diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ac22bb7..d4d4cb7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -242,21 +242,13 @@
 	def_bool y
 	depends on X86_MPPARSE || X86_VOYAGER
 
-if ACPI
 config X86_MPPARSE
-	def_bool y
-	bool "Enable MPS table"
+	bool "Enable MPS table" if ACPI
+	default y
 	depends on X86_LOCAL_APIC
 	help
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
-endif
-
-if !ACPI
-config X86_MPPARSE
-	def_bool y
-	depends on X86_LOCAL_APIC
-endif
 
 choice
 	prompt "Subarchitecture Type"
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 4bc02b2..9ddf2fa 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -197,23 +197,28 @@
 	/* fp state follows here */
 };
 
-#define COPY(x)		{ 		\
-	unsigned int reg;		\
-	err |= __get_user(reg, &sc->x);	\
-	regs->x = reg;			\
+#define COPY(x)			{		\
+	err |= __get_user(regs->x, &sc->x);	\
 }
 
-#define RELOAD_SEG(seg,mask)						\
-	{ unsigned int cur;						\
-	  unsigned short pre;						\
-	  err |= __get_user(pre, &sc->seg);				\
-	  savesegment(seg, cur);					\
-	  pre |= mask;							\
-	  if (pre != cur) loadsegment(seg, pre); }
+#define COPY_SEG_CPL3(seg)	{			\
+		unsigned short tmp;			\
+		err |= __get_user(tmp, &sc->seg);	\
+		regs->seg = tmp | 3;			\
+}
+
+#define RELOAD_SEG(seg)		{		\
+	unsigned int cur, pre;			\
+	err |= __get_user(pre, &sc->seg);	\
+	savesegment(seg, cur);			\
+	pre |= 3;				\
+	if (pre != cur)				\
+		loadsegment(seg, pre);		\
+}
 
 static int ia32_restore_sigcontext(struct pt_regs *regs,
 				   struct sigcontext_ia32 __user *sc,
-				   unsigned int *peax)
+				   unsigned int *pax)
 {
 	unsigned int tmpflags, gs, oldgs, err = 0;
 	void __user *buf;
@@ -240,18 +245,16 @@
 	if (gs != oldgs)
 		load_gs_index(gs);
 
-	RELOAD_SEG(fs, 3);
-	RELOAD_SEG(ds, 3);
-	RELOAD_SEG(es, 3);
+	RELOAD_SEG(fs);
+	RELOAD_SEG(ds);
+	RELOAD_SEG(es);
 
 	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
 	COPY(dx); COPY(cx); COPY(ip);
 	/* Don't touch extended registers */
 
-	err |= __get_user(regs->cs, &sc->cs);
-	regs->cs |= 3;
-	err |= __get_user(regs->ss, &sc->ss);
-	regs->ss |= 3;
+	COPY_SEG_CPL3(cs);
+	COPY_SEG_CPL3(ss);
 
 	err |= __get_user(tmpflags, &sc->flags);
 	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
@@ -262,9 +265,7 @@
 	buf = compat_ptr(tmp);
 	err |= restore_i387_xstate_ia32(buf);
 
-	err |= __get_user(tmp, &sc->ax);
-	*peax = tmp;
-
+	err |= __get_user(*pax, &sc->ax);
 	return err;
 }
 
@@ -359,20 +360,15 @@
 	err |= __put_user(regs->dx, &sc->dx);
 	err |= __put_user(regs->cx, &sc->cx);
 	err |= __put_user(regs->ax, &sc->ax);
-	err |= __put_user(regs->cs, &sc->cs);
-	err |= __put_user(regs->ss, &sc->ss);
 	err |= __put_user(current->thread.trap_no, &sc->trapno);
 	err |= __put_user(current->thread.error_code, &sc->err);
 	err |= __put_user(regs->ip, &sc->ip);
+	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
 	err |= __put_user(regs->flags, &sc->flags);
 	err |= __put_user(regs->sp, &sc->sp_at_signal);
+	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
 
-	tmp = save_i387_xstate_ia32(fpstate);
-	if (tmp < 0)
-		err = -EFAULT;
-	else
-		err |= __put_user(ptr_to_compat(tmp ? fpstate : NULL),
-					&sc->fpstate);
+	err |= __put_user(ptr_to_compat(fpstate), &sc->fpstate);
 
 	/* non-iBCS2 extensions.. */
 	err |= __put_user(mask, &sc->oldmask);
@@ -408,6 +404,8 @@
 	if (used_math()) {
 		sp = sp - sig_xstate_ia32_size;
 		*fpstate = (struct _fpstate_ia32 *) sp;
+		if (save_i387_xstate_ia32(*fpstate) < 0)
+			return (void __user *) -1L;
 	}
 
 	sp -= frame_size;
@@ -430,12 +428,10 @@
 		u16 poplmovl;
 		u32 val;
 		u16 int80;
-		u16 pad;
 	} __attribute__((packed)) code = {
 		0xb858,		 /* popl %eax ; movl $...,%eax */
 		__NR_ia32_sigreturn,
 		0x80cd,		/* int $0x80 */
-		0,
 	};
 
 	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
@@ -511,8 +507,7 @@
 		u8 movl;
 		u32 val;
 		u16 int80;
-		u16 pad;
-		u8  pad2;
+		u8  pad;
 	} __attribute__((packed)) code = {
 		0xb8,
 		__NR_ia32_rt_sigreturn,
@@ -572,11 +567,6 @@
 	regs->dx = (unsigned long) &frame->info;
 	regs->cx = (unsigned long) &frame->uc;
 
-	/* Make -mregparm=3 work */
-	regs->ax = sig;
-	regs->dx = (unsigned long) &frame->info;
-	regs->cx = (unsigned long) &frame->uc;
-
 	loadsegment(ds, __USER32_DS);
 	loadsegment(es, __USER32_DS);
 
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 3600103..9fa9dcd 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -168,7 +168,15 @@
  */
 static inline void change_bit(int nr, volatile unsigned long *addr)
 {
-	asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
+	if (IS_IMMEDIATE(nr)) {
+		asm volatile(LOCK_PREFIX "xorb %1,%0"
+			: CONST_MASK_ADDR(nr, addr)
+			: "iq" ((u8)CONST_MASK(nr)));
+	} else {
+		asm volatile(LOCK_PREFIX "btc %1,%0"
+			: BITOP_ADDR(addr)
+			: "Ir" (nr));
+	}
 }
 
 /**
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
index e02ae2d..f110ad4 100644
--- a/arch/x86/include/asm/byteorder.h
+++ b/arch/x86/include/asm/byteorder.h
@@ -4,26 +4,33 @@
 #include <asm/types.h>
 #include <linux/compiler.h>
 
-#ifdef __GNUC__
+#define __LITTLE_ENDIAN
 
-#ifdef __i386__
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
 {
-#ifdef CONFIG_X86_BSWAP
-	asm("bswap %0" : "=r" (x) : "0" (x));
-#else
+#ifdef __i386__
+# ifdef CONFIG_X86_BSWAP
+	asm("bswap %0" : "=r" (val) : "0" (val));
+# else
 	asm("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
 	    "rorl $16,%0\n\t"	/* swap words		*/
 	    "xchgb %b0,%h0"	/* swap higher bytes	*/
-	    : "=q" (x)
-	    : "0" (x));
-#endif
-	return x;
-}
+	    : "=q" (val)
+	    : "0" (val));
+# endif
 
-static inline __attribute_const__ __u64 ___arch__swab64(__u64 val)
+#else /* __i386__ */
+	asm("bswapl %0"
+	    : "=r" (val)
+	    : "0" (val));
+#endif
+	return val;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u64 __arch_swab64(__u64 val)
 {
+#ifdef __i386__
 	union {
 		struct {
 			__u32 a;
@@ -32,50 +39,27 @@
 		__u64 u;
 	} v;
 	v.u = val;
-#ifdef CONFIG_X86_BSWAP
+# ifdef CONFIG_X86_BSWAP
 	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
 	    : "=r" (v.s.a), "=r" (v.s.b)
 	    : "0" (v.s.a), "1" (v.s.b));
-#else
-	v.s.a = ___arch__swab32(v.s.a);
-	v.s.b = ___arch__swab32(v.s.b);
+# else
+	v.s.a = __arch_swab32(v.s.a);
+	v.s.b = __arch_swab32(v.s.b);
 	asm("xchgl %0,%1"
 	    : "=r" (v.s.a), "=r" (v.s.b)
 	    : "0" (v.s.a), "1" (v.s.b));
-#endif
+# endif
 	return v.u;
-}
-
 #else /* __i386__ */
-
-static inline __attribute_const__ __u64 ___arch__swab64(__u64 x)
-{
 	asm("bswapq %0"
-	    : "=r" (x)
-	    : "0" (x));
-	return x;
-}
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	asm("bswapl %0"
-	    : "=r" (x)
-	    : "0" (x));
-	return x;
-}
-
+	    : "=r" (val)
+	    : "0" (val));
+	return val;
 #endif
+}
+#define __arch_swab64 __arch_swab64
 
-/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
-   convert it into rotation or exhange.  */
-
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-
-#define __BYTEORDER_HAS_U64__
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
+#include <linux/byteorder.h>
 
 #endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 804b6e6..3afc5e8 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -6,56 +6,91 @@
 #endif
 
 /*
-   Macros for dwarf2 CFI unwind table entries.
-   See "as.info" for details on these pseudo ops. Unfortunately
-   they are only supported in very new binutils, so define them
-   away for older version.
+ * Macros for dwarf2 CFI unwind table entries.
+ * See "as.info" for details on these pseudo ops. Unfortunately
+ * they are only supported in very new binutils, so define them
+ * away for older version.
  */
 
 #ifdef CONFIG_AS_CFI
 
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
+#define CFI_STARTPROC		.cfi_startproc
+#define CFI_ENDPROC		.cfi_endproc
+#define CFI_DEF_CFA		.cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
+#define CFI_OFFSET		.cfi_offset
+#define CFI_REL_OFFSET		.cfi_rel_offset
+#define CFI_REGISTER		.cfi_register
+#define CFI_RESTORE		.cfi_restore
+#define CFI_REMEMBER_STATE	.cfi_remember_state
+#define CFI_RESTORE_STATE	.cfi_restore_state
+#define CFI_UNDEFINED		.cfi_undefined
 
 #ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#define CFI_SIGNAL_FRAME	.cfi_signal_frame
 #else
 #define CFI_SIGNAL_FRAME
 #endif
 
 #else
 
-/* Due to the structure of pre-exisiting code, don't use assembler line
-   comment character # to ignore the arguments. Instead, use a dummy macro. */
+/*
+ * Due to the structure of pre-exisiting code, don't use assembler line
+ * comment character # to ignore the arguments. Instead, use a dummy macro.
+ */
 .macro cfi_ignore a=0, b=0, c=0, d=0
 .endm
 
-#define CFI_STARTPROC	cfi_ignore
-#define CFI_ENDPROC	cfi_ignore
-#define CFI_DEF_CFA	cfi_ignore
+#define CFI_STARTPROC		cfi_ignore
+#define CFI_ENDPROC		cfi_ignore
+#define CFI_DEF_CFA		cfi_ignore
 #define CFI_DEF_CFA_REGISTER	cfi_ignore
 #define CFI_DEF_CFA_OFFSET	cfi_ignore
 #define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET	cfi_ignore
-#define CFI_REL_OFFSET	cfi_ignore
-#define CFI_REGISTER	cfi_ignore
-#define CFI_RESTORE	cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
+#define CFI_OFFSET		cfi_ignore
+#define CFI_REL_OFFSET		cfi_ignore
+#define CFI_REGISTER		cfi_ignore
+#define CFI_RESTORE		cfi_ignore
+#define CFI_REMEMBER_STATE	cfi_ignore
+#define CFI_RESTORE_STATE	cfi_ignore
+#define CFI_UNDEFINED		cfi_ignore
+#define CFI_SIGNAL_FRAME	cfi_ignore
 
 #endif
 
+/*
+ * An attempt to make CFI annotations more or less
+ * correct and shorter. It is implied that you know
+ * what you're doing if you use them.
+ */
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_X86_64
+	.macro pushq_cfi reg
+	pushq \reg
+	CFI_ADJUST_CFA_OFFSET 8
+	.endm
+
+	.macro popq_cfi reg
+	popq \reg
+	CFI_ADJUST_CFA_OFFSET -8
+	.endm
+
+	.macro movq_cfi reg offset=0
+	movq %\reg, \offset(%rsp)
+	CFI_REL_OFFSET \reg, \offset
+	.endm
+
+	.macro movq_cfi_restore offset reg
+	movq \offset(%rsp), %\reg
+	CFI_RESTORE \reg
+	.endm
+#else /*!CONFIG_X86_64*/
+
+	/* 32bit defenitions are missed yet */
+
+#endif /*!CONFIG_X86_64*/
+#endif /*__ASSEMBLY__*/
+
 #endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b97aecb..8de644b6 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -109,9 +109,7 @@
 #endif
 #endif
 
-#ifdef CONFIG_X86_32
-extern void (*const interrupt[NR_VECTORS])(void);
-#endif
+extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
 
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index bae0eda..28e409f 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -31,10 +31,6 @@
 # endif
 #endif
 
-#ifdef CONFIG_IRQBALANCE
-extern int irqbalance_disable(char *str);
-#endif
-
 #ifdef CONFIG_HOTPLUG_CPU
 #include <linux/cpumask.h>
 extern void fixup_irqs(cpumask_t map);
diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h
index af2f02d..86afd74 100644
--- a/arch/x86/include/asm/irq_regs_32.h
+++ b/arch/x86/include/asm/irq_regs_32.h
@@ -9,6 +9,8 @@
 
 #include <asm/percpu.h>
 
+#define ARCH_HAS_OWN_IRQ_REGS
+
 DECLARE_PER_CPU(struct pt_regs *, irq_regs);
 
 static inline struct pt_regs *get_irq_regs(void)
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index f61ee8f..5d98d0b 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -57,5 +57,65 @@
 #define __ALIGN_STR ".align 16,0x90"
 #endif
 
