IPoIB: add LRO support
Add "ipoib_use_lro" module parameter to enable LRO and an
"ipoib_lro_max_aggr" module parameter to set the max number of packets
to be aggregated. Make LRO controllable and LRO statistics accessible
through ethtool.
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index bfe1dbf..fead88f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -60,6 +60,15 @@
module_param_named(recv_queue_size, ipoib_recvq_size, int, 0444);
MODULE_PARM_DESC(recv_queue_size, "Number of descriptors in receive queue");
+static int lro;
+module_param(lro, bool, 0444);
+MODULE_PARM_DESC(lro, "Enable LRO (Large Receive Offload)");
+
+static int lro_max_aggr = IPOIB_LRO_MAX_AGGR;
+module_param(lro_max_aggr, int, 0644);
+MODULE_PARM_DESC(lro_max_aggr, "LRO: Max packets to be aggregated "
+ "(default = 64)");
+
#ifdef CONFIG_INFINIBAND_IPOIB_DEBUG
int ipoib_debug_level;
@@ -936,6 +945,54 @@
.create = ipoib_hard_header,
};
+static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
+ void **tcph, u64 *hdr_flags, void *priv)
+{
+ unsigned int ip_len;
+ struct iphdr *iph;
+
+ if (unlikely(skb->protocol != htons(ETH_P_IP)))
+ return -1;
+
+ /*
+ * In the future we may add an else clause that verifies the
+ * checksum and allows devices which do not calculate checksum
+ * to use LRO.
+ */
+ if (unlikely(skb->ip_summed != CHECKSUM_UNNECESSARY))
+ return -1;
+
+ /* Check for non-TCP packet */
+ skb_reset_network_header(skb);
+ iph = ip_hdr(skb);
+ if (iph->protocol != IPPROTO_TCP)
+ return -1;
+
+ ip_len = ip_hdrlen(skb);
+ skb_set_transport_header(skb, ip_len);
+ *tcph = tcp_hdr(skb);
+
+ /* check if IP header and TCP header are complete */
+ if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
+ return -1;
+
+ *hdr_flags = LRO_IPV4 | LRO_TCP;
+ *iphdr = iph;
+
+ return 0;
+}
+
+static void ipoib_lro_setup(struct ipoib_dev_priv *priv)
+{
+ priv->lro.lro_mgr.max_aggr = lro_max_aggr;
+ priv->lro.lro_mgr.max_desc = IPOIB_MAX_LRO_DESCRIPTORS;
+ priv->lro.lro_mgr.lro_arr = priv->lro.lro_desc;
+ priv->lro.lro_mgr.get_skb_header = get_skb_hdr;
+ priv->lro.lro_mgr.features = LRO_F_NAPI;
+ priv->lro.lro_mgr.dev = priv->dev;
+ priv->lro.lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
+}
+
static void ipoib_setup(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -975,6 +1032,8 @@
priv->dev = dev;
+ ipoib_lro_setup(priv);
+
spin_lock_init(&priv->lock);
spin_lock_init(&priv->tx_lock);
@@ -1152,6 +1211,9 @@
priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
}
+ if (lro)
+ priv->dev->features |= NETIF_F_LRO;
+
/*
* Set the full membership bit, so that we join the right
* broadcast group, etc.