[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 43edb4e..72fbcc4 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -32,7 +32,7 @@
- Flash access (MTD/JFFS)
- I2C through GPIO on IXP42x
- GPIO for input/output/interrupts
- See include/asm-arm/arch-ixp4xx/platform.h for access functions.
+ See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
- Timers (watchdog, OS)
The following components of the chips are not supported by Linux and
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index c202ed3..f09ab1b 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -158,7 +158,7 @@
be re-checked for pending events. (see the Neponset IRQ handler for
details).
-7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h
+7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
Please note that this will not solve all problems - some of them are
hardware based. Mixing level-based and edge-based IRQs on the same
diff --git a/Documentation/arm/README b/Documentation/arm/README
index 9b9c822..d98783f 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -79,7 +79,7 @@
To this end, we now have arch/arm/mach-$(MACHINE) directories which are
designed to house the non-driver files for a particular machine (eg, PCI,
memory management, architecture definitions etc). For all future
- machines, there should be a corresponding include/asm-arm/arch-$(MACHINE)
+ machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
directory.
@@ -176,7 +176,7 @@
class typically based around one or more system on a chip devices, and
acts as a natural container around the actual implementations. These
classes are given directories - arch/arm/mach-<class> and
- include/asm-arm/arch-<class> - which contain the source files to
+ arch/arm/mach-<class> - which contain the source files to/include/mach
support the machine class. This directories also contain any machine
specific supporting code.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 8caea8c..b5d20c0 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -16,13 +16,13 @@
Headers
-------
- See include/asm-arm/arch-s3c2410/regs-gpio.h for the list
+ See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
of GPIO pins, and the configuration values for them. This
- is included by using #include <asm/arch/regs-gpio.h>
+ is included by using #include <mach/regs-gpio.h>
The GPIO management functions are defined in the hardware
- header include/asm-arm/arch-s3c2410/hardware.h which can be
- included by #include <asm/arch/hardware.h>
+ header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
+ included by #include <mach/hardware.h>
A useful amount of documentation can be found in the hardware
header on how the GPIO functions (and others) work.
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index d04e1e3..014a8ec 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -36,7 +36,7 @@
in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
Register, kernel and platform data definitions are held in the
- include/asm-arm/arch-s3c2410 directory.
+ arch/arm/mach-s3c2410 directory./include/mach
Machines
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index b93b68e..67671eb 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -49,7 +49,7 @@
Platform Data
-------------
- See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+ See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
descriptions of the platform device data. An implementation
can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f3853cc..bbe8dee 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@
-----------------------------------
Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
"platform device". The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
struct pxa2xx_spi_master {
enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h". The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver
will uses the configuration whenever the driver communicates with the slave
device.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 6d5f181..8bae2f0 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -210,7 +210,7 @@
So for example arch/.../mach-*/board-*.c files might have code like:
- #include <asm/arch/spi.h> /* for mysoc_spi_data */
+ #include <mach/spi.h> /* for mysoc_spi_data */
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
@@ -227,7 +227,7 @@
And SOC-specific utility code might look something like:
- #include <asm/arch/spi.h>
+ #include <mach/spi.h>
static struct platform_device spi2 = { ... };
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 359d224..703a44f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -97,9 +97,7 @@
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_CLPS7500) := clps7500
- incdir-$(CONFIG_ARCH_CLPS7500) := cl7500
machine-$(CONFIG_FOOTBRIDGE) := footbridge
- incdir-$(CONFIG_FOOTBRIDGE) := ebsa285
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SA1100) := sa1100
ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -120,7 +118,6 @@
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
- incdir-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
@@ -138,7 +135,6 @@
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
- incdir-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_MXC) := mxc
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX3) := mx3
@@ -158,11 +154,6 @@
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
-ifeq ($(incdir-y),)
-incdir-y := $(word 1,$(machine-y))
-endif
-INCDIR := arch-$(incdir-y)
-
# The first directory contains additional information for the boot setup code
ifneq ($(machine-y),)
MACHINE := arch/arm/mach-$(word 1,$(machine-y))/
@@ -213,20 +204,10 @@
# them changed. We use .arch to indicate when they were updated
# last, otherwise make uses the target directory mtime.
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
- @echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-arm
- $(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
- $(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
- @touch $@
-
archprepare: maketools
PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
# Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41dae..d42f89b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
#else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
.macro writeb, ch, rb
senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7145cc7..65ce8ff 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@
static void putstr(const char *ptr);
#include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 1f0f0ad..283051e 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 64c328d..ec8a547 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
#include <linux/dma-mapping.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index a0d1540..db83091 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,12 +26,12 @@
#include <linux/apm-emulation.h>
#include <linux/suspend.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
/*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index af37bfd..df0983a 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/ioc.h>
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 3e19985..7ecd3c0 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,7 +16,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/uengine.h>
#include <asm/io.h>
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 9f2c530..75154b1 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -6,7 +6,7 @@
#include <linux/spinlock.h>
#include <asm/system.h>
#include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
/*
* This is the maximum virtual address which can be DMA'd from.
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index dce20c2..c9f03ec 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -12,7 +12,7 @@
#ifndef __ASM_ARM_FLOPPY_H
#define __ASM_ARM_FLOPPY_H
#if 0
-#include <asm/arch/floppy.h>
+#include <mach/floppy.h>
#endif
#define fd_outb(val,port) \
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index fff4f80..166a7a3 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -2,6 +2,6 @@
#define _ARCH_ARM_GPIO_H
/* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index cf2578f..0d75527 100644
--- a/arch/arm/include/asm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -19,7 +19,7 @@
#define DC21285_PCI_MEM 0x80000000
#ifndef __ASSEMBLY__
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x)))
#else
#define DC21285_IO(x) (x)
diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index df31b15..87bff09 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -19,7 +19,7 @@
#define _ADMA_H
#include <linux/types.h>
#include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iop_adma.h>
/* Memory copy units */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 0ebc91c..b69d972 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -25,7 +25,7 @@
#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm-generic/gpio.h>
#define IOP3XX_N_GPIOS 8
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 6cf98d4..5da2595 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -12,7 +12,7 @@
#ifndef _ASM_ARCH_SA1111
#define _ASM_ARCH_SA1111
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
/*
* The SA1111 is always located at virtual 0xf4000000, and is always
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index ffe07c0..94a95d7 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -82,7 +82,7 @@
/*
* Now, pick up the machine-defined IO definitions
*/
-#include <asm/arch/io.h>
+#include <mach/io.h>
/*
* IO port access primitives
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 9cb0190..d678609 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARM_IRQ_H
#define __ASM_ARM_IRQ_H
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#ifndef irq_canonicalize
#define irq_canonicalize(i) (i)
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
index 7b81e0c4..e1ca48a 100644
--- a/arch/arm/include/asm/mc146818rtc.h
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -4,7 +4,7 @@
#ifndef _ASM_MC146818RTC_H
#define _ASM_MC146818RTC_H
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/io.h>
#ifndef RTC_PORT
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 9206922..1e070a2 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -24,7 +24,7 @@
#endif
#include <linux/compiler.h>
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
#include <asm/sizes.h>
#ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
index f2fbb50..ae63a4f 100644
--- a/arch/arm/include/asm/mmzone.h
+++ b/arch/arm/include/asm/mmzone.h
@@ -25,6 +25,6 @@
*/
#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
#endif
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
index 4bc50f9..4225372 100644
--- a/arch/arm/include/asm/mtd-xip.h
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -17,8 +17,8 @@
#ifndef __ARM_MTD_XIP_H__
#define __ARM_MTD_XIP_H__
-#include <asm/arch/hardware.h>
-#include <asm/arch/mtd-xip.h>
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
/* fill instruction prefetch */
#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0)
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 968b833..721c03d 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -4,7 +4,7 @@
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
-#include <asm/arch/hardware.h> /* for PCIBIOS_MIN_* */
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
#define pcibios_scan_all_fns(a, b) 0
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8ab060a..8e21ef1 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -20,7 +20,7 @@
#else
#include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
+#include <mach/vmalloc.h>
#include <asm/pgtable-hwdef.h>
/*
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index cc12a52..727b5c0 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -14,7 +14,7 @@
#include <linux/cpumask.h>
#include <linux/thread_info.h>
-#include <asm/arch/smp.h>
+#include <mach/smp.h>
#ifndef CONFIG_SMP
# error "<asm/smp.h> included in non-SMP build"
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index e50e292..3be8de3 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,7 +12,7 @@
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
-#include <asm/arch/timex.h>
+#include <mach/timex.h>
typedef unsigned long cycles_t;
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 4f767ad..6a3cd2a 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -1,7 +1,7 @@
#ifndef ASMARM_VGA_H
#define ASMARM_VGA_H
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x))
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a268867..0ec9bb4 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
/*
* We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d794..3b6a1c2 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
#include <asm/thread_notify.h>
#include <asm/io.h>
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566..9550ff0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
#endif /* CONFIG_CPU_V6 */
#else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
#endif /* CONFIG_DEBUG_ICEDCC */
/*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8192fe8..7a50575 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
#include <asm/dma.h>
#include <asm/ecard.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225..617e509 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
#include <asm/memory.h>
#include <asm/glue.h>
#include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
#include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e8..060d7e2 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
#include "entry-header.S"
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 89bfded..3fd8823 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@
static volatile int hlt_counter;
-#include <asm/arch/system.h>
+#include <mach/system.h>
void disable_hlt(void)
{
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index 79cf247..8678eb2 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define CPSR2SPSR(rt) \
mrs rt, cpsr; \
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4cc4411..9aaf7c7 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 0a34752..cd34503 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 08f030d..81a3ecc 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
#include "core.h"
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 2e0cec2..dfb26bc 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
#include <linux/timex.h>
#include <linux/signal.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 0000000..bc729c4
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ * AAEC-2000 registers definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0 0x00000000
+#define AAEC_CS1 0x10000000
+#define AAEC_CS2 0x20000000
+#define AAEC_CS3 0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE AAEC_CS0
+#define AAEC_FLASH_SIZE SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE __REG(0x80000500)
+#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
+#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
+#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
+#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE __REG(0x80000600)
+#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR __REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR __REG(0x8000060c) /* Control Register */
+#define UART1_SR __REG(0x80000610) /* Status Register */
+#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE __REG(0x80000700)
+#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR __REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR __REG(0x8000070c) /* Control Register */
+#define UART2_SR __REG(0x80000710) /* Status Register */
+#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE __REG(0x80000800)
+#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR __REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR __REG(0x8000080c) /* Control Register */
+#define UART3_SR __REG(0x80000810) /* Status Register */
+#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR 0x00
+#define UART_LCR 0x04
+#define UART_BRCR 0x08
+#define UART_CR 0x0c
+#define UART_SR 0x10
+#define UART_INT 0x14
+#define UART_INTM 0x18
+#define UART_INTRES 0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK (1 << 0) /* Send Break */
+#define UART_LCR_PEN (1 << 1) /* Parity Enable */
+#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN (1 << 0) /* UART Enable */
+#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE __REG(0x80000c00)
+#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
+#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
+#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
+#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE __REG(0x80000d00)
+#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
+#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
+#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
+#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE __REG(0x80000e00)
+#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
+#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
+#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
+#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE __REG(0x80000400)
+#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS 0x80000e00
+
+#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS 0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
new file mode 100644
index 0000000..f821295
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ * AAED-2000 specific bits definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE AAEC_CS3
+#define EXT_GPIO_VBASE 0xf8100000
+#define EXT_GPIO_LENGTH 0x00001000
+
+#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 0000000..0b6351d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/* arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical
+ movne \rx, #io_p2v(0x80000000) @ virtual
+ orr \rx, \rx, #0x00000800
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 7)
+ beq 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#if 0
+1001: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 5)
+ beq 1001b
+#endif
+ .endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 0000000..2da846c
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 0000000..c8fb344
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper for aaec-2000 based platforms
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov r4, #0xf8000000
+ add r4, r4, #0x00000500
+ mov \base, r4
+ ldr \irqstat, [\base, #0]
+ cmp \irqstat, #0
+ bne 1001f
+ ldr \irqnr, =NR_IRQS+1
+ b 1003f
+1001: mov \irqnr, #0
+1002: ands \tmp, \irqstat, #1
+ mov \irqstat, \irqstat, LSR #1
+ add \irqnr, \irqnr, #1
+ beq 1002b
+ sub \irqnr, \irqnr, #1
+1003:
+ .endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 0000000..965a6f6
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE 0x80000000
+#define VIO_APB_BASE 0xf8000000
+#define IO_APB_LENGTH 0x2000
+#define PIO_AHB_BASE 0x80002000
+#define VIO_AHB_BASE 0xf8002000
+#define IO_AHB_LENGTH 0x2000
+
+#define VIO_BASE VIO_APB_BASE
+#define PIO_BASE PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x) (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x) io_p2v(x)
+#define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 0000000..c87c24de
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 0000000..bf45c6d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ 3 /* Media Changed Interrupt */
+#define INT_SC 4 /* Sound Codec Interrupt */
+#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
+#define INT_TICK 11 /* 64Hz Tick Interrupt */
+#define INT_UART1 12 /* UART1 Interrupt */
+#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD 14 /* LCD Interrupt */
+#define INT_SSI 15 /* SSI End of Transfer Interrupt */
+#define INT_UART3 16 /* UART3 Interrupt */
+#define INT_SCI 17 /* SCI Interrupt */
+#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC 19 /* MMC Interrupt */
+#define INT_USB 20 /* USB Interrupt */
+#define INT_DMA 21 /* DMA Interrupt */
+#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI 27 /* BMI Interrupt */
+
+#define NR_IRQS (INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 0000000..56ae900
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ * node 0: 0xf000.0000 - 0xf3ff.ffff
+ * node 1: 0xf400.0000 - 0xf7ff.ffff
+ * node 2: 0xf800.0000 - 0xfbff.ffff
+ * node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS 26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 0000000..8f4115d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 0000000..6c8edf4
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ * AAEC-2000 Architecture timex specification
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 0000000..381ecad
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+ unsigned long serial_port;
+ do {
+ serial_port = _UART3_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART1_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART2_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ return;
+ } while (0);
+
+ /* wait for space in the UART's transmitter */
+ while ((UART(UART_SR) & UART_SR_TxFF))
+ barrier();
+
+ /* send the character out. */
+ UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 0000000..551f68f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f..638948c 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 25765f1..abb4aac 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
#include <video/atmel_lcdc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1d..28594fc 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index d2c5c84..9338825 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff..a72e798 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
#include <asm/mach/time.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
static unsigned long last_crtr;
static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a..accb69e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index f5fec0a..7774d17 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd..7b51a59 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b80860e..6b89172 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a..80bfab5 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 42108d0..c93992f 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7..122fd77 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
#include <asm/mach/time.h>
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c798..556bddf 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9c61576..6208863 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f446477..ad3ec85 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
#include "generic.h"
/*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 4469044..869b5e2 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
/*
* 3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index fc0f293..9b27d16 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -33,8 +33,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 17faf3c..cdddca5 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -37,8 +37,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index fd21d42..1961995 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
#include <video/atmel_lcdc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -42,10 +42,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 5156fd28..afa1ff0 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,8 +34,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index a55e9ca8..cb7c9a8 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -37,8 +37,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index dfdd4dd..8db8bd8 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,8 +34,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 78b5c8b..43e1aa7 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,9 +38,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 631af08..1f9d3cb 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#include "generic.h"
static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 58ae7a6..52865676 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,8 +34,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 665d309..bfeee8a2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -36,8 +36,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index dbe79df..60626e7 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,9 +38,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 16577a0..a87956c 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -33,8 +33,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 6054e98..fe9b991 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,10 +34,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ea39c6c..dbc912d 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -36,9 +36,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 5393b80..4c28413 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
#include <linux/input.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -39,9 +39,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index fe8a8ac..e4910cb 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -36,8 +36,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 6f3b377..cb20e70 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -37,8 +37,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 9d3c65e..1a9963b8 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
#include <video/atmel_lcdc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -44,9 +44,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 334b159..b1d1196 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
#include <video/atmel_lcdc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index f0975bb..d4eba5c 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -35,8 +35,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 5271200..c6dce49 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
#include <video/atmel_lcdc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -27,9 +27,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 4048e47..f9d0b65 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
#include <linux/input.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -39,9 +39,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index a2b9494..673e5c2 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,9 +38,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 0aa3dda..36b380a 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -42,9 +42,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index daebd72..f5c2847 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -25,9 +25,9 @@
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
#include "clock.h"
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4db221e..8392d5b 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
new file mode 100644
index 0000000..8e7ed5c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
new file mode 100644
index 0000000..0356679
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
+#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
+#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
+#define AT91_AIC_SRCTYPE_LOW (0 << 5)
+#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
+#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
+#define AT91_AIC_SRCTYPE_RISING (3 << 5)
+
+#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
+#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
+#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
+#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
+#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
+#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
+#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
+
+#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
+#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
+#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
+#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
+
+#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
new file mode 100644
index 0000000..6dcaa77
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#ifdef AT91_DBGU
+#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
+#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
+#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
+#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
+#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
+#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
+#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
+#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
+#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
+#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
+#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
+#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
+
+#endif /* AT91_DBGU */
+
+/*
+ * Some AT91 parts that don't have full DEBUG units still support the ID
+ * and extensions register.
+ */
+#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
+#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
+#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
+#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
+#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
+#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
+#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
+#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
+#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
+#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
+#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
+#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
+#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
+#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
+#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
+#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
+#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
+#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
+#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
+#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
+#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
new file mode 100644
index 0000000..550d503
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR 0x00 /* Control Register */
+#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
+#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
+#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
+#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
+#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
+
+#define AT91_MCI_MR 0x04 /* Mode Register */
+#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
+#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
+#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
+#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
+#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
+#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
+#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
+#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+
+#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
+#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
+#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
+#define AT91_MCI_DTOMUL_1 (0 << 4)
+#define AT91_MCI_DTOMUL_16 (1 << 4)
+#define AT91_MCI_DTOMUL_128 (2 << 4)
+#define AT91_MCI_DTOMUL_256 (3 << 4)
+#define AT91_MCI_DTOMUL_1K (4 << 4)
+#define AT91_MCI_DTOMUL_4K (5 << 4)
+#define AT91_MCI_DTOMUL_64K (6 << 4)
+#define AT91_MCI_DTOMUL_1M (7 << 4)
+
+#define AT91_MCI_SDCR 0x0c /* SD Card Register */
+#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
+#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR 0x10 /* Argument Register */
+
+#define AT91_MCI_CMDR 0x14 /* Command Register */
+#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
+#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
+#define AT91_MCI_RSPTYP_NONE (0 << 6)
+#define AT91_MCI_RSPTYP_48 (1 << 6)
+#define AT91_MCI_RSPTYP_136 (2 << 6)
+#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
+#define AT91_MCI_SPCMD_NONE (0 << 8)
+#define AT91_MCI_SPCMD_INIT (1 << 8)
+#define AT91_MCI_SPCMD_SYNC (2 << 8)
+#define AT91_MCI_SPCMD_ICMD (4 << 8)
+#define AT91_MCI_SPCMD_IRESP (5 << 8)
+#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
+#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
+#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
+#define AT91_MCI_TRCMD_NONE (0 << 16)
+#define AT91_MCI_TRCMD_START (1 << 16)
+#define AT91_MCI_TRCMD_STOP (2 << 16)
+#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
+#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
+#define AT91_MCI_TRTYP_BLOCK (0 << 19)
+#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
+#define AT91_MCI_TRTYP_STREAM (2 << 19)
+
+#define AT91_MCI_BLKR 0x18 /* Block Register */
+#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
+#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
+
+#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
+#define AT91_MCR_RDR 0x30 /* Receive Data Register */
+#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
+
+#define AT91_MCI_SR 0x40 /* Status Register */
+#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
+#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
+#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
+#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
+#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
+#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
+#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
+#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
+#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
+#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
+#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
+#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
+#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
+#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
+#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
+#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
+#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
+#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
+#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
+#define AT91_MCI_OVRE (1 << 30) /* Overrun */
+#define AT91_MCI_UNRE (1 << 31) /* Underrun */
+
+#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
+#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
+#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
new file mode 100644
index 0000000..c6a31bf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
new file mode 100644
index 0000000..0448ac3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
+
+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
+
+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
new file mode 100644
index 0000000..2e3f289
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
+#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+
+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
+
+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#define AT91_PMC_DIV (0xff << 0) /* Divider */
+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
+#define AT91_PMC_CSS_SLOW (0 << 0)
+#define AT91_PMC_CSS_MAIN (1 << 0)
+#define AT91_PMC_CSS_PLLA (2 << 0)
+#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_2 (1 << 2)
+#define AT91_PMC_PRES_4 (2 << 2)
+#define AT91_PMC_PRES_8 (3 << 2)
+#define AT91_PMC_PRES_16 (4 << 2)
+#define AT91_PMC_PRES_32 (5 << 2)
+#define AT91_PMC_PRES_64 (6 << 2)
+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
+#define AT91RM9200_PMC_MDIV_2 (1 << 8)
+#define AT91RM9200_PMC_MDIV_3 (2 << 8)
+#define AT91RM9200_PMC_MDIV_4 (3 << 8)
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_2 (1 << 8)
+#define AT91SAM9_PMC_MDIV_4 (2 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
+#define AT91_PMC_PDIV_1 (0 << 12)
+#define AT91_PMC_PDIV_2 (1 << 12)
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+
+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
new file mode 100644
index 0000000..7cd1b39
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
+#define AT91_RSTC_RSTTYP_USER (4 << 8)
+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
new file mode 100644
index 0000000..e56f470
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
+#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
+#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
+#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
+#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
+#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
+#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
+
+#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
+#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
+
+#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
+#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
+#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
+#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
+#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
+
+#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
+#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
+#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
+#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
+#define AT91_RTC_DAY (7 << 21) /* Current Day */
+#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
+
+#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
+#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
+#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
+#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
+
+#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
+#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
+#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
+
+#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
+#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
+#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
+#define AT91_RTC_SECEV (1 << 2) /* Second Event */
+#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
+#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
+
+#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
+#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
+#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
+#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
+
+#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
+#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
+#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
+#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
+#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
new file mode 100644
index 0000000..71782e5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
+#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
+#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
+#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
+#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
+
+#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
+#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
+
+#define AT91_RTT_VR 0x08 /* Real-time Value Register */
+#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
+
+#define AT91_RTT_SR 0x0c /* Real-time Status Register */
+#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
+#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
new file mode 100644
index 0000000..60be5ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
+#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */
+#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
+#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
+#define AT91_SHDW_WKMODE0_NONE 0
+#define AT91_SHDW_WKMODE0_HIGH 1
+#define AT91_SHDW_WKMODE0_LOW 2
+#define AT91_SHDW_WKMODE0_ANYLEVEL 3
+#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
+#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
+#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
+#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
new file mode 100644
index 0000000..2f6ba0c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR 0x00 /* Control Register */
+#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
+#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
+#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR 0x04 /* Mode Register */
+#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
+#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
+#define AT91_SPI_PS_FIXED (0 << 1)
+#define AT91_SPI_PS_VARIABLE (1 << 1)
+#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
+#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
+#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR 0x08 /* Receive Data Register */
+#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+
+#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
+#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR 0x10 /* Status Register */
+#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
+#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
+#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
+#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
+#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
+#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
+#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
+#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
+#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
+#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
+#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
+
+#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
+#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
+#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
+#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
+#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
+#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
+#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
+#define AT91_SPI_BITS_8 (0 << 4)
+#define AT91_SPI_BITS_9 (1 << 4)
+#define AT91_SPI_BITS_10 (2 << 4)
+#define AT91_SPI_BITS_11 (3 << 4)
+#define AT91_SPI_BITS_12 (4 << 4)
+#define AT91_SPI_BITS_13 (5 << 4)
+#define AT91_SPI_BITS_14 (6 << 4)
+#define AT91_SPI_BITS_15 (7 << 4)
+#define AT91_SPI_BITS_16 (8 << 4)
+#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
+#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
+#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
new file mode 100644
index 0000000..a81114c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR 0x00 /* Control Register */
+#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
+#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
+#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
+#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
+#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
+
+#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
+#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
+
+#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
+#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
+#define AT91_SSC_CKS_DIV (0 << 0)
+#define AT91_SSC_CKS_CLOCK (1 << 0)
+#define AT91_SSC_CKS_PIN (2 << 0)
+#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
+#define AT91_SSC_CKO_NONE (0 << 2)
+#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
+#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
+#define AT91_SSC_CKI_FALLING (0 << 5)
+#define AT91_SSC_CK_RISING (1 << 5)
+#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define AT91_SSC_CKG_NONE (0 << 6)
+#define AT91_SSC_CKG_RFLOW (1 << 6)
+#define AT91_SSC_CKG_RFHIGH (2 << 6)
+#define AT91_SSC_START (0xf << 8) /* Start Selection */
+#define AT91_SSC_START_CONTINUOUS (0 << 8)
+#define AT91_SSC_START_TX_RX (1 << 8)
+#define AT91_SSC_START_LOW_RF (2 << 8)
+#define AT91_SSC_START_HIGH_RF (3 << 8)
+#define AT91_SSC_START_FALLING_RF (4 << 8)
+#define AT91_SSC_START_RISING_RF (5 << 8)
+#define AT91_SSC_START_LEVEL_RF (6 << 8)
+#define AT91_SSC_START_EDGE_RF (7 << 8)
+#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
+#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
+#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
+
+#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
+#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
+#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
+#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
+#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
+#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
+#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
+#define AT91_SSC_FSOS_NONE (0 << 20)
+#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
+#define AT91_SSC_FSOS_POSITIVE (2 << 20)
+#define AT91_SSC_FSOS_LOW (3 << 20)
+#define AT91_SSC_FSOS_HIGH (4 << 20)
+#define AT91_SSC_FSOS_TOGGLE (5 << 20)
+#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
+#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
+#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
+
+#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
+#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
+#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
+#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
+#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
+#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR 0x40 /* Status Register */
+#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
+#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
+#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
+#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
+#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
+#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
+#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
+#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
+#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
+#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
+#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
+#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
+#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
+#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
+
+#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
+#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
+#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
new file mode 100644
index 0000000..8847173
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
+#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
+#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
+
+#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
+#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
+#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
+#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
+#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
+
+#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
+#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
+#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
+#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
+#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
+
+#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
+#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
+#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
+
+#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
+#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
+
+#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
+#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
new file mode 100644
index 0000000..46a317f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
+#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
+
+#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
+#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
+#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
+#define AT91_TC_TC0XC0S_NONE (1 << 0)
+#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
+#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
+#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
+#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
+#define AT91_TC_TC1XC1S_NONE (1 << 2)
+#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
+#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
+#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
+#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
+#define AT91_TC_TC2XC2S_NONE (1 << 4)
+#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
+#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
+
+
+#define AT91_TC_CCR 0x00 /* Channel Control Register */
+#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
+#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
+#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
+
+#define AT91_TC_CMR 0x04 /* Channel Mode Register */
+#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
+#define AT91_TC_TIMER_CLOCK1 (0 << 0)
+#define AT91_TC_TIMER_CLOCK2 (1 << 0)
+#define AT91_TC_TIMER_CLOCK3 (2 << 0)
+#define AT91_TC_TIMER_CLOCK4 (3 << 0)
+#define AT91_TC_TIMER_CLOCK5 (4 << 0)
+#define AT91_TC_XC0 (5 << 0)
+#define AT91_TC_XC1 (6 << 0)
+#define AT91_TC_XC2 (7 << 0)
+#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
+#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
+#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
+#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
+#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
+#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
+#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
+#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
+#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
+
+#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
+#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
+#define AT91_TC_EEVTEDG_NONE (0 << 8)
+#define AT91_TC_EEVTEDG_RISING (1 << 8)
+#define AT91_TC_EEVTEDG_FALLING (2 << 8)
+#define AT91_TC_EEVTEDG_BOTH (3 << 8)
+#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
+#define AT91_TC_EEVT_TIOB (0 << 10)
+#define AT91_TC_EEVT_XC0 (1 << 10)
+#define AT91_TC_EEVT_XC1 (2 << 10)
+#define AT91_TC_EEVT_XC2 (3 << 10)
+#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
+#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
+#define AT91_TC_WAVESEL_UP (0 << 13)
+#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
+#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
+#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
+#define AT91_TC_ACPA_NONE (0 << 16)
+#define AT91_TC_ACPA_SET (1 << 16)
+#define AT91_TC_ACPA_CLEAR (2 << 16)
+#define AT91_TC_ACPA_TOGGLE (3 << 16)
+#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
+#define AT91_TC_ACPC_NONE (0 << 18)
+#define AT91_TC_ACPC_SET (1 << 18)
+#define AT91_TC_ACPC_CLEAR (2 << 18)
+#define AT91_TC_ACPC_TOGGLE (3 << 18)
+#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
+#define AT91_TC_AEEVT_NONE (0 << 20)
+#define AT91_TC_AEEVT_SET (1 << 20)
+#define AT91_TC_AEEVT_CLEAR (2 << 20)
+#define AT91_TC_AEEVT_TOGGLE (3 << 20)
+#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
+#define AT91_TC_ASWTRG_NONE (0 << 22)
+#define AT91_TC_ASWTRG_SET (1 << 22)
+#define AT91_TC_ASWTRG_CLEAR (2 << 22)
+#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
+#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
+#define AT91_TC_BCPB_NONE (0 << 24)
+#define AT91_TC_BCPB_SET (1 << 24)
+#define AT91_TC_BCPB_CLEAR (2 << 24)
+#define AT91_TC_BCPB_TOGGLE (3 << 24)
+#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
+#define AT91_TC_BCPC_NONE (0 << 26)
+#define AT91_TC_BCPC_SET (1 << 26)
+#define AT91_TC_BCPC_CLEAR (2 << 26)
+#define AT91_TC_BCPC_TOGGLE (3 << 26)
+#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
+#define AT91_TC_BEEVT_NONE (0 << 28)
+#define AT91_TC_BEEVT_SET (1 << 28)
+#define AT91_TC_BEEVT_CLEAR (2 << 28)
+#define AT91_TC_BEEVT_TOGGLE (3 << 28)
+#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
+#define AT91_TC_BSWTRG_NONE (0 << 30)
+#define AT91_TC_BSWTRG_SET (1 << 30)
+#define AT91_TC_BSWTRG_CLEAR (2 << 30)
+#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
+
+#define AT91_TC_CV 0x10 /* Counter Value */
+#define AT91_TC_RA 0x14 /* Register A */
+#define AT91_TC_RB 0x18 /* Register B */
+#define AT91_TC_RC 0x1c /* Register C */
+
+#define AT91_TC_SR 0x20 /* Status Register */
+#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
+#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
+#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
+#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
+#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
+#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
+#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
+#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
+#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
+#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
+#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
+
+#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
new file mode 100644
index 0000000..bb2880f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define AT91_TWI_CR 0x00 /* Control Register */
+#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
+#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
+#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
+#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
+#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
+
+#define AT91_TWI_MMR 0x04 /* Master Mode Register */
+#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
+#define AT91_TWI_IADRSZ_NO (0 << 8)
+#define AT91_TWI_IADRSZ_1 (1 << 8)
+#define AT91_TWI_IADRSZ_2 (2 << 8)
+#define AT91_TWI_IADRSZ_3 (3 << 8)
+#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
+#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
+
+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
+
+#define AT91_TWI_IADR 0x0c /* Internal Address Register */
+
+#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
+#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
+#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
+#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
+
+#define AT91_TWI_SR 0x20 /* Status Register */
+#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
+#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
+#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
+#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
+#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
+#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
+
+#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
+#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
+#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
+#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
+
+#endif
+
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
new file mode 100644
index 0000000..973b452
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
+#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
+#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
+#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
+#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
+#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
+#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
+#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
+#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
+#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
+#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
+
+#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
+#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
+#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
new file mode 100644
index 0000000..4a4b641
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0 8 /* USART 0 */
+#define AT91CAP9_ID_US1 9 /* USART 1 */
+#define AT91CAP9_ID_US2 10 /* USART 2 */
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN 13 /* CAN */
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS 0xfff78000
+#define AT91CAP9_BASE_TCB0 0xfff7c000
+#define AT91CAP9_BASE_TC0 0xfff7c000
+#define AT91CAP9_BASE_TC1 0xfff7c040
+#define AT91CAP9_BASE_TC2 0xfff7c080
+#define AT91CAP9_BASE_MCI0 0xfff80000
+#define AT91CAP9_BASE_MCI1 0xfff84000
+#define AT91CAP9_BASE_TWI 0xfff88000
+#define AT91CAP9_BASE_US0 0xfff8c000
+#define AT91CAP9_BASE_US1 0xfff90000
+#define AT91CAP9_BASE_US2 0xfff94000
+#define AT91CAP9_BASE_SSC0 0xfff98000
+#define AT91CAP9_BASE_SSC1 0xfff9c000
+#define AT91CAP9_BASE_AC97C 0xfffa0000
+#define AT91CAP9_BASE_SPI0 0xfffa4000
+#define AT91CAP9_BASE_SPI1 0xfffa8000
+#define AT91CAP9_BASE_CAN 0xfffac000
+#define AT91CAP9_BASE_PWMC 0xfffb8000
+#define AT91CAP9_BASE_EMAC 0xfffbc000
+#define AT91CAP9_BASE_ADC 0xfffc0000
+#define AT91CAP9_BASE_ISI 0xfffc4000
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91CAP9_BASE_US0
+#define AT91_USART1 AT91CAP9_BASE_US1
+#define AT91_USART2 AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
new file mode 100644
index 0000000..bca878f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
+#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
+#define AT91_DDRSDRC_MODE_NORMAL 0
+#define AT91_DDRSDRC_MODE_NOP 1
+#define AT91_DDRSDRC_MODE_PRECHARGE 2
+#define AT91_DDRSDRC_MODE_LMR 3
+#define AT91_DDRSDRC_MODE_REFRESH 4
+#define AT91_DDRSDRC_MODE_EXT_LMR 5
+#define AT91_DDRSDRC_MODE_DEEP 6
+
+#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_DDRSDRC_NR_11 (0 << 2)
+#define AT91_DDRSDRC_NR_12 (1 << 2)
+#define AT91_DDRSDRC_NR_13 (2 << 2)
+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
+#define AT91_DDRSDRC_CAS_2 (2 << 4)
+#define AT91_DDRSDRC_CAS_3 (3 << 4)
+#define AT91_DDRSDRC_CAS_25 (6 << 4)
+#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
+#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_DDRSDRC_LPCB_DISABLE 0
+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD_SDR 0
+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
+#define AT91_DDRSDRC_MD_DDR 2
+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
+
+#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
+#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
+#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
+#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
+#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
+#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
new file mode 100644
index 0000000..4b9d4af
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
+#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
+#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
+#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
new file mode 100644
index 0000000..7898315
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripheral */
+#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91RM9200_ID_US0 6 /* USART 0 */
+#define AT91RM9200_ID_US1 7 /* USART 1 */
+#define AT91RM9200_ID_US2 8 /* USART 2 */
+#define AT91RM9200_ID_US3 9 /* USART 3 */
+#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP 11 /* USB Device Port */
+#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
+#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
+#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
+#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
+#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
+#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
+#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
+#define AT91RM9200_ID_UHP 23 /* USB Host port */
+#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0 0xfffa0000
+#define AT91RM9200_BASE_TC0 0xfffa0000
+#define AT91RM9200_BASE_TC1 0xfffa0040
+#define AT91RM9200_BASE_TC2 0xfffa0080
+#define AT91RM9200_BASE_TCB1 0xfffa4000
+#define AT91RM9200_BASE_TC3 0xfffa4000
+#define AT91RM9200_BASE_TC4 0xfffa4040
+#define AT91RM9200_BASE_TC5 0xfffa4080
+#define AT91RM9200_BASE_UDP 0xfffb0000
+#define AT91RM9200_BASE_MCI 0xfffb4000
+#define AT91RM9200_BASE_TWI 0xfffb8000
+#define AT91RM9200_BASE_EMAC 0xfffbc000
+#define AT91RM9200_BASE_US0 0xfffc0000
+#define AT91RM9200_BASE_US1 0xfffc4000
+#define AT91RM9200_BASE_US2 0xfffc8000
+#define AT91RM9200_BASE_US3 0xfffcc000
+#define AT91RM9200_BASE_SSC0 0xfffd0000
+#define AT91RM9200_BASE_SSC1 0xfffd4000
+#define AT91RM9200_BASE_SSC2 0xfffd8000
+#define AT91RM9200_BASE_SPI 0xfffe0000
+#define AT91_BASE_SYS 0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
+#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
+#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
+
+#define AT91_USART0 AT91RM9200_BASE_US0
+#define AT91_USART1 AT91RM9200_BASE_US1
+#define AT91_USART2 AT91RM9200_BASE_US2
+#define AT91_USART3 AT91RM9200_BASE_US3
+
+#define AT91_MATRIX 0 /* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
new file mode 100644
index 0000000..b8260cd
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define AT91_EMAC_CTL 0x00 /* Control Register */
+#define AT91_EMAC_LB (1 << 0) /* Loopback */
+#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */
+#define AT91_EMAC_RE (1 << 2) /* Receive Enable */
+#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */
+#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */
+#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */
+#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */
+#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */
+#define AT91_EMAC_BP (1 << 8) /* Back Pressure */
+
+#define AT91_EMAC_CFG 0x04 /* Configuration Register */
+#define AT91_EMAC_SPD (1 << 0) /* Speed */
+#define AT91_EMAC_FD (1 << 1) /* Full Duplex */
+#define AT91_EMAC_BR (1 << 2) /* Bit Rate */
+#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */
+#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */
+#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */
+#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */
+#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */
+#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */
+#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */
+#define AT91_EMAC_CLK_DIV8 (0 << 10)
+#define AT91_EMAC_CLK_DIV16 (1 << 10)
+#define AT91_EMAC_CLK_DIV32 (2 << 10)
+#define AT91_EMAC_CLK_DIV64 (3 << 10)
+#define AT91_EMAC_RTY (1 << 12) /* Retry Test */
+#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */
+
+#define AT91_EMAC_SR 0x08 /* Status Register */
+#define AT91_EMAC_SR_LINK (1 << 0) /* Link */
+#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */
+#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */
+
+#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */
+
+#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */
+#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */
+#define AT91_EMAC_NCRC (1 << 15) /* No CRC */
+
+#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */
+#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */
+#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */
+#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */
+#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */
+#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */
+#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */
+#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */
+
+#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */
+
+#define AT91_EMAC_RSR 0x20 /* Receive Status Register */
+#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */
+#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */
+#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */
+
+#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */
+#define AT91_EMAC_DONE (1 << 0) /* Management Done */
+#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */
+#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */
+#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */
+#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */
+#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */
+#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */
+#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */
+#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */
+#define AT91_EMAC_LINK (1 << 9) /* Link */
+#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */
+#define AT91_EMAC_ABT (1 << 11) /* Abort */
+
+#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */
+#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */
+#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */
+
+#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */
+#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */
+#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */
+#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */
+#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */
+#define AT91_EMAC_RW_W (1 << 28)
+#define AT91_EMAC_RW_R (2 << 28)
+#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */
+#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */
+#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */
+#define AT91_EMAC_OK 0x4c /* Frames Received OK */
+#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */
+#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */
+#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL 0x5c /* Late Collision */
+#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */
+#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */
+#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */
+#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */
+#define AT91_EMAC_ROV 0x70 /* Receive Overrun */
+#define AT91_EMAC_CDE 0x74 /* Code Error */
+#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */
+#define AT91_EMAC_RJB 0x7c /* Receive Jabber */
+#define AT91_EMAC_USF 0x80 /* Undersize Frame */
+#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
new file mode 100644
index 0000000..d34e4ed
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
+#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
+
+#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
+#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
+#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
+#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
+#define AT91_MC_ABTSZ_BYTE (0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
+#define AT91_MC_ABTSZ_WORD (2 << 8)
+#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
+#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
+#define AT91_MC_ABTTYP_FETCH (2 << 10)
+#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
+#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
+#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
+#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
+#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
+#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
+#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
+#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
+
+#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
+#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
+#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
+#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
+#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
+#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
+#define AT91_EBI_CS0A_SMC (0 << 0)
+#define AT91_EBI_CS0A_BFC (1 << 0)
+#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_EBI_CS1A_SMC (0 << 1)
+#define AT91_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
+#define AT91_EBI_CS3A_SMC (0 << 3)
+#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
+#define AT91_EBI_CS4A_SMC (0 << 4)
+#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
+#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
+#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
+#define AT91_SMC_NWS_(x) ((x) << 0)
+#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
+#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
+#define AT91_SMC_TDF_(x) ((x) << 8)
+#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
+#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
+#define AT91_SMC_DBW_16 (1 << 13)
+#define AT91_SMC_DBW_8 (2 << 13)
+#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
+#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
+#define AT91_SMC_ACSS_STD (0 << 16)
+#define AT91_SMC_ACSS_1 (1 << 16)
+#define AT91_SMC_ACSS_2 (2 << 16)
+#define AT91_SMC_ACSS_3 (3 << 16)
+#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
+#define AT91_SMC_RWSETUP_(x) ((x) << 24)
+#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
+#define AT91_SMC_RWHOLD_(x) ((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91_SDRAMC_MODE_NOP (1 << 0)
+#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91_SDRAMC_MODE_LMR (3 << 0)
+#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 4)
+#define AT91_SDRAMC_DBW_16 (1 << 4)
+
+#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
+#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
+#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
+#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
+#define AT91_BFC_BFCOM_DISABLED (0 << 0)
+#define AT91_BFC_BFCOM_ASYNC (1 << 0)
+#define AT91_BFC_BFCOM_BURST (2 << 0)
+#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
+#define AT91_BFC_BFCC_MCK (1 << 2)
+#define AT91_BFC_BFCC_DIV2 (2 << 2)
+#define AT91_BFC_BFCC_DIV4 (3 << 2)
+#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
+#define AT91_BFC_PAGES (7 << 8) /* Page Size */
+#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
+#define AT91_BFC_PAGES_16 (1 << 8)
+#define AT91_BFC_PAGES_32 (2 << 8)
+#define AT91_BFC_PAGES_64 (3 << 8)
+#define AT91_BFC_PAGES_128 (4 << 8)
+#define AT91_BFC_PAGES_256 (5 << 8)
+#define AT91_BFC_PAGES_512 (6 << 8)
+#define AT91_BFC_PAGES_1024 (7 << 8)
+#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
+#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
+#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
+#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
+#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
new file mode 100644
index 0000000..43c396b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0 6 /* USART 0 */
+#define AT91SAM9260_ID_US1 7 /* USART 1 */
+#define AT91SAM9260_ID_US2 8 /* USART 2 */
+#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP 20 /* USB Host port */
+#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
+#define AT91SAM9260_ID_US3 23 /* USART 3 */
+#define AT91SAM9260_ID_US4 24 /* USART 4 */
+#define AT91SAM9260_ID_US5 25 /* USART 5 */
+#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0 0xfffa0000
+#define AT91SAM9260_BASE_TC0 0xfffa0000
+#define AT91SAM9260_BASE_TC1 0xfffa0040
+#define AT91SAM9260_BASE_TC2 0xfffa0080
+#define AT91SAM9260_BASE_UDP 0xfffa4000
+#define AT91SAM9260_BASE_MCI 0xfffa8000
+#define AT91SAM9260_BASE_TWI 0xfffac000
+#define AT91SAM9260_BASE_US0 0xfffb0000
+#define AT91SAM9260_BASE_US1 0xfffb4000
+#define AT91SAM9260_BASE_US2 0xfffb8000
+#define AT91SAM9260_BASE_SSC 0xfffbc000
+#define AT91SAM9260_BASE_ISI 0xfffc0000
+#define AT91SAM9260_BASE_EMAC 0xfffc4000
+#define AT91SAM9260_BASE_SPI0 0xfffc8000
+#define AT91SAM9260_BASE_SPI1 0xfffcc000
+#define AT91SAM9260_BASE_US3 0xfffd0000
+#define AT91SAM9260_BASE_US4 0xfffd4000
+#define AT91SAM9260_BASE_US5 0xfffd8000
+#define AT91SAM9260_BASE_TCB1 0xfffdc000
+#define AT91SAM9260_BASE_TC3 0xfffdc000
+#define AT91SAM9260_BASE_TC4 0xfffdc040
+#define AT91SAM9260_BASE_TC5 0xfffdc080
+#define AT91SAM9260_BASE_ADC 0xfffe0000
+#define AT91_BASE_SYS 0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9260_BASE_US0
+#define AT91_USART1 AT91SAM9260_BASE_US1
+#define AT91_USART2 AT91SAM9260_BASE_US2
+#define AT91_USART3 AT91SAM9260_BASE_US3
+#define AT91_USART4 AT91SAM9260_BASE_US4
+#define AT91_USART5 AT91SAM9260_BASE_US5
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+
+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+
+#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
new file mode 100644
index 0000000..f027de5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 0000000..3a348ca
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0 6 /* USART 0 */
+#define AT91SAM9261_ID_US1 7 /* USART 1 */
+#define AT91SAM9261_ID_US2 8 /* USART 2 */
+#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP 20 /* USB Host port */
+#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
+#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0 0xfffa0000
+#define AT91SAM9261_BASE_TC0 0xfffa0000
+#define AT91SAM9261_BASE_TC1 0xfffa0040
+#define AT91SAM9261_BASE_TC2 0xfffa0080
+#define AT91SAM9261_BASE_UDP 0xfffa4000
+#define AT91SAM9261_BASE_MCI 0xfffa8000
+#define AT91SAM9261_BASE_TWI 0xfffac000
+#define AT91SAM9261_BASE_US0 0xfffb0000
+#define AT91SAM9261_BASE_US1 0xfffb4000
+#define AT91SAM9261_BASE_US2 0xfffb8000
+#define AT91SAM9261_BASE_SSC0 0xfffbc000
+#define AT91SAM9261_BASE_SSC1 0xfffc0000
+#define AT91SAM9261_BASE_SSC2 0xfffc4000
+#define AT91SAM9261_BASE_SPI0 0xfffc8000
+#define AT91SAM9261_BASE_SPI1 0xfffcc000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9261_BASE_US0
+#define AT91_USART1 AT91SAM9261_BASE_US1
+#define AT91_USART2 AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 0000000..db62b1f1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
new file mode 100644
index 0000000..2091f1e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0 7 /* USART 0 */
+#define AT91SAM9263_ID_US1 8 /* USART 1 */
+#define AT91SAM9263_ID_US2 9 /* USART 2 */
+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN 12 /* CAN */
+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP 0xfff78000
+#define AT91SAM9263_BASE_TCB0 0xfff7c000
+#define AT91SAM9263_BASE_TC0 0xfff7c000
+#define AT91SAM9263_BASE_TC1 0xfff7c040
+#define AT91SAM9263_BASE_TC2 0xfff7c080
+#define AT91SAM9263_BASE_MCI0 0xfff80000
+#define AT91SAM9263_BASE_MCI1 0xfff84000
+#define AT91SAM9263_BASE_TWI 0xfff88000
+#define AT91SAM9263_BASE_US0 0xfff8c000
+#define AT91SAM9263_BASE_US1 0xfff90000
+#define AT91SAM9263_BASE_US2 0xfff94000
+#define AT91SAM9263_BASE_SSC0 0xfff98000
+#define AT91SAM9263_BASE_SSC1 0xfff9c000
+#define AT91SAM9263_BASE_AC97C 0xfffa0000
+#define AT91SAM9263_BASE_SPI0 0xfffa4000
+#define AT91SAM9263_BASE_SPI1 0xfffa8000
+#define AT91SAM9263_BASE_CAN 0xfffac000
+#define AT91SAM9263_BASE_PWMC 0xfffb8000
+#define AT91SAM9263_BASE_EMAC 0xfffbc000
+#define AT91SAM9263_BASE_ISI 0xfffc4000
+#define AT91SAM9263_BASE_2DGE 0xfffc8000
+#define AT91_BASE_SYS 0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9263_BASE_US0
+#define AT91_USART1 AT91SAM9263_BASE_US1
+#define AT91_USART2 AT91SAM9263_BASE_US2
+
+#define AT91_SMC AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
new file mode 100644
index 0000000..9b3efd3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
new file mode 100644
index 0000000..1921181
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL 0
+#define AT91_SDRAMC_MODE_NOP 1
+#define AT91_SDRAMC_MODE_PRECHARGE 2
+#define AT91_SDRAMC_MODE_LMR 3
+#define AT91_SDRAMC_MODE_REFRESH 4
+#define AT91_SDRAMC_MODE_EXT_LMR 5
+#define AT91_SDRAMC_MODE_DEEP 6
+
+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_1 (1 << 5)
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_CAS_3 (3 << 5)
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 7)
+#define AT91_SDRAMC_DBW_16 (1 << 7)
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_SDRAMC_LPCB_DISABLE 0
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+#define AT91_SDRAMC_MD_SDRAM 0
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 0000000..ec6ad13
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+
+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+
+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+#define AT91_SMC_TDF_(x) ((x) << 16)
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+#define AT91_SMC_PS (3 << 28) /* Page Size */
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
new file mode 100644
index 0000000..fc2de6c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller */
+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
+#define AT91SAM9RL_BASE_TC0 0xfffa0000
+#define AT91SAM9RL_BASE_TC1 0xfffa0040
+#define AT91SAM9RL_BASE_TC2 0xfffa0080
+#define AT91SAM9RL_BASE_MCI 0xfffa4000
+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
+#define AT91SAM9RL_BASE_TWI1 0xfffac000
+#define AT91SAM9RL_BASE_US0 0xfffb0000
+#define AT91SAM9RL_BASE_US1 0xfffb4000
+#define AT91SAM9RL_BASE_US2 0xfffb8000
+#define AT91SAM9RL_BASE_US3 0xfffbc000
+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
+#define AT91SAM9RL_BASE_SPI 0xfffcc000
+#define AT91SAM9RL_BASE_TSC 0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
+#define AT91_BASE_SYS 0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9RL_BASE_US0
+#define AT91_USART1 AT91SAM9RL_BASE_US1
+#define AT91_USART2 AT91SAM9RL_BASE_US2
+#define AT91_USART3 AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
new file mode 100644
index 0000000..5f91490
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
new file mode 100644
index 0000000..d34cdb8
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91x40.h
+ *
+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91X40_H
+#define AT91X40_H
+
+/*
+ * IRQ list.
+ */
+#define AT91_ID_FIQ 0 /* FIQ */
+#define AT91_ID_SYS 1 /* System Peripheral */
+#define AT91X40_ID_USART0 2 /* USART port 0 */
+#define AT91X40_ID_USART1 3 /* USART port 1 */
+#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
+#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/
+#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/
+#define AT91X40_ID_WD 7 /* Watchdog? */
+#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */
+
+#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */
+#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */
+#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_BASE_SYS 0xffc00000
+
+#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */
+#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */
+#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */
+#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */
+#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */
+#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
+#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
+#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+
+/*
+ * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
+ * But it does have a chip identify register and extension ID, so define at
+ * least these here.
+ */
+#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
+#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
+
+#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
new file mode 100644
index 0000000..acd60f2
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers. For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+ /* USB Device */
+struct at91_udc_data {
+ u8 vbus_pin; /* high == host powering us */
+ u8 pullup_pin; /* active == D+ pulled up */
+ u8 pullup_active_low; /* true == pullup_pin is active low */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+ u8 irq_pin; /* I/O IRQ */
+ u8 det_pin; /* Card detect */
+ u8 vcc_pin; /* power switching */
+ u8 rst_pin; /* card reset */
+ u8 chipselect; /* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+ u8 det_pin; /* card detect IRQ */
+ unsigned slot_b:1; /* uses Slot B */
+ unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
+ u8 wp_pin; /* (SD) writeprotect detect */
+ u8 vcc_pin; /* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+ /* Ethernet (EMAC & MACB) */
+struct at91_eth_data {
+ u32 phy_mask;
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#define eth_platform_data at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+ u8 ports; /* number of ports on root hub */
+ u8 vbus_pin[]; /* port power-control pin */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+ u8 enable_pin; /* chip enable */
+ u8 det_pin; /* card detect */
+ u8 rdy_pin; /* ready/busy */
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 bus_width_16; /* buswidth is 16 bit */
+ struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS 0x01
+#define ATMEL_UART_RTS 0x02
+#define ATMEL_UART_DSR 0x04
+#define ATMEL_UART_DTR 0x08
+#define ATMEL_UART_DCD 0x10
+#define ATMEL_UART_RI 0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
+struct at91_uart_config {
+ unsigned short console_tty; /* tty number of serial console */
+ unsigned short nr_tty; /* number of serial tty's */
+ short tty_map[]; /* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+ short use_dma_tx; /* use transmit DMA? */
+ short use_dma_rx; /* use receive DMA? */
+ void __iomem *regs; /* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+/*
+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
+ * platform devices. Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK 0x01
+#define ATMEL_SSC_TF 0x02
+#define ATMEL_SSC_TD 0x04
+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK 0x10
+#define ATMEL_SSC_RF 0x20
+#define ATMEL_SSC_RD 0x40
+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+ u8 reset_pin; /* reset */
+};
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
+ /* LEDs */
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
new file mode 100644
index 0000000..dbfd9f7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-at91/include/mach/cpu.h
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200 0x09290780
+#define ARCH_ID_AT91SAM9260 0x019803a0
+#define ARCH_ID_AT91SAM9261 0x019703a0
+#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G20 0x019905a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91CAP9 0x039A03A0
+
+#define ARCH_ID_AT91SAM9XE128 0x329973a0
+#define ARCH_ID_AT91SAM9XE256 0x329a93a0
+#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+
+#define ARCH_ID_AT91M40800 0x14080044
+#define ARCH_ID_AT91R40807 0x44080746
+#define ARCH_ID_AT91M40807 0x14080745
+#define ARCH_ID_AT91R40008 0x44000840
+
+static inline unsigned long at91_cpu_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92 0x09200000
+#define ARCH_FAMILY_AT91SAM9 0x01900000
+#define ARCH_FAMILY_AT91SAM9XE 0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe() (0)
+#define cpu_is_at91sam9260() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9() (0)
+#endif
+
+/*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at32ap7000() (0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
new file mode 100644
index 0000000..29052ba
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
+ ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+ beq 1001b
+ .endm
+
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
new file mode 100644
index 0000000..e4f90c1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-at91/include/mach/dma.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
new file mode 100644
index 0000000..7ab68f9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+ streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ .endm
+
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 0000000..76d76e2
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,252 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS 5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
+#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
+#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
+#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
+#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
+#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
+#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
+#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
+#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
+#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
+#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
+#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
+#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
+#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
+#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
+#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
+#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
+#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
+#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
+#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
+#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
+#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
+#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
+#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
+#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
+#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
+#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
+#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
+#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
+#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
+#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
+#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
+
+#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
+#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
+#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
+#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
+#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
+#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
+#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
+#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
+#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
+#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
+#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
+#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
+#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
+#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
+#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
+#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
+#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
+#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
+#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
+#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
+#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
+#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
+#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
+#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
+#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
+#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
+#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
+#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
+#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
+#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
+#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
+#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
+
+#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
+#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
+#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
+#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
+#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
+#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
+#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
+#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
+#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
+#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
+#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
+#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
+#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
+#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
+#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
+#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
+#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
+#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
+#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
+#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
+#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
+#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
+#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
+#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
+#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
+#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
+#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
+#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
+#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
+#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
+#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
+#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
+
+#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
+#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
+#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
+#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
+#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
+#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
+#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
+#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
+#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
+#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
+#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
+#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
+#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
+#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
+#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
+#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
+#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
+#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
+#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
+#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
+#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
+#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
+#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
+#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
+#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
+#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
+#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
+#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
+#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
+#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
+#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
+#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
+
+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+/*-------------------------------------------------------------------------*/
+
+/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+ * eventually be removed (along with this errno.h inclusion), and the
+ * gpio request/free calls should probably be implemented.
+ */
+
+#include <asm/errno.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return at91_get_gpio_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ at91_set_gpio_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 0000000..da0b681
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-at91/include/mach/hardware.h
+ *
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <mach/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#include <mach/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <mach/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <mach/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+#ifdef CONFIG_MMU
+/*
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000. (544Kb)
+ */
+#define AT91_IO_PHYS_BASE 0xFFF78000
+#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX SZ_1M
+#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0 0x10000000
+#define AT91_CHIPSELECT_1 0x20000000
+#define AT91_CHIPSELECT_2 0x30000000
+#define AT91_CHIPSELECT_3 0x40000000
+#define AT91_CHIPSELECT_4 0x50000000
+#define AT91_CHIPSELECT_5 0x60000000
+#define AT91_CHIPSELECT_6 0x70000000
+#define AT91_CHIPSELECT_7 0x80000000
+
+/* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE CONFIG_DRAM_BASE
+#else
+#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
+#endif
+
+/* Clocks */
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 0000000..1611bd0
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ __raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
new file mode 100644
index 0000000..bda29ccb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/irqs.h
+ *
+ * Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/io.h>
+#include <mach/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ * (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 5 banks of GPIO.
+ */
+#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
+
+/* FIQ is AIC source 0. */
+#define FIQ_START AT91_ID_FIQ
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
new file mode 100644
index 0000000..9dd1b8c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/memory.h
+ *
+ * Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+#define PHYS_OFFSET (AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
new file mode 100644
index 0000000..e712658
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/system.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+ /*
+ * Set the processor (CP15) into 'Wait for Interrupt' mode.
+ * Unlike disabling the processor clock via the PMC (above)
+ * this allows the processor to be woken via JTAG.
+ */
+ cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+ /* call the CPU-specific reset function */
+ if (at91_arch_reset)
+ (at91_arch_reset)();
+}
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
new file mode 100644
index 0000000..d84c994
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-at91/include/mach/timex.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <mach/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
+#define AT91SAM9_MASTER_CLOCK 99300000
+#endif
+
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK 99300000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK 90000000
+#else
+#define AT91SAM9_MASTER_CLOCK 99959500
+#endif
+
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK 132096000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91X40)
+
+#define AT91X40_MASTER_CLOCK 40000000
+#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
new file mode 100644
index 0000000..0410d54
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-at91/include/mach/uncompress.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <linux/atmel_serial.h>
+
+#if defined(CONFIG_AT91_EARLY_DBGU)
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#elif defined(CONFIG_AT91_EARLY_USART0)
+#define UART_OFFSET AT91_USART0
+#elif defined(CONFIG_AT91_EARLY_USART1)
+#define UART_OFFSET AT91_USART1
+#elif defined(CONFIG_AT91_EARLY_USART2)
+#define UART_OFFSET AT91_USART2
+#elif defined(CONFIG_AT91_EARLY_USART3)
+#define UART_OFFSET AT91_USART3
+#elif defined(CONFIG_AT91_EARLY_USART4)
+#define UART_OFFSET AT91_USART4
+#elif defined(CONFIG_AT91_EARLY_USART5)
+#define UART_OFFSET AT91_USART5
+#endif
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+#ifdef UART_OFFSET
+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+
+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+ barrier();
+ __raw_writel(c, sys + ATMEL_US_THR);
+#endif
+}
+
+static inline void flush(void)
+{
+#ifdef UART_OFFSET
+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+
+ /* wait for transmission to complete */
+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+ barrier();
+#endif
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
new file mode 100644
index 0000000..8eb459f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-at91/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index a1bfc12..da3494a 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,7 +25,7 @@
#include <linux/mm.h>
#include <linux/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index f064b7a..fec03c5 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,8 +13,8 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a5cfe86..ec2fe4c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -24,14 +24,14 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
#include "generic.h"
#ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -41,7 +41,7 @@
#define sdram_selfrefresh_disable() do {} while (0)
#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
static u32 saved_lpr;
@@ -58,7 +58,7 @@
#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
#else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
#ifdef CONFIG_ARCH_AT91SAM9263
/*
@@ -91,8 +91,8 @@
*/
#if defined(AT91_SHDWC)
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
static void __init show_reset_status(void)
{
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 25d18b7..474616d 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
#include <linux/string.h>
#include <linux/mm.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/sizes.h>
#include <asm/io.h>
#include <asm/setup.h>
@@ -33,7 +33,7 @@
#include <asm/page.h>
#include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
#include "common.h"
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 8520cb0..aa02aa5 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
#include <linux/string.h>
#include <linux/mm.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 9444ab1..8ada201 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
#include <linux/kernel.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 06f64ec..c58e32e 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index c457a35..7122b3d 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <linux/initrd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
similarity index 100%
rename from include/asm-arm/arch-clps711x/autcpu12.h
rename to arch/arm/mach-clps711x/include/mach/autcpu12.h
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 0000000..64baf9f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #CLPS7111_PHYS_BASE
+ movne \rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+ add \rx, \rx, #0x0000 @ UART1
+#else
+ add \rx, \rx, #0x1000 @ UART2
+#endif
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0480] @ UARTDR
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
+ tst \rd, #1 << 11 @ UBUSYx
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+ tst \rx, #0x1000 @ UART2 does not have CTS here
+ bne 1002f
+1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
+ tst \rd, #1 << 8 @ CTS
+ bne 1001b
+1002:
+ .endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
new file mode 100644
index 0000000..0d620e8
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/dma.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 0000000..90fa2f7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+ .macro get_irqnr_and_base, irqnr, stat, base, mask
+ mov \base, #CLPS7111_BASE
+ ldr \stat, [\base, #INTSR1]
+ ldr \mask, [\base, #INTMR1]
+ mov \irqnr, #4
+ mov \mask, \mask, lsl #16
+ and \stat, \stat, \mask, lsr #16
+ movs \stat, \stat, lsr #4
+ bne 1001f
+
+ add \base, \base, #INTSR2 - INTSR1
+ ldr \stat, [\base, #INTSR1]
+ ldr \mask, [\base, #INTMR1]
+ mov \irqnr, #16
+ mov \mask, \mask, lsl #16
+ and \stat, \stat, \mask, lsr #16
+
+1001: tst \stat, #255
+ addeq \irqnr, \irqnr, #8
+ moveq \stat, \stat, lsr #8
+ tst \stat, #15
+ addeq \irqnr, \irqnr, #4
+ moveq \stat, \stat, lsr #4
+ tst \stat, #3
+ addeq \irqnr, \irqnr, #2
+ moveq \stat, \stat, lsr #2
+ tst \stat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \stat, \stat, lsr #1
+ tst \stat, #1 @ bit 0 should be set
+ .endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 0000000..4c3e101
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,237 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ * This file contains the hardware definitions of the Prospector P720T.
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE 0xff000000
+#define CLPS7111_BASE CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors. CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE (0x00000000)
+#define CS1_PHYS_BASE (0x10000000)
+#define CS2_PHYS_BASE (0x20000000)
+#define CS3_PHYS_BASE (0x30000000)
+#define CS4_PHYS_BASE (0x40000000)
+#define CS5_PHYS_BASE (0x50000000)
+#define CS6_PHYS_BASE (0x60000000)
+#define CS7_PHYS_BASE (0x70000000)
+#else
+#define CS0_PHYS_BASE (0x70000000)
+#define CS1_PHYS_BASE (0x60000000)
+#define CS2_PHYS_BASE (0x50000000)
+#define CS3_PHYS_BASE (0x40000000)
+#define CS4_PHYS_BASE (0x30000000)
+#define CS5_PHYS_BASE (0x20000000)
+#define CS6_PHYS_BASE (0x10000000)
+#define CS7_PHYS_BASE (0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE
+#define EP7211_BASE CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE
+#define EP7212_BASE CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE 0xfe000000
+#define SYSPLD_BASE SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE IO_BASE
+
+#endif
+
+
+#if defined (CONFIG_ARCH_AUTCPU12)
+
+#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
+#define CS89712_BASE CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START 0x00000000
+#define FLASH_SIZE 0x800000
+#define FLASH_WIDTH 4
+
+#define SRAM_START 0x60000000
+#define SRAM_SIZE 0xc000
+#define SRAM_WIDTH 4
+
+#define BOOTROM_START 0x70000000
+#define BOOTROM_SIZE 0x80
+#define BOOTROM_WIDTH 4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START 0x80000000
+#define REGISTER_SIZE 0x4000
+#define REGISTER_BASE 0xff000000
+
+#define ETHER_START 0x20000000
+#define ETHER_SIZE 0x1000
+#define ETHER_BASE 0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3)
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
+#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */
+#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN (1<<1)
+#define EDB_PD2_LCDEN (1<<2)
+#define EDB_PD3_LCDBL (1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE
+#define CEIVA_BASE CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
+#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
+
+#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */
+#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */
+
+#define CEIVA_FLASH_SIZE 0x100000
+#define CEIVA_FLASH_WIDTH 2
+
+#define SRAM_START 0x60000000
+#define SRAM_SIZE 0xc000
+#define SRAM_WIDTH 4
+
+#define BOOTROM_START 0x70000000
+#define BOOTROM_SIZE 0x80
+#define BOOTROM_WIDTH 4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355 (0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST (1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN (1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL (1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN (1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN (1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 0000000..4c84400
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/io.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+/*
+ * We don't support ins[lb]/outs[lb]. Make them fault.
+ */
+#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 0000000..30b7e97
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT 4
+#define IRQ_EINT1 5
+#define IRQ_EINT2 6
+#define IRQ_EINT3 7
+#define IRQ_TC1OI 8
+#define IRQ_TC2OI 9
+#define IRQ_RTCMI 10
+#define IRQ_TINT 11
+#define IRQ_UTXINT1 12
+#define IRQ_URXINT1 13
+#define IRQ_UMSINT 14
+#define IRQ_SSEOTI 15
+
+#define INT1_IRQS (0x0000fff0)
+#define INT1_ACK_IRQS (0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT (16+0) /* bit 0 */
+#define IRQ_SS2RX (16+1) /* bit 1 */
+#define IRQ_SS2TX (16+2) /* bit 2 */
+#define IRQ_UTXINT2 (16+12) /* bit 12 */
+#define IRQ_URXINT2 (16+13) /* bit 13 */
+
+#define INT2_IRQS (0x30070000)
+#define INT2_ACK_IRQS (0x00010000)
+
+#define NR_IRQS 30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 0000000..71c2fa7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x) (x)
+#define __bus_to_virt(x) (x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x) (x)
+#define __bus_to_virt(x) (x)
+
+#else
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks. In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory. In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1). However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are
+ * incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS 24
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 0000000..f7f4c12
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ * System Control PLD register definitions.
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE (0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off) (off)
+#endif
+
+#define PLD_INT SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ (1 << 5)
+#define PLD_INT_UCB_IRQ (1 << 1)
+#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */
+
+#define PLD_PWR SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT (1 << 5)
+#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */
+#define PLD_S3_ON (1 << 2) /* LCD backlight enable */
+#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */
+#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */
+
+#define PLD_KBD SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE (1 << 1)
+#define PLD_KBD_EN (1 << 0)
+
+#define PLD_SPI SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN (1 << 0)
+
+#define PLD_IO SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */
+#define PLD_IO_USER (1 << 5) /* user defined switch */
+#define PLD_IO_LED3 (1 << 4)
+#define PLD_IO_LED2 (1 << 3)
+#define PLD_IO_LED1 (1 << 2)
+#define PLD_IO_LED0 (1 << 1)
+#define PLD_IO_LEDEN (1 << 0)
+
+#define PLD_IRDA SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN (1 << 0)
+
+#define PLD_COM2 SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN (1 << 0)
+
+#define PLD_COM1 SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN (1 << 0)
+
+#define PLD_AUD SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1 (1 << 6)
+#define PLD_AUD_DIV0 (1 << 5)
+#define PLD_AUD_CLK_SEL1 (1 << 4)
+#define PLD_AUD_CLK_SEL0 (1 << 3)
+#define PLD_AUD_MIC_PWR (1 << 2)
+#define PLD_AUD_MIC_GAIN (1 << 1)
+#define PLD_AUD_CODEC_EN (1 << 0)
+
+#define PLD_CF SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP (1 << 5)
+#define PLD_CF1_SLEEP (1 << 4)
+#define PLD_CF2_nPDREQ (1 << 3)
+#define PLD_CF1_nPDREQ (1 << 2)
+#define PLD_CF2_nIRQ (1 << 1)
+#define PLD_CF1_nIRQ (1 << 0)
+
+#define PLD_SDC SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN (1 << 2)
+#define PLD_SDC_WP (1 << 1)
+#define PLD_SDC_CD (1 << 0)
+
+#define PLD_FPGA SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3 (1 << 4)
+#define PLD_CODEC_IRQ2 (1 << 3)
+#define PLD_CODEC_IRQ1 (1 << 2)
+#define PLD_CODEC_EN (1 << 0)
+
+#define PLD_BRITE SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP (1 << 1)
+#define PLD_BRITE_DN (1 << 0)
+
+#define PLD_LCDEN SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN (1 << 0)
+
+#define PLD_ID SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ (1 << 1)
+#define PLD_TCH_EN (1 << 0)
+
+#define PLD_GPIO SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2 (1 << 2)
+#define PLD_GPIO1 (1 << 1)
+#define PLD_GPIO0 (1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 0000000..a8eade4
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/system.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 0000000..8fe283c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/time.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ do_leds();
+ do_timer(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ do_profile(regs);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+ clps711x_setup_timer();
+ timer_irq.handler = p720t_timer_interrupt;
+ setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 0000000..ac8823c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ * Prospector 720T architecture timex specifications
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 0000000..7164310
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p) (*(unsigned long *)(p))
+#define __raw_writel(v,p) (*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx SYSFLG2
+#define UARTDRx UARTDR2
+#else
+#define SYSFLGx SYSFLG1
+#define UARTDRx UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+ barrier();
+ clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+ while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+ barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
new file mode 100644
index 0000000..ea6cc7b
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index 6954a7a..38623cf 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
#include <linux/list.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 43c2fa8..a7b4591 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
#include <linux/bootmem.h>
#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index a9b9c5b..262c3c3 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 80d8fd2..f51f97d 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
#include <linux/string.h>
#include <linux/mm.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
#include "common.h"
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index d922a89..ef1fcd1 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
#include <linux/irq.h>
#include <linux/sched.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index cfd8aca..cc1b821 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
similarity index 100%
rename from include/asm-arm/arch-cl7500/acornfb.h
rename to arch/arm/mach-clps7500/include/mach/acornfb.h
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
new file mode 100644
index 0000000..af4104e
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mov \rx, #0xe0000000
+ orr \rx, \rx, #0x00010000
+ orr \rx, \rx, #0x00000be0
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
new file mode 100644
index 0000000..63fcde5
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS 0xd0000000
+
+#define DMA_S0 0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e7e541
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
new file mode 100644
index 0000000..d66578a
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+
+#define IO_START 0x03000000 /* I/O */
+#define IO_SIZE 0x01000000
+#define IO_BASE IOMEM(0xe0000000)
+
+#define ISA_START 0x0c000000 /* ISA */
+#define ISA_SIZE 0x00010000
+#define ISA_BASE 0xe1000000
+
+#define FLASH_START 0x01000000 /* XXX */
+#define FLASH_SIZE 0x01000000
+#define FLASH_BASE 0xe2000000
+
+#define LED_START 0x0302B000
+#define LED_SIZE 0x00001000
+#define LED_BASE 0xe3000000
+#define LED_ADDRESS (LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START 0x02000000 /* VRAM */
+#define SCREEN_END 0xdfc00000
+#define SCREEN_BASE 0xdf800000
+
+#define VIDC_BASE (void __iomem *)0xe0400000
+#define IOMD_BASE IOMEM(0xe0200000)
+#define IOC_BASE IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE IOMEM(0xe002a000)
+#define PCIO_BASE IOMEM(0xe0010000)
+
+#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO 0x80400000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
new file mode 100644
index 0000000..2ff2860
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/io.h
+ * from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ * 06-Dec-1997 RMK Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data. We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o) \
+ ({ \
+ unsigned int v, r = (b); \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2]" \
+ : "=r" (v) \
+ : "r" (r), "Ir" (o)); \
+ v; \
+ })
+
+#define __arch_base_getl(b,o) \
+ ({ \
+ unsigned int v, r = (b); \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2]" \
+ : "=r" (v) \
+ : "r" (r), "Ir" (o)); \
+ v; \
+ })
+
+#define __arch_base_putb(v,b,o) \
+ ({ \
+ unsigned int r = (b); \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (r), "Ir" (o)); \
+ })
+
+#define __arch_base_putl(v,b,o) \
+ ({ \
+ unsigned int r = (b); \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (r), "Ir" (o)); \
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
+ * and are translated to the start of IO. Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x) (!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "strb %1, [%0, %2, lsl #2] @ outb"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outw"
+ : "=&r" (temp)
+ : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outl"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
+static inline unsigned sz __in##fnsuffix (unsigned int port) \
+{ \
+ unsigned long temp, value; \
+ __asm__ __volatile__( \
+ "tst %2, #0x80000000\n\t" \
+ "mov %0, %4\n\t" \
+ "addeq %0, %0, %3\n\t" \
+ "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
+ : "=&r" (temp), "=r" (value) \
+ : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
+ : "cc"); \
+ return (unsigned sz)value; \
+}
+
+static inline unsigned int __ioaddr (unsigned int port) \
+{ \
+ if (__PORT_PCIO(port)) \
+ return (unsigned int)(PCIO_BASE + (port << 2)); \
+ else \
+ return (unsigned int)(IO_BASE + (port << 2)); \
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr) \
+ DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port) \
+({ \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inbc(port) \
+({ \
+ unsigned char result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __outwc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inwc(port) \
+({ \
+ unsigned short result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result & 0xffff; \
+})
+
+#define __outlc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inlc(port) \
+({ \
+ unsigned long result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __ioaddrc(port) \
+ (__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
+#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
+#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
+#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port) __ioaddr((port))
+
+#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x) (x)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
new file mode 100644
index 0000000..e8da3c5
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ * 10-10-1996 RMK Brought up to date with arch-sa110eval
+ * 22-08-1998 RMK Restructured IRQ routines
+ * 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+ if (irq == IRQ_ISA) {
+ int isabits = *((volatile unsigned int *)0xe002b700);
+ if (isabits == 0) {
+ printk("Spurious ISA IRQ!\n");
+ return irq;
+ }
+ irq = IRQ_ISA_BASE;
+ while (!(isabits & 1)) {
+ irq++;
+ isabits >>= 1;
+ }
+ }
+
+ return irq;
+}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
new file mode 100644
index 0000000..bee66b4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2 0
+#define IRQ_INT1 2
+#define IRQ_VSYNCPULSE 3
+#define IRQ_POWERON 4
+#define IRQ_TIMER0 5
+#define IRQ_TIMER1 6
+#define IRQ_FORCE 7
+#define IRQ_INT8 8
+#define IRQ_ISA 9
+#define IRQ_INT6 10
+#define IRQ_INT5 11
+#define IRQ_INT4 12
+#define IRQ_INT3 13
+#define IRQ_KEYBOARDTX 14
+#define IRQ_KEYBOARDRX 15
+
+#define IRQ_DMA0 16
+#define IRQ_DMA1 17
+#define IRQ_DMA2 18
+#define IRQ_DMA3 19
+#define IRQ_DMAS0 20
+#define IRQ_DMAS1 21
+
+#define IRQ_IOP0 24
+#define IRQ_IOP1 25
+#define IRQ_IOP2 26
+#define IRQ_IOP3 27
+#define IRQ_IOP4 28
+#define IRQ_IOP5 29
+#define IRQ_IOP6 30
+#define IRQ_IOP7 31
+
+#define IRQ_MOUSERX 40
+#define IRQ_MOUSETX 41
+#define IRQ_ADC 42
+#define IRQ_EVENT1 43
+#define IRQ_EVENT2 44
+
+#define IRQ_ISA_BASE 48
+#define IRQ_ISA_3 48
+#define IRQ_ISA_4 49
+#define IRQ_ISA_5 50
+#define IRQ_ISA_7 51
+#define IRQ_ISA_9 52
+#define IRQ_ISA_10 53
+#define IRQ_ISA_11 54
+#define IRQ_ISA_14 55
+
+#define FIQ_INT9 0
+#define FIQ_INT5 1
+#define FIQ_INT6 4
+#define FIQ_INT8 6
+#define FIQ_FORCE 7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START 64
+
+#define IRQ_TIMER IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
new file mode 100644
index 0000000..3326aa9
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ * 20-Oct-1996 RMK Created
+ * 31-Dec-1997 RMK Fixed definitions to reduce warnings
+ * 11-Jan-1998 RMK Uninlined to reduce hits on cache
+ * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
+ * 21-Mar-1999 RMK Renamed to memory.h
+ * RMK Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS 0x00000000
+#define FLUSH_BASE 0xdf000000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
new file mode 100644
index 0000000..624fc28
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+ iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode) \
+ do { \
+ iomd_writeb(0, IOMD_ROMCR0); \
+ cpu_reset(0); \
+ } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
new file mode 100644
index 0000000..dfaa9b4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE 2000000
+
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
new file mode 100644
index 0000000..d7d0af4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static inline void putc(char c)
+{
+ while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
+ barrier();
+
+ *((volatile unsigned int *)(SERBASE)) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+ int baud = 3686400 / (9600 * 32);
+
+ *((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+ *((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+ *((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+ *((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+ *((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
new file mode 100644
index 0000000..8fc5406
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 7497619..1343557 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
/* other misc. init functions */
void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 0014fb1..d46c69b 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
#include <linux/mutex.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
#include "clock.h"
/* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886..c9cb4f0 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
#include <linux/irq.h>
#include <linux/bitops.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
new file mode 100644
index 0000000..38bdd49
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-davinci/include/mach/clock.h
+ *
+ * Clock control driver for DaVinci - header file
+ *
+ * Authors: Vladimir Barinov <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
+#define __ASM_ARCH_DAVINCI_CLOCK_H
+
+struct clk;
+
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern int davinci_clk_init(void);
+
+#endif
diff --git a/include/asm-arm/arch-davinci/common.h b/arch/arm/mach-davinci/include/mach/common.h
similarity index 100%
rename from include/asm-arm/arch-davinci/common.h
rename to arch/arm/mach-davinci/include/mach/common.h
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
similarity index 100%
rename from include/asm-arm/arch-davinci/debug-macro.S
rename to arch/arm/mach-davinci/include/mach/debug-macro.S
diff --git a/include/asm-arm/arch-davinci/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-davinci/dma.h
rename to arch/arm/mach-davinci/include/mach/dma.h
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
new file mode 100644
index 0000000..039b84f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0x14]
+ mov \tmp, \tmp, lsr #2
+ sub \irqnr, \tmp, #1
+ cmp \tmp, #0
+ .endm
+
+ .macro irq_prio_table
+ .endm
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 0000000..ec151cc
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,159 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_GPIO_H
+#define __DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define GPIO(X) (X) /* 0 <= X <= 70 */
+#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
+#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+ u32 dir;
+ u32 out_data;
+ u32 set_data;
+ u32 clr_data;
+ u32 in_data;
+ u32 set_rising;
+ u32 clr_rising;
+ u32 set_falling;
+ u32 clr_falling;
+ u32 intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+ void *__iomem ptr;
+
+ if (gpio < 32)
+ ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ else if (gpio < 64)
+ ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ else if (gpio < DAVINCI_N_GPIO)
+ ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else
+ ptr = NULL;
+ return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging. Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(value)) {
+ struct gpio_controller *__iomem g;
+ u32 mask;
+
+ if (gpio >= DAVINCI_N_GPIO)
+ __error_inval_gpio();
+
+ g = __gpio_to_controller(gpio);
+ mask = __gpio_mask(gpio);
+ if (value)
+ __raw_writel(mask, &g->set_data);
+ else
+ __raw_writel(mask, &g->clr_data);
+ return;
+ }
+
+ __gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ struct gpio_controller *__iomem g;
+
+ if (!__builtin_constant_p(gpio))
+ return __gpio_get(gpio);
+
+ if (gpio >= DAVINCI_N_GPIO)
+ return __error_inval_gpio();
+
+ g = __gpio_to_controller(gpio);
+ return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif /* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
similarity index 100%
rename from include/asm-arm/arch-davinci/hardware.h
rename to arch/arm/mach-davinci/include/mach/hardware.h
diff --git a/include/asm-arm/arch-davinci/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-davinci/i2c.h
rename to arch/arm/mach-davinci/include/mach/i2c.h
diff --git a/include/asm-arm/arch-davinci/io.h b/arch/arm/mach-davinci/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-davinci/io.h
rename to arch/arm/mach-davinci/include/mach/io.h
diff --git a/include/asm-arm/arch-davinci/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
similarity index 100%
rename from include/asm-arm/arch-davinci/irqs.h
rename to arch/arm/mach-davinci/include/mach/irqs.h
diff --git a/include/asm-arm/arch-davinci/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
similarity index 100%
rename from include/asm-arm/arch-davinci/memory.h
rename to arch/arm/mach-davinci/include/mach/memory.h
diff --git a/include/asm-arm/arch-davinci/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
similarity index 100%
rename from include/asm-arm/arch-davinci/mux.h
rename to arch/arm/mach-davinci/include/mach/mux.h
diff --git a/include/asm-arm/arch-davinci/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
similarity index 100%
rename from include/asm-arm/arch-davinci/psc.h
rename to arch/arm/mach-davinci/include/mach/psc.h
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
new file mode 100644
index 0000000..fb8cb22
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <mach/io.h>
+
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
new file mode 100644
index 0000000..84ff77a
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+ davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
similarity index 100%
rename from include/asm-arm/arch-davinci/timex.h
rename to arch/arm/mach-davinci/include/mach/timex.h
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
new file mode 100644
index 0000000..8c165de
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Author: Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+ uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
new file mode 100644
index 0000000..b98bd9e
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <mach/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff..5bb66b6 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
extern void davinci_check_revision(void);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 090580e..12ca9f2 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 439bf94..8ff9d8a 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
#include <linux/io.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
/* System control register offsets */
#define PINMUX0 0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 753f0ba..720c48b 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
#include <linux/init.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
/* PSC register offsets */
#define EPCPR 0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index c2b812f..caf101e 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
#define UART_DAVINCI_PWREMU 0x0c
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 50c3b54..206e80d 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
#include <linux/spinlock.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
static struct clock_event_device clockevent_davinci;
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 31f4f21..65cc7c2 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
#include <linux/serial_8250.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
new file mode 100644
index 0000000..1dde822
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+ .macro addruart,rx
+ mov \rx, #0xf0000000
+ orr \rx, \rx, #0x00000be0
+ .endm
+
+#define UART_SHIFT 2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
new file mode 100644
index 0000000..780a04c
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/dma.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EBSA110 DMA definitions
+ */
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
new file mode 100644
index 0000000..cc3e599
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT 0xff000000 /* read */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #IRQ_STAT
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, stat, base, tmp
+ ldrb \stat, [\base] @ get interrupts
+ mov \irqnr, #0
+ tst \stat, #15
+ addeq \irqnr, \irqnr, #4
+ moveq \stat, \stat, lsr #4
+ tst \stat, #3
+ addeq \irqnr, \irqnr, #2
+ moveq \stat, \stat, lsr #2
+ tst \stat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \stat, \stat, lsr #1
+ tst \stat, #1 @ bit 0 should be set
+ .endm
+
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
new file mode 100644
index 0000000..4b2fb77
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region IO region
+ * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
+ * f0000e60 - f0000e64 398 - 399
+ * f0000de0 - f0000dfc 378 - 37f lp0
+ * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region IO region
+ * f00014f1 a79 pnp write data
+ * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
+ * f00004f1 279 pnp address
+ * f0000440 - f000046c 220 - 236 eth0
+ * f0000405 203 pnp read data
+ */
+
+#define ISAMEM_PHYS 0xe0000000
+#define ISAMEM_SIZE 0x10000000
+
+#define ISAIO_PHYS 0xf0000000
+#define ISAIO_SIZE PGDIR_SIZE
+
+#define TRICK0_PHYS 0xf2000000
+#define TRICK1_PHYS 0xf2400000
+#define TRICK2_PHYS 0xf2800000
+#define TRICK3_PHYS 0xf2c00000
+#define TRICK4_PHYS 0xf3000000
+#define TRICK5_PHYS 0xf3400000
+#define TRICK6_PHYS 0xf3800000
+#define TRICK7_PHYS 0xf3c00000
+
+#define ISAMEM_BASE 0xe0000000
+#define ISAIO_BASE 0xf0000000
+
+#define PIT_BASE 0xfc000000
+#define SOFT_BASE 0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
+
+#endif
+
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
new file mode 100644
index 0000000..f68daa63
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 06-Dec-1997 RMK Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8 val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8 val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8 __readb(const volatile void __iomem *addr);
+u16 __readw(const volatile void __iomem *addr);
+u32 __readl(const volatile void __iomem *addr);
+
+void __writeb(u8 val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line. We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) __inb16(p)
+#define outb(v,p) __outb16(v,p)
+#else
+#define inb(p) __inb8(p)
+#define outb(v,p) __outb8(v,p)
+#endif
+
+#define inw(p) __inw(p)
+#define outw(v,p) __outw(v,p)
+
+#define inl(p) __inl(p)
+#define outl(v,p) __outl(v,p)
+
+#define readb(b) __readb(b)
+#define readw(b) __readw(b)
+#define readl(b) __readl(b)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(v,b) __writeb(v,b)
+#define writew(v,b) __writew(v,b)
+#define writel(v,b) __writel(v,b)
+
+static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
+ unsigned int flags)
+{
+ return (void __iomem *)cookie;
+}
+
+#define __arch_ioremap __arch_ioremap
+#define __arch_iounmap(cookie) do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+/* can't support writesb atm */
+extern void writesw(void __iomem *addr, const void *data, int wordlen);
+extern void writesl(void __iomem *addr, const void *data, int longlen);
+
+/* can't support readsb atm */
+extern void readsw(const void __iomem *addr, void *data, int wordlen);
+extern void readsl(const void __iomem *addr, void *data, int longlen);
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
new file mode 100644
index 0000000..a8f3771
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS 8
+
+#define IRQ_EBSA110_PRINTER 0
+#define IRQ_EBSA110_COM1 1
+#define IRQ_EBSA110_COM2 2
+#define IRQ_EBSA110_ETHERNET 3
+#define IRQ_EBSA110_TIMER0 4
+#define IRQ_EBSA110_TIMER1 5
+#define IRQ_EBSA110_PCMCIA 6
+#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
new file mode 100644
index 0000000..eea4b75
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 20-Oct-1996 RMK Created
+ * 31-Dec-1997 RMK Fixed definitions to reduce warnings
+ * 21-Mar-1999 RMK Renamed to memory.h
+ * RMK Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x) (x)
+#define __bus_to_virt(x) (x)
+
+/*
+ * Cache flushing area - SRAM
+ */
+#define FLUSH_BASE_PHYS 0x40000000
+#define FLUSH_BASE 0xdf000000
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
new file mode 100644
index 0000000..350a028
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/system.h
+ *
+ * Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+ const char *irq_stat = (char *)0xff000000;
+
+ /* disable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+ /* wait for an interrupt to occur */
+ while (!*irq_stat);
+
+ /* enable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode) cpu_reset(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
new file mode 100644
index 0000000..4fb43b2
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/timex.h
+ *
+ * Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE 47894000
+
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
new file mode 100644
index 0000000..3204150
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/uncompress.h
+ *
+ * Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define SERIAL_BASE ((unsigned char *)0xf0000be0)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ unsigned char v, *base = SERIAL_BASE;
+
+ do {
+ v = base[UART_LSR << 2];
+ barrier();
+ } while (!(v & UART_LSR_THRE));
+
+ base[UART_TX << 2] = c;
+}
+
+static inline void flush(void)
+{
+ unsigned char v, *base = SERIAL_BASE;
+
+ do {
+ v = base[UART_LSR << 2];
+ barrier();
+ } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
+ (UART_LSR_TEMT|UART_LSR_THRE));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
new file mode 100644
index 0000000..9b44c19
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/vmalloc.h
+ *
+ * Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x1f000000)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index a2027ad..53748f5 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index b16d016..6a6ea57 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 8f87f8a..aa1fb35 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 4642c70..6062e47 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/string.h>
#include <asm/div64.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b49da11..f99f436 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 1650ec7..97550c0 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 00208ce..99b01d4 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index 78d04ae..9fb72d0 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index d658fb2..87267a5 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 4fd1cd6..7e37395 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 44dacba..08a7c9b 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index cc80031..9b41ec1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c0..0f3fb87 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
#include <linux/module.h>
#include <linux/seq_file.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
#include <asm/io.h>
#include <asm/gpio.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..802858b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
+ ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
+ orr \rx, \rx, #0x000c0000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 0000000..d0fa965
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..96b85e2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(EP93XX_AHB_VIRT_BASE)
+ orr \base, \base, #0x000b0000
+ mov \irqnr, #0
+ ldr \irqstat, [\base] @ lower 32 interrupts
+ cmp \irqstat, #0
+ bne 1001f
+
+ eor \base, \base, #0x00070000
+ ldr \irqstat, [\base] @ upper 32 interrupts
+ cmp \irqstat, #0
+ beq 1002f
+ mov \irqnr, #0x20
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+
+1002:
+ .endm
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
new file mode 100644
index 0000000..9f4458c
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt phys size
+ * fe800000 5M per-platform mappings
+ * fed00000 80800000 2M APB
+ * fef00000 80000000 1M AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE 0x80000000
+#define EP93XX_AHB_VIRT_BASE 0xfef00000
+#define EP93XX_AHB_SIZE 0x00100000
+
+#define EP93XX_APB_PHYS_BASE 0x80800000
+#define EP93XX_APB_VIRT_BASE 0xfed00000
+#define EP93XX_APB_SIZE 0x00200000
+
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
+
+#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+
+#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+
+#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
+
+#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
+
+#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+
+#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+
+#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+
+#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+
+#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
+
+#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+
+#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
+
+#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+
+#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
+#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
+
+#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 0000000..21fe2b9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
new file mode 100644
index 0000000..f702041
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* GPIO port A. */
+#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B. */
+#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C. */
+#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D. */
+#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
+#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E. */
+#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F. */
+#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G. */
+#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H. */
+#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
+#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+ if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+ return 64 + gpio;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - gpio_to_irq(0);
+}
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
new file mode 100644
index 0000000..529807d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses() 0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
new file mode 100644
index 0000000..1ab9a90
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/io.h
+ */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p) ((void __iomem *)(p))
+#define __mem_pci(p) (p)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
new file mode 100644
index 0000000..ff98390
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX 2
+#define IRQ_EP93XX_COMMTX 3
+#define IRQ_EP93XX_TIMER1 4
+#define IRQ_EP93XX_TIMER2 5
+#define IRQ_EP93XX_AACINTR 6
+#define IRQ_EP93XX_DMAM2P0 7
+#define IRQ_EP93XX_DMAM2P1 8
+#define IRQ_EP93XX_DMAM2P2 9
+#define IRQ_EP93XX_DMAM2P3 10
+#define IRQ_EP93XX_DMAM2P4 11
+#define IRQ_EP93XX_DMAM2P5 12
+#define IRQ_EP93XX_DMAM2P6 13
+#define IRQ_EP93XX_DMAM2P7 14
+#define IRQ_EP93XX_DMAM2P8 15
+#define IRQ_EP93XX_DMAM2P9 16
+#define IRQ_EP93XX_DMAM2M0 17
+#define IRQ_EP93XX_DMAM2M1 18
+#define IRQ_EP93XX_GPIO0MUX 19
+#define IRQ_EP93XX_GPIO1MUX 20
+#define IRQ_EP93XX_GPIO2MUX 21
+#define IRQ_EP93XX_GPIO3MUX 22
+#define IRQ_EP93XX_UART1RX 23
+#define IRQ_EP93XX_UART1TX 24
+#define IRQ_EP93XX_UART2RX 25
+#define IRQ_EP93XX_UART2TX 26
+#define IRQ_EP93XX_UART3RX 27
+#define IRQ_EP93XX_UART3TX 28
+#define IRQ_EP93XX_KEY 29
+#define IRQ_EP93XX_TOUCH 30
+#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
+
+#define IRQ_EP93XX_EXT0 32
+#define IRQ_EP93XX_EXT1 33
+#define IRQ_EP93XX_EXT2 34
+#define IRQ_EP93XX_64HZ 35
+#define IRQ_EP93XX_WATCHDOG 36
+#define IRQ_EP93XX_RTC 37
+#define IRQ_EP93XX_IRDA 38
+#define IRQ_EP93XX_ETHERNET 39
+#define IRQ_EP93XX_EXT3 40
+#define IRQ_EP93XX_PROG 41
+#define IRQ_EP93XX_1HZ 42
+#define IRQ_EP93XX_VSYNC 43
+#define IRQ_EP93XX_VIDEO_FIFO 44
+#define IRQ_EP93XX_SSP1RX 45
+#define IRQ_EP93XX_SSP1TX 46
+#define IRQ_EP93XX_GPIO4MUX 47
+#define IRQ_EP93XX_GPIO5MUX 48
+#define IRQ_EP93XX_GPIO6MUX 49
+#define IRQ_EP93XX_GPIO7MUX 50
+#define IRQ_EP93XX_TIMER3 51
+#define IRQ_EP93XX_UART1 52
+#define IRQ_EP93XX_SSP 53
+#define IRQ_EP93XX_UART2 54
+#define IRQ_EP93XX_UART3 55
+#define IRQ_EP93XX_USB 56
+#define IRQ_EP93XX_ETHERNET_PME 57
+#define IRQ_EP93XX_DSP 58
+#define IRQ_EP93XX_GPIO_AB 59
+#define IRQ_EP93XX_SAI 60
+#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
+
+#define NR_EP93XX_IRQS (64 + 24)
+
+#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS 32
+
+#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
new file mode 100644
index 0000000..f1b6335
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __bus_to_virt(x) __phys_to_virt(x)
+#define __virt_to_bus(x) __virt_to_phys(x)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
new file mode 100644
index 0000000..b5c1824
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+struct ep93xx_eth_data
+{
+ unsigned char dev_addr[6];
+ unsigned char phy_id;
+};
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
new file mode 100644
index 0000000..67789d0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/system.h
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ u32 devicecfg;
+
+ local_irq_disable();
+
+ devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 0000000..6b3503b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE 983040
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
new file mode 100644
index 0000000..30b318a
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt phys size
+ * febff000 22000000 4K model number register
+ * febfe000 22400000 4K options register
+ * febfd000 22800000 4K options register #2
+ * febfc000 [67]0000000 4K NAND data register
+ * febfb000 [67]0400000 4K NAND control register
+ * febfa000 [67]0800000 4K NAND busy register
+ * febf9000 10800000 4K TS-5620 RTC index register
+ * febf8000 11700000 4K TS-5620 RTC data register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE 0x22000000
+#define TS72XX_MODEL_VIRT_BASE 0xfebff000
+#define TS72XX_MODEL_SIZE 0x00001000
+
+#define TS72XX_MODEL_TS7200 0x00
+#define TS72XX_MODEL_TS7250 0x01
+#define TS72XX_MODEL_TS7260 0x02
+
+
+#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
+#define TS72XX_OPTIONS_SIZE 0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485 0x02
+#define TS72XX_OPTIONS_MAX197 0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
+#define TS72XX_OPTIONS2_SIZE 0x00001000
+
+#define TS72XX_OPTIONS2_TS9420 0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
+
+
+#define TS72XX_NOR_PHYS_BASE 0x60000000
+#define TS72XX_NOR2_PHYS_BASE 0x62000000
+
+#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
+#define TS72XX_NAND_DATA_SIZE 0x00001000
+
+#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE 0x00001000
+
+#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE 0x00001000
+
+
+#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000
+#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000
+#define TS72XX_RTC_INDEX_SIZE 0x00001000
+
+#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000
+#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000
+#define TS72XX_RTC_DATA_SIZE 0x00001000
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline int board_is_ts7200(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+
+static inline int is_max197_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+ TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+ TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
new file mode 100644
index 0000000..1fd2f17
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <mach/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+ return *((volatile unsigned char *)ptr);
+}
+
+static unsigned int __raw_readl(unsigned int ptr)
+{
+ return *((volatile unsigned int *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+ *((volatile unsigned char *)ptr) = value;
+}
+
+static void __raw_writel(unsigned int value, unsigned int ptr)
+{
+ *((volatile unsigned int *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA 0x808c0000
+#define PHYS_UART1_FLAG 0x808c0018
+#define UART1_FLAG_TXFF 0x20
+
+static inline void putc(int c)
+{
+ int i;
+
+ for (i = 0; i < 1000; i++) {
+ /* Transmit fifo not full? */
+ if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+ break;
+ }
+
+ __raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL 0x80010020
+#define ETH_SELF_CTL_RESET 0x00000001
+
+static void ethernet_reset(void)
+{
+ unsigned int v;
+
+ /* Reset the ethernet MAC. */
+ v = __raw_readl(PHYS_ETH_SELF_CTL);
+ __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+ /* Wait for reset to finish. */
+ while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+ ;
+}
+
+
+static void arch_decomp_setup(void)
+{
+ ethernet_reset();
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..aed21cd
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 4d831ba..de047a5 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
#include <linux/mtd/physmap.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c0bc642..c3cbff1 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
#include <linux/platform_device.h>
#include <linux/m48t86.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index c04c46c..4e10090 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
new file mode 100644
index 0000000..4329b81
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -0,0 +1,57 @@
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+ /* For NetWinder debugging */
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x7c000000 @ physical
+ movne \rx, #0xff000000 @ virtual
+ orr \rx, \rx, #0x000003f8
+ .endm
+
+#define UART_SHIFT 0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
+
+#else
+ /* For EBSA285 debugging */
+ .equ dc21285_high, ARMCSR_BASE & 0xff000000
+ .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x42000000
+ movne \rx, #dc21285_high
+ .if dc21285_low
+ orrne \rx, \rx, #dc21285_low
+ .endif
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x160] @ UARTDR
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x178] @ UARTFLG
+ tst \rd, #1 << 3
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
new file mode 100644
index 0000000..62afd21
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/dma.h
+ *
+ * Architecture DMA routines
+ *
+ * Copyright (C) 1998,1999 Russell King
+ * Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x) (0+(x))
+#define _DC21285_DMA(x) (8+(x))
+
+#define MAX_DMA_CHANNELS 10
+
+#define DMA_FLOPPY _ISA_DMA(2)
+#define DMA_ISA_CASCADE _ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
new file mode 100644
index 0000000..d3847be
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+ .equ dc21285_high, ARMCSR_BASE & 0xff000000
+ .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #dc21285_high
+ .if dc21285_low
+ orr \base, \base, #dc21285_low
+ .endif
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #0x180] @ get interrupts
+
+ mov \irqnr, #IRQ_SDRAMPARITY
+ tst \irqstat, #IRQ_MASK_SDRAMPARITY
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_UART_RX
+ movne \irqnr, #IRQ_CONRX
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_DMA1
+ movne \irqnr, #IRQ_DMA1
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_DMA2
+ movne \irqnr, #IRQ_DMA2
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_IN0
+ movne \irqnr, #IRQ_IN0
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_IN1
+ movne \irqnr, #IRQ_IN1
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_IN2
+ movne \irqnr, #IRQ_IN2
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_IN3
+ movne \irqnr, #IRQ_IN3
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_PCI
+ movne \irqnr, #IRQ_PCI
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_DOORBELLHOST
+ movne \irqnr, #IRQ_DOORBELLHOST
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_I2OINPOST
+ movne \irqnr, #IRQ_I2OINPOST
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_TIMER1
+ movne \irqnr, #IRQ_TIMER1
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_TIMER2
+ movne \irqnr, #IRQ_TIMER2
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_TIMER3
+ movne \irqnr, #IRQ_TIMER3
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_UART_TX
+ movne \irqnr, #IRQ_CONTX
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_PCI_ABORT
+ movne \irqnr, #IRQ_PCI_ABORT
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_PCI_SERR
+ movne \irqnr, #IRQ_PCI_SERR
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_DISCARD_TIMER
+ movne \irqnr, #IRQ_DISCARD_TIMER
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_PCI_DPERR
+ movne \irqnr, #IRQ_PCI_DPERR
+ bne 1001f
+
+ tst \irqstat, #IRQ_MASK_PCI_PERR
+ movne \irqnr, #IRQ_PCI_PERR
+1001:
+ .endm
+
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 0000000..ffaea90
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ * Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/* Virtual Physical Size
+ * 0xff800000 0x40000000 1MB X-Bus
+ * 0xff000000 0x7c000000 1MB PCI I/O space
+ * 0xfe000000 0x42000000 1MB CSR
+ * 0xfd000000 0x78000000 1MB Outbound write flush (not supported)
+ * 0xfc000000 0x79000000 1MB PCI IACK/special space
+ * 0xfb000000 0x7a000000 16MB PCI Config type 1
+ * 0xfa000000 0x7b000000 16MB PCI Config type 0
+ * 0xf9000000 0x50000000 1MB Cache flush
+ * 0xf0000000 0x80000000 16MB ISA memory
+ */
+#define XBUS_SIZE 0x00100000
+#define XBUS_BASE 0xff800000
+
+#define PCIO_SIZE 0x00100000
+#define PCIO_BASE 0xff000000
+
+#define ARMCSR_SIZE 0x00100000
+#define ARMCSR_BASE 0xfe000000
+
+#define WFLUSH_SIZE 0x00100000
+#define WFLUSH_BASE 0xfd000000
+
+#define PCIIACK_SIZE 0x00100000
+#define PCIIACK_BASE 0xfc000000
+
+#define PCICFG1_SIZE 0x01000000
+#define PCICFG1_BASE 0xfb000000
+
+#define PCICFG0_SIZE 0x01000000
+#define PCICFG0_BASE 0xfa000000
+
+#define PCIMEM_SIZE 0x01000000
+#define PCIMEM_BASE 0xf0000000
+
+#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER (1 << 0)
+#define XBUS_LED_GREEN (1 << 1)
+#define XBUS_LED_RED (1 << 2)
+#define XBUS_LED_TOGGLE (1 << 8)
+
+#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO 0x20
+#define PIC_MASK_LO 0x21
+#define PIC_HI 0xA0
+#define PIC_MASK_HI 0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK 0x800
+#define GPIO_DSCLK 0x400
+#define GPIO_E2CLK 0x200
+#define GPIO_IOLOAD 0x100
+#define GPIO_RED_LED 0x080
+#define GPIO_WDTIMER 0x040
+#define GPIO_DATA 0x020
+#define GPIO_IOCLK 0x010
+#define GPIO_DONE 0x008
+#define GPIO_FAN 0x004
+#define GPIO_GREEN_LED 0x002
+#define GPIO_RESET 0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE 8
+#define CPLD_7111_DISABLE 4
+#define CPLD_UNMUTE 2
+#define CPLD_FLASH_WR_ENABLE 1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x81000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
new file mode 100644
index 0000000..a7b0662
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a) (a)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+ unsigned long a = (unsigned long)p;
+ BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+ return p;
+}
+
+#define __mem_pci(a) ___mem_pci(a)
+#endif
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
new file mode 100644
index 0000000..400551e
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder
+ * 01-Feb-1999 PJB ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS 36
+#define NR_DC21285_IRQS 16
+
+#define _ISA_IRQ(x) (0 + (x))
+#define _ISA_INR(x) ((x) - 0)
+#define _DC21285_IRQ(x) (16 + (x))
+#define _DC21285_INR(x) ((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX _DC21285_IRQ(0)
+#define IRQ_CONTX _DC21285_IRQ(1)
+#define IRQ_TIMER1 _DC21285_IRQ(2)
+#define IRQ_TIMER2 _DC21285_IRQ(3)
+#define IRQ_TIMER3 _DC21285_IRQ(4)
+#define IRQ_IN0 _DC21285_IRQ(5)
+#define IRQ_IN1 _DC21285_IRQ(6)
+#define IRQ_IN2 _DC21285_IRQ(7)
+#define IRQ_IN3 _DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST _DC21285_IRQ(9)
+#define IRQ_DMA1 _DC21285_IRQ(10)
+#define IRQ_DMA2 _DC21285_IRQ(11)
+#define IRQ_PCI _DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY _DC21285_IRQ(13)
+#define IRQ_I2OINPOST _DC21285_IRQ(14)
+#define IRQ_PCI_ABORT _DC21285_IRQ(15)
+#define IRQ_PCI_SERR _DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER _DC21285_IRQ(17)
+#define IRQ_PCI_DPERR _DC21285_IRQ(18)
+#define IRQ_PCI_PERR _DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER _ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD _ISA_IRQ(1)
+#define IRQ_ISA_CASCADE _ISA_IRQ(2)
+#define IRQ_ISA_UART2 _ISA_IRQ(3)
+#define IRQ_ISA_UART _ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY _ISA_IRQ(6)
+#define IRQ_ISA_PRINTER _ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM _ISA_IRQ(8)
+#define IRQ_ISA_2 _ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE _ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1 _ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2 _ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX (1 << 2)
+#define IRQ_MASK_UART_TX (1 << 3)
+#define IRQ_MASK_TIMER1 (1 << 4)
+#define IRQ_MASK_TIMER2 (1 << 5)
+#define IRQ_MASK_TIMER3 (1 << 6)
+#define IRQ_MASK_IN0 (1 << 8)
+#define IRQ_MASK_IN1 (1 << 9)
+#define IRQ_MASK_IN2 (1 << 10)
+#define IRQ_MASK_IN3 (1 << 11)
+#define IRQ_MASK_DOORBELLHOST (1 << 15)
+#define IRQ_MASK_DMA1 (1 << 16)
+#define IRQ_MASK_DMA2 (1 << 17)
+#define IRQ_MASK_PCI (1 << 18)
+#define IRQ_MASK_SDRAMPARITY (1 << 24)
+#define IRQ_MASK_I2OINPOST (1 << 25)
+#define IRQ_MASK_PCI_ABORT ((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR (1 << 23)
+#define IRQ_MASK_DISCARD_TIMER (1 << 27)
+#define IRQ_MASK_PCI_DPERR (1 << 28)
+#define IRQ_MASK_PCI_PERR (1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10 IRQ_IN0
+#define IRQ_NETWINDER_ETHER100 IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE _ISA_IRQ(5)
+#define IRQ_NETWINDER_IR _ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON _ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA _ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND _ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
new file mode 100644
index 0000000..e9cae99
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/memory.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 20-Oct-1996 RMK Created
+ * 31-Dec-1997 RMK Fixed definitions to reduce warnings.