+/*
+ * to check ENTRY_X86/END_X86 and
+ * KPROBE_ENTRY_X86/KPROBE_END_X86
+ * unbalanced-missed-mixed appearance
+ */
+#define __set_entry_x86		.set ENTRY_X86_IN, 0
+#define __unset_entry_x86	.set ENTRY_X86_IN, 1
+#define __set_kprobe_x86	.set KPROBE_X86_IN, 0
+#define __unset_kprobe_x86	.set KPROBE_X86_IN, 1
+
+#define __macro_err_x86 .error "ENTRY_X86/KPROBE_X86 unbalanced,missed,mixed"
+
+#define __check_entry_x86	\
+	.ifdef ENTRY_X86_IN;	\
+	.ifeq ENTRY_X86_IN;	\
+	__macro_err_x86;	\
+	.abort;			\
+	.endif;			\
+	.endif
+
+#define __check_kprobe_x86	\
+	.ifdef KPROBE_X86_IN;	\
+	.ifeq KPROBE_X86_IN;	\
+	__macro_err_x86;	\
+	.abort;			\
+	.endif;			\
+	.endif
+
+#define __check_entry_kprobe_x86	\
+	__check_entry_x86;		\
+	__check_kprobe_x86
+
+#define ENTRY_KPROBE_FINAL_X86 __check_entry_kprobe_x86
+
+#define ENTRY_X86(name)			\
+	__check_entry_kprobe_x86;	\
+	__set_entry_x86;		\
+	.globl name;			\
+	__ALIGN;			\
+	name:
+
+#define END_X86(name)			\
+	__unset_entry_x86;		\
+	__check_entry_kprobe_x86;	\
+	.size name, .-name
+
+#define KPROBE_ENTRY_X86(name)		\
+	__check_entry_kprobe_x86;	\
+	__set_kprobe_x86;		\
+	.pushsection .kprobes.text, "ax"; \
+	.globl name;			\
+	__ALIGN;			\
+	name:
+
+#define KPROBE_END_X86(name)		\
+	__unset_kprobe_x86;		\
+	__check_entry_kprobe_x86;	\
+	.size name, .-name;		\
+	.popsection
+
 #endif /* _ASM_X86_LINKAGE_H */
 
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 87803da..3a5252c 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -33,7 +33,7 @@
 			     struct old_sigaction __user *);
 asmlinkage int sys_sigaltstack(unsigned long);
 asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(unsigned long);
+asmlinkage int sys_rt_sigreturn(struct pt_regs);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned long);
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 9cd83a8..38ae163 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -34,8 +34,6 @@
 
 static __always_inline cycles_t vget_cycles(void)
 {
-	cycles_t cycles;
-
 	/*
 	 * We only do VDSOs on TSC capable CPUs, so this shouldnt
 	 * access boot_cpu_data (which is not VDSO-safe):
@@ -44,11 +42,7 @@
 	if (!cpu_has_tsc)
 		return 0;
 #endif
-	rdtsc_barrier();
-	cycles = (cycles_t)__native_read_tsc();
-	rdtsc_barrier();
-
-	return cycles;
+	return (cycles_t)__native_read_tsc();
 }
 
 extern void tsc_init(void);
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b62a766..3d4346a 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -12,6 +12,7 @@
 CFLAGS_REMOVE_rtc.o = -pg
 CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
 endif
 
 #
@@ -23,7 +24,7 @@
 CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 
-obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
+obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 28b597e..fe70141 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -619,28 +619,37 @@
 27:;
 
 /*
- * Build the entry stubs and pointer table with
- * some assembler magic.
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
  */
-.section .rodata,"a"
+.section .init.rodata,"a"
 ENTRY(interrupt)
 .text
-
+	.p2align 5
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
 ENTRY(irq_entries_start)
 	RING0_INT_FRAME
-vector=0
-.rept NR_VECTORS
-	ALIGN
- .if vector
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+	.balign 32
+  .rept	7
+    .if vector < NR_VECTORS
+      .if vector <> FIRST_EXTERNAL_VECTOR
 	CFI_ADJUST_CFA_OFFSET -4
- .endif
-1:	pushl $~(vector)
+      .endif
+1:	pushl $(~vector+0x80)	/* Note: always in signed byte range */
 	CFI_ADJUST_CFA_OFFSET 4
-	jmp common_interrupt
- .previous
+      .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+	jmp 2f
+      .endif
+      .previous
 	.long 1b
- .text
+      .text
 vector=vector+1
+    .endif
+  .endr
+2:	jmp common_interrupt
 .endr
 END(irq_entries_start)
 
@@ -652,8 +661,9 @@
  * the CPU automatically disables interrupts when executing an IRQ vector,
  * so IRQ-flags tracing has to follow that:
  */
-	ALIGN
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
+	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
 	SAVE_ALL
 	TRACE_IRQS_OFF
 	movl %esp,%eax
@@ -678,65 +688,6 @@
 /* The include is where all of the SMP etc. interrupts come from */
 #include "entry_arch.h"
 
-KPROBE_ENTRY(page_fault)
-	RING0_EC_FRAME
-	pushl $do_page_fault
-	CFI_ADJUST_CFA_OFFSET 4
-	ALIGN
-error_code:
-	/* the function address is in %fs's slot on the stack */
-	pushl %es
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET es, 0*/
-	pushl %ds
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET ds, 0*/
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET eax, 0
-	pushl %ebp
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ebp, 0
-	pushl %edi
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edi, 0
-	pushl %esi
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET esi, 0
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx, 0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx, 0
-	pushl %ebx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ebx, 0
-	cld
-	pushl %fs
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET fs, 0*/
-	movl $(__KERNEL_PERCPU), %ecx
-	movl %ecx, %fs
-	UNWIND_ESPFIX_STACK
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	/*CFI_REGISTER es, ecx*/
-	movl PT_FS(%esp), %edi		# get the function address
-	movl PT_ORIG_EAX(%esp), %edx	# get the error code
-	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
-	mov  %ecx, PT_FS(%esp)
-	/*CFI_REL_OFFSET fs, ES*/
-	movl $(__USER_DS), %ecx
-	movl %ecx, %ds
-	movl %ecx, %es
-	TRACE_IRQS_OFF
-	movl %esp,%eax			# pt_regs pointer
-	call *%edi
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(page_fault)
-
 ENTRY(coprocessor_error)
 	RING0_INT_FRAME
 	pushl $0
@@ -767,140 +718,6 @@
 	CFI_ENDPROC
 END(device_not_available)
 
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-#define FIX_STACK(offset, ok, label)		\
-	cmpw $__KERNEL_CS,4(%esp);		\
-	jne ok;					\
-label:						\
-	movl TSS_sysenter_sp0+offset(%esp),%esp;	\
-	CFI_DEF_CFA esp, 0;			\
-	CFI_UNDEFINED eip;			\
-	pushfl;					\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $__KERNEL_CS;			\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $sysenter_past_esp;		\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	CFI_REL_OFFSET eip, 0
-
-KPROBE_ENTRY(debug)
-	RING0_INT_FRAME
-	cmpl $ia32_sysenter_target,(%esp)
-	jne debug_stack_correct
-	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
-debug_stack_correct:
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx			# error code 0
-	movl %esp,%eax			# pt_regs pointer
-	call do_debug
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got  an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-KPROBE_ENTRY(nmi)
-	RING0_INT_FRAME
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	movl %ss, %eax
-	cmpw $__ESPFIX_SS, %ax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
-	je nmi_espfix_stack
-	cmpl $ia32_sysenter_target,(%esp)
-	je nmi_stack_fixup
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	movl %esp,%eax
-	/* Do not access memory above the end of our stack page,
-	 * it might not exist.
-	 */
-	andl $(THREAD_SIZE-1),%eax
-	cmpl $(THREAD_SIZE-20),%eax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
-	jae nmi_stack_correct
-	cmpl $ia32_sysenter_target,12(%esp)
-	je nmi_debug_stack_check
-nmi_stack_correct:
-	/* We have a RING0_INT_FRAME here */
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_nmi
-	jmp restore_nocheck_notrace
-	CFI_ENDPROC
-
-nmi_stack_fixup:
-	RING0_INT_FRAME
-	FIX_STACK(12,nmi_stack_correct, 1)
-	jmp nmi_stack_correct
-
-nmi_debug_stack_check:
-	/* We have a RING0_INT_FRAME here */
-	cmpw $__KERNEL_CS,16(%esp)
-	jne nmi_stack_correct
-	cmpl $debug,(%esp)
-	jb nmi_stack_correct
-	cmpl $debug_esp_fix_insn,(%esp)
-	ja nmi_stack_correct
-	FIX_STACK(24,nmi_stack_correct, 1)
-	jmp nmi_stack_correct
-
-nmi_espfix_stack:
-	/* We have a RING0_INT_FRAME here.
-	 *
-	 * create the pointer to lss back
-	 */
-	pushl %ss
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl %esp
-	CFI_ADJUST_CFA_OFFSET 4
-	addw $4, (%esp)
-	/* copy the iret frame of 12 bytes */
-	.rept 3
-	pushl 16(%esp)
-	CFI_ADJUST_CFA_OFFSET 4
-	.endr
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	FIXUP_ESPFIX_STACK		# %eax == %esp
-	xorl %edx,%edx			# zero error code
-	call do_nmi
-	RESTORE_REGS
-	lss 12+4(%esp), %esp		# back to espfix stack
-	CFI_ADJUST_CFA_OFFSET -24
-	jmp irq_return
-	CFI_ENDPROC
-KPROBE_END(nmi)
-
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iret
@@ -916,19 +733,6 @@
 END(native_irq_enable_sysexit)
 #endif
 
-KPROBE_ENTRY(int3)
-	RING0_INT_FRAME
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_int3
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(int3)
-
 ENTRY(overflow)
 	RING0_INT_FRAME
 	pushl $0
@@ -993,14 +797,6 @@
 	CFI_ENDPROC
 END(stack_segment)
 
-KPROBE_ENTRY(general_protection)
-	RING0_EC_FRAME
-	pushl $do_general_protection
-	CFI_ADJUST_CFA_OFFSET 4
-	jmp error_code
-	CFI_ENDPROC
-KPROBE_END(general_protection)
-
 ENTRY(alignment_check)
 	RING0_EC_FRAME
 	pushl $do_alignment_check
@@ -1051,6 +847,7 @@
 	push %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	call do_exit
+	ud2			# padding for call trace
 	CFI_ENDPROC
 ENDPROC(kernel_thread_helper)
 
@@ -1210,3 +1007,227 @@
 #include "syscall_table_32.S"
 
 syscall_table_size=(.-sys_call_table)
+
+/*
+ * Some functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+
+ENTRY(page_fault)
+	RING0_EC_FRAME
+	pushl $do_page_fault
+	CFI_ADJUST_CFA_OFFSET 4
+	ALIGN
+error_code:
+	/* the function address is in %fs's slot on the stack */
+	pushl %es
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET es, 0*/
+	pushl %ds
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ds, 0*/
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eax, 0
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp, 0
+	pushl %edi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edi, 0
+	pushl %esi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esi, 0
+	pushl %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edx, 0
+	pushl %ecx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ecx, 0
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebx, 0
+	cld
+	pushl %fs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET fs, 0*/
+	movl $(__KERNEL_PERCPU), %ecx
+	movl %ecx, %fs
+	UNWIND_ESPFIX_STACK
+	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_REGISTER es, ecx*/
+	movl PT_FS(%esp), %edi		# get the function address
+	movl PT_ORIG_EAX(%esp), %edx	# get the error code
+	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
+	mov  %ecx, PT_FS(%esp)
+	/*CFI_REL_OFFSET fs, ES*/
+	movl $(__USER_DS), %ecx
+	movl %ecx, %ds
+	movl %ecx, %es
+	TRACE_IRQS_OFF
+	movl %esp,%eax			# pt_regs pointer
+	call *%edi
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(page_fault)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label)		\
+	cmpw $__KERNEL_CS,4(%esp);		\
+	jne ok;					\
+label:						\
+	movl TSS_sysenter_sp0+offset(%esp),%esp;	\
+	CFI_DEF_CFA esp, 0;			\
+	CFI_UNDEFINED eip;			\
+	pushfl;					\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $__KERNEL_CS;			\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $sysenter_past_esp;		\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	CFI_REL_OFFSET eip, 0
+
+ENTRY(debug)
+	RING0_INT_FRAME
+	cmpl $ia32_sysenter_target,(%esp)
+	jne debug_stack_correct
+	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx			# error code 0
+	movl %esp,%eax			# pt_regs pointer
+	call do_debug
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got  an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+	RING0_INT_FRAME
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %ss, %eax
+	cmpw $__ESPFIX_SS, %ax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	je nmi_espfix_stack
+	cmpl $ia32_sysenter_target,(%esp)
+	je nmi_stack_fixup
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %esp,%eax
+	/* Do not access memory above the end of our stack page,
+	 * it might not exist.
+	 */
+	andl $(THREAD_SIZE-1),%eax
+	cmpl $(THREAD_SIZE-20),%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	jae nmi_stack_correct
+	cmpl $ia32_sysenter_target,12(%esp)
+	je nmi_debug_stack_check
+nmi_stack_correct:
+	/* We have a RING0_INT_FRAME here */
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_nmi
+	jmp restore_nocheck_notrace
+	CFI_ENDPROC
+
+nmi_stack_fixup:
+	RING0_INT_FRAME
+	FIX_STACK(12,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+	/* We have a RING0_INT_FRAME here */
+	cmpw $__KERNEL_CS,16(%esp)
+	jne nmi_stack_correct
+	cmpl $debug,(%esp)
+	jb nmi_stack_correct
+	cmpl $debug_esp_fix_insn,(%esp)
+	ja nmi_stack_correct
+	FIX_STACK(24,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_espfix_stack:
+	/* We have a RING0_INT_FRAME here.
+	 *
+	 * create the pointer to lss back
+	 */
+	pushl %ss
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl %esp
+	CFI_ADJUST_CFA_OFFSET 4
+	addw $4, (%esp)
+	/* copy the iret frame of 12 bytes */
+	.rept 3
+	pushl 16(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
+	.endr
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	FIXUP_ESPFIX_STACK		# %eax == %esp
+	xorl %edx,%edx			# zero error code
+	call do_nmi
+	RESTORE_REGS
+	lss 12+4(%esp), %esp		# back to espfix stack
+	CFI_ADJUST_CFA_OFFSET -24
+	jmp irq_return
+	CFI_ENDPROC
+END(nmi)
+
+ENTRY(int3)
+	RING0_INT_FRAME
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_int3
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(int3)
+
+ENTRY(general_protection)
+	RING0_EC_FRAME
+	pushl $do_general_protection
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(general_protection)
+
+/*
+ * End of kprobes section
+ */
+	.popsection
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b86f332..3194636 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -11,15 +11,15 @@
  *
  * NOTE: This code handles signal-recognition, which happens every time
  * after an interrupt and after each system call.
- * 
- * Normal syscalls and interrupts don't save a full stack frame, this is 
+ *
+ * Normal syscalls and interrupts don't save a full stack frame, this is
  * only done for syscall tracing, signals or fork/exec et.al.
- * 
- * A note on terminology:	 
- * - top of stack: Architecture defined interrupt frame from SS to RIP 
- * at the top of the kernel process stack.	
+ *
+ * A note on terminology:
+ * - top of stack: Architecture defined interrupt frame from SS to RIP
+ * at the top of the kernel process stack.
  * - partial stack frame: partially saved registers upto R11.
- * - full stack frame: Like partial stack frame, but all register saved. 
+ * - full stack frame: Like partial stack frame, but all register saved.
  *
  * Some macro usage:
  * - CFI macros are used to generate dwarf2 unwind information for better
@@ -60,7 +60,6 @@
 #define __AUDIT_ARCH_LE	   0x40000000
 
