inline int irq_remap_enable_fault_handling(void) { return -ENODEV; }
-static inline int setup_ioapic_remapped_entry(int irq,
- struct IO_APIC_route_entry *entry,
- unsigned int destination,
- int vector,
- struct io_apic_irq_attr *attr)
-{
- return -ENODEV;
-}
-static inline void free_remapped_irq(int irq) { }
-static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
-{
-}
-static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
-{
- return -ENODEV;
-}
static inline void panic_if_irq_remap(const char *msg)
{
}
-static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+static inline struct irq_domain *
+irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
{
+ return NULL;
}
-static inline bool setup_remapped_irq(int irq,
- struct irq_cfg *cfg,
- struct irq_chip *chip)
+static inline struct irq_domain *
+irq_remapping_get_irq_domain(struct irq_alloc_info *info)
{
- return false;
+ return NULL;
}
+
#endif /* CONFIG_IRQ_REMAP */
-
-#define dmar_alloc_hwirq() irq_alloc_hwirq(-1)
-#define dmar_free_hwirq irq_free_hwirq
-
#endif /* __X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 666c89e..4c2d2eb 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -47,31 +47,12 @@
#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
#define IA32_SYSCALL_VECTOR 0x80
-#ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR 0x80
-#endif
/*
* Vectors 0x30-0x3f are used for ISA interrupts.
* round up to the next 16-vector boundary
*/
-#define IRQ0_VECTOR ((FIRST_EXTERNAL_VECTOR + 16) & ~15)
-
-#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
+#define ISA_IRQ_VECTOR(irq) (((FIRST_EXTERNAL_VECTOR + 16) & ~15) + irq)
/*
* Special IRQ vectors used by the SMP architecture, 0xf0-0xff
@@ -102,21 +83,23 @@
*/
#define X86_PLATFORM_IPI_VECTOR 0xf7
-/* Vector for KVM to deliver posted interrupt IPI */
-#ifdef CONFIG_HAVE_KVM
-#define POSTED_INTR_VECTOR 0xf2
-#endif
-
+#define POSTED_INTR_WAKEUP_VECTOR 0xf1
/*
* IRQ work vector:
*/
#define IRQ_WORK_VECTOR 0xf6
#define UV_BAU_MESSAGE 0xf5
+#define DEFERRED_ERROR_VECTOR 0xf4
/* Vector on which hypervisor callbacks will be delivered */
#define HYPERVISOR_CALLBACK_VECTOR 0xf3
+/* Vector for KVM to deliver posted interrupt IPI */
+#ifdef CONFIG_HAVE_KVM
+#define POSTED_INTR_VECTOR 0xf2
+#endif
+
/*
* Local APIC timer IRQ vector is on a different priority level,
* to work around the 'lost local interrupt if more than 2 IRQ
@@ -155,18 +138,22 @@
* static arrays.
*/
-#define NR_IRQS_LEGACY 16
+#define NR_IRQS_LEGACY 16
-#define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS )
+#define CPU_VECTOR_LIMIT (64 * NR_CPUS)
+#define IO_APIC_VECTOR_LIMIT (32 * MAX_IO_APICS)
-#ifdef CONFIG_X86_IO_APIC
-# define CPU_VECTOR_LIMIT (64 * NR_CPUS)
-# define NR_IRQS \
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_PCI_MSI)
+#define NR_IRQS \
(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \
(NR_VECTORS + CPU_VECTOR_LIMIT) : \
(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
-#else /* !CONFIG_X86_IO_APIC: */
-# define NR_IRQS NR_IRQS_LEGACY
+#elif defined(CONFIG_X86_IO_APIC)
+#define NR_IRQS (NR_VECTORS + IO_APIC_VECTOR_LIMIT)
+#elif defined(CONFIG_PCI_MSI)
+#define NR_IRQS (NR_VECTORS + CPU_VECTOR_LIMIT)
+#else
+#define NR_IRQS NR_IRQS_LEGACY
#endif
#endif /* _ASM_X86_IRQ_VECTORS_H */
diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h
new file mode 100644
index 0000000..d26075b
--- /dev/null
+++ b/arch/x86/include/asm/irqdomain.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_IRQDOMAIN_H
+#define _ASM_IRQDOMAIN_H
+
+#include <linux/irqdomain.h>
+#include <asm/hw_irq.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+enum {
+ /* Allocate contiguous CPU vectors */
+ X86_IRQ_ALLOC_CONTIGUOUS_VECTORS = 0x1,
+};
+
+extern struct irq_domain *x86_vector_domain;
+
+extern void init_irq_alloc_info(struct irq_alloc_info *info,
+ const struct cpumask *mask);
+extern void copy_irq_alloc_info(struct irq_alloc_info *dst,
+ struct irq_alloc_info *src);
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+struct device_node;
+struct irq_data;
+
+enum ioapic_domain_type {
+ IOAPIC_DOMAIN_INVALID,
+ IOAPIC_DOMAIN_LEGACY,
+ IOAPIC_DOMAIN_STRICT,
+ IOAPIC_DOMAIN_DYNAMIC,
+};
+
+struct ioapic_domain_cfg {
+ enum ioapic_domain_type type;
+ const struct irq_domain_ops *ops;
+ struct device_node *dev;
+};
+
+extern const struct irq_domain_ops mp_ioapic_irqdomain_ops;
+
+extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg);
+extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs);
+extern void mp_irqdomain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data);
+extern void mp_irqdomain_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data);
+extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain);
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef CONFIG_PCI_MSI
+extern void arch_init_msi_domain(struct irq_domain *domain);
+#else
+static inline void arch_init_msi_domain(struct irq_domain *domain) { }
+#endif
+
+#ifdef CONFIG_HT_IRQ
+extern void arch_init_htirq_domain(struct irq_domain *domain);
+#else
+static inline void arch_init_htirq_domain(struct irq_domain *domain) { }
+#endif
+
+#endif
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 1f5a86d..982dfc3 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -17,11 +17,16 @@
#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
#define MCG_ELOG_P (1ULL<<26) /* Extended error log supported */
+#define MCG_LMCE_P (1ULL<<27) /* Local machine check supported */
/* MCG_STATUS register defines */
#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+#define MCG_STATUS_LMCES (1ULL<<3) /* LMCE signaled */
+
+/* MCG_EXT_CTL register defines */
+#define MCG_EXT_CTL_LMCE_EN (1ULL<<0) /* Enable LMCE */
/* MCi_STATUS register defines */
#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
@@ -104,6 +109,7 @@
struct mca_config {
bool dont_log_ce;
bool cmci_disabled;
+ bool lmce_disabled;
bool ignore_ce;
bool disabled;
bool ser;
@@ -117,8 +123,19 @@
};
struct mce_vendor_flags {
- __u64 overflow_recov : 1, /* cpuid_ebx(80000007) */
- __reserved_0 : 63;
+ /*
+ * overflow recovery cpuid bit indicates that overflow
+ * conditions are not fatal
+ */
+ __u64 overflow_recov : 1,
+
+ /*
+ * SUCCOR stands for S/W UnCorrectable error COntainment
+ * and Recovery. It indicates support for data poisoning
+ * in HW and deferred error interrupts.
+ */
+ succor : 1,
+ __reserved_0 : 62;
};
extern struct mce_vendor_flags mce_flags;
@@ -168,12 +185,16 @@
void cmci_reenable(void);
void cmci_rediscover(void);
void cmci_recheck(void);
+void lmce_clear(void);
+void lmce_enable(void);
#else
static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) { }
static inline void cmci_clear(void) {}
static inline void cmci_reenable(void) {}
static inline void cmci_rediscover(void) {}
static inline void cmci_recheck(void) {}
+static inline void lmce_clear(void) {}
+static inline void lmce_enable(void) {}
#endif
#ifdef CONFIG_X86_MCE_AMD
@@ -223,6 +244,9 @@
extern void (*mce_threshold_vector)(void);
extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+/* Deferred error interrupt handler */
+extern void (*deferred_error_int_vector)(void);
+
/*
* Thermal handler
*/
diff --git a/arch/x86/include/asm/msi.h b/arch/x86/include/asm/msi.h
new file mode 100644
index 0000000..93724cc
--- /dev/null
+++ b/arch/x86/include/asm/msi.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_MSI_H
+#define _ASM_X86_MSI_H
+#include <asm/hw_irq.h>
+
+typedef struct irq_alloc_info msi_alloc_info_t;
+
+#endif /* _ASM_X86_MSI_H */
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
similarity index 99%
rename from arch/x86/include/uapi/asm/msr-index.h
rename to arch/x86/include/asm/msr-index.h
index 3c6bb34..9ebc3d0 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -56,6 +56,7 @@
#define MSR_IA32_MCG_CAP 0x00000179
#define MSR_IA32_MCG_STATUS 0x0000017a
#define MSR_IA32_MCG_CTL 0x0000017b
+#define MSR_IA32_MCG_EXT_CTL 0x000004d0
#define MSR_OFFCORE_RSP_0 0x000001a6
#define MSR_OFFCORE_RSP_1 0x000001a7
@@ -380,6 +381,7 @@
#define FEATURE_CONTROL_LOCKED (1<<0)
#define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX (1<<1)
#define FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX (1<<2)
+#define FEATURE_CONTROL_LMCE (1<<20)
#define MSR_IA32_APICBASE 0x0000001b
#define MSR_IA32_APICBASE_BSP (1<<8)
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index de36f22..e6a707e 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -1,13 +1,14 @@
#ifndef _ASM_X86_MSR_H
#define _ASM_X86_MSR_H
-#include <uapi/asm/msr.h>
+#include "msr-index.h"
#ifndef __ASSEMBLY__
#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/cpumask.h>
+#include <uapi/asm/msr.h>
struct msr {
union {
@@ -205,8 +206,13 @@
#endif /* !CONFIG_PARAVIRT */
-#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val), \
- (u32)((val) >> 32))
+/*
+ * 64-bit version of wrmsr_safe():
+ */
+static inline int wrmsrl_safe(u32 msr, u64 val)
+{
+ return wrmsr_safe(msr, (u32)val, (u32)(val >> 32));
+}
#define write_tsc(low, high) wrmsr(MSR_IA32_TSC, (low), (high))
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index f768f62..b94f6f6 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -31,7 +31,7 @@
* arch_phys_wc_add and arch_phys_wc_del.
*/
# ifdef CONFIG_MTRR
-extern u8 mtrr_type_lookup(u64 addr, u64 end);
+extern u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform);
extern void mtrr_save_fixed_ranges(void *);
extern void mtrr_save_state(void);
extern int mtrr_add(unsigned long base, unsigned long size,
@@ -48,14 +48,13 @@
extern void mtrr_bp_restore(void);
extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
extern int amd_special_default_mtrr(void);
-extern int phys_wc_to_mtrr_index(int handle);
# else
-static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+static inline u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform)
{
/*
* Return no-MTRRs:
*/
- return 0xff;
+ return MTRR_TYPE_INVALID;
}
#define mtrr_save_fixed_ranges(arg) do {} while (0)
#define mtrr_save_state() do {} while (0)
@@ -84,10 +83,6 @@
static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
{
}
-static inline int phys_wc_to_mtrr_index(int handle)
-{
- return -1;
-}
#define mtrr_ap_init() do {} while (0)
#define mtrr_bp_init() do {} while (0)
@@ -127,4 +122,8 @@
_IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
#endif /* CONFIG_COMPAT */
+/* Bit fields for enabled in struct mtrr_state_type */
+#define MTRR_STATE_MTRR_FIXED_ENABLED 0x01
+#define MTRR_STATE_MTRR_ENABLED 0x02
+
#endif /* _ASM_X86_MTRR_H */
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 8766c7c..a6b8f9f 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -160,13 +160,14 @@
u64 (*read_pmc)(int counter);
unsigned long long (*read_tscp)(unsigned int *aux);
+#ifdef CONFIG_X86_32
/*
* Atomically enable interrupts and return to userspace. This
- * is only ever used to return to 32-bit processes; in a
- * 64-bit kernel, it's used for 32-on-64 compat processes, but
- * never native 64-bit processes. (Jump, not call.)
+ * is only used in 32-bit kernels. 64-bit kernels use
+ * usergs_sysret32 instead.
*/
void (*irq_enable_sysexit)(void);
+#endif
/*
* Switch to usermode gs and return to 64-bit usermode using
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 91bc4ba..ca6c228 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -4,14 +4,9 @@
#include <linux/types.h>
#include <asm/pgtable_types.h>
-#ifdef CONFIG_X86_PAT
-extern int pat_enabled;
-#else
-static const int pat_enabled;
-#endif
-
+bool pat_enabled(void);
extern void pat_init(void);
-void pat_init_cache_modes(void);
+void pat_init_cache_modes(u64);
extern int reserve_memtype(u64 start, u64 end,
enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 4e370a5..d8c80ff 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,15 +96,10 @@
#ifdef CONFIG_PCI_MSI
/* implemented in arch/x86/kernel/apic/io_apic. */
struct msi_desc;
-void native_compose_msi_msg(struct pci_dev *pdev, unsigned int irq,
- unsigned int dest, struct msi_msg *msg, u8 hpet_id);
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void native_teardown_msi_irq(unsigned int irq);
void native_restore_msi_irqs(struct pci_dev *dev);
-int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
- unsigned int irq_base, unsigned int irq_offset);
#else
-#define native_compose_msi_msg NULL
#define native_setup_msi_irqs NULL
#define native_teardown_msi_irq NULL
#endif
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index fe57e7a..2562e30 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -398,11 +398,17 @@
* requested memtype:
* - request is uncached, return cannot be write-back
* - request is write-combine, return cannot be write-back
+ * - request is write-through, return cannot be write-back
+ * - request is write-through, return cannot be write-combine
*/
if ((pcm == _PAGE_CACHE_MODE_UC_MINUS &&
new_pcm == _PAGE_CACHE_MODE_WB) ||
(pcm == _PAGE_CACHE_MODE_WC &&
- new_pcm == _PAGE_CACHE_MODE_WB)) {
+ new_pcm == _PAGE_CACHE_MODE_WB) ||
+ (pcm == _PAGE_CACHE_MODE_WT &&
+ new_pcm == _PAGE_CACHE_MODE_WB) ||
+ (pcm == _PAGE_CACHE_MODE_WT &&
+ new_pcm == _PAGE_CACHE_MODE_WC)) {
return 0;
}
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 78f0c8c..13f310b 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -367,6 +367,9 @@
#define pgprot_writecombine pgprot_writecombine
extern pgprot_t pgprot_writecombine(pgprot_t prot);
+#define pgprot_writethrough pgprot_writethrough
+extern pgprot_t pgprot_writethrough(pgprot_t prot);
+
/* Indicate that x86 has its own track and untrack pfn vma functions */
#define __HAVE_PFNMAP_TRACKING
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index a90f897..a4a7728 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -5,12 +5,14 @@
/* misc architecture specific prototypes */
-void system_call(void);
void syscall_init(void);
-void ia32_syscall(void);
-void ia32_cstar_target(void);
-void ia32_sysenter_target(void);
+void entry_SYSCALL_64(void);
+void entry_SYSCALL_compat(void);
+void entry_INT80_32(void);
+void entry_INT80_compat(void);
+void entry_SYSENTER_32(void);
+void entry_SYSENTER_compat(void);
void x86_configure_nx(void);
void x86_report_nx(void);
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index aeb4666e..2270e41 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -215,6 +215,44 @@
: [pax] "a" (p));
}
+/**
+ * pcommit_sfence() - persistent commit and fence
+ *
+ * The PCOMMIT instruction ensures that data that has been flushed from the
+ * processor's cache hierarchy with CLWB, CLFLUSHOPT or CLFLUSH is accepted to
+ * memory and is durable on the DIMM. The primary use case for this is
+ * persistent memory.
+ *
+ * This function shows how to properly use CLWB/CLFLUSHOPT/CLFLUSH and PCOMMIT
+ * with appropriate fencing.
+ *
+ * Example:
+ * void flush_and_commit_buffer(void *vaddr, unsigned int size)
+ * {
+ * unsigned long clflush_mask = boot_cpu_data.x86_clflush_size - 1;
+ * void *vend = vaddr + size;
+ * void *p;
+ *
+ * for (p = (void *)((unsigned long)vaddr & ~clflush_mask);
+ * p < vend; p += boot_cpu_data.x86_clflush_size)
+ * clwb(p);
+ *
+ * // SFENCE to order CLWB/CLFLUSHOPT/CLFLUSH cache flushes
+ * // MFENCE via mb() also works
+ * wmb();
+ *
+ * // PCOMMIT and the required SFENCE for ordering
+ * pcommit_sfence();
+ * }
+ *
+ * After this function completes the data pointed to by 'vaddr' has been
+ * accepted to memory and will be durable if the 'vaddr' points to persistent
+ * memory.
+ *
+ * PCOMMIT must always be ordered by an MFENCE or SFENCE, so to help simplify
+ * things we include both the PCOMMIT and the required SFENCE in the
+ * alternatives generated by pcommit_sfence().
+ */
static inline void pcommit_sfence(void)
{
alternative(ASM_NOP7,
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b4bdec3..225ee54 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -177,8 +177,6 @@
*/
#ifndef __ASSEMBLY__
-DECLARE_PER_CPU(unsigned long, kernel_stack);
-
static inline struct thread_info *current_thread_info(void)
{
return (struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
@@ -197,9 +195,13 @@
#else /* !__ASSEMBLY__ */
+#ifdef CONFIG_X86_64
+# define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
+#endif
+
/* Load thread_info address into "reg" */
#define GET_THREAD_INFO(reg) \
- _ASM_MOV PER_CPU_VAR(kernel_stack),reg ; \
+ _ASM_MOV PER_CPU_VAR(cpu_current_top_of_stack),reg ; \
_ASM_SUB $(THREAD_SIZE),reg ;
/*
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 5a77593f..0fb4648 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -26,7 +26,7 @@
#define _ASM_X86_TOPOLOGY_H
#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_HT
+# ifdef CONFIG_SMP
# define ENABLE_TOPO_DEFINES
# endif
#else
diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h
index 4cab890..38a09a1 100644
--- a/arch/x86/include/asm/trace/irq_vectors.h
+++ b/arch/x86/include/asm/trace/irq_vectors.h
@@ -101,6 +101,12 @@
DEFINE_IRQ_VECTOR_EVENT(threshold_apic);
/*
+ * deferred_error_apic - called when entering/exiting a deferred apic interrupt
+ * vector handler
+ */
+DEFINE_IRQ_VECTOR_EVENT(deferred_error_apic);
+
+/*
* thermal_apic - called when entering/exiting a thermal apic interrupt
* vector handler
*/
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 4e49d7d..c5380be 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -108,7 +108,8 @@
void math_emulate(struct math_emu_info *);
#ifndef CONFIG_X86_32
asmlinkage void smp_thermal_interrupt(void);
-asmlinkage void mce_threshold_interrupt(void);
+asmlinkage void smp_threshold_interrupt(void);
+asmlinkage void smp_deferred_error_interrupt(void);
#endif
extern enum ctx_state ist_enter(struct pt_regs *regs);
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 7c8ad34..f5dcb52 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -59,6 +59,10 @@
__put_user_size(*(u32 *)from, (u32 __user *)to,
4, ret, 4);
return ret;
+ case 8:
+ __put_user_size(*(u64 *)from, (u64 __user *)to,
+ 8, ret, 8);
+ return ret;
}
}
return __copy_to_user_ll(to, from, n);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..48d34d2 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -171,38 +171,17 @@
};
struct pci_dev;
-struct msi_msg;
struct x86_msi_ops {
int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
- void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
- unsigned int dest, struct msi_msg *msg,
- u8 hpet_id);
void (*teardown_msi_irq)(unsigned int irq);
void (*teardown_msi_irqs)(struct pci_dev *dev);
void (*restore_msi_irqs)(struct pci_dev *dev);
- int (*setup_hpet_msi)(unsigned int irq, unsigned int id);
};
-struct IO_APIC_route_entry;
-struct io_apic_irq_attr;
-struct irq_data;
-struct cpumask;
-
struct x86_io_apic_ops {
- void (*init) (void);
unsigned int (*read) (unsigned int apic, unsigned int reg);
- void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
- void (*modify) (unsigned int apic, unsigned int reg, unsigned int value);
void (*disable)(void);
- void (*print_entries)(unsigned int apic, unsigned int nr_entries);
- int (*set_affinity)(struct irq_data *data,
- const struct cpumask *mask,
- bool force);
- int (*setup_entry)(int irq, struct IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr);
- void (*eoi_ioapic_pin)(int apic, int pin, int vector);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/include/uapi/asm/msr.h b/arch/x86/include/uapi/asm/msr.h
index 155e510..c41f4fe 100644
--- a/arch/x86/include/uapi/asm/msr.h
+++ b/arch/x86/include/uapi/asm/msr.h
@@ -1,8 +1,6 @@
#ifndef _UAPI_ASM_X86_MSR_H
#define _UAPI_ASM_X86_MSR_H
-#include <asm/msr-index.h>
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
diff --git a/arch/x86/include/uapi/asm/mtrr.h b/arch/x86/include/uapi/asm/mtrr.h
index d0acb65..7528dcf 100644
--- a/arch/x86/include/uapi/asm/mtrr.h
+++ b/arch/x86/include/uapi/asm/mtrr.h
@@ -103,7 +103,7 @@
#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry)
-/* These are the region types */
+/* MTRR memory types, which are defined in SDM */
#define MTRR_TYPE_UNCACHABLE 0
#define MTRR_TYPE_WRCOMB 1
/*#define MTRR_TYPE_ 2*/
@@ -113,5 +113,11 @@
#define MTRR_TYPE_WRBACK 6
#define MTRR_NUM_TYPES 7
+/*
+ * Invalid MTRR memory type. mtrr_type_lookup() returns this value when
+ * MTRRs are disabled. Note, this value is allocated from the reserved
+ * values (0x7-0xff) of the MTRR memory types.
+ */
+#define MTRR_TYPE_INVALID 0xff
#endif /* _UAPI_ASM_X86_MTRR_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index febaf18..0f15af4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -22,7 +22,7 @@
CFLAGS_irq.o := -I$(src)/../include/asm/trace
-obj-y := process_$(BITS).o signal.o entry_$(BITS).o
+obj-y := process_$(BITS).o signal.o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time.o ioport.o ldt.o dumpstack.o nmi.o
obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
@@ -31,9 +31,6 @@
obj-$(CONFIG_X86_32) += i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += mcount_64.o
-obj-y += syscall_$(BITS).o vsyscall_gtod.o
-obj-$(CONFIG_IA32_EMULATION) += syscall_32.o
-obj-$(CONFIG_X86_VSYSCALL_EMULATION) += vsyscall_64.o vsyscall_emu_64.o
obj-$(CONFIG_X86_ESPFIX64) += espfix_64.o
obj-$(CONFIG_SYSFS) += ksysfs.o
obj-y += bootflag.o e820.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index dbe76a1..e49ee24 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -31,12 +31,12 @@
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <asm/irqdomain.h>
#include <asm/pci_x86.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -400,57 +400,13 @@
return 0;
}
-static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
- int polarity)
-{
- int irq, node;
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return gsi;
-
- trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
- polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
- node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
- if (mp_set_gsi_attr(gsi, trigger, polarity, node)) {
- pr_warn("Failed to set pin attr for GSI%d\n", gsi);
- return -1;
- }
-
- irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
- if (irq < 0)
- return irq;
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi)
- mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-
- return irq;
-}
-
-static void mp_unregister_gsi(u32 gsi)
-{
- int irq;
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return;
-
- irq = mp_map_gsi_to_irq(gsi, 0);
- if (irq > 0)
- mp_unmap_irq(irq);
-}
-
-static struct irq_domain_ops acpi_irqdomain_ops = {
- .map = mp_irqdomain_map,
- .unmap = mp_irqdomain_unmap,
-};
-
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
struct acpi_madt_io_apic *ioapic = NULL;
struct ioapic_domain_cfg cfg = {
.type = IOAPIC_DOMAIN_DYNAMIC,
- .ops = &acpi_irqdomain_ops,
+ .ops = &mp_ioapic_irqdomain_ops,
};
ioapic = (struct acpi_madt_io_apic *)header;
@@ -652,7 +608,7 @@
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (trigger == ACPI_LEVEL_SENSITIVE)
- eisa_set_level_irq(gsi);
+ elcr_set_level_irq(gsi);
#endif
return gsi;
@@ -663,10 +619,21 @@
int trigger, int polarity)
{
int irq = gsi;
-
#ifdef CONFIG_X86_IO_APIC
+ int node;
+ struct irq_alloc_info info;
+
+ node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+ trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+ polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+ ioapic_set_alloc_attr(&info, node, trigger, polarity);
+
mutex_lock(&acpi_ioapic_lock);
- irq = mp_register_gsi(dev, gsi, trigger, polarity);
+ irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (irq >= 0 && enable_update_mptable &&
+ acpi_gbl_FADT.sci_interrupt != gsi)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
mutex_unlock(&acpi_ioapic_lock);
#endif
@@ -676,8 +643,12 @@
static void acpi_unregister_gsi_ioapic(u32 gsi)
{
#ifdef CONFIG_X86_IO_APIC
+ int irq;
+
mutex_lock(&acpi_ioapic_lock);
- mp_unregister_gsi(gsi);
+ irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+ if (irq > 0)
+ mp_unmap_irq(irq);
mutex_unlock(&acpi_ioapic_lock);
#endif
}
@@ -786,7 +757,7 @@
u64 addr;
struct ioapic_domain_cfg cfg = {
.type = IOAPIC_DOMAIN_DYNAMIC,
- .ops = &acpi_irqdomain_ops,
+ .ops = &mp_ioapic_irqdomain_ops,
};
ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index ae693b5..8c35df4 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -62,7 +62,7 @@
pushfq
popq pt_regs_flags(%rax)
- movq $resume_point, saved_rip(%rip)
+ movq $.Lresume_point, saved_rip(%rip)
movq %rsp, saved_rsp
movq %rbp, saved_rbp
@@ -75,10 +75,10 @@
xorl %eax, %eax
call x86_acpi_enter_sleep_state
/* in case something went wrong, restore the machine status and go on */
- jmp resume_point
+ jmp .Lresume_point
.align 4
-resume_point:
+.Lresume_point:
/* We don't restore %rax, it must be 0 anyway */
movq $saved_context, %rax
movq saved_context_cr4(%rax), %rbx
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 7fe0972..c42827e 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -231,6 +231,15 @@
#endif
}
break;
+
+ case X86_VENDOR_AMD:
+ if (boot_cpu_data.x86 > 0xf) {
+ ideal_nops = p6_nops;
+ return;
+ }
+
+ /* fall through */
+
default:
#ifdef CONFIG_X86_64
ideal_nops = k8_nops;
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 6a7c23f..ede92c3 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -171,10 +171,6 @@
static void apbt_setup_irq(struct apbt_dev *adev)
{
- /* timer0 irq has been setup early */
- if (adev->irq == 0)
- return;
-
irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
}
diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
index 816f36e..ae50d34 100644
--- a/arch/x86/kernel/apic/htirq.c
+++ b/arch/x86/kernel/apic/htirq.c
@@ -3,6 +3,8 @@
*
* Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
* Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ * Add support of hierarchical irqdomain
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,78 +16,112 @@
#include <linux/device.h>
#include <linux/pci.h>
#include <linux/htirq.h>
+#include <asm/irqdomain.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/hypertransport.h>
+static struct irq_domain *htirq_domain;
+
/*
* Hypertransport interrupt support
*/
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
- struct ht_irq_msg msg;
-
- fetch_ht_irq_msg(irq, &msg);
-
- msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
- msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
- msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
- msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
- write_ht_irq_msg(irq, &msg);
-}
-
static int
ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- unsigned int dest;
+ struct irq_data *parent = data->parent_data;
int ret;
- ret = apic_set_affinity(data, mask, &dest);
- if (ret)
- return ret;
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ if (ret >= 0) {
+ struct ht_irq_msg msg;
+ struct irq_cfg *cfg = irqd_cfg(data);
- target_ht_irq(data->irq, dest, cfg->vector);
- return IRQ_SET_MASK_OK_NOCOPY;
+ fetch_ht_irq_msg(data->irq, &msg);
+ msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK |
+ HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_lo |= HT_IRQ_LOW_VECTOR(cfg->vector) |
+ HT_IRQ_LOW_DEST_ID(cfg->dest_apicid);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
+ write_ht_irq_msg(data->irq, &msg);
+ }
+
+ return ret;
}
static struct irq_chip ht_irq_chip = {
.name = "PCI-HT",
.irq_mask = mask_ht_irq,
.irq_unmask = unmask_ht_irq,
- .irq_ack = apic_ack_edge,
+ .irq_ack = irq_chip_ack_parent,
.irq_set_affinity = ht_set_affinity,
- .irq_retrigger = apic_retrigger_irq,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+static int htirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
{
- struct irq_cfg *cfg;
+ struct ht_irq_cfg *ht_cfg;
+ struct irq_alloc_info *info = arg;
+ struct pci_dev *dev;
+ irq_hw_number_t hwirq;
+ int ret;
+
+ if (nr_irqs > 1 || !info)
+ return -EINVAL;
+
+ dev = info->ht_dev;
+ hwirq = (info->ht_idx & 0xFF) |
+ PCI_DEVID(dev->bus->number, dev->devfn) << 8 |
+ (pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 24;
+ if (irq_find_mapping(domain, hwirq) > 0)
+ return -EEXIST;
+
+ ht_cfg = kmalloc(sizeof(*ht_cfg), GFP_KERNEL);
+ if (!ht_cfg)
+ return -ENOMEM;
+
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
+ if (ret < 0) {
+ kfree(ht_cfg);
+ return ret;
+ }
+
+ /* Initialize msg to a value that will never match the first write. */
+ ht_cfg->msg.address_lo = 0xffffffff;
+ ht_cfg->msg.address_hi = 0xffffffff;
+ ht_cfg->dev = info->ht_dev;
+ ht_cfg->update = info->ht_update;
+ ht_cfg->pos = info->ht_pos;
+ ht_cfg->idx = 0x10 + (info->ht_idx * 2);
+ irq_domain_set_info(domain, virq, hwirq, &ht_irq_chip, ht_cfg,
+ handle_edge_irq, ht_cfg, "edge");
+
+ return 0;
+}
+
+static void htirq_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
+
+ BUG_ON(nr_irqs != 1);
+ kfree(irq_data->chip_data);
+ irq_domain_free_irqs_top(domain, virq, nr_irqs);
+}
+
+static void htirq_domain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
struct ht_irq_msg msg;
- unsigned dest;
- int err;
+ struct irq_cfg *cfg = irqd_cfg(irq_data);
- if (disable_apic)
- return -ENXIO;
-
- cfg = irq_cfg(irq);
- err = assign_irq_vector(irq, cfg, apic->target_cpus());
- if (err)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(cfg->domain,
- apic->target_cpus(), &dest);
- if (err)
- return err;
-
- msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
msg.address_lo =
HT_IRQ_LOW_BASE |
- HT_IRQ_LOW_DEST_ID(dest) |
+ HT_IRQ_LOW_DEST_ID(cfg->dest_apicid) |
HT_IRQ_LOW_VECTOR(cfg->vector) |
((apic->irq_dest_mode == 0) ?
HT_IRQ_LOW_DM_PHYSICAL :
@@ -95,13 +131,56 @@
HT_IRQ_LOW_MT_FIXED :
HT_IRQ_LOW_MT_ARBITRATED) |
HT_IRQ_LOW_IRQ_MASKED;
+ write_ht_irq_msg(irq_data->irq, &msg);
+}
- write_ht_irq_msg(irq, &msg);
+static void htirq_domain_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ struct ht_irq_msg msg;
- irq_set_chip_and_handler_name(irq, &ht_irq_chip,
- handle_edge_irq, "edge");
+ memset(&msg, 0, sizeof(msg));
+ write_ht_irq_msg(irq_data->irq, &msg);
+}
- dev_dbg(&dev->dev, "irq %d for HT\n", irq);
+static const struct irq_domain_ops htirq_domain_ops = {
+ .alloc = htirq_domain_alloc,
+ .free = htirq_domain_free,
+ .activate = htirq_domain_activate,
+ .deactivate = htirq_domain_deactivate,
+};
- return 0;
+void arch_init_htirq_domain(struct irq_domain *parent)
+{
+ if (disable_apic)
+ return;
+
+ htirq_domain = irq_domain_add_tree(NULL, &htirq_domain_ops, NULL);
+ if (!htirq_domain)
+ pr_warn("failed to initialize irqdomain for HTIRQ.\n");
+ else
+ htirq_domain->parent = parent;
+}
+
+int arch_setup_ht_irq(int idx, int pos, struct pci_dev *dev,
+ ht_irq_update_t *update)
+{
+ struct irq_alloc_info info;
+
+ if (!htirq_domain)
+ return -ENOSYS;
+
+ init_irq_alloc_info(&info, NULL);
+ info.ht_idx = idx;
+ info.ht_pos = pos;
+ info.ht_dev = dev;
+ info.ht_update = update;
+
+ return irq_domain_alloc_irqs(htirq_domain, 1, dev_to_node(&dev->dev),
+ &info);
+}
+
+void arch_teardown_ht_irq(unsigned int irq)
+{
+ irq_domain_free_irqs(irq, 1);
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f4dc246..845dc0d 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -18,6 +18,16 @@
* and Rolf G. Tews
* for testing these extensively
* Paul Diefenbaugh : Added full ACPI support
+ *
+ * Historical information which is worth to be preserved:
+ *
+ * - SiS APIC rmw bug:
+ *
+ * We used to have a workaround for a bug in SiS chips which
+ * required to rewrite the index register for a read-modify-write
+ * operation as the chip lost the index information which was
+ * setup for the read already. We cache the data now, so that
+ * workaround has been removed.
*/
#include <linux/mm.h>
@@ -31,13 +41,13 @@
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/syscore_ops.h>
-#include <linux/irqdomain.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/jiffies.h> /* time_after() */
#include <linux/slab.h>
#include <linux/bootmem.h>
+#include <asm/irqdomain.h>
#include <asm/idle.h>
#include <asm/io.h>
#include <asm/smp.h>
@@ -63,27 +73,31 @@
#define for_each_ioapic_pin(idx, pin) \
for_each_ioapic((idx)) \
for_each_pin((idx), (pin))
-
#define for_each_irq_pin(entry, head) \
list_for_each_entry(entry, &head, list)
-/*
- * Is the SiS APIC rmw bug present ?
- * -1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
static DEFINE_RAW_SPINLOCK(ioapic_lock);
static DEFINE_MUTEX(ioapic_mutex);
static unsigned int ioapic_dynirq_base;
static int ioapic_initialized;
-struct mp_pin_info {
+struct irq_pin_list {
+ struct list_head list;
+ int apic, pin;
+};
+
+struct mp_chip_data {
+ struct list_head irq_2_pin;
+ struct IO_APIC_route_entry entry;
int trigger;
int polarity;
- int node;
- int set;
u32 count;
+ bool isa_irq;
+};
+
+struct mp_ioapic_gsi {
+ u32 gsi_base;
+ u32 gsi_end;
};
static struct ioapic {
@@ -101,7 +115,6 @@
struct mp_ioapic_gsi gsi_config;
struct ioapic_domain_cfg irqdomain_cfg;
struct irq_domain *irqdomain;
- struct mp_pin_info *pin_info;
struct resource *iomem_res;
} ioapics[MAX_IO_APICS];
@@ -117,7 +130,7 @@
return ioapics[ioapic_idx].mp_config.apicaddr;
}
-struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
+static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
{
return &ioapics[ioapic_idx].gsi_config;
}
@@ -129,11 +142,16 @@
return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
}
-u32 mp_pin_to_gsi(int ioapic, int pin)
+static inline u32 mp_pin_to_gsi(int ioapic, int pin)
{
return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin;
}
+static inline bool mp_is_legacy_irq(int irq)
+{
+ return irq >= 0 && irq < nr_legacy_irqs();
+}
+
/*
* Initialize all legacy IRQs and all pins on the first IOAPIC
* if we have legacy interrupt controller. Kernel boot option "pirq="
@@ -144,12 +162,7 @@
if (!nr_legacy_irqs())
return 0;
- return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs());
-}
-
-static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin)
-{
- return ioapics[ioapic_idx].pin_info + pin;
+ return ioapic == 0 || mp_is_legacy_irq(irq);
}
static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic)
@@ -216,16 +229,6 @@
panic("Max # of irq sources exceeded!!\n");
}
-struct irq_pin_list {
- struct list_head list;
- int apic, pin;
-};
-
-static struct irq_pin_list *alloc_irq_pin_list(int node)
-{
- return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node);
-}
-
static void alloc_ioapic_saved_registers(int idx)
{
size_t size;
@@ -247,8 +250,7 @@
int __init arch_early_ioapic_init(void)
{
- struct irq_cfg *cfg;
- int i, node = cpu_to_node(0);
+ int i;
if (!nr_legacy_irqs())
io_apic_irqs = ~0UL;
@@ -256,16 +258,6 @@
for_each_ioapic(i)
alloc_ioapic_saved_registers(i);
- /*
- * For legacy IRQ's, start with assigning irq0 to irq15 to
- * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's.
- */
- for (i = 0; i < nr_legacy_irqs(); i++) {
- cfg = alloc_irq_and_cfg_at(i, node);
- cfg->vector = IRQ0_VECTOR + i;
- cpumask_setall(cfg->domain);
- }
-
return 0;
}
@@ -283,7 +275,7 @@
+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
}
-void io_apic_eoi(unsigned int apic, unsigned int vector)
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
writel(vector, &io_apic->eoi);
@@ -296,7 +288,8 @@
return readl(&io_apic->data);
}
-void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+static void io_apic_write(unsigned int apic, unsigned int reg,
+ unsigned int value)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
@@ -304,21 +297,6 @@
writel(value, &io_apic->data);
}
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
- struct io_apic __iomem *io_apic = io_apic_base(apic);
-
- if (sis_apic_bug)
- writel(reg, &io_apic->index);
- writel(value, &io_apic->data);
-}
-
union entry_union {
struct { u32 w1, w2; };
struct IO_APIC_route_entry entry;
@@ -378,7 +356,7 @@
static void ioapic_mask_entry(int apic, int pin)
{
unsigned long flags;
- union entry_union eu = { .entry.mask = 1 };
+ union entry_union eu = { .entry.mask = IOAPIC_MASKED };
raw_spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
@@ -391,16 +369,17 @@
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int __add_pin_to_irq_node(struct mp_chip_data *data,
+ int node, int apic, int pin)
{
struct irq_pin_list *entry;
/* don't allow duplicates */
- for_each_irq_pin(entry, cfg->irq_2_pin)
+ for_each_irq_pin(entry, data->irq_2_pin)
if (entry->apic == apic && entry->pin == pin)
return 0;
- entry = alloc_irq_pin_list(node);
+ entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node);
if (!entry) {
pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
node, apic, pin);
@@ -408,16 +387,16 @@
}
entry->apic = apic;
entry->pin = pin;
+ list_add_tail(&entry->list, &data->irq_2_pin);
- list_add_tail(&entry->list, &cfg->irq_2_pin);
return 0;
}
-static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
+static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
{
struct irq_pin_list *tmp, *entry;
- list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list)
+ list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list)
if (entry->apic == apic && entry->pin == pin) {
list_del(&entry->list);
kfree(entry);
@@ -425,22 +404,23 @@
}
}
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static void add_pin_to_irq_node(struct mp_chip_data *data,
+ int node, int apic, int pin)
{
- if (__add_pin_to_irq_node(cfg, node, apic, pin))
+ if (__add_pin_to_irq_node(data, node, apic, pin))
panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
}
/*
* Reroute an IRQ to a different pin.
*/
-static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
+static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node,
int oldapic, int oldpin,
int newapic, int newpin)
{
struct irq_pin_list *entry;
- for_each_irq_pin(entry, cfg->irq_2_pin) {
+ for_each_irq_pin(entry, data->irq_2_pin) {
if (entry->apic == oldapic && entry->pin == oldpin) {
entry->apic = newapic;
entry->pin = newpin;
@@ -450,32 +430,26 @@
}
/* old apic/pin didn't exist, so just add new ones */
- add_pin_to_irq_node(cfg, node, newapic, newpin);
+ add_pin_to_irq_node(data, node, newapic, newpin);
}
-static void __io_apic_modify_irq(struct irq_pin_list *entry,
- int mask_and, int mask_or,
- void (*final)(struct irq_pin_list *entry))
-{
- unsigned int reg, pin;
-
- pin = entry->pin;
- reg = io_apic_read(entry->apic, 0x10 + pin * 2);
- reg &= mask_and;
- reg |= mask_or;
- io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
- if (final)
- final(entry);
-}
-
-static void io_apic_modify_irq(struct irq_cfg *cfg,
+static void io_apic_modify_irq(struct mp_chip_data *data,
int mask_and, int mask_or,
void (*final)(struct irq_pin_list *entry))
{
+ union entry_union eu;
struct irq_pin_list *entry;
- for_each_irq_pin(entry, cfg->irq_2_pin)
- __io_apic_modify_irq(entry, mask_and, mask_or, final);
+ eu.entry = data->entry;
+ eu.w1 &= mask_and;
+ eu.w1 |= mask_or;
+ data->entry = eu.entry;
+
+ for_each_irq_pin(entry, data->irq_2_pin) {
+ io_apic_write(entry->apic, 0x10 + 2 * entry->pin, eu.w1);
+ if (final)
+ final(entry);
+ }
}
static void io_apic_sync(struct irq_pin_list *entry)
@@ -490,39 +464,31 @@
readl(&io_apic->data);
}
-static void mask_ioapic(struct irq_cfg *cfg)
+static void mask_ioapic_irq(struct irq_data *irq_data)
{
+ struct mp_chip_data *data = irq_data->chip_data;
unsigned long flags;
raw_spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
+ io_apic_modify_irq(data, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
-static void mask_ioapic_irq(struct irq_data *data)
+static void __unmask_ioapic(struct mp_chip_data *data)
{
- mask_ioapic(irqd_cfg(data));
+ io_apic_modify_irq(data, ~IO_APIC_REDIR_MASKED, 0, NULL);
}
-static void __unmask_ioapic(struct irq_cfg *cfg)
+static void unmask_ioapic_irq(struct irq_data *irq_data)
{
- io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
-}
-
-static void unmask_ioapic(struct irq_cfg *cfg)
-{
+ struct mp_chip_data *data = irq_data->chip_data;
unsigned long flags;
raw_spin_lock_irqsave(&ioapic_lock, flags);
- __unmask_ioapic(cfg);
+ __unmask_ioapic(data);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
-static void unmask_ioapic_irq(struct irq_data *data)
-{
- unmask_ioapic(irqd_cfg(data));
-}
-
/*
* IO-APIC versions below 0x20 don't support EOI register.
* For the record, here is the information about various versions:
@@ -539,7 +505,7 @@
* Otherwise, we simulate the EOI message manually by changing the trigger
* mode to edge and then back to level, with RTE being masked during this.
*/
-void native_eoi_ioapic_pin(int apic, int pin, int vector)
+static void __eoi_ioapic_pin(int apic, int pin, int vector)
{
if (mpc_ioapic_ver(apic) >= 0x20) {
io_apic_eoi(apic, vector);
@@ -551,7 +517,7 @@
/*
* Mask the entry and change the trigger mode to edge.
*/
- entry1.mask = 1;
+ entry1.mask = IOAPIC_MASKED;
entry1.trigger = IOAPIC_EDGE;
__ioapic_write_entry(apic, pin, entry1);
@@ -563,15 +529,14 @@
}
}
-void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+void eoi_ioapic_pin(int vector, struct mp_chip_data *data)
{
- struct irq_pin_list *entry;
unsigned long flags;
+ struct irq_pin_list *entry;
raw_spin_lock_irqsave(&ioapic_lock, flags);
- for_each_irq_pin(entry, cfg->irq_2_pin)
- x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
- cfg->vector);
+ for_each_irq_pin(entry, data->irq_2_pin)
+ __eoi_ioapic_pin(entry->apic, entry->pin, vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -588,8 +553,8 @@
* Make sure the entry is masked and re-read the contents to check
* if it is a level triggered pin and if the remote-IRR is set.
*/
- if (!entry.mask) {
- entry.mask = 1;
+ if (entry.mask == IOAPIC_UNMASKED) {
+ entry.mask = IOAPIC_MASKED;
ioapic_write_entry(apic, pin, entry);
entry = ioapic_read_entry(apic, pin);
}
@@ -602,13 +567,12 @@
* doesn't clear the remote-IRR if the trigger mode is not
* set to level.
*/
- if (!entry.trigger) {
+ if (entry.trigger == IOAPIC_EDGE) {
entry.trigger = IOAPIC_LEVEL;
ioapic_write_entry(apic, pin, entry);
}
-
raw_spin_lock_irqsave(&ioapic_lock, flags);
- x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector);
+ __eoi_ioapic_pin(apic, pin, entry.vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -706,8 +670,8 @@
struct IO_APIC_route_entry entry;
entry = ioapics[apic].saved_registers[pin];
- if (!entry.mask) {
- entry.mask = 1;
+ if (entry.mask == IOAPIC_UNMASKED) {
+ entry.mask = IOAPIC_MASKED;
ioapic_write_entry(apic, pin, entry);
}
}
@@ -809,11 +773,11 @@
#endif
-/* ISA interrupts are always polarity zero edge triggered,
+/* ISA interrupts are always active high edge triggered,
* when listed as conforming in the MP table. */
-#define default_ISA_trigger(idx) (0)
-#define default_ISA_polarity(idx) (0)
+#define default_ISA_trigger(idx) (IOAPIC_EDGE)
+#define default_ISA_polarity(idx) (IOAPIC_POL_HIGH)
/* EISA interrupts are always polarity zero and can be edge or level
* trigger depending on the ELCR value. If an interrupt is listed as
@@ -823,54 +787,56 @@
#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq))
#define default_EISA_polarity(idx) default_ISA_polarity(idx)
-/* PCI interrupts are always polarity one level triggered,
+/* PCI interrupts are always active low level triggered,
* when listed as conforming in the MP table. */
-#define default_PCI_trigger(idx) (1)
-#define default_PCI_polarity(idx) (1)
+#define default_PCI_trigger(idx) (IOAPIC_LEVEL)
+#define default_PCI_polarity(idx) (IOAPIC_POL_LOW)
static int irq_polarity(int idx)
{
int bus = mp_irqs[idx].srcbus;
- int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].irqflag & 3)
- {
- case 0: /* conforms, ie. bus-type dependent polarity */
- if (test_bit(bus, mp_bus_not_pci))
- polarity = default_ISA_polarity(idx);
- else
- polarity = default_PCI_polarity(idx);
- break;
- case 1: /* high active */
- {
- polarity = 0;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- polarity = 1;
- break;
- }
- case 3: /* low active */
- {
- polarity = 1;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- polarity = 1;
- break;
- }
+ switch (mp_irqs[idx].irqflag & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent polarity */
+ if (test_bit(bus, mp_bus_not_pci))
+ return default_ISA_polarity(idx);
+ else
+ return default_PCI_polarity(idx);
+ case 1:
+ return IOAPIC_POL_HIGH;
+ case 2:
+ pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_POL_LOW;
}
- return polarity;
}
+#ifdef CONFIG_EISA
+static int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ switch (mp_bus_id_to_type[bus]) {
+ case MP_BUS_PCI:
+ case MP_BUS_ISA:
+ return trigger;
+ case MP_BUS_EISA:
+ return default_EISA_trigger(idx);
+ }
+ pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
+ return IOAPIC_LEVEL;
+}
+#else
+static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ return trigger;
+}
+#endif
+
static int irq_trigger(int idx)
{
int bus = mp_irqs[idx].srcbus;
@@ -879,153 +845,227 @@
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].irqflag>>2) & 3)
- {
- case 0: /* conforms, ie. bus-type dependent */
- if (test_bit(bus, mp_bus_not_pci))
- trigger = default_ISA_trigger(idx);
- else
- trigger = default_PCI_trigger(idx);
-#ifdef CONFIG_EISA
- switch (mp_bus_id_to_type[bus]) {
- case MP_BUS_ISA: /* ISA pin */
- {
- /* set before the switch */
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- trigger = default_EISA_trigger(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /* set before the switch */
- break;
- }
- default:
- {
- pr_warn("broken BIOS!!\n");
- trigger = 1;
- break;
- }
- }
-#endif
- break;
- case 1: /* edge */
- {
- trigger = 0;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- trigger = 1;
- break;
- }
- case 3: /* level */
- {
- trigger = 1;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- trigger = 0;
- break;
- }
+ switch ((mp_irqs[idx].irqflag >> 2) & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent trigger mode */
+ if (test_bit(bus, mp_bus_not_pci))
+ trigger = default_ISA_trigger(idx);
+ else
+ trigger = default_PCI_trigger(idx);
+ /* Take EISA into account */
+ return eisa_irq_trigger(idx, bus, trigger);
+ case 1:
+ return IOAPIC_EDGE;
+ case 2:
+ pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_LEVEL;
}
- return trigger;
}
-static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin)
+void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,
+ int trigger, int polarity)
{
+ init_irq_alloc_info(info, NULL);
+ info->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+ info->ioapic_node = node;
+ info->ioapic_trigger = trigger;
+ info->ioapic_polarity = polarity;
+ info->ioapic_valid = 1;
+}
+
+#ifndef CONFIG_ACPI
+int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
+#endif
+
+static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
+ struct irq_alloc_info *src,
+ u32 gsi, int ioapic_idx, int pin)
+{
+ int trigger, polarity;
+
+ copy_irq_alloc_info(dst, src);
+ dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+ dst->ioapic_id = mpc_ioapic_id(ioapic_idx);
+ dst->ioapic_pin = pin;
+ dst->ioapic_valid = 1;
+ if (src && src->ioapic_valid) {
+ dst->ioapic_node = src->ioapic_node;
+ dst->ioapic_trigger = src->ioapic_trigger;
+ dst->ioapic_polarity = src->ioapic_polarity;
+ } else {
+ dst->ioapic_node = NUMA_NO_NODE;
+ if (acpi_get_override_irq(gsi, &trigger, &polarity) >= 0) {
+ dst->ioapic_trigger = trigger;
+ dst->ioapic_polarity = polarity;
+ } else {
+ /*
+ * PCI interrupts are always active low level
+ * triggered.
+ */
+ dst->ioapic_trigger = IOAPIC_LEVEL;
+ dst->ioapic_polarity = IOAPIC_POL_LOW;
+ }
+ }
+}
+
+static int ioapic_alloc_attr_node(struct irq_alloc_info *info)
+{
+ return (info && info->ioapic_valid) ? info->ioapic_node : NUMA_NO_NODE;
+}
+
+static void mp_register_handler(unsigned int irq, unsigned long trigger)
+{
+ irq_flow_handler_t hdl;
+ bool fasteoi;
+
+ if (trigger) {
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ fasteoi = true;
+ } else {
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ fasteoi = false;
+ }
+
+ hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
+ __irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge");
+}
+
+static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
+{
+ struct mp_chip_data *data = irq_get_chip_data(irq);
+
+ /*
+ * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger
+ * and polarity attirbutes. So allow the first user to reprogram the
+ * pin with real trigger and polarity attributes.
+ */
+ if (irq < nr_legacy_irqs() && data->count == 1) {
+ if (info->ioapic_trigger != data->trigger)
+ mp_register_handler(irq, data->trigger);
+ data->entry.trigger = data->trigger = info->ioapic_trigger;
+ data->entry.polarity = data->polarity = info->ioapic_polarity;
+ }
+
+ return data->trigger == info->ioapic_trigger &&
+ data->polarity == info->ioapic_polarity;
+}
+
+static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
+ struct irq_alloc_info *info)
+{
+ bool legacy = false;
int irq = -1;
- int ioapic = (int)(long)domain->host_data;
int type = ioapics[ioapic].irqdomain_cfg.type;
switch (type) {
case IOAPIC_DOMAIN_LEGACY:
/*
- * Dynamically allocate IRQ number for non-ISA IRQs in the first 16
- * GSIs on some weird platforms.
+ * Dynamically allocate IRQ number for non-ISA IRQs in the first
+ * 16 GSIs on some weird platforms.
*/
- if (gsi < nr_legacy_irqs())
- irq = irq_create_mapping(domain, pin);
- else if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
+ if (!ioapic_initialized || gsi >= nr_legacy_irqs())
irq = gsi;
+ legacy = mp_is_legacy_irq(irq);
break;
case IOAPIC_DOMAIN_STRICT:
- if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
- irq = gsi;
+ irq = gsi;
break;
case IOAPIC_DOMAIN_DYNAMIC:
- irq = irq_create_mapping(domain, pin);
break;
default:
WARN(1, "ioapic: unknown irqdomain type %d\n", type);
- break;
+ return -1;
}
- return irq > 0 ? irq : -1;
+ return __irq_domain_alloc_irqs(domain, irq, 1,
+ ioapic_alloc_attr_node(info),
+ info, legacy);
+}
+
+/*
+ * Need special handling for ISA IRQs because there may be multiple IOAPIC pins
+ * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping
+ * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are
+ * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
+ * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and
+ * some BIOSes may use MP Interrupt Source records to override IRQ numbers for
+ * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be
+ * multiple pins sharing the same legacy IRQ number when ACPI is disabled.
+ */
+static int alloc_isa_irq_from_domain(struct irq_domain *domain,
+ int irq, int ioapic, int pin,
+ struct irq_alloc_info *info)
+{
+ struct mp_chip_data *data;
+ struct irq_data *irq_data = irq_get_irq_data(irq);
+ int node = ioapic_alloc_attr_node(info);
+
+ /*
+ * Legacy ISA IRQ has already been allocated, just add pin to
+ * the pin list assoicated with this IRQ and program the IOAPIC
+ * entry. The IOAPIC entry
+ */
+ if (irq_data && irq_data->parent_data) {
+ if (!mp_check_pin_attr(irq, info))
+ return -EBUSY;
+ if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic,
+ info->ioapic_pin))
+ return -ENOMEM;
+ } else {
+ irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true);
+ if (irq >= 0) {
+ irq_data = irq_domain_get_irq_data(domain, irq);
+ data = irq_data->chip_data;
+ data->isa_irq = true;
+ }
+ }
+
+ return irq;
}
static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
- unsigned int flags)
+ unsigned int flags, struct irq_alloc_info *info)
{
int irq;
+ bool legacy = false;
+ struct irq_alloc_info tmp;
+ struct mp_chip_data *data;
struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
- struct mp_pin_info *info = mp_pin_info(ioapic, pin);
if (!domain)
- return -1;
+ return -ENOSYS;
- mutex_lock(&ioapic_mutex);
-
- /*
- * Don't use irqdomain to manage ISA IRQs because there may be
- * multiple IOAPIC pins sharing the same ISA IRQ number and
- * irqdomain only supports 1:1 mapping between IOAPIC pin and
- * IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are used
- * for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
- * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are
- * available, and some BIOSes may use MP Interrupt Source records
- * to override IRQ numbers for PIRQs instead of reprogramming
- * the interrupt routing logic. Thus there may be multiple pins
- * sharing the same legacy IRQ number when ACPI is disabled.