+ * 17-May-1998 DAG Added __virt_to_bus and __bus_to_virt functions.
+ * 21-Nov-1998 RMK Changed __virt_to_bus and __bus_to_virt to macros.
+ * 21-Mar-1999 RMK Added PAGE_OFFSET for co285 architecture.
+ * Renamed to memory.h
+ * Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x) ((x) - 0xe0000000)
+#define __bus_to_virt(x) ((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE UL(0xbf000000)
+#define PAGE_OFFSET UL(0xc0000000)
+
+/*
+ * Cache flushing area.
+ */
+#define FLUSH_BASE 0xf9000000
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#define FLUSH_BASE_PHYS 0x50000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
new file mode 100644
index 0000000..01c9f40
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/system.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ if (mode == 's') {
+ /*
+ * Jump into the ROM
+ */
+ cpu_reset(0x41000000);
+ } else {
+ if (machine_is_netwinder()) {
+ /* open up the SuperIO chip
+ */
+ outb(0x87, 0x370);
+ outb(0x87, 0x370);
+
+ /* aux function group 1 (logical device 7)
+ */
+ outb(0x07, 0x370);
+ outb(0x07, 0x371);
+
+ /* set GP16 for WD-TIMER output
+ */
+ outb(0xe6, 0x370);
+ outb(0x00, 0x371);
+
+ /* set a RED LED and toggle WD_TIMER for rebooting
+ */
+ outb(0xc4, 0x338);
+ } else {
+ /*
+ * Force the watchdog to do a CPU reset.
+ *
+ * After making sure that the watchdog is disabled
+ * (so we can change the timer registers) we first
+ * enable the timer to autoreload itself. Next, the
+ * timer interval is set really short and any
+ * current interrupt request is cleared (so we can
+ * see an edge transition). Finally, TIMER4 is
+ * enabled as the watchdog.
+ */
+ *CSR_SA110_CNTL &= ~(1 << 13);
+ *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+ TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ *CSR_TIMER4_LOAD = 0x2;
+ *CSR_TIMER4_CLR = 0;
+ *CSR_SA110_CNTL |= (1 << 13);
+ }
+ }
+}
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
new file mode 100644
index 0000000..d0fea9d
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/timex.h
+ *
+ * Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE (50000000/16)
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
new file mode 100644
index 0000000..5dfa442
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ *
+ * Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE ((volatile unsigned char *)0x7c0003f8)
+
+static inline void putc(char c)
+{
+ if (machine_is_netwinder()) {
+ while ((SER0_BASE[5] & 0x60) != 0x60)
+ barrier();
+ SER0_BASE[0] = c;
+ } else {
+ while (DC21285_BASE[6] & 8);
+ DC21285_BASE[0] = c;
+ }
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
new file mode 100644
index 0000000..d0958d8
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index b8e53d6..7132e52 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/dec21285.h>
#include <asm/irq.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 2a2fbff..d91a4f4 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index bffba25..fd9a7c1 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-ebsa285/time.h
+ * arch/arm/mach-footbridge/include/mach/time.h
*
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
#include <linux/mc146818rtc.h>
#include <linux/bcd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 26aefae..b5f9741 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
#include <asm/pgtable.h>
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/mach/dma.h>
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index cd51520b..24df2a3 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 22573fc..53e1f62 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 899f935..78be457 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "common.h"
MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index eb725bd..56161d5 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "common.h"
static struct resource cirrus_resources[] = {
diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
new file mode 100644
index 0000000..079b279
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-h720x/include/mach/boards.h
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the board specific defines for various devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
+#error Do not include this file directly. Include asm/hardware.h instead !
+#endif
+
+/* Hynix H7202 developer board specific device defines */
+#ifdef CONFIG_ARCH_H7202
+
+/* FLASH */
+#define FLASH_VIRT 0xd0000000
+#define FLASH_PHYS 0x00000000
+#define FLASH_SIZE 0x02000000
+
+/* onboard LAN controller */
+# define ETH0_PHYS 0x08000000
+
+/* Touch screen defines */
+/* GPIO Port */
+#define PEN_GPIO GPIO_B_VIRT
+/* Bitmask for pen down interrupt */
+#define PEN_INT_BIT (1<<7)
+/* Bitmask for pen up interrupt */
+#define PEN_ENA_BIT (1<<6)
+/* pen up interrupt */
+#define IRQ_PEN IRQ_MUX_GPIOB(7)
+
+#endif
+
+/* Hynix H7201 developer board specific device defines */
+#if defined (CONFIG_ARCH_H7201)
+/* ROM DISK SPACE */
+#define ROM_DISK_BASE 0xc1800000
+#define ROM_DISK_START 0x41800000
+#define ROM_DISK_SIZE 0x00700000
+
+/* SRAM DISK SPACE */
+#define SRAM_DISK_BASE 0xf1000000
+#define SRAM_DISK_START 0x04000000
+#define SRAM_DISK_SIZE 0x00400000
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
new file mode 100644
index 0000000..6294a13
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .equ io_virt, IO_BASE
+ .equ io_phys, IO_START
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #io_phys @ physical base address
+ movne \rx, #io_virt @ virtual address
+ add \rx, \rx, #0x00020000 @ UART1
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0] @ UARTDR
+
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
new file mode 100644
index 0000000..0a9d86e
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-h720x/include/mach/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS 0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS 3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS 4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d3b917
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+ @ we could use the id register on H7202, but this is not
+ @ properly updated when we come back from asm_do_irq
+ @ without a previous return from interrupt
+ @ (see loops below in irq_svc, irq_usr)
+ @ We see unmasked pending ints only, as the masked pending ints
+ @ are not visible here
+
+ mov \base, #0xf0000000 @ base register
+ orr \base, \base, #0x24000 @ irqbase
+ ldr \irqstat, [\base, #0x04] @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+ ldr \tmp, =0x001fffff
+#else
+ mvn \tmp, #0xc0000000
+#endif
+ and \irqstat, \irqstat, \tmp @ mask out unused ints
+ mov \irqnr, #0
+
+ mov \tmp, #0xff00
+ orr \tmp, \tmp, #0xff
+ tst \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+ moveq \irqstat, \irqstat, lsr #16
+ tst \irqstat, #255
+ addeq \irqnr, \irqnr, #8
+ moveq \irqstat, \irqstat, lsr #8
+ tst \irqstat, #15
+ addeq \irqnr, \irqnr, #4
+ moveq \irqstat, \irqstat, lsr #4
+ tst \irqstat, #3
+ addeq \irqnr, \irqnr, #2
+ moveq \irqstat, \irqstat, lsr #2
+ tst \irqstat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \irqstat, \irqstat, lsr #1
+ tst \irqstat, #1 @ bit 0 should be set
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
new file mode 100644
index 0000000..611b494
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_VIRT (IO_VIRT + 0x50100)
+#define SERIAL3_VIRT (IO_VIRT + 0x50200)
+
+/*
+ * PCMCIA
+ */
+#define PCMCIA0_ATT_BASE 0xe5000000
+#define PCMCIA0_ATT_SIZE 0x00200000
+#define PCMCIA0_ATT_START 0x20000000
+#define PCMCIA0_MEM_BASE 0xe5200000
+#define PCMCIA0_MEM_SIZE 0x00200000
+#define PCMCIA0_MEM_START 0x24000000
+#define PCMCIA0_IO_BASE 0xe5400000
+#define PCMCIA0_IO_SIZE 0x00200000
+#define PCMCIA0_IO_START 0x28000000
+
+#define PCMCIA1_ATT_BASE 0xe5600000
+#define PCMCIA1_ATT_SIZE 0x00200000
+#define PCMCIA1_ATT_START 0x30000000
+#define PCMCIA1_MEM_BASE 0xe5800000
+#define PCMCIA1_MEM_SIZE 0x00200000
+#define PCMCIA1_MEM_START 0x34000000
+#define PCMCIA1_IO_BASE 0xe5a00000
+#define PCMCIA1_IO_SIZE 0x00200000
+#define PCMCIA1_IO_START 0x38000000
+
+#define PRIME3C_BASE 0xf0050000
+#define PRIME3C_SIZE 0x00001000
+#define PRIME3C_START 0x10000000
+
+/* VGA Controller */
+#define VGA_RAMBASE 0x50
+#define VGA_TIMING0 0x60
+#define VGA_TIMING1 0x64
+#define VGA_TIMING2 0x68
+#define VGA_TIMING3 0x6c
+
+#define LCD_CTRL_VGA_ENABLE 0x00000100
+#define LCD_CTRL_VGA_BPP_MASK 0x00000600
+#define LCD_CTRL_VGA_4BPP 0x00000000
+#define LCD_CTRL_VGA_8BPP 0x00000200
+#define LCD_CTRL_VGA_16BPP 0x00000300
+#define LCD_CTRL_SHARE_DMA 0x00000800
+#define LCD_CTRL_VDE 0x00100000
+#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */
+#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */
+
+#define VGA_PALETTE_BASE (IO_VIRT + 0x10800)
diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
new file mode 100644
index 0000000..17c12eb
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_OFS 0x2d000
+#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS)
+#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS)
+#define SERIAL3_OFS 0x2e000
+#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS)
+#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS)
+
+/* Matrix Keyboard Controller */
+#define KBD_VIRT (IO_VIRT + 0x22000)
+#define KBD_KBCR 0x00
+#define KBD_KBSC 0x04
+#define KBD_KBTR 0x08
+#define KBD_KBVR0 0x0C
+#define KBD_KBVR1 0x10
+#define KBD_KBSR 0x18
+
+#define KBD_KBCR_SCANENABLE (1 << 7)
+#define KBD_KBCR_NPOWERDOWN (1 << 2)
+#define KBD_KBCR_CLKSEL_MASK (3)
+#define KBD_KBCR_CLKSEL_PCLK2 0x0
+#define KBD_KBCR_CLKSEL_PCLK128 0x1
+#define KBD_KBCR_CLKSEL_PCLK256 0x2
+#define KBD_KBCR_CLKSEL_PCLK512 0x3
+
+#define KBD_KBSR_INTR (1 << 0)
+#define KBD_KBSR_WAKEUP (1 << 1)
+
+/* USB device controller */
+
+#define USBD_BASE (IO_VIRT + 0x12000)
+#define USBD_LENGTH 0x3C
+
+#define USBD_GCTRL 0x00
+#define USBD_EPCTRL 0x04
+#define USBD_INTMASK 0x08
+#define USBD_INTSTAT 0x0C
+#define USBD_PWR 0x10
+#define USBD_DMARXTX 0x14
+#define USBD_DEVID 0x18
+#define USBD_DEVCLASS 0x1C
+#define USBD_INTCLASS 0x20
+#define USBD_SETUP0 0x24
+#define USBD_SETUP1 0x28
+#define USBD_ENDP0RD 0x2C
+#define USBD_ENDP0WT 0x30
+#define USBD_ENDP1RD 0x34
+#define USBD_ENDP2WT 0x38
+
+/* PS/2 port */
+#define PSDATA 0x00
+#define PSSTAT 0x04
+#define PSSTAT_TXEMPTY (1<<0)
+#define PSSTAT_TXBUSY (1<<1)
+#define PSSTAT_RXFULL (1<<2)
+#define PSSTAT_RXBUSY (1<<3)
+#define PSSTAT_CLKIN (1<<4)
+#define PSSTAT_DATAIN (1<<5)
+#define PSSTAT_PARITY (1<<6)
+
+#define PSCONF 0x08
+#define PSCONF_ENABLE (1<<0)
+#define PSCONF_TXINTEN (1<<2)
+#define PSCONF_RXINTEN (1<<3)
+#define PSCONF_FORCECLKLOW (1<<4)
+#define PSCONF_FORCEDATLOW (1<<5)
+#define PSCONF_LCE (1<<6)
+
+#define PSINTR 0x0C
+#define PSINTR_TXINT (1<<0)
+#define PSINTR_RXINT (1<<1)
+#define PSINTR_PAR (1<<2)
+#define PSINTR_RXTO (1<<3)
+#define PSINTR_TXTO (1<<4)
+
+#define PSTDLO 0x10 /* clk low before start transmission */
+#define PSTPRI 0x14 /* PRI clock */
+#define PSTXMT 0x18 /* maximum transmission time */
+#define PSTREC 0x20 /* maximum receive time */
+#define PSPWDN 0x3c
+
+/* ADC converter */
+#define ADC_BASE (IO_VIRT + 0x29000)
+#define ADC_CR 0x00
+#define ADC_TSCTRL 0x04
+#define ADC_BT_CTRL 0x08
+#define ADC_MC_CTRL 0x0C
+#define ADC_STATUS 0x10
+
+/* ADC control register bits */
+#define ADC_CR_PW_CTRL 0x80
+#define ADC_CR_DIRECTC 0x04
+#define ADC_CR_CONTIME_NO 0x00
+#define ADC_CR_CONTIME_2 0x04
+#define ADC_CR_CONTIME_4 0x08
+#define ADC_CR_CONTIME_ADE 0x0c
+#define ADC_CR_LONGCALTIME 0x01
+
+/* ADC touch panel register bits */
+#define ADC_TSCTRL_ENABLE 0x80
+#define ADC_TSCTRL_INTR 0x40
+#define ADC_TSCTRL_SWBYPSS 0x20
+#define ADC_TSCTRL_SWINVT 0x10
+#define ADC_TSCTRL_S400 0x03
+#define ADC_TSCTRL_S200 0x02
+#define ADC_TSCTRL_S100 0x01
+#define ADC_TSCTRL_S50 0x00
+
+/* ADC Interrupt Status Register bits */
+#define ADC_STATUS_TS_BIT 0x80
+#define ADC_STATUS_MBT_BIT 0x40
+#define ADC_STATUS_BBT_BIT 0x20
+#define ADC_STATUS_MIC_BIT 0x10
+
+/* Touch data registers */
+#define ADC_TS_X0X1 0x30
+#define ADC_TS_X2X3 0x34
+#define ADC_TS_Y0Y1 0x38
+#define ADC_TS_Y2Y3 0x3c
+#define ADC_TS_X4X5 0x40
+#define ADC_TS_X6X7 0x44
+#define ADC_TS_Y4Y5 0x48
+#define ADC_TS_Y6Y7 0x50
+
+/* battery data */
+#define ADC_MB_DATA 0x54
+#define ADC_BB_DATA 0x58
+
+/* Sound data register */
+#define ADC_SD_DAT0 0x60
+#define ADC_SD_DAT1 0x64
+#define ADC_SD_DAT2 0x68
+#define ADC_SD_DAT3 0x6c
+#define ADC_SD_DAT4 0x70
+#define ADC_SD_DAT5 0x74
+#define ADC_SD_DAT6 0x78
+#define ADC_SD_DAT7 0x7c
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
new file mode 100644
index 0000000..6c19156
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-h720x/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT 0xf0000000 /* IO peripherals */
+#define IO_PHYS 0x80000000
+#define IO_SIZE 0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT (GPIO_VIRT(0))
+#define GPIO_B_VIRT (GPIO_VIRT(1))
+#define GPIO_C_VIRT (GPIO_VIRT(2))
+#define GPIO_D_VIRT (GPIO_VIRT(3))
+#define GPIO_E_VIRT (GPIO_VIRT(4))
+#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2 (1<<5)
+#define AMULSEL_USOUT2 (1<<6)
+#define AMULSEL_USIN3 (1<<13)
+#define AMULSEL_USOUT3 (1<<14)
+#define AMULSEL_IRDIN (1<<15)
+#define AMULSEL_IRDOUT (1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA 0x00
+#define GPIO_DIR 0x04
+#define GPIO_MASK 0x08
+#define GPIO_STAT 0x0C
+#define GPIO_EDGE 0x10
+#define GPIO_CLR 0x14
+#define GPIO_POL 0x18
+#define GPIO_EN 0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT (IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER 0x00
+#define IRQC_ISR 0x04
+
+/* timer unit */
+#define TIMER_VIRT (IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD 0x00
+#define TM0_COUNT 0x08
+#define TM0_CTRL 0x10
+#define TM1_PERIOD 0x20
+#define TM1_COUNT 0x28
+#define TM1_CTRL 0x30
+#define TM2_PERIOD 0x40
+#define TM2_COUNT 0x48
+#define TM2_CTRL 0x50
+#define TIMER_TOPCTRL 0x60
+#define TIMER_TOPSTAT 0x64
+#define T64_COUNTL 0x80
+#define T64_COUNTH 0x84
+#define T64_CTRL 0x88
+#define T64_BASEL 0x94
+#define T64_BASEH 0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT 0x1
+#define TSTAT_T1INT 0x2
+#define TSTAT_T2INT 0x4
+#define TSTAT_T3INT 0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START 0x1
+#define TM_REPEAT 0x2
+#define TM_RESET 0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR 0x1
+#define ENABLE_TM1_INTR 0x2
+#define ENABLE_TM2_INTR 0x4
+#define TIMER_ENABLE_BIT 0x8
+#define ENABLE_TIMER64 0x10
+#define ENABLE_TIMER64_INT 0x20
+
+/* PMU & PLL */
+#define PMU_BASE (IO_VIRT + 0x1000)
+#define PMU_MODE 0x00
+#define PMU_STAT 0x20
+#define PMU_PLL_CTRL 0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW 0x00
+#define PMU_MODE_RUN 0x01
+#define PMU_MODE_IDLE 0x02
+#define PMU_MODE_SLEEP 0x03
+#define PMU_MODE_INIT 0x04
+#define PMU_MODE_DEEPSLEEP 0x07
+#define PMU_MODE_WAKEUP 0x08
+
+/* PMU ... */
+#define PLL_2_EN 0x8000
+#define PLL_1_EN 0x4000
+#define PLL_3_MUTE 0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET 0x00010000
+#define PLL_CTRL_MASK23 0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE (IO_VIRT + 0x10000)
+#define LCD_CTRL 0x00
+#define LCD_STATUS 0x04
+#define LCD_STATUS_M 0x08
+#define LCD_INTERRUPT 0x0C
+#define LCD_DBAR 0x10
+#define LCD_DCAR 0x14
+#define LCD_TIMING0 0x20
+#define LCD_TIMING1 0x24
+#define LCD_TIMING2 0x28
+#define LCD_TEST 0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE 0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 0x00000006
+#define LCD_CTRL_LCD_4BPP 0x00000000
+#define LCD_CTRL_LCD_8BPP 0x00000002
+#define LCD_CTRL_LCD_16BPP 0x00000004
+#define LCD_CTRL_LCD_BW 0x00000008
+#define LCD_CTRL_LCD_TFT 0x00000010
+#define LCD_CTRL_BGR 0x00001000
+#define LCD_CTRL_LCD_VCOMP 0x00080000
+#define LCD_CTRL_LCD_MONO8 0x00200000
+#define LCD_CTRL_LCD_PWR 0x00400000
+#define LCD_CTRL_LCD_BLE 0x00800000
+#define LCD_CTRL_LDBUSEN 0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE (IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS 0x20000
+#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS 0x21000
+#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE 0x30
+#define SERIAL_ENABLE_EN (1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE (0) /* for inb, outb and friends */
+#define PCIO_VIRT PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
new file mode 100644
index 0000000..1dab74c
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-h720x/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ * 09-19-2001 JJKIM
+ * Created from arch/arm/mach-l7200/include/mach/io.h
+ *
+ * 03-27-2003 Robert Schwebel <r.schwebel@pengutronix.de>:
+ * re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
new file mode 100644
index 0000000..430a92b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-h720x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU 0 /* 0x000001 */
+#define IRQ_DMA 1 /* 0x000002 */
+#define IRQ_LCD 2 /* 0x000004 */
+#define IRQ_VGA 3 /* 0x000008 */
+#define IRQ_PCMCIA1 4 /* 0x000010 */
+#define IRQ_PCMCIA2 5 /* 0x000020 */
+#define IRQ_AFE 6 /* 0x000040 */
+#define IRQ_AIC 7 /* 0x000080 */
+#define IRQ_KEYBOARD 8 /* 0x000100 */
+#define IRQ_TIMER0 9 /* 0x000200 */
+#define IRQ_RTC 10 /* 0x000400 */
+#define IRQ_SOUND 11 /* 0x000800 */
+#define IRQ_USB 12 /* 0x001000 */
+#define IRQ_IrDA 13 /* 0x002000 */
+#define IRQ_UART0 14 /* 0x004000 */
+#define IRQ_UART1 15 /* 0x008000 */
+#define IRQ_SPI 16 /* 0x010000 */
+#define IRQ_GPIOA 17 /* 0x020000 */
+#define IRQ_GPIOB 18 /* 0x040000 */
+#define IRQ_GPIOC 19 /* 0x080000 */
+#define IRQ_GPIOD 20 /* 0x100000 */
+#define IRQ_CommRX 21 /* 0x200000 */
+#define IRQ_CommTX 22 /* 0x400000 */
+#define IRQ_Soft 23 /* 0x800000 */
+
+#define NR_GLBL_IRQS 24
+
+#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+ | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU 0 /* 0x00000001 */
+#define IRQ_DMA 1 /* 0x00000002 */
+#define IRQ_LCD 2 /* 0x00000004 */
+#define IRQ_SOUND 3 /* 0x00000008 */
+#define IRQ_I2S 4 /* 0x00000010 */
+#define IRQ_USB 5 /* 0x00000020 */
+#define IRQ_MMC 6 /* 0x00000040 */
+#define IRQ_RTC 7 /* 0x00000080 */
+#define IRQ_UART0 8 /* 0x00000100 */
+#define IRQ_UART1 9 /* 0x00000200 */
+#define IRQ_UART2 10 /* 0x00000400 */
+#define IRQ_UART3 11 /* 0x00000800 */
+#define IRQ_KBD 12 /* 0x00001000 */
+#define IRQ_PS2 13 /* 0x00002000 */
+#define IRQ_AIC 14 /* 0x00004000 */
+#define IRQ_TIMER0 15 /* 0x00008000 */
+#define IRQ_TIMERX 16 /* 0x00010000 */
+#define IRQ_WDT 17 /* 0x00020000 */
+#define IRQ_CAN0 18 /* 0x00040000 */
+#define IRQ_CAN1 19 /* 0x00080000 */
+#define IRQ_EXT0 20 /* 0x00100000 */
+#define IRQ_EXT1 21 /* 0x00200000 */
+#define IRQ_GPIOA 22 /* 0x00400000 */
+#define IRQ_GPIOB 23 /* 0x00800000 */
+#define IRQ_GPIOC 24 /* 0x01000000 */
+#define IRQ_GPIOD 25 /* 0x02000000 */
+#define IRQ_GPIOE 26 /* 0x04000000 */
+#define IRQ_COMMRX 27 /* 0x08000000 */
+#define IRQ_COMMTX 28 /* 0x10000000 */
+#define IRQ_SMC 29 /* 0x20000000 */
+#define IRQ_Soft 30 /* 0x40000000 */
+#define IRQ_RESERVED1 31 /* 0x80000000 */
+#define NR_GLBL_IRQS 32
+
+#define NR_TIMERX_IRQS 3
+
+#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+ (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+ (1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
new file mode 100644
index 0000000..cb26f49
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-h720x/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ * ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET UL(0x40000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
new file mode 100644
index 0000000..e4a7c76
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <mach/hardware.h>
+
+static void arch_idle(void)
+{
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+ nop();
+ nop();
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+ nop();
+ nop();
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+ CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
new file mode 100644
index 0000000..3f2f447
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-h720x/include/mach/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE 3686400
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
new file mode 100644
index 0000000..d662323
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-h720x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/hardware.h>
+
+#define LSR 0x14
+#define TEMPTY 0x40
+
+static inline void putc(int c)
+{
+ volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+ /* wait until transmit buffer is empty */
+ while((p[LSR] & TEMPTY) == 0x0)
+ barrier();
+
+ /* write next character */
+ *p = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
new file mode 100644
index 0000000..ff1460d
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 8915a5f..4b4230d 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
#include <linux/err.h>
#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
/*
* Very simple approach: We can't disable clocks, so we do
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index 3fee1ac..434b4ca 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
#include <linux/err.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "generic.h"
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index 17a43ba..c10810c 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index df77665..fa72174 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
#include <linux/string.h>
#include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
#include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 0000000..87802bbf
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,34 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x00000000 @ physical
+ movne \rx, #0xe0000000 @ virtual
+ orreq \rx, \rx, #0x00200000 @ physical
+ orr \rx, \rx, #0x00006000 @ UART1 offset
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/include/asm-arm/arch-imx/dma.h b/arch/arm/mach-imx/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-imx/dma.h
rename to arch/arm/mach-imx/include/mach/dma.h
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
new file mode 100644
index 0000000..e4db679
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-imx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+#define AITC_NIVECSR 0x40
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
+ @ Load offset & priority of the highest priority
+ @ interrupt pending.
+ ldr \irqstat, [\base, #AITC_NIVECSR]
+ @ Shift off the priority leaving the offset or
+ @ "interrupt number", use arithmetic shift to
+ @ transform illegal source (0xffff) as -1
+ mov \irqnr, \irqstat, asr #16
+ adds \tmp, \irqnr, #1
+ .endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
new file mode 100644
index 0000000..6e3d795
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -0,0 +1,102 @@
+#ifndef _IMX_GPIO_H
+
+#include <mach/imx-regs.h>
+
+#define IMX_GPIO_ALLOC_MODE_NORMAL 0
+#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
+#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
+#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
+#define IMX_GPIO_ALLOC_MODE_RELEASE 8
+
+extern int imx_gpio_request(unsigned gpio, const char *label);
+
+extern void imx_gpio_free(unsigned gpio);
+
+extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ int alloc_mode, const char *label);
+
+extern int imx_gpio_direction_input(unsigned gpio);
+
+extern int imx_gpio_direction_output(unsigned gpio, int value);
+
+extern void __imx_gpio_set_value(unsigned gpio, int value);
+
+static inline int imx_gpio_get_value(unsigned gpio)
+{
+ return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
+}
+
+static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
+{
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ if(value)
+ DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
+ else
+ DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
+ raw_local_irq_restore(flags);
+}
+
+static inline void imx_gpio_set_value(unsigned gpio, int value)
+{
+ if(__builtin_constant_p(gpio))
+ imx_gpio_set_value_inline(gpio, value);
+ else
+ __imx_gpio_set_value(gpio, value);
+}
+
+extern int imx_gpio_to_irq(unsigned gpio);
+
+extern int imx_irq_to_gpio(unsigned irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
+ * to allow future extension of GPIO logic.
+ */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return imx_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ imx_gpio_free(gpio);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return imx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return imx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return imx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ imx_gpio_set_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return imx_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return imx_irq_to_gpio(irq);
+}
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 0000000..c73e9e7
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-imx/include/mach/hardware.h
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS 0x00200000
+#define IMX_IO_SIZE 0x00100000
+#define IMX_IO_BASE 0xe0000000
+
+#define IMX_CS0_PHYS 0x10000000
+#define IMX_CS0_SIZE 0x02000000
+#define IMX_CS0_VIRT 0xe8000000
+
+#define IMX_CS1_PHYS 0x12000000
+#define IMX_CS1_SIZE 0x01000000
+#define IMX_CS1_VIRT 0xea000000
+
+#define IMX_CS2_PHYS 0x13000000
+#define IMX_CS2_SIZE 0x01000000
+#define IMX_CS2_VIRT 0xeb000000
+
+#define IMX_CS3_PHYS 0x14000000
+#define IMX_CS3_SIZE 0x01000000
+#define IMX_CS3_VIRT 0xec000000
+
+#define IMX_CS4_PHYS 0x15000000
+#define IMX_CS4_SIZE 0x01000000
+#define IMX_CS4_VIRT 0xed000000
+
+#define IMX_CS5_PHYS 0x16000000
+#define IMX_CS5_SIZE 0x01000000
+#define IMX_CS5_VIRT 0xee000000
+
+#define IMX_FB_VIRT 0xF1000000
+#define IMX_FB_SIZE (256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+#endif
+
+#define MAXIRQNUM 62
+#define MAXFIQNUM 62
+#define MAXSWINUM 62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE 0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-dma.h
rename to arch/arm/mach-imx/include/mach/imx-dma.h
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-regs.h
rename to arch/arm/mach-imx/include/mach/imx-regs.h
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-uart.h
rename to arch/arm/mach-imx/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-imx/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
similarity index 100%
rename from include/asm-arm/arch-imx/imxfb.h
rename to arch/arm/mach-imx/include/mach/imxfb.h
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
new file mode 100644
index 0000000..c50c5fa
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-imxads/include/mach/io.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 0000000..eb8d5bd
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-imxads/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <mach/hardware.h>
+
+/*
+ * IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT 0
+#define CSI_INT 6
+#define DSPA_MAC_INT 7
+#define DSPA_INT 8
+#define COMP_INT 9
+#define MSHC_XINT 10
+#define GPIO_INT_PORTA 11
+#define GPIO_INT_PORTB 12
+#define GPIO_INT_PORTC 13
+#define LCDC_INT 14
+#define SIM_INT 15
+#define SIM_DATA_INT 16
+#define RTC_INT 17
+#define RTC_SAMINT 18
+#define UART2_MINT_PFERR 19
+#define UART2_MINT_RTS 20
+#define UART2_MINT_DTR 21
+#define UART2_MINT_UARTC 22
+#define UART2_MINT_TX 23
+#define UART2_MINT_RX 24
+#define UART1_MINT_PFERR 25
+#define UART1_MINT_RTS 26
+#define UART1_MINT_DTR 27
+#define UART1_MINT_UARTC 28
+#define UART1_MINT_TX 29
+#define UART1_MINT_RX 30
+#define VOICE_DAC_INT 31
+#define VOICE_ADC_INT 32
+#define PEN_DATA_INT 33
+#define PWM_INT 34
+#define SDHC_INT 35
+#define I2C_INT 39
+#define CSPI_INT 41
+#define SSI_TX_INT 42
+#define SSI_TX_ERR_INT 43
+#define SSI_RX_INT 44
+#define SSI_RX_ERR_INT 45
+#define TOUCH_INT 46
+#define USBD_INT0 47
+#define USBD_INT1 48
+#define USBD_INT2 49
+#define USBD_INT3 50
+#define USBD_INT4 51
+#define USBD_INT5 52
+#define USBD_INT6 53
+#define BTSYS_INT 55
+#define BTTIM_INT 56
+#define BTWUI_INT 57
+#define TIM2_INT 58
+#define TIM1_INT 59
+#define DMA_ERR 60
+#define DMA_INT 61
+#define GPIO_INT_PORTD 62
+
+#define IMX_IRQS (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ * the following pins are connected to the outside
+ * world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ * - mapping the interrupts without holes would get
+ * far more complicated
+ * - Motorola could well decide to bring some processor
+ * with more pins connected
+ */
+
+#define IRQ_GPIOA(x) (IMX_IRQS + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
new file mode 100644
index 0000000..5c45306
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-imx/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET UL(0x08000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
similarity index 100%
rename from include/asm-arm/arch-imx/mmc.h
rename to arch/arm/mach-imx/include/mach/mmc.h
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
new file mode 100644
index 0000000..def05d5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-imx/include/mach/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS 0x10000000
+#define MX1ADS_FLASH_SIZE (16*1024*1024)
+
+#define IMX_FB_PHYS (0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
new file mode 100644
index 0000000..4186430
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/mach-imx/include/mach/spi_imx.h
+ *
+ * Copyright (C) 2006 SWAPP
+ * Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SPI_IMX_H_
+#define SPI_IMX_H_
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ * SPI slaves, and are numbered from zero to num_chipselects - 1.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+*/
+struct spi_imx_master {
+ u8 num_chipselect;
+ u8 enable_dma:1;
+};
+/*-------------------------------------------------------------------------*/
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ * @enable_loopback : used for test purpouse to internally connect RX and TX
+ * sections.
+ * @enable_dma : enables dma transfer (provided that controller driver has
+ * dma enabled too).
+ * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
+ * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
+ * @cs_control : function pointer to board-specific function to assert/deassert
+ * I/O port to control HW generation of devices chip-select.
+*/
+struct spi_imx_chip {
+ u8 enable_loopback:1;
+ u8 enable_dma:1;
+ u8 ins_ss_pulse:1;
+ u16 bclk_wait:15;
+ void (*cs_control)(u32 control);
+};
+
+/* Chip-select state */
+#define SPI_CS_ASSERT (1 << 0)
+#define SPI_CS_DEASSERT (1 << 1)
+/*-------------------------------------------------------------------------*/
+
+
+#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
new file mode 100644
index 0000000..adee7e5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-imxads/include/mach/system.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/arch/arm/mach-imx/include/mach/timex.h
similarity index 100%
rename from include/asm-arm/arch-imx/timex.h
rename to arch/arm/mach-imx/include/mach/timex.h
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 0000000..70523e6
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/mach-imxads/include/mach/uncompress.h
+ *
+ *
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR 0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+ unsigned long serial_port;
+
+ do {
+ serial_port = UART1_BASE;
+ if ( UART(UCR1) & UCR1_UARTEN )
+ break;
+ serial_port = UART2_BASE;
+ if ( UART(UCR1) & UCR1_UARTEN )
+ break;
+ return;
+ } while(0);
+
+ while (!(UART(USR2) & USR2_TXFE))
+ barrier();
+
+ UART(TXR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
new file mode 100644
index 0000000..7d7cb0b
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-imx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 167b7fc..798f221 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
#include <linux/list.h>
#include <linux/timer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 8757d37..af81621 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index baf5e2f..87fa1ff 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -25,8 +25,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
#include <linux/interrupt.h>
#include "generic.h"
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 7fc6d2c..08be387 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
#include <linux/clockchips.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index f439bf1..8bacf6d4 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index afa0f21..ce5ea7c 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -20,7 +20,7 @@
#include <linux/smp.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 5a1588c..0a7b326 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
#include <asm/io.h>
#include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
#include <asm/sizes.h>
#include "clock.h"
diff --git a/include/asm-arm/arch-integrator/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
similarity index 100%
rename from include/asm-arm/arch-integrator/bits.h
rename to arch/arm/mach-integrator/include/mach/bits.h
diff --git a/include/asm-arm/arch-integrator/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
similarity index 100%
rename from include/asm-arm/arch-integrator/cm.h
rename to arch/arm/mach-integrator/include/mach/cm.h
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
new file mode 100644
index 0000000..d347d65
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x16000000 @ physical base address
+ movne \rx, #0xf0000000 @ virtual base
+ addne \rx, \rx, #0x16000000 >> 4
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
new file mode 100644
index 0000000..fbebe85
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-integrator/include/mach/dma.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
new file mode 100644
index 0000000..7649c57
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+ ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+ mov \irqnr, #IRQ_PIC_START
+ ldr \irqstat, [\base, #IRQ_STATUS] @ get masked status
+ ldr \base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+ teq \irqstat, #0
+ ldreq \irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+ moveq \irqnr, #IRQ_CIC_START
+
+1001: tst \irqstat, #15
+ bne 1002f
+ add \irqnr, \irqnr, #4
+ movs \irqstat, \irqstat, lsr #4
+ bne 1001b
+1002: tst \irqstat, #1
+ bne 1003f
+ add \irqnr, \irqnr, #1
+ movs \irqstat, \irqstat, lsr #1
+ bne 1002b
+1003: /* EQ will be set if no irqs pending */
+ .endm
+
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
new file mode 100644
index 0000000..1251319
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-integrator/include/mach/hardware.h
+ *
+ * This file contains the hardware definitions of the Integrator.
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE 0xF0000000 // VA of IO
+#define IO_SIZE 0x0B000000 // How much?
+#define IO_START INTEGRATOR_HDR_BASE // PA of IO
+
+#define PCIO_BASE PCI_IO_VADDR
+#define PCIMEM_BASE PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE)
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x6000
+#define PCIBIOS_MIN_MEM 0x00100000
+
+#endif
+
diff --git a/include/asm-arm/arch-integrator/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
similarity index 100%
rename from include/asm-arm/arch-integrator/impd1.h
rename to arch/arm/mach-integrator/include/mach/impd1.h
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
new file mode 100644
index 0000000..f21bb54
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-integrator/include/mach/io.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR 0xe8000000
+#define PCI_CONFIG_VADDR 0xec000000
+#define PCI_V3_VADDR 0xed000000
+#define PCI_IO_VADDR 0xee000000
+
+#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
new file mode 100644
index 0000000..1fbe6d1
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ * arch/arm/mach-integrator/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Interrupt numbers
+ */
+#define IRQ_PIC_START 0
+#define IRQ_SOFTINT 0
+#define IRQ_UARTINT0 1
+#define IRQ_UARTINT1 2
+#define IRQ_KMIINT0 3
+#define IRQ_KMIINT1 4
+#define IRQ_TIMERINT0 5
+#define IRQ_TIMERINT1 6
+#define IRQ_TIMERINT2 7
+#define IRQ_RTCINT 8
+#define IRQ_AP_EXPINT0 9
+#define IRQ_AP_EXPINT1 10
+#define IRQ_AP_EXPINT2 11
+#define IRQ_AP_EXPINT3 12
+#define IRQ_AP_PCIINT0 13
+#define IRQ_AP_PCIINT1 14
+#define IRQ_AP_PCIINT2 15
+#define IRQ_AP_PCIINT3 16
+#define IRQ_AP_V3INT 17
+#define IRQ_AP_CPINT0 18
+#define IRQ_AP_CPINT1 19
+#define IRQ_AP_LBUSTIMEOUT 20
+#define IRQ_AP_APCINT 21
+#define IRQ_CP_CLCDCINT 22
+#define IRQ_CP_MMCIINT0 23
+#define IRQ_CP_MMCIINT1 24
+#define IRQ_CP_AACIINT 25
+#define IRQ_CP_CPPLDINT 26
+#define IRQ_CP_ETHINT 27
+#define IRQ_CP_TSPENINT 28
+#define IRQ_PIC_END 31
+
+#define IRQ_CIC_START 32
+#define IRQ_CM_SOFTINT 32
+#define IRQ_CM_COMMRX 33
+#define IRQ_CM_COMMTX 34
+#define IRQ_CIC_END 34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START 35
+#define IRQ_SIC_CP_SOFTINT 35
+#define IRQ_SIC_CP_RI0 36
+#define IRQ_SIC_CP_RI1 37
+#define IRQ_SIC_CP_CARDIN 38
+#define IRQ_SIC_CP_LMINT0 39
+#define IRQ_SIC_CP_LMINT1 40
+#define IRQ_SIC_CP_LMINT2 41
+#define IRQ_SIC_CP_LMINT3 42
+#define IRQ_SIC_CP_LMINT4 43
+#define IRQ_SIC_CP_LMINT5 44
+#define IRQ_SIC_CP_LMINT6 45
+#define IRQ_SIC_CP_LMINT7 46
+#define IRQ_SIC_END 46
+
+#define NR_IRQS 47
+
diff --git a/include/asm-arm/arch-integrator/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
similarity index 100%
rename from include/asm-arm/arch-integrator/lm.h
rename to arch/arm/mach-integrator/include/mach/lm.h
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
new file mode 100644
index 0000000..be7e63c
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-integrator/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+#define BUS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-integrator/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
similarity index 100%
rename from include/asm-arm/arch-integrator/platform.h
rename to arch/arm/mach-integrator/include/mach/platform.h
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
new file mode 100644
index 0000000..c485345
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/system.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/cm.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
new file mode 100644
index 0000000..1dcb420
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-integrator/include/mach/timex.h
+ *
+ * Integrator architecture timex specifications
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
new file mode 100644
index 0000000..30452f0
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-integrator/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+ while (AMBA_UART_FR & (1 << 5))
+ barrier();
+
+ AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+ while (AMBA_UART_FR & (1 << 3))
+ barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
new file mode 100644
index 0000000..e87ab0b
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-integrator/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 3996ddc..6e472b5 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 28d3301..6b99e9c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware/icst525.h>
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 6062180..7bc6881 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
static int saved_leds;
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index f939c50..f52c7af 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
#include <linux/device.h>
#include <linux/slab.h>
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
#define to_lm_device(d) container_of(d, struct lm_device, dev)
#define to_lm_driver(d) container_of(d, struct lm_driver, drv)
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index b8685d9..9f2b1ea 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
new file mode 100644
index 0000000..60019c8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright(c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+#define ADMA_ACCR(chan) (chan->mmr_base + 0x0)
+#define ADMA_ACSR(chan) (chan->mmr_base + 0x4)
+#define ADMA_ADAR(chan) (chan->mmr_base + 0x8)
+#define ADMA_IIPCR(chan) (chan->mmr_base + 0x18)
+#define ADMA_IIPAR(chan) (chan->mmr_base + 0x1c)
+#define ADMA_IIPUAR(chan) (chan->mmr_base + 0x20)
+#define ADMA_ANDAR(chan) (chan->mmr_base + 0x24)
+#define ADMA_ADCR(chan) (chan->mmr_base + 0x28)
+#define ADMA_CARMD(chan) (chan->mmr_base + 0x2c)
+#define ADMA_ABCR(chan) (chan->mmr_base + 0x30)
+#define ADMA_DLADR(chan) (chan->mmr_base + 0x34)
+#define ADMA_DUADR(chan) (chan->mmr_base + 0x38)
+#define ADMA_SLAR(src, chan) (chan->mmr_base + (0x3c + (src << 3)))
+#define ADMA_SUAR(src, chan) (chan->mmr_base + (0x40 + (src << 3)))
+
+struct iop13xx_adma_src {
+ u32 src_addr;
+ union {
+ u32 upper_src_addr;
+ struct {
+ unsigned int pq_upper_src_addr:24;
+ unsigned int pq_dmlt:8;
+ };
+ };
+};
+
+struct iop13xx_adma_desc_ctrl {
+ unsigned int int_en:1;
+ unsigned int xfer_dir:2;
+ unsigned int src_select:4;
+ unsigned int zero_result:1;
+ unsigned int block_fill_en:1;
+ unsigned int crc_gen_en:1;
+ unsigned int crc_xfer_dis:1;
+ unsigned int crc_seed_fetch_dis:1;
+ unsigned int status_write_back_en:1;
+ unsigned int endian_swap_en:1;
+ unsigned int reserved0:2;
+ unsigned int pq_update_xfer_en:1;
+ unsigned int dual_xor_en:1;
+ unsigned int pq_xfer_en:1;
+ unsigned int p_xfer_dis:1;
+ unsigned int reserved1:10;
+ unsigned int relax_order_en:1;
+ unsigned int no_snoop_en:1;
+};
+
+struct iop13xx_adma_byte_count {
+ unsigned int byte_count:24;
+ unsigned int host_if:3;
+ unsigned int reserved:2;
+ unsigned int zero_result_err_q:1;
+ unsigned int zero_result_err:1;
+ unsigned int tx_complete:1;
+};
+
+struct iop13xx_adma_desc_hw {
+ u32 next_desc;
+ union {
+ u32 desc_ctrl;
+ struct iop13xx_adma_desc_ctrl desc_ctrl_field;
+ };
+ union {
+ u32 crc_addr;
+ u32 block_fill_data;
+ u32 q_dest_addr;
+ };
+ union {
+ u32 byte_count;
+ struct iop13xx_adma_byte_count byte_count_field;
+ };
+ union {
+ u32 dest_addr;
+ u32 p_dest_addr;
+ };
+ union {
+ u32 upper_dest_addr;
+ u32 pq_upper_dest_addr;
+ };
+ struct iop13xx_adma_src src[1];
+};
+
+struct iop13xx_adma_desc_dual_xor {
+ u32 next_desc;
+ u32 desc_ctrl;
+ u32 reserved;
+ u32 byte_count;
+ u32 h_dest_addr;
+ u32 h_upper_dest_addr;
+ u32 src0_addr;
+ u32 upper_src0_addr;
+ u32 src1_addr;
+ u32 upper_src1_addr;
+ u32 h_src_addr;
+ u32 h_upper_src_addr;
+ u32 d_src_addr;
+ u32 d_upper_src_addr;
+ u32 d_dest_addr;
+ u32 d_upper_dest_addr;
+};
+
+struct iop13xx_adma_desc_pq_update {
+ u32 next_desc;
+ u32 desc_ctrl;
+ u32 reserved;
+ u32 byte_count;
+ u32 p_dest_addr;
+ u32 p_upper_dest_addr;
+ u32 src0_addr;
+ u32 upper_src0_addr;
+ u32 src1_addr;
+ u32 upper_src1_addr;
+ u32 p_src_addr;
+ u32 p_upper_src_addr;
+ u32 q_src_addr;
+ struct {
+ unsigned int q_upper_src_addr:24;
+ unsigned int q_dmlt:8;
+ };
+ u32 q_dest_addr;
+ u32 q_upper_dest_addr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+ return 16;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+ return __raw_readl(ADMA_ADAR(chan));
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+ u32 next_desc_addr)
+{
+ __raw_writel(next_desc_addr, ADMA_ANDAR(chan));
+}
+
+#define ADMA_STATUS_BUSY (1 << 13)
+
+static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+ if (__raw_readl(ADMA_ACSR(chan)) &
+ ADMA_STATUS_BUSY)
+ return 1;
+ else
+ return 0;
+}
+
+static inline int
+iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
+{
+ return 1;
+}
+#define iop_desc_is_aligned(x, y) 1
+
+static inline int
+iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+ *slots_per_op = 1;
+ return 1;
+}
+
+#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
+
+static inline int
+iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+ *slots_per_op = 1;
+ return 1;
+}
+
+static inline int
+iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+ static const char slot_count_table[] = { 1, 2, 2, 2,
+ 2, 3, 3, 3,
+ 3, 4, 4, 4,
+ 4, 5, 5, 5,
+ };
+ *slots_per_op = slot_count_table[src_cnt - 1];
+ return *slots_per_op;
+}
+
+#define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->dest_addr;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->byte_count_field.byte_count;
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan,
+ int src_idx)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->src[src_idx].src_addr;
+}
+
+static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->desc_ctrl_field.src_select + 1;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+ hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.block_fill_en = 1;
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+ hw_desc->crc_addr = 0;
+}
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+ hw_desc->crc_addr = 0;
+
+}
+#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.zero_result = 1;
+ u_desc_ctrl.field.status_write_back_en = 1;
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+ hw_desc->crc_addr = 0;
+
+ return 1;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan,
+ u32 byte_count)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ hw_desc->byte_count = byte_count;
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+ int slots_per_op = desc->slots_per_op;
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+ int i = 0;
+
+ if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+ hw_desc->byte_count = len;
+ } else {
+ do {
+ iter = iop_hw_desc_slot_idx(hw_desc, i);
+ iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+ len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+ i += slots_per_op;
+ } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+ if (len) {
+ iter = iop_hw_desc_slot_idx(hw_desc, i);
+ iter->byte_count = len;
+ }
+ }
+}
+
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan,
+ dma_addr_t addr)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ hw_desc->dest_addr = addr;
+ hw_desc->upper_dest_addr = 0;
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+ dma_addr_t addr)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ hw_desc->src[0].src_addr = addr;
+ hw_desc->src[0].upper_src_addr = 0;
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+ int src_idx, dma_addr_t addr)
+{
+ int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+ int i = 0;
+
+ do {
+ iter = iop_hw_desc_slot_idx(hw_desc, i);
+ iter->src[src_idx].src_addr = addr;
+ iter->src[src_idx].upper_src_addr = 0;
+ slot_cnt -= slots_per_op;
+ if (slot_cnt) {
+ i += slots_per_op;
+ addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
+ }
+ } while (slot_cnt);
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ iop_desc_init_memcpy(desc, 1);
+ iop_desc_set_byte_count(desc, chan, 0);
+ iop_desc_set_dest_addr(desc, chan, 0);
+ iop_desc_set_memcpy_src_addr(desc, 0);
+}
+
+#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+ u32 next_desc_addr)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ BUG_ON(hw_desc->next_desc);
+ hw_desc->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ hw_desc->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+ u32 val)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ hw_desc->block_fill_data = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+ struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+
+ BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
+
+ if (desc_ctrl.pq_xfer_en)
+ return byte_count.zero_result_err_q;
+ else
+ return byte_count.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+ u32 adma_accr;
+
+ adma_accr = __raw_readl(ADMA_ACCR(chan));
+ adma_accr |= 0x2;
+ __raw_writel(adma_accr, ADMA_ACCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+ return __raw_readl(ADMA_ACSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+ u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+ adma_chan_ctrl &= ~0x1;
+ __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+ u32 adma_chan_ctrl;
+
+ adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+ adma_chan_ctrl |= 0x1;
+ __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+ u32 status = __raw_readl(ADMA_ACSR(chan));
+ status &= (1 << 12);
+ __raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+ u32 status = __raw_readl(ADMA_ACSR(chan));
+ status &= (1 << 11);
+ __raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+ u32 status = __raw_readl(ADMA_ACSR(chan));
+ status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
+ __raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+ return test_bit(9, &status);
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+ return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+ return test_bit(4, &status);
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+ return test_bit(3, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+ return 0;
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+ return 0;
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+ return 0;
+}
+
+#endif /* _ADMA_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..9037d2e
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ mmu enabled?
+ moveq \rx, #0xff000000 @ physical
+ orreq \rx, \rx, #0x00d80000
+ movne \rx, #0xfe000000 @ virtual
+ orrne \rx, \rx, #0x00e80000
+ orr \rx, \rx, #0x00002300
+ orr \rx, \rx, #0x00000040
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/dma.h
rename to arch/arm/mach-iop13xx/include/mach/dma.h
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
similarity index 100%
rename from include/asm-arm/arch-iop13xx/entry-macro.S
rename to arch/arm/mach-iop13xx/include/mach/entry-macro.S
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/hardware.h
rename to arch/arm/mach-iop13xx/include/mach/hardware.h
diff --git a/include/asm-arm/arch-iop13xx/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/io.h
rename to arch/arm/mach-iop13xx/include/mach/io.h
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/iop13xx.h
rename to arch/arm/mach-iop13xx/include/mach/iop13xx.h
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/iq81340.h
rename to arch/arm/mach-iop13xx/include/mach/iq81340.h
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/irqs.h
rename to arch/arm/mach-iop13xx/include/mach/irqs.h
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
new file mode 100644
index 0000000..e8b59d8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+#define TASK_SIZE UL(0x3f000000)
+#define PAGE_OFFSET UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x) (__virt_to_phys(x))
+#define __bus_to_virt(x) (__phys_to_virt(x))
+
+#define virt_to_lbus(x) \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x) \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+ (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page) \
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr) (0)
+
+#endif
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/msi.h
rename to arch/arm/mach-iop13xx/include/mach/msi.h
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
new file mode 100644
index 0000000..17b5515
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \
+ IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \
+ IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \
+ IOP13XX_ATUE_STAT_ERR_COR | \
+ IOP13XX_ATUE_STAT_ERR_UNCOR | \
+ IOP13XX_ATUE_STAT_CRS | \
+ IOP13XX_ATUE_STAT_DET_PAR_ERR | \
+ IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+ IOP13XX_ATUE_STAT_SIG_TABORT | \
+ IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+ IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \
+ IOP13XX_ATUX_STAT_REC_SCEM | \
+ IOP13XX_ATUX_STAT_TX_SERR | \
+ IOP13XX_ATUX_STAT_DET_PAR_ERR | \
+ IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+ IOP13XX_ATUX_STAT_REC_SERR | \
+ IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+ IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+ IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+ IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
new file mode 100644
index 0000000..c7127f4
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/system.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/iop13xx.h>
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Reset the internal bus (warning both cores are reset)
+ */
+ write_wdtcr(IOP_WDTCR_EN_ARM);
+ write_wdtcr(IOP_WDTCR_EN);
+ write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+ write_wdtcr(0x1000);
+
+ for(;;);
+}
diff --git a/include/asm-arm/arch-iop13xx/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/time.h
rename to arch/arm/mach-iop13xx/include/mach/time.h
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
new file mode 100644
index 0000000..5b1f1c8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -0,0 +1,3 @@
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
new file mode 100644
index 0000000..fa4f805
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -0,0 +1,23 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+ while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+ UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/vmalloc.h
rename to arch/arm/mach-iop13xx/include/mach/vmalloc.h
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 44b8c8c..26cfa31 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index e17457e..5051c03 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
*/
#include <linux/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
#include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 19204d8..bc44307 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
*/
#include <linux/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
#include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
extern int init_atu;
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index e860a6d..0d099ca 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,9 +23,9 @@
#include <asm/uaccess.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
/* INTCTL0 CP6 R0 Page 4
*/
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index a0e0147..673b0db 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/sizes.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
#define IOP13XX_PCI_DEBUG 0
#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index d3fee8a..b17ccc8 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
#include <linux/mtd/physmap.h>
#endif
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 9941395..3ad4696 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
static void __init em7210_timer_init(void)
{
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 8761445..45d6127 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* GLAN Tank timer tick configuration.
diff --git a/include/asm-arm/arch-iop32x/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/adma.h
rename to arch/arm/mach-iop32x/include/mach/adma.h
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
new file mode 100644
index 0000000..58b0166
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rx
+ mov \rx, #0xfe000000 @ physical as well as virtual
+ orr \rx, \rx, #0x00800000 @ location of the UART
+ .endm
+
+#define UART_SHIFT 0
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
new file mode 100644
index 0000000..f8bd817
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 0000000..b02fb56
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mrc p15, 0, \tmp, c15, c1, 0
+ orr \tmp, \tmp, #(1 << 6)
+ mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
+ mrc p15, 0, \tmp, c15, c1, 0
+ mov \tmp, \tmp
+ sub pc, pc, #4 @ cp_wait
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
+ cmp \irqstat, #0
+ clzne \irqnr, \irqstat
+ rsbne \irqnr, \irqnr, #31
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ mrc p15, 0, \tmp1, c15, c1, 0
+ ands \tmp2, \tmp1, #(1 << 6)
+ bicne \tmp1, \tmp1, #(1 << 6)
+ mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
+ .endm
diff --git a/arch/arm/mach-iop32x/include/mach/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
new file mode 100644
index 0000000..958eb91
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/glantank.h
+ *
+ * IO-Data GLAN Tank board registers
+ */
+
+#ifndef __GLANTANK_H
+#define __GLANTANK_H
+
+#define GLANTANK_UART 0xfe800000 /* UART */
+
+
+#endif
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/gpio.h
rename to arch/arm/mach-iop32x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 0000000..d559c4e
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO 0x00000000
+#define PCIBIOS_MIN_MEM 0x00000000
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
new file mode 100644
index 0000000..ce54705
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT 0xffffffff
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a) (a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
new file mode 100644
index 0000000..abd9eb4
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
+ *
+ * Intel IOP32X Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP32X_H
+#define __IOP32X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
+#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE 0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
+#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
new file mode 100644
index 0000000..6b6b369
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef __IQ31244_H
+#define __IQ31244_H
+
+#define IQ31244_UART 0xfe800000 /* UART #1 */
+#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
+#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
+#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
new file mode 100644
index 0000000..498819b
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef __IQ80321_H
+#define __IQ80321_H
+
+#define IQ80321_UART 0xfe800000 /* UART #1 */
+#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
+#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
+#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 0000000..33573e0
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright: (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT 0
+#define IRQ_IOP32X_DMA0_EOC 1
+#define IRQ_IOP32X_DMA1_EOT 2
+#define IRQ_IOP32X_DMA1_EOC 3
+#define IRQ_IOP32X_AA_EOT 6
+#define IRQ_IOP32X_AA_EOC 7
+#define IRQ_IOP32X_CORE_PMON 8
+#define IRQ_IOP32X_TIMER0 9
+#define IRQ_IOP32X_TIMER1 10
+#define IRQ_IOP32X_I2C_0 11
+#define IRQ_IOP32X_I2C_1 12
+#define IRQ_IOP32X_MESSAGING 13
+#define IRQ_IOP32X_ATU_BIST 14
+#define IRQ_IOP32X_PERFMON 15
+#define IRQ_IOP32X_CORE_PMU 16
+#define IRQ_IOP32X_BIU_ERR 17
+#define IRQ_IOP32X_ATU_ERR 18
+#define IRQ_IOP32X_MCU_ERR 19
+#define IRQ_IOP32X_DMA0_ERR 20
+#define IRQ_IOP32X_DMA1_ERR 21
+#define IRQ_IOP32X_AA_ERR 23
+#define IRQ_IOP32X_MSG_ERR 24
+#define IRQ_IOP32X_SSP 25
+#define IRQ_IOP32X_XINT0 27
+#define IRQ_IOP32X_XINT1 28
+#define IRQ_IOP32X_XINT2 29
+#define IRQ_IOP32X_XINT3 30
+#define IRQ_IOP32X_HPI 31
+
+#define NR_IRQS 32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
new file mode 100644
index 0000000..42cd4bf
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0xa0000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) (__virt_to_phys(x))
+#define __bus_to_virt(x) (__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
new file mode 100644
index 0000000..40b8a53
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/n2100.h
+ *
+ * Thecus N2100 board registers
+ */
+
+#ifndef __N2100_H
+#define __N2100_H
+
+#define N2100_UART 0xfe800000 /* UART */
+
+#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0)
+#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2)
+#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3)
+#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4)
+#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5)
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
new file mode 100644
index 0000000..20f923e
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ local_irq_disable();
+
+ if (machine_is_n2100()) {
+ gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+ gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+ while (1)
+ ;
+ }
+
+ *IOP3XX_PCSR = 0x30;
+
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop32x/time.h b/arch/arm/mach-iop32x/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/time.h
rename to arch/arm/mach-iop32x/include/mach/time.h
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
new file mode 100644
index 0000000..a541afc
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/timex.h
+ *
+ * IOP32x architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 0000000..b247551
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+ uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ if (machine_is_iq80321())
+ uart_base = (volatile u8 *)IQ80321_UART;
+ else if (machine_is_iq31244() || machine_is_em7210())
+ uart_base = (volatile u8 *)IQ31244_UART;
+ else
+ uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 0000000..85ceb09
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 5a4e951..082818aa 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1c098c5..d735539 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 2ea1e71..ba59b2d 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
#include <linux/list.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index f38dc19..3173f9c 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,7 +30,7 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -40,7 +40,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* N2100 timer tick configuration.
diff --git a/include/asm-arm/arch-iop33x/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/adma.h
rename to arch/arm/mach-iop33x/include/mach/adma.h
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
new file mode 100644
index 0000000..a60c9ef
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ mmu enabled?
+ moveq \rx, #0xff000000 @ physical
+ movne \rx, #0xfe000000 @ virtual
+ orr \rx, \rx, #0x00ff0000
+ orr \rx, \rx, #0x0000f700
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
new file mode 100644
index 0000000..d8b4223
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e1f728
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mrc p15, 0, \tmp, c15, c1, 0
+ orr \tmp, \tmp, #(1 << 6)
+ mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
+ mrc p15, 0, \tmp, c15, c1, 0
+ mov \tmp, \tmp
+ sub pc, pc, #4 @ cp_wait
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC
+ cmp \irqstat, #0
+ mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround
+ adds \irqnr, \irqstat, #1
+ movne \irqnr, \irqstat, lsr #2
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ mrc p15, 0, \tmp1, c15, c1, 0
+ ands \tmp2, \tmp1, #(1 << 6)
+ bicne \tmp1, \tmp1, #(1 << 6)
+ mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
+ .endm
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/gpio.h
rename to arch/arm/mach-iop33x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 0000000..8c10e43
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO 0x00000000
+#define PCIBIOS_MIN_MEM 0x00000000
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
new file mode 100644
index 0000000..1588746
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT 0xffffffff
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a) (a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 0000000..2456731
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
+#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs */
+#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE 0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 0000000..fe406b0
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
+#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */
+#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 0000000..8325d71
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
+#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */
+#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 0000000..707628a
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright: (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT 0
+#define IRQ_IOP33X_DMA0_EOC 1
+#define IRQ_IOP33X_DMA1_EOT 2
+#define IRQ_IOP33X_DMA1_EOC 3
+#define IRQ_IOP33X_AA_EOT 6
+#define IRQ_IOP33X_AA_EOC 7
+#define IRQ_IOP33X_TIMER0 8
+#define IRQ_IOP33X_TIMER1 9
+#define IRQ_IOP33X_I2C_0 10
+#define IRQ_IOP33X_I2C_1 11
+#define IRQ_IOP33X_MSG 12
+#define IRQ_IOP33X_MSGIBQ 13
+#define IRQ_IOP33X_ATU_BIST 14
+#define IRQ_IOP33X_PERFMON 15
+#define IRQ_IOP33X_CORE_PMU 16
+#define IRQ_IOP33X_XINT0 24
+#define IRQ_IOP33X_XINT1 25
+#define IRQ_IOP33X_XINT2 26
+#define IRQ_IOP33X_XINT3 27
+#define IRQ_IOP33X_XINT8 32
+#define IRQ_IOP33X_XINT9 33
+#define IRQ_IOP33X_XINT10 34
+#define IRQ_IOP33X_XINT11 35
+#define IRQ_IOP33X_XINT12 36
+#define IRQ_IOP33X_XINT13 37
+#define IRQ_IOP33X_XINT14 38
+#define IRQ_IOP33X_XINT15 39
+#define IRQ_IOP33X_UART0 51
+#define IRQ_IOP33X_UART1 52
+#define IRQ_IOP33X_PBIE 53
+#define IRQ_IOP33X_ATU_CRW 54
+#define IRQ_IOP33X_ATU_ERR 55
+#define IRQ_IOP33X_MCU_ERR 56
+#define IRQ_IOP33X_DMA0_ERR 57
+#define IRQ_IOP33X_DMA1_ERR 58
+#define IRQ_IOP33X_AA_ERR 60
+#define IRQ_IOP33X_MSG_ERR 62
+#define IRQ_IOP33X_HPI 63
+
+#define NR_IRQS 64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
new file mode 100644
index 0000000..2cef0bb
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) (__virt_to_phys(x))
+#define __bus_to_virt(x) (__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
new file mode 100644
index 0000000..7bf3bfb
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ *IOP3XX_PCSR = 0x30;
+
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop33x/time.h b/arch/arm/mach-iop33x/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/time.h
rename to arch/arm/mach-iop33x/include/mach/time.h
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
new file mode 100644
index 0000000..c757608
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 0000000..b42423f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+ uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ if (machine_is_iq80331() || machine_is_iq80332())
+ uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+ else
+ uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 0000000..f9f99de
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index e736c50..c7d99f9 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 75347a2..af616c5 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
/*
* IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 6ae1fac..abb4ea2 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
#include <linux/list.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index f11b86f..8c21870 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,7 +24,7 @@
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 7e810b3..a6a4f93 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 17af9f7..c62ed65 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
new file mode 100644
index 0000000..904ff56
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -0,0 +1,27 @@
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xc0000000 @ Physical base
+ movne \rx, #0xfe000000 @ virtual base
+ orrne \rx, \rx, #0x00f00000
+ orr \rx, \rx, #0x00030000
+#ifdef __ARMEB__
+ orr \rx, \rx, #0x00000003
+#endif
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
new file mode 100644
index 0000000..26063d6
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
new file mode 100644
index 0000000..9ce3690
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
+ *
+ * Register and other defines for Radisys ENP-2611
+ *
+ * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
+ * original version carries the following notices:
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ENP2611_H
+#define __ENP2611_H
+
+#define ENP2611_CALEB_PHYS_BASE 0xc5000000
+#define ENP2611_CALEB_VIRT_BASE 0xfe000000
+#define ENP2611_CALEB_SIZE 0x00100000
+
+#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000
+#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000
+#define ENP2611_PM3386_0_SIZE 0x00100000
+
+#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000
+#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000
+#define ENP2611_PM3386_1_SIZE 0x00100000
+
+#define ENP2611_GPIO_SCL 7
+#define ENP2611_GPIO_SDA 6
+
+#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4
+#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3
+#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2
+#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1
+#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
new file mode 100644
index 0000000..5850ffc
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \irqnr, #0x0 @clear out irqnr as default
+ mov \base, #0xfe000000
+ orr \base, \base, #0x00e00000
+ orr \base, \base, #0x08
+ ldr \irqstat, [\base] @ get interrupts
+
+ cmp \irqstat, #0
+ beq 1001f
+
+ clz \irqnr, \irqstat
+ mov \base, #31
+ subs \irqnr, \base, \irqnr
+
+ /*
+ * We handle PCIA and PCIB here so we don't have an
+ * extra layer of code just to check these two bits.
+ */
+ cmp \irqnr, #IRQ_IXP2000_PCI
+ bne 1001f
+
+ mov \base, #0xfe000000
+ orr \base, \base, #0x00c00000
+ orr \base, \base, #0x00000100
+ orr \base, \base, #0x00000058
+ ldr \irqstat, [\base]
+
+ mov \tmp, #(1<<26)
+ tst \irqstat, \tmp
+ movne \irqnr, #IRQ_IXP2000_PCIA
+ bne 1001f
+
+ mov \tmp, #(1<<27)
+ tst \irqstat, \tmp
+ movne \irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+ .endm
+
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
new file mode 100644
index 0000000..4a88d2c
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+#define IXP2000_GPIO_LOW 0
+#define IXP2000_GPIO_HIGH 1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+ return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+ if (value == IXP2000_GPIO_HIGH) {
+ ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+ } else if (value == IXP2000_GPIO_LOW) {
+ ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+ }
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
new file mode 100644
index 0000000..f033de4
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO 0x00000000
+#define PCIBIOS_MIN_MEM 0x00000000
+
+#include "ixp2000-regs.h" /* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h" /* ENP-2611 */
+#include "ixdp2x00.h" /* IXDP2400/2800 */
+#include "ixdp2x01.h" /* IXDP2401/2801 */
+
+#endif /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
new file mode 100644
index 0000000..859e584
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+#define __mem_pci(a) (a)
+
+/*
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions. This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
+ */
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
+
+#define outb(v,p) __raw_writeb((v),alignb(___io(p)))
+#define outw(v,p) __raw_writew((v),alignw(___io(p)))
+#define outl(v,p) __raw_writel((v),___io(p))
+
+#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p) \
+ ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p) \
+ ({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l) __raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l) __raw_readsl(___io(p),d,l)
+
+#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readb(alignb(p)); \
+ } else { \
+ __v = __raw_readb(p); \
+ } \
+ \
+ __v; \
+ }) \
+
+#define ioread16(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readw(alignw(p)); \
+ } else { \
+ __v = le16_to_cpu(__raw_readw(p)); \
+ } \
+ \
+ __v; \
+ })
+
+#define ioread32(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readl(p); \
+ } else { \
+ __v = le32_to_cpu(__raw_readl(p)); \
+ } \
+ \
+ __v; \
+ })
+
+#define iowrite8(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writeb((v), alignb(p)); \
+ } else { \
+ __raw_writeb((v), p); \
+ } \
+ })
+
+#define iowrite16(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writew((v), alignw(p)); \
+ } else { \
+ __raw_writew(cpu_to_le16(v), p); \
+ } \
+ })
+
+#define iowrite32(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writel((v), p); \
+ } else { \
+ __raw_writel(cpu_to_le32(v), p); \
+ } \
+ })
+
+#define ioport_map(port, nr) ___io(port)
+
+#define ioport_unmap(addr)
+#else
+#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
new file mode 100644
index 0000000..bee96bc
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */
+#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/
+#define IRQ_IXP2000_UART 2
+#define IRQ_IXP2000_GPIO 3
+#define IRQ_IXP2000_TIMER1 4
+#define IRQ_IXP2000_TIMER2 5
+#define IRQ_IXP2000_TIMER3 6
+#define IRQ_IXP2000_TIMER4 7
+#define IRQ_IXP2000_PMU 8
+#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */
+#define IRQ_IXP2000_DMA1 10
+#define IRQ_IXP2000_DMA2 11
+#define IRQ_IXP2000_DMA3 12
+#define IRQ_IXP2000_PCI_DOORBELL 13
+#define IRQ_IXP2000_ME_ATTN 14
+#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */
+#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */
+#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */
+#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */
+#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */
+#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */
+#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */
+#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */
+#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0 32
+#define IRQ_IXP2000_GPIO1 33
+#define IRQ_IXP2000_GPIO2 34
+#define IRQ_IXP2000_GPIO3 35
+#define IRQ_IXP2000_GPIO4 36
+#define IRQ_IXP2000_GPIO5 37
+#define IRQ_IXP2000_GPIO6 38
+#define IRQ_IXP2000_GPIO7 39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA 40
+#define IRQ_IXP2000_PCIB 41
+
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR 42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR 43
+#define IRQ_IXP2000_DRAM1_MIN_ERR 44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR 45
+#define IRQ_IXP2000_DRAM2_MIN_ERR 46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR 47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR 58
+#define IRQ_IXP2000_SRAM1_ERR 59
+#define IRQ_IXP2000_SRAM2_ERR 60
+#define IRQ_IXP2000_SRAM3_ERR 61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR 66
+#define IRQ_IXP2000_PCI_ERR 67
+#define IRQ_IXP2000_SP_INT 68
+
+#define NR_IXP2000_IRQS 69
+
+#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x))
+
+#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS))
+
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) )
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define IXP2000_BOARD_IRQS 32
+#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/*
+ * IXDP2400 specific IRQs
+ */
+#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7)
+
+#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1)
+#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5)
+
+#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1)
+#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/*
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/*
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1)
+
+#define IXDP2401_VALID_IRQ_MASK ( \
+ IXDP2X01_VALID_IRQ_MASK | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28)
+
+#define IXDP2801_VALID_IRQ_MASK ( \
+ IXDP2X01_VALID_IRQ_MASK | \
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+ IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
new file mode 100644
index 0000000..5df8479
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+ *
+ * Register and other defines for IXDP2[48]00 platforms
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _IXDP2X00_H_
+#define _IXDP2X00_H_
+
+/*
+ * On board CPLD memory map
+ */
+#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000
+#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000
+#define IXDP2X00_CPLD_SIZE 0x00100000
+
+
+#define IXDP2X00_CPLD_REG(x) \
+ (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
+
+/*
+ * IXDP2400 CPLD registers
+ */
+#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0)
+#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4)
+#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8)
+#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc)
+#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10)
+#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14)
+#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18)
+#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48)
+
+/*
+ * IXDP2800 CPLD registers
+ */
+#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0)
+#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140)
+
+
+#define IXDP2X00_GPIO_I2C_ENABLE 0x02
+#define IXDP2X00_GPIO_SCL 0x07
+#define IXDP2X00_GPIO_SDA 0x06
+
+/*
+ * PCI devfns for on-board devices. We need these to be able to
+ * properly translate IRQs and for device removal.
+ */
+#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */
+#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */
+#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */
+#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
+
+#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */
+#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */
+#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
+
+#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */
+#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */
+#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */
+#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */
+#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */
+
+#ifndef __ASSEMBLY__
+/*
+ * The master NPU is always PCI master.
+ */
+static inline unsigned int ixdp2x00_master_npu(void)
+{
+ return !!ixp2000_is_pcimaster();
+}
+
+/*
+ * Helper functions used by ixdp2400 and ixdp2800 specific code
+ */
+void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
+void ixdp2x00_slave_pci_postinit(void);
+void ixdp2x00_init_machine(void);
+void ixdp2x00_map_io(void);
+
+#endif
+
+#endif /*_IXDP2X00_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
new file mode 100644
index 0000000..4c1f040
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+ *
+ * Platform definitions for IXDP2X01 && IXDP2801 systems
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc.
+ *
+ * Based on original code Copyright (c) 2002-2003 Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __IXDP2X01_H__
+#define __IXDP2X01_H__
+
+#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000
+#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000
+#define IXDP2X01_CPLD_REGION_SIZE 0x00100000
+
+#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
+
+#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40)
+#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40)
+
+#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60)
+#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60)
+
+#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80)
+#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16)
+
+#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00)
+#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08)
+#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C)
+#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10)
+#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG
+#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14)
+
+#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20)
+
+#define IXDP2X01_CPLD_FLASH_INTERN 0x8000
+#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF
+#define IXDP2X01_FLASH_WINDOW_BITS 25
+#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS)
+#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1)
+
+#define IXDP2X01_UART_CLK 1843200
+
+#define IXDP2X01_GPIO_I2C_ENABLE 0x02
+#define IXDP2X01_GPIO_SCL 0x07
+#define IXDP2X01_GPIO_SDA 0x06
+
+#endif /* __IXDP2x01_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
new file mode 100644
index 0000000..19d8037
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -0,0 +1,457 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/*
+ * IXP2000 linux memory map:
+ *
+ * virt phys size
+ * fb000000 db000000 16M PCI CFG1
+ * fc000000 da000000 16M PCI CFG0
+ * fd000000 d8000000 16M PCI I/O
+ * fe[0-7]00000 8M per-platform mappings
+ * fe900000 80000000 1M SRAM #0 (first MB)
+ * fea00000 cb400000 1M SCRATCH ring get/put
+ * feb00000 c8000000 1M MSF
+ * fec00000 df000000 1M PCI CSRs
+ * fed00000 de000000 1M PCI CREG
+ * fee00000 d6000000 1M INTCTL
+ * fef00000 c0000000 1M CAP
+ */
+
+/*
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages. This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ * as required per erratum #66. We accomplish this by using a
+ * new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define IXP2000_CAP_PHYS_BASE 0xc0000000
+#define IXP2000_CAP_VIRT_BASE 0xfef00000
+#define IXP2000_CAP_SIZE 0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals.
+ */
+#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000
+#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000
+#define IXP2000_UART_PHYS_BASE 0xc0030000
+#define IXP2000_UART_VIRT_BASE 0xfef30000
+#define IXP2000_TIMER_VIRT_BASE 0xfef20000
+#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000
+#define IXP2000_GPIO_VIRT_BASE 0xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE 0xd6000000
+#define IXP2000_INTCTL_VIRT_BASE 0xfee00000
+#define IXP2000_INTCTL_SIZE 0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000
+#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000
+#define IXP2000_PCI_CREG_SIZE 0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000
+#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000
+#define IXP2000_PCI_CSR_SIZE 0x00100000
+
+#define IXP2000_MSF_PHYS_BASE 0xc8000000
+#define IXP2000_MSF_VIRT_BASE 0xfeb00000
+#define IXP2000_MSF_SIZE 0x00100000
+
+#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000
+#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000
+#define IXP2000_SCRATCH_RING_SIZE 0x00100000
+
+#define IXP2000_SRAM0_PHYS_BASE 0x80000000
+#define IXP2000_SRAM0_VIRT_BASE 0xfe900000
+#define IXP2000_SRAM0_SIZE 0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000
+#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000
+#define IXP2000_PCI_IO_SIZE 0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000
+#define IXP2000_PCI_CFG0_SIZE 0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000
+#define IXP2000_PCI_CFG1_SIZE 0x01000000
+
+/*
+ * Timers
+ */
+#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00)
+#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04)
+#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08)
+#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10)
+#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14)
+#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18)
+#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20)
+#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24)
+#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28)
+#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30)
+#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34)
+#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38)
+#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define IXP2000_TWDE IXP2000_TIMER_REG(0x40)
+
+#define WDT_ENABLE 0x00000001
+#define TIMER_DIVIDER_256 0x00000008
+#define TIMER_ENABLE 0x00000080
+#define IRQ_MASK_TIMER1 (1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define IXP2000_VALID_IRQ_MASK 0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */
+#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */
+#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */
+#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */
+
+#define IXP2000_PCI_RST_REL (1 << 2)
+#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST (1 << 2)
+#define CFG_BOOT_PROM (1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00)
+#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04)
+#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08)
+#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c)
+#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10)
+#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14)
+#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18)
+#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C)
+#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20)
+#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24)
+#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define SLOWPORT_CCR_DIV_1 0x00
+#define SLOWPORT_CCR_DIV_2 0x01
+#define SLOWPORT_CCR_DIV_4 0x02
+#define SLOWPORT_CCR_DIV_6 0x03
+#define SLOWPORT_CCR_DIV_8 0x04
+#define SLOWPORT_CCR_DIV_10 0x05
+#define SLOWPORT_CCR_DIV_12 0x06
+#define SLOWPORT_CCR_DIV_14 0x07
+#define SLOWPORT_CCR_DIV_16 0x08
+#define SLOWPORT_CCR_DIV_18 0x09
+#define SLOWPORT_CCR_DIV_20 0x0a
+#define SLOWPORT_CCR_DIV_22 0x0b
+#define SLOWPORT_CCR_DIV_24 0x0c
+#define SLOWPORT_CCR_DIV_26 0x0d
+#define SLOWPORT_CCR_DIV_28 0x0e
+#define SLOWPORT_CCR_DIV_30 0x0f
+
+/*
+ * PCR values. PCR configure the mode of the interface.
+ */
+#define SLOWPORT_MODE_FLASH 0x00
+#define SLOWPORT_MODE_LUCENT 0x01
+#define SLOWPORT_MODE_PMC_SIERRA 0x02
+#define SLOWPORT_MODE_INTEL_UP 0x03
+#define SLOWPORT_MODE_MOTOROLA_UP 0x04
+
+/*
+ * ADC values. Defines data and address bus widths.
+ */
+#define SLOWPORT_ADDR_WIDTH_8 0x00
+#define SLOWPORT_ADDR_WIDTH_16 0x01
+#define SLOWPORT_ADDR_WIDTH_24 0x02
+#define SLOWPORT_ADDR_WIDTH_32 0x03
+#define SLOWPORT_DATA_WIDTH_8 0x00
+#define SLOWPORT_DATA_WIDTH_16 0x10
+#define SLOWPORT_DATA_WIDTH_24 0x20
+#define SLOWPORT_DATA_WIDTH_32 0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define SLOWPORT_WRTC_MASK_HD 0x0003
+#define SLOWPORT_WRTC_MASK_PW 0x003c
+#define SLOWPORT_WRTC_MASK_SU 0x03c0
+
+#define SLOWPORT_WRTC_SHIFT_HD 0x00
+#define SLOWPORT_WRTC_SHIFT_SU 0x02
+#define SLOWPORT_WRTC_SHFIT_PW 0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000
+#define IXP2000_MAJ_REV_MASK 0x000000F0
+#define IXP2000_MIN_REV_MASK 0x0000000F
+#define IXP2000_PROD_ID_MASK 0xFFFFFFFF
+
+#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00)
+#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08)
+#define IXP2000_RESET0 GLOBAL_REG(0x0c)
+#define IXP2000_RESET1 GLOBAL_REG(0x10)
+#define IXP2000_CCR GLOBAL_REG(0x14)
+#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18)
+
+#define RSTALL (1 << 16)
+#define WDT_RESET_ENABLE 0x01000000
+
+
+/*
+ * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
+
+
+#endif /* _IXP2000_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
new file mode 100644
index 0000000..241529a
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#include <mach/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+ (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+ __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
new file mode 100644
index 0000000..42182c79
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+ return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+ *((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs. We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable. This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+ unsigned long dummy;
+
+ *((volatile unsigned long *)reg) = val;
+
+ dummy = *((volatile unsigned long *)reg);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of
+ * the slowport interface that each need different configuration
+ * settings. For example, the IXDP2400 uses channel 2 on the interface
+ * to access the CPLD, the switch fabric card, and the media card. Each
+ * one needs a different mode so drivers must save/restore the mode
+ * before and after each operation.
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.
+ */
+struct slowport_cfg {
+ unsigned long CCR; /* Clock divide */
+ unsigned long WTC; /* Write Timing Control */
+ unsigned long RTC; /* Read Timing Control */
+ unsigned long PCR; /* Protocol Control Register */
+ unsigned long ADC; /* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+ unsigned long id = *IXP2000_PRODUCT_ID;
+ unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+ IXP2000_MIN_PROD_TYPE_MASK);
+ return (((id_prod ==
+ /* fixed in IXP2400-B0 */
+ (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+ IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+ ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+ ((id_prod ==
+ /* fixed in IXP2800-B0 */
+ (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+ IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+ ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+ ((id_prod ==
+ /* fixed in IXP2850-B0 */
+ (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+ IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+ ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+ return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+ return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+ struct flash_platform_data *platform_data;
+ int nr_banks;
+ unsigned long (*bank_setup)(unsigned long);
+};
+
+struct ixp2000_i2c_pins {
+ unsigned long sda_pin;
+ unsigned long scl_pin;
+};
+
+
+#endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
new file mode 100644
index 0000000..2e9c68f
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ local_irq_disable();
+
+ /*
+ * Reset flash banking register so that we are pointing at
+ * RedBoot bank.
+ */
+ if (machine_is_ixdp2401()) {
+ ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+ ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+ | IXDP2X01_CPLD_FLASH_INTERN));
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+ }
+
+ /*
+ * On IXDP2801 we need to write this magic sequence to the CPLD
+ * to cause a complete reset of the CPU and all external devices
+ * and move the flash bank register back to 0.
+ */
+ if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
+ unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+ reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+ ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+ }
+
+ ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
new file mode 100644
index 0000000..835e659
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE 50000000
+
+
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
new file mode 100644
index 0000000..ce36308
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE 0xc0030000
+
+#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */
+#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/
+#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/
+#define UARTIER PHYS(0x04) /* Interrupt enable reg */
+#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/
+#define UARTLCR PHYS(0x0c) /* Control reg */
+#define UARTSR PHYS(0x14) /* Status reg */
+
+
+static inline void putc(int c)
+{
+ int j = 0x1000;
+
+ while (--j && !(*UARTSR & UART_LSR_THRE))
+ barrier();
+
+ *UARTDR = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
new file mode 100644
index 0000000..d195e35
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END 0xfb000000
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5f10687..c673b9e 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 4c0f0ee..6715b50 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index f378bae..5a781fd 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
/*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 739a9e0..78a2341 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index dd0eee2..03d916f 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index bc40cd4..68b4ac5 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,7 +32,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index b6cbefc..1c06bfc 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..905db31
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ mmu enabled?
+ ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
+ ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual
+#ifdef __ARMEB__
+ orr \rx, \rx, #0x00000003
+#endif
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 0000000..8886544
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..3f5338a
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+ ldr \irqnr, [\irqnr] @ get interrupt number
+ cmp \irqnr, #0x0 @ spurious interrupt ?
+ movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits
+ subne \irqnr, \irqnr, #1 @ convert to 0 based
+
+#if 0
+ cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+ bne 1001f
+ mov \irqnr, #IRQ_IXP23XX_INTA
+
+ ldr \irqnr, =0xf5000030
+
+ mov \tmp, #(1<<26)
+ tst \irqnr, \tmp
+ movne \irqnr, #IRQ_IXP23XX_INTB
+
+ mov \tmp, #(1<<27)
+ tst \irqnr, \tmp
+ movne \irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+ .endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
new file mode 100644
index 0000000..c319200
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO 0x00000000
+#define PCIBIOS_MIN_MEM 0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
new file mode 100644
index 0000000..305ea18
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a) (a)
+
+#include <linux/kernel.h> /* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+ if (addr >= IXP23XX_PCI_MEM_START &&
+ addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+ if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+ return NULL;
+
+ return (void __iomem *)
+ ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+ }
+
+ return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+ if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+ (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+ return;
+
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a) ixp23xx_iounmap(a)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
new file mode 100644
index 0000000..3af33a0
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */
+#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */
+#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS 120
+
+#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 32
+
+#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 0
+#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID 0x01FF
+#define IXDP2351_INTB_IRQ_NUM 16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 16
+#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
new file mode 100644
index 0000000..6639510
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE 0x00100000
+#define IXDP2351_NP_VIRT_BASE 0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE 0x01000000
+#define IXDP2351_BB_BASE_VIRT (0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE (0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */
+#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */
+#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C)
+ /* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
new file mode 100644
index 0000000..6d02481
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -0,0 +1,298 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt phys size
+ * fffd0000 a0000000 64K XSI2CPP_CSR
+ * fffc0000 c4000000 4K EXP_CFG
+ * fff00000 c8000000 64K PERIPHERAL
+ * fe000000 1c0000000 16M CAP_CSR
+ * fd000000 1c8000000 16M MSF_CSR
+ * fb000000 16M ---
+ * fa000000 1d8000000 32M PCI_IO
+ * f8000000 1da000000 32M PCI_CFG
+ * f6000000 1de000000 32M PCI_CREG
+ * f4000000 32M ---
+ * f0000000 1e0000000 64M PCI_MEM
+ * e[c-f]000000 per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS 0xc4000000
+#define IXP23XX_EXP_CFG_VIRT 0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE 0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS 0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT 0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE 0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT 0xfe000000
+#define IXP23XX_CAP_CSR_SIZE 0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT 0xfd000000
+#define IXP23XX_MSF_CSR_SIZE 0x01000000
+
+#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT 0xfa000000
+#define IXP23XX_PCI_IO_SIZE 0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT 0xf8000000
+#define IXP23XX_PCI_CFG_SIZE 0x02000000
+#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT 0xf6000000
+#define IXP23XX_PCI_CREG_SIZE 0x02000000
+#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START 0xe0000000
+#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT 0xf0000000
+#define IXP23XX_PCI_MEM_SIZE 0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF (1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE (0x2)
+#define IXP23XX_FLASH_BUS8 (0x1)
+
+#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30)
+#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34)
+
+#define IXP23XX_EXP_BUS_PHYS 0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK 0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE 3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e
+#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE (1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT (1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK (0x3)
+#define IXP23XX_TIMER_DISABLED (0x0)
+#define IXP23XX_TIMER1_INT_PEND (1 << 0)
+#define IXP23XX_TIMER2_INT_PEND (1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG (1 << 24)
+#define IXP23XX_SHPC_INIT_COMP (1 << 21)
+#define IXP23XX_RST_ALL (1 << 16)
+#define IXP23XX_RESET_PCI (1 << 2)
+#define IXP23XX_PCI_UNIT_RESET (1 << 1)
+#define IXP23XX_XSCALE_RESET (1 << 0)
+
+#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
new file mode 100644
index 0000000..9d40115
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET (0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v) \
+ ({ unsigned int ret; \
+ ret = ((__virt_to_phys(v) - 0x00000000) + \
+ (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \
+ ret; })
+
+#define __bus_to_virt(b) \
+ ({ unsigned int data; \
+ data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
+ __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent() 1
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
new file mode 100644
index 0000000..db9d941
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+ return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+ *((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+ *((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL 14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+ return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
new file mode 100644
index 0000000..d57c3fc
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+ if (!hlt_counter)
+ cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+ /* First try machine specific support */
+ if (machine_is_ixdp2351()) {
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+ (void) *IXDP2351_CPLD_RESET1_REG;
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+ }
+
+ /* Use on-chip reset capability */
+ *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 0000000..b61dafc
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
new file mode 100644
index 0000000..e341e9c
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
new file mode 100644
index 0000000..8b4c358
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+ int j;
+
+ for (j = 0; j < 0x1000; j++) {
+ if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..dd519f6
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END (0xec000000)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index d510160..b6e0bfa 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index c84cc6b..701d60a 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,7 +31,7 @@
#include <asm/sizes.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
extern int (*external_fault) (unsigned long, struct pt_regs *);
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index c461520..6d38d76 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 8d549da..08d65dc 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,7 +25,7 @@
#include <asm/mach/pci.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
void __init avila_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 87e38ca..797995c 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 3b32f70..192538a 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
#include <asm/sizes.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 00cede2..58bd284 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 6dd400f..efddf01 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,7 +20,7 @@
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 66acd55..aab1954 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 07ee00c..7e93a09 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,7 +23,7 @@
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 80044e8..59b73a0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 241bb5f..7b8a2c3 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index ef21bfb..25c21d6 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
/*
* Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
new file mode 100644
index 0000000..1640cb6
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define AVILA_SDA_PIN 7
+#define AVILA_SCL_PIN 6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV 4
+#define LOFT_PCI_MAX_DEV 6
+#define AVILA_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN 11
+#define AVILA_PCI_INTB_PIN 10
+#define AVILA_PCI_INTC_PIN 9
+#define AVILA_PCI_INTD_PIN 8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
new file mode 100644
index 0000000..717ac6d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define COYOTE_PCI_SLOT0_PIN 6
+#define COYOTE_PCI_SLOT1_PIN 11
+
+#define COYOTE_PCI_SLOT0_DEVID 14
+#define COYOTE_PCI_SLOT1_DEVID 15
+
+#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
+#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE 0x1000
+
+#define COYOTE_IDE_DATA_PORT 0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
new file mode 100644
index 0000000..ff8aa23
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
+ *
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+extern unsigned int processor_id;
+/* Processor id value in CP15 Register 0 */
+#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
+#define IXP435_PROCESSOR_ID_VALUE 0x69054040
+#define IXP465_PROCESSOR_ID_VALUE 0x69054200
+#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
+
+#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+ IXP425_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+ IXP435_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+ IXP465_PROCESSOR_ID_VALUE)
+
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+ unsigned int val = ~*IXP4XX_EXP_CFG2;
+ val &= ~IXP4XX_FEATURE_RESERVED;
+ if (!cpu_is_ixp46x())
+ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
+ return val;
+}
+
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+ *IXP4XX_EXP_CFG2 = ~value;
+}
+
+#endif /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..7c6a691
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xc8000000
+ movne \rx, #0xff000000
+ orrne \rx, \rx, #0x00b00000
+ add \rx,\rx,#3 @ Uart regs are at off set of 3 if
+ @ byte writes used - Big Endian.
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
new file mode 100644
index 0000000..00c5070
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/device.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
new file mode 100644
index 0000000..dc087a3
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -0,0 +1,52 @@
+/*
+ * DSM-G600 platform specific definitions
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ * Copyright 2004 (C) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define DSMG600_SDA_PIN 5
+#define DSMG600_SCL_PIN 4
+
+/*
+ * DSMG600 PCI IRQs
+ */
+#define DSMG600_PCI_MAX_DEV 4
+#define DSMG600_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define DSMG600_PCI_INTA_PIN 11
+#define DSMG600_PCI_INTB_PIN 10
+#define DSMG600_PCI_INTC_PIN 9
+#define DSMG600_PCI_INTD_PIN 8
+#define DSMG600_PCI_INTE_PIN 7
+#define DSMG600_PCI_INTF_PIN 6
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ 66000000
+
+/* Buttons */
+
+#define DSMG600_PB_GPIO 15 /* power button */
+#define DSMG600_RB_GPIO 3 /* reset button */
+
+/* Power control */
+
+#define DSMG600_PO_GPIO 2 /* power off */
+
+/* LEDs */
+
+#define DSMG600_LED_PWR_GPIO 0
+#define DSMG600_LED_WLAN_GPIO 14
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..f2e14e9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+ ldr \irqstat, [\irqstat] @ get interrupts
+ cmp \irqstat, #0
+ beq 1001f @ upper IRQ?
+ clz \irqnr, \irqstat
+ mov \base, #31
+ sub \irqnr, \base, \irqnr
+ b 1002f @ lower IRQ being
+ @ handled
+
+1001:
+ /*
+ * IXP465/IXP435 has an upper IRQ status register
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+ ldr \irqstat, [\irqstat] @ get upper interrupts
+ mov \irqnr, #63
+ clz \irqstat, \irqstat
+ cmp \irqstat, #32
+ subne \irqnr, \irqnr, \irqstat
+#endif
+1002:
+ .endm
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
new file mode 100644
index 0000000..1f02b7e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN 12
+#define FSG_SCL_PIN 13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV 3
+#define FSG_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN 6
+#define FSG_PCI_INTB_PIN 7
+#define FSG_PCI_INTC_PIN 5
+
+/* Buttons */
+
+#define FSG_SB_GPIO 4 /* sync button */
+#define FSG_RB_GPIO 9 /* reset button */
+#define FSG_UB_GPIO 10 /* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT 0
+#define FSG_LED_WAN_BIT 1
+#define FSG_LED_SATA_BIT 2
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
new file mode 100644
index 0000000..9fbde17
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
+ *
+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
+#define __ASM_ARCH_IXP4XX_GPIO_H
+
+#include <mach/hardware.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ return;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ gpio_line_config(gpio, IXP4XX_GPIO_IN);
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int level)
+{
+ gpio_line_set(gpio, level);
+ gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+ return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ int value;
+
+ gpio_line_get(gpio, &value);
+
+ return value;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ gpio_line_set(gpio, value);
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+extern int gpio_to_irq(int gpio);
+extern int irq_to_gpio(int gpio);
+
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
new file mode 100644
index 0000000..5d5e201
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0 0
+#define GTWX5715_GPIO1 1
+#define GTWX5715_GPIO2 2
+#define GTWX5715_GPIO3 3
+#define GTWX5715_GPIO4 4
+#define GTWX5715_GPIO5 5
+#define GTWX5715_GPIO6 6
+#define GTWX5715_GPIO7 7
+#define GTWX5715_GPIO8 8
+#define GTWX5715_GPIO9 9
+#define GTWX5715_GPIO10 10
+#define GTWX5715_GPIO11 11
+#define GTWX5715_GPIO12 12
+#define GTWX5715_GPIO13 13
+#define GTWX5715_GPIO14 14
+
+#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2
+
+/* PCI controller GPIO to IRQ pin mappings
+
+ INTA INTB
+SLOT 0 10 11
+SLOT 1 11 10
+
+*/
+
+#define GTWX5715_PCI_SLOT0_DEVID 0
+#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10
+#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11
+#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ
+#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ
+
+#define GTWX5715_PCI_SLOT1_DEVID 1
+#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11
+#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10
+#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ
+#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT 2
+#define GTWX5715_PCI_INT_PIN_COUNT 2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface. The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ
+
+/*
+ * Board Label Front Label
+ * LED1 Power
+ * LED2 Wireless-G
+ * LED3 not populated but could be
+ * LED4 Internet
+ * LED5 - LED8 Controlled by KS8995M Switch
+ * LED9 DMZ
+ */
+
+#define GTWX5715_LED1_GPIO GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO GTWX5715_GPIO4
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
new file mode 100644
index 0000000..f58a43a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses() 1
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+#ifndef __ASSEMBLER__
+#include <mach/cpu.h>
+#endif
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "avila.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+#include "nslu2.h"
+#include "nas100d.h"
+#include "dsmg600.h"
+#include "fsg.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
new file mode 100644
index 0000000..319948e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -0,0 +1,569 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <linux/bitops.h>
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ * To access PCI via this space, we simply ioremap() the BAR
+ * into the kernel and we can use the standard read[bwl]/write[bwl]
+ * macros. This is the preffered method due to speed but it
+ * limits the system to just 64MB of PCI memory. This can be
+ * problamatic if using video cards and other memory-heavy
+ * targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ * to use indirect registers to access PCI (as we do below for I/O
+ * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ * of memory on the bus. The disadvantage of this is that every
+ * PCI access requires three local register accesses plus a spinlock,
+ * but in some cases the performance hit is acceptable. In addition,
+ * you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a) (a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+{
+ if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+ return __arm_ioremap(addr, size, mtype);
+
+ return (void __iomem *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+ if ((__force u32)addr >= VMALLOC_START)
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __ixp4xx_iounmap(a)
+
+#define writeb(v, p) __ixp4xx_writeb(v, p)
+#define writew(v, p) __ixp4xx_writew(v, p)
+#define writel(v, p) __ixp4xx_writel(v, p)
+
+#define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
+#define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
+#define writesl(p, v, l) __ixp4xx_writesl(p, v, l)
+
+#define readb(p) __ixp4xx_readb(p)
+#define readw(p) __ixp4xx_readw(p)
+#define readl(p) __ixp4xx_readl(p)
+
+#define readsb(p, v, l) __ixp4xx_readsb(p, v, l)
+#define readsw(p, v, l) __ixp4xx_readsw(p, v, l)
+#define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
+
+static inline void
+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+{
+ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+ __raw_writeb(value, addr);
+ return;
+ }
+
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+{
+ while (count--)
+ writeb(*vaddr++, bus_addr);
+}
+
+static inline void
+__ixp4xx_writew(u16 value, volatile void __iomem *p)
+{
+ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+ __raw_writew(value, addr);
+ return;
+ }
+
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+{
+ while (count--)
+ writew(*vaddr++, bus_addr);
+}
+
+static inline void
+__ixp4xx_writel(u32 value, volatile void __iomem *p)
+{
+ u32 addr = (__force u32)p;
+ if (addr >= VMALLOC_START) {
+ __raw_writel(value, p);
+ return;
+ }
+
+ ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+{
+ while (count--)
+ writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char
+__ixp4xx_readb(const volatile void __iomem *p)
+{
+ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readb(addr);
+
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+ return 0xff;
+
+ return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short
+__ixp4xx_readw(const volatile void __iomem *p)
+{
+ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readw(addr);
+
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+ return 0xffff;
+
+ return data>>(8*n);
+}
+
+static inline void
+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long
+__ixp4xx_readl(const volatile void __iomem *p)
+{
+ u32 addr = (__force u32)p;
+ u32 data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readl(p);
+
+ if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+ return 0xffffffff;
+
+ return data;
+}
+
+static inline void
+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l) _memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
+
+#endif
+
+#ifndef CONFIG_PCI
+
+#define __io(v) v
+
+#else
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window. Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction. This means that we need to override the default
+ * I/O functions.