 	.code64
-
 #ifdef CONFIG_FUNCTION_TRACER
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
@@ -142,7 +141,7 @@
 
 #ifndef CONFIG_PREEMPT
 #define retint_kernel retint_restore_args
-#endif	
+#endif
 
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_usergs_sysret64)
@@ -161,29 +160,29 @@
 .endm
 
 /*
- * C code is not supposed to know about undefined top of stack. Every time 
- * a C function with an pt_regs argument is called from the SYSCALL based 
+ * C code is not supposed to know about undefined top of stack. Every time
+ * a C function with an pt_regs argument is called from the SYSCALL based
  * fast path FIXUP_TOP_OF_STACK is needed.
  * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
  * manipulation.
- */        	
-		
-	/* %rsp:at FRAMEEND */ 
-	.macro FIXUP_TOP_OF_STACK tmp
-	movq	%gs:pda_oldrsp,\tmp
-	movq  	\tmp,RSP(%rsp)
-	movq    $__USER_DS,SS(%rsp)
-	movq    $__USER_CS,CS(%rsp)
-	movq 	$-1,RCX(%rsp)
-	movq	R11(%rsp),\tmp  /* get eflags */
-	movq	\tmp,EFLAGS(%rsp)
+ */
+
+	/* %rsp:at FRAMEEND */
+	.macro FIXUP_TOP_OF_STACK tmp offset=0
+	movq %gs:pda_oldrsp,\tmp
+	movq \tmp,RSP+\offset(%rsp)
+	movq $__USER_DS,SS+\offset(%rsp)
+	movq $__USER_CS,CS+\offset(%rsp)
+	movq $-1,RCX+\offset(%rsp)
+	movq R11+\offset(%rsp),\tmp  /* get eflags */
+	movq \tmp,EFLAGS+\offset(%rsp)
 	.endm
 
-	.macro RESTORE_TOP_OF_STACK tmp,offset=0
-	movq   RSP-\offset(%rsp),\tmp
-	movq   \tmp,%gs:pda_oldrsp
-	movq   EFLAGS-\offset(%rsp),\tmp
-	movq   \tmp,R11-\offset(%rsp)
+	.macro RESTORE_TOP_OF_STACK tmp offset=0
+	movq RSP+\offset(%rsp),\tmp
+	movq \tmp,%gs:pda_oldrsp
+	movq EFLAGS+\offset(%rsp),\tmp
+	movq \tmp,R11+\offset(%rsp)
 	.endm
 
 	.macro FAKE_STACK_FRAME child_rip
@@ -195,7 +194,7 @@
 	pushq %rax /* rsp */
 	CFI_ADJUST_CFA_OFFSET	8
 	CFI_REL_OFFSET	rsp,0
-	pushq $(1<<9) /* eflags - interrupts on */
+	pushq $X86_EFLAGS_IF /* eflags - interrupts on */
 	CFI_ADJUST_CFA_OFFSET	8
 	/*CFI_REL_OFFSET	rflags,0*/
 	pushq $__KERNEL_CS /* cs */
@@ -213,62 +212,184 @@
 	CFI_ADJUST_CFA_OFFSET	-(6*8)
 	.endm
 
-	.macro	CFI_DEFAULT_STACK start=1
-	.if \start
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,SS+8
-	.else
-	CFI_DEF_CFA_OFFSET SS+8
-	.endif
-	CFI_REL_OFFSET	r15,R15
-	CFI_REL_OFFSET	r14,R14
-	CFI_REL_OFFSET	r13,R13
-	CFI_REL_OFFSET	r12,R12
-	CFI_REL_OFFSET	rbp,RBP
-	CFI_REL_OFFSET	rbx,RBX
-	CFI_REL_OFFSET	r11,R11
-	CFI_REL_OFFSET	r10,R10
-	CFI_REL_OFFSET	r9,R9
-	CFI_REL_OFFSET	r8,R8
-	CFI_REL_OFFSET	rax,RAX
-	CFI_REL_OFFSET	rcx,RCX
-	CFI_REL_OFFSET	rdx,RDX
-	CFI_REL_OFFSET	rsi,RSI
-	CFI_REL_OFFSET	rdi,RDI
-	CFI_REL_OFFSET	rip,RIP
-	/*CFI_REL_OFFSET	cs,CS*/
-	/*CFI_REL_OFFSET	rflags,EFLAGS*/
-	CFI_REL_OFFSET	rsp,RSP
-	/*CFI_REL_OFFSET	ss,SS*/
-	.endm
 /*
- * A newly forked process directly context switches into this.
- */ 	
-/* rdi:	prev */	
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+	.macro EMPTY_FRAME start=1 offset=0
+	.if \start
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA rsp,8+\offset
+	.else
+	CFI_DEF_CFA_OFFSET 8+\offset
+	.endif
+	.endm
+
+/*
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+	.macro INTR_FRAME start=1 offset=0
+	EMPTY_FRAME \start, SS+8+\offset-RIP
+	/*CFI_REL_OFFSET ss, SS+\offset-RIP*/
+	CFI_REL_OFFSET rsp, RSP+\offset-RIP
+	/*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
+	/*CFI_REL_OFFSET cs, CS+\offset-RIP*/
+	CFI_REL_OFFSET rip, RIP+\offset-RIP
+	.endm
+
+/*
+ * initial frame state for exceptions with error code (and interrupts
+ * with vector already pushed)
+ */
+	.macro XCPT_FRAME start=1 offset=0
+	INTR_FRAME \start, RIP+\offset-ORIG_RAX
+	/*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
+	.endm
+
+/*
+ * frame that enables calling into C.
+ */
+	.macro PARTIAL_FRAME start=1 offset=0
+	XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
+	CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
+	CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
+	CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
+	CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
+	CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
+	CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
+	.endm
+
+/*
+ * frame that enables passing a complete pt_regs to a C function.
+ */
+	.macro DEFAULT_FRAME start=1 offset=0
+	PARTIAL_FRAME \start, R11+\offset-R15
+	CFI_REL_OFFSET rbx, RBX+\offset
+	CFI_REL_OFFSET rbp, RBP+\offset
+	CFI_REL_OFFSET r12, R12+\offset
+	CFI_REL_OFFSET r13, R13+\offset
+	CFI_REL_OFFSET r14, R14+\offset
+	CFI_REL_OFFSET r15, R15+\offset
+	.endm
+
+/* save partial stack frame */
+ENTRY(save_args)
+	XCPT_FRAME
+	cld
+	movq_cfi rdi, RDI+16-ARGOFFSET
+	movq_cfi rsi, RSI+16-ARGOFFSET
+	movq_cfi rdx, RDX+16-ARGOFFSET
+	movq_cfi rcx, RCX+16-ARGOFFSET
+	movq_cfi rax, RAX+16-ARGOFFSET
+	movq_cfi  r8,  R8+16-ARGOFFSET
+	movq_cfi  r9,  R9+16-ARGOFFSET
+	movq_cfi r10, R10+16-ARGOFFSET
+	movq_cfi r11, R11+16-ARGOFFSET
+
+	leaq -ARGOFFSET+16(%rsp),%rdi	/* arg1 for handler */
+	movq_cfi rbp, 8		/* push %rbp */
+	leaq 8(%rsp), %rbp		/* mov %rsp, %ebp */
+	testl $3, CS(%rdi)
+	je 1f
+	SWAPGS
+	/*
+	 * irqcount is used to check if a CPU is already on an interrupt stack
+	 * or not. While this is essentially redundant with preempt_count it is
+	 * a little cheaper to use a separate counter in the PDA (short of
+	 * moving irq_enter into assembly, which would be too much work)
+	 */
+1:	incl %gs:pda_irqcount
+	jne 2f
+	popq_cfi %rax			/* move return address... */
+	mov %gs:pda_irqstackptr,%rsp
+	EMPTY_FRAME 0
+	pushq_cfi %rax			/* ... to the new stack */
+	/*
+	 * We entered an interrupt context - irqs are off:
+	 */
+2:	TRACE_IRQS_OFF
+	ret
+	CFI_ENDPROC
+END(save_args)
+
+ENTRY(save_rest)
+	PARTIAL_FRAME 1 REST_SKIP+8
+	movq 5*8+16(%rsp), %r11	/* save return address */
+	movq_cfi rbx, RBX+16
+	movq_cfi rbp, RBP+16
+	movq_cfi r12, R12+16
+	movq_cfi r13, R13+16
+	movq_cfi r14, R14+16
+	movq_cfi r15, R15+16
+	movq %r11, 8(%rsp)	/* return address */
+	FIXUP_TOP_OF_STACK %r11, 16
+	ret
+	CFI_ENDPROC
+END(save_rest)
+
+/* save complete stack frame */
+ENTRY(save_paranoid)
+	XCPT_FRAME 1 RDI+8
+	cld
+	movq_cfi rdi, RDI+8
+	movq_cfi rsi, RSI+8
+	movq_cfi rdx, RDX+8
+	movq_cfi rcx, RCX+8
+	movq_cfi rax, RAX+8
+	movq_cfi r8, R8+8
+	movq_cfi r9, R9+8
+	movq_cfi r10, R10+8
+	movq_cfi r11, R11+8
+	movq_cfi rbx, RBX+8
+	movq_cfi rbp, RBP+8
+	movq_cfi r12, R12+8
+	movq_cfi r13, R13+8
+	movq_cfi r14, R14+8
+	movq_cfi r15, R15+8
+	movl $1,%ebx
+	movl $MSR_GS_BASE,%ecx
+	rdmsr
+	testl %edx,%edx
+	js 1f	/* negative -> in kernel */
+	SWAPGS
+	xorl %ebx,%ebx
+1:	ret
+	CFI_ENDPROC
+END(save_paranoid)
+
+/*
+ * A newly forked process directly context switches into this address.
+ *
+ * rdi: prev task we switched from
+ */
 ENTRY(ret_from_fork)
-	CFI_DEFAULT_STACK
+	DEFAULT_FRAME
+
 	push kernel_eflags(%rip)
 	CFI_ADJUST_CFA_OFFSET 8
-	popf				# reset kernel eflags
+	popf					# reset kernel eflags
 	CFI_ADJUST_CFA_OFFSET -8
-	call schedule_tail
+
+	call schedule_tail			# rdi: 'prev' task parameter
+
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
-	jnz rff_trace
-rff_action:	
+
+	CFI_REMEMBER_STATE
 	RESTORE_REST
-	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
+
+	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
 	je   int_ret_from_sys_call
-	testl $_TIF_IA32,TI_flags(%rcx)
+
+	testl $_TIF_IA32, TI_flags(%rcx)	# 32-bit compat task needs IRET
 	jnz  int_ret_from_sys_call
-	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
-	jmp ret_from_sys_call
-rff_trace:
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	GET_THREAD_INFO(%rcx)	
-	jmp rff_action
+
+	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
+	jmp ret_from_sys_call			# go to the SYSRET fastpath
+
+	CFI_RESTORE_STATE
 	CFI_ENDPROC
 END(ret_from_fork)
 
@@ -278,20 +399,20 @@
  * SYSCALL does not save anything on the stack and does not change the
  * stack pointer.
  */
-		
+
 /*
- * Register setup:	
+ * Register setup:
  * rax  system call number
  * rdi  arg0
- * rcx  return address for syscall/sysret, C arg3 
+ * rcx  return address for syscall/sysret, C arg3
  * rsi  arg1
- * rdx  arg2	
+ * rdx  arg2
  * r10  arg3 	(--> moved to rcx for C)
  * r8   arg4
  * r9   arg5
  * r11  eflags for syscall/sysret, temporary for C
- * r12-r15,rbp,rbx saved by C code, not touched. 		
- * 
+ * r12-r15,rbp,rbx saved by C code, not touched.
+ *
  * Interrupts are off on entry.
  * Only called from user space.
  *
@@ -301,7 +422,7 @@
  * When user can change the frames always force IRET. That is because
  * it deals with uncanonical addresses better. SYSRET has trouble
  * with them due to bugs in both AMD and Intel CPUs.
- */ 			 		
+ */
 