- */
if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) {
irq = mp_irqs[idx].srcbusirq;
- if (flags & IOAPIC_MAP_ALLOC) {
- if (info->count == 0 &&
- mp_irqdomain_map(domain, irq, pin) != 0)
- irq = -1;
+ legacy = mp_is_legacy_irq(irq);
+ }
- /* special handling for timer IRQ0 */
+ mutex_lock(&ioapic_mutex);
+ if (!(flags & IOAPIC_MAP_ALLOC)) {
+ if (!legacy) {
+ irq = irq_find_mapping(domain, pin);
if (irq == 0)
- info->count++;
+ irq = -ENOENT;
}
} else {
- irq = irq_find_mapping(domain, pin);
- if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC))
- irq = alloc_irq_from_domain(domain, gsi, pin);
+ ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin);
+ if (legacy)
+ irq = alloc_isa_irq_from_domain(domain, irq,
+ ioapic, pin, &tmp);
+ else if ((irq = irq_find_mapping(domain, pin)) == 0)
+ irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp);
+ else if (!mp_check_pin_attr(irq, &tmp))
+ irq = -EBUSY;
+ if (irq >= 0) {
+ data = irq_get_chip_data(irq);
+ data->count++;
+ }
}
-
- if (flags & IOAPIC_MAP_ALLOC) {
- /* special handling for legacy IRQs */
- if (irq < nr_legacy_irqs() && info->count == 1 &&
- mp_irqdomain_map(domain, irq, pin) != 0)
- irq = -1;
-
- if (irq > 0)
- info->count++;
- else if (info->count == 0)
- info->set = 0;
- }
-
mutex_unlock(&ioapic_mutex);
- return irq > 0 ? irq : -1;
+ return irq;
}
static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
@@ -1058,10 +1098,10 @@
}
#endif
- return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+ return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL);
}
-int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)
+int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info)
{
int ioapic, pin, idx;
@@ -1074,31 +1114,24 @@
if ((flags & IOAPIC_MAP_CHECK) && idx < 0)
return -1;
- return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+ return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info);
}
void mp_unmap_irq(int irq)
{
- struct irq_data *data = irq_get_irq_data(irq);
- struct mp_pin_info *info;
- int ioapic, pin;
+ struct irq_data *irq_data = irq_get_irq_data(irq);
+ struct mp_chip_data *data;
- if (!data || !data->domain)
+ if (!irq_data || !irq_data->domain)
return;
- ioapic = (int)(long)data->domain->host_data;
- pin = (int)data->hwirq;
- info = mp_pin_info(ioapic, pin);
+ data = irq_data->chip_data;
+ if (!data || data->isa_irq)
+ return;
mutex_lock(&ioapic_mutex);
- if (--info->count == 0) {
- info->set = 0;
- if (irq < nr_legacy_irqs() &&
- ioapics[ioapic].irqdomain_cfg.type == IOAPIC_DOMAIN_LEGACY)
- mp_irqdomain_unmap(data->domain, irq);
- else
- irq_dispose_mapping(irq);
- }
+ if (--data->count == 0)
+ irq_domain_free_irqs(irq, 1);
mutex_unlock(&ioapic_mutex);
}
@@ -1165,7 +1198,7 @@
}
EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-static struct irq_chip ioapic_chip;
+static struct irq_chip ioapic_chip, ioapic_ir_chip;
#ifdef CONFIG_X86_32
static inline int IO_APIC_irq_trigger(int irq)
@@ -1189,96 +1222,6 @@
}
#endif
-static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
- unsigned long trigger)
-{
- struct irq_chip *chip = &ioapic_chip;
- irq_flow_handler_t hdl;
- bool fasteoi;
-
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL) {
- irq_set_status_flags(irq, IRQ_LEVEL);
- fasteoi = true;
- } else {
- irq_clear_status_flags(irq, IRQ_LEVEL);
- fasteoi = false;
- }
-
- if (setup_remapped_irq(irq, cfg, chip))
- fasteoi = trigger != 0;
-
- hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
- irq_set_chip_and_handler_name(irq, chip, hdl,
- fasteoi ? "fasteoi" : "edge");
-}
-
-int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
-{
- memset(entry, 0, sizeof(*entry));
-
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->dest = destination;
- entry->vector = vector;
- entry->mask = 0; /* enable IRQ */
- entry->trigger = attr->trigger;
- entry->polarity = attr->polarity;
-
- /*
- * Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
- */
- if (attr->trigger)
- entry->mask = 1;
-
- return 0;
-}
-
-static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
- struct io_apic_irq_attr *attr)
-{
- struct IO_APIC_route_entry entry;
- unsigned int dest;
-
- if (!IO_APIC_IRQ(irq))
- return;
-
- if (assign_irq_vector(irq, cfg, apic->target_cpus()))
- return;
-
- if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(),
- &dest)) {
- pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
- mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
- clear_irq_vector(irq, cfg);
-
- return;
- }
-
- apic_printk(APIC_VERBOSE,KERN_DEBUG
- "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
- "IRQ %d Mode:%i Active:%i Dest:%d)\n",
- attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin,
- cfg->vector, irq, attr->trigger, attr->polarity, dest);
-
- if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) {
- pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
- mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
- clear_irq_vector(irq, cfg);
-
- return;
- }
-
- ioapic_register_intr(irq, cfg, attr->trigger);
- if (irq < nr_legacy_irqs())
- legacy_pic->mask(irq);
-
- ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry);
-}
-
static void __init setup_IO_APIC_irqs(void)
{
unsigned int ioapic, pin;
@@ -1298,106 +1241,41 @@
}
}
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
- unsigned int pin, int vector)
-{
- struct IO_APIC_route_entry entry;
- unsigned int dest;
-
- memset(&entry, 0, sizeof(entry));
-
- /*
- * We use logical delivery to get the timer IRQ
- * to the first CPU.
- */
- if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(),
- apic->target_cpus(), &dest)))
- dest = BAD_APICID;
-
- entry.dest_mode = apic->irq_dest_mode;
- entry.mask = 0; /* don't mask IRQ for edge */
- entry.dest = dest;
- entry.delivery_mode = apic->irq_delivery_mode;
- entry.polarity = 0;
- entry.trigger = 0;
- entry.vector = vector;
-
- /*
- * The timer IRQ doesn't have to know that behind the
- * scene we may have a 8259A-master in AEOI mode ...
- */
- irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
- "edge");
-
- /*
- * Add it to the IO-APIC irq-routing table:
- */
- ioapic_write_entry(ioapic_idx, pin, entry);
-}
-
-void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
-{
- int i;
-
- pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n");
-
- for (i = 0; i <= nr_entries; i++) {
- struct IO_APIC_route_entry entry;
-
- entry = ioapic_read_entry(apic, i);
-
- pr_debug(" %02x %02X ", i, entry.dest);
- pr_cont("%1d %1d %1d %1d %1d "
- "%1d %1d %02X\n",
- entry.mask,
- entry.trigger,
- entry.irr,
- entry.polarity,
- entry.delivery_status,
- entry.dest_mode,
- entry.delivery_mode,
- entry.vector);
- }
-}
-
-void intel_ir_io_apic_print_entries(unsigned int apic,
- unsigned int nr_entries)
-{
- int i;
-
- pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n");
-
- for (i = 0; i <= nr_entries; i++) {
- struct IR_IO_APIC_route_entry *ir_entry;
- struct IO_APIC_route_entry entry;
-
- entry = ioapic_read_entry(apic, i);
-
- ir_entry = (struct IR_IO_APIC_route_entry *)&entry;
-
- pr_debug(" %02x %04X ", i, ir_entry->index);
- pr_cont("%1d %1d %1d %1d %1d "
- "%1d %1d %X %02X\n",
- ir_entry->format,
- ir_entry->mask,
- ir_entry->trigger,
- ir_entry->irr,
- ir_entry->polarity,
- ir_entry->delivery_status,
- ir_entry->index2,
- ir_entry->zero,
- ir_entry->vector);
- }
-}
-
void ioapic_zap_locks(void)
{
raw_spin_lock_init(&ioapic_lock);
}
+static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
+{
+ int i;
+ char buf[256];
+ struct IO_APIC_route_entry entry;
+ struct IR_IO_APIC_route_entry *ir_entry = (void *)&entry;
+
+ printk(KERN_DEBUG "IOAPIC %d:\n", apic);
+ for (i = 0; i <= nr_entries; i++) {
+ entry = ioapic_read_entry(apic, i);
+ snprintf(buf, sizeof(buf),
+ " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)",
+ i,
+ entry.mask == IOAPIC_MASKED ? "disabled" : "enabled ",
+ entry.trigger == IOAPIC_LEVEL ? "level" : "edge ",
+ entry.polarity == IOAPIC_POL_LOW ? "low " : "high",
+ entry.vector, entry.irr, entry.delivery_status);
+ if (ir_entry->format)
+ printk(KERN_DEBUG "%s, remapped, I(%04X), Z(%X)\n",
+ buf, (ir_entry->index << 15) | ir_entry->index,
+ ir_entry->zero);
+ else
+ printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n",
+ buf,
+ entry.dest_mode == IOAPIC_DEST_MODE_LOGICAL ?
+ "logical " : "physical",
+ entry.dest, entry.delivery_mode);
+ }
+}
+
static void __init print_IO_APIC(int ioapic_idx)
{
union IO_APIC_reg_00 reg_00;
@@ -1451,16 +1329,13 @@
}
printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
- x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries);
+ io_apic_print_entries(ioapic_idx, reg_01.bits.entries);
}
void __init print_IO_APICs(void)
{
int ioapic_idx;
- struct irq_cfg *cfg;
unsigned int irq;
- struct irq_chip *chip;
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for_each_ioapic(ioapic_idx)
@@ -1480,18 +1355,20 @@
printk(KERN_DEBUG "IRQ to pin mappings:\n");
for_each_active_irq(irq) {
struct irq_pin_list *entry;
+ struct irq_chip *chip;
+ struct mp_chip_data *data;
chip = irq_get_chip(irq);
- if (chip != &ioapic_chip)
+ if (chip != &ioapic_chip && chip != &ioapic_ir_chip)
+ continue;
+ data = irq_get_chip_data(irq);
+ if (!data)
+ continue;
+ if (list_empty(&data->irq_2_pin))
continue;
- cfg = irq_cfg(irq);
- if (!cfg)
- continue;
- if (list_empty(&cfg->irq_2_pin))
- continue;
printk(KERN_DEBUG "IRQ%d ", irq);
- for_each_irq_pin(entry, cfg->irq_2_pin)
+ for_each_irq_pin(entry, data->irq_2_pin)
pr_cont("-> %d:%d", entry->apic, entry->pin);
pr_cont("\n");
}
@@ -1564,15 +1441,12 @@
struct IO_APIC_route_entry entry;
memset(&entry, 0, sizeof(entry));
- entry.mask = 0; /* Enabled */
- entry.trigger = 0; /* Edge */
- entry.irr = 0;
- entry.polarity = 0; /* High */
- entry.delivery_status = 0;
- entry.dest_mode = 0; /* Physical */
- entry.delivery_mode = dest_ExtINT; /* ExtInt */
- entry.vector = 0;
- entry.dest = read_apic_id();
+ entry.mask = IOAPIC_UNMASKED;
+ entry.trigger = IOAPIC_EDGE;
+ entry.polarity = IOAPIC_POL_HIGH;
+ entry.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+ entry.delivery_mode = dest_ExtINT;
+ entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
@@ -1582,7 +1456,6 @@
if (cpu_has_apic || apic_from_smp_config())
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-
}
/*
@@ -1792,7 +1665,6 @@
* This is not complete - we should be able to fake
* an edge even if it isn't on the 8259A...
*/
-
static unsigned int startup_ioapic_irq(struct irq_data *data)
{
int was_pending = 0, irq = data->irq;
@@ -1804,74 +1676,22 @@
if (legacy_pic->irq_pending(irq))
was_pending = 1;
}
- __unmask_ioapic(irqd_cfg(data));
+ __unmask_ioapic(data->chip_data);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
return was_pending;
}
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
- u8 vector = cfg->vector;
-
- for_each_irq_pin(entry, cfg->irq_2_pin) {
- unsigned int reg;
-
- apic = entry->apic;
- pin = entry->pin;
-
- io_apic_write(apic, 0x11 + pin*2, dest);
- reg = io_apic_read(apic, 0x10 + pin*2);
- reg &= ~IO_APIC_REDIR_VECTOR_MASK;
- reg |= vector;
- io_apic_modify(apic, 0x10 + pin*2, reg);
- }
-}
-
-int native_ioapic_set_affinity(struct irq_data *data,
- const struct cpumask *mask,
- bool force)
-{
- unsigned int dest, irq = data->irq;
- unsigned long flags;
- int ret;
-
- if (!config_enabled(CONFIG_SMP))
- return -EPERM;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- ret = apic_set_affinity(data, mask, &dest);
- if (!ret) {
- /* Only the high 8 bits are valid. */
- dest = SET_APIC_LOGICAL_ID(dest);
- __target_IO_APIC_irq(irq, dest, irqd_cfg(data));
- ret = IRQ_SET_MASK_OK_NOCOPY;
- }
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- return ret;
-}
-
atomic_t irq_mis_count;
#ifdef CONFIG_GENERIC_PENDING_IRQ
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+static bool io_apic_level_ack_pending(struct mp_chip_data *data)
{
struct irq_pin_list *entry;
unsigned long flags;
raw_spin_lock_irqsave(&ioapic_lock, flags);
- for_each_irq_pin(entry, cfg->irq_2_pin) {
+ for_each_irq_pin(entry, data->irq_2_pin) {
unsigned int reg;
int pin;
@@ -1888,18 +1708,17 @@
return false;
}
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
{
/* If we are moving the irq we need to mask it */
if (unlikely(irqd_is_setaffinity_pending(data))) {
- mask_ioapic(cfg);
+ mask_ioapic_irq(data);
return true;
}
return false;
}
-static inline void ioapic_irqd_unmask(struct irq_data *data,
- struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
{
if (unlikely(masked)) {
/* Only migrate the irq if the ack has been received.
@@ -1928,31 +1747,30 @@
* accurate and is causing problems then it is a hardware bug
* and you can go talk to the chipset vendor about it.
*/
- if (!io_apic_level_ack_pending(cfg))
+ if (!io_apic_level_ack_pending(data->chip_data))
irq_move_masked_irq(data);
- unmask_ioapic(cfg);
+ unmask_ioapic_irq(data);
}
}
#else
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
{
return false;
}
-static inline void ioapic_irqd_unmask(struct irq_data *data,
- struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
{
}
#endif
-static void ack_ioapic_level(struct irq_data *data)
+static void ioapic_ack_level(struct irq_data *irq_data)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- int i, irq = data->irq;
+ struct irq_cfg *cfg = irqd_cfg(irq_data);
unsigned long v;
bool masked;
+ int i;
irq_complete_move(cfg);
- masked = ioapic_irqd_mask(data, cfg);
+ masked = ioapic_irqd_mask(irq_data);
/*
* It appears there is an erratum which affects at least version 0x11
@@ -2004,11 +1822,49 @@
*/
if (!(v & (1 << (i & 0x1f)))) {
atomic_inc(&irq_mis_count);
-
- eoi_ioapic_irq(irq, cfg);
+ eoi_ioapic_pin(cfg->vector, irq_data->chip_data);
}
- ioapic_irqd_unmask(data, cfg, masked);
+ ioapic_irqd_unmask(irq_data, masked);
+}
+
+static void ioapic_ir_ack_level(struct irq_data *irq_data)
+{
+ struct mp_chip_data *data = irq_data->chip_data;
+
+ /*
+ * Intr-remapping uses pin number as the virtual vector
+ * in the RTE. Actual vector is programmed in
+ * intr-remapping table entry. Hence for the io-apic
+ * EOI we use the pin number.
+ */
+ ack_APIC_irq();
+ eoi_ioapic_pin(data->entry.vector, data);
+}
+
+static int ioapic_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ struct irq_data *parent = irq_data->parent_data;
+ struct mp_chip_data *data = irq_data->chip_data;
+ struct irq_pin_list *entry;
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ int ret;
+
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) {
+ cfg = irqd_cfg(irq_data);
+ data->entry.dest = cfg->dest_apicid;
+ data->entry.vector = cfg->vector;
+ for_each_irq_pin(entry, data->irq_2_pin)
+ __ioapic_write_entry(entry->apic, entry->pin,
+ data->entry);
+ }
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return ret;
}
static struct irq_chip ioapic_chip __read_mostly = {
@@ -2016,10 +1872,20 @@
.irq_startup = startup_ioapic_irq,
.irq_mask = mask_ioapic_irq,
.irq_unmask = unmask_ioapic_irq,
- .irq_ack = apic_ack_edge,
- .irq_eoi = ack_ioapic_level,
- .irq_set_affinity = native_ioapic_set_affinity,
- .irq_retrigger = apic_retrigger_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_eoi = ioapic_ack_level,
+ .irq_set_affinity = ioapic_set_affinity,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+static struct irq_chip ioapic_ir_chip __read_mostly = {
+ .name = "IR-IO-APIC",
+ .irq_startup = startup_ioapic_irq,
+ .irq_mask = mask_ioapic_irq,
+ .irq_unmask = unmask_ioapic_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_eoi = ioapic_ir_ack_level,
+ .irq_set_affinity = ioapic_set_affinity,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
@@ -2113,12 +1979,12 @@
memset(&entry1, 0, sizeof(entry1));
- entry1.dest_mode = 0; /* physical delivery */
- entry1.mask = 0; /* unmask IRQ now */
+ entry1.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+ entry1.mask = IOAPIC_UNMASKED;
entry1.dest = hard_smp_processor_id();
entry1.delivery_mode = dest_ExtINT;
entry1.polarity = entry0.polarity;
- entry1.trigger = 0;
+ entry1.trigger = IOAPIC_EDGE;
entry1.vector = 0;
ioapic_write_entry(apic, pin, entry1);
@@ -2152,6 +2018,25 @@
}
early_param("disable_timer_pin_1", disable_timer_pin_setup);
+static int mp_alloc_timer_irq(int ioapic, int pin)
+{
+ int irq = -1;
+ struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
+
+ if (domain) {
+ struct irq_alloc_info info;
+
+ ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0);
+ info.ioapic_id = mpc_ioapic_id(ioapic);
+ info.ioapic_pin = pin;
+ mutex_lock(&ioapic_mutex);
+ irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info);
+ mutex_unlock(&ioapic_mutex);
+ }
+
+ return irq;
+}
+
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
@@ -2162,7 +2047,9 @@
*/
static inline void __init check_timer(void)
{
- struct irq_cfg *cfg = irq_cfg(0);
+ struct irq_data *irq_data = irq_get_irq_data(0);
+ struct mp_chip_data *data = irq_data->chip_data;
+ struct irq_cfg *cfg = irqd_cfg(irq_data);
int node = cpu_to_node(0);
int apic1, pin1, apic2, pin2;
unsigned long flags;
@@ -2174,7 +2061,6 @@
* get/set the timer IRQ vector:
*/
legacy_pic->mask(0);
- assign_irq_vector(0, cfg, apic->target_cpus());
/*
* As IRQ0 is to be enabled in the 8259A, the virtual
@@ -2215,23 +2101,21 @@
}
if (pin1 != -1) {
- /*
- * Ok, does IRQ0 through the IOAPIC work?
- */
+ /* Ok, does IRQ0 through the IOAPIC work? */
if (no_pin1) {
- add_pin_to_irq_node(cfg, node, apic1, pin1);
- setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+ mp_alloc_timer_irq(apic1, pin1);
} else {
- /* for edge trigger, setup_ioapic_irq already
- * leave it unmasked.
+ /*
+ * for edge trigger, it's already unmasked,
* so only need to unmask if it is level-trigger
* do we really have level trigger timer?
*/
int idx;
idx = find_irq_entry(apic1, pin1, mp_INT);
if (idx != -1 && irq_trigger(idx))
- unmask_ioapic(cfg);
+ unmask_ioapic_irq(irq_get_chip_data(0));
}
+ irq_domain_activate_irq(irq_data);
if (timer_irq_works()) {
if (disable_timer_pin_1 > 0)
clear_IO_APIC_pin(0, pin1);
@@ -2251,8 +2135,8 @@
/*
* legacy devices should be connected to IO APIC #0
*/
- replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
- setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+ replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
+ irq_domain_activate_irq(irq_data);
legacy_pic->unmask(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2329,36 +2213,35 @@
static int mp_irqdomain_create(int ioapic)
{
- size_t size;
+ struct irq_alloc_info info;
+ struct irq_domain *parent;
int hwirqs = mp_ioapic_pin_count(ioapic);
struct ioapic *ip = &ioapics[ioapic];
struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg;
struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic);
- size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic);
- ip->pin_info = kzalloc(size, GFP_KERNEL);
- if (!ip->pin_info)
- return -ENOMEM;
-
if (cfg->type == IOAPIC_DOMAIN_INVALID)
return 0;
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+ info.ioapic_id = mpc_ioapic_id(ioapic);
+ parent = irq_remapping_get_ir_irq_domain(&info);
+ if (!parent)
+ parent = x86_vector_domain;
+
ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops,
(void *)(long)ioapic);
- if(!ip->irqdomain) {
- kfree(ip->pin_info);
- ip->pin_info = NULL;
+ if (!ip->irqdomain)
return -ENOMEM;
- }
+
+ ip->irqdomain->parent = parent;
if (cfg->type == IOAPIC_DOMAIN_LEGACY ||
cfg->type == IOAPIC_DOMAIN_STRICT)
ioapic_dynirq_base = max(ioapic_dynirq_base,
gsi_cfg->gsi_end + 1);
- if (gsi_cfg->gsi_base == 0)
- irq_set_default_host(ip->irqdomain);
-
return 0;
}
@@ -2368,8 +2251,6 @@
irq_domain_remove(ioapics[idx].irqdomain);
ioapics[idx].irqdomain = NULL;
}
- kfree(ioapics[idx].pin_info);
- ioapics[idx].pin_info = NULL;
}
void __init setup_IO_APIC(void)
@@ -2399,20 +2280,6 @@
ioapic_initialized = 1;
}
-/*
- * Called after all the initialization is done. If we didn't find any
- * APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
- if (sis_apic_bug == -1)
- sis_apic_bug = 0;
- return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
static void resume_ioapic_id(int ioapic_idx)
{
unsigned long flags;
@@ -2451,20 +2318,6 @@
device_initcall(ioapic_init_ops);
-static int
-io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
-{
- struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node);
- int ret;
-
- if (!cfg)
- return -EINVAL;
- ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin);
- if (!ret)
- setup_ioapic_irq(irq, cfg, attr);
- return ret;
-}
-
static int io_apic_get_redir_entries(int ioapic)
{
union IO_APIC_reg_01 reg_01;
@@ -2692,7 +2545,7 @@
else
mask = apic->target_cpus();
- x86_io_apic_ops.set_affinity(idata, mask, false);
+ irq_set_affinity(irq, mask);
}
}
@@ -2737,7 +2590,7 @@
return res;
}
-void __init native_io_apic_init_mappings(void)
+void __init io_apic_init_mappings(void)
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
struct resource *ioapic_res;
@@ -2962,7 +2815,6 @@
{
int ioapic, pin;
int found = 0;
- struct mp_pin_info *pin_info;
for_each_ioapic(ioapic)
if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) {
@@ -2975,11 +2827,17 @@
}
for_each_pin(ioapic, pin) {
- pin_info = mp_pin_info(ioapic, pin);
- if (pin_info->count) {
- pr_warn("pin%d on IOAPIC%d is still in use.\n",
- pin, ioapic);
- return -EBUSY;
+ u32 gsi = mp_pin_to_gsi(ioapic, pin);
+ int irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+ struct mp_chip_data *data;
+
+ if (irq >= 0) {
+ data = irq_get_chip_data(irq);
+ if (data && data->count) {
+ pr_warn("pin%d on IOAPIC%d is still in use.\n",
+ pin, ioapic);
+ return -EBUSY;
+ }
}
}
@@ -3006,108 +2864,141 @@
return 0;
}
-static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
- int ioapic, int ioapic_pin,
- int trigger, int polarity)
+static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data,
+ struct irq_alloc_info *info)
{
- irq_attr->ioapic = ioapic;
- irq_attr->ioapic_pin = ioapic_pin;
- irq_attr->trigger = trigger;
- irq_attr->polarity = polarity;
-}
-
-int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- int ioapic = (int)(long)domain->host_data;
- struct mp_pin_info *info = mp_pin_info(ioapic, hwirq);
- struct io_apic_irq_attr attr;
-
- /* Get default attribute if not set by caller yet */
- if (!info->set) {
- u32 gsi = mp_pin_to_gsi(ioapic, hwirq);
-
- if (acpi_get_override_irq(gsi, &info->trigger,
- &info->polarity) < 0) {
- /*
- * PCI interrupts are always polarity one level
- * triggered.
- */
- info->trigger = 1;
- info->polarity = 1;
- }
- info->node = NUMA_NO_NODE;
-
- /*
- * setup_IO_APIC_irqs() programs all legacy IRQs with default
- * trigger and polarity attributes. Don't set the flag for that
- * case so the first legacy IRQ user could reprogram the pin
- * with real trigger and polarity attributes.
- */
- if (virq >= nr_legacy_irqs() || info->count)
- info->set = 1;
+ if (info && info->ioapic_valid) {
+ data->trigger = info->ioapic_trigger;
+ data->polarity = info->ioapic_polarity;
+ } else if (acpi_get_override_irq(gsi, &data->trigger,
+ &data->polarity) < 0) {
+ /* PCI interrupts are always active low level triggered. */
+ data->trigger = IOAPIC_LEVEL;
+ data->polarity = IOAPIC_POL_LOW;
}
- set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger,
- info->polarity);
-
- return io_apic_setup_irq_pin(virq, info->node, &attr);
}
-void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq)
+static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data,
+ struct IO_APIC_route_entry *entry)
{
- struct irq_data *data = irq_get_irq_data(virq);
- struct irq_cfg *cfg = irq_cfg(virq);
- int ioapic = (int)(long)domain->host_data;
- int pin = (int)data->hwirq;
-
- ioapic_mask_entry(ioapic, pin);
- __remove_pin_from_irq(cfg, ioapic, pin);
- WARN_ON(!list_empty(&cfg->irq_2_pin));
- arch_teardown_hwirq(virq);
+ memset(entry, 0, sizeof(*entry));
+ entry->delivery_mode = apic->irq_delivery_mode;
+ entry->dest_mode = apic->irq_dest_mode;
+ entry->dest = cfg->dest_apicid;
+ entry->vector = cfg->vector;
+ entry->trigger = data->trigger;
+ entry->polarity = data->polarity;
+ /*
+ * Mask level triggered irqs. Edge triggered irqs are masked
+ * by the irq core code in case they fire.
+ */
+ if (data->trigger == IOAPIC_LEVEL)
+ entry->mask = IOAPIC_MASKED;
+ else
+ entry->mask = IOAPIC_UNMASKED;
}
-int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node)
+int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
{
- int ret = 0;
- int ioapic, pin;
- struct mp_pin_info *info;
+ int ret, ioapic, pin;
+ struct irq_cfg *cfg;
+ struct irq_data *irq_data;
+ struct mp_chip_data *data;
+ struct irq_alloc_info *info = arg;
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return -ENODEV;
+ if (!info || nr_irqs > 1)
+ return -EINVAL;
+ irq_data = irq_domain_get_irq_data(domain, virq);
+ if (!irq_data)
+ return -EINVAL;
- pin = mp_find_ioapic_pin(ioapic, gsi);
- info = mp_pin_info(ioapic, pin);
- trigger = trigger ? 1 : 0;
- polarity = polarity ? 1 : 0;
+ ioapic = mp_irqdomain_ioapic_idx(domain);
+ pin = info->ioapic_pin;
+ if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0)
+ return -EEXIST;
- mutex_lock(&ioapic_mutex);
- if (!info->set) {
- info->trigger = trigger;
- info->polarity = polarity;
- info->node = node;
- info->set = 1;
- } else if (info->trigger != trigger || info->polarity != polarity) {
- ret = -EBUSY;
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ info->ioapic_entry = &data->entry;
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
+ if (ret < 0) {
+ kfree(data);
+ return ret;
}
- mutex_unlock(&ioapic_mutex);
- return ret;
+ INIT_LIST_HEAD(&data->irq_2_pin);
+ irq_data->hwirq = info->ioapic_pin;
+ irq_data->chip = (domain->parent == x86_vector_domain) ?
+ &ioapic_chip : &ioapic_ir_chip;
+ irq_data->chip_data = data;
+ mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);
+
+ cfg = irqd_cfg(irq_data);
+ add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+ if (info->ioapic_entry)
+ mp_setup_entry(cfg, data, info->ioapic_entry);
+ mp_register_handler(virq, data->trigger);
+ if (virq < nr_legacy_irqs())
+ legacy_pic->mask(virq);
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG
+ "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
+ ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector,
+ virq, data->trigger, data->polarity, cfg->dest_apicid);
+
+ return 0;
}
-/* Enable IOAPIC early just for system timer */
-void __init pre_init_apic_IRQ0(void)
+void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
{
- struct io_apic_irq_attr attr = { 0, 0, 0, 0 };
+ struct irq_data *irq_data;
+ struct mp_chip_data *data;
- printk(KERN_INFO "Early APIC setup for system timer0\n");
-#ifndef CONFIG_SMP
- physid_set_mask_of_physid(boot_cpu_physical_apicid,
- &phys_cpu_present_map);
-#endif
- setup_local_APIC();
-
- io_apic_setup_irq_pin(0, 0, &attr);
- irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
- "edge");
+ BUG_ON(nr_irqs != 1);
+ irq_data = irq_domain_get_irq_data(domain, virq);
+ if (irq_data && irq_data->chip_data) {
+ data = irq_data->chip_data;
+ __remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain),
+ (int)irq_data->hwirq);
+ WARN_ON(!list_empty(&data->irq_2_pin));
+ kfree(irq_data->chip_data);
+ }
+ irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
+
+void mp_irqdomain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ unsigned long flags;
+ struct irq_pin_list *entry;
+ struct mp_chip_data *data = irq_data->chip_data;
+
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ for_each_irq_pin(entry, data->irq_2_pin)
+ __ioapic_write_entry(entry->apic, entry->pin, data->entry);
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+void mp_irqdomain_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ /* It won't be called for IRQ with multiple IOAPIC pins associated */
+ ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain),
+ (int)irq_data->hwirq);
+}
+
+int mp_irqdomain_ioapic_idx(struct irq_domain *domain)
+{
+ return (int)(long)domain->host_data;
+}
+
+const struct irq_domain_ops mp_ioapic_irqdomain_ops = {
+ .alloc = mp_irqdomain_alloc,
+ .free = mp_irqdomain_free,
+ .activate = mp_irqdomain_activate,
+ .deactivate = mp_irqdomain_deactivate,
+};
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index d6ba2d6..1a9d735 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -3,6 +3,8 @@
*
* Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
* Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ * Convert to hierarchical irqdomain
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,22 +16,23 @@
#include <linux/dmar.h>
#include <linux/hpet.h>
#include <linux/msi.h>
+#include <asm/irqdomain.h>
#include <asm/msidef.h>
#include <asm/hpet.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/irq_remapping.h>
-void native_compose_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
+static struct irq_domain *msi_default_domain;
+
+static void irq_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
{
- struct irq_cfg *cfg = irq_cfg(irq);
+ struct irq_cfg *cfg = irqd_cfg(data);
msg->address_hi = MSI_ADDR_BASE_HI;
if (x2apic_enabled())
- msg->address_hi |= MSI_ADDR_EXT_DEST_ID(dest);
+ msg->address_hi |= MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid);
msg->address_lo =
MSI_ADDR_BASE_LO |
@@ -39,7 +42,7 @@
((apic->irq_delivery_mode != dest_LowestPrio) ?
MSI_ADDR_REDIRECTION_CPU :
MSI_ADDR_REDIRECTION_LOWPRI) |
- MSI_ADDR_DEST_ID(dest);
+ MSI_ADDR_DEST_ID(cfg->dest_apicid);
msg->data =
MSI_DATA_TRIGGER_EDGE |
@@ -50,237 +53,305 @@
MSI_DATA_VECTOR(cfg->vector);
}
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
- struct msi_msg *msg, u8 hpet_id)
-{
- struct irq_cfg *cfg;
- int err;
- unsigned dest;
-
- if (disable_apic)
- return -ENXIO;
-
- cfg = irq_cfg(irq);
- err = assign_irq_vector(irq, cfg, apic->target_cpus());
- if (err)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(cfg->domain,
- apic->target_cpus(), &dest);
- if (err)
- return err;
-
- x86_msi.compose_msi_msg(pdev, irq, dest, msg, hpet_id);
-
- return 0;
-}
-
-static int
-msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
-{
- struct irq_cfg *cfg = irqd_cfg(data);
- struct msi_msg msg;
- unsigned int dest;
- int ret;
-
- ret = apic_set_affinity(data, mask, &dest);
- if (ret)
- return ret;
-
- __get_cached_msi_msg(data->msi_desc, &msg);
-
- msg.data &= ~MSI_DATA_VECTOR_MASK;
- msg.data |= MSI_DATA_VECTOR(cfg->vector);
- msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
- msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
- __pci_write_msi_msg(data->msi_desc, &msg);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-
/*
* IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
* which implement the MSI or MSI-X Capability Structure.
*/
-static struct irq_chip msi_chip = {
+static struct irq_chip pci_msi_controller = {
.name = "PCI-MSI",
.irq_unmask = pci_msi_unmask_irq,
.irq_mask = pci_msi_mask_irq,
- .irq_ack = apic_ack_edge,
- .irq_set_affinity = msi_set_affinity,
- .irq_retrigger = apic_retrigger_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_compose_msi_msg = irq_msi_compose_msg,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
-int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
- unsigned int irq_base, unsigned int irq_offset)
-{
- struct irq_chip *chip = &msi_chip;
- struct msi_msg msg;
- unsigned int irq = irq_base + irq_offset;
- int ret;
-
- ret = msi_compose_msg(dev, irq, &msg, -1);
- if (ret < 0)
- return ret;
-
- irq_set_msi_desc_off(irq_base, irq_offset, msidesc);
-
- /*
- * MSI-X message is written per-IRQ, the offset is always 0.
- * MSI message denotes a contiguous group of IRQs, written for 0th IRQ.
- */
- if (!irq_offset)
- pci_write_msi_msg(irq, &msg);
-
- setup_remapped_irq(irq, irq_cfg(irq), chip);
-
- irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
-
- dev_dbg(&dev->dev, "irq %d for MSI/MSI-X\n", irq);
-
- return 0;
-}
-
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
- struct msi_desc *msidesc;
- unsigned int irq;
- int node, ret;
+ struct irq_domain *domain;
+ struct irq_alloc_info info;
- /* Multiple MSI vectors only supported with interrupt remapping */
- if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_MSI;
+ info.msi_dev = dev;
- node = dev_to_node(&dev->dev);
+ domain = irq_remapping_get_irq_domain(&info);
+ if (domain == NULL)
+ domain = msi_default_domain;
+ if (domain == NULL)
+ return -ENOSYS;
- list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = irq_alloc_hwirq(node);
- if (!irq)
- return -ENOSPC;
-
- ret = setup_msi_irq(dev, msidesc, irq, 0);
- if (ret < 0) {
- irq_free_hwirq(irq);
- return ret;
- }
-
- }
- return 0;
+ return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
}
void native_teardown_msi_irq(unsigned int irq)
{
- irq_free_hwirq(irq);
+ irq_domain_free_irqs(irq, 1);
}
-#ifdef CONFIG_DMAR_TABLE
-static int
-dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
+static irq_hw_number_t pci_msi_get_hwirq(struct msi_domain_info *info,
+ msi_alloc_info_t *arg)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- unsigned int dest, irq = data->irq;
- struct msi_msg msg;
- int ret;
-
- ret = apic_set_affinity(data, mask, &dest);
- if (ret)
- return ret;
-
- dmar_msi_read(irq, &msg);
-
- msg.data &= ~MSI_DATA_VECTOR_MASK;
- msg.data |= MSI_DATA_VECTOR(cfg->vector);
- msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
- msg.address_lo |= MSI_ADDR_DEST_ID(dest);
- msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
-
- dmar_msi_write(irq, &msg);
-
- return IRQ_SET_MASK_OK_NOCOPY;
+ return arg->msi_hwirq;
}
-static struct irq_chip dmar_msi_type = {
- .name = "DMAR_MSI",
- .irq_unmask = dmar_msi_unmask,
- .irq_mask = dmar_msi_mask,
- .irq_ack = apic_ack_edge,
- .irq_set_affinity = dmar_msi_set_affinity,
- .irq_retrigger = apic_retrigger_irq,
+static int pci_msi_prepare(struct irq_domain *domain, struct device *dev,
+ int nvec, msi_alloc_info_t *arg)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct msi_desc *desc = first_pci_msi_entry(pdev);
+
+ init_irq_alloc_info(arg, NULL);
+ arg->msi_dev = pdev;
+ if (desc->msi_attrib.is_msix) {
+ arg->type = X86_IRQ_ALLOC_TYPE_MSIX;
+ } else {
+ arg->type = X86_IRQ_ALLOC_TYPE_MSI;
+ arg->flags |= X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+ }
+
+ return 0;
+}
+
+static void pci_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
+{
+ arg->msi_hwirq = pci_msi_domain_calc_hwirq(arg->msi_dev, desc);
+}
+
+static struct msi_domain_ops pci_msi_domain_ops = {
+ .get_hwirq = pci_msi_get_hwirq,
+ .msi_prepare = pci_msi_prepare,
+ .set_desc = pci_msi_set_desc,
+};
+
+static struct msi_domain_info pci_msi_domain_info = {
+ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_PCI_MSIX,
+ .ops = &pci_msi_domain_ops,
+ .chip = &pci_msi_controller,
+ .handler = handle_edge_irq,
+ .handler_name = "edge",
+};
+
+void arch_init_msi_domain(struct irq_domain *parent)
+{
+ if (disable_apic)
+ return;
+
+ msi_default_domain = pci_msi_create_irq_domain(NULL,
+ &pci_msi_domain_info, parent);
+ if (!msi_default_domain)
+ pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n");
+}
+
+#ifdef CONFIG_IRQ_REMAP
+static struct irq_chip pci_msi_ir_controller = {
+ .name = "IR-PCI-MSI",
+ .irq_unmask = pci_msi_unmask_irq,
+ .irq_mask = pci_msi_mask_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_vcpu_affinity = irq_chip_set_vcpu_affinity_parent,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
-int arch_setup_dmar_msi(unsigned int irq)
-{
- int ret;
- struct msi_msg msg;
+static struct msi_domain_info pci_msi_ir_domain_info = {
+ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
+ .ops = &pci_msi_domain_ops,
+ .chip = &pci_msi_ir_controller,
+ .handler = handle_edge_irq,
+ .handler_name = "edge",
+};
- ret = msi_compose_msg(NULL, irq, &msg, -1);
- if (ret < 0)
- return ret;
- dmar_msi_write(irq, &msg);
- irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
- "edge");
+struct irq_domain *arch_create_msi_irq_domain(struct irq_domain *parent)
+{
+ return pci_msi_create_irq_domain(NULL, &pci_msi_ir_domain_info, parent);
+}
+#endif
+
+#ifdef CONFIG_DMAR_TABLE
+static void dmar_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ dmar_msi_write(data->irq, msg);
+}
+
+static struct irq_chip dmar_msi_controller = {
+ .name = "DMAR-MSI",
+ .irq_unmask = dmar_msi_unmask,
+ .irq_mask = dmar_msi_mask,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_set_affinity = msi_domain_set_affinity,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_compose_msi_msg = irq_msi_compose_msg,
+ .irq_write_msi_msg = dmar_msi_write_msg,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+static irq_hw_number_t dmar_msi_get_hwirq(struct msi_domain_info *info,
+ msi_alloc_info_t *arg)
+{
+ return arg->dmar_id;
+}
+
+static int dmar_msi_init(struct irq_domain *domain,
+ struct msi_domain_info *info, unsigned int virq,
+ irq_hw_number_t hwirq, msi_alloc_info_t *arg)
+{
+ irq_domain_set_info(domain, virq, arg->dmar_id, info->chip, NULL,
+ handle_edge_irq, arg->dmar_data, "edge");
+
return 0;
}
+
+static struct msi_domain_ops dmar_msi_domain_ops = {
+ .get_hwirq = dmar_msi_get_hwirq,
+ .msi_init = dmar_msi_init,
+};
+
+static struct msi_domain_info dmar_msi_domain_info = {
+ .ops = &dmar_msi_domain_ops,
+ .chip = &dmar_msi_controller,
+};
+
+static struct irq_domain *dmar_get_irq_domain(void)
+{
+ static struct irq_domain *dmar_domain;
+ static DEFINE_MUTEX(dmar_lock);
+
+ mutex_lock(&dmar_lock);
+ if (dmar_domain == NULL)
+ dmar_domain = msi_create_irq_domain(NULL, &dmar_msi_domain_info,
+ x86_vector_domain);
+ mutex_unlock(&dmar_lock);
+
+ return dmar_domain;
+}
+
+int dmar_alloc_hwirq(int id, int node, void *arg)
+{
+ struct irq_domain *domain = dmar_get_irq_domain();
+ struct irq_alloc_info info;
+
+ if (!domain)
+ return -1;
+
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_DMAR;
+ info.dmar_id = id;
+ info.dmar_data = arg;
+
+ return irq_domain_alloc_irqs(domain, 1, node, &info);
+}
+
+void dmar_free_hwirq(int irq)
+{
+ irq_domain_free_irqs(irq, 1);
+}
#endif
/*
* MSI message composition
*/
#ifdef CONFIG_HPET_TIMER
-
-static int hpet_msi_set_affinity(struct irq_data *data,
- const struct cpumask *mask, bool force)
+static inline int hpet_dev_id(struct irq_domain *domain)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- struct msi_msg msg;
- unsigned int dest;
- int ret;
+ struct msi_domain_info *info = msi_get_domain_info(domain);
- ret = apic_set_affinity(data, mask, &dest);
- if (ret)
- return ret;
-
- hpet_msi_read(data->handler_data, &msg);
-
- msg.data &= ~MSI_DATA_VECTOR_MASK;
- msg.data |= MSI_DATA_VECTOR(cfg->vector);
- msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
- msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
- hpet_msi_write(data->handler_data, &msg);
-
- return IRQ_SET_MASK_OK_NOCOPY;
+ return (int)(long)info->data;
}
-static struct irq_chip hpet_msi_type = {
- .name = "HPET_MSI",
+static void hpet_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ hpet_msi_write(data->handler_data, msg);
+}
+
+static struct irq_chip hpet_msi_controller = {
+ .name = "HPET-MSI",
.irq_unmask = hpet_msi_unmask,
.irq_mask = hpet_msi_mask,
- .irq_ack = apic_ack_edge,
- .irq_set_affinity = hpet_msi_set_affinity,
- .irq_retrigger = apic_retrigger_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_set_affinity = msi_domain_set_affinity,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_compose_msi_msg = irq_msi_compose_msg,
+ .irq_write_msi_msg = hpet_msi_write_msg,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
-int default_setup_hpet_msi(unsigned int irq, unsigned int id)
+static irq_hw_number_t hpet_msi_get_hwirq(struct msi_domain_info *info,
+ msi_alloc_info_t *arg)
{
- struct irq_chip *chip = &hpet_msi_type;
- struct msi_msg msg;
- int ret;
+ return arg->hpet_index;
+}
- ret = msi_compose_msg(NULL, irq, &msg, id);
- if (ret < 0)
- return ret;
+static int hpet_msi_init(struct irq_domain *domain,
+ struct msi_domain_info *info, unsigned int virq,
+ irq_hw_number_t hwirq, msi_alloc_info_t *arg)
+{
+ irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
+ irq_domain_set_info(domain, virq, arg->hpet_index, info->chip, NULL,
+ handle_edge_irq, arg->hpet_data, "edge");
- hpet_msi_write(irq_get_handler_data(irq), &msg);
- irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- setup_remapped_irq(irq, irq_cfg(irq), chip);
-
- irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
return 0;
}
+
+static void hpet_msi_free(struct irq_domain *domain,
+ struct msi_domain_info *info, unsigned int virq)
+{
+ irq_clear_status_flags(virq, IRQ_MOVE_PCNTXT);
+}
+
+static struct msi_domain_ops hpet_msi_domain_ops = {
+ .get_hwirq = hpet_msi_get_hwirq,
+ .msi_init = hpet_msi_init,
+ .msi_free = hpet_msi_free,
+};
+
+static struct msi_domain_info hpet_msi_domain_info = {
+ .ops = &hpet_msi_domain_ops,
+ .chip = &hpet_msi_controller,
+};
+
+struct irq_domain *hpet_create_irq_domain(int hpet_id)
+{
+ struct irq_domain *parent;
+ struct irq_alloc_info info;
+ struct msi_domain_info *domain_info;
+
+ if (x86_vector_domain == NULL)
+ return NULL;
+
+ domain_info = kzalloc(sizeof(*domain_info), GFP_KERNEL);
+ if (!domain_info)
+ return NULL;
+
+ *domain_info = hpet_msi_domain_info;
+ domain_info->data = (void *)(long)hpet_id;
+
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_HPET;
+ info.hpet_id = hpet_id;
+ parent = irq_remapping_get_ir_irq_domain(&info);
+ if (parent == NULL)
+ parent = x86_vector_domain;
+ else
+ hpet_msi_controller.name = "IR-HPET-MSI";
+
+ return msi_create_irq_domain(NULL, domain_info, parent);
+}
+
+int hpet_assign_irq(struct irq_domain *domain, struct hpet_dev *dev,
+ int dev_num)
+{
+ struct irq_alloc_info info;
+
+ init_irq_alloc_info(&info, NULL);
+ info.type = X86_IRQ_ALLOC_TYPE_HPET;
+ info.hpet_data = dev;
+ info.hpet_id = hpet_dev_id(domain);
+ info.hpet_index = dev_num;
+
+ return irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, &info);
+}
#endif
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 6cedd79..28eba2d 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -3,6 +3,8 @@
*
* Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
* Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ * Enable support of hierarchical irqdomains
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,15 +13,28 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/compiler.h>
-#include <linux/irqdomain.h>
#include <linux/slab.h>
+#include <asm/irqdomain.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/i8259.h>
#include <asm/desc.h>
#include <asm/irq_remapping.h>
+struct apic_chip_data {
+ struct irq_cfg cfg;
+ cpumask_var_t domain;
+ cpumask_var_t old_domain;
+ u8 move_in_progress : 1;
+};
+
+struct irq_domain *x86_vector_domain;
static DEFINE_RAW_SPINLOCK(vector_lock);
+static cpumask_var_t vector_cpumask;
+static struct irq_chip lapic_controller;
+#ifdef CONFIG_X86_IO_APIC
+static struct apic_chip_data *legacy_irq_data[NR_IRQS_LEGACY];
+#endif
void lock_vector_lock(void)
{
@@ -34,71 +49,59 @@
raw_spin_unlock(&vector_lock);
}
-struct irq_cfg *irq_cfg(unsigned int irq)
+static struct apic_chip_data *apic_chip_data(struct irq_data *irq_data)
{
- return irq_get_chip_data(irq);
+ if (!irq_data)
+ return NULL;
+
+ while (irq_data->parent_data)
+ irq_data = irq_data->parent_data;
+
+ return irq_data->chip_data;
}
struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
{
- return irq_data->chip_data;
+ struct apic_chip_data *data = apic_chip_data(irq_data);
+
+ return data ? &data->cfg : NULL;
}
-static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node)
+struct irq_cfg *irq_cfg(unsigned int irq)
{
- struct irq_cfg *cfg;
+ return irqd_cfg(irq_get_irq_data(irq));
+}
- cfg = kzalloc_node(sizeof(*cfg), GFP_KERNEL, node);
- if (!cfg)
+static struct apic_chip_data *alloc_apic_chip_data(int node)
+{
+ struct apic_chip_data *data;
+
+ data = kzalloc_node(sizeof(*data), GFP_KERNEL, node);
+ if (!data)
return NULL;
- if (!zalloc_cpumask_var_node(&cfg->domain, GFP_KERNEL, node))
- goto out_cfg;
- if (!zalloc_cpumask_var_node(&cfg->old_domain, GFP_KERNEL, node))
+ if (!zalloc_cpumask_var_node(&data->domain, GFP_KERNEL, node))
+ goto out_data;
+ if (!zalloc_cpumask_var_node(&data->old_domain, GFP_KERNEL, node))
goto out_domain;
-#ifdef CONFIG_X86_IO_APIC
- INIT_LIST_HEAD(&cfg->irq_2_pin);
-#endif
- return cfg;
+ return data;
out_domain:
- free_cpumask_var(cfg->domain);
-out_cfg:
- kfree(cfg);
+ free_cpumask_var(data->domain);
+out_data:
+ kfree(data);
return NULL;
}
-struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node)
+static void free_apic_chip_data(struct apic_chip_data *data)
{
- int res = irq_alloc_desc_at(at, node);
- struct irq_cfg *cfg;
-
- if (res < 0) {
- if (res != -EEXIST)
- return NULL;
- cfg = irq_cfg(at);
- if (cfg)
- return cfg;
+ if (data) {
+ free_cpumask_var(data->domain);
+ free_cpumask_var(data->old_domain);
+ kfree(data);
}
-
- cfg = alloc_irq_cfg(at, node);
- if (cfg)
- irq_set_chip_data(at, cfg);
- else
- irq_free_desc(at);
- return cfg;
}
-static void free_irq_cfg(unsigned int at, struct irq_cfg *cfg)
-{
- if (!cfg)
- return;
- irq_set_chip_data(at, NULL);
- free_cpumask_var(cfg->domain);
- free_cpumask_var(cfg->old_domain);
- kfree(cfg);
-}
-
-static int
-__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+static int __assign_irq_vector(int irq, struct apic_chip_data *d,
+ const struct cpumask *mask)
{
/*
* NOTE! The local APIC isn't very good at handling
@@ -114,36 +117,33 @@
static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START;
static int current_offset = VECTOR_OFFSET_START % 16;
int cpu, err;
- cpumask_var_t tmp_mask;
- if (cfg->move_in_progress)
+ if (d->move_in_progress)
return -EBUSY;
- if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
- return -ENOMEM;
-
/* Only try and allocate irqs on cpus that are present */
err = -ENOSPC;
- cpumask_clear(cfg->old_domain);
+ cpumask_clear(d->old_domain);
cpu = cpumask_first_and(mask, cpu_online_mask);
while (cpu < nr_cpu_ids) {
int new_cpu, vector, offset;
- apic->vector_allocation_domain(cpu, tmp_mask, mask);
+ apic->vector_allocation_domain(cpu, vector_cpumask, mask);
- if (cpumask_subset(tmp_mask, cfg->domain)) {
+ if (cpumask_subset(vector_cpumask, d->domain)) {
err = 0;
- if (cpumask_equal(tmp_mask, cfg->domain))
+ if (cpumask_equal(vector_cpumask, d->domain))
break;
/*
* New cpumask using the vector is a proper subset of
* the current in use mask. So cleanup the vector
* allocation for the members that are not used anymore.
*/
- cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask);
- cfg->move_in_progress =
- cpumask_intersects(cfg->old_domain, cpu_online_mask);
- cpumask_and(cfg->domain, cfg->domain, tmp_mask);
+ cpumask_andnot(d->old_domain, d->domain,
+ vector_cpumask);
+ d->move_in_progress =
+ cpumask_intersects(d->old_domain, cpu_online_mask);
+ cpumask_and(d->domain, d->domain, vector_cpumask);
break;
}
@@ -157,16 +157,18 @@
}
if (unlikely(current_vector == vector)) {
- cpumask_or(cfg->old_domain, cfg->old_domain, tmp_mask);
- cpumask_andnot(tmp_mask, mask, cfg->old_domain);
- cpu = cpumask_first_and(tmp_mask, cpu_online_mask);
+ cpumask_or(d->old_domain, d->old_domain,
+ vector_cpumask);
+ cpumask_andnot(vector_cpumask, mask, d->old_domain);
+ cpu = cpumask_first_and(vector_cpumask,
+ cpu_online_mask);
continue;
}
if (test_bit(vector, used_vectors))
goto next;
- for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) {
+ for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask) {
if (per_cpu(vector_irq, new_cpu)[vector] >
VECTOR_UNDEFINED)
goto next;
@@ -174,55 +176,73 @@
/* Found one! */
current_vector = vector;
current_offset = offset;
- if (cfg->vector) {
- cpumask_copy(cfg->old_domain, cfg->domain);
- cfg->move_in_progress =
- cpumask_intersects(cfg->old_domain, cpu_online_mask);
+ if (d->cfg.vector) {
+ cpumask_copy(d->old_domain, d->domain);
+ d->move_in_progress =
+ cpumask_intersects(d->old_domain, cpu_online_mask);
}
- for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
+ for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask)
per_cpu(vector_irq, new_cpu)[vector] = irq;
- cfg->vector = vector;
- cpumask_copy(cfg->domain, tmp_mask);
+ d->cfg.vector = vector;
+ cpumask_copy(d->domain, vector_cpumask);
err = 0;
break;
}
- free_cpumask_var(tmp_mask);
+
+ if (!err) {
+ /* cache destination APIC IDs into cfg->dest_apicid */
+ err = apic->cpu_mask_to_apicid_and(mask, d->domain,
+ &d->cfg.dest_apicid);
+ }
return err;
}
-int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+static int assign_irq_vector(int irq, struct apic_chip_data *data,
+ const struct cpumask *mask)
{
int err;
unsigned long flags;
raw_spin_lock_irqsave(&vector_lock, flags);
- err = __assign_irq_vector(irq, cfg, mask);
+ err = __assign_irq_vector(irq, data, mask);
raw_spin_unlock_irqrestore(&vector_lock, flags);
return err;
}
-void clear_irq_vector(int irq, struct irq_cfg *cfg)
+static int assign_irq_vector_policy(int irq, int node,
+ struct apic_chip_data *data,
+ struct irq_alloc_info *info)
+{
+ if (info && info->mask)
+ return assign_irq_vector(irq, data, info->mask);
+ if (node != NUMA_NO_NODE &&
+ assign_irq_vector(irq, data, cpumask_of_node(node)) == 0)
+ return 0;
+ return assign_irq_vector(irq, data, apic->target_cpus());
+}
+
+static void clear_irq_vector(int irq, struct apic_chip_data *data)
{
int cpu, vector;
unsigned long flags;
raw_spin_lock_irqsave(&vector_lock, flags);
- BUG_ON(!cfg->vector);
+ BUG_ON(!data->cfg.vector);
- vector = cfg->vector;
- for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+ vector = data->cfg.vector;
+ for_each_cpu_and(cpu, data->domain, cpu_online_mask)
per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
- cfg->vector = 0;
- cpumask_clear(cfg->domain);
+ data->cfg.vector = 0;
+ cpumask_clear(data->domain);
- if (likely(!cfg->move_in_progress)) {
+ if (likely(!data->move_in_progress)) {
raw_spin_unlock_irqrestore(&vector_lock, flags);
return;
}
- for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+ for_each_cpu_and(cpu, data->old_domain, cpu_online_mask) {
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
vector++) {
if (per_cpu(vector_irq, cpu)[vector] != irq)
@@ -231,10 +251,95 @@
break;
}
}
- cfg->move_in_progress = 0;
+ data->move_in_progress = 0;
raw_spin_unlock_irqrestore(&vector_lock, flags);
}
+void init_irq_alloc_info(struct irq_alloc_info *info,
+ const struct cpumask *mask)
+{
+ memset(info, 0, sizeof(*info));
+ info->mask = mask;
+}
+
+void copy_irq_alloc_info(struct irq_alloc_info *dst, struct irq_alloc_info *src)
+{
+ if (src)
+ *dst = *src;
+ else
+ memset(dst, 0, sizeof(*dst));
+}
+
+static void x86_vector_free_irqs(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
+{
+ struct irq_data *irq_data;
+ int i;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(x86_vector_domain, virq + i);
+ if (irq_data && irq_data->chip_data) {
+ clear_irq_vector(virq + i, irq_data->chip_data);
+ free_apic_chip_data(irq_data->chip_data);
+#ifdef CONFIG_X86_IO_APIC
+ if (virq + i < nr_legacy_irqs())
+ legacy_irq_data[virq + i] = NULL;
+#endif
+ irq_domain_reset_irq_data(irq_data);
+ }
+ }
+}
+
+static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct irq_alloc_info *info = arg;
+ struct apic_chip_data *data;
+ struct irq_data *irq_data;
+ int i, err;
+
+ if (disable_apic)
+ return -ENXIO;
+
+ /* Currently vector allocator can't guarantee contiguous allocations */
+ if ((info->flags & X86_IRQ_ALLOC_CONTIGUOUS_VECTORS) && nr_irqs > 1)
+ return -ENOSYS;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ BUG_ON(!irq_data);
+#ifdef CONFIG_X86_IO_APIC
+ if (virq + i < nr_legacy_irqs() && legacy_irq_data[virq + i])
+ data = legacy_irq_data[virq + i];
+ else
+#endif
+ data = alloc_apic_chip_data(irq_data->node);
+ if (!data) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ irq_data->chip = &lapic_controller;
+ irq_data->chip_data = data;
+ irq_data->hwirq = virq + i;
+ err = assign_irq_vector_policy(virq, irq_data->node, data,
+ info);
+ if (err)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ x86_vector_free_irqs(domain, virq, i + 1);
+ return err;
+}
+
+static const struct irq_domain_ops x86_vector_domain_ops = {
+ .alloc = x86_vector_alloc_irqs,
+ .free = x86_vector_free_irqs,
+};
+
int __init arch_probe_nr_irqs(void)
{
int nr;
@@ -258,8 +363,43 @@
return nr_legacy_irqs();
}
+#ifdef CONFIG_X86_IO_APIC
+static void init_legacy_irqs(void)
+{
+ int i, node = cpu_to_node(0);
+ struct apic_chip_data *data;
+
+ /*
+ * For legacy IRQ's, start with assigning irq0 to irq15 to
+ * ISA_IRQ_VECTOR(i) for all cpu's.