+ */
+#define outb(p, v) __ixp4xx_outb(p, v)
+#define outw(p, v) __ixp4xx_outw(p, v)
+#define outl(p, v) __ixp4xx_outl(p, v)
+
+#define outsb(p, v, l) __ixp4xx_outsb(p, v, l)
+#define outsw(p, v, l) __ixp4xx_outsw(p, v, l)
+#define outsl(p, v, l) __ixp4xx_outsl(p, v, l)
+
+#define inb(p) __ixp4xx_inb(p)
+#define inw(p) __ixp4xx_inw(p)
+#define inl(p) __ixp4xx_inl(p)
+
+#define insb(p, v, l) __ixp4xx_insb(p, v, l)
+#define insw(p, v, l) __ixp4xx_insw(p, v, l)
+#define insl(p, v, l) __ixp4xx_insl(p, v, l)
+
+
+static inline void
+__ixp4xx_outb(u8 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+ while (count--)
+ outb(*vaddr++, io_addr);
+}
+
+static inline void
+__ixp4xx_outw(u16 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+ while (count--)
+ outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void
+__ixp4xx_outl(u32 value, u32 addr)
+{
+ ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+ while (count--)
+ outl(*vaddr++, io_addr);
+}
+
+static inline u8
+__ixp4xx_inb(u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+ return 0xff;
+
+ return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = inb(io_addr);
+}
+
+static inline u16
+__ixp4xx_inw(u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+ return 0xffff;
+
+ return data>>(8*n);
+}
+
+static inline void
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32
+__ixp4xx_inl(u32 addr)
+{
+ u32 data;
+ if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+ return 0xffffffff;
+
+ return data;
+}
+
+static inline void
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = inl(io_addr);
+}
+
+#define PIO_OFFSET 0x10000UL
+#define PIO_MASK 0x0ffffUL
+
+#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
+ ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+static inline unsigned int
+__ixp4xx_ioread8(const void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ return (unsigned int)__ixp4xx_inb(port & PIO_MASK);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return (unsigned int)__raw_readb(port);
+#else
+ return (unsigned int)__ixp4xx_readb(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_insb(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsb(addr, vaddr, count);
+#else
+ __ixp4xx_readsb(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread16(const void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ return (unsigned int)__ixp4xx_inw(port & PIO_MASK);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return le16_to_cpu(__raw_readw((u32)port));
+#else
+ return (unsigned int)__ixp4xx_readw(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_insw(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsw(addr, vaddr, count);
+#else
+ __ixp4xx_readsw(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread32(const void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ return (unsigned int)__ixp4xx_inl(port & PIO_MASK);
+ else {
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return le32_to_cpu((__force __le32)__raw_readl(addr));
+#else
+ return (unsigned int)__ixp4xx_readl(addr);
+#endif
+ }
+}
+
+static inline void
+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_insl(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsl(addr, vaddr, count);
+#else
+ __ixp4xx_readsl(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outb(value, port & PIO_MASK);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writeb(value, port);
+#else
+ __ixp4xx_writeb(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesb(addr, vaddr, count);
+#else
+ __ixp4xx_writesb(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outw(value, port & PIO_MASK);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writew(cpu_to_le16(value), addr);
+#else
+ __ixp4xx_writew(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesw(addr, vaddr, count);
+#else
+ __ixp4xx_writesw(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outl(value, port & PIO_MASK);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writel((u32 __force)cpu_to_le32(value), addr);
+#else
+ __ixp4xx_writel(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+ __ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+ else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesl(addr, vaddr, count);
+#else
+ __ixp4xx_writesl(addr, vaddr, count);
+#endif
+}
+
+#define ioread8(p) __ixp4xx_ioread8(p)
+#define ioread16(p) __ixp4xx_ioread16(p)
+#define ioread32(p) __ixp4xx_ioread32(p)
+
+#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c)
+#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c)
+#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c)
+
+#define iowrite8(v,p) __ixp4xx_iowrite8(v,p)
+#define iowrite16(v,p) __ixp4xx_iowrite16(v,p)
+#define iowrite32(v,p) __ixp4xx_iowrite32(v,p)
+
+#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c)
+#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c)
+#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c)
+
+#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET))
+#define ioport_unmap(addr)
+#endif // !CONFIG_PCI
+
+#endif // __ASM_ARM_ARCH_IO_H
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
new file mode 100644
index 0000000..f4d74de
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA 0
+#define IRQ_IXP4XX_NPEB 1
+#define IRQ_IXP4XX_NPEC 2
+#define IRQ_IXP4XX_QM1 3
+#define IRQ_IXP4XX_QM2 4
+#define IRQ_IXP4XX_TIMER1 5
+#define IRQ_IXP4XX_GPIO0 6
+#define IRQ_IXP4XX_GPIO1 7
+#define IRQ_IXP4XX_PCI_INT 8
+#define IRQ_IXP4XX_PCI_DMA1 9
+#define IRQ_IXP4XX_PCI_DMA2 10
+#define IRQ_IXP4XX_TIMER2 11
+#define IRQ_IXP4XX_USB 12
+#define IRQ_IXP4XX_UART2 13
+#define IRQ_IXP4XX_TIMESTAMP 14
+#define IRQ_IXP4XX_UART1 15
+#define IRQ_IXP4XX_WDOG 16
+#define IRQ_IXP4XX_AHB_PMU 17
+#define IRQ_IXP4XX_XSCALE_PMU 18
+#define IRQ_IXP4XX_GPIO2 19
+#define IRQ_IXP4XX_GPIO3 20
+#define IRQ_IXP4XX_GPIO4 21
+#define IRQ_IXP4XX_GPIO5 22
+#define IRQ_IXP4XX_GPIO6 23
+#define IRQ_IXP4XX_GPIO7 24
+#define IRQ_IXP4XX_GPIO8 25
+#define IRQ_IXP4XX_GPIO9 26
+#define IRQ_IXP4XX_GPIO10 27
+#define IRQ_IXP4XX_GPIO11 28
+#define IRQ_IXP4XX_GPIO12 29
+#define IRQ_IXP4XX_SW_INT1 30
+#define IRQ_IXP4XX_SW_INT2 31
+#define IRQ_IXP4XX_USB_HOST 32
+#define IRQ_IXP4XX_I2C 33
+#define IRQ_IXP4XX_SSP 34
+#define IRQ_IXP4XX_TSYNC 35
+#define IRQ_IXP4XX_EAU_DONE 36
+#define IRQ_IXP4XX_SHA_DONE 37
+#define IRQ_IXP4XX_SWCP_PE 58
+#define IRQ_IXP4XX_QM_PE 60
+#define IRQ_IXP4XX_MCU_ECC 61
+#define IRQ_IXP4XX_EXP_PE 62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+#define NR_IRQS 64
+#else
+#define NR_IRQS 32
+#endif
+
+#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
+
+/*
+ * Gateworks Avila board IRQs
+ */
+#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
+
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6
+#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
+#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
+
+/*
+ * NSLU2 board IRQs
+ */
+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
+
+/*
+ * NAS100D board IRQs
+ */
+#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
+#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
+
+/*
+ * D-Link DSM-G600 RevA board IRQs
+ */
+#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
+#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
+#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
+
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
new file mode 100644
index 0000000..2cafe65
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define IXDP425_SDA_PIN 7
+#define IXDP425_SCL_PIN 6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV 4
+#define IXDP425_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN 11
+#define IXDP425_PCI_INTB_PIN 10
+#define IXDP425_PCI_INTC_PIN 9
+#define IXDP425_PCI_INTD_PIN 8
+
+/* NAND Flash pins */
+#define IXDP425_NAND_NCE_PIN 12
+
+#define IXDP425_NAND_CMD_BYTE 0x01
+#define IXDP425_NAND_ADDR_BYTE 0x02
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
new file mode 100644
index 0000000..ad9c888
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -0,0 +1,638 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains
+ * register location and bit definitions only. Platform specific
+ * definitions and helper function declarations are in platform.h
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy Size Virt Description
+ * =========================================================================
+ *
+ * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM
+ *
+ * 0x48000000 0x04000000 ioremap'd PCI Memory Space
+ *
+ * 0x50000000 0x10000000 ioremap'd EXP BUS
+ *
+ * 0x6000000 0x00004000 ioremap'd QMgr
+ *
+ * 0xC0000000 0x00001000 0xffbff000 PCI CFG
+ *
+ * 0xC4000000 0x00001000 0xffbfe000 EXP CFG
+ *
+ * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS (0x60000000)
+#define IXP4XX_QMGR_REGION_SIZE (0x00004000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
+#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
+#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000)
+#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
+
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000)
+#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000)
+#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
+
+#define IXP4XX_EXP_CS0_OFFSET 0x00
+#define IXP4XX_EXP_CS1_OFFSET 0x04
+#define IXP4XX_EXP_CS2_OFFSET 0x08
+#define IXP4XX_EXP_CS3_OFFSET 0x0C
+#define IXP4XX_EXP_CS4_OFFSET 0x10
+#define IXP4XX_EXP_CS5_OFFSET 0x14
+#define IXP4XX_EXP_CS6_OFFSET 0x18
+#define IXP4XX_EXP_CS7_OFFSET 0x1C
+#define IXP4XX_EXP_CFG0_OFFSET 0x20
+#define IXP4XX_EXP_CFG1_OFFSET 0x24
+#define IXP4XX_EXP_CFG2_OFFSET 0x28
+#define IXP4XX_EXP_CFG3_OFFSET 0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET)
+#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)
+#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET)
+#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET)
+#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET)
+#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+
+
+#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
+
+/*
+ * Constants to make it easy to access Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
+#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
+#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
+#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
+#define IXP4XX_GPIO_GPOER_OFFSET 0x04
+#define IXP4XX_GPIO_GPINR_OFFSET 0x08
+#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
+
+/*
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
+
+/*
+ * Mask used to clear interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR 0x7
+#define IXP4XX_GPIO_STYLE_SIZE 3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions
+ */
+#define IXP4XX_OST_ENABLE 0x00000001
+#define IXP4XX_OST_ONE_SHOT 0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK 0x00000003
+#define IXP4XX_OST_DISABLED 0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
+
+#define IXP4XX_WDT_KEY 0x0000482E
+
+#define IXP4XX_WDT_RESET_ENABLE 0x00000001
+#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
+#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET 0x00
+#define PCI_NP_CBE_OFFSET 0x04
+#define PCI_NP_WDATA_OFFSET 0x08
+#define PCI_NP_RDATA_OFFSET 0x0c
+#define PCI_CRP_AD_CBE_OFFSET 0x10
+#define PCI_CRP_WDATA_OFFSET 0x14
+#define PCI_CRP_RDATA_OFFSET 0x18
+#define PCI_CSR_OFFSET 0x1c
+#define PCI_ISR_OFFSET 0x20
+#define PCI_INTEN_OFFSET 0x24
+#define PCI_DMACTRL_OFFSET 0x28
+#define PCI_AHBMEMBASE_OFFSET 0x2c
+#define PCI_AHBIOBASE_OFFSET 0x30
+#define PCI_PCIMEMBASE_OFFSET 0x34
+#define PCI_AHBDOORBELL_OFFSET 0x38
+#define PCI_PCIDOORBELL_OFFSET 0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
+#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST 0x00000001
+#define PCI_CSR_ARBEN 0x00000002
+#define PCI_CSR_ADS 0x00000004
+#define PCI_CSR_PDS 0x00000008
+#define PCI_CSR_ABE 0x00000010
+#define PCI_CSR_DBT 0x00000020
+#define PCI_CSR_ASE 0x00000100
+#define PCI_CSR_IC 0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE 0x00000001
+#define PCI_ISR_PFE 0x00000002
+#define PCI_ISR_PPE 0x00000004
+#define PCI_ISR_AHBE 0x00000008
+#define PCI_ISR_APDC 0x00000010
+#define PCI_ISR_PADC 0x00000020
+#define PCI_ISR_ADB 0x00000040
+#define PCI_ISR_PDB 0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE 0x00000001
+#define PCI_INTEN_PFE 0x00000002
+#define PCI_INTEN_PPE 0x00000004
+#define PCI_INTEN_AHBE 0x00000008
+#define PCI_INTEN_APDC 0x00000010
+#define PCI_INTEN_PADC 0x00000020
+#define PCI_INTEN_ADB 0x00000040
+#define PCI_INTEN_PDB 0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL 4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL 20
+#define CRP_AD_CBE_WRITE 0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)
+/* UDC Control Register */
+#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)
+/* UDC Frame Number Register High */
+#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)
+/* UDC Frame Number Register Low */
+#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)
+/* UDC Byte Count Reg 2 */
+#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)
+/* UDC Byte Count Reg 4 */
+#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)
+/* UDC Byte Count Reg 7 */
+#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)
+/* UDC Byte Count Reg 9 */
+#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)
+/* UDC Byte Count Reg 12 */
+#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)
+/* UDC Byte Count Reg 14 */
+#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)
+/* UDC Endpoint 0 Data Register */
+#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)
+/* UDC Endpoint 1 Data Register */
+#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)
+/* UDC Endpoint 2 Data Register */
+#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)
+/* UDC Endpoint 3 Data Register */
+#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)
+/* UDC Endpoint 4 Data Register */
+#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)
+/* UDC Endpoint 5 Data Register */
+#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)
+/* UDC Endpoint 6 Data Register */
+#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)
+/* UDC Endpoint 7 Data Register */
+#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)
+/* UDC Endpoint 8 Data Register */
+#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)
+/* UDC Endpoint 9 Data Register */
+#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)
+/* UDC Endpoint 10 Data Register */
+#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)
+/* UDC Endpoint 11 Data Register */
+#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)
+/* UDC Endpoint 12 Data Register */
+#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)
+/* UDC Endpoint 13 Data Register */
+#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)
+/* UDC Endpoint 14 Data Register */
+#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)
+/* UDC Endpoint 15 Data Register */
+#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)
+/* UDC Interrupt Control Register 0 */
+#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)
+/* UDC Interrupt Control Register 1 */
+#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)
+/* UDC Status Interrupt Register 0 */
+#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)
+/* UDC Status Interrupt Register 1 */
+#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)
+
+#define UDCCR_UDE (1 << 0) /* UDC enable */
+#define UDCCR_UDA (1 << 1) /* UDC active */
+#define UDCCR_RSM (1 << 2) /* Device resume */
+#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
+#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
+#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
+#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
+
+#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
+#define UDCCS0_IPR (1 << 1) /* IN packet ready */
+#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
+#define UDCCS0_SST (1 << 4) /* Sent stall */
+#define UDCCS0_FST (1 << 5) /* Force stall */
+#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
+#define UDCCS0_SA (1 << 7) /* Setup active */
+
+#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_BI_SST (1 << 4) /* Sent stall */
+#define UDCCS_BI_FST (1 << 5) /* Force stall */
+#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
+
+#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_BO_DME (1 << 3) /* DMA enable */
+#define UDCCS_BO_SST (1 << 4) /* Sent stall */
+#define UDCCS_BO_FST (1 << 5) /* Force stall */
+#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
+
+#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
+
+#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
+#define UDCCS_IO_DME (1 << 3) /* DMA enable */
+#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
+
+#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_INT_SST (1 << 4) /* Sent stall */
+#define UDCCS_INT_FST (1 << 5) /* Force stall */
+#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
+
+#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
+#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
+#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
+#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
+#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
+#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
+#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
+#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
+
+#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
+#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
+#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
+#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
+#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
+#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
+#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
+#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
+
+#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
+
+#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
+
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/* "fuse" bits of IXP_EXP_CFG2 */
+#define IXP4XX_FEATURE_RCOMP (1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
+#define IXP4XX_FEATURE_HASH (1 << 2)
+#define IXP4XX_FEATURE_AES (1 << 3)
+#define IXP4XX_FEATURE_DES (1 << 4)
+#define IXP4XX_FEATURE_HDLC (1 << 5)
+#define IXP4XX_FEATURE_AAL (1 << 6)
+#define IXP4XX_FEATURE_HSS (1 << 7)
+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
+#define IXP4XX_FEATURE_PCI (1 << 14)
+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
+#define IXP4XX_FEATURE_RSA (1 << 21)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
+#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
+
+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
+ IXP4XX_FEATURE_USB_HOST | \
+ IXP4XX_FEATURE_NPEA_ETH | \
+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
+ IXP4XX_FEATURE_RSA | \
+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
new file mode 100644
index 0000000..c4d2830
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+ ixp4xx_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
new file mode 100644
index 0000000..3771d62
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
+ *
+ * NAS100D platform specific definitions
+ *
+ * Copyright (c) 2005 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NAS100D_SDA_PIN 5
+#define NAS100D_SCL_PIN 6
+
+/*
+ * NAS100D PCI IRQs
+ */
+#define NAS100D_PCI_MAX_DEV 3
+#define NAS100D_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NAS100D_PCI_INTA_PIN 11
+#define NAS100D_PCI_INTB_PIN 10
+#define NAS100D_PCI_INTC_PIN 9
+#define NAS100D_PCI_INTD_PIN 8
+#define NAS100D_PCI_INTE_PIN 7
+
+/* Buttons */
+
+#define NAS100D_PB_GPIO 14 /* power button */
+#define NAS100D_RB_GPIO 4 /* reset button */
+
+/* Power control */
+
+#define NAS100D_PO_GPIO 12 /* power off */
+
+/* LEDs */
+
+#define NAS100D_LED_WLAN_GPIO 0
+#define NAS100D_LED_DISK_GPIO 3
+#define NAS100D_LED_PWR_GPIO 15
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
similarity index 100%
rename from include/asm-arm/arch-ixp4xx/npe.h
rename to arch/arm/mach-ixp4xx/include/mach/npe.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
new file mode 100644
index 0000000..85d00ad
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NSLU2_SDA_PIN 7
+#define NSLU2_SCL_PIN 6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV 3
+#define NSLU2_PCI_IRQ_LINES 3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN 11
+#define NSLU2_PCI_INTB_PIN 10
+#define NSLU2_PCI_INTC_PIN 9
+#define NSLU2_PCI_INTD_PIN 8
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+
+#define NSLU2_PB_GPIO 5 /* power button */
+#define NSLU2_PO_GPIO 8 /* power off */
+#define NSLU2_RB_GPIO 12 /* reset button */
+
+/* Buzzer */
+
+#define NSLU2_GPIO_BUZZ 4
+
+/* LEDs */
+
+#define NSLU2_LED_RED_GPIO 0
+#define NSLU2_LED_GRN_GPIO 1
+#define NSLU2_LED_DISK1_GPIO 3
+#define NSLU2_LED_DISK2_GPIO 2
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
new file mode 100644
index 0000000..e824c02
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef __ARMEB__
+#define REG_OFFSET 0
+#else
+#define REG_OFFSET 3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
+
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define IXP4XX_EXP_BUS_BASE(region)\
+ (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+
+#define IXP4XX_EXP_BUS_END(region)\
+ (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
+
+#define IXP4XX_FLASH_WRITABLE (0x2)
+#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
+#define IXP4XX_FLASH_WRITE (0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
+#define IXP4XX_UART_XTAL 14745600
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+ volatile u32 *cs0_cfg;
+ volatile u32 *cs1_cfg;
+ unsigned long cs0_bits;
+ unsigned long cs1_bits;
+ void __iomem *cs0;
+ void __iomem *cs1;
+};
+
+struct sys_timer;
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+ int (*set_clock)(int port, unsigned int clock_type);
+ int (*open)(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier));
+ void (*close)(int port, void *pdev);
+ u8 txreadyq;
+};
+
+/*
+ * Frequency of clock used for primary clocksource
+ */
+extern unsigned long ixp4xx_timer_freq;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 0x1
+#define IXP4XX_GPIO_IN 0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW 0
+#define IXP4XX_GPIO_HIGH 1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0 14
+#define IXP4XX_GPIO_CLK_1 15
+
+static inline void gpio_line_config(u8 line, u32 direction)
+{
+ if (direction == IXP4XX_GPIO_IN)
+ *IXP4XX_GPIO_GPOER |= (1 << line);
+ else
+ *IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+ *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+ if (value == IXP4XX_GPIO_HIGH)
+ *IXP4XX_GPIO_GPOUTR |= (1 << line);
+ else if (value == IXP4XX_GPIO_LOW)
+ *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
new file mode 100644
index 0000000..17274a2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define PRPMC1100_PCI_MIN_DEVID 10
+#define PRPMC1100_PCI_MAX_DEVID 16
+#define PRPMC1100_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN 11
+#define PRPMC1100_PCI_INTB_PIN 10
+#define PRPMC1100_PCI_INTC_PIN 9
+#define PRPMC1100_PCI_INTD_PIN 8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
similarity index 100%
rename from include/asm-arm/arch-ixp4xx/qmgr.h
rename to arch/arm/mach-ixp4xx/include/mach/qmgr.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
new file mode 100644
index 0000000..92a7e8d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+ if (!hlt_counter)
+ cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+ if ( 1 && mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ /* Use on-chip reset capability */
+
+ /* set the "key" register to enable access to
+ * "timer" and "enable" registers
+ */
+ *IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+ /* write 0 to the timer register for an immediate reset */
+ *IXP4XX_OSWT = 0;
+
+ *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+ }
+}
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
new file mode 100644
index 0000000..89ce3ee
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
+ *
+ */
+
+#include <mach/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
+ */
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
new file mode 100644
index 0000000..80d6da2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
new file mode 100644
index 0000000..2db0078
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include "ixp4xx-regs.h"
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static inline void putc(int c)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+
+ *uart_base = c;
+}
+
+static void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ /*
+ * Some boards are using UART2 as console
+ */
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ machine_is_gateway7001() || machine_is_wg302v2())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..7b3580b
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (0xFF000000)
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 9ec9571..64c29aa 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,7 +22,7 @@
#include <asm/mach/pci.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
void __init ixdp425_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 8666a42..9b2d2ec 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index fac9e5c..4ed7ac6 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,7 +19,7 @@
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa..c73a94d 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
#define DEBUG_MSG 0
#define DEBUG_FW 0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94ea..c6cb069 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
#define DEBUG 0
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 0fd513a..9b59ed0 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,7 +23,7 @@
#include <linux/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index c426dcb..7ea7820 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 8a7ebe9..c79f492 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b..0e509b8 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -19,7 +19,7 @@
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
#include <asm/plat-orion/cache-feroceon-l2.h>
#include <asm/plat-orion/ehci-orion.h>
#include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c..610fb24 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 0000000..c0cc5b5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/kirkwood.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
+ ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-kirkwood/dma.h
rename to arch/arm/mach-kirkwood/include/mach/dma.h
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 0000000..83e0cba
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/kirkwood.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+ bne 1001f
+
+ @ if no low interrupts set, check high interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ mov \irqnr, #63
+ ands \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+1001: clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 0000000..cde8528
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
new file mode 100644
index 0000000..be07be0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+ + KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 0000000..6fd0583
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h" /* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM 0
+#define IRQ_KIRKWOOD_BRIDGE 1
+#define IRQ_KIRKWOOD_HOST2CPU 2
+#define IRQ_KIRKWOOD_CPU2HOST 3
+#define IRQ_KIRKWOOD_XOR_00 5
+#define IRQ_KIRKWOOD_XOR_01 6
+#define IRQ_KIRKWOOD_XOR_10 7
+#define IRQ_KIRKWOOD_XOR_11 8
+#define IRQ_KIRKWOOD_PCIE 9
+#define IRQ_KIRKWOOD_GE00_SUM 11
+#define IRQ_KIRKWOOD_GE01_SUM 15
+#define IRQ_KIRKWOOD_USB 19
+#define IRQ_KIRKWOOD_SATA 21
+#define IRQ_KIRKWOOD_CRYPTO 22
+#define IRQ_KIRKWOOD_SPI 23
+#define IRQ_KIRKWOOD_I2S 24
+#define IRQ_KIRKWOOD_TS_0 26
+#define IRQ_KIRKWOOD_SDIO 28
+#define IRQ_KIRKWOOD_TWSI 29
+#define IRQ_KIRKWOOD_AVB 30
+#define IRQ_KIRKWOOD_TDMI 31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0 33
+#define IRQ_KIRKWOOD_UART_1 34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 0000000..d1336b4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe I/O space
+ * f3000000 NAND controller address window
+ *
+ * virt phys size
+ * fee00000 f1000000 1M on-chip peripheral registers
+ * fef00000 f2000000 1M PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
+ * is the minimal window size
+ */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX 50
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
new file mode 100644
index 0000000..b5fb34b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
new file mode 100644
index 0000000..8510f6c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 0000000..f77ef4a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define KIRKWOOD_TCLK 166666667
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 0000000..75d5497
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 0000000..8f48260
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c..182230a 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -21,7 +21,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
#include "common.h"
#define RD88F6192_GPIO_USB_VBUS 10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index b6437f4..d8a4301 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -22,7 +22,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd..0468e93 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 97ab618..c6c08e8 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec6..4bd2514 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
#include <linux/platform_device.h>
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index a1e4643..3624e65 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
/*
* Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 0000000..3782c35
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KS8695_UART_PA @ physical base address
+ ldrne \rx, =KS8695_UART_VA @ virtual base address
+ .endm
+
+ .macro senduart, rd, rx
+ str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTE @ Holding & Shift registers empty?
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTHRE @ Holding Register empty?
+ beq 1001b
+ .endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 0000000..2744fec
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
+ /* PCI */
+#define KS8695_MODE_PCI 0
+#define KS8695_MODE_MINIPCI 1
+#define KS8695_MODE_CARDBUS 2
+
+struct ks8695_pci_cfg {
+ short mode;
+ int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 0000000..5612062
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 0000000..b4fe0c1
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
+
+ teq \irqstat, #0
+ beq 1001f
+
+ mov \irqnr, #0
+
+ tst \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tst \irqstat, #0x0f
+ moveq \irqstat, \irqstat, lsr #4
+ addeq \irqnr, \irqnr, #4
+ tst \irqstat, #0x03
+ moveq \irqstat, \irqstat, lsr #2
+ addeq \irqnr, \irqnr, #2
+ tst \irqstat, #0x01
+ addeqs \irqnr, \irqnr, #1
+1001:
+ .endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 0000000..73c8416
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0 0
+#define KS8695_GPIO_1 1
+#define KS8695_GPIO_2 2
+#define KS8695_GPIO_3 3
+#define KS8695_GPIO_4 4
+#define KS8695_GPIO_5 5
+#define KS8695_GPIO_6 6
+#define KS8695_GPIO_7 7
+#define KS8695_GPIO_8 8
+#define KS8695_GPIO_9 9
+#define KS8695_GPIO_10 10
+#define KS8695_GPIO_11 11
+#define KS8695_GPIO_12 12
+#define KS8695_GPIO_13 13
+#define KS8695_GPIO_14 14
+#define KS8695_GPIO_15 15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 0000000..1d640d0
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA 0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA 0x03F00000
+#define KS8695_IO_VA 0xF0000000
+#define KS8695_IO_SIZE SZ_1M
+
+#define KS8695_PCIMEM_PA 0x60000000
+#define KS8695_PCIMEM_SIZE SZ_512M
+
+#define KS8695_PCIIO_PA 0x80000000
+#define KS8695_PCIIO_SIZE SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0
+#define PCIBIOS_MIN_MEM 0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 0000000..f364f24
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 0000000..86fc9e6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS 32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX 0
+#define KS8695_IRQ_COMM_TX 1
+#define KS8695_IRQ_EXTERN0 2
+#define KS8695_IRQ_EXTERN1 3
+#define KS8695_IRQ_EXTERN2 4
+#define KS8695_IRQ_EXTERN3 5
+#define KS8695_IRQ_TIMER0 6
+#define KS8695_IRQ_TIMER1 7
+#define KS8695_IRQ_UART_TX 8
+#define KS8695_IRQ_UART_RX 9
+#define KS8695_IRQ_UART_LINE_STATUS 10
+#define KS8695_IRQ_UART_MODEM_STATUS 11
+#define KS8695_IRQ_LAN_RX_STOP 12
+#define KS8695_IRQ_LAN_TX_STOP 13
+#define KS8695_IRQ_LAN_RX_BUF 14
+#define KS8695_IRQ_LAN_TX_BUF 15
+#define KS8695_IRQ_LAN_RX_STATUS 16
+#define KS8695_IRQ_LAN_TX_STATUS 17
+#define KS8695_IRQ_HPNA_RX_STOP 18
+#define KS8695_IRQ_HPNA_TX_STOP 19
+#define KS8695_IRQ_HPNA_RX_BUF 20
+#define KS8695_IRQ_HPNA_TX_BUF 21
+#define KS8695_IRQ_HPNA_RX_STATUS 22
+#define KS8695_IRQ_HPNA_TX_STATUS 23
+#define KS8695_IRQ_BUS_ERROR 24
+#define KS8695_IRQ_WAN_RX_STOP 25
+#define KS8695_IRQ_WAN_TX_STOP 26
+#define KS8695_IRQ_WAN_RX_BUF 27
+#define KS8695_IRQ_WAN_TX_BUF 28
+#define KS8695_IRQ_WAN_RX_STATUS 29
+#define KS8695_IRQ_WAN_TX_STATUS 30
+#define KS8695_IRQ_WAN_LINK 31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 0000000..dadbe66
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
+ __phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
+ (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 0000000..0df6fe6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
+#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
+#define KS8695_IOPC (0x04) /* I/O Port Control Register */
+#define KS8695_IOPD (0x08) /* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x) ((x) << 12)
+#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x) ((x) << 8)
+#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x) ((x) << 4)
+#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x) ((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
+#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
+#define IOPC_TM_RISING (2) /* Rising Edge Detection */
+#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
+#define IOPC_TM_EDGE (6) /* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 0000000..815ce5c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
+#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 0000000..352b7e8
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
+#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC (0x00) /* Mode Control Register */
+#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
+#define KS8695_INTST (0x08) /* Interrupt Status Register */
+#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
+#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
+#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
+#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 0000000..9ef4099
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
+#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_LMAL (0x18) /* MAC Station Address Low */
+#define KS8695_LMAH (0x1c) /* MAC Station Address High */
+#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
+#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
+#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
+#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
+#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
+#define LMDTXC_LMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
+#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
+#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
+#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
+#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
+#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
+#define LMDRXC_LMRA (1 << 2) /* Receive All */
+#define LMDRXC_LMRE (1 << 1) /* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 0000000..55806bc
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
+#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
+#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
+#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
+#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
+#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
+#define KS8695_SDGCON (0x38) /* SDRAM General Control */
+#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
+#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
+#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
+#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
+#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
+#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
+#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
+#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
+#define PMC_NORMAL (0 << 0)
+#define PMC_4WORD (1 << 0)
+#define PMC_8WORD (2 << 0)
+#define PMC_16WORD (3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
+#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
+#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
+#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
+#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
+#define SDGCON_SDCAS (3 << 0) /* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
+#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
+#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
+#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
+#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 0000000..2740c52
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
+#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID (0x00) /* Device ID */
+#define KS8695_RID (0x04) /* Revision ID */
+#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
+#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
+#define KS8695_PPS (0x1c) /* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID (0xffff << 0) /* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID (0xf << 4) /* Sub-Device ID */
+#define RID_REVISION (0xf << 0) /* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS (1 << 1) /* Speed */
+#define HMC_HDS (1 << 0) /* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
+#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
+#define WMC_WANAP (1 << 28) /* Advertise Pause */
+#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
+#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
+#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
+#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
+#define WMC_WLS (1 << 23) /* Link status */
+#define WMC_WDS (1 << 22) /* Duplex status */
+#define WMC_WSS (1 << 21) /* Speed status */
+#define WMC_WLPP (1 << 20) /* Link Partner Pause */
+#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
+#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
+#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
+#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
+#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
+#define WMC_WANF100 (1 << 14) /* Force 100 */
+#define WMC_WANFF (1 << 13) /* Force FDX */
+#define WMC_WLED1S (7 << 4) /* LED1 Select */
+#define WLED1S_SPEED (0 << 4)
+#define WLED1S_LINK (1 << 4)
+#define WLED1S_DUPLEX (2 << 4)
+#define WLED1S_COLLISION (3 << 4)
+#define WLED1S_ACTIVITY (4 << 4)
+#define WLED1S_FDX_COLLISION (5 << 4)
+#define WLED1S_LINK_ACTIVITY (6 << 4)
+#define WMC_WLED0S (7 << 0) /* LED0 Select */
+#define WLED0S_SPEED (0 << 0)
+#define WLED0S_LINK (1 << 0)
+#define WLED0S_DUPLEX (2 << 0)
+#define WLED0S_COLLISION (3 << 0)
+#define WLED0S_ACTIVITY (4 << 0)
+#define WLED0S_FDX_COLLISION (5 << 0)
+#define WLED0S_LINK_ACTIVITY (6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK (1 << 14) /* Local Loopback */
+#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
+#define WPPM_WPI (1 << 12) /* PHY isolate */
+#define WPPM_WFL (1 << 10) /* Force link */
+#define WPPM_MDIXS (1 << 9) /* MDIX Status */
+#define WPPM_FEF (1 << 8) /* Far End Fault */
+#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
+#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
+#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
+#define WPPM_PD (1 << 4) /* Power Down */
+#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
+#define WPPM_FMDX (1 << 2) /* Force MDIX */
+#define WPPM_LPBK (1 << 1) /* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 0000000..75a9db6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
+#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID (0x000) /* Configuration: Identification */
+#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
+#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
+#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
+#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
+#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
+#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
+#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
+#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
+#define KS8695_PBM (0x200) /* Bridge Mode */
+#define KS8695_PBCS (0x204) /* Bridge Control and Status */
+#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
+#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
+#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
+#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST (1 << 23)
+
+#define PBCA_TYPE1 (1)
+#define PBCA_ENABLE (1 << 31)
+
+
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 0000000..56d12e8
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
+#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
+#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
+
+#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC (0x50) /* Indirect Access Control */
+#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
+#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
+#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
+#define KS8695_SEAFC (0x60) /* Advance Feature Control */
+#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
+#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
+#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
+#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
+#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S (7 << 25) /* LED1 Select */
+#define LLED1S_SPEED (0 << 25)
+#define LLED1S_LINK (1 << 25)
+#define LLED1S_DUPLEX (2 << 25)
+#define LLED1S_COLLISION (3 << 25)
+#define LLED1S_ACTIVITY (4 << 25)
+#define LLED1S_FDX_COLLISION (5 << 25)
+#define LLED1S_LINK_ACTIVITY (6 << 25)
+#define SEC0_LLED0S (7 << 22) /* LED0 Select */
+#define LLED0S_SPEED (0 << 22)
+#define LLED0S_LINK (1 << 22)
+#define LLED0S_DUPLEX (2 << 22)
+#define LLED0S_COLLISION (3 << 22)
+#define LLED0S_ACTIVITY (4 << 22)
+#define LLED0S_FDX_COLLISION (5 << 22)
+#define LLED0S_LINK_ACTIVITY (6 << 22)
+#define SEC0_ENABLE (1 << 0) /* Enable Switch */
+
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 0000000..57c20be
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
+#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG (0x00) /* System Configuration Register */
+#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
+#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 0000000..e620cda
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
+#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 0000000..8581fbc
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
+#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB (0x00) /* Receive Buffer Register */
+#define KS8695_URTH (0x04) /* Transmit Holding Register */
+#define KS8695_URFC (0x08) /* FIFO Control Register */
+#define KS8695_URLC (0x0C) /* Line Control Register */
+#define KS8695_URMC (0x10) /* Modem Control Register */
+#define KS8695_URLS (0x14) /* Line Status Register */
+#define KS8695_URMS (0x18) /* Modem Status Register */
+#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
+#define KS8695_USR (0x20) /* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
+#define URFC_URFRT_1 (0 << 6)
+#define URFC_URFRT_4 (1 << 6)
+#define URFC_URFRT_8 (2 << 6)
+#define URFC_URFRT_14 (3 << 6)
+#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
+#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
+#define URFC_URFE (1 << 0) /* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC (1 << 6) /* Set Break Condition */
+#define URLC_PARITY (7 << 3) /* Parity */
+#define URPE_NONE (0 << 3)
+#define URPE_ODD (1 << 3)
+#define URPE_EVEN (3 << 3)
+#define URPE_MARK (5 << 3)
+#define URPE_SPACE (7 << 3)
+#define URLC_URSB (1 << 2) /* Stop Bits */
+#define URLC_URCL (3 << 0) /* Character Length */
+#define URCL_5 (0 << 0)
+#define URCL_6 (1 << 0)
+#define URCL_7 (2 << 0)
+#define URCL_8 (3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB (1 << 4) /* Loop-back mode */
+#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
+#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
+#define URMC_URRTS (1 << 1) /* Request to Send */
+#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
+#define URLS_URTE (1 << 6) /* Transmit Empty */
+#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
+#define URLS_URBI (1 << 4) /* Break Interrupt */
+#define URLS_URFE (1 << 3) /* Framing Error */
+#define URLS_URPE (1 << 2) /* Parity Error */
+#define URLS_URROE (1 << 1) /* Receive Overrun Error */
+#define URLS_URDR (1 << 0) /* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
+#define URMS_URRI (1 << 6) /* Ring Indicator */
+#define URMS_URDSR (1 << 5) /* Data Set Ready */
+#define URMS_URCTS (1 << 4) /* Clear to Send */
+#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
+#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
+#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI (1 << 0) /* Timeout Indication */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 0000000..eb494ec
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
+#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_WMAL (0x18) /* MAC Station Address Low */
+#define KS8695_WMAH (0x1c) /* MAC Station Address High */
+#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
+#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
+#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
+#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
+#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
+#define WMDTXC_WMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
+#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
+#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
+#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
+#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
+#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
+#define WMDRXC_WMRA (1 << 2) /* Receive All */
+#define WMDRXC_WMRE (1 << 0) /* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 0000000..2a6f918
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks,
+ */
+ cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+ unsigned int reg;
+
+ if (mode == 's')
+ cpu_reset(0);
+
+ /* disable timer0 */
+ reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* enable watchdog mode */
+ __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+ /* re-enable timer0 */
+ __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 0000000..4682e35
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 0000000..0eee37a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+ barrier();
+
+ __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 0000000..744ac66
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 0773ae7..e5e71f4 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
static void ks8695_irq_mask(unsigned int irqno)
{
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 17c5ef1..184ef74 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index c0c2d59..1746c67 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
#include <asm/io.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b..940888d 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
#include <asm/io.h>
#include <asm/mach/time.h>
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
#include "generic.h"
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 8cec912..50d2324 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
#include <asm/types.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
new file mode 100644
index 0000000..4671558
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 08-02-2000 SJH Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <mach/hardware.h>
+
+#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR 0x00000000
+#define AUX_DIAG_LED_ON 0x00000002
+#define AUX_RTS_UART1 0x00000004
+#define AUX_DTR_UART1 0x00000008
+#define AUX_KBD_COLUMN_12_HIGH 0x00000010
+#define AUX_KBD_COLUMN_12_OFF 0x00000020
+#define AUX_KBD_COLUMN_13_HIGH 0x00000040
+#define AUX_KBD_COLUMN_13_OFF 0x00000080
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 0000000..34eed2a
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .equ io_virt, IO_BASE
+ .equ io_phys, IO_START
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #io_phys @ physical base address
+ movne \rx, #io_virt @ virtual address
+ add \rx, \rx, #0x00044000 @ UART1
+@ add \rx, \rx, #0x00045000 @ UART2
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0] @ UARTDR
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 0000000..c7e48bd
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 08-29-2000 SJH Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS 0xd0000000
+
+#define DMA_S0 0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 0000000..1726d91
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+ .equ irq_base_addr, IO_BASE_2
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov \irqstat, #irq_base_addr @ Virt addr IRQ regs
+ add \irqstat, \irqstat, #0x00001000 @ Status reg
+ ldr \irqstat, [\irqstat, #0] @ get interrupts
+ mov \irqnr, #0
+1001: tst \irqstat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \irqstat, \irqstat, lsr #1
+ tsteq \irqnr, #32
+ beq 1001b
+ teq \irqnr, #32
+ .endm
+
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
new file mode 100644
index 0000000..2b7086a
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 07-28-2000 SJH Created file
+ * 08-02-2000 SJH Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+ unsigned int TIMERLOAD;
+ unsigned int TIMERVALUE;
+ unsigned int TIMERCONTROL;
+ unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE (IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define GPT_PRESCALE_1 0x00000000
+#define GPT_PRESCALE_16 0x00000004
+#define GPT_PRESCALE_256 0x00000008
+#define GPT_MODE_FREERUN 0x00000000
+#define GPT_MODE_PERIODIC 0x00000040
+#define GPT_ENABLE 0x00000080
+#define GPT_BZTOG 0x00000100
+#define GPT_BZMOD 0x00000200
+#define GPT_LOAD_MASK 0x0000ffff
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 0000000..c7b0a5d
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ * arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * GPIO.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF 0x000
+#define PADDR_OFF 0x004
+#define PASBSR_OFF 0x008
+#define PAEENR_OFF 0x00c
+#define PAESNR_OFF 0x010
+#define PAESTR_OFF 0x014
+#define PAIMR_OFF 0x018
+#define PAINT_OFF 0x01c
+
+#define PBDR_OFF 0x020
+#define PBDDR_OFF 0x024
+#define PBSBSR_OFF 0x028
+#define PBIMR_OFF 0x038
+#define PBINT_OFF 0x03c
+
+#define PCDR_OFF 0x040
+#define PCDDR_OFF 0x044
+#define PCSBSR_OFF 0x048
+#define PCIMR_OFF 0x058
+#define PCINT_OFF 0x05c
+
+#define PDDR_OFF 0x060
+#define PDDDR_OFF 0x064
+#define PDSBSR_OFF 0x068
+#define PDEENR_OFF 0x06c
+#define PDESNR_OFF 0x070
+#define PDESTR_OFF 0x074
+#define PDIMR_OFF 0x078
+#define PDINT_OFF 0x07c
+
+#define PEDR_OFF 0x080
+#define PEDDR_OFF 0x084
+#define PESBSR_OFF 0x088
+#define PEEENR_OFF 0x08c
+#define PEESNR_OFF 0x090
+#define PEESTR_OFF 0x094
+#define PEIMR_OFF 0x098
+#define PEINT_OFF 0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN 0x02
+#define BACKLIGHT_EN 0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 0000000..c31909c
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ * 02-01-2000 RS Created L7200 version, derived from rpc code
+ * 03-21-2000 SJH Cleaned up file
+ * 04-21-2000 RS Changed mapping of I/O in virtual space
+ * 04-25-2000 SJH Removed unused symbols and such
+ * 05-05-2000 SJH Complete rewrite
+ * 07-31-2000 SJH Added undocumented debug auxillary port to
+ * get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_START 0xf0000000
+#define RAM_SIZE 0x02000000
+#define RAM_BASE 0xc0000000
+
+#define IO_START 0x80000000 /* I/O */
+#define IO_SIZE 0x01000000
+#define IO_BASE 0xd0000000
+
+#define IO_START_2 0x90000000 /* I/O */
+#define IO_SIZE_2 0x01000000
+#define IO_BASE_2 0xd1000000
+
+#define AUX_START 0x1a000000 /* AUX PORT */
+#define AUX_SIZE 0x01000000
+#define AUX_BASE 0xd2000000
+
+#define FLASH1_START 0x00000000 /* FLASH BANK 1 */
+#define FLASH1_SIZE 0x01000000
+#define FLASH1_BASE 0xd3000000
+
+#define FLASH2_START 0x10000000 /* FLASH BANK 2 */
+#define FLASH2_SIZE 0x01000000
+#define FLASH2_BASE 0xd4000000
+
+#define ISA_START 0x20000000 /* ISA */
+#define ISA_SIZE 0x20000000
+#define ISA_BASE 0xe0000000
+
+#define PCIO_BASE IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 0000000..d432ba9
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 03-21-2000 SJH Created from arch/arm/mach-nexuspci/include/mach/io.h
+ * 08-31-2000 SJH Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 0000000..7edffd7
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 01-02-2000 RS Create l7200 version
+ * 03-28-2000 SJH Removed unused interrupt
+ * 07-28-2000 SJH Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ * interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS 32
+
+#define IRQ_STWDOG 0 /* Watchdog timer */
+#define IRQ_PROG 1 /* Programmable interrupt */
+#define IRQ_DEBUG_RX 2 /* Comm Rx debug */
+#define IRQ_DEBUG_TX 3 /* Comm Tx debug */
+#define IRQ_GCTC1 4 /* Timer 1 */
+#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */
+#define IRQ_DMA 6 /* DMA controller */
+#define IRQ_CLCD 7 /* Color LCD controller */
+#define IRQ_SM_RX 8 /* Smart card */
+#define IRQ_SM_TX 9 /* Smart cart */
+#define IRQ_SM_RST 10 /* Smart card */
+#define IRQ_SIB 11 /* Serial Interface Bus */
+#define IRQ_MMC 12 /* MultiMediaCard */
+#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */
+#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */
+#define IRQ_SPI 15 /* SPI slave */
+#define IRQ_UART_1 16 /* UART 1 */
+#define IRQ_UART_2 17 /* UART 2 */
+#define IRQ_IRDA 18 /* IRDA */
+#define IRQ_RTC_TICK 19 /* Real Time Clock tick */
+#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */
+#define IRQ_GPIO 21 /* General Purpose IO */
+#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */
+#define IRQ_M2M 23 /* Memory to memory DMA */
+#define IRQ_RESERVED 24 /* RESERVED, don't use */
+#define IRQ_INTF 25 /* External active low interrupt */
+#define IRQ_INT0 26 /* External active low interrupt */
+#define IRQ_INT1 27 /* External active low interrupt */
+#define IRQ_INT2 28 /* External active low interrupt */
+#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO 30 /* Low batery or external power */
+#define IRQ_MEDIA_CHG 31 /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START 64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 0000000..f338cf3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ * 03-13-2000 SJH Created
+ * 04-13-2000 RS Changed bus macros for new addr
+ * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS 0x40000000
+#define FLUSH_BASE 0xdf000000
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
new file mode 100644
index 0000000..3959871
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ * arch/arm/mach-l7200/include/mach/pmpcon.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * DC/DC converter register.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */
+#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST 0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H)
+
+/* PMPCON = 0x811; // too light and fuzzy
+ * PMPCON = 0x844;
+ * PMPCON = 0x866; // better color poor depth
+ * PMPCON = 0x888; // Darker but better depth
+ * PMPCON = 0x899; // Darker even better depth
+ * PMPCON = 0x8aa; // too dark even better depth
+ * PMPCON = 0X8cc; // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
new file mode 100644
index 0000000..a2da7ae
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ * arch/arm/mach-l7200/include/mach/pmu.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * Power Management Unit (PMU).
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */
+#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+ unsigned int CURRENT; /* Current configuration register */
+ unsigned int NEXT; /* Next configuration register */
+ unsigned int reserved;
+ unsigned int RUN; /* Run configuration register */
+ unsigned int COMM; /* Configuration command register */
+ unsigned int SDRAM; /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg) ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg) ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg) ((reg >> 8) & 0x01)
+#define GET_PLLMUX(reg) ((reg >> 7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01)
+#define GET_FASTBUS(reg) (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */
+#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01)
+#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL 1<<25
+#define CHANGE_NOSTALL 2<<25
+#define CHANGE_STALL 3<<25
+
+#define INTRET 1<<17
+#define OSCEN 1<<16
+#define OSCMUX 1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0 0<<9 /* 3.6864 MHz */
+#define PLLMUL_1 1<<9 /* ?????? MHz */
+#define PLLMUL_5 5<<9 /* 18.432 MHz */
+#define PLLMUL_10 10<<9 /* 36.864 MHz */
+#define PLLMUL_18 18<<9 /* ?????? MHz */
+#define PLLMUL_20 20<<9 /* 73.728 MHz */
+#define PLLMUL_32 32<<9 /* ?????? MHz */
+#define PLLMUL_35 35<<9 /* 129.024 MHz */
+#define PLLMUL_36 36<<9 /* ?????? MHz */
+#define PLLMUL_39 39<<9 /* ?????? MHz */
+#define PLLMUL_40 40<<9 /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1 1<<18
+#define CRCLOCK_2 2<<18
+#define CRCLOCK_4 4<<18
+#define CRCLOCK_8 8<<18
+#define CRCLOCK_16 16<<18
+#define CRCLOCK_32 32<<18
+#define CRCLOCK_63 63<<18
+#define CRCLOCK_127 127<<18
+
+#define PLLEN 1<<8
+#define PLLMUX 1<<7
+#define SDR_STOP 1<<6
+#define SYSCLKEN 1<<5
+
+#define BCLK_DIV_4 2<<3
+#define BCLK_DIV_2 1<<3
+#define BCLK_DIV_1 0<<3
+
+#define SDRB_SEL 1<<2
+#define SDRF_SEL 1<<1
+#define FASTBUS 1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK 1<<1 /* Read-only */
+#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK 1<<3 /* Read-only */
+#define PICEN 1<<4 /* Enable Co-procesor */
+#define PICTEST 1<<5
+
+#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 0000000..adc05e5
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 03-20-2000 SJH Created
+ * 03-26-2000 SJH Added flags for serial ports
+ * 03-27-2000 SJH Corrected BASE_BAUD value
+ * 04-14-2000 RS Made register addr dependent on IO_BASE
+ * 05-03-2000 SJH Complete rewrite
+ * 05-09-2000 SJH Stripped out architecture specific serial stuff
+ * and placed it in a separate file
+ * 07-28-2000 SJH Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS \
+ /* MAGIC UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \
+ { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
new file mode 100644
index 0000000..645f1c5
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 05-09-2000 SJH Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <mach/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE (IO_BASE + 0x00044000)
+#define UART2_BASE (IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR 0x00 /* Tx/Rx data */
+#define RXSTAT 0x04 /* Rx status */
+#define H_UBRLCR 0x08 /* mode register high */
+#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
+#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
+#define UARTCON 0x14 /* control register */
+#define UARTFLG 0x18 /* flag register */
+#define UARTINTSTAT 0x1C /* FIFO IRQ status register */
+#define UARTINTMASK 0x20 /* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110 0x827
+#define BR_1200 0x06e
+#define BR_2400 0x05f
+#define BR_4800 0x02f
+#define BR_9600 0x017
+#define BR_14400 0x00f
+#define BR_19200 0x00b
+#define BR_38400 0x005
+#define BR_57600 0x003
+#define BR_76800 0x002
+#define BR_115200 0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR 0x00 /* No error */
+#define RXSTAT_FRM_ERR 0x01 /* Framing error */
+#define RXSTAT_PAR_ERR 0x02 /* Parity error */
+#define RXSTAT_OVR_ERR 0x04 /* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK 0x01 /* generate break on tx */
+#define UBRLCR_PEN 0x02 /* enable parity */
+#define UBRLCR_PDIS 0x00 /* disable parity */
+#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */
+#define UBRLCR_FIFO 0x10 /* enable FIFO */
+#define UBRLCR_LEN5 0x60 /* word length5 */
+#define UBRLCR_LEN6 0x40 /* word length6 */
+#define UBRLCR_LEN7 0x20 /* word length7 */
+#define UBRLCR_LEN8 0x00 /* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN 0x01 /* Enable UART */
+#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */
+#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */
+#define UARTFLG_UBUSY 0x08 /* Transmitter busy */
+#define UARTFLG_DCD 0x04 /* Data carrier detect */
+#define UARTFLG_DSR 0x02 /* Data set ready */
+#define UARTFLG_CTS 0x01 /* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT 0x01 /* TX interrupt */
+#define UART_RXINT 0x02 /* RX interrupt */
+#define UART_RXERRINT 0x04 /* RX error interrupt */
+#define UART_MSINT 0x08 /* Modem Status interrupt */
+#define UART_UDINT 0x10 /* UART Disabled interrupt */
+#define UART_ALLIRQS 0x1f /* All interrupts */
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
new file mode 100644
index 0000000..9657287
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ * arch/arm/mach-l7200/include/mach/sib.h
+ *
+ * Registers and helper functions for the Serial Interface Bus.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+ unsigned int MCCR; /* SIB Control Register Offset: 0x00 */
+ unsigned int RES1; /* Reserved Offset: 0x04 */
+ unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */
+ unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */
+ unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */
+ unsigned int RES2; /* Reserved Offset: 0x14 */
+ unsigned int MCSR; /* SIB Status Register Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ 9216000 /* Hertz */
+#define AUDIO_FREQ 5000 /* Hertz */
+#define TELECOM_FREQ 5000 /* Hertz */
+
+#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57 AUDIO_DIVIDE
+#define MCCR_TSD57 (TELECOM_DIVIDE << 8)
+#define MCCR_MCE (1 << 16) /* SIB enable */
+#define MCCR_ECS (1 << 17) /* External Clock Select */
+#define MCCR_ADM (1 << 18) /* A/D Data Sampling */
+#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */
+#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */
+#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE GET_CRC
+#define MCDR2_READ (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
new file mode 100644
index 0000000..2d7722b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ * arch/arm/mach-l7200/include/mach/sys-clock.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * System clocks.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
+#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+ unsigned int ENABLE;
+ unsigned int ESYNC;
+ unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN 1<<0
+#define B18M_EN 1<<1
+#define CLK3M6_EN 1<<2
+#define BUART_EN 1<<3
+#define CLK18MU_EN 1<<4
+#define FIR_EN 1<<5
+#define MIRN_EN 1<<6
+#define UARTM_EN 1<<7
+#define SIBADC_EN 1<<8
+#define ALTD_EN 1<<9
+#define CLCLK_EN 1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV 1<<0
+#define MIR_SEL 1<<1
+#define SSP_SEL 1<<4
+#define MM_DIV 1<<5
+#define MM_SEL 1<<6
+#define ADC_SEL_2 0<<7
+#define ADC_SEL_4 1<<7
+#define ADC_SEL_8 3<<7
+#define ADC_SEL_16 7<<7
+#define ADC_SEL_32 0x0f<<7
+#define ADC_SEL_64 0x1f<<7
+#define ADC_SEL_128 0x3f<<7
+#define ALTD_SEL 1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 0000000..5272abe
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ * 03-21-2000 SJH Created
+ * 04-26-2000 SJH Fixed functions
+ * 05-03-2000 SJH Removed usage of obsolete 'iomd.h'
+ * 05-31-2000 SJH Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+ if (mode == 's') {
+ cpu_reset(0);
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 0000000..061771c2
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 01-02-2000 RS Created l7200 version, derived from rpc code
+ * 05-03-2000 SJH Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE (IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32 0x00 /* 32 Hz tick */
+#define RTC_RATE_64 0x10 /* 64 Hz tick */
+#define RTC_RATE_128 0x20 /* 128 Hz tick */
+#define RTC_RATE_256 0x30 /* 256 Hz tick */
+#define RTC_EN_ALARM 0x01 /* Enable alarm */
+#define RTC_EN_TIC 0x04 /* Enable counter */
+#define RTC_EN_STWDOG 0x08 /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ do_timer(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ do_profile(regs);
+ RTC_RTCC = 0; /* Clear interrupt */
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+ RTC_RTCC = 0; /* Clear interrupt */
+
+ timer_irq.handler = timer_interrupt;
+
+ setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+ RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 0000000..ffc96a6
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000 RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ * must be changed when choosing a different tick
+ * rate. The value of HZ in 'param.h' must also
+ * be changed to match below.
+ */
+#define CLOCK_TICK_RATE 128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 0000000..591c962
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 05-01-2000 SJH Created
+ * 05-13-2000 SJH Filled in function bodies
+ * 07-26-2000 SJH Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART IO_START + 0x00044000
+
+#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p) (*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+ while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+ __raw_readb(IO_UART + 0x18) & 0x08)
+ barrier();
+
+ __raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+ __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */
+ __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */
+ __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 0000000..85f0abb
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index c794ca7..551b972 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index ff3109a..e373fb8 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 395ad9b..a2a5432 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -23,7 +23,7 @@
#include <asm/mach/irq.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 9fe7f3a..4fb23ac 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
*/
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
#include <linux/err.h>
struct module;
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
new file mode 100644
index 0000000..fe2e025
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
+ *
+ * Copyright (C) 2004 Marc Singer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned int fclkfreq_get (void);
+unsigned int hclkfreq_get (void);
+unsigned int pclkfreq_get (void);
+
+#endif /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
new file mode 100644
index 0000000..55c6edb
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -0,0 +1,91 @@
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ * Copyright (C) 2004 Logic Product Development
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CONSTANTS_H
+#define __ASM_ARCH_CONSTANTS_H
+
+
+/* Addressing constants */
+
+ /* SoC CPU IO addressing */
+#define IO_PHYS (0x80000000)
+#define IO_VIRT (0xf8000000)
+#define IO_SIZE (0x0000B000)
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_PHYS (0x20000000)
+# define CPLD_VIRT (0xf2000000)
+# define CPLD_SIZE PAGE_SIZE
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */
+# define IOBARRIER_VIRT 0xf0000000
+# define IOBARRIER_SIZE PAGE_SIZE
+
+# define CF_PHYS 0x60200000
+# define CF_VIRT 0xf6020000
+# define CF_SIZE (8*1024)
+
+ /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */
+# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20))
+# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16))
+# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */
+# define CPLD00_VIRT CPLDX_VIRT (0x00)
+# define CPLD00_SIZE PAGE_SIZE
+# define CPLD02_PHYS CPLDX_PHYS (0x02)
+# define CPLD02_VIRT CPLDX_VIRT (0x02)
+# define CPLD02_SIZE PAGE_SIZE
+# define CPLD06_PHYS CPLDX_PHYS (0x06)
+# define CPLD06_VIRT CPLDX_VIRT (0x06)
+# define CPLD06_SIZE PAGE_SIZE
+# define CPLD08_PHYS CPLDX_PHYS (0x08)
+# define CPLD08_VIRT CPLDX_VIRT (0x08)
+# define CPLD08_SIZE PAGE_SIZE
+# define CPLD0A_PHYS CPLDX_PHYS (0x0a)
+# define CPLD0A_VIRT CPLDX_VIRT (0x0a)
+# define CPLD0A_SIZE PAGE_SIZE
+# define CPLD0C_PHYS CPLDX_PHYS (0x0c)
+# define CPLD0C_VIRT CPLDX_VIRT (0x0c)
+# define CPLD0C_SIZE PAGE_SIZE
+# define CPLD0E_PHYS CPLDX_PHYS (0x0e)
+# define CPLD0E_VIRT CPLDX_VIRT (0x0e)
+# define CPLD0E_SIZE PAGE_SIZE
+# define CPLD10_PHYS CPLDX_PHYS (0x10)
+# define CPLD10_VIRT CPLDX_VIRT (0x10)
+# define CPLD10_SIZE PAGE_SIZE
+# define CPLD12_PHYS CPLDX_PHYS (0x12)
+# define CPLD12_VIRT CPLDX_VIRT (0x12)
+# define CPLD12_SIZE PAGE_SIZE
+# define CPLD14_PHYS CPLDX_PHYS (0x14)
+# define CPLD14_VIRT CPLDX_VIRT (0x14)
+# define CPLD14_SIZE PAGE_SIZE
+# define CPLD16_PHYS CPLDX_PHYS (0x16)
+# define CPLD16_VIRT CPLDX_VIRT (0x16)
+# define CPLD16_SIZE PAGE_SIZE
+# define CPLD18_PHYS CPLDX_PHYS (0x18)
+# define CPLD18_VIRT CPLDX_VIRT (0x18)
+# define CPLD18_SIZE PAGE_SIZE
+# define CPLD1A_PHYS CPLDX_PHYS (0x1a)
+# define CPLD1A_VIRT CPLDX_VIRT (0x1a)
+# define CPLD1A_SIZE PAGE_SIZE
+#endif
+
+ /* Timing constants */
+
+#define XTAL_IN 14745600 /* 14.7456 MHz crystal */
+#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */
+#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */
+#define HCLK (99993600)
+//#define HCLK (119808000)
+
+#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
new file mode 100644
index 0000000..85141ed
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ @ It is not known if this will be appropriate for every 40x
+ @ board.
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ mov \rx, #0x00000700 @ offset from base
+ orreq \rx, \rx, #0x80000000 @ physical base
+ orrne \rx, \rx, #0xf8000000 @ virtual base
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx] @ DATA
+ .endm
+
+ .macro busyuart,rd,rx @ spin while busy
+1001: ldr \rd, [\rx, #0x10] @ STATUS
+ tst \rd, #1 << 3 @ BUSY (TX FIFO not empty)
+ bne 1001b @ yes, spin
+ .endm
+
+ .macro waituart,rd,rx @ wait for Tx FIFO room
+1001: ldrb \rd, [\rx, #0x10] @ STATUS
+ tst \rd, #1 << 5 @ TXFF (TX FIFO full)
+ bne 1001b @ yes, spin
+ .endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
new file mode 100644
index 0000000..baa3f8d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -0,0 +1,86 @@
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Marc Singer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+typedef enum {
+ DMA_M2M0 = 0,
+ DMA_M2M1 = 1,
+ DMA_M2P0 = 2, /* Tx */
+ DMA_M2P1 = 3, /* Rx */
+ DMA_M2P2 = 4, /* Tx */
+ DMA_M2P3 = 5, /* Rx */
+ DMA_M2P4 = 6, /* Tx - AC97 */
+ DMA_M2P5 = 7, /* Rx - AC97 */
+ DMA_M2P6 = 8, /* Tx */
+ DMA_M2P7 = 9, /* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1 (1<<11)
+#define DMAC_GIR_MMI0 (1<<10)
+#define DMAC_GIR_MPI8 (1<<9)
+#define DMAC_GIR_MPI9 (1<<8)
+#define DMAC_GIR_MPI6 (1<<7)
+#define DMAC_GIR_MPI7 (1<<6)
+#define DMAC_GIR_MPI4 (1<<5)
+#define DMAC_GIR_MPI5 (1<<4)
+#define DMAC_GIR_MPI2 (1<<3)
+#define DMAC_GIR_MPI3 (1<<2)
+#define DMAC_GIR_MPI0 (1<<1)
+#define DMAC_GIR_MPI1 (1<<0)
+
+#define DMAC_M2P0 0x0000
+#define DMAC_M2P1 0x0040
+#define DMAC_M2P2 0x0080
+#define DMAC_M2P3 0x00c0
+#define DMAC_M2P4 0x0240
+#define DMAC_M2P5 0x0200
+#define DMAC_M2P6 0x02c0
+#define DMAC_M2P7 0x0280
+#define DMAC_M2P8 0x0340
+#define DMAC_M2P9 0x0300
+#define DMAC_M2M0 0x0100
+#define DMAC_M2M1 0x0140
+
+#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE (1<<4)
+
+#define DMAC_PORT_USB 0
+#define DMAC_PORT_SDMMC 1
+#define DMAC_PORT_AC97_1 2
+#define DMAC_PORT_AC97_2 3
+#define DMAC_PORT_AC97_3 4
+#define DMAC_PORT_UART1 6
+#define DMAC_PORT_UART2 7
+#define DMAC_PORT_UART3 8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT 4
+#define DMAC_PSTATUS_CURRSTATE_MASK 0x3
+
+#define DMAC_PSTATUS_NEXTBUF (1<<6)
+#define DMAC_PSTATUS_STALLRINT (1<<0)
+
+#define DMAC_INT_CHE (1<<3)
+#define DMAC_INT_NFB (1<<1)
+#define DMAC_INT_STALL (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
new file mode 100644
index 0000000..069bb4c
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+/* In order to allow there to be support for both of the processor
+ classes at the same time, we make a hack here that isn't very
+ pretty. At startup, the link pointed to with the
+ branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+ detected as a lh7a404.
+
+ *** FIXME: we should clean this up so that there is only one
+ implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+ mov \irqnr, #0 @ VIC1 irq base
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ add \base, \base, #0x8000
+ ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
+ ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
+ bne 1001f
+ add \base, \base, #(0xa000 - 0x8000)
+ ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
+ mov \irqnr, #32 @ VIC2 irq base
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
+1008: movs \irqstat, #1 @ Force !Z
+ str \tmp, [\base, #0x0030] @ Clear vector
+ b 1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000: mov \irqnr, #0
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ ldr \irqstat, [\base, #0x500] @ PIC INTSR
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1008: movs \irqstat, #1 @ Force !Z
+
+1009:
+ .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov \irqnr, #0
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ ldr \irqstat, [\base, #0x500] @ PIC INTSR
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1008: movs \irqstat, #1 @ Force !Z
+1009:
+ .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov \irqnr, #0 @ VIC1 irq base
+ mov \base, #io_p2v(0x80000000) @ APB registers
+ add \base, \base, #0x8000
+ ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
+ ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
+ bne 1001f
+ add \base, \base, #(0xa000 - 0x8000)
+ ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
+ tst \tmp, #VA_VECTORED @ Direct vectored
+ bne 1002f
+ ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
+ mov \irqnr, #32 @ VIC2 irq base
+
+1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
+ bcs 1008f @ Bit set; irq found
+ add \irqnr, \irqnr, #1
+ bne 1001b @ Until no bits
+ b 1009f @ Nothing? Hmm.
+1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
+1008: movs \irqstat, #1 @ Force !Z
+ str \tmp, [\base, #0x0030] @ Clear vector
+1009:
+ .endm
+#endif
+
+
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
new file mode 100644
index 0000000..48e827d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -0,0 +1,62 @@
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h> /* Added for the sake of amba-clcd driver */
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#else
+
+# if 0
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above, except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers. It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x) __REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x) __REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x) __REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y) \
+ ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+ : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x) (io_v2p((u32)&(x)))
+
+#endif
+
+#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s)
+
+#include "registers.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
new file mode 100644
index 0000000..031d26f
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-lh7a40x/include/mach/io.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
new file mode 100644
index 0000000..0f9b836
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -0,0 +1,200 @@
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ * Copyright (C) 2004 Logic Product Development
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board. For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define FIQ_START 80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+ /* FIQs */
+
+# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT 1 /* Battery Low */
+# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */
+# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */
+
+ /* IRQs */
+
+# define IRQ_CSINT 4 /* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI 8 /* Timer 1 underflow */
+# define IRQ_T2UI 9 /* Timer 2 underflow */
+# define IRQ_RTCMI 10
+# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR 12
+# define IRQ_UART2INTR 13
+# define IRQ_LCDINTR 14
+# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR 16
+# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */
+# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */
+# define IRQ_USBINTR 20
+# define IRQ_DMAINTR 21
+# define IRQ_T3UI 22 /* Timer 3 underflow */
+# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */
+
+ /* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i) ((i) \
+ - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+ - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN 0 /* Brownout */
+# define IRQ_WDTINTR 1 /* Watchdog Timer */
+# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */
+# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */
+# define IRQ_T1UI 4 /* Timer 1 underflow */
+# define IRQ_T2UI 5 /* Timer 2 underflow */
+# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1 8
+# define IRQ_DMAM2P2 9
+# define IRQ_DMAM2P3 10
+# define IRQ_DMAM2P4 11
+# define IRQ_DMAM2P5 12
+# define IRQ_DMAM2P6 13
+# define IRQ_DMAM2P7 14
+# define IRQ_DMAM2P8 15
+# define IRQ_DMAM2P9 16
+# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1 18
+# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR 20
+# define IRQ_GPIO2INTR 21
+# define IRQ_GPIO3INTR 22
+# define IRQ_SOFT_V1_23 23 /* -- Unassigned */
+# define IRQ_SOFT_V1_24 24
+# define IRQ_SOFT_V1_25 25
+# define IRQ_SOFT_V1_26 26
+# define IRQ_SOFT_V1_27 27
+# define IRQ_SOFT_V1_28 28
+# define IRQ_SOFT_V1_29 29
+# define IRQ_SOFT_V1_30 30
+# define IRQ_SOFT_V1_31 31
+
+# define IRQ_BLINT 32 /* Battery Low */
+# define IRQ_BMIINTR 33 /* Battery Monitor */
+# define IRQ_MCINTR 34 /* Media Change */
+# define IRQ_TINTR 35 /* 64Hz Tick */
+# define IRQ_WEINT 36 /* Watchdog Expired */
+# define IRQ_RTCMI 37 /* Real-time Clock Match */
+# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR 39 /* UART1 Error */
+# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR 41 /* UART2 Error */
+# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR 43 /* UART3 Error */
+# define IRQ_SCIINTR 44 /* Smart Card */
+# define IRQ_TSCINTR 45 /* Touchscreen */
+# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR 48
+# define IRQ_GPIO6INTR 49
+# define IRQ_GPIO7INTR 50
+# define IRQ_T3UI 51 /* Timer 3 underflow */
+# define IRQ_LCDINTR 52 /* LCD Controller */
+# define IRQ_SSPINTR 53 /* Synchronous Serial Port */
+# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */
+# define IRQ_USBINTR 55 /* USB Device Port */
+# define IRQ_USHINTR 56 /* USB Host Port */
+# define IRQ_SOFT_V2_25 57 /* -- Unassigned */
+# define IRQ_SOFT_V2_26 58
+# define IRQ_SOFT_V2_27 59
+# define IRQ_SOFT_V2_28 60
+# define IRQ_SOFT_V2_29 61
+# define IRQ_SOFT_V2_30 62
+# define IRQ_SOFT_V2_31 63
+
+# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */
+
+ /* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i) ((i) \
+ - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+ - IRQ_GPIO0INTR)
+
+ /* Vector Address constants */
+# define VA_VECTORED 0x100 /* Set for vectored interrupt */
+# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */
+
+#endif
+
+ /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK IRQ_TINTR
+#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */
+#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */
+#define IRQ_USB IRQ_USBINTR /* USB device */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */
+# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */
+# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */
+# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */
+#endif
+
+ /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD IRQ_BOARD_START
+# define NR_IRQ_BOARD 5
+# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */
+# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */
+# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START
+# define NR_IRQ_BOARD 2
+# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */
+# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH IRQ_LPD7A400_TS
+#endif
+
+#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
new file mode 100644
index 0000000..f7107b4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -0,0 +1,76 @@
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ *
+ * Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+# define KVADDR_TO_NID(addr) \
+ ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\
+ | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else /* 2 banks per node */
+# define KVADDR_TO_NID(addr) \
+ (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+# define PFN_TO_NID(pfn) \
+ (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else /* 2 banks per node */
+# define PFN_TO_NID(pfn) \
+ (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+# define LOCAL_MAP_NR(addr) \
+ (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else /* 2 banks per node */
+# define LOCAL_MAP_NR(addr) \
+ (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
new file mode 100644
index 0000000..ea44396
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -0,0 +1,224 @@
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ * Copyright (C) 2004 Logic Product Development
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#ifndef __ASM_ARCH_REGISTERS_H
+#define __ASM_ARCH_REGISTERS_H
+
+
+ /* Physical register base addresses */
+
+#define AC97C_PHYS (0x80000000) /* AC97 Controller */
+#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */
+#define USB_PHYS (0x80000200) /* USB Client */
+#define SCI_PHYS (0x80000300) /* Secure Card Interface */
+#define CSC_PHYS (0x80000400) /* Clock/State Controller */
+#define INTC_PHYS (0x80000500) /* Interrupt Controller */
+#define UART1_PHYS (0x80000600) /* UART1 Controller */
+#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */
+#define UART2_PHYS (0x80000700) /* UART2 Controller */
+#define UART3_PHYS (0x80000800) /* UART3 Controller */
+#define DCDC_PHYS (0x80000900) /* DC to DC Controller */
+#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */
+#define SSP_PHYS (0x80000b00) /* Synchronous ... */
+#define TIMER_PHYS (0x80000c00) /* Timer Controller */
+#define RTC_PHYS (0x80000d00) /* Real-time Clock */
+#define GPIO_PHYS (0x80000e00) /* General Purpose IO */
+#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */
+#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */
+#define WDT_PHYS (0x80001400) /* Watchdog Timer */
+#define SMC_PHYS (0x80002000) /* Static Memory Controller */
+#define SDRC_PHYS (0x80002400) /* SDRAM Controller */
+#define DMAC_PHYS (0x80002800) /* DMA Controller */
+#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */
+
+ /* Physical registers of the LH7A404 */
+
+#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */
+#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */
+#define USBH_PHYS (0x80009000) /* USB OHCI host controller */
+#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */
+
+/*#define KBD_PHYS (0x80000e00) */
+/*#define LCDICP_PHYS (0x80001000) */
+
+
+ /* Clock/State Controller register */
+
+#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */
+#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */
+
+#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */
+#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT (24)
+#define CSC_PWRSR_CHIPMAN_MASK (0xff)
+#define CSC_PWRSR_CHIPID_SHIFT (16)
+#define CSC_PWRSR_CHIPID_MASK (0xff)
+
+#define CSC_USBDRESET_APBRESETREG (1<<1)
+#define CSC_USBDRESET_IORESETREG (1<<0)
+
+ /* Interrupt Controller registers */
+
+#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */
+#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */
+#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */
+#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */
+
+
+ /* Vectored Interrupted Controller registers */
+
+#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00)
+#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04)
+#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08)
+#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c)
+#define VIC1_INTEN __REG(VIC1_PHYS + 0x10)
+#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14)
+#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18)
+#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c)
+#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20)
+#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30)
+#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34)
+#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100)
+#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200)
+#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00)
+#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04)
+#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08)
+#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c)
+#define VIC2_INTEN __REG(VIC2_PHYS + 0x10)
+#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14)
+#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18)
+#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c)
+#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20)
+#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30)
+#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34)
+#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100)
+#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200)
+
+#define VIC_CNTL_ENABLE (0x20)
+
+ /* USB Host registers (Open HCI compatible) */
+
+#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08)
+
+
+ /* GPIO registers */
+
+#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */
+#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */
+#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */
+#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */
+#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */
+#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD __REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD __REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD __REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD __REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD __REG(GPIO_PHYS + 0x24)
+#define GPIO_PED __REG(GPIO_PHYS + 0x20)
+
+
+ /* Static Memory Controller registers */
+
+#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */
+#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */
+#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */
+#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */
+#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */
+#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */
+
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */
+# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */
+# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
+# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
+# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
+# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */
+# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08)
+# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08)
+# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a)
+# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a)
+# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c)
+# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
+
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define CPLD_CONTROL __REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA __REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS)
+# define CPLD_FLASH __REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS)
+# define CPLD_REVISION __REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS)
+
+#endif
+
+ /* Timer registers */
+
+#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
+#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
+#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
+#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
+
+#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
+#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
+#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
+#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
+
+#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
+
+#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
+#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
+#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
+#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
+
+#define TIMER_C_ENABLE (1<<7)
+#define TIMER_C_PERIODIC (1<<6)
+#define TIMER_C_FREERUNNING (0)
+#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */
+#define TIMER_C_508KHZ (0x08)
+
+ /* GPIO registers */
+
+#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */
+#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */
+#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */
+#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */
+#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */
+#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */
+#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */
+
+
+#endif /* _ASM_ARCH_REGISTERS_H */
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
similarity index 100%
rename from include/asm-arm/arch-lh7a40x/ssp.h
rename to arch/arm/mach-lh7a40x/include/mach/ssp.h
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
new file mode 100644
index 0000000..fa46bb1e
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-lh7a40x/include/mach/system.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset (0);
+}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
new file mode 100644
index 0000000..08028ce
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#define CLOCK_TICK_RATE (PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE 3686400
+*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
new file mode 100644
index 0000000..55b80d4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA (0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS (0x10)
+#endif
+#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */
+
+ /* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static inline void putc(int ch)
+{
+ while (UART_STATUS & nTxRdy)
+ barrier();
+ UART_DATA = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+ /* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
new file mode 100644
index 0000000..3fbd494
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+#define VMALLOC_END (0xe8000000)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 0e5a805..1ad3afc 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include "common.h"
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index f3293bf..12b045b 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include "common.h"
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 41bf9f8..0d5063eb 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include "common.h"
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index 4cd31bb..51fbef9 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
//#define TALK
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index 1c7e469..7fe9e06 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
#include <linux/irq.h>
#include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 3b6319d..70ca56b 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include "common.h"
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f503..e20cdbc 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,7 +18,7 @@
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
#include <asm/plat-orion/orion_nand.h>
#include <asm/plat-orion/time.h>
#include "common.h"
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
new file mode 100644
index 0000000..a8c20bd
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-loki/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/loki.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =LOKI_REGS_PHYS_BASE
+ ldrne \rx, =LOKI_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-loki/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-loki/include/mach/dma.h
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
new file mode 100644
index 0000000..332af38
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-loki/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/loki.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #IRQ_CAUSE_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_OFF]
+ mov \irqnr, #0
+ ands \irqstat, \irqstat, \tmp
+ clzne \irqnr, \irqstat
+ rsbne \irqnr, \irqnr, #31
+ .endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
new file mode 100644
index 0000000..d7bfc8f
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-loki/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
new file mode 100644
index 0000000..a373cd5
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-loki/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+ + LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
new file mode 100644
index 0000000..9fbd332
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-loki/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h" /* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL 0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL 1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL 2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL 3
+#define IRQ_LOKI_COM_A_ERR 6
+#define IRQ_LOKI_COM_A_IN 7
+#define IRQ_LOKI_COM_A_OUT 8
+#define IRQ_LOKI_COM_B_ERR 9
+#define IRQ_LOKI_COM_B_IN 10
+#define IRQ_LOKI_COM_B_OUT 11
+#define IRQ_LOKI_DMA_A 12
+#define IRQ_LOKI_DMA_B 13
+#define IRQ_LOKI_SAS_A 14
+#define IRQ_LOKI_SAS_B 15
+#define IRQ_LOKI_DDR 16
+#define IRQ_LOKI_XOR 17
+#define IRQ_LOKI_BRIDGE 18
+#define IRQ_LOKI_PCIE_A_ERR 20
+#define IRQ_LOKI_PCIE_A_INT 21
+#define IRQ_LOKI_PCIE_B_ERR 22
+#define IRQ_LOKI_PCIE_B_INT 23
+#define IRQ_LOKI_GBE_A_INT 24
+#define IRQ_LOKI_GBE_B_INT 25
+#define IRQ_LOKI_DEV_ERR 26
+#define IRQ_LOKI_UART0 27
+#define IRQ_LOKI_UART1 28
+#define IRQ_LOKI_TWSI 29
+#define IRQ_LOKI_GPIO_23_0 30
+#define IRQ_LOKI_GPIO_25_24 31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START 32
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
new file mode 100644
index 0000000..c00af6b
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-loki/include/mach/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000 on-chip peripheral registers
+ * e0000000 PCIe 0 Memory space
+ * e8000000 PCIe 1 Memory space
+ * f0000000 PCIe 0 I/O space
+ * f0100000 PCIe 1 I/O space
+ *
+ * virt phys size
+ * fed00000 d0000000 1M on-chip peripheral registers
+ * fee00000 f0000000 64K PCIe 0 I/O space
+ * fef00000 f0100000 64K PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE 0xd0000000
+#define LOKI_REGS_VIRT_BASE 0xfed00000
+#define LOKI_REGS_SIZE SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE0_IO_SIZE SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE 0x00000000
+#define LOKI_PCIE1_IO_SIZE SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define LOKI_PCIE0_MEM_SIZE SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define LOKI_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x) (DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX 8
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
new file mode 100644
index 0000000..a39533a
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-loki/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
new file mode 100644
index 0000000..8db1147
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-loki/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/loki.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
new file mode 100644
index 0000000..9df2109
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-loki/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define LOKI_TCLK 180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
new file mode 100644
index 0000000..90b2a7e
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-loki/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/loki.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 0000000..8dc3bfc
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e..2cc9ac9 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
#include "common.h"
#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 4646021..995afc4a 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
#include <linux/platform_device.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
#include <asm/io.h>
#include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d336..3a51136 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
struct flash_platform_data msm_nand_data = {
.parts = 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339..9de0826 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
#include <asm/io.h>
#include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#define MSM_DMOV_CHANNEL_COUNT 16
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f..6a94f05 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
*
* Idle processing for MSM7K - work around bugs with SWFI.
*
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
new file mode 100644
index 0000000..a763949
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-msm/include/mach/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+ void (*panel_power)(int on);
+ unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
new file mode 100644
index 0000000..528eef4
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+ .macro addruart,rx
+ @ see if the MMU is enabled and select appropriate base address
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =MSM_UART1_PHYS
+ ldrne \rx, =MSM_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0C]
+ .endm
+
+ .macro waituart,rd,rx
+ @ wait for TX_READY
+1: ldr \rd, [\rx, #0x08]
+ tst \rd, #0x04
+ beq 1b
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
new file mode 100644
index 0000000..ad1c87f
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/mach-msm/include/mach/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <mach/msm_iomap.h>
+
+struct msm_dmov_cmd {
+ struct list_head list;
+ unsigned int cmdptr;
+ void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
+
+#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR (1 << 3)
+#define DMOV_RSLT_FLUSH (1 << 2)
+#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
+#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
+
+#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
+
+#define DMOV_ISR DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
+#define DMOV_CONFIG_IRQ_EN (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN 7
+#define DMOV_NAND_CRCI_CMD 5
+#define DMOV_NAND_CRCI_DATA 4
+
+#define DMOV_SDC1_CHAN 8
+#define DMOV_SDC1_CRCI 6
+
+#define DMOV_SDC2_CHAN 8
+#define DMOV_SDC2_CRCI 7
+
+#define DMOV_TSIF_CHAN 10
+#define DMOV_TSIF_CRCI 10
+
+#define DMOV_USB_CHAN 11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI 0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below. Each
+ * pointer points to a *array* of dmov_s, etc structs. The last pointer
+ * in the list is marked with CMD_PTR_LP. The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr) ((addr) >> 3)
+#define CMD_PTR_LP (1 << 31) /* last pointer */
+#define CMD_PTR_PT (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src;
+ unsigned dst;
+ unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src_dscr;
+ unsigned dst_dscr;
+ unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC (1 << 31) /* last command */
+#define CMD_FR (1 << 22) /* force result -- does not work? */
+#define CMD_OCU (1 << 21) /* other channel unblock */
+#define CMD_OCB (1 << 20) /* other channel block */
+#define CMD_TCB (1 << 19) /* ? */
+#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
+#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG (1 << 0) /* untested */
+#define CMD_MODE_IND_SG (2 << 0) /* untested */
+#define CMD_MODE_BOX (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n) (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
new file mode 100644
index 0000000..d225948
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
new file mode 100644
index 0000000..2d12609
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-msm/include/mach/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
new file mode 100644
index 0000000..c6a2feb
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-msm/include/mach/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
new file mode 100644
index 0000000..9dd4cf8
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -0,0 +1,90 @@
+/* arch/arm/mach-msm/include/mach/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221 */
+
+#define INT_A9_M2A_0 0
+#define INT_A9_M2A_1 1
+#define INT_A9_M2A_2 2
+#define INT_A9_M2A_3 3
+#define INT_A9_M2A_4 4
+#define INT_A9_M2A_5 5
+#define INT_A9_M2A_6 6
+#define INT_GP_TIMER_EXP 7
+#define INT_DEBUG_TIMER_EXP 8
+#define INT_UART1 9
+#define INT_UART2 10
+#define INT_UART3 11
+#define INT_UART1_RX 12
+#define INT_UART2_RX 13
+#define INT_UART3_RX 14
+#define INT_USB_OTG 15
+#define INT_MDDI_PRI 16
+#define INT_MDDI_EXT 17
+#define INT_MDDI_CLIENT 18
+#define INT_MDP 19
+#define INT_GRAPHICS 20
+#define INT_ADM_AARM 21
+#define INT_ADSP_A11 22
+#define INT_ADSP_A9_A11 23
+#define INT_SDC1_0 24
+#define INT_SDC1_1 25
+#define INT_SDC2_0 26
+#define INT_SDC2_1 27
+#define INT_KEYSENSE 28
+#define INT_TCHSCRN_SSBI 29
+#define INT_TCHSCRN1 30
+#define INT_TCHSCRN2 31
+
+#define INT_GPIO_GROUP1 (32 + 0)
+#define INT_GPIO_GROUP2 (32 + 1)
+#define INT_PWB_I2C (32 + 2)
+#define INT_SOFTRESET (32 + 3)
+#define INT_NAND_WR_ER_DONE (32 + 4)
+#define INT_NAND_OP_DONE (32 + 5)
+#define INT_PBUS_ARM11 (32 + 6)
+#define INT_AXI_MPU_SMI (32 + 7)
+#define INT_AXI_MPU_EBI1 (32 + 8)
+#define INT_AD_HSSD (32 + 9)
+#define INT_ARM11_PMU (32 + 10)
+#define INT_ARM11_DMA (32 + 11)
+#define INT_TSIF_IRQ (32 + 12)
+#define INT_UART1DM_IRQ (32 + 13)
+#define INT_UART1DM_RX (32 + 14)
+#define INT_USB_HS (32 + 15)
+#define INT_SDC3_0 (32 + 16)
+#define INT_SDC3_1 (32 + 17)
+#define INT_SDC4_0 (32 + 18)
+#define INT_SDC4_1 (32 + 19)
+#define INT_UART2DM_RX (32 + 20)
+#define INT_UART2DM_IRQ (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
new file mode 100644
index 0000000..63fd47f
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-msm/include/mach/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
new file mode 100644
index 0000000..e221f58
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -0,0 +1,104 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough. Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE 0xE0000000
+#define MSM_VIC_PHYS 0xC0000000
+#define MSM_VIC_SIZE SZ_4K
+
+#define MSM_CSR_BASE 0xE0001000
+#define MSM_CSR_PHYS 0xC0100000
+#define MSM_CSR_SIZE SZ_4K
+
+#define MSM_GPT_PHYS MSM_CSR_PHYS
+#define MSM_GPT_BASE MSM_CSR_BASE
+#define MSM_GPT_SIZE SZ_4K
+
+#define MSM_DMOV_BASE 0xE0002000
+#define MSM_DMOV_PHYS 0xA9700000
+#define MSM_DMOV_SIZE SZ_4K
+
+#define MSM_UART1_BASE 0xE0003000
+#define MSM_UART1_PHYS 0xA9A00000
+#define MSM_UART1_SIZE SZ_4K
+
+#define MSM_UART2_BASE 0xE0004000
+#define MSM_UART2_PHYS 0xA9B00000
+#define MSM_UART2_SIZE SZ_4K
+
+#define MSM_UART3_BASE 0xE0005000
+#define MSM_UART3_PHYS 0xA9C00000
+#define MSM_UART3_SIZE SZ_4K
+
+#define MSM_I2C_BASE 0xE0006000
+#define MSM_I2C_PHYS 0xA9900000
+#define MSM_I2C_SIZE SZ_4K
+
+#define MSM_GPIO1_BASE 0xE0007000
+#define MSM_GPIO1_PHYS 0xA9200000
+#define MSM_GPIO1_SIZE SZ_4K
+
+#define MSM_GPIO2_BASE 0xE0008000
+#define MSM_GPIO2_PHYS 0xA9300000
+#define MSM_GPIO2_SIZE SZ_4K
+
+#define MSM_HSUSB_BASE 0xE0009000
+#define MSM_HSUSB_PHYS 0xA0800000
+#define MSM_HSUSB_SIZE SZ_4K
+
+#define MSM_CLK_CTL_BASE 0xE000A000
+#define MSM_CLK_CTL_PHYS 0xA8600000
+#define MSM_CLK_CTL_SIZE SZ_4K
+
+#define MSM_PMDH_BASE 0xE000B000
+#define MSM_PMDH_PHYS 0xAA600000
+#define MSM_PMDH_SIZE SZ_4K
+
+#define MSM_EMDH_BASE 0xE000C000
+#define MSM_EMDH_PHYS 0xAA700000
+#define MSM_EMDH_SIZE SZ_4K
+
+#define MSM_MDP_BASE 0xE0010000
+#define MSM_MDP_PHYS 0xAA200000
+#define MSM_MDP_SIZE 0x000F0000
+
+#define MSM_SHARED_RAM_BASE 0xE0100000
+#define MSM_SHARED_RAM_PHYS 0x01F00000
+#define MSM_SHARED_RAM_SIZE SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
new file mode 100644
index 0000000..f05ad2e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-msm/include/mach/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+ for (;;) ; /* depends on IPC w/ other core */
+}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
new file mode 100644
index 0000000..a62e6b2
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-msm/include/mach/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
new file mode 100644
index 0000000..026e895
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-msm/include/mach/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
new file mode 100644
index 0000000..05f81fd
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-msm/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index eca4283..5976200 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
#include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#define MSM_DEVICE(name) { \
.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 0535b39..66901ba 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
#include <linux/timer.h>
#include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
#define VIC_REG(off) (MSM_VIC_BASE + (off))
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d..9f02d7d 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
#include <linux/delay.h>
#include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b..e633f9c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,7 +17,7 @@
#include <linux/ata_platform.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
#include <asm/plat-orion/cache-feroceon-l2.h>
#include <asm/plat-orion/ehci-orion.h>
#include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19..a2d0c97 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
new file mode 100644
index 0000000..a06442f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/mv78xx0.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MV78XX0_REGS_PHYS_BASE
+ ldrne \rx, =MV78XX0_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-mv78xx0/include/mach/dma.h
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
new file mode 100644
index 0000000..ed4a46b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/mv78xx0.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
new file mode 100644
index 0000000..5d88755
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
new file mode 100644
index 0000000..450e0e1
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+ + MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
new file mode 100644
index 0000000..995d7fb
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h" /* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR 0
+#define IRQ_MV78XX0_SPI 1
+#define IRQ_MV78XX0_I2C_0 2
+#define IRQ_MV78XX0_I2C_1 3
+#define IRQ_MV78XX0_IDMA_0 4
+#define IRQ_MV78XX0_IDMA_1 5
+#define IRQ_MV78XX0_IDMA_2 6
+#define IRQ_MV78XX0_IDMA_3 7
+#define IRQ_MV78XX0_TIMER_0 8
+#define IRQ_MV78XX0_TIMER_1 9
+#define IRQ_MV78XX0_TIMER_2 10
+#define IRQ_MV78XX0_TIMER_3 11
+#define IRQ_MV78XX0_UART_0 12
+#define IRQ_MV78XX0_UART_1 13
+#define IRQ_MV78XX0_UART_2 14
+#define IRQ_MV78XX0_UART_3 15
+#define IRQ_MV78XX0_USB_0 16
+#define IRQ_MV78XX0_USB_1 17
+#define IRQ_MV78XX0_USB_2 18
+#define IRQ_MV78XX0_CRYPTO 19
+#define IRQ_MV78XX0_SDIO_0 20
+#define IRQ_MV78XX0_SDIO_1 21
+#define IRQ_MV78XX0_XOR_0 22
+#define IRQ_MV78XX0_XOR_1 23
+#define IRQ_MV78XX0_I2S_0 24
+#define IRQ_MV78XX0_I2S_1 25
+#define IRQ_MV78XX0_SATA 26
+#define IRQ_MV78XX0_TDMI 27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00 32
+#define IRQ_MV78XX0_PCIE_01 33
+#define IRQ_MV78XX0_PCIE_02 34
+#define IRQ_MV78XX0_PCIE_03 35
+#define IRQ_MV78XX0_PCIE_10 36
+#define IRQ_MV78XX0_PCIE_11 37
+#define IRQ_MV78XX0_PCIE_12 38
+#define IRQ_MV78XX0_PCIE_13 39
+#define IRQ_MV78XX0_GE00_SUM 40
+#define IRQ_MV78XX0_GE00_RX 41
+#define IRQ_MV78XX0_GE00_TX 42
+#define IRQ_MV78XX0_GE00_MISC 43
+#define IRQ_MV78XX0_GE01_SUM 44
+#define IRQ_MV78XX0_GE01_RX 45
+#define IRQ_MV78XX0_GE01_TX 46
+#define IRQ_MV78XX0_GE01_MISC 47
+#define IRQ_MV78XX0_GE10_SUM 48
+#define IRQ_MV78XX0_GE10_RX 49
+#define IRQ_MV78XX0_GE10_TX 50
+#define IRQ_MV78XX0_GE10_MISC 51
+#define IRQ_MV78XX0_GE11_SUM 52
+#define IRQ_MV78XX0_GE11_RX 53
+#define IRQ_MV78XX0_GE11_TX 54
+#define IRQ_MV78XX0_GE11_MISC 55
+#define IRQ_MV78XX0_GPIO_0_7 56
+#define IRQ_MV78XX0_GPIO_8_15 57
+#define IRQ_MV78XX0_GPIO_16_23 58
+#define IRQ_MV78XX0_GPIO_24_31 59
+#define IRQ_MV78XX0_DB_IN 60
+#define IRQ_MV78XX0_DB_OUT 61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START 64
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
new file mode 100644
index 0000000..9e47a14
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
new file mode 100644
index 0000000..ad66417
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ * MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000 PCIe Memory space
+ * f0800000 PCIe #0 I/O space
+ * f0900000 PCIe #1 I/O space
+ * f0a00000 PCIe #2 I/O space
+ * f0b00000 PCIe #3 I/O space
+ * f0c00000 PCIe #4 I/O space
+ * f0d00000 PCIe #5 I/O space
+ * f0e00000 PCIe #6 I/O space
+ * f0f00000 PCIe #7 I/O space
+ * f1000000 on-chip peripheral registers
+ *
+ * virt phys size
+ * fe400000 f102x000 16K core-specific peripheral registers
+ * fe700000 f0800000 1M PCIe #0 I/O space
+ * fe800000 f0900000 1M PCIe #1 I/O space
+ * fe900000 f0a00000 1M PCIe #2 I/O space
+ * fea00000 f0b00000 1M PCIe #3 I/O space
+ * feb00000 f0c00000 1M PCIe #4 I/O space
+ * fec00000 f0d00000 1M PCIe #5 I/O space
+ * fed00000 f0e00000 1M PCIe #6 I/O space
+ * fee00000 f0f00000 1M PCIe #7 I/O space
+ * fef00000 f1000000 1M on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_SIZE SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE 0xf1000000
+#define MV78XX0_REGS_VIRT_BASE 0xfef00000
+#define MV78XX0_REGS_SIZE SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE 0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
+#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
+#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
+#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
+#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX 32
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
new file mode 100644
index 0000000..7d51794
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
new file mode 100644
index 0000000..0e8c443
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
new file mode 100644
index 0000000..3652642
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/mv78xx0.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 0000000..1c49543
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4..3198abf 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
#include <asm/plat-orion/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4af6f4f..c69896d 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,8 +22,8 @@
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
#include <asm/div64.h>
#include "crm_regs.h"
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index 33f81f2..239308f 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
#include <linux/io.h>
#include <linux/module.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "crm_regs.h"
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b9..94644cd 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/* Register offsets */
#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index b5d2b63..bd0559d 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/*
* Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 4de97e1..dea6521 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
#include <linux/mm.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 64c7bf6..4ce56ef 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/arch/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ebe9726..1028f45 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
#include <linux/mtd/physmap.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
#include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
/*
* Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 165d54a..a560cd6 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,7 +17,7 @@
*/
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/arch.h>
/*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 58dda23..e31fd44 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
static struct resource uart0[] = {
{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 9930464..7b82697 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f36359..9f14a87 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
#include <asm/div64.h>
#include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cdd0ff9..e08c6a8 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
static struct resource uart0[] = {
{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index e189a5f..3dda1fe 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
/*
* IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 881b356..30d842b 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
#include <linux/mm.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
/*!
* @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 63df8b0..60fb4e0 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
/*!