 ENTRY(system_call)
 	CFI_STARTPROC	simple
@@ -317,7 +438,7 @@
 	 */
 ENTRY(system_call_after_swapgs)
 
-	movq	%rsp,%gs:pda_oldrsp 
+	movq	%rsp,%gs:pda_oldrsp
 	movq	%gs:pda_kernelstack,%rsp
 	/*
 	 * No need to follow this irqs off/on section - it's straight
@@ -325,7 +446,7 @@
 	 */
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_ARGS 8,1
-	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp) 
+	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
 	GET_THREAD_INFO(%rcx)
@@ -339,19 +460,19 @@
 	movq %rax,RAX-ARGOFFSET(%rsp)
 /*
  * Syscall return path ending with SYSRET (fast path)
- * Has incomplete stack frame and undefined top of stack. 
- */		
+ * Has incomplete stack frame and undefined top of stack.
+ */
 ret_from_sys_call:
 	movl $_TIF_ALLWORK_MASK,%edi
 	/* edi:	flagmask */
-sysret_check:		
+sysret_check:
 	LOCKDEP_SYS_EXIT
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
-	jnz  sysret_careful 
+	jnz  sysret_careful
 	CFI_REMEMBER_STATE
 	/*
 	 * sysretq will re-enable interrupts:
@@ -366,7 +487,7 @@
 
 	CFI_RESTORE_STATE
 	/* Handle reschedules */
-	/* edx:	work, edi: workmask */	
+	/* edx:	work, edi: workmask */
 sysret_careful:
 	bt $TIF_NEED_RESCHED,%edx
 	jnc sysret_signal
@@ -379,7 +500,7 @@
 	CFI_ADJUST_CFA_OFFSET -8
 	jmp sysret_check
 
-	/* Handle a signal */ 
+	/* Handle a signal */
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
@@ -388,17 +509,20 @@
 	jc sysret_audit
 #endif
 	/* edx:	work flags (arg3) */
-	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
-	call ptregscall_common
+	SAVE_REST
+	FIXUP_TOP_OF_STACK %r11
+	call do_notify_resume
+	RESTORE_TOP_OF_STACK %r11
+	RESTORE_REST
 	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp int_with_check
-	
+
 badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
 	jmp ret_from_sys_call
@@ -437,7 +561,7 @@
 #endif	/* CONFIG_AUDITSYSCALL */
 
 	/* Do syscall tracing */
-tracesys:			 
+tracesys:
 #ifdef CONFIG_AUDITSYSCALL
 	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
 	jz auditsys
@@ -460,8 +584,8 @@
 	call *sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
 	/* Use IRET because user could have changed frame */
-		
-/* 
+
+/*
  * Syscall return path ending with IRET.
  * Has correct top of stack, but partial stack frame.
  */
@@ -505,18 +629,18 @@
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
-	/* Check for syscall exit trace */	
+	/* Check for syscall exit trace */
 	testl $_TIF_WORK_SYSCALL_EXIT,%edx
 	jz int_signal
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
-	leaq 8(%rsp),%rdi	# &ptregs -> arg1	
+	leaq 8(%rsp),%rdi	# &ptregs -> arg1
 	call syscall_trace_leave
 	popq %rdi
 	CFI_ADJUST_CFA_OFFSET -8
 	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
 	jmp int_restore_rest
-	
+
 int_signal:
 	testl $_TIF_DO_NOTIFY_MASK,%edx
 	jz 1f
@@ -531,22 +655,24 @@
 	jmp int_with_check
 	CFI_ENDPROC
 END(system_call)
-		
-/* 
+
+/*
  * Certain special system calls that need to save a complete full stack frame.
- */ 								
-	
+ */
 	.macro PTREGSCALL label,func,arg
-	.globl \label
-\label:
-	leaq	\func(%rip),%rax
-	leaq    -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
-	jmp	ptregscall_common
+ENTRY(\label)
+	PARTIAL_FRAME 1 8		/* offset 8: return address */
+	subq $REST_SKIP, %rsp
+	CFI_ADJUST_CFA_OFFSET REST_SKIP
+	call save_rest
+	DEFAULT_FRAME 0 8		/* offset 8: return address */
+	leaq 8(%rsp), \arg	/* pt_regs pointer */
+	call \func
+	jmp ptregscall_common
+	CFI_ENDPROC
 END(\label)
 	.endm
 
-	CFI_STARTPROC
-
 	PTREGSCALL stub_clone, sys_clone, %r8
 	PTREGSCALL stub_fork, sys_fork, %rdi
 	PTREGSCALL stub_vfork, sys_vfork, %rdi
@@ -554,25 +680,18 @@
 	PTREGSCALL stub_iopl, sys_iopl, %rsi
 
 ENTRY(ptregscall_common)
-	popq %r11
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_REGISTER rip, r11
-	SAVE_REST
-	movq %r11, %r15
-	CFI_REGISTER rip, r15
-	FIXUP_TOP_OF_STACK %r11
-	call *%rax
-	RESTORE_TOP_OF_STACK %r11
-	movq %r15, %r11
-	CFI_REGISTER rip, r11
-	RESTORE_REST
-	pushq %r11
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rip, 0
-	ret
+	DEFAULT_FRAME 1 8	/* offset 8: return address */
+	RESTORE_TOP_OF_STACK %r11, 8
+	movq_cfi_restore R15+8, r15
+	movq_cfi_restore R14+8, r14
+	movq_cfi_restore R13+8, r13
+	movq_cfi_restore R12+8, r12
+	movq_cfi_restore RBP+8, rbp
+	movq_cfi_restore RBX+8, rbx
+	ret $REST_SKIP		/* pop extended registers */
 	CFI_ENDPROC
 END(ptregscall_common)
-	
+
 ENTRY(stub_execve)
 	CFI_STARTPROC
 	popq %r11
@@ -588,11 +707,11 @@
 	jmp int_ret_from_sys_call
 	CFI_ENDPROC
 END(stub_execve)
-	
+
 /*
  * sigreturn is special because it needs to restore all registers on return.
  * This cannot be done with SYSRET, so use the IRET return path instead.
- */                
+ */
 ENTRY(stub_rt_sigreturn)
 	CFI_STARTPROC
 	addq $8, %rsp
@@ -608,70 +727,70 @@
 END(stub_rt_sigreturn)
 
 /*
- * initial frame state for interrupts and exceptions
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
  */
-	.macro _frame ref
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,SS+8-\ref
-	/*CFI_REL_OFFSET ss,SS-\ref*/
-	CFI_REL_OFFSET rsp,RSP-\ref
-	/*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
-	/*CFI_REL_OFFSET cs,CS-\ref*/
-	CFI_REL_OFFSET rip,RIP-\ref
-	.endm
+	.section .init.rodata,"a"
+ENTRY(interrupt)
+	.text
+	.p2align 5
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+ENTRY(irq_entries_start)
+	INTR_FRAME
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+	.balign 32
+  .rept	7
+    .if vector < NR_VECTORS
+      .if vector <> FIRST_EXTERNAL_VECTOR
+	CFI_ADJUST_CFA_OFFSET -8
+      .endif
+1:	pushq $(~vector+0x80)	/* Note: always in signed byte range */
+	CFI_ADJUST_CFA_OFFSET 8
+      .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+	jmp 2f
+      .endif
+      .previous
+	.quad 1b
+      .text
+vector=vector+1
+    .endif
+  .endr
+2:	jmp common_interrupt
+.endr
+	CFI_ENDPROC
+END(irq_entries_start)
 
-/* initial frame state for interrupts (and exceptions without error code) */
-#define INTR_FRAME _frame RIP
-/* initial frame state for exceptions with error code (and interrupts with
-   vector already pushed) */
-#define XCPT_FRAME _frame ORIG_RAX
+.previous
+END(interrupt)
+.previous
 
-/* 
+/*
  * Interrupt entry/exit.
  *
  * Interrupt entry points save only callee clobbered registers in fast path.
- *	
- * Entry runs with interrupts off.	
- */ 
+ *
+ * Entry runs with interrupts off.
+ */
 
-/* 0(%rsp): interrupt number */ 
+/* 0(%rsp): ~(interrupt number) */
 	.macro interrupt func
-	cld
-	SAVE_ARGS
-	leaq -ARGOFFSET(%rsp),%rdi	# arg1 for handler
-	pushq %rbp
-	/*
-	 * Save rbp twice: One is for marking the stack frame, as usual, and the
-	 * other, to fill pt_regs properly. This is because bx comes right
-	 * before the last saved register in that structure, and not bp. If the
-	 * base pointer were in the place bx is today, this would not be needed.
-	 */
-	movq %rbp, -8(%rsp)
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET		rbp, 0
-	movq %rsp,%rbp
-	CFI_DEF_CFA_REGISTER	rbp
-	testl $3,CS(%rdi)
-	je 1f
-	SWAPGS
-	/* irqcount is used to check if a CPU is already on an interrupt
-	   stack or not. While this is essentially redundant with preempt_count
-	   it is a little cheaper to use a separate counter in the PDA
-	   (short of moving irq_enter into assembly, which would be too
-	    much work) */
-1:	incl	%gs:pda_irqcount
-	cmoveq %gs:pda_irqstackptr,%rsp
-	push    %rbp			# backlink for old unwinder
-	/*
-	 * We entered an interrupt context - irqs are off:
-	 */
-	TRACE_IRQS_OFF
+	subq $10*8, %rsp
+	CFI_ADJUST_CFA_OFFSET 10*8
+	call save_args
+	PARTIAL_FRAME 0
 	call \func
 	.endm
 
-ENTRY(common_interrupt)
+	/*
+	 * The interrupt stubs push (~vector+0x80) onto the stack and
+	 * then jump to common_interrupt.
+	 */
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
 	XCPT_FRAME
+	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
 	/* 0(%rsp): oldrsp-ARGOFFSET */
 ret_from_intr:
@@ -685,12 +804,12 @@
 	GET_THREAD_INFO(%rcx)
 	testl $3,CS-ARGOFFSET(%rsp)
 	je retint_kernel
-	
+
 	/* Interrupt came from user space */
 	/*
 	 * Has a correct top of stack, but a partial stack frame
 	 * %rcx: thread info. Interrupts off.
-	 */		
+	 */
 retint_with_reschedule:
 	movl $_TIF_WORK_MASK,%edi
 retint_check:
@@ -763,20 +882,20 @@
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET	8
 	call  schedule
-	popq %rdi		
+	popq %rdi
 	CFI_ADJUST_CFA_OFFSET	-8
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp retint_check
-	
+
 retint_signal:
 	testl $_TIF_DO_NOTIFY_MASK,%edx
 	jz    retint_swapgs
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
-	movq $-1,ORIG_RAX(%rsp) 			
+	movq $-1,ORIG_RAX(%rsp)
 	xorl %esi,%esi		# oldset
 	movq %rsp,%rdi		# &pt_regs
 	call do_notify_resume
@@ -798,324 +917,211 @@
 	jnc  retint_restore_args
 	call preempt_schedule_irq
 	jmp exit_intr
-#endif	
+#endif
 
 	CFI_ENDPROC
 END(common_interrupt)
-	
+
 /*
  * APIC interrupts.
- */		
-	.macro apicinterrupt num,func
+ */
+.macro apicinterrupt num sym do_sym
+ENTRY(\sym)
 	INTR_FRAME
 	pushq $~(\num)
 	CFI_ADJUST_CFA_OFFSET 8
-	interrupt \func
+	interrupt \do_sym
 	jmp ret_from_intr
 	CFI_ENDPROC
-	.endm
+END(\sym)
+.endm
 
-ENTRY(thermal_interrupt)
-	apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
-END(thermal_interrupt)
-
-ENTRY(threshold_interrupt)
-	apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
-END(threshold_interrupt)
-
-#ifdef CONFIG_SMP	
-ENTRY(reschedule_interrupt)
-	apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
-END(reschedule_interrupt)
-
-	.macro INVALIDATE_ENTRY num
-ENTRY(invalidate_interrupt\num)
-	apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt	
-END(invalidate_interrupt\num)
-	.endm
-
-	INVALIDATE_ENTRY 0
-	INVALIDATE_ENTRY 1
-	INVALIDATE_ENTRY 2
-	INVALIDATE_ENTRY 3
-	INVALIDATE_ENTRY 4
-	INVALIDATE_ENTRY 5
-	INVALIDATE_ENTRY 6
-	INVALIDATE_ENTRY 7
-
-ENTRY(call_function_interrupt)
-	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
-END(call_function_interrupt)
-ENTRY(call_function_single_interrupt)
-	apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
-END(call_function_single_interrupt)
-ENTRY(irq_move_cleanup_interrupt)
-	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
-END(irq_move_cleanup_interrupt)
+#ifdef CONFIG_SMP
+apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
+	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
 #endif
 
-ENTRY(apic_timer_interrupt)
-	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
-END(apic_timer_interrupt)
+apicinterrupt UV_BAU_MESSAGE \
+	uv_bau_message_intr1 uv_bau_message_interrupt
+apicinterrupt LOCAL_TIMER_VECTOR \
+	apic_timer_interrupt smp_apic_timer_interrupt
 
-ENTRY(uv_bau_message_intr1)
-	apicinterrupt 220,uv_bau_message_interrupt
-END(uv_bau_message_intr1)
+#ifdef CONFIG_SMP
+apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
+	invalidate_interrupt0 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \
+	invalidate_interrupt1 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \
+	invalidate_interrupt2 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \
+	invalidate_interrupt3 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \
+	invalidate_interrupt4 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \
+	invalidate_interrupt5 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \
+	invalidate_interrupt6 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
+	invalidate_interrupt7 smp_invalidate_interrupt
+#endif
 
-ENTRY(error_interrupt)
-	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
-END(error_interrupt)
+apicinterrupt THRESHOLD_APIC_VECTOR \
+	threshold_interrupt mce_threshold_interrupt
+apicinterrupt THERMAL_APIC_VECTOR \
+	thermal_interrupt smp_thermal_interrupt
 