+ */
+ for (i = 0; i < nr_legacy_irqs(); i++) {
+ data = legacy_irq_data[i] = alloc_apic_chip_data(node);
+ BUG_ON(!data);
+
+ data->cfg.vector = ISA_IRQ_VECTOR(i);
+ cpumask_setall(data->domain);
+ irq_set_chip_data(i, data);
+ }
+}
+#else
+static void init_legacy_irqs(void) { }
+#endif
+
int __init arch_early_irq_init(void)
{
+ init_legacy_irqs();
+
+ x86_vector_domain = irq_domain_add_tree(NULL, &x86_vector_domain_ops,
+ NULL);
+ BUG_ON(x86_vector_domain == NULL);
+ irq_set_default_host(x86_vector_domain);
+
+ arch_init_msi_domain(x86_vector_domain);
+ arch_init_htirq_domain(x86_vector_domain);
+
+ BUG_ON(!alloc_cpumask_var(&vector_cpumask, GFP_KERNEL));
+
return arch_early_ioapic_init();
}
@@ -267,7 +407,7 @@
{
/* Initialize vector_irq on a new cpu */
int irq, vector;
- struct irq_cfg *cfg;
+ struct apic_chip_data *data;
/*
* vector_lock will make sure that we don't run into irq vector
@@ -277,13 +417,13 @@
raw_spin_lock(&vector_lock);
/* Mark the inuse vectors */
for_each_active_irq(irq) {
- cfg = irq_cfg(irq);
- if (!cfg)
+ data = apic_chip_data(irq_get_irq_data(irq));
+ if (!data)
continue;
- if (!cpumask_test_cpu(cpu, cfg->domain))
+ if (!cpumask_test_cpu(cpu, data->domain))
continue;
- vector = cfg->vector;
+ vector = data->cfg.vector;
per_cpu(vector_irq, cpu)[vector] = irq;
}
/* Mark the free vectors */
@@ -292,8 +432,8 @@
if (irq <= VECTOR_UNDEFINED)
continue;
- cfg = irq_cfg(irq);
- if (!cpumask_test_cpu(cpu, cfg->domain))
+ data = apic_chip_data(irq_get_irq_data(irq));
+ if (!cpumask_test_cpu(cpu, data->domain))
per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
}
raw_spin_unlock(&vector_lock);
@@ -314,20 +454,20 @@
* legacy vector to irq mapping:
*/
for (irq = 0; irq < nr_legacy_irqs(); irq++)
- per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
+ per_cpu(vector_irq, cpu)[ISA_IRQ_VECTOR(irq)] = irq;
__setup_vector_irq(cpu);
}
-int apic_retrigger_irq(struct irq_data *data)
+static int apic_retrigger_irq(struct irq_data *irq_data)
{
- struct irq_cfg *cfg = irqd_cfg(data);
+ struct apic_chip_data *data = apic_chip_data(irq_data);
unsigned long flags;
int cpu;
raw_spin_lock_irqsave(&vector_lock, flags);
- cpu = cpumask_first_and(cfg->domain, cpu_online_mask);
- apic->send_IPI_mask(cpumask_of(cpu), cfg->vector);
+ cpu = cpumask_first_and(data->domain, cpu_online_mask);
+ apic->send_IPI_mask(cpumask_of(cpu), data->cfg.vector);
raw_spin_unlock_irqrestore(&vector_lock, flags);
return 1;
@@ -340,73 +480,76 @@
ack_APIC_irq();
}
-/*
- * Either sets data->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
- * leaves data->affinity untouched.
- */
-int apic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- unsigned int *dest_id)
+static int apic_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *dest, bool force)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- unsigned int irq = data->irq;
- int err;
+ struct apic_chip_data *data = irq_data->chip_data;
+ int err, irq = irq_data->irq;
if (!config_enabled(CONFIG_SMP))
return -EPERM;
- if (!cpumask_intersects(mask, cpu_online_mask))
+ if (!cpumask_intersects(dest, cpu_online_mask))
return -EINVAL;
- err = assign_irq_vector(irq, cfg, mask);
- if (err)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(mask, cfg->domain, dest_id);
+ err = assign_irq_vector(irq, data, dest);
if (err) {
- if (assign_irq_vector(irq, cfg, data->affinity))
+ struct irq_data *top = irq_get_irq_data(irq);
+
+ if (assign_irq_vector(irq, data, top->affinity))
pr_err("Failed to recover vector for irq %d\n", irq);
return err;
}
- cpumask_copy(data->affinity, mask);
-
- return 0;
+ return IRQ_SET_MASK_OK;
}
+static struct irq_chip lapic_controller = {
+ .irq_ack = apic_ack_edge,
+ .irq_set_affinity = apic_set_affinity,
+ .irq_retrigger = apic_retrigger_irq,
+};
+
#ifdef CONFIG_SMP
-void send_cleanup_vector(struct irq_cfg *cfg)
+static void __send_cleanup_vector(struct apic_chip_data *data)
{
cpumask_var_t cleanup_mask;
if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
unsigned int i;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ for_each_cpu_and(i, data->old_domain, cpu_online_mask)
apic->send_IPI_mask(cpumask_of(i),
IRQ_MOVE_CLEANUP_VECTOR);
} else {
- cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+ cpumask_and(cleanup_mask, data->old_domain, cpu_online_mask);
apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
free_cpumask_var(cleanup_mask);
}
- cfg->move_in_progress = 0;
+ data->move_in_progress = 0;
+}
+
+void send_cleanup_vector(struct irq_cfg *cfg)
+{
+ struct apic_chip_data *data;
+
+ data = container_of(cfg, struct apic_chip_data, cfg);
+ if (data->move_in_progress)
+ __send_cleanup_vector(data);
}
asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
- ack_APIC_irq();
- irq_enter();
- exit_idle();
+ entering_ack_irq();
me = smp_processor_id();
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
int irq;
unsigned int irr;
struct irq_desc *desc;
- struct irq_cfg *cfg;
+ struct apic_chip_data *data;
irq = __this_cpu_read(vector_irq[vector]);
@@ -417,8 +560,8 @@
if (!desc)
continue;
- cfg = irq_cfg(irq);
- if (!cfg)
+ data = apic_chip_data(&desc->irq_data);
+ if (!data)
continue;
raw_spin_lock(&desc->lock);
@@ -427,10 +570,11 @@
* Check if the irq migration is in progress. If so, we
* haven't received the cleanup request yet for this irq.
*/
- if (cfg->move_in_progress)
+ if (data->move_in_progress)
goto unlock;
- if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
+ if (vector == data->cfg.vector &&
+ cpumask_test_cpu(me, data->domain))
goto unlock;
irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
@@ -450,20 +594,21 @@
raw_spin_unlock(&desc->lock);
}
- irq_exit();
+ exiting_irq();
}
static void __irq_complete_move(struct irq_cfg *cfg, unsigned vector)
{
unsigned me;
+ struct apic_chip_data *data;
- if (likely(!cfg->move_in_progress))
+ data = container_of(cfg, struct apic_chip_data, cfg);
+ if (likely(!data->move_in_progress))
return;
me = smp_processor_id();
-
- if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
- send_cleanup_vector(cfg);
+ if (vector == data->cfg.vector && cpumask_test_cpu(me, data->domain))
+ __send_cleanup_vector(data);
}
void irq_complete_move(struct irq_cfg *cfg)
@@ -475,46 +620,11 @@
{
struct irq_cfg *cfg = irq_cfg(irq);
- if (!cfg)
- return;
-
- __irq_complete_move(cfg, cfg->vector);
+ if (cfg)
+ __irq_complete_move(cfg, cfg->vector);
}
#endif
-/*
- * Dynamic irq allocate and deallocation. Should be replaced by irq domains!
- */
-int arch_setup_hwirq(unsigned int irq, int node)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- int ret;
-
- cfg = alloc_irq_cfg(irq, node);
- if (!cfg)
- return -ENOMEM;
-
- raw_spin_lock_irqsave(&vector_lock, flags);
- ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
- raw_spin_unlock_irqrestore(&vector_lock, flags);
-
- if (!ret)
- irq_set_chip_data(irq, cfg);
- else
- free_irq_cfg(irq, cfg);
- return ret;
-}
-
-void arch_teardown_hwirq(unsigned int irq)
-{
- struct irq_cfg *cfg = irq_cfg(irq);
-
- free_remapped_irq(irq);
- clear_irq_vector(irq, cfg);
- free_irq_cfg(irq, cfg);
-}
-
static void __init print_APIC_field(int base)
{
int i;
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 6fae733..3ffd925 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -21,11 +21,13 @@
static bool x2apic_fadt_phys(void)
{
+#ifdef CONFIG_ACPI
if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "System requires x2apic physical mode\n");
return true;
}
+#endif
return false;
}
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index b27f6ec..8e3d22a1 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -68,7 +68,9 @@
OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
+#ifdef CONFIG_X86_32
OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
+#endif
OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
#endif
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index dcaab87..d8f42f9 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -66,7 +66,7 @@
DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
DEFINE(NR_syscalls, sizeof(syscalls_64));
- DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1);
+ DEFINE(__NR_syscall_compat_max, sizeof(syscalls_ia32) - 1);
DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32));
return 0;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 56cae19..dd3a4ba 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -295,7 +295,7 @@
* Assumption: Number of cores in each internal node is the same.
* (2) AMD processors supporting compute units
*/
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
static void amd_get_topology(struct cpuinfo_x86 *c)
{
u32 cores_per_cu = 1;
@@ -348,7 +348,7 @@
*/
static void amd_detect_cmp(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
unsigned bits;
int cpu = smp_processor_id();
@@ -433,7 +433,7 @@
static void early_init_amd_mc(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
unsigned bits, ecx;
/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b28e526..9fc5e3d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -491,7 +491,7 @@
void detect_ht(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
static bool printed;
@@ -827,7 +827,7 @@
if (c->cpuid_level >= 0x00000001) {
c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_HT
+# ifdef CONFIG_SMP
c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
# else
c->apicid = c->initial_apicid;
@@ -1009,7 +1009,7 @@
(unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
0);
- wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0);
+ wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
out:
put_cpu();
@@ -1138,10 +1138,6 @@
}
__setup("clearcpuid=", setup_disablecpuid);
-DEFINE_PER_CPU(unsigned long, kernel_stack) =
- (unsigned long)&init_thread_union + THREAD_SIZE;
-EXPORT_PER_CPU_SYMBOL(kernel_stack);
-
#ifdef CONFIG_X86_64
struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
struct desc_ptr debug_idt_descr = { NR_VECTORS * 16 - 1,
@@ -1189,10 +1185,10 @@
* set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
*/
wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
- wrmsrl(MSR_LSTAR, system_call);
+ wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
#ifdef CONFIG_IA32_EMULATION
- wrmsrl(MSR_CSTAR, ia32_cstar_target);
+ wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
/*
* This only works on Intel CPUs.
* On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
@@ -1201,7 +1197,7 @@
*/
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
- wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
#else
wrmsrl(MSR_CSTAR, ignore_sysret);
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index edcb0e2..be4febc 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -654,7 +654,7 @@
unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
unsigned int cpu = c->cpu_index;
#endif
@@ -773,19 +773,19 @@
if (new_l2) {
l2 = new_l2;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
per_cpu(cpu_llc_id, cpu) = l2_id;
#endif
}
if (new_l3) {
l3 = new_l3;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
per_cpu(cpu_llc_id, cpu) = l3_id;
#endif
}
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
/*
* If cpu_llc_id is not yet set, this means cpuid_level < 4 which in
* turns means that the only possibility is SMT (as indicated in
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 95cf78d..df919ff 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1053,6 +1053,7 @@
char *msg = "Unknown";
u64 recover_paddr = ~0ull;
int flags = MF_ACTION_REQUIRED;
+ int lmce = 0;
prev_state = ist_enter(regs);
@@ -1080,11 +1081,20 @@
kill_it = 1;
/*
- * Go through all the banks in exclusion of the other CPUs.
- * This way we don't report duplicated events on shared banks
- * because the first one to see it will clear it.
+ * Check if this MCE is signaled to only this logical processor
*/
- order = mce_start(&no_way_out);
+ if (m.mcgstatus & MCG_STATUS_LMCES)
+ lmce = 1;
+ else {
+ /*
+ * Go through all the banks in exclusion of the other CPUs.
+ * This way we don't report duplicated events on shared banks
+ * because the first one to see it will clear it.
+ * If this is a Local MCE, then no need to perform rendezvous.
+ */
+ order = mce_start(&no_way_out);
+ }
+
for (i = 0; i < cfg->banks; i++) {
__clear_bit(i, toclear);
if (!test_bit(i, valid_banks))
@@ -1161,8 +1171,18 @@
* Do most of the synchronization with other CPUs.
* When there's any problem use only local no_way_out state.
*/
- if (mce_end(order) < 0)
- no_way_out = worst >= MCE_PANIC_SEVERITY;
+ if (!lmce) {
+ if (mce_end(order) < 0)
+ no_way_out = worst >= MCE_PANIC_SEVERITY;
+ } else {
+ /*
+ * Local MCE skipped calling mce_reign()
+ * If we found a fatal error, we need to panic here.
+ */
+ if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3)
+ mce_panic("Machine check from unknown source",
+ NULL, NULL);
+ }
/*
* At insane "tolerant" levels we take no action. Otherwise
@@ -1643,10 +1663,16 @@
mce_intel_feature_init(c);
mce_adjust_timer = cmci_intel_adjust_timer;
break;
- case X86_VENDOR_AMD:
+
+ case X86_VENDOR_AMD: {
+ u32 ebx = cpuid_ebx(0x80000007);
+
mce_amd_feature_init(c);
- mce_flags.overflow_recov = cpuid_ebx(0x80000007) & 0x1;
+ mce_flags.overflow_recov = !!(ebx & BIT(0));
+ mce_flags.succor = !!(ebx & BIT(1));
break;
+ }
+
default:
break;
}
@@ -1982,6 +2008,7 @@
/*
* mce=off Disables machine check
* mce=no_cmci Disables CMCI
+ * mce=no_lmce Disables LMCE
* mce=dont_log_ce Clears corrected events silently, no log created for CEs.
* mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
* mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
@@ -2005,6 +2032,8 @@
cfg->disabled = true;
else if (!strcmp(str, "no_cmci"))
cfg->cmci_disabled = true;
+ else if (!strcmp(str, "no_lmce"))
+ cfg->lmce_disabled = true;
else if (!strcmp(str, "dont_log_ce"))
cfg->dont_log_ce = true;
else if (!strcmp(str, "ignore_ce"))
@@ -2014,11 +2043,8 @@
else if (!strcmp(str, "bios_cmci_threshold"))
cfg->bios_cmci_threshold = true;
else if (isdigit(str[0])) {
- get_option(&str, &(cfg->tolerant));
- if (*str == ',') {
- ++str;
+ if (get_option(&str, &cfg->tolerant) == 2)
get_option(&str, &(cfg->monarch_timeout));
- }
} else {
pr_info("mce argument %s ignored. Please use /sys\n", str);
return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 55ad9b3..e99b150 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -1,19 +1,13 @@
/*
- * (c) 2005-2012 Advanced Micro Devices, Inc.
+ * (c) 2005-2015 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
* Written by Jacob Shin - AMD, Inc.
- *
* Maintained by: Borislav Petkov <bp@alien8.de>
*
- * April 2006
- * - added support for AMD Family 0x10 processors
- * May 2012
- * - major scrubbing
- *
- * All MC4_MISCi registers are shared between multi-cores
+ * All MC4_MISCi registers are shared between cores on a node.
*/
#include <linux/interrupt.h>
#include <linux/notifier.h>
@@ -32,6 +26,7 @@
#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/msr.h>
+#include <asm/trace/irq_vectors.h>
#define NR_BLOCKS 9
#define THRESHOLD_MAX 0xFFF
@@ -47,6 +42,13 @@
#define MASK_BLKPTR_LO 0xFF000000
#define MCG_XBLK_ADDR 0xC0000400
+/* Deferred error settings */
+#define MSR_CU_DEF_ERR 0xC0000410
+#define MASK_DEF_LVTOFF 0x000000F0
+#define MASK_DEF_INT_TYPE 0x00000006
+#define DEF_LVT_OFF 0x2
+#define DEF_INT_TYPE_APIC 0x2
+
static const char * const th_names[] = {
"load_store",
"insn_fetch",
@@ -60,6 +62,13 @@
static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */
static void amd_threshold_interrupt(void);
+static void amd_deferred_error_interrupt(void);
+
+static void default_deferred_error_interrupt(void)
+{
+ pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR);
+}
+void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
/*
* CPU Initialization
@@ -196,7 +205,7 @@
threshold_restart_bank(&tr);
};
-static int setup_APIC_mce(int reserved, int new)
+static int setup_APIC_mce_threshold(int reserved, int new)
{
if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR,
APIC_EILVT_MSG_FIX, 0))
@@ -205,6 +214,39 @@
return reserved;
}
+static int setup_APIC_deferred_error(int reserved, int new)
+{
+ if (reserved < 0 && !setup_APIC_eilvt(new, DEFERRED_ERROR_VECTOR,
+ APIC_EILVT_MSG_FIX, 0))
+ return new;
+
+ return reserved;
+}
+
+static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
+{
+ u32 low = 0, high = 0;
+ int def_offset = -1, def_new;
+
+ if (rdmsr_safe(MSR_CU_DEF_ERR, &low, &high))
+ return;
+
+ def_new = (low & MASK_DEF_LVTOFF) >> 4;
+ if (!(low & MASK_DEF_LVTOFF)) {
+ pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n");
+ def_new = DEF_LVT_OFF;
+ low = (low & ~MASK_DEF_LVTOFF) | (DEF_LVT_OFF << 4);
+ }
+
+ def_offset = setup_APIC_deferred_error(def_offset, def_new);
+ if ((def_offset == def_new) &&
+ (deferred_error_int_vector != amd_deferred_error_interrupt))
+ deferred_error_int_vector = amd_deferred_error_interrupt;
+
+ low = (low & ~MASK_DEF_INT_TYPE) | DEF_INT_TYPE_APIC;
+ wrmsr(MSR_CU_DEF_ERR, low, high);
+}
+
/* cpu init entry point, called from mce.c with preempt off */
void mce_amd_feature_init(struct cpuinfo_x86 *c)
{
@@ -252,7 +294,7 @@
b.interrupt_enable = 1;
new = (high & MASK_LVTOFF_HI) >> 20;
- offset = setup_APIC_mce(offset, new);
+ offset = setup_APIC_mce_threshold(offset, new);
if ((offset == new) &&
(mce_threshold_vector != amd_threshold_interrupt))
@@ -262,6 +304,73 @@
mce_threshold_block_init(&b, offset);
}
}
+
+ if (mce_flags.succor)
+ deferred_error_interrupt_enable(c);
+}
+
+static void __log_error(unsigned int bank, bool threshold_err, u64 misc)
+{
+ struct mce m;
+ u64 status;
+
+ rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+ if (!(status & MCI_STATUS_VAL))
+ return;
+
+ mce_setup(&m);
+
+ m.status = status;
+ m.bank = bank;
+
+ if (threshold_err)
+ m.misc = misc;
+
+ if (m.status & MCI_STATUS_ADDRV)
+ rdmsrl(MSR_IA32_MCx_ADDR(bank), m.addr);
+
+ mce_log(&m);
+ wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+}
+
+static inline void __smp_deferred_error_interrupt(void)
+{
+ inc_irq_stat(irq_deferred_error_count);
+ deferred_error_int_vector();
+}
+
+asmlinkage __visible void smp_deferred_error_interrupt(void)
+{
+ entering_irq();
+ __smp_deferred_error_interrupt();
+ exiting_ack_irq();
+}
+
+asmlinkage __visible void smp_trace_deferred_error_interrupt(void)
+{
+ entering_irq();
+ trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR);
+ __smp_deferred_error_interrupt();
+ trace_deferred_error_apic_exit(DEFERRED_ERROR_VECTOR);
+ exiting_ack_irq();
+}
+
+/* APIC interrupt handler for deferred errors */
+static void amd_deferred_error_interrupt(void)
+{
+ u64 status;
+ unsigned int bank;
+
+ for (bank = 0; bank < mca_cfg.banks; ++bank) {
+ rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+
+ if (!(status & MCI_STATUS_VAL) ||
+ !(status & MCI_STATUS_DEFERRED))
+ continue;
+
+ __log_error(bank, false, 0);
+ break;
+ }
}
/*
@@ -273,12 +382,12 @@
* the interrupt goes off when error_count reaches threshold_limit.
* the handler will simply log mcelog w/ software defined bank number.
*/
+
static void amd_threshold_interrupt(void)
{
u32 low = 0, high = 0, address = 0;
int cpu = smp_processor_id();
unsigned int bank, block;
- struct mce m;
/* assume first bank caused it */
for (bank = 0; bank < mca_cfg.banks; ++bank) {
@@ -321,15 +430,7 @@
return;
log:
- mce_setup(&m);
- rdmsrl(MSR_IA32_MCx_STATUS(bank), m.status);
- if (!(m.status & MCI_STATUS_VAL))
- return;
- m.misc = ((u64)high << 32) | low;
- m.bank = bank;
- mce_log(&m);
-
- wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+ __log_error(bank, true, ((u64)high << 32) | low);
}
/*
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index b4a41cf..844f56c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -91,6 +91,36 @@
return !!(cap & MCG_CMCI_P);
}
+static bool lmce_supported(void)
+{
+ u64 tmp;
+
+ if (mca_cfg.lmce_disabled)
+ return false;
+
+ rdmsrl(MSR_IA32_MCG_CAP, tmp);
+
+ /*
+ * LMCE depends on recovery support in the processor. Hence both
+ * MCG_SER_P and MCG_LMCE_P should be present in MCG_CAP.
+ */
+ if ((tmp & (MCG_SER_P | MCG_LMCE_P)) !=
+ (MCG_SER_P | MCG_LMCE_P))
+ return false;
+
+ /*
+ * BIOS should indicate support for LMCE by setting bit 20 in
+ * IA32_FEATURE_CONTROL without which touching MCG_EXT_CTL will
+ * generate a #GP fault.
+ */
+ rdmsrl(MSR_IA32_FEATURE_CONTROL, tmp);
+ if ((tmp & (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE)) ==
+ (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE))
+ return true;
+
+ return false;
+}
+
bool mce_intel_cmci_poll(void)
{
if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
@@ -405,8 +435,22 @@
cmci_recheck();
}
+void intel_init_lmce(void)
+{
+ u64 val;
+
+ if (!lmce_supported())
+ return;
+
+ rdmsrl(MSR_IA32_MCG_EXT_CTL, val);
+
+ if (!(val & MCG_EXT_CTL_LMCE_EN))
+ wrmsrl(MSR_IA32_MCG_EXT_CTL, val | MCG_EXT_CTL_LMCE_EN);
+}
+
void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
intel_init_thermal(c);
intel_init_cmci();
+ intel_init_lmce();
}
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 939155f..aad4bd8 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -39,14 +39,12 @@
{
struct pt_regs *old_regs = set_irq_regs(regs);
- irq_enter();
- exit_idle();
-
+ entering_irq();
inc_irq_stat(irq_hv_callback_count);
if (vmbus_handler)
vmbus_handler();
- irq_exit();
+ exiting_irq();
set_irq_regs(old_regs);
}
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 5f90b85..70d7c93 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -98,7 +98,8 @@
continue;
base = range_state[i].base_pfn;
if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed &&
- (mtrr_state.enabled & 1)) {
+ (mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) &&
+ (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
/* Var MTRR contains UC entry below 1M? Skip it: */
printk(BIOS_BUG_MSG, i);
if (base + size <= (1<<(20-PAGE_SHIFT)))
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 7d74f7b..3b533cf 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -102,59 +102,76 @@
return 0;
}
-/*
- * Error/Semi-error returns:
- * 0xFF - when MTRR is not enabled
- * *repeat == 1 implies [start:end] spanned across MTRR range and type returned
- * corresponds only to [start:*partial_end].
- * Caller has to lookup again for [*partial_end:end].
+/**
+ * mtrr_type_lookup_fixed - look up memory type in MTRR fixed entries
+ *
+ * Return the MTRR fixed memory type of 'start'.
+ *
+ * MTRR fixed entries are divided into the following ways:
+ * 0x00000 - 0x7FFFF : This range is divided into eight 64KB sub-ranges
+ * 0x80000 - 0xBFFFF : This range is divided into sixteen 16KB sub-ranges
+ * 0xC0000 - 0xFFFFF : This range is divided into sixty-four 4KB sub-ranges
+ *
+ * Return Values:
+ * MTRR_TYPE_(type) - Matched memory type
+ * MTRR_TYPE_INVALID - Unmatched
*/
-static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
+static u8 mtrr_type_lookup_fixed(u64 start, u64 end)
+{
+ int idx;
+
+ if (start >= 0x100000)
+ return MTRR_TYPE_INVALID;
+
+ /* 0x0 - 0x7FFFF */
+ if (start < 0x80000) {
+ idx = 0;
+ idx += (start >> 16);
+ return mtrr_state.fixed_ranges[idx];
+ /* 0x80000 - 0xBFFFF */
+ } else if (start < 0xC0000) {
+ idx = 1 * 8;
+ idx += ((start - 0x80000) >> 14);
+ return mtrr_state.fixed_ranges[idx];
+ }
+
+ /* 0xC0000 - 0xFFFFF */
+ idx = 3 * 8;
+ idx += ((start - 0xC0000) >> 12);
+ return mtrr_state.fixed_ranges[idx];
+}
+
+/**
+ * mtrr_type_lookup_variable - look up memory type in MTRR variable entries
+ *
+ * Return Value:
+ * MTRR_TYPE_(type) - Matched memory type or default memory type (unmatched)
+ *
+ * Output Arguments:
+ * repeat - Set to 1 when [start:end] spanned across MTRR range and type
+ * returned corresponds only to [start:*partial_end]. Caller has
+ * to lookup again for [*partial_end:end].
+ *
+ * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the
+ * region is fully covered by a single MTRR entry or the default
+ * type.
+ */
+static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
+ int *repeat, u8 *uniform)
{
int i;
u64 base, mask;
u8 prev_match, curr_match;
*repeat = 0;
- if (!mtrr_state_set)
- return 0xFF;
+ *uniform = 1;
- if (!mtrr_state.enabled)
- return 0xFF;
-
- /* Make end inclusive end, instead of exclusive */
+ /* Make end inclusive instead of exclusive */
end--;
- /* Look in fixed ranges. Just return the type as per start */
- if (mtrr_state.have_fixed && (start < 0x100000)) {
- int idx;
-
- if (start < 0x80000) {
- idx = 0;
- idx += (start >> 16);
- return mtrr_state.fixed_ranges[idx];
- } else if (start < 0xC0000) {
- idx = 1 * 8;
- idx += ((start - 0x80000) >> 14);
- return mtrr_state.fixed_ranges[idx];
- } else if (start < 0x1000000) {
- idx = 3 * 8;
- idx += ((start - 0xC0000) >> 12);
- return mtrr_state.fixed_ranges[idx];
- }
- }
-
- /*
- * Look in variable ranges
- * Look of multiple ranges matching this address and pick type
- * as per MTRR precedence
- */
- if (!(mtrr_state.enabled & 2))
- return mtrr_state.def_type;
-
- prev_match = 0xFF;
+ prev_match = MTRR_TYPE_INVALID;
for (i = 0; i < num_var_ranges; ++i) {
- unsigned short start_state, end_state;
+ unsigned short start_state, end_state, inclusive;
if (!(mtrr_state.var_ranges[i].mask_lo & (1 << 11)))
continue;
@@ -166,20 +183,29 @@
start_state = ((start & mask) == (base & mask));
end_state = ((end & mask) == (base & mask));
+ inclusive = ((start < base) && (end > base));
- if (start_state != end_state) {
+ if ((start_state != end_state) || inclusive) {
/*
* We have start:end spanning across an MTRR.
- * We split the region into
- * either
- * (start:mtrr_end) (mtrr_end:end)
- * or
- * (start:mtrr_start) (mtrr_start:end)
+ * We split the region into either
+ *
+ * - start_state:1
+ * (start:mtrr_end)(mtrr_end:end)
+ * - end_state:1
+ * (start:mtrr_start)(mtrr_start:end)
+ * - inclusive:1
+ * (start:mtrr_start)(mtrr_start:mtrr_end)(mtrr_end:end)
+ *
* depending on kind of overlap.
- * Return the type for first region and a pointer to
- * the start of second region so that caller will
- * lookup again on the second region.
- * Note: This way we handle multiple overlaps as well.
+ *
+ * Return the type of the first region and a pointer
+ * to the start of next region so that caller will be
+ * advised to lookup again after having adjusted start
+ * and end.
+ *
+ * Note: This way we handle overlaps with multiple
+ * entries and the default type properly.
*/
if (start_state)
*partial_end = base + get_mtrr_size(mask);
@@ -193,59 +219,94 @@
end = *partial_end - 1; /* end is inclusive */
*repeat = 1;
+ *uniform = 0;
}
if ((start & mask) != (base & mask))
continue;
curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
- if (prev_match == 0xFF) {
+ if (prev_match == MTRR_TYPE_INVALID) {
prev_match = curr_match;
continue;
}
+ *uniform = 0;
if (check_type_overlap(&prev_match, &curr_match))
return curr_match;
}
- if (mtrr_tom2) {
- if (start >= (1ULL<<32) && (end < mtrr_tom2))
- return MTRR_TYPE_WRBACK;
- }
-
- if (prev_match != 0xFF)
+ if (prev_match != MTRR_TYPE_INVALID)
return prev_match;
return mtrr_state.def_type;
}
-/*
- * Returns the effective MTRR type for the region
- * Error return:
- * 0xFF - when MTRR is not enabled
+/**
+ * mtrr_type_lookup - look up memory type in MTRR
+ *
+ * Return Values:
+ * MTRR_TYPE_(type) - The effective MTRR type for the region
+ * MTRR_TYPE_INVALID - MTRR is disabled
+ *
+ * Output Argument:
+ * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the
+ * region is fully covered by a single MTRR entry or the default
+ * type.
*/
-u8 mtrr_type_lookup(u64 start, u64 end)
+u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform)
{
- u8 type, prev_type;
+ u8 type, prev_type, is_uniform = 1, dummy;
int repeat;
u64 partial_end;
- type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+ if (!mtrr_state_set)
+ return MTRR_TYPE_INVALID;
+
+ if (!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED))
+ return MTRR_TYPE_INVALID;
+
+ /*
+ * Look up the fixed ranges first, which take priority over
+ * the variable ranges.
+ */
+ if ((start < 0x100000) &&
+ (mtrr_state.have_fixed) &&
+ (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
+ is_uniform = 0;
+ type = mtrr_type_lookup_fixed(start, end);
+ goto out;
+ }
+
+ /*
+ * Look up the variable ranges. Look of multiple ranges matching
+ * this address and pick type as per MTRR precedence.
+ */
+ type = mtrr_type_lookup_variable(start, end, &partial_end,
+ &repeat, &is_uniform);
/*
* Common path is with repeat = 0.
* However, we can have cases where [start:end] spans across some
- * MTRR range. Do repeated lookups for that case here.
+ * MTRR ranges and/or the default type. Do repeated lookups for
+ * that case here.
*/
while (repeat) {
prev_type = type;
start = partial_end;
- type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+ is_uniform = 0;
+ type = mtrr_type_lookup_variable(start, end, &partial_end,
+ &repeat, &dummy);
if (check_type_overlap(&prev_type, &type))
- return type;
+ goto out;
}
+ if (mtrr_tom2 && (start >= (1ULL<<32)) && (end < mtrr_tom2))
+ type = MTRR_TYPE_WRBACK;
+
+out:
+ *uniform = is_uniform;
return type;
}
@@ -347,7 +408,9 @@
mtrr_attrib_to_str(mtrr_state.def_type));
if (mtrr_state.have_fixed) {
pr_debug("MTRR fixed ranges %sabled:\n",
- mtrr_state.enabled & 1 ? "en" : "dis");
+ ((mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) &&
+ (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) ?
+ "en" : "dis");
print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0);
for (i = 0; i < 2; ++i)
print_fixed(0x80000 + i * 0x20000, 0x04000,
@@ -360,7 +423,7 @@
print_fixed_last();
}
pr_debug("MTRR variable ranges %sabled:\n",
- mtrr_state.enabled & 2 ? "en" : "dis");
+ mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED ? "en" : "dis");
high_width = (__ffs64(size_or_mask) - (32 - PAGE_SHIFT) + 3) / 4;
for (i = 0; i < num_var_ranges; ++i) {
@@ -382,7 +445,7 @@
}
/* Grab all of the MTRR state for this CPU into *state */
-void __init get_mtrr_state(void)
+bool __init get_mtrr_state(void)
{
struct mtrr_var_range *vrs;
unsigned long flags;
@@ -426,6 +489,8 @@
post_set();
local_irq_restore(flags);
+
+ return !!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED);
}
/* Some BIOS's are messed up and don't set all MTRRs the same! */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index ea5f363..e7ed0d8 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -59,6 +59,12 @@
#define MTRR_TO_PHYS_WC_OFFSET 1000
u32 num_var_ranges;
+static bool __mtrr_enabled;
+
+static bool mtrr_enabled(void)
+{
+ return __mtrr_enabled;
+}
unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
static DEFINE_MUTEX(mtrr_mutex);
@@ -286,7 +292,7 @@
int i, replace, error;
mtrr_type ltype;
- if (!mtrr_if)
+ if (!mtrr_enabled())
return -ENXIO;
error = mtrr_if->validate_add_page(base, size, type);
@@ -435,6 +441,8 @@
int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
bool increment)
{
+ if (!mtrr_enabled())
+ return -ENODEV;
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
@@ -463,8 +471,8 @@
unsigned long lbase, lsize;
int error = -EINVAL;
- if (!mtrr_if)
- return -ENXIO;
+ if (!mtrr_enabled())
+ return -ENODEV;
max = num_var_ranges;
/* No CPU hotplug when we change MTRR entries */
@@ -523,6 +531,8 @@
*/
int mtrr_del(int reg, unsigned long base, unsigned long size)
{
+ if (!mtrr_enabled())
+ return -ENODEV;
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
@@ -538,6 +548,9 @@
* attempts to add a WC MTRR covering size bytes starting at base and
* logs an error if this fails.
*
+ * The called should provide a power of two size on an equivalent
+ * power of two boundary.
+ *
* Drivers must store the return value to pass to mtrr_del_wc_if_needed,
* but drivers should not try to interpret that return value.
*/
@@ -545,7 +558,7 @@
{
int ret;
- if (pat_enabled)
+ if (pat_enabled() || !mtrr_enabled())
return 0; /* Success! (We don't need to do anything.) */
ret = mtrr_add(base, size, MTRR_TYPE_WRCOMB, true);
@@ -577,7 +590,7 @@
EXPORT_SYMBOL(arch_phys_wc_del);
/*
- * phys_wc_to_mtrr_index - translates arch_phys_wc_add's return value
+ * arch_phys_wc_index - translates arch_phys_wc_add's return value
* @handle: Return value from arch_phys_wc_add
*
* This will turn the return value from arch_phys_wc_add into an mtrr
@@ -587,14 +600,14 @@
* in printk line. Alas there is an illegitimate use in some ancient
* drm ioctls.
*/
-int phys_wc_to_mtrr_index(int handle)
+int arch_phys_wc_index(int handle)
{
if (handle < MTRR_TO_PHYS_WC_OFFSET)
return -1;
else
return handle - MTRR_TO_PHYS_WC_OFFSET;
}
-EXPORT_SYMBOL_GPL(phys_wc_to_mtrr_index);
+EXPORT_SYMBOL_GPL(arch_phys_wc_index);
/*
* HACK ALERT!
@@ -734,10 +747,12 @@
}
if (mtrr_if) {
+ __mtrr_enabled = true;
set_num_var_ranges();
init_table();
if (use_intel()) {
- get_mtrr_state();
+ /* BIOS may override */
+ __mtrr_enabled = get_mtrr_state();
if (mtrr_cleanup(phys_addr)) {
changed_by_mtrr_cleanup = 1;
@@ -745,10 +760,16 @@
}
}
}
+
+ if (!mtrr_enabled())
+ pr_info("MTRR: Disabled\n");
}
void mtrr_ap_init(void)
{
+ if (!mtrr_enabled())
+ return;
+
if (!use_intel() || mtrr_aps_delayed_init)
return;
/*
@@ -774,6 +795,9 @@
{
int first_cpu;
+ if (!mtrr_enabled())
+ return;
+
get_online_cpus();
first_cpu = cpumask_first(cpu_online_mask);
smp_call_function_single(first_cpu, mtrr_save_fixed_ranges, NULL, 1);
@@ -782,6 +806,8 @@
void set_mtrr_aps_delayed_init(void)
{
+ if (!mtrr_enabled())
+ return;
if (!use_intel())
return;
@@ -793,7 +819,7 @@
*/
void mtrr_aps_init(void)
{
- if (!use_intel())
+ if (!use_intel() || !mtrr_enabled())
return;
/*
@@ -810,7 +836,7 @@
void mtrr_bp_restore(void)
{
- if (!use_intel())
+ if (!use_intel() || !mtrr_enabled())
return;
mtrr_if->set_all();
@@ -818,7 +844,7 @@
static int __init mtrr_init_finialize(void)
{
- if (!mtrr_if)
+ if (!mtrr_enabled())
return 0;
if (use_intel()) {
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index df5e41f..951884d 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -51,7 +51,7 @@
void fill_mtrr_var_range(unsigned int index,
u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
-void get_mtrr_state(void);
+bool get_mtrr_state(void);
extern void set_mtrr_ops(const struct mtrr_ops *ops);
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index c76d3e3..e068d66 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -22,6 +22,7 @@
#include <linux/elfcore.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <asm/processor.h>
#include <asm/hardirq.h>
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 6367a78..5ee7718 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -4,7 +4,6 @@
#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/io.h>
-#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/of.h>
@@ -17,6 +16,7 @@
#include <linux/of_pci.h>
#include <linux/initrd.h>
+#include <asm/irqdomain.h>
#include <asm/hpet.h>
#include <asm/apic.h>
#include <asm/pci_x86.h>
@@ -196,38 +196,31 @@
},
};
-static int ioapic_xlate(struct irq_domain *domain,
- struct device_node *controller,
- const u32 *intspec, u32 intsize,
- irq_hw_number_t *out_hwirq, u32 *out_type)
+static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
{
+ struct of_phandle_args *irq_data = (void *)arg;
struct of_ioapic_type *it;
- u32 line, idx, gsi;
+ struct irq_alloc_info tmp;
- if (WARN_ON(intsize < 2))
+ if (WARN_ON(irq_data->args_count < 2))
+ return -EINVAL;
+ if (irq_data->args[1] >= ARRAY_SIZE(of_ioapic_type))
return -EINVAL;
- line = intspec[0];
+ it = &of_ioapic_type[irq_data->args[1]];
+ ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->trigger, it->polarity);
+ tmp.ioapic_id = mpc_ioapic_id(mp_irqdomain_ioapic_idx(domain));
+ tmp.ioapic_pin = irq_data->args[0];
- if (intspec[1] >= ARRAY_SIZE(of_ioapic_type))
- return -EINVAL;
-
- it = &of_ioapic_type[intspec[1]];
-
- idx = (u32)(long)domain->host_data;
- gsi = mp_pin_to_gsi(idx, line);
- if (mp_set_gsi_attr(gsi, it->trigger, it->polarity, cpu_to_node(0)))
- return -EBUSY;
-
- *out_hwirq = line;
- *out_type = it->out_type;
- return 0;
+ return mp_irqdomain_alloc(domain, virq, nr_irqs, &tmp);
}
-const struct irq_domain_ops ioapic_irq_domain_ops = {
- .map = mp_irqdomain_map,
- .unmap = mp_irqdomain_unmap,
- .xlate = ioapic_xlate,
+static const struct irq_domain_ops ioapic_irq_domain_ops = {
+ .alloc = dt_irqdomain_alloc,
+ .free = mp_irqdomain_free,
+ .activate = mp_irqdomain_activate,
+ .deactivate = mp_irqdomain_deactivate,
};
static void __init dtb_add_ioapic(struct device_node *dn)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index fe9f0b7..5cb9a4d 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -627,8 +627,12 @@
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
QFLAG_APPLY_ONCE, intel_graphics_stolen },
/*
- * HPET on current version of Baytrail platform has accuracy
- * problems, disable it for now:
+ * HPET on the current version of the Baytrail platform has accuracy
+ * problems: it will halt in deep idle state - so we disable it.
+ *
+ * More details can be found in section 18.10.1.3 of the datasheet:
+ *
+ * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf
*/
{ PCI_VENDOR_ID_INTEL, 0x0f00,
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
deleted file mode 100644
index 1c30976..0000000
--- a/arch/x86/kernel/entry_32.S
+++ /dev/null
@@ -1,1401 +0,0 @@
-/*
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
- *
- * Stack layout in 'syscall_exit':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in fork.c:copy_process, signal.c:do_signal,
- * ptrace.c and ptrace.h
- *
- * 0(%esp) - %ebx
- * 4(%esp) - %ecx
- * 8(%esp) - %edx
- * C(%esp) - %esi
- * 10(%esp) - %edi
- * 14(%esp) - %ebp
- * 18(%esp) - %eax
- * 1C(%esp) - %ds
- * 20(%esp) - %es
- * 24(%esp) - %fs
- * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS
- * 2C(%esp) - orig_eax
- * 30(%esp) - %eip
- * 34(%esp) - %cs
- * 38(%esp) - %eflags
- * 3C(%esp) - %oldesp
- * 40(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
- */
-
-#include <linux/linkage.h>
-#include <linux/err.h>
-#include <asm/thread_info.h>
-#include <asm/irqflags.h>
-#include <asm/errno.h>
-#include <asm/segment.h>
-#include <asm/smp.h>
-#include <asm/page_types.h>
-#include <asm/percpu.h>
-#include <asm/dwarf2.h>
-#include <asm/processor-flags.h>
-#include <asm/ftrace.h>
-#include <asm/irq_vectors.h>
-#include <asm/cpufeature.h>
-#include <asm/alternative-asm.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE 0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysenter_audit syscall_trace_entry
-#define sysexit_audit syscall_exit_work
-#endif
-
- .section .entry.text, "ax"
-
-/*
- * We use macros for low-level operations which need to be overridden
- * for paravirtualization. The following will never clobber any registers:
- * INTERRUPT_RETURN (aka. "iret")
- * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
- *
- * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
- * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
- * Allowing a register to be clobbered can shrink the paravirt replacement
- * enough to patch inline, increasing performance.
- */
-
-#ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
-#else
-#define preempt_stop(clobbers)
-#define resume_kernel restore_all
-#endif
-
-.macro TRACE_IRQS_IRET
-#ifdef CONFIG_TRACE_IRQFLAGS
- testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off?
- jz 1f
- TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * User gs save/restore
- *
- * %gs is used for userland TLS and kernel only uses it for stack
- * canary which is required to be at %gs:20 by gcc. Read the comment
- * at the top of stackprotector.h for more info.
- *
- * Local labels 98 and 99 are used.
- */
-#ifdef CONFIG_X86_32_LAZY_GS
-
- /* unfortunately push/pop can't be no-op */
-.macro PUSH_GS
- pushl_cfi $0
-.endm
-.macro POP_GS pop=0
- addl $(4 + \pop), %esp
- CFI_ADJUST_CFA_OFFSET -(4 + \pop)
-.endm
-.macro POP_GS_EX
-.endm
-
- /* all the rest are no-op */
-.macro PTGS_TO_GS
-.endm
-.macro PTGS_TO_GS_EX
-.endm
-.macro GS_TO_REG reg
-.endm
-.macro REG_TO_PTGS reg
-.endm
-.macro SET_KERNEL_GS reg
-.endm
-
-#else /* CONFIG_X86_32_LAZY_GS */
-
-.macro PUSH_GS
- pushl_cfi %gs
- /*CFI_REL_OFFSET gs, 0*/
-.endm
-
-.macro POP_GS pop=0
-98: popl_cfi %gs
- /*CFI_RESTORE gs*/
- .if \pop <> 0
- add $\pop, %esp
- CFI_ADJUST_CFA_OFFSET -\pop
- .endif
-.endm
-.macro POP_GS_EX
-.pushsection .fixup, "ax"
-99: movl $0, (%esp)
- jmp 98b
-.popsection
- _ASM_EXTABLE(98b,99b)
-.endm
-
-.macro PTGS_TO_GS
-98: mov PT_GS(%esp), %gs
-.endm
-.macro PTGS_TO_GS_EX
-.pushsection .fixup, "ax"
-99: movl $0, PT_GS(%esp)
- jmp 98b
-.popsection
- _ASM_EXTABLE(98b,99b)
-.endm
-
-.macro GS_TO_REG reg
- movl %gs, \reg
- /*CFI_REGISTER gs, \reg*/
-.endm
-.macro REG_TO_PTGS reg
- movl \reg, PT_GS(%esp)
- /*CFI_REL_OFFSET gs, PT_GS*/
-.endm
-.macro SET_KERNEL_GS reg
- movl $(__KERNEL_STACK_CANARY), \reg
- movl \reg, %gs
-.endm
-
-#endif /* CONFIG_X86_32_LAZY_GS */
-
-.macro SAVE_ALL
- cld
- PUSH_GS
- pushl_cfi %fs
- /*CFI_REL_OFFSET fs, 0;*/
- pushl_cfi %es
- /*CFI_REL_OFFSET es, 0;*/
- pushl_cfi %ds
- /*CFI_REL_OFFSET ds, 0;*/
- pushl_cfi %eax
- CFI_REL_OFFSET eax, 0
- pushl_cfi %ebp
- CFI_REL_OFFSET ebp, 0
- pushl_cfi %edi
- CFI_REL_OFFSET edi, 0
- pushl_cfi %esi
- CFI_REL_OFFSET esi, 0
- pushl_cfi %edx
- CFI_REL_OFFSET edx, 0
- pushl_cfi %ecx
- CFI_REL_OFFSET ecx, 0
- pushl_cfi %ebx
- CFI_REL_OFFSET ebx, 0
- movl $(__USER_DS), %edx
- movl %edx, %ds
- movl %edx, %es
- movl $(__KERNEL_PERCPU), %edx
- movl %edx, %fs
- SET_KERNEL_GS %edx
-.endm
-
-.macro RESTORE_INT_REGS
- popl_cfi %ebx
- CFI_RESTORE ebx
- popl_cfi %ecx
- CFI_RESTORE ecx
- popl_cfi %edx
- CFI_RESTORE edx
- popl_cfi %esi
- CFI_RESTORE esi
- popl_cfi %edi
- CFI_RESTORE edi
- popl_cfi %ebp
- CFI_RESTORE ebp
- popl_cfi %eax
- CFI_RESTORE eax
-.endm
-
-.macro RESTORE_REGS pop=0
- RESTORE_INT_REGS
-1: popl_cfi %ds
- /*CFI_RESTORE ds;*/
-2: popl_cfi %es
- /*CFI_RESTORE es;*/
-3: popl_cfi %fs
- /*CFI_RESTORE fs;*/
- POP_GS \pop
-.pushsection .fixup, "ax"
-4: movl $0, (%esp)
- jmp 1b
-5: movl $0, (%esp)
- jmp 2b
-6: movl $0, (%esp)
- jmp 3b
-.popsection
- _ASM_EXTABLE(1b,4b)
- _ASM_EXTABLE(2b,5b)
- _ASM_EXTABLE(3b,6b)
- POP_GS_EX
-.endm
-
-.macro RING0_INT_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 3*4
- /*CFI_OFFSET cs, -2*4;*/
- CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_EC_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 4*4
- /*CFI_OFFSET cs, -2*4;*/
- CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_PTREGS_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
- /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
- CFI_OFFSET eip, PT_EIP-PT_OLDESP
- /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
- /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
- CFI_OFFSET eax, PT_EAX-PT_OLDESP
- CFI_OFFSET ebp, PT_EBP-PT_OLDESP
- CFI_OFFSET edi, PT_EDI-PT_OLDESP
- CFI_OFFSET esi, PT_ESI-PT_OLDESP
- CFI_OFFSET edx, PT_EDX-PT_OLDESP
- CFI_OFFSET ecx, PT_ECX-PT_OLDESP
- CFI_OFFSET ebx, PT_EBX-PT_OLDESP
-.endm
-
-ENTRY(ret_from_fork)
- CFI_STARTPROC
- pushl_cfi %eax
- call schedule_tail
- GET_THREAD_INFO(%ebp)
- popl_cfi %eax
- pushl_cfi $0x0202 # Reset kernel eflags
- popfl_cfi
- jmp syscall_exit
- CFI_ENDPROC
-END(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
- CFI_STARTPROC
- pushl_cfi %eax
- call schedule_tail
- GET_THREAD_INFO(%ebp)
- popl_cfi %eax
- pushl_cfi $0x0202 # Reset kernel eflags
- popfl_cfi
- movl PT_EBP(%esp),%eax
- call *PT_EBX(%esp)
- movl $0,PT_EAX(%esp)
- jmp syscall_exit
- CFI_ENDPROC
-ENDPROC(ret_from_kernel_thread)
-
-/*
- * Return to user mode is not as complex as all this looks,
- * but we want the default path for a system call return to
- * go as quickly as possible which is why some of this is
- * less clear than it otherwise should be.
- */
-
- # userspace resumption stub bypassing syscall exit tracing
- ALIGN
- RING0_PTREGS_FRAME
-ret_from_exception:
- preempt_stop(CLBR_ANY)
-ret_from_intr:
- GET_THREAD_INFO(%ebp)
-#ifdef CONFIG_VM86
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
- movb PT_CS(%esp), %al
- andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
-#else
- /*
- * We can be coming here from child spawned by kernel_thread().
- */
- movl PT_CS(%esp), %eax
- andl $SEGMENT_RPL_MASK, %eax
-#endif
- cmpl $USER_RPL, %eax
- jb resume_kernel # not returning to v8086 or userspace
-
-ENTRY(resume_userspace)
- LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
- # int/exception return?
- jne work_pending
- jmp restore_all
-END(ret_from_exception)
-
-#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
- DISABLE_INTERRUPTS(CLBR_ANY)
-need_resched:
- cmpl $0,PER_CPU_VAR(__preempt_count)
- jnz restore_all
- testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ?
- jz restore_all
- call preempt_schedule_irq
- jmp need_resched
-END(resume_kernel)
-#endif
- CFI_ENDPROC
-
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
- the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
-
- # sysenter call handler stub
-ENTRY(ia32_sysenter_target)
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 0
- CFI_REGISTER esp, ebp
- movl TSS_sysenter_sp0(%esp),%esp
-sysenter_past_esp:
- /*
- * Interrupts are disabled here, but we can't trace it until
- * enough kernel state to call TRACE_IRQS_OFF can be called - but
- * we immediately enable interrupts at that point anyway.
- */
- pushl_cfi $__USER_DS
- /*CFI_REL_OFFSET ss, 0*/
- pushl_cfi %ebp
- CFI_REL_OFFSET esp, 0
- pushfl_cfi
- orl $X86_EFLAGS_IF, (%esp)
- pushl_cfi $__USER_CS
- /*CFI_REL_OFFSET cs, 0*/
- /*
- * Push current_thread_info()->sysenter_return to the stack.
- * A tiny bit of offset fixup is necessary: TI_sysenter_return
- * is relative to thread_info, which is at the bottom of the
- * kernel stack page. 4*4 means the 4 words pushed above;
- * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
- * and THREAD_SIZE takes us to the bottom.
- */
- pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
- CFI_REL_OFFSET eip, 0
-
- pushl_cfi %eax
- SAVE_ALL
- ENABLE_INTERRUPTS(CLBR_NONE)
-
-/*
- * Load the potential sixth argument from user stack.
- * Careful about security.