* @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 03384a7..d363a6e 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
#include <linux/kernel.h>
#include <linux/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
/*
* This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1bb4ead..0a152ed 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
#include <linux/mtd/physmap.h>
#include <linux/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index e169b68..24c7965 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
struct clk {};
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 798ac6e..1b40483 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <asm/hardware/vic.h>
#include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
#include <asm/mach/irq.h>
static struct map_desc netx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
new file mode 100644
index 0000000..11b9d5b
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-netx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x00100000 @ physical
+ movne \rx, #io_p2v(0x00100000) @ virtual
+ orr \rx, \rx, #0x00000a00
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x18]
+ tst \rd, #(1 << 3)
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18]
+ tst \rd, #(1 << 3)
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
new file mode 100644
index 0000000..690b3eb
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-netx/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
new file mode 100644
index 0000000..a1952a0
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-netx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hilscher netX based platforms
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <mach/hardware.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov \base, #io_p2v(0x00100000)
+ add \base, \base, #0x000ff000
+
+ ldr \irqstat, [\base, #0]
+ clz \irqnr, \irqstat
+ rsb \irqnr, \irqnr, #31
+ cmp \irqstat, #0
+ .endm
+
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h
new file mode 100644
index 0000000..88af1ac
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+ unsigned int xcno; /* number of xmac/xpec engine this eth uses */
+};
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
new file mode 100644
index 0000000..517a2bd
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-netx/include/mach/hardware.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define NETX_IO_PHYS 0x00100000
+#define NETX_IO_VIRT 0xe0000000
+#define NETX_IO_SIZE 0x00100000
+
+#define SRAM_INTERNAL_PHYS_0 0x00000
+#define SRAM_INTERNAL_PHYS_1 0x08000
+#define SRAM_INTERNAL_PHYS_2 0x10000
+#define SRAM_INTERNAL_PHYS_3 0x18000
+#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
+
+#define XPEC_MEM_SIZE 0x4000
+#define XMAC_MEM_SIZE 0x1000
+#define SRAM_MEM_SIZE 0x8000
+
+#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
+#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
new file mode 100644
index 0000000..468b92a
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-netx/include/mach/io.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
new file mode 100644
index 0000000..6ce914d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-netx/include/mach/irqs.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define NETX_IRQ_VIC_START 0
+#define NETX_IRQ_SOFTINT 0
+#define NETX_IRQ_TIMER0 1
+#define NETX_IRQ_TIMER1 2
+#define NETX_IRQ_TIMER2 3
+#define NETX_IRQ_SYSTIME_NS 4
+#define NETX_IRQ_SYSTIME_S 5
+#define NETX_IRQ_GPIO_15 6
+#define NETX_IRQ_WATCHDOG 7
+#define NETX_IRQ_UART0 8
+#define NETX_IRQ_UART1 9
+#define NETX_IRQ_UART2 10
+#define NETX_IRQ_USB 11
+#define NETX_IRQ_SPI 12
+#define NETX_IRQ_I2C 13
+#define NETX_IRQ_LCD 14
+#define NETX_IRQ_HIF 15
+#define NETX_IRQ_GPIO_0_14 16
+#define NETX_IRQ_XPEC0 17
+#define NETX_IRQ_XPEC1 18
+#define NETX_IRQ_XPEC2 19
+#define NETX_IRQ_XPEC3 20
+#define NETX_IRQ_XPEC(no) (17 + (no))
+#define NETX_IRQ_MSYNC0 21
+#define NETX_IRQ_MSYNC1 22
+#define NETX_IRQ_MSYNC2 23
+#define NETX_IRQ_MSYNC3 24
+#define NETX_IRQ_IRQ_PHY 25
+#define NETX_IRQ_ISO_AREA 26
+/* int 27 is reserved */
+/* int 28 is reserved */
+#define NETX_IRQ_TIMER3 29
+#define NETX_IRQ_TIMER4 30
+/* int 31 is reserved */
+
+#define NETX_IRQS 32
+
+/* for multiplexed irqs on gpio 0..14 */
+#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
+#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
+
+/* Host interface interrupts */
+#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
+#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
+#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
+#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
+#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
+#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
+#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
+
+#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
new file mode 100644
index 0000000..53745a1
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-netx/include/mach/memory.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
new file mode 100644
index 0000000..5104a00
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -0,0 +1,410 @@
+/*
+ * arch/arm/mach-netx/include/mach/netx-regs.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_NETX_REGS_H
+#define __ASM_ARCH_NETX_REGS_H
+
+/* offsets relative to the beginning of the io space */
+#define NETX_OFS_SYSTEM 0x00000
+#define NETX_OFS_MEMCR 0x00100
+#define NETX_OFS_DPMAS 0x03000
+#define NETX_OFS_GPIO 0x00800
+#define NETX_OFS_PIO 0x00900
+#define NETX_OFS_UART0 0x00a00
+#define NETX_OFS_UART1 0x00a40
+#define NETX_OFS_UART2 0x00a80
+#define NETX_OF_MIIMU 0x00b00
+#define NETX_OFS_SPI 0x00c00
+#define NETX_OFS_I2C 0x00d00
+#define NETX_OFS_SYSTIME 0x01100
+#define NETX_OFS_RTC 0x01200
+#define NETX_OFS_EXTBUS 0x03600
+#define NETX_OFS_LCD 0x04000
+#define NETX_OFS_USB 0x20000
+#define NETX_OFS_XMAC0 0x60000
+#define NETX_OFS_XMAC1 0x61000
+#define NETX_OFS_XMAC2 0x62000
+#define NETX_OFS_XMAC3 0x63000
+#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
+#define NETX_OFS_PFIFO 0x64000
+#define NETX_OFS_XPEC0 0x70000
+#define NETX_OFS_XPEC1 0x74000
+#define NETX_OFS_XPEC2 0x78000
+#define NETX_OFS_XPEC3 0x7c000
+#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
+#define NETX_OFS_VIC 0xff000
+
+/* physical addresses */
+#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM)
+#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR)
+#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS)
+#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO)
+#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO)
+#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0)
+#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1)
+#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2)
+#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU)
+#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI)
+#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C)
+#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME)
+#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC)
+#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS)
+#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD)
+#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB)
+#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0)
+#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1)
+#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2)
+#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3)
+#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
+#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO)
+#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0)
+#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1)
+#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2)
+#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3)
+#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
+#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC)
+
+/* virual addresses */
+#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM)
+#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR)
+#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS)
+#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO)
+#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO)
+#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0)
+#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1)
+#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2)
+#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU)
+#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI)
+#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C)
+#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME)
+#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC)
+#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS)
+#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD)
+#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB)
+#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0)
+#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1)
+#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2)
+#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3)
+#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
+#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO)
+#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0)
+#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1)
+#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2)
+#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3)
+#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
+#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC)
+
+/*********************************
+ * System functions *
+ *********************************/
+
+/* Registers */
+#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs))
+#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00)
+#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04)
+#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08)
+
+/* FIXME: Docs are not consistent */
+/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */
+#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c)
+
+#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10)
+#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34)
+#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70)
+#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200)
+#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204)
+#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
+#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
+
+/* Bits */
+#define NETX_SYSTEM_RES_CR_RSTIN (1<<0)
+#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1)
+#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3)
+#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4)
+#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5)
+#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6)
+#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24)
+#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25)
+#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26)
+
+#define PHY_CONTROL_RESET (1<<31)
+#define PHY_CONTROL_SIM_BYP (1<<30)
+#define PHY_CONTROL_CLK_XLATIN (1<<29)
+#define PHY_CONTROL_PHY1_EN (1<<21)
+#define PHY_CONTROL_PHY1_NP_MSG_CODE
+#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17)
+#define PHY_CONTROL_PHY1_FIXMODE (1<<16)
+#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13)
+#define PHY_CONTROL_PHY0_EN (1<<12)
+#define PHY_CONTROL_PHY0_NP_MSG_CODE
+#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8)
+#define PHY_CONTROL_PHY0_FIXMODE (1<<7)
+#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4)
+#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
+
+#define PHY_MODE_10BASE_T_HALF 0
+#define PHY_MODE_10BASE_T_FULL 1
+#define PHY_MODE_100BASE_TX_FX_FULL 2
+#define PHY_MODE_100BASE_TX_FX_HALF 3
+#define PHY_MODE_100BASE_TX_HALF 4
+#define PHY_MODE_REPEATER 5
+#define PHY_MODE_POWER_DOWN 6
+#define PHY_MODE_ALL 7
+
+/* Bits */
+#define VECT_CNTL_ENABLE (1 << 5)
+
+/*******************************
+ * GPIO and timer module *
+ *******************************/
+
+/* Registers */
+#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs))
+#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2))
+#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2))
+#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
+#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc)
+#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0)
+#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4)
+#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8)
+#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0)
+
+/* Bits */
+#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0)
+#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1)
+#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2)
+#define NETX_GPIO_CFG_INV (1<<2)
+#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5)
+#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5)
+
+#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0)
+#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1)
+#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2)
+#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3)
+#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4)
+#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5)
+#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6)
+#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
+
+#define GPIO_BIT(gpio) (1<<(gpio))
+#define COUNTER_BIT(counter) ((1<<16)<<(counter))
+
+/*******************************
+ * PIO *
+ *******************************/
+
+/* Registers */
+#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs))
+#define NETX_PIO_INPIO NETX_PIO_REG(0x0)
+#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4)
+#define NETX_PIO_OEPIO NETX_PIO_REG(0x8)
+
+/*******************************
+ * MII Unit *
+ *******************************/
+
+/* Registers */
+#define NETX_MIIMU __io(NETX_VA_MIIMU)
+
+/* Bits */
+#define MIIMU_SNRDY (1<<0)
+#define MIIMU_PREAMBLE (1<<1)
+#define MIIMU_OPMODE_WRITE (1<<2)
+#define MIIMU_MDC_PERIOD (1<<3)
+#define MIIMU_PHY_NRES (1<<4)
+#define MIIMU_RTA (1<<5)
+#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
+#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
+#define MIIMU_DATA(data) (((data) & 0xffff) << 16)
+
+/*******************************
+ * xmac / xpec *
+ *******************************/
+
+/* XPEC register offsets relative to NETX_VA_XPEC(no) */
+#define NETX_XPEC_R0_OFS 0x00
+#define NETX_XPEC_R1_OFS 0x04
+#define NETX_XPEC_R2_OFS 0x08
+#define NETX_XPEC_R3_OFS 0x0c
+#define NETX_XPEC_R4_OFS 0x10
+#define NETX_XPEC_R5_OFS 0x14
+#define NETX_XPEC_R6_OFS 0x18
+#define NETX_XPEC_R7_OFS 0x1c
+#define NETX_XPEC_RANGE01_OFS 0x20
+#define NETX_XPEC_RANGE23_OFS 0x24
+#define NETX_XPEC_RANGE45_OFS 0x28
+#define NETX_XPEC_RANGE67_OFS 0x2c
+#define NETX_XPEC_PC_OFS 0x48
+#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
+#define NETX_XPEC_IRQ_OFS 0x8c
+#define NETX_XPEC_SYSTIME_NS_OFS 0x90
+#define NETX_XPEC_FIFO_DATA_OFS 0x94
+#define NETX_XPEC_SYSTIME_S_OFS 0x98
+#define NETX_XPEC_ADC_OFS 0x9c
+#define NETX_XPEC_URX_COUNT_OFS 0x40
+#define NETX_XPEC_UTX_COUNT_OFS 0x44
+#define NETX_XPEC_PC_OFS 0x48
+#define NETX_XPEC_ZERO_OFS 0x4c
+#define NETX_XPEC_STATCFG_OFS 0x50
+#define NETX_XPEC_EC_MASKA_OFS 0x54
+#define NETX_XPEC_EC_MASKB_OFS 0x58
+#define NETX_XPEC_EC_MASK0_OFS 0x5c
+#define NETX_XPEC_EC_MASK8_OFS 0x7c
+#define NETX_XPEC_EC_MASK9_OFS 0x80
+#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100
+#define NETX_XPEC_RAM_START_OFS 0x2000
+
+/* Bits */
+#define XPU_HOLD_PC (1<<0)
+
+/* XMAC register offsets relative to NETX_VA_XMAC(no) */
+#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000
+#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff
+#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400
+#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff
+#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00
+#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04
+#define NETX_XMAC_STATUS_SHARED0_OFS 0x840
+#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844
+#define NETX_XMAC_STATUS_SHARED1_OFS 0x848
+#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c
+#define NETX_XMAC_STATUS_SHARED2_OFS 0x850
+#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854
+#define NETX_XMAC_STATUS_SHARED3_OFS 0x858
+#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c
+
+#define RPU_HOLD_PC (1<<15)
+#define TPU_HOLD_PC (1<<15)
+
+/*******************************
+ * Pointer FIFO *
+ *******************************/
+
+/* Registers */
+#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs))
+#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
+#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
+#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100)
+#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104)
+#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108)
+#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c)
+#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110)
+#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
+#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
+
+/*******************************
+ * Dual Port Memory *
+ *******************************/
+
+/* Registers */
+#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs))
+#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8)
+#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0)
+#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0)
+#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608)
+#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c)
+#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs))
+#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */
+#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624)
+#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628)
+#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */
+#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634)
+#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638)
+
+/* Bits */
+#define NETX_DPMAS_INT_EN_GLB_EN (1<<31)
+#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30)
+#define NETX_DPMAS_INT_EN_WDG (1<<29)
+#define NETX_DPMAS_INT_EN_PIO72 (1<<28)
+#define NETX_DPMAS_INT_EN_PIO47 (1<<27)
+#define NETX_DPMAS_INT_EN_PIO40 (1<<26)
+#define NETX_DPMAS_INT_EN_PIO36 (1<<25)
+#define NETX_DPMAS_INT_EN_PIO35 (1<<24)
+
+#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
+
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
+
+#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
+#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26)
+#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23)
+#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20)
+#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17)
+#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12)
+#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7)
+#define NETX_EXT_CONFIG_WAIT_POL (1<<6)
+#define NETX_EXT_CONFIG_WAIT_EN (1<<5)
+#define NETX_EXT_CONFIG_NRD_MODE (1<<4)
+#define NETX_EXT_CONFIG_DS_MODE (1<<3)
+#define NETX_EXT_CONFIG_NWR_MODE (1<<2)
+#define NETX_EXT_CONFIG_16BIT (1<<1)
+#define NETX_EXT_CONFIG_CS_ENABLE (1<<0)
+
+#define NETX_DPMAS_IO_MODE0_WRL (1<<13)
+#define NETX_DPMAS_IO_MODE0_WAIT (1<<14)
+#define NETX_DPMAS_IO_MODE0_READY (1<<15)
+#define NETX_DPMAS_IO_MODE0_CS0 (1<<19)
+#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
+
+#define NETX_DPMAS_IO_MODE1_CS2 (1<<15)
+#define NETX_DPMAS_IO_MODE1_CS1 (1<<16)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30)
+
+/*******************************
+ * I2C *
+ *******************************/
+#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs))
+#define NETX_I2C_CTRL NETX_I2C_REG(0x0)
+#define NETX_I2C_DATA NETX_I2C_REG(0x4)
+
+#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/mach-netx/include/mach/param.h
new file mode 100644
index 0000000..a771459
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-netx/include/mach/param.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
new file mode 100644
index 0000000..42c5906
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-netx/include/mach/pfifo.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef ASM_ARCH_PFIFO_H
+#define ASM_ARCH_PFIFO_H
+
+static inline int pfifo_push(int no, unsigned int pointer)
+{
+ writel(pointer, NETX_PFIFO_BASE(no));
+ return 0;
+}
+
+static inline unsigned int pfifo_pop(int no)
+{
+ return readl(NETX_PFIFO_BASE(no));
+}
+
+static inline int pfifo_fill_level(int no)
+{
+
+ return readl(NETX_PFIFO_FILL_LEVEL(no));
+}
+
+static inline int pfifo_full(int no)
+{
+ return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
+}
+
+static inline int pfifo_empty(int no)
+{
+ return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
+}
+
+int pfifo_request(unsigned int pfifo_mask);
+void pfifo_free(unsigned int pfifo_mask);
+
+#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
new file mode 100644
index 0000000..27d8ef8
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-netx/include/mach/system.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include "netx-regs.h"
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+ NETX_SYSTEM_RES_CR);
+}
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
new file mode 100644
index 0000000..1120dd0
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-netx/include/mach/timex.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
new file mode 100644
index 0000000..84f9128
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-netx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+#define REG(x) (*(volatile unsigned long *)(x))
+
+#define UART1_BASE 0x100a00
+#define UART2_BASE 0x100a80
+
+#define UART_DR 0x0
+
+#define UART_CR 0x14
+#define CR_UART_EN (1<<0)
+
+#define UART_FR 0x18
+#define FR_BUSY (1<<3)
+#define FR_TXFF (1<<5)
+
+static void putc(char c)
+{
+ unsigned long base;
+
+ if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+ base = UART1_BASE;
+ else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+ base = UART2_BASE;
+ else
+ return;
+
+ while (REG(base + UART_FR) & FR_TXFF);
+ REG(base + UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+ unsigned long base;
+
+ if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+ base = UART1_BASE;
+ else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+ base = UART2_BASE;
+ else
+ return;
+
+ while (REG(base + UART_FR) & FR_BUSY);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
new file mode 100644
index 0000000..25d5cc6
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-netx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
new file mode 100644
index 0000000..0c0011d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-netx/include/mach/xc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_XC_H
+#define __ASM_ARCH_XC_H
+
+struct xc {
+ int no;
+ unsigned int type;
+ unsigned int version;
+ void __iomem *xpec_base;
+ void __iomem *xmac_base;
+ void __iomem *sram_base;
+ int irq;
+ struct device *dev;
+};
+
+int xc_reset(struct xc *x);
+int xc_stop(struct xc* x);
+int xc_start(struct xc *x);
+int xc_running(struct xc *x);
+int xc_request_firmware(struct xc* x);
+struct xc* request_xc(int xcno, struct device *dev);
+void free_xc(struct xc *x);
+
+#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 0cb1945..c9b174b 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
#include "generic.h"
#include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 848b2f1..15b54c6 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
#include "generic.h"
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index cb361ea..1061c01 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
#include "generic.h"
#include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index d0e6b43..19ae0a7 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
#include <linux/mutex.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
static DEFINE_MUTEX(pfifo_lock);
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 2c93fd3..ac8e5bf 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
#include <linux/irq.h>
#include <linux/clocksource.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
/*
* IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 0ea4d3b..04c34e8 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
#include <linux/mutex.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
static DEFINE_MUTEX(xc_lock);
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index 46b4f5a..a22a608 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
#include <asm/mach/map.h>
#include <asm/gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-bbu.h>
-#include <asm/arch/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
#include "board-a9m9750dev.h"
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index 7bc05a4..377330c 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <asm/arch/regs-bbu.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
#include "gpio-ns9360.h"
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index ed4c833..804c300 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
#include <linux/spinlock.h>
#include <linux/module.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/processor.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
#include <asm/bug.h>
#include <asm/types.h>
#include <asm/bitops.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
new file mode 100644
index 0000000..f7e9196
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/board.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev() (0 \
+ || machine_is_cc9p9360dev() \
+ || machine_is_cc9p9750dev() \
+ )
+
+#define board_is_a9mvali() (0 \
+ || machine_is_cc9p9360val() \
+ || machine_is_cc9p9750val() \
+ )
+
+#define board_is_jscc9p9210() (0 \
+ || machine_is_cc9p9210js() \
+ )
+
+#define board_is_jscc9p9215() (0 \
+ || machine_is_cc9p9215js() \
+ )
+
+#define board_is_jscc9p9360() (0 \
+ || machine_is_cc9p9360js() \
+ )
+
+#define board_is_uncbas() (0 \
+ || machine_is_cc7ucamry() \
+ )
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
new file mode 100644
index 0000000..c9530fb
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+#include <mach/regs-board-a9m9750dev.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
+ ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
new file mode 100644
index 0000000..3f50d8c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
new file mode 100644
index 0000000..71ca031
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =SYS_ISRADDR
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+ cmp \irqstat, #0
+ ldrne \irqnr, [\base]
+ .endm
+
+ .macro disable_fiq
+ .endm
diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
new file mode 100644
index 0000000..5eb3490
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+
+int gpio_request(unsigned gpio, const char *label);
+
+void gpio_free(unsigned gpio);
+
+int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
+
+int gpio_direction_input(unsigned gpio);
+
+int gpio_direction_output(unsigned gpio, int value);
+
+int gpio_get_value(unsigned gpio);
+
+void gpio_set_value(unsigned gpio, int value);
+
+/*
+ * ns9xxx can use gpio pins to trigger an irq, but it's not generic
+ * enough to be supported by the gpio_to_irq/irq_to_gpio interface
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+/* get the cansleep() stubs */
+#include <asm-generic/gpio.h>
+
+#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
new file mode 100644
index 0000000..6dbb203
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x) (0xf0000000 \
+ + (((x) & 0xf0000000) >> 4) \
+ + ((x) & 0x00ffffff))
+
+#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
+ + ((x) & 0x00ffffff))
+
+#define __REGSHIFT(mask) ((mask) & (-(mask)))
+
+#define __REGBIT(bit) ((u32)1 << (bit))
+#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) ((void __iomem __force *)io_p2v((x)))
+# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
+
+# define __REGSET(var, field, value) \
+ ((var) = (((var) & ~((field) & ~(value))) | (value)))
+
+# define REGSET(var, reg, field, value) \
+ __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
+
+# define REGSET_IDX(var, reg, field, idx, value) \
+ __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
+
+# define REGSETIM(var, reg, field, value) \
+ __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
+
+# define REGSETIM_IDX(var, reg, field, idx, value) \
+ __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
+
+# define __REGGET(var, field) \
+ (((var) & (field)))
+
+# define REGGET(var, reg, field) \
+ __REGGET(var, reg ## _ ## field)
+
+# define REGGET_IDX(var, reg, field, idx) \
+ __REGGET(var, reg ## _ ## field((idx)))
+
+# define REGGETIM(var, reg, field) \
+ __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
+
+# define REGGETIM_IDX(var, reg, field, idx) \
+ __REGGET(var, reg ## _ ## field((idx))) / \
+ __REGSHIFT(reg ## _ ## field((idx)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __REG2(x, y) io_p2v((x) + 4 * (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
new file mode 100644
index 0000000..027bf64
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff /* XXX */
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
new file mode 100644
index 0000000..1348394
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG 0
+#define IRQ_NS9XXX_AHBBUSERR 1
+#define IRQ_NS9360_BBUSAGG 2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_NS9XXX_ETHRX 4
+#define IRQ_NS9XXX_ETHTX 5
+#define IRQ_NS9XXX_ETHPHY 6
+#define IRQ_NS9360_LCD 7
+#define IRQ_NS9360_SERBRX 8
+#define IRQ_NS9360_SERBTX 9
+#define IRQ_NS9360_SERARX 10
+#define IRQ_NS9360_SERATX 11
+#define IRQ_NS9360_SERCRX 12
+#define IRQ_NS9360_SERCTX 13
+#define IRQ_NS9360_I2C 14
+#define IRQ_NS9360_BBUSDMA 15
+#define IRQ_NS9360_TIMER0 16
+#define IRQ_NS9360_TIMER1 17
+#define IRQ_NS9360_TIMER2 18
+#define IRQ_NS9360_TIMER3 19
+#define IRQ_NS9360_TIMER4 20
+#define IRQ_NS9360_TIMER5 21
+#define IRQ_NS9360_TIMER6 22
+#define IRQ_NS9360_TIMER7 23
+#define IRQ_NS9360_RTC 24
+#define IRQ_NS9360_USBHOST 25
+#define IRQ_NS9360_USBDEVICE 26
+#define IRQ_NS9360_IEEE1284 27
+#define IRQ_NS9XXX_EXT0 28
+#define IRQ_NS9XXX_EXT1 29
+#define IRQ_NS9XXX_EXT2 30
+#define IRQ_NS9XXX_EXT3 31
+
+#define BBUS_IRQ(irq) (32 + irq)
+
+#define IRQ_BBUS_DMA BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
+#define IRQ_BBUS_I2C BBUS_IRQ(10)
+#define IRQ_BBUS_1284 BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL BBUS_IRQ(12)
+#define IRQ_BBUS_RTC BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_NS9360_EXT2
+ */
+#define FPGA_IRQ(irq) (64 + irq)
+
+#define IRQ_FPGA_UARTA FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
+#define IRQ_FPGA_CF FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
+
+#define NR_IRQS 72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
new file mode 100644
index 0000000..649ee62
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
new file mode 100644
index 0000000..f851a6b
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry() (0 \
+ || machine_is_cc7ucamry() \
+ )
+
+#define module_is_cc9c() (0 \
+ || machine_is_cc9c() \
+ )
+
+#define module_is_cc9p9210() (0 \
+ || machine_is_cc9p9210() \
+ || machine_is_cc9p9210js() \
+ )
+
+#define module_is_cc9p9215() (0 \
+ || machine_is_cc9p9215() \
+ || machine_is_cc9p9215js() \
+ )
+
+#define module_is_cc9p9360() (0 \
+ || machine_is_a9m9360() \
+ || machine_is_cc9p9360dev() \
+ || machine_is_cc9p9360js() \
+ || machine_is_cc9p9360val() \
+ )
+
+#define module_is_cc9p9750() (0 \
+ || machine_is_a9m9750() \
+ || machine_is_cc9p9750dev() \
+ || machine_is_cc9p9750js() \
+ || machine_is_cc9p9750val() \
+ )
+
+#define module_is_ccw9c() (0 \
+ || machine_is_ccw9c() \
+ )
+
+#define module_is_inc20otter() (0 \
+ || machine_is_inc20otter() \
+ )
+
+#define module_is_otter() (0 \
+ || machine_is_otter() \
+ )
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
new file mode 100644
index 0000000..f41deda
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSORNS9360_H
+#define __ASM_ARCH_PROCESSORNS9360_H
+
+#include <linux/init.h>
+
+void ns9360_reset(char mode);
+
+unsigned long ns9360_systemclock(void) __attribute__((const));
+
+static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
+static inline unsigned long ns9360_cpuclock(void)
+{
+ return ns9360_systemclock() / 2;
+}
+
+void __init ns9360_map_io(void);
+
+extern struct sys_timer ns9360_timer;
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func);
+
+#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
new file mode 100644
index 0000000..9f77f74
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <mach/module.h>
+
+#define processor_is_ns9210() (0 \
+ || module_is_cc7ucamry() \
+ || module_is_cc9p9210() \
+ || module_is_inc20otter() \
+ || module_is_otter() \
+ )
+
+#define processor_is_ns9215() (0 \
+ || module_is_cc9p9215() \
+ )
+
+#define processor_is_ns9360() (0 \
+ || module_is_cc9p9360() \
+ || module_is_cc9c() \
+ || module_is_ccw9c() \
+ )
+
+#define processor_is_ns9750() (0 \
+ || module_is_cc9p9750() \
+ )
+
+#define processor_is_ns921x() (0 \
+ || processor_is_ns9210() \
+ || processor_is_ns9215() \
+ )
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
new file mode 100644
index 0000000..af227c0
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <mach/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Registers block 1 */
+/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
+ * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register
+ * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
+#define BBU_GCONFb1(x) __REG2(0x90600010, (x))
+#define BBU_GCONFb2(x) __REG2(0x90600100, (x))
+
+#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2))
+#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0)
+#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1)
+#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2))
+#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0)
+#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1)
+#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
+#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0)
+#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1)
+#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2)
+#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3)
+
+#define BBU_GCTRL1 __REG(0x90600030)
+#define BBU_GCTRL2 __REG(0x90600034)
+#define BBU_GCTRL3 __REG(0x90600120)
+
+#define BBU_GSTAT1 __REG(0x90600040)
+#define BBU_GSTAT2 __REG(0x90600044)
+#define BBU_GSTAT3 __REG(0x90600130)
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
new file mode 100644
index 0000000..cd15936
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <mach/hardware.h>
+
+#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
new file mode 100644
index 0000000..f1625bf
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <mach/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL __REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT __REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF __REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL __REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT __REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC __REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP __REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP __REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET __REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT __REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT __REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT __REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP __REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP __REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC __REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT __REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT __REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW __REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_PSMC __REGBIT(20)
+#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0)
+#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC __REGBIT(19)
+#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW __REGBIT(8)
+#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB __REGBIT(7)
+#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC __REGBIT(6)
+#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM __REGBIT(3)
+#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW __REGBITS(1, 0)
+#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
new file mode 100644
index 0000000..14f91df
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGSSYSCOMMON_H
+#define __ASM_ARCH_REGSSYSCOMMON_H
+#include <mach/hardware.h>
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x) __REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x) __REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA __REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR __REG(0xa090016c)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
new file mode 100644
index 0000000..8ff254d
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYSNS9360_H
+#define __ASM_ARCH_REGSSYSNS9360_H
+
+#include <mach/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF __REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x) __REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x) __REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x) __REG2(0xa0900084, (x))
+
+/* Timer Interrupt Status register */
+#define SYS_TIS __REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL __REG(0xa0900188)
+
+/* PLL FS status */
+#define SYS_PLL_FS __REGBITS(24, 23)
+
+/* PLL ND status */
+#define SYS_PLL_ND __REGBITS(20, 16)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC __REGBIT(15)
+#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x) __REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN __REGBIT(15)
+#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0)
+#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG __REGBIT(10)
+#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC __REGBIT(9)
+#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS __REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
+#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM __REGBITS(5, 4)
+#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
+#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
+#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS __REGBIT(3)
+#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS __REGBIT(2)
+#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ __REGBIT(1)
+#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN __REGBIT(0)
+#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx __REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID __REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x) __REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS __REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR __REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY __REGBIT(1)
+#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG __REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
new file mode 100644
index 0000000..e2068c5
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/system.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_PROCESSOR_NS9360
+ if (processor_is_ns9360())
+ ns9360_reset(mode);
+ else
+#endif
+ BUG();
+
+ BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
new file mode 100644
index 0000000..734a8d8
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
new file mode 100644
index 0000000..5dbc3c5
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+
+#define __REG(x) ((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
+{
+ /* nothing */
+}
+
+static void putc_ns9360(char c, void __iomem *base)
+{
+ static int t = 0x10000;
+ do {
+ if (t)
+ --t;
+
+ if (__raw_readl(base + 8) & (1 << 3)) {
+ __raw_writeb(c, base + 16);
+ t = 0x10000;
+ break;
+ }
+ } while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+ static int t = 0x10000;
+ do {
+ if (t)
+ --t;
+
+ if (__raw_readb(base + 5) & (1 << 5)) {
+ __raw_writeb(c, base);
+ t = 0x10000;
+ break;
+ }
+ } while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+ static int t = 0x10000;
+ do {
+ if (t)
+ --t;
+
+ if (!(__raw_readl(base) & (1 << 11))) {
+ __raw_writeb(c, base + 0x0028);
+ t = 0x10000;
+ break;
+ }
+ } while (t);
+}
+
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA __REG(0x90200040)
+#define NS9360_UARTB __REG(0x90200000)
+#define NS9360_UARTC __REG(0x90300000)
+#define NS9360_UARTD __REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base) \
+ (__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA __REG(0x40000000)
+
+#define NS921XSYS_CLOCK __REG(0xa090017c)
+#define NS921X_UARTA __REG(0x90010000)
+#define NS921X_UARTB __REG(0x90018000)
+#define NS921X_UARTC __REG(0x90020000)
+#define NS921X_UARTD __REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base) \
+ (__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+ if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+ /* ns9360 or ns9750 */
+ if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+ *putc = putc_ns9360;
+ *base = NS9360_UARTA;
+ return;
+ } else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+ *putc = putc_ns9360;
+ *base = NS9360_UARTB;
+ return;
+ } else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+ *putc = putc_ns9360;
+ *base = NS9360_UARTC;
+ return;
+ } else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+ *putc = putc_ns9360;
+ *base = NS9360_UARTD;
+ return;
+ } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+ *putc = putc_a9m9750dev;
+ *base = A9M9750DEV_UARTA;
+ return;
+ }
+ } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+ /* ns921x */
+ u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+ if ((clock & (1 << 1)) &&
+ NS921X_UART_ENABLED(NS921X_UARTA)) {
+ *putc = putc_ns921x;
+ *base = NS921X_UARTA;
+ return;
+ } else if ((clock & (1 << 2)) &&
+ NS921X_UART_ENABLED(NS921X_UARTB)) {
+ *putc = putc_ns921x;
+ *base = NS921X_UARTB;
+ return;
+ } else if ((clock & (1 << 3)) &&
+ NS921X_UART_ENABLED(NS921X_UARTC)) {
+ *putc = putc_ns921x;
+ *base = NS921X_UARTC;
+ return;
+ } else if ((clock & (1 << 4)) &&
+ NS921X_UART_ENABLED(NS921X_UARTD)) {
+ *putc = putc_ns921x;
+ *base = NS921X_UARTD;
+ return;
+ }
+ }
+
+ *putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+ myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+ autodetect(&myputc, &base);
+}
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+ /* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
new file mode 100644
index 0000000..fe964d3
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 96de8eb..38260d5 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,9 +12,9 @@
#include <linux/kernel_stat.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-sys-common.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
#include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 7714233..2858417 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
#include "board-a9m9750dev.h"
#include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index bdbd0bb..729f68d 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
#include "board-jscc9p9360.h"
#include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index c9cce9b..795b15e 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
-#include <asm/arch/regs-board-a9m9750dev.h>
-#include <asm/arch/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
#define DRIVER_NAME "serial8250"
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 8ee81b5..abee833 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
#include <asm/page.h>
#include <asm/mach/map.h>
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
void ns9360_reset(char mode)
{
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 66bd582..a63424d 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
#include "generic.h"
#define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 46488c2..2e61839 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
#include <linux/input.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 8583e80..db78946 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
static int fsample_keymap[] = {
KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index d902662..7d26702 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
static void __init omap_generic_init_irq(void)
{
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc784..ab9ee58 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
* published by the Free Software Foundation.
*/
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f69e3b5..3b65914 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
@@ -37,16 +37,16 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc43..3608581 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
* published by the Free Software Foundation.
*/
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 1ae3826..2ced6d9 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
#include <asm/setup.h>
#include <asm/page.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
@@ -39,18 +39,18 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
#define H3_TS_GPIO 48
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 667c720..cbc11be 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 2826214..38d9783 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
#define ADS7846_PENDOWN_GPIO 15
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4d8cd9f..3e766e4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
#include <linux/i2c/tps65010.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
@@ -47,12 +47,12 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@@ -340,7 +340,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
static const int osk_keymap[] = {
/* KEY(col, row, code) */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 6855255..b580436 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
static void __init omap_palmte_init_irq(void)
{
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 96896f8..40f9860 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
#include <linux/mtd/partitions.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index b8ccdb2..e719294 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 9857fc9..b715917 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
static int p2_keymap[] = {
KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d47..0be4eba 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
* published by the Free Software Foundation.
*/
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c2c42b..130bcc6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
#include <linux/i2c.h>
#include <linux/errno.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 902b12e..213b487 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
static struct plat_serial8250_port voiceblue_ports[] = {
{
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933..5965cf0 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
#include "clock.h"
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 9ad8f92..ab708d4 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,14 +14,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/map.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
/*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index b9649c7..4449d86 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
#include <linux/device.h>
#include <linux/errno.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
static void fpga_mask_irq(unsigned int irq)
{
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e73..2b9750b 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
extern int omap1_clk_init(void);
extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 061f073..0ec6c1e 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index c9e894a..610f51f 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
#include <linux/sched.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index 82eacb0..9b99c28 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 1cd94e0..98e7896 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac..6cdad93 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e71..af44eab 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
#include <linux/resource.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
#include <asm/io.h>
#define MAILBOX_ARM2DSP1 0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c252..826010d 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7..898516e 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
#include <asm/io.h>
#include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index bb06de9..63c4ea1 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -48,15 +48,15 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe8..0e25a99 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
#ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
#endif
static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39..f3eac93 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
.text
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 776c89c..261cdc4 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
.text
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index ae89103..e547085 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
#include <linux/clockchips.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index f358fe9..e677601 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
#include <linux/clockchips.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
struct sys_timer omap_timer;
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8911f8e..d4d6385 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 170c968..989ad15 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
/* LED & Switch macros */
#define LED0_GPIO13 13
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 68ec3a3..9ba0978 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
static void __init omap_generic_init_irq(void)
{
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a32b475..9e2624c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bc..1d891e4 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
#include <asm/div64.h>
#include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb..626e5fa 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa56787..295e671 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
#include <linux/io.h>
#include <linux/cpufreq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
#include <asm/div64.h>
#include <asm/bitops.h>
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099..3ff7495 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
#include <linux/io.h>
#include <linux/limits.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
#include <asm/div64.h>
#include <asm/bitops.h>
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb..ec66445 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#include <asm/arch/control.h>
+#include <mach/control.h>
#include "clock.h"
#include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f7030..5f3aad9 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
static void __iomem *omap2_ctrl_base;
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a6acdcd..7a7f025 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
@@ -142,7 +142,7 @@
#if defined(CONFIG_SPI_OMAP24XX)
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc..f51d69b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
#undef DEBUG
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16..a5d4526 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
#include <asm/io.h>
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
#if defined(CONFIG_ARCH_OMAP2420)
#define TAP_BASE io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174..987351f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
#include <asm/mach/map.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 6d4c4bf..9ef15b3 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561..a480b96 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
#include <asm/io.h>
#define MAILBOX_REVISION 0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199..27eb6e3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
struct mcbsp_internal_clk {
struct clk clk;
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2..6b49cc9 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
#include <asm/io.h>
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
#include "prm.h"
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20..443d07f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
#include <asm/io.h>
#include <linux/spinlock.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 5e6e595..8671e10 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -31,10 +31,10 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80..f945156 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
#include "clock.h"
#include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f..1a8bbd0 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
*/
#undef DEBUG
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
#ifndef __ASSEMBLER__
extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367f..adc8a26a 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
#include <asm/io.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
static struct clk * uart1_ick = NULL;
static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b..87a706f 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 229a928..af4bd34 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
#include "prm.h"
#include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 1665ebb..84363e2 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
#include "prm.h"
#include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f..589393b 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
#include <linux/clockchips.h>
#include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42e..1607c94 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
#include <linux/usb/musb.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
static u8 async_cs, sync_cs;
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9a3cc00..bea3797 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e32..168eeac 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,8 +24,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
#include <asm/plat-orion/ehci-orion.h>
#include <asm/plat-orion/orion_nand.h>
#include <asm/plat-orion/time.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 40a0bee..48ce6d0 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,7 +24,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6..1a1d84b 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d097979..cd8a16f 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
#include <linux/bitops.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
static DEFINE_SPINLOCK(gpio_lock);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
new file mode 100644
index 0000000..c7f808bf
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/orion5x.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =ORION5X_REGS_PHYS_BASE
+ ldrne \rx, =ORION5X_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-orion5x/include/mach/dma.h
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
new file mode 100644
index 0000000..4351937
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/orion5x.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =MAIN_IRQ_CAUSE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #0] @ main cause
+ ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+ mov \irqnr, #0 @ default irqnr
+ @ find cause bits that are unmasked
+ ands \irqstat, \irqstat, \tmp @ clear Z flag if any
+ clzne \irqnr, \irqstat @ calc irqnr
+ rsbne \irqnr, \irqnr, #31
+ .endm
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
new file mode 100644
index 0000000..65dc136
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void); /* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+ return pin + IRQ_ORION5X_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ return irq - IRQ_ORION5X_GPIO_START;
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
new file mode 100644
index 0000000..e51aaf4
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "orion5x.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 0000000..f24b251
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+ void __iomem *retval;
+ unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
+ if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
+ size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
+ retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
+ } else {
+ retval = __arm_ioremap(paddr, size, mtype);
+ }
+
+ return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+ if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+ addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+ __iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
+#define __arch_iounmap(a) __arch_iounmap(a)
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe. Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r))
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
new file mode 100644
index 0000000..d5b0fbf
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h" /* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE 0
+#define IRQ_ORION5X_DOORBELL_H2C 1
+#define IRQ_ORION5X_DOORBELL_C2H 2
+#define IRQ_ORION5X_UART0 3
+#define IRQ_ORION5X_UART1 4
+#define IRQ_ORION5X_I2C 5
+#define IRQ_ORION5X_GPIO_0_7 6
+#define IRQ_ORION5X_GPIO_8_15 7
+#define IRQ_ORION5X_GPIO_16_23 8
+#define IRQ_ORION5X_GPIO_24_31 9
+#define IRQ_ORION5X_PCIE0_ERR 10
+#define IRQ_ORION5X_PCIE0_INT 11
+#define IRQ_ORION5X_USB1_CTRL 12
+#define IRQ_ORION5X_DEV_BUS_ERR 14
+#define IRQ_ORION5X_PCI_ERR 15
+#define IRQ_ORION5X_USB_BR_ERR 16
+#define IRQ_ORION5X_USB0_CTRL 17
+#define IRQ_ORION5X_ETH_RX 18
+#define IRQ_ORION5X_ETH_TX 19
+#define IRQ_ORION5X_ETH_MISC 20
+#define IRQ_ORION5X_ETH_SUM 21
+#define IRQ_ORION5X_ETH_ERR 22
+#define IRQ_ORION5X_IDMA_ERR 23
+#define IRQ_ORION5X_IDMA_0 24
+#define IRQ_ORION5X_IDMA_1 25
+#define IRQ_ORION5X_IDMA_2 26
+#define IRQ_ORION5X_IDMA_3 27
+#define IRQ_ORION5X_CESA 28
+#define IRQ_ORION5X_SATA 29
+#define IRQ_ORION5X_XOR0 30
+#define IRQ_ORION5X_XOR1 31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START 32
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
new file mode 100644
index 0000000..54dd76b
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
new file mode 100644
index 0000000..f52a7d6
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000 PCIe MEM space
+ * e8000000 PCI MEM space
+ * f0000000 PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe I/O space
+ * f2100000 PCI I/O space
+ * f4000000 device bus mappings (boot)
+ * fa000000 device bus mappings (cs0)
+ * fa800000 device bus mappings (cs2)
+ * fc000000 device bus mappings (cs0/cs1)
+ *
+ * virt phys size
+ * fdd00000 f1000000 1M on-chip peripheral registers
+ * fde00000 f2000000 1M PCIe I/O space
+ * fdf00000 f2100000 1M PCI I/O space
+ * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE 0xf1000000
+#define ORION5X_REGS_VIRT_BASE 0xfdd00000
+#define ORION5X_REGS_SIZE SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE 0x00000000
+#define ORION5X_PCIE_IO_SIZE SZ_1M
+
+#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE 0x00100000
+#define ORION5X_PCI_IO_SIZE SZ_1M
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
+#define ORION5X_PCIE_WA_SIZE SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
+#define ORION5X_PCIE_MEM_SIZE SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000
+#define ORION5X_PCI_MEM_SIZE SZ_128M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID 0x5181
+#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID 0x5182
+#define MV88F5182_REV_A2 2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D1 5
+#define MV88F5281_REV_D2 6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
+
+#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
+
+#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x))
+
+#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
+
+#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
+
+#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x))
+
+#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4)
+#define GPIO_MAX 32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
new file mode 100644
index 0000000..08e4307
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable and issue soft reset
+ */
+ orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+ orion5x_setbits(CPU_SOFT_RESET, 1);
+}
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
new file mode 100644
index 0000000..e82e44d
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
+
+#define ORION5X_TCLK 166666667
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
new file mode 100644
index 0000000..4322dba
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/orion5x.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 0000000..7147a29
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 9ae3f6d..cc2a017 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,7 +15,7 @@
#include <linux/irq.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include <asm/plat-orion/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4..0caaaac 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,7 +24,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 8eadc9b..c04ab0e 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e40..4403cc9 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0f..67b2c0d 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 73e9242..e72fe1e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -21,7 +21,7 @@
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ac48201..a1fe325 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -22,7 +22,7 @@
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 2a46d27..8771cb7 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f270ada..809132d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "tsx09-common.h"
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff0..6053e76 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -24,7 +24,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "tsx09-common.h"
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f35..014916a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 25568c2..b6bc43e 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -19,7 +19,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 9b8ee8c..b10da17 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -19,7 +19,7 @@
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 576e9a4..24d036a 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
#include <linux/err.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
#include "clock.h"
/*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 156d8fa..3ba46ed 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
#include <linux/device.h>
#include <linux/spi/spi.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -38,9 +38,9 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
struct resource spipnx_0_resources[] = {
{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fee0d25..833c56b 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
#include <linux/clk.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
#include <asm/dma-mapping.h>
#include <asm/io.h>
#include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
static struct dma_channel {
char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179ca..fb51f72 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
/* register definitions */
#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f30882..87c0932 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
#include <linux/i2c-pnx.h>
#include <linux/platform_device.h>
#include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
static int set_clock_run(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 0000000..8d2a5ef
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 0000000..6d1407f
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ mov \rx, #0x00090000
+ addeq \rx, \rx, #0x40000000
+ addne \rx, \rx, #0xf4000000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 0000000..5442d04
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ * PNX4008 DMA header file
+ *
+ * Author: Vitaly Wool
+ * Copyright: MontaVista Software Inc. (c) 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS 0xffffffff
+
+#define MAX_DMA_CHANNELS 8
+
+#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT (DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024)
+#define DMAC_CONFIG (DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+ WIDTH_BYTE = 0,
+ WIDTH_HWORD,
+ WIDTH_WORD
+};
+
+enum {
+ FC_MEM2MEM_DMA,
+ FC_MEM2PER_DMA,
+ FC_PER2MEM_DMA,
+ FC_PER2PER_DMA,
+ FC_PER2PER_DPER,
+ FC_MEM2PER_PER,
+ FC_PER2MEM_PER,
+ FC_PER2PER_SPER
+};
+
+enum {
+ DMA_INT_UNKNOWN = 0,
+ DMA_ERR_INT = 1,
+ DMA_TC_INT = 2,
+};
+
+enum {
+ DMA_BUFFER_ALLOCATED = 1,
+ DMA_HAS_LL = 2,
+};
+
+enum {
+ PER_CAM_DMA_1 = 0,
+ PER_NDF_FLASH = 1,
+ PER_MBX_SLAVE_FIFO = 2,
+ PER_SPI2_REC_XMIT = 3,
+ PER_MS_SD_RX_XMIT = 4,
+ PER_HS_UART_1_XMIT = 5,
+ PER_HS_UART_1_RX = 6,
+ PER_HS_UART_2_XMIT = 7,
+ PER_HS_UART_2_RX = 8,
+ PER_HS_UART_7_XMIT = 9,
+ PER_HS_UART_7_RX = 10,
+ PER_SPI1_REC_XMIT = 11,
+ PER_MLC_NDF_SREC = 12,
+ PER_CAM_DMA_2 = 13,
+ PER_PRNG_INFIFO = 14,
+ PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+ int tc_mask;
+ int cacheable;
+ int bufferable;
+ int priv_mode;
+ int di;
+ int si;
+ int dest_ahb1;
+ int src_ahb1;
+ int dwidth;
+ int swidth;
+ int dbsize;
+ int sbsize;
+ int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+ int halt;
+ int active;
+ int lock;
+ int itc;
+ int ie;
+ int flow_cntrl;
+ int dest_per;
+ int src_per;
+};
+
+struct pnx4008_dma_ll {
+ unsigned long src_addr;
+ unsigned long dest_addr;
+ u32 next_dma;
+ unsigned long ch_ctrl;
+ struct pnx4008_dma_ll *next;
+ int flags;
+ void *alloc_data;
+ int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+ int is_ll;
+ unsigned long src_addr;
+ unsigned long dest_addr;
+ unsigned long ch_ctrl;
+ unsigned long ch_cfg;
+ struct pnx4008_dma_ll *ll;
+ u32 ll_dma;
+ int flags;
+ void *alloc_data;
+ int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+ void (*)(int, int, void *),
+ void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+ unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+ struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+ unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+ struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+ struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+ struct pnx4008_dma_ch_ctrl *);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 0000000..8003037
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE 0xF0000000
+#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK 0x00
+#define INTRC_RAW_STAT 0x04
+#define INTRC_STAT 0x08
+#define INTRC_POLAR 0x0C
+#define INTRC_ACT_TYPE 0x10
+#define INTRC_TYPE 0x14
+
+#define SIC1_BASE_INT 32
+#define SIC2_BASE_INT 64
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+ ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+ ldr \irqstat, [\base, #INTRC_STAT]
+
+ cmp \irqstat,#1<<16
+ movhs \irqnr,#16
+ movlo \irqnr,#0
+ movhs \irqstat,\irqstat,lsr#16
+ cmp \irqstat,#1<<8
+ addhs \irqnr,\irqnr,#8
+ movhs \irqstat,\irqstat,lsr#8
+ cmp \irqstat,#1<<4
+ addhs \irqnr,\irqnr,#4
+ movhs \irqstat,\irqstat,lsr#4
+ cmp \irqstat,#1<<2
+ addhs \irqnr,\irqnr,#2
+ movhs \irqstat,\irqstat,lsr#2
+ cmp \irqstat,#1<<1
+ addhs \irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+ teq \irqstat,#0
+ beq 1003f
+
+/* and now check for extended IRQ reasons */
+ cmp \irqnr,#1
+ bls 1003f
+ cmp \irqnr,#30
+ blo 1002f
+
+/* IRQ 31,30 : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+ ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+ moveq \irqnr,#SIC1_BASE_INT
+ ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+ movne \irqnr,#SIC2_BASE_INT
+ ldr \irqstat, [\base, #INTRC_STAT]
+ ldr \tmp, [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts */
+ and \irqstat,\irqstat,\tmp
+ b 1004f
+
+1003:
+/* IRQ 1,0 : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number */
+ ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+ movne \irqnr,#SIC1_BASE_INT
+ ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+ moveq \irqnr,#SIC2_BASE_INT
+ ldr \irqstat, [\base, #INTRC_STAT]
+ ldr \tmp, [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts */
+ bic \irqstat,\irqstat,\tmp
+
+1004:
+
+ cmp \irqstat,#1<<16
+ addhs \irqnr,\irqnr,#16
+ movhs \irqstat,\irqstat,lsr#16
+ cmp \irqstat,#1<<8
+ addhs \irqnr,\irqnr,#8
+ movhs \irqstat,\irqstat,lsr#8
+ cmp \irqstat,#1<<4
+ addhs \irqnr,\irqnr,#4
+ movhs \irqstat,\irqstat,lsr#4
+ cmp \irqstat,#1<<2
+ addhs \irqnr,\irqnr,#2
+ movhs \irqstat,\irqstat,lsr#2
+ cmp \irqstat,#1<<1
+ addhs \irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+ teq \irqstat,#0
+1003:
+ .endm
+
+
+ .macro irq_prio_table
+ .endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 0000000..9591467
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN (0)
+#define GPIO_OUT (0x100)
+#define GPIO_BID (0x200)
+#define GPIO_RAM (0x300)
+#define GPIO_MUX (0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00 (GPIO_IN | 0)
+#define GPI_01 (GPIO_IN | 1)
+#define GPI_02 (GPIO_IN | 2)
+#define GPI_03 (GPIO_IN | 3)
+#define GPI_04 (GPIO_IN | 4)
+#define GPI_05 (GPIO_IN | 5)
+#define GPI_06 (GPIO_IN | 6)
+#define GPI_07 (GPIO_IN | 7)
+#define GPI_08 (GPIO_IN | 8)
+#define GPI_09 (GPIO_IN | 9)
+#define U1_RX (GPIO_IN | 15)
+#define U2_HTCS (GPIO_IN | 16)
+#define U2_RX (GPIO_IN | 17)
+#define U3_RX (GPIO_IN | 18)
+#define U4_RX (GPIO_IN | 19)
+#define U5_RX (GPIO_IN | 20)
+#define U6_IRRX (GPIO_IN | 21)
+#define U7_HCTS (GPIO_IN | 22)
+#define U7_RX (GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN (GPIO_IN | 25)
+#define DISP_SYNC (GPIO_IN | 26)
+#define SPI2_DATIN (GPIO_IN | 27)
+#define GPI_11 (GPIO_IN | 28)
+
+#define GPIO_IN_MASK 0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00 (GPIO_OUT | 0)
+#define GPO_01 (GPIO_OUT | 1)
+#define GPO_02 (GPIO_OUT | 2)
+#define GPO_03 (GPIO_OUT | 3)
+#define GPO_04 (GPIO_OUT | 4)
+#define GPO_05 (GPIO_OUT | 5)
+#define GPO_06 (GPIO_OUT | 6)
+#define GPO_07 (GPIO_OUT | 7)
+#define GPO_08 (GPIO_OUT | 8)
+#define GPO_09 (GPIO_OUT | 9)
+#define GPO_10 (GPIO_OUT | 10)
+#define GPO_11 (GPIO_OUT | 11)
+#define GPO_12 (GPIO_OUT | 12)
+#define GPO_13 (GPIO_OUT | 13)
+#define GPO_14 (GPIO_OUT | 14)
+#define GPO_15 (GPIO_OUT | 15)
+#define GPO_16 (GPIO_OUT | 16)
+#define GPO_17 (GPIO_OUT | 17)
+#define GPO_18 (GPIO_OUT | 18)
+#define GPO_19 (GPIO_OUT | 19)
+#define GPO_20 (GPIO_OUT | 20)
+#define GPO_21 (GPIO_OUT | 21)
+#define GPO_22 (GPIO_OUT | 22)
+#define GPO_23 (GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK 0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19 (GPIO_RAM | 0)
+#define RAM_D20 (GPIO_RAM | 1)
+#define RAM_D21 (GPIO_RAM | 2)
+#define RAM_D22 (GPIO_RAM | 3)
+#define RAM_D23 (GPIO_RAM | 4)
+#define RAM_D24 (GPIO_RAM | 5)
+#define RAM_D25 (GPIO_RAM | 6)
+#define RAM_D26 (GPIO_RAM | 7)
+#define RAM_D27 (GPIO_RAM | 8)
+#define RAM_D28 (GPIO_RAM | 9)
+#define RAM_D29 (GPIO_RAM | 10)
+#define RAM_D30 (GPIO_RAM | 11)
+#define RAM_D31 (GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK 0x1fff
+
+/* I/O pins */
+#define GPIO_00 (GPIO_BID | 25)
+#define GPIO_01 (GPIO_BID | 26)
+#define GPIO_02 (GPIO_BID | 27)
+#define GPIO_03 (GPIO_BID | 28)
+#define GPIO_04 (GPIO_BID | 29)
+#define GPIO_05 (GPIO_BID | 30)
+
+#define GPIO_BID_MASK 0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK 0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT 32
+
+#define SE_U7_RX_INT 63
+#define SE_U7_HCTS_INT 62
+#define SE_BT_CLKREQ_INT 61
+#define SE_U6_IRRX_INT 60
+/*59 unused*/
+#define SE_U5_RX_INT 58
+#define SE_GPI_11_INT 57
+#define SE_U3_RX_INT 56
+#define SE_U2_HCTS_INT 55
+#define SE_U2_RX_INT 54
+#define SE_U1_RX_INT 53
+#define SE_DISP_SYNC_INT 52
+/*51 unused*/
+#define SE_SDIO_INT_N 50
+#define SE_MSDIO_START_INT 49
+#define SE_GPI_06_INT 48
+#define SE_GPI_05_INT 47
+#define SE_GPI_04_INT 46
+#define SE_GPI_03_INT 45
+#define SE_GPI_02_INT 44
+#define SE_GPI_01_INT 43
+#define SE_GPI_00_INT 42
+#define SE_SYSCLKEN_PIN_INT 41
+#define SE_SPI1_DATAIN_INT 40
+#define SE_GPI_07_INT 39
+#define SE_SPI2_DATAIN_INT 38
+#define SE_GPI_10_INT 37
+#define SE_GPI_09_INT 36
+#define SE_GPI_08_INT 35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT 0
+
+#define SE_TS_IRQ 31
+#define SE_TS_P_INT 30
+#define SE_TS_AUX_INT 29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT 25
+#define SE_RTC_INT 24
+#define SE_USB_NEED_CLK_INT 23
+#define SE_USB_INT 22
+#define SE_USB_I2C_INT 21
+#define SE_USB_OTG_TIMER_INT 20
+#define SE_USB_OTG_ATX_INT_N 19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT 17
+#define SE_KEY_IRQ 16
+#define SE_DSP_SLAVEPORT_INT 15
+#define SE_DSP_GPIO1_INT 14
+#define SE_DSP_GPIO0_INT 13
+#define SE_DSP_AHB_INT 12
+/*11-6 unused*/
+#define SE_GPIO_05_INT 5
+#define SE_GPIO_04_INT 4
+#define SE_GPIO_03_INT 3
+#define SE_GPIO_02_INT 2
+#define SE_GPIO_01_INT 1
+#define SE_GPIO_00_INT 0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+ __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif /* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 0000000..7b98b82
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE 0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-pnx4008/i2c.h
rename to arch/arm/mach-pnx4008/include/mach/i2c.h
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 0000000..c6206f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ * arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 0000000..2a690ca
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 0000000..f6b33cf
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS 96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT 64
+
+#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
+#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
+#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
+#define GPI_06_INT 92
+#define GPI_05_INT 91
+#define GPI_04_INT 90
+#define GPI_03_INT 89
+#define GPI_02_INT 88
+#define GPI_01_INT 87
+#define GPI_00_INT 86
+#define BT_CLKREQ_INT 85
+#define SPI1_DATIN_INT 84
+#define U5_RX_INT 83
+#define SDIO_INT_N 82
+#define CAM_HS_INT 81
+#define CAM_VS_INT 80
+#define GPI_07_INT 79
+#define DISP_SYNC_INT 78
+#define DSP_INT8 77
+#define U7_HCTS_INT 76
+#define GPI_10_INT 75
+#define GPI_09_INT 74
+#define GPI_08_INT 73
+#define DSP_INT7 72
+#define U2_HCTS_INT 71
+#define SPI2_DATIN_INT 70
+#define GPIO_05_INT 69
+#define GPIO_04_INT 68
+#define GPIO_03_INT 67
+#define GPIO_02_INT 66
+#define GPIO_01_INT 65
+#define GPIO_00_INT 64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT 32
+
+#define USB_I2C_INT 63
+#define USB_DEV_HP_INT 62
+#define USB_DEV_LP_INT 61
+#define USB_DEV_DMA_INT 60
+#define USB_HOST_INT 59
+#define USB_OTG_ATX_INT_N 58
+#define USB_OTG_TIMER_INT 57
+#define SW_INT 56
+#define SPI1_INT 55
+#define KEY_IRQ 54
+#define DSP_M_INT 53
+#define RTC_INT 52
+#define I2C_1_INT 51
+#define I2C_2_INT 50
+#define PLL1_LOCK_INT 49
+#define PLL2_LOCK_INT 48
+#define PLL3_LOCK_INT 47
+#define PLL4_LOCK_INT 46
+#define PLL5_LOCK_INT 45
+#define SPI2_INT 44
+#define DSP_INT1 43
+#define DSP_INT2 42
+#define DSP_TDM_INT2 41
+#define TS_AUX_INT 40
+#define TS_IRQ 39
+#define TS_P_INT 38
+#define UOUT1_TO_PAD_INT 37
+#define GPI_11_INT 36
+#define DSP_INT4 35
+#define JTAG_COMM_RX_INT 34
+#define JTAG_COMM_TX_INT 33
+#define DSP_INT3 32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT 0
+
+#define SUB2_FIQ_N 31 /*active low */
+#define SUB1_FIQ_N 30 /*active low */
+#define JPEG_INT 29
+#define DMA_INT 28
+#define MSTIMER_INT 27
+#define IIR1_INT 26
+#define IIR2_INT 25
+#define IIR7_INT 24
+#define DSP_TDM_INT0 23
+#define DSP_TDM_INT1 22
+#define DSP_P_INT 21
+#define DSP_INT0 20
+#define DUM_INT 19
+#define UOUT0_TO_PAD_INT 18
+#define MP4_ENC_INT 17
+#define MP4_DEC_INT 16
+#define SD0_INT 15
+#define MBX_INT 14
+#define SD1_INT 13
+#define MS_INT_N 12
+#define FLASH_INT 11 /*NAND*/
+#define IIR6_INT 10
+#define IIR5_INT 9
+#define IIR4_INT 8
+#define IIR3_INT 7
+#define WATCH_INT 6
+#define HSTIMER_INT 5
+#define ARCH_TIMER_IRQ HSTIMER_INT
+#define CAM_INT 4
+#define PRNG_INT 3
+#define CRYPTO_INT 2
+#define SUB2_IRQ_N 1 /*active low */
+#define SUB1_IRQ_N 0 /*active low */
+
+#define PNX4008_IRQ_TYPES \
+{ /*IRQ #'s: */ \
+IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \
+IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \
+IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT 32
+
+#define SE_U7_RX_INT 63
+#define SE_U7_HCTS_INT 62
+#define SE_BT_CLKREQ_INT 61
+#define SE_U6_IRRX_INT 60
+/*59 unused*/
+#define SE_U5_RX_INT 58
+#define SE_GPI_11_INT 57
+#define SE_U3_RX_INT 56
+#define SE_U2_HCTS_INT 55
+#define SE_U2_RX_INT 54
+#define SE_U1_RX_INT 53
+#define SE_DISP_SYNC_INT 52
+/*51 unused*/
+#define SE_SDIO_INT_N 50
+#define SE_MSDIO_START_INT 49
+#define SE_GPI_06_INT 48
+#define SE_GPI_05_INT 47
+#define SE_GPI_04_INT 46
+#define SE_GPI_03_INT 45
+#define SE_GPI_02_INT 44
+#define SE_GPI_01_INT 43
+#define SE_GPI_00_INT 42
+#define SE_SYSCLKEN_PIN_INT 41
+#define SE_SPI1_DATAIN_INT 40
+#define SE_GPI_07_INT 39
+#define SE_SPI2_DATAIN_INT 38
+#define SE_GPI_10_INT 37
+#define SE_GPI_09_INT 36
+#define SE_GPI_08_INT 35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT 0
+
+#define SE_TS_IRQ 31
+#define SE_TS_P_INT 30
+#define SE_TS_AUX_INT 29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT 25
+#define SE_RTC_INT 24
+#define SE_USB_NEED_CLK_INT 23
+#define SE_USB_INT 22
+#define SE_USB_I2C_INT 21
+#define SE_USB_OTG_TIMER_INT 20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 0000000..5789a2d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 0000000..6ea02f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 0000000..368c2c1
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE 0x08000000
+#define PNX4008_IRAM_SIZE 0x00010000
+#define PNX4008_YUV_SLAVE_BASE 0x10000000
+#define PNX4008_DUM_SLAVE_BASE 0x18000000
+#define PNX4008_NDF_FLASH_BASE 0x20020000
+#define PNX4008_SPI1_BASE 0x20088000
+#define PNX4008_SPI2_BASE 0x20090000
+#define PNX4008_SD_CONFIG_BASE 0x20098000
+#define PNX4008_FLASH_DATA 0x200B0000
+#define PNX4008_MLC_FLASH_BASE 0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE 0x300A0000
+#define PNX4008_DMA_CONFIG_BASE 0x31000000
+#define PNX4008_USB_CONFIG_BASE 0x31020000
+#define PNX4008_SDRAM_CFG_BASE 0x31080000
+#define PNX4008_AHB2FAB_BASE 0x40000000
+#define PNX4008_PWRMAN_BASE 0x40004000
+#define PNX4008_INTCTRLMIC_BASE 0x40008000
+#define PNX4008_INTCTRLSIC1_BASE 0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE 0x40010000
+#define PNX4008_HSUART1_BASE 0x40014000
+#define PNX4008_HSUART2_BASE 0x40018000
+#define PNX4008_HSUART7_BASE 0x4001C000
+#define PNX4008_RTC_BASE 0x40024000
+#define PNX4008_PIO_BASE 0x40028000
+#define PNX4008_MSTIMER_BASE 0x40034000
+#define PNX4008_HSTIMER_BASE 0x40038000
+#define PNX4008_WDOG_BASE 0x4003C000
+#define PNX4008_DEBUG_BASE 0x40040000
+#define PNX4008_TOUCH1_BASE 0x40048000
+#define PNX4008_KEYSCAN_BASE 0x40050000
+#define PNX4008_UARTCTRL_BASE 0x40054000
+#define PNX4008_PWM_BASE 0x4005C000
+#define PNX4008_UART3_BASE 0x40080000
+#define PNX4008_UART4_BASE 0x40088000
+#define PNX4008_UART5_BASE 0x40090000
+#define PNX4008_UART6_BASE 0x40098000
+#define PNX4008_I2C1_BASE 0x400A0000
+#define PNX4008_I2C2_BASE 0x400A8000
+#define PNX4008_MAGICGATE_BASE 0x400B0000
+#define PNX4008_DUMCONF_BASE 0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE 0x400BC000
+#define PNX4008_DSP_BASE 0x400C0000
+#define PNX4008_PROFCOUNTER_BASE 0x400C8000
+#define PNX4008_CRYPTO_BASE 0x400D0000
+#define PNX4008_CAMIFCONF_BASE 0x400D8000
+#define PNX4008_YUV2RGB_BASE 0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE 0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 0000000..2fa685b
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 0000000..8985a46
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 0000000..956fbd8e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE 1000000
+
+#define TICKS2USECS(x) (x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT 1
+#define RESET_COUNT0 (1<<1)
+#define STOP_COUNT0 (1<<2)
+#define MR1_INT (1<<3)
+#define RESET_COUNT1 (1<<4)
+#define STOP_COUNT1 (1<<5)
+#define MR2_INT (1<<6)
+#define RESET_COUNT2 (1<<7)
+#define STOP_COUNT2 (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB 1
+#define RESET_COUNT (1<<1)
+#define DEBUG_EN (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT 1
+#define MATCH1_INT (1<<1)
+#define MATCH2_INT (1<<2)
+#define RTC_TICK0 (1<<4)
+#define RTC_TICK1 (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 0000000..bb4751e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+ while (UART5_FR & (1 << 5))
+ barrier();
+
+ UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 0000000..2ad3983
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 7eba292..5c4f55a 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,7 +23,7 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
@@ -32,7 +32,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 52c51f9..f970906d 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -21,8 +21,8 @@
#include <asm/io.h>
#include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index a95bd19..9be84bb 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
#include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
#define UART_3 0
#define UART_4 1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fe6bdcd..f4eed49 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
#define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 616cb3e..1809752 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
#include <linux/irq.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892a..5c67b18 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
/* MAX7310 Regiser Map */
#define MAX7310_INPUT 0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index d858f98..c01eea8 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 31f5bd4..2d5bcea 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -22,7 +22,7 @@
#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 402e807..af003a2 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -23,14 +23,14 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
#include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index c0c81b7..abce13c 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 8c43e27..123a950 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -35,14 +35,14 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index b08290b..311baf1 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index abd8b13..35bbfcc 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 21e616f..8e2f221 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 8f6075a..6f5569b 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#ifdef DEBUG
static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 84489dc..35736fc 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,19 +4,19 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 2532b6d..c0be17e 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
struct dma_channel {
char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
index 16c0236..2638841 100644
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -14,8 +14,8 @@
#include <linux/module.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
static struct pxafb_mode_info e400_pxafb_mode_info = {
.pixclock = 140703,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e5cc6ca..7a0a681 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,14 +23,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c29b7b2..0394245 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,7 +14,7 @@
#include <asm/setup.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
index 362847a..d622c04 100644
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -14,10 +14,10 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/eseries-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0143eed..cc3d850 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -18,13 +18,13 @@
#include <linux/pwm_backlight.h>
#include <asm/setup.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/i2c.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 2106028..2834b7f 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,12 +20,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 1f34f23..07acc1b 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
#include <linux/sysdev.h>
#include <asm/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 2bc0636..c009247 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -34,13 +34,13 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index a994292..5aa0270 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
#include "generic.h"
#include "devices.h"
diff --git a/include/asm-arm/arch-pxa/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
similarity index 100%
rename from include/asm-arm/arch-pxa/akita.h
rename to arch/arm/mach-pxa/include/mach/akita.h
diff --git a/include/asm-arm/arch-pxa/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/audio.h
rename to arch/arm/mach-pxa/include/mach/audio.h
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
similarity index 100%
rename from include/asm-arm/arch-pxa/bitfield.h
rename to arch/arm/mach-pxa/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-pxa/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
similarity index 100%
rename from include/asm-arm/arch-pxa/camera.h
rename to arch/arm/mach-pxa/include/mach/camera.h
diff --git a/include/asm-arm/arch-pxa/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
similarity index 100%
rename from include/asm-arm/arch-pxa/colibri.h
rename to arch/arm/mach-pxa/include/mach/colibri.h
diff --git a/include/asm-arm/arch-pxa/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
similarity index 100%
rename from include/asm-arm/arch-pxa/corgi.h
rename to arch/arm/mach-pxa/include/mach/corgi.h
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 0000000..55d6a17
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x40000000 @ physical
+ movne \rx, #io_p2v(0x40000000) @ virtual
+ orr \rx, \rx, #0x00100000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 0000000..955bfe6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-pxa/include/mach/dma.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+ volatile u32 ddadr; /* Points to the next descriptor + flags */
+ volatile u32 dsadr; /* DSADR value for the current transfer */
+ volatile u32 dtadr; /* DTADR value for the current transfer */
+ volatile u32 dcmd; /* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK 1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 0000000..de16c12
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
+ mov \tmp, \tmp, lsr #13
+ and \tmp, \tmp, #0x7 @ Core G
+ cmp \tmp, #1
+ bhi 1004f
+
+ mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
+ add \base, \base, #0x00d00000
+ ldr \irqstat, [\base, #0] @ ICIP
+ ldr \irqnr, [\base, #4] @ ICMR
+ b 1002f
+
+1004:
+ mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
+ mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
+ ands \irqnr, \irqstat, \irqnr
+ beq 1003f
+ rsb \irqstat, \irqnr, #0
+ and \irqstat, \irqstat, \irqnr
+ clz \irqnr, \irqstat
+ rsb \irqnr, \irqnr, #31
+ add \irqnr, \irqnr, #32
+ b 1001f
+1003:
+ mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
+ mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
+1002:
+ ands \irqnr, \irqstat, \irqnr
+ beq 1001f
+ rsb \irqstat, \irqnr, #0
+ and \irqstat, \irqstat, \irqnr
+ clz \irqnr, \irqstat
+ rsb \irqnr, \irqnr, #31
+1001:
+ .endm
diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/eseries-gpio.h
rename to arch/arm/mach-pxa/include/mach/eseries-gpio.h
diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
similarity index 100%
rename from include/asm-arm/arch-pxa/eseries-irq.h
rename to arch/arm/mach-pxa/include/mach/eseries-irq.h
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 0000000..2c538d8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+ return GPLR(gpio) & GPIO_bit(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+ if (value)
+ GPSR(gpio) = GPIO_bit(gpio);
+ else
+ GPCR(gpio) = GPIO_bit(gpio);
+ } else {
+ __gpio_set_value(gpio, value);
+ }
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
+#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 0000000..42ee195
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET 7
+#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn 81
+#define GPIO_GUMSTIX_USB_GPIOx 83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn 35
+#define GPIO_GUMSTIX_USB_GPIOx 41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST 80
+#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST 52
+#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0 36
+#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1 27
+#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET 8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1 4
+#define GPIO4_nSTSCHG GPIO4_nBVD1
+#define GPIO11_nCD 11
+#define GPIO26_PRDY_nBSY 26
+#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1 18
+#define GPIO18_nSTSCHG GPIO18_nBVD1
+#define GPIO36_nCD 36
+#define GPIO27_PRDY_nBSY 27
+#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 0000000..f8fb1e7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,240 @@
+/*
+ * arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE 0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0 0xff000000
+#define UNCACHED_ADDR UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+ especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y) \
+ (*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x) (io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xf3f; \
+ _id == 0x212; \
+ })
+
+#define __cpu_is_pxa255(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x2d0; \
+ })
+
+#define __cpu_is_pxa25x(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x2d0 || _id == 0x290; \
+ })
+#else
+#define __cpu_is_pxa21x(id) (0)
+#define __cpu_is_pxa255(id) (0)
+#define __cpu_is_pxa25x(id) (0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x411; \
+ })
+#else
+#define __cpu_is_pxa27x(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x688; \
+ })
+#else
+#define __cpu_is_pxa300(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x689; \
+ })
+#else
+#define __cpu_is_pxa310(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x603 || _id == 0x682; \
+ })
+#else
+#define __cpu_is_pxa320(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x683; \
+ })
+#else
+#define __cpu_is_pxa930(id) (0)
+#endif
+
+#define cpu_is_pxa21x() \
+ ({ \
+ __cpu_is_pxa21x(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa255() \
+ ({ \
+ __cpu_is_pxa255(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa25x() \
+ ({ \
+ __cpu_is_pxa25x(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa27x() \
+ ({ \
+ __cpu_is_pxa27x(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa300() \
+ ({ \
+ __cpu_is_pxa300(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa310() \
+ ({ \
+ __cpu_is_pxa310(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa320() \
+ ({ \
+ __cpu_is_pxa320(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa930() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa930(id); \
+ })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 13 & 0x7; \
+ _id <= 0x2; \
+ })
+
+#define __cpu_is_pxa3xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 13 & 0x7; \
+ _id == 0x3; \
+ })
+
+#define cpu_is_pxa2xx() \
+ ({ \
+ __cpu_is_pxa2xx(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa3xx() \
+ ({ \
+ __cpu_is_pxa3xx(read_cpuid_id()); \
+ })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO 0
+#define PCIBIOS_MIN_MEM 0
+#define pcibios_assign_all_busses() 1
+#endif
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-pxa/i2c.h
rename to arch/arm/mach-pxa/include/mach/i2c.h
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 0000000..5eff96f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ * arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ * Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ * <http://www.vibren.com> <http://bec-systems.com>
+ * Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS)
+#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT (0xf0000000)
+#define IDP_COREVOLT_SIZE (1*1024*1024)
+
+#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE (1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+# define __CPLD_REG(x) CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0 (1 << 0)
+#define PCC0_PWR1 (1 << 1)
+#define PCC0_PWR2 (1 << 2)
+#define PCC0_PWR3 (1 << 3)
+#define PCC1_PWR0 (1 << 4)
+#define PCC1_PWR1 (1 << 5)
+#define PCC1_PWR2 (1 << 6)
+#define PCC1_PWR3 (1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET (1 << 6)
+#define PCC1_RESET (1 << 7)
+#define PCC0_ENABLE (1 << 0)
+#define PCC1_ENABLE (1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT (1 << 7) // 7-4 read as low true
+#define _PCC_RESET (1 << 6)
+#define _PCC_IRQ (1 << 5)
+#define _PCC_INPACK (1 << 4)
+#define PCC_BVD2 (1 << 3)
+#define PCC_BVD1 (1 << 2)
+#define PCC_VS2 (1 << 1)
+#define PCC_VS1 (1 << 0)
+
+#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ IRQ_GPIO(5)
+#define IDE_IRQ IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED (1<<5)
+#define IDP_BUSY_LED (1<<6)
+
+#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS 7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS 14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US 100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+ IDP_CPLD_KB_COL_LOW = outputs;\
+ IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+ inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 0000000..600fd4f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
similarity index 100%
rename from include/asm-arm/arch-pxa/irda.h
rename to arch/arm/mach-pxa/include/mach/irda.h
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 0000000..32772bc
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,264 @@
+/*
+ * arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x) (x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
+#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
+#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
+#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */
+#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
+#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
+#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */
+#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
+#define IRQ_USB PXA_IRQ(11) /* USB Service */
+#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
+#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */
+#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
+#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */
+#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
+#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
+#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
+#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
+#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
+#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
+#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */
+#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */
+#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */
+#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */
+#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */
+#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */
+#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */
+#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
+#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
+#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
+#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
+#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
+#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
+#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
+#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
+#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
+#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
+#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE (64)
+#define PXA_GPIO_IRQ_NUM (128)
+
+#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START (IRQ_BOARD_END)
+#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
+#define SSPXMTINT (IRQ_BOARD_END + 24)
+#define SSPRCVINT (IRQ_BOARD_END + 25)
+#define SSPROR (IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
+#define AUDTFSR (IRQ_BOARD_END + 36)
+#define AUDRFSR (IRQ_BOARD_END + 37)
+#define AUDTUR (IRQ_BOARD_END + 38)
+#define AUDROR (IRQ_BOARD_END + 39)
+#define AUDDTS (IRQ_BOARD_END + 40)
+#define AUDRDD (IRQ_BOARD_END + 41)
+#define AUDSTO (IRQ_BOARD_END + 42)
+#define IRQ_USBPWR (IRQ_BOARD_END + 43)
+#define IRQ_HCIM (IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START (IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+ defined(CONFIG_MACH_LOGICPD_PXA270) || \
+ defined(CONFIG_MACH_TOSA) || \
+ defined(CONFIG_MACH_MAINSTONE) || \
+ defined(CONFIG_MACH_PCM027) || \
+ defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS (IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS (IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS (IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs. Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
+#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
+#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
+#define LPD270_AC97_IRQ LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT 9
+#define IT8152_LP_IRQ_COUNT 16
+#define IT8152_PD_IRQ_COUNT 15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
similarity index 100%
rename from include/asm-arm/arch-pxa/littleton.h
rename to arch/arm/mach-pxa/include/mach/littleton.h
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 0000000..f89fb71
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author: Lennert Buytenhek
+ * Created: Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT 0xf0000000
+#define LPD270_CPLD_SIZE 0x00100000
+
+#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers */
+#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
+#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 0000000..4cb2415
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT (0xf0000000)
+#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x)))
+#else
+# define __LUB_REG(x) LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 0000000..38d68d9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER 0
+#define GPIO9_MAGICIAN_UNKNOWN 9
+#define GPIO10_MAGICIAN_GSM_IRQ 10
+#define GPIO11_MAGICIAN_GSM_OUT1 11
+#define GPIO13_MAGICIAN_CPLD_IRQ 13
+#define GPIO18_MAGICIAN_UNKNOWN 18
+#define GPIO22_MAGICIAN_VIBRA_EN 22
+#define GPIO26_MAGICIAN_GSM_POWER 26
+#define GPIO27_MAGICIAN_USBC_PUEN 27
+#define GPIO30_MAGICIAN_nCHARGE_EN 30
+#define GPIO37_MAGICIAN_KEY_HANGUP 37
+#define GPIO38_MAGICIAN_KEY_CONTACTS 38
+#define GPIO40_MAGICIAN_GSM_OUT2 40
+#define GPIO48_MAGICIAN_UNKNOWN 48
+#define GPIO56_MAGICIAN_UNKNOWN 56
+#define GPIO57_MAGICIAN_CAM_RESET 57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER 75
+#define GPIO83_MAGICIAN_nIR_EN 83
+#define GPIO86_MAGICIAN_GSM_RESET 86
+#define GPIO87_MAGICIAN_GSM_SELECT 87
+#define GPIO90_MAGICIAN_KEY_CALENDAR 90
+#define GPIO91_MAGICIAN_KEY_CAMERA 91
+#define GPIO93_MAGICIAN_KEY_UP 93
+#define GPIO94_MAGICIAN_KEY_DOWN 94
+#define GPIO95_MAGICIAN_KEY_LEFT 95
+#define GPIO96_MAGICIAN_KEY_RIGHT 96
+#define GPIO97_MAGICIAN_KEY_ENTER 97
+#define GPIO98_MAGICIAN_KEY_RECORD 98
+#define GPIO99_MAGICIAN_HEADPHONE_IN 99
+#define GPIO100_MAGICIAN_KEY_VOL_UP 100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
+#define GPIO102_MAGICIAN_KEY_PHONE 102
+#define GPIO103_MAGICIAN_LED_KP 103
+#define GPIO104_MAGICIAN_LCD_POWER_1 104
+#define GPIO105_MAGICIAN_LCD_POWER_2 105
+#define GPIO106_MAGICIAN_LCD_POWER_3 106
+#define GPIO107_MAGICIAN_DS1WM_IRQ 107
+#define GPIO108_MAGICIAN_GSM_READY 108
+#define GPIO114_MAGICIAN_UNKNOWN 114
+#define GPIO115_MAGICIAN_nPEN_IRQ 115
+#define GPIO116_MAGICIAN_nCAM_EN 116
+#define GPIO119_MAGICIAN_UNKNOWN 119
+#define GPIO120_MAGICIAN_UNKNOWN 120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+ (MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 0000000..3461c43
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 14, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS PXA_CS2_PHYS
+#define MST_FPGA_VIRT (0xf0000000)
+#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x) MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1 __MST_REG(0x08000010)
+#define MST_LEDDAT2 __MST_REG(0x08000014)
+#define MST_LEDCTRL __MST_REG(0x08000040)
+#define MST_GPSWR __MST_REG(0x08000060)
+#define MST_MSCWR1 __MST_REG(0x08000080)
+#define MST_MSCWR2 __MST_REG(0x08000084)
+#define MST_MSCWR3 __MST_REG(0x08000088)
+#define MST_MSCRD __MST_REG(0x08000090)
+#define MST_INTMSKENA __MST_REG(0x080000c0)
+#define MST_INTSETCLR __MST_REG(0x080000d0)
+#define MST_PCMCIA0 __MST_REG(0x080000e0)
+#define MST_PCMCIA1 __MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */
+#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */
+#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */
+#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */
+#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */
+#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */
+#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */
+#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
+#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */
+#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */
+#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */
+#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */
+#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */
+#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 0000000..552eb7f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff
+ * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff
+ * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff
+ * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS 26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+ unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+ cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 0000000..6c8e722
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 0000000..122bdbd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE: for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 0000000..3e92115
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ * MFP_PIN(x)
+ * MFP_AFx
+ * MFP_LPM_DRIVE_{LOW, HIGH}
+ * MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit 23 - Input/Output (PXA2xx specific)
+ * bit 24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN (0x0 << 23)
+#define MFP_DIR_OUT (0x1 << 23)
+#define MFP_DIR_MASK (0x1 << 23)
+#define MFP_DIR(x) (((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE: pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 0000000..bc1fb33
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)
+#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT)
+#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT)
+#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT)
+#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT)
+#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT)
+#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT)
+#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT)
+#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT)
+#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT)
+#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT)
+#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X)
+#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT)
+#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT)
+#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT)
+#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT)
+#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT)
+#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT)
+#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT)
+#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT)
+#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
+#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT)
+#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT)
+#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT)
+#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT)
+#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT)
+#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT)
+#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT)
+#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
+#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT)
+#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT)
+#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT)
+#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT)
+#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT)
+#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT)
+#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT)
+#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT)
+#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT)
+#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT)
+#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT)
+#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT)
+#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT)
+#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT)
+#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT)
+#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT)
+#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2)
+#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2)
+#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3)
+#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1)
+#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5)
+#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3)
+#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2)
+#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5)
+#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3)
+#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2)
+#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1)
+#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5)
+#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1)
+#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3)
+#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3)
+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3)
+#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3)
+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4)
+#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2)
+#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7)
+#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4)
+#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2)
+#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1)
+#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2)
+#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3)
+#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2)
+#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3)
+#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3)
+#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4)
+#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3)
+#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7)
+#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5)
+#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3)
+#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3)
+#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3)
+#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3)
+#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3)
+#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3)
+#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3)
+#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3)
+#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3)
+#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 0000000..7499051
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
similarity index 100%
rename from include/asm-arm/arch-pxa/mfp-pxa3xx.h
rename to arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 0000000..fabd9b4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62 MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 0000000..8769567
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m) ((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+
+ /* additional pins on PXA930 */
+ MFP_PIN_GSIM_UIO,
+ MFP_PIN_GSIM_UCLK,
+ MFP_PIN_GSIM_UDET,
+ MFP_PIN_GSIM_nURST,
+ MFP_PIN_PMIC_INT,
+ MFP_PIN_RDY,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x) ((x) & 0x3ff)
+
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_MASK (0x3 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/mmc.h
rename to arch/arm/mach-pxa/include/mach/mmc.h
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 0000000..351f32f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,37 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 2, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending() (ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime() (OSCR)
+#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period. This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
similarity index 100%
rename from include/asm-arm/arch-pxa/ohci.h
rename to arch/arm/mach-pxa/include/mach/ohci.h
diff --git a/include/asm-arm/arch-pxa/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
similarity index 100%
rename from include/asm-arm/arch-pxa/palmtx.h
rename to arch/arm/mach-pxa/include/mach/palmtx.h
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 0000000..4dcd2e8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO 0
+#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC 0x51 /* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM 0x54 /* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO 52
+#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS PXA_CS5_PHYS
+#define PCM027_ETH_SIZE (1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO 114
+#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS 0x22000000
+#define PCM027_CAN_SIZE 0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO 27
+#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS 24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS 0x00000000
+#define PCM027_FLASH_SIZE 0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU 90
+#define PCM027_LED_HEARD_BEAT 91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 0000000..8a4383b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO 9
+#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
+#define PCM990_CTRL_BASE 0xea000000
+#define PCM990_CTRL_SIZE (1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO 14
+#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
+#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */
+#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */
+#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */
+
+#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */
+#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */
+#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */
+
+#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */
+#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */
+
+#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */
+#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */
+#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */
+#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */
+#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */
+#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */
+#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */
+#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */
+
+#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __PCM990_CTRL_REG(x) \
+ (*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO 13
+#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
+#define PCM990_IDE_PLD_BASE 0xee000000
+#define PCM990_IDE_PLD_SIZE (1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */
+#define PCM990_IDE_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */
+#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */
+#define PCM990_IDE_RDY 0x0008 /* RDY */
+
+#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */
+#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */
+#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */
+#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __PCM990_IDE_PLD_REG(x) \
+ (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO 11
+#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO 12
+#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
+#define PCM990_CF_PLD_BASE 0xef000000
+#define PCM990_CF_PLD_SIZE (1*1024*1024)
+#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */
+#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */
+#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+# define __PCM990_CF_PLD_REG(x) \
+ (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO 10
+#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO 9
+#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pm.h
rename to arch/arm/mach-pxa/include/mach/pm.h
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 0000000..8956afe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Based on:
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ * 04-06-2001 Lineo Japan, Inc.
+ * 04-16-2001 SHARP Corporation
+ * Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H 1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY (0)
+#define POODLE_GPIO_AC_IN (1)
+#define POODLE_GPIO_CO 16
+#define POODLE_GPIO_TP_INT (5)
+#define POODLE_GPIO_WAKEUP (11) /* change battery */
+#define POODLE_GPIO_GA_INT (10)
+#define POODLE_GPIO_IR_ON (22)
+#define POODLE_GPIO_HP_IN (4)
+#define POODLE_GPIO_CF_IRQ (17)
+#define POODLE_GPIO_CF_CD (14)
+#define POODLE_GPIO_CF_STSCHG (14)
+#define POODLE_GPIO_SD_PWR (33)
+#define POODLE_GPIO_SD_PWR1 (3)
+#define POODLE_GPIO_nSD_CLK (6)
+#define POODLE_GPIO_nSD_WP (7)
+#define POODLE_GPIO_nSD_INT (8)
+#define POODLE_GPIO_nSD_DETECT (9)
+#define POODLE_GPIO_MAIN_BAT_LOW (13)
+#define POODLE_GPIO_BAT_COVER (13)
+#define POODLE_GPIO_USB_PULLUP (20)
+#define POODLE_GPIO_ADC_TEMP_ON (21)
+#define POODLE_GPIO_BYPASS_ON (36)
+#define POODLE_GPIO_CHRG_ON (38)
+#define POODLE_GPIO_CHRG_FULL (16)
+#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT ( 0 )
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 0000000..12288ca
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,1070 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
+#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
+#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
+#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
+#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
+#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
+#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
+#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
+#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
+#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
+#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
+#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
+#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
+#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
+#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
+#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x) __REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+#endif
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
+#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
+
+#define DRCMR(n) (*(((n) < 64) ? \
+ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+ &__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */
+#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23 __REG(0x4000015c) /* Reserved */
+#define DRCMR24 __REG(0x40000160) /* Reserved */
+#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29 __REG(0x40000174) /* Reserved */
+#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34 __REG(0x40000188) /* Reserved */
+#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39 __REG(0x4000019C) /* Reserved */
+#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */
+#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR DRCMR2
+#define DRCMRTXSADR DRCMR3
+#define DRCMRRXBTRBR DRCMR4
+#define DRCMRTXBTTHR DRCMR5
+#define DRCMRRXFFRBR DRCMR6
+#define DRCMRTXFFTHR DRCMR7
+#define DRCMRRXMCDR DRCMR8
+#define DRCMRRXMODR DRCMR9
+#define DRCMRTXMODR DRCMR10
+#define DRCMRRXPCDR DRCMR11
+#define DRCMRTXPCDR DRCMR12
+#define DRCMRRXSSDR DRCMR13
+#define DRCMRTXSSDR DRCMR14
+#define DRCMRRXSS2DR DRCMR15
+#define DRCMRTXSS2DR DRCMR16
+#define DRCMRRXICDR DRCMR17
+#define DRCMRTXICDR DRCMR18
+#define DRCMRRXSTRBR DRCMR19
+#define DRCMRTXSTTHR DRCMR20
+#define DRCMRRXMMC DRCMR21
+#define DRCMRTXMMC DRCMR22
+#define DRCMRRXSS3DR DRCMR66
+#define DRCMRTXSS3DR DRCMR67
+#define DRCMRUDC(x) DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
+
+#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
+#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
+#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
+#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
+#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
+#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
+#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
+#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
+#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
+#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
+#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
+#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
+#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
+#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
+#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
+#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
+#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
+#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
+#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
+#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
+#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
+#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
+#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
+#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
+#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
+#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
+#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
+#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
+#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
+#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
+#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
+#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
+#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
+#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
+#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
+#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
+#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
+#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
+#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
+#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
+#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
+#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
+#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
+#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
+#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
+#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
+#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
+#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x) __REG2(0x40000200, (x) << 4)
+#define DSADR(x) __REG2(0x40000204, (x) << 4)
+#define DTADR(x) __REG2(0x40000208, (x) << 4)
+#define DCMD(x) __REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
+#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
+#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
+#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
+#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
+#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START (1 << 0) /* start bit */
+#define ICR_STOP (1 << 1) /* stop bit */
+#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
+#define ICR_TB (1 << 3) /* transfer byte bit */
+#define ICR_MA (1 << 4) /* master abort */
+#define ICR_SCLE (1 << 5) /* master clock enable */
+#define ICR_IUE (1 << 6) /* unit enable */
+#define ICR_GCD (1 << 7) /* general call disable */
+#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
+#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
+#define ICR_BEIE (1 << 10) /* enable bus error ints */
+#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
+#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
+#define ICR_SADIE (1 << 13) /* slave address detected int enable */
+#define ICR_UR (1 << 14) /* unit reset */
+
+#define ISR_RWM (1 << 0) /* read/write mode */
+#define ISR_ACKNAK (1 << 1) /* ack/nak status */
+#define ISR_UB (1 << 2) /* unit busy */
+#define ISR_IBB (1 << 3) /* bus busy */
+#define ISR_SSD (1 << 4) /* slave stop detected */
+#define ISR_ALD (1 << 5) /* arbitration loss detected */
+#define ISR_ITE (1 << 6) /* tx buffer empty */
+#define ISR_IRF (1 << 7) /* rx buffer full */
+#define ISR_GCAD (1 << 8) /* general call address detected */
+#define ISR_SAD (1 << 9) /* slave address detected */
+#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
+#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
+#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
+#define SACR0_ENB (1 << 0) /* Enable I2S Link */
+#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
+#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
+#define SACR1_DREC (1 << 3) /* Disable Recording Function */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF (1 << 7) /* Controller Status */
+#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
+#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
+#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
+#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
+#define SASR0_BSY (1 << 2) /* I2S Busy */
+#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
+#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
+
+#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
+#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+#define POSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+#define MOSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP __REG(0x40800000) /* Start of FICP area */
+#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
+#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
+#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
+#define ICDR __REG(0x4080000c) /* ICP Data Register */
+#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
+#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+
+#define ICCR0_AME (1 << 7) /* Address match enable */
+#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RXE (1 << 4) /* Receive enable */
+#define ICCR0_TXE (1 << 3) /* Transmit enable */
+#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
+#define ICCR0_LBM (1 << 1) /* Loopback mode */
+#define ICCR0_ITR (1 << 0) /* IrDA transmission */
+
+#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
+#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
+#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
+#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
+#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE (1 << 5) /* Framing error */
+#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
+#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
+#define ICSR0_RAB (1 << 2) /* Receiver abort */
+#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
+#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
+
+#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
+#define ICSR1_CRE (1 << 5) /* CRC error */
+#define ICSR1_EOF (1 << 4) /* End of frame */
+#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
+#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
+#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
+#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
+#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
+#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0 __REG(0x50000000)
+#define CICR1 __REG(0x50000004)
+#define CICR2 __REG(0x50000008)
+#define CICR3 __REG(0x5000000C)
+#define CICR4 __REG(0x50000010)
+#define CISR __REG(0x50000014)
+#define CIFR __REG(0x50000018)
+#define CITOR __REG(0x5000001C)
+#define CIBR0 __REG(0x50000028)
+#define CIBR1 __REG(0x50000030)
+#define CIBR2 __REG(0x50000038)
+
+#define CICR0_DMAEN (1 << 31) /* DMA request enable */
+#define CICR0_PAR_EN (1 << 30) /* Parity enable */
+#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
+#define CICR0_ENB (1 << 28) /* Camera interface enable */
+#define CICR0_DIS (1 << 27) /* Camera interface disable */
+#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
+#define CICR0_TOM (1 << 9) /* Time-out mask */
+#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
+#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
+#define CICR0_EOLM (1 << 6) /* End-of-line mask */
+#define CICR0_PERRM (1 << 5) /* Parity-error mask */
+#define CICR0_QDM (1 << 4) /* Quick-disable mask */
+#define CICR0_CDM (1 << 3) /* Disable-done mask */
+#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
+#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
+#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
+
+#define CICR1_TBIT (1 << 31) /* Transparency bit */
+#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
+#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
+#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
+#define CICR1_RGB_F (1 << 11) /* RGB format */
+#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
+#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
+#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
+#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
+#define CICR1_DW (0x7 << 0) /* Data width mask */
+
+#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
+ wait count mask */
+#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
+ wait count mask */
+#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
+#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR2_FSW (0x7 << 0) /* Frame stabilization
+ wait count mask */
+
+#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
+ wait count mask */
+#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
+ wait count mask */
+#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
+#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
+
+#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
+#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
+#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
+#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
+#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
+#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
+#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
+
+#define CISR_FTO (1 << 15) /* FIFO time-out */
+#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
+#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
+#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
+#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
+#define CISR_EOL (1 << 8) /* End of line */
+#define CISR_PAR_ERR (1 << 7) /* Parity error */
+#define CISR_CQD (1 << 6) /* Camera interface quick disable */
+#define CISR_CDD (1 << 5) /* Camera interface disable done */
+#define CISR_SOF (1 << 4) /* Start of frame */
+#define CISR_EOF (1 << 3) /* End of frame */
+#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
+#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
+#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
+#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
+#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
+#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
+#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
+#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
+#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
+
+#define SRAM_SIZE 0x40000 /* 4x64K */
+
+#define SRAM_MEM_PHYS 0x5C000000
+
+#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
+#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
+#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
+
+#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
+#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
+#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
+
+#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
+#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
+#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
+
+#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
+#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
+#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
+
+#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
+#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
+
+#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
+#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
+
+#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
+#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
+
+#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
+#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
+
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS (0x4C000000)
+#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
+
+#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa25x-udc.h
rename to arch/arm/mach-pxa/include/mach/pxa25x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa27x-udc.h
rename to arch/arm/mach-pxa/include/mach/pxa27x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa27x_keypad.h
rename to arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa2xx-gpio.h
rename to arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 0000000..806ecfe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ * Taken from pxa-regs.h by Russell King
+ *
+ * Author: Nicolas Pitre
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
+#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
+#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
+#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
+#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
+#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME: PCMD_SQC need be checked. */
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
+
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
+#define PSSR_RDH (1 << 5) /* Read Disable Hold */
+#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
+#define PSSR_STS (1 << 3) /* Standby Mode Status */
+#define PSSR_VFS (1 << 2) /* VDD Fault Status */
+#define PSSR_BFS (1 << 1) /* Battery Fault Status */
+#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+
+#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
+#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
+#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
+#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
+#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
+#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR (1 << 3) /* GPIO Reset */
+#define RCSR_SMR (1 << 2) /* Sleep Mode */
+#define RCSR_WDR (1 << 1) /* Watchdog Reset */
+#define RCSR_HWR (1 << 0) /* Hardware Reset */
+
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
+#define CKEN_IM (20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (12) /* MMC Unit Clock Enable */
+#define CKEN_USB (11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S (8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa2xx_spi.h
rename to arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 0000000..39eb683
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */
+
+#define OSCC_PEN (1 << 11) /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
+#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
+#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
+#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
+#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
+#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
+#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
+#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
+#define PCMD(x) __REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */
+#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */
+#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */
+#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */
+#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */
+#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH (1 << 31)
+#define ASCR_D1S (1 << 2)
+#define ASCR_D2S (1 << 1)
+#define ASCR_D3S (1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR (1 << 3)
+#define ARSR_LPMR (1 << 2)
+#define ARSR_WDT (1 << 1)
+#define ARSR_HWR (1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC (1 << 31) /* RTC */
+#define ADXER_WOST (1 << 30) /* OS Timer */
+#define ADXER_WTSI (1 << 29) /* Touchscreen */
+#define ADXER_WUSBH (1 << 28) /* USB host */
+#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */
+#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/
+#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */
+#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */
+#define ADXER_WKP (1 << 21) /* Keypad */
+#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */
+#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */
+#define ADXER_WOTG (1 << 16) /* USBOTG input */
+#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */
+#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */
+#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */
+#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */
+#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */
+#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */
+#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */
+#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */
+#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */
+#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */
+#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */
+#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */
+#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */
+#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2 (1 << 8)
+#define ADXR_R5 (1 << 5)
+#define ADXR_R4 (1 << 4)
+#define ADXR_R3 (1 << 3)
+#define ADXR_R2 (1 << 2)
+#define ADXR_R1 (1 << 1)
+#define ADXR_R0 (1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */
+#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */
+#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */
+#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1 0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
+#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD 1 /* < LCD Clock Enable */
+#define CKEN_USBH 2 /* < USB host clock enable */
+#define CKEN_CAMERA 3 /* < Camera interface clock enable */
+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT 11 /* < Boot rom clock enable */
+#define CKEN_MMC1 12 /* < MMC1 Clock enable */
+#define CKEN_MMC2 13 /* < MMC2 clock enable */
+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
+#define CKEN_TPM 19 /* < TPM clock enable */
+#define CKEN_UDC 20 /* < UDC clock enable */
+#define CKEN_BTUART 21 /* < BTUART clock enable */
+#define CKEN_FFUART 22 /* < FFUART clock enable */
+#define CKEN_STUART 23 /* < STUART clock enable */
+#define CKEN_AC97 24 /* < AC97 clock enable */
+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1 26 /* < SSP1 clock enable */
+#define CKEN_SSP2 27 /* < SSP2 clock enable */
+#define CKEN_SSP3 28 /* < SSP3 clock enable */
+#define CKEN_SSP4 29 /* < SSP4 clock enable */
+#define CKEN_MSL0 30 /* < MSL0 clock enable */
+#define CKEN_PWM0 32 /* < PWM[0] clock enable */
+#define CKEN_PWM1 33 /* < PWM[1] clock enable */
+#define CKEN_I2C 36 /* < I2C clock enable */
+#define CKEN_INTC 38 /* < Interrupt controller clock enable */
+#define CKEN_GPIO 39 /* < GPIO clock enable */
+#define CKEN_1WIRE 40 /* < 1-wire clock enable */
+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
+#define CKEN_MINI_IM 48 /* < Mini-IM */
+#define CKEN_MINI_LCD 49 /* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
+#define CKEN_MVED 43 /* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa3xx_nand.h
rename to arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 0000000..6544754
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ * Support for the xscale frame buffer.
+ *
+ * Author: Jean-Frederic Clere
+ * Created: Sep 22, 2003
+ * Copyright: jfclere@sinix.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ * STN - for passive matrix
+ * DSTN - for dual scan passive matrix
+ * TFT - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit 18 : for output enable polarity
+ * bit 19 : for pixel clock edge
+ */
+#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN 0
+#define LCD_TYPE_MONO_STN 1
+#define LCD_TYPE_MONO_DSTN 2
+#define LCD_TYPE_COLOR_STN 3
+#define LCD_TYPE_COLOR_DSTN 4
+#define LCD_TYPE_COLOR_TFT 5
+#define LCD_TYPE_SMART_PANEL 6
+#define LCD_TYPE_MAX 7
+
+#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH (0 << 17)
+#define LCD_BIAS_ACTIVE_LOW (1 << 17)
+#define LCD_PCLK_EDGE_RISE (0 << 18)
+#define LCD_PCLK_EDGE_FALL (1 << 18)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+ u_long pixclock;
+
+ u_short xres;
+ u_short yres;
+
+ u_char bpp;
+ u_int cmap_greyscale:1,
+ depth:8,
+ unused:23;
+
+ /* Parallel Mode Timing */
+ u_char hsync_len;
+ u_char left_margin;
+ u_char right_margin;
+
+ u_char vsync_len;
+ u_char upper_margin;
+ u_char lower_margin;
+ u_char sync;
+
+ /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+ * Note:
+ * 1. all parameters in nanosecond (ns)
+ * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+ * in pxa27x and pxa3xx, initialize them to the same value or
+ * the larger one will be used
+ * 3. same to {rd,wr}_pulse_width
+ */
+ unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+ unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+ unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
+ unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
+ unsigned cmd_inh_time; /* Command Inhibit time between two writes */
+ unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+ struct pxafb_mode_info *modes;
+ unsigned int num_modes;
+
+ unsigned int lcd_conn;
+
+ u_int fixed_modes:1,
+ cmap_inverse:1,
+ cmap_static:1,
+ unused:29;
+
+ /* The following should be defined in LCCR0
+ * LCCR0_Act or LCCR0_Pas Active or Passive
+ * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
+ * LCCR0_Mono or LCCR0_Color Mono/Color
+ * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+ * LCCR0_DMADel(Tcpu) (optional) DMA request delay
+ *
+ * The following should not be defined in LCCR0:
+ * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+ * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+ */
+ u_int lccr0;
+ /* The following should be defined in LCCR3
+ * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
+ * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+ * LCCR3_Acb(X) AB Bias pin frequency
+ * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
+ *
+ * The following should not be defined in LCCR3
+ * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+ */
+ u_int lccr3;
+ /* The following should be defined in LCCR4
+ * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+ *
+ * All other bits in LCCR4 should be left alone.
