[PATCH] powerpc: Fix clock spreading setting on some powermacs
The code that sets the clock spreading feature of the Intrepid ASIC
must not be run on some machine models or those won't boot. This
fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 0d7fa00..f6e22da 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -1650,11 +1650,19 @@
*/
if (macio->type == macio_intrepid) {
- if (enable)
- UN_OUT(UNI_N_CLOCK_SPREADING, 2);
- else
- UN_OUT(UNI_N_CLOCK_SPREADING, 0);
- mdelay(40);
+ struct device_node *clock =
+ of_find_node_by_path("/uni-n@f8000000/hw-clock");
+ if (clock && get_property(clock, "platform-do-clockspreading",
+ NULL)) {
+ printk(KERN_INFO "%sabling clock spreading on Intrepid"
+ " ASIC\n", enable ? "En" : "Dis");
+ if (enable)
+ UN_OUT(UNI_N_CLOCK_SPREADING, 2);
+ else
+ UN_OUT(UNI_N_CLOCK_SPREADING, 0);
+ mdelay(40);
+ }
+ of_node_put(clock);
}
while (machine_is_compatible("PowerBook5,2") ||
@@ -1724,6 +1732,9 @@
pmac_low_i2c_close(ui2c);
break;
}
+ printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n",
+ enable ? "En" : "Dis");
+
pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
DBG("write result: %d,", rc);
diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c
index 1e69b05..6b7b3a1 100644
--- a/arch/ppc/platforms/pmac_feature.c
+++ b/arch/ppc/platforms/pmac_feature.c
@@ -1606,11 +1606,19 @@
*/
if (macio->type == macio_intrepid) {
- if (enable)
- UN_OUT(UNI_N_CLOCK_SPREADING, 2);
- else
- UN_OUT(UNI_N_CLOCK_SPREADING, 0);
- mdelay(40);
+ struct device_node *clock =
+ of_find_node_by_path("/uni-n@f8000000/hw-clock");
+ if (clock && get_property(clock, "platform-do-clockspreading",
+ NULL)) {
+ printk(KERN_INFO "%sabling clock spreading on Intrepid"
+ " ASIC\n", enable ? "En" : "Dis");
+ if (enable)
+ UN_OUT(UNI_N_CLOCK_SPREADING, 2);
+ else
+ UN_OUT(UNI_N_CLOCK_SPREADING, 0);
+ mdelay(40);
+ }
+ of_node_put(clock);
}
while (machine_is_compatible("PowerBook5,2") ||
@@ -1680,6 +1688,8 @@
pmac_low_i2c_close(ui2c);
break;
}
+ printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n",
+ enable ? "En" : "Dis");
pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
DBG("write result: %d,", rc);