- */
- cmpl $__PAGE_OFFSET-3,%ebp
- jae syscall_fault
- ASM_STAC
-1: movl (%ebp),%ebp
- ASM_CLAC
- movl %ebp,PT_EBP(%esp)
- _ASM_EXTABLE(1b,syscall_fault)
-
- GET_THREAD_INFO(%ebp)
-
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
- jnz sysenter_audit
-sysenter_do_call:
- cmpl $(NR_syscalls), %eax
- jae sysenter_badsys
- call *sys_call_table(,%eax,4)
-sysenter_after_call:
- movl %eax,PT_EAX(%esp)
- LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $_TIF_ALLWORK_MASK, %ecx
- jnz sysexit_audit
-sysenter_exit:
-/* if something modifies registers it must also disable sysexit */
- movl PT_EIP(%esp), %edx
- movl PT_OLDESP(%esp), %ecx
- xorl %ebp,%ebp
- TRACE_IRQS_ON
-1: mov PT_FS(%esp), %fs
- PTGS_TO_GS
- ENABLE_INTERRUPTS_SYSEXIT
-
-#ifdef CONFIG_AUDITSYSCALL
-sysenter_audit:
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
- jnz syscall_trace_entry
- /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
- movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
- /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
- pushl_cfi PT_ESI(%esp) /* a3: 5th arg */
- pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */
- call __audit_syscall_entry
- popl_cfi %ecx /* get that remapped edx off the stack */
- popl_cfi %ecx /* get that remapped esi off the stack */
- movl PT_EAX(%esp),%eax /* reload syscall number */
- jmp sysenter_do_call
-
-sysexit_audit:
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
- jnz syscall_exit_work
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_ANY)
- movl %eax,%edx /* second arg, syscall return value */
- cmpl $-MAX_ERRNO,%eax /* is it an error ? */
- setbe %al /* 1 if so, 0 if not */
- movzbl %al,%eax /* zero-extend that */
- call __audit_syscall_exit
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
- jnz syscall_exit_work
- movl PT_EAX(%esp),%eax /* reload syscall return value */
- jmp sysenter_exit
-#endif
-
- CFI_ENDPROC
-.pushsection .fixup,"ax"
-2: movl $0,PT_FS(%esp)
- jmp 1b
-.popsection
- _ASM_EXTABLE(1b,2b)
- PTGS_TO_GS_EX
-ENDPROC(ia32_sysenter_target)
-
- # system call handler stub
-ENTRY(system_call)
- RING0_INT_FRAME # can't unwind into user space anyway
- ASM_CLAC
- pushl_cfi %eax # save orig_eax
- SAVE_ALL
- GET_THREAD_INFO(%ebp)
- # system call tracing in operation / emulation
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
- jnz syscall_trace_entry
- cmpl $(NR_syscalls), %eax
- jae syscall_badsys
-syscall_call:
- call *sys_call_table(,%eax,4)
-syscall_after_call:
- movl %eax,PT_EAX(%esp) # store the return value
-syscall_exit:
- LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testl $_TIF_ALLWORK_MASK, %ecx # current->work
- jnz syscall_exit_work
-
-restore_all:
- TRACE_IRQS_IRET
-restore_all_notrace:
-#ifdef CONFIG_X86_ESPFIX32
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
- # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
- # are returning to the kernel.
- # See comments in process.c:copy_thread() for details.
- movb PT_OLDSS(%esp), %ah
- movb PT_CS(%esp), %al
- andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
- cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
- CFI_REMEMBER_STATE
- je ldt_ss # returning to user-space with LDT SS
-#endif
-restore_nocheck:
- RESTORE_REGS 4 # skip orig_eax/error_code
-irq_return:
- INTERRUPT_RETURN
-.section .fixup,"ax"
-ENTRY(iret_exc)
- pushl $0 # no error code
- pushl $do_iret_error
- jmp error_code
-.previous
- _ASM_EXTABLE(irq_return,iret_exc)
-
-#ifdef CONFIG_X86_ESPFIX32
- CFI_RESTORE_STATE
-ldt_ss:
-#ifdef CONFIG_PARAVIRT
- /*
- * The kernel can't run on a non-flat stack if paravirt mode
- * is active. Rather than try to fixup the high bits of
- * ESP, bypass this code entirely. This may break DOSemu
- * and/or Wine support in a paravirt VM, although the option
- * is still available to implement the setting of the high
- * 16-bits in the INTERRUPT_RETURN paravirt-op.
- */
- cmpl $0, pv_info+PARAVIRT_enabled
- jne restore_nocheck
-#endif
-
-/*
- * Setup and switch to ESPFIX stack
- *
- * We're returning to userspace with a 16 bit stack. The CPU will not
- * restore the high word of ESP for us on executing iret... This is an
- * "official" bug of all the x86-compatible CPUs, which we can work
- * around to make dosemu and wine happy. We do this by preloading the
- * high word of ESP with the high word of the userspace ESP while
- * compensating for the offset by changing to the ESPFIX segment with
- * a base address that matches for the difference.
- */
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
- mov %esp, %edx /* load kernel esp */
- mov PT_OLDESP(%esp), %eax /* load userspace esp */
- mov %dx, %ax /* eax: new kernel esp */
- sub %eax, %edx /* offset (low word is 0) */
- shr $16, %edx
- mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
- mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
- pushl_cfi $__ESPFIX_SS
- pushl_cfi %eax /* new kernel esp */
- /* Disable interrupts, but do not irqtrace this section: we
- * will soon execute iret and the tracer was already set to
- * the irqstate after the iret */
- DISABLE_INTERRUPTS(CLBR_EAX)
- lss (%esp), %esp /* switch to espfix segment */
- CFI_ADJUST_CFA_OFFSET -8
- jmp restore_nocheck
-#endif
- CFI_ENDPROC
-ENDPROC(system_call)
-
- # perform work that needs to be done immediately before resumption
- ALIGN
- RING0_PTREGS_FRAME # can't unwind into user space anyway
-work_pending:
- testb $_TIF_NEED_RESCHED, %cl
- jz work_notifysig
-work_resched:
- call schedule
- LOCKDEP_SYS_EXIT
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
- # than syscall tracing?
- jz restore_all
- testb $_TIF_NEED_RESCHED, %cl
- jnz work_resched
-
-work_notifysig: # deal with pending signals and
- # notify-resume requests
-#ifdef CONFIG_VM86
- testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
- movl %esp, %eax
- jnz work_notifysig_v86 # returning to kernel-space or
- # vm86-space
-1:
-#else
- movl %esp, %eax
-#endif
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- movb PT_CS(%esp), %bl
- andb $SEGMENT_RPL_MASK, %bl
- cmpb $USER_RPL, %bl
- jb resume_kernel
- xorl %edx, %edx
- call do_notify_resume
- jmp resume_userspace
-
-#ifdef CONFIG_VM86
- ALIGN
-work_notifysig_v86:
- pushl_cfi %ecx # save ti_flags for do_notify_resume
- call save_v86_state # %eax contains pt_regs pointer
- popl_cfi %ecx
- movl %eax, %esp
- jmp 1b
-#endif
-END(work_pending)
-
- # perform syscall exit tracing
- ALIGN
-syscall_trace_entry:
- movl $-ENOSYS,PT_EAX(%esp)
- movl %esp, %eax
- call syscall_trace_enter
- /* What it returned is what we'll actually use. */
- cmpl $(NR_syscalls), %eax
- jnae syscall_call
- jmp syscall_exit
-END(syscall_trace_entry)
-
- # perform syscall exit tracing
- ALIGN
-syscall_exit_work:
- testl $_TIF_WORK_SYSCALL_EXIT, %ecx
- jz work_pending
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call
- # schedule() instead
- movl %esp, %eax
- call syscall_trace_leave
- jmp resume_userspace
-END(syscall_exit_work)
- CFI_ENDPROC
-
- RING0_INT_FRAME # can't unwind into user space anyway
-syscall_fault:
- ASM_CLAC
- GET_THREAD_INFO(%ebp)
- movl $-EFAULT,PT_EAX(%esp)
- jmp resume_userspace
-END(syscall_fault)
-
-syscall_badsys:
- movl $-ENOSYS,%eax
- jmp syscall_after_call
-END(syscall_badsys)
-
-sysenter_badsys:
- movl $-ENOSYS,%eax
- jmp sysenter_after_call
-END(sysenter_badsys)
- CFI_ENDPROC
-
-.macro FIXUP_ESPFIX_STACK
-/*
- * Switch back for ESPFIX stack to the normal zerobased stack
- *
- * We can't call C functions using the ESPFIX stack. This code reads
- * the high word of the segment base from the GDT and swiches to the
- * normal stack and adjusts ESP with the matching offset.
- */
-#ifdef CONFIG_X86_ESPFIX32
- /* fixup the stack */
- mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
- mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
- shl $16, %eax
- addl %esp, %eax /* the adjusted stack pointer */
- pushl_cfi $__KERNEL_DS
- pushl_cfi %eax
- lss (%esp), %esp /* switch to the normal stack segment */
- CFI_ADJUST_CFA_OFFSET -8
-#endif
-.endm
-.macro UNWIND_ESPFIX_STACK
-#ifdef CONFIG_X86_ESPFIX32
- movl %ss, %eax
- /* see if on espfix stack */
- cmpw $__ESPFIX_SS, %ax
- jne 27f
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
- movl %eax, %es
- /* switch to normal stack */
- FIXUP_ESPFIX_STACK
-27:
-#endif
-.endm
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
- .align 8
-ENTRY(irq_entries_start)
- RING0_INT_FRAME
- vector=FIRST_EXTERNAL_VECTOR
- .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
- pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */
- vector=vector+1
- jmp common_interrupt
- CFI_ADJUST_CFA_OFFSET -4
- .align 8
- .endr
-END(irq_entries_start)
-
-/*
- * the CPU automatically disables interrupts when executing an IRQ vector,
- * so IRQ-flags tracing has to follow that:
- */
- .p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
- ASM_CLAC
- addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */
- SAVE_ALL
- TRACE_IRQS_OFF
- movl %esp,%eax
- call do_IRQ
- jmp ret_from_intr
-ENDPROC(common_interrupt)
- CFI_ENDPROC
-
-#define BUILD_INTERRUPT3(name, nr, fn) \
-ENTRY(name) \
- RING0_INT_FRAME; \
- ASM_CLAC; \
- pushl_cfi $~(nr); \
- SAVE_ALL; \
- TRACE_IRQS_OFF \
- movl %esp,%eax; \
- call fn; \
- jmp ret_from_intr; \
- CFI_ENDPROC; \
-ENDPROC(name)
-
-
-#ifdef CONFIG_TRACING
-#define TRACE_BUILD_INTERRUPT(name, nr) \
- BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
-#else
-#define TRACE_BUILD_INTERRUPT(name, nr)
-#endif
-
-#define BUILD_INTERRUPT(name, nr) \
- BUILD_INTERRUPT3(name, nr, smp_##name); \
- TRACE_BUILD_INTERRUPT(name, nr)
-
-/* The include is where all of the SMP etc. interrupts come from */
-#include <asm/entry_arch.h>
-
-ENTRY(coprocessor_error)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_coprocessor_error
- jmp error_code
- CFI_ENDPROC
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
-#ifdef CONFIG_X86_INVD_BUG
- /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
- ALTERNATIVE "pushl_cfi $do_general_protection", \
- "pushl $do_simd_coprocessor_error", \
- X86_FEATURE_XMM
-#else
- pushl_cfi $do_simd_coprocessor_error
-#endif
- jmp error_code
- CFI_ENDPROC
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $-1 # mark this as an int
- pushl_cfi $do_device_not_available
- jmp error_code
- CFI_ENDPROC
-END(device_not_available)
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
- iret
- _ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
-
-ENTRY(native_irq_enable_sysexit)
- sti
- sysexit
-END(native_irq_enable_sysexit)
-#endif
-
-ENTRY(overflow)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_overflow
- jmp error_code
- CFI_ENDPROC
-END(overflow)
-
-ENTRY(bounds)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_bounds
- jmp error_code
- CFI_ENDPROC
-END(bounds)
-
-ENTRY(invalid_op)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_invalid_op
- jmp error_code
- CFI_ENDPROC
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_coprocessor_segment_overrun
- jmp error_code
- CFI_ENDPROC
-END(coprocessor_segment_overrun)
-
-ENTRY(invalid_TSS)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_invalid_TSS
- jmp error_code
- CFI_ENDPROC
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_segment_not_present
- jmp error_code
- CFI_ENDPROC
-END(segment_not_present)
-
-ENTRY(stack_segment)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_stack_segment
- jmp error_code
- CFI_ENDPROC
-END(stack_segment)
-
-ENTRY(alignment_check)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_alignment_check
- jmp error_code
- CFI_ENDPROC
-END(alignment_check)
-
-ENTRY(divide_error)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0 # no error code
- pushl_cfi $do_divide_error
- jmp error_code
- CFI_ENDPROC
-END(divide_error)
-
-#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi machine_check_vector
- jmp error_code
- CFI_ENDPROC
-END(machine_check)
-#endif
-
-ENTRY(spurious_interrupt_bug)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_spurious_interrupt_bug
- jmp error_code
- CFI_ENDPROC
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_XEN
-/* Xen doesn't set %esp to be precisely what the normal sysenter
- entrypoint expects, so fix it up before using the normal path. */
-ENTRY(xen_sysenter_target)
- RING0_INT_FRAME
- addl $5*4, %esp /* remove xen-provided frame */
- CFI_ADJUST_CFA_OFFSET -5*4
- jmp sysenter_past_esp
- CFI_ENDPROC
-
-ENTRY(xen_hypervisor_callback)
- CFI_STARTPROC
- pushl_cfi $-1 /* orig_ax = -1 => not a system call */
- SAVE_ALL
- TRACE_IRQS_OFF
-
- /* Check to see if we got the event in the critical
- region in xen_iret_direct, after we've reenabled
- events and checked for pending events. This simulates
- iret instruction's behaviour where it delivers a
- pending interrupt when enabling interrupts. */
- movl PT_EIP(%esp),%eax
- cmpl $xen_iret_start_crit,%eax
- jb 1f
- cmpl $xen_iret_end_crit,%eax
- jae 1f
-
- jmp xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1: mov %esp, %eax
- call xen_evtchn_do_upcall
-#ifndef CONFIG_PREEMPT
- call xen_maybe_preempt_hcall
-#endif
- jmp ret_from_intr
- CFI_ENDPROC
-ENDPROC(xen_hypervisor_callback)
-
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-# 1. Fault while reloading DS, ES, FS or GS
-# 2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
-ENTRY(xen_failsafe_callback)
- CFI_STARTPROC
- pushl_cfi %eax
- movl $1,%eax
-1: mov 4(%esp),%ds
-2: mov 8(%esp),%es
-3: mov 12(%esp),%fs
-4: mov 16(%esp),%gs
- /* EAX == 0 => Category 1 (Bad segment)
- EAX != 0 => Category 2 (Bad IRET) */
- testl %eax,%eax
- popl_cfi %eax
- lea 16(%esp),%esp
- CFI_ADJUST_CFA_OFFSET -16
- jz 5f
- jmp iret_exc
-5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */
- SAVE_ALL
- jmp ret_from_exception
- CFI_ENDPROC
-
-.section .fixup,"ax"
-6: xorl %eax,%eax
- movl %eax,4(%esp)
- jmp 1b
-7: xorl %eax,%eax
- movl %eax,8(%esp)
- jmp 2b
-8: xorl %eax,%eax
- movl %eax,12(%esp)
- jmp 3b
-9: xorl %eax,%eax
- movl %eax,16(%esp)
- jmp 4b
-.previous
- _ASM_EXTABLE(1b,6b)
- _ASM_EXTABLE(2b,7b)
- _ASM_EXTABLE(3b,8b)
- _ASM_EXTABLE(4b,9b)
-ENDPROC(xen_failsafe_callback)
-
-BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
- xen_evtchn_do_upcall)
-
-#endif /* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-
-BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
- hyperv_vector_handler)
-
-#endif /* CONFIG_HYPERV */
-
-#ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-ENTRY(mcount)
- ret
-END(mcount)
-
-ENTRY(ftrace_caller)
- pushl %eax
- pushl %ecx
- pushl %edx
- pushl $0 /* Pass NULL as regs pointer */
- movl 4*4(%esp), %eax
- movl 0x4(%ebp), %edx
- movl function_trace_op, %ecx
- subl $MCOUNT_INSN_SIZE, %eax
-
-.globl ftrace_call
-ftrace_call:
- call ftrace_stub
-
- addl $4,%esp /* skip NULL pointer */
- popl %edx
- popl %ecx
- popl %eax
-ftrace_ret:
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-.globl ftrace_graph_call
-ftrace_graph_call:
- jmp ftrace_stub
-#endif
-
-.globl ftrace_stub
-ftrace_stub:
- ret
-END(ftrace_caller)
-
-ENTRY(ftrace_regs_caller)
- pushf /* push flags before compare (in cs location) */
-
- /*
- * i386 does not save SS and ESP when coming from kernel.
- * Instead, to get sp, ®s->sp is used (see ptrace.h).
- * Unfortunately, that means eflags must be at the same location
- * as the current return ip is. We move the return ip into the
- * ip location, and move flags into the return ip location.
- */
- pushl 4(%esp) /* save return ip into ip slot */
-
- pushl $0 /* Load 0 into orig_ax */
- pushl %gs
- pushl %fs
- pushl %es
- pushl %ds
- pushl %eax
- pushl %ebp
- pushl %edi
- pushl %esi
- pushl %edx
- pushl %ecx
- pushl %ebx
-
- movl 13*4(%esp), %eax /* Get the saved flags */
- movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */
- /* clobbering return ip */
- movl $__KERNEL_CS,13*4(%esp)
-
- movl 12*4(%esp), %eax /* Load ip (1st parameter) */
- subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */
- movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */
- movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
- pushl %esp /* Save pt_regs as 4th parameter */
-
-GLOBAL(ftrace_regs_call)
- call ftrace_stub
-
- addl $4, %esp /* Skip pt_regs */
- movl 14*4(%esp), %eax /* Move flags back into cs */
- movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */
- movl 12*4(%esp), %eax /* Get return ip from regs->ip */
- movl %eax, 14*4(%esp) /* Put return ip back for ret */
-
- popl %ebx
- popl %ecx
- popl %edx
- popl %esi
- popl %edi
- popl %ebp
- popl %eax
- popl %ds
- popl %es
- popl %fs
- popl %gs
- addl $8, %esp /* Skip orig_ax and ip */
- popf /* Pop flags at end (no addl to corrupt flags) */
- jmp ftrace_ret
-
- popf
- jmp ftrace_stub
-#else /* ! CONFIG_DYNAMIC_FTRACE */
-
-ENTRY(mcount)
- cmpl $__PAGE_OFFSET, %esp
- jb ftrace_stub /* Paging not enabled yet? */
-
- cmpl $ftrace_stub, ftrace_trace_function
- jnz trace
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- cmpl $ftrace_stub, ftrace_graph_return
- jnz ftrace_graph_caller
-
- cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
- jnz ftrace_graph_caller
-#endif
-.globl ftrace_stub
-ftrace_stub:
- ret
-
- /* taken from glibc */
-trace:
- pushl %eax
- pushl %ecx
- pushl %edx
- movl 0xc(%esp), %eax
- movl 0x4(%ebp), %edx
- subl $MCOUNT_INSN_SIZE, %eax
-
- call *ftrace_trace_function
-
- popl %edx
- popl %ecx
- popl %eax
- jmp ftrace_stub
-END(mcount)
-#endif /* CONFIG_DYNAMIC_FTRACE */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
- pushl %eax
- pushl %ecx
- pushl %edx
- movl 0xc(%esp), %eax
- lea 0x4(%ebp), %edx
- movl (%ebp), %ecx
- subl $MCOUNT_INSN_SIZE, %eax
- call prepare_ftrace_return
- popl %edx
- popl %ecx
- popl %eax
- ret
-END(ftrace_graph_caller)
-
-.globl return_to_handler
-return_to_handler:
- pushl %eax
- pushl %edx
- movl %ebp, %eax
- call ftrace_return_to_handler
- movl %eax, %ecx
- popl %edx
- popl %eax
- jmp *%ecx
-#endif
-
-#ifdef CONFIG_TRACING
-ENTRY(trace_page_fault)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $trace_do_page_fault
- jmp error_code
- CFI_ENDPROC
-END(trace_page_fault)
-#endif
-
-ENTRY(page_fault)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_page_fault
- ALIGN
-error_code:
- /* the function address is in %gs's slot on the stack */
- pushl_cfi %fs
- /*CFI_REL_OFFSET fs, 0*/
- pushl_cfi %es
- /*CFI_REL_OFFSET es, 0*/
- pushl_cfi %ds
- /*CFI_REL_OFFSET ds, 0*/
- pushl_cfi_reg eax
- pushl_cfi_reg ebp
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg edx
- pushl_cfi_reg ecx
- pushl_cfi_reg ebx
- cld
- movl $(__KERNEL_PERCPU), %ecx
- movl %ecx, %fs
- UNWIND_ESPFIX_STACK
- GS_TO_REG %ecx
- movl PT_GS(%esp), %edi # get the function address
- movl PT_ORIG_EAX(%esp), %edx # get the error code
- movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
- REG_TO_PTGS %ecx
- SET_KERNEL_GS %ecx
- movl $(__USER_DS), %ecx
- movl %ecx, %ds
- movl %ecx, %es
- TRACE_IRQS_OFF
- movl %esp,%eax # pt_regs pointer
- call *%edi
- jmp ret_from_exception
- CFI_ENDPROC
-END(page_fault)
-
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-.macro FIX_STACK offset ok label
- cmpw $__KERNEL_CS, 4(%esp)
- jne \ok
-\label:
- movl TSS_sysenter_sp0 + \offset(%esp), %esp
- CFI_DEF_CFA esp, 0
- CFI_UNDEFINED eip
- pushfl_cfi
- pushl_cfi $__KERNEL_CS
- pushl_cfi $sysenter_past_esp
- CFI_REL_OFFSET eip, 0
-.endm
-
-ENTRY(debug)
- RING0_INT_FRAME
- ASM_CLAC
- cmpl $ia32_sysenter_target,(%esp)
- jne debug_stack_correct
- FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
-debug_stack_correct:
- pushl_cfi $-1 # mark this as an int
- SAVE_ALL
- TRACE_IRQS_OFF
- xorl %edx,%edx # error code 0
- movl %esp,%eax # pt_regs pointer
- call do_debug
- jmp ret_from_exception
- CFI_ENDPROC
-END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-ENTRY(nmi)
- RING0_INT_FRAME
- ASM_CLAC
-#ifdef CONFIG_X86_ESPFIX32
- pushl_cfi %eax
- movl %ss, %eax
- cmpw $__ESPFIX_SS, %ax
- popl_cfi %eax
- je nmi_espfix_stack
-#endif
- cmpl $ia32_sysenter_target,(%esp)
- je nmi_stack_fixup
- pushl_cfi %eax
- movl %esp,%eax
- /* Do not access memory above the end of our stack page,
- * it might not exist.
- */
- andl $(THREAD_SIZE-1),%eax
- cmpl $(THREAD_SIZE-20),%eax
- popl_cfi %eax
- jae nmi_stack_correct
- cmpl $ia32_sysenter_target,12(%esp)
- je nmi_debug_stack_check
-nmi_stack_correct:
- /* We have a RING0_INT_FRAME here */
- pushl_cfi %eax
- SAVE_ALL
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_nmi
- jmp restore_all_notrace
- CFI_ENDPROC
-
-nmi_stack_fixup:
- RING0_INT_FRAME
- FIX_STACK 12, nmi_stack_correct, 1
- jmp nmi_stack_correct
-
-nmi_debug_stack_check:
- /* We have a RING0_INT_FRAME here */
- cmpw $__KERNEL_CS,16(%esp)
- jne nmi_stack_correct
- cmpl $debug,(%esp)
- jb nmi_stack_correct
- cmpl $debug_esp_fix_insn,(%esp)
- ja nmi_stack_correct
- FIX_STACK 24, nmi_stack_correct, 1
- jmp nmi_stack_correct
-
-#ifdef CONFIG_X86_ESPFIX32
-nmi_espfix_stack:
- /* We have a RING0_INT_FRAME here.
- *
- * create the pointer to lss back
- */
- pushl_cfi %ss
- pushl_cfi %esp
- addl $4, (%esp)
- /* copy the iret frame of 12 bytes */
- .rept 3
- pushl_cfi 16(%esp)
- .endr
- pushl_cfi %eax
- SAVE_ALL
- FIXUP_ESPFIX_STACK # %eax == %esp
- xorl %edx,%edx # zero error code
- call do_nmi
- RESTORE_REGS
- lss 12+4(%esp), %esp # back to espfix stack
- CFI_ADJUST_CFA_OFFSET -24
- jmp irq_return
-#endif
- CFI_ENDPROC
-END(nmi)
-
-ENTRY(int3)
- RING0_INT_FRAME
- ASM_CLAC
- pushl_cfi $-1 # mark this as an int
- SAVE_ALL
- TRACE_IRQS_OFF
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_int3
- jmp ret_from_exception
- CFI_ENDPROC
-END(int3)
-
-ENTRY(general_protection)
- RING0_EC_FRAME
- pushl_cfi $do_general_protection
- jmp error_code
- CFI_ENDPROC
-END(general_protection)
-
-#ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
- RING0_EC_FRAME
- ASM_CLAC
- pushl_cfi $do_async_page_fault
- jmp error_code
- CFI_ENDPROC
-END(async_page_fault)
-#endif
-
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
deleted file mode 100644
index 02c2eff..0000000
--- a/arch/x86/kernel/entry_64.S
+++ /dev/null
@@ -1,1653 +0,0 @@
-/*
- * linux/arch/x86_64/entry.S
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
- * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- *
- * Some of this is documented in Documentation/x86/entry_64.txt
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after an interrupt and after each system call.
- *
- * A note on terminology:
- * - iret frame: Architecture defined interrupt frame from SS to RIP
- * at the top of the kernel process stack.
- *
- * Some macro usage:
- * - CFI macros are used to generate dwarf2 unwind information for better
- * backtraces. They don't change any code.
- * - ENTRY/END Define functions in the symbol table.
- * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
- * - idtentry - Define exception entry points.
- */
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/msr.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/hw_irq.h>
-#include <asm/page_types.h>
-#include <asm/irqflags.h>
-#include <asm/paravirt.h>
-#include <asm/percpu.h>
-#include <asm/asm.h>
-#include <asm/context_tracking.h>
-#include <asm/smap.h>
-#include <asm/pgtable_types.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE 0x40000000
-
- .code64
- .section .entry.text, "ax"
-
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
- swapgs
- sysretq
-ENDPROC(native_usergs_sysret64)
-#endif /* CONFIG_PARAVIRT */
-
-
-.macro TRACE_IRQS_IRETQ
-#ifdef CONFIG_TRACE_IRQFLAGS
- bt $9,EFLAGS(%rsp) /* interrupts off? */
- jnc 1f
- TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * When dynamic function tracer is enabled it will add a breakpoint
- * to all locations that it is about to modify, sync CPUs, update
- * all the code, sync CPUs, then remove the breakpoints. In this time
- * if lockdep is enabled, it might jump back into the debug handler
- * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
- *
- * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
- * make sure the stack pointer does not get reset back to the top
- * of the debug stack, and instead just reuses the current stack.
- */
-#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
-
-.macro TRACE_IRQS_OFF_DEBUG
- call debug_stack_set_zero
- TRACE_IRQS_OFF
- call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_ON_DEBUG
- call debug_stack_set_zero
- TRACE_IRQS_ON
- call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_IRETQ_DEBUG
- bt $9,EFLAGS(%rsp) /* interrupts off? */
- jnc 1f
- TRACE_IRQS_ON_DEBUG
-1:
-.endm
-
-#else
-# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF
-# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON
-# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ
-#endif
-
-/*
- * empty frame
- */
- .macro EMPTY_FRAME start=1 offset=0
- .if \start
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,8+\offset
- .else
- CFI_DEF_CFA_OFFSET 8+\offset
- .endif
- .endm
-
-/*
- * initial frame state for interrupts (and exceptions without error code)
- */
- .macro INTR_FRAME start=1 offset=0
- EMPTY_FRAME \start, 5*8+\offset
- /*CFI_REL_OFFSET ss, 4*8+\offset*/
- CFI_REL_OFFSET rsp, 3*8+\offset
- /*CFI_REL_OFFSET rflags, 2*8+\offset*/
- /*CFI_REL_OFFSET cs, 1*8+\offset*/
- CFI_REL_OFFSET rip, 0*8+\offset
- .endm
-
-/*
- * initial frame state for exceptions with error code (and interrupts
- * with vector already pushed)
- */
- .macro XCPT_FRAME start=1 offset=0
- INTR_FRAME \start, 1*8+\offset
- .endm
-
-/*
- * frame that enables passing a complete pt_regs to a C function.
- */
- .macro DEFAULT_FRAME start=1 offset=0
- XCPT_FRAME \start, ORIG_RAX+\offset
- CFI_REL_OFFSET rdi, RDI+\offset
- CFI_REL_OFFSET rsi, RSI+\offset
- CFI_REL_OFFSET rdx, RDX+\offset
- CFI_REL_OFFSET rcx, RCX+\offset
- CFI_REL_OFFSET rax, RAX+\offset
- CFI_REL_OFFSET r8, R8+\offset
- CFI_REL_OFFSET r9, R9+\offset
- CFI_REL_OFFSET r10, R10+\offset
- CFI_REL_OFFSET r11, R11+\offset
- CFI_REL_OFFSET rbx, RBX+\offset
- CFI_REL_OFFSET rbp, RBP+\offset
- CFI_REL_OFFSET r12, R12+\offset
- CFI_REL_OFFSET r13, R13+\offset
- CFI_REL_OFFSET r14, R14+\offset
- CFI_REL_OFFSET r15, R15+\offset
- .endm
-
-/*
- * 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
- *
- * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Registers on entry:
- * rax system call number
- * rcx return address
- * r11 saved rflags (note: r11 is callee-clobbered register in C ABI)
- * rdi arg0
- * rsi arg1
- * rdx arg2
- * r10 arg3 (needs to be moved to rcx to conform to C ABI)
- * r8 arg4
- * r9 arg5
- * (note: r12-r15,rbp,rbx are callee-preserved in C ABI)
- *
- * Only called from user space.
- *
- * When user can change pt_regs->foo always force IRET. That is because
- * it deals with uncanonical addresses better. SYSRET has trouble
- * with them due to bugs in both AMD and Intel CPUs.
- */
-
-ENTRY(system_call)
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rip,rcx
- /*CFI_REGISTER rflags,r11*/
-
- /*
- * Interrupts are off on entry.
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- SWAPGS_UNSAFE_STACK
- /*
- * A hypervisor implementation might want to use a label
- * after the swapgs, so that it can do the swapgs
- * for the guest and jump here on syscall.
- */
-GLOBAL(system_call_after_swapgs)
-
- movq %rsp,PER_CPU_VAR(rsp_scratch)
- movq PER_CPU_VAR(kernel_stack),%rsp
-
- /* Construct struct pt_regs on stack */
- pushq_cfi $__USER_DS /* pt_regs->ss */
- pushq_cfi PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
- /*
- * Re-enable interrupts.
- * We use 'rsp_scratch' as a scratch space, hence irq-off block above
- * must execute atomically in the face of possible interrupt-driven
- * task preemption. We must enable interrupts only after we're done
- * with using rsp_scratch:
- */
- ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %r11 /* pt_regs->flags */
- pushq_cfi $__USER_CS /* pt_regs->cs */
- pushq_cfi %rcx /* pt_regs->ip */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi $-ENOSYS /* pt_regs->ax */
- pushq_cfi_reg r8 /* pt_regs->r8 */
- pushq_cfi_reg r9 /* pt_regs->r9 */
- pushq_cfi_reg r10 /* pt_regs->r10 */
- pushq_cfi_reg r11 /* pt_regs->r11 */
- sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 6*8
-
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz tracesys
-system_call_fastpath:
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max,%rax
-#else
- andl $__SYSCALL_MASK,%eax
- cmpl $__NR_syscall_max,%eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10,%rcx
- call *sys_call_table(,%rax,8)
- movq %rax,RAX(%rsp)
-1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
- LOCKDEP_SYS_EXIT
- /*
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- DISABLE_INTERRUPTS(CLBR_NONE)
-
- /*
- * We must check ti flags with interrupts (or at least preemption)
- * off because we must *never* return to userspace without
- * processing exit work that is enqueued if we're preempted here.
- * In particular, returning to userspace with any of the one-shot
- * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
- * very bad.
- */
- testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
-
- CFI_REMEMBER_STATE
-
- RESTORE_C_REGS_EXCEPT_RCX_R11
- movq RIP(%rsp),%rcx
- CFI_REGISTER rip,rcx
- movq EFLAGS(%rsp),%r11
- /*CFI_REGISTER rflags,r11*/
- movq RSP(%rsp),%rsp
- /*
- * 64bit SYSRET restores rip from rcx,
- * rflags from r11 (but RF and VM bits are forced to 0),
- * cs and ss are loaded from MSRs.
- * Restoration of rflags re-enables interrupts.
- *
- * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
- * descriptor is not reinitialized. This means that we should
- * avoid SYSRET with SS == NULL, which could happen if we schedule,
- * exit the kernel, and re-enter using an interrupt vector. (All
- * interrupt entries on x86_64 set SS to NULL.) We prevent that
- * from happening by reloading SS in __switch_to. (Actually
- * detecting the failure in 64-bit userspace is tricky but can be
- * done.)
- */
- USERGS_SYSRET64
-
- CFI_RESTORE_STATE
-
- /* Do syscall entry tracing */
-tracesys:
- movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- call syscall_trace_enter_phase1
- test %rax, %rax
- jnz tracesys_phase2 /* if needed, run the slow path */
- RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
- movq ORIG_RAX(%rsp), %rax
- jmp system_call_fastpath /* and return to the fast path */
-
-tracesys_phase2:
- SAVE_EXTRA_REGS
- movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- movq %rax,%rdx
- call syscall_trace_enter_phase2
-
- /*
- * Reload registers from stack in case ptrace changed them.
- * We don't reload %rax because syscall_trace_entry_phase2() returned
- * the value it wants us to use in the table lookup.
- */
- RESTORE_C_REGS_EXCEPT_RAX
- RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max,%rax
-#else
- andl $__SYSCALL_MASK,%eax
- cmpl $__NR_syscall_max,%eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10,%rcx /* fixup for C */
- call *sys_call_table(,%rax,8)
- movq %rax,RAX(%rsp)
-1:
- /* Use IRET because user could have changed pt_regs->foo */
-
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
- DISABLE_INTERRUPTS(CLBR_NONE)
-int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
- TRACE_IRQS_OFF
- movl $_TIF_ALLWORK_MASK,%edi
- /* edi: mask to check */
-GLOBAL(int_with_check)
- LOCKDEP_SYS_EXIT_IRQ
- GET_THREAD_INFO(%rcx)
- movl TI_flags(%rcx),%edx
- andl %edi,%edx
- jnz int_careful
- andl $~TS_COMPAT,TI_status(%rcx)
- jmp syscall_return
-
- /* Either reschedule or signal or syscall exit tracking needed. */
- /* First do a reschedule test. */
- /* edx: work, edi: workmask */
-int_careful:
- bt $TIF_NEED_RESCHED,%edx
- jnc int_very_careful
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %rdi
- SCHEDULE_USER
- popq_cfi %rdi
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- jmp int_with_check
-
- /* handle signals and tracing -- both require a full pt_regs */
-int_very_careful:
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- SAVE_EXTRA_REGS
- /* Check for syscall exit trace */
- testl $_TIF_WORK_SYSCALL_EXIT,%edx
- jz int_signal
- pushq_cfi %rdi
- leaq 8(%rsp),%rdi # &ptregs -> arg1
- call syscall_trace_leave
- popq_cfi %rdi
- andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
- jmp int_restore_rest
-
-int_signal:
- testl $_TIF_DO_NOTIFY_MASK,%edx
- jz 1f
- movq %rsp,%rdi # &ptregs -> arg1
- xorl %esi,%esi # oldset -> arg2
- call do_notify_resume
-1: movl $_TIF_WORK_MASK,%edi
-int_restore_rest:
- RESTORE_EXTRA_REGS
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- jmp int_with_check
-
-syscall_return:
- /* The IRETQ could re-enable interrupts: */
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_IRETQ
-
- /*
- * Try to use SYSRET instead of IRET if we're returning to
- * a completely clean 64-bit userspace context.
- */
- movq RCX(%rsp),%rcx
- cmpq %rcx,RIP(%rsp) /* RCX == RIP */
- jne opportunistic_sysret_failed
-
- /*
- * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
- * in kernel space. This essentially lets the user take over
- * the kernel, since userspace controls RSP. It's not worth
- * testing for canonicalness exactly -- this check detects any
- * of the 17 high bits set, which is true for non-canonical
- * or kernel addresses. (This will pessimize vsyscall=native.
- * Big deal.)
- *
- * If virtual addresses ever become wider, this will need
- * to be updated to remain correct on both old and new CPUs.
- */
- .ifne __VIRTUAL_MASK_SHIFT - 47
- .error "virtual address width changed -- SYSRET checks need update"
- .endif
- shr $__VIRTUAL_MASK_SHIFT, %rcx
- jnz opportunistic_sysret_failed
-
- cmpq $__USER_CS,CS(%rsp) /* CS must match SYSRET */
- jne opportunistic_sysret_failed
-
- movq R11(%rsp),%r11
- cmpq %r11,EFLAGS(%rsp) /* R11 == RFLAGS */
- jne opportunistic_sysret_failed
-
- /*
- * SYSRET can't restore RF. SYSRET can restore TF, but unlike IRET,
- * restoring TF results in a trap from userspace immediately after
- * SYSRET. This would cause an infinite loop whenever #DB happens
- * with register state that satisfies the opportunistic SYSRET
- * conditions. For example, single-stepping this user code:
- *
- * movq $stuck_here,%rcx
- * pushfq
- * popq %r11
- * stuck_here:
- *
- * would never get past 'stuck_here'.
- */
- testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
- jnz opportunistic_sysret_failed
-
- /* nothing to check for RSP */
-
- cmpq $__USER_DS,SS(%rsp) /* SS must match SYSRET */
- jne opportunistic_sysret_failed
-
- /*
- * We win! This label is here just for ease of understanding
- * perf profiles. Nothing jumps here.
- */
-syscall_return_via_sysret:
- CFI_REMEMBER_STATE
- /* r11 is already restored (see code above) */
- RESTORE_C_REGS_EXCEPT_R11
- movq RSP(%rsp),%rsp
- USERGS_SYSRET64
- CFI_RESTORE_STATE
-
-opportunistic_sysret_failed:
- SWAPGS
- jmp restore_c_regs_and_iret
- CFI_ENDPROC
-END(system_call)
-
-
- .macro FORK_LIKE func
-ENTRY(stub_\func)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8 /* offset 8: return address */
- SAVE_EXTRA_REGS 8
- jmp sys_\func
- CFI_ENDPROC
-END(stub_\func)
- .endm
-
- FORK_LIKE clone
- FORK_LIKE fork
- FORK_LIKE vfork
-
-ENTRY(stub_execve)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- call sys_execve
-return_from_execve:
- testl %eax, %eax
- jz 1f
- /* exec failed, can use fast SYSRET code path in this case */
- ret
-1:
- /* must use IRET code path (pt_regs->cs may have changed) */
- addq $8, %rsp
- CFI_ADJUST_CFA_OFFSET -8
- ZERO_EXTRA_REGS
- movq %rax,RAX(%rsp)
- jmp int_ret_from_sys_call
- CFI_ENDPROC
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
- .align 8
-GLOBAL(stub_execveat)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- call sys_execveat
- jmp return_from_execve
- CFI_ENDPROC
-END(stub_execveat)
-
-#ifdef CONFIG_X86_X32_ABI
- .align 8
-GLOBAL(stub_x32_execve)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- call compat_sys_execve
- jmp return_from_execve
- CFI_ENDPROC
-END(stub_x32_execve)
- .align 8
-GLOBAL(stub_x32_execveat)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- call compat_sys_execveat
- jmp return_from_execve
- CFI_ENDPROC
-END(stub_x32_execveat)
-#endif
-
-#ifdef CONFIG_IA32_EMULATION
- .align 8
-GLOBAL(stub32_execve)
- CFI_STARTPROC
- call compat_sys_execve
- jmp return_from_execve
- CFI_ENDPROC
-END(stub32_execve)
- .align 8
-GLOBAL(stub32_execveat)
- CFI_STARTPROC
- call compat_sys_execveat
- jmp return_from_execve
- CFI_ENDPROC
-END(stub32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- /*
- * SAVE_EXTRA_REGS result is not normally needed:
- * sigreturn overwrites all pt_regs->GPREGS.
- * But sigreturn can fail (!), and there is no easy way to detect that.
- * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
- * we SAVE_EXTRA_REGS here.
- */
- SAVE_EXTRA_REGS 8
- call sys_rt_sigreturn
-return_from_stub:
- addq $8, %rsp
- CFI_ADJUST_CFA_OFFSET -8
- RESTORE_EXTRA_REGS
- movq %rax,RAX(%rsp)
- jmp int_ret_from_sys_call
- CFI_ENDPROC
-END(stub_rt_sigreturn)
-
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
- SAVE_EXTRA_REGS 8
- call sys32_x32_rt_sigreturn
- jmp return_from_stub
- CFI_ENDPROC
-END(stub_x32_rt_sigreturn)
-#endif
-
-/*
- * A newly forked process directly context switches into this address.
- *
- * rdi: prev task we switched from
- */
-ENTRY(ret_from_fork)
- DEFAULT_FRAME
-
- LOCK ; btr $TIF_FORK,TI_flags(%r8)
-
- pushq_cfi $0x0002
- popfq_cfi # reset kernel eflags
-
- call schedule_tail # rdi: 'prev' task parameter
-
- RESTORE_EXTRA_REGS
-
- testl $3,CS(%rsp) # from kernel_thread?
-
- /*
- * By the time we get here, we have no idea whether our pt_regs,
- * ti flags, and ti status came from the 64-bit SYSCALL fast path,
- * the slow path, or one of the ia32entry paths.
- * Use IRET code path to return, since it can safely handle
- * all of the above.
- */
- jnz int_ret_from_sys_call
-
- /* We came from kernel_thread */
- /* nb: we depend on RESTORE_EXTRA_REGS above */
- movq %rbp, %rdi
- call *%rbx
- movl $0, RAX(%rsp)
- RESTORE_EXTRA_REGS
- jmp int_ret_from_sys_call
- CFI_ENDPROC
-END(ret_from_fork)
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
- .align 8
-ENTRY(irq_entries_start)
- INTR_FRAME
- vector=FIRST_EXTERNAL_VECTOR
- .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
- pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */
- vector=vector+1
- jmp common_interrupt
- CFI_ADJUST_CFA_OFFSET -8
- .align 8
- .endr
- CFI_ENDPROC
-END(irq_entries_start)
-
-/*
- * Interrupt entry/exit.
- *
- * Interrupt entry points save only callee clobbered registers in fast path.
- *
- * Entry runs with interrupts off.
- */
-
-/* 0(%rsp): ~(interrupt number) */
- .macro interrupt func
- cld
- /*
- * Since nothing in interrupt handling code touches r12...r15 members
- * of "struct pt_regs", and since interrupts can nest, we can save
- * four stack slots and simultaneously provide
- * an unwind-friendly stack layout by saving "truncated" pt_regs
- * exactly up to rbp slot, without these members.
- */
- ALLOC_PT_GPREGS_ON_STACK -RBP
- SAVE_C_REGS -RBP
- /* this goes to 0(%rsp) for unwinder, not for saving the value: */
- SAVE_EXTRA_REGS_RBP -RBP
-
- leaq -RBP(%rsp),%rdi /* arg1 for \func (pointer to pt_regs) */
-
- testl $3, CS-RBP(%rsp)
- je 1f
- SWAPGS
-1:
- /*
- * Save previous stack pointer, optionally switch to interrupt stack.
- * irq_count is used to check if a CPU is already on an interrupt stack
- * or not. While this is essentially redundant with preempt_count it is
- * a little cheaper to use a separate counter in the PDA (short of
- * moving irq_enter into assembly, which would be too much work)
- */
- movq %rsp, %rsi
- incl PER_CPU_VAR(irq_count)
- cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
- CFI_DEF_CFA_REGISTER rsi
- pushq %rsi
- /*
- * For debugger:
- * "CFA (Current Frame Address) is the value on stack + offset"
- */
- CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \
- 0x77 /* DW_OP_breg7 (rsp) */, 0, \
- 0x06 /* DW_OP_deref */, \
- 0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \
- 0x22 /* DW_OP_plus */
- /* We entered an interrupt context - irqs are off: */
- TRACE_IRQS_OFF
-
- call \func
- .endm
-
- /*
- * The interrupt stubs push (~vector+0x80) onto the stack and
- * then jump to common_interrupt.
- */
- .p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
- XCPT_FRAME
- ASM_CLAC
- addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
- interrupt do_IRQ
- /* 0(%rsp): old RSP */
-ret_from_intr:
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- decl PER_CPU_VAR(irq_count)
-
- /* Restore saved previous stack */
- popq %rsi
- CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */
- /* return code expects complete pt_regs - adjust rsp accordingly: */
- leaq -RBP(%rsi),%rsp
- CFI_DEF_CFA_REGISTER rsp
- CFI_ADJUST_CFA_OFFSET RBP
-
- testl $3,CS(%rsp)
- je retint_kernel
- /* Interrupt came from user space */
-
- GET_THREAD_INFO(%rcx)
- /*
- * %rcx: thread info. Interrupts off.
- */
-retint_with_reschedule:
- movl $_TIF_WORK_MASK,%edi
-retint_check:
- LOCKDEP_SYS_EXIT_IRQ
- movl TI_flags(%rcx),%edx
- andl %edi,%edx
- CFI_REMEMBER_STATE
- jnz retint_careful
-
-retint_swapgs: /* return to user-space */
- /*
- * The iretq could re-enable interrupts:
- */
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_IRETQ
-
- SWAPGS
- jmp restore_c_regs_and_iret
-
-/* Returning to kernel space */
-retint_kernel:
-#ifdef CONFIG_PREEMPT
- /* Interrupts are off */
- /* Check if we need preemption */
- bt $9,EFLAGS(%rsp) /* interrupts were off? */
- jnc 1f
-0: cmpl $0,PER_CPU_VAR(__preempt_count)
- jnz 1f
- call preempt_schedule_irq
- jmp 0b
-1:
-#endif
- /*
- * The iretq could re-enable interrupts:
- */
- TRACE_IRQS_IRETQ
-
-/*
- * At this label, code paths which return to kernel and to user,
- * which come from interrupts/exception and from syscalls, merge.
- */
-restore_c_regs_and_iret:
- RESTORE_C_REGS
- REMOVE_PT_GPREGS_FROM_STACK 8
-
-irq_return:
- INTERRUPT_RETURN
-
-ENTRY(native_iret)
- /*
- * Are we returning to a stack segment from the LDT? Note: in
- * 64-bit mode SS:RSP on the exception stack is always valid.
- */
-#ifdef CONFIG_X86_ESPFIX64
- testb $4,(SS-RIP)(%rsp)
- jnz native_irq_return_ldt
-#endif
-
-.global native_irq_return_iret
-native_irq_return_iret:
- /*
- * This may fault. Non-paranoid faults on return to userspace are
- * handled by fixup_bad_iret. These include #SS, #GP, and #NP.
- * Double-faults due to espfix64 are handled in do_double_fault.
- * Other faults here are fatal.
- */
- iretq
-
-#ifdef CONFIG_X86_ESPFIX64
-native_irq_return_ldt:
- pushq_cfi %rax
- pushq_cfi %rdi
- SWAPGS
- movq PER_CPU_VAR(espfix_waddr),%rdi
- movq %rax,(0*8)(%rdi) /* RAX */
- movq (2*8)(%rsp),%rax /* RIP */
- movq %rax,(1*8)(%rdi)
- movq (3*8)(%rsp),%rax /* CS */
- movq %rax,(2*8)(%rdi)
- movq (4*8)(%rsp),%rax /* RFLAGS */
- movq %rax,(3*8)(%rdi)
- movq (6*8)(%rsp),%rax /* SS */
- movq %rax,(5*8)(%rdi)
- movq (5*8)(%rsp),%rax /* RSP */
- movq %rax,(4*8)(%rdi)
- andl $0xffff0000,%eax
- popq_cfi %rdi
- orq PER_CPU_VAR(espfix_stack),%rax
- SWAPGS
- movq %rax,%rsp
- popq_cfi %rax
- jmp native_irq_return_iret
-#endif
-
- /* edi: workmask, edx: work */
-retint_careful:
- CFI_RESTORE_STATE
- bt $TIF_NEED_RESCHED,%edx
- jnc retint_signal
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %rdi
- SCHEDULE_USER
- popq_cfi %rdi
- GET_THREAD_INFO(%rcx)
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- jmp retint_check
-
-retint_signal:
- testl $_TIF_DO_NOTIFY_MASK,%edx
- jz retint_swapgs
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
- SAVE_EXTRA_REGS
- movq $-1,ORIG_RAX(%rsp)
- xorl %esi,%esi # oldset
- movq %rsp,%rdi # &pt_regs
- call do_notify_resume
- RESTORE_EXTRA_REGS
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- GET_THREAD_INFO(%rcx)
- jmp retint_with_reschedule
-
- CFI_ENDPROC
-END(common_interrupt)
-
-/*
- * APIC interrupts.
- */
-.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
- INTR_FRAME
- ASM_CLAC
- pushq_cfi $~(\num)
-.Lcommon_\sym:
- interrupt \do_sym
- jmp ret_from_intr
- CFI_ENDPROC
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-#define trace(sym) trace_##sym
-#define smp_trace(sym) smp_trace_##sym
-
-.macro trace_apicinterrupt num sym
-apicinterrupt3 \num trace(\sym) smp_trace(\sym)
-.endm
-#else
-.macro trace_apicinterrupt num sym do_sym
-.endm
-#endif
-
-.macro apicinterrupt num sym do_sym
-apicinterrupt3 \num \sym \do_sym
-trace_apicinterrupt \num \sym
-.endm
-
-#ifdef CONFIG_SMP
-apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
- irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
-apicinterrupt3 REBOOT_VECTOR \
- reboot_interrupt smp_reboot_interrupt
-#endif
-
-#ifdef CONFIG_X86_UV
-apicinterrupt3 UV_BAU_MESSAGE \
- uv_bau_message_intr1 uv_bau_message_interrupt
-#endif
-apicinterrupt LOCAL_TIMER_VECTOR \
- apic_timer_interrupt smp_apic_timer_interrupt
-apicinterrupt X86_PLATFORM_IPI_VECTOR \
- x86_platform_ipi smp_x86_platform_ipi
-
-#ifdef CONFIG_HAVE_KVM
-apicinterrupt3 POSTED_INTR_VECTOR \
- kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
-#endif
-
-#ifdef CONFIG_X86_MCE_THRESHOLD
-apicinterrupt THRESHOLD_APIC_VECTOR \
- threshold_interrupt smp_threshold_interrupt
-#endif
-
-#ifdef CONFIG_X86_THERMAL_VECTOR
-apicinterrupt THERMAL_APIC_VECTOR \
- thermal_interrupt smp_thermal_interrupt
-#endif
-
-#ifdef CONFIG_SMP
-apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
- call_function_single_interrupt smp_call_function_single_interrupt
-apicinterrupt CALL_FUNCTION_VECTOR \
- call_function_interrupt smp_call_function_interrupt
-apicinterrupt RESCHEDULE_VECTOR \
- reschedule_interrupt smp_reschedule_interrupt
-#endif
-
-apicinterrupt ERROR_APIC_VECTOR \
- error_interrupt smp_error_interrupt
-apicinterrupt SPURIOUS_APIC_VECTOR \
- spurious_interrupt smp_spurious_interrupt
-
-#ifdef CONFIG_IRQ_WORK
-apicinterrupt IRQ_WORK_VECTOR \
- irq_work_interrupt smp_irq_work_interrupt
-#endif
-
-/*
- * Exception entry points.
- */
-#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
-
-.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
- /* Sanity check */
- .if \shift_ist != -1 && \paranoid == 0
- .error "using shift_ist requires paranoid=1"
- .endif
-
- .if \has_error_code
- XCPT_FRAME
- .else
- INTR_FRAME
- .endif
-
- ASM_CLAC
- PARAVIRT_ADJUST_EXCEPTION_FRAME
-
- .ifeq \has_error_code
- pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
- .endif
-
- ALLOC_PT_GPREGS_ON_STACK
-
- .if \paranoid
- .if \paranoid == 1
- CFI_REMEMBER_STATE
- testl $3, CS(%rsp) /* If coming from userspace, switch */
- jnz 1f /* stacks. */
- .endif
- call paranoid_entry
- .else
- call error_entry
- .endif
- /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
-
- DEFAULT_FRAME 0
-
- .if \paranoid
- .if \shift_ist != -1
- TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */
- .else
- TRACE_IRQS_OFF
- .endif
- .endif
-
- movq %rsp,%rdi /* pt_regs pointer */
-
- .if \has_error_code
- movq ORIG_RAX(%rsp),%rsi /* get error code */
- movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
- .else
- xorl %esi,%esi /* no error code */
- .endif
-
- .if \shift_ist != -1
- subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
- .endif
-
- call \do_sym
-
- .if \shift_ist != -1
- addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
- .endif
-
- /* these procedures expect "no swapgs" flag in ebx */
- .if \paranoid
- jmp paranoid_exit
- .else
- jmp error_exit
- .endif
-
- .if \paranoid == 1
- CFI_RESTORE_STATE
- /*
- * Paranoid entry from userspace. Switch stacks and treat it
- * as a normal entry. This means that paranoid handlers
- * run in real process context if user_mode(regs).
- */
-1:
- call error_entry
-
- DEFAULT_FRAME 0
-
- movq %rsp,%rdi /* pt_regs pointer */
- call sync_regs
- movq %rax,%rsp /* switch stack */
-
- movq %rsp,%rdi /* pt_regs pointer */
-
- .if \has_error_code
- movq ORIG_RAX(%rsp),%rsi /* get error code */
- movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
- .else
- xorl %esi,%esi /* no error code */
- .endif
-
- call \do_sym
-
- jmp error_exit /* %ebx: no swapgs flag */
- .endif
-
- CFI_ENDPROC
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#else
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#endif
-
-idtentry divide_error do_divide_error has_error_code=0
-idtentry overflow do_overflow has_error_code=0
-idtentry bounds do_bounds has_error_code=0
-idtentry invalid_op do_invalid_op has_error_code=0
-idtentry device_not_available do_device_not_available has_error_code=0
-idtentry double_fault do_double_fault has_error_code=1 paranoid=2
-idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
-idtentry invalid_TSS do_invalid_TSS has_error_code=1
-idtentry segment_not_present do_segment_not_present has_error_code=1
-idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
-idtentry coprocessor_error do_coprocessor_error has_error_code=0
-idtentry alignment_check do_alignment_check has_error_code=1
-idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
-
-
- /* Reload gs selector with exception handling */
- /* edi: new selector */
-ENTRY(native_load_gs_index)
- CFI_STARTPROC
- pushfq_cfi
- DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
- SWAPGS
-gs_change:
- movl %edi,%gs
-2: mfence /* workaround */
- SWAPGS
- popfq_cfi
- ret
- CFI_ENDPROC
-END(native_load_gs_index)
-
- _ASM_EXTABLE(gs_change,bad_gs)
- .section .fixup,"ax"
- /* running with kernelgs */
-bad_gs:
- SWAPGS /* switch back to user gs */
- xorl %eax,%eax
- movl %eax,%gs
- jmp 2b
- .previous
-
-/* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(do_softirq_own_stack)
- CFI_STARTPROC
- pushq_cfi %rbp
- CFI_REL_OFFSET rbp,0
- mov %rsp,%rbp
- CFI_DEF_CFA_REGISTER rbp
- incl PER_CPU_VAR(irq_count)
- cmove PER_CPU_VAR(irq_stack_ptr),%rsp
- push %rbp # backlink for old unwinder
- call __do_softirq
- leaveq
- CFI_RESTORE rbp
- CFI_DEF_CFA_REGISTER rsp
- CFI_ADJUST_CFA_OFFSET -8
- decl PER_CPU_VAR(irq_count)
- ret
- CFI_ENDPROC
-END(do_softirq_own_stack)
-
-#ifdef CONFIG_XEN
-idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
-
-/*
- * A note on the "critical region" in our callback handler.