+ */
+ u_int lccr4;
+ void (*pxafb_backlight_power)(int);
+ void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+ void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 0000000..c689c4e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0 (0x000) /* LCD Controller Control Register 0 */
+#define LCCR1 (0x004) /* LCD Controller Control Register 1 */
+#define LCCR2 (0x008) /* LCD Controller Control Register 2 */
+#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
+#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
+#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
+#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
+#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR (0x038) /* LCD Controller Status Register */
+#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
+#define TMEDCR (0x044) /* TMED Control Register */
+
+#define CMDCR (0x100) /* Command Control Register */
+#define PRSR (0x104) /* Panel Read Status Register */
+
+#define LCCR3_1BPP (0 << 24)
+#define LCCR3_2BPP (1 << 24)
+#define LCCR3_4BPP (2 << 24)
+#define LCCR3_8BPP (3 << 24)
+#define LCCR3_16BPP (4 << 24)
+#define LCCR3_18BPP (5 << 24)
+#define LCCR3_18BPP_P (6 << 24)
+#define LCCR3_19BPP (7 << 24)
+#define LCCR3_19BPP_P (1 << 29)
+#define LCCR3_24BPP ((1 << 29) | (1 << 24))
+#define LCCR3_25BPP ((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0 (0 << 30)
+#define LCCR3_PDFOR_1 (1 << 30)
+#define LCCR3_PDFOR_2 (2 << 30)
+#define LCCR3_PDFOR_3 (3 << 30)
+
+#define LCCR4_PAL_FOR_0 (0 << 15)
+#define LCCR4_PAL_FOR_1 (1 << 15)
+#define LCCR4_PAL_FOR_2 (2 << 15)
+#define LCCR4_PAL_FOR_MASK (3 << 15)
+
+#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
+#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
+#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
+#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
+#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
+#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+
+#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
+#define LCCR0_SFM (1 << 4) /* Start of frame mask */
+#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
+#define LCCR0_EFM (1 << 6) /* End of Frame mask */
+#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */
+#define LCCR0_DIS (1 << 10) /* LCD Disable */
+#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
+#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
+#define LCCR0_PDD_S 12
+#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
+#define LCCR0_LCDT (1 << 22) /* LCD panel type */
+#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
+#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
+#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
+#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
+
+#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S 16
+#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
+#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
+#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+
+#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
+
+#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB Fld (8, 8) /* AC Bias */
+#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */
+
+#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */
+#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */
+
+#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */
+#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */
+
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
+#define LCSR_RD_ST (1 << 11) /* read status */
+#define LCSR_CMD_INT (1 << 12) /* command interrupt */
+
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
+#define PRSR_A0 (1 << 8) /* Read Data Source */
+#define PRSR_ST_OK (1 << 9) /* Status OK */
+#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */
+
+#define SMART_CMD_A0 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
+#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
+#define SMART_CMD_NOOP (0x4 << 9)
+#define SMART_CMD_INTERRUPT (0x5 << 9)
+
+#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
similarity index 100%
rename from include/asm-arm/arch-pxa/regs-ssp.h
rename to arch/arm/mach-pxa/include/mach/regs-ssp.h
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
similarity index 100%
rename from include/asm-arm/arch-pxa/sharpsl.h
rename to arch/arm/mach-pxa/include/mach/sharpsl.h
diff --git a/include/asm-arm/arch-pxa/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
similarity index 100%
rename from include/asm-arm/arch-pxa/spitz.h
rename to arch/arm/mach-pxa/include/mach/spitz.h
diff --git a/include/asm-arm/arch-pxa/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
similarity index 100%
rename from include/asm-arm/arch-pxa/ssp.h
rename to arch/arm/mach-pxa/include/mach/ssp.h
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 0000000..0f381e6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 0000000..b05fc66
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/include/asm-arm/arch-pxa/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
similarity index 100%
rename from include/asm-arm/arch-pxa/tosa.h
rename to arch/arm/mach-pxa/include/mach/tosa.h
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
similarity index 100%
rename from include/asm-arm/arch-pxa/tosa_bt.h
rename to arch/arm/mach-pxa/include/mach/tosa_bt.h
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
similarity index 100%
rename from include/asm-arm/arch-pxa/trizeps4.h
rename to arch/arm/mach-pxa/include/mach/trizeps4.h
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 0000000..2f82332
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 0000000..21e3e89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x) ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+ if (!(UART[UART_IER] & IER_UUE))
+ return;
+ while (!(UART[UART_LSR] & LSR_TDRQ))
+ barrier();
+ UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+ if (machine_is_littleton())
+ UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 0000000..e90c5ee
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END (0xe8000000)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
similarity index 100%
rename from include/asm-arm/arch-pxa/zylonite.h
rename to arch/arm/mach-pxa/include/mach/zylonite.h
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 26a9d8b..5e95c53 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
#include <linux/interrupt.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index c410e53..18b20d4 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 7eafbb4..1a25802 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 32ca5ac..95e06b8 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index c2fe1db..3bc2900 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/types.h>
#include <asm/leds.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 101bd7e..58f3402 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -26,21 +26,21 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 34c69b1..b703894 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -38,15 +38,15 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 66a3f33..4ba8d31 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,12 +25,12 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -41,15 +41,15 @@
#include <asm/hardware/sa1111.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e919f37..143f28a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -26,18 +26,18 @@
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 425ba96..d44af76 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -32,7 +32,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -41,17 +41,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index fd4545e..925575f 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
#include <linux/init.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index c151831..eb197a6 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
#include <linux/io.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
/* mfp_spin_lock is used to ensure that MFP register configuration
* (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 408657a..fe924a2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,15 +30,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/palmtx.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/udc.h>
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 377f3be..730b9f6 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,12 +29,12 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
#include "generic.h"
/*
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 90056d5..420c9b3 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,16 +28,16 @@
#include <media/soc_camera.h>
#include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 9445bf1..1b539e6 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
#include <linux/errno.h>
#include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/memory.h>
#include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
#include <asm/mach/time.h>
struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index fef958f..055ec63 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
#include <linux/pm.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -31,16 +31,16 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9..316cd98 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
#include <linux/pwm.h>
#include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
/* PWM registers and bits definitions */
#define PWMCR (0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c8379e5..3c2d22d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,13 @@
#include <linux/suspend.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 46720ed..6bec434 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,16 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415..00b4de6 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,9 @@
#include <linux/kernel.h>
#include <linux/device.h>
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
static unsigned long pxa2xx_mfp_fir[] = {
GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index b8482da..494fc1f 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,9 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 95d46d9..016eb18 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,10 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f5e6c7..37b0721 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,12 @@
#include <linux/io.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 028ee1d..13e6bfd 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,8 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9d39dea..fabead7 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,8 +10,8 @@
#include <asm/io.h>
#include <asm/proc-fns.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
static void do_hw_reset(void);
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ee70dee..e7ea91c 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -21,9 +21,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 7b7d0bd..e804ae0 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
#include "sharpsl.h"
struct battery_thresh spitz_battery_levels_acin[] = {
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 2a58f1e..a62c837 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index a8774d4..26b9fa5 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -35,18 +35,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8fb5651..8a40505 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index bca34e5..9bd93c5 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -31,10 +31,10 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 207fb60..f3821cf 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
.text
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9dcb349e..589d32b 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -21,9 +21,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179..67e1850 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
#include <asm/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
/*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 7d85054..fb0294b 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
#include <linux/delay.h>
#include <linux/rfkill.h>
-#include <asm/arch/tosa_bt.h>
+#include <mach/tosa_bt.h>
static void tosa_bt_on(struct tosa_bt_data *data)
{
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index fea17ce..38bc59c 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,16 +34,16 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/tosa_bt.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
#include <asm/mach/arch.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 6367ac2..3ed757e 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -40,15 +40,15 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index f11ced1..0cb65b5 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -23,14 +23,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b28d46e..095f5c6 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -20,9 +20,9 @@
#include <linux/i2c/pca953x.h>
#include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b7fba7..9879d7d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index b63fa88..4f9c84a 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
#include <linux/clockchips.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
new file mode 100644
index 0000000..8d699fd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_EB_H
+#define __ASM_ARCH_BOARD_EB_H
+
+#include <mach/platform.h>
+
+/*
+ * RealView EB + ARM11MPCore peripheral addresses
+ */
+#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE 0x40000000
+#define REALVIEW_EB_FLASH_SIZE SZ_64M
+#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
+#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE 0x10100700
+#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE 0x1F000700
+#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
+#endif
+
+#define IRQ_EB_GIC_START 32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
+#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
+#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
+#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
+#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
+#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
+#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
+#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
+#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
+#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
+#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
+#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
+#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
+#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
+#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
+#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
+#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
+#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2 -1
+#define IRQ_EB11MP_UART3 -1
+#define IRQ_EB11MP_CLCD -1
+#define IRQ_EB11MP_DMA -1
+#define IRQ_EB11MP_WDOG -1
+#define IRQ_EB11MP_GPIO0 -1
+#define IRQ_EB11MP_GPIO1 -1
+#define IRQ_EB11MP_GPIO2 -1
+#define IRQ_EB11MP_SCI -1
+#define IRQ_EB11MP_SSP -1
+
+#define NR_GIC_EB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+ && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_EB11MP
+#endif
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_EB_PROC_MASK 0xFF000000
+#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000
+#define REALVIEW_EB_PROC_ARM9 0x02000000
+#define REALVIEW_EB_PROC_ARM11 0x04000000
+#define REALVIEW_EB_PROC_ARM11MP 0x06000000
+
+#define check_eb_proc(proc_type) \
+ ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
+ == proc_type)
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
+#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
+#else
+#define core_tile_eb11mp() 0
+#endif
+
+#endif /* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
new file mode 100644
index 0000000..858eea7
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE 0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START 32
+#define IRQ_PB1176_GIC_START 64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
+#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
+#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
+#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
+#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
+#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
+#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
+#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
+#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
+#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
+#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
+#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
+
+#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
+#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0 -1
+#define IRQ_PB1176_SSP -1
+#define IRQ_PB1176_SCTL -1
+
+#define NR_GIC_PB1176 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB1176
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
new file mode 100644
index 0000000..ecd80e5
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE 0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE 0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START 32
+#define IRQ_PB11MP_GIC_START 64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
+#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
+#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
+#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
+#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
+#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
+#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
+#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
+#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
+#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
+#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC -1
+#define IRQ_PB11MP_SCTL -1
+
+#define NR_GIC_PB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB11MP
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 0000000..7196bca
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x10000000
+ movne \rx, #0xf0000000 @ virtual base
+ orr \rx, \rx, #0x00009000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 0000000..f1a5a1a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-realview/include/mach/dma.h
+ *
+ * Copyright (C) 2003 ARM Limited.
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 0000000..340a5c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =gic_cpu_base_addr
+ ldr \base, [\base]
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt. We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved.. */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 0000000..79a93b3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-realview/include/mach/hardware.h
+ *
+ * This file contains the hardware definitions of the RealView boards.
+ *
+ * Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n) __io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 0000000..aa06942
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-realview/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 0000000..02a9185
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
+
+#define IRQ_GIC_START 32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 0000000..0e67348
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-realview/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 0000000..4034b54
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI 0x30000000
+#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */
+#define REALVIEW_BOOT_ROM_SIZE SZ_64M
+
+#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE SZ_2M
+
+/*
+ * SDRAM
+ */
+#define REALVIEW_SDRAM_BASE 0x00000000
+
+/*
+ * Logic expansion modules
+ *
+ */
+
+
+/* ------------------------------------------------------------------------
+ * RealView Registers
+ * ------------------------------------------------------------------------
+ *
+ */
+#define REALVIEW_SYS_ID_OFFSET 0x00
+#define REALVIEW_SYS_SW_OFFSET 0x04
+#define REALVIEW_SYS_LED_OFFSET 0x08
+#define REALVIEW_SYS_OSC0_OFFSET 0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET 0x10
+#define REALVIEW_SYS_OSC2_OFFSET 0x14
+#define REALVIEW_SYS_OSC3_OFFSET 0x18
+#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET 0x20
+#define REALVIEW_SYS_100HZ_OFFSET 0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET 0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET 0x40
+#define REALVIEW_SYS_PCICTL_OFFSET 0x44
+#define REALVIEW_SYS_MCI_OFFSET 0x48
+#define REALVIEW_SYS_FLASH_OFFSET 0x4C
+#define REALVIEW_SYS_CLCD_OFFSET 0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET 0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET 0x58
+#define REALVIEW_SYS_24MHz_OFFSET 0x5C
+#define REALVIEW_SYS_MISC_OFFSET 0x60
+#define REALVIEW_SYS_IOSEL_OFFSET 0x70
+#define REALVIEW_SYS_PROCID_OFFSET 0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0
+
+#define REALVIEW_SYS_BASE 0x10000000
+#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04
+#define REALVIEW_SYS_CTRL_RESET_POR 0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC 0x06
+
+#define REALVIEW_SYS_CTRL_LED (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ * RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/*
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4 = build value
+ * 3:0 = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
+ * SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ * - used to acknowledge and control MMCI and UART interrupts
+ */
+#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
+#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */
+ /* write 1 to acknowledge and clear */
+#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
+#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */
+#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */
+#define REALVIEW_AACI_BASE 0x10004000 /* Audio */
+#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */
+#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */
+#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */
+#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */
+#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */
+#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */
+#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE 0x42000000
+#define REALVIEW_PCI_MEM_BASE0 0x44000000
+#define REALVIEW_PCI_MEM_BASE1 0x50000000
+#define REALVIEW_PCI_MEM_BASE2 0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE 0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE 0x2C000000
+#define REALVIEW_DOC_SIZE (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE 512
+#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES 32
+#define START_PAGE 0x80
+
+/*
+ * LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0 (1 << 0)
+#define REALVIEW_SYS_LED1 (1 << 1)
+#define REALVIEW_SYS_LED2 (1 << 2)
+#define REALVIEW_SYS_LED3 (1 << 3)
+#define REALVIEW_SYS_LED4 (1 << 4)
+#define REALVIEW_SYS_LED5 (1 << 5)
+#define REALVIEW_SYS_LED6 (1 << 6)
+#define REALVIEW_SYS_LED7 (1 << 7)
+
+#define ALL_LEDS 0xFF
+
+#define LED_BANK REALVIEW_SYS_LED
+
+/*
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */
+#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
+#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
+
+/*
+ * Application Flash
+ *
+ */
+#define FLASH_BASE REALVIEW_FLASH_BASE
+#define FLASH_SIZE REALVIEW_FLASH_SIZE
+#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE SZ_128K
+
+/*
+ * Boot Flash
+ *
+ */
+#define EPROM_BASE REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
+
+/*
+ * Clean base - dummy
+ *
+ */
+#define CLEAN_BASE EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK 0
+#define REALVIEW_TIMCLK 1
+
+#define REALVIEW_TIMER1_EnSel 15
+#define REALVIEW_TIMER2_EnSel 17
+#define REALVIEW_TIMER3_EnSel 19
+#define REALVIEW_TIMER4_EnSel 21
+
+
+#define MAX_TIMER 2
+#define MAX_PERIOD 699050
+#define TICKS_PER_uSEC 1
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE 0x10000000
+#define REALVIEW_CSR_SIZE 0x10000000
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/scu.h b/arch/arm/mach-realview/include/mach/scu.h
similarity index 100%
rename from include/asm-arm/arch-realview/scu.h
rename to arch/arm/mach-realview/include/mach/scu.h
diff --git a/include/asm-arm/arch-realview/smp.h b/arch/arm/mach-realview/include/mach/smp.h
similarity index 100%
rename from include/asm-arm/arch-realview/smp.h
rename to arch/arm/mach-realview/include/mach/smp.h
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 0000000..4d3c8f3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-realview/include/mach/system.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+ unsigned int val;
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ val = __raw_readl(hdr_ctrl);
+ val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+ __raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 0000000..4eeb069
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-realview/include/mach/timex.h
+ *
+ * RealView architecture timex specifications
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 0000000..79f50f2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+ if (machine_is_realview_eb())
+ return REALVIEW_EB_UART0_BASE;
+ else if (machine_is_realview_pb11mp())
+ return REALVIEW_PB11MP_UART0_BASE;
+ else if (machine_is_realview_pb1176())
+ return REALVIEW_PB1176_UART0_BASE;
+ else
+ return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ unsigned long base = get_uart_base();
+
+ while (AMBA_UART_FR(base) & (1 << 5))
+ barrier();
+
+ AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+ unsigned long base = get_uart_base();
+
+ while (AMBA_UART_FR(base) & (1 << 3))
+ barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 0000000..48cbcc87
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 7631f3e..82fa1f2 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
#include <asm/hardware/arm_twd.h>
#include <asm/hardware/gic.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index c1e579c..1907d22 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
#include <linux/smp.h>
#include <asm/cacheflush.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
extern void realview_secondary_startup(void);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 66c1f3e..19a9968 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -38,8 +38,8 @@
#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
#include "core.h"
#include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a00588a..0986cbd 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -39,8 +39,8 @@
#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
#include "core.h"
#include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 0188987..f4e7135 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -39,8 +39,8 @@
#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
#include "core.h"
#include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index fb1d42b..4b19fe4 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
#include <asm/fiq.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <asm/mach/dma.h>
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
new file mode 100644
index 0000000..395d762
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -0,0 +1,140 @@
+/*
+ * arch/arm/mach-rpc/include/mach/acornfb.h
+ *
+ * Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+ u_long limit;
+
+ if (!var->pixclock)
+ return 0;
+
+ /*
+ * Limits below are taken from RISC OS bandwidthlimit file
+ */
+ if (current_par.using_vram) {
+ if (current_par.vram_half_sam == 2048)
+ limit = 6578;
+ else
+ limit = 13157;
+ } else {
+ limit = 26315;
+ }
+
+ return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+ u_int r, best_r = 2, best_v = 2;
+ int best_d = 0x7fffffff;
+
+ for (r = 2; r <= 32; r++) {
+ u_int rr, v, p;
+ int d;
+
+ rr = 41667 * r;
+
+ v = (rr + pixclk / 2) / pixclk;
+
+ if (v > 32 || v < 2)
+ continue;
+
+ p = (rr + v / 2) / v;
+
+ d = pixclk - p;
+
+ if (d < 0)
+ d = -d;
+
+ if (d < best_d) {
+ best_d = d;
+ best_v = v - 1;
+ best_r = r - 1;
+ }
+
+ if (d == 0)
+ break;
+ }
+
+ return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+ struct fb_var_screeninfo *var)
+{
+ u_int div;
+
+ /* Select pixel-clock divisor to keep PLL in range */
+ div = var->pixclock / 9090; /*9921*/
+
+ /* Limit divisor */
+ if (div == 0)
+ div = 1;
+ if (div > 8)
+ div = 8;
+
+ /* Encode divisor to VIDC20 setting */
+ switch (div) {
+ case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
+ case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+ case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+ case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+ case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+ case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+ case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+ case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+ }
+
+ /*
+ * With VRAM, the FIFO can be set to the highest possible setting
+ * because there are no latency considerations for other memory
+ * accesses. However, in 64 bit bus mode the FIFO preload value
+ * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+ * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+ * FIFO preload value).
+ */
+ if (current_par.using_vram) {
+ if (current_par.vram_half_sam == 2048)
+ vidc->control |= VIDC20_CTRL_FIFO_24;
+ else
+ vidc->control |= VIDC20_CTRL_FIFO_28;
+ } else {
+ unsigned long bandwidth = acornfb_bandwidth(var);
+
+ /* Encode bandwidth as VIDC20 setting */
+ if (bandwidth > 33334) /* < 30.0MB/s */
+ vidc->control |= VIDC20_CTRL_FIFO_16;
+ else if (bandwidth > 26666) /* < 37.5MB/s */
+ vidc->control |= VIDC20_CTRL_FIFO_20;
+ else if (bandwidth > 22222) /* < 45.0MB/s */
+ vidc->control |= VIDC20_CTRL_FIFO_24;
+ else /* > 45.0MB/s */
+ vidc->control |= VIDC20_CTRL_FIFO_28;
+ }
+
+ /* Find the PLL values */
+ vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
new file mode 100644
index 0000000..b2a939ff
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x03000000
+ movne \rx, #0xe0000000
+ orr \rx, \rx, #0x00010000
+ orr \rx, \rx, #0x00000fe0
+ .endm
+
+#define UART_SHIFT 2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
new file mode 100644
index 0000000..360b56f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-rpc/include/mach/dma.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS 0xd0000000
+#define MAX_DMA_CHANNELS 8
+
+#define DMA_0 0
+#define DMA_1 1
+#define DMA_2 2
+#define DMA_3 3
+#define DMA_S0 4
+#define DMA_S1 5
+#define DMA_VIRTUAL_FLOPPY 6
+#define DMA_VIRTUAL_SOUND 7
+
+#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e7e541
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 0000000..dde6b3c
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_SIZE 0x10000000
+#define RAM_START 0x10000000
+
+#define EASI_SIZE 0x08000000 /* EASI I/O */
+#define EASI_START 0x08000000
+#define EASI_BASE 0xe5000000
+
+#define IO_START 0x03000000 /* I/O */
+#define IO_SIZE 0x01000000
+#define IO_BASE IOMEM(0xe0000000)
+
+#define SCREEN_START 0x02000000 /* VRAM */
+#define SCREEN_END 0xdfc00000
+#define SCREEN_BASE 0xdf800000
+
+#define UNCACHEABLE_ADDR 0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE IOMEM(0xe0400000)
+#define EXPMASK_BASE 0xe0360000
+#define IOMD_BASE IOMEM(0xe0200000)
+#define IOC_BASE IOMEM(0xe0200000)
+#define PCIO_BASE IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE IOMEM(0xe002a000)
+
+#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE 0x81400000
+#define IO_EC_IOC4_BASE 0x8009c000
+#define IO_EC_IOC_BASE 0x80090000
+#define IO_EC_MEMC8_BASE 0x8000ac00
+#define IO_EC_MEMC_BASE 0x80000000
+
+#define NETSLOT_BASE 0x0302b000
+#define NETSLOT_SIZE 0x00001000
+
+#define PODSLOT_IOC0_BASE 0x03240000
+#define PODSLOT_IOC4_BASE 0x03270000
+#define PODSLOT_IOC_SIZE (1 << 14)
+#define PODSLOT_MEMC_BASE 0x03000000
+#define PODSLOT_MEMC_SIZE (1 << 14)
+#define PODSLOT_EASI_BASE 0x08000000
+#define PODSLOT_EASI_SIZE (1 << 24)
+
+#define EXPMASK_STATUS (EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 0000000..9f0553b
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,258 @@
+/*
+ * arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 06-Dec-1997 RMK Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data. We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o) \
+ ({ \
+ unsigned int __v, __r = (b); \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2]" \
+ : "=r" (__v) \
+ : "r" (__r), "Ir" (o)); \
+ __v; \
+ })
+
+#define __arch_base_getl(b,o) \
+ ({ \
+ unsigned int __v, __r = (b); \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2]" \
+ : "=r" (__v) \
+ : "r" (__r), "Ir" (o)); \
+ __v; \
+ })
+
+#define __arch_base_putb(v,b,o) \
+ ({ \
+ unsigned int __r = (b); \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o) \
+ ({ \
+ unsigned int __r = (b); \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
+ * and are translated to the start of IO. Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x) (!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "strb %1, [%0, %2, lsl #2] @ outb"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outw"
+ : "=&r" (temp)
+ : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outl"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
+static inline unsigned sz __in##fnsuffix (unsigned int port) \
+{ \
+ unsigned long temp, value; \
+ __asm__ __volatile__( \
+ "tst %2, #0x80000000\n\t" \
+ "mov %0, %4\n\t" \
+ "addeq %0, %0, %3\n\t" \
+ "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
+ : "=&r" (temp), "=r" (value) \
+ : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
+ : "cc"); \
+ return (unsigned sz)value; \
+}
+
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
+{
+ void __iomem *ret;
+ if (__PORT_PCIO(port))
+ ret = PCIO_BASE;
+ else
+ ret = IO_BASE;
+ return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr) \
+ DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port) \
+({ \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inbc(port) \
+({ \
+ unsigned char result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __outwc(value,port) \
+({ \
+ unsigned long __v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inwc(port) \
+({ \
+ unsigned short result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result & 0xffff; \
+})
+
+#define __outlc(value,port) \
+({ \
+ unsigned long __v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inlc(port) \
+({ \
+ unsigned long result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __ioaddrc(port) __ioaddr(port)
+
+#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
+#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
+#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
+#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port) ((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x) (x)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 0000000..4ce6ca9
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER 0
+#define IRQ_BATLOW 1
+#define IRQ_FLOPPYINDEX 2
+#define IRQ_VSYNCPULSE 3
+#define IRQ_POWERON 4
+#define IRQ_TIMER0 5
+#define IRQ_TIMER1 6
+#define IRQ_IMMEDIATE 7
+#define IRQ_EXPCARDFIQ 8
+#define IRQ_HARDDISK 9
+#define IRQ_SERIALPORT 10
+#define IRQ_FLOPPYDISK 12
+#define IRQ_EXPANSIONCARD 13
+#define IRQ_KEYBOARDTX 14
+#define IRQ_KEYBOARDRX 15
+
+#define IRQ_DMA0 16
+#define IRQ_DMA1 17
+#define IRQ_DMA2 18
+#define IRQ_DMA3 19
+#define IRQ_DMAS0 20
+#define IRQ_DMAS1 21
+
+#define FIQ_FLOPPYDATA 0
+#define FIQ_ECONET 2
+#define FIQ_SERIALPORT 4
+#define FIQ_EXPANSIONCARD 6
+#define FIQ_FORCE 7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START 64
+
+#define IRQ_TIMER IRQ_TIMER0
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 0000000..05425d5
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-rpc/include/mach/memory.h
+ *
+ * Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 20-Oct-1996 RMK Created
+ * 31-Dec-1997 RMK Fixed definitions to reduce warnings
+ * 11-Jan-1998 RMK Uninlined to reduce hits on cache
+ * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
+ * 21-Mar-1999 RMK Renamed to memory.h
+ * RMK Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS 0x00000000
+#define FLUSH_BASE 0xdf000000
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
new file mode 100644
index 0000000..54d6e3f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-rpc/include/mach/system.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ iomd_writeb(0, IOMD_ROMCR0);
+
+ /*
+ * Jump into the ROM
+ */
+ cpu_reset(0);
+}
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
new file mode 100644
index 0000000..dd75e73
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-rpc/include/mach/timex.h
+ *
+ * Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE 2000000
+
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 0000000..baa9c86
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,198 @@
+/*
+ * arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+ unsigned long page_size;
+ unsigned long nr_pages;
+ unsigned long ramdisk_size;
+ unsigned long mountrootrdonly;
+ unsigned long rootdev;
+ unsigned long video_num_cols;
+ unsigned long video_num_rows;
+ unsigned long video_x;
+ unsigned long video_y;
+ unsigned long memc_control_reg;
+ unsigned char sounddefault;
+ unsigned char adfsdrives;
+ unsigned char bytes_per_char_h;
+ unsigned char bytes_per_char_v;
+ unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+ 0x00000000,
+ 0x000000cc,
+ 0x0000cc00, /* Green */
+ 0x0000cccc, /* Yellow */
+ 0x00cc0000, /* Blue */
+ 0x00cc00cc, /* Magenta */
+ 0x00cccc00, /* Cyan */
+ 0x00cccccc, /* White */
+ 0x00000000,
+ 0x000000ff,
+ 0x0000ff00,
+ 0x0000ffff,
+ 0x00ff0000,
+ 0x00ff00ff,
+ 0x00ffff00,
+ 0x00ffffff
+};
+
+#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG
+static unsigned long video_num_cols;
+static unsigned long video_num_rows;
+static unsigned long video_x;
+static unsigned long video_y;
+static unsigned char bytes_per_char_v;
+static int white;
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+ extern void ll_write_char(char *, char c, char white);
+ int x,y;
+ char *ptr;
+
+ x = video_x;
+ y = video_y;
+
+ if (c == '\n') {
+ if (++y >= video_num_rows)
+ y--;
+ } else if (c == '\r') {
+ x = 0;
+ } else {
+ ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+ ll_write_char(ptr, c, white);
+ if (++x >= video_num_cols) {
+ x = 0;
+ if ( ++y >= video_num_rows ) {
+ y--;
+ }
+ }
+ }
+
+ video_x = x;
+ video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+ int i;
+ struct tag *t = (struct tag *)params;
+ unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+ if (t->hdr.tag == ATAG_CORE)
+ {
+ for (; t->hdr.size; t = tag_next(t))
+ {
+ if (t->hdr.tag == ATAG_VIDEOTEXT)
+ {
+ video_num_rows = t->u.videotext.video_lines;
+ video_num_cols = t->u.videotext.video_cols;
+ bytes_per_char_h = t->u.videotext.video_points;
+ bytes_per_char_v = t->u.videotext.video_points;
+ video_x = t->u.videotext.x;
+ video_y = t->u.videotext.y;
+ }
+
+ if (t->hdr.tag == ATAG_MEM)
+ {
+ page_size = PAGE_SIZE;
+ nr_pages += (t->u.mem.size / PAGE_SIZE);
+ }
+ }
+ }
+ else
+ {
+ nr_pages = params->nr_pages;
+ page_size = params->page_size;
+ video_num_rows = params->video_num_rows;
+ video_num_cols = params->video_num_cols;
+ video_x = params->video_x;
+ video_y = params->video_y;
+ bytes_per_char_h = params->bytes_per_char_h;
+ bytes_per_char_v = params->bytes_per_char_v;
+ }
+
+ video_size_row = video_num_cols * bytes_per_char_h;
+
+ if (bytes_per_char_h == 4)
+ for (i = 0; i < 256; i++)
+ con_charconvtable[i] =
+ (i & 128 ? 1 << 0 : 0) |
+ (i & 64 ? 1 << 4 : 0) |
+ (i & 32 ? 1 << 8 : 0) |
+ (i & 16 ? 1 << 12 : 0) |
+ (i & 8 ? 1 << 16 : 0) |
+ (i & 4 ? 1 << 20 : 0) |
+ (i & 2 ? 1 << 24 : 0) |
+ (i & 1 ? 1 << 28 : 0);
+ else
+ for (i = 0; i < 16; i++)
+ con_charconvtable[i] =
+ (i & 8 ? 1 << 0 : 0) |
+ (i & 4 ? 1 << 8 : 0) |
+ (i & 2 ? 1 << 16 : 0) |
+ (i & 1 ? 1 << 24 : 0);
+
+
+ palette_setpixel(0);
+ if (bytes_per_char_h == 1) {
+ palette_write (0);
+ palette_write (0x00ffffff);
+ for (i = 2; i < 256; i++)
+ palette_write (0);
+ white = 1;
+ } else {
+ for (i = 0; i < 256; i++)
+ palette_write (i < 16 ? palette_4[i] : 0);
+ white = 7;
+ }
+
+ if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
new file mode 100644
index 0000000..9a96fd6
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-rpc/include/mach/vmalloc.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 54a6c75..ce8470fea 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
#include <asm/elf.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/domain.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 140fd25..148d0dd 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
int s3c2400_gpio_getirq(unsigned int pin)
{
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
new file mode 100644
index 0000000..1535540
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -0,0 +1,66 @@
+/* arch/arm/mach-s3c2400/include/mach/map.h
+ *
+ * Copyright 2003,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright 2003, Lucas Correia Villa Real
+ *
+ * S3C2400 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2400_PA_MEMCTRL (0x14000000)
+#define S3C2400_PA_USBHOST (0x14200000)
+#define S3C2400_PA_IRQ (0x14400000)
+#define S3C2400_PA_DMA (0x14600000)
+#define S3C2400_PA_CLKPWR (0x14800000)
+#define S3C2400_PA_LCD (0x14A00000)
+#define S3C2400_PA_UART (0x15000000)
+#define S3C2400_PA_TIMER (0x15100000)
+#define S3C2400_PA_USBDEV (0x15200140)
+#define S3C2400_PA_WATCHDOG (0x15300000)
+#define S3C2400_PA_IIC (0x15400000)
+#define S3C2400_PA_IIS (0x15508000)
+#define S3C2400_PA_GPIO (0x15600000)
+#define S3C2400_PA_RTC (0x15700040)
+#define S3C2400_PA_ADC (0x15800000)
+#define S3C2400_PA_SPI (0x15900000)
+
+#define S3C2400_PA_MMC (0x15A00000)
+#define S3C2400_SZ_MMC SZ_1M
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2400_CS0 (0x00000000)
+#define S3C2400_CS1 (0x02000000)
+#define S3C2400_CS2 (0x04000000)
+#define S3C2400_CS3 (0x06000000)
+#define S3C2400_CS4 (0x08000000)
+#define S3C2400_CS5 (0x0A000000)
+#define S3C2400_CS6 (0x0C000000)
+#define S3C2400_CS7 (0x0E000000)
+
+#define S3C2400_SDRAM_PA (S3C2400_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2400_PA_LCD
+#define S3C24XX_PA_UART S3C2400_PA_UART
+#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2400_PA_IIC
+#define S3C24XX_PA_IIS S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC S3C2400_PA_RTC
+#define S3C24XX_PA_ADC S3C2400_PA_ADC
+#define S3C24XX_PA_SPI S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
new file mode 100644
index 0000000..8f4878e
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ * from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ * Copyright 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x0C000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe3..298ecec 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
/* IDE ports */
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 4e58bc0..c66021b 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
#include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 4e62397..1322851 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e85..8730797 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
#include <linux/serial_core.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/dma.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index d15621e..c6eefb1 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index affa4fa..5a6bc56 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
#define DRV_NAME "h1940-bt"
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
new file mode 100644
index 0000000..1b614d5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISCPLD_H
+#define __ASM_ARCH_ANUBISCPLD_H
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL (0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK (0x7)
+
+#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
new file mode 100644
index 0000000..a2a3281
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISIRQ_H
+#define __ASM_ARCH_ANUBISIRQ_H
+
+#define IRQ_IDE0 IRQ_EINT2
+#define IRQ_IDE1 IRQ_EINT3
+#define IRQ_ASIX IRQ_EINT1
+
+#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
new file mode 100644
index 0000000..c9deb3a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_ANUBISMAP_H
+#define __ASM_ARCH_ANUBISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
+#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
+#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23))
+
+#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
+
+#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
new file mode 100644
index 0000000..de0e8da
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/include/mach/audio.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+ struct module *owner;
+
+ int (*startup)(struct s3c24xx_iis_ops *me);
+ void (*shutdown)(struct s3c24xx_iis_ops *me);
+ int (*suspend)(struct s3c24xx_iis_ops *me);
+ int (*resume)(struct s3c24xx_iis_ops *me);
+
+ int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+ int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+ int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+};
+
+struct s3c24xx_platdata_iis {
+ const char *codec_clk;
+ struct s3c24xx_iis_ops *ops;
+ int (*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
new file mode 100644
index 0000000..20493b0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -0,0 +1,53 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF (0x00)
+#define BAST_CPLD_CTRL1_LRCADC (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC (0x02)
+#define BAST_CPLD_CTRL1_LRCARM (0x03)
+#define BAST_CPLD_CTRL1_LRMASK (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND (0x04)
+#define BAST_CPLD_CTLR2_IDERST (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT (0x01)
+#define BAST_CPLD_CTRL4_LCDRW (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD (0x04)
+#define BAST_CPLD_CTRL4_LCDE2 (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE (0<<0)
+#define BAST_CPLD_DMA0_SECIDE (1<<0)
+#define BAST_CPLD_DMA0_ISA15 (2<<0)
+#define BAST_CPLD_DMA0_ISA36 (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE (0<<2)
+#define BAST_CPLD_DMA1_SECIDE (1<<2)
+#define BAST_CPLD_DMA1_ISA15 (2<<2)
+#define BAST_CPLD_DMA1_ISA36 (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
new file mode 100644
index 0000000..501c202b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC IRQ_EINT18
+#define IRQ_IDE0 IRQ_EINT16
+#define IRQ_IDE1 IRQ_EINT17
+#define IRQ_PCSERIAL1 IRQ_EINT15
+#define IRQ_PCSERIAL2 IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX IRQ_EINT11
+#define IRQ_DM9000 IRQ_EINT10
+#define IRQ_ISA IRQ_EINT9
+#define IRQ_SMALERT IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
new file mode 100644
index 0000000..c2c5baf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
+#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
+#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
+#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
+#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1 (0x8800000)
+#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1 (0x8000000)
+#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1 (0x9800000)
+#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1 (0x9000000)
+#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2 (0xA800000)
+#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2 (0xA000000)
+#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2 (0xB800000)
+#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2 (0xB000000)
+#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO (0x00000000)
+#define BAST_PA_ASIXNET (0x01000000)
+#define BAST_PA_SUPERIO (0x01800000)
+#define BAST_PA_IDEPRI (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM (0x04000000)
+#define BAST_PA_DM9000 (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/* */
+
+#define BAST_ASIXNET_CS BAST_VAM_CS5
+#define BAST_IDE_CS BAST_VAM_CS5
+#define BAST_DM9000_CS BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
new file mode 100644
index 0000000..61684cb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT (0x00)
+#define BASTPMU_REG_VERSION (0x01)
+#define BASTPMU_REG_DDCCTRL (0x02)
+#define BASTPMU_REG_POWER (0x03)
+#define BASTPMU_REG_RESET (0x04)
+#define BASTPMU_REG_GWO (0x05)
+#define BASTPMU_REG_WOL (0x06)
+#define BASTPMU_REG_WOR (0x07)
+#define BASTPMU_REG_UID (0x09)
+
+#define BASTPMU_EEPROM (0xC0)
+
+#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0 0x53
+#define BASTPMU_IDENT_1 0x42
+#define BASTPMU_IDENT_2 0x50
+#define BASTPMU_IDENT_3 0x4d
+
+#define BASTPMU_RESET_GUARD (0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
new file mode 100644
index 0000000..682df23
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -0,0 +1,102 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2005 Simtec Electronics
+ *
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C24XX_PA_UART
+ ldrne \rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+ .macro fifo_full_s3c24xx rd, rx
+ @ check for arm920 vs arm926. currently assume all arm926
+ @ devices have an 64 byte FIFO identical to the s3c2440
+ mrc p15, 0, \rd, c0, c0
+ and \rd, \rd, #0xff0
+ teq \rd, #0x260
+ beq 1004f
+ mrc p15, 0, \rd, c1, c0
+ tst \rd, #1
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+ addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+ bic \rd, \rd, #0xff000
+ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ and \rd, \rd, #0x00ff0000
+ teq \rd, #0x00440000 @ is it 2440?
+1004:
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ moveq \rd, \rd, lsr #SHIFT_2440TXF
+ tst \rd, #S3C2410_UFSTAT_TXFULL
+ .endm
+
+ .macro fifo_full_s3c2410 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ tst \rd, #S3C2410_UFSTAT_TXFULL
+ .endm
+
+/* fifo level reading */
+
+ .macro fifo_level_s3c24xx rd, rx
+ @ check for arm920 vs arm926. currently assume all arm926
+ @ devices have an 64 byte FIFO identical to the s3c2440
+ mrc p15, 0, \rd, c0, c0
+ and \rd, \rd, #0xff0
+ teq \rd, #0x260
+ beq 10000f
+ mrc p15, 0, \rd, c1, c0
+ tst \rd, #1
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+ addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+ bic \rd, \rd, #0xff000
+ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ and \rd, \rd, #0x00ff0000
+ teq \rd, #0x00440000 @ is it 2440?
+
+10000:
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
+ andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
+ .endm
+
+ .macro fifo_level_s3c2410 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ and \rd, \rd, #S3C2410_UFSTAT_TXMASK
+ .endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
+#define fifo_full fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
+#define fifo_full fifo_full_s3c24xx
+#define fifo_level fifo_level_s3c24xx
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <asm/plat-s3c/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
new file mode 100644
index 0000000..891b53c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -0,0 +1,453 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C241XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS 0x40000000
+#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependant on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+ DMACH_XD0,
+ DMACH_XD1,
+ DMACH_SDI,
+ DMACH_SPI0,
+ DMACH_SPI1,
+ DMACH_UART0,
+ DMACH_UART1,
+ DMACH_UART2,
+ DMACH_TIMER,
+ DMACH_I2S_IN,
+ DMACH_I2S_OUT,
+ DMACH_PCM_IN,
+ DMACH_PCM_OUT,
+ DMACH_MIC_IN,
+ DMACH_USB_EP1,
+ DMACH_USB_EP2,
+ DMACH_USB_EP3,
+ DMACH_USB_EP4,
+ DMACH_UART0_SRC2, /* s3c2412 second uart sources */
+ DMACH_UART1_SRC2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3, /* s3c2443 has extra uart */
+ DMACH_UART3_SRC2,
+ DMACH_MAX, /* the end entry */
+};
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+/* we have 4 dma channels */
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS (4)
+#else
+#define S3C2410_DMA_CHANNELS (6)
+#endif
+
+/* types */
+
+enum s3c2410_dma_state {
+ S3C2410_DMA_IDLE,
+ S3C2410_DMA_RUNNING,
+ S3C2410_DMA_PAUSED
+};
+
+
+/* enum s3c2410_dma_loadst
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+enum s3c2410_dma_loadst {
+ S3C2410_DMALOAD_NONE,
+ S3C2410_DMALOAD_1LOADED,
+ S3C2410_DMALOAD_1RUNNING,
+ S3C2410_DMALOAD_1LOADED_1RUNNING,
+};
+
+enum s3c2410_dma_buffresult {
+ S3C2410_RES_OK,
+ S3C2410_RES_ERR,
+ S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+ S3C2410_DMASRC_HW, /* source is memory */
+ S3C2410_DMASRC_MEM /* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+ S3C2410_DMAOP_START,
+ S3C2410_DMAOP_STOP,
+ S3C2410_DMAOP_PAUSE,
+ S3C2410_DMAOP_RESUME,
+ S3C2410_DMAOP_FLUSH,
+ S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
+ S3C2410_DMAOP_STARTED, /* indicate channel started */
+};
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about
+ * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
+
+/* dma buffer */
+
+struct s3c2410_dma_client {
+ char *name;
+};
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+ struct s3c2410_dma_buf *next;
+ int magic; /* magic */
+ int size; /* buffer size in bytes */
+ dma_addr_t data; /* start of DMA data */
+ dma_addr_t ptr; /* where the DMA got to [1] */
+ void *id; /* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+ void *buf, int size,
+ enum s3c2410_dma_buffresult result);
+
+typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+ enum s3c2410_chan_op );
+
+struct s3c2410_dma_stats {
+ unsigned long loads;
+ unsigned long timeout_longest;
+ unsigned long timeout_shortest;
+ unsigned long timeout_avg;
+ unsigned long timeout_failed;
+};
+
+struct s3c2410_dma_map;
+
+/* struct s3c2410_dma_chan
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan {
+ /* channel state flags and information */
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char irq_claimed; /* irq claimed for channel */
+ unsigned char irq_enabled; /* irq enabled for channel */
+ unsigned char xfer_unit; /* size of an transfer */
+
+ /* channel state */
+
+ enum s3c2410_dma_state state;
+ enum s3c2410_dma_loadst load_state;
+ struct s3c2410_dma_client *client;
+
+ /* channel configuration */
+ enum s3c2410_dmasrc source;
+ unsigned long dev_addr;
+ unsigned long load_timeout;
+ unsigned int flags; /* channel flags */
+ unsigned int hw_cfg; /* last hw config */
+
+ struct s3c24xx_dma_map *map; /* channel hw maps */
+
+ /* channel's hardware position and configuration */
+ void __iomem *regs; /* channels registers */
+ void __iomem *addr_reg; /* data address register */
+ unsigned int irq; /* channel irq */
+ unsigned long dcon; /* default value of DCON */
+
+ /* driver handles */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel op callback */
+
+ /* stats gathering */
+ struct s3c2410_dma_stats *stats;
+ struct s3c2410_dma_stats stats_store;
+
+ /* buffer list and information */
+ struct s3c2410_dma_buf *curr; /* current dma buffer */
+ struct s3c2410_dma_buf *next; /* next buffer to load */
+ struct s3c2410_dma_buf *end; /* end of queue */
+
+ /* system device */
+ struct sys_device dev;
+};
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+ struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+ unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+ dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+ int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+ dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC (0x00)
+#define S3C2410_DMA_DISRCC (0x04)
+#define S3C2410_DMA_DIDST (0x08)
+#define S3C2410_DMA_DIDSTC (0x0C)
+#define S3C2410_DMA_DCON (0x10)
+#define S3C2410_DMA_DSTAT (0x14)
+#define S3C2410_DMA_DCSRC (0x18)
+#define S3C2410_DMA_DCDST (0x1C)
+#define S3C2410_DMA_DMASKTRIG (0x20)
+#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
+
+#define S3C2410_DISRCC_INC (1<<0)
+#define S3C2410_DISRCC_APB (1<<1)
+
+#define S3C2410_DMASKTRIG_STOP (1<<2)
+#define S3C2410_DMASKTRIG_ON (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND (0<<31)
+#define S3C2410_DCON_HANDSHAKE (1<<31)
+#define S3C2410_DCON_SYNC_PCLK (0<<30)
+#define S3C2410_DCON_SYNC_HCLK (1<<30)
+
+#define S3C2410_DCON_INTREQ (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
+#define S3C2410_DCON_CH0_UART0 (1<<24)
+#define S3C2410_DCON_CH0_SDI (2<<24)
+#define S3C2410_DCON_CH0_TIMER (3<<24)
+#define S3C2410_DCON_CH0_USBEP1 (4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
+#define S3C2410_DCON_CH1_UART1 (1<<24)
+#define S3C2410_DCON_CH1_I2SSDI (2<<24)
+#define S3C2410_DCON_CH1_SPI (3<<24)
+#define S3C2410_DCON_CH1_USBEP2 (4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO (0<<24)
+#define S3C2410_DCON_CH2_I2SSDI (1<<24)
+#define S3C2410_DCON_CH2_SDI (2<<24)
+#define S3C2410_DCON_CH2_TIMER (3<<24)
+#define S3C2410_DCON_CH2_USBEP3 (4<<24)
+
+#define S3C2410_DCON_CH3_UART2 (0<<24)
+#define S3C2410_DCON_CH3_SDI (1<<24)
+#define S3C2410_DCON_CH3_SPI (2<<24)
+#define S3C2410_DCON_CH3_TIMER (3<<24)
+#define S3C2410_DCON_CH3_USBEP4 (4<<24)
+
+#define S3C2410_DCON_SRCSHIFT (24)
+#define S3C2410_DCON_SRCMASK (7<<24)
+
+#define S3C2410_DCON_BYTE (0<<20)
+#define S3C2410_DCON_HALFWORD (1<<20)
+#define S3C2410_DCON_WORD (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD (1<<22)
+#define S3C2410_DCON_HWTRIG (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT (1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO (5<<24)
+#define S3C2440_DCON_CH0_PCMIN (6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT (5<<24)
+#define S3C2440_DCON_CH1_SDI (6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN (5<<24)
+#define S3C2440_DCON_CH2_MICIN (6<<24)
+
+#define S3C2440_DCON_CH3_MICIN (5<<24)
+#define S3C2440_DCON_CH3_PCMOUT (6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW (1)
+
+#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
new file mode 100644
index 0000000..473b3cd
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+*/
+
+#define INTPND (0x10)
+#define INTOFFSET (0x14)
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #S3C24XX_VA_IRQ
+
+ @@ try the interrupt offset register, since it is there
+
+ ldr \irqstat, [ \base, #INTPND ]
+ teq \irqstat, #0
+ beq 1002f
+ ldr \irqnr, [ \base, #INTOFFSET ]
+ mov \tmp, #1
+ tst \irqstat, \tmp, lsl \irqnr
+ bne 1001f
+
+ @@ the number specified is not a valid irq, so try
+ @@ and work it out for ourselves
+
+ mov \irqnr, #0 @@ start here
+
+ @@ work out which irq (if any) we got
+
+ movs \tmp, \irqstat, lsl#16
+ addeq \irqnr, \irqnr, #16
+ moveq \irqstat, \irqstat, lsr#16
+ tst \irqstat, #0xff
+ addeq \irqnr, \irqnr, #8
+ moveq \irqstat, \irqstat, lsr#8
+ tst \irqstat, #0xf
+ addeq \irqnr, \irqnr, #4
+ moveq \irqstat, \irqstat, lsr#4
+ tst \irqstat, #0x3
+ addeq \irqnr, \irqnr, #2
+ moveq \irqstat, \irqstat, lsr#2
+ tst \irqstat, #0x1
+ addeq \irqnr, \irqnr, #1
+
+ @@ we have the value
+1001:
+ adds \irqnr, \irqnr, #IRQ_EINT0
+1002:
+ @@ exit here, Z flag unset if IRQ
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
new file mode 100644
index 0000000..eee0654
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -0,0 +1,74 @@
+/* arch/arm/mach-s3c2410/include/mach/fb.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+#include <mach/regs-lcd.h>
+
+struct s3c2410fb_hw {
+ unsigned long lcdcon1;
+ unsigned long lcdcon2;
+ unsigned long lcdcon3;
+ unsigned long lcdcon4;
+ unsigned long lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+ /* LCD type */
+ unsigned type;
+
+ /* Screen size */
+ unsigned short width;
+ unsigned short height;
+
+ /* Screen info */
+ unsigned short xres;
+ unsigned short yres;
+ unsigned short bpp;
+
+ unsigned pixclock; /* pixclock in picoseconds */
+ unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
+
+ /* lcd configuration registers */
+ unsigned long lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+ struct s3c2410fb_display *displays; /* attached diplays info */
+ unsigned num_displays; /* number of defined displays */
+ unsigned default_display;
+
+ /* GPIOs */
+
+ unsigned long gpcup;
+ unsigned long gpcup_mask;
+ unsigned long gpccon;
+ unsigned long gpccon_mask;
+ unsigned long gpdup;
+ unsigned long gpdup_mask;
+ unsigned long gpdcon;
+ unsigned long gpdcon_mask;
+
+ /* lpc3600 control register */
+ unsigned long lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
new file mode 100644
index 0000000..3b52b86
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
new file mode 100644
index 0000000..d8a8327
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_LATCH_H
+#define __ASM_ARCH_H1940_LATCH_H
+
+
+#ifndef __ASSEMBLY__
+#define H1940_LATCH ((void __force __iomem *)0xF8000000)
+#else
+#define H1940_LATCH 0xF8000000
+#endif
+
+#define H1940_PA_LATCH (S3C2410_CS2)
+
+/* SD layer latch */
+
+#define H1940_LATCH_SDQ1 (1<<16)
+#define H1940_LATCH_LCD_P1 (1<<17)
+#define H1940_LATCH_LCD_P2 (1<<18)
+#define H1940_LATCH_LCD_P3 (1<<19)
+#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
+#define H1940_LATCH_LED_RED (1<<21)
+#define H1940_LATCH_SDQ7 (1<<22)
+#define H1940_LATCH_USB_DP (1<<23)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER (1<<24)
+#define H1940_LATCH_AUDIO_POWER (1<<25)
+#define H1940_LATCH_SM803_ENABLE (1<<26)
+#define H1940_LATCH_LCD_P4 (1<<27)
+#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
+#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
+#define H1940_LATCH_LED_GREEN (1<<30)
+#define H1940_LATCH_LED_FLASH (1<<31)
+
+/* default settings */
+
+#define H1940_LATCH_DEFAULT \
+ H1940_LATCH_LCD_P4 | \
+ H1940_LATCH_SM803_ENABLE | \
+ H1940_LATCH_SDQ1 | \
+ H1940_LATCH_LCD_P1 | \
+ H1940_LATCH_LCD_P2 | \
+ H1940_LATCH_LCD_P3 | \
+ H1940_LATCH_MAX1698_nSHUTDOWN | \
+ H1940_LATCH_CPUQ5
+
+/* control functions */
+
+extern void h1940_latch_control(unsigned int clear, unsigned int set);
+
+#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
new file mode 100644
index 0000000..4559784
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
+ *
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_H
+#define __ASM_ARCH_H1940_H
+
+#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT (0x30081000)
+#define H1940_SUSPEND_CHECK (0x30080000)
+
+extern void h1940_pm_return(void);
+
+#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
new file mode 100644
index 0000000..74d5a1a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -0,0 +1,137 @@
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ * < 0 = no pin
+ * >=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ * < 0 => error code
+ * 0 => enabled
+ * 1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
new file mode 100644
index 0000000..e9ddd70
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
new file mode 100644
index 0000000..9813dbf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ * from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ * (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
+ * and are translated to the start of IO. Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x) ((x) < (1<<28))
+
+#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+ "cmp %2, #(1<<28)\n\t" \
+ "mov %0, %2\n\t" \
+ "addcc %0, %0, %3\n\t" \
+ "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
+ : "=&r" (temp) \
+ : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
+ : "cc"); \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
+static inline unsigned sz __in##fnsuffix (unsigned int port) \
+{ \
+ unsigned long temp, value; \
+ __asm__ __volatile__( \
+ "cmp %2, #(1<<28)\n\t" \
+ "mov %0, %2\n\t" \
+ "addcc %0, %0, %3\n\t" \
+ "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
+ : "=&r" (temp), "=r" (value) \
+ : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
+ : "cc"); \
+ return (unsigned sz)value; \
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+ return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr) \
+ DECLARE_DYN_IN(sz,fnsuffix,instr) \
+ DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port) \
+({ \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "strb %0, [%1, #0] @ outbc" \
+ : : "r" (value), "r" ((port))); \
+})
+
+#define __inbc(port) \
+({ \
+ unsigned char result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, #0] @ inbc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __outwc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) { \
+ if ((port) < 256 && (port) > -256) \
+ __asm__ __volatile__( \
+ "strh %0, [%1, %2] @ outwc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
+ else if ((port) > 0) \
+ __asm__ __volatile__( \
+ "strh %0, [%1, %2] @ outwc" \
+ : : "r" (v), \
+ "r" (PCIO_BASE + ((port) & ~0xff)), \
+ "Jr" (((port) & 0xff))); \
+ else \
+ __asm__ __volatile__( \
+ "strh %0, [%1, #0] @ outwc" \
+ : : "r" (v), \
+ "r" (PCIO_BASE + (port))); \
+ } else \
+ __asm__ __volatile__( \
+ "strh %0, [%1, #0] @ outwc" \
+ : : "r" (v), "r" ((port))); \
+})
+
+#define __inwc(port) \
+({ \
+ unsigned short result; \
+ if (__PORT_PCIO((port))) { \
+ if ((port) < 256 && (port) > -256 ) \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, %2] @ inwc" \
+ : "=r" (result) \
+ : "r" (PCIO_BASE), \
+ "Jr" ((port))); \
+ else if ((port) > 0) \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, %2] @ inwc" \
+ : "=r" (result) \
+ : "r" (PCIO_BASE + ((port) & ~0xff)), \
+ "Jr" (((port) & 0xff))); \
+ else \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, #0] @ inwc" \
+ : "=r" (result) \
+ : "r" (PCIO_BASE + ((port)))); \
+ } else \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, #0] @ inwc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __outlc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, #0] @ outlc" \
+ : : "r" (v), "r" ((port))); \
+})
+
+#define __inlc(port) \
+({ \
+ unsigned long result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, #0] @ inlc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
+#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
+#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
+#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port) __ioaddr((port))
+
+#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x) (x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
new file mode 100644
index 0000000..950c71b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -0,0 +1,166 @@
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
+#define IRQ_EINT1 S3C2410_IRQ(1)
+#define IRQ_EINT2 S3C2410_IRQ(2)
+#define IRQ_EINT3 S3C2410_IRQ(3)
+#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
+#define IRQ_EINT8t23 S3C2410_IRQ(5)
+#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
+#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT S3C2410_IRQ(7)
+#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
+#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0 S3C2410_IRQ(10)
+#define IRQ_TIMER1 S3C2410_IRQ(11)
+#define IRQ_TIMER2 S3C2410_IRQ(12)
+#define IRQ_TIMER3 S3C2410_IRQ(13)
+#define IRQ_TIMER4 S3C2410_IRQ(14)
+#define IRQ_UART2 S3C2410_IRQ(15)
+#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
+#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1 S3C2410_IRQ(18)
+#define IRQ_DMA2 S3C2410_IRQ(19)
+#define IRQ_DMA3 S3C2410_IRQ(20)
+#define IRQ_SDI S3C2410_IRQ(21)
+#define IRQ_SPI0 S3C2410_IRQ(22)
+#define IRQ_UART1 S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
+#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
+#define IRQ_USBD S3C2410_IRQ(25)
+#define IRQ_USBH S3C2410_IRQ(26)
+#define IRQ_IIC S3C2410_IRQ(27)
+#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
+#define IRQ_SPI1 S3C2410_IRQ(29)
+#define IRQ_RTC S3C2410_IRQ(30)
+#define IRQ_ADCPARENT S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
+#define IRQ_EINT5 S3C2410_IRQ(33)
+#define IRQ_EINT6 S3C2410_IRQ(34)
+#define IRQ_EINT7 S3C2410_IRQ(35)
+#define IRQ_EINT8 S3C2410_IRQ(36)
+#define IRQ_EINT9 S3C2410_IRQ(37)
+#define IRQ_EINT10 S3C2410_IRQ(38)
+#define IRQ_EINT11 S3C2410_IRQ(39)
+#define IRQ_EINT12 S3C2410_IRQ(40)
+#define IRQ_EINT13 S3C2410_IRQ(41)
+#define IRQ_EINT14 S3C2410_IRQ(42)
+#define IRQ_EINT15 S3C2410_IRQ(43)
+#define IRQ_EINT16 S3C2410_IRQ(44)
+#define IRQ_EINT17 S3C2410_IRQ(45)
+#define IRQ_EINT18 S3C2410_IRQ(46)
+#define IRQ_EINT19 S3C2410_IRQ(47)
+#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
+#define IRQ_EINT21 S3C2410_IRQ(49)
+#define IRQ_EINT22 S3C2410_IRQ(50)
+#define IRQ_EINT23 S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
+
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
+
+#define IRQ_TC S3C2410_IRQSUB(9)
+#define IRQ_ADC S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
+#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
+#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
+#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+
+#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
new file mode 100644
index 0000000..d8a7672
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+ unsigned int gpio;
+ unsigned int flags;
+
+ char *name;
+ char *def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 0000000..64bf7e9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA (0x4B000000)
+#define S3C24XX_SZ_DMA SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C2410_PA_CLKPWR (0x4C000000)
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD (0x4D000000)
+#define S3C24XX_SZ_LCD SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND (0x4E000000)
+#define S3C24XX_SZ_NAND SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART S3C_VA_UART
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_SZ_UART SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC (0x54000000)
+#define S3C24XX_SZ_IIC SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS (0x55000000)
+#define S3C24XX_SZ_IIS SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC (0x57000000)
+#define S3C24XX_SZ_RTC SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC (0x58000000)
+#define S3C24XX_SZ_ADC SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI (0x59000000)
+#define S3C24XX_SZ_SPI SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI (0x5A000000)
+#define S3C24XX_SZ_SDI SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF (0x4F000000)
+#define S3C2440_SZ_CAMIF SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97 (0x5B000000)
+#define S3C2440_SZ_AC97 SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC (0x4A800000)
+#define S3C2443_SZ_HSMMC (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_UART S3C2410_PA_UART
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2410_PA_IIC
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
new file mode 100644
index 0000000..9378262
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ * from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ * Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x30000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
new file mode 100644
index 0000000..e9e36b0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL (0x3)
+#define OSIRIS_CTRL0_BOOT_INT (1<<3)
+#define OSIRIS_CTRL0_PCMCIA (1<<4)
+#define OSIRIS_CTRL0_FIX8 (1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
+
+#define OSIRIS_CTRL1_FIX8 (1<<0)
+
+#define OSIRIS_ID_REVMASK (0x7)
+
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
new file mode 100644
index 0000000..639eff5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
new file mode 100644
index 0000000..f9277a5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ * guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
new file mode 100644
index 0000000..d583688
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -0,0 +1,197 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE (1<<2)
+#define S3C2410_CLKCON_POWER (1<<3)
+#define S3C2410_CLKCON_NAND (1<<4)
+#define S3C2410_CLKCON_LCDC (1<<5)
+#define S3C2410_CLKCON_USBH (1<<6)
+#define S3C2410_CLKCON_USBD (1<<7)
+#define S3C2410_CLKCON_PWMT (1<<8)
+#define S3C2410_CLKCON_SDI (1<<9)
+#define S3C2410_CLKCON_UART0 (1<<10)
+#define S3C2410_CLKCON_UART1 (1<<11)
+#define S3C2410_CLKCON_UART2 (1<<12)
+#define S3C2410_CLKCON_GPIO (1<<13)
+#define S3C2410_CLKCON_RTC (1<<14)
+#define S3C2410_CLKCON_ADC (1<<15)
+#define S3C2410_CLKCON_IIC (1<<16)
+#define S3C2410_CLKCON_IIS (1<<17)
+#define S3C2410_CLKCON_SPI (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT 12
+#define S3C2410_PLLCON_PDIVSHIFT 4
+#define S3C2410_PLLCON_SDIVSHIFT 0
+#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK 3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
+
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
+#define S3C2410_CLKSLOW_SLOW (1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2410_PLLCON_MDIVMASK;
+ pdiv &= S3C2410_PLLCON_PDIVMASK;
+ sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA (1<<19)
+#define S3C2440_CLKCON_AC97 (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF (1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
+
+#define S3C2412_CLKCON_WDT (1<<28)
+#define S3C2412_CLKCON_SPI (1<<27)
+#define S3C2412_CLKCON_IIS (1<<26)
+#define S3C2412_CLKCON_IIC (1<<25)
+#define S3C2412_CLKCON_ADC (1<<24)
+#define S3C2412_CLKCON_RTC (1<<23)
+#define S3C2412_CLKCON_GPIO (1<<22)
+#define S3C2412_CLKCON_UART2 (1<<21)
+#define S3C2412_CLKCON_UART1 (1<<20)
+#define S3C2412_CLKCON_UART0 (1<<19)
+#define S3C2412_CLKCON_SDI (1<<18)
+#define S3C2412_CLKCON_PWMT (1<<17)
+#define S3C2412_CLKCON_USBD (1<<16)
+#define S3C2412_CLKCON_CAMCLK (1<<15)
+#define S3C2412_CLKCON_UARTCLK (1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48 (1<<12)
+#define S3C2412_CLKCON_USB_DEV48 (1<<11)
+#define S3C2412_CLKCON_HCLKdiv2 (1<<10)
+#define S3C2412_CLKCON_HCLKx2 (1<<9)
+#define S3C2412_CLKCON_SDRAM (1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3 (1<<3)
+#define S3C2412_CLKCON_DMA2 (1<<2)
+#define S3C2412_CLKCON_DMA1 (1<<1)
+#define S3C2412_CLKCON_DMA0 (1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
new file mode 100644
index 0000000..3c3853c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -0,0 +1,184 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#if defined(CONFIG_CPU_S3C2412)
+#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
+#endif
+
+#if defined(CONFIG_CPU_S3C244X)
+
+#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE (1<<31)
+
+#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA (0<<8)
+#define S3C2440_DSC0_ADDR_10mA (1<<8)
+#define S3C2440_DSC0_ADDR_8mA (2<<8)
+#define S3C2440_DSC0_ADDR_6mA (3<<8)
+#define S3C2440_DSC0_ADDR_MASK (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA (2<<6)
+#define S3C2440_DSC0_DATA3_6mA (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA (2<<4)
+#define S3C2440_DSC0_DATA2_6mA (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA (2<<2)
+#define S3C2440_DSC0_DATA1_6mA (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA (2<<0)
+#define S3C2440_DSC0_DATA0_6mA (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA (0<<28)
+#define S3C2440_DSC1_SCK1_10mA (1<<28)
+#define S3C2440_DSC1_SCK1_8mA (2<<28)
+#define S3C2440_DSC1_SCK1_6mA (3<<28)
+#define S3C2440_DSC1_SCK1_MASK (3<<28)
+
+#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA (0<<26)
+#define S3C2440_DSC1_SCK0_10mA (1<<26)
+#define S3C2440_DSC1_SCK0_8mA (2<<26)
+#define S3C2440_DSC1_SCK0_6mA (3<<26)
+#define S3C2440_DSC1_SCK0_MASK (3<<26)
+
+#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA (0<<24)
+#define S3C2440_DSC1_SCKE_8mA (1<<24)
+#define S3C2440_DSC1_SCKE_6mA (2<<24)
+#define S3C2440_DSC1_SCKE_4mA (3<<24)
+#define S3C2440_DSC1_SCKE_MASK (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA (0<<22)
+#define S3C2440_DSC1_SDR_8mA (1<<22)
+#define S3C2440_DSC1_SDR_6mA (2<<22)
+#define S3C2440_DSC1_SDR_4mA (3<<22)
+#define S3C2440_DSC1_SDR_MASK (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA (0<<20)
+#define S3C2440_DSC1_NFC_8mA (1<<20)
+#define S3C2440_DSC1_NFC_6mA (2<<20)
+#define S3C2440_DSC1_NFC_4mA (3<<20)
+#define S3C2440_DSC1_NFC_MASK (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA (0<<18)
+#define S3C2440_DSC1_nBE_8mA (1<<18)
+#define S3C2440_DSC1_nBE_6mA (2<<18)
+#define S3C2440_DSC1_nBE_4mA (3<<18)
+#define S3C2440_DSC1_nBE_MASK (3<<18)
+
+#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA (0<<16)
+#define S3C2440_DSC1_WOE_8mA (1<<16)
+#define S3C2440_DSC1_WOE_6mA (2<<16)
+#define S3C2440_DSC1_WOE_4mA (3<<16)
+#define S3C2440_DSC1_WOE_MASK (3<<16)
+
+#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA (0<<14)
+#define S3C2440_DSC1_CS7_8mA (1<<14)
+#define S3C2440_DSC1_CS7_6mA (2<<14)
+#define S3C2440_DSC1_CS7_4mA (3<<14)
+#define S3C2440_DSC1_CS7_MASK (3<<14)
+
+#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA (0<<12)
+#define S3C2440_DSC1_CS6_8mA (1<<12)
+#define S3C2440_DSC1_CS6_6mA (2<<12)
+#define S3C2440_DSC1_CS6_4mA (3<<12)
+#define S3C2440_DSC1_CS6_MASK (3<<12)
+
+#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA (0<<10)
+#define S3C2440_DSC1_CS5_8mA (1<<10)
+#define S3C2440_DSC1_CS5_6mA (2<<10)
+#define S3C2440_DSC1_CS5_4mA (3<<10)
+#define S3C2440_DSC1_CS5_MASK (3<<10)
+
+#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA (0<<8)
+#define S3C2440_DSC1_CS4_8mA (1<<8)
+#define S3C2440_DSC1_CS4_6mA (2<<8)
+#define S3C2440_DSC1_CS4_4mA (3<<8)
+#define S3C2440_DSC1_CS4_MASK (3<<8)
+
+#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA (0<<6)
+#define S3C2440_DSC1_CS3_8mA (1<<6)
+#define S3C2440_DSC1_CS3_6mA (2<<6)
+#define S3C2440_DSC1_CS3_4mA (3<<6)
+#define S3C2440_DSC1_CS3_MASK (3<<6)
+
+#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA (0<<4)
+#define S3C2440_DSC1_CS2_8mA (1<<4)
+#define S3C2440_DSC1_CS2_6mA (2<<4)
+#define S3C2440_DSC1_CS2_4mA (3<<4)
+#define S3C2440_DSC1_CS2_MASK (3<<4)
+
+#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA (0<<2)
+#define S3C2440_DSC1_CS1_8mA (1<<2)
+#define S3C2440_DSC1_CS1_6mA (2<<2)
+#define S3C2440_DSC1_CS1_4mA (3<<2)
+#define S3C2440_DSC1_CS1_MASK (3<<2)
+
+#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0)
+#define S3C2440_DSC1_CS0_10mA (0<<0)
+#define S3C2440_DSC1_CS0_8mA (1<<0)
+#define S3C2440_DSC1_CS0_6mA (2<<0)
+#define S3C2440_DSC1_CS0_4mA (3<<0)
+#define S3C2440_DSC1_CS0_MASK (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif /* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
new file mode 100644
index 0000000..30bec02
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -0,0 +1,1163 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA (32*0)
+#define S3C2410_GPIO_BANKB (32*1)
+#define S3C2410_GPIO_BANKC (32*2)
+#define S3C2410_GPIO_BANKD (32*3)
+#define S3C2410_GPIO_BANKE (32*4)
+#define S3C2410_GPIO_BANKF (32*5)
+#define S3C2410_GPIO_BANKG (32*6)
+#define S3C2410_GPIO_BANKH (32*7)
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
+ (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
+ S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+ S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
+#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
+#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * S3C2400: 18bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
+
+#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT (0<<0)
+#define S3C2410_GPA0_ADDR0 (1<<0)
+
+#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT (0<<1)
+#define S3C2410_GPA1_ADDR16 (1<<1)
+
+#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT (0<<2)
+#define S3C2410_GPA2_ADDR17 (1<<2)
+
+#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT (0<<3)
+#define S3C2410_GPA3_ADDR18 (1<<3)
+
+#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT (0<<4)
+#define S3C2410_GPA4_ADDR19 (1<<4)
+
+#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT (0<<5)
+#define S3C2410_GPA5_ADDR20 (1<<5)
+
+#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT (0<<6)
+#define S3C2410_GPA6_ADDR21 (1<<6)
+
+#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT (0<<7)
+#define S3C2410_GPA7_ADDR22 (1<<7)
+
+#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT (0<<8)
+#define S3C2410_GPA8_ADDR23 (1<<8)
+
+#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT (0<<9)
+#define S3C2410_GPA9_ADDR24 (1<<9)
+
+#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE (1<<10)
+
+#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0 (1<<11)
+
+#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT (0<<12)
+#define S3C2410_GPA12_nGCS1 (1<<12)
+#define S3C2400_GPA12_nCAS1 (1<<12)
+
+#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT (0<<13)
+#define S3C2410_GPA13_nGCS2 (1<<13)
+#define S3C2400_GPA13_nGCS1 (1<<13)
+
+#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT (0<<14)
+#define S3C2410_GPA14_nGCS3 (1<<14)
+#define S3C2400_GPA14_nGCS2 (1<<14)
+
+#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT (0<<15)
+#define S3C2410_GPA15_nGCS4 (1<<15)
+#define S3C2400_GPA15_nGCS3 (1<<15)
+
+#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT (0<<16)
+#define S3C2410_GPA16_nGCS5 (1<<16)
+#define S3C2400_GPA16_nGCS4 (1<<16)
+
+#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT (0<<17)
+#define S3C2410_GPA17_CLE (1<<17)
+#define S3C2400_GPA17_nGCS5 (1<<17)
+
+#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT (0<<18)
+#define S3C2410_GPA18_ALE (1<<18)
+
+#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT (0<<19)
+#define S3C2410_GPA19_nFWE (1<<19)
+
+#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT (0<<20)
+#define S3C2410_GPA20_nFRE (1<<20)
+
+#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT (0<<22)
+#define S3C2410_GPA22_nFCE (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=data, 11=special function
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
+
+#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP (0x00 << 0)
+#define S3C2410_GPB0_OUTP (0x01 << 0)
+#define S3C2410_GPB0_TOUT0 (0x02 << 0)
+#define S3C2400_GPB0_DATA16 (0x02 << 0)
+
+#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP (0x00 << 2)
+#define S3C2410_GPB1_OUTP (0x01 << 2)
+#define S3C2410_GPB1_TOUT1 (0x02 << 2)
+#define S3C2400_GPB1_DATA17 (0x02 << 2)
+
+#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP (0x00 << 4)
+#define S3C2410_GPB2_OUTP (0x01 << 4)
+#define S3C2410_GPB2_TOUT2 (0x02 << 4)
+#define S3C2400_GPB2_DATA18 (0x02 << 4)
+#define S3C2400_GPB2_TCLK1 (0x03 << 4)
+
+#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP (0x00 << 6)
+#define S3C2410_GPB3_OUTP (0x01 << 6)
+#define S3C2410_GPB3_TOUT3 (0x02 << 6)
+#define S3C2400_GPB3_DATA19 (0x02 << 6)
+#define S3C2400_GPB3_TXD1 (0x03 << 6)
+
+#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP (0x00 << 8)
+#define S3C2410_GPB4_OUTP (0x01 << 8)
+#define S3C2410_GPB4_TCLK0 (0x02 << 8)
+#define S3C2400_GPB4_DATA20 (0x02 << 8)
+#define S3C2410_GPB4_MASK (0x03 << 8)
+#define S3C2400_GPB4_RXD1 (0x03 << 8)
+#define S3C2400_GPB4_MASK (0x03 << 8)
+
+#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP (0x00 << 10)
+#define S3C2410_GPB5_OUTP (0x01 << 10)
+#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2443_GPB5_XBACK (0x03 << 10)
+#define S3C2400_GPB5_DATA21 (0x02 << 10)
+#define S3C2400_GPB5_nCTS1 (0x03 << 10)
+
+#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP (0x00 << 12)
+#define S3C2410_GPB6_OUTP (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2443_GPB6_XBREQ (0x03 << 12)
+#define S3C2400_GPB6_DATA22 (0x02 << 12)
+#define S3C2400_GPB6_nRTS1 (0x03 << 12)
+
+#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP (0x00 << 14)
+#define S3C2410_GPB7_OUTP (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1 (0x03 << 14)
+#define S3C2400_GPB7_DATA23 (0x02 << 14)
+
+#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP (0x00 << 16)
+#define S3C2410_GPB8_OUTP (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24 (0x02 << 16)
+
+#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP (0x00 << 18)
+#define S3C2410_GPB9_OUTP (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0 (0x03 << 18)
+#define S3C2400_GPB9_DATA25 (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI (0x03 << 18)
+
+#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP (0x00 << 20)
+#define S3C2410_GPB10_OUTP (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS (0x03 << 20)
+
+#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP (0x00 << 22)
+#define S3C2400_GPB11_OUTP (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP (0x00 << 24)
+#define S3C2400_GPB12_OUTP (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP (0x00 << 26)
+#define S3C2400_GPB13_OUTP (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP (0x00 << 28)
+#define S3C2400_GPB14_OUTP (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP (0x00 << 30)
+#define S3C2400_GPB15_OUTP (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x) (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
+
+#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
+
+#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP (0x00 << 0)
+#define S3C2410_GPC0_OUTP (0x01 << 0)
+#define S3C2410_GPC0_LEND (0x02 << 0)
+#define S3C2400_GPC0_VD0 (0x02 << 0)
+
+#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP (0x00 << 2)
+#define S3C2410_GPC1_OUTP (0x01 << 2)
+#define S3C2410_GPC1_VCLK (0x02 << 2)
+#define S3C2400_GPC1_VD1 (0x02 << 2)
+
+#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP (0x00 << 4)
+#define S3C2410_GPC2_OUTP (0x01 << 4)
+#define S3C2410_GPC2_VLINE (0x02 << 4)
+#define S3C2400_GPC2_VD2 (0x02 << 4)
+
+#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP (0x00 << 6)
+#define S3C2410_GPC3_OUTP (0x01 << 6)
+#define S3C2410_GPC3_VFRAME (0x02 << 6)
+#define S3C2400_GPC3_VD3 (0x02 << 6)
+
+#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP (0x00 << 8)
+#define S3C2410_GPC4_OUTP (0x01 << 8)
+#define S3C2410_GPC4_VM (0x02 << 8)
+#define S3C2400_GPC4_VD4 (0x02 << 8)
+
+#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP (0x00 << 10)
+#define S3C2410_GPC5_OUTP (0x01 << 10)
+#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
+#define S3C2400_GPC5_VD5 (0x02 << 10)
+
+#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP (0x00 << 12)
+#define S3C2410_GPC6_OUTP (0x01 << 12)
+#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
+#define S3C2400_GPC6_VD6 (0x02 << 12)
+
+#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP (0x00 << 14)
+#define S3C2410_GPC7_OUTP (0x01 << 14)
+#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
+#define S3C2400_GPC7_VD7 (0x02 << 14)
+
+#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP (0x00 << 16)
+#define S3C2410_GPC8_OUTP (0x01 << 16)
+#define S3C2410_GPC8_VD0 (0x02 << 16)
+#define S3C2400_GPC8_VD8 (0x02 << 16)
+
+#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP (0x00 << 18)
+#define S3C2410_GPC9_OUTP (0x01 << 18)
+#define S3C2410_GPC9_VD1 (0x02 << 18)
+#define S3C2400_GPC9_VD9 (0x02 << 18)
+
+#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP (0x00 << 20)
+#define S3C2410_GPC10_OUTP (0x01 << 20)
+#define S3C2410_GPC10_VD2 (0x02 << 20)
+#define S3C2400_GPC10_VD10 (0x02 << 20)
+
+#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP (0x00 << 22)
+#define S3C2410_GPC11_OUTP (0x01 << 22)
+#define S3C2410_GPC11_VD3 (0x02 << 22)
+#define S3C2400_GPC11_VD11 (0x02 << 22)
+
+#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP (0x00 << 24)
+#define S3C2410_GPC12_OUTP (0x01 << 24)
+#define S3C2410_GPC12_VD4 (0x02 << 24)
+#define S3C2400_GPC12_VD12 (0x02 << 24)
+
+#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP (0x00 << 26)
+#define S3C2410_GPC13_OUTP (0x01 << 26)
+#define S3C2410_GPC13_VD5 (0x02 << 26)
+#define S3C2400_GPC13_VD13 (0x02 << 26)
+
+#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP (0x00 << 28)
+#define S3C2410_GPC14_OUTP (0x01 << 28)
+#define S3C2410_GPC14_VD6 (0x02 << 28)
+#define S3C2400_GPC14_VD14 (0x02 << 28)
+
+#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP (0x00 << 30)
+#define S3C2410_GPC15_OUTP (0x01 << 30)
+#define S3C2410_GPC15_VD7 (0x02 << 30)
+#define S3C2400_GPC15_VD15 (0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x) (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
+
+#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP (0x00 << 0)
+#define S3C2410_GPD0_OUTP (0x01 << 0)
+#define S3C2410_GPD0_VD8 (0x02 << 0)
+#define S3C2400_GPD0_VFRAME (0x02 << 0)
+#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
+
+#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP (0x00 << 2)
+#define S3C2410_GPD1_OUTP (0x01 << 2)
+#define S3C2410_GPD1_VD9 (0x02 << 2)
+#define S3C2400_GPD1_VM (0x02 << 2)
+#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
+
+#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP (0x00 << 4)
+#define S3C2410_GPD2_OUTP (0x01 << 4)
+#define S3C2410_GPD2_VD10 (0x02 << 4)
+#define S3C2400_GPD2_VLINE (0x02 << 4)
+
+#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP (0x00 << 6)
+#define S3C2410_GPD3_OUTP (0x01 << 6)
+#define S3C2410_GPD3_VD11 (0x02 << 6)
+#define S3C2400_GPD3_VCLK (0x02 << 6)
+
+#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP (0x00 << 8)
+#define S3C2410_GPD4_OUTP (0x01 << 8)
+#define S3C2410_GPD4_VD12 (0x02 << 8)
+#define S3C2400_GPD4_LEND (0x02 << 8)
+
+#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP (0x00 << 10)
+#define S3C2410_GPD5_OUTP (0x01 << 10)
+#define S3C2410_GPD5_VD13 (0x02 << 10)
+#define S3C2400_GPD5_TOUT0 (0x02 << 10)
+
+#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP (0x00 << 12)
+#define S3C2410_GPD6_OUTP (0x01 << 12)
+#define S3C2410_GPD6_VD14 (0x02 << 12)
+#define S3C2400_GPD6_TOUT1 (0x02 << 12)
+
+#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP (0x00 << 14)
+#define S3C2410_GPD7_OUTP (0x01 << 14)
+#define S3C2410_GPD7_VD15 (0x02 << 14)
+#define S3C2400_GPD7_TOUT2 (0x02 << 14)
+
+#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP (0x00 << 16)
+#define S3C2410_GPD8_OUTP (0x01 << 16)
+#define S3C2410_GPD8_VD16 (0x02 << 16)
+#define S3C2400_GPD8_TOUT3 (0x02 << 16)
+
+#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP (0x00 << 18)
+#define S3C2410_GPD9_OUTP (0x01 << 18)
+#define S3C2410_GPD9_VD17 (0x02 << 18)
+#define S3C2400_GPD9_TCLK0 (0x02 << 18)
+#define S3C2410_GPD9_MASK (0x03 << 18)
+
+#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP (0x00 << 20)
+#define S3C2410_GPD10_OUTP (0x01 << 20)
+#define S3C2410_GPD10_VD18 (0x02 << 20)
+#define S3C2400_GPD10_nWAIT (0x02 << 20)
+
+#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP (0x00 << 22)
+#define S3C2410_GPD11_OUTP (0x01 << 22)
+#define S3C2410_GPD11_VD19 (0x02 << 22)
+
+#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP (0x00 << 24)
+#define S3C2410_GPD12_OUTP (0x01 << 24)
+#define S3C2410_GPD12_VD20 (0x02 << 24)
+
+#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP (0x00 << 26)
+#define S3C2410_GPD13_OUTP (0x01 << 26)
+#define S3C2410_GPD13_VD21 (0x02 << 26)
+
+#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP (0x00 << 28)
+#define S3C2410_GPD14_OUTP (0x01 << 28)
+#define S3C2410_GPD14_VD22 (0x02 << 28)
+#define S3C2410_GPD14_nSS1 (0x03 << 28)
+
+#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP (0x00 << 30)
+#define S3C2410_GPD15_OUTP (0x01 << 30)
+#define S3C2410_GPD15_VD23 (0x02 << 30)
+#define S3C2410_GPD15_nSS0 (0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
+
+#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
+
+#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP (0x00 << 0)
+#define S3C2410_GPE0_OUTP (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2400_GPE0_EINT0 (0x02 << 0)
+#define S3C2410_GPE0_MASK (0x03 << 0)
+
+#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP (0x00 << 2)
+#define S3C2410_GPE1_OUTP (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
+#define S3C2400_GPE1_EINT1 (0x02 << 2)
+#define S3C2400_GPE1_nSS (0x03 << 2)
+#define S3C2410_GPE1_MASK (0x03 << 2)
+
+#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP (0x00 << 4)
+#define S3C2410_GPE2_OUTP (0x01 << 4)
+#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+#define S3C2400_GPE2_EINT2 (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI (0x03 << 4)
+
+#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP (0x00 << 6)
+#define S3C2410_GPE3_OUTP (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI (0x03 << 6)
+#define S3C2400_GPE3_EINT3 (0x02 << 6)
+#define S3C2400_GPE3_nCTS1 (0x03 << 6)
+#define S3C2410_GPE3_nSS0 (0x03 << 6)
+#define S3C2410_GPE3_MASK (0x03 << 6)
+
+#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP (0x00 << 8)
+#define S3C2410_GPE4_OUTP (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO (0x03 << 8)
+#define S3C2400_GPE4_EINT4 (0x02 << 8)
+#define S3C2400_GPE4_nRTS1 (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI (0x03 << 8)
+#define S3C2410_GPE4_MASK (0x03 << 8)
+
+#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP (0x00 << 10)
+#define S3C2410_GPE5_OUTP (0x01 << 10)
+#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
+#define S3C2400_GPE5_EINT5 (0x02 << 10)
+#define S3C2400_GPE5_TCLK1 (0x03 << 10)
+
+#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP (0x00 << 12)
+#define S3C2410_GPE6_OUTP (0x01 << 12)
+#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2400_GPE6_EINT6 (0x02 << 12)
+
+#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP (0x00 << 14)
+#define S3C2410_GPE7_OUTP (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI (0x03 << 14)
+#define S3C2400_GPE7_EINT7 (0x02 << 14)
+
+#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP (0x00 << 16)
+#define S3C2410_GPE8_OUTP (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO (0x03 << 16)
+#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
+
+#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP (0x00 << 18)
+#define S3C2410_GPE9_OUTP (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
+#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
+#define S3C2400_GPE9_nXBACK (0x03 << 18)
+
+#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP (0x00 << 20)
+#define S3C2410_GPE10_OUTP (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
+#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
+
+#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP (0x00 << 22)
+#define S3C2410_GPE11_OUTP (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ (0x03 << 22)
+
+#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP (0x00 << 24)
+#define S3C2410_GPE12_OUTP (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP (0x00 << 26)
+#define S3C2410_GPE13_OUTP (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
+
+#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP (0x00 << 28)
+#define S3C2410_GPE14_OUTP (0x01 << 28)
+#define S3C2410_GPE14_IICSCL (0x02 << 28)
+#define S3C2410_GPE14_MASK (0x03 << 28)
+
+#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP (0x00 << 30)
+#define S3C2410_GPE15_OUTP (0x01 << 30)
+#define S3C2410_GPE15_IICSDA (0x02 << 30)
+#define S3C2410_GPE15_MASK (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
+#define S3C2440_GPE2_ACRESET (0x03 << 4)
+#define S3C2440_GPE3_ACIN (0x03 << 6)
+#define S3C2440_GPE4_ACOUT (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
+
+#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
+
+#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP (0x00 << 0)
+#define S3C2410_GPF0_OUTP (0x01 << 0)
+#define S3C2410_GPF0_EINT0 (0x02 << 0)
+#define S3C2400_GPF0_RXD0 (0x02 << 0)
+
+#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP (0x00 << 2)
+#define S3C2410_GPF1_OUTP (0x01 << 2)
+#define S3C2410_GPF1_EINT1 (0x02 << 2)
+#define S3C2400_GPF1_RXD1 (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
+
+#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP (0x00 << 4)
+#define S3C2410_GPF2_OUTP (0x01 << 4)
+#define S3C2410_GPF2_EINT2 (0x02 << 4)
+#define S3C2400_GPF2_TXD0 (0x02 << 4)
+
+#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP (0x00 << 6)
+#define S3C2410_GPF3_OUTP (0x01 << 6)
+#define S3C2410_GPF3_EINT3 (0x02 << 6)
+#define S3C2400_GPF3_TXD1 (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
+
+#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP (0x00 << 8)
+#define S3C2410_GPF4_OUTP (0x01 << 8)
+#define S3C2410_GPF4_EINT4 (0x02 << 8)
+#define S3C2400_GPF4_nRTS0 (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
+
+#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP (0x00 << 10)
+#define S3C2410_GPF5_OUTP (0x01 << 10)
+#define S3C2410_GPF5_EINT5 (0x02 << 10)
+#define S3C2400_GPF5_nCTS0 (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
+
+#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP (0x00 << 12)
+#define S3C2410_GPF6_OUTP (0x01 << 12)
+#define S3C2410_GPF6_EINT6 (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
+
+#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP (0x00 << 14)
+#define S3C2410_GPF7_OUTP (0x01 << 14)
+#define S3C2410_GPF7_EINT7 (0x02 << 14)
+
+#define S3C2410_GPF_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
+*/
+
+#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
+
+#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
+
+#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP (0x00 << 0)
+#define S3C2410_GPG0_OUTP (0x01 << 0)
+#define S3C2410_GPG0_EINT8 (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
+
+#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP (0x00 << 2)
+#define S3C2410_GPG1_OUTP (0x01 << 2)
+#define S3C2410_GPG1_EINT9 (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
+
+#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP (0x00 << 4)
+#define S3C2410_GPG2_OUTP (0x01 << 4)
+#define S3C2410_GPG2_EINT10 (0x02 << 4)
+#define S3C2410_GPG2_nSS0 (0x03 << 4)
+#define S3C2400_GPG2_CDCLK (0x02 << 4)
+
+#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP (0x00 << 6)
+#define S3C2410_GPG3_OUTP (0x01 << 6)
+#define S3C2410_GPG3_EINT11 (0x02 << 6)
+#define S3C2410_GPG3_nSS1 (0x03 << 6)
+#define S3C2400_GPG3_I2SSDO (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI (0x03 << 6)
+
+#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP (0x00 << 8)
+#define S3C2410_GPG4_OUTP (0x01 << 8)
+#define S3C2410_GPG4_EINT12 (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI (0x03 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP (0x00 << 10)
+#define S3C2410_GPG5_OUTP (0x01 << 10)
+#define S3C2410_GPG5_EINT13 (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD (0x02 << 10)
+#define S3C2400_GPG5_IICSDA (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
+
+#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP (0x00 << 12)
+#define S3C2410_GPG6_OUTP (0x01 << 12)
+#define S3C2410_GPG6_EINT14 (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT (0x02 << 12)
+#define S3C2400_GPG6_IICSCL (0x03 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP (0x00 << 14)
+#define S3C2410_GPG7_OUTP (0x01 << 14)
+#define S3C2410_GPG7_EINT15 (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO (0x02 << 14)
+#define S3C2400_GPG7_IICSDA (0x03 << 14)
+
+#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP (0x00 << 16)
+#define S3C2410_GPG8_OUTP (0x01 << 16)
+#define S3C2410_GPG8_EINT16 (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
+#define S3C2400_GPG8_IICSCL (0x03 << 16)
+
+#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP (0x00 << 18)
+#define S3C2410_GPG9_OUTP (0x01 << 18)
+#define S3C2410_GPG9_EINT17 (0x02 << 18)
+#define S3C2400_GPG9_SPICLK (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK (0x03 << 18)
+
+#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP (0x00 << 20)
+#define S3C2410_GPG10_OUTP (0x01 << 20)
+#define S3C2410_GPG10_EINT18 (0x02 << 20)
+
+#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP (0x00 << 22)
+#define S3C2410_GPG11_OUTP (0x01 << 22)
+#define S3C2410_GPG11_EINT19 (0x02 << 22)
+#define S3C2410_GPG11_TCLK1 (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP (0x00 << 24)
+#define S3C2410_GPG12_OUTP (0x01 << 24)
+#define S3C2410_GPG12_EINT20 (0x02 << 24)
+#define S3C2410_GPG12_XMON (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP (0x00 << 26)
+#define S3C2410_GPG13_OUTP (0x01 << 26)
+#define S3C2410_GPG13_EINT21 (0x02 << 26)
+#define S3C2410_GPG13_nXPON (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP (0x00 << 28)
+#define S3C2410_GPG14_OUTP (0x01 << 28)
+#define S3C2410_GPG14_EINT22 (0x02 << 28)
+#define S3C2410_GPG14_YMON (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP (0x00 << 30)
+#define S3C2410_GPG15_OUTP (0x01 << 30)
+#define S3C2410_GPG15_EINT23 (0x02 << 30)
+#define S3C2410_GPG15_nYPON (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x) (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP (0x00 << 0)
+#define S3C2410_GPH0_OUTP (0x01 << 0)
+#define S3C2410_GPH0_nCTS0 (0x02 << 0)
+
+#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP (0x00 << 2)
+#define S3C2410_GPH1_OUTP (0x01 << 2)
+#define S3C2410_GPH1_nRTS0 (0x02 << 2)
+
+#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP (0x00 << 4)
+#define S3C2410_GPH2_OUTP (0x01 << 4)
+#define S3C2410_GPH2_TXD0 (0x02 << 4)
+
+#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP (0x00 << 6)
+#define S3C2410_GPH3_OUTP (0x01 << 6)
+#define S3C2410_GPH3_RXD0 (0x02 << 6)
+
+#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP (0x00 << 8)
+#define S3C2410_GPH4_OUTP (0x01 << 8)
+#define S3C2410_GPH4_TXD1 (0x02 << 8)
+
+#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP (0x00 << 10)
+#define S3C2410_GPH5_OUTP (0x01 << 10)
+#define S3C2410_GPH5_RXD1 (0x02 << 10)
+
+#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP (0x00 << 12)
+#define S3C2410_GPH6_OUTP (0x01 << 12)
+#define S3C2410_GPH6_TXD2 (0x02 << 12)
+#define S3C2410_GPH6_nRTS1 (0x03 << 12)
+
+#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP (0x00 << 14)
+#define S3C2410_GPH7_OUTP (0x01 << 14)
+#define S3C2410_GPH7_RXD2 (0x02 << 14)
+#define S3C2410_GPH7_nCTS1 (0x03 << 14)
+
+#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP (0x00 << 16)
+#define S3C2410_GPH8_OUTP (0x01 << 16)
+#define S3C2410_GPH8_UCLK (0x02 << 16)
+
+#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP (0x00 << 18)
+#define S3C2410_GPH9_OUTP (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
+
+#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP (0x00 << 20)
+#define S3C2410_GPH10_OUTP (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/* miscellaneous control */
+#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
+#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
+
+#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
+
+#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
+
+#define S3C2410_MISCCR_USBDEV (0<<3)
+#define S3C2410_MISCCR_USBHOST (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
+#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV (0x00)
+#define S3C2410_EXTINT_HILEV (0x01)
+#define S3C2410_EXTINT_FALLEDGE (0x02)
+#define S3C2410_EXTINT_RISEEDGE (0x04)
+#define S3C2410_EXTINT_BOTHEDGE (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK (0x00)
+#define S3C2410_EINTFLT_EXTCLK (1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT (1<<3)
+#define S3C2410_GSTATUS0_NCON (1<<2)
+#define S3C2410_GSTATUS0_RnB (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
+#define S3C2410_GSTATUS1_2410 (0x32410000)
+#define S3C2410_GSTATUS1_2412 (0x32412001)
+#define S3C2410_GSTATUS1_2440 (0x32440000)
+#define S3C2410_GSTATUS1_2442 (0x32440aaa)
+
+#define S3C2410_GSTATUS2_WTRESET (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET (1<<1)
+#define S3C2410_GSTATUS2_PONRESET (1<<0)
+
+/* open drain control register */
+#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW (0x0)
+#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL (0x33333333)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
new file mode 100644
index 0000000..1202ca5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -0,0 +1,106 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ (416)
+
+#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
+
+#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
+
+#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP (0x00 << 0)
+#define S3C2440_GPJ0_OUTP (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
+
+#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP (0x00 << 2)
+#define S3C2440_GPJ1_OUTP (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
+
+#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP (0x00 << 4)
+#define S3C2440_GPJ2_OUTP (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
+
+#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP (0x00 << 6)
+#define S3C2440_GPJ3_OUTP (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
+
+#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP (0x00 << 8)
+#define S3C2440_GPJ4_OUTP (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
+
+#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP (0x00 << 10)
+#define S3C2440_GPJ5_OUTP (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
+
+#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP (0x00 << 12)
+#define S3C2440_GPJ6_OUTP (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
+
+#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP (0x00 << 14)
+#define S3C2440_GPJ7_OUTP (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
+
+#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP (0x00 << 16)
+#define S3C2440_GPJ8_OUTP (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
+
+#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP (0x00 << 18)
+#define S3C2440_GPJ9_OUTP (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
+
+#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP (0x00 << 20)
+#define S3C2440_GPJ10_OUTP (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
+
+#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP (0x00 << 22)
+#define S3C2440_GPJ11_OUTP (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP (0x00 << 24)
+#define S3C2440_GPJ12_OUTP (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
+
+#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
+#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
+#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
+
+#endif /* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
new file mode 100644
index 0000000..b057c06
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -0,0 +1,43 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
new file mode 100644
index 0000000..893b874
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -0,0 +1,162 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+
+#define S3C2410_LCDREG(x) (x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
+#define S3C2410_LCDCON1_MMODE (1<<7)
+#define S3C2410_LCDCON1_DSCAN4 (0<<5)
+#define S3C2410_LCDCON1_STN4 (1<<5)
+#define S3C2410_LCDCON1_STN8 (2<<5)
+#define S3C2410_LCDCON1_TFT (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP (0<<1)
+#define S3C2410_LCDCON1_STN2GREY (1<<1)
+#define S3C2410_LCDCON1_STN4GREY (2<<1)
+#define S3C2410_LCDCON1_STN8BPP (3<<1)
+#define S3C2410_LCDCON1_STN12BPP (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP (13<<1)
+
+#define S3C2410_LCDCON1_ENVID (1)
+
+#define S3C2410_LCDCON1_MODEMASK 0x1E
+
+#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL (1<<12)
+#define S3C2410_LCDCON5_FRM565 (1<<11)
+#define S3C2410_LCDCON5_INVVCLK (1<<10)
+#define S3C2410_LCDCON5_INVVLINE (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME (1<<8)
+#define S3C2410_LCDCON5_INVVD (1<<7)
+#define S3C2410_LCDCON5_INVVDEN (1<<6)
+#define S3C2410_LCDCON5_INVPWREN (1<<5)
+#define S3C2410_LCDCON5_INVLEND (1<<4)
+#define S3C2410_LCDCON5_PWREN (1<<3)
+#define S3C2410_LCDCON5_ENLEND (1<<2)
+#define S3C2410_LCDCON5_BSWP (1<<1)
+#define S3C2410_LCDCON5_HWSWP (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x) ((x) << 21)
+#define S3C2410_LCDBASEU(x) (x)
+
+#define S3C2410_OFFSIZE(x) ((x) << 11)
+#define S3C2410_PAGEWIDTH(x) (x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN (1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL (1<<2)
+#define S3C2410_LCDINT_FRSYNC (1<<1)
+#define S3C2410_LCDINT_FICNT (1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND (0x00)
+#define S3C24XX_LCDSRCPND (0x04)
+#define S3C24XX_LCDINTMSK (0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
new file mode 100644
index 0000000..f9926ab
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -0,0 +1,220 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16 (1<<1)
+#define S3C2410_BWSCON_DW0_32 (2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8 (0<<4)
+#define S3C2410_BWSCON_DW1_16 (1<<4)
+#define S3C2410_BWSCON_DW1_32 (2<<4)
+#define S3C2410_BWSCON_WS1 (1<<6)
+#define S3C2410_BWSCON_ST1 (1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8 (0<<8)
+#define S3C2410_BWSCON_DW2_16 (1<<8)
+#define S3C2410_BWSCON_DW2_32 (2<<8)
+#define S3C2410_BWSCON_WS2 (1<<10)
+#define S3C2410_BWSCON_ST2 (1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8 (0<<12)
+#define S3C2410_BWSCON_DW3_16 (1<<12)
+#define S3C2410_BWSCON_DW3_32 (2<<12)
+#define S3C2410_BWSCON_WS3 (1<<14)
+#define S3C2410_BWSCON_ST3 (1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8 (0<<16)
+#define S3C2410_BWSCON_DW4_16 (1<<16)
+#define S3C2410_BWSCON_DW4_32 (2<<16)
+#define S3C2410_BWSCON_WS4 (1<<18)
+#define S3C2410_BWSCON_ST4 (1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8 (0<<20)
+#define S3C2410_BWSCON_DW5_16 (1<<20)
+#define S3C2410_BWSCON_DW5_32 (2<<20)
+#define S3C2410_BWSCON_WS5 (1<<22)
+#define S3C2410_BWSCON_ST5 (1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8 (0<<24)
+#define S3C2410_BWSCON_DW6_16 (1<<24)
+#define S3C2410_BWSCON_DW6_32 (2<<24)
+#define S3C2410_BWSCON_WS6 (1<<26)
+#define S3C2410_BWSCON_ST6 (1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8 (0<<28)
+#define S3C2410_BWSCON_DW7_16 (1<<28)
+#define S3C2410_BWSCON_DW7_32 (2<<28)
+#define S3C2410_BWSCON_WS7 (1<<30)
+#define S3C2410_BWSCON_ST7 (1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm (0x00)
+#define S3C2410_BANKCON_PMC4 (0x01)
+#define S3C2410_BANKCON_PMC8 (0x02)
+#define S3C2410_BANKCON_PMC16 (0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
+#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
+#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
+#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT (2)
+
+#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
+#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
+#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
+#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT (4)
+
+#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT (6)
+
+#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
+#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
+#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
+#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
+#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
+#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
+#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
+#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT (8)
+
+#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
+#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
+#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
+#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT (11)
+
+#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
+#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
+#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
+#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT (13)
+
+#define S3C2410_BANKCON_SRAM (0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
+#define S3C2410_BANKCON_SDRAM (0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
+#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
+#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
+#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
+#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
+
+#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN (1<<23)
+#define S3C2410_REFRESH_SELF (1<<22)
+#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK (3<<20)
+#define S3C2410_REFRESH_TRP_2clk (0<<20)
+#define S3C2410_REFRESH_TRP_3clk (1<<20)
+#define S3C2410_REFRESH_TRP_4clk (2<<20)
+
+#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK (3<<18)
+#define S3C2410_REFRESH_TSRC_4clk (0<<18)
+#define S3C2410_REFRESH_TSRC_5clk (1<<18)
+#define S3C2410_REFRESH_TSRC_6clk (2<<18)
+#define S3C2410_REFRESH_TSRC_7clk (3<<18)
+
+
+/* mode select register(s) */
+
+#define S3C2410_MRSRB_CL1 (0x00 << 4)
+#define S3C2410_MRSRB_CL2 (0x02 << 4)
+#define S3C2410_MRSRB_CL3 (0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M (0x2 << 0)
+#define S3C2410_BANKSIZE_64M (0x1 << 0)
+#define S3C2410_BANKSIZE_32M (0x0 << 0)
+#define S3C2410_BANKSIZE_16M (0x7 << 0)
+#define S3C2410_BANKSIZE_8M (0x6 << 0)
+#define S3C2410_BANKSIZE_4M (0x5 << 0)
+#define S3C2410_BANKSIZE_2M (0x4 << 0)
+#define S3C2410_BANKSIZE_MASK (0x7 << 0)
+#define S3C2400_BANKSIZE_MASK (0x4 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
+#define S3C2410_BANKSIZE_BURST (1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
new file mode 100644
index 0000000..2d36353
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
+#define S3C2412_PWRCFG_BATF_MASK (3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8)
+#define S3C2412_PWRCFG_NAND_NORST (1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
new file mode 100644
index 0000000..a4bf271
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2412_MEM
+#define __ASM_ARM_REGS_S3C2412_MEM
+
+#ifndef S3C2412_MEMREG
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
+#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
+#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08)
+#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C)
+
+#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
+#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
+
+#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
new file mode 100644
index 0000000..aa69dc7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
+ *
+ * Copyright 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_H
+#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
+
+#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET (0x533C2412)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif /* __ASM_ARCH_REGS_S3C2412_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
new file mode 100644
index 0000000..7dd4583
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -0,0 +1,195 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT 16
+#define S3C2443_PLLCON_PDIVSHIFT 8
+#define S3C2443_PLLCON_SDIVSHIFT 0
+#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK (3)
+
+#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET (0x533c2443)
+
+#define S3C2443_PLLCON_OFF (1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT (1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
+#define S3C2443_CLKSRC_I2S_MASK (3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
+
+#define S3C2443_CLKDIV0_DVS (1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
+#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0 (1<<0)
+#define S3C2443_HCLKCON_DMA1 (1<<1)
+#define S3C2443_HCLKCON_DMA2 (1<<2)