-ENTRY(spurious_interrupt)
-	apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
-END(spurious_interrupt)
-				
+#ifdef CONFIG_SMP
+apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
+	call_function_single_interrupt smp_call_function_single_interrupt
+apicinterrupt CALL_FUNCTION_VECTOR \
+	call_function_interrupt smp_call_function_interrupt
+apicinterrupt RESCHEDULE_VECTOR \
+	reschedule_interrupt smp_reschedule_interrupt
+#endif
+
+apicinterrupt ERROR_APIC_VECTOR \
+	error_interrupt smp_error_interrupt
+apicinterrupt SPURIOUS_APIC_VECTOR \
+	spurious_interrupt smp_spurious_interrupt
+
 /*
  * Exception entry points.
- */ 		
-	.macro zeroentry sym
+ */
+.macro zeroentry sym do_sym
+ENTRY(\sym)
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0	/* push error code/oldrax */ 
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %rax	/* push real oldrax to the rdi slot */ 
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
+	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call error_entry
+	DEFAULT_FRAME 0
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	call \do_sym
+	jmp error_exit		/* %ebx: no swapgs flag */
 	CFI_ENDPROC
-	.endm	
+END(\sym)
+.endm
 
-	.macro errorentry sym
+.macro paranoidzeroentry sym do_sym
+ENTRY(\sym)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq $-1		/* ORIG_RAX: no syscall to restart */
+	CFI_ADJUST_CFA_OFFSET 8
+	subq $15*8, %rsp
+	call save_paranoid
+	TRACE_IRQS_OFF
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	call \do_sym
+	jmp paranoid_exit	/* %ebx: no swapgs flag */
+	CFI_ENDPROC
+END(\sym)
+.endm
+
+.macro paranoidzeroentry_ist sym do_sym ist
+ENTRY(\sym)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq $-1		/* ORIG_RAX: no syscall to restart */
+	CFI_ADJUST_CFA_OFFSET 8
+	subq $15*8, %rsp
+	call save_paranoid
+	TRACE_IRQS_OFF
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	movq %gs:pda_data_offset, %rbp
+	subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	call \do_sym
+	addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	jmp paranoid_exit	/* %ebx: no swapgs flag */
+	CFI_ENDPROC
+END(\sym)
+.endm
+
+.macro errorentry sym do_sym
+ENTRY(\sym)
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq %rax
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call error_entry
+	DEFAULT_FRAME 0
+	movq %rsp,%rdi			/* pt_regs pointer */
+	movq ORIG_RAX(%rsp),%rsi	/* get error code */
+	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
+	call \do_sym
+	jmp error_exit			/* %ebx: no swapgs flag */
 	CFI_ENDPROC
-	.endm
+END(\sym)
+.endm
 
 	/* error code is on the stack already */
-	/* handle NMI like exceptions that can happen everywhere */
-	.macro paranoidentry sym, ist=0, irqtrace=1
-	SAVE_ALL
-	cld
-	movl $1,%ebx
-	movl  $MSR_GS_BASE,%ecx
-	rdmsr
-	testl %edx,%edx
-	js    1f
-	SWAPGS
-	xorl  %ebx,%ebx
-1:
-	.if \ist
-	movq	%gs:pda_data_offset, %rbp
-	.endif
-	.if \irqtrace
+.macro paranoiderrorentry sym do_sym
+ENTRY(\sym)
+	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call save_paranoid
+	DEFAULT_FRAME 0
 	TRACE_IRQS_OFF
-	.endif
-	movq %rsp,%rdi
-	movq ORIG_RAX(%rsp),%rsi
-	movq $-1,ORIG_RAX(%rsp)
-	.if \ist
-	subq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	call \sym
-	.if \ist
-	addq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	.if \irqtrace
-	TRACE_IRQS_OFF
-	.endif
-	.endm
-
-	/*
- 	 * "Paranoid" exit path from exception stack.
-  	 * Paranoid because this is used by NMIs and cannot take
-	 * any kernel state for granted.
-	 * We don't do kernel preemption checks here, because only
-	 * NMI should be common and it does not enable IRQs and
-	 * cannot get reschedule ticks.
-	 *
-	 * "trace" is 0 for the NMI handler only, because irq-tracing
-	 * is fundamentally NMI-unsafe. (we cannot change the soft and
-	 * hard flags at once, atomically)
-	 */
-	.macro paranoidexit trace=1
-	/* ebx:	no swapgs flag */
-paranoid_exit\trace:
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz paranoid_restore\trace
-	testl $3,CS(%rsp)
-	jnz   paranoid_userspace\trace
-paranoid_swapgs\trace:
-	.if \trace
-	TRACE_IRQS_IRETQ 0
-	.endif
-	SWAPGS_UNSAFE_STACK
-paranoid_restore\trace:
-	RESTORE_ALL 8
-	jmp irq_return
-paranoid_userspace\trace:
-	GET_THREAD_INFO(%rcx)
-	movl TI_flags(%rcx),%ebx
-	andl $_TIF_WORK_MASK,%ebx
-	jz paranoid_swapgs\trace
-	movq %rsp,%rdi			/* &pt_regs */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack for scheduling */
-	testl $_TIF_NEED_RESCHED,%ebx
-	jnz paranoid_schedule\trace
-	movl %ebx,%edx			/* arg3: thread flags */
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	xorl %esi,%esi 			/* arg2: oldset */
-	movq %rsp,%rdi 			/* arg1: &pt_regs */
-	call do_notify_resume
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
-paranoid_schedule\trace:
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	call schedule
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
+	movq %rsp,%rdi			/* pt_regs pointer */
+	movq ORIG_RAX(%rsp),%rsi	/* get error code */
+	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
+	call \do_sym
+	jmp paranoid_exit		/* %ebx: no swapgs flag */
 	CFI_ENDPROC
-	.endm
+END(\sym)
+.endm
 
-/*
- * Exception entry point. This expects an error code/orig_rax on the stack
- * and the exception handler in %rax.	
- */ 		  				
-KPROBE_ENTRY(error_entry)
-	_frame RDI
-	CFI_REL_OFFSET rax,0
-	/* rdi slot contains rax, oldrax contains error code */
-	cld	
-	subq  $14*8,%rsp
-	CFI_ADJUST_CFA_OFFSET	(14*8)
-	movq %rsi,13*8(%rsp)
-	CFI_REL_OFFSET	rsi,RSI
-	movq 14*8(%rsp),%rsi	/* load rax from rdi slot */
-	CFI_REGISTER	rax,rsi
-	movq %rdx,12*8(%rsp)
-	CFI_REL_OFFSET	rdx,RDX
-	movq %rcx,11*8(%rsp)
-	CFI_REL_OFFSET	rcx,RCX
-	movq %rsi,10*8(%rsp)	/* store rax */ 
-	CFI_REL_OFFSET	rax,RAX
-	movq %r8, 9*8(%rsp)
-	CFI_REL_OFFSET	r8,R8
-	movq %r9, 8*8(%rsp)
-	CFI_REL_OFFSET	r9,R9
-	movq %r10,7*8(%rsp)
-	CFI_REL_OFFSET	r10,R10
-	movq %r11,6*8(%rsp)
-	CFI_REL_OFFSET	r11,R11
-	movq %rbx,5*8(%rsp) 
-	CFI_REL_OFFSET	rbx,RBX
-	movq %rbp,4*8(%rsp) 
-	CFI_REL_OFFSET	rbp,RBP
-	movq %r12,3*8(%rsp) 
-	CFI_REL_OFFSET	r12,R12
-	movq %r13,2*8(%rsp) 
-	CFI_REL_OFFSET	r13,R13
-	movq %r14,1*8(%rsp) 
-	CFI_REL_OFFSET	r14,R14
-	movq %r15,(%rsp) 
-	CFI_REL_OFFSET	r15,R15
-	xorl %ebx,%ebx	
-	testl $3,CS(%rsp)
-	je  error_kernelspace
-error_swapgs:	
-	SWAPGS
-error_sti:
-	TRACE_IRQS_OFF
-	movq %rdi,RDI(%rsp) 	
-	CFI_REL_OFFSET	rdi,RDI
-	movq %rsp,%rdi
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */ 
-	movq $-1,ORIG_RAX(%rsp)
-	call *%rax
-	/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */
-error_exit:
-	movl %ebx,%eax
-	RESTORE_REST
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)	
-	testl %eax,%eax
-	jne  retint_kernel
-	LOCKDEP_SYS_EXIT_IRQ
-	movl  TI_flags(%rcx),%edx
-	movl  $_TIF_WORK_MASK,%edi
-	andl  %edi,%edx
-	jnz  retint_careful
-	jmp retint_swapgs
-	CFI_ENDPROC
+zeroentry divide_error do_divide_error
+zeroentry overflow do_overflow
+zeroentry bounds do_bounds
+zeroentry invalid_op do_invalid_op
+zeroentry device_not_available do_device_not_available
+paranoiderrorentry double_fault do_double_fault
+zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
+errorentry invalid_TSS do_invalid_TSS
+errorentry segment_not_present do_segment_not_present
+zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
+zeroentry coprocessor_error do_coprocessor_error
+errorentry alignment_check do_alignment_check
+zeroentry simd_coprocessor_error do_simd_coprocessor_error
 
-error_kernelspace:
-	incl %ebx
-       /* There are two places in the kernel that can potentially fault with
-          usergs. Handle them here. The exception handlers after
-	   iret run with kernel gs again, so don't set the user space flag.
-	   B stepping K8s sometimes report an truncated RIP for IRET 
-	   exceptions returning to compat mode. Check for these here too. */
-	leaq irq_return(%rip),%rcx
-	cmpq %rcx,RIP(%rsp)
-	je   error_swapgs
-	movl %ecx,%ecx	/* zero extend */
-	cmpq %rcx,RIP(%rsp)
-	je   error_swapgs
-	cmpq $gs_change,RIP(%rsp)
-        je   error_swapgs
-	jmp  error_sti
-KPROBE_END(error_entry)
-	
-       /* Reload gs selector with exception handling */
-       /* edi:  new selector */ 
+	/* Reload gs selector with exception handling */
+	/* edi:  new selector */
 ENTRY(native_load_gs_index)
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
 	DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
-        SWAPGS
-gs_change:     
-        movl %edi,%gs   
+	SWAPGS
+gs_change:
+	movl %edi,%gs
 2:	mfence		/* workaround */
 	SWAPGS
-        popf
+	popf
 	CFI_ADJUST_CFA_OFFSET -8
-        ret
+	ret
 	CFI_ENDPROC
-ENDPROC(native_load_gs_index)
-       
-        .section __ex_table,"a"
-        .align 8
-        .quad gs_change,bad_gs
-        .previous
-        .section .fixup,"ax"
+END(native_load_gs_index)
+
+	.section __ex_table,"a"
+	.align 8
+	.quad gs_change,bad_gs
+	.previous
+	.section .fixup,"ax"
 	/* running with kernelgs */
-bad_gs: 
+bad_gs:
 	SWAPGS			/* switch back to user gs */
 	xorl %eax,%eax
-        movl %eax,%gs
-        jmp  2b
-        .previous       
-	
+	movl %eax,%gs
+	jmp  2b
+	.previous
+
 /*
  * Create a kernel thread.
  *
@@ -1138,7 +1144,7 @@
 
 	xorl %r8d,%r8d
 	xorl %r9d,%r9d
-	
+
 	# clone now
 	call do_fork
 	movq %rax,RAX(%rsp)
@@ -1149,15 +1155,15 @@
 	 * so internally to the x86_64 port you can rely on kernel_thread()
 	 * not to reschedule the child before returning, this avoids the need
 	 * of hacks for example to fork off the per-CPU idle tasks.
-         * [Hopefully no generic code relies on the reschedule -AK]	
+	 * [Hopefully no generic code relies on the reschedule -AK]
 	 */
 	RESTORE_ALL
 	UNFAKE_STACK_FRAME
 	ret
 	CFI_ENDPROC
-ENDPROC(kernel_thread)
-	
-child_rip:
+END(kernel_thread)
+
+ENTRY(child_rip)
 	pushq $0		# fake return address
 	CFI_STARTPROC
 	/*
@@ -1170,8 +1176,9 @@
 	# exit
 	mov %eax, %edi
 	call do_exit
+	ud2			# padding for call trace
 	CFI_ENDPROC
-ENDPROC(child_rip)
+END(child_rip)
 
 /*
  * execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
@@ -1191,10 +1198,10 @@
 ENTRY(kernel_execve)
 	CFI_STARTPROC
 	FAKE_STACK_FRAME $0
-	SAVE_ALL	
+	SAVE_ALL
 	movq %rsp,%rcx
 	call sys_execve
-	movq %rax, RAX(%rsp)	
+	movq %rax, RAX(%rsp)
 	RESTORE_REST
 	testq %rax,%rax
 	je int_ret_from_sys_call
@@ -1202,129 +1209,7 @@
 	UNFAKE_STACK_FRAME
 	ret
 	CFI_ENDPROC
-ENDPROC(kernel_execve)
-
-KPROBE_ENTRY(page_fault)
-	errorentry do_page_fault
-KPROBE_END(page_fault)
-
-ENTRY(coprocessor_error)
-	zeroentry do_coprocessor_error
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
-	zeroentry do_simd_coprocessor_error	
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
-	zeroentry do_device_not_available
-END(device_not_available)
-
-	/* runs on exception stack */
-KPROBE_ENTRY(debug)
- 	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8		
-	paranoidentry do_debug, DEBUG_STACK
-	paranoidexit
-KPROBE_END(debug)
-
-	/* runs on exception stack */	
-KPROBE_ENTRY(nmi)
-	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $-1
-	CFI_ADJUST_CFA_OFFSET 8
-	paranoidentry do_nmi, 0, 0
-#ifdef CONFIG_TRACE_IRQFLAGS
-	paranoidexit 0
-#else
-	jmp paranoid_exit1
- 	CFI_ENDPROC
-#endif
-KPROBE_END(nmi)
-
-KPROBE_ENTRY(int3)
- 	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
- 	pushq $0
- 	CFI_ADJUST_CFA_OFFSET 8
- 	paranoidentry do_int3, DEBUG_STACK
- 	jmp paranoid_exit1
- 	CFI_ENDPROC
-KPROBE_END(int3)
-
-ENTRY(overflow)
-	zeroentry do_overflow
-END(overflow)
-
-ENTRY(bounds)
-	zeroentry do_bounds
-END(bounds)
-
-ENTRY(invalid_op)
-	zeroentry do_invalid_op	
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
-	zeroentry do_coprocessor_segment_overrun
-END(coprocessor_segment_overrun)
-
-	/* runs on exception stack */
-ENTRY(double_fault)
-	XCPT_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	paranoidentry do_double_fault
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(double_fault)
-
-ENTRY(invalid_TSS)
-	errorentry do_invalid_TSS
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
-	errorentry do_segment_not_present
-END(segment_not_present)
-
-	/* runs on exception stack */
-ENTRY(stack_segment)
-	XCPT_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	paranoidentry do_stack_segment
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(stack_segment)
-
-KPROBE_ENTRY(general_protection)
-	errorentry do_general_protection
-KPROBE_END(general_protection)
-
-ENTRY(alignment_check)
-	errorentry do_alignment_check
-END(alignment_check)
-
-ENTRY(divide_error)
-	zeroentry do_divide_error
-END(divide_error)
-
-ENTRY(spurious_interrupt_bug)
-	zeroentry do_spurious_interrupt_bug
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_X86_MCE
-	/* runs on exception stack */
-ENTRY(machine_check)
-	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8	
-	paranoidentry do_machine_check
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(machine_check)
-#endif
+END(kernel_execve)
 