- * We want to avoid stacking callback handlers due to events occurring
- * during handling of the last event. To do this, we keep events disabled
- * until we've done all processing. HOWEVER, we must enable events before
- * popping the stack frame (can't be done atomically) and so it would still
- * be possible to get enough handler activations to overflow the stack.
- * Although unlikely, bugs of that kind are hard to track down, so we'd
- * like to avoid the possibility.
- * So, on entry to the handler we detect whether we interrupted an
- * existing activation in its critical region -- if so, we pop the current
- * activation and restart the handler using the previous one.
- */
-ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
- CFI_STARTPROC
-/*
- * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
- * see the correct pointer to the pt_regs
- */
- movq %rdi, %rsp # we don't return, adjust the stack frame
- CFI_ENDPROC
- DEFAULT_FRAME
-11: incl PER_CPU_VAR(irq_count)
- movq %rsp,%rbp
- CFI_DEF_CFA_REGISTER rbp
- cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
- pushq %rbp # backlink for old unwinder
- call xen_evtchn_do_upcall
- popq %rsp
- CFI_DEF_CFA_REGISTER rsp
- decl PER_CPU_VAR(irq_count)
-#ifndef CONFIG_PREEMPT
- call xen_maybe_preempt_hcall
-#endif
- jmp error_exit
- CFI_ENDPROC
-END(xen_do_hypervisor_callback)
-
-/*
- * Hypervisor uses this for application faults while it executes.
- * We get here for two reasons:
- * 1. Fault while reloading DS, ES, FS or GS
- * 2. Fault while executing IRET
- * Category 1 we do not need to fix up as Xen has already reloaded all segment
- * registers that could be reloaded and zeroed the others.
- * Category 2 we fix up by killing the current process. We cannot use the
- * normal Linux return path in this case because if we use the IRET hypercall
- * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
- * We distinguish between categories by comparing each saved segment register
- * with its current contents: any discrepancy means we in category 1.
- */
-ENTRY(xen_failsafe_callback)
- INTR_FRAME 1 (6*8)
- /*CFI_REL_OFFSET gs,GS*/
- /*CFI_REL_OFFSET fs,FS*/
- /*CFI_REL_OFFSET es,ES*/
- /*CFI_REL_OFFSET ds,DS*/
- CFI_REL_OFFSET r11,8
- CFI_REL_OFFSET rcx,0
- movw %ds,%cx
- cmpw %cx,0x10(%rsp)
- CFI_REMEMBER_STATE
- jne 1f
- movw %es,%cx
- cmpw %cx,0x18(%rsp)
- jne 1f
- movw %fs,%cx
- cmpw %cx,0x20(%rsp)
- jne 1f
- movw %gs,%cx
- cmpw %cx,0x28(%rsp)
- jne 1f
- /* All segments match their saved values => Category 2 (Bad IRET). */
- movq (%rsp),%rcx
- CFI_RESTORE rcx
- movq 8(%rsp),%r11
- CFI_RESTORE r11
- addq $0x30,%rsp
- CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $0 /* RIP */
- pushq_cfi %r11
- pushq_cfi %rcx
- jmp general_protection
- CFI_RESTORE_STATE
-1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
- movq (%rsp),%rcx
- CFI_RESTORE rcx
- movq 8(%rsp),%r11
- CFI_RESTORE r11
- addq $0x30,%rsp
- CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $-1 /* orig_ax = -1 => not a system call */
- ALLOC_PT_GPREGS_ON_STACK
- SAVE_C_REGS
- SAVE_EXTRA_REGS
- jmp error_exit
- CFI_ENDPROC
-END(xen_failsafe_callback)
-
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
- xen_hvm_callback_vector xen_evtchn_do_upcall
-
-#endif /* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
- hyperv_callback_vector hyperv_vector_handler
-#endif /* CONFIG_HYPERV */
-
-idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry stack_segment do_stack_segment has_error_code=1
-#ifdef CONFIG_XEN
-idtentry xen_debug do_debug has_error_code=0
-idtentry xen_int3 do_int3 has_error_code=0
-idtentry xen_stack_segment do_stack_segment has_error_code=1
-#endif
-idtentry general_protection do_general_protection has_error_code=1
-trace_idtentry page_fault do_page_fault has_error_code=1
-#ifdef CONFIG_KVM_GUEST
-idtentry async_page_fault do_async_page_fault has_error_code=1
-#endif
-#ifdef CONFIG_X86_MCE
-idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
-#endif
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Use slow, but surefire "are we in kernel?" check.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(paranoid_entry)
- XCPT_FRAME 1 15*8
- cld
- SAVE_C_REGS 8
- SAVE_EXTRA_REGS 8
- movl $1,%ebx
- movl $MSR_GS_BASE,%ecx
- rdmsr
- testl %edx,%edx
- js 1f /* negative -> in kernel */
- SWAPGS
- xorl %ebx,%ebx
-1: ret
- CFI_ENDPROC
-END(paranoid_entry)
-
-/*
- * "Paranoid" exit path from exception stack. This is invoked
- * only on return from non-NMI IST interrupts that came
- * from kernel space.
- *
- * We may be returning to very strange contexts (e.g. very early
- * in syscall entry), so checking for preemption here would
- * be complicated. Fortunately, we there's no good reason
- * to try to handle preemption here.
- */
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(paranoid_exit)
- DEFAULT_FRAME
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF_DEBUG
- testl %ebx,%ebx /* swapgs needed? */
- jnz paranoid_exit_no_swapgs
- TRACE_IRQS_IRETQ
- SWAPGS_UNSAFE_STACK
- jmp paranoid_exit_restore
-paranoid_exit_no_swapgs:
- TRACE_IRQS_IRETQ_DEBUG
-paranoid_exit_restore:
- RESTORE_EXTRA_REGS
- RESTORE_C_REGS
- REMOVE_PT_GPREGS_FROM_STACK 8
- INTERRUPT_RETURN
- CFI_ENDPROC
-END(paranoid_exit)
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(error_entry)
- XCPT_FRAME 1 15*8
- cld
- SAVE_C_REGS 8
- SAVE_EXTRA_REGS 8
- xorl %ebx,%ebx
- testl $3,CS+8(%rsp)
- je error_kernelspace
-error_swapgs:
- SWAPGS
-error_sti:
- TRACE_IRQS_OFF
- ret
-
- /*
- * There are two places in the kernel that can potentially fault with
- * usergs. Handle them here. B stepping K8s sometimes report a
- * truncated RIP for IRET exceptions returning to compat mode. Check
- * for these here too.
- */
-error_kernelspace:
- CFI_REL_OFFSET rcx, RCX+8
- incl %ebx
- leaq native_irq_return_iret(%rip),%rcx
- cmpq %rcx,RIP+8(%rsp)
- je error_bad_iret
- movl %ecx,%eax /* zero extend */
- cmpq %rax,RIP+8(%rsp)
- je bstep_iret
- cmpq $gs_change,RIP+8(%rsp)
- je error_swapgs
- jmp error_sti
-
-bstep_iret:
- /* Fix truncated RIP */
- movq %rcx,RIP+8(%rsp)
- /* fall through */
-
-error_bad_iret:
- SWAPGS
- mov %rsp,%rdi
- call fixup_bad_iret
- mov %rax,%rsp
- decl %ebx /* Return to usergs */
- jmp error_sti
- CFI_ENDPROC
-END(error_entry)
-
-
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(error_exit)
- DEFAULT_FRAME
- movl %ebx,%eax
- RESTORE_EXTRA_REGS
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- GET_THREAD_INFO(%rcx)
- testl %eax,%eax
- jne retint_kernel
- LOCKDEP_SYS_EXIT_IRQ
- movl TI_flags(%rcx),%edx
- movl $_TIF_WORK_MASK,%edi
- andl %edi,%edx
- jnz retint_careful
- jmp retint_swapgs
- CFI_ENDPROC
-END(error_exit)
-
-/* Runs on exception stack */
-ENTRY(nmi)
- INTR_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- /*
- * We allow breakpoints in NMIs. If a breakpoint occurs, then
- * the iretq it performs will take us out of NMI context.
- * This means that we can have nested NMIs where the next
- * NMI is using the top of the stack of the previous NMI. We
- * can't let it execute because the nested NMI will corrupt the
- * stack of the previous NMI. NMI handlers are not re-entrant
- * anyway.
- *
- * To handle this case we do the following:
- * Check the a special location on the stack that contains
- * a variable that is set when NMIs are executing.
- * The interrupted task's stack is also checked to see if it
- * is an NMI stack.
- * If the variable is not set and the stack is not the NMI
- * stack then:
- * o Set the special variable on the stack
- * o Copy the interrupt frame into a "saved" location on the stack
- * o Copy the interrupt frame into a "copy" location on the stack
- * o Continue processing the NMI
- * If the variable is set or the previous stack is the NMI stack:
- * o Modify the "copy" location to jump to the repeate_nmi
- * o return back to the first NMI
- *
- * Now on exit of the first NMI, we first clear the stack variable
- * The NMI stack will tell any nested NMIs at that point that it is
- * nested. Then we pop the stack normally with iret, and if there was
- * a nested NMI that updated the copy interrupt stack frame, a
- * jump will be made to the repeat_nmi code that will handle the second
- * NMI.
- */
-
- /* Use %rdx as our temp variable throughout */
- pushq_cfi %rdx
- CFI_REL_OFFSET rdx, 0
-
- /*
- * If %cs was not the kernel segment, then the NMI triggered in user
- * space, which means it is definitely not nested.
- */
- cmpl $__KERNEL_CS, 16(%rsp)
- jne first_nmi
-
- /*
- * Check the special variable on the stack to see if NMIs are
- * executing.
- */
- cmpl $1, -8(%rsp)
- je nested_nmi
-
- /*
- * Now test if the previous stack was an NMI stack.
- * We need the double check. We check the NMI stack to satisfy the
- * race when the first NMI clears the variable before returning.
- * We check the variable because the first NMI could be in a
- * breakpoint routine using a breakpoint stack.
- */
- lea 6*8(%rsp), %rdx
- /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
- cmpq %rdx, 4*8(%rsp)
- /* If the stack pointer is above the NMI stack, this is a normal NMI */
- ja first_nmi
- subq $EXCEPTION_STKSZ, %rdx
- cmpq %rdx, 4*8(%rsp)
- /* If it is below the NMI stack, it is a normal NMI */
- jb first_nmi
- /* Ah, it is within the NMI stack, treat it as nested */
-
- CFI_REMEMBER_STATE
-
-nested_nmi:
- /*
- * Do nothing if we interrupted the fixup in repeat_nmi.
- * It's about to repeat the NMI handler, so we are fine
- * with ignoring this one.
- */
- movq $repeat_nmi, %rdx
- cmpq 8(%rsp), %rdx
- ja 1f
- movq $end_repeat_nmi, %rdx
- cmpq 8(%rsp), %rdx
- ja nested_nmi_out
-
-1:
- /* Set up the interrupted NMIs stack to jump to repeat_nmi */
- leaq -1*8(%rsp), %rdx
- movq %rdx, %rsp
- CFI_ADJUST_CFA_OFFSET 1*8
- leaq -10*8(%rsp), %rdx
- pushq_cfi $__KERNEL_DS
- pushq_cfi %rdx
- pushfq_cfi
- pushq_cfi $__KERNEL_CS
- pushq_cfi $repeat_nmi
-
- /* Put stack back */
- addq $(6*8), %rsp
- CFI_ADJUST_CFA_OFFSET -6*8
-
-nested_nmi_out:
- popq_cfi %rdx
- CFI_RESTORE rdx
-
- /* No need to check faults here */
- INTERRUPT_RETURN
-
- CFI_RESTORE_STATE
-first_nmi:
- /*
- * Because nested NMIs will use the pushed location that we
- * stored in rdx, we must keep that space available.
- * Here's what our stack frame will look like:
- * +-------------------------+
- * | original SS |
- * | original Return RSP |
- * | original RFLAGS |
- * | original CS |
- * | original RIP |
- * +-------------------------+
- * | temp storage for rdx |
- * +-------------------------+
- * | NMI executing variable |
- * +-------------------------+
- * | copied SS |
- * | copied Return RSP |
- * | copied RFLAGS |
- * | copied CS |
- * | copied RIP |
- * +-------------------------+
- * | Saved SS |
- * | Saved Return RSP |
- * | Saved RFLAGS |
- * | Saved CS |
- * | Saved RIP |
- * +-------------------------+
- * | pt_regs |
- * +-------------------------+
- *
- * The saved stack frame is used to fix up the copied stack frame
- * that a nested NMI may change to make the interrupted NMI iret jump
- * to the repeat_nmi. The original stack frame and the temp storage
- * is also used by nested NMIs and can not be trusted on exit.
- */
- /* Do not pop rdx, nested NMIs will corrupt that part of the stack */
- movq (%rsp), %rdx
- CFI_RESTORE rdx
-
- /* Set the NMI executing variable on the stack. */
- pushq_cfi $1
-
- /*
- * Leave room for the "copied" frame
- */
- subq $(5*8), %rsp
- CFI_ADJUST_CFA_OFFSET 5*8
-
- /* Copy the stack frame to the Saved frame */
- .rept 5
- pushq_cfi 11*8(%rsp)
- .endr
- CFI_DEF_CFA_OFFSET 5*8
-
- /* Everything up to here is safe from nested NMIs */
-
- /*
- * If there was a nested NMI, the first NMI's iret will return
- * here. But NMIs are still enabled and we can take another
- * nested NMI. The nested NMI checks the interrupted RIP to see
- * if it is between repeat_nmi and end_repeat_nmi, and if so
- * it will just return, as we are about to repeat an NMI anyway.
- * This makes it safe to copy to the stack frame that a nested
- * NMI will update.
- */
-repeat_nmi:
- /*
- * Update the stack variable to say we are still in NMI (the update
- * is benign for the non-repeat case, where 1 was pushed just above
- * to this very stack slot).
- */
- movq $1, 10*8(%rsp)
-
- /* Make another copy, this one may be modified by nested NMIs */
- addq $(10*8), %rsp
- CFI_ADJUST_CFA_OFFSET -10*8
- .rept 5
- pushq_cfi -6*8(%rsp)
- .endr
- subq $(5*8), %rsp
- CFI_DEF_CFA_OFFSET 5*8
-end_repeat_nmi:
-
- /*
- * Everything below this point can be preempted by a nested
- * NMI if the first NMI took an exception and reset our iret stack
- * so that we repeat another NMI.
- */
- pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
- ALLOC_PT_GPREGS_ON_STACK
-
- /*
- * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
- * as we should not be calling schedule in NMI context.
- * Even with normal interrupts enabled. An NMI should not be
- * setting NEED_RESCHED or anything that normal interrupts and
- * exceptions might do.
- */
- call paranoid_entry
- DEFAULT_FRAME 0
-
- /*
- * Save off the CR2 register. If we take a page fault in the NMI then
- * it could corrupt the CR2 value. If the NMI preempts a page fault
- * handler before it was able to read the CR2 register, and then the
- * NMI itself takes a page fault, the page fault that was preempted
- * will read the information from the NMI page fault and not the
- * origin fault. Save it off and restore it if it changes.
- * Use the r12 callee-saved register.
- */
- movq %cr2, %r12
-
- /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
- movq %rsp,%rdi
- movq $-1,%rsi
- call do_nmi
-
- /* Did the NMI take a page fault? Restore cr2 if it did */
- movq %cr2, %rcx
- cmpq %rcx, %r12
- je 1f
- movq %r12, %cr2
-1:
-
- testl %ebx,%ebx /* swapgs needed? */
- jnz nmi_restore
-nmi_swapgs:
- SWAPGS_UNSAFE_STACK
-nmi_restore:
- RESTORE_EXTRA_REGS
- RESTORE_C_REGS
- /* Pop the extra iret frame at once */
- REMOVE_PT_GPREGS_FROM_STACK 6*8
-
- /* Clear the NMI executing stack variable */
- movq $0, 5*8(%rsp)
- jmp irq_return
- CFI_ENDPROC
-END(nmi)
-
-ENTRY(ignore_sysret)
- CFI_STARTPROC
- mov $-ENOSYS,%eax
- sysret
- CFI_ENDPROC
-END(ignore_sysret)
-
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 7e429c9..0e2d96f 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -557,7 +557,7 @@
cld
cmpl $2,(%esp) # X86_TRAP_NMI
- je is_nmi # Ignore NMI
+ je .Lis_nmi # Ignore NMI
cmpl $2,%ss:early_recursion_flag
je hlt_loop
@@ -610,7 +610,7 @@
pop %ecx
pop %eax
decl %ss:early_recursion_flag
-is_nmi:
+.Lis_nmi:
addl $8,%esp /* drop vector number and error code */
iret
ENDPROC(early_idt_handler_common)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index df7e780..e5c27f7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -346,7 +346,7 @@
cld
cmpl $2,(%rsp) # X86_TRAP_NMI
- je is_nmi # Ignore NMI
+ je .Lis_nmi # Ignore NMI
cmpl $2,early_recursion_flag(%rip)
jz 1f
@@ -411,7 +411,7 @@
popq %rcx
popq %rax
decl early_recursion_flag(%rip)
-is_nmi:
+.Lis_nmi:
addq $16,%rsp # drop vector number and error code
INTERRUPT_RETURN
ENDPROC(early_idt_handler_common)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3acbff4..10757d0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -12,6 +12,7 @@
#include <linux/pm.h>
#include <linux/io.h>
+#include <asm/irqdomain.h>
#include <asm/fixmap.h>
#include <asm/hpet.h>
#include <asm/time.h>
@@ -305,8 +306,6 @@
printk(KERN_DEBUG "hpet clockevent registered\n");
}
-static int hpet_setup_msi_irq(unsigned int irq);
-
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
@@ -357,7 +356,7 @@
hpet_enable_legacy_int();
} else {
struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
- hpet_setup_msi_irq(hdev->irq);
+ irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
disable_irq(hdev->irq);
irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
enable_irq(hdev->irq);
@@ -423,6 +422,7 @@
static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
static struct hpet_dev *hpet_devs;
+static struct irq_domain *hpet_domain;
void hpet_msi_unmask(struct irq_data *data)
{
@@ -473,31 +473,6 @@
return hpet_next_event(delta, evt, hdev->num);
}
-static int hpet_setup_msi_irq(unsigned int irq)
-{
- if (x86_msi.setup_hpet_msi(irq, hpet_blockid)) {
- irq_free_hwirq(irq);
- return -EINVAL;
- }
- return 0;
-}
-
-static int hpet_assign_irq(struct hpet_dev *dev)
-{
- unsigned int irq = irq_alloc_hwirq(-1);
-
- if (!irq)
- return -EINVAL;
-
- irq_set_handler_data(irq, dev);
-
- if (hpet_setup_msi_irq(irq))
- return -EINVAL;
-
- dev->irq = irq;
- return 0;
-}
-
static irqreturn_t hpet_interrupt_handler(int irq, void *data)
{
struct hpet_dev *dev = (struct hpet_dev *)data;
@@ -540,9 +515,6 @@
if (!(hdev->flags & HPET_DEV_VALID))
return;
- if (hpet_setup_msi_irq(hdev->irq))
- return;
-
hdev->cpu = cpu;
per_cpu(cpu_hpet_dev, cpu) = hdev;
evt->name = hdev->name;
@@ -574,7 +546,7 @@
unsigned int id;
unsigned int num_timers;
unsigned int num_timers_used = 0;
- int i;
+ int i, irq;
if (hpet_msi_disable)
return;
@@ -587,6 +559,10 @@
num_timers++; /* Value read out starts from 0 */
hpet_print_config();
+ hpet_domain = hpet_create_irq_domain(hpet_blockid);
+ if (!hpet_domain)
+ return;
+
hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
if (!hpet_devs)
return;
@@ -604,12 +580,14 @@
hdev->flags = 0;
if (cfg & HPET_TN_PERIODIC_CAP)
hdev->flags |= HPET_DEV_PERI_CAP;
+ sprintf(hdev->name, "hpet%d", i);
hdev->num = i;
- sprintf(hdev->name, "hpet%d", i);
- if (hpet_assign_irq(hdev))
+ irq = hpet_assign_irq(hpet_domain, hdev, hdev->num);
+ if (irq <= 0)
continue;
+ hdev->irq = irq;
hdev->flags |= HPET_DEV_FSB_CAP;
hdev->flags |= HPET_DEV_VALID;
num_timers_used++;
@@ -709,10 +687,6 @@
}
#else
-static int hpet_setup_msi_irq(unsigned int irq)
-{
- return 0;
-}
static void hpet_msi_capability_lookup(unsigned int start_timer)
{
return;
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index e7cc537..16cb827 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -329,8 +329,8 @@
*/
outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
- outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+ /* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */
+ outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR);
/* 8259A-1 (the master) has a slave on IR2 */
outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
@@ -342,8 +342,8 @@
outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
- outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+ /* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */
+ outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR);
/* 8259A-2 is a slave on master's IR2 */
outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
/* (slave's support for AEOI in flat mode is to be investigated) */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index e5952c2..88b36648 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -22,6 +22,12 @@
#define CREATE_TRACE_POINTS
#include <asm/trace/irq_vectors.h>
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+DEFINE_PER_CPU(struct pt_regs *, irq_regs);
+EXPORT_PER_CPU_SYMBOL(irq_regs);
+
atomic_t irq_err_count;
/* Function pointer for generic interrupt vector handling */
@@ -116,6 +122,12 @@
seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
seq_puts(p, " Threshold APIC interrupts\n");
#endif
+#ifdef CONFIG_X86_MCE_AMD
+ seq_printf(p, "%*s: ", prec, "DFR");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", irq_stats(j)->irq_deferred_error_count);
+ seq_puts(p, " Deferred Error APIC interrupts\n");
+#endif
#ifdef CONFIG_X86_MCE
seq_printf(p, "%*s: ", prec, "MCE");
for_each_online_cpu(j)
@@ -136,6 +148,18 @@
#if defined(CONFIG_X86_IO_APIC)
seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
#endif
+#ifdef CONFIG_HAVE_KVM
+ seq_printf(p, "%*s: ", prec, "PIN");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", irq_stats(j)->kvm_posted_intr_ipis);
+ seq_puts(p, " Posted-interrupt notification event\n");
+
+ seq_printf(p, "%*s: ", prec, "PIW");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ",
+ irq_stats(j)->kvm_posted_intr_wakeup_ipis);
+ seq_puts(p, " Posted-interrupt wakeup event\n");
+#endif
return 0;
}
@@ -192,8 +216,7 @@
unsigned vector = ~regs->orig_ax;
unsigned irq;
- irq_enter();
- exit_idle();
+ entering_irq();
irq = __this_cpu_read(vector_irq[vector]);
@@ -209,7 +232,7 @@
}
}
- irq_exit();
+ exiting_irq();
set_irq_regs(old_regs);
return 1;
@@ -237,6 +260,18 @@
}
#ifdef CONFIG_HAVE_KVM
+static void dummy_handler(void) {}
+static void (*kvm_posted_intr_wakeup_handler)(void) = dummy_handler;
+
+void kvm_set_posted_intr_wakeup_handler(void (*handler)(void))
+{
+ if (handler)
+ kvm_posted_intr_wakeup_handler = handler;
+ else
+ kvm_posted_intr_wakeup_handler = dummy_handler;
+}
+EXPORT_SYMBOL_GPL(kvm_set_posted_intr_wakeup_handler);
+
/*
* Handler for POSTED_INTERRUPT_VECTOR.
*/
@@ -244,16 +279,23 @@
{
struct pt_regs *old_regs = set_irq_regs(regs);
- ack_APIC_irq();
-
- irq_enter();
-
- exit_idle();
-
+ entering_ack_irq();
inc_irq_stat(kvm_posted_intr_ipis);
+ exiting_irq();
+ set_irq_regs(old_regs);
+}
- irq_exit();
+/*
+ * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR.
+ */
+__visible void smp_kvm_posted_intr_wakeup_ipi(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ entering_ack_irq();
+ inc_irq_stat(kvm_posted_intr_wakeup_ipis);
+ kvm_posted_intr_wakeup_handler();
+ exiting_irq();
set_irq_regs(old_regs);
}
#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index f9fd86a..cd74f59 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -21,12 +21,6 @@
#include <asm/apic.h>
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
-
-DEFINE_PER_CPU(struct pt_regs *, irq_regs);
-EXPORT_PER_CPU_SYMBOL(irq_regs);
-
#ifdef CONFIG_DEBUG_STACKOVERFLOW
int sysctl_panic_on_stackoverflow __read_mostly;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 394e643..bc4604e 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -20,12 +20,6 @@
#include <asm/idle.h>
#include <asm/apic.h>
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
-
-DEFINE_PER_CPU(struct pt_regs *, irq_regs);
-EXPORT_PER_CPU_SYMBOL(irq_regs);
-
int sysctl_panic_on_stackoverflow;
/*
diff --git a/arch/x86/kernel/irq_work.c b/arch/x86/kernel/irq_work.c
index 15d741d..dc5fa6a 100644
--- a/arch/x86/kernel/irq_work.c
+++ b/arch/x86/kernel/irq_work.c
@@ -10,12 +10,6 @@
#include <asm/apic.h>
#include <asm/trace/irq_vectors.h>
-static inline void irq_work_entering_irq(void)
-{
- irq_enter();
- ack_APIC_irq();
-}
-
static inline void __smp_irq_work_interrupt(void)
{
inc_irq_stat(apic_irq_work_irqs);
@@ -24,14 +18,14 @@
__visible void smp_irq_work_interrupt(struct pt_regs *regs)
{
- irq_work_entering_irq();
+ ipi_entering_ack_irq();
__smp_irq_work_interrupt();
exiting_irq();
}
__visible void smp_trace_irq_work_interrupt(struct pt_regs *regs)
{
- irq_work_entering_irq();
+ ipi_entering_ack_irq();
trace_irq_work_entry(IRQ_WORK_VECTOR);
__smp_irq_work_interrupt();
trace_irq_work_exit(IRQ_WORK_VECTOR);
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index cd10a64..a3a5e15 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -86,7 +86,7 @@
int i;
/*
- * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
+ * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15.
* If these IRQ's are handled by legacy interrupt-controllers like PIC,
* then this configuration will likely be static after the boot. If
* these IRQ's are handled by more mordern controllers like IO-APIC,
@@ -94,7 +94,7 @@
* irq's migrate etc.
*/
for (i = 0; i < nr_legacy_irqs(); i++)
- per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
+ per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = i;
x86_init.irqs.intr_init();
}
@@ -135,6 +135,10 @@
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
#endif
+#ifdef CONFIG_X86_MCE_AMD
+ alloc_intr_gate(DEFERRED_ERROR_VECTOR, deferred_error_interrupt);
+#endif
+
#ifdef CONFIG_X86_LOCAL_APIC
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
@@ -144,6 +148,8 @@
#ifdef CONFIG_HAVE_KVM
/* IPI for KVM to deliver posted interrupt */
alloc_intr_gate(POSTED_INTR_VECTOR, kvm_posted_intr_ipi);
+ /* IPI for KVM to deliver interrupt to wake up tasks */
+ alloc_intr_gate(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi);
#endif
/* IPI vectors for APIC spurious and error interrupts */
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 415480d..11546b4 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -17,6 +17,7 @@
#include <linux/ftrace.h>
#include <linux/io.h>
#include <linux/suspend.h>
+#include <linux/vmalloc.h>
#include <asm/init.h>
#include <asm/pgtable.h>
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 2d2a237..30ca760 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -19,8 +19,8 @@
#include <linux/module.h>
#include <linux/smp.h>
#include <linux/pci.h>
-#include <linux/irqdomain.h>
+#include <asm/irqdomain.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
@@ -113,11 +113,6 @@
pr_warn("Unknown bustype %s - ignoring\n", str);
}
-static struct irq_domain_ops mp_ioapic_irqdomain_ops = {
- .map = mp_irqdomain_map,
- .unmap = mp_irqdomain_unmap,
-};
-
static void __init MP_ioapic_info(struct mpc_ioapic *m)
{
struct ioapic_domain_cfg cfg = {
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index c614dd4..58bcfb6 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -154,7 +154,9 @@
ret = paravirt_patch_ident_64(insnbuf, len);
else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
+#ifdef CONFIG_X86_32
type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
+#endif
type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64))
/* If operation requires a jmp, then jmp */
@@ -371,7 +373,7 @@
.load_sp0 = native_load_sp0,
-#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
+#if defined(CONFIG_X86_32)
.irq_enable_sysexit = native_irq_enable_sysexit,
#endif
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index a1fa867..8aa0558 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -55,7 +55,6 @@
PATCH_SITE(pv_irq_ops, save_fl);
PATCH_SITE(pv_irq_ops, irq_enable);
PATCH_SITE(pv_irq_ops, irq_disable);
- PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
PATCH_SITE(pv_cpu_ops, usergs_sysret32);
PATCH_SITE(pv_cpu_ops, usergs_sysret64);
PATCH_SITE(pv_cpu_ops, swapgs);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index deff651..c09c99c 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -303,13 +303,10 @@
arch_end_context_switch(next_p);
/*
- * Reload esp0, kernel_stack, and current_top_of_stack. This changes
+ * Reload esp0 and cpu_current_top_of_stack. This changes
* current_thread_info().
*/
load_sp0(tss, next);
- this_cpu_write(kernel_stack,
- (unsigned long)task_stack_page(next_p) +
- THREAD_SIZE);
this_cpu_write(cpu_current_top_of_stack,
(unsigned long)task_stack_page(next_p) +
THREAD_SIZE);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c50e013..843f92e 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -410,9 +410,6 @@
/* Reload esp0 and ss1. This changes current_thread_info(). */
load_sp0(tss, next);
- this_cpu_write(kernel_stack,
- (unsigned long)task_stack_page(next_p) + THREAD_SIZE);
-
/*
* Now maybe reload the debug registers and handle I/O bitmaps
*/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cba8288..265a6fd 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1224,8 +1224,7 @@
init_cpu_to_node();
init_apic_mappings();
- if (x86_io_apic_ops.init)
- x86_io_apic_ops.init();
+ io_apic_init_mappings();
kvm_guest_init();
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index be8e1bd..15aaa69 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -170,8 +170,7 @@
asmlinkage __visible void smp_reboot_interrupt(void)
{
- ack_APIC_irq();
- irq_enter();
+ ipi_entering_ack_irq();
stop_this_cpu(NULL);
irq_exit();
}
@@ -265,12 +264,6 @@
*/
}
-static inline void smp_entering_irq(void)
-{
- ack_APIC_irq();
- irq_enter();
-}
-
__visible void smp_trace_reschedule_interrupt(struct pt_regs *regs)
{
/*
@@ -279,7 +272,7 @@
* scheduler_ipi(). This is OK, since those functions are allowed
* to nest.
*/
- smp_entering_irq();
+ ipi_entering_ack_irq();
trace_reschedule_entry(RESCHEDULE_VECTOR);
__smp_reschedule_interrupt();
trace_reschedule_exit(RESCHEDULE_VECTOR);
@@ -297,14 +290,14 @@
__visible void smp_call_function_interrupt(struct pt_regs *regs)
{
- smp_entering_irq();
+ ipi_entering_ack_irq();
__smp_call_function_interrupt();
exiting_irq();
}
__visible void smp_trace_call_function_interrupt(struct pt_regs *regs)
{
- smp_entering_irq();
+ ipi_entering_ack_irq();
trace_call_function_entry(CALL_FUNCTION_VECTOR);
__smp_call_function_interrupt();
trace_call_function_exit(CALL_FUNCTION_VECTOR);
@@ -319,14 +312,14 @@
__visible void smp_call_function_single_interrupt(struct pt_regs *regs)
{
- smp_entering_irq();
+ ipi_entering_ack_irq();
__smp_call_function_single_interrupt();
exiting_irq();
}
__visible void smp_trace_call_function_single_interrupt(struct pt_regs *regs)
{
- smp_entering_irq();
+ ipi_entering_ack_irq();
trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR);
__smp_call_function_single_interrupt();
trace_call_function_single_exit(CALL_FUNCTION_SINGLE_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6d4bfea..8add66b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -515,6 +515,40 @@
}
/*
+ * The Multiprocessor Specification 1.4 (1997) example code suggests
+ * that there should be a 10ms delay between the BSP asserting INIT
+ * and de-asserting INIT, when starting a remote processor.
+ * But that slows boot and resume on modern processors, which include
+ * many cores and don't require that delay.
+ *
+ * Cmdline "init_cpu_udelay=" is available to over-ride this delay.
+ * Modern processor families are quirked to remove the delay entirely.
+ */
+#define UDELAY_10MS_DEFAULT 10000
+
+static unsigned int init_udelay = UDELAY_10MS_DEFAULT;
+
+static int __init cpu_init_udelay(char *str)
+{
+ get_option(&str, &init_udelay);
+
+ return 0;
+}
+early_param("cpu_init_udelay", cpu_init_udelay);
+
+static void __init smp_quirk_init_udelay(void)
+{
+ /* if cmdline changed it from default, leave it alone */
+ if (init_udelay != UDELAY_10MS_DEFAULT)
+ return;
+
+ /* if modern processor, use no delay */
+ if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
+ ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
+ init_udelay = 0;
+}
+
+/*
* Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
@@ -556,7 +590,7 @@
static int
wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
{
- unsigned long send_status, accept_status = 0;
+ unsigned long send_status = 0, accept_status = 0;
int maxlvt, num_starts, j;
maxlvt = lapic_get_maxlvt();
@@ -584,7 +618,7 @@
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
- mdelay(10);
+ udelay(init_udelay);
pr_debug("Deasserting INIT\n");
@@ -652,6 +686,7 @@
* Give the other CPU some time to accept the IPI.
*/
udelay(200);
+
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
accept_status = (apic_read(APIC_ESR) & 0xEF);
@@ -793,8 +828,6 @@
clear_tsk_thread_flag(idle, TIF_FORK);
initial_gs = per_cpu_offset(cpu);
#endif
- per_cpu(kernel_stack, cpu) =
- (unsigned long)task_stack_page(idle) + THREAD_SIZE;
}
/*
@@ -1177,6 +1210,8 @@
uv_system_init();
set_mtrr_aps_delayed_init();
+
+ smp_quirk_init_udelay();
}
void arch_enable_nonboot_cpus_begin(void)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 36cb15b..f579192 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -73,8 +73,7 @@
#else
#include <asm/processor-flags.h>
#include <asm/setup.h>
-
-asmlinkage int system_call(void);
+#include <asm/proto.h>
#endif
/* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -769,18 +768,6 @@
do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
{
conditional_sti(regs);
-#if 0
- /* No need to warn about this any longer. */
- pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
-#endif
-}
-
-asmlinkage __visible void __attribute__((weak)) smp_thermal_interrupt(void)
-{
-}
-
-asmlinkage __visible void __attribute__((weak)) smp_threshold_interrupt(void)
-{
}
dotraplinkage void
@@ -906,13 +893,13 @@
set_bit(i, used_vectors);
#ifdef CONFIG_IA32_EMULATION
- set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+ set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif
#ifdef CONFIG_X86_32
- set_system_trap_gate(SYSCALL_VECTOR, &system_call);
- set_bit(SYSCALL_VECTOR, used_vectors);
+ set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
+ set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif
/*
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..3cee10a 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -111,11 +111,9 @@
#if defined(CONFIG_PCI_MSI)
struct x86_msi_ops x86_msi = {
.setup_msi_irqs = native_setup_msi_irqs,
- .compose_msi_msg = native_compose_msi_msg,
.teardown_msi_irq = native_teardown_msi_irq,
.teardown_msi_irqs = default_teardown_msi_irqs,
.restore_msi_irqs = default_restore_msi_irqs,
- .setup_hpet_msi = default_setup_hpet_msi,
};
/* MSI arch specific hooks */
@@ -141,13 +139,6 @@
#endif
struct x86_io_apic_ops x86_io_apic_ops = {
- .init = native_io_apic_init_mappings,
.read = native_io_apic_read,
- .write = native_io_apic_write,
- .modify = native_io_apic_modify,
.disable = native_disable_io_apic,
- .print_entries = native_io_apic_print_entries,
- .set_affinity = native_ioapic_set_affinity,
- .setup_entry = native_setup_ioapic_entry,
- .eoi_ioapic_pin = native_eoi_ioapic_pin,
};
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 27f8eea..f2dc08c 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -90,7 +90,7 @@
.noirq_iret = (u32)lguest_noirq_iret,
.kernel_address = PAGE_OFFSET,
.blocked_interrupts = { 1 }, /* Block timer interrupts */
- .syscall_vec = SYSCALL_VECTOR,
+ .syscall_vec = IA32_SYSCALL_VECTOR,
};
/*G:037
@@ -866,7 +866,7 @@
for (i = FIRST_EXTERNAL_VECTOR; i < FIRST_SYSTEM_VECTOR; i++) {
/* Some systems map "vectors" to interrupts weirdly. Not us! */
__this_cpu_write(vector_irq[i], i - FIRST_EXTERNAL_VECTOR);
- if (i != SYSCALL_VECTOR)
+ if (i != IA32_SYSCALL_VECTOR)
set_intr_gate(i, irq_entries_start +
8 * (i - FIRST_EXTERNAL_VECTOR));
}
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 1530afb..f258788 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -17,7 +17,6 @@
obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
lib-y := delay.o misc.o cmdline.o
-lib-y += thunk_$(BITS).o
lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
@@ -40,6 +39,6 @@
lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
lib-y += clear_page_64.o copy_page_64.o
lib-y += memmove_64.o memset_64.o
- lib-y += copy_user_64.o copy_user_nocache_64.o
+ lib-y += copy_user_64.o
lib-y += cmpxchg16b_emu.o
endif
diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index 00933d5..9b0ca8f 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -11,26 +11,23 @@
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
/* if you want SMP support, implement these with real spinlocks */
.macro LOCK reg
- pushfl_cfi
+ pushfl
cli
.endm
.macro UNLOCK reg
- popfl_cfi
+ popfl
.endm
#define BEGIN(op) \
.macro endp; \
- CFI_ENDPROC; \
ENDPROC(atomic64_##op##_386); \
.purgem endp; \
.endm; \
ENTRY(atomic64_##op##_386); \
- CFI_STARTPROC; \
LOCK v;
#define ENDP endp
diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
index 082a851..db3ae854 100644
--- a/arch/x86/lib/atomic64_cx8_32.S
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -11,7 +11,6 @@
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
.macro read64 reg
movl %ebx, %eax
@@ -22,16 +21,11 @@
.endm
ENTRY(atomic64_read_cx8)
- CFI_STARTPROC
-
read64 %ecx
ret
- CFI_ENDPROC
ENDPROC(atomic64_read_cx8)
ENTRY(atomic64_set_cx8)
- CFI_STARTPROC
-
1:
/* we don't need LOCK_PREFIX since aligned 64-bit writes
* are atomic on 586 and newer */
@@ -39,28 +33,23 @@
jne 1b
ret
- CFI_ENDPROC
ENDPROC(atomic64_set_cx8)
ENTRY(atomic64_xchg_cx8)
- CFI_STARTPROC
-
1:
LOCK_PREFIX
cmpxchg8b (%esi)
jne 1b
ret
- CFI_ENDPROC
ENDPROC(atomic64_xchg_cx8)
.macro addsub_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebp
- pushl_cfi_reg ebx
- pushl_cfi_reg esi
- pushl_cfi_reg edi
+ pushl %ebp
+ pushl %ebx
+ pushl %esi
+ pushl %edi
movl %eax, %esi
movl %edx, %edi
@@ -79,12 +68,11 @@
10:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg edi
- popl_cfi_reg esi
- popl_cfi_reg ebx
- popl_cfi_reg ebp
+ popl %edi
+ popl %esi
+ popl %ebx
+ popl %ebp
ret
- CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
@@ -93,8 +81,7 @@
.macro incdec_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
@@ -109,9 +96,8 @@
10:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
@@ -119,8 +105,7 @@
incdec_return dec sub sbb
ENTRY(atomic64_dec_if_positive_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
@@ -136,18 +121,16 @@
2:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_dec_if_positive_cx8)
ENTRY(atomic64_add_unless_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebp
- pushl_cfi_reg ebx
+ pushl %ebp
+ pushl %ebx
/* these just push these two parameters on the stack */
- pushl_cfi_reg edi
- pushl_cfi_reg ecx
+ pushl %edi
+ pushl %ecx
movl %eax, %ebp
movl %edx, %edi
@@ -168,21 +151,18 @@
movl $1, %eax
3:
addl $8, %esp
- CFI_ADJUST_CFA_OFFSET -8
- popl_cfi_reg ebx
- popl_cfi_reg ebp
+ popl %ebx
+ popl %ebp
ret
4:
cmpl %edx, 4(%esp)
jne 2b
xorl %eax, %eax
jmp 3b
- CFI_ENDPROC
ENDPROC(atomic64_add_unless_cx8)
ENTRY(atomic64_inc_not_zero_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
@@ -199,7 +179,6 @@
movl $1, %eax
3:
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S
index 9bc944a..c1e6232 100644
--- a/arch/x86/lib/checksum_32.S
+++ b/arch/x86/lib/checksum_32.S
@@ -26,7 +26,6 @@
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
@@ -50,9 +49,8 @@
* alignment for the unrolled loop.
*/
ENTRY(csum_partial)
- CFI_STARTPROC
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %esi
+ pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: unsigned char *buff
@@ -129,10 +127,9 @@
jz 8f
roll $8, %eax
8:
- popl_cfi_reg ebx
- popl_cfi_reg esi
+ popl %ebx
+ popl %esi
ret
- CFI_ENDPROC
ENDPROC(csum_partial)
#else
@@ -140,9 +137,8 @@
/* Version for PentiumII/PPro */
ENTRY(csum_partial)
- CFI_STARTPROC
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %esi
+ pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: const unsigned char *buf
@@ -249,10 +245,9 @@
jz 90f
roll $8, %eax
90:
- popl_cfi_reg ebx
- popl_cfi_reg esi
+ popl %ebx
+ popl %esi
ret
- CFI_ENDPROC
ENDPROC(csum_partial)
#endif
@@ -287,12 +282,10 @@
#define FP 12
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
subl $4,%esp
- CFI_ADJUST_CFA_OFFSET 4
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %edi
+ pushl %esi
+ pushl %ebx
movl ARGBASE+16(%esp),%eax # sum
movl ARGBASE+12(%esp),%ecx # len
movl ARGBASE+4(%esp),%esi # src
@@ -401,12 +394,11 @@
.previous
- popl_cfi_reg ebx
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi %ecx # equivalent to addl $4,%esp
+ popl %ebx
+ popl %esi
+ popl %edi
+ popl %ecx # equivalent to addl $4,%esp
ret
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#else
@@ -426,10 +418,9 @@
#define ARGBASE 12
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
- pushl_cfi_reg ebx
- pushl_cfi_reg edi
- pushl_cfi_reg esi
+ pushl %ebx
+ pushl %edi
+ pushl %esi
movl ARGBASE+4(%esp),%esi #src
movl ARGBASE+8(%esp),%edi #dst
movl ARGBASE+12(%esp),%ecx #len
@@ -489,11 +480,10 @@
jmp 7b
.previous
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi_reg ebx
+ popl %esi
+ popl %edi
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#undef ROUND
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index e67e579..a2fe51b 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,5 +1,4 @@
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
@@ -15,7 +14,6 @@
* %rdi - page
*/
ENTRY(clear_page)
- CFI_STARTPROC
ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
"jmp clear_page_c_e", X86_FEATURE_ERMS
@@ -24,11 +22,9 @@
xorl %eax,%eax
rep stosq
ret
- CFI_ENDPROC
ENDPROC(clear_page)
ENTRY(clear_page_orig)
- CFI_STARTPROC
xorl %eax,%eax
movl $4096/64,%ecx
@@ -48,14 +44,11 @@
jnz .Lloop
nop
ret
- CFI_ENDPROC
ENDPROC(clear_page_orig)
ENTRY(clear_page_c_e)
- CFI_STARTPROC
movl $4096,%ecx
xorl %eax,%eax
rep stosb
ret
- CFI_ENDPROC
ENDPROC(clear_page_c_e)
diff --git a/arch/x86/lib/cmpxchg16b_emu.S b/arch/x86/lib/cmpxchg16b_emu.S
index 40a1725..9b33024 100644
--- a/arch/x86/lib/cmpxchg16b_emu.S
+++ b/arch/x86/lib/cmpxchg16b_emu.S
@@ -6,7 +6,6 @@
*
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/percpu.h>
.text
@@ -21,7 +20,6 @@
* %al : Operation successful
*/
ENTRY(this_cpu_cmpxchg16b_emu)
-CFI_STARTPROC
#
# Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
@@ -32,7 +30,7 @@
# *atomic* on a single cpu (as provided by the this_cpu_xx class of
# macros).
#
- pushfq_cfi
+ pushfq
cli
cmpq PER_CPU_VAR((%rsi)), %rax
@@ -43,17 +41,13 @@
movq %rbx, PER_CPU_VAR((%rsi))
movq %rcx, PER_CPU_VAR(8(%rsi))
- CFI_REMEMBER_STATE
- popfq_cfi
+ popfq
mov $1, %al
ret
- CFI_RESTORE_STATE
.Lnot_same:
- popfq_cfi
+ popfq
xor %al,%al
ret
-CFI_ENDPROC
-
ENDPROC(this_cpu_cmpxchg16b_emu)
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
index b4807fce..ad53497 100644
--- a/arch/x86/lib/cmpxchg8b_emu.S
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -7,7 +7,6 @@
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
.text
@@ -20,14 +19,13 @@
* %ecx : high 32 bits of new value
*/
ENTRY(cmpxchg8b_emu)
-CFI_STARTPROC
#
# Emulate 'cmpxchg8b (%esi)' on UP except we don't
# set the whole ZF thing (caller will just compare
# eax:edx with the expected value)
#
- pushfl_cfi
+ pushfl
cli
cmpl (%esi), %eax
@@ -38,18 +36,15 @@
movl %ebx, (%esi)
movl %ecx, 4(%esi)
- CFI_REMEMBER_STATE
- popfl_cfi
+ popfl
ret
- CFI_RESTORE_STATE
.Lnot_same:
movl (%esi), %eax
.Lhalf_same:
movl 4(%esi), %edx
- popfl_cfi
+ popfl
ret
-CFI_ENDPROC
ENDPROC(cmpxchg8b_emu)
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 8239dbc..009f982 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -1,7 +1,6 @@
/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
@@ -13,22 +12,16 @@
*/
ALIGN
ENTRY(copy_page)
- CFI_STARTPROC
ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
movl $4096/8, %ecx
rep movsq
ret
- CFI_ENDPROC
ENDPROC(copy_page)
ENTRY(copy_page_regs)
- CFI_STARTPROC
subq $2*8, %rsp
- CFI_ADJUST_CFA_OFFSET 2*8
movq %rbx, (%rsp)
- CFI_REL_OFFSET rbx, 0
movq %r12, 1*8(%rsp)
- CFI_REL_OFFSET r12, 1*8
movl $(4096/64)-5, %ecx
.p2align 4
@@ -87,11 +80,7 @@
jnz .Loop2
movq (%rsp), %rbx
- CFI_RESTORE rbx
movq 1*8(%rsp), %r12
- CFI_RESTORE r12
addq $2*8, %rsp
- CFI_ADJUST_CFA_OFFSET -2*8
ret
- CFI_ENDPROC
ENDPROC(copy_page_regs)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index fa997df..982ce34 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -7,7 +7,6 @@
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
@@ -16,33 +15,8 @@
#include <asm/asm.h>
#include <asm/smap.h>
- .macro ALIGN_DESTINATION
- /* check for bad alignment of destination */
- movl %edi,%ecx
- andl $7,%ecx
- jz 102f /* already aligned */
- subl $8,%ecx
- negl %ecx
- subl %ecx,%edx
-100: movb (%rsi),%al
-101: movb %al,(%rdi)
- incq %rsi
- incq %rdi
- decl %ecx
- jnz 100b
-102:
- .section .fixup,"ax"
-103: addl %ecx,%edx /* ecx is zerorest also */
- jmp copy_user_handle_tail
- .previous
-
- _ASM_EXTABLE(100b,103b)
- _ASM_EXTABLE(101b,103b)
- .endm
-
/* Standard copy_to_user with segment limit checking */
ENTRY(_copy_to_user)
- CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rdi,%rcx
addq %rdx,%rcx
@@ -54,12 +28,10 @@
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
- CFI_ENDPROC
ENDPROC(_copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(_copy_from_user)
- CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rsi,%rcx
addq %rdx,%rcx
@@ -71,14 +43,12 @@
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
- CFI_ENDPROC
ENDPROC(_copy_from_user)
.section .fixup,"ax"
/* must zero dest */
ENTRY(bad_from_user)
bad_from_user:
- CFI_STARTPROC
movl %edx,%ecx
xorl %eax,%eax
rep
@@ -86,7 +56,6 @@
bad_to_user:
movl %edx,%eax
ret
- CFI_ENDPROC
ENDPROC(bad_from_user)
.previous
@@ -104,7 +73,6 @@
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_unrolled)
- CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
@@ -186,7 +154,6 @@
_ASM_EXTABLE(19b,40b)
_ASM_EXTABLE(21b,50b)
_ASM_EXTABLE(22b,50b)
- CFI_ENDPROC
ENDPROC(copy_user_generic_unrolled)
/* Some CPUs run faster using the string copy instructions.
@@ -208,7 +175,6 @@
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_string)
- CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 2f /* less than 8 bytes, go to byte copy loop */
@@ -233,7 +199,6 @@
_ASM_EXTABLE(1b,11b)
_ASM_EXTABLE(3b,12b)
- CFI_ENDPROC
ENDPROC(copy_user_generic_string)
/*
@@ -249,7 +214,6 @@
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_enhanced_fast_string)
- CFI_STARTPROC
ASM_STAC
movl %edx,%ecx
1: rep
@@ -264,5 +228,94 @@
.previous
_ASM_EXTABLE(1b,12b)
- CFI_ENDPROC
ENDPROC(copy_user_enhanced_fast_string)
+
+/*
+ * copy_user_nocache - Uncached memory copy with exception handling
+ * This will force destination/source out of cache for more performance.
+ */
+ENTRY(__copy_user_nocache)
+ ASM_STAC
+ cmpl $8,%edx
+ jb 20f /* less then 8 bytes, go to byte copy loop */
+ ALIGN_DESTINATION
+ movl %edx,%ecx
+ andl $63,%edx
+ shrl $6,%ecx
+ jz 17f
+1: movq (%rsi),%r8
+2: movq 1*8(%rsi),%r9
+3: movq 2*8(%rsi),%r10
+4: movq 3*8(%rsi),%r11
+5: movnti %r8,(%rdi)
+6: movnti %r9,1*8(%rdi)
+7: movnti %r10,2*8(%rdi)
+8: movnti %r11,3*8(%rdi)
+9: movq 4*8(%rsi),%r8
+10: movq 5*8(%rsi),%r9
+11: movq 6*8(%rsi),%r10
+12: movq 7*8(%rsi),%r11
+13: movnti %r8,4*8(%rdi)
+14: movnti %r9,5*8(%rdi)
+15: movnti %r10,6*8(%rdi)
+16: movnti %r11,7*8(%rdi)
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+ decl %ecx
+ jnz 1b
+17: movl %edx,%ecx
+ andl $7,%edx
+ shrl $3,%ecx
+ jz 20f
+18: movq (%rsi),%r8
+19: movnti %r8,(%rdi)
+ leaq 8(%rsi),%rsi
+ leaq 8(%rdi),%rdi
+ decl %ecx
+ jnz 18b
+20: andl %edx,%edx
+ jz 23f
+ movl %edx,%ecx
+21: movb (%rsi),%al
+22: movb %al,(%rdi)
+ incq %rsi
+ incq %rdi
+ decl %ecx
+ jnz 21b
+23: xorl %eax,%eax
+ ASM_CLAC
+ sfence
+ ret
+
+ .section .fixup,"ax"
+30: shll $6,%ecx
+ addl %ecx,%edx
+ jmp 60f
+40: lea (%rdx,%rcx,8),%rdx
+ jmp 60f
+50: movl %ecx,%edx
+60: sfence
+ jmp copy_user_handle_tail
+ .previous
+
+ _ASM_EXTABLE(1b,30b)
+ _ASM_EXTABLE(2b,30b)
+ _ASM_EXTABLE(3b,30b)
+ _ASM_EXTABLE(4b,30b)
+ _ASM_EXTABLE(5b,30b)
+ _ASM_EXTABLE(6b,30b)
+ _ASM_EXTABLE(7b,30b)
+ _ASM_EXTABLE(8b,30b)
+ _ASM_EXTABLE(9b,30b)
+ _ASM_EXTABLE(10b,30b)
+ _ASM_EXTABLE(11b,30b)
+ _ASM_EXTABLE(12b,30b)
+ _ASM_EXTABLE(13b,30b)
+ _ASM_EXTABLE(14b,30b)
+ _ASM_EXTABLE(15b,30b)
+ _ASM_EXTABLE(16b,30b)
+ _ASM_EXTABLE(18b,40b)
+ _ASM_EXTABLE(19b,40b)
+ _ASM_EXTABLE(21b,50b)
+ _ASM_EXTABLE(22b,50b)
+ENDPROC(__copy_user_nocache)
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
deleted file mode 100644
index 6a4f43c..0000000
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2008 Vitaly Mayatskikh <vmayatsk@redhat.com>
- * Copyright 2002 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License v2.
- *
- * Functions to copy from and to user space.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-#define FIX_ALIGNMENT 1
-
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-
- .macro ALIGN_DESTINATION
-#ifdef FIX_ALIGNMENT
- /* check for bad alignment of destination */
- movl %edi,%ecx
- andl $7,%ecx
- jz 102f /* already aligned */
- subl $8,%ecx
- negl %ecx
- subl %ecx,%edx
-100: movb (%rsi),%al
-101: movb %al,(%rdi)
- incq %rsi
- incq %rdi
- decl %ecx
- jnz 100b
-102:
- .section .fixup,"ax"
-103: addl %ecx,%edx /* ecx is zerorest also */
- jmp copy_user_handle_tail
- .previous
-
- _ASM_EXTABLE(100b,103b)
- _ASM_EXTABLE(101b,103b)
-#endif
- .endm
-
-/*
- * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination/source out of cache for more performance.