+#define S3C2443_HCLKCON_DMA3 (1<<3)
+#define S3C2443_HCLKCON_DMA4 (1<<4)
+#define S3C2443_HCLKCON_DMA5 (1<<5)
+#define S3C2443_HCLKCON_CAMIF (1<<8)
+#define S3C2443_HCLKCON_DISP (1<<9)
+#define S3C2443_HCLKCON_LCDC (1<<10)
+#define S3C2443_HCLKCON_USBH (1<<11)
+#define S3C2443_HCLKCON_USBD (1<<12)
+#define S3C2443_HCLKCON_HSMMC (1<<16)
+#define S3C2443_HCLKCON_CFC (1<<17)
+#define S3C2443_HCLKCON_SSMC (1<<18)
+#define S3C2443_HCLKCON_DRAMC (1<<19)
+
+#define S3C2443_PCLKCON_UART0 (1<<0)
+#define S3C2443_PCLKCON_UART1 (1<<1)
+#define S3C2443_PCLKCON_UART2 (1<<2)
+#define S3C2443_PCLKCON_UART3 (1<<3)
+#define S3C2443_PCLKCON_IIC (1<<4)
+#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_AC97 (1<<8)
+#define S3C2443_PCLKCON_IIS (1<<9)
+#define S3C2443_PCLKCON_PWMT (1<<10)
+#define S3C2443_PCLKCON_WDT (1<<11)
+#define S3C2443_PCLKCON_RTC (1<<12)
+#define S3C2443_PCLKCON_GPIO (1<<13)
+#define S3C2443_PCLKCON_SPI0 (1<<14)
+#define S3C2443_PCLKCON_SPI1 (1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK (1<<16)
+#define S3C2443_SCLKCON_SSMCCLK (1<<15)
+#define S3C2443_SCLKCON_HSSPICLK (1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
+#define S3C2443_SCLKCON_CAMCLK (1<<11)
+#define S3C2443_SCLKCON_DISPCLK (1<<10)
+#define S3C2443_SCLKCON_I2SCLK (1<<9)
+#define S3C2443_SCLKCON_UARTCLK (1<<8)
+#define S3C2443_SCLKCON_USBHOST (1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+ do_div(fvco, pdiv << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
new file mode 100644
index 0000000..cbf2d88
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -0,0 +1,127 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1<<8)
+#define S3C2440_SDICON_MMCCLOCK (1<<5)
+#define S3C2410_SDICON_BYTEORDER (1<<4)
+#define S3C2410_SDICON_SDIOIRQ (1<<3)
+#define S3C2410_SDICON_RWAITEN (1<<2)
+#define S3C2410_SDICON_FIFORESET (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART (1<<8)
+#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX (0xff)
+
+#define S3C2440_SDIDCON_DS_BYTE (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
+#define S3C2440_SDIDCON_DS_WORD (2<<22)
+#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS (1<<16)
+#define S3C2410_SDIDCON_DMAEN (1<<15)
+#define S3C2410_SDIDCON_STOP (1<<14)
+#define S3C2440_SDIDCON_DATSTART (1<<14)
+#define S3C2410_SDIDCON_DATMODE (3<<12)
+#define S3C2410_SDIDCON_BLKNUM (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON (1<<0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
+#define S3C2410_SDIFSTA_TFDET (1<<13)
+#define S3C2410_SDIFSTA_RFDET (1<<12)
+#define S3C2410_SDIFSTA_TFHALF (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
+#define S3C2410_SDIFSTA_RFLAST (1<<9)
+#define S3C2410_SDIFSTA_RFFULL (1<<8)
+#define S3C2410_SDIFSTA_RFHALF (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
+#define S3C2410_SDIIMSK_READWAIT (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
+#define S3C2410_SDIIMSK_DATACRC (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
new file mode 100644
index 0000000..f8c9387
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-s3c2410/include/mach/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
new file mode 100644
index 0000000..3fe8be9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info {
+ unsigned long pin_clk;
+ unsigned long pin_mosi;
+ unsigned long pin_miso;
+
+ int bus_num;
+
+ void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
new file mode 100644
index 0000000..921b13b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info {
+ unsigned long pin_cs; /* simple gpio cs */
+ unsigned int num_cs; /* total chipselects */
+ int bus_num; /* bus number to use. */
+
+ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
new file mode 100644
index 0000000..ec2defe
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c/regs-watchdog.h>
+#include <mach/regs-clock.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+extern void (*s3c24xx_reset_hook)(void);
+
+static void
+arch_reset(char mode)
+{
+ struct clk *wdtclk;
+
+ if (mode == 's') {
+ cpu_reset(0);
+ }
+
+ if (s3c24xx_reset_hook)
+ s3c24xx_reset_hook();
+
+ printk("arch_reset: attempting watchdog reset\n");
+
+ __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+
+ wdtclk = clk_get(NULL, "watchdog");
+ if (!IS_ERR(wdtclk)) {
+ clk_enable(wdtclk);
+ } else
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+ /* put initial values into count and data */
+ __raw_writel(0x80, S3C2410_WTCNT);
+ __raw_writel(0x80, S3C2410_WTDAT);
+
+ /* set the watchdog to go and reset... */
+ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+ S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
+ /* we'll take a jump through zero as a poor second */
+ cpu_reset(0);
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
new file mode 100644
index 0000000..e9f676b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -0,0 +1,58 @@
+/* arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
+
+#include <mach/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
+
+void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++) {
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+ }
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
+static void arch_idle(void)
+{
+ if (s3c24xx_idle != NULL)
+ (s3c24xx_idle)();
+ else
+ s3c24xx_default_idle();
+}
+
+#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 0000000..2a425ed
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
new file mode 100644
index 0000000..708e474
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * Copyright (c) 2003, 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+
+#include <asm/plat-s3c/uncompress.h>
+
+static inline int is_arm926(void)
+{
+ unsigned int cpuid;
+
+ asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
+
+ return ((cpuid & 0xff0) == 0x260);
+}
+
+static void arch_detect_cpu(void)
+{
+ unsigned int cpuid;
+
+ cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+ cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+ if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
+ cpuid == S3C2410_GSTATUS1_2442) {
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+ } else {
+ fifo_mask = S3C2410_UFSTAT_TXMASK;
+ fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
+ }
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
new file mode 100644
index 0000000..cd91d15
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -0,0 +1,41 @@
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+
+#define S3C_HCDFLG_USED (1)
+
+struct s3c2410_hcd_port {
+ unsigned char flags;
+ unsigned char power;
+ unsigned char oc_status;
+ unsigned char oc_changed;
+};
+
+struct s3c2410_hcd_info {
+ struct usb_hcd *hcd;
+ struct s3c2410_hcd_port port[2];
+
+ void (*power_control)(int port, int to);
+ void (*enable_oc)(struct s3c2410_hcd_info *, int on);
+ void (*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+ if (info->report_oc != NULL) {
+ (info->report_oc)(info, ports);
+ }
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 0000000..315b007
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
new file mode 100644
index 0000000..e411991
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
new file mode 100644
index 0000000..f53f85b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC IRQ_EINT19
+#define IRQ_IDE0 IRQ_EINT16
+#define IRQ_IDE1 IRQ_EINT17
+#define IRQ_VR1000_SERIAL IRQ_EINT12
+#define IRQ_VR1000_DM9000A IRQ_EINT10
+#define IRQ_VR1000_DM9000N IRQ_EINT9
+#define IRQ_SMALERT IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
new file mode 100644
index 0000000..99612fc
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -0,0 +1,110 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <mach/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI (0x02000000)
+#define VR1000_PA_IDEPRIAUX (0x02800000)
+#define VR1000_PA_IDESEC (0x03000000)
+#define VR1000_PA_IDESECAUX (0x03800000)
+#define VR1000_PA_DM9000 (0x05000000)
+
+#define VR1000_PA_SERIAL (0x11800000)
+#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 2d72496e..f0de3c2 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 9c76df6..fb1e78e 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index f658b84..e35933a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
#include <asm/plat-s3c24xx/udc.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index cbc7956a..80fe2ed 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
#include <linux/serial_core.h>
#include <linux/timer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 3b5dc6e..606ee15 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 012dc14..7d34844 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
#include <asm/plat-s3c24xx/common-smdk.h>
#include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 849ebe9..c904008 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -42,7 +42,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d7646a9..ec87306 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a3f60cd..12cbca6 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b..b2ae237 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,9 +26,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
static void simtec_nor_vpp(struct map_info *map, int vpp)
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index cb87c94..c93bf2d 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
.text
.global h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index b908727..ba43ff9 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
#include <linux/time.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 54d4b79..5d977f9 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c/regs-serial.h>
#include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 1597fcf..be37f22 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
#include <asm/plat-s3c/regs-serial.h>
/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 28942e0..4dacf8a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index b1552b2..af4b2ce 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd8649..22fc04a 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
#include <linux/serial_core.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 4f86693..f7afece 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
{
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 0230b2f..ac62b79 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f59247..30f613a 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -37,12 +37,12 @@
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c/iic.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index d7d0e95..80affb1 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/io.h>
@@ -33,12 +33,12 @@
//#include <asm/debug-ll.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
#include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index d7087d0..7a08b37 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
#include <asm/plat-s3c/nand.h>
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index a71d6c6..737523a 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
#include <linux/sysdev.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5ce001b5..d278010 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
#include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index 609312b..c82418e 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
.text
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 9ef4efd..95567e6 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
#include <linux/mutex.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b12608..cdd4e6e 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
#include <linux/serial_core.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include <asm/plat-s3c24xx/dma.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index e7f1ca1..c0c6743 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 457255d..276b823 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index f53eba7..265c77d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 48e8fb6..f0f0cc6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 0f4437b..1a5e702 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
#include <asm/mach/irq.h>
#include <asm/setup.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-serial.h>
#include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c4008d5..d2ee0cd 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 569f00b..e0b07e6 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
#include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 52deb5a..327c8f3 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 19f06c3..d6b9a92 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index ad2e8a9..569b5c3 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
#include <linux/mutex.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 04d248a..6a8d7cc 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
#include <asm/plat-s3c24xx/s3c2443.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d..c1ff03a 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
#include <linux/serial_core.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 499cddb..9674de7 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 5a6d333..e3c0d58 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 3e9f923..37793f9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
#include <asm/plat-s3c24xx/s3c2443.h>
#include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d219845..55e6447 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
#include <linux/delay.h>
#include <linux/mm.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -34,8 +34,8 @@
#include <asm/mach/irda.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index d087c3b..3efefbd 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
#include <asm/hardware/sa1111.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index cfb65eb..fd3ad9c 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -28,8 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dbd1aaa..43c30f8 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/*
* Very simple clock implementation - we only have one clock to
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 4089363..fe28999 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index daa9d57..b1161fc 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,10 +24,10 @@
#include <linux/platform_device.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/scoop.h>
#include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/sharpsl_pm.h>
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 61df76f..da3a898 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index a471f9f..39d38c8 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -26,7 +26,7 @@
#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 65d96ee..f990a3e 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
@@ -76,7 +76,7 @@
* address of the hardware registers for that channel as the channel
* identifier. This identifier is written to the location pointed by
* @dma_regs. The list of possible values for @device are listed into
- * linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
*
* Note that reading from a port and writing to the same port are
* actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e616130..5a08fe2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
#include <asm/div64.h>
#include <asm/cnt32_to_63.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 184b04c..0d3829a 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <asm/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "generic.h"
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8c560ae..af25a78 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
#include <linux/serial_core.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -41,14 +41,14 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
#endif
#ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
#endif
#include "generic.h"
@@ -681,7 +681,7 @@
#define MAX_ASIC_ISR_LOOPS 20
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
static u32 kpio_irq_mask[] = {
KPIO_KEY_ALL,
KPIO_SPI_INT,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 270feb0..e7056c0 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/SA-1100.h
rename to arch/arm/mach-sa1100/include/mach/SA-1100.h
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 0000000..5d2ad7d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+# define LANGUAGE Assembly
+# else
+# define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd) (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C 0
+#define Assembly 1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0 0x00000000
+#define __SYSTEM_CONTROL1 0x00000400
+#define __ARBITER 0x00020000
+#define __SYSTEM_CONTROL2 0x00040000
+#define __SYSTEM_CONTROL3 0x00060000
+#define __PARALLEL_PORT 0x00080000
+#define __VIDMEM_CONTROL 0x00100000
+#define __UPDATE_FIFO 0x00120000
+#define __SHMEM_CONTROL1 0x00140000
+#define __INTERRUPT_CONTROL 0x00160000
+#define __USB_CONTROL 0x00180000
+#define __TRACK_INTERFACE 0x001a0000
+#define __MOUSE_INTERFACE 0x001b0000
+#define __KEYPAD_INTERFACE 0x001c0000
+#define __PCMCIA_INTERFACE 0x001e0000
+#define __VGA_CONTROL 0x00200000
+#define __GPIO_INTERFACE 0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x ) ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ * SKCR SA-1101 control register (read/write)
+ * SMCR Shared Memory Controller Register
+ * SNPR Snoop Register
+ */
+
+#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
+#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
+#define SKCR_Sleep 0x0004 /* Sleep Mode */
+#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
+#define SKCR_VCOON 0x0010 /* VCO bias */
+#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
+#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
+
+#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
+#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
+#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
+#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
+ (( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
+ (( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
+#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
+#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
+#define SNPR_BankSelect Fld(2,27) /* Bank select */
+#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
+ ( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
+ (( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ * VMCCR Configuration register
+ * VMCAR VMC address register
+ * VMCDR VMC data register
+ *
+ */
+
+#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
+#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
+#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
+#define VMCCR_Config 0x0001 /* DRAM size */
+#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
+#define VMCCR_RefTest (1<<10) /* refresh test */
+#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
+#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
+#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
+#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ * UFCR Update FIFO Control Register
+ * UFSR Update FIFO Status Register
+ * UFLVLR update FIFO level register
+ * UFDR update FIFO data register
+ */
+
+#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
+#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
+#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
+#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
+#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ * SKPCR Power Control Register
+ * SKCDR Clock Divider Register
+ * DACDR1 DAC1 Data register
+ * DACDR2 DAC2 Data register
+ */
+
+#define _SKPCR _SA1101(0x00000400)
+#define _SKCDR _SA1101(0x00040000)
+#define _DACDR1 _SA1101(0x00060000)
+#define _DACDR2 _SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn 0x01 /* USB Enable */
+#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
+#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
+#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
+#define SKPCR_DCLKEn 0x20 /* DACs Enable */
+#define SKPCR_nKPADEn 0x40 /* Multiplexer */
+
+#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
+#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
+#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
+#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
+#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
+#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
+#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
+#define SKDCR_ChargePump (1<<25) /* Charge pump control */
+#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
+#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
+#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
+
+#define DACDR_DACCount Fld(8,0) /* Count value */
+#define DACDR1_DACCount DACDR_DACCount
+#define DACDR2_DACCount DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ * IEEE_Config IEEE mode selection and programmable attributes
+ * IEEE_Control Controls the states of IEEE port control outputs
+ * IEEE_Data Forward transfer data register
+ * IEEE_Addr Forward transfer address register
+ * IEEE_Status Port IO signal status register
+ * IEEE_IntStatus Port interrupts status register
+ * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
+ * IEEE_InitTime Forward timeout counter initial value
+ * IEEE_TimerStatus Forward timeout counter current value
+ * IEEE_FifoReset Reset forward transfer FIFO
+ * IEEE_ReloadValue Counter reload value
+ * IEEE_TestControl Control testmode
+ * IEEE_TestDataIn Test data register
+ * IEEE_TestDataInEn Enable test data
+ * IEEE_TestCtrlIn Test control signals
+ * IEEE_TestCtrlInEn Enable test control signals
+ * IEEE_TestDataStat Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address
+ */
+
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config _IEEE( 0x0000 )
+#define _IEEE_Control _IEEE( 0x0400 )
+#define _IEEE_Data _IEEE( 0x4000 )
+#define _IEEE_Addr _IEEE( 0x0800 )
+#define _IEEE_Status _IEEE( 0x0c00 )
+#define _IEEE_IntStatus _IEEE( 0x1000 )
+#define _IEEE_FifoLevels _IEEE( 0x1400 )
+#define _IEEE_InitTime _IEEE( 0x1800 )
+#define _IEEE_TimerStatus _IEEE( 0x1c00 )
+#define _IEEE_FifoReset _IEEE( 0x2000 )
+#define _IEEE_ReloadValue _IEEE( 0x3c00 )
+#define _IEEE_TestControl _IEEE( 0x2400 )
+#define _IEEE_TestDataIn _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
+#define _IEEE_TestDataStat _IEEE( 0x3800 )
+
+
+#if LANGUAGE == C
+#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M Fld(3,0) /* Mode select */
+#define IEEE_Config_D 0x04 /* FIFO access enable */
+#define IEEE_Config_B 0x08 /* 9-bit word enable */
+#define IEEE_Config_T 0x10 /* Data transfer enable */
+#define IEEE_Config_A 0x20 /* Data transfer direction */
+#define IEEE_Config_E 0x40 /* Timer enable */
+#define IEEE_Control_A 0x08 /* AutoFd output */
+#define IEEE_Control_E 0x04 /* Selectin output */
+#define IEEE_Control_T 0x02 /* Strobe output */
+#define IEEE_Control_I 0x01 /* Port init output */
+#define IEEE_Data_C (1<<31) /* Byte count */
+#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
+#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
+#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
+#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
+#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
+#define IEEE_Status_T 0x0040 /* nStrobe port output status */
+#define IEEE_Status_I 0x0020 /* nInit port output status */
+#define IEEE_Status_B 0x0010 /* Busy port inout status */
+#define IEEE_Status_S 0x0008 /* Select port input status */
+#define IEEE_Status_K 0x0004 /* nAck port input status */
+#define IEEE_Status_F 0x0002 /* nFault port input status */
+#define IEEE_Status_R 0x0001 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat 0x0100
+#define IEEE_IntStatus_IntReqEmp 0x0080
+#define IEEE_IntStatus_IntReqInt 0x0040
+#define IEEE_IntStatus_IntReqRav 0x0020
+#define IEEE_IntStatus_IntReqTim 0x0010
+#define IEEE_IntStatus_RevAddrComp 0x0008
+#define IEEE_IntStatus_RevDataComp 0x0004
+#define IEEE_IntStatus_FwdAddrComp 0x0002
+#define IEEE_IntStatus_FwdDataComp 0x0001
+#define IEEE_FifoLevels_RevFifoLevel 2
+#define IEEE_FifoLevels_FwdFifoLevel 1
+#define IEEE_InitTime_TimValInit Fld(22,0)
+#define IEEE_TimerStatus_TimValStat Fld(22,0)
+#define IEEE_ReloadValue_Reload Fld(4,0)
+
+#define IEEE_TestControl_RegClk 0x04
+#define IEEE_TestControl_ClockSelect Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError 0x10
+#define IEEE_TestCtrlIn_nFault 0x08
+#define IEEE_TestCtrlIn_nAck 0x04
+#define IEEE_TestCtrlIn_PSel 0x02
+#define IEEE_TestCtrlIn_Busy 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ * VideoControl Video Control Register
+ * VgaTiming0 VGA Timing Register 0
+ * VgaTiming1 VGA Timing Register 1
+ * VgaTiming2 VGA Timing Register 2
+ * VgaTiming3 VGA Timing Register 3
+ * VgaBorder VGA Border Color Register
+ * VgaDBAR VGADMA Base Address Register
+ * VgaDCAR VGADMA Channel Current Address Register
+ * VgaStatus VGA Status Register
+ * VgaInterruptMask VGA Interrupt Mask Register
+ * VgaPalette VGA Palette Registers
+ * DacControl DAC Control Register
+ * VgaTest VGA Controller Test Register
+ */
+
+#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl _VGA( 0x0000 )
+#define _VgaTiming0 _VGA( 0x0400 )
+#define _VgaTiming1 _VGA( 0x0800 )
+#define _VgaTiming2 _VGA( 0x0c00 )
+#define _VgaTiming3 _VGA( 0x1000 )
+#define _VgaBorder _VGA( 0x1400 )
+#define _VgaDBAR _VGA( 0x1800 )
+#define _VgaDCAR _VGA( 0x1c00 )
+#define _VgaStatus _VGA( 0x2000 )
+#define _VgaInterruptMask _VGA( 0x2400 )
+#define _VgaPalette _VGA( 0x40000 )
+#define _DacControl _VGA( 0x3000 )
+#define _VgaTest _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn 0x00000000
+#define VideoControl_BGR 0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq Fld(4,4)
+#define VideoControl_VBurstL Fld(4,8)
+#define VideoControl_VMode (1<<12)
+#define VideoControl_PalRead (1<<13)
+
+#define VgaTiming0_PPL Fld(6,2)
+#define VgaTiming0_HSW Fld(8,8)
+#define VgaTiming0_HFP Fld(8,16)
+#define VgaTiming0_HBP Fld(8,24)
+
+#define VgaTiming1_LPS Fld(10,0)
+#define VgaTiming1_VSW Fld(6,10)
+#define VgaTiming1_VFP Fld(8,16)
+#define VgaTiming1_VBP Fld(8,24)
+
+#define VgaTiming2_IVS 0x01
+#define VgaTiming2_IHS 0x02
+#define VgaTiming2_CVS 0x04
+#define VgaTiming2_CHS 0x08
+
+#define VgaTiming3_HBS Fld(8,0)
+#define VgaTiming3_HBE Fld(8,8)
+#define VgaTiming3_VBS Fld(8,16)
+#define VgaTiming3_VBE Fld(8,24)
+
+#define VgaBorder_BCOL Fld(24,0)
+
+#define VgaStatus_VFUF 0x01
+#define VgaStatus_VNext 0x02
+#define VgaStatus_VComp 0x04
+
+#define VgaInterruptMask_VFUFMask 0x00
+#define VgaInterruptMask_VNextMask 0x01
+#define VgaInterruptMask_VCompMask 0x02
+
+#define VgaPalette_R Fld(8,0)
+#define VgaPalette_G Fld(8,8)
+#define VgaPalette_B Fld(8,16)
+
+#define DacControl_DACON 0x0001
+#define DacControl_COMPON 0x0002
+#define DacControl_PEDON 0x0004
+#define DacControl_RTrim Fld(5,4)
+#define DacControl_GTrim Fld(5,9)
+#define DacControl_BTrim Fld(5,14)
+
+#define VgaTest_TDAC 0x00
+#define VgaTest_Datatest Fld(4,1)
+#define VgaTest_DACTESTDAC 0x10
+#define VgaTest_DACTESTOUT Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ * Revision
+ * Control
+ * CommandStatus
+ * InterruptStatus
+ * InterruptEnable
+ * HCCA
+ * PeriodCurrentED
+ * ControlHeadED
+ * BulkHeadED
+ * BulkCurrentED
+ * DoneHead
+ * FmInterval
+ * FmRemaining
+ * FmNumber
+ * PeriodicStart
+ * LSThreshold
+ * RhDescriptorA
+ * RhDescriptorB
+ * RhStatus
+ * RhPortStatus
+ * USBStatus
+ * USBReset
+ * USTAR
+ * USWER
+ * USRFR
+ * USNFR
+ * USTCSR
+ * USSR
+ *
+ */
+
+#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision _USB( 0x0000 )
+#define _Control _USB( 0x0888 )
+#define _CommandStatus _USB( 0x0c00 )
+#define _InterruptStatus _USB( 0x1000 )
+#define _InterruptEnable _USB( 0x1400 )
+#define _HCCA _USB( 0x1800 )
+#define _PeriodCurrentED _USB( 0x1c00 )
+#define _ControlHeadED _USB( 0x2000 )
+#define _BulkHeadED _USB( 0x2800 )
+#define _BulkCurrentED _USB( 0x2c00 )
+#define _DoneHead _USB( 0x3000 )
+#define _FmInterval _USB( 0x3400 )
+#define _FmRemaining _USB( 0x3800 )
+#define _FmNumber _USB( 0x3c00 )
+#define _PeriodicStart _USB( 0x4000 )
+#define _LSThreshold _USB( 0x4400 )
+#define _RhDescriptorA _USB( 0x4800 )
+#define _RhDescriptorB _USB( 0x4c00 )
+#define _RhStatus _USB( 0x5000 )
+#define _RhPortStatus _USB( 0x5400 )
+#define _USBStatus _USB( 0x11800 )
+#define _USBReset _USB( 0x11c00 )
+
+#define _USTAR _USB( 0x10400 )
+#define _USWER _USB( 0x10800 )
+#define _USRFR _USB( 0x10c00 )
+#define _USNFR _USB( 0x11000 )
+#define _USTCSR _USB( 0x11400 )
+#define _USSR _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control (*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp (1<<7)
+#define USBStatus_IrqHciBuffAcc (1<<8)
+#define USBStatus_nIrqHciM (1<<9)
+#define USBStatus_nHciMFClr (1<<10)
+
+#define USBReset_ForceIfReset 0x01
+#define USBReset_ForceHcReset 0x02
+#define USBReset_ClkGenReset 0x04
+
+#define USTCR_RdBstCntrl Fld(3,0)
+#define USTCR_ByteEnable Fld(4,3)
+#define USTCR_WriteEn (1<<7)
+#define USTCR_FifoCir (1<<8)
+#define USTCR_TestXferSel (1<<9)
+#define USTCR_FifoCirAtEnd (1<<10)
+#define USTCR_nSimScaleDownClk (1<<11)
+
+#define USSR_nAppMDEmpty 0x01
+#define USSR_nAppMDFirst 0x02
+#define USSR_nAppMDLast 0x04
+#define USSR_nAppMDFull 0x08
+#define USSR_nAppMAFull 0x10
+#define USSR_XferReq 0x20
+#define USSR_XferEnd 0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ * INTTEST0 Test register 0
+ * INTTEST1 Test register 1
+ * INTENABLE0 Interrupt Enable register 0
+ * INTENABLE1 Interrupt Enable register 1
+ * INTPOL0 Interrupt Polarity selection 0
+ * INTPOL1 Interrupt Polarity selection 1
+ * INTTSTSEL Interrupt source selection
+ * INTSTATCLR0 Interrupt Status 0
+ * INTSTATCLR1 Interrupt Status 1
+ * INTSET0 Interrupt Set 0
+ * INTSET1 Interrupt Set 1
+ */
+
+#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0 _INT( 0x1000 )
+#define _INTTEST1 _INT( 0x1400 )
+#define _INTENABLE0 _INT( 0x2000 )
+#define _INTENABLE1 _INT( 0x2400 )
+#define _INTPOL0 _INT( 0x3000 )
+#define _INTPOL1 _INT( 0x3400 )
+#define _INTTSTSEL _INT( 0x5000 )
+#define _INTSTATCLR0 _INT( 0x6000 )
+#define _INTSTATCLR1 _INT( 0x6400 )
+#define _INTSET0 _INT( 0x7000 )
+#define _INTSET1 _INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers (prefix kbd applies to trackpad interface, mse to mouse)
+ * KBDCR Control Register
+ * KBDSTAT Status Register
+ * KBDDATA Transmit/Receive Data register
+ * KBDCLKDIV Clock Division Register
+ * KBDPRECNT Clock Precount Register
+ * KBDTEST1 Test register 1
+ * KBDTEST2 Test register 2
+ * KBDTEST3 Test register 3
+ * KBDTEST4 Test register 4
+ * MSECR
+ * MSESTAT
+ * MSEDATA
+ * MSECLKDIV
+ * MSEPRECNT
+ * MSETEST1
+ * MSETEST2
+ * MSETEST3
+ * MSETEST4
+ *
+ */
+
+#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR _KBD( 0x0000 )
+#define _KBDSTAT _KBD( 0x0400 )
+#define _KBDDATA _KBD( 0x0800 )
+#define _KBDCLKDIV _KBD( 0x0c00 )
+#define _KBDPRECNT _KBD( 0x1000 )
+#define _KBDTEST1 _KBD( 0x2000 )
+#define _KBDTEST2 _KBD( 0x2400 )
+#define _KBDTEST3 _KBD( 0x2800 )
+#define _KBDTEST4 _KBD( 0x2c00 )
+#define _MSECR _MSE( 0x0000 )
+#define _MSESTAT _MSE( 0x0400 )
+#define _MSEDATA _MSE( 0x0800 )
+#define _MSECLKDIV _MSE( 0x0c00 )
+#define _MSEPRECNT _MSE( 0x1000 )
+#define _MSETEST1 _MSE( 0x2000 )
+#define _MSETEST2 _MSE( 0x2400 )
+#define _MSETEST3 _MSE( 0x2800 )
+#define _MSETEST4 _MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA 0x08
+#define KBDCR_FKD 0x02
+#define KBDCR_FKC 0x01
+
+#define KBDSTAT_TXE 0x80
+#define KBDSTAT_TXB 0x40
+#define KBDSTAT_RXF 0x20
+#define KBDSTAT_RXB 0x10
+#define KBDSTAT_ENA 0x08
+#define KBDSTAT_RXP 0x04
+#define KBDSTAT_KBD 0x02
+#define KBDSTAT_KBC 0x01
+
+#define KBDCLKDIV_DivVal Fld(4,0)
+
+#define MSECR_ENA 0x08
+#define MSECR_FKD 0x02
+#define MSECR_FKC 0x01
+
+#define MSESTAT_TXE 0x80
+#define MSESTAT_TXB 0x40
+#define MSESTAT_RXF 0x20
+#define MSESTAT_RXB 0x10
+#define MSESTAT_ENA 0x08
+#define MSESTAT_RXP 0x04
+#define MSESTAT_MSD 0x02
+#define MSESTAT_MSC 0x01
+
+#define MSECLKDIV_DivVal Fld(4,0)
+
+#define KBDTEST1_CD 0x80
+#define KBDTEST1_RC1 0x40
+#define KBDTEST1_MC 0x20
+#define KBDTEST1_C Fld(2,3)
+#define KBDTEST1_T2 0x40
+#define KBDTEST1_T1 0x20
+#define KBDTEST1_T0 0x10
+#define KBDTEST2_TICBnRES 0x08
+#define KBDTEST2_RKC 0x04
+#define KBDTEST2_RKD 0x02
+#define KBDTEST2_SEL 0x01
+#define KBDTEST3_ms_16 0x80
+#define KBDTEST3_us_64 0x40
+#define KBDTEST3_us_16 0x20
+#define KBDTEST3_DIV8 0x10
+#define KBDTEST3_DIn 0x08
+#define KBDTEST3_CIn 0x04
+#define KBDTEST3_KD 0x02
+#define KBDTEST3_KC 0x01
+#define KBDTEST4_BC12 0x80
+#define KBDTEST4_BC11 0x40
+#define KBDTEST4_TRES 0x20
+#define KBDTEST4_CLKOE 0x10
+#define KBDTEST4_CRES 0x08
+#define KBDTEST4_RXB 0x04
+#define KBDTEST4_TXB 0x02
+#define KBDTEST4_SRX 0x01
+
+#define MSETEST1_CD 0x80
+#define MSETEST1_RC1 0x40
+#define MSETEST1_MC 0x20
+#define MSETEST1_C Fld(2,3)
+#define MSETEST1_T2 0x40
+#define MSETEST1_T1 0x20
+#define MSETEST1_T0 0x10
+#define MSETEST2_TICBnRES 0x08
+#define MSETEST2_RKC 0x04
+#define MSETEST2_RKD 0x02
+#define MSETEST2_SEL 0x01
+#define MSETEST3_ms_16 0x80
+#define MSETEST3_us_64 0x40
+#define MSETEST3_us_16 0x20
+#define MSETEST3_DIV8 0x10
+#define MSETEST3_DIn 0x08
+#define MSETEST3_CIn 0x04
+#define MSETEST3_KD 0x02
+#define MSETEST3_KC 0x01
+#define MSETEST4_BC12 0x80
+#define MSETEST4_BC11 0x40
+#define MSETEST4_TRES 0x20
+#define MSETEST4_CLKOE 0x10
+#define MSETEST4_CRES 0x08
+#define MSETEST4_RXB 0x04
+#define MSETEST4_TXB 0x02
+#define MSETEST4_SRX 0x01
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ * PADWR Port A Data Write Register
+ * PBDWR Port B Data Write Register
+ * PADRR Port A Data Read Register
+ * PBDRR Port B Data Read Register
+ * PADDR Port A Data Direction Register
+ * PBDDR Port B Data Direction Register
+ * PASSR Port A Sleep State Register
+ * PBSSR Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR _PIO( 0x0000 )
+#define _PBDWR _PIO( 0x0400 )
+#define _PADRR _PIO( 0x0000 )
+#define _PBDRR _PIO( 0x0400 )
+#define _PADDR _PIO( 0x0800 )
+#define _PBDDR _PIO( 0x0c00 )
+#define _PASSR _PIO( 0x1000 )
+#define _PBSSR _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ * PXDWR
+ * PXDRR
+ * PYDWR
+ * PYDRR
+ *
+ */
+
+#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
+
+#define _PXDWR _KEYPAD( 0x0000 )
+#define _PXDRR _KEYPAD( 0x0000 )
+#define _PYDWR _KEYPAD( 0x0400 )
+#define _PYDRR _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ * PCSR Status Register
+ * PCCR Control Register
+ * PCSSR Sleep State Register
+ *
+ */
+
+#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR _CARD( 0x0000 )
+#define _PCCR _CARD( 0x0400 )
+#define _PCSSR _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready 0x0001
+#define PCSR_S1_ready 0x0002
+#define PCSR_S0_detected 0x0004
+#define PCSR_S1_detected 0x0008
+#define PCSR_S0_VS1 0x0010
+#define PCSR_S0_VS2 0x0020
+#define PCSR_S1_VS1 0x0040
+#define PCSR_S1_VS2 0x0080
+#define PCSR_S0_WP 0x0100
+#define PCSR_S1_WP 0x0200
+#define PCSR_S0_BVD1_nSTSCHG 0x0400
+#define PCSR_S0_BVD2_nSPKR 0x0800
+#define PCSR_S1_BVD1_nSTSCHG 0x1000
+#define PCSR_S1_BVD2_nSPKR 0x2000
+
+#define PCCR_S0_VPP0 0x0001
+#define PCCR_S0_VPP1 0x0002
+#define PCCR_S0_VCC0 0x0004
+#define PCCR_S0_VCC1 0x0008
+#define PCCR_S1_VPP0 0x0010
+#define PCCR_S1_VPP1 0x0020
+#define PCCR_S1_VCC0 0x0040
+#define PCCR_S1_VCC1 0x0080
+#define PCCR_S0_reset 0x0100
+#define PCCR_S1_reset 0x0200
+#define PCCR_S0_float 0x0400
+#define PCCR_S1_float 0x0800
+
+#define PCSSR_S0_VCC0 0x0001
+#define PCSSR_S0_VCC1 0x0002
+#define PCSSR_S0_VPP0 0x0004
+#define PCSSR_S0_VPP1 0x0008
+#define PCSSR_S0_control 0x0010
+#define PCSSR_S1_VCC0 0x0020
+#define PCSSR_S1_VCC1 0x0040
+#define PCSSR_S1_VPP0 0x0080
+#define PCSSR_S1_VPP1 0x0100
+#define PCSSR_S1_control 0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/SA-1111.h
rename to arch/arm/mach-sa1100/include/mach/SA-1111.h
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 0000000..3959b20
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */
+#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT -1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset() (0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE 0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */
+#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */
+#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */
+#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */
+#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */
+#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */
+#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y) do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE 0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID (1 << 24)
+#define ASSABET_BSR_COM_DCD (1 << 25)
+#define ASSABET_BSR_COM_CTS (1 << 26)
+#define ASSABET_BSR_COM_DSR (1 << 27)
+#define ASSABET_BSR_RAD_CTS (1 << 28)
+#define ASSABET_BSR_RAD_DSR (1 << 29)
+#define ASSABET_BSR_RAD_DCD (1 << 30)
+#define ASSABET_BSR_RAD_RI (1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
+#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
+#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
+#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
+#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
+#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
+#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
+#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 0000000..44d2e1b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ * Tim Connors <connors@hpl.hp.com>
+ * Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE (0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */
+#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */
+#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */
+#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0 (1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1 (1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n))
+#define BADGE4_5V_USB (1<<2)
+#define BADGE4_5V_INITIALLY (1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
similarity index 100%
copy from include/asm-arm/arch-pxa/bitfield.h
copy to arch/arm/mach-sa1100/include/mach/bitfield.h
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 0000000..c3ac3d0
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO 0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 0000000..69e9624
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ * 04-06-2001 Lineo Japan, Inc.
+ * 04-16-2001 SHARP Corporation
+ * 07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+
+#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+ COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+ COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
+#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
+#define COLLIE_GPIO_CO GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
+#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
+#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
+#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
+#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
+#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
+#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
+#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
+#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
+#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
+#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+ UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 0000000..1f0634d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical base address
+ movne \rx, #0xf8000000 @ virtual address
+
+ @ We probe for the active serial port here, coherently with
+ @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+ @ We assume r1 can be clobbered.
+
+ @ see if Ser3 is active
+ add \rx, \rx, #0x00050000
+ ldr r1, [\rx, #UTCR3]
+ tst r1, #UTCR3_TXE
+
+ @ if Ser3 is inactive, then try Ser1
+ addeq \rx, \rx, #(0x00010000 - 0x00050000)
+ ldreq r1, [\rx, #UTCR3]
+ tsteq r1, #UTCR3_TXE
+
+ @ if Ser1 is inactive, then try Ser2
+ addeq \rx, \rx, #(0x00030000 - 0x00010000)
+ ldreq r1, [\rx, #UTCR3]
+ tsteq r1, #UTCR3_TXE
+
+ @ if all ports are inactive, then there is nothing we can do
+ moveq pc, lr
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UTDR]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TNF
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TBY
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 0000000..dda1b35
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS 6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE 0x1fff
+#define CUT_DMA_SIZE 0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+ DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */
+ DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */
+ DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */
+ DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */
+ DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */
+ DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */
+ DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */
+ DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */
+ DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */
+ DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */
+ DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */
+ DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */
+ DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */
+ DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */
+ DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */
+ DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */
+ DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */
+ DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+ volatile u_long DDAR;
+ volatile u_long SetDCSR;
+ volatile u_long ClrDCSR;
+ volatile u_long RdDCSR;
+ volatile dma_addr_t DBSA;
+ volatile u_long DBTA;
+ volatile dma_addr_t DBSB;
+ volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+ dma_callback_t callback, void *data,
+ dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * sa1100_stop_dma - stop DMA in progress
+ * @regs: identifier for the channel to use
+ *
+ * This stops DMA without clearing buffer pointers. Unlike
+ * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * or sa1100_get_dma_pos().
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * sa1100_resume_dma - resume DMA on a stopped channel
+ * @regs: identifier for the channel to use
+ *
+ * This resumes DMA on a channel previously stopped with
+ * sa1100_stop_dma().
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * sa1100_clear_dma - clear DMA pointers
+ * @regs: identifier for the channel to use
+ *
+ * This clear any DMA state so the DMA engine is ready to restart
+ * with new buffers through sa1100_start_dma(). Any buffers in flight
+ * are discarded.
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 0000000..6aa13c4
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #0xfa000000 @ ICIP = 0xfa050000
+ add \base, \base, #0x00050000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base] @ get irqs
+ ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #0
+ beq 1001f
+ tst \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tst \irqstat, #0x0f
+ moveq \irqstat, \irqstat, lsr #4
+ addeq \irqnr, \irqnr, #4
+ tst \irqstat, #0x03
+ moveq \irqstat, \irqstat, lsr #2
+ addeq \irqnr, \irqnr, #2
+ tst \irqstat, #0x01
+ addeqs \irqnr, \irqnr, #1
+1001:
+ .endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 0000000..582a0c9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ return GPLR & GPIO_GPIO(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ if (value)
+ GPSR = GPIO_GPIO(gpio);
+ else
+ GPCR = GPIO_GPIO(gpio);
+ else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+ if (gpio < 11)
+ return IRQ_GPIO0 + gpio;
+ else
+ return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+ if (irq < IRQ_GPIO11_27)
+ return irq - IRQ_GPIO0;
+ else
+ return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/h3600.h
rename to arch/arm/mach-sa1100/include/mach/h3600.h
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/h3600_gpio.h
rename to arch/arm/mach-sa1100/include/mach/h3600_gpio.h
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 0000000..5976435
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR 0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ * phys virt
+ * 80000000 f8000000
+ * 90000000 fa000000
+ * a0000000 fc000000
+ * b0000000 fe000000
+ */
+
+#define VIO_BASE 0xf8000000 /* virtual start of IO space */
+#define VIO_SHIFT 3 /* x = IO space shrink power */
+#define PIO_START 0x80000000 /* physical start of IO space */
+
+#define io_p2v( x ) \
+ ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x ) \
+ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x) (io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 0000000..4c99c8f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ * Get rid of the special ide_init_hwif_ports() functions
+ * and make a generalised function that can be used by all
+ * architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+ unsigned long ctrl_port, int *irq)
+{
+ unsigned long reg = data_port;
+ int i;
+ int regincr = 1;
+
+ /* The Empeg board has the first two address lines unused */
+ if (machine_is_empeg())
+ regincr = 1 << 2;
+
+ /* The LART doesn't use A0 for IDE */
+ if (machine_is_lart())
+ regincr = 1 << 1;
+
+ memset(hw, 0, sizeof(*hw));
+
+ for (i = 0; i <= 7; i++) {
+ hw->io_ports_array[i] = reg;
+ reg += regincr;
+ }
+
+ hw->io_ports.ctl_addr = ctrl_port;
+
+ if (irq)
+ *irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+ if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+ hw_regs_t hw;
+
+ /* Enable GPIO as interrupt line */
+ GPDR &= ~LART_GPIO_IDE;
+ set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+ /* set PCMCIA interface timing */
+ MECR = 0x00060006;
+
+ /* init the interface */
+ ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+ hw.irq = LART_IRQ_IDE;
+ ide_register_hw(&hw);
+#endif
+ }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 0000000..0c070a6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 0000000..0cb3660
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define IRQ_GPIO0 0
+#define IRQ_GPIO1 1
+#define IRQ_GPIO2 2
+#define IRQ_GPIO3 3
+#define IRQ_GPIO4 4
+#define IRQ_GPIO5 5
+#define IRQ_GPIO6 6
+#define IRQ_GPIO7 7
+#define IRQ_GPIO8 8
+#define IRQ_GPIO9 9
+#define IRQ_GPIO10 10
+#define IRQ_GPIO11_27 11
+#define IRQ_LCD 12 /* LCD controller */
+#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
+#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
+#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
+#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
+#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
+#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
+#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
+#define IRQ_DMA0 20 /* DMA controller channel 0 */
+#define IRQ_DMA1 21 /* DMA controller channel 1 */
+#define IRQ_DMA2 22 /* DMA controller channel 2 */
+#define IRQ_DMA3 23 /* DMA controller channel 3 */
+#define IRQ_DMA4 24 /* DMA controller channel 4 */
+#define IRQ_DMA5 25 /* DMA controller channel 5 */
+#define IRQ_OST0 26 /* OS Timer match 0 */
+#define IRQ_OST1 27 /* OS Timer match 1 */
+#define IRQ_OST2 28 /* OS Timer match 2 */
+#define IRQ_OST3 29 /* OS Timer match 3 */
+#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
+#define IRQ_RTCAlrm 31 /* RTC Alarm */
+
+#define IRQ_GPIO11 32
+#define IRQ_GPIO12 33
+#define IRQ_GPIO13 34
+#define IRQ_GPIO14 35
+#define IRQ_GPIO15 36
+#define IRQ_GPIO16 37
+#define IRQ_GPIO17 38
+#define IRQ_GPIO18 39
+#define IRQ_GPIO19 40
+#define IRQ_GPIO20 41
+#define IRQ_GPIO21 42
+#define IRQ_GPIO22 43
+#define IRQ_GPIO23 44
+#define IRQ_GPIO24 45
+#define IRQ_GPIO25 46
+#define IRQ_GPIO26 47
+#define IRQ_GPIO27 48
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits. IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START 49
+#define IRQ_BOARD_END 65
+
+#define IRQ_SA1111_START (IRQ_BOARD_END)
+#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
+#define SSPXMTINT (IRQ_BOARD_END + 24)
+#define SSPRCVINT (IRQ_BOARD_END + 25)
+#define SSPROR (IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
+#define AUDTFSR (IRQ_BOARD_END + 36)
+#define AUDRFSR (IRQ_BOARD_END + 37)
+#define AUDTUR (IRQ_BOARD_END + 38)
+#define AUDROR (IRQ_BOARD_END + 39)
+#define AUDDTS (IRQ_BOARD_END + 40)
+#define AUDRDD (IRQ_BOARD_END + 41)
+#define AUDSTO (IRQ_BOARD_END + 42)
+#define IRQ_USBPWR (IRQ_BOARD_END + 43)
+#define IRQ_HCIM (IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START (IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS (IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS (IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs. Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
+#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT 9
+
+#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT 5
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 0000000..bc12085
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA 0xc0
+#define GETSCANKEYCODE 0x90
+#define GETTOUCHSAMPLES 0xa0
+#define GETCONTRAST 0xD0
+#define SETCONTRAST 0xD1
+#define GETBRIGHTNESS 0xD2
+#define SETBRIGHTNESS 0xD3
+#define CONTRASTOFF 0xD8
+#define BRIGHTNESSOFF 0xD9
+#define PWMOFF 0xDF
+#define TXDUMMY 0x11
+#define ERRORCODE 0x00
diff --git a/include/asm-arm/arch-sa1100/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/lart.h
rename to arch/arm/mach-sa1100/include/mach/lart.h
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
new file mode 100644
index 0000000..fb8b09a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ * Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+ u32 mccr0;
+ u32 mccr1;
+ unsigned int sclk_rate;
+};
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 0000000..29f639e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+ sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our
+ * memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are
+ * incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS 27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS 0xe0000000
+#define FLUSH_BASE 0xf5000000
+#define FLUSH_BASE_MINICACHE 0xf5100000
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/mtd-xip.h
rename to arch/arm/mach-sa1100/include/mach/mtd-xip.h
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 0000000..d3f044f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions:
+ */
+
+#define NEPONSET_CPLD_BASE (0x10000000)
+#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR 0x10000024 /* Interrupt Reason Register */
+#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
+#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
+#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
+#define _NCR_0 0x100000a0 /* Control Register (RW) */
+#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
+#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
+#define _SWPK 0x10000020 /* Switch pack (RO) */
+#define _WHOAMI 0x10000000 /* System ID Register (RO) */
+
+#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
+
+#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET (1<<0)
+#define IRR_USAR (1<<1)
+#define IRR_SA1111 (1<<2)
+
+#define AUD_SEL_1341 (1<<0)
+#define AUD_MUTE_1341 (1<<1)
+
+#define MDM_CTL0_RTS1 (1 << 0)
+#define MDM_CTL0_DTR1 (1 << 1)
+#define MDM_CTL0_RTS2 (1 << 2)
+#define MDM_CTL0_DTR2 (1 << 3)
+
+#define MDM_CTL1_CTS1 (1 << 0)
+#define MDM_CTL1_DSR1 (1 << 1)
+#define MDM_CTL1_DCD1 (1 << 2)
+#define MDM_CTL1_CTS2 (1 << 3)
+#define MDM_CTL1_DSR2 (1 << 4)
+#define MDM_CTL1_DCD2 (1 << 5)
+
+#define NCR_GP01_OFF (1<<0)
+#define NCR_TP_PWR_EN (1<<1)
+#define NCR_MS_PWR_EN (1<<2)
+#define NCR_ENET_OSC_EN (1<<3)
+#define NCR_SPI_KB_WK_UP (1<<4)
+#define NCR_A0VPP (1<<5)
+#define NCR_A1VPP (1<<6)
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/shannon.h
rename to arch/arm/mach-sa1100/include/mach/shannon.h
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 0000000..9296c45
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS GPIO_GPIO14
+#define GPIO_UART1_DTR GPIO_GPIO7
+#define GPIO_UART1_CTS GPIO_GPIO8
+#define GPIO_UART1_DCD GPIO_GPIO23
+#define GPIO_UART1_DSR GPIO_GPIO6
+
+#define GPIO_UART3_RTS GPIO_GPIO12
+#define GPIO_UART3_DTR GPIO_GPIO16
+#define GPIO_UART3_CTS GPIO_GPIO13
+#define GPIO_UART3_DCD GPIO_GPIO18
+#define GPIO_UART3_DSR GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON GPIO_GPIO0
+#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS IRQ_GPIO15
+#define IRQ_UART1_DCD GPIO_GPIO23
+#define IRQ_UART1_DSR GPIO_GPIO6
+#define IRQ_UART3_CTS GPIO_GPIO13
+#define IRQ_UART3_DCD GPIO_GPIO18
+#define IRQ_UART3_DSR GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*--- PCMCIA ---*/
+#define GPIO_CF_CD GPIO_GPIO24
+#define GPIO_CF_IRQ GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ IRQ_GPIO1
+#define IRQ_GPIO_CF_CD IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE 0xf1000000
+
+#define VCC_5V_EN 0x0001 // For 5V PCMCIA
+#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA
+#define EN1 0x0004 // This is only for EPROM's
+#define EN0 0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON 0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET 0x0040
+#define PCMCIA_RESET 0x0080
+#define DECT_POWER_ON 0x0100
+#define IRDA_SD 0x0200 // Shutdown for powersave
+#define RS232_ON 0x0400
+#define SD_MEDIAQ 0x0800 // Shutdown for powersave
+#define LED2_ON 0x1000
+#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V 0x4000 // Enable 5V circuit
+#define RESET_SIMCARD 0x8000
+
+#define RS232_ENABLE 0x0440
+#define PCMCIAMASK 0x402f
+
+
+struct simpad_battery {
+ unsigned char ac_status; /* line connected yes/no */
+ unsigned char status; /* battery loading yes/no */
+ unsigned char percentage; /* percentage loaded */
+ unsigned short life; /* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE 0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH 0x01
+#define SIMPAD_BATT_STATUS_LOW 0x02
+#define SIMPAD_BATT_STATUS_CRITICAL 0x04
+#define SIMPAD_BATT_STATUS_CHARGING 0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10
+#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT 0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN 0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 0000000..63755ca
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ /* Use on-chip reset capability */
+ RSRR = RSRR_SWR;
+ }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 0000000..7a5d017
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE 3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 0000000..714160b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+ unsigned long serial_port;
+
+ do {
+ serial_port = _Ser3UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser1UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser2UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ return;
+ } while (0);
+
+ /* wait for space in the UART's transmitter */
+ while (!(UART(UTSR1) & UTSR1_TNF))
+ barrier();
+
+ /* send the character out. */
+ UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 0000000..ec8fdc5
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 280e111..86369a8 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2fefd19..81848aa 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
#include <linux/mtd/partitions.h>
#include <video/s1d13xxxfb.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index e319c36..06ea7ab 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
#include <linux/sched.h>
#include <linux/slab.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
+#include <mach/jornada720.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b99121..0cd5269 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
#include <linux/kernel.h>
#include <linux/tty.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index 0af944e..64e9b4b 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
#include "leds.h"
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 9aead5f..cf1e384 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index 0c61ce5..259b48e 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index afa82f4..2bce137 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 066c7dc..0505a1f 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index 1a3564b..d50f4ee 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
#include "leds.h"
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index dd7949f..4856a6b 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 84e956e..83be1c6 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -20,7 +20,7 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 41ac210..111cce6 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
#include <linux/errno.h>
#include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/memory.h>
#include <asm/system.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 60b4d84..9ccdd09 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -17,8 +17,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cc1df07..8dd6353 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -22,8 +22,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
#include <linux/serial_core.h>
#include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 29bdd3d..171441f 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index db49165..641f361 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 428c212..24c0a4b 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
#include <linux/clockchips.h>
#include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define MIN_OSCR_DELTA 2
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
new file mode 100644
index 0000000..0836cb7
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/* arch/arm/mach-shark/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mov \rx, #0xe0000000
+ orr \rx, \rx, #0x000003f8
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx]
+ .endm
+
+ .macro busyuart,rd,rx
+ mov \rd, #0
+1001: add \rd, \rd, #1
+ teq \rd, #0x10000
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/dma.h
new file mode 100644
index 0000000..c0a29bd
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-shark/include/mach/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev / .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS 0xC0400000
+#define MAX_DMA_CHANNELS 8
+#define DMA_ISA_CASCADE 4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
new file mode 100644
index 0000000..e2853c0
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-shark/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov r4, #0xe0000000
+
+ mov \irqstat, #0x0C
+ strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */
+ ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7
+ and \irqstat, \irqnr, #0x80
+ teq \irqstat, #0
+ beq 43f
+ and \irqnr, \irqnr, #7
+ teq \irqnr, #2
+ bne 44f
+43: mov \irqstat, #0x0C
+ strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
+ ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8
+ and \irqstat, \irqnr, #0x80
+ teq \irqstat, #0
+ beq 44f
+ and \irqnr, \irqnr, #7
+ add \irqnr, \irqnr, #8
+44: teq \irqstat, #0
+ .endm
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
new file mode 100644
index 0000000..cb0ee29
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE 0xe0000000
+
+#else
+
+#define IO_BASE 0
+
+#endif
+
+#define IO_SIZE 0x08000000
+#define IO_START 0x40000000
+#define ROMCARD_SIZE 0x08000000
+#define ROMCARD_START 0x10000000
+
+#define PCIO_BASE 0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START 0x06000000
+#define FB_SIZE 0x01000000
+
+#define UNCACHEABLE_ADDR 0xdf010000
+
+#define SEQUOIA_LED_GREEN (1<<6)
+#define SEQUOIA_LED_AMBER (1<<5)
+#define SEQUOIA_LED_BACK (1<<7)
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x6000
+#define PCIBIOS_MIN_MEM 0x50000000
+#define PCIMEM_BASE 0xe8000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
new file mode 100644
index 0000000..9247592
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-shark/include/mach/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x) (!((x) & 0x80000000))
+
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+
+
+static inline unsigned int __ioaddr (unsigned int port) \
+{ \
+ if (__PORT_PCIO(port)) \
+ return (unsigned int)(PCIO_BASE + (port)); \
+ else \
+ return (unsigned int)(IO_BASE + (port)); \
+}
+
+#define __mem_pci(addr) (addr)
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p) \
+ (*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p) \
+ (*(volatile unsigned char *)(p))
+
+#define outl_t(v,p) \
+ (*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p) \
+ (*(volatile unsigned long *)(p))
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
new file mode 100644
index 0000000..0586acd
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-shark/include/mach/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS 16
+
+#define IRQ_ISA_KEYBOARD 1
+#define RTC_IRQ 8
+#define I8042_KBD_IRQ 1
+#define I8042_AUX_IRQ 12
+#define IRQ_HARDDISK 14
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
new file mode 100644
index 0000000..b7874ad
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-shark/include/mach/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x08000000)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size)
+{
+ if (node != 0) return;
+ /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+ zone_size[1] = zone_size[0] - 1024;
+ zone_size[0] = 1024;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+ __arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area
+ */
+#define FLUSH_BASE_PHYS 0x80000000
+#define FLUSH_BASE 0xdf000000
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
new file mode 100644
index 0000000..85aceef
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-shark/include/mach/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+ short temp;
+ local_irq_disable();
+ /* Reset the Machine via pc[3] of the sequoia chipset */
+ outw(0x09,0x24);
+ temp=inw(0x26);
+ temp = temp | (1<<3) | (1<<10);
+ outw(0x09,0x24);
+ outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
new file mode 100644
index 0000000..bb6eeae
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-shark/include/mach/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
new file mode 100644
index 0000000..3725e16
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static inline void putc(int c)
+{
+ int t;
+
+ SERIAL_BASE[0] = c;
+ t=0x10000;
+ while (t--);
+}
+
+static inline void flush(void)
+{
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+ int i;
+ char x;
+
+ putc('0');
+ putc('x');
+ for (i=0;i<8;i++) {
+ x='0'+((z>>((7-i)*4))&0xf);
+ if (x>'9') x=x-'0'+'A'-10;
+ putc(x);
+ }
+}
+
+static void putr()
+{
+ putc('\n');
+ putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
new file mode 100644
index 0000000..f6c6837
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-shark/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af..44b0811 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
* by Alexander Schulz
*
* derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
* Copyright (C) 1996-1998 Russell King
*/
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 333ece0..b189647 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
#include <linux/spinlock.h>
#include <linux/ioport.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 12097f4..d75e795 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,7 +31,7 @@
#include <asm/cnt32_to_63.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
new file mode 100644
index 0000000..b4ac00e
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x10000000
+ movne \rx, #0xf1000000 @ virtual base
+ orr \rx, \rx, #0x001F0000
+ orr \rx, \rx, #0x00001000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
new file mode 100644
index 0000000..0aabf12
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-versatile/include/mach/dma.h
+ *
+ * Copyright (C) 2003 ARM Limited.
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
new file mode 100644
index 0000000..8c80209
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+ mov \irqnr, #0
+ teq \irqstat, #0
+ beq 1003f
+
+1001: tst \irqstat, #15
+ bne 1002f
+ add \irqnr, \irqnr, #4
+ movs \irqstat, \irqstat, lsr #4
+ bne 1001b
+1002: tst \irqstat, #1
+ bne 1003f
+ add \irqnr, \irqnr, #1
+ movs \irqstat, \irqstat, lsr #1
+ bne 1002b
+1003: /* EQ will be set if no irqs pending */
+
+@ clz \irqnr, \irqstat
+@1003: /* EQ will be set if we reach MAXIRQNUM */
+ .endm
+
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
new file mode 100644
index 0000000..7aa906c
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-versatile/include/mach/hardware.h
+ *
+ * This file contains the hardware definitions of the Versatile boards.
+ *
+ * Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * PCI space virtual addresses
+ */
+#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
+#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+
+#if 0
+#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000
+#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000
+#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000
+
+#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0
+#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1
+#endif
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO 0x44000000
+#define PCIBIOS_MIN_MEM 0x50000000
+
+#define pcibios_assign_all_busses() 1
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 0000000..c0b9dd1
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
new file mode 100644
index 0000000..216a131
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -0,0 +1,211 @@
+/*
+ * arch/arm/mach-versatile/include/mach/irqs.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <mach/platform.h>
+
+/*
+ * IRQ interrupts definitions are the same as the INT definitions
+ * held within platform.h
+ */
+#define IRQ_VIC_START 0
+#define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx (IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1 (IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3 (IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0 (IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1 (IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2 (IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3 (IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT (IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT (IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0 (IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1 (IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2 (IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT (IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT (IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT (IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT (IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT (IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT (IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21 (IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22 (IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23 (IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24 (IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25 (IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26 (IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27 (IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28 (IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29 (IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30 (IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END (IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT INTMASK_WDOGINT
+#define IRQMASK_SOFTINT INTMASK_SOFTINT
+#define IRQMASK_COMMRx INTMASK_COMMRx
+#define IRQMASK_COMMTx INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3
+#define IRQMASK_RTCINT INTMASK_RTCINT
+#define IRQMASK_SSPINT INTMASK_SSPINT
+#define IRQMASK_UARTINT0 INTMASK_UARTINT0
+#define IRQMASK_UARTINT1 INTMASK_UARTINT1
+#define IRQMASK_UARTINT2 INTMASK_UARTINT2
+#define IRQMASK_SCIINT INTMASK_SCIINT
+#define IRQMASK_CLCDINT INTMASK_CLCDINT
+#define IRQMASK_DMAINT INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT INTMASK_MBXINT
+#define IRQMASK_GNDINT INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21 INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22 INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23 INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24 INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25 INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26 INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27 INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28 INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29 INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30 INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31 INTMASK_VICSOURCE31
+
+/*
+ * FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_WDOGINT INT_WDOGINT
+#define FIQ_SOFTINT INT_SOFTINT
+#define FIQ_COMMRx INT_COMMRx
+#define FIQ_COMMTx INT_COMMTx
+#define FIQ_TIMERINT0_1 INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3 INT_TIMERINT2_3
+#define FIQ_GPIOINT0 INT_GPIOINT0
+#define FIQ_GPIOINT1 INT_GPIOINT1
+#define FIQ_GPIOINT2 INT_GPIOINT2
+#define FIQ_GPIOINT3 INT_GPIOINT3
+#define FIQ_RTCINT INT_RTCINT
+#define FIQ_SSPINT INT_SSPINT
+#define FIQ_UARTINT0 INT_UARTINT0
+#define FIQ_UARTINT1 INT_UARTINT1
+#define FIQ_UARTINT2 INT_UARTINT2
+#define FIQ_SCIINT INT_SCIINT
+#define FIQ_CLCDINT INT_CLCDINT
+#define FIQ_DMAINT INT_DMAINT
+#define FIQ_PWRFAILINT INT_PWRFAILINT
+#define FIQ_MBXINT INT_MBXINT
+#define FIQ_GNDINT INT_GNDINT
+#define FIQ_VICSOURCE21 INT_VICSOURCE21
+#define FIQ_VICSOURCE22 INT_VICSOURCE22
+#define FIQ_VICSOURCE23 INT_VICSOURCE23
+#define FIQ_VICSOURCE24 INT_VICSOURCE24
+#define FIQ_VICSOURCE25 INT_VICSOURCE25
+#define FIQ_VICSOURCE26 INT_VICSOURCE26
+#define FIQ_VICSOURCE27 INT_VICSOURCE27
+#define FIQ_VICSOURCE28 INT_VICSOURCE28
+#define FIQ_VICSOURCE29 INT_VICSOURCE29
+#define FIQ_VICSOURCE30 INT_VICSOURCE30
+#define FIQ_VICSOURCE31 INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT INTMASK_WDOGINT
+#define FIQMASK_SOFTINT INTMASK_SOFTINT
+#define FIQMASK_COMMRx INTMASK_COMMRx
+#define FIQMASK_COMMTx INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0 INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1 INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2 INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3 INTMASK_GPIOINT3
+#define FIQMASK_RTCINT INTMASK_RTCINT
+#define FIQMASK_SSPINT INTMASK_SSPINT
+#define FIQMASK_UARTINT0 INTMASK_UARTINT0
+#define FIQMASK_UARTINT1 INTMASK_UARTINT1
+#define FIQMASK_UARTINT2 INTMASK_UARTINT2
+#define FIQMASK_SCIINT INTMASK_SCIINT
+#define FIQMASK_CLCDINT INTMASK_CLCDINT
+#define FIQMASK_DMAINT INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT INTMASK_MBXINT
+#define FIQMASK_GNDINT INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21 INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22 INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23 INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24 INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25 INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26 INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27 INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28 INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29 INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30 INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31 INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START 32
+#define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1 (IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3 (IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3 (IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD (IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH (IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD (IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC (IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A (IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A (IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI (IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH (IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB (IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0 (IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END 63
+
+#define SIC_IRQMASK_MMCI0B SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0 SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1 SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3 SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3 SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0 SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1 SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2 SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3 SIC_INTMASK_PCI3
+
+#define NR_IRQS 64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
new file mode 100644
index 0000000..b6315c0
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-versatile/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
new file mode 100644
index 0000000..27cbe6a
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -0,0 +1,510 @@
+/*
+ * arch/arm/mach-versatile/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __address_h
+#define __address_h 1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI 0x30000000
+#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */
+#define VERSATILE_BOOT_ROM_SIZE SZ_64M
+
+#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE SZ_2M
+
+#define VERSATILE_FLASH_BASE 0x34000000
+#define VERSATILE_FLASH_SIZE SZ_64M
+
+/*
+ * SDRAM
+ */
+#define VERSATILE_SDRAM_BASE 0x00000000
+
+/*
+ * Logic expansion modules
+ *
+ */
+
+
+/* ------------------------------------------------------------------------
+ * Versatile Registers
+ * ------------------------------------------------------------------------
+ *
+ */
+#define VERSATILE_SYS_ID_OFFSET 0x00
+#define VERSATILE_SYS_SW_OFFSET 0x04
+#define VERSATILE_SYS_LED_OFFSET 0x08
+#define VERSATILE_SYS_OSC0_OFFSET 0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET 0x10
+#define VERSATILE_SYS_OSC2_OFFSET 0x14
+#define VERSATILE_SYS_OSC3_OFFSET 0x18
+#define VERSATILE_SYS_OSC4_OFFSET 0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET 0x1C
+#endif
+
+#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
+
+#define VERSATILE_SYS_LOCK_OFFSET 0x20
+#define VERSATILE_SYS_100HZ_OFFSET 0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET 0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET 0x40
+#define VERSATILE_SYS_PCICTL_OFFSET 0x44
+#define VERSATILE_SYS_MCI_OFFSET 0x48
+#define VERSATILE_SYS_FLASH_OFFSET 0x4C
+#define VERSATILE_SYS_CLCD_OFFSET 0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET 0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET 0x58
+#define VERSATILE_SYS_24MHz_OFFSET 0x5C
+#define VERSATILE_SYS_MISC_OFFSET 0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90
+
+#define VERSATILE_SYS_BASE 0x10000000
+#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
+#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/*
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04
+#define VERSATILE_SYS_CTRL_RESET_POR 0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC 0x06
+
+#define VERSATILE_SYS_CTRL_LED (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ * Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/*
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4 = build value
+ * 3:0 = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
+ * SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ * - used to acknowledge and control MMCI and UART interrupts
+ */
+#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
+#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */
+ /* write 1 to acknowledge and clear */
+#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
+#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE 0x10001000 /* PCI core control */
+#define VERSATILE_I2C_BASE 0x10002000 /* I2C control */
+#define VERSATILE_SIC_BASE 0x10003000 /* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE 0x10004000 /* Audio */
+#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
+#define VERSATILE_KMI0_BASE 0x10006000 /* KMI interface */
+#define VERSATILE_KMI1_BASE 0x10007000 /* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE 0x10008000 /* Character LCD */
+#define VERSATILE_UART3_BASE 0x10009000 /* UART 3 */
+#define VERSATILE_SCI1_BASE 0x1000A000
+#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
+ /* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE 0x10010000 /* Ethernet */
+#define VERSATILE_USB_BASE 0x10020000 /* USB */
+ /* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE 0x10100000 /* SMC */
+#define VERSATILE_MPMC_BASE 0x10110000 /* MPMC */
+#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
+#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */
+#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */
+ /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */
+#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
+#define VERSATILE_WATCHDOG_BASE 0x101E1000 /* Watchdog */
+#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */
+#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */
+ /* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE 0x101F0000 /* Smart card controller */
+#define VERSATILE_UART0_BASE 0x101F1000 /* Uart 0 */
+#define VERSATILE_UART1_BASE 0x101F2000 /* Uart 1 */
+#define VERSATILE_UART2_BASE 0x101F3000 /* Uart 2 */
+#define VERSATILE_SSP_BASE 0x101F4000 /* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */
+#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
+#define VERSATILE_MBX_BASE 0x40000000 /* MBX */
+
+/* PCI space */
+#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */
+#define VERSATILE_PCI_CFG_BASE 0x42000000
+#define VERSATILE_PCI_MEM_BASE0 0x44000000
+#define VERSATILE_PCI_MEM_BASE1 0x50000000
+#define VERSATILE_PCI_MEM_BASE2 0x60000000
+/* Sizes of above maps */
+#define VERSATILE_PCI_BASE_SIZE 0x01000000
+#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000
+#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
+#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
+#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
+
+#define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE 0x2C000000
+#define VERSATILE_DOC_SIZE (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE 512
+#define VERSATILE_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES 32
+#define START_PAGE 0x80
+
+/*
+ * LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0 (1 << 0)
+#define VERSATILE_SYS_LED1 (1 << 1)
+#define VERSATILE_SYS_LED2 (1 << 2)
+#define VERSATILE_SYS_LED3 (1 << 3)
+#define VERSATILE_SYS_LED4 (1 << 4)
+#define VERSATILE_SYS_LED5 (1 << 5)
+#define VERSATILE_SYS_LED6 (1 << 6)
+#define VERSATILE_SYS_LED7 (1 << 7)
+
+#define ALL_LEDS 0xFF
+
+#define LED_BANK VERSATILE_SYS_LED
+
+/*
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */
+#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */
+#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ * Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ *
+ * Offsets from interrupt controller base
+ *
+ * System Controller interrupt controller base is
+ *
+ * VERSATILE_IC_BASE
+ *
+ * Core Module interrupt controller base is
+ *
+ * VERSATILE_SYS_IC
+ *
+ */
+/* VIC definitions in include/asm-arm/hardware/vic.h */
+
+#define SIC_IRQ_STATUS 0
+#define SIC_IRQ_RAW_STATUS 0x04
+#define SIC_IRQ_ENABLE 0x08
+#define SIC_IRQ_ENABLE_SET 0x08
+#define SIC_IRQ_ENABLE_CLEAR 0x0C
+#define SIC_INT_SOFT_SET 0x10
+#define SIC_INT_SOFT_CLEAR 0x14
+#define SIC_INT_PIC_ENABLE 0x20 /* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES 0x20 /* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC 0x24 /* Clear interrupt pass through bits */
+
+/* ------------------------------------------------------------------------
+ * Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT 0 /* Watchdog timer */
+#define INT_SOFTINT 1 /* Software interrupt */
+#define INT_COMMRx 2 /* Debug Comm Rx interrupt */
+#define INT_COMMTx 3 /* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */
+#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */
+#define INT_GPIOINT0 6 /* GPIO 0 */
+#define INT_GPIOINT1 7 /* GPIO 1 */
+#define INT_GPIOINT2 8 /* GPIO 2 */
+#define INT_GPIOINT3 9 /* GPIO 3 */
+#define INT_RTCINT 10 /* Real Time Clock */
+#define INT_SSPINT 11 /* Synchronous Serial Port */
+#define INT_UARTINT0 12 /* UART 0 on development chip */
+#define INT_UARTINT1 13 /* UART 1 on development chip */
+#define INT_UARTINT2 14 /* UART 2 on development chip */
+#define INT_SCIINT 15 /* Smart Card Interface */
+#define INT_CLCDINT 16 /* CLCD controller */
+#define INT_DMAINT 17 /* DMA controller */
+#define INT_PWRFAILINT 18 /* Power failure */
+#define INT_MBXINT 19 /* Graphics processor */
+#define INT_GNDINT 20 /* Reserved */
+ /* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21 21 /* Disk on Chip */
+#define INT_VICSOURCE22 22 /* MCI0A */
+#define INT_VICSOURCE23 23 /* MCI1A */
+#define INT_VICSOURCE24 24 /* AACI */
+#define INT_VICSOURCE25 25 /* Ethernet */
+#define INT_VICSOURCE26 26 /* USB */
+#define INT_VICSOURCE27 27 /* PCI 0 */
+#define INT_VICSOURCE28 28 /* PCI 1 */
+#define INT_VICSOURCE29 29 /* PCI 2 */
+#define INT_VICSOURCE30 30 /* PCI 3 */
+#define INT_VICSOURCE31 31 /* SIC source */
+
+/*
+ * Interrupt bit positions
+ *
+ */
+#define INTMASK_WDOGINT (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT (1 << INT_SOFTINT)
+#define INTMASK_COMMRx (1 << INT_COMMRx)
+#define INTMASK_COMMTx (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3 (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT (1 << INT_RTCINT)
+#define INTMASK_SSPINT (1 << INT_SSPINT)
+#define INTMASK_UARTINT0 (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1 (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2 (1 << INT_UARTINT2)
+#define INTMASK_SCIINT (1 << INT_SCIINT)
+#define INTMASK_CLCDINT (1 << INT_CLCDINT)
+#define INTMASK_DMAINT (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT (1 << INT_MBXINT)
+#define INTMASK_GNDINT (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21 (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22 (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23 (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24 (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25 (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26 (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27 (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28 (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29 (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30 (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31 (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT 0x003FFFFF
+
+#define MAXIRQNUM 31
+#define MAXFIQNUM 31
+#define MAXSWINUM 31
+
+/* ------------------------------------------------------------------------
+ * Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B 1 /* Multimedia Card 0B */
+#define SIC_INT_MMCI1B 2 /* Multimedia Card 1B */
+#define SIC_INT_KMI0 3 /* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1 4 /* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3 5 /* Smart Card interface */
+#define SIC_INT_UART3 6 /* UART 3 empty or data available */
+#define SIC_INT_CLCD 7 /* Character LCD */
+#define SIC_INT_TOUCH 8 /* Touchscreen */
+#define SIC_INT_KEYPAD 9 /* Key pressed on display keypad */
+ /* 10:20 - reserved */
+#define SIC_INT_DoC 21 /* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A 22 /* MMC 0A */
+#define SIC_INT_MMCI1A 23 /* MMC 1A */
+#define SIC_INT_AACI 24 /* Audio Codec */
+#define SIC_INT_ETH 25 /* Ethernet controller */
+#define SIC_INT_USB 26 /* USB controller */
+#define SIC_INT_PCI0 27
+#define SIC_INT_PCI1 28
+#define SIC_INT_PCI2 29
+#define SIC_INT_PCI3 30
+
+
+#define SIC_INTMASK_MMCI0B (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0 (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1 (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3 (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3 (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0 (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3)
+/*
+ * Application Flash
+ *
+ */
+#define FLASH_BASE VERSATILE_FLASH_BASE
+#define FLASH_SIZE VERSATILE_FLASH_SIZE
+#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE SZ_128K
+
+/*
+ * Boot Flash
+ *
+ */
+#define EPROM_BASE VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
+
+/*
+ * Clean base - dummy
+ *
+ */
+#define CLEAN_BASE EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK 0
+#define VERSATILE_TIMCLK 1
+
+#define VERSATILE_TIMER1_EnSel 15
+#define VERSATILE_TIMER2_EnSel 17
+#define VERSATILE_TIMER3_EnSel 19
+#define VERSATILE_TIMER4_EnSel 21
+
+
+#define MAX_TIMER 2
+#define MAX_PERIOD 699050
+#define TICKS_PER_uSEC 1
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE 0x10000000
+#define VERSATILE_CSR_SIZE 0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4)
+#endif
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
new file mode 100644
index 0000000..91fa559
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-versatile/include/mach/system.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ u32 val;
+
+ val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
+ val |= 0x105;
+
+ __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
+ __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
+ __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
new file mode 100644
index 0000000..426199b
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-versatile/include/mach/timex.h
+ *
+ * Versatile architecture timex specifications
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
new file mode 100644
index 0000000..3dd0048
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-versatile/include/mach/uncompress.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define AMBA_UART_DR (*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH (*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR (*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR (*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ while (AMBA_UART_FR & (1 << 5))
+ barrier();
+
+ AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+ while (AMBA_UART_FR & (1 << 3))
+ barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
new file mode 100644
index 0000000..427e361
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-versatile/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 4335c07..36f23f8 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 6e1fe3b..76375c6 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 2eeda4b..1725f01 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 3e8d8c7..3b3639e 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 8e23c8d..33926c9 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index d67829f..51a9b0b 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index d05e235..bbe1057 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 56bd3bf..871ba01 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 6a0adec..7bd9e71 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 65e26c1..92db6e0 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include "op_counter.h"
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a..f724208 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <asm/hardware/iop3xx.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
#include <asm/hardware/iop_adma.h>
#ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index b7b8fcb..6dcbcc4 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,7 +25,7 @@
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index c30d188..39dcfb4 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index e32054f..54708bf 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,7 +21,7 @@
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/pci.h>
#include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index da9e824..c53fefb 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
static unsigned long ticks_per_jiffy;
static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd..2f86272 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,7 +39,7 @@
#include <linux/string.h>
#include <linux/version.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 73d3046..733e0ac 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm-generic/bug.h>
static struct mxc_gpio_port *mxc_gpio_ports;
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx27ads.h
rename to arch/arm/plat-mxc/include/mach/board-mx27ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx31ads.h
rename to arch/arm/plat-mxc/include/mach/board-mx31ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx31lite.h
rename to arch/arm/plat-mxc/include/mach/board-mx31lite.h
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-pcm037.h
rename to arch/arm/plat-mxc/include/mach/board-pcm037.h
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-pcm038.h
rename to arch/arm/plat-mxc/include/mach/board-pcm038.h
diff --git a/include/asm-arm/arch-mxc/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
similarity index 100%
rename from include/asm-arm/arch-mxc/clock.h
rename to arch/arm/plat-mxc/include/mach/clock.h
diff --git a/include/asm-arm/arch-mxc/common.h b/arch/arm/plat-mxc/include/mach/common.h
similarity index 100%
rename from include/asm-arm/arch-mxc/common.h
rename to arch/arm/plat-mxc/include/mach/common.h
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
new file mode 100644
index 0000000..b9907be
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -0,0 +1,49 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <mach/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <mach/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <mach/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <mach/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <mach/board-pcm038.h>
+#endif
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =MXC_LL_UART_PADDR @ physical
+ ldrne \rx, =MXC_LL_UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/include/asm-arm/arch-mxc/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-mxc/dma.h
rename to arch/arm/plat-mxc/include/mach/dma.h
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
similarity index 100%
rename from include/asm-arm/arch-mxc/entry-macro.S
rename to arch/arm/plat-mxc/include/mach/entry-macro.S
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
new file mode 100644
index 0000000..65eedc0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+ void __iomem *base;
+ int irq;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
new file mode 100644
index 0000000..3caadee
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#ifdef CONFIG_ARCH_MX3
+# include <mach/mx31.h>
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+# include <mach/mx27.h>
+# endif
+#endif
+
+#include <mach/mxc.h>
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iim.h
rename to arch/arm/plat-mxc/include/mach/iim.h
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
similarity index 100%
rename from include/asm-arm/arch-mxc/imx-uart.h
rename to arch/arm/plat-mxc/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-mxc/io.h b/arch/arm/plat-mxc/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-mxc/io.h
rename to arch/arm/plat-mxc/include/mach/io.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iomux-mx1-mx2.h
rename to arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iomux-mx3.h
rename to arch/arm/plat-mxc/include/mach/iomux-mx3.h
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
new file mode 100644
index 0000000..228c4f6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <mach/hardware.h>
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
new file mode 100644
index 0000000..d7a8d3e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a) __virt_to_phys(a)
+
+/*
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a) __phys_to_virt(a)
+
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mx27.h
rename to arch/arm/plat-mxc/include/mach/mx27.h
diff --git a/include/asm-arm/arch-mxc/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mx31.h
rename to arch/arm/plat-mxc/include/mach/mx31.h
diff --git a/include/asm-arm/arch-mxc/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mxc.h
rename to arch/arm/plat-mxc/include/mach/mxc.h
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
new file mode 100644
index 0000000..130aebf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT TIM1_INT
+
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_CLK_TIN (3<<1)
+#define TCTL_CLK_32 (4<<1)
+
+#define MXC_TCTL 0x00
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT1
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_4 (2<<1)
+#define TCTL_IRQEN (1<<4)
+#define TCTL_FRR (1<<8)
+#define MXC_TPRER 0x04
+#define MXC_TCMP 0x08
+#define MXC_TCR 0x0c
+#define MXC_TCN 0x10
+#define MXC_TSTAT 0x14
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+ __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+ TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT MXC_INT_GPT
+
+#define MXC_TCTL 0x00
+#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG (1<<6)
+#define TCTL_FRR (1<<9)
+#define TCTL_WAITEN (1<<3)
+
+#define MXC_TPRER 0x04
+#define MXC_TSTAT 0x08
+#define TSTAT_OF1 (1<<0)
+#define TSTAT_OF2 (1<<1)
+#define TSTAT_OF3 (1<<2)
+#define TSTAT_IF1 (1<<3)
+#define TSTAT_IF2 (1<<4)
+#define TSTAT_ROV (1<<5)
+#define MXC_IR 0x0c
+#define MXC_TCMP 0x10
+#define MXC_TCMP2 0x14
+#define MXC_TCMP3 0x18
+#define MXC_TCR 0x1c
+#define MXC_TCN 0x24
+
+static inline void gpt_irq_disable(void)
+{
+ __raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+ __raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+ __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR (1<<15)
+#define TCTL_CC (1<<10)
+#define TCTL_OM (1<<9)
+#define TCTL_CAP_RIS (1<<6)
+#define TCTL_CAP_FAL (2<<6)
+#define TCTL_CAP_RIS_FAL (3<<6)
+#define TCTL_CAP_ENA (1<<5)
+#define TCTL_TEN (1<<0)
+
+#endif
diff --git a/include/asm-arm/arch-mxc/system.h b/arch/arm/plat-mxc/include/mach/system.h
similarity index 100%
rename from include/asm-arm/arch-mxc/system.h
rename to arch/arm/plat-mxc/include/mach/system.h
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
new file mode 100644
index 0000000..0b0af02
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <mach/hardware.h> /* for CLOCK_TICK_RATE */
+
+#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
new file mode 100644
index 0000000..de6fe03
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ *
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <mach/hardware.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR 0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+ static unsigned long serial_port = 0;
+
+ if (unlikely(serial_port == 0)) {
+ do {
+ serial_port = UART1_BASE_ADDR;
+ if (UART(UCR1) & UCR1_UARTEN)
+ break;
+ serial_port = UART2_BASE_ADDR;
+ if (UART(UCR1) & UCR1_UARTEN)
+ break;
+ return;
+ } while (0);
+ }
+
+ while (!(UART(USR2) & USR2_TXFE))
+ barrier();
+
+ UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
similarity index 100%
rename from include/asm-arm/arch-mxc/vmalloc.h
rename to arch/arm/plat-mxc/include/mach/vmalloc.h
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1204456..d97387a 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
#include <linux/string.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
void mxc_gpio_mode(int gpio_mode)
{
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01d..1053b66 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
#include <linux/irq.h>
#include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index be9680a..fd28f51 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
#include <linux/clockchips.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741d..23a0705 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 6a95529..f4dff42 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
#include <linux/serial_reg.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
# include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 3c8ef1a..ae1de30 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 7228ef8..5b73bb2 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index a47695c..9422dee 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
#include <linux/leds.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 9b4240b..187e3d8 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,17 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 69450d6..a63b644 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
#include <linux/io.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
#undef DEBUG
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 30b6f2c..743a4ab 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
#include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
/* register offsets */
#define _OMAP_TIMER_ID_OFFSET 0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index b0b3c54..17a92a3 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
#include <linux/platform_device.h>
#include <linux/bootmem.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach/map.h>
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7112b5d..3e76ee2 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
#include <asm/mach/irq.h>
#include <asm/io.h>
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 647ed59..0e6d147 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,7 +26,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
new file mode 100644
index 0000000..5ccedac
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/plat-omap/include/mach/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR 0x00
+#define RIGHT_LINE_VOLUME_ADDR 0x01
+#define LEFT_CHANNEL_VOLUME_ADDR 0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
+#define ANALOG_AUDIO_CONTROL_ADDR 0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
+#define POWER_DOWN_CONTROL_ADDR 0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
+#define SAMPLE_RATE_CONTROL_ADDR 0x08
+#define DIGITAL_INTERFACE_ACT_ADDR 0x09
+#define RESET_CONTROL_ADDR 0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED 0x0100
+#define LIM_MUTED 0x0080
+#define LIV_DEFAULT 0x0017
+#define LIV_MAX 0x001f
+#define LIV_MIN 0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON 0x0080
+#define LHV_DEFAULT 0x0079
+#define LHV_MAX 0x007f
+#define LHV_MIN 0x0000
+
+// Analog audio path control register
+#define STA_REG(x) ((x)<<6)
+#define STE_ENABLED 0x0020
+#define DAC_SELECTED 0x0010
+#define BYPASS_ON 0x0008
+#define INSEL_MIC 0x0004
+#define MICM_MUTED 0x0002
+#define MICB_20DB 0x0001
+
+// Digital audio path control register
+#define DACM_MUTE 0x0008
+#define DEEMP_32K 0x0002
+#define DEEMP_44K 0x0004
+#define DEEMP_48K 0x0006
+#define ADCHP_ON 0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF 0x0080
+#define CLK_OFF 0x0040
+#define OSC_OFF 0x0020
+#define OUT_OFF 0x0010
+#define DAC_OFF 0x0008
+#define ADC_OFF 0x0004
+#define MIC_OFF 0x0002
+#define LINE_OFF 0x0001
+
+// Digital audio interface register
+#define MS_MASTER 0x0040
+#define LRSWAP_ON 0x0020
+#define LRP_ON 0x0010
+#define IWL_16 0x0000
+#define IWL_20 0x0004
+#define IWL_24 0x0008
+#define IWL_32 0x000C
+#define FOR_I2S 0x0002
+#define FOR_DSP 0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF 0x0080
+#define CLKIN_HALF 0x0040
+#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON 0x0001
+#define SR_MASK 0xf
+#define CLKOUT_SHIFT 7
+#define CLKIN_SHIFT 6
+#define SR_SHIFT 2
+#define BOSR_SHIFT 1
+
+// Digital interface register
+#define ACT_ON 0x0001
+
+#define TLV320AIC23ID1 (0x1a) // cs low
+#define TLV320AIC23ID2 (0x1b) // cs high
+
+void aic23_power_up(void);
+void aic23_power_down(void);
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
similarity index 100%
rename from include/asm-arm/arch-omap/blizzard.h
rename to arch/arm/plat-omap/include/mach/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
new file mode 100644
index 0000000..cf1dc02
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ 149
+#define SDP2430_CS0_BASE 0x04000000
+
+#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
new file mode 100644
index 0000000..51b102d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS 0x01000000
+#define AMS_DELTA_LATCH1_VIRT 0xEA000000
+#define AMS_DELTA_MODEM_PHYS 0x04000000
+#define AMS_DELTA_MODEM_VIRT 0xEB000000
+#define AMS_DELTA_LATCH2_PHYS 0x08000000
+#define AMS_DELTA_LATCH2_VIRT 0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
+#define AMS_DELTA_LATCH1_LED_VOICE 0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE 0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP 0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
+#define AMS_DELTA_GPIO_PIN_CONFIG 11
+#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
new file mode 100644
index 0000000..d6f2a8e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+extern void apollon_mmc_init(void);
+
+/* Placeholder for APOLLON specific defines */
+#define APOLLON_ETHR_GPIO_IRQ 74
+
+#endif /* __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
new file mode 100644
index 0000000..cb3c5ae
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <mach/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE 0xE8100000
+#define FSAMPLE_CPLD_SIZE SZ_4K
+#define FSAMPLE_CPLD_START 0x05080000
+
+#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET 0
+#define FSAMPLE_CPLD_BIT_LCD_RESET 1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
+#define FSAMPLE_CPLD_BIT_OTG_RESET 9
+
+#define fsample_cpld_set(bit) \
+ fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
new file mode 100644
index 0000000..2a050e9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START 0x04000300
+
+extern void h2_mmc_init(void);
+extern void h2_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
new file mode 100644
index 0000000..14909dc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START 0x04000300
+
+extern void h3_mmc_init(void);
+extern void h3_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
new file mode 100644
index 0000000..1470cd3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+#define OMAP24XX_ETHR_GPIO_IRQ 92
+#endif /* __ASM_ARCH_OMAP_H4_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
new file mode 100644
index 0000000..5ae3e79
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP15XX)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE 0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START 0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
new file mode 100644
index 0000000..2abbe00
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ * Information structures for Nokia-specific board config data
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT 0x4e01
+#define OMAP_TAG_WLAN_CX3110X 0x4e02
+#define OMAP_TAG_CBUS 0x4e03
+#define OMAP_TAG_EM_ASIC_BB5 0x4e04
+
+
+#define BT_CHIP_CSR 1
+#define BT_CHIP_TI 2
+
+#define BT_SYSCLK_12 1
+#define BT_SYSCLK_38_4 2
+
+struct omap_bluetooth_config {
+ u8 chip_type;
+ u8 bt_wakeup_gpio;
+ u8 host_wakeup_gpio;
+ u8 reset_gpio;
+ u8 bt_uart;
+ u8 bd_addr[6];
+ u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+ u8 chip_type;
+ s16 power_gpio;
+ s16 irq_gpio;
+ s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+ s16 clk_gpio;
+ s16 dat_gpio;
+ s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+ s16 retu_irq_gpio;
+ s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
new file mode 100644
index 0000000..3850cb1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START 0x04800300
+
+/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
+# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
+# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
+# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
+# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
+# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
+
+#endif /* __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
new file mode 100644
index 0000000..6906cde
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten E device.
+ *
+ * Maintainters : http://palmtelinux.sf.net
+ * palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTE_H
+#define __OMAP_BOARD_PALMTE_H
+
+#define PALMTE_USBDETECT_GPIO 0
+#define PALMTE_USB_OR_DC_GPIO 1
+#define PALMTE_TSC_GPIO 4
+#define PALMTE_PINTDAV_GPIO 6
+#define PALMTE_MMC_WP_GPIO 8
+#define PALMTE_MMC_POWER_GPIO 9
+#define PALMTE_HDQ_GPIO 11
+#define PALMTE_HEADPHONES_GPIO 14
+#define PALMTE_SPEAKER_GPIO 15
+#define PALMTE_DC_GPIO OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
+
+#endif /* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
new file mode 100644
index 0000000..e79f382
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten|T device.
+ *
+ * Maintainters : Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTT_H
+#define __OMAP_BOARD_PALMTT_H
+
+#define PALMTT_USBDETECT_GPIO 0
+#define PALMTT_CABLE_GPIO 1
+#define PALMTT_LED_GPIO 3
+#define PALMTT_PENIRQ_GPIO 6
+#define PALMTT_MMC_WP_GPIO 8
+#define PALMTT_HDQ_GPIO 11
+
+#endif /* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
new file mode 100644
index 0000000..b1d7d57
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters : Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO 0
+#define PALMZ71_PENIRQ_GPIO 6
+#define PALMZ71_MMC_WP_GPIO 8
+#define PALMZ71_HDQ_GPIO 11
+
+#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
+
+#endif /* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
new file mode 100644
index 0000000..c06c3d7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-perseus2.h
+ *
+ * Copyright 2003 by Texas Instruments Incorporated
+ * OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <mach/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE D256M_1X16_4B
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
similarity index 100%
rename from include/asm-arm/arch-omap/board-sx1.h
rename to arch/arm/plat-omap/include/mach/board-sx1.h
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
similarity index 100%
rename from include/asm-arm/arch-omap/board-voiceblue.h
rename to arch/arm/plat-omap/include/mach/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 0000000..5444564
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/plat-omap/include/mach/board.h
+ *
+ * Information structures for board-specific data
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK 0x4f01
+#define OMAP_TAG_MMC 0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB 0x4f04
+#define OMAP_TAG_LCD 0x4f05
+#define OMAP_TAG_GPIO_SWITCH 0x4f06
+#define OMAP_TAG_UART 0x4f07
+#define OMAP_TAG_FBMEM 0x4f08
+#define OMAP_TAG_STI_CONSOLE 0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+
+#define OMAP_TAG_BOOT_REASON 0x4f80
+#define OMAP_TAG_FLASH_PART 0x4f81
+#define OMAP_TAG_VERSION_STR 0x4f82
+
+struct omap_clock_config {
+ /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+ u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+ unsigned enabled:1;
+ /* nomux means "standard" muxing is wrong on this board, and that
+ * board-specific code handled it before common init logic.
+ */
+ unsigned nomux:1;
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+ /* 4 wire signaling is optional, and is only used for SD/SDIO */
+ unsigned wire4:1;
+ s16 power_pin;
+ s16 switch_pin;
+ s16 wp_pin;
+};
+
+struct omap_mmc_config {
+ struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+ u8 console_uart;
+ u32 console_speed;
+};
+
+struct omap_sti_console_config {
+ unsigned enable:1;
+ u8 channel;
+};
+
+struct omap_camera_sensor_config {
+ u16 reset_gpio;
+ int (*power_on)(void * data);
+ int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+};
+
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+ int default_intensity;
+ int (*set_power)(struct device *dev, int state);
+ int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+ u32 start;
+ u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+ const char *name;
+ int intensity_timer;
+ int blink_timer;
+ void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+ char name[12];
+ u16 gpio;
+ int flags:4;
+ int type:4;
+ int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+ char part_table[0];
+};
+
+struct omap_boot_reason_config {
+ char reason_str[12];
+};
+
+struct omap_version_config {
+ char component[12];
+ char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+ u16 tag;
+ u16 len;
+ u8 data[0];
+};
+
+struct omap_board_config_kernel {
+ u16 tag;
+ const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+ ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+ ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 0000000..92f7c72
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/plat-omap/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+ u8 div;
+ u32 val;
+ u8 flags;
+};
+
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ u16 last_rounded_m;
+ u8 last_rounded_n;
+ unsigned long last_rounded_rate;
+ unsigned int rate_tolerance;
+ u16 max_multiplier;
+ u8 max_divider;
+ u32 max_tolerance;
+# if defined(CONFIG_ARCH_OMAP3)
+ u8 modes;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+ void __iomem *autoidle_reg;
+ u32 autoidle_mask;
+ void __iomem *idlest_reg;
+ u8 idlest_bit;
+# endif
+};
+
+#endif
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ int id;
+ struct clk *parent;
+ unsigned long rate;
+ __u32 flags;
+ void __iomem *enable_reg;
+ __u8 enable_bit;
+ __s8 usecount;
+ void (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ u8 fixed_div;
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+#else
+ __u8 rate_offset;
+ __u8 src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ struct clk * (*clk_get_parent)(struct clk *clk);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
+#define RATE_FIXED (1 << 1) /* Fixed clock rate */
+#define RATE_PROPAGATES (1 << 2) /* Program children too */
+#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */
+#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */
+#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL (1 << 7)
+#define CLOCK_NO_IDLE_PARENT (1 << 8)
+#define DELAYED_APP (1 << 9) /* Delay application of clock */
+#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
+#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310 (1 << 21)
+#define CLOCK_IN_OMAP730 (1 << 22)
+#define CLOCK_IN_OMAP1510 (1 << 23)
+#define CLOCK_IN_OMAP16XX (1 << 24)
+#define CLOCK_IN_OMAP242X (1 << 25)
+#define CLOCK_IN_OMAP243X (1 << 26)
+#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK (1 << 28)
+#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE (1 << 0)
+#define RATE_IN_242X (1 << 1)
+#define RATE_IN_243X (1 << 2)
+#define RATE_IN_343X (1 << 3) /* rates common to all 343X */
+#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K 0
+#define CORE_CLK_SRC_DPLL 1
+#define CORE_CLK_SRC_DPLL_X2 2
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
new file mode 100644
index 0000000..0609311
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+extern void omap_serial_init(void);
+#ifdef CONFIG_I2C_OMAP
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
new file mode 100644
index 0000000..e3fd62d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE 0x000
+#define OMAP2_CONTROL_PADCONFS 0x030
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_MEM_WKUP 0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file. Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK (0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK (1 << 5)
+#define OMAP2_SYSBOOT_4_MASK (1 << 4)
+#define OMAP2_SYSBOOT_3_MASK (1 << 3)
+#define OMAP2_SYSBOOT_2_MASK (1 << 2)
+#define OMAP2_SYSBOOT_1_MASK (1 << 1)
+#define OMAP2_SYSBOOT_0_MASK (1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_get() 0
+#define omap_ctrl_readb(x) 0
+#define omap_ctrl_readw(x) 0
+#define omap_ctrl_readl(x) 0
+#define omap_ctrl_writeb(x, y) WARN_ON(1)
+#define omap_ctrl_writew(x, y) WARN_ON(1)
+#define omap_ctrl_writel(x, y) WARN_ON(1)
+#endif
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 0000000..05aee0e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+ u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x) { .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+# error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx(): True for OMAP730
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
+ * cpu_is_omap343x(): True for OMAP3430
+ */
+#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap343x() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() 1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+# undef cpu_is_omap24xx
+# undef cpu_is_omap242x
+# undef cpu_is_omap243x
+# define cpu_is_omap24xx() is_omap24xx()
+# define cpu_is_omap242x() is_omap242x()
+# define cpu_is_omap243x() is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap34xx
+# undef cpu_is_omap343x
+# define cpu_is_omap34xx() is_omap34xx()
+# define cpu_is_omap343x() is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap34xx
+# define cpu_is_omap34xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+# undef cpu_is_omap343x
+# define cpu_is_omap343x() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330(): True for OMAP330
+ * cpu_is_omap730(): True for OMAP730
+ * cpu_is_omap1510(): True for OMAP1510
+ * cpu_is_omap1610(): True for OMAP1610
+ * cpu_is_omap1611(): True for OMAP1611
+ * cpu_is_omap5912(): True for OMAP5912
+ * cpu_is_omap1621(): True for OMAP1621
+ * cpu_is_omap1710(): True for OMAP1710
+ * cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
+ * cpu_is_omap3430(): True for OMAP3430
+ */
+#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310() 0
+#define cpu_is_omap730() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap5912() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap3430() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() 1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap1610
+# undef cpu_is_omap1611
+# undef cpu_is_omap5912
+# undef cpu_is_omap1621
+# undef cpu_is_omap1710
+# define cpu_is_omap1610() is_omap1610()
+# define cpu_is_omap1611() is_omap1611()
+# define cpu_is_omap5912() is_omap5912()
+# define cpu_is_omap1621() is_omap1621()
+# define cpu_is_omap1710() is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430() is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \
+ cpu_is_omap16xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than: true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to: true if passed cpu type & its rev is equal.
+ * get_sil_rev: return the silicon rev value.