 /* Call softirq on interrupt stack. Interrupts are off. */
 ENTRY(call_softirq)
@@ -1344,40 +1229,33 @@
 	decl %gs:pda_irqcount
 	ret
 	CFI_ENDPROC
-ENDPROC(call_softirq)
-
-KPROBE_ENTRY(ignore_sysret)
-	CFI_STARTPROC
-	mov $-ENOSYS,%eax
-	sysret
-	CFI_ENDPROC
-ENDPROC(ignore_sysret)
+END(call_softirq)
 
 #ifdef CONFIG_XEN
-ENTRY(xen_hypervisor_callback)
-	zeroentry xen_do_hypervisor_callback
-END(xen_hypervisor_callback)
+zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
 
 /*
-# A note on the "critical region" in our callback handler.
-# We want to avoid stacking callback handlers due to events occurring
-# during handling of the last event. To do this, we keep events disabled
-# until we've done all processing. HOWEVER, we must enable events before
-# popping the stack frame (can't be done atomically) and so it would still
-# be possible to get enough handler activations to overflow the stack.
-# Although unlikely, bugs of that kind are hard to track down, so we'd
-# like to avoid the possibility.
-# So, on entry to the handler we detect whether we interrupted an
-# existing activation in its critical region -- if so, we pop the current
-# activation and restart the handler using the previous one.
-*/
+ * A note on the "critical region" in our callback handler.
+ * We want to avoid stacking callback handlers due to events occurring
+ * during handling of the last event. To do this, we keep events disabled
+ * until we've done all processing. HOWEVER, we must enable events before
+ * popping the stack frame (can't be done atomically) and so it would still
+ * be possible to get enough handler activations to overflow the stack.
+ * Although unlikely, bugs of that kind are hard to track down, so we'd
+ * like to avoid the possibility.
+ * So, on entry to the handler we detect whether we interrupted an
+ * existing activation in its critical region -- if so, we pop the current
+ * activation and restart the handler using the previous one.
+ */
 ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 	CFI_STARTPROC
-/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
-   see the correct pointer to the pt_regs */
+/*
+ * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ * see the correct pointer to the pt_regs
+ */
 	movq %rdi, %rsp            # we don't return, adjust the stack frame
 	CFI_ENDPROC
-	CFI_DEFAULT_STACK
+	DEFAULT_FRAME
 11:	incl %gs:pda_irqcount
 	movq %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
@@ -1392,23 +1270,26 @@
 END(do_hypervisor_callback)
 
 /*
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-#  1. Fault while reloading DS, ES, FS or GS
-#  2. Fault while executing IRET
-# Category 1 we do not need to fix up as Xen has already reloaded all segment
-# registers that could be reloaded and zeroed the others.
-# Category 2 we fix up by killing the current process. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by comparing each saved segment register
-# with its current contents: any discrepancy means we in category 1.
-*/
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ *  1. Fault while reloading DS, ES, FS or GS
+ *  2. Fault while executing IRET
+ * Category 1 we do not need to fix up as Xen has already reloaded all segment
+ * registers that could be reloaded and zeroed the others.
+ * Category 2 we fix up by killing the current process. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by comparing each saved segment register
+ * with its current contents: any discrepancy means we in category 1.
+ */
 ENTRY(xen_failsafe_callback)
-	framesz = (RIP-0x30)	/* workaround buggy gas */
-	_frame framesz
-	CFI_REL_OFFSET rcx, 0
-	CFI_REL_OFFSET r11, 8
+	INTR_FRAME 1 (6*8)
+	/*CFI_REL_OFFSET gs,GS*/
+	/*CFI_REL_OFFSET fs,FS*/
+	/*CFI_REL_OFFSET es,ES*/
+	/*CFI_REL_OFFSET ds,DS*/
+	CFI_REL_OFFSET r11,8
+	CFI_REL_OFFSET rcx,0
 	movw %ds,%cx
 	cmpw %cx,0x10(%rsp)
 	CFI_REMEMBER_STATE
@@ -1429,12 +1310,9 @@
 	CFI_RESTORE r11
 	addq $0x30,%rsp
 	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %r11
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %rcx
-	CFI_ADJUST_CFA_OFFSET 8
+	pushq_cfi $0	/* RIP */
+	pushq_cfi %r11
+	pushq_cfi %rcx
 	jmp general_protection
 	CFI_RESTORE_STATE
 1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
@@ -1444,11 +1322,223 @@
 	CFI_RESTORE r11
 	addq $0x30,%rsp
 	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
+	pushq_cfi $0
 	SAVE_ALL
 	jmp error_exit
 	CFI_ENDPROC
 END(xen_failsafe_callback)
 
 #endif /* CONFIG_XEN */
+
+/*
+ * Some functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+
+paranoidzeroentry_ist debug do_debug DEBUG_STACK
+paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
+paranoiderrorentry stack_segment do_stack_segment
+errorentry general_protection do_general_protection
+errorentry page_fault do_page_fault
+#ifdef CONFIG_X86_MCE
+paranoidzeroentry machine_check do_machine_check
+#endif
+
+	/*
+	 * "Paranoid" exit path from exception stack.
+	 * Paranoid because this is used by NMIs and cannot take
+	 * any kernel state for granted.
+	 * We don't do kernel preemption checks here, because only
+	 * NMI should be common and it does not enable IRQs and
+	 * cannot get reschedule ticks.
+	 *
+	 * "trace" is 0 for the NMI handler only, because irq-tracing
+	 * is fundamentally NMI-unsafe. (we cannot change the soft and
+	 * hard flags at once, atomically)
+	 */
+
+	/* ebx:	no swapgs flag */
+ENTRY(paranoid_exit)
+	INTR_FRAME
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	testl %ebx,%ebx				/* swapgs needed? */
+	jnz paranoid_restore
+	testl $3,CS(%rsp)
+	jnz   paranoid_userspace
+paranoid_swapgs:
+	TRACE_IRQS_IRETQ 0
+	SWAPGS_UNSAFE_STACK
+paranoid_restore:
+	RESTORE_ALL 8
+	jmp irq_return
+paranoid_userspace:
+	GET_THREAD_INFO(%rcx)
+	movl TI_flags(%rcx),%ebx
+	andl $_TIF_WORK_MASK,%ebx
+	jz paranoid_swapgs
+	movq %rsp,%rdi			/* &pt_regs */
+	call sync_regs
+	movq %rax,%rsp			/* switch stack for scheduling */
+	testl $_TIF_NEED_RESCHED,%ebx
+	jnz paranoid_schedule
+	movl %ebx,%edx			/* arg3: thread flags */
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	xorl %esi,%esi 			/* arg2: oldset */
+	movq %rsp,%rdi 			/* arg1: &pt_regs */
+	call do_notify_resume
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	jmp paranoid_userspace
+paranoid_schedule:
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	call schedule
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	jmp paranoid_userspace
+	CFI_ENDPROC
+END(paranoid_exit)
+
+/*
+ * Exception entry point. This expects an error code/orig_rax on the stack.
+ * returns in "no swapgs flag" in %ebx.
+ */
+ENTRY(error_entry)
+	XCPT_FRAME
+	CFI_ADJUST_CFA_OFFSET 15*8
+	/* oldrax contains error code */
+	cld
+	movq_cfi rdi, RDI+8
+	movq_cfi rsi, RSI+8
+	movq_cfi rdx, RDX+8
+	movq_cfi rcx, RCX+8
+	movq_cfi rax, RAX+8
+	movq_cfi  r8,  R8+8
+	movq_cfi  r9,  R9+8
+	movq_cfi r10, R10+8
+	movq_cfi r11, R11+8
+	movq_cfi rbx, RBX+8
+	movq_cfi rbp, RBP+8
+	movq_cfi r12, R12+8
+	movq_cfi r13, R13+8
+	movq_cfi r14, R14+8
+	movq_cfi r15, R15+8
+	xorl %ebx,%ebx
+	testl $3,CS+8(%rsp)
+	je error_kernelspace
+error_swapgs:
+	SWAPGS
+error_sti:
+	TRACE_IRQS_OFF
+	ret
+	CFI_ENDPROC
+
+/*
+ * There are two places in the kernel that can potentially fault with
+ * usergs. Handle them here. The exception handlers after iret run with
+ * kernel gs again, so don't set the user space flag. B stepping K8s
+ * sometimes report an truncated RIP for IRET exceptions returning to
+ * compat mode. Check for these here too.
+ */
+error_kernelspace:
+	incl %ebx
+	leaq irq_return(%rip),%rcx
+	cmpq %rcx,RIP+8(%rsp)
+	je error_swapgs
+	movl %ecx,%ecx	/* zero extend */
+	cmpq %rcx,RIP+8(%rsp)
+	je error_swapgs
+	cmpq $gs_change,RIP+8(%rsp)
+	je error_swapgs
+	jmp error_sti
+END(error_entry)
+
+
+/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */
+ENTRY(error_exit)
+	DEFAULT_FRAME
+	movl %ebx,%eax
+	RESTORE_REST
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	GET_THREAD_INFO(%rcx)
+	testl %eax,%eax
+	jne retint_kernel
+	LOCKDEP_SYS_EXIT_IRQ
+	movl TI_flags(%rcx),%edx
+	movl $_TIF_WORK_MASK,%edi
+	andl %edi,%edx
+	jnz retint_careful
+	jmp retint_swapgs
+	CFI_ENDPROC
+END(error_exit)
+
+
+	/* runs on exception stack */
+ENTRY(nmi)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq_cfi $-1
+	subq $15*8, %rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call save_paranoid
+	DEFAULT_FRAME 0
+	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
+	movq %rsp,%rdi
+	movq $-1,%rsi
+	call do_nmi
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* paranoidexit; without TRACE_IRQS_OFF */
+	/* ebx:	no swapgs flag */
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	testl %ebx,%ebx				/* swapgs needed? */
+	jnz nmi_restore
+	testl $3,CS(%rsp)
+	jnz nmi_userspace
+nmi_swapgs:
+	SWAPGS_UNSAFE_STACK
+nmi_restore:
+	RESTORE_ALL 8
+	jmp irq_return
+nmi_userspace:
+	GET_THREAD_INFO(%rcx)
+	movl TI_flags(%rcx),%ebx
+	andl $_TIF_WORK_MASK,%ebx
+	jz nmi_swapgs
+	movq %rsp,%rdi			/* &pt_regs */
+	call sync_regs
+	movq %rax,%rsp			/* switch stack for scheduling */
+	testl $_TIF_NEED_RESCHED,%ebx
+	jnz nmi_schedule
+	movl %ebx,%edx			/* arg3: thread flags */
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	xorl %esi,%esi 			/* arg2: oldset */
+	movq %rsp,%rdi 			/* arg1: &pt_regs */
+	call do_notify_resume
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	jmp nmi_userspace
+nmi_schedule:
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	call schedule
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	jmp nmi_userspace
+	CFI_ENDPROC
+#else
+	jmp paranoid_exit
+	CFI_ENDPROC
+#endif
+END(nmi)
+
+ENTRY(ignore_sysret)
+	CFI_STARTPROC
+	mov $-ENOSYS,%eax
+	sysret
+	CFI_ENDPROC
+END(ignore_sysret)
+
+/*
+ * End of kprobes section
+ */
+	.popsection
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 60eb84e..1d3d0e7 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -18,7 +18,6 @@
 #include <asm/idle.h>
 #include <asm/smp.h>
 
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
 /*
  * Probabilistic stack overflow check:
  *
@@ -28,19 +27,18 @@
  */
 static inline void stack_overflow_check(struct pt_regs *regs)
 {
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
 	u64 curbase = (u64)task_stack_page(current);
-	static unsigned long warned = -60*HZ;
 
-	if (regs->sp >= curbase && regs->sp <= curbase + THREAD_SIZE &&
-	    regs->sp <  curbase + sizeof(struct thread_info) + 128 &&
-	    time_after(jiffies, warned + 60*HZ)) {
-		printk("do_IRQ: %s near stack overflow (cur:%Lx,sp:%lx)\n",
-		       current->comm, curbase, regs->sp);
-		show_stack(NULL,NULL);
-		warned = jiffies;
-	}
-}
+	WARN_ONCE(regs->sp >= curbase &&
+		  regs->sp <= curbase + THREAD_SIZE &&
+		  regs->sp <  curbase + sizeof(struct thread_info) +
+					sizeof(struct pt_regs) + 128,
+
+		  "do_IRQ: %s near stack overflow (cur:%Lx,sp:%lx)\n",
+			current->comm, curbase, regs->sp);
 #endif
+}
 