- */
-ENTRY(__copy_user_nocache)
- CFI_STARTPROC
- ASM_STAC
- cmpl $8,%edx
- jb 20f /* less then 8 bytes, go to byte copy loop */
- ALIGN_DESTINATION
- movl %edx,%ecx
- andl $63,%edx
- shrl $6,%ecx
- jz 17f
-1: movq (%rsi),%r8
-2: movq 1*8(%rsi),%r9
-3: movq 2*8(%rsi),%r10
-4: movq 3*8(%rsi),%r11
-5: movnti %r8,(%rdi)
-6: movnti %r9,1*8(%rdi)
-7: movnti %r10,2*8(%rdi)
-8: movnti %r11,3*8(%rdi)
-9: movq 4*8(%rsi),%r8
-10: movq 5*8(%rsi),%r9
-11: movq 6*8(%rsi),%r10
-12: movq 7*8(%rsi),%r11
-13: movnti %r8,4*8(%rdi)
-14: movnti %r9,5*8(%rdi)
-15: movnti %r10,6*8(%rdi)
-16: movnti %r11,7*8(%rdi)
- leaq 64(%rsi),%rsi
- leaq 64(%rdi),%rdi
- decl %ecx
- jnz 1b
-17: movl %edx,%ecx
- andl $7,%edx
- shrl $3,%ecx
- jz 20f
-18: movq (%rsi),%r8
-19: movnti %r8,(%rdi)
- leaq 8(%rsi),%rsi
- leaq 8(%rdi),%rdi
- decl %ecx
- jnz 18b
-20: andl %edx,%edx
- jz 23f
- movl %edx,%ecx
-21: movb (%rsi),%al
-22: movb %al,(%rdi)
- incq %rsi
- incq %rdi
- decl %ecx
- jnz 21b
-23: xorl %eax,%eax
- ASM_CLAC
- sfence
- ret
-
- .section .fixup,"ax"
-30: shll $6,%ecx
- addl %ecx,%edx
- jmp 60f
-40: lea (%rdx,%rcx,8),%rdx
- jmp 60f
-50: movl %ecx,%edx
-60: sfence
- jmp copy_user_handle_tail
- .previous
-
- _ASM_EXTABLE(1b,30b)
- _ASM_EXTABLE(2b,30b)
- _ASM_EXTABLE(3b,30b)
- _ASM_EXTABLE(4b,30b)
- _ASM_EXTABLE(5b,30b)
- _ASM_EXTABLE(6b,30b)
- _ASM_EXTABLE(7b,30b)
- _ASM_EXTABLE(8b,30b)
- _ASM_EXTABLE(9b,30b)
- _ASM_EXTABLE(10b,30b)
- _ASM_EXTABLE(11b,30b)
- _ASM_EXTABLE(12b,30b)
- _ASM_EXTABLE(13b,30b)
- _ASM_EXTABLE(14b,30b)
- _ASM_EXTABLE(15b,30b)
- _ASM_EXTABLE(16b,30b)
- _ASM_EXTABLE(18b,40b)
- _ASM_EXTABLE(19b,40b)
- _ASM_EXTABLE(21b,50b)
- _ASM_EXTABLE(22b,50b)
- CFI_ENDPROC
-ENDPROC(__copy_user_nocache)
diff --git a/arch/x86/lib/csum-copy_64.S b/arch/x86/lib/csum-copy_64.S
index 9734182..7e48807 100644
--- a/arch/x86/lib/csum-copy_64.S
+++ b/arch/x86/lib/csum-copy_64.S
@@ -6,7 +6,6 @@
* for more details. No warranty for anything given at all.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
@@ -47,23 +46,16 @@
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
cmpl $3*64, %edx
jle .Lignore
.Lignore:
subq $7*8, %rsp
- CFI_ADJUST_CFA_OFFSET 7*8
movq %rbx, 2*8(%rsp)
- CFI_REL_OFFSET rbx, 2*8
movq %r12, 3*8(%rsp)
- CFI_REL_OFFSET r12, 3*8
movq %r14, 4*8(%rsp)
- CFI_REL_OFFSET r14, 4*8
movq %r13, 5*8(%rsp)
- CFI_REL_OFFSET r13, 5*8
movq %rbp, 6*8(%rsp)
- CFI_REL_OFFSET rbp, 6*8
movq %r8, (%rsp)
movq %r9, 1*8(%rsp)
@@ -206,22 +198,14 @@
addl %ebx, %eax
adcl %r9d, %eax /* carry */
- CFI_REMEMBER_STATE
.Lende:
movq 2*8(%rsp), %rbx
- CFI_RESTORE rbx
movq 3*8(%rsp), %r12
- CFI_RESTORE r12
movq 4*8(%rsp), %r14
- CFI_RESTORE r14
movq 5*8(%rsp), %r13
- CFI_RESTORE r13
movq 6*8(%rsp), %rbp
- CFI_RESTORE rbp
addq $7*8, %rsp
- CFI_ADJUST_CFA_OFFSET -7*8
ret
- CFI_RESTORE_STATE
/* Exception handlers. Very simple, zeroing is done in the wrappers */
.Lbad_source:
@@ -237,5 +221,4 @@
jz .Lende
movl $-EFAULT, (%rax)
jmp .Lende
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index a451235..46668cd 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -26,7 +26,6 @@
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/page_types.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
@@ -36,7 +35,6 @@
.text
ENTRY(__get_user_1)
- CFI_STARTPROC
GET_THREAD_INFO(%_ASM_DX)
cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
jae bad_get_user
@@ -45,11 +43,9 @@
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
- CFI_STARTPROC
add $1,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
@@ -60,11 +56,9 @@
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
- CFI_STARTPROC
add $3,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
@@ -75,11 +69,9 @@
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_4)
ENTRY(__get_user_8)
- CFI_STARTPROC
#ifdef CONFIG_X86_64
add $7,%_ASM_AX
jc bad_get_user
@@ -104,28 +96,23 @@
ASM_CLAC
ret
#endif
- CFI_ENDPROC
ENDPROC(__get_user_8)
bad_get_user:
- CFI_STARTPROC
xor %edx,%edx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
- CFI_ENDPROC
END(bad_get_user)
#ifdef CONFIG_X86_32
bad_get_user_8:
- CFI_STARTPROC
xor %edx,%edx
xor %ecx,%ecx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
- CFI_ENDPROC
END(bad_get_user_8)
#endif
diff --git a/arch/x86/lib/iomap_copy_64.S b/arch/x86/lib/iomap_copy_64.S
index 05a95e7..33147fe 100644
--- a/arch/x86/lib/iomap_copy_64.S
+++ b/arch/x86/lib/iomap_copy_64.S
@@ -16,15 +16,12 @@
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
/*
* override generic version in lib/iomap_copy.c
*/
ENTRY(__iowrite32_copy)
- CFI_STARTPROC
movl %edx,%ecx
rep movsd
ret
- CFI_ENDPROC
ENDPROC(__iowrite32_copy)
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index b046664..16698bb 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -2,7 +2,6 @@
#include <linux/linkage.h>
#include <asm/cpufeature.h>
-#include <asm/dwarf2.h>
#include <asm/alternative-asm.h>
/*
@@ -53,7 +52,6 @@
ENDPROC(memcpy_erms)
ENTRY(memcpy_orig)
- CFI_STARTPROC
movq %rdi, %rax
cmpq $0x20, %rdx
@@ -178,5 +176,4 @@
.Lend:
retq
- CFI_ENDPROC
ENDPROC(memcpy_orig)
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 0f8a0d0..ca2afdd 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -6,7 +6,6 @@
* - Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
@@ -27,7 +26,6 @@
ENTRY(memmove)
ENTRY(__memmove)
- CFI_STARTPROC
/* Handle more 32 bytes in loop */
mov %rdi, %rax
@@ -207,6 +205,5 @@
movb %r11b, (%rdi)
13:
retq
- CFI_ENDPROC
ENDPROC(__memmove)
ENDPROC(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 93118fb..2661fad 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -1,7 +1,6 @@
/* Copyright 2002 Andi Kleen, SuSE Labs */
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
@@ -66,7 +65,6 @@
ENDPROC(memset_erms)
ENTRY(memset_orig)
- CFI_STARTPROC
movq %rdi,%r10
/* expand byte value */
@@ -78,7 +76,6 @@
movl %edi,%r9d
andl $7,%r9d
jnz .Lbad_alignment
- CFI_REMEMBER_STATE
.Lafter_bad_alignment:
movq %rdx,%rcx
@@ -128,7 +125,6 @@
movq %r10,%rax
ret
- CFI_RESTORE_STATE
.Lbad_alignment:
cmpq $7,%rdx
jbe .Lhandle_7
@@ -139,5 +135,4 @@
subq %r8,%rdx
jmp .Lafter_bad_alignment
.Lfinal:
- CFI_ENDPROC
ENDPROC(memset_orig)
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 3ca5218..c815564 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -1,6 +1,5 @@
#include <linux/linkage.h>
#include <linux/errno.h>
-#include <asm/dwarf2.h>
#include <asm/asm.h>
#include <asm/msr.h>
@@ -13,9 +12,8 @@
*/
.macro op_safe_regs op
ENTRY(\op\()_safe_regs)
- CFI_STARTPROC
- pushq_cfi_reg rbx
- pushq_cfi_reg rbp
+ pushq %rbx
+ pushq %rbp
movq %rdi, %r10 /* Save pointer */
xorl %r11d, %r11d /* Return value */
movl (%rdi), %eax
@@ -25,7 +23,6 @@
movl 20(%rdi), %ebp
movl 24(%rdi), %esi
movl 28(%rdi), %edi
- CFI_REMEMBER_STATE
1: \op
2: movl %eax, (%r10)
movl %r11d, %eax /* Return value */
@@ -35,16 +32,14 @@
movl %ebp, 20(%r10)
movl %esi, 24(%r10)
movl %edi, 28(%r10)
- popq_cfi_reg rbp
- popq_cfi_reg rbx
+ popq %rbp
+ popq %rbx
ret
3:
- CFI_RESTORE_STATE
movl $-EIO, %r11d
jmp 2b
_ASM_EXTABLE(1b, 3b)
- CFI_ENDPROC
ENDPROC(\op\()_safe_regs)
.endm
@@ -52,13 +47,12 @@
.macro op_safe_regs op
ENTRY(\op\()_safe_regs)
- CFI_STARTPROC
- pushl_cfi_reg ebx
- pushl_cfi_reg ebp
- pushl_cfi_reg esi
- pushl_cfi_reg edi
- pushl_cfi $0 /* Return value */
- pushl_cfi %eax
+ pushl %ebx
+ pushl %ebp
+ pushl %esi
+ pushl %edi
+ pushl $0 /* Return value */
+ pushl %eax
movl 4(%eax), %ecx
movl 8(%eax), %edx
movl 12(%eax), %ebx
@@ -66,32 +60,28 @@
movl 24(%eax), %esi
movl 28(%eax), %edi
movl (%eax), %eax
- CFI_REMEMBER_STATE
1: \op
-2: pushl_cfi %eax
+2: pushl %eax
movl 4(%esp), %eax
- popl_cfi (%eax)
+ popl (%eax)
addl $4, %esp
- CFI_ADJUST_CFA_OFFSET -4
movl %ecx, 4(%eax)
movl %edx, 8(%eax)
movl %ebx, 12(%eax)
movl %ebp, 20(%eax)
movl %esi, 24(%eax)
movl %edi, 28(%eax)
- popl_cfi %eax
- popl_cfi_reg edi
- popl_cfi_reg esi
- popl_cfi_reg ebp
- popl_cfi_reg ebx
+ popl %eax
+ popl %edi
+ popl %esi
+ popl %ebp
+ popl %ebx
ret
3:
- CFI_RESTORE_STATE
movl $-EIO, 4(%esp)
jmp 2b
_ASM_EXTABLE(1b, 3b)
- CFI_ENDPROC
ENDPROC(\op\()_safe_regs)
.endm
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index fc6ba17..e0817a1 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -11,7 +11,6 @@
* return value.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/thread_info.h>
#include <asm/errno.h>
#include <asm/asm.h>
@@ -30,11 +29,9 @@
* as they get called from within inline assembly.
*/
-#define ENTER CFI_STARTPROC ; \
- GET_THREAD_INFO(%_ASM_BX)
+#define ENTER GET_THREAD_INFO(%_ASM_BX)
#define EXIT ASM_CLAC ; \
- ret ; \
- CFI_ENDPROC
+ ret
.text
ENTRY(__put_user_1)
@@ -87,7 +84,6 @@
ENDPROC(__put_user_8)
bad_put_user:
- CFI_STARTPROC
movl $-EFAULT,%eax
EXIT
END(bad_put_user)
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 2322abe..40027db 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -15,7 +15,6 @@
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
#define __ASM_HALF_REG(reg) __ASM_SEL(reg, e##reg)
#define __ASM_HALF_SIZE(inst) __ASM_SEL(inst##w, inst##l)
@@ -34,10 +33,10 @@
*/
#define save_common_regs \
- pushl_cfi_reg ecx
+ pushl %ecx
#define restore_common_regs \
- popl_cfi_reg ecx
+ popl %ecx
/* Avoid uglifying the argument copying x86-64 needs to do. */
.macro movq src, dst
@@ -64,50 +63,45 @@
*/
#define save_common_regs \
- pushq_cfi_reg rdi; \
- pushq_cfi_reg rsi; \
- pushq_cfi_reg rcx; \
- pushq_cfi_reg r8; \
- pushq_cfi_reg r9; \
- pushq_cfi_reg r10; \
- pushq_cfi_reg r11
+ pushq %rdi; \
+ pushq %rsi; \
+ pushq %rcx; \
+ pushq %r8; \
+ pushq %r9; \
+ pushq %r10; \
+ pushq %r11
#define restore_common_regs \
- popq_cfi_reg r11; \
- popq_cfi_reg r10; \
- popq_cfi_reg r9; \
- popq_cfi_reg r8; \
- popq_cfi_reg rcx; \
- popq_cfi_reg rsi; \
- popq_cfi_reg rdi
+ popq %r11; \
+ popq %r10; \
+ popq %r9; \
+ popq %r8; \
+ popq %rcx; \
+ popq %rsi; \
+ popq %rdi
#endif
/* Fix up special calling conventions */
ENTRY(call_rwsem_down_read_failed)
- CFI_STARTPROC
save_common_regs
- __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(push,) %__ASM_REG(dx)
movq %rax,%rdi
call rwsem_down_read_failed
- __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(pop,) %__ASM_REG(dx)
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_down_read_failed)
ENTRY(call_rwsem_down_write_failed)
- CFI_STARTPROC
save_common_regs
movq %rax,%rdi
call rwsem_down_write_failed
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_down_write_failed)
ENTRY(call_rwsem_wake)
- CFI_STARTPROC
/* do nothing if still outstanding active readers */
__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
jnz 1f
@@ -116,17 +110,14 @@
call rwsem_wake
restore_common_regs
1: ret
- CFI_ENDPROC
ENDPROC(call_rwsem_wake)
ENTRY(call_rwsem_downgrade_wake)
- CFI_STARTPROC
save_common_regs
- __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(push,) %__ASM_REG(dx)
movq %rax,%rdi
call rwsem_downgrade_wake
- __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(pop,) %__ASM_REG(dx)
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_downgrade_wake)
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 1d55318..8533b46 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -40,7 +40,7 @@
*/
uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
[_PAGE_CACHE_MODE_WB ] = 0 | 0 ,
- [_PAGE_CACHE_MODE_WC ] = _PAGE_PWT | 0 ,
+ [_PAGE_CACHE_MODE_WC ] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC_MINUS] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC ] = _PAGE_PWT | _PAGE_PCD,
[_PAGE_CACHE_MODE_WT ] = 0 | _PAGE_PCD,
@@ -50,11 +50,11 @@
uint8_t __pte2cachemode_tbl[8] = {
[__pte2cm_idx( 0 | 0 | 0 )] = _PAGE_CACHE_MODE_WB,
- [__pte2cm_idx(_PAGE_PWT | 0 | 0 )] = _PAGE_CACHE_MODE_WC,
+ [__pte2cm_idx(_PAGE_PWT | 0 | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx( 0 | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC,
[__pte2cm_idx( 0 | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_WB,
- [__pte2cm_idx(_PAGE_PWT | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_WC,
+ [__pte2cm_idx(_PAGE_PWT | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(0 | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
};
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index 2b7ece0..9c0ff04 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -78,13 +78,13 @@
iomap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot)
{
/*
- * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
- * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
- * MTRR is UC or WC. UC_MINUS gets the real intention, of the
- * user, which is "WC if the MTRR is WC, UC if you can't do that."
+ * For non-PAT systems, translate non-WB request to UC- just in
+ * case the caller set the PWT bit to prot directly without using
+ * pgprot_writecombine(). UC- translates to uncached if the MTRR
+ * is UC or WC. UC- gets the real intention, of the user, which is
+ * "WC if the MTRR is WC, UC if you can't do that."
*/
- if (!pat_enabled && pgprot_val(prot) ==
- (__PAGE_KERNEL | cachemode2protval(_PAGE_CACHE_MODE_WC)))
+ if (!pat_enabled() && pgprot2cachemode(prot) != _PAGE_CACHE_MODE_WB)
prot = __pgprot(__PAGE_KERNEL |
cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS));
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 27ff212..cc5ccc4 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -42,6 +42,9 @@
case _PAGE_CACHE_MODE_WC:
err = _set_memory_wc(vaddr, nrpages);
break;
+ case _PAGE_CACHE_MODE_WT:
+ err = _set_memory_wt(vaddr, nrpages);
+ break;
case _PAGE_CACHE_MODE_WB:
err = _set_memory_wb(vaddr, nrpages);
break;
@@ -172,6 +175,10 @@
prot = __pgprot(pgprot_val(prot) |
cachemode2protval(_PAGE_CACHE_MODE_WC));
break;
+ case _PAGE_CACHE_MODE_WT:
+ prot = __pgprot(pgprot_val(prot) |
+ cachemode2protval(_PAGE_CACHE_MODE_WT));
+ break;
case _PAGE_CACHE_MODE_WB:
break;
}
@@ -234,10 +241,11 @@
{
/*
* Ideally, this should be:
- * pat_enabled ? _PAGE_CACHE_MODE_UC : _PAGE_CACHE_MODE_UC_MINUS;
+ * pat_enabled() ? _PAGE_CACHE_MODE_UC : _PAGE_CACHE_MODE_UC_MINUS;
*
* Till we fix all X drivers to use ioremap_wc(), we will use
- * UC MINUS.
+ * UC MINUS. Drivers that are certain they need or can already
+ * be converted over to strong UC can use ioremap_uc().
*/
enum page_cache_mode pcm = _PAGE_CACHE_MODE_UC_MINUS;
@@ -247,6 +255,39 @@
EXPORT_SYMBOL(ioremap_nocache);
/**
+ * ioremap_uc - map bus memory into CPU space as strongly uncachable
+ * @phys_addr: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_uc performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked with a strong
+ * preference as completely uncachable on the CPU when possible. For non-PAT
+ * systems this ends up setting page-attribute flags PCD=1, PWT=1. For PAT
+ * systems this will set the PAT entry for the pages as strong UC. This call
+ * will honor existing caching rules from things like the PCI bus. Note that
+ * there are other caches and buffers on many busses. In particular driver
+ * authors should read up on PCI writes.
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ *
+ * Must be freed with iounmap.
+ */
+void __iomem *ioremap_uc(resource_size_t phys_addr, unsigned long size)
+{
+ enum page_cache_mode pcm = _PAGE_CACHE_MODE_UC;
+
+ return __ioremap_caller(phys_addr, size, pcm,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL_GPL(ioremap_uc);
+
+/**
* ioremap_wc - map memory into CPU space write combined
* @phys_addr: bus address of the memory
* @size: size of the resource to map
@@ -258,14 +299,28 @@
*/
void __iomem *ioremap_wc(resource_size_t phys_addr, unsigned long size)
{
- if (pat_enabled)
- return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WC,
+ return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WC,
__builtin_return_address(0));
- else
- return ioremap_nocache(phys_addr, size);
}
EXPORT_SYMBOL(ioremap_wc);
+/**
+ * ioremap_wt - map memory into CPU space write through
+ * @phys_addr: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * This version of ioremap ensures that the memory is marked write through.
+ * Write through stores data into memory while keeping the cache up-to-date.
+ *
+ * Must be freed with iounmap.
+ */
+void __iomem *ioremap_wt(resource_size_t phys_addr, unsigned long size)
+{
+ return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WT,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wt);
+
void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
{
return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WB,
@@ -331,7 +386,7 @@
}
EXPORT_SYMBOL(iounmap);
-int arch_ioremap_pud_supported(void)
+int __init arch_ioremap_pud_supported(void)
{
#ifdef CONFIG_X86_64
return cpu_has_gbpages;
@@ -340,7 +395,7 @@
#endif
}
-int arch_ioremap_pmd_supported(void)
+int __init arch_ioremap_pmd_supported(void)
{
return cpu_has_pse;
}
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index 6629f39..8ff686a 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -9,6 +9,7 @@
#include <linux/random.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
#include <asm/pgtable.h>
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 89af288..727158c 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -14,6 +14,7 @@
#include <linux/percpu.h>
#include <linux/gfp.h>
#include <linux/pci.h>
+#include <linux/vmalloc.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -129,16 +130,15 @@
*/
void clflush_cache_range(void *vaddr, unsigned int size)
{
- void *vend = vaddr + size - 1;
+ unsigned long clflush_mask = boot_cpu_data.x86_clflush_size - 1;
+ void *vend = vaddr + size;
+ void *p;
mb();
- for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size)
- clflushopt(vaddr);
- /*
- * Flush any possible final partial cacheline:
- */
- clflushopt(vend);
+ for (p = (void *)((unsigned long)vaddr & ~clflush_mask);
+ p < vend; p += boot_cpu_data.x86_clflush_size)
+ clflushopt(p);
mb();
}
@@ -418,13 +418,11 @@
phys_addr_t phys_addr;
unsigned long offset;
enum pg_level level;
- unsigned long psize;
unsigned long pmask;
pte_t *pte;
pte = lookup_address(virt_addr, &level);
BUG_ON(!pte);
- psize = page_level_size(level);
pmask = page_level_mask(level);
offset = virt_addr & ~pmask;
phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
@@ -1468,6 +1466,9 @@
{
/*
* for now UC MINUS. see comments in ioremap_nocache()
+ * If you really need strong UC use ioremap_uc(), but note
+ * that you cannot override IO areas with set_memory_*() as
+ * these helpers cannot work with IO memory.
*/
return change_page_attr_set(&addr, numpages,
cachemode2pgprot(_PAGE_CACHE_MODE_UC_MINUS),
@@ -1502,12 +1503,10 @@
static int _set_memory_array(unsigned long *addr, int addrinarray,
enum page_cache_mode new_type)
{
+ enum page_cache_mode set_type;
int i, j;
int ret;
- /*
- * for now UC MINUS. see comments in ioremap_nocache()
- */
for (i = 0; i < addrinarray; i++) {
ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
new_type, NULL);
@@ -1515,9 +1514,12 @@
goto out_free;
}
+ /* If WC, set to UC- first and then WC */
+ set_type = (new_type == _PAGE_CACHE_MODE_WC) ?
+ _PAGE_CACHE_MODE_UC_MINUS : new_type;
+
ret = change_page_attr_set(addr, addrinarray,
- cachemode2pgprot(_PAGE_CACHE_MODE_UC_MINUS),
- 1);
+ cachemode2pgprot(set_type), 1);
if (!ret && new_type == _PAGE_CACHE_MODE_WC)
ret = change_page_attr_set_clr(addr, addrinarray,
@@ -1549,6 +1551,12 @@
}
EXPORT_SYMBOL(set_memory_array_wc);
+int set_memory_array_wt(unsigned long *addr, int addrinarray)
+{
+ return _set_memory_array(addr, addrinarray, _PAGE_CACHE_MODE_WT);
+}
+EXPORT_SYMBOL_GPL(set_memory_array_wt);
+
int _set_memory_wc(unsigned long addr, int numpages)
{
int ret;
@@ -1571,27 +1579,42 @@
{
int ret;
- if (!pat_enabled)
- return set_memory_uc(addr, numpages);
-
ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
_PAGE_CACHE_MODE_WC, NULL);
if (ret)
- goto out_err;
+ return ret;
ret = _set_memory_wc(addr, numpages);
if (ret)
- goto out_free;
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
- return 0;
-
-out_free:
- free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
-out_err:
return ret;
}
EXPORT_SYMBOL(set_memory_wc);
+int _set_memory_wt(unsigned long addr, int numpages)
+{
+ return change_page_attr_set(&addr, numpages,
+ cachemode2pgprot(_PAGE_CACHE_MODE_WT), 0);
+}
+
+int set_memory_wt(unsigned long addr, int numpages)
+{
+ int ret;
+
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_MODE_WT, NULL);
+ if (ret)
+ return ret;
+
+ ret = _set_memory_wt(addr, numpages);
+ if (ret)
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(set_memory_wt);
+
int _set_memory_wb(unsigned long addr, int numpages)
{
/* WB cache mode is hard wired to all cache attribute bits being 0 */
@@ -1682,6 +1705,7 @@
{
unsigned long start;
unsigned long end;
+ enum page_cache_mode set_type;
int i;
int free_idx;
int ret;
@@ -1695,8 +1719,12 @@
goto err_out;
}
+ /* If WC, set to UC- first and then WC */
+ set_type = (new_type == _PAGE_CACHE_MODE_WC) ?
+ _PAGE_CACHE_MODE_UC_MINUS : new_type;
+
ret = cpa_set_pages_array(pages, addrinarray,
- cachemode2pgprot(_PAGE_CACHE_MODE_UC_MINUS));
+ cachemode2pgprot(set_type));
if (!ret && new_type == _PAGE_CACHE_MODE_WC)
ret = change_page_attr_set_clr(NULL, addrinarray,
cachemode2pgprot(
@@ -1730,6 +1758,12 @@
}
EXPORT_SYMBOL(set_pages_array_wc);
+int set_pages_array_wt(struct page **pages, int addrinarray)
+{
+ return _set_pages_array(pages, addrinarray, _PAGE_CACHE_MODE_WT);
+}
+EXPORT_SYMBOL_GPL(set_pages_array_wt);
+
int set_pages_wb(struct page *page, int numpages)
{
unsigned long addr = (unsigned long)page_address(page);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 35af677..188e3e0 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -33,13 +33,17 @@
#include "pat_internal.h"
#include "mm_internal.h"
-#ifdef CONFIG_X86_PAT
-int __read_mostly pat_enabled = 1;
+#undef pr_fmt
+#define pr_fmt(fmt) "" fmt
+
+static bool boot_cpu_done;
+
+static int __read_mostly __pat_enabled = IS_ENABLED(CONFIG_X86_PAT);
static inline void pat_disable(const char *reason)
{
- pat_enabled = 0;
- printk(KERN_INFO "%s\n", reason);
+ __pat_enabled = 0;
+ pr_info("x86/PAT: %s\n", reason);
}
static int __init nopat(char *str)
@@ -48,13 +52,12 @@
return 0;
}
early_param("nopat", nopat);
-#else
-static inline void pat_disable(const char *reason)
-{
- (void)reason;
-}
-#endif
+bool pat_enabled(void)
+{
+ return !!__pat_enabled;
+}
+EXPORT_SYMBOL_GPL(pat_enabled);
int pat_debug_enable;
@@ -65,22 +68,24 @@
}
__setup("debugpat", pat_debug_setup);
-static u64 __read_mostly boot_pat_state;
-
#ifdef CONFIG_X86_PAT
/*
- * X86 PAT uses page flags WC and Uncached together to keep track of
- * memory type of pages that have backing page struct. X86 PAT supports 3
- * different memory types, _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC and
- * _PAGE_CACHE_MODE_UC_MINUS and fourth state where page's memory type has not
- * been changed from its default (value of -1 used to denote this).
- * Note we do not support _PAGE_CACHE_MODE_UC here.
+ * X86 PAT uses page flags arch_1 and uncached together to keep track of
+ * memory type of pages that have backing page struct.
+ *
+ * X86 PAT supports 4 different memory types:
+ * - _PAGE_CACHE_MODE_WB
+ * - _PAGE_CACHE_MODE_WC
+ * - _PAGE_CACHE_MODE_UC_MINUS
+ * - _PAGE_CACHE_MODE_WT
+ *
+ * _PAGE_CACHE_MODE_WB is the default type.
*/
-#define _PGMT_DEFAULT 0
+#define _PGMT_WB 0
#define _PGMT_WC (1UL << PG_arch_1)
#define _PGMT_UC_MINUS (1UL << PG_uncached)
-#define _PGMT_WB (1UL << PG_uncached | 1UL << PG_arch_1)
+#define _PGMT_WT (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_MASK (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_CLEAR_MASK (~_PGMT_MASK)
@@ -88,14 +93,14 @@
{
unsigned long pg_flags = pg->flags & _PGMT_MASK;
- if (pg_flags == _PGMT_DEFAULT)
- return -1;
+ if (pg_flags == _PGMT_WB)
+ return _PAGE_CACHE_MODE_WB;
else if (pg_flags == _PGMT_WC)
return _PAGE_CACHE_MODE_WC;
else if (pg_flags == _PGMT_UC_MINUS)
return _PAGE_CACHE_MODE_UC_MINUS;
else
- return _PAGE_CACHE_MODE_WB;
+ return _PAGE_CACHE_MODE_WT;
}
static inline void set_page_memtype(struct page *pg,
@@ -112,11 +117,12 @@
case _PAGE_CACHE_MODE_UC_MINUS:
memtype_flags = _PGMT_UC_MINUS;
break;
- case _PAGE_CACHE_MODE_WB:
- memtype_flags = _PGMT_WB;
+ case _PAGE_CACHE_MODE_WT:
+ memtype_flags = _PGMT_WT;
break;
+ case _PAGE_CACHE_MODE_WB:
default:
- memtype_flags = _PGMT_DEFAULT;
+ memtype_flags = _PGMT_WB;
break;
}
@@ -174,78 +180,154 @@
* configuration.
* Using lower indices is preferred, so we start with highest index.
*/
-void pat_init_cache_modes(void)
+void pat_init_cache_modes(u64 pat)
{
- int i;
enum page_cache_mode cache;
char pat_msg[33];
- u64 pat;
+ int i;
- rdmsrl(MSR_IA32_CR_PAT, pat);
pat_msg[32] = 0;
for (i = 7; i >= 0; i--) {
cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
pat_msg + 4 * i);
update_cache_mode_entry(i, cache);
}
- pr_info("PAT configuration [0-7]: %s\n", pat_msg);
+ pr_info("x86/PAT: Configuration [0-7]: %s\n", pat_msg);
}
#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8))
-void pat_init(void)
+static void pat_bsp_init(u64 pat)
{
- u64 pat;
- bool boot_cpu = !boot_pat_state;
-
- if (!pat_enabled)
- return;
+ u64 tmp_pat;
if (!cpu_has_pat) {
- if (!boot_pat_state) {
- pat_disable("PAT not supported by CPU.");
- return;
- } else {
- /*
- * If this happens we are on a secondary CPU, but
- * switched to PAT on the boot CPU. We have no way to
- * undo PAT.
- */
- printk(KERN_ERR "PAT enabled, "
- "but not supported by secondary CPU\n");
- BUG();
- }
+ pat_disable("PAT not supported by CPU.");
+ return;
}
- /* Set PWT to Write-Combining. All other bits stay the same */
- /*
- * PTE encoding used in Linux:
- * PAT
- * |PCD
- * ||PWT
- * |||
- * 000 WB _PAGE_CACHE_WB
- * 001 WC _PAGE_CACHE_WC
- * 010 UC- _PAGE_CACHE_UC_MINUS
- * 011 UC _PAGE_CACHE_UC
- * PAT bit unused
- */
- pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
- PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ if (!pat_enabled())
+ goto done;
- /* Boot CPU check */
- if (!boot_pat_state) {
- rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
- if (!boot_pat_state) {
- pat_disable("PAT read returns always zero, disabled.");
- return;
- }
+ rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
+ if (!tmp_pat) {
+ pat_disable("PAT MSR is 0, disabled.");
+ return;
}
wrmsrl(MSR_IA32_CR_PAT, pat);
- if (boot_cpu)
- pat_init_cache_modes();
+done:
+ pat_init_cache_modes(pat);
+}
+
+static void pat_ap_init(u64 pat)
+{
+ if (!pat_enabled())
+ return;
+
+ if (!cpu_has_pat) {
+ /*
+ * If this happens we are on a secondary CPU, but switched to
+ * PAT on the boot CPU. We have no way to undo PAT.
+ */
+ panic("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
+ }
+
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+}
+
+void pat_init(void)
+{
+ u64 pat;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ if (!pat_enabled()) {
+ /*
+ * No PAT. Emulate the PAT table that corresponds to the two
+ * cache bits, PWT (Write Through) and PCD (Cache Disable). This
+ * setup is the same as the BIOS default setup when the system
+ * has PAT but the "nopat" boot option has been specified. This
+ * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+ *
+ * PTE encoding:
+ *
+ * PCD
+ * |PWT PAT
+ * || slot
+ * 00 0 WB : _PAGE_CACHE_MODE_WB
+ * 01 1 WT : _PAGE_CACHE_MODE_WT
+ * 10 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 11 3 UC : _PAGE_CACHE_MODE_UC
+ *
+ * NOTE: When WC or WP is used, it is redirected to UC- per
+ * the default setup in __cachemode2pte_tbl[].
+ */
+ pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+
+ } else if ((c->x86_vendor == X86_VENDOR_INTEL) &&
+ (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
+ ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
+ /*
+ * PAT support with the lower four entries. Intel Pentium 2,
+ * 3, M, and 4 are affected by PAT errata, which makes the
+ * upper four entries unusable. To be on the safe side, we don't
+ * use those.
+ *
+ * PTE encoding:
+ * PAT
+ * |PCD
+ * ||PWT PAT
+ * ||| slot
+ * 000 0 WB : _PAGE_CACHE_MODE_WB
+ * 001 1 WC : _PAGE_CACHE_MODE_WC
+ * 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 011 3 UC : _PAGE_CACHE_MODE_UC
+ * PAT bit unused
+ *
+ * NOTE: When WT or WP is used, it is redirected to UC- per
+ * the default setup in __cachemode2pte_tbl[].
+ */
+ pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ } else {
+ /*
+ * Full PAT support. We put WT in slot 7 to improve
+ * robustness in the presence of errata that might cause
+ * the high PAT bit to be ignored. This way, a buggy slot 7
+ * access will hit slot 3, and slot 3 is UC, so at worst
+ * we lose performance without causing a correctness issue.
+ * Pentium 4 erratum N46 is an example for such an erratum,
+ * although we try not to use PAT at all on affected CPUs.
+ *
+ * PTE encoding:
+ * PAT
+ * |PCD
+ * ||PWT PAT
+ * ||| slot
+ * 000 0 WB : _PAGE_CACHE_MODE_WB
+ * 001 1 WC : _PAGE_CACHE_MODE_WC
+ * 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 011 3 UC : _PAGE_CACHE_MODE_UC
+ * 100 4 WB : Reserved
+ * 101 5 WC : Reserved
+ * 110 6 UC-: Reserved
+ * 111 7 WT : _PAGE_CACHE_MODE_WT
+ *
+ * The reserved slots are unused, but mapped to their
+ * corresponding types in the presence of PAT errata.
+ */
+ pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, WT);
+ }
+
+ if (!boot_cpu_done) {
+ pat_bsp_init(pat);
+ boot_cpu_done = true;
+ } else {
+ pat_ap_init(pat);
+ }
}
#undef PAT
@@ -267,9 +349,9 @@
* request is for WB.
*/
if (req_type == _PAGE_CACHE_MODE_WB) {
- u8 mtrr_type;
+ u8 mtrr_type, uniform;
- mtrr_type = mtrr_type_lookup(start, end);
+ mtrr_type = mtrr_type_lookup(start, end, &uniform);
if (mtrr_type != MTRR_TYPE_WRBACK)
return _PAGE_CACHE_MODE_UC_MINUS;
@@ -324,9 +406,14 @@
/*
* For RAM pages, we use page flags to mark the pages with appropriate type.
- * Here we do two pass:
- * - Find the memtype of all the pages in the range, look for any conflicts
- * - In case of no conflicts, set the new memtype for pages in the range
+ * The page flags are limited to four types, WB (default), WC, WT and UC-.
+ * WP request fails with -EINVAL, and UC gets redirected to UC-. Setting
+ * a new memory type is only allowed for a page mapped with the default WB
+ * type.
+ *
+ * Here we do two passes:
+ * - Find the memtype of all the pages in the range, look for any conflicts.
+ * - In case of no conflicts, set the new memtype for pages in the range.
*/
static int reserve_ram_pages_type(u64 start, u64 end,
enum page_cache_mode req_type,
@@ -335,6 +422,12 @@
struct page *page;
u64 pfn;
+ if (req_type == _PAGE_CACHE_MODE_WP) {
+ if (new_type)
+ *new_type = _PAGE_CACHE_MODE_UC_MINUS;
+ return -EINVAL;
+ }
+
if (req_type == _PAGE_CACHE_MODE_UC) {
/* We do not support strong UC */
WARN_ON_ONCE(1);
@@ -346,8 +439,8 @@
page = pfn_to_page(pfn);
type = get_page_memtype(page);
- if (type != -1) {
- pr_info("reserve_ram_pages_type failed [mem %#010Lx-%#010Lx], track 0x%x, req 0x%x\n",
+ if (type != _PAGE_CACHE_MODE_WB) {
+ pr_info("x86/PAT: reserve_ram_pages_type failed [mem %#010Lx-%#010Lx], track 0x%x, req 0x%x\n",
start, end - 1, type, req_type);
if (new_type)
*new_type = type;
@@ -373,7 +466,7 @@
for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
page = pfn_to_page(pfn);
- set_page_memtype(page, -1);
+ set_page_memtype(page, _PAGE_CACHE_MODE_WB);
}
return 0;
}
@@ -384,6 +477,7 @@
* - _PAGE_CACHE_MODE_WC
* - _PAGE_CACHE_MODE_UC_MINUS
* - _PAGE_CACHE_MODE_UC
+ * - _PAGE_CACHE_MODE_WT
*
* If new_type is NULL, function will return an error if it cannot reserve the
* region with req_type. If new_type is non-NULL, function will return
@@ -400,14 +494,10 @@
BUG_ON(start >= end); /* end is exclusive */
- if (!pat_enabled) {
+ if (!pat_enabled()) {
/* This is identical to page table setting without PAT */
- if (new_type) {
- if (req_type == _PAGE_CACHE_MODE_WC)
- *new_type = _PAGE_CACHE_MODE_UC_MINUS;
- else
- *new_type = req_type;
- }
+ if (new_type)
+ *new_type = req_type;
return 0;
}
@@ -451,9 +541,9 @@
err = rbt_memtype_check_insert(new, new_type);
if (err) {
- printk(KERN_INFO "reserve_memtype failed [mem %#010Lx-%#010Lx], track %s, req %s\n",
- start, end - 1,
- cattr_name(new->type), cattr_name(req_type));
+ pr_info("x86/PAT: reserve_memtype failed [mem %#010Lx-%#010Lx], track %s, req %s\n",
+ start, end - 1,
+ cattr_name(new->type), cattr_name(req_type));
kfree(new);
spin_unlock(&memtype_lock);
@@ -475,7 +565,7 @@
int is_range_ram;
struct memtype *entry;
- if (!pat_enabled)
+ if (!pat_enabled())
return 0;
/* Low ISA region is always mapped WB. No need to track */
@@ -497,8 +587,8 @@
spin_unlock(&memtype_lock);
if (!entry) {
- printk(KERN_INFO "%s:%d freeing invalid memtype [mem %#010Lx-%#010Lx]\n",
- current->comm, current->pid, start, end - 1);
+ pr_info("x86/PAT: %s:%d freeing invalid memtype [mem %#010Lx-%#010Lx]\n",
+ current->comm, current->pid, start, end - 1);
return -EINVAL;
}
@@ -517,7 +607,7 @@
* Only to be called when PAT is enabled
*
* Returns _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC, _PAGE_CACHE_MODE_UC_MINUS
- * or _PAGE_CACHE_MODE_UC
+ * or _PAGE_CACHE_MODE_WT.
*/
static enum page_cache_mode lookup_memtype(u64 paddr)
{
@@ -529,16 +619,9 @@
if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
struct page *page;
- page = pfn_to_page(paddr >> PAGE_SHIFT);
- rettype = get_page_memtype(page);
- /*
- * -1 from get_page_memtype() implies RAM page is in its
- * default state and not reserved, and hence of type WB
- */
- if (rettype == -1)
- rettype = _PAGE_CACHE_MODE_WB;
- return rettype;
+ page = pfn_to_page(paddr >> PAGE_SHIFT);
+ return get_page_memtype(page);
}
spin_lock(&memtype_lock);
@@ -623,13 +706,13 @@
u64 to = from + size;
u64 cursor = from;
- if (!pat_enabled)
+ if (!pat_enabled())
return 1;
while (cursor < to) {
if (!devmem_is_allowed(pfn)) {
- printk(KERN_INFO "Program %s tried to access /dev/mem between [mem %#010Lx-%#010Lx], PAT prevents it\n",
- current->comm, from, to - 1);
+ pr_info("x86/PAT: Program %s tried to access /dev/mem between [mem %#010Lx-%#010Lx], PAT prevents it\n",
+ current->comm, from, to - 1);
return 0;
}
cursor += PAGE_SIZE;
@@ -659,7 +742,7 @@
* caching for the high addresses through the KEN pin, but
* we maintain the tradition of paranoia in this code.
*/
- if (!pat_enabled &&
+ if (!pat_enabled() &&
!(boot_cpu_has(X86_FEATURE_MTRR) ||
boot_cpu_has(X86_FEATURE_K6_MTRR) ||
boot_cpu_has(X86_FEATURE_CYRIX_ARR) ||
@@ -698,8 +781,7 @@
size;
if (ioremap_change_attr((unsigned long)__va(base), id_sz, pcm) < 0) {
- printk(KERN_INFO "%s:%d ioremap_change_attr failed %s "
- "for [mem %#010Lx-%#010Lx]\n",
+ pr_info("x86/PAT: %s:%d ioremap_change_attr failed %s for [mem %#010Lx-%#010Lx]\n",
current->comm, current->pid,
cattr_name(pcm),
base, (unsigned long long)(base + size-1));
@@ -729,12 +811,12 @@
* the type requested matches the type of first page in the range.
*/
if (is_ram) {
- if (!pat_enabled)
+ if (!pat_enabled())
return 0;
pcm = lookup_memtype(paddr);
if (want_pcm != pcm) {
- printk(KERN_WARNING "%s:%d map pfn RAM range req %s for [mem %#010Lx-%#010Lx], got %s\n",
+ pr_warn("x86/PAT: %s:%d map pfn RAM range req %s for [mem %#010Lx-%#010Lx], got %s\n",
current->comm, current->pid,
cattr_name(want_pcm),
(unsigned long long)paddr,
@@ -755,13 +837,12 @@
if (strict_prot ||
!is_new_memtype_allowed(paddr, size, want_pcm, pcm)) {
free_memtype(paddr, paddr + size);
- printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
- " for [mem %#010Lx-%#010Lx], got %s\n",
- current->comm, current->pid,
- cattr_name(want_pcm),
- (unsigned long long)paddr,
- (unsigned long long)(paddr + size - 1),
- cattr_name(pcm));
+ pr_err("x86/PAT: %s:%d map pfn expected mapping type %s for [mem %#010Lx-%#010Lx], got %s\n",
+ current->comm, current->pid,
+ cattr_name(want_pcm),
+ (unsigned long long)paddr,
+ (unsigned long long)(paddr + size - 1),
+ cattr_name(pcm));
return -EINVAL;
}
/*
@@ -844,7 +925,7 @@
return ret;
}
- if (!pat_enabled)
+ if (!pat_enabled())
return 0;
/*
@@ -872,7 +953,7 @@
{
enum page_cache_mode pcm;
- if (!pat_enabled)
+ if (!pat_enabled())
return 0;
/* Set prot based on lookup */
@@ -913,14 +994,18 @@
pgprot_t pgprot_writecombine(pgprot_t prot)
{
- if (pat_enabled)
- return __pgprot(pgprot_val(prot) |
+ return __pgprot(pgprot_val(prot) |
cachemode2protval(_PAGE_CACHE_MODE_WC));
- else
- return pgprot_noncached(prot);
}
EXPORT_SYMBOL_GPL(pgprot_writecombine);
+pgprot_t pgprot_writethrough(pgprot_t prot)
+{
+ return __pgprot(pgprot_val(prot) |
+ cachemode2protval(_PAGE_CACHE_MODE_WT));
+}
+EXPORT_SYMBOL_GPL(pgprot_writethrough);
+
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
static struct memtype *memtype_get_idx(loff_t pos)
@@ -996,7 +1081,7 @@
static int __init pat_memtype_list_init(void)
{
- if (pat_enabled) {
+ if (pat_enabled()) {
debugfs_create_file("pat_memtype_list", S_IRUSR,
arch_debugfs_dir, NULL, &memtype_fops);
}
diff --git a/arch/x86/mm/pat_internal.h b/arch/x86/mm/pat_internal.h
index f641162..a739bfc 100644
--- a/arch/x86/mm/pat_internal.h
+++ b/arch/x86/mm/pat_internal.h
@@ -4,7 +4,7 @@
extern int pat_debug_enable;
#define dprintk(fmt, arg...) \
- do { if (pat_debug_enable) printk(KERN_INFO fmt, ##arg); } while (0)
+ do { if (pat_debug_enable) pr_info("x86/PAT: " fmt, ##arg); } while (0)
struct memtype {
u64 start;
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index 6582adc..6393108 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -160,9 +160,9 @@
return 0;
failure:
- printk(KERN_INFO "%s:%d conflicting memory types "
- "%Lx-%Lx %s<->%s\n", current->comm, current->pid, start,
- end, cattr_name(found_type), cattr_name(match->type));
+ pr_info("x86/PAT: %s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+ current->comm, current->pid, start, end,
+ cattr_name(found_type), cattr_name(match->type));
return -EBUSY;
}
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 0b97d2c..fb0a9dd 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -563,16 +563,31 @@
}
#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
+/**
+ * pud_set_huge - setup kernel PUD mapping
+ *
+ * MTRRs can override PAT memory types with 4KiB granularity. Therefore, this
+ * function sets up a huge page only if any of the following conditions are met:
+ *
+ * - MTRRs are disabled, or
+ *
+ * - MTRRs are enabled and the range is completely covered by a single MTRR, or
+ *
+ * - MTRRs are enabled and the corresponding MTRR memory type is WB, which
+ * has no effect on the requested PAT memory type.
+ *
+ * Callers should try to decrease page size (1GB -> 2MB -> 4K) if the bigger
+ * page mapping attempt fails.
+ *
+ * Returns 1 on success and 0 on failure.
+ */
int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
{
- u8 mtrr;
+ u8 mtrr, uniform;
- /*
- * Do not use a huge page when the range is covered by non-WB type
- * of MTRRs.
- */
- mtrr = mtrr_type_lookup(addr, addr + PUD_SIZE);
- if ((mtrr != MTRR_TYPE_WRBACK) && (mtrr != 0xFF))
+ mtrr = mtrr_type_lookup(addr, addr + PUD_SIZE, &uniform);
+ if ((mtrr != MTRR_TYPE_INVALID) && (!uniform) &&
+ (mtrr != MTRR_TYPE_WRBACK))
return 0;
prot = pgprot_4k_2_large(prot);
@@ -584,17 +599,24 @@
return 1;
}
+/**
+ * pmd_set_huge - setup kernel PMD mapping
+ *
+ * See text over pud_set_huge() above.
+ *
+ * Returns 1 on success and 0 on failure.
+ */
int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
{
- u8 mtrr;
+ u8 mtrr, uniform;
- /*
- * Do not use a huge page when the range is covered by non-WB type
- * of MTRRs.
- */
- mtrr = mtrr_type_lookup(addr, addr + PMD_SIZE);
- if ((mtrr != MTRR_TYPE_WRBACK) && (mtrr != 0xFF))
+ mtrr = mtrr_type_lookup(addr, addr + PMD_SIZE, &uniform);
+ if ((mtrr != MTRR_TYPE_INVALID) && (!uniform) &&
+ (mtrr != MTRR_TYPE_WRBACK)) {
+ pr_warn_once("%s: Cannot satisfy [mem %#010llx-%#010llx] with a huge-page mapping due to MTRR override.\n",
+ __func__, addr, addr + PMD_SIZE);
return 0;
+ }
prot = pgprot_4k_2_large(prot);
@@ -605,6 +627,11 @@
return 1;
}
+/**
+ * pud_clear_huge - clear kernel PUD mapping when it is set
+ *
+ * Returns 1 on success and 0 on failure (no PUD map is found).
+ */
int pud_clear_huge(pud_t *pud)
{
if (pud_large(*pud)) {
@@ -615,6 +642,11 @@
return 0;
}
+/**
+ * pmd_clear_huge - clear kernel PMD mapping when it is set
+ *
+ * Returns 1 on success and 0 on failure (no PMD map is found).
+ */
int pmd_clear_huge(pmd_t *pmd)
{
if (pmd_large(*pmd)) {
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 6440221..4093216 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -8,7 +8,6 @@
* of the License.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
/*
* Calling convention :
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 349c0d3..0a9f2ca 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -429,12 +429,12 @@
* Caller can followup with UC MINUS request and add a WC mtrr if there
* is a free mtrr slot.
*/
- if (!pat_enabled && write_combine)
+ if (!pat_enabled() && write_combine)
return -EINVAL;
- if (pat_enabled && write_combine)
+ if (pat_enabled() && write_combine)
prot |= cachemode2protval(_PAGE_CACHE_MODE_WC);
- else if (pat_enabled || boot_cpu_data.x86 > 3)
+ else if (pat_enabled() || boot_cpu_data.x86 > 3)
/*
* ioremap() and ioremap_nocache() defaults to UC MINUS for now.
* To avoid attribute conflicts, request UC MINUS here
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 852aa4c..2706230 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -208,6 +208,7 @@
static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
+ struct irq_alloc_info info;
int polarity;
if (dev->irq_managed && dev->irq > 0)
@@ -217,14 +218,13 @@
polarity = 0; /* active high */
else
polarity = 1; /* active low */
+ ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity);
/*
* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
- if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev)))
- return -EBUSY;
- if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
+ if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC, &info) < 0)
return -EBUSY;
dev->irq_managed = 1;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 5dc6ca5..9bd1154 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -146,19 +146,20 @@
/*
* Code for querying and setting of IRQ routes on various interrupt routers.
+ * PIC Edge/Level Control Registers (ELCR) 0x4d0 & 0x4d1.
*/
-void eisa_set_level_irq(unsigned int irq)
+void elcr_set_level_irq(unsigned int irq)
{
unsigned char mask = 1 << (irq & 7);
unsigned int port = 0x4d0 + (irq >> 3);
unsigned char val;
- static u16 eisa_irq_mask;
+ static u16 elcr_irq_mask;
- if (irq >= 16 || (1 << irq) & eisa_irq_mask)
+ if (irq >= 16 || (1 << irq) & elcr_irq_mask)
return;
- eisa_irq_mask |= (1 << irq);
+ elcr_irq_mask |= (1 << irq);
printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
val = inb(port);
if (!(val & mask)) {
@@ -965,11 +966,11 @@
} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
msg = "found";
- eisa_set_level_irq(irq);
+ elcr_set_level_irq(irq);
} else if (newirq && r->set &&
(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
- eisa_set_level_irq(newirq);
+ elcr_set_level_irq(newirq);
msg = "assigned";
irq = newirq;
}
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index a62e0be..f1a6c8e 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,4 +1,5 @@
# Platform specific code goes here
+obj-y += atom/
obj-y += ce4100/
obj-y += efi/
obj-y += geode/
diff --git a/arch/x86/platform/atom/Makefile b/arch/x86/platform/atom/Makefile
new file mode 100644
index 0000000..0a3a40c
--- /dev/null
+++ b/arch/x86/platform/atom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PUNIT_ATOM_DEBUG) += punit_atom_debug.o
diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c
new file mode 100644
index 0000000..5ca8ead
--- /dev/null
+++ b/arch/x86/platform/atom/punit_atom_debug.c
@@ -0,0 +1,183 @@
+/*
+ * Intel SOC Punit device state debug driver
+ * Punit controls power management for North Complex devices (Graphics
+ * blocks, Image Signal Processing, video processing, display, DSP etc.)