+ */
+#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+ ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+ (get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+ ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+ (get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+ ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+ (get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+ get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0 0x24200000
+#define OMAP2420_REV_ES2_0 0x24201000
+#define OMAP2430_REV_ES1_0 0x24300000
+#define OMAP3430_REV_ES1_0 0x34300000
+#define OMAP3430_REV_ES2_0 0x34301000
+#define OMAP3430_REV_ES2_1 0x34302000
+#define OMAP3430_REV_ES2_2 0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST 0
+#define DEVICE_TYPE_EMU 1
+#define DEVICE_TYPE_SEC 2
+#define DEVICE_TYPE_GP 3
+#define DEVICE_TYPE_BAD 4
+
+#define get_device_type() ((system_rev & 0x700) >> 8)
+#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 0000000..1b0039b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+ moveq \rx, #0xff000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ orr \rx, \rx, #0x00009000 @ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+ orr \rx, \rx, #0x00000800 @ UART 2 & 3
+#endif
+
+#elif CONFIG_ARCH_OMAP2
+ moveq \rx, #0x48000000 @ physical base address
+ movne \rx, #0xd8000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rx, \rx, #0x00004000 @ UART 3
+#endif
+#endif
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
+ and \rd, \rd, #0x60
+ teq \rd, #0x60
+ beq 1002f
+ ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
+ and \rd, \rd, #0x60
+ teq \rd, #0x60
+ bne 1001b
+1002:
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 0000000..54fe966
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ * arch/arm/plat-omap/include/mach/dma.h
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE (0xfffed800)
+
+#define OMAP1_DMA_GCR 0x400
+#define OMAP1_DMA_GSCR 0x404
+#define OMAP1_DMA_GRST 0x408
+#define OMAP1_DMA_HW_ID 0x442
+#define OMAP1_DMA_PCH2_ID 0x444
+#define OMAP1_DMA_PCH0_ID 0x446
+#define OMAP1_DMA_PCH1_ID 0x448
+#define OMAP1_DMA_PCHG_ID 0x44a
+#define OMAP1_DMA_PCHD_ID 0x44c
+#define OMAP1_DMA_CAPS_0_U 0x44e
+#define OMAP1_DMA_CAPS_0_L 0x450
+#define OMAP1_DMA_CAPS_1_U 0x452
+#define OMAP1_DMA_CAPS_1_L 0x454
+#define OMAP1_DMA_CAPS_2 0x456
+#define OMAP1_DMA_CAPS_3 0x458
+#define OMAP1_DMA_CAPS_4 0x45a
+#define OMAP1_DMA_PCH2_SR 0x460
+#define OMAP1_DMA_PCH0_SR 0x480
+#define OMAP1_DMA_PCH1_SR 0x482
+#define OMAP1_DMA_PCHD_SR 0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION 0x00
+#define OMAP_DMA4_GCR 0x78
+#define OMAP_DMA4_IRQSTATUS_L0 0x08
+#define OMAP_DMA4_IRQSTATUS_L1 0x0c
+#define OMAP_DMA4_IRQSTATUS_L2 0x10
+#define OMAP_DMA4_IRQSTATUS_L3 0x14
+#define OMAP_DMA4_IRQENABLE_L0 0x18
+#define OMAP_DMA4_IRQENABLE_L1 0x1c
+#define OMAP_DMA4_IRQENABLE_L2 0x20
+#define OMAP_DMA4_IRQENABLE_L3 0x24
+#define OMAP_DMA4_SYSSTATUS 0x28
+#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
+#define OMAP_DMA4_CAPS_0 0x64
+#define OMAP_DMA4_CAPS_2 0x6c
+#define OMAP_DMA4_CAPS_3 0x70
+#define OMAP_DMA4_CAPS_4 0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT 17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
+#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
+#define OMAP1_DMA_CCEN(n) 0
+#define OMAP1_DMA_CCFN(n) 0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION 0
+#define OMAP1_DMA_IRQSTATUS_L0 0
+#define OMAP1_DMA_IRQENABLE_L0 0
+#define OMAP1_DMA_OCP_SYSCONFIG 0
+#define OMAP_DMA4_HW_ID 0
+#define OMAP_DMA4_CAPS_0_L 0
+#define OMAP_DMA4_CAPS_0_U 0
+#define OMAP_DMA4_CAPS_1_L 0
+#define OMAP_DMA4_CAPS_1_U 0
+#define OMAP_DMA4_GSCR 0
+#define OMAP_DMA4_CPC(n) 0
+
+#define OMAP_DMA4_LCH_CTRL(n) 0
+#define OMAP_DMA4_COLOR_L(n) 0
+#define OMAP_DMA4_COLOR_U(n) 0
+#define OMAP_DMA4_CCR2(n) 0
+#define OMAP1_DMA_CSSA(n) 0
+#define OMAP1_DMA_CDSA(n) 0
+#define OMAP_DMA4_CSSA_L(n) 0
+#define OMAP_DMA4_CSSA_U(n) 0
+#define OMAP_DMA4_CDSA_L(n) 0
+#define OMAP_DMA4_CDSA_U(n) 0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE 0
+#define OMAP_DMA_MCSI1_TX 1
+#define OMAP_DMA_MCSI1_RX 2
+#define OMAP_DMA_I2C_RX 3
+#define OMAP_DMA_I2C_TX 4
+#define OMAP_DMA_EXT_NDMA_REQ 5
+#define OMAP_DMA_EXT_NDMA_REQ2 6
+#define OMAP_DMA_UWIRE_TX 7
+#define OMAP_DMA_MCBSP1_TX 8
+#define OMAP_DMA_MCBSP1_RX 9
+#define OMAP_DMA_MCBSP3_TX 10
+#define OMAP_DMA_MCBSP3_RX 11
+#define OMAP_DMA_UART1_TX 12
+#define OMAP_DMA_UART1_RX 13
+#define OMAP_DMA_UART2_TX 14
+#define OMAP_DMA_UART2_RX 15
+#define OMAP_DMA_MCBSP2_TX 16
+#define OMAP_DMA_MCBSP2_RX 17
+#define OMAP_DMA_UART3_TX 18
+#define OMAP_DMA_UART3_RX 19
+#define OMAP_DMA_CAMERA_IF_RX 20
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_NAND 23
+#define OMAP_DMA_IRQ_LCD_LINE 24
+#define OMAP_DMA_MEMORY_STICK 25
+#define OMAP_DMA_USB_W2FC_RX0 26
+#define OMAP_DMA_USB_W2FC_RX1 27
+#define OMAP_DMA_USB_W2FC_RX2 28
+#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_TX1 30
+#define OMAP_DMA_USB_W2FC_TX2 31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN 32
+#define OMAP_DMA_SPI_TX 33
+#define OMAP_DMA_SPI_RX 34
+#define OMAP_DMA_CRYPTO_HASH 35
+#define OMAP_DMA_CCP_ATTN 36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+#define OMAP_DMA_CRYPTO_DES_OUT 56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE (0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE (0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ (1 << 0)
+#define OMAP_DMA_DROP_IRQ (1 << 1)
+#define OMAP_DMA_HALF_IRQ (1 << 2)
+#define OMAP_DMA_FRAME_IRQ (1 << 3)
+#define OMAP_DMA_LAST_IRQ (1 << 4)
+#define OMAP_DMA_BLOCK_IRQ (1 << 5)
+#define OMAP1_DMA_SYNC_IRQ (1 << 6)
+#define OMAP2_DMA_PKT_IRQ (1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8 0x00
+#define OMAP_DMA_DATA_TYPE_S16 0x01
+#define OMAP_DMA_DATA_TYPE_S32 0x02
+
+#define OMAP_DMA_SYNC_ELEMENT 0x00
+#define OMAP_DMA_SYNC_FRAME 0x01
+#define OMAP_DMA_SYNC_BLOCK 0x02
+#define OMAP_DMA_SYNC_PACKET 0x03
+
+#define OMAP_DMA_SRC_SYNC 0x01
+#define OMAP_DMA_DST_SYNC 0x00
+
+#define OMAP_DMA_PORT_EMIFF 0x00
+#define OMAP_DMA_PORT_EMIFS 0x01
+#define OMAP_DMA_PORT_OCP_T1 0x02
+#define OMAP_DMA_PORT_TIPB 0x03
+#define OMAP_DMA_PORT_OCP_T2 0x04
+#define OMAP_DMA_PORT_MPUI 0x05
+
+#define OMAP_DMA_AMODE_CONSTANT 0x00
+#define OMAP_DMA_AMODE_POST_INC 0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX 0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH 0x10
+#define DMA_DEFAULT_ARB_RATE 0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET (0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT (0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET (0x03 << 12)
+#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75 (0x01 << 14)
+#define DMA_THREAD_FIFO_25 (0x02 << 14)
+#define DMA_THREAD_FIFO_50 (0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN 0x1
+#define OMAP_DMA_DYNAMIC_CHAIN 0x2
+#define OMAP_DMA_CHAIN_ACTIVE 0x1
+#define OMAP_DMA_CHAIN_INACTIVE 0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH 0x1
+#define DMA_CH_PRIO_LOW 0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+ OMAP_LCD_DMA_B1_TOP,
+ OMAP_LCD_DMA_B1_BOTTOM,
+ OMAP_LCD_DMA_B2_TOP,
+ OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+ OMAP_DMA_DATA_BURST_DIS = 0,
+ OMAP_DMA_DATA_BURST_4,
+ OMAP_DMA_DATA_BURST_8,
+ OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+ OMAP_DMA_LITTLE_ENDIAN = 0,
+ OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+ OMAP_DMA_COLOR_DIS = 0,
+ OMAP_DMA_CONSTANT_FILL,
+ OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+ OMAP_DMA_WRITE_NON_POSTED = 0,
+ OMAP_DMA_WRITE_POSTED,
+ OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+ OMAP_DMA_LCH_2D = 0,
+ OMAP_DMA_LCH_G,
+ OMAP_DMA_LCH_P,
+ OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+ int data_type; /* data type 8,16,32 */
+ int elem_count; /* number of elements in a frame */
+ int frame_count; /* number of frames in a element */
+
+ int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int src_amode; /* constant, post increment, indexed,
+ double indexed */
+ unsigned long src_start; /* source address : physical */
+ int src_ei; /* source element index */
+ int src_fi; /* source frame index */
+
+ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int dst_amode; /* constant, post increment, indexed,
+ double indexed */
+ unsigned long dst_start; /* source address : physical */
+ int dst_ei; /* source element index */
+ int dst_fi; /* source frame index */
+
+ int trigger; /* trigger attached if the channel is
+ synchronized */
+ int sync_mode; /* sycn on element, frame , block or packet */
+ int src_or_dst_synch; /* source synch(1) or destination synch(0) */
+
+ int ie; /* interrupt enabled */
+
+ unsigned char read_prio;/* read priority */
+ unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+ enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+ int elem_count, int frame_count,
+ int sync_mode,
+ int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+ u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+ unsigned long src_start,
+ int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+ enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+ unsigned long dest_start,
+ int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+ enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+ struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+ int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+ unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+ void (*callback) (int chain_id, u16 ch_status,
+ void *data),
+ int *chain_id, int no_of_chans,
+ int chain_mode,
+ struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+ int dest_start, int elem_count,
+ int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+ struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+ void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+ int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
new file mode 100644
index 0000000..6dc70313
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK 0x00
+#define OMAP_TIMER_SRC_32_KHZ 0x01
+#define OMAP_TIMER_SRC_EXT_CLK 0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE (1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
+#define OMAP_TIMER_INT_MATCH (1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE 0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
+
+struct omap_dm_timer;
+struct clk;
+
+int omap_dm_timer_init(void);
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
similarity index 100%
rename from include/asm-arm/arch-omap/dsp_common.h
rename to arch/arm/plat-omap/include/mach/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
new file mode 100644
index 0000000..9e62cf0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/plat-omap/include/mach2/eac.h
+ *
+ * Defines for Enhanced Audio Controller
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
+#define __ASM_ARM_ARCH_OMAP2_EAC_H
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <sound/core.h>
+
+/* master codec clock source */
+#define EAC_MCLK_EXT_MASK 0x100
+enum eac_mclk_src {
+ EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
+ EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
+ EAC_MCLK_EXT_12288000,
+ EAC_MCLK_EXT_2x11289600,
+ EAC_MCLK_EXT_2x12288000,
+};
+
+/* codec port interface mode */
+enum eac_codec_mode {
+ EAC_CODEC_PCM,
+ EAC_CODEC_AC97,
+ EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
+ EAC_CODEC_I2S_SLAVE,
+};
+
+/* configuration structure for I2S mode */
+struct eac_i2s_conf {
+ /* if enabled, then first data slot (left channel) is signaled as
+ * positive level of frame sync EAC.AC_FS */
+ unsigned polarity_changed_mode:1;
+ /* if enabled, then serial data starts one clock cycle after the
+ * of EAC.AC_FS for first audio slot */
+ unsigned sync_delay_enable:1;
+};
+
+/* configuration structure for EAC codec port */
+struct eac_codec {
+ enum eac_mclk_src mclk_src;
+
+ enum eac_codec_mode codec_mode;
+ union {
+ struct eac_i2s_conf i2s;
+ } codec_conf;
+
+ int default_rate; /* audio sampling rate */
+
+ int (* set_power)(void *private_data, int dac, int adc);
+ int (* register_controls)(void *private_data,
+ struct snd_card *card);
+ const char *short_name;
+
+ void *private_data;
+};
+
+/* structure for passing platform dependent data to the EAC driver */
+struct eac_platform_data {
+ int (* init)(struct device *eac_dev);
+ void (* cleanup)(struct device *eac_dev);
+ /* these callbacks are used to configure & control external MCLK
+ * source. NULL if not used */
+ int (* enable_ext_clocks)(struct device *eac_dev);
+ void (* disable_ext_clocks)(struct device *eac_dev);
+};
+
+extern void omap_init_eac(struct eac_platform_data *pdata);
+
+extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
+extern void eac_unregister_codec(struct device *eac_dev);
+
+extern int eac_set_mode(struct device *eac_dev, int play, int rec);
+
+#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 0000000..d4e9043
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ INT_1510_IH2_IRQ
+#endif
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
+ ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+ ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
+ mov \irqstat, #0xffffffff
+ bic \tmp, \irqstat, \tmp
+ tst \irqnr, \tmp
+ beq 1510f
+
+ ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+ cmp \irqnr, #0
+ ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+ cmpeq \irqnr, #INT_IH2_IRQ
+ ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
+ ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+ addeqs \irqnr, \irqnr, #32
+1510:
+ .endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP2_VA_IC_BASE
+ ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+ cmp \irqnr, #0x0
+ bne 2222f
+ ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+ cmp \irqnr, #0x0
+ bne 2222f
+ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+ cmp \irqnr, #0x0
+2222:
+ ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
+
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 0000000..c92e4b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq() (0)
+#endif
+
+#define fpga_read(reg) __raw_readb(reg)
+#define fpga_write(val, reg) __raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
similarity index 100%
rename from include/asm-arm/arch-omap/gpio-switch.h
rename to arch/arm/plat-omap/include/mach/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 0000000..94ce278
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH 0x00
+#define OMAP_MPUIO_OUTPUT 0x02
+#define OMAP_MPUIO_IO_CNTL 0x04
+#define OMAP_MPUIO_KBR_LATCH 0x08
+#define OMAP_MPUIO_KBC 0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e
+#define OMAP_MPUIO_KBD_INT 0x10
+#define OMAP_MPUIO_GPIO_INT 0x12
+#define OMAP_MPUIO_KBD_MASKIT 0x14
+#define OMAP_MPUIO_GPIO_MASKIT 0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18
+#define OMAP_MPUIO_LATCH 0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH 0x00
+#define OMAP_MPUIO_OUTPUT 0x04
+#define OMAP_MPUIO_IO_CNTL 0x08
+#define OMAP_MPUIO_KBR_LATCH 0x10
+#define OMAP_MPUIO_KBC 0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
+#define OMAP_MPUIO_KBD_INT 0x20
+#define OMAP_MPUIO_GPIO_INT 0x24
+#define OMAP_MPUIO_KBD_MASKIT 0x28
+#define OMAP_MPUIO_GPIO_MASKIT 0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
+#define OMAP_MPUIO_LATCH 0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS 6
+
+#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
+ IH_MPUIO_BASE + ((nr) & 0x0f) : \
+ IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void); /* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+ return OMAP_GPIO_IRQ(gpio);
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+ return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+ return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
new file mode 100644
index 0000000..90444a0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+#ifdef CONFIG_GPIOEXPANDER_OMAP
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+ return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+ return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
similarity index 100%
rename from include/asm-arm/arch-omap/gpmc.h
rename to arch/arm/plat-omap/include/mach/gpmc.h
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 0000000..07f5d7f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ * file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ * files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE (0xfffec700)
+#define MPU_TIMER_FREE (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
+#define MPU_TIMER_AR (1 << 1)
+#define MPU_TIMER_ST (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE (0xfffece00)
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE (0xe1008000)
+#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE (0xfffe0800)
+#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
+# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
+# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
+# define SOFT_UDC_REQ (1 << 4)
+# define SOFT_USB_CLK_REQ (1 << 3)
+# define SOFT_DPLL_REQ (1 << 0)
+#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
+# define DIS_MMC2_DPLL_REQ (1 << 11)
+# define DIS_MMC1_DPLL_REQ (1 << 10)
+# define DIS_UART3_DPLL_REQ (1 << 9)
+# define DIS_UART2_DPLL_REQ (1 << 8)
+# define DIS_UART1_DPLL_REQ (1 << 7)
+# define DIS_USB_HOST_DPLL_REQ (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
+#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+
+#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET 0x00
+#define IRQ_MIR_REG_OFFSET 0x04
+#define IRQ_SIR_IRQ_REG_OFFSET 0x10
+#define IRQ_SIR_FIQ_REG_OFFSET 0x14
+#define IRQ_CONTROL_REG_OFFSET 0x18
+#define IRQ_ISR_REG_OFFSET 0x9c
+#define IRQ_ILR0_REG_OFFSET 0x1c
+#define IRQ_GMR_REG_OFFSET 0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0 0xfffe1080
+#define MOD_CONF_CTRL_1 0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define PULL_DWN_CTRL_4 0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E 0xfffe1090
+#define FUNC_MUX_CTRL_F 0xfffe1094
+#define FUNC_MUX_CTRL_10 0xfffe1098
+#define FUNC_MUX_CTRL_11 0xfffe109c
+#define FUNC_MUX_CTRL_12 0xfffe10a0
+#define PU_PD_SEL_0 0xfffe10b4
+#define PU_PD_SEL_1 0xfffe10b8
+#define PU_PD_SEL_2 0xfffe10bc
+#define PU_PD_SEL_3 0xfffe10c0
+#define PU_PD_SEL_4 0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE 0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE (0xfffec900)
+#define MPUI_CTRL (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE 0xfffbd000
+#define OMAP_LPG2_BASE 0xfffbd800
+#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE 0xfffb5800
+#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
similarity index 100%
rename from include/asm-arm/arch-omap/hwa742.h
rename to arch/arm/plat-omap/include/mach/hwa742.h
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 0000000..2a30b7d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a) (a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE 0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS 0xFFFB0000
+#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define IO_SIZE 0x40000
+#define IO_VIRT (IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define io_p2v(pa) ((pa) - IO_OFFSET)
+#define io_v2p(va) ((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
+#define L3_24XX_VIRT 0xf8000000
+#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
+#define L4_24XX_VIRT 0xd8000000
+#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
+#define L4_WK_243X_VIRT 0xd9000000
+#define L4_WK_243X_SIZE SZ_1M
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
+#define OMAP243X_GPMC_VIRT 0xFE000000
+#define OMAP243X_GPMC_SIZE SZ_1M
+#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT 0xFD000000
+#define OMAP243X_SDRC_SIZE SZ_1M
+#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT 0xFC000000
+#define OMAP243X_SMS_SIZE SZ_1M
+
+#endif
+
+#define IO_OFFSET 0x90000000
+#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
+#define DSP_MEM_24XX_VIRT 0xe0000000
+#define DSP_MEM_24XX_SIZE 0x28000
+#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */
+#define DSP_IPI_24XX_VIRT 0xe1000000
+#define DSP_IPI_24XX_SIZE SZ_4K
+#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT 0xe2000000
+#define DSP_MMU_24XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
+#define L3_34XX_VIRT 0xf8000000
+#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
+#define L4_34XX_VIRT 0xd8000000
+#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT 0xd8300000
+#define L4_WK_34XX_SIZE SZ_1M
+
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT 0xd9000000
+#define L4_PER_34XX_SIZE SZ_1M
+
+#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT 0xe4000000
+#define L4_EMU_34XX_SIZE SZ_64M
+
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT 0xFE000000
+#define OMAP34XX_GPMC_SIZE SZ_1M
+
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT 0xFC000000
+#define OMAP343X_SMS_SIZE SZ_1M
+
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT 0xFD000000
+#define OMAP343X_SDRC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
+#define DSP_MEM_34XX_VIRT 0xe0000000
+#define DSP_MEM_34XX_SIZE 0x28000
+#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
+#define DSP_IPI_34XX_VIRT 0xe1000000
+#define DSP_IPI_34XX_SIZE SZ_4K
+#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT 0xe2000000
+#define DSP_MMU_34XX_SIZE SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ * - Use __raw_read/write[bwl]() for virtual register addresses
+ * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ * - DO NOT use hardcoded virtual addresses to allow changing the
+ * IO address space again if needed
+ */
+#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
+#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 0000000..8372a00
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/plat-omap/include/mach/irda.h
+ *
+ * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL 1 /* Selects IrDA */
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+#define IR_MIRMODE 8
+
+struct omap_irda_config {
+ int transceiver_cap;
+ int (*transceiver_mode)(struct device *dev, int mode);
+ int (*select_irda)(struct device *dev, int state);
+ /* Very specific to the needs of some platforms (h3,h4)
+ * having calls which can sleep in irda_set_speed.
+ */
+ struct delayed_work gpio_expa;
+ int rx_channel;
+ int tx_channel;
+ unsigned long dest_start;
+ unsigned long src_start;
+ int tx_trigger;
+ int rx_trigger;
+ int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 0000000..17248bb
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ * arch/arm/plat-omap/include/mach/irqs.h
+ *
+ * Copyright (C) Greg Lonnon 2001
+ * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ * are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA 1
+#define INT_FIQ 3
+#define INT_RTDX 6
+#define INT_DSP_MMU_ABORT 7
+#define INT_HOST 8
+#define INT_ABORT 9
+#define INT_BRIDGE_PRIV 13
+#define INT_GPIO_BANK1 14
+#define INT_UART3 15
+#define INT_TIMER3 16
+#define INT_DMA_CH0_6 19
+#define INT_DMA_CH1_7 20
+#define INT_DMA_CH2_8 21
+#define INT_DMA_CH3 22
+#define INT_DMA_CH4 23
+#define INT_DMA_CH5 24
+#define INT_DMA_LCD 25
+#define INT_TIMER1 26
+#define INT_WD_TIMER 27
+#define INT_BRIDGE_PUB 28
+#define INT_TIMER2 30
+#define INT_LCD_CTRL 31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ 0
+#define INT_1510_RES2 2
+#define INT_1510_SPI_TX 4
+#define INT_1510_SPI_RX 5
+#define INT_1510_DSP_MAILBOX1 10
+#define INT_1510_DSP_MAILBOX2 11
+#define INT_1510_RES12 12
+#define INT_1510_LB_MMU 17
+#define INT_1510_RES18 18
+#define INT_1510_LOCAL_BUS 29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ 0
+#define INT_1610_IH2_FIQ 2
+#define INT_1610_McBSP2_TX 4
+#define INT_1610_McBSP2_RX 5
+#define INT_1610_DSP_MAILBOX1 10
+#define INT_1610_DSP_MAILBOX2 11
+#define INT_1610_LCD_LINE 12
+#define INT_1610_GPTIMER1 17
+#define INT_1610_GPTIMER2 18
+#define INT_1610_SSR_FIFO_0 29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ 0
+#define INT_730_IH2_IRQ 1
+#define INT_730_USB_NON_ISO 2
+#define INT_730_USB_ISO 3
+#define INT_730_ICR 4
+#define INT_730_EAC 5
+#define INT_730_GPIO_BANK1 6
+#define INT_730_GPIO_BANK2 7
+#define INT_730_GPIO_BANK3 8
+#define INT_730_McBSP2TX 10
+#define INT_730_McBSP2RX 11
+#define INT_730_McBSP2RX_OVF 12
+#define INT_730_LCD_LINE 14
+#define INT_730_GSM_PROTECT 15
+#define INT_730_TIMER3 16
+#define INT_730_GPIO_BANK5 17
+#define INT_730_GPIO_BANK6 18
+#define INT_730_SPGIO_WR 29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE 32
+
+#define INT_KEYBOARD (1 + IH2_BASE)
+#define INT_uWireTX (2 + IH2_BASE)
+#define INT_uWireRX (3 + IH2_BASE)
+#define INT_I2C (4 + IH2_BASE)
+#define INT_MPUIO (5 + IH2_BASE)
+#define INT_USB_HHC_1 (6 + IH2_BASE)
+#define INT_McBSP3TX (10 + IH2_BASE)
+#define INT_McBSP3RX (11 + IH2_BASE)
+#define INT_McBSP1TX (12 + IH2_BASE)
+#define INT_McBSP1RX (13 + IH2_BASE)
+#define INT_UART1 (14 + IH2_BASE)
+#define INT_UART2 (15 + IH2_BASE)
+#define INT_BT_MCSI1TX (16 + IH2_BASE)
+#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_USB_W2FC (20 + IH2_BASE)
+#define INT_1WIRE (21 + IH2_BASE)
+#define INT_OS_TIMER (22 + IH2_BASE)
+#define INT_MMC (23 + IH2_BASE)
+#define INT_GAUGE_32K (24 + IH2_BASE)
+#define INT_RTC_TIMER (25 + IH2_BASE)
+#define INT_RTC_ALARM (26 + IH2_BASE)
+#define INT_MEM_STICK (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
+#define INT_1610_USB_OTG (8 + IH2_BASE)
+#define INT_1610_SoSSI (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
+#define INT_1610_DSP_MMU (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
+#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
+#define INT_1610_SPI (49 + IH2_BASE)
+#define INT_1610_DMA_CH6 (53 + IH2_BASE)
+#define INT_1610_DMA_CH7 (54 + IH2_BASE)
+#define INT_1610_DMA_CH8 (55 + IH2_BASE)
+#define INT_1610_DMA_CH9 (56 + IH2_BASE)
+#define INT_1610_DMA_CH10 (57 + IH2_BASE)
+#define INT_1610_DMA_CH11 (58 + IH2_BASE)
+#define INT_1610_DMA_CH12 (59 + IH2_BASE)
+#define INT_1610_DMA_CH13 (60 + IH2_BASE)
+#define INT_1610_DMA_CH14 (61 + IH2_BASE)
+#define INT_1610_DMA_CH15 (62 + IH2_BASE)
+#define INT_1610_NAND (63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS (0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_730_CFCD (2 + IH2_BASE)
+#define INT_730_CFIREQ (3 + IH2_BASE)
+#define INT_730_I2C (4 + IH2_BASE)
+#define INT_730_PCC (5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_730_SPI_100K_1 (7 + IH2_BASE)
+#define INT_730_SYREN_SPI (8 + IH2_BASE)
+#define INT_730_VLYNQ (9 + IH2_BASE)
+#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_730_McBSP1TX (11 + IH2_BASE)
+#define INT_730_McBSP1RX (12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_730_MCSI (16 + IH2_BASE)
+#define INT_730_uWireTX (17 + IH2_BASE)
+#define INT_730_uWireRX (18 + IH2_BASE)
+#define INT_730_SMC_CD (19 + IH2_BASE)
+#define INT_730_SMC_IREQ (20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_730_TIMER32K (22 + IH2_BASE)
+#define INT_730_MMC_SDIO (23 + IH2_BASE)
+#define INT_730_UPLD (24 + IH2_BASE)
+#define INT_730_USB_HHC_1 (27 + IH2_BASE)
+#define INT_730_USB_HHC_2 (28 + IH2_BASE)
+#define INT_730_USB_GENI (29 + IH2_BASE)
+#define INT_730_USB_OTG (30 + IH2_BASE)
+#define INT_730_CAMERA_IF (31 + IH2_BASE)
+#define INT_730_RNG (32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN (34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_730_SHA1_MD5 (36 + IH2_BASE)
+#define INT_730_SPI_100K_2 (37 + IH2_BASE)
+#define INT_730_RNG_IDLE (38 + IH2_BASE)
+#define INT_730_MPUIO (39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_730_DMA_CH6 (53 + IH2_BASE)
+#define INT_730_DMA_CH7 (54 + IH2_BASE)
+#define INT_730_DMA_CH8 (55 + IH2_BASE)
+#define INT_730_DMA_CH9 (56 + IH2_BASE)
+#define INT_730_DMA_CH10 (57 + IH2_BASE)
+#define INT_730_DMA_CH11 (58 + IH2_BASE)
+#define INT_730_DMA_CH12 (59 + IH2_BASE)
+#define INT_730_DMA_CH13 (60 + IH2_BASE)
+#define INT_730_DMA_CH14 (61 + IH2_BASE)
+#define INT_730_DMA_CH15 (62 + IH2_BASE)
+#define INT_730_NAND (63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ 7
+#define INT_24XX_SDMA_IRQ0 12
+#define INT_24XX_SDMA_IRQ1 13
+#define INT_24XX_SDMA_IRQ2 14
+#define INT_24XX_SDMA_IRQ3 15
+#define INT_24XX_CAM_IRQ 24
+#define INT_24XX_DSS_IRQ 25
+#define INT_24XX_MAIL_U0_MPU 26
+#define INT_24XX_DSP_UMA 27
+#define INT_24XX_DSP_MMU 28
+#define INT_24XX_GPIO_BANK1 29
+#define INT_24XX_GPIO_BANK2 30
+#define INT_24XX_GPIO_BANK3 31
+#define INT_24XX_GPIO_BANK4 32
+#define INT_24XX_GPIO_BANK5 33
+#define INT_24XX_MAIL_U3_MPU 34
+#define INT_24XX_GPTIMER1 37
+#define INT_24XX_GPTIMER2 38
+#define INT_24XX_GPTIMER3 39
+#define INT_24XX_GPTIMER4 40
+#define INT_24XX_GPTIMER5 41
+#define INT_24XX_GPTIMER6 42
+#define INT_24XX_GPTIMER7 43
+#define INT_24XX_GPTIMER8 44
+#define INT_24XX_GPTIMER9 45
+#define INT_24XX_GPTIMER10 46
+#define INT_24XX_GPTIMER11 47
+#define INT_24XX_GPTIMER12 48
+#define INT_24XX_I2C1_IRQ 56
+#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_MCBSP1_IRQ_TX 59
+#define INT_24XX_MCBSP1_IRQ_RX 60
+#define INT_24XX_MCBSP2_IRQ_TX 62
+#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_UART1_IRQ 72
+#define INT_24XX_UART2_IRQ 73
+#define INT_24XX_UART3_IRQ 74
+#define INT_24XX_USB_IRQ_GEN 75
+#define INT_24XX_USB_IRQ_NISO 76
+#define INT_24XX_USB_IRQ_ISO 77
+#define INT_24XX_USB_IRQ_HGEN 78
+#define INT_24XX_USB_IRQ_HSOF 79
+#define INT_24XX_USB_IRQ_OTG 80
+#define INT_24XX_MMC_IRQ 83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES 192
+#define IH_GPIO_BASE (128 + IH2_BASE)
+#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
+#else
+#define TWL4030_BASE_NR_IRQS 0
+#define TWL4030_PWR_NR_IRQS 0
+#endif
+#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
+#ifdef CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS 18
+#else
+#define TWL4030_GPIO_NR_IRQS 0
+#endif
+#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
new file mode 100644
index 0000000..232923a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/keypad.h
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+ int rows;
+ int cols;
+ int *keymap;
+ unsigned int keymapsize;
+ unsigned int rep:1;
+ unsigned long delay;
+ unsigned int dbounce:1;
+ /* specific to OMAP242x*/
+ unsigned int *row_gpios;
+ unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0 (0 << 16)
+#define GROUP_1 (1 << 16)
+#define GROUP_2 (2 << 16)
+#define GROUP_3 (3 << 16)
+#define GROUP_MASK GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
similarity index 100%
rename from include/asm-arm/arch-omap/lcd_mipid.h
rename to arch/arm/plat-omap/include/mach/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h
new file mode 100644
index 0000000..25e451e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/led.h
+ *
+ * Copyright (C) 2006 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+ struct led_classdev cdev;
+ s16 gpio;
+};
+
+struct omap_led_platform_data {
+ s16 nr_leds;
+ struct omap_led_config *leds;
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
similarity index 100%
rename from include/asm-arm/arch-omap/mailbox.h
rename to arch/arm/plat-omap/include/mach/mailbox.h
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
new file mode 100644
index 0000000..6eb44a9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -0,0 +1,380 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define OMAP730_MCBSP1_BASE 0xfffb1000
+#define OMAP730_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE 0x48074000
+#define OMAP24XX_MCBSP2_BASE 0x48076000
+
+#define OMAP34XX_MCBSP1_BASE 0x48074000
+#define OMAP34XX_MCBSP2_BASE 0x49022000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+#define OMAP_MCBSP_REG_DRR2 0x00
+#define OMAP_MCBSP_REG_DRR1 0x02
+#define OMAP_MCBSP_REG_DXR2 0x04
+#define OMAP_MCBSP_REG_DXR1 0x06
+#define OMAP_MCBSP_REG_SPCR2 0x08
+#define OMAP_MCBSP_REG_SPCR1 0x0a
+#define OMAP_MCBSP_REG_RCR2 0x0c
+#define OMAP_MCBSP_REG_RCR1 0x0e
+#define OMAP_MCBSP_REG_XCR2 0x10
+#define OMAP_MCBSP_REG_XCR1 0x12
+#define OMAP_MCBSP_REG_SRGR2 0x14
+#define OMAP_MCBSP_REG_SRGR1 0x16
+#define OMAP_MCBSP_REG_MCR2 0x18
+#define OMAP_MCBSP_REG_MCR1 0x1a
+#define OMAP_MCBSP_REG_RCERA 0x1c
+#define OMAP_MCBSP_REG_RCERB 0x1e
+#define OMAP_MCBSP_REG_XCERA 0x20
+#define OMAP_MCBSP_REG_XCERB 0x22
+#define OMAP_MCBSP_REG_PCR0 0x24
+#define OMAP_MCBSP_REG_RCERC 0x26
+#define OMAP_MCBSP_REG_RCERD 0x28
+#define OMAP_MCBSP_REG_XCERC 0x2A
+#define OMAP_MCBSP_REG_XCERD 0x2C
+#define OMAP_MCBSP_REG_RCERE 0x2E
+#define OMAP_MCBSP_REG_RCERF 0x30
+#define OMAP_MCBSP_REG_XCERE 0x32
+#define OMAP_MCBSP_REG_XCERF 0x34
+#define OMAP_MCBSP_REG_RCERG 0x36
+#define OMAP_MCBSP_REG_RCERH 0x38
+#define OMAP_MCBSP_REG_XCERG 0x3A
+#define OMAP_MCBSP_REG_XCERH 0x3C
+
+#define OMAP_MAX_MCBSP_COUNT 3
+#define MAX_MCBSP_CLOCKS 3
+
+#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP OMAP_MCBSP1
+#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2 0x00
+#define OMAP_MCBSP_REG_DRR1 0x04
+#define OMAP_MCBSP_REG_DXR2 0x08
+#define OMAP_MCBSP_REG_DXR1 0x0C
+#define OMAP_MCBSP_REG_SPCR2 0x10
+#define OMAP_MCBSP_REG_SPCR1 0x14
+#define OMAP_MCBSP_REG_RCR2 0x18
+#define OMAP_MCBSP_REG_RCR1 0x1C
+#define OMAP_MCBSP_REG_XCR2 0x20
+#define OMAP_MCBSP_REG_XCR1 0x24
+#define OMAP_MCBSP_REG_SRGR2 0x28
+#define OMAP_MCBSP_REG_SRGR1 0x2C
+#define OMAP_MCBSP_REG_MCR2 0x30
+#define OMAP_MCBSP_REG_MCR1 0x34
+#define OMAP_MCBSP_REG_RCERA 0x38
+#define OMAP_MCBSP_REG_RCERB 0x3C
+#define OMAP_MCBSP_REG_XCERA 0x40
+#define OMAP_MCBSP_REG_XCERB 0x44
+#define OMAP_MCBSP_REG_PCR0 0x48
+#define OMAP_MCBSP_REG_RCERC 0x4C
+#define OMAP_MCBSP_REG_RCERD 0x50
+#define OMAP_MCBSP_REG_XCERC 0x54
+#define OMAP_MCBSP_REG_XCERD 0x58
+#define OMAP_MCBSP_REG_RCERE 0x5C
+#define OMAP_MCBSP_REG_RCERF 0x60
+#define OMAP_MCBSP_REG_XCERE 0x64
+#define OMAP_MCBSP_REG_XCERF 0x68
+#define OMAP_MCBSP_REG_RCERG 0x6C
+#define OMAP_MCBSP_REG_RCERH 0x70
+#define OMAP_MCBSP_REG_XCERG 0x74
+#define OMAP_MCBSP_REG_XCERH 0x78
+
+#define OMAP_MAX_MCBSP_COUNT 2
+#define MAX_MCBSP_CLOCKS 2
+
+#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP OMAP_MCBSP2
+#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST 0x0001
+#define RRDY 0x0002
+#define RFULL 0x0004
+#define RSYNC_ERR 0x0008
+#define RINTM(value) ((value)<<4) /* bits 4:5 */
+#define ABIS 0x0040
+#define DXENA 0x0080
+#define CLKSTP(value) ((value)<<11) /* bits 11:12 */
+#define RJUST(value) ((value)<<13) /* bits 13:14 */
+#define DLB 0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST 0x0001
+#define XRDY 0x0002
+#define XEMPTY 0x0004
+#define XSYNC_ERR 0x0008
+#define XINTM(value) ((value)<<4) /* bits 4:5 */
+#define GRST 0x0040
+#define FRST 0x0080
+#define SOFT 0x0100
+#define FREE 0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP 0x0001
+#define CLKXP 0x0002
+#define FSRP 0x0004
+#define FSXP 0x0008
+#define DR_STAT 0x0010
+#define DX_STAT 0x0020
+#define CLKS_STAT 0x0040
+#define SCLKME 0x0080
+#define CLKRM 0x0100
+#define CLKXM 0x0200
+#define FSRM 0x0400
+#define FSXM 0x0800
+#define RIOEN 0x1000
+#define XIOEN 0x2000
+#define IDLE_EN 0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */
+#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */
+#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value) (value) /* Bits 0:1 */
+#define RFIG 0x0004
+#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */
+#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */
+#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */
+#define RPHASE 0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value) (value) /* Bits 0:1 */
+#define XFIG 0x0004
+#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */
+#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */
+#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */
+#define XPHASE 0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value) (value) /* Bits 0:7 */
+#define FWID(value) ((value)<<8) /* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value) (value) /* Bits 0:11 */
+#define FSGM 0x1000
+#define CLKSM 0x2000
+#define CLKSP 0x4000
+#define GSYNC 0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM 0x0001
+#define RCBLK(value) ((value)<<2) /* Bits 2:4 */
+#define RPABLK(value) ((value)<<5) /* Bits 5:6 */
+#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value) (value) /* Bits 0:1 */
+#define XCBLK(value) ((value)<<2) /* Bits 2:4 */
+#define XPABLK(value) ((value)<<5) /* Bits 5:6 */
+#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+ u16 spcr2;
+ u16 spcr1;
+ u16 rcr2;
+ u16 rcr1;
+ u16 xcr2;
+ u16 xcr1;
+ u16 srgr2;
+ u16 srgr1;
+ u16 mcr2;
+ u16 mcr1;
+ u16 pcr0;
+ u16 rcerc;
+ u16 rcerd;
+ u16 xcerc;
+ u16 xcerd;
+ u16 rcere;
+ u16 rcerf;
+ u16 xcere;
+ u16 xcerf;
+ u16 rcerg;
+ u16 rcerh;
+ u16 xcerg;
+ u16 xcerh;
+};
+
+typedef enum {
+ OMAP_MCBSP1 = 0,
+ OMAP_MCBSP2,
+ OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+ OMAP_MCBSP_WORD_8 = 0,
+ OMAP_MCBSP_WORD_12,
+ OMAP_MCBSP_WORD_16,
+ OMAP_MCBSP_WORD_20,
+ OMAP_MCBSP_WORD_24,
+ OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+ OMAP_MCBSP_CLK_RISING = 0,
+ OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+ OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+ OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+ OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+ OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+ OMAP_MCBSP_SPI_MASTER = 0,
+ OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+ omap_mcbsp_spi_mode spi_mode;
+ omap_mcbsp_clk_polarity rx_clock_polarity;
+ omap_mcbsp_clk_polarity tx_clock_polarity;
+ omap_mcbsp_fs_polarity fsx_polarity;
+ u8 clk_div;
+ omap_mcbsp_clk_stp_mode clk_stp_mode;
+ omap_mcbsp_word_length word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+ int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ u32 virt_base;
+ u8 dma_rx_sync, dma_tx_sync;
+ u16 rx_irq, tx_irq;
+ struct omap_mcbsp_ops *ops;
+ char const *clk_name;
+};
+
+struct omap_mcbsp {
+ struct device *dev;
+ u32 io_base;
+ u8 id;
+ u8 free;
+ omap_mcbsp_word_length rx_word_length;
+ omap_mcbsp_word_length tx_word_length;
+
+ omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+ /* IRQ based TX/RX */
+ int rx_irq;
+ int tx_irq;
+
+ /* DMA stuff */
+ u8 dma_rx_sync;
+ short dma_rx_lch;
+ u8 dma_tx_sync;
+ short dma_tx_lch;
+
+ /* Completion queues */
+ struct completion tx_irq_completion;
+ struct completion rx_irq_completion;
+ struct completion tx_dma_completion;
+ struct completion rx_dma_completion;
+
+ /* Protect the field .free, while checking if the mcbsp is in use */
+ spinlock_t lock;
+ struct omap_mcbsp_platform_data *pdata;
+ struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+ int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/include/asm-arm/arch-omap/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
similarity index 100%
rename from include/asm-arm/arch-omap/mcspi.h
rename to arch/arm/plat-omap/include/mach/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 0000000..037486c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ * on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET UL(0x30000000)
+
+#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
+ (dma_addr_t)virt_to_lbus(page_address(page)) : \
+ (dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \
+ virt_to_lbus(addr) : \
+ __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+ (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
new file mode 100644
index 0000000..3122bf6
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+ int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+ void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP (1 << 7)
+#define EN_VMMC_SLEEP (1 << 6)
+#define EN_VAUX_SLEEP (1 << 5)
+#define EN_VIO_SLEEP (1 << 4)
+#define EN_VMEM_SLEEP (1 << 3)
+#define EN_DC3_SLEEP (1 << 2)
+#define EN_DC2_SLEEP (1 << 1)
+#define EN_VC_SLEEP (1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus() 1
+#else
+#define omap_has_menelaus() 0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 0000000..fc15d13
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS 2
+
+struct omap_mmc_platform_data {
+ struct omap_mmc_conf conf;
+
+ /* number of slots on board */
+ unsigned nr_slots:2;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* switch the bus to a new slot */
+ int (* switch_slot)(struct device *dev, int slot);
+ /* initialize board-specific MMC functionality, can be NULL if
+ * not supported */
+ int (* init)(struct device *dev);
+ void (* cleanup)(struct device *dev);
+ void (* shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
+
+ struct omap_mmc_slot_data {
+ int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+ int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+ int (* get_ro)(struct device *dev, int slot);
+
+ /* return MMC cover switch state, can be NULL if not supported.
+ *
+ * possible return values:
+ * 0 - open
+ * 1 - closed
+ */
+ int (* get_cover_state)(struct device *dev, int slot);
+
+ const char *name;
+ u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (* card_detect)(int irq);
+
+ unsigned int ban_openended:1;
+
+ } slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 0000000..5cee7e1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE (0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET 0x100
+
+typedef struct {
+ u32 cntl; /* CNTL_TIMER, R/W */
+ u32 load_tim; /* LOAD_TIM, W */
+ u32 read_tim; /* READ_TIM, R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n) \
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+ (n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+ volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+ return timer->read_tim;
+}
+
+#define xip_irqpending() \
+ (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime() (~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period. This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
new file mode 100644
index 0000000..614b2c1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -0,0 +1,615 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ * For example, W8_1610_MMC2_DAT0, where:
+ * - W8 = ball
+ * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
+ * - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+ .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
+ .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
+ .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+ .mux_reg = OMAP730_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
+ .pull_reg = OMAP730_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) \
+ .mux_reg = OMAP730_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
+ pull_reg, pull_bit, pull_status, \
+ pu_pd_reg, pu_pd_status, debug_status) \
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG(mux_reg, mode_offset, mode) \
+ PULL_REG(pull_reg, pull_bit, pull_status) \
+ PU_PD_REG(pu_pd_reg, pu_pd_status) \
+},
+
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ * as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_730(mux_reg, mode_offset, mode) \
+ PULL_REG_730(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode, \
+ pull_en, pull_mode, dbg) \
+{ \
+ .name = desc, \
+ .debug = dbg, \
+ .mux_reg = reg_offset, \
+ .mask = mode, \
+ .pull_val = pull_en, \
+ .pu_pd_val = pull_mode, \
+},
+
+
+#define PULL_DISABLED 0
+#define PULL_ENABLED 1
+
+#define PULL_DOWN 0
+#define PULL_UP 1
+
+struct pin_config {
+ char *name;
+ unsigned char busy;
+ unsigned char debug;
+
+ const char *mux_reg_name;
+ const unsigned int mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+
+ const char *pull_name;
+ const unsigned int pull_reg;
+ const unsigned char pull_val;
+ const unsigned char pull_bit;
+
+ const char *pu_pd_name;
+ const unsigned int pu_pd_reg;
+ const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+ /* OMAP 730 keyboard */
+ E2_730_KBR0,
+ J7_730_KBR1,
+ E1_730_KBR2,
+ F3_730_KBR3,
+ D2_730_KBR4,
+ C2_730_KBC0,
+ D3_730_KBC1,
+ E4_730_KBC2,
+ F4_730_KBC3,
+ E3_730_KBC4,
+
+ /* USB */
+ AA17_730_USB_DM,
+ W16_730_USB_PU_EN,
+ W17_730_USB_VBUSI,
+};
+
+enum omap1xxx_index {
+ /* UART1 (BT_UART_GATING)*/
+ UART1_TX = 0,
+ UART1_RTS,
+
+ /* UART2 (COM_UART_GATING)*/
+ UART2_TX,
+ UART2_RX,
+ UART2_CTS,
+ UART2_RTS,
+
+ /* UART3 (GIGA_UART_GATING) */
+ UART3_TX,
+ UART3_RX,
+ UART3_CTS,
+ UART3_RTS,
+ UART3_CLKREQ,
+ UART3_BCLK, /* 12MHz clock out */
+ Y15_1610_UART3_RTS,
+
+ /* PWT & PWL */
+ PWT,
+ PWL,
+
+ /* USB master generic */
+ R18_USB_VBUS,
+ R18_1510_USB_GPIO0,
+ W4_USB_PUEN,
+ W4_USB_CLKO,
+ W4_USB_HIGHZ,
+ W4_GPIO58,
+
+ /* USB1 master */
+ USB1_SUSP,
+ USB1_SEO,
+ W13_1610_USB1_SE0,
+ USB1_TXEN,
+ USB1_TXD,
+ USB1_VP,
+ USB1_VM,
+ USB1_RCV,
+ USB1_SPEED,
+ R13_1610_USB1_SPEED,
+ R13_1710_USB1_SE0,
+
+ /* USB2 master */
+ USB2_SUSP,
+ USB2_VP,
+ USB2_TXEN,
+ USB2_VM,
+ USB2_RCV,
+ USB2_SEO,
+ USB2_TXD,
+
+ /* OMAP-1510 GPIO */
+ R18_1510_GPIO0,
+ R19_1510_GPIO1,
+ M14_1510_GPIO2,
+
+ /* OMAP1610 GPIO */
+ P18_1610_GPIO3,
+ Y15_1610_GPIO17,
+
+ /* OMAP-1710 GPIO */
+ R18_1710_GPIO0,
+ V2_1710_GPIO10,
+ N21_1710_GPIO14,
+ W15_1710_GPIO40,
+
+ /* MPUIO */
+ MPUIO2,
+ N15_1610_MPUIO2,
+ MPUIO4,
+ MPUIO5,
+ T20_1610_MPUIO5,
+ W11_1610_MPUIO6,
+ V10_1610_MPUIO7,
+ W11_1610_MPUIO9,
+ V10_1610_MPUIO10,
+ W10_1610_MPUIO11,
+ E20_1610_MPUIO13,
+ U20_1610_MPUIO14,
+ E19_1610_MPUIO15,
+
+ /* MCBSP2 */
+ MCBSP2_CLKR,
+ MCBSP2_CLKX,
+ MCBSP2_DR,
+ MCBSP2_DX,
+ MCBSP2_FSR,
+ MCBSP2_FSX,
+
+ /* MCBSP3 */
+ MCBSP3_CLKX,
+
+ /* Misc ballouts */
+ BALLOUT_V8_ARMIO3,
+ N20_HDQ,
+
+ /* OMAP-1610 MMC2 */
+ W8_1610_MMC2_DAT0,
+ V8_1610_MMC2_DAT1,
+ W15_1610_MMC2_DAT2,
+ R10_1610_MMC2_DAT3,
+ Y10_1610_MMC2_CLK,
+ Y8_1610_MMC2_CMD,
+ V9_1610_MMC2_CMDDIR,
+ V5_1610_MMC2_DATDIR0,
+ W19_1610_MMC2_DATDIR1,
+ R18_1610_MMC2_CLKIN,
+
+ /* OMAP-1610 External Trace Interface */
+ M19_1610_ETM_PSTAT0,
+ L15_1610_ETM_PSTAT1,
+ L18_1610_ETM_PSTAT2,
+ L19_1610_ETM_D0,
+ J19_1610_ETM_D6,
+ J18_1610_ETM_D7,
+
+ /* OMAP16XX GPIO */
+ P20_1610_GPIO4,
+ V9_1610_GPIO7,
+ W8_1610_GPIO9,
+ N20_1610_GPIO11,
+ N19_1610_GPIO13,
+ P10_1610_GPIO22,
+ V5_1610_GPIO24,
+ AA20_1610_GPIO_41,
+ W19_1610_GPIO48,
+ M7_1610_GPIO62,
+ V14_16XX_GPIO37,
+ R9_16XX_GPIO18,
+ L14_16XX_GPIO49,
+
+ /* OMAP-1610 uWire */
+ V19_1610_UWIRE_SCLK,
+ U18_1610_UWIRE_SDI,
+ W21_1610_UWIRE_SDO,
+ N14_1610_UWIRE_CS0,
+ P15_1610_UWIRE_CS3,
+ N15_1610_UWIRE_CS1,
+
+ /* OMAP-1610 SPI */
+ U19_1610_SPIF_SCK,
+ U18_1610_SPIF_DIN,
+ P20_1610_SPIF_DIN,
+ W21_1610_SPIF_DOUT,
+ R18_1610_SPIF_DOUT,
+ N14_1610_SPIF_CS0,
+ N15_1610_SPIF_CS1,
+ T19_1610_SPIF_CS2,
+ P15_1610_SPIF_CS3,
+
+ /* OMAP-1610 Flash */
+ L3_1610_FLASH_CS2B_OE,
+ M8_1610_FLASH_CS2B_WE,
+
+ /* First MMC */
+ MMC_CMD,
+ MMC_DAT1,
+ MMC_DAT2,
+ MMC_DAT0,
+ MMC_CLK,
+ MMC_DAT3,
+
+ /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+ M15_1710_MMC_CLKI,
+ P19_1710_MMC_CMDDIR,
+ P20_1710_MMC_DATDIR0,
+
+ /* OMAP-1610 USB0 alternate pin configuration */
+ W9_USB0_TXEN,
+ AA9_USB0_VP,
+ Y5_USB0_RCV,
+ R9_USB0_VM,
+ V6_USB0_TXD,
+ W5_USB0_SE0,
+ V9_USB0_SPEED,
+ V9_USB0_SUSP,
+
+ /* USB2 */
+ W9_USB2_TXEN,
+ AA9_USB2_VP,
+ Y5_USB2_RCV,
+ R9_USB2_VM,
+ V6_USB2_TXD,
+ W5_USB2_SE0,
+
+ /* 16XX UART */
+ R13_1610_UART1_TX,
+ V14_16XX_UART1_RX,
+ R14_1610_UART1_CTS,
+ AA15_1610_UART1_RTS,
+ R9_16XX_UART2_RX,
+ L14_16XX_UART3_RX,
+
+ /* I2C OMAP-1610 */
+ I2C_SCL,
+ I2C_SDA,
+
+ /* Keypad */
+ F18_1610_KBC0,
+ D20_1610_KBC1,
+ D19_1610_KBC2,
+ E18_1610_KBC3,
+ C21_1610_KBC4,
+ G18_1610_KBR0,
+ F19_1610_KBR1,
+ H14_1610_KBR2,
+ E20_1610_KBR3,
+ E19_1610_KBR4,
+ N19_1610_KBR5,
+
+ /* Power management */
+ T20_1610_LOW_PWR,
+
+ /* MCLK Settings */
+ V5_1710_MCLK_ON,
+ V5_1710_MCLK_OFF,
+ R10_1610_MCLK_ON,
+ R10_1610_MCLK_OFF,
+
+ /* CompactFlash controller */
+ P11_1610_CF_CD2,
+ R11_1610_CF_IOIS16,
+ V10_1610_CF_IREQ,
+ W10_1610_CF_RESET,
+ W11_1610_CF_CD1,
+
+ /* parallel camera */
+ J15_1610_CAM_LCLK,
+ J18_1610_CAM_D7,
+ J19_1610_CAM_D6,
+ J14_1610_CAM_D5,
+ K18_1610_CAM_D4,
+ K19_1610_CAM_D3,
+ K15_1610_CAM_D2,
+ K14_1610_CAM_D1,
+ L19_1610_CAM_D0,
+ L18_1610_CAM_VS,
+ L15_1610_CAM_HS,
+ M19_1610_CAM_RSTZ,
+ Y15_1610_CAM_OUTCLK,
+
+ /* serial camera */
+ H19_1610_CAM_EXCLK,
+ Y12_1610_CCP_CLKP,
+ W13_1610_CCP_CLKM,
+ W14_1610_CCP_DATAP,
+ Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+ /* 24xx I2C */
+ M19_24XX_I2C1_SCL,
+ L15_24XX_I2C1_SDA,
+ J15_24XX_I2C2_SCL,
+ H19_24XX_I2C2_SDA,
+
+ /* 24xx Menelaus interrupt */
+ W19_24XX_SYS_NIRQ,
+
+ /* 24xx clock */
+ W14_24XX_SYS_CLKOUT,
+
+ /* 24xx GPMC chipselects, wait pin monitoring */
+ E2_GPMC_NCS2,
+ L2_GPMC_NCS7,
+ L3_GPMC_WAIT0,
+ N7_GPMC_WAIT1,
+ M1_GPMC_WAIT2,
+ P1_GPMC_WAIT3,
+
+ /* 242X McBSP */
+ Y15_24XX_MCBSP2_CLKX,
+ R14_24XX_MCBSP2_FSX,
+ W15_24XX_MCBSP2_DR,
+ V15_24XX_MCBSP2_DX,
+
+ /* 24xx GPIO */
+ M21_242X_GPIO11,
+ P21_242X_GPIO12,
+ AA10_242X_GPIO13,
+ AA6_242X_GPIO14,
+ AA4_242X_GPIO15,
+ Y11_242X_GPIO16,
+ AA12_242X_GPIO17,
+ AA8_242X_GPIO58,
+ Y20_24XX_GPIO60,
+ W4__24XX_GPIO74,
+ N15_24XX_GPIO85,
+ M15_24XX_GPIO92,
+ P20_24XX_GPIO93,
+ P18_24XX_GPIO95,
+ M18_24XX_GPIO96,
+ L14_24XX_GPIO97,
+ J15_24XX_GPIO99,
+ V14_24XX_GPIO117,
+ P14_24XX_GPIO125,
+
+ /* 242x DBG GPIO */
+ V4_242X_GPIO49,
+ W2_242X_GPIO50,
+ U4_242X_GPIO51,
+ V3_242X_GPIO52,
+ V2_242X_GPIO53,
+ V6_242X_GPIO53,
+ T4_242X_GPIO54,
+ Y4_242X_GPIO54,
+ T3_242X_GPIO55,
+ U2_242X_GPIO56,
+
+ /* 24xx external DMA requests */
+ AA10_242X_DMAREQ0,
+ AA6_242X_DMAREQ1,
+ E4_242X_DMAREQ2,
+ G4_242X_DMAREQ3,
+ D3_242X_DMAREQ4,
+ E3_242X_DMAREQ5,
+
+ /* UART3 */
+ K15_24XX_UART3_TX,
+ K14_24XX_UART3_RX,
+
+ /* MMC/SDIO */
+ G19_24XX_MMC_CLKO,
+ H18_24XX_MMC_CMD,
+ F20_24XX_MMC_DAT0,
+ H14_24XX_MMC_DAT1,
+ E19_24XX_MMC_DAT2,
+ D19_24XX_MMC_DAT3,
+ F19_24XX_MMC_DAT_DIR0,
+ E20_24XX_MMC_DAT_DIR1,
+ F18_24XX_MMC_DAT_DIR2,
+ E18_24XX_MMC_DAT_DIR3,
+ G18_24XX_MMC_CMD_DIR,
+ H15_24XX_MMC_CLKI,
+
+ /* Full speed USB */
+ J20_24XX_USB0_PUEN,
+ J19_24XX_USB0_VP,
+ K20_24XX_USB0_VM,
+ J18_24XX_USB0_RCV,
+ K19_24XX_USB0_TXEN,
+ J14_24XX_USB0_SE0,
+ K18_24XX_USB0_DAT,
+
+ N14_24XX_USB1_SE0,
+ W12_24XX_USB1_SE0,
+ P15_24XX_USB1_DAT,
+ R13_24XX_USB1_DAT,
+ W20_24XX_USB1_TXEN,
+ P13_24XX_USB1_TXEN,
+ V19_24XX_USB1_RCV,
+ V12_24XX_USB1_RCV,
+
+ AA10_24XX_USB2_SE0,
+ Y11_24XX_USB2_DAT,
+ AA12_24XX_USB2_TXEN,
+ AA6_24XX_USB2_RCV,
+ AA4_24XX_USB2_TLLSE0,
+
+ /* Keypad GPIO*/
+ T19_24XX_KBR0,
+ R19_24XX_KBR1,
+ V18_24XX_KBR2,
+ M21_24XX_KBR3,
+ E5__24XX_KBR4,
+ M18_24XX_KBR5,
+ R20_24XX_KBC0,
+ M14_24XX_KBC1,
+ H19_24XX_KBC2,
+ V17_24XX_KBC3,
+ P21_24XX_KBC4,
+ L14_24XX_KBC5,
+ N19_24XX_KBC6,
+
+ /* 24xx Menelaus Keypad GPIO */
+ B3__24XX_KBR5,
+ AA4_24XX_KBC2,
+ B13_24XX_KBC6,
+
+ /* 2430 USB */
+ AD9_2430_USB0_PUEN,
+ Y11_2430_USB0_VP,
+ AD7_2430_USB0_VM,
+ AE7_2430_USB0_RCV,
+ AD4_2430_USB0_TXEN,
+ AF9_2430_USB0_SE0,
+ AE6_2430_USB0_DAT,
+ AD24_2430_USB1_SE0,
+ AB24_2430_USB1_RCV,
+ Y25_2430_USB1_TXEN,
+ AA26_2430_USB1_DAT,
+
+ /* 2430 HS-USB */
+ AD9_2430_USB0HS_DATA3,
+ Y11_2430_USB0HS_DATA4,
+ AD7_2430_USB0HS_DATA5,
+ AE7_2430_USB0HS_DATA6,
+ AD4_2430_USB0HS_DATA2,
+ AF9_2430_USB0HS_DATA0,
+ AE6_2430_USB0HS_DATA1,
+ AE8_2430_USB0HS_CLK,
+ AD8_2430_USB0HS_DIR,
+ AE5_2430_USB0HS_STP,
+ AE9_2430_USB0HS_NXT,
+ AC7_2430_USB0HS_DATA7,
+
+ /* 2430 McBSP */
+ AC10_2430_MCBSP2_FSX,
+ AD16_2430_MCBSP2_CLX,
+ AE13_2430_MCBSP2_DX,
+ AD13_2430_MCBSP2_DR,
+ AC10_2430_MCBSP2_FSX_OFF,
+ AD16_2430_MCBSP2_CLX_OFF,
+ AE13_2430_MCBSP2_DX_OFF,
+ AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+ struct pin_config *pins;
+ unsigned long size;
+ int (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h
new file mode 100644
index 0000000..631a7be
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_nand_platform_data {
+ unsigned int options;
+ int cs;
+ int gpio_irq;
+ struct mtd_partition *parts;
+ int nr_parts;
+ int (*nand_setup)(void __iomem *);
+ int (*dev_ready)(struct omap_nand_platform_data *);
+ int dma_channel;
+ void __iomem *gpmc_cs_baseaddr;
+ void __iomem *gpmc_baseaddr;
+};
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
new file mode 100644
index 0000000..bdf30a0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * History
+ * -------
+ *
+ * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk,
+ * original version based in sa1100 driver
+ * and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <mach/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <mach/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE (1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+ char *id; /* identification string */
+ int stream_id; /* numeric identification */
+ int dma_dev; /* dma number of that device */
+ int *lch; /* Chain of channels this stream is linked to */
+ char started; /* to store if the chain was started or not */
+ int dma_q_head; /* DMA Channel Q Head */
+ int dma_q_tail; /* DMA Channel Q Tail */
+ char dma_q_count; /* DMA Channel Q Count */
+ int active:1; /* we are using this stream for transfer now */
+ int period; /* current transfer period */
+ int periods; /* current count of periods registerd in the DMA engine */
+ spinlock_t dma_lock; /* for locking in DMA operations */
+ struct snd_pcm_substream *stream; /* the pcm stream */
+ unsigned linked:1; /* dma channels linked */
+ int offset; /* store start position of the last period in the alsa buffer */
+ int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */
+ int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ long samplerate;
+ struct audio_stream s[2]; /* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+ char *name;
+ struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+ struct snd_pcm_hw_constraint_list *hw_constraints_rates;
+ struct snd_pcm_hardware *snd_omap_alsa_playback;
+ struct snd_pcm_hardware *snd_omap_alsa_capture;
+ void (*codec_configure_dev)(void);
+ void (*codec_set_samplerate)(long);
+ void (*codec_clock_setup)(void);
+ int (*codec_clock_on)(void);
+ int (*codec_clock_off)(void);
+ int (*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend NULL
+#define snd_omap_alsa_resume NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
new file mode 100644
index 0000000..505a38a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE 0xE0000000
+#define OMAP1510_DSP_SIZE 0x28000
+#define OMAP1510_DSP_START 0xE0000000
+
+#define OMAP1510_DSPREG_BASE 0xE1000000
+#define OMAP1510_DSPREG_SIZE SZ_128K
+#define OMAP1510_DSPREG_START 0xE1000000
+
+#endif /* __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
new file mode 100644
index 0000000..c6c93af
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -0,0 +1,197 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE 0xE0000000
+#define OMAP16XX_DSP_SIZE 0x28000
+#define OMAP16XX_DSP_START 0xE0000000
+
+#define OMAP16XX_DSPREG_BASE 0xE1000000
+#define OMAP16XX_DSPREG_SIZE SZ_128K
+#define OMAP16XX_DSPREG_START 0xE1000000
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE (0xfffe0000)
+#define OMAP_IH2_1_BASE (0xfffe0100)
+#define OMAP_IH2_2_BASE (0xfffe0200)
+#define OMAP_IH2_3_BASE (0xfffe0300)
+
+#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL 0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR (OMAP_UART3_BASE + 0)
+#define UART3_THR (OMAP_UART3_BASE + 0)
+#define UART3_DLL (OMAP_UART3_BASE + 0)
+#define UART3_IER (OMAP_UART3_BASE + 4)
+#define UART3_DLH (OMAP_UART3_BASE + 4)
+#define UART3_IIR (OMAP_UART3_BASE + 8)
+#define UART3_FCR (OMAP_UART3_BASE + 8)
+#define UART3_EFR (OMAP_UART3_BASE + 8)
+#define UART3_LCR (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1 (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2 (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)
+#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT 5
+#define WCLR_PTV_SHIFT 2
+
+#define WWPS_W_PEND_WSPR (1 << 4)
+#define WWPS_W_PEND_WTGR (1 << 3)
+#define WWPS_W_PEND_WLDR (1 << 2)
+#define WWPS_W_PEND_WCRR (1 << 1)
+#define WWPS_W_PEND_WCLR (1 << 0)
+
+#define WSPR_ENABLE_0 (0x0000bbbb)
+#define WSPR_ENABLE_1 (0x00004444)
+#define WSPR_DISABLE_0 (0x0000aaaa)
+#define WSPR_DISABLE_1 (0x00005555)
+
+/* Mailbox */
+#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
+
+#endif /* __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
new file mode 100644
index 0000000..bb8319d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE 0x48000000
+#define L4_WK_243X_BASE 0x49000000
+#define L3_24XX_BASE 0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+
+#define OMAP2420_CTRL_BASE L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE 0x68008000
+
+#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE 0x6C000000
+#define OMAP243X_SDRC_BASE 0x6D000000
+#define OMAP243X_GPMC_BASE 0x6E000000
+#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE 0x58000000
+#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE 0x5C000000
+#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
new file mode 100644
index 0000000..8e0479f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE 0x48000000
+#define L4_WK_34XX_BASE 0x48300000
+#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE 0x49000000
+#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE 0x54000000
+#define L4_EMU_BASE L4_EMU_34XX_BASE
+#define L3_34XX_BASE 0x68000000
+#define L3_OMAP_BASE L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE 0x48320000
+#define OMAP3430_CM_BASE 0x48004800
+#define OMAP3430_PRM_BASE 0x48306800
+#define OMAP343X_SMS_BASE 0x6C000000
+#define OMAP343X_SDRC_BASE 0x6D000000
+#define OMAP34XX_GPMC_BASE 0x6E000000
+#define OMAP343X_SCM_BASE 0x48002000
+#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE 0x48200000
+#define OMAP34XX_IVA_INTC_BASE 0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE 0x58000000
+#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
new file mode 100644
index 0000000..14272bc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE 0xE0000000
+#define OMAP730_DSP_SIZE 0x50000
+#define OMAP730_DSP_START 0xE0000000
+
+#define OMAP730_DSPREG_BASE 0xE1000000
+#define OMAP730_DSPREG_SIZE SZ_128K
+#define OMAP730_DSPREG_START 0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE 0xfffe1000
+#define OMAP730_IO_CONF_0 0xfffe1070
+#define OMAP730_IO_CONF_1 0xfffe1074
+#define OMAP730_IO_CONF_2 0xfffe1078
+#define OMAP730_IO_CONF_3 0xfffe107c
+#define OMAP730_IO_CONF_4 0xfffe1080
+#define OMAP730_IO_CONF_5 0xfffe1084
+#define OMAP730_IO_CONF_6 0xfffe1088
+#define OMAP730_IO_CONF_7 0xfffe108c
+#define OMAP730_IO_CONF_8 0xfffe1090
+#define OMAP730_IO_CONF_9 0xfffe1094
+#define OMAP730_IO_CONF_10 0xfffe1098
+#define OMAP730_IO_CONF_11 0xfffe109c
+#define OMAP730_IO_CONF_12 0xfffe10a0
+#define OMAP730_IO_CONF_13 0xfffe10a4
+
+#define OMAP730_MODE_1 0xfffe1010
+#define OMAP730_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0 0xfffecc10
+#define OMAP730_FLASH_ACFG_0 0xfffecc50
+#define OMAP730_FLASH_CFG_1 0xfffecc14
+#define OMAP730_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE 0xfffbb800
+#define OMAP730_DSP_M_CTL 0xfffbb804
+#define OMAP730_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
new file mode 100644
index 0000000..cae037d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -0,0 +1,395 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
+#define OMAP_IO(num) _IO('O', num)
+
+#define OMAPFB_MIRROR OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX OMAP_IO(37)
+#define OMAPFB_VSYNC OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK 0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
+#define OMAPFB_CAPS_TEARSYNC 0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK 0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
+
+#define OMAPFB_EVENT_READY 1
+#define OMAPFB_EVENT_DISABLED 2
+
+#define OMAPFB_MEMTYPE_SDRAM 0
+#define OMAPFB_MEMTYPE_SRAM 1
+#define OMAPFB_MEMTYPE_MAX 1
+
+enum omapfb_color_format {
+ OMAPFB_COLOR_RGB565 = 0,
+ OMAPFB_COLOR_YUV422,
+ OMAPFB_COLOR_YUV420,
+ OMAPFB_COLOR_CLUT_8BPP,
+ OMAPFB_COLOR_CLUT_4BPP,
+ OMAPFB_COLOR_CLUT_2BPP,
+ OMAPFB_COLOR_CLUT_1BPP,
+ OMAPFB_COLOR_RGB444,
+ OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+ __u32 x, y;
+ __u32 width, height;
+ __u32 format;
+ __u32 out_x, out_y;
+ __u32 out_width, out_height;
+ __u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+ __u32 x, y;
+ __u32 width, height;
+ __u32 format;
+};
+
+enum omapfb_plane {
+ OMAPFB_PLANE_GFX = 0,
+ OMAPFB_PLANE_VID1,
+ OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+ OMAPFB_CHANNEL_OUT_LCD = 0,
+ OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+ __u32 pos_x;
+ __u32 pos_y;
+ __u8 enabled;
+ __u8 channel_out;
+ __u8 mirror;
+ __u8 reserved1;
+ __u32 out_width;
+ __u32 out_height;
+ __u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+ __u32 size;
+ __u8 type;
+ __u8 reserved[3];
+};
+
+struct omapfb_caps {
+ __u32 ctrl;
+ __u32 plane_color;
+ __u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+ OMAPFB_COLOR_KEY_DISABLED = 0,
+ OMAPFB_COLOR_KEY_GFX_DST,
+ OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+ __u8 channel_out;
+ __u32 background;
+ __u32 trans_key;
+ __u8 key_type;
+};
+
+enum omapfb_update_mode {
+ OMAPFB_UPDATE_DISABLED = 0,
+ OMAPFB_AUTO_UPDATE,
+ OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <mach/board.h>
+
+#define OMAP_LCDC_INV_VSYNC 0x0001
+#define OMAP_LCDC_INV_HSYNC 0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK 0x003f
+
+#define OMAP_LCDC_PANEL_TFT 0x0100
+
+#define OMAPFB_PLANE_XRES_MIN 8
+#define OMAPFB_PLANE_YRES_MIN 8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM 1
+#else
+#define OMAPFB_PLANE_NUM 3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+ const char *name;
+ int config; /* TFT/STN, signal inversion */
+ int bpp; /* Pixel format in fb mem */
+ int data_lines; /* Lines on LCD HW interface */
+
+ int x_res, y_res;
+ int pixel_clock; /* In kHz */
+ int hsw; /* Horizontal synchronization
+ pulse width */
+ int hfp; /* Horizontal front porch */
+ int hbp; /* Horizontal back porch */
+ int vsw; /* Vertical synchronization
+ pulse width */
+ int vfp; /* Vertical front porch */
+ int vbp; /* Vertical back porch */
+ int acb; /* ac-bias pin frequency */
+ int pcd; /* pixel clock divider.
+ Obsolete use pixel_clock instead */
+
+ int (*init) (struct lcd_panel *panel,
+ struct omapfb_device *fbdev);
+ void (*cleanup) (struct lcd_panel *panel);
+ int (*enable) (struct lcd_panel *panel);
+ void (*disable) (struct lcd_panel *panel);
+ unsigned long (*get_caps) (struct lcd_panel *panel);
+ int (*set_bklight_level)(struct lcd_panel *panel,
+ unsigned int level);
+ unsigned int (*get_bklight_level)(struct lcd_panel *panel);
+ unsigned int (*get_bklight_max) (struct lcd_panel *panel);
+ int (*run_test) (struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+ int cs_on_time;
+ int cs_off_time;
+ int we_on_time;
+ int we_off_time;
+ int re_on_time;
+ int re_off_time;
+ int we_cycle_time;
+ int re_cycle_time;
+ int cs_pulse_width;
+ int access_time;
+
+ int clk_div;
+
+ u32 tim[5]; /* set by extif->convert_timings */
+
+ int converted;
+};
+
+struct lcd_ctrl_extif {
+ int (*init) (struct omapfb_device *fbdev);
+ void (*cleanup) (void);
+ void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div);
+ unsigned long (*get_max_tx_rate)(void);
+ int (*convert_timings) (struct extif_timings *timings);
+ void (*set_timings) (const struct extif_timings *timings);
+ void (*set_bits_per_cycle)(int bpc);
+ void (*write_command) (const void *buf, unsigned int len);
+ void (*read_data) (void *buf, unsigned int len);
+ void (*write_data) (const void *buf, unsigned int len);
+ void (*transfer_area) (int width, int height,
+ void (callback)(void * data), void *data);
+ int (*setup_tearsync) (unsigned pin_cnt,
+ unsigned hs_pulse_time, unsigned vs_pulse_time,
+ int hs_pol_inv, int vs_pol_inv, int div);
+ int (*enable_tearsync) (int enable, unsigned line);
+
+ unsigned long max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+ struct notifier_block nb;
+ void *data;
+ int plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+ unsigned long event,
+ void *fbi);
+
+struct omapfb_mem_region {
+ dma_addr_t paddr;
+ void *vaddr;
+ unsigned long size;
+ u8 type; /* OMAPFB_PLANE_MEM_* */
+ unsigned alloc:1; /* allocated by the driver */
+ unsigned map:1; /* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+ int region_cnt;
+ struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+ const char *name;
+ void *data;
+
+ int (*init) (struct omapfb_device *fbdev,
+ int ext_mode,
+ struct omapfb_mem_desc *req_md);
+ void (*cleanup) (void);
+ void (*bind_client) (struct omapfb_notifier_block *nb);
+ void (*get_caps) (int plane, struct omapfb_caps *caps);
+ int (*set_update_mode)(enum omapfb_update_mode mode);
+ enum omapfb_update_mode (*get_update_mode)(void);
+ int (*setup_plane) (int plane, int channel_out,
+ unsigned long offset,
+ int screen_width,
+ int pos_x, int pos_y, int width,
+ int height, int color_mode);
+ int (*setup_mem) (int plane, size_t size,
+ int mem_type, unsigned long *paddr);
+ int (*mmap) (struct fb_info *info,
+ struct vm_area_struct *vma);
+ int (*set_scale) (int plane,
+ int orig_width, int orig_height,
+ int out_width, int out_height);
+ int (*enable_plane) (int plane, int enable);
+ int (*update_window) (struct fb_info *fbi,
+ struct omapfb_update_window *win,
+ void (*callback)(void *),
+ void *callback_data);
+ void (*sync) (void);
+ void (*suspend) (void);
+ void (*resume) (void);
+ int (*run_test) (int test_num);
+ int (*setcolreg) (u_int regno, u16 red, u16 green,
+ u16 blue, u16 transp,
+ int update_hw_mem);
+ int (*set_color_key) (struct omapfb_color_key *ck);
+ int (*get_color_key) (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+ OMAPFB_DISABLED = 0,
+ OMAPFB_SUSPENDED= 99,
+ OMAPFB_ACTIVE = 100
+};
+
+struct omapfb_plane_struct {
+ int idx;
+ struct omapfb_plane_info info;
+ enum omapfb_color_format color_mode;
+ struct omapfb_device *fbdev;
+};
+
+struct omapfb_device {
+ int state;
+ int ext_lcdc; /* Using external
+ LCD controller */
+ struct mutex rqueue_mutex;
+
+ int palette_size;
+ u32 pseudo_palette[17];
+
+ struct lcd_panel *panel; /* LCD panel */
+ struct lcd_ctrl *ctrl; /* LCD controller */
+ struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
+ interface */
+ struct device *dev;
+ struct fb_var_screeninfo new_var; /* for mode changes */
+
+ struct omapfb_mem_desc mem_desc;
+ struct fb_info *fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+ struct omap_lcd_config lcd;
+ struct omapfb_mem_desc mem_desc;
+ void *ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+ unsigned long event);
+extern int omapfb_register_client(struct omapfb_notifier_block *nb,
+ omapfb_notifier_callback_t callback,
+ void *callback_data);
+extern int omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int omapfb_update_window_async(struct fb_info *fbi,
+ struct omapfb_update_window *win,
+ void (*callback)(void *),
+ void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
new file mode 100644
index 0000000..d57f202
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_onenand_platform_data {
+ int cs;
+ int gpio_irq;
+ struct mtd_partition *parts;
+ int nr_parts;
+ int (*onenand_setup)(void __iomem *);
+ int dma_channel;
+};
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 0000000..1eb4dc3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 0000000..bfa0932
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ * support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET 0x04
+#define ARM_IDLECT2_ASM_OFFSET 0x08
+
+#define TCMIF_ASM_BASE io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET 0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES 0x00000fff
+#define PERIPHERAL_ENABLE 0x2
+
+#define SELF_REFRESH_MODE 0x0c000001
+#define IDLE_EMIFS_REQUEST 0xc
+#define MODEM_32K_EN 0x1
+#define PER_EN 0x1
+
+#define CPU_SUSPEND_SIZE 200
+#define ULPD_LOW_PWR_EN 0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL 0
+#define ULPD_POWER_CTRL_REG_VAL 0x0219
+
+#define DSP_IDLE_DELAY 10
+#define DSP_IDLE 0x0040
+#define DSP_RST 0x0004
+#define DSP_ENABLE 0x0002
+#define SUFFICIENT_DSP_RESET_TIME 1000
+#define DEFAULT_MPUI_CONFIG 0x05cf
+#define ENABLE_XORCLK 0x2
+#define DSP_CLOCK_ENABLE 0x2000
+#define DSP_IDLE_MODE 0x2
+#define TC_IDLE_REQUEST (0x0000000c)
+
+#define IRQ_LEVEL2 (1<<0)
+#define IRQ_KEYBOARD (1<<1)
+#define IRQ_UART2 (1<<15)
+
+#define PDE_BIT 0x08
+#define PWD_EN_BIT 0x04
+#define EN_PERCK_BIT 0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7
+#define OMAP1610_IDLECT3_VAL 0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c
+#define OMAP1610_IDLECT3 0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
+#define OMAP730_IDLECT3_VAL 0x3f
+#define OMAP730_IDLECT3 0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
+
+#if !defined(CONFIG_ARCH_OMAP730) && \
+ !defined(CONFIG_ARCH_OMAP15XX) && \
+ !defined(CONFIG_ARCH_OMAP16XX) && \
+ !defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init() {}
+#define omap_serial_wake_trigger(x) {}
+#endif /* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+ ARM_SLEEP_SAVE_START = 0,
+ /*
+ * MPU control registers 32 bits
+ */
+ ARM_SLEEP_SAVE_ARM_CKCTL,
+ ARM_SLEEP_SAVE_ARM_IDLECT1,
+ ARM_SLEEP_SAVE_ARM_IDLECT2,
+ ARM_SLEEP_SAVE_ARM_IDLECT3,
+ ARM_SLEEP_SAVE_ARM_EWUPCT,
+ ARM_SLEEP_SAVE_ARM_RSTCT1,
+ ARM_SLEEP_SAVE_ARM_RSTCT2,
+ ARM_SLEEP_SAVE_ARM_SYSST,
+ ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+ DSP_SLEEP_SAVE_START = 0,
+ /*
+ * DSP registers 16 bits
+ */
+ DSP_SLEEP_SAVE_DSP_IDLECT2,
+ DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+ ULPD_SLEEP_SAVE_START = 0,
+ /*
+ * ULPD registers 16 bits
+ */
+ ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+ ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+ ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+ ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+ ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+ ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+ ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+ MPUI1510_SLEEP_SAVE_START = 0,
+ /*
+ * MPUI registers 32 bits
+ */
+ MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+ MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+ MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+ MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+ MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+ MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+ MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+ MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+ MPUI1510_SLEEP_SAVE_SIZE
+#else
+ MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+ MPUI730_SLEEP_SAVE_START = 0,
+ /*
+ * MPUI registers 32 bits
+ */
+ MPUI730_SLEEP_SAVE_MPUI_CTRL,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+ MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+ MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+ MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+ MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+ MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+ MPUI730_SLEEP_SAVE_SIZE
+#else
+ MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+ MPUI1610_SLEEP_SAVE_START = 0,
+ /*
+ * MPUI registers 32 bits
+ */
+ MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+ MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+ MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+ MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+ MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+ MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+ MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+ MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+ MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+ MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+ MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+ MPUI1610_SLEEP_SAVE_SIZE
+#else
+ MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+ OMAP24XX_SLEEP_SAVE_START = 0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+ OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+ OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+ OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
new file mode 100644
index 0000000..56eba0f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 0000000..787b7ac
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_DLLA_CTRL 0x060
+#define SDRC_DLLA_STATUS 0x064
+#define SDRC_DLLB_CTRL 0x068
+#define SDRC_DLLB_STATUS 0x06C
+#define SDRC_POWER 0x070
+#define SDRC_MR_0 0x084
+#define SDRC_RFR_CTRL_0 0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG 0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 0000000..cc6bfa5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE 0xfffb0000
+#define OMAP_UART2_BASE 0xfffb0800
+#define OMAP_UART3_BASE 0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS 3
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+#define is_omap_port(p) ({int __ret = 0; \
+ if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
+ p == IO_ADDRESS(OMAP_UART2_BASE) || \
+ p == IO_ADDRESS(OMAP_UART3_BASE)) \
+ __ret = 1; \
+ __ret; \
+ })
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
new file mode 100644
index 0000000..e093234
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 0000000..06a28c7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset() do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+ /*
+ * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+ * "Global Software Reset Affects Traffic Controller Frequency".
+ */
+ if (cpu_is_omap5912()) {
+ omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+ DPLL_CTL);
+ omap_writew(0x8, ARM_RSTCT1);
+ }
+
+ if (machine_is_voiceblue())
+ voiceblue_reset();
+ else
+ omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+ if (!cpu_is_omap24xx())
+ omap1_arch_reset(mode);
+ else
+ omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h
new file mode 100644
index 0000000..d2fcd78
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE 0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG (TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20)
+#define EMIFF_MRS (TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1 (TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3 (TCMIF_BASE + 0x30)
+#define TC_ENDIANISM (TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40)
+#define EMIFS_ACS0 (TCMIF_BASE + 0x50)
+#define EMIFS_ACS1 (TCMIF_BASE + 0x54)
+#define EMIFS_ACS2 (TCMIF_BASE + 0x58)
+#define EMIFS_ACS3 (TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define OMAP_CS0_PHYS 0x00000000
+#define OMAP_CS0_SIZE SZ_64M
+
+#define OMAP_CS1_PHYS 0x04000000
+#define OMAP_CS1_SIZE SZ_64M
+
+#define OMAP_CS1A_PHYS OMAP_CS1_PHYS
+#define OMAP_CS1A_SIZE SZ_32M
+
+#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define OMAP_CS1B_SIZE SZ_32M
+
+#define OMAP_CS2_PHYS 0x08000000
+#define OMAP_CS2_SIZE SZ_64M
+
+#define OMAP_CS2A_PHYS OMAP_CS2_PHYS
+#define OMAP_CS2A_SIZE SZ_32M
+
+#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define OMAP_CS2B_SIZE SZ_32M
+
+#define OMAP_CS3_PHYS 0x0c000000
+#define OMAP_CS3_SIZE SZ_64M
+
+#ifndef __ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR (1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
+#define OMAP_EMIFS_CONFIG_BM (1 << 1)
+#define OMAP_EMIFS_CONFIG_WP (1 << 0)
+
+#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear. Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+ ? OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+ ? 0 : OMAP_CS3_PHYS;
+}
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 0000000..6d35767
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE (HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 0000000..0814c5f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1 0x08 /* mode definition register */
+#define OMAP_ID_730 0x355F
+#define ID_MASK 0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+ volatile u8 * uart = 0;
+ int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+ return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+ uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+ uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+ /* Determine which serial port to use */
+ do {
+ /* MMU is not on, so cpu_is_omapXXXX() won't work here */
+ unsigned int omap_id = omap_get_id();
+
+ if (omap_id == OMAP_ID_730)
+ shift = 0;
+
+ if (check_port(uart, shift))
+ break;
+ /* Silent boot if no serial ports are enabled. */
+ return;
+ } while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+ /*
+ * Now, xmit each character
+ */
+ while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+ barrier();
+ uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
new file mode 100644
index 0000000..a56a610
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -0,0 +1,141 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef __ASM_ARCH_OMAP_USB_H
+#define __ASM_ARCH_OMAP_USB_H
+
+#include <mach/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE 0xfffb0400
+#define OMAP1_UDC_BASE 0xfffb4000
+#define OMAP1_OHCI_BASE 0xfffba000
+
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP2_UDC_BASE 0x4805e200
+#define OMAP2_OTG_BASE 0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE OMAP1_OTG_BASE
+#define UDC_BASE OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE OMAP2_OTG_BASE
+#define UDC_BASE OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV (OTG_BASE + 0x00)
+#define OTG_SYSCON_1 (OTG_BASE + 0x04)
+# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
+# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
+# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
+# define OTG_IDLE_EN (1 << 15)
+# define HST_IDLE_EN (1 << 14)
+# define DEV_IDLE_EN (1 << 13)
+# define OTG_RESET_DONE (1 << 2)
+# define OTG_SOFT_RESET (1 << 1)
+#define OTG_SYSCON_2 (OTG_BASE + 0x08)
+# define OTG_EN (1 << 31)
+# define USBX_SYNCHRO (1 << 30)
+# define OTG_MST16 (1 << 29)
+# define SRP_GPDATA (1 << 28)
+# define SRP_GPDVBUS (1 << 27)
+# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
+# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
+# define B_ASE_BRST(w) (((w)>>16)&0x07)
+# define SRP_DPW (1 << 14)
+# define SRP_DATA (1 << 13)
+# define SRP_VBUS (1 << 12)
+# define OTG_PADEN (1 << 10)
+# define HMC_PADEN (1 << 9)
+# define UHOST_EN (1 << 8)
+# define HMC_TLLSPEED (1 << 7)
+# define HMC_TLLATTACH (1 << 6)
+# define OTG_HMC(w) (((w)>>0)&0x3f)
+#define OTG_CTRL (OTG_BASE + 0x0c)
+# define OTG_USB2_EN (1 << 29)
+# define OTG_USB2_DP (1 << 28)
+# define OTG_USB2_DM (1 << 27)
+# define OTG_USB1_EN (1 << 26)
+# define OTG_USB1_DP (1 << 25)
+# define OTG_USB1_DM (1 << 24)
+# define OTG_USB0_EN (1 << 23)
+# define OTG_USB0_DP (1 << 22)
+# define OTG_USB0_DM (1 << 21)
+# define OTG_ASESSVLD (1 << 20)
+# define OTG_BSESSEND (1 << 19)
+# define OTG_BSESSVLD (1 << 18)
+# define OTG_VBUSVLD (1 << 17)
+# define OTG_ID (1 << 16)
+# define OTG_DRIVER_SEL (1 << 15)
+# define OTG_A_SETB_HNPEN (1 << 12)
+# define OTG_A_BUSREQ (1 << 11)
+# define OTG_B_HNPEN (1 << 9)
+# define OTG_B_BUSREQ (1 << 8)
+# define OTG_BUSDROP (1 << 7)
+# define OTG_PULLDOWN (1 << 5)
+# define OTG_PULLUP (1 << 4)
+# define OTG_DRV_VBUS (1 << 3)
+# define OTG_PD_VBUS (1 << 2)
+# define OTG_PU_VBUS (1 << 1)
+# define OTG_PU_ID (1 << 0)
+#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
+# define DRIVER_SWITCH (1 << 15)
+# define A_VBUS_ERR (1 << 13)
+# define A_REQ_TMROUT (1 << 12)
+# define A_SRP_DETECT (1 << 11)
+# define B_HNP_FAIL (1 << 10)
+# define B_SRP_TMROUT (1 << 9)
+# define B_SRP_DONE (1 << 8)
+# define B_SRP_STARTED (1 << 7)
+# define OPRT_CHG (1 << 0)
+#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
+ // same bits as in IRQ_EN
+#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
+# define OTGVPD (1 << 14)
+# define OTGVPU (1 << 13)
+# define OTGPUID (1 << 12)
+# define USB2VDR (1 << 10)
+# define USB2PDEN (1 << 9)
+# define USB2PUEN (1 << 8)
+# define USB1VDR (1 << 6)
+# define USB1PDEN (1 << 5)
+# define USB1PUEN (1 << 4)
+# define USB0VDR (1 << 2)
+# define USB0PDEN (1 << 1)
+# define USB0PUEN (1 << 0)
+#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
+#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
+# define CONF_USB2_UNI_R (1 << 8)
+# define CONF_USB1_UNI_R (1 << 7)
+# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
+# define CONF_USB0_ISOLATE_R (1 << 3)
+# define CONF_USB_PWRDN_DM_R (1 << 2)
+# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+/* OMAP2 */
+# define USB_UNIDIR 0x0
+# define USB_UNIDIR_TLL 0x1
+# define USB_BIDIR 0x2
+# define USB_BIDIR_TLL 0x3
+# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
+# define USBT2TLL5PI (1 << 17)
+# define USB0PUENACTLOI (1 << 16)
+# define USBSTANDBYCTRL (1 << 15)
+
+#endif /* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 0000000..dc104cd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ff1413e..1d7aec1 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
#include "mailbox.h"
static struct omap_mbox *mboxes;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f7406..d084405 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459..847df20 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
#include <asm/system.h>
#include <asm/io.h>
#include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 005261a..8bdbf97 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
#include <linux/clk.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define OCPI_BASE 0xfffec320
#define OCPI_FAULT (OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58..ac67eeb 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
#include <asm/mach/map.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
-#include <asm/arch/control.h>
+#include <mach/control.h>
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
# include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 359912f..777485e 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
#ifdef CONFIG_ARCH_OMAP1
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9..544d6b3 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/*
* Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 373d043..54d4b8e 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
#include <linux/mutex.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index a608aa3..1863a1b 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
#include <asm/plat-s3c/nand.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 05a1d9c..6d60f04 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/delay.h>
@@ -39,9 +39,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-serial.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 5c6f446..d6fb765 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/arch/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 8ae5719..08c2aaf 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
#include <asm/plat-s3c24xx/dma.h>
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ace8bec..dd27334 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
{
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6dd5211..849f846 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
struct s3c24xx_gpio_chip {
struct gpio_chip chip;
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index f524d76..36cefe1 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 9919419..e670501 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 0d044bc..fc4b731 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
#include <linux/serial_core.h>
#include <asm/cacheflush.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 489e32ab..ccfdc9d 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index a811e8b..8a5fffd 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
#include <linux/mutex.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2eefe16..f3dc38c 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index eb9dd4f..281b480 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
#include <asm/plat-s3c24xx/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 4f8756e..4981a08 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
#include <asm/plat-s3c/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b..b471a21 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
#include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
#include <asm/mach/time.h>
#include <asm/plat-s3c24xx/clock.h>
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c
index be85c6d..74e9cd8 100644
--- a/drivers/char/ds1620.c
+++ b/drivers/char/ds1620.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/smp_lock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/uaccess.h>
#include <asm/therm.h>
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index b4402b5..263567f 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -23,7 +23,7 @@
#include <linux/hw_random.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 42a107f..2d637e0 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -27,8 +27,8 @@
#include <crypto/authenc.h>
#include <crypto/scatterwalk.h>
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
#define MAX_KEYLEN 32
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 85bfeba..71fba82 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -33,7 +33,7 @@
#include <linux/memory.h>
#include <linux/ioport.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
#define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common)
#define to_iop_adma_device(dev) \
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 5ec60d1..75089fe 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d6194..c1adcdb 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -27,9 +27,9 @@
#include <asm/io.h>
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index eccbb74..5d77898 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,9 +36,9 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
/* ----- global defines ----------------------------------------------- */
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index bd0f3f4..05d72e9 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/arch/hardware.h> /* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index e06ccc6..ec15cff 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/i2c-pnx.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index d65b7fb..44d8384 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
struct pxa_i2c {
spinlock_t lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index b216bfb..c772e02 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,11 +35,11 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-iic.h>
#include <asm/plat-s3c/iic.h>
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1..18355ae 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
#include <linux/workqueue.h>
#include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
#ifndef DEBUG
@@ -94,7 +94,7 @@
/* board-specific PM hooks */
#include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index e3c12e3..176126d 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -43,8 +43,8 @@
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 8a3bb23..f728f29 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -16,7 +16,7 @@
#define DRV_NAME "ide_arm"
#ifdef CONFIG_ARCH_CLPS7500
-# include <asm/arch/hardware.h>
+# include <mach/hardware.h>
#
# define IDE_ARM_IO (ISASLOT_IO + 0x1f0)
# define IDE_ARM_IRQ IRQ_ISA_14
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index 8a77bfc..18222a6 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -20,8 +20,8 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/aaed2000.h>
+#include <mach/hardware.h>
+#include <mach/aaed2000.h>
#define KB_ROWS 12
#define KB_COLS 8
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 1aa46ae..134e67b 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -20,10 +20,10 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
#include <asm/hardware/scoop.h>
#define KB_ROWS 8
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index 63774b5..4e016d8 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -24,8 +24,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/jornada720.h>
-#include <asm/arch/hardware.h>
+#include <mach/jornada720.h>
+#include <mach/hardware.h>
MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index b796485..dcea87a 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -34,13 +34,13 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/errno.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#undef NEW_BOARD_LEARNING_MODE
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 8a92535..6d30c6d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -29,8 +29,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
/*
* Keypad Controller registers
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 1aa3718..de67b8e 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -20,10 +20,10 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
#define KB_ROWS 7
#define KB_COLS 11
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index b12b7ee..44cb50a 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -19,8 +19,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tosa.h>
+#include <mach/gpio.h>
+#include <mach/tosa.h>
#define KB_ROWMASK(r) (1 << (r))
#define SCANCODE(r, c) (((r)<<4) + (c) + 1)
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 7908f5c..9946d73 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -20,7 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("ixp4xx beeper driver");
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 536e3be..56c079e 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <linux/input.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/iomd.h>
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 22374d0..7f36edd3 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -35,7 +35,7 @@
#include <linux/platform_device.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/iomd.h>
#include <asm/system.h>
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index d0e13fc..65202c9 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -19,10 +19,10 @@
#include <linux/slab.h>
#include <linux/irq.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
#define PWR_MODE_ACTIVE 0
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 4f86081..4d3139e 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,8 +39,8 @@
#include <linux/delay.h>
/* SA1100 serial defines */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
#define DRIVER_DESC "H3600 touchscreen driver"
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 19f4077..bf44f9d 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -19,8 +19,8 @@
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/jornada720.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 590a137..283f93a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -33,7 +33,7 @@
#include <linux/interrupt.h>
#include <linux/wm97xx.h>
#include <linux/io.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#define VERSION "0.13"
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index c37bb0d..32c98b2 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
/*
* Our context
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
index accc7ed..836a43d 100644
--- a/drivers/leds/leds-cm-x270.c
+++ b/drivers/leds/leds-cm-x270.c
@@ -18,8 +18,8 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#define GPIO_RED_LED (93)
#define GPIO_GREEN_LED (94)
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
index e9d419f..bc2dcd8 100644
--- a/drivers/leds/leds-corgi.c
+++ b/drivers/leds/leds-corgi.c
@@ -15,9 +15,9 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#include <asm/hardware/scoop.h>
static void corgiled_amber_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index a7421b8..be0e121 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,7 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
static short __iomem *latch_address;
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 5227585..11b77a7 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,9 +16,9 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
/*
* Green led.
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 17ebfe2..5d91362 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -13,7 +13,7 @@
#include <linux/device.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/locomo.h>
static void locomoled_brightness_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index cb74c18..25a07f2 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,9 +16,9 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
/* our context */
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
index e75e854..178831c 100644
--- a/drivers/leds/leds-spitz.c
+++ b/drivers/leds/leds-spitz.c
@@ -17,9 +17,9 @@
#include <linux/leds.h>
#include <asm/hardware/scoop.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/spitz.h>
static void spitzled_amber_set(struct led_classdev *led_cdev,
enum led_brightness value)
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b15f82c..5e7ebca 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -36,8 +36,8 @@
#include <linux/videodev2.h>
#include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/camera.h>
+#include <mach/pxa-regs.h>
+#include <mach/camera.h>
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
#define PXA_CAM_DRV_NAME "pxa27x-camera"
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 6a2a2a8..28380b2 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -21,12 +21,12 @@
#include <linux/platform_device.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/system.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
#include "mcp.h"
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index a675411..a316f1b 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -26,7 +26,7 @@
#include <linux/mutex.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "ucb1x00.h"
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index ad34e2d..44762ca 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,7 +32,7 @@
#include <linux/kthread.h>
#include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach-types.h>
#include "ucb1x00.h"
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f15e206..6915f40 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -73,9 +73,9 @@
#include <asm/gpio.h>
#include <asm/mach/mmc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91_mci.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91_mci.h>
#define DRIVER_NAME "at91_mci"
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index f61406d..2f0fcdb 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -42,8 +42,8 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/mmc.h>
+#include <mach/imx-dma.h>
#include "imxmmc.h"
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 1f587a2..c160288 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x04
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index a8e18fe..55093ad 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -31,8 +31,8 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/mmc.h>
#include "pxamci.h"
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index be550c2..7c994e1 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -18,8 +18,8 @@
#include <asm/dma.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-sdi.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/mci.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index f199b16..5366418 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -25,8 +25,8 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/hardware.h>
+#include <mach/autcpu12.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index cb507da..e5059aa 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -9,7 +9,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 468204c..60e68bd 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -25,7 +25,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/sizes.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 873ff15..35fef65 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -16,7 +16,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index d0282ce..7100ee3 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -37,7 +37,7 @@
#include <linux/mtd/partitions.h>
#include <asm/mach/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index 6447e8b..ed58f6a 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -24,8 +24,8 @@
#include <linux/mtd/concat.h>
#endif
-#include <asm/arch/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
#include <asm/io.h>
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index 33b583e..dcdb1f1 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -30,7 +30,7 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/flash.h>
#include <linux/reboot.h>
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 771e680..05f276a 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -43,9 +43,9 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/flash.h>
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index fe070cc..771139c 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -19,7 +19,7 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 7fc3204..7df6bbf 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -18,7 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a0ba07c..26d4298 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -22,10 +22,10 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/board-ams-delta.h>
/*
* MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99aec46..3387e0d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -32,8 +32,8 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
#define hard_ecc 1
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 553dd7e..7c95da1 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -32,9 +32,9 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
/*
* MTD structure for AUTCPU12 board
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fc8529b..9eba3f0 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,8 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 387e435..86366bf 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -23,7 +23,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
#include <asm/sizes.h>
#include <asm/hardware/clps7111.h>
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9e59de5..f8ce79b 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -24,10 +24,10 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
#include <asm/sizes.h>
-#include <asm/arch/h1900-gpio.h>
-#include <asm/arch/ipaq.h>
+#include <mach/h1900-gpio.h>
+#include <mach/ipaq.h>
/*
* MTD structure for EDB7312 board
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index ee2ac39..6400248 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -18,7 +18,7 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-orion/orion_nand.h>
#ifdef CONFIG_MTD_CMDLINE_PARTS
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fe2bc7e..a64ad15 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,8 +22,8 @@
#include <linux/irq.h>
#include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 18d2cd3..30a518e2 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -21,7 +21,7 @@
#include <linux/mtd/partitions.h>
#include <linux/interrupt.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
static void __iomem *sharpsl_io_base;
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 807a727..2c410a0 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -25,7 +25,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0ece4f9..aa4a524 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -28,7 +28,7 @@
#include <linux/bitops.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index ffae266..0fa5346 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -32,9 +32,9 @@
#include <asm/uaccess.h>
#include <asm/mach-types.h>
-#include <asm/arch/at91rm9200_emac.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/at91rm9200_emac.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 18d3eeb..1267444 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -20,8 +20,8 @@
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <asm/arch/ep93xx-regs.h>
-#include <asm/arch/platform.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
#include <asm/io.h>
#define DRV_MODULE_NAME "ep93xx-eth"
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 9b777d9..020771b 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -32,8 +32,8 @@
#include <linux/kernel.h>
#include <linux/mii.h>
#include <linux/platform_device.h>
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
#define DEBUG_QUEUES 0
#define DEBUG_DESC 0
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index fba87ab..ea6144a 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -189,7 +189,7 @@
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX010X)
#include <asm/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c
index 2f89d47..f83c5b8 100644
--- a/drivers/net/irda/ep7211-sir.c
+++ b/drivers/net/irda/ep7211-sir.c
@@ -14,7 +14,7 @@
#include <net/irda/irda_device.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "sir-dev.h"
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index f76b0b6..4aa61a1 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,8 +23,8 @@
#include <net/irda/irda_device.h>
#include <asm/dma.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/irda.h>
+#include <mach/pxa-regs.h>
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index d16594a..a951889 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -37,7 +37,7 @@
#include <asm/irq.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/irda.h>
static int power_level = 3;
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
index 65267c9..f5ffd7e 100644
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -13,8 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ixp2000-regs.h>
+#include <mach/hardware.h>
+#include <mach/ixp2000-regs.h>
#include <asm/delay.h>
#include <asm/io.h>
#include "ixp2400-msf.h"
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index daba82b..84c77f1 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -21,8 +21,8 @@
#include <linux/platform_device.h>
#include <linux/phy.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#include "macb.h"
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index f2655ce..3f9af75 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -29,11 +29,11 @@
#include <linux/mii.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
-#include <asm/arch/xc.h>
-#include <asm/arch/eth.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
+#include <mach/xc.h>
+#include <mach/eth.h>
/* XC Fifo Offsets */
#define EMPTY_PTR_FIFO(xcno) (0 + ((xcno) << 3)) /* Index of the empty pointer FIFO */
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 76c17c2..2abfc28 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -222,7 +222,7 @@
*/
#include <linux/dma-mapping.h>
#include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 22209b6..997e7f1 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -187,7 +187,7 @@
#elif defined(CONFIG_SA1100_ASSABET)
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
/* We can only do 8-bit reads and writes in the static memory space. */
#define SMC_CAN_USE_8BIT 1
@@ -339,7 +339,7 @@
* IOBARRIER on entry to their ISR.