 /*
  * do_IRQ handles all normal device IRQ's (the special
@@ -60,9 +58,7 @@
 	irq_enter();
 	irq = __get_cpu_var(vector_irq)[vector];
 
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
 	stack_overflow_check(regs);
-#endif
 
 	desc = irq_to_desc(irq);
 	if (likely(desc))
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 845aa98..607db63 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -129,7 +129,7 @@
 	for (i =  FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* SYSCALL_VECTOR was reserved in trap_init. */
 		if (i != SYSCALL_VECTOR)
-			set_intr_gate(i, interrupt[i]);
+			set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
 	}
 
 
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index ff02353..8670b3c 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -24,41 +24,6 @@
 #include <asm/i8259.h>
 
 /*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define IRQ_NAME2(nr) nr##_interrupt(void)
-#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
-
-/*
- *	SMP has a few special interrupts for IPI messages
- */
-
-#define BUILD_IRQ(nr)				\
-	asmlinkage void IRQ_NAME(nr);		\
-	asm("\n.text\n.p2align\n"		\
-	    "IRQ" #nr "_interrupt:\n\t"		\
-	    "push $~(" #nr ") ; "		\
-	    "jmp common_interrupt\n"		\
-	    ".previous");
-
-#define BI(x,y) \
-	BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
  * (these are usually mapped to vectors 0x30-0x3f)
  */
@@ -73,37 +38,6 @@
  *
  * (these are usually mapped into the 0x30-0xff vector range)
  */
-				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
-	IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
-					  IRQLIST_16(0x2), IRQLIST_16(0x3),
-	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
-	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-
-
 
 /*
  * IRQ2 is cascade interrupt to second interrupt controller
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal.c
similarity index 74%
rename from arch/x86/kernel/signal_32.c
rename to arch/x86/kernel/signal.c
index d6dd057..b1cc6da 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal.c
@@ -1,32 +1,37 @@
 /*
  *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
  *
  *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
  *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
+ *  2000-2002   x86-64 support by Andi Kleen
  */
-#include <linux/list.h>
 
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/suspend.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/errno.h>
 #include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/smp.h>
 #include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/tracehook.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/uaccess.h>
 
 #include <asm/processor.h>
 #include <asm/ucontext.h>
-#include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
+
+#ifdef CONFIG_X86_64
+#include <asm/proto.h>
+#include <asm/ia32_unistd.h>
+#include <asm/mce.h>
+#endif /* CONFIG_X86_64 */
+
 #include <asm/syscall.h>
 #include <asm/syscalls.h>
 
@@ -45,74 +50,6 @@
 # define FIX_EFLAGS	__FIX_EFLAGS
 #endif
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
-{
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int sys_sigaltstack(unsigned long bx)
-{
-	/*
-	 * This is needed to make gcc realize it doesn't own the
-	 * "struct pt_regs"
-	 */
-	struct pt_regs *regs = (struct pt_regs *)&bx;
-	const stack_t __user *uss = (const stack_t __user *)bx;
-	stack_t __user *uoss = (stack_t __user *)regs->cx;
-
-	return do_sigaltstack(uss, uoss, regs->sp);
-}
-
 #define COPY(x)			{		\
 	err |= __get_user(regs->x, &sc->x);	\
 }
@@ -123,7 +60,7 @@
 		regs->seg = tmp;			\
 }
 
-#define COPY_SEG_STRICT(seg)	{			\
+#define COPY_SEG_CPL3(seg)	{			\
 		unsigned short tmp;			\
 		err |= __get_user(tmp, &sc->seg);	\
 		regs->seg = tmp | 3;			\
@@ -135,9 +72,6 @@
 		loadsegment(seg, tmp);			\
 }
 
-/*
- * Do a signal return; undo the signal stack.
- */
 static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 		   unsigned long *pax)
@@ -149,14 +83,36 @@
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
+#ifdef CONFIG_X86_32
 	GET_SEG(gs);
 	COPY_SEG(fs);
 	COPY_SEG(es);
 	COPY_SEG(ds);
+#endif /* CONFIG_X86_32 */
+
 	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
 	COPY(dx); COPY(cx); COPY(ip);
-	COPY_SEG_STRICT(cs);
-	COPY_SEG_STRICT(ss);
+
+#ifdef CONFIG_X86_64
+	COPY(r8);
+	COPY(r9);
+	COPY(r10);
+	COPY(r11);
+	COPY(r12);
+	COPY(r13);
+	COPY(r14);
+	COPY(r15);
+#endif /* CONFIG_X86_64 */
+
+#ifdef CONFIG_X86_32
+	COPY_SEG_CPL3(cs);
+	COPY_SEG_CPL3(ss);
+#else /* !CONFIG_X86_32 */
+	/* Kernel saves and restores only the CS segment register on signals,
+	 * which is the bare minimum needed to allow mixed 32/64-bit code.
+	 * App's signal handler can save/restore other segments if needed. */
+	COPY_SEG_CPL3(cs);
+#endif /* CONFIG_X86_32 */
 
 	err |= __get_user(tmpflags, &sc->flags);
 	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
@@ -169,102 +125,24 @@
 	return err;
 }
 
-asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
-{
-	struct sigframe __user *frame;
-	struct pt_regs *regs;
-	unsigned long ax;
-	sigset_t set;
-
-	regs = (struct pt_regs *) &__unused;
-	frame = (struct sigframe __user *)(regs->sp - 8);
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &ax))
-		goto badframe;
-	return ax;
-
-badframe:
-	if (show_unhandled_signals && printk_ratelimit()) {
-		printk("%s%s[%d] bad frame in sigreturn frame:"
-			"%p ip:%lx sp:%lx oeax:%lx",
-		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
-		    current->comm, task_pid_nr(current), frame, regs->ip,
-		    regs->sp, regs->orig_ax);
-		print_vma_addr(" in ", regs->ip);
-		printk(KERN_CONT "\n");
-	}
-
-	force_sig(SIGSEGV, current);
-
-	return 0;
-}
-
-static long do_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	unsigned long ax;
-	sigset_t set;
-
-	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
-		goto badframe;
-
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
-		goto badframe;
-
-	return ax;
-
-badframe:
-	signal_fault(regs, frame, "rt_sigreturn");
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
-	struct pt_regs *regs = (struct pt_regs *)&__unused;
-
-	return do_rt_sigreturn(regs);
-}
-
-/*
- * Set up a signal frame.
- */
 static int
 setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 		 struct pt_regs *regs, unsigned long mask)
 {
-	int tmp, err = 0;
+	int err = 0;
 
+#ifdef CONFIG_X86_32
+	{
+		unsigned int tmp;
+
+		savesegment(gs, tmp);
+		err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
+	}
 	err |= __put_user(regs->fs, (unsigned int __user *)&sc->fs);
-	savesegment(gs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-
 	err |= __put_user(regs->es, (unsigned int __user *)&sc->es);
 	err |= __put_user(regs->ds, (unsigned int __user *)&sc->ds);
+#endif /* CONFIG_X86_32 */
+
 	err |= __put_user(regs->di, &sc->di);
 	err |= __put_user(regs->si, &sc->si);
 	err |= __put_user(regs->bp, &sc->bp);
@@ -273,19 +151,33 @@
 	err |= __put_user(regs->dx, &sc->dx);
 	err |= __put_user(regs->cx, &sc->cx);
 	err |= __put_user(regs->ax, &sc->ax);
+#ifdef CONFIG_X86_64
+	err |= __put_user(regs->r8, &sc->r8);
+	err |= __put_user(regs->r9, &sc->r9);
+	err |= __put_user(regs->r10, &sc->r10);
+	err |= __put_user(regs->r11, &sc->r11);
+	err |= __put_user(regs->r12, &sc->r12);
+	err |= __put_user(regs->r13, &sc->r13);
+	err |= __put_user(regs->r14, &sc->r14);
+	err |= __put_user(regs->r15, &sc->r15);
+#endif /* CONFIG_X86_64 */
+
 	err |= __put_user(current->thread.trap_no, &sc->trapno);
 	err |= __put_user(current->thread.error_code, &sc->err);
 	err |= __put_user(regs->ip, &sc->ip);
+#ifdef CONFIG_X86_32
 	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
 	err |= __put_user(regs->flags, &sc->flags);
 	err |= __put_user(regs->sp, &sc->sp_at_signal);
 	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
+#else /* !CONFIG_X86_32 */
+	err |= __put_user(regs->flags, &sc->flags);
+	err |= __put_user(regs->cs, &sc->cs);
+	err |= __put_user(0, &sc->gs);
+	err |= __put_user(0, &sc->fs);
+#endif /* CONFIG_X86_32 */
 
-	tmp = save_i387_xstate(fpstate);
-	if (tmp < 0)
-		err = 1;
-	else
-		err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+	err |= __put_user(fpstate, &sc->fpstate);
 
 	/* non-iBCS2 extensions.. */
 	err |= __put_user(mask, &sc->oldmask);
@@ -295,6 +187,32 @@
 }
 
 /*
+ * Set up a signal frame.
+ */
+#ifdef CONFIG_X86_32
+static const struct {
+	u16 poplmovl;
+	u32 val;
+	u16 int80;
+} __attribute__((packed)) retcode = {
+	0xb858,		/* popl %eax; movl $..., %eax */
+	__NR_sigreturn,
+	0x80cd,		/* int $0x80 */
+};
+
+static const struct {
+	u8  movl;
+	u32 val;
+	u16 int80;
+	u8  pad;
+} __attribute__((packed)) rt_retcode = {
+	0xb8,		/* movl $..., %eax */
+	__NR_rt_sigreturn,
+	0x80cd,		/* int $0x80 */
+	0
+};
+
+/*
  * Determine which stack to use..
  */
 static inline void __user *
@@ -328,6 +246,8 @@
 	if (used_math()) {
 		sp = sp - sig_xstate_size;
 		*fpstate = (struct _fpstate *) sp;
+		if (save_i387_xstate(*fpstate) < 0)
+			return (void __user *)-1L;
 	}
 
 	sp -= frame_size;
@@ -383,9 +303,7 @@
 	 * reasons and because gdb uses it as a signature to notice
 	 * signal handler stack frames.
 	 */
-	err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
-	err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
-	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+	err |= __put_user(*((u64 *)&retcode), (u64 *)frame->retcode);
 
 	if (err)
 		return -EFAULT;
@@ -454,9 +372,7 @@
 	 * reasons and because gdb uses it as a signature to notice
 	 * signal handler stack frames.
 	 */
-	err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
-	err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
-	err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+	err |= __put_user(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
 
 	if (err)
 		return -EFAULT;
@@ -475,23 +391,298 @@
 
 	return 0;
 }
+#else /* !CONFIG_X86_32 */
+/*
+ * Determine which stack to use..
+ */
+static void __user *
+get_stack(struct k_sigaction *ka, unsigned long sp, unsigned long size)
+{
+	/* Default to using normal stack - redzone*/
+	sp -= 128;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	return (void __user *)round_down(sp - size, 64);
+}
+
+static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			    sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	void __user *fp = NULL;
+	int err = 0;
+	struct task_struct *me = current;
+
+	if (used_math()) {
+		fp = get_stack(ka, regs->sp, sig_xstate_size);
+		frame = (void __user *)round_down(
+			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
+
+		if (save_i387_xstate(fp) < 0)
+			return -EFAULT;
+	} else
+		frame = get_stack(ka, regs->sp, sizeof(struct rt_sigframe)) - 8;
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		if (copy_siginfo_to_user(&frame->info, info))
+			return -EFAULT;
+	}
+
+	/* Create the ucontext.  */
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->sp),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	/* x86-64 should always use SA_RESTORER. */
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
+	} else {
+		/* could use a vstub here */
+		return -EFAULT;
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->di = sig;
+	/* In case the signal handler was declared without prototypes */
+	regs->ax = 0;
+
+	/* This also works for non SA_SIGINFO handlers because they expect the
+	   next argument after the signal number on the stack. */
+	regs->si = (unsigned long)&frame->info;
+	regs->dx = (unsigned long)&frame->uc;
+	regs->ip = (unsigned long) ka->sa.sa_handler;
+
+	regs->sp = (unsigned long)frame;
+
+	/* Set up the CS register to run signal handlers in 64-bit mode,
+	   even if the handler happens to be interrupting 32-bit code. */
+	regs->cs = __USER_CS;
+
+	return 0;
+}
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_X86_32
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	current->saved_sigmask = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+
+	return -ERESTARTNOHAND;
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+	      struct old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	if (act) {
+		old_sigset_t mask;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+			return -EFAULT;
+
+		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		__get_user(mask, &act->sa_mask);
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+			return -EFAULT;
+
+		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+	}
+
+	return ret;
+}
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_X86_32
+asmlinkage int sys_sigaltstack(unsigned long bx)
+{
+	/*
+	 * This is needed to make gcc realize it doesn't own the
+	 * "struct pt_regs"
+	 */
+	struct pt_regs *regs = (struct pt_regs *)&bx;
+	const stack_t __user *uss = (const stack_t __user *)bx;
+	stack_t __user *uoss = (stack_t __user *)regs->cx;
+
+	return do_sigaltstack(uss, uoss, regs->sp);
+}
+#else /* !CONFIG_X86_32 */
+asmlinkage long
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+		struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->sp);
+}
+#endif /* CONFIG_X86_32 */
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+#ifdef CONFIG_X86_32
+asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
+{
+	struct sigframe __user *frame;
+	struct pt_regs *regs;
+	unsigned long ax;
+	sigset_t set;
+
+	regs = (struct pt_regs *) &__unused;
+	frame = (struct sigframe __user *)(regs->sp - 8);
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
+		&& __copy_from_user(&set.sig[1], &frame->extramask,
+				    sizeof(frame->extramask))))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->sc, &ax))
+		goto badframe;
+	return ax;
+
+badframe:
+	if (show_unhandled_signals && printk_ratelimit()) {
+		printk("%s%s[%d] bad frame in sigreturn frame:"
+			"%p ip:%lx sp:%lx oeax:%lx",
+		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
+		    current->comm, task_pid_nr(current), frame, regs->ip,
+		    regs->sp, regs->orig_ax);
+		print_vma_addr(" in ", regs->ip);
+		printk(KERN_CONT "\n");
+	}
+
+	force_sig(SIGSEGV, current);
+
+	return 0;
+}
+#endif /* CONFIG_X86_32 */
+
+static long do_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	unsigned long ax;
+	sigset_t set;
+
+	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
+
+	return ax;
+
+badframe:
+	signal_fault(regs, frame, "rt_sigreturn");
+	return 0;
+}
+
+#ifdef CONFIG_X86_32
+asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
+{
+	return do_rt_sigreturn(&regs);
+}
+#else /* !CONFIG_X86_32 */
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+	return do_rt_sigreturn(regs);
+}
+#endif /* CONFIG_X86_32 */
 