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+
+/* Side band Interface port */
+#define PUNIT_PORT 0x04
+/* Power gate status reg */
+#define PWRGT_STATUS 0x61
+/* Subsystem config/status Video processor */
+#define VED_SS_PM0 0x32
+/* Subsystem config/status ISP (Image Signal Processor) */
+#define ISP_SS_PM0 0x39
+/* Subsystem config/status Input/output controller */
+#define MIO_SS_PM 0x3B
+/* Shift bits for getting status for video, isp and i/o */
+#define SSS_SHIFT 24
+/* Shift bits for getting status for graphics rendering */
+#define RENDER_POS 0
+/* Shift bits for getting status for media control */
+#define MEDIA_POS 2
+/* Shift bits for getting status for Valley View/Baytrail display */
+#define VLV_DISPLAY_POS 6
+/* Subsystem config/status display for Cherry Trail SOC */
+#define CHT_DSP_SSS 0x36
+/* Shift bits for getting status for display */
+#define CHT_DSP_SSS_POS 16
+
+struct punit_device {
+ char *name;
+ int reg;
+ int sss_pos;
+};
+
+static const struct punit_device punit_device_byt[] = {
+ { "GFX RENDER", PWRGT_STATUS, RENDER_POS },
+ { "GFX MEDIA", PWRGT_STATUS, MEDIA_POS },
+ { "DISPLAY", PWRGT_STATUS, VLV_DISPLAY_POS },
+ { "VED", VED_SS_PM0, SSS_SHIFT },
+ { "ISP", ISP_SS_PM0, SSS_SHIFT },
+ { "MIO", MIO_SS_PM, SSS_SHIFT },
+ { NULL }
+};
+
+static const struct punit_device punit_device_cht[] = {
+ { "GFX RENDER", PWRGT_STATUS, RENDER_POS },
+ { "GFX MEDIA", PWRGT_STATUS, MEDIA_POS },
+ { "DISPLAY", CHT_DSP_SSS, CHT_DSP_SSS_POS },
+ { "VED", VED_SS_PM0, SSS_SHIFT },
+ { "ISP", ISP_SS_PM0, SSS_SHIFT },
+ { "MIO", MIO_SS_PM, SSS_SHIFT },
+ { NULL }
+};
+
+static const char * const dstates[] = {"D0", "D0i1", "D0i2", "D0i3"};
+
+static int punit_dev_state_show(struct seq_file *seq_file, void *unused)
+{
+ u32 punit_pwr_status;
+ struct punit_device *punit_devp = seq_file->private;
+ int index;
+ int status;
+
+ seq_puts(seq_file, "\n\nPUNIT NORTH COMPLEX DEVICES :\n");
+ while (punit_devp->name) {
+ status = iosf_mbi_read(PUNIT_PORT, BT_MBI_PMC_READ,
+ punit_devp->reg,
+ &punit_pwr_status);
+ if (status) {
+ seq_printf(seq_file, "%9s : Read Failed\n",
+ punit_devp->name);
+ } else {
+ index = (punit_pwr_status >> punit_devp->sss_pos) & 3;
+ seq_printf(seq_file, "%9s : %s\n", punit_devp->name,
+ dstates[index]);
+ }
+ punit_devp++;
+ }
+
+ return 0;
+}
+
+static int punit_dev_state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, punit_dev_state_show, inode->i_private);
+}
+
+static const struct file_operations punit_dev_state_ops = {
+ .open = punit_dev_state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *punit_dbg_file;
+
+static int punit_dbgfs_register(struct punit_device *punit_device)
+{
+ static struct dentry *dev_state;
+
+ punit_dbg_file = debugfs_create_dir("punit_atom", NULL);
+ if (!punit_dbg_file)
+ return -ENXIO;
+
+ dev_state = debugfs_create_file("dev_power_state", S_IFREG | S_IRUGO,
+ punit_dbg_file, punit_device,
+ &punit_dev_state_ops);
+ if (!dev_state) {
+ pr_err("punit_dev_state register failed\n");
+ debugfs_remove(punit_dbg_file);
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void punit_dbgfs_unregister(void)
+{
+ debugfs_remove_recursive(punit_dbg_file);
+}
+
+#define ICPU(model, drv_data) \
+ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT,\
+ (kernel_ulong_t)&drv_data }
+
+static const struct x86_cpu_id intel_punit_cpu_ids[] = {
+ ICPU(55, punit_device_byt), /* Valleyview, Bay Trail */
+ ICPU(76, punit_device_cht), /* Braswell, Cherry Trail */
+ {}
+};
+
+MODULE_DEVICE_TABLE(x86cpu, intel_punit_cpu_ids);
+
+static int __init punit_atom_debug_init(void)
+{
+ const struct x86_cpu_id *id;
+ int ret;
+
+ id = x86_match_cpu(intel_punit_cpu_ids);
+ if (!id)
+ return -ENODEV;
+
+ ret = punit_dbgfs_register((struct punit_device *)id->driver_data);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void __exit punit_atom_debug_exit(void)
+{
+ punit_dbgfs_unregister();
+}
+
+module_init(punit_atom_debug_init);
+module_exit(punit_atom_debug_exit);
+
+MODULE_AUTHOR("Kumar P, Mahesh <mahesh.kumar.p@intel.com>");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Driver for Punit devices states debugging");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c b/arch/x86/platform/intel-mid/device_libs/platform_wdt.c
index 0b283d4..de73413 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_wdt.c
@@ -27,6 +27,7 @@
static int tangier_probe(struct platform_device *pdev)
{
int gsi;
+ struct irq_alloc_info info;
struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
if (!pdata)
@@ -34,8 +35,8 @@
/* IOAPIC builds identity mapping between GSI and IRQ on MID */
gsi = pdata->irq;
- if (mp_set_gsi_attr(gsi, 1, 0, cpu_to_node(0)) ||
- mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC) <= 0) {
+ ioapic_set_alloc_attr(&info, cpu_to_node(0), 1, 0);
+ if (mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info) <= 0) {
dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n",
gsi);
return -EINVAL;
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 3005f0c..01d54ea 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -81,26 +81,34 @@
return 0;
}
+static void __init intel_mid_setup_bp_timer(void)
+{
+ apbt_time_init();
+ setup_boot_APIC_clock();
+}
+
static void __init intel_mid_time_init(void)
{
sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
+
switch (intel_mid_timer_options) {
case INTEL_MID_TIMER_APBT_ONLY:
break;
case INTEL_MID_TIMER_LAPIC_APBT:
- x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+ /* Use apbt and local apic */
+ x86_init.timers.setup_percpu_clockev = intel_mid_setup_bp_timer;
x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
- break;
+ return;
default:
if (!boot_cpu_has(X86_FEATURE_ARAT))
break;
+ /* Lapic only, no apbt */
x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
return;
}
- /* we need at least one APB timer */
- pre_init_apic_IRQ0();
- apbt_time_init();
+
+ x86_init.timers.setup_percpu_clockev = apbt_time_init;
}
static void intel_mid_arch_setup(void)
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index c14ad34..ce992e8 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -95,18 +95,16 @@
pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
totallen, (u32)pentry->phys_addr,
pentry->freq_hz, pentry->irq);
- if (!pentry->irq)
- continue;
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
- mp_irq.irqflag = 5;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ /* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+ mp_irq.irqflag = 5;
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL);
}
return 0;
@@ -177,7 +175,7 @@
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
mp_save_irq(&mp_irq);
- mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL);
}
return 0;
}
@@ -436,6 +434,7 @@
struct devs_id *dev = NULL;
int num, i, ret;
int polarity;
+ struct irq_alloc_info info;
sb = (struct sfi_table_simple *)table;
num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
@@ -469,9 +468,8 @@
polarity = 1;
}
- ret = mp_set_gsi_attr(irq, 1, polarity, NUMA_NO_NODE);
- if (ret == 0)
- ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC);
+ ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, polarity);
+ ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC, &info);
WARN_ON(ret < 0);
}
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index 2a8a74f..6c7111b 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -25,8 +25,8 @@
#include <linux/init.h>
#include <linux/sfi.h>
#include <linux/io.h>
-#include <linux/irqdomain.h>
+#include <asm/irqdomain.h>
#include <asm/io_apic.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
@@ -71,9 +71,6 @@
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
-static struct irq_domain_ops sfi_ioapic_irqdomain_ops = {
- .map = mp_irqdomain_map,
-};
static int __init sfi_parse_ioapic(struct sfi_table_header *table)
{
@@ -82,7 +79,7 @@
int i, num;
struct ioapic_domain_cfg cfg = {
.type = IOAPIC_DOMAIN_STRICT,
- .ops = &sfi_ioapic_irqdomain_ops,
+ .ops = &mp_ioapic_irqdomain_ops,
};
sb = (struct sfi_table_simple *)table;
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 0ce6736..8570abe 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -13,22 +13,37 @@
#include <linux/slab.h>
#include <linux/irq.h>
+#include <asm/irqdomain.h>
#include <asm/apic.h>
#include <asm/uv/uv_irq.h>
#include <asm/uv/uv_hub.h>
/* MMR offset and pnode of hub sourcing interrupts for a given irq */
-struct uv_irq_2_mmr_pnode{
- struct rb_node list;
+struct uv_irq_2_mmr_pnode {
unsigned long offset;
int pnode;
- int irq;
};
-static DEFINE_SPINLOCK(uv_irq_lock);
-static struct rb_root uv_irq_root;
+static void uv_program_mmr(struct irq_cfg *cfg, struct uv_irq_2_mmr_pnode *info)
+{
+ unsigned long mmr_value;
+ struct uv_IO_APIC_route_entry *entry;
-static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool);
+ BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
+ sizeof(unsigned long));
+
+ mmr_value = 0;
+ entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+ entry->vector = cfg->vector;
+ entry->delivery_mode = apic->irq_delivery_mode;
+ entry->dest_mode = apic->irq_dest_mode;
+ entry->polarity = 0;
+ entry->trigger = 0;
+ entry->mask = 0;
+ entry->dest = cfg->dest_apicid;
+
+ uv_write_global_mmr64(info->pnode, info->offset, mmr_value);
+}
static void uv_noop(struct irq_data *data) { }
@@ -37,6 +52,23 @@
ack_APIC_irq();
}
+static int
+uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask,
+ bool force)
+{
+ struct irq_data *parent = data->parent_data;
+ struct irq_cfg *cfg = irqd_cfg(data);
+ int ret;
+
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ if (ret >= 0) {
+ uv_program_mmr(cfg, data->chip_data);
+ send_cleanup_vector(cfg);
+ }
+
+ return ret;
+}
+
static struct irq_chip uv_irq_chip = {
.name = "UV-CORE",
.irq_mask = uv_noop,
@@ -45,189 +77,99 @@
.irq_set_affinity = uv_set_irq_affinity,
};
-/*
- * Add offset and pnode information of the hub sourcing interrupts to the
- * rb tree for a specific irq.
- */
-static int uv_set_irq_2_mmr_info(int irq, unsigned long offset, unsigned blade)
+static int uv_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
{
- struct rb_node **link = &uv_irq_root.rb_node;
- struct rb_node *parent = NULL;
- struct uv_irq_2_mmr_pnode *n;
- struct uv_irq_2_mmr_pnode *e;
- unsigned long irqflags;
+ struct uv_irq_2_mmr_pnode *chip_data;
+ struct irq_alloc_info *info = arg;
+ struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
+ int ret;
- n = kmalloc_node(sizeof(struct uv_irq_2_mmr_pnode), GFP_KERNEL,
- uv_blade_to_memory_nid(blade));
- if (!n)
+ if (nr_irqs > 1 || !info || info->type != X86_IRQ_ALLOC_TYPE_UV)
+ return -EINVAL;
+
+ chip_data = kmalloc_node(sizeof(*chip_data), GFP_KERNEL,
+ irq_data->node);
+ if (!chip_data)
return -ENOMEM;
- n->irq = irq;
- n->offset = offset;
- n->pnode = uv_blade_to_pnode(blade);
- spin_lock_irqsave(&uv_irq_lock, irqflags);
- /* Find the right place in the rbtree: */
- while (*link) {
- parent = *link;
- e = rb_entry(parent, struct uv_irq_2_mmr_pnode, list);
-
- if (unlikely(irq == e->irq)) {
- /* irq entry exists */
- e->pnode = uv_blade_to_pnode(blade);
- e->offset = offset;
- spin_unlock_irqrestore(&uv_irq_lock, irqflags);
- kfree(n);
- return 0;
- }
-
- if (irq < e->irq)
- link = &(*link)->rb_left;
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+ if (ret >= 0) {
+ if (info->uv_limit == UV_AFFINITY_CPU)
+ irq_set_status_flags(virq, IRQ_NO_BALANCING);
else
- link = &(*link)->rb_right;
+ irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
+
+ chip_data->pnode = uv_blade_to_pnode(info->uv_blade);
+ chip_data->offset = info->uv_offset;
+ irq_domain_set_info(domain, virq, virq, &uv_irq_chip, chip_data,
+ handle_percpu_irq, NULL, info->uv_name);
+ } else {
+ kfree(chip_data);
}
- /* Insert the node into the rbtree. */
- rb_link_node(&n->list, parent, link);
- rb_insert_color(&n->list, &uv_irq_root);
-
- spin_unlock_irqrestore(&uv_irq_lock, irqflags);
- return 0;
+ return ret;
}
-/* Retrieve offset and pnode information from the rb tree for a specific irq */
-int uv_irq_2_mmr_info(int irq, unsigned long *offset, int *pnode)
+static void uv_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
{
- struct uv_irq_2_mmr_pnode *e;
- struct rb_node *n;
- unsigned long irqflags;
+ struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
- spin_lock_irqsave(&uv_irq_lock, irqflags);
- n = uv_irq_root.rb_node;
- while (n) {
- e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
-
- if (e->irq == irq) {
- *offset = e->offset;
- *pnode = e->pnode;
- spin_unlock_irqrestore(&uv_irq_lock, irqflags);
- return 0;
- }
-
- if (irq < e->irq)
- n = n->rb_left;
- else
- n = n->rb_right;
- }
- spin_unlock_irqrestore(&uv_irq_lock, irqflags);
- return -1;
+ BUG_ON(nr_irqs != 1);
+ kfree(irq_data->chip_data);
+ irq_clear_status_flags(virq, IRQ_MOVE_PCNTXT);
+ irq_clear_status_flags(virq, IRQ_NO_BALANCING);
+ irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
/*
* Re-target the irq to the specified CPU and enable the specified MMR located
* on the specified blade to allow the sending of MSIs to the specified CPU.
*/
-static int
-arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
- unsigned long mmr_offset, int limit)
+static void uv_domain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data)
{
- const struct cpumask *eligible_cpu = cpumask_of(cpu);
- struct irq_cfg *cfg = irq_cfg(irq);
- unsigned long mmr_value;
- struct uv_IO_APIC_route_entry *entry;
- int mmr_pnode, err;
- unsigned int dest;
-
- BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
- sizeof(unsigned long));
-
- err = assign_irq_vector(irq, cfg, eligible_cpu);
- if (err != 0)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(eligible_cpu, eligible_cpu, &dest);
- if (err != 0)
- return err;
-
- if (limit == UV_AFFINITY_CPU)
- irq_set_status_flags(irq, IRQ_NO_BALANCING);
- else
- irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
-
- irq_set_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
- irq_name);
-
- mmr_value = 0;
- entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
- entry->vector = cfg->vector;
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->polarity = 0;
- entry->trigger = 0;
- entry->mask = 0;
- entry->dest = dest;
-
- mmr_pnode = uv_blade_to_pnode(mmr_blade);
- uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-
- if (cfg->move_in_progress)
- send_cleanup_vector(cfg);
-
- return irq;
+ uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data);
}
/*
* Disable the specified MMR located on the specified blade so that MSIs are
* longer allowed to be sent.
*/
-static void arch_disable_uv_irq(int mmr_pnode, unsigned long mmr_offset)
+static void uv_domain_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data)
{
unsigned long mmr_value;
struct uv_IO_APIC_route_entry *entry;
- BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
- sizeof(unsigned long));
-
mmr_value = 0;
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
entry->mask = 1;
-
- uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+ uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data);
}
-static int
-uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
+static const struct irq_domain_ops uv_domain_ops = {
+ .alloc = uv_domain_alloc,
+ .free = uv_domain_free,
+ .activate = uv_domain_activate,
+ .deactivate = uv_domain_deactivate,
+};
+
+static struct irq_domain *uv_get_irq_domain(void)
{
- struct irq_cfg *cfg = irqd_cfg(data);
- unsigned int dest;
- unsigned long mmr_value, mmr_offset;
- struct uv_IO_APIC_route_entry *entry;
- int mmr_pnode;
+ static struct irq_domain *uv_domain;
+ static DEFINE_MUTEX(uv_lock);
- if (apic_set_affinity(data, mask, &dest))
- return -1;
+ mutex_lock(&uv_lock);
+ if (uv_domain == NULL) {
+ uv_domain = irq_domain_add_tree(NULL, &uv_domain_ops, NULL);
+ if (uv_domain)
+ uv_domain->parent = x86_vector_domain;
+ }
+ mutex_unlock(&uv_lock);
- mmr_value = 0;
- entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-
- entry->vector = cfg->vector;
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->polarity = 0;
- entry->trigger = 0;
- entry->mask = 0;
- entry->dest = dest;
-
- /* Get previously stored MMR and pnode of hub sourcing interrupts */
- if (uv_irq_2_mmr_info(data->irq, &mmr_offset, &mmr_pnode))
- return -1;
-
- uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-
- if (cfg->move_in_progress)
- send_cleanup_vector(cfg);
-
- return IRQ_SET_MASK_OK_NOCOPY;
+ return uv_domain;
}
/*
@@ -238,19 +180,21 @@
int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
unsigned long mmr_offset, int limit)
{
- int ret, irq = irq_alloc_hwirq(uv_blade_to_memory_nid(mmr_blade));
+ struct irq_alloc_info info;
+ struct irq_domain *domain = uv_get_irq_domain();
- if (!irq)
- return -EBUSY;
+ if (!domain)
+ return -ENOMEM;
- ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset,
- limit);
- if (ret == irq)
- uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade);
- else
- irq_free_hwirq(irq);
+ init_irq_alloc_info(&info, cpumask_of(cpu));
+ info.type = X86_IRQ_ALLOC_TYPE_UV;
+ info.uv_limit = limit;
+ info.uv_blade = mmr_blade;
+ info.uv_offset = mmr_offset;
+ info.uv_name = irq_name;
- return ret;
+ return irq_domain_alloc_irqs(domain, 1,
+ uv_blade_to_memory_nid(mmr_blade), &info);
}
EXPORT_SYMBOL_GPL(uv_setup_irq);
@@ -263,26 +207,6 @@
*/
void uv_teardown_irq(unsigned int irq)
{
- struct uv_irq_2_mmr_pnode *e;
- struct rb_node *n;
- unsigned long irqflags;
-
- spin_lock_irqsave(&uv_irq_lock, irqflags);
- n = uv_irq_root.rb_node;
- while (n) {
- e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
- if (e->irq == irq) {
- arch_disable_uv_irq(e->pnode, e->offset);
- rb_erase(n, &uv_irq_root);
- kfree(e);
- break;
- }
- if (irq < e->irq)
- n = n->rb_left;
- else
- n = n->rb_right;
- }
- spin_unlock_irqrestore(&uv_irq_lock, irqflags);
- irq_free_hwirq(irq);
+ irq_domain_free_irqs(irq, 1);
}
EXPORT_SYMBOL_GPL(uv_teardown_irq);
diff --git a/arch/x86/power/hibernate_asm_64.S b/arch/x86/power/hibernate_asm_64.S
index 3c4469a..e2386cb 100644
--- a/arch/x86/power/hibernate_asm_64.S
+++ b/arch/x86/power/hibernate_asm_64.S
@@ -78,9 +78,9 @@
/* code below has been relocated to a safe page */
ENTRY(core_restore_code)
-loop:
+.Lloop:
testq %rdx, %rdx
- jz done
+ jz .Ldone
/* get addresses from the pbe and copy the page */
movq pbe_address(%rdx), %rsi
@@ -91,8 +91,8 @@
/* progress to the next pbe */
movq pbe_next(%rdx), %rdx
- jmp loop
-done:
+ jmp .Lloop
+.Ldone:
/* jump to the restore_registers address from the image header */
jmpq *%rax
/*
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
index acb384d..a8fecc2 100644
--- a/arch/x86/um/Makefile
+++ b/arch/x86/um/Makefile
@@ -26,7 +26,7 @@
obj-y += syscalls_64.o vdso/
-subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../lib/thunk_64.o \
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o \
../lib/rwsem.o
endif
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 98088bf..0b95c9b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1181,10 +1181,11 @@
.read_tscp = native_read_tscp,
.iret = xen_iret,
- .irq_enable_sysexit = xen_sysexit,
#ifdef CONFIG_X86_64
.usergs_sysret32 = xen_sysret32,
.usergs_sysret64 = xen_sysret64,
+#else
+ .irq_enable_sysexit = xen_sysexit,
#endif
.load_tr_desc = paravirt_nop,
@@ -1467,6 +1468,7 @@
{
struct physdev_set_iopl set_iopl;
unsigned long initrd_start = 0;
+ u64 pat;
int rc;
if (!xen_start_info)
@@ -1574,8 +1576,8 @@
* Modify the cache mode translation tables to match Xen's PAT
* configuration.
*/
-
- pat_init_cache_modes();
+ rdmsrl(MSR_IA32_CR_PAT, pat);
+ pat_init_cache_modes(pat);
/* keep using Xen gdt for now; no urgent need to change it */
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index b47124d..8b7f18e 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -67,6 +67,7 @@
#include <linux/seq_file.h>
#include <linux/bootmem.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <asm/cache.h>
#include <asm/setup.h>
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 985fc3e..f22667a 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -15,6 +15,8 @@
#include <asm/percpu.h>
#include <asm/processor-flags.h>
#include <asm/segment.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
#include <xen/interface/xen.h>
@@ -47,29 +49,13 @@
ENDPATCH(xen_iret)
RELOC(xen_iret, 1b+1)
-/*
- * sysexit is not used for 64-bit processes, so it's only ever used to
- * return to 32-bit compat userspace.
- */
-ENTRY(xen_sysexit)
- pushq $__USER32_DS
- pushq %rcx
- pushq $X86_EFLAGS_IF
- pushq $__USER32_CS
- pushq %rdx
-
- pushq $0
-1: jmp hypercall_iret
-ENDPATCH(xen_sysexit)
-RELOC(xen_sysexit, 1b+1)
-
ENTRY(xen_sysret64)
/*
* We're already on the usermode stack at this point, but
* still with the kernel gs, so we can easily switch back
*/
movq %rsp, PER_CPU_VAR(rsp_scratch)
- movq PER_CPU_VAR(kernel_stack), %rsp
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
pushq $__USER_DS
pushq PER_CPU_VAR(rsp_scratch)
@@ -88,7 +74,7 @@
* still with the kernel gs, so we can easily switch back
*/
movq %rsp, PER_CPU_VAR(rsp_scratch)
- movq PER_CPU_VAR(kernel_stack), %rsp
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
pushq $__USER32_DS
pushq PER_CPU_VAR(rsp_scratch)
@@ -128,7 +114,7 @@
/* Normal 64-bit system call target */
ENTRY(xen_syscall_target)
undo_xen_syscall
- jmp system_call_after_swapgs
+ jmp entry_SYSCALL_64_after_swapgs
ENDPROC(xen_syscall_target)
#ifdef CONFIG_IA32_EMULATION
@@ -136,13 +122,13 @@
/* 32-bit compat syscall target */
ENTRY(xen_syscall32_target)
undo_xen_syscall
- jmp ia32_cstar_target
+ jmp entry_SYSCALL_compat
ENDPROC(xen_syscall32_target)
/* 32-bit compat sysenter target */
ENTRY(xen_sysenter_target)
undo_xen_syscall
- jmp ia32_sysenter_target
+ jmp entry_SYSENTER_compat
ENDPROC(xen_sysenter_target)
#else /* !CONFIG_IA32_EMULATION */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 9e195c6..c20fe29 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -134,7 +134,9 @@
/* These are not functions, and cannot be called normally */
__visible void xen_iret(void);
+#ifdef CONFIG_X86_32
__visible void xen_sysexit(void);
+#endif
__visible void xen_sysret32(void);
__visible void xen_sysret64(void);
__visible void xen_adjust_exception_frame(void);
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index fe1600a..c39bb6e 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -59,6 +59,7 @@
}
#define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
{
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index ed65e9c..3670bba 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -35,6 +35,7 @@
#include <linux/nmi.h>
#include <linux/hardirq.h>
#include <linux/pstore.h>
+#include <linux/vmalloc.h>
#include <acpi/apei.h>
#include "apei-internal.h"
diff --git a/drivers/block/pmem.c b/drivers/block/pmem.c
index eabf4a8..095dfaa 100644
--- a/drivers/block/pmem.c
+++ b/drivers/block/pmem.c
@@ -139,11 +139,11 @@
}
/*
- * Map the memory as non-cachable, as we can't write back the contents
+ * Map the memory as write-through, as we can't write back the contents
* of the CPU caches in case of a crash.
*/
err = -ENOMEM;
- pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
+ pmem->virt_addr = ioremap_wt(pmem->phys_addr, pmem->size);
if (!pmem->virt_addr)
goto out_release_region;
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 6414661..2ba53f4 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -26,6 +26,7 @@
#include <linux/fs.h>
#include <linux/debugfs.h>
#include <linux/acpi.h>
+#include <linux/vmalloc.h>
#include <trace/events/power.h>
#include <asm/div64.h>
diff --git a/drivers/dma/mic_x100_dma.c b/drivers/dma/mic_x100_dma.c
index 6de2e67..74d9db0 100644
--- a/drivers/dma/mic_x100_dma.c
+++ b/drivers/dma/mic_x100_dma.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/seq_file.h>
+#include <linux/vmalloc.h>
#include "mic_x100_dma.h"
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 266dcd6..0a95782 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -36,9 +36,6 @@
#include <linux/pci.h>
#include <linux/export.h>
-#ifdef CONFIG_X86
-#include <asm/mtrr.h>
-#endif
static int drm_version(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -197,16 +194,7 @@
map->type = r_list->map->type;
map->flags = r_list->map->flags;
map->handle = (void *)(unsigned long) r_list->user_token;
-
-#ifdef CONFIG_X86
- /*
- * There appears to be exactly one user of the mtrr index: dritest.
- * It's easy enough to keep it working on non-PAT systems.
- */
- map->mtrr = phys_wc_to_mtrr_index(r_list->map->mtrr);
-#else
- map->mtrr = -1;
-#endif
+ map->mtrr = arch_phys_wc_index(r_list->map->mtrr);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
index 1d9bb11..8fe54ff 100644
--- a/drivers/infiniband/hw/ipath/Kconfig
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -9,3 +9,6 @@
as IP-over-InfiniBand as well as with userspace applications
(in conjunction with InfiniBand userspace access).
For QLogic PCIe QLE based cards, use the QIB driver instead.
+
+ If you have this hardware you will need to boot with PAT disabled
+ on your x86-64 systems, use the nopat kernel parameter.
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index bd0caed..2d7e503 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -42,6 +42,9 @@
#include <linux/bitmap.h>
#include <linux/slab.h>
#include <linux/module.h>
+#ifdef CONFIG_X86_64
+#include <asm/pat.h>
+#endif
#include "ipath_kernel.h"
#include "ipath_verbs.h"
@@ -395,6 +398,14 @@
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
+#ifdef CONFIG_X86_64
+ if (WARN(pat_enabled(),
+ "ipath needs PAT disabled, boot with nopat kernel parameter\n")) {
+ ret = -ENODEV;
+ goto bail;
+ }
+#endif
+
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
ret = PTR_ERR(dd);
@@ -542,6 +553,7 @@
dd->ipath_kregbase = __ioremap(addr, len,
(_PAGE_NO_CACHE|_PAGE_WRITETHRU));
#else
+ /* XXX: split this properly to enable on PAT */
dd->ipath_kregbase = ioremap_nocache(addr, len);
#endif
@@ -587,12 +599,8 @@
ret = ipath_enable_wc(dd);
- if (ret) {
- ipath_dev_err(dd, "Write combining not enabled "
- "(err %d): performance may be poor\n",
- -ret);
+ if (ret)
ret = 0;
- }
ipath_verify_pioperf(dd);
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index e08db70..f0f9471 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -463,9 +463,7 @@
/* offset in HT config space of slave/primary interface block */
u8 ipath_ht_slave_off;
/* for write combining settings */
- unsigned long ipath_wc_cookie;
- unsigned long ipath_wc_base;
- unsigned long ipath_wc_len;
+ int wc_cookie;
/* ref count for each pkey */
atomic_t ipath_pkeyrefs[4];
/* shadow copy of struct page *'s for exp tid pages */
diff --git a/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
index 4ad0b93..7b6e4c8 100644
--- a/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
+++ b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
@@ -37,7 +37,6 @@
*/
#include <linux/pci.h>
-#include <asm/mtrr.h>
#include <asm/processor.h>
#include "ipath_kernel.h"
@@ -122,27 +121,14 @@
}
if (!ret) {
- int cookie;
- ipath_cdbg(VERBOSE, "Setting mtrr for chip to WC "
- "(addr %llx, len=0x%llx)\n",
- (unsigned long long) pioaddr,
- (unsigned long long) piolen);
- cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
- if (cookie < 0) {
- {
- dev_info(&dd->pcidev->dev,
- "mtrr_add() WC for PIO bufs "
- "failed (%d)\n",
- cookie);
- ret = -EINVAL;
- }
- } else {
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC, "
- "cookie is %d\n", cookie);
- dd->ipath_wc_cookie = cookie;
- dd->ipath_wc_base = (unsigned long) pioaddr;
- dd->ipath_wc_len = (unsigned long) piolen;
- }
+ dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
+ if (dd->wc_cookie < 0) {
+ ipath_dev_err(dd, "Seting mtrr failed on PIO buffers\n");
+ ret = -ENODEV;
+ } else if (dd->wc_cookie == 0)
+ ipath_cdbg(VERBOSE, "Set mtrr for chip to WC not needed\n");
+ else
+ ipath_cdbg(VERBOSE, "Set mtrr for chip to WC\n");
}
return ret;
@@ -154,16 +140,5 @@
*/
void ipath_disable_wc(struct ipath_devdata *dd)
{
- if (dd->ipath_wc_cookie) {
- int r;
- ipath_cdbg(VERBOSE, "undoing WCCOMB on pio buffers\n");
- r = mtrr_del(dd->ipath_wc_cookie, dd->ipath_wc_base,
- dd->ipath_wc_len);
- if (r < 0)
- dev_info(&dd->pcidev->dev,
- "mtrr_del(%lx, %lx, %lx) failed: %d\n",
- dd->ipath_wc_cookie, dd->ipath_wc_base,
- dd->ipath_wc_len, r);
- dd->ipath_wc_cookie = 0; /* even on failure */
- }
+ arch_phys_wc_del(dd->wc_cookie);
}
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index e1c7e9e..fffea87 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -34,6 +34,7 @@
#include <linux/irq.h>
#include <linux/msi.h>
#include <linux/dma-contiguous.h>
+#include <linux/irqdomain.h>
#include <asm/irq_remapping.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
@@ -3852,6 +3853,21 @@
} fields;
};
+struct irq_2_irte {
+ u16 devid; /* Device ID for IRTE table */
+ u16 index; /* Index into IRTE table*/
+};
+
+struct amd_ir_data {
+ struct irq_2_irte irq_2_irte;
+ union irte irte_entry;
+ union {
+ struct msi_msg msi_entry;
+ };
+};
+
+static struct irq_chip amd_ir_chip;
+
#define DTE_IRQ_PHYS_ADDR_MASK (((1ULL << 45)-1) << 6)
#define DTE_IRQ_REMAP_INTCTL (2ULL << 60)
#define DTE_IRQ_TABLE_LEN (8ULL << 1)
@@ -3945,7 +3961,7 @@
return table;
}
-static int alloc_irq_index(struct irq_cfg *cfg, u16 devid, int count)
+static int alloc_irq_index(u16 devid, int count)
{
struct irq_remap_table *table;
unsigned long flags;
@@ -3967,18 +3983,10 @@
c = 0;
if (c == count) {
- struct irq_2_irte *irte_info;
-
for (; c != 0; --c)
table->table[index - c + 1] = IRTE_ALLOCATED;
index -= count - 1;
-
- cfg->remapped = 1;
- irte_info = &cfg->irq_2_irte;
- irte_info->devid = devid;
- irte_info->index = index;
-
goto out;
}
}
@@ -3991,22 +3999,6 @@
return index;
}
-static int get_irte(u16 devid, int index, union irte *irte)
-{
- struct irq_remap_table *table;
- unsigned long flags;
-
- table = get_irq_table(devid, false);
- if (!table)
- return -ENOMEM;
-
- spin_lock_irqsave(&table->lock, flags);
- irte->val = table->table[index];
- spin_unlock_irqrestore(&table->lock, flags);
-
- return 0;
-}
-
static int modify_irte(u16 devid, int index, union irte irte)
{
struct irq_remap_table *table;
@@ -4053,229 +4045,70 @@
iommu_completion_wait(iommu);
}
-static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
+static int get_devid(struct irq_alloc_info *info)
{
- struct irq_remap_table *table;
- struct irq_2_irte *irte_info;
- struct irq_cfg *cfg;
- union irte irte;
- int ioapic_id;
- int index;
- int devid;
- int ret;
+ int devid = -1;
- cfg = irq_cfg(irq);
- if (!cfg)
- return -EINVAL;
-
- irte_info = &cfg->irq_2_irte;
- ioapic_id = mpc_ioapic_id(attr->ioapic);
- devid = get_ioapic_devid(ioapic_id);
-
- if (devid < 0)
- return devid;
-
- table = get_irq_table(devid, true);
- if (table == NULL)
- return -ENOMEM;
-
- index = attr->ioapic_pin;
-
- /* Setup IRQ remapping info */
- cfg->remapped = 1;
- irte_info->devid = devid;
- irte_info->index = index;
-
- /* Setup IRTE for IOMMU */
- irte.val = 0;
- irte.fields.vector = vector;
- irte.fields.int_type = apic->irq_delivery_mode;
- irte.fields.destination = destination;
- irte.fields.dm = apic->irq_dest_mode;
- irte.fields.valid = 1;
-
- ret = modify_irte(devid, index, irte);
- if (ret)
- return ret;
-
- /* Setup IOAPIC entry */
- memset(entry, 0, sizeof(*entry));
-
- entry->vector = index;
- entry->mask = 0;
- entry->trigger = attr->trigger;
- entry->polarity = attr->polarity;
-
- /*
- * Mask level triggered irqs.
- */
- if (attr->trigger)
- entry->mask = 1;
-
- return 0;
-}
-
-static int set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
-{
- struct irq_2_irte *irte_info;
- unsigned int dest, irq;
- struct irq_cfg *cfg;
- union irte irte;
- int err;
-
- if (!config_enabled(CONFIG_SMP))
- return -1;
-
- cfg = irqd_cfg(data);
- irq = data->irq;
- irte_info = &cfg->irq_2_irte;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return -EINVAL;
-
- if (get_irte(irte_info->devid, irte_info->index, &irte))
- return -EBUSY;
-
- if (assign_irq_vector(irq, cfg, mask))
- return -EBUSY;
-
- err = apic->cpu_mask_to_apicid_and(cfg->domain, mask, &dest);
- if (err) {
- if (assign_irq_vector(irq, cfg, data->affinity))
- pr_err("AMD-Vi: Failed to recover vector for irq %d\n", irq);
- return err;
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_IOAPIC:
+ devid = get_ioapic_devid(info->ioapic_id);
+ break;
+ case X86_IRQ_ALLOC_TYPE_HPET:
+ devid = get_hpet_devid(info->hpet_id);
+ break;
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ devid = get_device_id(&info->msi_dev->dev);
+ break;
+ default:
+ BUG_ON(1);
+ break;
}
- irte.fields.vector = cfg->vector;
- irte.fields.destination = dest;
-
- modify_irte(irte_info->devid, irte_info->index, irte);
-
- if (cfg->move_in_progress)
- send_cleanup_vector(cfg);
-
- cpumask_copy(data->affinity, mask);
-
- return 0;
+ return devid;
}
-static int free_irq(int irq)
+static struct irq_domain *get_ir_irq_domain(struct irq_alloc_info *info)
{
- struct irq_2_irte *irte_info;
- struct irq_cfg *cfg;
+ struct amd_iommu *iommu;
+ int devid;
- cfg = irq_cfg(irq);
- if (!cfg)
- return -EINVAL;
+ if (!info)
+ return NULL;
- irte_info = &cfg->irq_2_irte;
+ devid = get_devid(info);
+ if (devid >= 0) {
+ iommu = amd_iommu_rlookup_table[devid];
+ if (iommu)
+ return iommu->ir_domain;
+ }
- free_irte(irte_info->devid, irte_info->index);
-
- return 0;
+ return NULL;
}
-static void compose_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
+static struct irq_domain *get_irq_domain(struct irq_alloc_info *info)
{
- struct irq_2_irte *irte_info;
- struct irq_cfg *cfg;
- union irte irte;
+ struct amd_iommu *iommu;
+ int devid;
- cfg = irq_cfg(irq);
- if (!cfg)
- return;
+ if (!info)
+ return NULL;
- irte_info = &cfg->irq_2_irte;
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ devid = get_device_id(&info->msi_dev->dev);
+ if (devid >= 0) {
+ iommu = amd_iommu_rlookup_table[devid];
+ if (iommu)
+ return iommu->msi_domain;
+ }
+ break;
+ default:
+ break;
+ }
- irte.val = 0;
- irte.fields.vector = cfg->vector;
- irte.fields.int_type = apic->irq_delivery_mode;
- irte.fields.destination = dest;
- irte.fields.dm = apic->irq_dest_mode;
- irte.fields.valid = 1;
-
- modify_irte(irte_info->devid, irte_info->index, irte);
-
- msg->address_hi = MSI_ADDR_BASE_HI;
- msg->address_lo = MSI_ADDR_BASE_LO;
- msg->data = irte_info->index;
-}
-
-static int msi_alloc_irq(struct pci_dev *pdev, int irq, int nvec)
-{
- struct irq_cfg *cfg;
- int index;
- u16 devid;
-
- if (!pdev)
- return -EINVAL;
-
- cfg = irq_cfg(irq);
- if (!cfg)
- return -EINVAL;
-
- devid = get_device_id(&pdev->dev);
- index = alloc_irq_index(cfg, devid, nvec);
-
- return index < 0 ? MAX_IRQS_PER_TABLE : index;
-}
-
-static int msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int offset)
-{
- struct irq_2_irte *irte_info;
- struct irq_cfg *cfg;
- u16 devid;
-
- if (!pdev)
- return -EINVAL;
-
- cfg = irq_cfg(irq);
- if (!cfg)
- return -EINVAL;
-
- if (index >= MAX_IRQS_PER_TABLE)
- return 0;
-
- devid = get_device_id(&pdev->dev);
- irte_info = &cfg->irq_2_irte;
-
- cfg->remapped = 1;
- irte_info->devid = devid;
- irte_info->index = index + offset;
-
- return 0;
-}
-
-static int alloc_hpet_msi(unsigned int irq, unsigned int id)
-{
- struct irq_2_irte *irte_info;
- struct irq_cfg *cfg;
- int index, devid;
-
- cfg = irq_cfg(irq);
- if (!cfg)
- return -EINVAL;
-
- irte_info = &cfg->irq_2_irte;
- devid = get_hpet_devid(id);
- if (devid < 0)
- return devid;
-
- index = alloc_irq_index(cfg, devid, 1);
- if (index < 0)
- return index;
-
- cfg->remapped = 1;
- irte_info->devid = devid;
- irte_info->index = index;
-
- return 0;
+ return NULL;
}
struct irq_remap_ops amd_iommu_irq_ops = {
@@ -4284,12 +4117,244 @@
.disable = amd_iommu_disable,
.reenable = amd_iommu_reenable,
.enable_faulting = amd_iommu_enable_faulting,
- .setup_ioapic_entry = setup_ioapic_entry,
- .set_affinity = set_affinity,
- .free_irq = free_irq,
- .compose_msi_msg = compose_msi_msg,
- .msi_alloc_irq = msi_alloc_irq,
- .msi_setup_irq = msi_setup_irq,
- .alloc_hpet_msi = alloc_hpet_msi,
+ .get_ir_irq_domain = get_ir_irq_domain,
+ .get_irq_domain = get_irq_domain,
};
+
+static void irq_remapping_prepare_irte(struct amd_ir_data *data,
+ struct irq_cfg *irq_cfg,
+ struct irq_alloc_info *info,
+ int devid, int index, int sub_handle)
+{
+ struct irq_2_irte *irte_info = &data->irq_2_irte;
+ struct msi_msg *msg = &data->msi_entry;
+ union irte *irte = &data->irte_entry;
+ struct IO_APIC_route_entry *entry;
+
+ data->irq_2_irte.devid = devid;
+ data->irq_2_irte.index = index + sub_handle;
+
+ /* Setup IRTE for IOMMU */
+ irte->val = 0;
+ irte->fields.vector = irq_cfg->vector;
+ irte->fields.int_type = apic->irq_delivery_mode;
+ irte->fields.destination = irq_cfg->dest_apicid;
+ irte->fields.dm = apic->irq_dest_mode;
+ irte->fields.valid = 1;
+
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_IOAPIC:
+ /* Setup IOAPIC entry */
+ entry = info->ioapic_entry;
+ info->ioapic_entry = NULL;
+ memset(entry, 0, sizeof(*entry));
+ entry->vector = index;
+ entry->mask = 0;
+ entry->trigger = info->ioapic_trigger;
+ entry->polarity = info->ioapic_polarity;
+ /* Mask level triggered irqs. */
+ if (info->ioapic_trigger)
+ entry->mask = 1;
+ break;
+
+ case X86_IRQ_ALLOC_TYPE_HPET:
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ msg->address_hi = MSI_ADDR_BASE_HI;
+ msg->address_lo = MSI_ADDR_BASE_LO;
+ msg->data = irte_info->index;
+ break;
+
+ default:
+ BUG_ON(1);
+ break;
+ }
+}
+
+static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct irq_alloc_info *info = arg;
+ struct irq_data *irq_data;
+ struct amd_ir_data *data;
+ struct irq_cfg *cfg;
+ int i, ret, devid;
+ int index = -1;
+
+ if (!info)
+ return -EINVAL;
+ if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI &&
+ info->type != X86_IRQ_ALLOC_TYPE_MSIX)
+ return -EINVAL;
+
+ /*
+ * With IRQ remapping enabled, don't need contiguous CPU vectors
+ * to support multiple MSI interrupts.
+ */
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+
+ devid = get_devid(info);
+ if (devid < 0)
+ return -EINVAL;
+
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+ if (ret < 0)
+ return ret;
+
+ ret = -ENOMEM;
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto out_free_parent;
+
+ if (info->type == X86_IRQ_ALLOC_TYPE_IOAPIC) {
+ if (get_irq_table(devid, true))
+ index = info->ioapic_pin;
+ else
+ ret = -ENOMEM;
+ } else {
+ index = alloc_irq_index(devid, nr_irqs);
+ }
+ if (index < 0) {
+ pr_warn("Failed to allocate IRTE\n");
+ kfree(data);
+ goto out_free_parent;
+ }
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ cfg = irqd_cfg(irq_data);
+ if (!irq_data || !cfg) {
+ ret = -EINVAL;
+ goto out_free_data;
+ }
+
+ if (i > 0) {
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto out_free_data;
+ }
+ irq_data->hwirq = (devid << 16) + i;
+ irq_data->chip_data = data;
+ irq_data->chip = &amd_ir_chip;
+ irq_remapping_prepare_irte(data, cfg, info, devid, index, i);
+ irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
+ }
+ return 0;
+
+out_free_data:
+ for (i--; i >= 0; i--) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ if (irq_data)
+ kfree(irq_data->chip_data);
+ }
+ for (i = 0; i < nr_irqs; i++)
+ free_irte(devid, index + i);
+out_free_parent:
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+ return ret;
+}
+
+static void irq_remapping_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_2_irte *irte_info;
+ struct irq_data *irq_data;
+ struct amd_ir_data *data;
+ int i;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ if (irq_data && irq_data->chip_data) {
+ data = irq_data->chip_data;
+ irte_info = &data->irq_2_irte;
+ free_irte(irte_info->devid, irte_info->index);
+ kfree(data);
+ }
+ }
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static void irq_remapping_activate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ struct amd_ir_data *data = irq_data->chip_data;
+ struct irq_2_irte *irte_info = &data->irq_2_irte;
+
+ modify_irte(irte_info->devid, irte_info->index, data->irte_entry);
+}
+
+static void irq_remapping_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ struct amd_ir_data *data = irq_data->chip_data;
+ struct irq_2_irte *irte_info = &data->irq_2_irte;
+ union irte entry;
+
+ entry.val = 0;
+ modify_irte(irte_info->devid, irte_info->index, data->irte_entry);
+}
+
+static struct irq_domain_ops amd_ir_domain_ops = {
+ .alloc = irq_remapping_alloc,
+ .free = irq_remapping_free,
+ .activate = irq_remapping_activate,
+ .deactivate = irq_remapping_deactivate,
+};
+
+static int amd_ir_set_affinity(struct irq_data *data,
+ const struct cpumask *mask, bool force)
+{
+ struct amd_ir_data *ir_data = data->chip_data;
+ struct irq_2_irte *irte_info = &ir_data->irq_2_irte;
+ struct irq_cfg *cfg = irqd_cfg(data);
+ struct irq_data *parent = data->parent_data;
+ int ret;
+
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+ return ret;
+
+ /*
+ * Atomically updates the IRTE with the new destination, vector
+ * and flushes the interrupt entry cache.
+ */
+ ir_data->irte_entry.fields.vector = cfg->vector;
+ ir_data->irte_entry.fields.destination = cfg->dest_apicid;
+ modify_irte(irte_info->devid, irte_info->index, ir_data->irte_entry);
+
+ /*
+ * After this point, all the interrupts will start arriving
+ * at the new destination. So, time to cleanup the previous
+ * vector allocation.
+ */
+ send_cleanup_vector(cfg);
+
+ return IRQ_SET_MASK_OK_DONE;
+}
+
+static void ir_compose_msi_msg(struct irq_data *irq_data, struct msi_msg *msg)
+{
+ struct amd_ir_data *ir_data = irq_data->chip_data;
+
+ *msg = ir_data->msi_entry;
+}
+
+static struct irq_chip amd_ir_chip = {
+ .irq_ack = ir_ack_apic_edge,
+ .irq_set_affinity = amd_ir_set_affinity,
+ .irq_compose_msi_msg = ir_compose_msi_msg,
+};
+
+int amd_iommu_create_irq_domain(struct amd_iommu *iommu)
+{
+ iommu->ir_domain = irq_domain_add_tree(NULL, &amd_ir_domain_ops, iommu);
+ if (!iommu->ir_domain)
+ return -ENOMEM;
+
+ iommu->ir_domain->parent = arch_get_ir_parent_domain();
+ iommu->msi_domain = arch_create_msi_irq_domain(iommu->ir_domain);
+
+ return 0;
+}
#endif
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 450ef50..c17df04 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1124,6 +1124,10 @@
if (ret)
return ret;
+ ret = amd_iommu_create_irq_domain(iommu);
+ if (ret)
+ return ret;
+
/*
* Make sure IOMMU is not considered to translate itself. The IVRS
* table tells us so, but this is a lie!
diff --git a/drivers/iommu/amd_iommu_proto.h b/drivers/iommu/amd_iommu_proto.h
index 72b0fd4..0a21142 100644
--- a/drivers/iommu/amd_iommu_proto.h
+++ b/drivers/iommu/amd_iommu_proto.h
@@ -62,6 +62,15 @@
extern int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
u64 *value, bool is_write);
+#ifdef CONFIG_IRQ_REMAP
+extern int amd_iommu_create_irq_domain(struct amd_iommu *iommu);
+#else
+static inline int amd_iommu_create_irq_domain(struct amd_iommu *iommu)
+{
+ return 0;
+}
+#endif
+
#define PPR_SUCCESS 0x0
#define PPR_INVALID 0x1
#define PPR_FAILURE 0xf
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 05030e5..6533e87 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -398,6 +398,7 @@
struct iommu_domain;
+struct irq_domain;
/*
* This structure contains generic data for IOMMU protection domains
@@ -579,6 +580,10 @@
/* The maximum PC banks and counters/bank (PCSup=1) */
u8 max_banks;
u8 max_counters;
+#ifdef CONFIG_IRQ_REMAP
+ struct irq_domain *ir_domain;
+ struct irq_domain *msi_domain;
+#endif
};
struct devid_map {
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 9847613..536f2d8 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1087,8 +1087,8 @@
if (iommu->irq) {
free_irq(iommu->irq, iommu);
- irq_set_handler_data(iommu->irq, NULL);
dmar_free_hwirq(iommu->irq);
+ iommu->irq = 0;
}
if (iommu->qi) {
@@ -1642,23 +1642,14 @@
if (iommu->irq)
return 0;
- irq = dmar_alloc_hwirq();
- if (irq <= 0) {
+ irq = dmar_alloc_hwirq(iommu->seq_id, iommu->node, iommu);
+ if (irq > 0) {
+ iommu->irq = irq;
+ } else {
pr_err("IOMMU: no free vectors\n");
return -EINVAL;
}
- irq_set_handler_data(irq, iommu);
- iommu->irq = irq;
-
- ret = arch_setup_dmar_msi(irq);
- if (ret) {
- irq_set_handler_data(irq, NULL);
- iommu->irq = 0;
- dmar_free_hwirq(irq);
- return ret;
- }
-
ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
if (ret)
pr_err("IOMMU: can't request irq\n");
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 5709ae9..80f1d14 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -8,6 +8,7 @@
#include <linux/irq.h>
#include <linux/intel-iommu.h>
#include <linux/acpi.h>
+#include <linux/irqdomain.h>
#include <asm/io_apic.h>
#include <asm/smp.h>
#include <asm/cpu.h>
@@ -17,6 +18,11 @@
#include "irq_remapping.h"
+enum irq_mode {
+ IRQ_REMAPPING,
+ IRQ_POSTING,
+};
+
struct ioapic_scope {
struct intel_iommu *iommu;
unsigned int id;
@@ -31,6 +37,22 @@
unsigned int devfn;
};
+struct irq_2_iommu {
+ struct intel_iommu *iommu;
+ u16 irte_index;
+ u16 sub_handle;
+ u8 irte_mask;
+ enum irq_mode mode;
+};
+
+struct intel_ir_data {
+ struct irq_2_iommu irq_2_iommu;
+ struct irte irte_entry;
+ union {
+ struct msi_msg msi_entry;
+ };
+};
+
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
#define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8)
@@ -50,43 +72,14 @@
* the dmar_global_lock.
*/
static DEFINE_RAW_SPINLOCK(irq_2_ir_lock);
+static struct irq_domain_ops intel_ir_domain_ops;
static int __init parse_ioapics_under_ir(void);
-static struct irq_2_iommu *irq_2_iommu(unsigned int irq)
-{
- struct irq_cfg *cfg = irq_cfg(irq);
- return cfg ? &cfg->irq_2_iommu : NULL;
-}
-
-static int get_irte(int irq, struct irte *entry)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- unsigned long flags;
- int index;
-
- if (!entry || !irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
- if (unlikely(!irq_iommu->iommu)) {
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
- return -1;
- }
-
- index = irq_iommu->irte_index + irq_iommu->sub_handle;
- *entry = *(irq_iommu->iommu->ir_table->base + index);
-
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
- return 0;
-}
-
-static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+static int alloc_irte(struct intel_iommu *iommu, int irq,
+ struct irq_2_iommu *irq_iommu, u16 count)
{
struct ir_table *table = iommu->ir_table;
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- struct irq_cfg *cfg = irq_cfg(irq);
unsigned int mask = 0;
unsigned long flags;
int index;
@@ -113,11 +106,11 @@
if (index < 0) {
pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id);
} else {
- cfg->remapped = 1;
irq_iommu->iommu = iommu;
irq_iommu->irte_index = index;
irq_iommu->sub_handle = 0;
irq_iommu->irte_mask = mask;
+ irq_iommu->mode = IRQ_REMAPPING;
}
raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
@@ -135,47 +128,9 @@
return qi_submit_sync(&desc, iommu);
}
-static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+static int modify_irte(struct irq_2_iommu *irq_iommu,
+ struct irte *irte_modified)
{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- unsigned long flags;
- int index;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
- *sub_handle = irq_iommu->sub_handle;
- index = irq_iommu->irte_index;
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
- return index;
-}
-
-static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- struct irq_cfg *cfg = irq_cfg(irq);
- unsigned long flags;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
- cfg->remapped = 1;
- irq_iommu->iommu = iommu;
- irq_iommu->irte_index = index;
- irq_iommu->sub_handle = subhandle;
- irq_iommu->irte_mask = 0;
-
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-
- return 0;
-}
-
-static int modify_irte(int irq, struct irte *irte_modified)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
struct intel_iommu *iommu;
unsigned long flags;
struct irte *irte;
@@ -196,6 +151,9 @@
__iommu_flush_cache(iommu, irte, sizeof(*irte));
rc = qi_flush_iec(iommu, index, 0);
+
+ /* Update iommu mode according to the IRTE mode */
+ irq_iommu->mode = irte->pst ? IRQ_POSTING : IRQ_REMAPPING;
raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
return rc;
@@ -242,7 +200,7 @@
return 0;
iommu = irq_iommu->iommu;
- index = irq_iommu->irte_index + irq_iommu->sub_handle;
+ index = irq_iommu->irte_index;
start = iommu->ir_table->base + index;
end = start + (1 << irq_iommu->irte_mask);
@@ -257,29 +215,6 @@
return qi_flush_iec(iommu, index, irq_iommu->irte_mask);
}
-static int free_irte(int irq)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- unsigned long flags;
- int rc;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
- rc = clear_entries(irq_iommu);
-
- irq_iommu->iommu = NULL;
- irq_iommu->irte_index = 0;
- irq_iommu->sub_handle = 0;
- irq_iommu->irte_mask = 0;
-
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-
- return rc;
-}
-
/*
* source validation type
*/
@@ -488,7 +423,6 @@
pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO,
INTR_REMAP_PAGE_ORDER);
-
if (!pages) {
pr_err("IR%d: failed to allocate pages of order %d\n",
iommu->seq_id, INTR_REMAP_PAGE_ORDER);
@@ -502,11 +436,23 @@
goto out_free_pages;
}
+ iommu->ir_domain = irq_domain_add_hierarchy(arch_get_ir_parent_domain(),
+ 0, INTR_REMAP_TABLE_ENTRIES,
+ NULL, &intel_ir_domain_ops,
+ iommu);
+ if (!iommu->ir_domain) {
+ pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
+ goto out_free_bitmap;
+ }
+ iommu->ir_msi_domain = arch_create_msi_irq_domain(iommu->ir_domain);
+
ir_table->base = page_address(pages);
ir_table->bitmap = bitmap;
iommu->ir_table = ir_table;
return 0;
+out_free_bitmap:
+ kfree(bitmap);
out_free_pages:
__free_pages(pages, INTR_REMAP_PAGE_ORDER);
out_free_table:
@@ -517,6 +463,14 @@
static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
{
if (iommu && iommu->ir_table) {
+ if (iommu->ir_msi_domain) {
+ irq_domain_remove(iommu->ir_msi_domain);
+ iommu->ir_msi_domain = NULL;
+ }
+ if (iommu->ir_domain) {
+ irq_domain_remove(iommu->ir_domain);
+ iommu->ir_domain = NULL;
+ }
free_pages((unsigned long)iommu->ir_table->base,
INTR_REMAP_PAGE_ORDER);
kfree(iommu->ir_table->bitmap);
@@ -627,6 +581,26 @@
return -ENODEV;
}
+/*
+ * Set Posted-Interrupts capability.
+ */
+static inline void set_irq_posting_cap(void)
+{
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu;
+
+ if (!disable_irq_post) {
+ intel_irq_remap_ops.capability |= 1 << IRQ_POSTING_CAP;
+
+ for_each_iommu(iommu, drhd)
+ if (!cap_pi_support(iommu->cap)) {
+ intel_irq_remap_ops.capability &=
+ ~(1 << IRQ_POSTING_CAP);
+ break;
+ }
+ }
+}
+
static int __init intel_enable_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
@@ -702,12 +676,7 @@
irq_remapping_enabled = 1;
- /*
- * VT-d has a different layout for IO-APIC entries when
- * interrupt remapping is enabled. So it needs a special routine
- * to print IO-APIC entries for debugging purposes too.
- */
- x86_io_apic_ops.print_entries = intel_ir_io_apic_print_entries;
+ set_irq_posting_cap();
pr_info("Enabled IRQ remapping in %s mode\n", eim ? "x2apic" : "xapic");
@@ -909,6 +878,12 @@
iommu_disable_irq_remapping(iommu);
}
+
+ /*
+ * Clear Posted-Interrupts capability.
+ */
+ if (!disable_irq_post)
+ intel_irq_remap_ops.capability &= ~(1 << IRQ_POSTING_CAP);
}
static int reenable_irq_remapping(int eim)
@@ -936,6 +911,8 @@
if (!setup)
goto error;
+ set_irq_posting_cap();
+
return 0;
error:
@@ -945,8 +922,7 @@
return -1;
}
-static void prepare_irte(struct irte *irte, int vector,
- unsigned int dest)
+static void prepare_irte(struct irte *irte, int vector, unsigned int dest)
{
memset(irte, 0, sizeof(*irte));
@@ -966,76 +942,63 @@
irte->redir_hint = 1;
}
-static int intel_setup_ioapic_entry(int irq,
- struct IO_APIC_route_entry *route_entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
+static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
{
- int ioapic_id = mpc_ioapic_id(attr->ioapic);
- struct intel_iommu *iommu;
- struct IR_IO_APIC_route_entry *entry;
- struct irte irte;
- int index;
+ struct intel_iommu *iommu = NULL;
- down_read(&dmar_global_lock);
- iommu = map_ioapic_to_ir(ioapic_id);
- if (!iommu) {
- pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
- index = -ENODEV;
- } else {
- index = alloc_irte(iommu, irq, 1);
- if (index < 0) {
- pr_warn("Failed to allocate IRTE for ioapic %d\n",
- ioapic_id);
- index = -ENOMEM;
- }
+ if (!info)
+ return NULL;
+
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_IOAPIC:
+ iommu = map_ioapic_to_ir(info->ioapic_id);
+ break;
+ case X86_IRQ_ALLOC_TYPE_HPET:
+ iommu = map_hpet_to_ir(info->hpet_id);
+ break;
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ iommu = map_dev_to_ir(info->msi_dev);
+ break;
+ default:
+ BUG_ON(1);
+ break;
}
- up_read(&dmar_global_lock);
- if (index < 0)
- return index;
- prepare_irte(&irte, vector, destination);
-
- /* Set source-id of interrupt request */
- set_ioapic_sid(&irte, ioapic_id);
-
- modify_irte(irq, &irte);
-
- apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
- "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
- "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
- "Avail:%X Vector:%02X Dest:%08X "
- "SID:%04X SQ:%X SVT:%X)\n",
- attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
- irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
- irte.avail, irte.vector, irte.dest_id,
- irte.sid, irte.sq, irte.svt);
-
- entry = (struct IR_IO_APIC_route_entry *)route_entry;
- memset(entry, 0, sizeof(*entry));
-
- entry->index2 = (index >> 15) & 0x1;
- entry->zero = 0;
- entry->format = 1;
- entry->index = (index & 0x7fff);
- /*
- * IO-APIC RTE will be configured with virtual vector.
- * irq handler will do the explicit EOI to the io-apic.
- */
- entry->vector = attr->ioapic_pin;
- entry->mask = 0; /* enable IRQ */
- entry->trigger = attr->trigger;
- entry->polarity = attr->polarity;
-
- /* Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
- */
- if (attr->trigger)
- entry->mask = 1;
-
- return 0;
+ return iommu ? iommu->ir_domain : NULL;
}
+static struct irq_domain *intel_get_irq_domain(struct irq_alloc_info *info)
+{
+ struct intel_iommu *iommu;
+
+ if (!info)
+ return NULL;
+
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ iommu = map_dev_to_ir(info->msi_dev);
+ if (iommu)
+ return iommu->ir_msi_domain;
+ break;
+ default:
+ break;
+ }
+
+ return NULL;
+}
+
+struct irq_remap_ops intel_irq_remap_ops = {
+ .prepare = intel_prepare_irq_remapping,
+ .enable = intel_enable_irq_remapping,
+ .disable = disable_irq_remapping,
+ .reenable = reenable_irq_remapping,
+ .enable_faulting = enable_drhd_fault_handling,
+ .get_ir_irq_domain = intel_get_ir_irq_domain,
+ .get_irq_domain = intel_get_irq_domain,
+};
+
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
@@ -1051,170 +1014,282 @@
* is used to migrate MSI irq's in the presence of interrupt-remapping.
*/
static int
-intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
+intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask,
+ bool force)
{
+ struct intel_ir_data *ir_data = data->chip_data;
+ struct irte *irte = &ir_data->irte_entry;
struct irq_cfg *cfg = irqd_cfg(data);
- unsigned int dest, irq = data->irq;
- struct irte irte;
- int err;
+ struct irq_data *parent = data->parent_data;
+ int ret;
- if (!config_enabled(CONFIG_SMP))
- return -EINVAL;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return -EINVAL;
-
- if (get_irte(irq, &irte))
- return -EBUSY;
-
- err = assign_irq_vector(irq, cfg, mask);
- if (err)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(cfg->domain, mask, &dest);
- if (err) {
- if (assign_irq_vector(irq, cfg, data->affinity))
- pr_err("Failed to recover vector for irq %d\n", irq);
- return err;
- }
-
- irte.vector = cfg->vector;
- irte.dest_id = IRTE_DEST(dest);
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+ return ret;
/*
* Atomically updates the IRTE with the new destination, vector
* and flushes the interrupt entry cache.
*/
- modify_irte(irq, &irte);
+ irte->vector = cfg->vector;
+ irte->dest_id = IRTE_DEST(cfg->dest_apicid);
+
+ /* Update the hardware only if the interrupt is in remapped mode. */
+ if (ir_data->irq_2_iommu.mode == IRQ_REMAPPING)
+ modify_irte(&ir_data->irq_2_iommu, irte);
/*
* After this point, all the interrupts will start arriving
* at the new destination. So, time to cleanup the previous
* vector allocation.
*/
- if (cfg->move_in_progress)
- send_cleanup_vector(cfg);
+ send_cleanup_vector(cfg);
- cpumask_copy(data->affinity, mask);
+ return IRQ_SET_MASK_OK_DONE;
+}
+
+static void intel_ir_compose_msi_msg(struct irq_data *irq_data,
+ struct msi_msg *msg)
+{
+ struct intel_ir_data *ir_data = irq_data->chip_data;
+
+ *msg = ir_data->msi_entry;
+}
+
+static int intel_ir_set_vcpu_affinity(struct irq_data *data, void *info)
+{
+ struct intel_ir_data *ir_data = data->chip_data;
+ struct vcpu_data *vcpu_pi_info = info;
+
+ /* stop posting interrupts, back to remapping mode */
+ if (!vcpu_pi_info) {
+ modify_irte(&ir_data->irq_2_iommu, &ir_data->irte_entry);
+ } else {
+ struct irte irte_pi;
+
+ /*
+ * We are not caching the posted interrupt entry. We
+ * copy the data from the remapped entry and modify
+ * the fields which are relevant for posted mode. The
+ * cached remapped entry is used for switching back to
+ * remapped mode.
+ */
+ memset(&irte_pi, 0, sizeof(irte_pi));
+ dmar_copy_shared_irte(&irte_pi, &ir_data->irte_entry);
+
+ /* Update the posted mode fields */
+ irte_pi.p_pst = 1;
+ irte_pi.p_urgent = 0;
+ irte_pi.p_vector = vcpu_pi_info->vector;
+ irte_pi.pda_l = (vcpu_pi_info->pi_desc_addr >>
+ (32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT);
+ irte_pi.pda_h = (vcpu_pi_info->pi_desc_addr >> 32) &
+ ~(-1UL << PDA_HIGH_BIT);
+
+ modify_irte(&ir_data->irq_2_iommu, &irte_pi);
+ }
+
return 0;
}
-static void intel_compose_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
+static struct irq_chip intel_ir_chip = {
+ .irq_ack = ir_ack_apic_edge,
+ .irq_set_affinity = intel_ir_set_affinity,
+ .irq_compose_msi_msg = intel_ir_compose_msi_msg,
+ .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity,
+};
+
+static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
+ struct irq_cfg *irq_cfg,
+ struct irq_alloc_info *info,
+ int index, int sub_handle)
{
- struct irq_cfg *cfg;
- struct irte irte;
- u16 sub_handle = 0;
- int ir_index;
+ struct IR_IO_APIC_route_entry *entry;
+ struct irte *irte = &data->irte_entry;
+ struct msi_msg *msg = &data->msi_entry;
- cfg = irq_cfg(irq);
+ prepare_irte(irte, irq_cfg->vector, irq_cfg->dest_apicid);
+ switch (info->type) {
+ case X86_IRQ_ALLOC_TYPE_IOAPIC:
+ /* Set source-id of interrupt request */
+ set_ioapic_sid(irte, info->ioapic_id);
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set IRTE entry (P:%d FPD:%d Dst_Mode:%d Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X Avail:%X Vector:%02X Dest:%08X SID:%04X SQ:%X SVT:%X)\n",
+ info->ioapic_id, irte->present, irte->fpd,
+ irte->dst_mode, irte->redir_hint,
+ irte->trigger_mode, irte->dlvry_mode,
+ irte->avail, irte->vector, irte->dest_id,
+ irte->sid, irte->sq, irte->svt);
- ir_index = map_irq_to_irte_handle(irq, &sub_handle);
- BUG_ON(ir_index == -1);
+ entry = (struct IR_IO_APIC_route_entry *)info->ioapic_entry;
+ info->ioapic_entry = NULL;
+ memset(entry, 0, sizeof(*entry));
+ entry->index2 = (index >> 15) & 0x1;
+ entry->zero = 0;
+ entry->format = 1;
+ entry->index = (index & 0x7fff);
+ /*
+ * IO-APIC RTE will be configured with virtual vector.
+ * irq handler will do the explicit EOI to the io-apic.
+ */
+ entry->vector = info->ioapic_pin;
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = info->ioapic_trigger;
+ entry->polarity = info->ioapic_polarity;
+ if (info->ioapic_trigger)
+ entry->mask = 1; /* Mask level triggered irqs. */
+ break;
- prepare_irte(&irte, cfg->vector, dest);
+ case X86_IRQ_ALLOC_TYPE_HPET:
+ case X86_IRQ_ALLOC_TYPE_MSI:
+ case X86_IRQ_ALLOC_TYPE_MSIX:
+ if (info->type == X86_IRQ_ALLOC_TYPE_HPET)
+ set_hpet_sid(irte, info->hpet_id);
+ else
+ set_msi_sid(irte, info->msi_dev);
- /* Set source-id of interrupt request */
- if (pdev)
- set_msi_sid(&irte, pdev);
- else
- set_hpet_sid(&irte, hpet_id);
+ msg->address_hi = MSI_ADDR_BASE_HI;
+ msg->data = sub_handle;
+ msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+ MSI_ADDR_IR_SHV |
+ MSI_ADDR_IR_INDEX1(index) |
+ MSI_ADDR_IR_INDEX2(index);
+ break;
- modify_irte(irq, &irte);
-
- msg->address_hi = MSI_ADDR_BASE_HI;
- msg->data = sub_handle;
- msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
- MSI_ADDR_IR_SHV |
- MSI_ADDR_IR_INDEX1(ir_index) |
- MSI_ADDR_IR_INDEX2(ir_index);
+ default:
+ BUG_ON(1);
+ break;
+ }
}
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
+static void intel_free_irq_resources(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
{
- struct intel_iommu *iommu;
- int index;
+ struct irq_data *irq_data;
+ struct intel_ir_data *data;
+ struct irq_2_iommu *irq_iommu;
+ unsigned long flags;
+ int i;
- down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(dev);
- if (!iommu) {
- printk(KERN_ERR
- "Unable to map PCI %s to iommu\n", pci_name(dev));
- index = -ENOENT;
- } else {
- index = alloc_irte(iommu, irq, nvec);
- if (index < 0) {
- printk(KERN_ERR
- "Unable to allocate %d IRTE for PCI %s\n",
- nvec, pci_name(dev));
- index = -ENOSPC;
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ if (irq_data && irq_data->chip_data) {
+ data = irq_data->chip_data;
+ irq_iommu = &data->irq_2_iommu;
+ raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
+ clear_entries(irq_iommu);
+ raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
+ irq_domain_reset_irq_data(irq_data);
+ kfree(data);
}
}
- up_read(&dmar_global_lock);
-
- return index;
}
-static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
+static int intel_irq_remapping_alloc(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs,
+ void *arg)
{
- struct intel_iommu *iommu;
- int ret = -ENOENT;
+ struct intel_iommu *iommu = domain->host_data;
+ struct irq_alloc_info *info = arg;
+ struct intel_ir_data *data, *ird;
+ struct irq_data *irq_data;
+ struct irq_cfg *irq_cfg;
+ int i, ret, index;
+
+ if (!info || !iommu)
+ return -EINVAL;
+ if (nr_irqs > 1 && info->type != X86_IRQ_ALLOC_TYPE_MSI &&
+ info->type != X86_IRQ_ALLOC_TYPE_MSIX)
+ return -EINVAL;
+
+ /*
+ * With IRQ remapping enabled, don't need contiguous CPU vectors
+ * to support multiple MSI interrupts.
+ */
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+ if (ret < 0)
+ return ret;
+
+ ret = -ENOMEM;
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto out_free_parent;
down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(pdev);
- if (iommu) {
- /*
- * setup the mapping between the irq and the IRTE
- * base index, the sub_handle pointing to the
- * appropriate interrupt remap table entry.
- */
- set_irte_irq(irq, iommu, index, sub_handle);
- ret = 0;
- }
+ index = alloc_irte(iommu, virq, &data->irq_2_iommu, nr_irqs);
up_read(&dmar_global_lock);
+ if (index < 0) {
+ pr_warn("Failed to allocate IRTE\n");
+ kfree(data);
+ goto out_free_parent;
+ }
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+ irq_cfg = irqd_cfg(irq_data);
+ if (!irq_data || !irq_cfg) {
+ ret = -EINVAL;
+ goto out_free_data;
+ }
+
+ if (i > 0) {
+ ird = kzalloc(sizeof(*ird), GFP_KERNEL);
+ if (!ird)
+ goto out_free_data;
+ /* Initialize the common data */
+ ird->irq_2_iommu = data->irq_2_iommu;
+ ird->irq_2_iommu.sub_handle = i;
+ } else {
+ ird = data;
+ }
+
+ irq_data->hwirq = (index << 16) + i;
+ irq_data->chip_data = ird;
+ irq_data->chip = &intel_ir_chip;
+ intel_irq_remapping_prepare_irte(ird, irq_cfg, info, index, i);
+ irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
+ }
+ return 0;
+
+out_free_data:
+ intel_free_irq_resources(domain, virq, i);
+out_free_parent:
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
return ret;
}
-static int intel_alloc_hpet_msi(unsigned int irq, unsigned int id)
+static void intel_irq_remapping_free(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
{
- int ret = -1;
- struct intel_iommu *iommu;
- int index;
-
- down_read(&dmar_global_lock);
- iommu = map_hpet_to_ir(id);
- if (iommu) {
- index = alloc_irte(iommu, irq, 1);
- if (index >= 0)
- ret = 0;
- }
- up_read(&dmar_global_lock);
-
- return ret;
+ intel_free_irq_resources(domain, virq, nr_irqs);
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
-struct irq_remap_ops intel_irq_remap_ops = {
- .prepare = intel_prepare_irq_remapping,
- .enable = intel_enable_irq_remapping,
- .disable = disable_irq_remapping,
- .reenable = reenable_irq_remapping,
- .enable_faulting = enable_drhd_fault_handling,
- .setup_ioapic_entry = intel_setup_ioapic_entry,
- .set_affinity = intel_ioapic_set_affinity,
- .free_irq = free_irte,
- .compose_msi_msg = intel_compose_msi_msg,
- .msi_alloc_irq = intel_msi_alloc_irq,
- .msi_setup_irq = intel_msi_setup_irq,
- .alloc_hpet_msi = intel_alloc_hpet_msi,
+static void intel_irq_remapping_activate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ struct intel_ir_data *data = irq_data->chip_data;
+
+ modify_irte(&data->irq_2_iommu, &data->irte_entry);
+}
+
+static void intel_irq_remapping_deactivate(struct irq_domain *domain,
+ struct irq_data *irq_data)
+{
+ struct intel_ir_data *data = irq_data->chip_data;
+ struct irte entry;
+
+ memset(&entry, 0, sizeof(entry));
+ modify_irte(&data->irq_2_iommu, &entry);
+}
+
+static struct irq_domain_ops intel_ir_domain_ops = {
+ .alloc = intel_irq_remapping_alloc,
+ .free = intel_irq_remapping_free,
+ .activate = intel_irq_remapping_activate,
+ .deactivate = intel_irq_remapping_deactivate,
};
/*
@@ -1280,6 +1355,9 @@
return -EINVAL;
if (!ecap_ir_support(iommu->ecap))
return 0;
+ if (irq_remapping_cap(IRQ_POSTING_CAP) &&
+ !cap_pi_support(iommu->cap))
+ return -EBUSY;
if (insert) {
if (!iommu->ir_table)
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 390079e..2d99930 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -6,6 +6,7 @@
#include <linux/msi.h>
#include <linux/irq.h>
#include <linux/pci.h>
+#include <linux/irqdomain.h>
#include <asm/hw_irq.h>
#include <asm/irq_remapping.h>
@@ -21,21 +22,11 @@
int disable_sourceid_checking;
int no_x2apic_optout;
+int disable_irq_post = 1;
+
static int disable_irq_remap;
static struct irq_remap_ops *remap_ops;
-static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
-static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle);
-static int set_remapped_irq_affinity(struct irq_data *data,
- const struct cpumask *mask,
- bool force);
-
-static bool irq_remapped(struct irq_cfg *cfg)
-{
- return (cfg->remapped == 1);
-}
-
static void irq_remapping_disable_io_apic(void)
{
/*
@@ -49,117 +40,9 @@
disconnect_bsp_APIC(0);
}
-static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
-{
- int ret, sub_handle, nvec_pow2, index = 0;
- unsigned int irq;
- struct msi_desc *msidesc;
-
- msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
-
- irq = irq_alloc_hwirqs(nvec, dev_to_node(&dev->dev));
- if (irq == 0)
- return -ENOSPC;
-
- nvec_pow2 = __roundup_pow_of_two(nvec);
- for (sub_handle = 0; sub_handle < nvec; sub_handle++) {
- if (!sub_handle) {
- index = msi_alloc_remapped_irq(dev, irq, nvec_pow2);
- if (index < 0) {
- ret = index;
- goto error;
- }
- } else {
- ret = msi_setup_remapped_irq(dev, irq + sub_handle,
- index, sub_handle);
- if (ret < 0)
- goto error;
- }
- ret = setup_msi_irq(dev, msidesc, irq, sub_handle);
- if (ret < 0)
- goto error;
- }
- return 0;
-
-error:
- irq_free_hwirqs(irq, nvec);
-
- /*
- * Restore altered MSI descriptor fields and prevent just destroyed
- * IRQs from tearing down again in default_teardown_msi_irqs()
- */
- msidesc->irq = 0;
-
- return ret;
-}
-
-static int do_setup_msix_irqs(struct pci_dev *dev, int nvec)
-{
- int node, ret, sub_handle, index = 0;
- struct msi_desc *msidesc;
- unsigned int irq;
-
- node = dev_to_node(&dev->dev);
- sub_handle = 0;
-
- list_for_each_entry(msidesc, &dev->msi_list, list) {
-
- irq = irq_alloc_hwirq(node);
- if (irq == 0)
- return -1;
-
- if (sub_handle == 0)
- ret = index = msi_alloc_remapped_irq(dev, irq, nvec);
- else
- ret = msi_setup_remapped_irq(dev, irq, index, sub_handle);
-
- if (ret < 0)
- goto error;
-
- ret = setup_msi_irq(dev, msidesc, irq, 0);
- if (ret < 0)
- goto error;
-
- sub_handle += 1;
- irq += 1;
- }
-
- return 0;
-
-error:
- irq_free_hwirq(irq);
- return ret;
-}
-
-static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
- int nvec, int type)
-{
- if (type == PCI_CAP_ID_MSI)
- return do_setup_msi_irqs(dev, nvec);
- else
- return do_setup_msix_irqs(dev, nvec);
-}
-
-static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
-{
- /*
- * Intr-remapping uses pin number as the virtual vector
- * in the RTE. Actual vector is programmed in
- * intr-remapping table entry. Hence for the io-apic
- * EOI we use the pin number.
- */
- io_apic_eoi(apic, pin);
-}
-
static void __init irq_remapping_modify_x86_ops(void)
{
x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
- x86_io_apic_ops.set_affinity = set_remapped_irq_affinity;
- x86_io_apic_ops.setup_entry = setup_ioapic_remapped_entry;
- x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped;
- x86_msi.setup_msi_irqs = irq_remapping_setup_msi_irqs;
- x86_msi.setup_hpet_msi = setup_hpet_msi_remapped;
- x86_msi.compose_msi_msg = compose_remapped_msi_msg;
}
static __init int setup_nointremap(char *str)
@@ -198,6 +81,15 @@
irq_remap_broken = 1;
}
+bool irq_remapping_cap(enum irq_remap_cap cap)
+{
+ if (!remap_ops || disable_irq_post)
+ return 0;
+
+ return (remap_ops->capability & (1 << cap));
+}
+EXPORT_SYMBOL_GPL(irq_remapping_cap);
+
int __init irq_remapping_prepare(void)
{
if (disable_irq_remap)
@@ -254,113 +146,48 @@
return remap_ops->enable_faulting();
}
-int setup_ioapic_remapped_entry(int irq,
- struct IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
-{
- if (!remap_ops->setup_ioapic_entry)
- return -ENODEV;
-
- return remap_ops->setup_ioapic_entry(irq, entry, destination,
- vector, attr);
-}
-
-static int set_remapped_irq_affinity(struct irq_data *data,
- const struct cpumask *mask, bool force)
-{
- if (!config_enabled(CONFIG_SMP) || !remap_ops->set_affinity)
- return 0;
-
- return remap_ops->set_affinity(data, mask, force);
-}
-
-void free_remapped_irq(int irq)
-{
- struct irq_cfg *cfg = irq_cfg(irq);
-
- if (irq_remapped(cfg) && remap_ops->free_irq)
- remap_ops->free_irq(irq);
-}
-
-void compose_remapped_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
-{
- struct irq_cfg *cfg = irq_cfg(irq);
-
- if (!irq_remapped(cfg))
- native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
- else if (remap_ops->compose_msi_msg)
- remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
-}
-
-static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
-{
- if (!remap_ops->msi_alloc_irq)
- return -ENODEV;
-
- return remap_ops->msi_alloc_irq(pdev, irq, nvec);
-}
-
-static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
-{
- if (!remap_ops->msi_setup_irq)
- return -ENODEV;
-
- return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
-}
-
-int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
-{
- int ret;
-
- if (!remap_ops->alloc_hpet_msi)
- return -ENODEV;
-
- ret = remap_ops->alloc_hpet_msi(irq, id);
- if (ret)
- return -EINVAL;
-
- return default_setup_hpet_msi(irq, id);
-}
-
void panic_if_irq_remap(const char *msg)
{
if (irq_remapping_enabled)
panic(msg);
}
-static void ir_ack_apic_edge(struct irq_data *data)
+void ir_ack_apic_edge(struct irq_data *data)
{
ack_APIC_irq();
}
-static void ir_ack_apic_level(struct irq_data *data)
+/**
+ * irq_remapping_get_ir_irq_domain - Get the irqdomain associated with the IOMMU
+ * device serving request @info
+ * @info: interrupt allocation information, used to identify the IOMMU device
+ *
+ * It's used to get parent irqdomain for HPET and IOAPIC irqdomains.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *
+irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
{
- ack_APIC_irq();
- eoi_ioapic_irq(data->irq, irqd_cfg(data));
+ if (!remap_ops || !remap_ops->get_ir_irq_domain)
+ return NULL;
+
+ return remap_ops->get_ir_irq_domain(info);
}
-static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
+/**
+ * irq_remapping_get_irq_domain - Get the irqdomain serving the request @info
+ * @info: interrupt allocation information, used to identify the IOMMU device
+ *
+ * There will be one PCI MSI/MSIX irqdomain associated with each interrupt
+ * remapping device, so this interface is used to retrieve the PCI MSI/MSIX
+ * irqdomain serving request @info.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *
+irq_remapping_get_irq_domain(struct irq_alloc_info *info)
{
- seq_printf(p, " IR-%s", data->chip->name);
-}
+ if (!remap_ops || !remap_ops->get_irq_domain)
+ return NULL;
-void irq_remap_modify_chip_defaults(struct irq_chip *chip)
-{
- chip->irq_print_chip = ir_print_prefix;
- chip->irq_ack = ir_ack_apic_edge;
- chip->irq_eoi = ir_ack_apic_level;
- chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
-}
-
-bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
-{
- if (!irq_remapped(cfg))
- return false;
- irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
- irq_remap_modify_chip_defaults(chip);
- return true;
+ return remap_ops->get_irq_domain(info);
}
diff --git a/drivers/iommu/irq_remapping.h b/drivers/iommu/irq_remapping.h
index 7c70cc2..039c7af 100644
--- a/drivers/iommu/irq_remapping.h
+++ b/drivers/iommu/irq_remapping.h
@@ -24,19 +24,22 @@
#ifdef CONFIG_IRQ_REMAP
-struct IO_APIC_route_entry;
-struct io_apic_irq_attr;
struct irq_data;
-struct cpumask;
-struct pci_dev;
struct msi_msg;
+struct irq_domain;
+struct irq_alloc_info;
extern int irq_remap_broken;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
extern int irq_remapping_enabled;
+extern int disable_irq_post;
+
struct irq_remap_ops {
+ /* The supported capabilities */
+ int capability;
+
/* Initializes hardware and makes it ready for remapping interrupts */
int (*prepare)(void);
@@ -52,40 +55,23 @@
/* Enable fault handling */
int (*enable_faulting)(void);
- /* IO-APIC setup routine */
- int (*setup_ioapic_entry)(int irq, struct IO_APIC_route_entry *,
- unsigned int, int,
- struct io_apic_irq_attr *);
+ /* Get the irqdomain associated the IOMMU device */
+ struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
- /* Set the CPU affinity of a remapped interrupt */
- int (*set_affinity)(struct irq_data *data, const struct cpumask *mask,
- bool force);
-
- /* Free an IRQ */
- int (*free_irq)(int);
-
- /* Create MSI msg to use for interrupt remapping */
- void (*compose_msi_msg)(struct pci_dev *,
- unsigned int, unsigned int,
- struct msi_msg *, u8);
-
- /* Allocate remapping resources for MSI */
- int (*msi_alloc_irq)(struct pci_dev *, int, int);
-
- /* Setup the remapped MSI irq */
- int (*msi_setup_irq)(struct pci_dev *, unsigned int, int, int);
-
- /* Setup interrupt remapping for an HPET MSI */
- int (*alloc_hpet_msi)(unsigned int, unsigned int);
+ /* Get the MSI irqdomain associated with the IOMMU device */
+ struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
};
extern struct irq_remap_ops intel_irq_remap_ops;
extern struct irq_remap_ops amd_iommu_irq_ops;
+extern void ir_ack_apic_edge(struct irq_data *data);
+
#else /* CONFIG_IRQ_REMAP */
#define irq_remapping_enabled 0
#define irq_remap_broken 0
+#define disable_irq_post 1
#endif /* CONFIG_IRQ_REMAP */
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 5e7559b..eb934b0 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -20,7 +20,7 @@
#include "lg.h"
/* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */
-static unsigned int syscall_vector = SYSCALL_VECTOR;
+static unsigned int syscall_vector = IA32_SYSCALL_VECTOR;
module_param(syscall_vector, uint, 0444);
/* The address of the interrupt handler is split into two bits: */
@@ -333,8 +333,8 @@
*/
static bool could_be_syscall(unsigned int num)
{
- /* Normal Linux SYSCALL_VECTOR or reserved vector? */
- return num == SYSCALL_VECTOR || num == syscall_vector;
+ /* Normal Linux IA32_SYSCALL_VECTOR or reserved vector? */
+ return num == IA32_SYSCALL_VECTOR || num == syscall_vector;
}
/* The syscall vector it wants must be unused by Host. */
@@ -351,7 +351,7 @@
int init_interrupts(void)
{
/* If they want some strange system call vector, reserve it now */
- if (syscall_vector != SYSCALL_VECTOR) {
+ if (syscall_vector != IA32_SYSCALL_VECTOR) {
if (test_bit(syscall_vector, used_vectors) ||
vector_used_by_percpu_irq(syscall_vector)) {
printk(KERN_ERR "lg: couldn't reserve syscall %u\n",
@@ -366,7 +366,7 @@
void free_interrupts(void)
{
- if (syscall_vector != SYSCALL_VECTOR)
+ if (syscall_vector != IA32_SYSCALL_VECTOR)
clear_bit(syscall_vector, used_vectors);
}
diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig
index dd6ee57e..6e5867c 100644
--- a/drivers/media/pci/ivtv/Kconfig
+++ b/drivers/media/pci/ivtv/Kconfig
@@ -57,5 +57,8 @@
This is used in the Hauppauge PVR-350 card. There is a driver
homepage at <http://www.ivtvdriver.org>.
+ In order to use this module, you will need to boot with PAT disabled
+ on x86 systems, using the nopat kernel parameter.
+
To compile this driver as a module, choose M here: the
module will be called ivtvfb.
diff --git a/drivers/media/pci/ivtv/ivtvfb.c b/drivers/media/pci/ivtv/ivtvfb.c
index 9ff1230..4cb365d 100644
--- a/drivers/media/pci/ivtv/ivtvfb.c
+++ b/drivers/media/pci/ivtv/ivtvfb.c
@@ -44,8 +44,8 @@
#include <linux/ivtvfb.h>
#include <linux/slab.h>
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
+#ifdef CONFIG_X86_64
+#include <asm/pat.h>
#endif
#include "ivtv-driver.h"
@@ -155,12 +155,11 @@
/* Buffer size */
u32 video_buffer_size;
-#ifdef CONFIG_MTRR
/* video_base rounded down as required by hardware MTRRs */
unsigned long fb_start_aligned_physaddr;
/* video_base rounded up as required by hardware MTRRs */
unsigned long fb_end_aligned_physaddr;
-#endif
+ int wc_cookie;
/* Store the buffer offset */
int set_osd_coords_x;
@@ -1099,6 +1098,8 @@
static int ivtvfb_init_io(struct ivtv *itv)
{
struct osd_info *oi = itv->osd_info;
+ /* Find the largest power of two that maps the whole buffer */
+ int size_shift = 31;
mutex_lock(&itv->serialize_lock);
if (ivtv_init_on_first_open(itv)) {
@@ -1132,29 +1133,16 @@
oi->video_pbase, oi->video_vbase,
oi->video_buffer_size / 1024);
-#ifdef CONFIG_MTRR
- {
- /* Find the largest power of two that maps the whole buffer */
- int size_shift = 31;
-
- while (!(oi->video_buffer_size & (1 << size_shift))) {
- size_shift--;
- }
- size_shift++;
- oi->fb_start_aligned_physaddr = oi->video_pbase & ~((1 << size_shift) - 1);
- oi->fb_end_aligned_physaddr = oi->video_pbase + oi->video_buffer_size;
- oi->fb_end_aligned_physaddr += (1 << size_shift) - 1;
- oi->fb_end_aligned_physaddr &= ~((1 << size_shift) - 1);
- if (mtrr_add(oi->fb_start_aligned_physaddr,
- oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr,
- MTRR_TYPE_WRCOMB, 1) < 0) {
- IVTVFB_INFO("disabled mttr\n");
- oi->fb_start_aligned_physaddr = 0;
- oi->fb_end_aligned_physaddr = 0;
- }
- }
-#endif
-
+ while (!(oi->video_buffer_size & (1 << size_shift)))
+ size_shift--;
+ size_shift++;
+ oi->fb_start_aligned_physaddr = oi->video_pbase & ~((1 << size_shift) - 1);
+ oi->fb_end_aligned_physaddr = oi->video_pbase + oi->video_buffer_size;
+ oi->fb_end_aligned_physaddr += (1 << size_shift) - 1;
+ oi->fb_end_aligned_physaddr &= ~((1 << size_shift) - 1);
+ oi->wc_cookie = arch_phys_wc_add(oi->fb_start_aligned_physaddr,
+ oi->fb_end_aligned_physaddr -
+ oi->fb_start_aligned_physaddr);
/* Blank the entire osd. */
memset_io(oi->video_vbase, 0, oi->video_buffer_size);
@@ -1172,14 +1160,7 @@
/* Release pseudo palette */
kfree(oi->ivtvfb_info.pseudo_palette);
-
-#ifdef CONFIG_MTRR
- if (oi->fb_end_aligned_physaddr) {
- mtrr_del(-1, oi->fb_start_aligned_physaddr,
- oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr);
- }
-#endif
-
+ arch_phys_wc_del(oi->wc_cookie);
kfree(oi);
itv->osd_info = NULL;
}
@@ -1284,6 +1265,13 @@
int registered = 0;
int err;
+#ifdef CONFIG_X86_64
+ if (WARN(pat_enabled(),
+ "ivtvfb needs PAT disabled, boot with nopat kernel parameter\n")) {
+ return -ENODEV;
+ }
+#endif
+
if (ivtvfb_card_id < -1 || ivtvfb_card_id >= IVTV_MAX_CARDS) {
printk(KERN_ERR "ivtvfb: ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n",
IVTV_MAX_CARDS - 1);
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index ea091bc..1e09243 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
+#include <linux/vmalloc.h>
#include <asm/sync_bitops.h>
#include "hyperv_net.h"
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 9118cea..35a482d 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -27,6 +27,7 @@
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/nls.h>
+#include <linux/vmalloc.h>
#include "hyperv_net.h"
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index a94dd2c..7eb4109 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -23,20 +23,11 @@
*/
static DEFINE_SPINLOCK(ht_irq_lock);
-struct ht_irq_cfg {
- struct pci_dev *dev;
- /* Update callback used to cope with buggy hardware */
- ht_irq_update_t *update;
- unsigned pos;
- unsigned idx;
- struct ht_irq_msg msg;
-};
-
-
void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
unsigned long flags;
+
spin_lock_irqsave(&ht_irq_lock, flags);
if (cfg->msg.address_lo != msg->address_lo) {
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
@@ -55,6 +46,7 @@
void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
+
*msg = cfg->msg;
}
@@ -86,7 +78,6 @@
*/
int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
{
- struct ht_irq_cfg *cfg;
int max_irq, pos, irq;
unsigned long flags;
u32 data;
@@ -105,29 +96,9 @@
if (idx > max_irq)
return -EINVAL;
- cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg)
- return -ENOMEM;
-
- cfg->dev = dev;
- cfg->update = update;
- cfg->pos = pos;
- cfg->idx = 0x10 + (idx * 2);
- /* Initialize msg to a value that will never match the first write. */
- cfg->msg.address_lo = 0xffffffff;
- cfg->msg.address_hi = 0xffffffff;
-
- irq = irq_alloc_hwirq(dev_to_node(&dev->dev));
- if (!irq) {
- kfree(cfg);
- return -EBUSY;
- }
- irq_set_handler_data(irq, cfg);
-
- if (arch_setup_ht_irq(irq, dev) < 0) {
- ht_destroy_irq(irq);
- return -EBUSY;
- }
+ irq = arch_setup_ht_irq(idx, pos, dev, update);
+ if (irq > 0)
+ dev_dbg(&dev->dev, "irq %d for HT\n", irq);
return irq;
}
@@ -158,13 +129,6 @@
*/
void ht_destroy_irq(unsigned int irq)
{
- struct ht_irq_cfg *cfg;
-
- cfg = irq_get_handler_data(irq);
- irq_set_chip(irq, NULL);
- irq_set_handler_data(irq, NULL);
- irq_free_hwirq(irq);
-
- kfree(cfg);
+ arch_teardown_ht_irq(irq);
}
EXPORT_SYMBOL(ht_destroy_irq);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index c6dc1df..2890ad7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -819,13 +819,6 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
-
-static void quirk_ioapic_rmw(struct pci_dev *dev)
-{
- if (dev->devfn == 0 && dev->bus->number == 0)
- sis_apic_bug = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw);
#endif /* CONFIG_X86_IO_APIC */
/*
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
index 5980c10..d6498fa 100644
--- a/drivers/scsi/fnic/fnic_debugfs.c
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/debugfs.h>
+#include <linux/vmalloc.h>
#include "fnic.h"
static struct dentry *fnic_trace_debugfs_root;
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index 65a9bde..4e15c4b 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -21,6 +21,7 @@
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
#include <linux/time.h>
+#include <linux/vmalloc.h>
#include "fnic_io.h"
#include "fnic.h"
diff --git a/drivers/video/fbdev/amifb.c b/drivers/video/fbdev/amifb.c
index 35f7900..ee3a703 100644
--- a/drivers/video/fbdev/amifb.c
+++ b/drivers/video/fbdev/amifb.c
@@ -3705,8 +3705,8 @@
* access the videomem with writethrough cache
*/
info->fix.smem_start = (u_long)ZTWO_PADDR(videomemory);
- videomemory = (u_long)ioremap_writethrough(info->fix.smem_start,
- info->fix.smem_len);
+ videomemory = (u_long)ioremap_wt(info->fix.smem_start,
+ info->fix.smem_len);
if (!videomemory) {
dev_warn(&pdev->dev,
"Unable to map videomem cached writethrough\n");
diff --git a/drivers/video/fbdev/atafb.c b/drivers/video/fbdev/atafb.c
index cb9ee25..d6ce613 100644
--- a/drivers/video/fbdev/atafb.c
+++ b/drivers/video/fbdev/atafb.c
@@ -3185,8 +3185,7 @@
/* Map the video memory (physical address given) to somewhere
* in the kernel address space.
*/
- external_screen_base = ioremap_writethrough(external_addr,
- external_len);
+ external_screen_base = ioremap_wt(external_addr, external_len);
if (external_vgaiobase)
external_vgaiobase =
(unsigned long)ioremap(external_vgaiobase, 0x10000);
diff --git a/drivers/video/fbdev/hpfb.c b/drivers/video/fbdev/hpfb.c
index a1b7e5f..9476d19 100644
--- a/drivers/video/fbdev/hpfb.c
+++ b/drivers/video/fbdev/hpfb.c
@@ -241,8 +241,8 @@
fb_info.fix.line_length = fb_width;
fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB);
fb_info.fix.smem_len = fb_width * fb_height;
- fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start,
- fb_info.fix.smem_len);
+ fb_start = (unsigned long)ioremap_wt(fb_info.fix.smem_start,
+ fb_info.fix.smem_len);
hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB);
hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB);
hpfb_defined.xres_virtual = hpfb_defined.xres;
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 9db0423..f56094c 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -769,6 +769,14 @@
}
#endif
+#ifndef ioremap_uc
+#define ioremap_uc ioremap_uc
+static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size)
+{
+ return ioremap_nocache(offset, size);
+}
+#endif
+
#ifndef ioremap_wc
#define ioremap_wc ioremap_wc
static inline void __iomem *ioremap_wc(phys_addr_t offset, size_t size)
@@ -777,8 +785,17 @@
}
#endif
+#ifndef ioremap_wt
+#define ioremap_wt ioremap_wt
+static inline void __iomem *ioremap_wt(phys_addr_t offset, size_t size)
+{
+ return ioremap_nocache(offset, size);
+}
+#endif
+
#ifndef iounmap
#define iounmap iounmap
+
static inline void iounmap(void __iomem *addr)
{
}
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
index 1b41011..d8f8622 100644
--- a/include/asm-generic/iomap.h
+++ b/include/asm-generic/iomap.h
@@ -66,6 +66,10 @@
#define ioremap_wc ioremap_nocache
#endif
+#ifndef ARCH_HAS_IOREMAP_WT
+#define ioremap_wt ioremap_nocache
+#endif
+
#ifdef CONFIG_PCI
/* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
struct pci_dev;
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 39f1d6a..bd910ce 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -262,6 +262,10 @@
#define pgprot_writecombine pgprot_noncached
#endif
+#ifndef pgprot_writethrough
+#define pgprot_writethrough pgprot_noncached
+#endif
+
#ifndef pgprot_device
#define pgprot_device pgprot_noncached
#endif
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 3062495..e9bc929 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -185,33 +185,85 @@
struct irte {
union {
+ /* Shared between remapped and posted mode*/
struct {
- __u64 present : 1,
- fpd : 1,
- dst_mode : 1,
- redir_hint : 1,
- trigger_mode : 1,
- dlvry_mode : 3,
- avail : 4,
- __reserved_1 : 4,
- vector : 8,
- __reserved_2 : 8,
- dest_id : 32;
+ __u64 present : 1, /* 0 */
+ fpd : 1, /* 1 */
+ __res0 : 6, /* 2 - 6 */
+ avail : 4, /* 8 - 11 */
+ __res1 : 3, /* 12 - 14 */
+ pst : 1, /* 15 */
+ vector : 8, /* 16 - 23 */
+ __res2 : 40; /* 24 - 63 */
+ };
+
+ /* Remapped mode */
+ struct {
+ __u64 r_present : 1, /* 0 */
+ r_fpd : 1, /* 1 */
+ dst_mode : 1, /* 2 */
+ redir_hint : 1, /* 3 */
+ trigger_mode : 1, /* 4 */
+ dlvry_mode : 3, /* 5 - 7 */
+ r_avail : 4, /* 8 - 11 */
+ r_res0 : 4, /* 12 - 15 */
+ r_vector : 8, /* 16 - 23 */
+ r_res1 : 8, /* 24 - 31 */
+ dest_id : 32; /* 32 - 63 */
+ };
+
+ /* Posted mode */
+ struct {
+ __u64 p_present : 1, /* 0 */
+ p_fpd : 1, /* 1 */
+ p_res0 : 6, /* 2 - 7 */
+ p_avail : 4, /* 8 - 11 */
+ p_res1 : 2, /* 12 - 13 */
+ p_urgent : 1, /* 14 */
+ p_pst : 1, /* 15 */
+ p_vector : 8, /* 16 - 23 */
+ p_res2 : 14, /* 24 - 37 */
+ pda_l : 26; /* 38 - 63 */
};
__u64 low;
};
union {
+ /* Shared between remapped and posted mode*/
struct {
- __u64 sid : 16,
- sq : 2,
- svt : 2,
- __reserved_3 : 44;
+ __u64 sid : 16, /* 64 - 79 */
+ sq : 2, /* 80 - 81 */
+ svt : 2, /* 82 - 83 */
+ __res3 : 44; /* 84 - 127 */
+ };
+
+ /* Posted mode*/
+ struct {
+ __u64 p_sid : 16, /* 64 - 79 */
+ p_sq : 2, /* 80 - 81 */
+ p_svt : 2, /* 82 - 83 */
+ p_res3 : 12, /* 84 - 95 */
+ pda_h : 32; /* 96 - 127 */
};
__u64 high;
};
};
+static inline void dmar_copy_shared_irte(struct irte *dst, struct irte *src)
+{
+ dst->present = src->present;
+ dst->fpd = src->fpd;
+ dst->avail = src->avail;
+ dst->pst = src->pst;
+ dst->vector = src->vector;
+ dst->sid = src->sid;
+ dst->sq = src->sq;
+ dst->svt = src->svt;
+}
+
+#define PDA_LOW_BIT 26
+#define PDA_HIGH_BIT 32
+
enum {
IRQ_REMAP_XAPIC_MODE,
IRQ_REMAP_X2APIC_MODE,
@@ -227,6 +279,7 @@
extern void dmar_msi_write(int irq, struct msi_msg *msg);
extern int dmar_set_interrupt(struct intel_iommu *iommu);
extern irqreturn_t dmar_fault(int irq, void *dev_id);
-extern int arch_setup_dmar_msi(unsigned int irq);
+extern int dmar_alloc_hwirq(int id, int node, void *arg);
+extern void dmar_free_hwirq(int irq);
#endif /* __DMAR_H__ */
diff --git a/include/linux/htirq.h b/include/linux/htirq.h
index 70a1dbb..d4a527e 100644
--- a/include/linux/htirq.h
+++ b/include/linux/htirq.h
@@ -1,24 +1,38 @@
#ifndef LINUX_HTIRQ_H
#define LINUX_HTIRQ_H
+struct pci_dev;
+struct irq_data;
+
struct ht_irq_msg {
u32 address_lo; /* low 32 bits of the ht irq message */
u32 address_hi; /* high 32 bits of the it irq message */
};
+typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
+ struct ht_irq_msg *msg);
+
+struct ht_irq_cfg {
+ struct pci_dev *dev;
+ /* Update callback used to cope with buggy hardware */
+ ht_irq_update_t *update;
+ unsigned pos;
+ unsigned idx;
+ struct ht_irq_msg msg;
+};
+
/* Helper functions.. */
void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
-struct irq_data;
void mask_ht_irq(struct irq_data *data);
void unmask_ht_irq(struct irq_data *data);
/* The arch hook for getting things started */
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
+int arch_setup_ht_irq(int idx, int pos, struct pci_dev *dev,
+ ht_irq_update_t *update);
+void arch_teardown_ht_irq(unsigned int irq);
/* For drivers of buggy hardware */
-typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
- struct ht_irq_msg *msg);
int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update);
#endif /* LINUX_HTIRQ_H */
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index a240e61..3665cb3 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -87,6 +87,7 @@
/*
* Decoding Capability Register
*/
+#define cap_pi_support(c) (((c) >> 59) & 1)
#define cap_read_drain(c) (((c) >> 55) & 1)
#define cap_write_drain(c) (((c) >> 54) & 1)
#define cap_max_amask_val(c) (((c) >> 48) & 0x3f)
@@ -299,6 +300,8 @@
#define INTR_REMAP_TABLE_ENTRIES 65536
+struct irq_domain;
+
struct ir_table {
struct irte *base;
unsigned long *bitmap;
@@ -348,6 +351,8 @@
#ifdef CONFIG_IRQ_REMAP
struct ir_table *ir_table; /* Interrupt remapping info */
+ struct irq_domain *ir_domain;
+ struct irq_domain *ir_msi_domain;
#endif
struct device *iommu_dev; /* IOMMU-sysfs device */
int node;
diff --git a/include/linux/io.h b/include/linux/io.h
index 986f2bf..fb5a998 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -19,6 +19,7 @@
#define _LINUX_IO_H
#include <linux/types.h>
+#include <linux/init.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -111,6 +112,13 @@
}
#define arch_phys_wc_add arch_phys_wc_add
+#ifndef arch_phys_wc_index
+static inline int arch_phys_wc_index(int handle)
+{
+ return -1;
+}
+#define arch_phys_wc_index arch_phys_wc_index
+#endif
#endif
#endif /* _LINUX_IO_H */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 62c6901..48cb7d1 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -327,6 +327,7 @@
* @irq_write_msi_msg: optional to write message content for MSI
* @irq_get_irqchip_state: return the internal state of an interrupt
* @irq_set_irqchip_state: set the internal state of a interrupt
+ * @irq_set_vcpu_affinity: optional to target a vCPU in a virtual machine
* @flags: chip specific flags
*/
struct irq_chip {
@@ -369,6 +370,8 @@
int (*irq_get_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool *state);
int (*irq_set_irqchip_state)(struct irq_data *data, enum irqchip_irq_state which, bool state);
+ int (*irq_set_vcpu_affinity)(struct irq_data *data, void *vcpu_info);
+
unsigned long flags;
};
@@ -422,6 +425,7 @@
extern void irq_cpu_offline(void);
extern int irq_set_affinity_locked(struct irq_data *data,
const struct cpumask *cpumask, bool force);
+extern int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info);
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
void irq_move_irq(struct irq_data *data);
@@ -467,6 +471,8 @@
const struct cpumask *dest,
bool force);
extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
+extern int irq_chip_set_vcpu_affinity_parent(struct irq_data *data,
+ void *vcpu_info);
#endif
/* Handling of unhandled and spurious interrupts: */
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index dd1109f..a113a8d 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -93,6 +93,15 @@
extern struct irq_desc irq_desc[NR_IRQS];
#endif
+static inline struct irq_desc *irq_data_to_desc(struct irq_data *data)
+{
+#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+ return irq_to_desc(data->irq);
+#else
+ return container_of(data, struct irq_desc, irq_data);
+#endif
+}
+
static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
{
return &desc->irq_data;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index eb9a4ea..55016b2 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -950,6 +950,20 @@
}
/**
+ * irq_chip_set_vcpu_affinity_parent - Set vcpu affinity on the parent interrupt
+ * @data: Pointer to interrupt specific data
+ * @dest: The vcpu affinity information
+ */
+int irq_chip_set_vcpu_affinity_parent(struct irq_data *data, void *vcpu_info)
+{
+ data = data->parent_data;
+ if (data->chip->irq_set_vcpu_affinity)
+ return data->chip->irq_set_vcpu_affinity(data, vcpu_info);
+
+ return -ENOSYS;
+}
+
+/**
* irq_chip_set_wake_parent - Set/reset wake-up on the parent interrupt
* @data: Pointer to interrupt specific data
* @on: Whether to set or reset the wake-up capability of this irq
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index df553b0..b93d434 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -59,8 +59,6 @@
#include "debug.h"
#include "settings.h"
-#define irq_data_to_desc(data) container_of(data, struct irq_desc, irq_data)
-
extern int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
unsigned long flags);
extern void __disable_irq(struct irq_desc *desc, unsigned int irq);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index e68932b..b1c7e8f 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -256,6 +256,37 @@
}
EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
+/**
+ * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
+ * @irq: interrupt number to set affinity
+ * @vcpu_info: vCPU specific data
+ *
+ * This function uses the vCPU specific data to set the vCPU
+ * affinity for an irq. The vCPU specific data is passed from
+ * outside, such as KVM. One example code path is as below:
+ * KVM -> IOMMU -> irq_set_vcpu_affinity().
+ */
+int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
+{
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
+ struct irq_data *data;
+ struct irq_chip *chip;
+ int ret = -ENOSYS;
+
+ if (!desc)
+ return -EINVAL;
+
+ data = irq_desc_get_irq_data(desc);
+ chip = irq_data_get_irq_chip(data);
+ if (chip && chip->irq_set_vcpu_affinity)
+ ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
+ irq_put_desc_unlock(desc, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
+
static void irq_affinity_notify(struct work_struct *work)
{
struct irq_affinity_notify *notify =
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index ca3f4aa..dd203e2 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -7,7 +7,7 @@
void irq_move_masked_irq(struct irq_data *idata)
{
struct irq_desc *desc = irq_data_to_desc(idata);
- struct irq_chip *chip = idata->chip;
+ struct irq_chip *chip = desc->irq_data.chip;
if (likely(!irqd_is_setaffinity_pending(&desc->irq_data)))
return;
@@ -52,6 +52,13 @@
{
bool masked;
+ /*
+ * Get top level irq_data when CONFIG_IRQ_DOMAIN_HIERARCHY is enabled,
+ * and it should be optimized away when CONFIG_IRQ_DOMAIN_HIERARCHY is
+ * disabled. So we avoid an "#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY" here.
+ */
+ idata = irq_desc_get_irq_data(irq_data_to_desc(idata));
+
if (likely(!irqd_is_setaffinity_pending(idata)))
return;
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 5b3add3..2c9082b 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -212,5 +212,5 @@
)
}
-(ignore_list && syscall_list $(dirname $0)/../arch/x86/syscalls/syscall_32.tbl) | \
+(ignore_list && syscall_list $(dirname $0)/../arch/x86/entry/syscalls/syscall_32.tbl) | \
$* -E -x c - > /dev/null
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index 6610bd0..d17937b 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -32,6 +32,7 @@
#include <linux/pci.h>
#include <linux/stringify.h>
#include <linux/module.h>
+#include <linux/vmalloc.h>
#ifdef MODULE_FIRMWARE
MODULE_FIRMWARE("asihpi/dsp5000.bin");
diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
index 4039854..e367b1a 100644
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -9,7 +9,7 @@
turbostat : turbostat.c
CFLAGS += -Wall
-CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/uapi/asm/msr-index.h"'
+CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"'
%: %.c
@mkdir -p $(BUILD_OUTPUT)
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 9b0d8ba..caa60d5 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -4,7 +4,7 @@
.PHONY: all all_32 all_64 warn_32bit_failure clean
-TARGETS_C_BOTHBITS := sigreturn single_step_syscall
+TARGETS_C_BOTHBITS := sigreturn single_step_syscall sysret_ss_attrs
TARGETS_C_32BIT_ONLY := entry_from_vm86
TARGETS_C_32BIT_ALL := $(TARGETS_C_BOTHBITS) $(TARGETS_C_32BIT_ONLY)
@@ -57,3 +57,6 @@
echo " yum install glibc-devel.*i686"; \
exit 0;
endif
+
+# Some tests have additional dependencies.
+sysret_ss_attrs_64: thunks.S
diff --git a/tools/testing/selftests/x86/sysret_ss_attrs.c b/tools/testing/selftests/x86/sysret_ss_attrs.c
new file mode 100644
index 0000000..ce42d5a
--- /dev/null
+++ b/tools/testing/selftests/x86/sysret_ss_attrs.c
@@ -0,0 +1,112 @@
+/*
+ * sysret_ss_attrs.c - test that syscalls return valid hidden SS attributes
+ * Copyright (c) 2015 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * On AMD CPUs, SYSRET can return with a valid SS descriptor with with
+ * the hidden attributes set to an unusable state. Make sure the kernel
+ * doesn't let this happen.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <err.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <pthread.h>
+
+static void *threadproc(void *ctx)
+{
+ /*
+ * Do our best to cause sleeps on this CPU to exit the kernel and
+ * re-enter with SS = 0.
+ */
+ while (true)
+ ;
+
+ return NULL;
+}
+
+#ifdef __x86_64__
+extern unsigned long call32_from_64(void *stack, void (*function)(void));
+
+asm (".pushsection .text\n\t"
+ ".code32\n\t"
+ "test_ss:\n\t"
+ "pushl $0\n\t"
+ "popl %eax\n\t"
+ "ret\n\t"
+ ".code64");
+extern void test_ss(void);
+#endif
+
+int main()
+{
+ /*
+ * Start a busy-looping thread on the same CPU we're on.
+ * For simplicity, just stick everything to CPU 0. This will
+ * fail in some containers, but that's probably okay.
+ */
+ cpu_set_t cpuset;
+ CPU_ZERO(&cpuset);
+ CPU_SET(0, &cpuset);
+ if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0)
+ printf("[WARN]\tsched_setaffinity failed\n");
+
+ pthread_t thread;
+ if (pthread_create(&thread, 0, threadproc, 0) != 0)
+ err(1, "pthread_create");
+
+#ifdef __x86_64__
+ unsigned char *stack32 = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
+ MAP_32BIT | MAP_ANONYMOUS | MAP_PRIVATE,
+ -1, 0);
+ if (stack32 == MAP_FAILED)
+ err(1, "mmap");
+#endif
+
+ printf("[RUN]\tSyscalls followed by SS validation\n");
+
+ for (int i = 0; i < 1000; i++) {
+ /*
+ * Go to sleep and return using sysret (if we're 64-bit
+ * or we're 32-bit on AMD on a 64-bit kernel). On AMD CPUs,
+ * SYSRET doesn't fix up the cached SS descriptor, so the
+ * kernel needs some kind of workaround to make sure that we
+ * end the system call with a valid stack segment. This
+ * can be a confusing failure because the SS *selector*
+ * is the same regardless.
+ */
+ usleep(2);
+
+#ifdef __x86_64__
+ /*
+ * On 32-bit, just doing a syscall through glibc is enough
+ * to cause a crash if our cached SS descriptor is invalid.
+ * On 64-bit, it's not, so try extra hard.
+ */
+ call32_from_64(stack32 + 4088, test_ss);
+#endif
+ }
+
+ printf("[OK]\tWe survived\n");
+
+#ifdef __x86_64__
+ munmap(stack32, 4096);
+#endif
+
+ return 0;
+}
diff --git a/tools/testing/selftests/x86/thunks.S b/tools/testing/selftests/x86/thunks.S
new file mode 100644
index 0000000..ce8a995
--- /dev/null
+++ b/tools/testing/selftests/x86/thunks.S
@@ -0,0 +1,67 @@
+/*
+ * thunks.S - assembly helpers for mixed-bitness code
+ * Copyright (c) 2015 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * These are little helpers that make it easier to switch bitness on
+ * the fly.
+ */
+
+ .text
+
+ .global call32_from_64
+ .type call32_from_64, @function
+call32_from_64:
+ // rdi: stack to use
+ // esi: function to call
+
+ // Save registers
+ pushq %rbx
+ pushq %rbp
+ pushq %r12
+ pushq %r13
+ pushq %r14
+ pushq %r15
+ pushfq
+
+ // Switch stacks
+ mov %rsp,(%rdi)
+ mov %rdi,%rsp
+
+ // Switch to compatibility mode
+ pushq $0x23 /* USER32_CS */
+ pushq $1f
+ lretq
+
+1:
+ .code32
+ // Call the function
+ call *%esi
+ // Switch back to long mode
+ jmp $0x33,$1f
+ .code64
+
+1:
+ // Restore the stack
+ mov (%rsp),%rsp
+
+ // Restore registers
+ popfq
+ popq %r15
+ popq %r14
+ popq %r13
+ popq %r12
+ popq %rbp
+ popq %rbx
+
+ ret
+
+.size call32_from_64, .-call32_from_64