 /*
  * OK, we're invoking a handler:
  */
 static int signr_convert(int sig)
 {
+#ifdef CONFIG_X86_32
 	struct thread_info *info = current_thread_info();
 
 	if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32)
 		return info->exec_domain->signal_invmap[sig];
+#endif /* CONFIG_X86_32 */
 	return sig;
 }
 
+#ifdef CONFIG_X86_32
+
 #define is_ia32	1
 #define ia32_setup_frame	__setup_frame
 #define ia32_setup_rt_frame	__setup_rt_frame
 
+#else /* !CONFIG_X86_32 */
+
+#ifdef CONFIG_IA32_EMULATION
+#define is_ia32	test_thread_flag(TIF_IA32)
+#else /* !CONFIG_IA32_EMULATION */
+#define is_ia32	0
+#endif /* CONFIG_IA32_EMULATION */
+
+#endif /* CONFIG_X86_32 */
+
 static int
 setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	       sigset_t *set, struct pt_regs *regs)
@@ -592,7 +783,13 @@
 	return 0;
 }
 
+#ifdef CONFIG_X86_32
 #define NR_restart_syscall	__NR_restart_syscall
+#else /* !CONFIG_X86_32 */
+#define NR_restart_syscall	\
+	test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
+#endif /* CONFIG_X86_32 */
+
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
deleted file mode 100644
index a5c9627..0000000
--- a/arch/x86/kernel/signal_64.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
- *
- *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
- *  2000-2002   x86-64 support by Andi Kleen
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/tracehook.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/compiler.h>
-#include <linux/uaccess.h>
-
-#include <asm/processor.h>
-#include <asm/ucontext.h>
-#include <asm/i387.h>
-#include <asm/proto.h>
-#include <asm/ia32_unistd.h>
-#include <asm/mce.h>
-#include <asm/syscall.h>
-#include <asm/syscalls.h>
-#include "sigframe.h"
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-#define __FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
-			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
-			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
-			 X86_EFLAGS_CF)
-
-#ifdef CONFIG_X86_32
-# define FIX_EFLAGS	(__FIX_EFLAGS | X86_EFLAGS_RF)
-#else
-# define FIX_EFLAGS	__FIX_EFLAGS
-#endif
-
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->sp);
-}
-
-#define COPY(x)			{		\
-	err |= __get_user(regs->x, &sc->x);	\
-}
-
-#define COPY_SEG_STRICT(seg)	{			\
-		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
-		regs->seg = tmp | 3;			\
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
-		   unsigned long *pax)
-{
-	void __user *buf;
-	unsigned int tmpflags;
-	unsigned int err = 0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
-	COPY(dx); COPY(cx); COPY(ip);
-	COPY(r8);
-	COPY(r9);
-	COPY(r10);
-	COPY(r11);
-	COPY(r12);
-	COPY(r13);
-	COPY(r14);
-	COPY(r15);
-
-	/* Kernel saves and restores only the CS segment register on signals,
-	 * which is the bare minimum needed to allow mixed 32/64-bit code.
-	 * App's signal handler can save/restore other segments if needed. */
-	COPY_SEG_STRICT(cs);
-
-	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-	regs->orig_ax = -1;		/* disable syscall checks */
-
-	err |= __get_user(buf, &sc->fpstate);
-	err |= restore_i387_xstate(buf);
-
-	err |= __get_user(*pax, &sc->ax);
-	return err;
-}
-
-static long do_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	unsigned long ax;
-	sigset_t set;
-
-	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
-		goto badframe;
-
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
-		goto badframe;
-
-	return ax;
-
-badframe:
-	signal_fault(regs, frame, "rt_sigreturn");
-	return 0;
-}
-
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
-	return do_rt_sigreturn(regs);
-}
-
-/*
- * Set up a signal frame.
- */
-
-static inline int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-		unsigned long mask, struct task_struct *me)
-{
-	int err = 0;
-
-	err |= __put_user(regs->cs, &sc->cs);
-	err |= __put_user(0, &sc->gs);
-	err |= __put_user(0, &sc->fs);
-
-	err |= __put_user(regs->di, &sc->di);
-	err |= __put_user(regs->si, &sc->si);
-	err |= __put_user(regs->bp, &sc->bp);
-	err |= __put_user(regs->sp, &sc->sp);
-	err |= __put_user(regs->bx, &sc->bx);
-	err |= __put_user(regs->dx, &sc->dx);
-	err |= __put_user(regs->cx, &sc->cx);
-	err |= __put_user(regs->ax, &sc->ax);
-	err |= __put_user(regs->r8, &sc->r8);
-	err |= __put_user(regs->r9, &sc->r9);
-	err |= __put_user(regs->r10, &sc->r10);
-	err |= __put_user(regs->r11, &sc->r11);
-	err |= __put_user(regs->r12, &sc->r12);
-	err |= __put_user(regs->r13, &sc->r13);
-	err |= __put_user(regs->r14, &sc->r14);
-	err |= __put_user(regs->r15, &sc->r15);
-	err |= __put_user(me->thread.trap_no, &sc->trapno);
-	err |= __put_user(me->thread.error_code, &sc->err);
-	err |= __put_user(regs->ip, &sc->ip);
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(me->thread.cr2, &sc->cr2);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-
-static void __user *
-get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
-{
-	unsigned long sp;
-
-	/* Default to using normal stack - redzone*/
-	sp = regs->sp - 128;
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (sas_ss_flags(sp) == 0)
-			sp = current->sas_ss_sp + current->sas_ss_size;
-	}
-
-	return (void __user *)round_down(sp - size, 64);
-}
-
-static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	void __user *fp = NULL;
-	int err = 0;
-	struct task_struct *me = current;
-
-	if (used_math()) {
-		fp = get_stack(ka, regs, sig_xstate_size);
-		frame = (void __user *)round_down(
-			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
-
-		if (save_i387_xstate(fp) < 0)
-			return -EFAULT;
-	} else
-		frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		return -EFAULT;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-		if (copy_siginfo_to_user(&frame->info, info))
-			return -EFAULT;
-	}
-
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
-	err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
-	if (sizeof(*set) == 16) {
-		__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
-		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
-	} else
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	/* x86-64 should always use SA_RESTORER. */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
-	} else {
-		/* could use a vstub here */
-		return -EFAULT;
-	}
-
-	if (err)
-		return -EFAULT;
-
-	/* Set up registers for signal handler */
-	regs->di = sig;
-	/* In case the signal handler was declared without prototypes */
-	regs->ax = 0;
-
-	/* This also works for non SA_SIGINFO handlers because they expect the
-	   next argument after the signal number on the stack. */
-	regs->si = (unsigned long)&frame->info;
-	regs->dx = (unsigned long)&frame->uc;
-	regs->ip = (unsigned long) ka->sa.sa_handler;
-
-	regs->sp = (unsigned long)frame;
-
-	/* Set up the CS register to run signal handlers in 64-bit mode,
-	   even if the handler happens to be interrupting 32-bit code. */
-	regs->cs = __USER_CS;
-
-	return 0;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static int signr_convert(int sig)
-{
-	return sig;
-}
-
-#ifdef CONFIG_IA32_EMULATION
-#define is_ia32	test_thread_flag(TIF_IA32)
-#else
-#define is_ia32	0
-#endif
-
-static int
-setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-	       sigset_t *set, struct pt_regs *regs)
-{
-	int usig = signr_convert(sig);
-	int ret;
-
-	/* Set up the stack frame */
-	if (is_ia32) {
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
-		else
-			ret = ia32_setup_frame(usig, ka, set, regs);
-	} else
-		ret = __setup_rt_frame(sig, ka, info, set, regs);
-
-	if (ret) {
-		force_sigsegv(sig, current);
-		return -EFAULT;
-	}
-
-	return ret;
-}
-
-static int
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset, struct pt_regs *regs)
-{
-	int ret;
-
-	/* Are we from a system call? */
-	if (syscall_get_nr(current, regs) >= 0) {
-		/* If so, check system call restarting.. */
-		switch (syscall_get_error(current, regs)) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->ax = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->ax = -EINTR;
-				break;
-			}
-		/* fallthrough */
-		case -ERESTARTNOINTR:
-			regs->ax = regs->orig_ax;
-			regs->ip -= 2;
-			break;
-		}
-	}
-
-	/*
-	 * If TF is set due to a debugger (TIF_FORCED_TF), clear the TF
-	 * flag so that register information in the sigcontext is correct.
-	 */
-	if (unlikely(regs->flags & X86_EFLAGS_TF) &&
-	    likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
-		regs->flags &= ~X86_EFLAGS_TF;
-
-	ret = setup_rt_frame(sig, ka, info, oldset, regs);
-
-	if (ret)
-		return ret;
-
-#ifdef CONFIG_X86_64
-	/*
-	 * This has nothing to do with segment registers,
-	 * despite the name.  This magic affects uaccess.h
-	 * macros' behavior.  Reset it to the normal setting.
-	 */
-	set_fs(USER_DS);
-#endif
-
-	/*
-	 * Clear the direction flag as per the ABI for function entry.
-	 */
-	regs->flags &= ~X86_EFLAGS_DF;
-
-	/*
-	 * Clear TF when entering the signal handler, but
-	 * notify any tracer that was single-stepping it.
-	 * The tracer may want to single-step inside the
-	 * handler too.
-	 */
-	regs->flags &= ~X86_EFLAGS_TF;
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	tracehook_signal_handler(sig, info, ka, regs,
-				 test_thread_flag(TIF_SINGLESTEP));
-
-	return 0;
-}
-
-#define NR_restart_syscall	\
-	test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void do_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 * X86_32: vm86 regs switched out by assembly code before reaching
-	 * here, so testing against kernel CS suffices.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/*
-		 * Re-enable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
-		/* Whee! Actually deliver the signal.  */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/*
-			 * A signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TS_RESTORE_SIGMASK flag.
-			 */
-			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-		}
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if (syscall_get_nr(current, regs) >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (syscall_get_error(current, regs)) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			regs->ax = regs->orig_ax;
-			regs->ip -= 2;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->ax = NR_restart_syscall;
-			regs->ip -= 2;
-			break;
-		}
-	}
-
-	/*
-	 * If there's no signal to deliver, we just put the saved sigmask
-	 * back.
-	 */
-	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
-
-/*
- * notification of userspace execution resumption
- * - triggered by the TIF_WORK_MASK flags
- */
-void
-do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
-{
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
-	/* notify userspace of pending MCEs */
-	if (thread_info_flags & _TIF_MCE_NOTIFY)
-		mce_notify_user();
-#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
-
-	/* deal with pending signal delivery */
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-
-#ifdef CONFIG_X86_32
-	clear_thread_flag(TIF_IRET);
-#endif /* CONFIG_X86_32 */
-}
-
-void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
-{
-	struct task_struct *me = current;
-
-	if (show_unhandled_signals && printk_ratelimit()) {
-		printk(KERN_INFO
-		       "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
-		       me->comm, me->pid, where, frame,
-		       regs->ip, regs->sp, regs->orig_ax);
-		print_vma_addr(" in ", regs->ip);
-		printk(KERN_CONT "\n");
-	}
-
-	force_sig(SIGSEGV, me);
-}
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index cb19d65..418a095 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -80,6 +80,8 @@
 			break;
 	no_ctr_free = (i == 4);
 	if (no_ctr_free) {
+		WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
+		     "cpu_khz value may be incorrect.\n");
 		i = 3;
 		rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
 		wrmsrl(MSR_K7_EVNTSEL3, 0);
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 0b8b6690..ebf2f12 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -128,7 +128,16 @@
 			gettimeofday(tv,NULL);
 			return;
 		}
+
+		/*
+		 * Surround the RDTSC by barriers, to make sure it's not
+		 * speculated to outside the seqlock critical section and
+		 * does not cause time warps:
+		 */
+		rdtsc_barrier();
 		now = vread();
+		rdtsc_barrier();
+
 		base = __vsyscall_gtod_data.clock.cycle_last;
 		mask = __vsyscall_gtod_data.clock.mask;
 		mult = __vsyscall_gtod_data.clock.mult;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a5d8e1a..50a7792 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -590,7 +590,8 @@
 		 * a straightforward 1 to 1 mapping, so force that here. */
 		__get_cpu_var(vector_irq)[vector] = i;
 		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector, interrupt[vector]);
+			set_intr_gate(vector,
+				      interrupt[vector-FIRST_EXTERNAL_VECTOR]);
 			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
 						      handle_level_irq,
 						      "level");
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index c483f42..3ffed25 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -102,6 +102,8 @@
 		set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
 		pud = pud_offset(pgd, 0);
 		BUG_ON(pmd_table != pmd_offset(pud, 0));
+
+		return pmd_table;
 	}
 #endif
 	pud = pud_offset(pgd, 0);
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 9fd1f85..fee9e59 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -64,14 +64,6 @@
 	name:
 #endif
 
-#define KPROBE_ENTRY(name) \
-  .pushsection .kprobes.text, "ax"; \
-  ENTRY(name)
-
-#define KPROBE_END(name) \
-  END(name);		 \
-  .popsection
-
 #ifndef END
 #define END(name) \
   .size name, .-name