*/
-#include <asm/arch/constants.h> /* IOBARRIER_VIRT */
+#include <mach/constants.h> /* IOBARRIER_VIRT */
#define SMC_CAN_USE_8BIT 0
#define SMC_CAN_USE_16BIT 1
@@ -525,7 +525,7 @@
*/
#include <linux/dma-mapping.h>
#include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#ifdef SMC_insl
#undef SMC_insl
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index ab6b4be..a0ffb8e 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -18,13 +18,13 @@
#include <pcmcia/ss.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
/*
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 36cf9bc..f373639 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -19,12 +19,12 @@
#include <pcmcia/ss.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ff5e3f3..1b07af5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -24,12 +24,12 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bb95db7..bcff5cf 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,7 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 64f709d..37ec55d 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -21,11 +21,11 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index b0dcda4..877001d 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,12 +21,12 @@
#include <pcmcia/ss.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 4abde19..a8771ff 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -16,8 +16,8 @@
#include <asm/mach-types.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/palmtx.h>
+#include <mach/gpio.h>
+#include <mach/palmtx.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 58395bf..1cd02f5 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 71fbb62..f424146 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -11,11 +11,11 @@
#include <linux/device.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/signal.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
#include "sa1100_generic.h"
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index a34279a..1ca9737 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -18,9 +18,9 @@
#include <linux/errno.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index bd843bf..63e6bc4 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -11,10 +11,10 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/arch/cerf.h>
+#include <mach/cerf.h>
#include "sa1100_generic.h"
#define CERF_SOCKET 1
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 9017b13..6de4e1b 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -11,10 +11,10 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
#include "sa1100_generic.h"
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 15c31db..57ca085 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -10,7 +10,7 @@
#include <linux/errno.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index ace391b..4c41e86 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -9,9 +9,9 @@
#include <linux/errno.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
#include <asm/hardware/sa1111.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 16b0427..46d8c19 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -9,9 +9,9 @@
#include <linux/device.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/shannon.h>
+#include <mach/shannon.h>
#include <asm/irq.h>
#include "sa1100_generic.h"
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 6e6e986..33a08ae 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -9,10 +9,10 @@
#include <linux/device.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
#include "sa1100_generic.h"
extern long get_cs3_shadow(void);
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 432c061..6924d0e 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -14,7 +14,7 @@
#include <pcmcia/ss.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7d48201..7cb1273 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -37,7 +37,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 95dff38..c48f3f6 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -43,7 +43,7 @@
#include <linux/spinlock.h>
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -51,7 +51,7 @@
/* FIXME: platform dependent resource declaration has to move out of this file */
#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#endif
#ifdef DEBUG
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
index 244bb27..7035bfa 100644
--- a/drivers/power/palmtx_battery.c
+++ b/drivers/power/palmtx_battery.c
@@ -22,7 +22,7 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <asm/arch/palmtx.h>
+#include <mach/palmtx.h>
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
index bf664fb..2eab35a 100644
--- a/drivers/power/tosa_battery.c
+++ b/drivers/power/tosa_battery.c
@@ -19,7 +19,7 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
static struct work_struct bat_work;
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cd32d05..4e888cc 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,7 +29,7 @@
#include <linux/completion.h>
#include <asm/uaccess.h>
-#include <asm/arch/at91_rtc.h>
+#include <mach/at91_rtc.h>
#define AT91_RTC_FREQ 1
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index f0246ef..2133f37 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
-#include <asm/arch/board.h>
-#include <asm/arch/at91_rtt.h>
+#include <mach/board.h>
+#include <mach/at91_rtt.h>
/*
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 9ab53ec..36e4ac0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x))
#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 8054112..e7d19b6 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/log2.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index a0982d6..66a9bb8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -31,11 +31,11 @@
#include <linux/pm.h>
#include <linux/bitops.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#endif
#define TIMER_FREQ CLOCK_TICK_RATE
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 075df19..22171b2 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -8,7 +8,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#if defined(__APCS_32__)
#define LOADREGS(t,r,l...) ldm##t r, l
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 73d7773..f31c669 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -19,7 +19,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/dec21285.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define BAUD_BASE (mem_fclk_21285/64)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 1fee12c..3a6da80 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
#include <asm/io.h>
#include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 44d5d26..459f342 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -39,7 +39,7 @@
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index db3a2df5..6a29f93 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -44,8 +44,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
/* Register definitions */
#define URXD0 0x0 /* Receiver Register */
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index edbb85a..3f48932 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -35,8 +35,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_NX_MAJOR 204
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 033767b..f7a0d37 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -45,9 +45,9 @@
#include <linux/clk.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
struct uart_pxa_port {
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index 525130d..c8b4266 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -17,10 +17,10 @@
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index f9630c6..40a2531 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index b4c0bb5..d017031 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index ea34faa..d4a2b17 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 6c37a58..b24a25e 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -39,7 +39,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 5b964d4..5a88b3f9 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -45,10 +45,10 @@
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 0edbc5d..b9cbfc8 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -26,8 +26,8 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-uart.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-uart.h>
+#include <mach/regs-irq.h>
#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 95190c6..02f9320 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -20,9 +20,9 @@
#include <linux/spi/spi.h>
#include <asm/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
#include "atmel_spi.h"
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index f6f987b..9d2186f 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -35,8 +35,8 @@
#include <linux/spi/spi.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/dma.h>
+#include <mach/clock.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index e7588e1..5515eb9 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -47,12 +47,12 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omap730.h> /* OMAP730_IO_CONF registers */
+#include <mach/mux.h>
+#include <mach/omap730.h> /* OMAP730_IO_CONF registers */
/* FIXME address is now a platform device resource,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 70786f5..34c7c98 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -34,11 +34,11 @@
#include <asm/delay.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 8d7c902..61ba147 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -35,9 +35,9 @@
#include <asm/irq.h>
#include <asm/delay.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-dma.h>
-#include <asm/arch/spi_imx.h>
+#include <mach/hardware.h>
+#include <mach/imx-dma.h>
+#include <mach/spi_imx.h>
/*-------------------------------------------------------------------------*/
/* SPI Registers offsets from peripheral base address */
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 89da39f..98abc73 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -25,11 +25,11 @@
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/spi.h>
+#include <mach/spi.h>
struct s3c24xx_spi {
/* bitbang has to be first */
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index d44fd0a..cc1f647 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -21,9 +21,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/spi-gpio.h>
+#include <mach/hardware.h>
struct s3c2410_spigpio {
struct spi_bitbang bitbang;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 5b935e9e..a8a1de4 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -40,15 +40,15 @@
#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9261_matrix.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9261_matrix.h>
#include "at91_udc.h"
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 07e5a0b..ae30ab1 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,7 +22,7 @@
#include <linux/delay.h>
#include <asm/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#include "atmel_usba_udc.h"
@@ -334,7 +334,7 @@
#elif defined(CONFIG_ARCH_AT91)
-#include <asm/arch/at91_pmc.h>
+#include <mach/at91_pmc.h>
static void toggle_bias(int is_on)
{
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index fd43b90..ca86120 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -47,7 +47,7 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 395bd18..376e80c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,8 +52,8 @@
#include <asm/unaligned.h>
#include <asm/mach-types.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/usb.h>
+#include <mach/dma.h>
+#include <mach/usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 7e6725d..da6e93c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -61,7 +61,7 @@
* This driver is PXA25x only. Grab the right register definitions.
*/
#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa25x-udc.h>
+#include <mach/pxa25x-udc.h>
#endif
#include <asm/mach/udc_pxa2xx.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index c8a1321..1d51aa2 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -139,7 +139,7 @@
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_LUBBOCK
-#include <asm/arch/lubbock.h>
+#include <mach/lubbock.h>
/* lubbock can also report usb connect/disconnect irqs */
#endif
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 06c81a3..a28513e 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -33,13 +33,13 @@
#include <linux/irq.h>
#include <asm/byteorder.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/udc.h>
#include "pxa27x_udc.h"
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 021955a..5388073 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -49,10 +49,10 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/regs-udc.h>
#include <asm/plat-s3c24xx/udc.h>
@@ -887,7 +887,7 @@
}
}
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
/*
* s3c2410_udc_irq - interrupt handler
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 389a8f1..6db7a28 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -15,11 +15,11 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#ifndef CONFIG_ARCH_AT91
#error "CONFIG_ARCH_AT91 must be defined."
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 4d628a9..cb0b506 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,7 +28,7 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
static struct clk *usb_host_clock;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 020769b..9e31d44 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/signal.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
extern int usb_disabled(void);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9b7e910..94dfca0 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -19,15 +19,15 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/usb.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
+#include <mach/usb.h>
/* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index ff4d928..b02cd07 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -21,12 +21,12 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 3eb2c28..8c9c484 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,10 +24,10 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/ohci.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/ohci.h>
#define PXA_UHC_MAX_PORTNUM 3
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 358100c..9e3dc40 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -22,8 +22,8 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb-control.h>
+#include <mach/hardware.h>
+#include <mach/usb-control.h>
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index a3a8fea..4626b00 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -13,10 +13,10 @@
* This file is licenced under the GPL.
*/
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/badge4.h>
+#include <mach/assabet.h>
+#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index bad26c6..61c3d3f 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -29,7 +29,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -339,7 +339,7 @@
#endif
#ifdef HAS_VIDC20
-#include <asm/arch/acornfb.h>
+#include <mach/acornfb.h>
#define MAX_SIZE 2*1024*1024
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
index 32dd851..0c35b8b 100644
--- a/drivers/video/am200epd.c
+++ b/drivers/video/am200epd.c
@@ -33,7 +33,7 @@
#include <video/metronomefb.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
/* register offsets for gpio control */
#define LED_GPIO_PIN 51
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5b3a15d..e7018a2 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -18,9 +18,9 @@
#include <linux/delay.h>
#include <linux/backlight.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
#include <video/atmel_lcdc.h>
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 891875d..cbad67e8 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -25,9 +25,9 @@
#include <linux/fb.h>
#include <linux/backlight.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
index 3701caa..16f5db4 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -27,12 +27,12 @@
#include <linux/proc_fs.h>
#include <linux/delay.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/uaccess.h>
#include <asm/hardware/clps7111.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
struct fb_info *cfb;
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index d0e4cb6..41d6263 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@
#ifdef CONFIG_ARCH_SHARK
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
static int __devinit cyberpro_vl_probe(void)
{
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index cc2810ef..2735b79 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -71,7 +71,7 @@
#if defined(CONFIG_ARM)
# ifdef CONFIG_ARCH_CEIVA
-# include <asm/arch/hardware.h>
+# include <mach/hardware.h>
# define EPSON1355FB_BASE_PHYS (CEIVA_PHYS_SED1355)
# endif
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index d28879f..ccd9861 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,9 +33,9 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/arch/imxfb.h>
+#include <mach/imxfb.h>
/*
* Complain if VAR is out of range.
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index 4d8ad9c..9dfcf39 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -26,9 +26,9 @@
#include <linux/delay.h>
#include <linux/clk.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/blizzard.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
#include "dispc.h"
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index ab77c51..6efcf89 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -25,9 +25,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
+#include <mach/board.h>
#include "dispc.h"
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 1e642b7..f24df0b 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -26,9 +26,9 @@
#include <linux/delay.h>
#include <linux/clk.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/hwa742.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/hwa742.h>
#define HWA742_REV_CODE_REG 0x0
#define HWA742_CONFIG_REG 0x2
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 31e9783..2486237 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,8 +23,8 @@
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index fd6f0eb..88c19d4 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index 551f385..6953ed4 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,8 +23,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
static int innovator1510_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 5ef119c..6a42c6a 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,8 +22,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index a380388..a4a725f 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,9 +23,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 52bdfda..2183173 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,8 +23,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
static int palmte_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index 4bb349f..57b0f6c 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,8 +29,8 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
static int palmtt_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
index ea6170d..d33d78b 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
static int palmz71_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
index c4f306a..caa6a89 100644
--- a/drivers/video/omap/lcd_sx1.c
+++ b/drivers/video/omap/lcd_sx1.c
@@ -23,10 +23,10 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
+#include <mach/mcbsp.h>
+#include <mach/mux.h>
/*
* OMAP310 GPIO registers
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index fb19ed4..83514f0 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,8 +29,8 @@
#include <linux/vmalloc.h>
#include <linux/clk.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index d9abc48..51a138b 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,8 +28,8 @@
#include <linux/mm.h>
#include <linux/uaccess.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
#define MODULE_NAME "omapfb"
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 789cfd2..4a6f13d 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,7 +27,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
#include "dispc.h"
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index fafd0f2..6359353 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -24,8 +24,8 @@
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
#include "lcdc.h"
diff --git a/drivers/video/pnx4008/dum.h b/drivers/video/pnx4008/dum.h
index d80a614..1234d43 100644
--- a/drivers/video/pnx4008/dum.h
+++ b/drivers/video/pnx4008/dum.h
@@ -12,7 +12,7 @@
#ifndef __PNX008_DUM_H__
#define __PNX008_DUM_H__
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
#define PNX4008_DUMCONF_VA_BASE IO_ADDRESS(PNX4008_DUMCONF_BASE)
#define PNX4008_DUM_MAIN_VA_BASE IO_ADDRESS(PNX4008_DUM_MAINCFG_BASE)
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index d23bf0d..2aa09bc 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <asm/uaccess.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#include "sdum.h"
#include "fbcommon.h"
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3169ea4..e7aa7ae 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,14 +45,14 @@
#include <linux/kthread.h>
#include <linux/freezer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
/*
* Complain if VAR is out of range.
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index f059896..79cf0b1 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -29,9 +29,9 @@
#include <asm/div64.h>
#include <asm/mach/map.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/fb.h>
#ifdef CONFIG_PM
#include <linux/pm.h>
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8fbcce6..c052bd4 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -177,11 +177,11 @@
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/shannon.h>
+#include <mach/assabet.h>
+#include <mach/shannon.h>
/*
* debugging?
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 9ff9a95..bf872aa 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -21,7 +21,7 @@
#include <linux/types.h>
#include <linux/watchdog.h>
#include <asm/uaccess.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 2ec36e0..003dffe 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 7476844..af8ef14 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -29,7 +29,7 @@
#include <linux/watchdog.h>
#include <linux/timer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#define WDT_VERSION "0.3"
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index d37146f..1946dd0 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -32,7 +32,7 @@
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
static int nowayout = WATCHDOG_NOWAYOUT;
static unsigned long wdt_status;
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 884c2b4..4226dae 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -26,7 +26,7 @@
#include <linux/init.h>
#include <linux/bitops.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
static int nowayout = WATCHDOG_NOWAYOUT;
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index d4d37da..2313fad 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <linux/bitops.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
static int nowayout = WATCHDOG_NOWAYOUT;
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index df5a6b8..d21a640 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,7 +21,7 @@
#include <linux/watchdog.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/arch/regs-timer.h>
+#include <mach/regs-timer.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 6dfb9cf..74a10d5 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -43,9 +43,9 @@
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
-#include <asm/arch/prcm.h>
+#include <mach/prcm.h>
#include "omap_wdt.h"
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 11a2067..f431a04 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -29,7 +29,7 @@
#include <linux/clk.h>
#include <linux/spinlock.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 97b4a2e..f1fe800 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -49,7 +49,7 @@
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
#undef S3C_VA_WATCHDOG
#define S3C_VA_WATCHDOG (0)
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index d985cba..52a533c 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -28,10 +28,10 @@
#include <linux/bitops.h>
#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
#endif
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/uaccess.h>
#define OSCR_FREQ CLOCK_TICK_RATE
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index 00cd6f2..94e2d91 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -29,7 +29,7 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/hardware/dec21285.h>
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
deleted file mode 100644
index a6d1ee0..0000000
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/aaec2000.h
- *
- * AAEC-2000 registers definition
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAEC2000_H
-#define __ASM_ARCH_AAEC2000_H
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not this file
-#endif /* __ASM_ARCH_HARDWARE_H */
-
-/* Chip selects */
-#define AAEC_CS0 0x00000000
-#define AAEC_CS1 0x10000000
-#define AAEC_CS2 0x20000000
-#define AAEC_CS3 0x30000000
-
-/* Flash */
-#define AAEC_FLASH_BASE AAEC_CS0
-#define AAEC_FLASH_SIZE SZ_64M
-
-/* Interrupt controller */
-#define IRQ_BASE __REG(0x80000500)
-#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
-#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
-#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
-#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
-
-/* UART 1 */
-#define UART1_BASE __REG(0x80000600)
-#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
-#define UART1_LCR __REG(0x80000604) /* Link Control Register */
-#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
-#define UART1_CR __REG(0x8000060c) /* Control Register */
-#define UART1_SR __REG(0x80000610) /* Status Register */
-#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
-#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
-#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
-
-/* UART 2 */
-#define UART2_BASE __REG(0x80000700)
-#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
-#define UART2_LCR __REG(0x80000704) /* Link Control Register */
-#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
-#define UART2_CR __REG(0x8000070c) /* Control Register */
-#define UART2_SR __REG(0x80000710) /* Status Register */
-#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
-#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
-#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
-
-/* UART 3 */
-#define UART3_BASE __REG(0x80000800)
-#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
-#define UART3_LCR __REG(0x80000804) /* Link Control Register */
-#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
-#define UART3_CR __REG(0x8000080c) /* Control Register */
-#define UART3_SR __REG(0x80000810) /* Status Register */
-#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
-#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
-#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
-
-/* These are used in some places */
-#define _UART1_BASE __PREG(UART1_BASE)
-#define _UART2_BASE __PREG(UART2_BASE)
-#define _UART3_BASE __PREG(UART3_BASE)
-
-/* UART Registers Offsets */
-#define UART_DR 0x00
-#define UART_LCR 0x04
-#define UART_BRCR 0x08
-#define UART_CR 0x0c
-#define UART_SR 0x10
-#define UART_INT 0x14
-#define UART_INTM 0x18
-#define UART_INTRES 0x1c
-
-/* UART_LCR Bitmask */
-#define UART_LCR_BRK (1 << 0) /* Send Break */
-#define UART_LCR_PEN (1 << 1) /* Parity Enable */
-#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
-#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
-#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
-#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
-#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
-#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
-#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
-
-/* UART_CR Bitmask */
-#define UART_CR_EN (1 << 0) /* UART Enable */
-#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
-#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
-#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
-#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
-#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
-#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
-
-/* UART_SR Bitmask */
-#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
-#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
-#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
-#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
-#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
-#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
-#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
-#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
-
-/* UART_INT Bitmask */
-#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
-#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
-#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
-#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
-
-/* Timer 1 */
-#define TIMER1_BASE __REG(0x80000c00)
-#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
-#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
-#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
-#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
-
-/* Timer 2 */
-#define TIMER2_BASE __REG(0x80000d00)
-#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
-#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
-#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
-#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
-
-/* Timer 3 */
-#define TIMER3_BASE __REG(0x80000e00)
-#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
-#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
-#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
-#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
-
-/* Timer Control register bits */
-#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */
-#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
-#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
-#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
-#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
-
-/* Power and State Control */
-#define POWER_BASE __REG(0x80000400)
-#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
-#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
-#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
-#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
-#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
-#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
-#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
-#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
-#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
-
-/* GPIO Registers */
-#define AAEC_GPIO_PHYS 0x80000e00
-
-#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
-#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
-#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
-#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
-#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
-#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
-#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
-#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
-#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
-#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
-#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
-#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
-#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
-#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
-#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
-#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
-#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
-#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
-#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
-#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
-#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
-#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
-#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
-#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
-#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
-#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
-#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
-#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
-#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
-#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
-#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
-#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
-#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
-#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
-
-#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
-#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
-#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
-#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
-
-/* LCD Controller */
-#define AAEC_CLCD_PHYS 0x80003000
-
-#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
deleted file mode 100644
index bc76d2b..0000000
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/aaed2000.h
- *
- * AAED-2000 specific bits definition
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAED2000_H
-#define __ASM_ARCH_AAED2000_H
-
-/* External GPIOs. */
-
-#define EXT_GPIO_PBASE AAEC_CS3
-#define EXT_GPIO_VBASE 0xf8100000
-#define EXT_GPIO_LENGTH 0x00001000
-
-#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
-#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
-
-#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
-#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
-
-#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
-
-#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
-#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
-#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
-#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
-#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
-#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
-#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
-#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
-
-
-#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
deleted file mode 100644
index 7b1fce0..0000000
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/include/asm-arm/arch-aaec2000/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "hardware.h"
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x80000000 @ physical
- movne \rx, #io_p2v(0x80000000) @ virtual
- orr \rx, \rx, #0x00000800
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x10]
- tst \rd, #(1 << 7)
- beq 1002b
- .endm
-
- .macro waituart,rd,rx
-#if 0
-1001: ldr \rd, [\rx, #0x10]
- tst \rd, #(1 << 5)
- beq 1001b
-#endif
- .endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
deleted file mode 100644
index e100b1e..0000000
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/dma.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
deleted file mode 100644
index 83fdf68..0000000
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/entry-macro.S
- *
- * Low-level IRQ helper for aaec-2000 based platforms
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <asm/arch/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #0xf8000000
- add r4, r4, #0x00000500
- mov \base, r4
- ldr \irqstat, [\base, #0]
- cmp \irqstat, #0
- bne 1001f
- ldr \irqnr, =NR_IRQS+1
- b 1003f
-1001: mov \irqnr, #0
-1002: ands \tmp, \irqstat, #1
- mov \irqstat, \irqstat, LSR #1
- add \irqnr, \irqnr, #1
- beq 1002b
- sub \irqnr, \irqnr, #1
-1003:
- .endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
deleted file mode 100644
index 153506f..0000000
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/hardware.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE 0x80000000
-#define VIO_APB_BASE 0xf8000000
-#define IO_APB_LENGTH 0x2000
-#define PIO_AHB_BASE 0x80002000
-#define VIO_AHB_BASE 0xf8002000
-#define IO_AHB_LENGTH 0x2000
-
-#define VIO_BASE VIO_APB_BASE
-#define PIO_BASE PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x) (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x) (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x) io_p2v(x)
-#define __PREG(x) io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
deleted file mode 100644
index bc2364ab..0000000
--- a/include/asm-arm/arch-aaec2000/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
deleted file mode 100644
index de25222..0000000
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/irqs.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ 3 /* Media Changed Interrupt */
-#define INT_SC 4 /* Sound Codec Interrupt */
-#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
-#define INT_TICK 11 /* 64Hz Tick Interrupt */
-#define INT_UART1 12 /* UART1 Interrupt */
-#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD 14 /* LCD Interrupt */
-#define INT_SSI 15 /* SSI End of Transfer Interrupt */
-#define INT_UART3 16 /* UART3 Interrupt */
-#define INT_SCI 17 /* SCI Interrupt */
-#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC 19 /* MMC Interrupt */
-#define INT_USB 20 /* USB Interrupt */
-#define INT_DMA 21 /* DMA Interrupt */
-#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI 27 /* BMI Interrupt */
-
-#define NR_IRQS (INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
deleted file mode 100644
index 9eceb41..0000000
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/memory.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PHYS_OFFSET UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * The nodes are the followings:
- *
- * node 0: 0xf000.0000 - 0xf3ff.ffff
- * node 1: 0xf400.0000 - 0xf7ff.ffff
- * node 2: 0xf800.0000 - 0xfbff.ffff
- * node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS 26
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
deleted file mode 100644
index 08de97b..0000000
--- a/include/asm-arm/arch-aaec2000/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaed2000/system.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
deleted file mode 100644
index f5708b3..0000000
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/timex.h
- *
- * AAEC-2000 Architecture timex specification
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE 508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
deleted file mode 100644
index 300f4bf..0000000
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/uncompress.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
- unsigned long serial_port;
- do {
- serial_port = _UART3_BASE;
- if (UART(UART_CR) & UART_CR_EN) break;
- serial_port = _UART1_BASE;
- if (UART(UART_CR) & UART_CR_EN) break;
- serial_port = _UART2_BASE;
- if (UART(UART_CR) & UART_CR_EN) break;
- return;
- } while (0);
-
- /* wait for space in the UART's transmitter */
- while ((UART(UART_SR) & UART_SR_TxFF))
- barrier();
-
- /* send the character out. */
- UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
deleted file mode 100644
index ecb991e..0000000
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/vmalloc.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h
deleted file mode 100644
index 6d71ea26..0000000
--- a/include/asm-arm/arch-at91/at91_adc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR 0x00 /* Control Register */
-#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
-#define AT91_ADC_START (1 << 1) /* Start Conversion */
-
-#define AT91_ADC_MR 0x04 /* Mode Register */
-#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
-#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
-#define AT91_ADC_TRGSEL_TC0 (0 << 1)
-#define AT91_ADC_TRGSEL_TC1 (1 << 1)
-#define AT91_ADC_TRGSEL_TC2 (2 << 1)
-#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
-#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
-#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
-#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
-#define AT91_ADC_PRESCAL_(x) ((x) << 8)
-#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */
-#define AT91_ADC_STARTUP_(x) ((x) << 16)
-#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
-#define AT91_ADC_SHTIM_(x) ((x) << 24)
-
-#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
-#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
-#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
-#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
-
-#define AT91_ADC_SR 0x1C /* Status Register */
-#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
-#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
-#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
-#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
-#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
-#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
-
-#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
-#define AT91_ADC_LDATA (0x3ff)
-
-#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
-
-#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
-#define AT91_ADC_DATA (0x3ff)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
deleted file mode 100644
index df44c12..0000000
--- a/include/asm-arm/arch-at91/at91_aic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
-#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
-#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
-#define AT91_AIC_SRCTYPE_LOW (0 << 5)
-#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
-#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
-#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-
-#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
-#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
-#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
-#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
-#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
-#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
-#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-
-#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
-#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
-#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
-#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-
-#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
deleted file mode 100644
index 8019ffd..0000000
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#ifdef AT91_DBGU
-#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
-#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
-#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
-#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
-#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
-#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
-#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
-#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
-
-#endif /* AT91_DBGU */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
-#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
-#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
-#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
-#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
-#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
-#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
-#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
-#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
-#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
-#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
-#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
-#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
-#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
-#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
-#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
-#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
-#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
-#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
-#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
-#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
deleted file mode 100644
index 400ec10..0000000
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR 0x00 /* Control Register */
-#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
-#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
-#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
-#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
-#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_MCI_MR 0x04 /* Mode Register */
-#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
-#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
-#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
-#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
-#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
-#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
-#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-
-#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
-#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
-#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
-#define AT91_MCI_DTOMUL_1 (0 << 4)
-#define AT91_MCI_DTOMUL_16 (1 << 4)
-#define AT91_MCI_DTOMUL_128 (2 << 4)
-#define AT91_MCI_DTOMUL_256 (3 << 4)
-#define AT91_MCI_DTOMUL_1K (4 << 4)
-#define AT91_MCI_DTOMUL_4K (5 << 4)
-#define AT91_MCI_DTOMUL_64K (6 << 4)
-#define AT91_MCI_DTOMUL_1M (7 << 4)
-
-#define AT91_MCI_SDCR 0x0c /* SD Card Register */
-#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
-#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR 0x10 /* Argument Register */
-
-#define AT91_MCI_CMDR 0x14 /* Command Register */
-#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
-#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
-#define AT91_MCI_RSPTYP_NONE (0 << 6)
-#define AT91_MCI_RSPTYP_48 (1 << 6)
-#define AT91_MCI_RSPTYP_136 (2 << 6)
-#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
-#define AT91_MCI_SPCMD_NONE (0 << 8)
-#define AT91_MCI_SPCMD_INIT (1 << 8)
-#define AT91_MCI_SPCMD_SYNC (2 << 8)
-#define AT91_MCI_SPCMD_ICMD (4 << 8)
-#define AT91_MCI_SPCMD_IRESP (5 << 8)
-#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
-#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
-#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
-#define AT91_MCI_TRCMD_NONE (0 << 16)
-#define AT91_MCI_TRCMD_START (1 << 16)
-#define AT91_MCI_TRCMD_STOP (2 << 16)
-#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
-#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
-#define AT91_MCI_TRTYP_BLOCK (0 << 19)
-#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
-#define AT91_MCI_TRTYP_STREAM (2 << 19)
-
-#define AT91_MCI_BLKR 0x18 /* Block Register */
-#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
-#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
-
-#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
-#define AT91_MCR_RDR 0x30 /* Receive Data Register */
-#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
-
-#define AT91_MCI_SR 0x40 /* Status Register */
-#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
-#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
-#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
-#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
-#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
-#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
-#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
-#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
-#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
-#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
-#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
-#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
-#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
-#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
-#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
-#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
-#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
-#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
-#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
-#define AT91_MCI_OVRE (1 << 30) /* Overrun */
-#define AT91_MCI_UNRE (1 << 31) /* Underrun */
-
-#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
-#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
deleted file mode 100644
index 84c3866..0000000
--- a/include/asm-arm/arch-at91/at91_pio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
deleted file mode 100644
index 5026325..0000000
--- a/include/asm-arm/arch-at91/at91_pit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
-#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
-#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
-#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-
-#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
-#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-
-#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
-#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
-#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
deleted file mode 100644
index 2001e81..0000000
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
-#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
-#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
-#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
-#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
-#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
-#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
-#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
-#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
-
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
-#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
-#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-#define AT91_PMC_DIV (0xff << 0) /* Divider */
-#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
-#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
-#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
-#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
-#define AT91_PMC_USBDIV_1 (0 << 28)
-#define AT91_PMC_USBDIV_2 (1 << 28)
-#define AT91_PMC_USBDIV_4 (2 << 28)
-#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
-#define AT91_PMC_CSS_SLOW (0 << 0)
-#define AT91_PMC_CSS_MAIN (1 << 0)
-#define AT91_PMC_CSS_PLLA (2 << 0)
-#define AT91_PMC_CSS_PLLB (3 << 0)
-#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
-#define AT91_PMC_PRES_2 (1 << 2)
-#define AT91_PMC_PRES_4 (2 << 2)
-#define AT91_PMC_PRES_8 (3 << 2)
-#define AT91_PMC_PRES_16 (4 << 2)
-#define AT91_PMC_PRES_32 (5 << 2)
-#define AT91_PMC_PRES_64 (6 << 2)
-#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
-#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
-#define AT91RM9200_PMC_MDIV_2 (1 << 8)
-#define AT91RM9200_PMC_MDIV_3 (2 << 8)
-#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
-#define AT91SAM9_PMC_MDIV_2 (1 << 8)
-#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
-#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
-#define AT91_PMC_PDIV_1 (0 << 12)
-#define AT91_PMC_PDIV_2 (1 << 12)
-
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
-#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
-#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
-#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
-#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
deleted file mode 100644
index fb8d161..0000000
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
-#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
-#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
-#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
-#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
-#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
-#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
-#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
-#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
-#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
-#define AT91_RSTC_RSTTYP_USER (4 << 8)
-#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
-#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
-#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
-#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
-#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
deleted file mode 100644
index af9bd28..0000000
--- a/include/asm-arm/arch-at91/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
-#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
-#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
-#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
-#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
-#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
-#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
-#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
-#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
-#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
-#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
-#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
-
-#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
-#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
-
-#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
-#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
-#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
-#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
-#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
-
-#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
-#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
-#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
-#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
-#define AT91_RTC_DAY (7 << 21) /* Current Day */
-#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
-
-#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
-#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
-#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
-#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
-
-#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
-#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
-#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
-
-#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
-#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
-#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
-#define AT91_RTC_SECEV (1 << 2) /* Second Event */
-#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
-#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
-
-#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
-#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
-#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
-#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
-
-#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
-#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
-#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
-#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
-#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
deleted file mode 100644
index 39a3263..0000000
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
-#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
-#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
-#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
-#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
-
-#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
-#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
-
-#define AT91_RTT_VR 0x08 /* Real-time Value Register */
-#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
-
-#define AT91_RTT_SR 0x0c /* Real-time Status Register */
-#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
-#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
deleted file mode 100644
index 581fa41..0000000
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
-#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */
-#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
-#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
-#define AT91_SHDW_WKMODE0_NONE 0
-#define AT91_SHDW_WKMODE0_HIGH 1
-#define AT91_SHDW_WKMODE0_LOW 2
-#define AT91_SHDW_WKMODE0_ANYLEVEL 3
-#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
-#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
-#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
-#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
-#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
-#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
deleted file mode 100644
index f9b9a84..0000000
--- a/include/asm-arm/arch-at91/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR 0x00 /* Control Register */
-#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
-#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
-#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR 0x04 /* Mode Register */
-#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
-#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
-#define AT91_SPI_PS_FIXED (0 << 1)
-#define AT91_SPI_PS_VARIABLE (1 << 1)
-#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
-#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
-#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR 0x08 /* Receive Data Register */
-#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-
-#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
-#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR 0x10 /* Status Register */
-#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
-#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
-#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
-#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
-#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
-#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
-#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
-#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
-#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
-#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
-#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
-
-#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
-#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
-#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
-#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
-#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
-#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
-#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
-#define AT91_SPI_BITS_8 (0 << 4)
-#define AT91_SPI_BITS_9 (1 << 4)
-#define AT91_SPI_BITS_10 (2 << 4)
-#define AT91_SPI_BITS_11 (3 << 4)
-#define AT91_SPI_BITS_12 (4 << 4)
-#define AT91_SPI_BITS_13 (5 << 4)
-#define AT91_SPI_BITS_14 (6 << 4)
-#define AT91_SPI_BITS_15 (7 << 4)
-#define AT91_SPI_BITS_16 (8 << 4)
-#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
-#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
-#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
deleted file mode 100644
index 0ecc734..0000000
--- a/include/asm-arm/arch-at91/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR 0x00 /* Control Register */
-#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
-#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
-#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
-#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
-#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
-
-#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
-#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
-
-#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
-#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
-#define AT91_SSC_CKS_DIV (0 << 0)
-#define AT91_SSC_CKS_CLOCK (1 << 0)
-#define AT91_SSC_CKS_PIN (2 << 0)
-#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
-#define AT91_SSC_CKO_NONE (0 << 2)
-#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
-#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
-#define AT91_SSC_CKI_FALLING (0 << 5)
-#define AT91_SSC_CK_RISING (1 << 5)
-#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define AT91_SSC_CKG_NONE (0 << 6)
-#define AT91_SSC_CKG_RFLOW (1 << 6)
-#define AT91_SSC_CKG_RFHIGH (2 << 6)
-#define AT91_SSC_START (0xf << 8) /* Start Selection */
-#define AT91_SSC_START_CONTINUOUS (0 << 8)
-#define AT91_SSC_START_TX_RX (1 << 8)
-#define AT91_SSC_START_LOW_RF (2 << 8)
-#define AT91_SSC_START_HIGH_RF (3 << 8)
-#define AT91_SSC_START_FALLING_RF (4 << 8)
-#define AT91_SSC_START_RISING_RF (5 << 8)
-#define AT91_SSC_START_LEVEL_RF (6 << 8)
-#define AT91_SSC_START_EDGE_RF (7 << 8)
-#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
-#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
-#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
-
-#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
-#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
-#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
-#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
-#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
-#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
-#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
-#define AT91_SSC_FSOS_NONE (0 << 20)
-#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
-#define AT91_SSC_FSOS_POSITIVE (2 << 20)
-#define AT91_SSC_FSOS_LOW (3 << 20)
-#define AT91_SSC_FSOS_HIGH (4 << 20)
-#define AT91_SSC_FSOS_TOGGLE (5 << 20)
-#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
-#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
-#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
-
-#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
-#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
-#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
-#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
-#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
-#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR 0x40 /* Status Register */
-#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
-#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
-#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
-#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
-#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
-#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
-#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
-#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
-#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
-#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
-#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
-#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
-#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
-#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
-
-#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
-#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
deleted file mode 100644
index 30446e2..0000000
--- a/include/asm-arm/arch-at91/at91_st.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
-#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
-
-#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
-#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
-
-#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
-#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
-#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
-#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
-
-#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
-#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
-
-#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
-#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
-#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
-#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
-#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
-
-#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
-#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
-#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
-
-#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
-#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
-
-#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
-#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
deleted file mode 100644
index b85d3fa..0000000
--- a/include/asm-arm/arch-at91/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
-#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
-
-#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
-#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
-#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
-#define AT91_TC_TC0XC0S_NONE (1 << 0)
-#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
-#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
-#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
-#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
-#define AT91_TC_TC1XC1S_NONE (1 << 2)
-#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
-#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
-#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
-#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
-#define AT91_TC_TC2XC2S_NONE (1 << 4)
-#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
-#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
-
-
-#define AT91_TC_CCR 0x00 /* Channel Control Register */
-#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
-#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
-#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
-
-#define AT91_TC_CMR 0x04 /* Channel Mode Register */
-#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
-#define AT91_TC_TIMER_CLOCK1 (0 << 0)
-#define AT91_TC_TIMER_CLOCK2 (1 << 0)
-#define AT91_TC_TIMER_CLOCK3 (2 << 0)
-#define AT91_TC_TIMER_CLOCK4 (3 << 0)
-#define AT91_TC_TIMER_CLOCK5 (4 << 0)
-#define AT91_TC_XC0 (5 << 0)
-#define AT91_TC_XC1 (6 << 0)
-#define AT91_TC_XC2 (7 << 0)
-#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
-#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
-#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
-#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
-#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
-#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
-#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
-#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
-#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
-
-#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
-#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
-#define AT91_TC_EEVTEDG_NONE (0 << 8)
-#define AT91_TC_EEVTEDG_RISING (1 << 8)
-#define AT91_TC_EEVTEDG_FALLING (2 << 8)
-#define AT91_TC_EEVTEDG_BOTH (3 << 8)
-#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
-#define AT91_TC_EEVT_TIOB (0 << 10)
-#define AT91_TC_EEVT_XC0 (1 << 10)
-#define AT91_TC_EEVT_XC1 (2 << 10)
-#define AT91_TC_EEVT_XC2 (3 << 10)
-#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
-#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
-#define AT91_TC_WAVESEL_UP (0 << 13)
-#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
-#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
-#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
-#define AT91_TC_ACPA_NONE (0 << 16)
-#define AT91_TC_ACPA_SET (1 << 16)
-#define AT91_TC_ACPA_CLEAR (2 << 16)
-#define AT91_TC_ACPA_TOGGLE (3 << 16)
-#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
-#define AT91_TC_ACPC_NONE (0 << 18)
-#define AT91_TC_ACPC_SET (1 << 18)
-#define AT91_TC_ACPC_CLEAR (2 << 18)
-#define AT91_TC_ACPC_TOGGLE (3 << 18)
-#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
-#define AT91_TC_AEEVT_NONE (0 << 20)
-#define AT91_TC_AEEVT_SET (1 << 20)
-#define AT91_TC_AEEVT_CLEAR (2 << 20)
-#define AT91_TC_AEEVT_TOGGLE (3 << 20)
-#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
-#define AT91_TC_ASWTRG_NONE (0 << 22)
-#define AT91_TC_ASWTRG_SET (1 << 22)
-#define AT91_TC_ASWTRG_CLEAR (2 << 22)
-#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
-#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
-#define AT91_TC_BCPB_NONE (0 << 24)
-#define AT91_TC_BCPB_SET (1 << 24)
-#define AT91_TC_BCPB_CLEAR (2 << 24)
-#define AT91_TC_BCPB_TOGGLE (3 << 24)
-#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
-#define AT91_TC_BCPC_NONE (0 << 26)
-#define AT91_TC_BCPC_SET (1 << 26)
-#define AT91_TC_BCPC_CLEAR (2 << 26)
-#define AT91_TC_BCPC_TOGGLE (3 << 26)
-#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
-#define AT91_TC_BEEVT_NONE (0 << 28)
-#define AT91_TC_BEEVT_SET (1 << 28)
-#define AT91_TC_BEEVT_CLEAR (2 << 28)
-#define AT91_TC_BEEVT_TOGGLE (3 << 28)
-#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
-#define AT91_TC_BSWTRG_NONE (0 << 30)
-#define AT91_TC_BSWTRG_SET (1 << 30)
-#define AT91_TC_BSWTRG_CLEAR (2 << 30)
-#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
-
-#define AT91_TC_CV 0x10 /* Counter Value */
-#define AT91_TC_RA 0x14 /* Register A */
-#define AT91_TC_RB 0x18 /* Register B */
-#define AT91_TC_RC 0x1c /* Register C */
-
-#define AT91_TC_SR 0x20 /* Status Register */
-#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
-#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
-#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
-#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
-#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
-#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
-#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
-#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
-#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
-#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
-#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
-
-#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
deleted file mode 100644
index f9f2e3c..0000000
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define AT91_TWI_CR 0x00 /* Control Register */
-#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
-#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
-#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
-#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
-#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
-#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
-#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_TWI_MMR 0x04 /* Master Mode Register */
-#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
-#define AT91_TWI_IADRSZ_NO (0 << 8)
-#define AT91_TWI_IADRSZ_1 (1 << 8)
-#define AT91_TWI_IADRSZ_2 (2 << 8)
-#define AT91_TWI_IADRSZ_3 (3 << 8)
-#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
-#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
-
-#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
-#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
-
-#define AT91_TWI_IADR 0x0c /* Internal Address Register */
-
-#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
-#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
-#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
-#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
-
-#define AT91_TWI_SR 0x20 /* Status Register */
-#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
-#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
-#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
-#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
-#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
-#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
-#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
-#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
-#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
-#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
-#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
-#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
-
-#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
-#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
-#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
-
-#endif
-
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
deleted file mode 100644
index 1014e9b..0000000
--- a/include/asm-arm/arch-at91/at91_wdt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
-#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
-#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
-#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
-#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
-#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
-#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
-#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
-#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
-#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
-#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-
-#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
-#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
-#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
deleted file mode 100644
index 6f14d90..0000000
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS 0xfff78000
-#define AT91CAP9_BASE_TCB0 0xfff7c000
-#define AT91CAP9_BASE_TC0 0xfff7c000
-#define AT91CAP9_BASE_TC1 0xfff7c040
-#define AT91CAP9_BASE_TC2 0xfff7c080
-#define AT91CAP9_BASE_MCI0 0xfff80000
-#define AT91CAP9_BASE_MCI1 0xfff84000
-#define AT91CAP9_BASE_TWI 0xfff88000
-#define AT91CAP9_BASE_US0 0xfff8c000
-#define AT91CAP9_BASE_US1 0xfff90000
-#define AT91CAP9_BASE_US2 0xfff94000
-#define AT91CAP9_BASE_SSC0 0xfff98000
-#define AT91CAP9_BASE_SSC1 0xfff9c000
-#define AT91CAP9_BASE_AC97C 0xfffa0000
-#define AT91CAP9_BASE_SPI0 0xfffa4000
-#define AT91CAP9_BASE_SPI1 0xfffa8000
-#define AT91CAP9_BASE_CAN 0xfffac000
-#define AT91CAP9_BASE_PWMC 0xfffb8000
-#define AT91CAP9_BASE_EMAC 0xfffbc000
-#define AT91CAP9_BASE_ADC 0xfffc0000
-#define AT91CAP9_BASE_ISI 0xfffc4000
-#define AT91_BASE_SYS 0xffffe200
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
-#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91CAP9_BASE_US0
-#define AT91_USART1 AT91CAP9_BASE_US1
-#define AT91_USART2 AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
deleted file mode 100644
index efdb23a..0000000
--- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
-#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
-#define AT91_DDRSDRC_MODE_NORMAL 0
-#define AT91_DDRSDRC_MODE_NOP 1
-#define AT91_DDRSDRC_MODE_PRECHARGE 2
-#define AT91_DDRSDRC_MODE_LMR 3
-#define AT91_DDRSDRC_MODE_REFRESH 4
-#define AT91_DDRSDRC_MODE_EXT_LMR 5
-#define AT91_DDRSDRC_MODE_DEEP 6
-
-#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
-#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
-#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
-#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
-#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
-#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
-#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
-#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
-#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
-#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
-#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_DDRSDRC_NR_11 (0 << 2)
-#define AT91_DDRSDRC_NR_12 (1 << 2)
-#define AT91_DDRSDRC_NR_13 (2 << 2)
-#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
-#define AT91_DDRSDRC_CAS_2 (2 << 4)
-#define AT91_DDRSDRC_CAS_3 (3 << 4)
-#define AT91_DDRSDRC_CAS_25 (6 << 4)
-#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
-#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
-#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
-#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
-#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
-#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
-#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
-#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
-#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
-#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
-#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
-#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
-#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
-#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
-#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_DDRSDRC_LPCB_DISABLE 0
-#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
-#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
-#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
-#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
-#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-
-#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
-#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
-#define AT91_DDRSDRC_MD_SDR 0
-#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91_DDRSDRC_MD_DDR 2
-#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-
-#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
-#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
-#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
-#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
-#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
deleted file mode 100644
index ddbd487..0000000
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
-#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
-#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
-#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
deleted file mode 100644
index e8fc0b1..0000000
--- a/include/asm-arm/arch-at91/at91rm9200.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripheral */
-#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91RM9200_ID_US0 6 /* USART 0 */
-#define AT91RM9200_ID_US1 7 /* USART 1 */
-#define AT91RM9200_ID_US2 8 /* USART 2 */
-#define AT91RM9200_ID_US3 9 /* USART 3 */
-#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP 11 /* USB Device Port */
-#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
-#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
-#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
-#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
-#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
-#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
-#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
-#define AT91RM9200_ID_UHP 23 /* USB Host port */
-#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0 0xfffa0000
-#define AT91RM9200_BASE_TC0 0xfffa0000
-#define AT91RM9200_BASE_TC1 0xfffa0040
-#define AT91RM9200_BASE_TC2 0xfffa0080
-#define AT91RM9200_BASE_TCB1 0xfffa4000
-#define AT91RM9200_BASE_TC3 0xfffa4000
-#define AT91RM9200_BASE_TC4 0xfffa4040
-#define AT91RM9200_BASE_TC5 0xfffa4080
-#define AT91RM9200_BASE_UDP 0xfffb0000
-#define AT91RM9200_BASE_MCI 0xfffb4000
-#define AT91RM9200_BASE_TWI 0xfffb8000
-#define AT91RM9200_BASE_EMAC 0xfffbc000
-#define AT91RM9200_BASE_US0 0xfffc0000
-#define AT91RM9200_BASE_US1 0xfffc4000
-#define AT91RM9200_BASE_US2 0xfffc8000
-#define AT91RM9200_BASE_US3 0xfffcc000
-#define AT91RM9200_BASE_SSC0 0xfffd0000
-#define AT91RM9200_BASE_SSC1 0xfffd4000
-#define AT91RM9200_BASE_SSC2 0xfffd8000
-#define AT91RM9200_BASE_SPI 0xfffe0000
-#define AT91_BASE_SYS 0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
-#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
-#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
-
-#define AT91_USART0 AT91RM9200_BASE_US0
-#define AT91_USART1 AT91RM9200_BASE_US1
-#define AT91_USART2 AT91RM9200_BASE_US2
-#define AT91_USART3 AT91RM9200_BASE_US3
-
-#define AT91_MATRIX 0 /* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
deleted file mode 100644
index 0c417af..0000000
--- a/include/asm-arm/arch-at91/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define AT91_EMAC_CTL 0x00 /* Control Register */
-#define AT91_EMAC_LB (1 << 0) /* Loopback */
-#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */
-#define AT91_EMAC_RE (1 << 2) /* Receive Enable */
-#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */
-#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */
-#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */
-#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */
-#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */
-#define AT91_EMAC_BP (1 << 8) /* Back Pressure */
-
-#define AT91_EMAC_CFG 0x04 /* Configuration Register */
-#define AT91_EMAC_SPD (1 << 0) /* Speed */
-#define AT91_EMAC_FD (1 << 1) /* Full Duplex */
-#define AT91_EMAC_BR (1 << 2) /* Bit Rate */
-#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */
-#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */
-#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */
-#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */
-#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */
-#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */
-#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */
-#define AT91_EMAC_CLK_DIV8 (0 << 10)
-#define AT91_EMAC_CLK_DIV16 (1 << 10)
-#define AT91_EMAC_CLK_DIV32 (2 << 10)
-#define AT91_EMAC_CLK_DIV64 (3 << 10)
-#define AT91_EMAC_RTY (1 << 12) /* Retry Test */
-#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */
-
-#define AT91_EMAC_SR 0x08 /* Status Register */
-#define AT91_EMAC_SR_LINK (1 << 0) /* Link */
-#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */
-#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */
-
-#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */
-
-#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */
-#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */
-#define AT91_EMAC_NCRC (1 << 15) /* No CRC */
-
-#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */
-#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */
-#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */
-#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */
-#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */
-#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */
-#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */
-
-#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */
-
-#define AT91_EMAC_RSR 0x20 /* Receive Status Register */
-#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */
-#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */
-#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */
-
-#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */
-#define AT91_EMAC_DONE (1 << 0) /* Management Done */
-#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */
-#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */
-#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */
-#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */
-#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */
-#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */
-#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */
-#define AT91_EMAC_LINK (1 << 9) /* Link */
-#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */
-#define AT91_EMAC_ABT (1 << 11) /* Abort */
-
-#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */
-#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */
-#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */
-
-#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */
-#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */
-#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */
-#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */
-#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */
-#define AT91_EMAC_RW_W (1 << 28)
-#define AT91_EMAC_RW_R (2 << 28)
-#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */
-#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */
-#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */
-#define AT91_EMAC_OK 0x4c /* Frames Received OK */
-#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */
-#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */
-#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL 0x5c /* Late Collision */
-#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */
-#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */
-#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */
-#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */
-#define AT91_EMAC_ROV 0x70 /* Receive Overrun */
-#define AT91_EMAC_CDE 0x74 /* Code Error */
-#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */
-#define AT91_EMAC_RJB 0x7c /* Receive Jabber */
-#define AT91_EMAC_USF 0x80 /* Undersize Frame */
-#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
deleted file mode 100644
index 24d0129..0000000
--- a/include/asm-arm/arch-at91/at91rm9200_mc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
-#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
-
-#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
-#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
-#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
-#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
-#define AT91_MC_ABTSZ_BYTE (0 << 8)
-#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
-#define AT91_MC_ABTSZ_WORD (2 << 8)
-#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
-#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
-#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
-#define AT91_MC_ABTTYP_FETCH (2 << 10)
-#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
-#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
-#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
-#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
-#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
-#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
-#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
-#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
-
-#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
-#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
-#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
-#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
-#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
-#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
-#define AT91_EBI_CS0A_SMC (0 << 0)
-#define AT91_EBI_CS0A_BFC (1 << 0)
-#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_EBI_CS1A_SMC (0 << 1)
-#define AT91_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
-#define AT91_EBI_CS3A_SMC (0 << 3)
-#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
-#define AT91_EBI_CS4A_SMC (0 << 4)
-#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
-#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
-#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
-#define AT91_SMC_NWS_(x) ((x) << 0)
-#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
-#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
-#define AT91_SMC_TDF_(x) ((x) << 8)
-#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
-#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
-#define AT91_SMC_DBW_16 (1 << 13)
-#define AT91_SMC_DBW_8 (2 << 13)
-#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
-#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
-#define AT91_SMC_ACSS_STD (0 << 16)
-#define AT91_SMC_ACSS_1 (1 << 16)
-#define AT91_SMC_ACSS_2 (2 << 16)
-#define AT91_SMC_ACSS_3 (3 << 16)
-#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
-#define AT91_SMC_RWSETUP_(x) ((x) << 24)
-#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
-#define AT91_SMC_RWHOLD_(x) ((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91_SDRAMC_MODE_NOP (1 << 0)
-#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91_SDRAMC_MODE_LMR (3 << 0)
-#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 4)
-#define AT91_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
-#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
-#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
-#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
-#define AT91_BFC_BFCOM_DISABLED (0 << 0)
-#define AT91_BFC_BFCOM_ASYNC (1 << 0)
-#define AT91_BFC_BFCOM_BURST (2 << 0)
-#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
-#define AT91_BFC_BFCC_MCK (1 << 2)
-#define AT91_BFC_BFCC_DIV2 (2 << 2)
-#define AT91_BFC_BFCC_DIV4 (3 << 2)
-#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
-#define AT91_BFC_PAGES (7 << 8) /* Page Size */
-#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
-#define AT91_BFC_PAGES_16 (1 << 8)
-#define AT91_BFC_PAGES_32 (2 << 8)
-#define AT91_BFC_PAGES_64 (3 << 8)
-#define AT91_BFC_PAGES_128 (4 << 8)
-#define AT91_BFC_PAGES_256 (5 << 8)
-#define AT91_BFC_PAGES_512 (6 << 8)
-#define AT91_BFC_PAGES_1024 (7 << 8)
-#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
-#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
-#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
-#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
-#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
deleted file mode 100644
index 889872a..0000000
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0 6 /* USART 0 */
-#define AT91SAM9260_ID_US1 7 /* USART 1 */
-#define AT91SAM9260_ID_US2 8 /* USART 2 */
-#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP 20 /* USB Host port */
-#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
-#define AT91SAM9260_ID_US3 23 /* USART 3 */
-#define AT91SAM9260_ID_US4 24 /* USART 4 */
-#define AT91SAM9260_ID_US5 25 /* USART 5 */
-#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0 0xfffa0000
-#define AT91SAM9260_BASE_TC0 0xfffa0000
-#define AT91SAM9260_BASE_TC1 0xfffa0040
-#define AT91SAM9260_BASE_TC2 0xfffa0080
-#define AT91SAM9260_BASE_UDP 0xfffa4000
-#define AT91SAM9260_BASE_MCI 0xfffa8000
-#define AT91SAM9260_BASE_TWI 0xfffac000
-#define AT91SAM9260_BASE_US0 0xfffb0000
-#define AT91SAM9260_BASE_US1 0xfffb4000
-#define AT91SAM9260_BASE_US2 0xfffb8000
-#define AT91SAM9260_BASE_SSC 0xfffbc000
-#define AT91SAM9260_BASE_ISI 0xfffc0000
-#define AT91SAM9260_BASE_EMAC 0xfffc4000
-#define AT91SAM9260_BASE_SPI0 0xfffc8000
-#define AT91SAM9260_BASE_SPI1 0xfffcc000
-#define AT91SAM9260_BASE_US3 0xfffd0000
-#define AT91SAM9260_BASE_US4 0xfffd4000
-#define AT91SAM9260_BASE_US5 0xfffd8000
-#define AT91SAM9260_BASE_TCB1 0xfffdc000
-#define AT91SAM9260_BASE_TC3 0xfffdc000
-#define AT91SAM9260_BASE_TC4 0xfffdc040
-#define AT91SAM9260_BASE_TC5 0xfffdc080
-#define AT91SAM9260_BASE_ADC 0xfffe0000
-#define AT91_BASE_SYS 0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9260_BASE_US0
-#define AT91_USART1 AT91SAM9260_BASE_US1
-#define AT91_USART2 AT91SAM9260_BASE_US2
-#define AT91_USART3 AT91SAM9260_BASE_US3
-#define AT91_USART4 AT91SAM9260_BASE_US4
-#define AT91_USART5 AT91SAM9260_BASE_US5
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
deleted file mode 100644
index a8e9fec..0000000
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
deleted file mode 100644
index c7c4778..0000000
--- a/include/asm-arm/arch-at91/at91sam9261.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0 6 /* USART 0 */
-#define AT91SAM9261_ID_US1 7 /* USART 1 */
-#define AT91SAM9261_ID_US2 8 /* USART 2 */
-#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP 20 /* USB Host port */
-#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
-#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0 0xfffa0000
-#define AT91SAM9261_BASE_TC0 0xfffa0000
-#define AT91SAM9261_BASE_TC1 0xfffa0040
-#define AT91SAM9261_BASE_TC2 0xfffa0080
-#define AT91SAM9261_BASE_UDP 0xfffa4000
-#define AT91SAM9261_BASE_MCI 0xfffa8000
-#define AT91SAM9261_BASE_TWI 0xfffac000
-#define AT91SAM9261_BASE_US0 0xfffb0000
-#define AT91SAM9261_BASE_US1 0xfffb4000
-#define AT91SAM9261_BASE_US2 0xfffb8000
-#define AT91SAM9261_BASE_SSC0 0xfffbc000
-#define AT91SAM9261_BASE_SSC1 0xfffc0000
-#define AT91SAM9261_BASE_SSC2 0xfffc4000
-#define AT91SAM9261_BASE_SPI0 0xfffc8000
-#define AT91SAM9261_BASE_SPI1 0xfffcc000
-#define AT91_BASE_SYS 0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9261_BASE_US0
-#define AT91_USART1 AT91SAM9261_BASE_US1
-#define AT91_USART2 AT91SAM9261_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
-#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
deleted file mode 100644
index 6f07242..0000000
--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
-#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
deleted file mode 100644
index 018a647..0000000
--- a/include/asm-arm/arch-at91/at91sam9263.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0 7 /* USART 0 */
-#define AT91SAM9263_ID_US1 8 /* USART 1 */
-#define AT91SAM9263_ID_US2 9 /* USART 2 */
-#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN 12 /* CAN */
-#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
-#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
-#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
-#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
-#define AT91SAM9263_ID_UHP 29 /* USB Host port */
-#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP 0xfff78000
-#define AT91SAM9263_BASE_TCB0 0xfff7c000
-#define AT91SAM9263_BASE_TC0 0xfff7c000
-#define AT91SAM9263_BASE_TC1 0xfff7c040
-#define AT91SAM9263_BASE_TC2 0xfff7c080
-#define AT91SAM9263_BASE_MCI0 0xfff80000
-#define AT91SAM9263_BASE_MCI1 0xfff84000
-#define AT91SAM9263_BASE_TWI 0xfff88000
-#define AT91SAM9263_BASE_US0 0xfff8c000
-#define AT91SAM9263_BASE_US1 0xfff90000
-#define AT91SAM9263_BASE_US2 0xfff94000
-#define AT91SAM9263_BASE_SSC0 0xfff98000
-#define AT91SAM9263_BASE_SSC1 0xfff9c000
-#define AT91SAM9263_BASE_AC97C 0xfffa0000
-#define AT91SAM9263_BASE_SPI0 0xfffa4000
-#define AT91SAM9263_BASE_SPI1 0xfffa8000
-#define AT91SAM9263_BASE_CAN 0xfffac000
-#define AT91SAM9263_BASE_PWMC 0xfffb8000
-#define AT91SAM9263_BASE_EMAC 0xfffbc000
-#define AT91SAM9263_BASE_ISI 0xfffc4000
-#define AT91SAM9263_BASE_2DGE 0xfffc8000
-#define AT91_BASE_SYS 0xffffe000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
-#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9263_BASE_US0
-#define AT91_USART1 AT91SAM9263_BASE_US1
-#define AT91_USART2 AT91SAM9263_BASE_US2
-
-#define AT91_SMC AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
-#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
-#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
deleted file mode 100644
index 72f6e66..0000000
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263_matrix.h
- *
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
-#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h
deleted file mode 100644
index d3b8b3d..0000000
--- a/include/asm-arm/arch-at91/at91sam9_sdramc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_sdramc.h
- *
- * SDRAM Controllers (SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SDRAMC_H
-#define AT91SAM9_SDRAMC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL 0
-#define AT91_SDRAMC_MODE_NOP 1
-#define AT91_SDRAMC_MODE_PRECHARGE 2
-#define AT91_SDRAMC_MODE_LMR 3
-#define AT91_SDRAMC_MODE_REFRESH 4
-#define AT91_SDRAMC_MODE_EXT_LMR 5
-#define AT91_SDRAMC_MODE_DEEP 6
-
-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_1 (1 << 5)
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_CAS_3 (3 << 5)
-#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 7)
-#define AT91_SDRAMC_DBW_16 (1 << 7)
-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
-#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_SDRAMC_LPCB_DISABLE 0
-#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
-#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-
-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
-#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
-#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-#define AT91_SDRAMC_MD_SDRAM 0
-#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h
deleted file mode 100644
index 9e49eed..0000000
--- a/include/asm-arm/arch-at91/at91sam9_smc.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_smc.h
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-
-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-
-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-#define AT91_SMC_TDF_(x) ((x) << 16)
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-#define AT91_SMC_PS (3 << 28) /* Page Size */
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
-#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
deleted file mode 100644
index 622e56f..0000000
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-#define AT91_BASE_SYS 0xffffc000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
deleted file mode 100644
index 8422417..0000000
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9rl_matrix.h
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91x40.h b/include/asm-arm/arch-at91/at91x40.h
deleted file mode 100644
index 612203e..0000000
--- a/include/asm-arm/arch-at91/at91x40.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- * IRQ list.
- */
-#define AT91_ID_FIQ 0 /* FIQ */
-#define AT91_ID_SYS 1 /* System Peripheral */
-#define AT91X40_ID_USART0 2 /* USART port 0 */
-#define AT91X40_ID_USART1 3 /* USART port 1 */
-#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
-#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/
-#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/
-#define AT91X40_ID_WD 7 /* Watchdog? */
-#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */
-#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */
-#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BASE_SYS 0xffc00000
-
-#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */
-#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */
-#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */
-#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */
-#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */
-#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
-#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
-#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
-#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
-
-#endif /* AT91X40_H */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
deleted file mode 100644
index 48bbd85..0000000
--- a/include/asm-arm/arch-at91/board.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * include/asm-arm/arch-at91/board.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers. For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
-struct at91_udc_data {
- u8 vbus_pin; /* high == host powering us */
- u8 pullup_pin; /* active == D+ pulled up */
- u8 pullup_active_low; /* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
- u8 irq_pin; /* I/O IRQ */
- u8 det_pin; /* Card detect */
- u8 vcc_pin; /* power switching */
- u8 rst_pin; /* card reset */
- u8 chipselect; /* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
- u8 det_pin; /* card detect IRQ */
- unsigned slot_b:1; /* uses Slot B */
- unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
- u8 wp_pin; /* (SD) writeprotect detect */
- u8 vcc_pin; /* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
- u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
-#define eth_platform_data at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
- u8 ports; /* number of ports on root hub */
- u8 vbus_pin[]; /* port power-control pin */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct atmel_nand_data {
- u8 enable_pin; /* chip enable */
- u8 det_pin; /* card detect */
- u8 rdy_pin; /* ready/busy */
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS 0x01
-#define ATMEL_UART_RTS 0x02
-#define ATMEL_UART_DSR 0x04
-#define ATMEL_UART_DTR 0x08
-#define ATMEL_UART_DCD 0x10
-#define ATMEL_UART_RI 0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
- * platform devices. Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK 0x01
-#define ATMEL_SSC_TF 0x02
-#define ATMEL_SSC_TD 0x04
-#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK 0x10
-#define ATMEL_SSC_RF 0x20
-#define ATMEL_SSC_RD 0x40
-#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-struct atmel_ac97_data {
- u8 reset_pin; /* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
deleted file mode 100644
index f24b55c..0000000
--- a/include/asm-arm/arch-at91/cpu.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * include/asm-arm/arch-at91/cpu.h
- *
- * Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200 0x09290780
-#define ARCH_ID_AT91SAM9260 0x019803a0
-#define ARCH_ID_AT91SAM9261 0x019703a0
-#define ARCH_ID_AT91SAM9263 0x019607a0
-#define ARCH_ID_AT91SAM9G20 0x019905a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-#define ARCH_ID_AT91CAP9 0x039A03A0
-
-#define ARCH_ID_AT91SAM9XE128 0x329973a0
-#define ARCH_ID_AT91SAM9XE256 0x329a93a0
-#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
-#define ARCH_ID_AT91M40800 0x14080044
-#define ARCH_ID_AT91R40807 0x44080746
-#define ARCH_ID_AT91M40807 0x14080745
-#define ARCH_ID_AT91R40008 0x44000840
-
-static inline unsigned long at91_cpu_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#define ARCH_FAMILY_AT91X92 0x09200000
-#define ARCH_FAMILY_AT91SAM9 0x01900000
-#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-
-static inline unsigned long at91_arch_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
-#else
-#define cpu_is_at91sam9xe() (0)
-#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
-#else
-#define cpu_is_at91sam9g20() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
-#else
-#define cpu_is_at91sam9263() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-#else
-#define cpu_is_at91sam9rl() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
-#else
-#define cpu_is_at91cap9() (0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000() (0)
-
-#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
deleted file mode 100644
index ff28696..0000000
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/debug-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
- ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
- beq 1001b
- .endm
-
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
deleted file mode 100644
index 7745654..0000000
--- a/include/asm-arm/arch-at91/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91/dma.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
deleted file mode 100644
index cbaf605..0000000
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/entry-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_aic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
- .endm
-
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
deleted file mode 100644
index 0a241e2..0000000
--- a/include/asm-arm/arch-at91/gpio.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * include/asm-arm/arch-at91/gpio.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS 5
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-
-#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
-#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
-#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
-#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
-#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
-#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
-#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
-#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
-#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
-#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
-#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
-#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
-#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
-#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
-#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
-#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
-#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
-#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
-#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
-#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
-#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
-#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
-#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
-#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
-#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
-#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
-#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
-#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
-#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
-#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
-#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
-#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-/*-------------------------------------------------------------------------*/
-
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and the
- * gpio request/free calls should probably be implemented.
- */
-
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- at91_set_gpio_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
deleted file mode 100644
index 016a3a3..0000000
--- a/include/asm-arm/arch-at91/hardware.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <asm/arch/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <asm/arch/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <asm/arch/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000. (544Kb)
- */
-#define AT91_IO_PHYS_BASE 0xFFF78000
-#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE
-#endif
-
-#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX SZ_1M
-#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0 0x10000000
-#define AT91_CHIPSELECT_1 0x20000000
-#define AT91_CHIPSELECT_2 0x30000000
-#define AT91_CHIPSELECT_3 0x40000000
-#define AT91_CHIPSELECT_4 0x50000000
-#define AT91_CHIPSELECT_5 0x60000000
-#define AT91_CHIPSELECT_6 0x70000000
-#define AT91_CHIPSELECT_7 0x80000000
-
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
-#endif
-
-/* Clocks */
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
deleted file mode 100644
index f8beaa2..0000000
--- a/include/asm-arm/arch-at91/io.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/io.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- __raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
deleted file mode 100644
index 70b1216..0000000
--- a/include/asm-arm/arch-at91/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/irqs.h
- *
- * Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/io.h>
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- * (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
deleted file mode 100644
index 904fbd6..0000000
--- a/include/asm-arm/arch-at91/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/memory.h
- *
- * Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-#define PHYS_OFFSET (AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
deleted file mode 100644
index c5e3d03..0000000
--- a/include/asm-arm/arch-at91/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Unlike disabling the processor clock via the PMC (above)
- * this allows the processor to be woken via JTAG.
- */
- cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
- /* call the CPU-specific reset function */
- if (at91_arch_reset)
- (at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
deleted file mode 100644
index 67c86a8..0000000
--- a/include/asm-arm/arch-at91/timex.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91/timex.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/arch/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK 90000000
-#else
-#define AT91SAM9_MASTER_CLOCK 99300000
-#endif
-
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK 99300000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK 90000000
-#else
-#define AT91SAM9_MASTER_CLOCK 99959500
-#endif
-
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK 100000000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
-
-#define AT91SAM9_MASTER_CLOCK 132096000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK 100000000
-#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK 40000000
-#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
deleted file mode 100644
index f5636a8..0000000
--- a/include/asm-arm/arch-at91/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-at91/uncompress.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <linux/atmel_serial.h>
-
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
-
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
- barrier();
- __raw_writel(c, sys + ATMEL_US_THR);
-#endif
-}
-
-static inline void flush(void)
-{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
-
- /* wait for transmission to complete */
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
- barrier();
-#endif
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
deleted file mode 100644
index bb05e70..0000000
--- a/include/asm-arm/arch-at91/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91/vmalloc.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
deleted file mode 100644
index 9a2b67d..0000000
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-cl7500/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mov \rx, #0xe0000000
- orr \rx, \rx, #0x00010000
- orr \rx, \rx, #0x00000be0
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
deleted file mode 100644
index 591ed25..0000000
--- a/include/asm-arm/arch-cl7500/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
-#define DMA_S0 0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
deleted file mode 100644
index 5bd5555..0000000
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/arch/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #ioc_base_high @ point at IOC
- .if ioc_base_low
- orr \base, \base, #ioc_base_low
- .endif
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h
deleted file mode 100644
index 1adfd18..0000000
--- a/include/asm-arm/arch-cl7500/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-
-#define IO_START 0x03000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE IOMEM(0xe0000000)
-
-#define ISA_START 0x0c000000 /* ISA */
-#define ISA_SIZE 0x00010000
-#define ISA_BASE 0xe1000000
-
-#define FLASH_START 0x01000000 /* XXX */
-#define FLASH_SIZE 0x01000000
-#define FLASH_BASE 0xe2000000
-
-#define LED_START 0x0302B000
-#define LED_SIZE 0x00001000
-#define LED_BASE 0xe3000000
-#define LED_ADDRESS (LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START 0x02000000 /* VRAM */
-#define SCREEN_END 0xdfc00000
-#define SCREEN_BASE 0xdf800000
-
-#define VIDC_BASE (void __iomem *)0xe0400000
-#define IOMD_BASE IOMEM(0xe0200000)
-#define IOC_BASE IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE IOMEM(0xe002a000)
-#define PCIO_BASE IOMEM(0xe0010000)
-
-#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO 0x80400000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
deleted file mode 100644
index 80f9b19..0000000
--- a/include/asm-arm/arch-cl7500/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/io.h
- * from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data. We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o) \
- ({ \
- unsigned int v, r = (b); \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2]" \
- : "=r" (v) \
- : "r" (r), "Ir" (o)); \
- v; \
- })
-
-#define __arch_base_getl(b,o) \
- ({ \
- unsigned int v, r = (b); \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2]" \
- : "=r" (v) \
- : "r" (r), "Ir" (o)); \
- v; \
- })
-
-#define __arch_base_putb(v,b,o) \
- ({ \
- unsigned int r = (b); \
- __asm__ __volatile__( \
- "strb %0, [%1, %2]" \
- : \
- : "r" (v), "r" (r), "Ir" (o)); \
- })
-
-#define __arch_base_putl(v,b,o) \
- ({ \
- unsigned int r = (b); \
- __asm__ __volatile__( \
- "str %0, [%1, %2]" \
- : \
- : "r" (v), "r" (r), "Ir" (o)); \
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO. Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "strb %1, [%0, %2, lsl #2] @ outb"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outw"
- : "=&r" (temp)
- : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outl"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "tst %2, #0x80000000\n\t" \
- "mov %0, %4\n\t" \
- "addeq %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline unsigned int __ioaddr (unsigned int port) \
-{ \
- if (__PORT_PCIO(port)) \
- return (unsigned int)(PCIO_BASE + (port << 2)); \
- else \
- return (unsigned int)(IO_BASE + (port << 2)); \
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result & 0xffff; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __ioaddrc(port) \
- (__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port) __ioaddr((port))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x) (x)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h
deleted file mode 100644
index 4b28633..0000000
--- a/include/asm-arm/arch-cl7500/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-cl7500/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- * 10-10-1996 RMK Brought up to date with arch-sa110eval
- * 22-08-1998 RMK Restructured IRQ routines
- * 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code
- */
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
- if (irq == IRQ_ISA) {
- int isabits = *((volatile unsigned int *)0xe002b700);
- if (isabits == 0) {
- printk("Spurious ISA IRQ!\n");
- return irq;
- }
- irq = IRQ_ISA_BASE;
- while (!(isabits & 1)) {
- irq++;
- isabits >>= 1;
- }
- }
-
- return irq;
-}
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h
deleted file mode 100644
index f20996e..0000000
--- a/include/asm-arm/arch-cl7500/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2 0
-#define IRQ_INT1 2
-#define IRQ_VSYNCPULSE 3
-#define IRQ_POWERON 4
-#define IRQ_TIMER0 5
-#define IRQ_TIMER1 6
-#define IRQ_FORCE 7
-#define IRQ_INT8 8
-#define IRQ_ISA 9
-#define IRQ_INT6 10
-#define IRQ_INT5 11
-#define IRQ_INT4 12
-#define IRQ_INT3 13
-#define IRQ_KEYBOARDTX 14
-#define IRQ_KEYBOARDRX 15
-
-#define IRQ_DMA0 16
-#define IRQ_DMA1 17
-#define IRQ_DMA2 18
-#define IRQ_DMA3 19
-#define IRQ_DMAS0 20
-#define IRQ_DMAS1 21
-
-#define IRQ_IOP0 24
-#define IRQ_IOP1 25
-#define IRQ_IOP2 26
-#define IRQ_IOP3 27
-#define IRQ_IOP4 28
-#define IRQ_IOP5 29
-#define IRQ_IOP6 30
-#define IRQ_IOP7 31
-
-#define IRQ_MOUSERX 40
-#define IRQ_MOUSETX 41
-#define IRQ_ADC 42
-#define IRQ_EVENT1 43
-#define IRQ_EVENT2 44
-
-#define IRQ_ISA_BASE 48
-#define IRQ_ISA_3 48
-#define IRQ_ISA_4 49
-#define IRQ_ISA_5 50
-#define IRQ_ISA_7 51
-#define IRQ_ISA_9 52
-#define IRQ_ISA_10 53
-#define IRQ_ISA_11 54
-#define IRQ_ISA_14 55
-
-#define FIQ_INT9 0
-#define FIQ_INT5 1
-#define FIQ_INT6 4
-#define FIQ_INT8 6
-#define FIQ_FORCE 7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
-
-#define IRQ_TIMER IRQ_TIMER0
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
deleted file mode 100644
index 3178140..0000000
--- a/include/asm-arm/arch-cl7500/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 11-Jan-1998 RMK Uninlined to reduce hits on cache
- * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x00000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h
deleted file mode 100644
index a9505d6..0000000
--- a/include/asm-arm/arch-cl7500/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
- iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode) \
- do { \
- iomd_writeb(0, IOMD_ROMCR0); \
- cpu_reset(0); \
- } while (0)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h
deleted file mode 100644
index 8a4175f..0000000
--- a/include/asm-arm/arch-cl7500/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE 2000000
-
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h
deleted file mode 100644
index c437e0c..0000000
--- a/include/asm-arm/arch-cl7500/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
- while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
- barrier();
-
- *((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
- int baud = 3686400 / (9600 * 32);
-
- *((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
- *((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
- *((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
- *((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
- *((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h
deleted file mode 100644
index ba8d7a8..0000000
--- a/include/asm-arm/arch-cl7500/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/vmalloc.h
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S
deleted file mode 100644
index bc0a576..0000000
--- a/include/asm-arm/arch-clps711x/debug-macro.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/arch-clps711x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/clps7111.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #CLPS7111_PHYS_BASE
- movne \rx, #CLPS7111_VIRT_BASE
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
- add \rx, \rx, #0x0000 @ UART1
-#else
- add \rx, \rx, #0x1000 @ UART2
-#endif
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0480] @ UARTDR
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
- tst \rd, #1 << 11 @ UBUSYx
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
- tst \rx, #0x1000 @ UART2 does not have CTS here
- bne 1002f
-1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
- tst \rd, #1 << 8 @ CTS
- bne 1001b
-1002:
- .endm
-
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
deleted file mode 100644
index 6109979..0000000
--- a/include/asm-arm/arch-clps711x/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
deleted file mode 100644
index 3554887..0000000
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-clps711x/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
- .macro get_irqnr_and_base, irqnr, stat, base, mask
- mov \base, #CLPS7111_BASE
- ldr \stat, [\base, #INTSR1]
- ldr \mask, [\base, #INTMR1]
- mov \irqnr, #4
- mov \mask, \mask, lsl #16
- and \stat, \stat, \mask, lsr #16
- movs \stat, \stat, lsr #4
- bne 1001f
-
- add \base, \base, #INTSR2 - INTSR1
- ldr \stat, [\base, #INTSR1]
- ldr \mask, [\base, #INTMR1]
- mov \irqnr, #16
- mov \mask, \mask, lsl #16
- and \stat, \stat, \mask, lsr #16
-
-1001: tst \stat, #255
- addeq \irqnr, \irqnr, #8
- moveq \stat, \stat, lsr #8
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
-
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
deleted file mode 100644
index 0fdbe72..0000000
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/hardware.h
- *
- * This file contains the hardware definitions of the Prospector P720T.
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE 0xff000000
-#define CLPS7111_BASE CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors. CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE (0x00000000)
-#define CS1_PHYS_BASE (0x10000000)
-#define CS2_PHYS_BASE (0x20000000)
-#define CS3_PHYS_BASE (0x30000000)
-#define CS4_PHYS_BASE (0x40000000)
-#define CS5_PHYS_BASE (0x50000000)
-#define CS6_PHYS_BASE (0x60000000)
-#define CS7_PHYS_BASE (0x70000000)
-#else
-#define CS0_PHYS_BASE (0x70000000)
-#define CS1_PHYS_BASE (0x60000000)
-#define CS2_PHYS_BASE (0x50000000)
-#define CS3_PHYS_BASE (0x40000000)
-#define CS4_PHYS_BASE (0x30000000)
-#define CS5_PHYS_BASE (0x20000000)
-#define CS6_PHYS_BASE (0x10000000)
-#define CS7_PHYS_BASE (0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE
-#define EP7211_BASE CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE
-#define EP7212_BASE CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE 0xfe000000
-#define SYSPLD_BASE SYSPLD_VIRT_BASE
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE IO_BASE
-
-#endif
-
-
-#if defined (CONFIG_ARCH_AUTCPU12)
-
-#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
-#define CS89712_BASE CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* dynamic ioremap() areas */
-#define FLASH_START 0x00000000
-#define FLASH_SIZE 0x800000
-#define FLASH_WIDTH 4
-
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0xc000
-#define SRAM_WIDTH 4
-
-#define BOOTROM_START 0x70000000
-#define BOOTROM_SIZE 0x80
-#define BOOTROM_WIDTH 4
-
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START 0x80000000
-#define REGISTER_SIZE 0x4000
-#define REGISTER_BASE 0xff000000
-
-#define ETHER_START 0x20000000
-#define ETHER_SIZE 0x1000
-#define ETHER_BASE 0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3)
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
-#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
-
-#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */
-#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN (1<<1)
-#define EDB_PD2_LCDEN (1<<2)
-#define EDB_PD3_LCDBL (1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE
-#define CEIVA_BASE CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
-#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
-
-#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */
-#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */
-
-#define CEIVA_FLASH_SIZE 0x100000
-#define CEIVA_FLASH_WIDTH 2
-
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0xc000
-#define SRAM_WIDTH 4
-
-#define BOOTROM_START 0x70000000
-#define BOOTROM_SIZE 0x80
-#define BOOTROM_WIDTH 4
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355 (0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST (1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN (1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL (1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN (1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN (1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
deleted file mode 100644
index 2b84dac..0000000
--- a/include/asm-arm/arch-clps711x/io.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-/*
- * We don't support ins[lb]/outs[lb]. Make them fault.
- */
-#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h
deleted file mode 100644
index 76025dc..0000000
--- a/include/asm-arm/arch-clps711x/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/irqs.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT 4
-#define IRQ_EINT1 5
-#define IRQ_EINT2 6
-#define IRQ_EINT3 7
-#define IRQ_TC1OI 8
-#define IRQ_TC2OI 9
-#define IRQ_RTCMI 10
-#define IRQ_TINT 11
-#define IRQ_UTXINT1 12
-#define IRQ_URXINT1 13
-#define IRQ_UMSINT 14
-#define IRQ_SSEOTI 15
-
-#define INT1_IRQS (0x0000fff0)
-#define INT1_ACK_IRQS (0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT (16+0) /* bit 0 */
-#define IRQ_SS2RX (16+1) /* bit 1 */
-#define IRQ_SS2TX (16+2) /* bit 2 */
-#define IRQ_UTXINT2 (16+12) /* bit 12 */
-#define IRQ_URXINT2 (16+13) /* bit 13 */
-
-#define INT2_IRQS (0x30070000)
-#define INT2_ACK_IRQS (0x00010000)
-
-#define NR_IRQS 30
-
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
deleted file mode 100644
index 42768cc..0000000
--- a/include/asm-arm/arch-clps711x/memory.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#else
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks. In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory. In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1). However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation. Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
- *
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS 24
-
-#endif
-
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h
deleted file mode 100644
index 960578a..0000000
--- a/include/asm-arm/arch-clps711x/syspld.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/syspld.h
- *
- * System Control PLD register definitions.
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE (0x10000000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off) (off)
-#endif
-
-#define PLD_INT SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ (1 << 5)
-#define PLD_INT_UCB_IRQ (1 << 1)
-#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */
-
-#define PLD_PWR SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT (1 << 5)
-#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */
-#define PLD_S3_ON (1 << 2) /* LCD backlight enable */
-#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */
-#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */
-
-#define PLD_KBD SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE (1 << 1)
-#define PLD_KBD_EN (1 << 0)
-
-#define PLD_SPI SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN (1 << 0)
-
-#define PLD_IO SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */
-#define PLD_IO_USER (1 << 5) /* user defined switch */
-#define PLD_IO_LED3 (1 << 4)
-#define PLD_IO_LED2 (1 << 3)
-#define PLD_IO_LED1 (1 << 2)
-#define PLD_IO_LED0 (1 << 1)
-#define PLD_IO_LEDEN (1 << 0)
-
-#define PLD_IRDA SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN (1 << 0)
-
-#define PLD_COM2 SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN (1 << 0)
-
-#define PLD_COM1 SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN (1 << 0)
-
-#define PLD_AUD SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1 (1 << 6)
-#define PLD_AUD_DIV0 (1 << 5)
-#define PLD_AUD_CLK_SEL1 (1 << 4)
-#define PLD_AUD_CLK_SEL0 (1 << 3)
-#define PLD_AUD_MIC_PWR (1 << 2)
-#define PLD_AUD_MIC_GAIN (1 << 1)
-#define PLD_AUD_CODEC_EN (1 << 0)
-
-#define PLD_CF SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP (1 << 5)
-#define PLD_CF1_SLEEP (1 << 4)
-#define PLD_CF2_nPDREQ (1 << 3)
-#define PLD_CF1_nPDREQ (1 << 2)
-#define PLD_CF2_nIRQ (1 << 1)
-#define PLD_CF1_nIRQ (1 << 0)
-
-#define PLD_SDC SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN (1 << 2)
-#define PLD_SDC_WP (1 << 1)
-#define PLD_SDC_CD (1 << 0)
-
-#define PLD_FPGA SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3 (1 << 4)
-#define PLD_CODEC_IRQ2 (1 << 3)
-#define PLD_CODEC_IRQ1 (1 << 2)
-#define PLD_CODEC_EN (1 << 0)
-
-#define PLD_BRITE SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP (1 << 1)
-#define PLD_BRITE_DN (1 << 0)
-
-#define PLD_LCDEN SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN (1 << 0)
-
-#define PLD_ID SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ (1 << 1)
-#define PLD_TCH_EN (1 << 0)
-
-#define PLD_GPIO SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2 (1 << 2)
-#define PLD_GPIO1 (1 << 1)
-#define PLD_GPIO0 (1 << 0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
deleted file mode 100644
index 1f56177..0000000
--- a/include/asm-arm/arch-clps711x/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/system.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
- clps_writel(1, HALT);
- __asm__ __volatile__(
- "mov r0, r0\n\
- mov r0, r0");
-}
-
-static inline void arch_reset(char mode)
-{
- cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h
deleted file mode 100644
index 5edaae1..0000000
--- a/include/asm-arm/arch-clps711x/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/time.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- do_leds();
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
-#endif
- do_profile(regs);
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
- clps711x_setup_timer();
- timer_irq.handler = p720t_timer_interrupt;
- setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h
deleted file mode 100644
index dcbb381..0000000
--- a/include/asm-arm/arch-clps711x/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/timex.h
- *
- * Prospector 720T architecture timex specifications
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h
deleted file mode 100644
index 8c5684a..0000000
--- a/include/asm-arm/arch-clps711x/uncompress.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/uncompress.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p) (*(unsigned long *)(p))
-#define __raw_writel(v,p) (*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx SYSFLG2
-#define UARTDRx UARTDR2
-#else
-#define SYSFLGx SYSFLG1
-#define UARTDRx UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
- barrier();
- clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
- while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h
deleted file mode 100644
index a5dfe96..0000000
--- a/include/asm-arm/arch-clps711x/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/vmalloc.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h
deleted file mode 100644
index cc168b7..0000000
--- a/include/asm-arm/arch-davinci/clock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-davinci/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
-
-#endif
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
deleted file mode 100644
index 3ebfcc5..0000000
--- a/include/asm-arm/arch-davinci/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Low-level IRQ helper macros for TI DaVinci-based platforms
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \tmp, [\base, #0x14]
- mov \tmp, \tmp, lsr #2
- sub \irqnr, \tmp, #1
- cmp \tmp, #0
- .endm
-
- .macro irq_prio_table
- .endm
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
deleted file mode 100644
index 54fda73..0000000
--- a/include/asm-arm/arch-davinci/gpio.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DAVINCI_GPIO_H
-#define __DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <asm/arch/hardware.h>
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
- */
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
-
-struct gpio_controller {
- u32 dir;
- u32 out_data;
- u32 set_data;
- u32 clr_data;
- u32 in_data;
- u32 set_rising;
- u32 clr_rising;
- u32 set_falling;
- u32 clr_falling;
- u32 intstat;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct gpio_controller *__iomem
-__gpio_to_controller(unsigned gpio)
-{
- void *__iomem ptr;
-
- if (gpio < 32)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
- else
- ptr = NULL;
- return ptr;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
-
-/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging. Illegal constant parameters
- * cause link-time errors.
- *
- * Otherwise, calls with variable parameters use outlined functions.
- */
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(value)) {
- struct gpio_controller *__iomem g;
- u32 mask;
-
- if (gpio >= DAVINCI_N_GPIO)
- __error_inval_gpio();
-
- g = __gpio_to_controller(gpio);
- mask = __gpio_mask(gpio);
- if (value)
- __raw_writel(mask, &g->set_data);
- else
- __raw_writel(mask, &g->clr_data);
- return;
- }
-
- __gpio_set(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
- *
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
- struct gpio_controller *__iomem g;
-
- if (!__builtin_constant_p(gpio))
- return __gpio_get(gpio);
-
- if (gpio >= DAVINCI_N_GPIO)
- return __error_inval_gpio();
-
- g = __gpio_to_controller(gpio);
- return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
-}
-
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return DAVINCI_N_AINTC_IRQ + gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq - DAVINCI_N_AINTC_IRQ;
-}
-
-#endif /* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
deleted file mode 100644
index ed418ef..0000000
--- a/include/asm-arm/arch-davinci/serial.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/arch/io.h>
-
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
deleted file mode 100644
index 6713e4a..0000000
--- a/include/asm-arm/arch-davinci/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-extern void davinci_watchdog_reset(void);
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static void arch_reset(char mode)
-{
- davinci_watchdog_reset();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
deleted file mode 100644
index f6d1570..0000000
--- a/include/asm-arm/arch-davinci/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- * Author: Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-/* PORT_16C550A, in polled non-fifo mode */
-
-static void putc(char c)
-{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-
- while (!(uart[UART_LSR] & UART_LSR_THRE))
- barrier();
- uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
- while (!(uart[UART_LSR] & UART_LSR_THRE))
- barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
deleted file mode 100644
index 9b47fa8..0000000
--- a/include/asm-arm/arch-davinci/vmalloc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/memory.h>
-#include <asm/arch/io.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
deleted file mode 100644
index 9213bfe..0000000
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
- .macro addruart,rx
- mov \rx, #0xf0000000
- orr \rx, \rx, #0x00000be0
- .endm
-
-#define UART_SHIFT 2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
deleted file mode 100644
index c52f9e2a..0000000
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA110 DMA definitions
- */
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
deleted file mode 100644
index f242be5..0000000
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa110/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h
deleted file mode 100644
index 3ce864d..0000000
--- a/include/asm-arm/arch-ebsa110/hardware.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK1_PHYS 0xf2400000
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK4_PHYS 0xf3000000
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-#define PIT_BASE 0xfc000000
-#define SOFT_BASE 0xfd000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h
deleted file mode 100644
index 44a4001..0000000
--- a/include/asm-arm/arch-ebsa110/io.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
- unsigned int flags)
-{
- return (void __iomem *)cookie;
-}
-
-#define __arch_ioremap __arch_ioremap
-#define __arch_iounmap(cookie) do { } while (0)
-
-extern void insb(unsigned int port, void *buf, int sz);
-extern void insw(unsigned int port, void *buf, int sz);
-extern void insl(unsigned int port, void *buf, int sz);
-
-extern void outsb(unsigned int port, const void *buf, int sz);
-extern void outsw(unsigned int port, const void *buf, int sz);
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h
deleted file mode 100644
index ded9bd9..0000000
--- a/include/asm-arm/arch-ebsa110/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/irqs.h
- *
- * Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
deleted file mode 100644
index c7c500e1..0000000
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h
deleted file mode 100644
index d7c8fec..0000000
--- a/include/asm-arm/arch-ebsa110/system.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/system.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#define arch_reset(mode) cpu_reset(0x80000000)
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h
deleted file mode 100644
index 1e9ef04..0000000
--- a/include/asm-arm/arch-ebsa110/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE 47894000
-
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h
deleted file mode 100644
index ae5b775..0000000
--- a/include/asm-arm/arch-ebsa110/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h
deleted file mode 100644
index 26674ba..0000000
--- a/include/asm-arm/arch-ebsa110/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/vmalloc.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x1f000000)
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
deleted file mode 100644
index b48cec4..0000000
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/dec21285.h>
-
-#ifndef CONFIG_DEBUG_DC21285_PORT
- /* For NetWinder debugging */
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x7c000000 @ physical
- movne \rx, #0xff000000 @ virtual
- orr \rx, \rx, #0x000003f8
- .endm
-
-#define UART_SHIFT 0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
- /* For EBSA285 debugging */
- .equ dc21285_high, ARMCSR_BASE & 0xff000000
- .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x42000000
- movne \rx, #dc21285_high
- .if dc21285_low
- orrne \rx, \rx, #dc21285_low
- .endif
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x160] @ UARTDR
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x178] @ UARTFLG
- tst \rd, #1 << 3
- bne 1001b
- .endm
-
- .macro waituart,rd,rx
- .endm
-#endif
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
deleted file mode 100644
index 0259ad4..0000000
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/dma.h
- *
- * Architecture DMA routines
- *
- * Copyright (C) 1998,1999 Russell King
- * Copyright (C) 1998,1999 Philip Blundell
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x) (0+(x))
-#define _DC21285_DMA(x) (8+(x))
-
-#define MAX_DMA_CHANNELS 10
-
-#define DMA_FLOPPY _ISA_DMA(2)
-#define DMA_ISA_CASCADE _ISA_DMA(4)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
deleted file mode 100644
index e203c62..0000000
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa285/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/hardware/dec21285.h>
-
- .equ dc21285_high, ARMCSR_BASE & 0xff000000
- .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #dc21285_high
- .if dc21285_low
- orr \base, \base, #dc21285_low
- .endif
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0x180] @ get interrupts
-
- mov \irqnr, #IRQ_SDRAMPARITY
- tst \irqstat, #IRQ_MASK_SDRAMPARITY
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_UART_RX
- movne \irqnr, #IRQ_CONRX
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DMA1
- movne \irqnr, #IRQ_DMA1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DMA2
- movne \irqnr, #IRQ_DMA2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN0
- movne \irqnr, #IRQ_IN0
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN1
- movne \irqnr, #IRQ_IN1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN2
- movne \irqnr, #IRQ_IN2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN3
- movne \irqnr, #IRQ_IN3
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI
- movne \irqnr, #IRQ_PCI
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DOORBELLHOST
- movne \irqnr, #IRQ_DOORBELLHOST
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_I2OINPOST
- movne \irqnr, #IRQ_I2OINPOST
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER1
- movne \irqnr, #IRQ_TIMER1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER2
- movne \irqnr, #IRQ_TIMER2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER3
- movne \irqnr, #IRQ_TIMER3
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_UART_TX
- movne \irqnr, #IRQ_CONTX
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_ABORT
- movne \irqnr, #IRQ_PCI_ABORT
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_SERR
- movne \irqnr, #IRQ_PCI_SERR
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DISCARD_TIMER
- movne \irqnr, #IRQ_DISCARD_TIMER
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_DPERR
- movne \irqnr, #IRQ_PCI_DPERR
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_PERR
- movne \irqnr, #IRQ_PCI_PERR
-1001:
- .endm
-
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
deleted file mode 100644
index 74610c2..0000000
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/hardware.h
- *
- * Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-/* Virtual Physical Size
- * 0xff800000 0x40000000 1MB X-Bus
- * 0xff000000 0x7c000000 1MB PCI I/O space
- * 0xfe000000 0x42000000 1MB CSR
- * 0xfd000000 0x78000000 1MB Outbound write flush (not supported)
- * 0xfc000000 0x79000000 1MB PCI IACK/special space
- * 0xfb000000 0x7a000000 16MB PCI Config type 1
- * 0xfa000000 0x7b000000 16MB PCI Config type 0
- * 0xf9000000 0x50000000 1MB Cache flush
- * 0xf0000000 0x80000000 16MB ISA memory
- */
-#define XBUS_SIZE 0x00100000
-#define XBUS_BASE 0xff800000
-
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE 0xff000000
-
-#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE 0xfe000000
-
-#define WFLUSH_SIZE 0x00100000
-#define WFLUSH_BASE 0xfd000000
-
-#define PCIIACK_SIZE 0x00100000
-#define PCIIACK_BASE 0xfc000000
-
-#define PCICFG1_SIZE 0x01000000
-#define PCICFG1_BASE 0xfb000000
-
-#define PCICFG0_SIZE 0x01000000
-#define PCICFG0_BASE 0xfa000000
-
-#define PCIMEM_SIZE 0x01000000
-#define PCIMEM_BASE 0xf0000000
-
-#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER (1 << 0)
-#define XBUS_LED_GREEN (1 << 1)
-#define XBUS_LED_RED (1 << 2)
-#define XBUS_LED_TOGGLE (1 << 8)
-
-#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO 0x20
-#define PIC_MASK_LO 0x21
-#define PIC_HI 0xA0
-#define PIC_MASK_HI 0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK 0x800
-#define GPIO_DSCLK 0x400
-#define GPIO_E2CLK 0x200
-#define GPIO_IOLOAD 0x100
-#define GPIO_RED_LED 0x080
-#define GPIO_WDTIMER 0x040
-#define GPIO_DATA 0x020
-#define GPIO_IOCLK 0x010
-#define GPIO_DONE 0x008
-#define GPIO_FAN 0x004
-#define GPIO_GREEN_LED 0x002
-#define GPIO_RESET 0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE 8
-#define CPLD_7111_DISABLE 4
-#define CPLD_UNMUTE 2
-#define CPLD_FLASH_WR_ENABLE 1
-
-#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int gpio_read(void);
-extern void cpld_modify(int mask, int set);
-#endif
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0x81000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
deleted file mode 100644
index e88c6e2..0000000
--- a/include/asm-arm/arch-ebsa285/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * Translation of various region addresses to virtual addresses
- */
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#if 1
-#define __mem_pci(a) (a)
-#else
-
-static inline void __iomem *___mem_pci(void __iomem *p)
-{
- unsigned long a = (unsigned long)p;
- BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
- return p;
-}
-
-#define __mem_pci(a) ___mem_pci(a)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h
deleted file mode 100644
index 3e766f1..0000000
--- a/include/asm-arm/arch-ebsa285/irqs.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/irqs.h
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1998 Phil Blundell
- *
- * Changelog:
- * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder
- * 01-Feb-1999 PJB ISA IRQs start at 0 not 16
- */
-#include <asm/mach-types.h>
-
-#define NR_IRQS 36
-#define NR_DC21285_IRQS 16
-
-#define _ISA_IRQ(x) (0 + (x))
-#define _ISA_INR(x) ((x) - 0)
-#define _DC21285_IRQ(x) (16 + (x))
-#define _DC21285_INR(x) ((x) - 16)
-
-/*
- * This is a list of all interrupts that the 21285
- * can generate and we handle.
- */
-#define IRQ_CONRX _DC21285_IRQ(0)
-#define IRQ_CONTX _DC21285_IRQ(1)
-#define IRQ_TIMER1 _DC21285_IRQ(2)
-#define IRQ_TIMER2 _DC21285_IRQ(3)
-#define IRQ_TIMER3 _DC21285_IRQ(4)
-#define IRQ_IN0 _DC21285_IRQ(5)
-#define IRQ_IN1 _DC21285_IRQ(6)
-#define IRQ_IN2 _DC21285_IRQ(7)
-#define IRQ_IN3 _DC21285_IRQ(8)
-#define IRQ_DOORBELLHOST _DC21285_IRQ(9)
-#define IRQ_DMA1 _DC21285_IRQ(10)
-#define IRQ_DMA2 _DC21285_IRQ(11)
-#define IRQ_PCI _DC21285_IRQ(12)
-#define IRQ_SDRAMPARITY _DC21285_IRQ(13)
-#define IRQ_I2OINPOST _DC21285_IRQ(14)
-#define IRQ_PCI_ABORT _DC21285_IRQ(15)
-#define IRQ_PCI_SERR _DC21285_IRQ(16)
-#define IRQ_DISCARD_TIMER _DC21285_IRQ(17)
-#define IRQ_PCI_DPERR _DC21285_IRQ(18)
-#define IRQ_PCI_PERR _DC21285_IRQ(19)
-
-#define IRQ_ISA_TIMER _ISA_IRQ(0)
-#define IRQ_ISA_KEYBOARD _ISA_IRQ(1)
-#define IRQ_ISA_CASCADE _ISA_IRQ(2)
-#define IRQ_ISA_UART2 _ISA_IRQ(3)
-#define IRQ_ISA_UART _ISA_IRQ(4)
-#define IRQ_ISA_FLOPPY _ISA_IRQ(6)
-#define IRQ_ISA_PRINTER _ISA_IRQ(7)
-#define IRQ_ISA_RTC_ALARM _ISA_IRQ(8)
-#define IRQ_ISA_2 _ISA_IRQ(9)
-#define IRQ_ISA_PS2MOUSE _ISA_IRQ(12)
-#define IRQ_ISA_HARDDISK1 _ISA_IRQ(14)
-#define IRQ_ISA_HARDDISK2 _ISA_IRQ(15)
-
-#define IRQ_MASK_UART_RX (1 << 2)
-#define IRQ_MASK_UART_TX (1 << 3)
-#define IRQ_MASK_TIMER1 (1 << 4)
-#define IRQ_MASK_TIMER2 (1 << 5)
-#define IRQ_MASK_TIMER3 (1 << 6)
-#define IRQ_MASK_IN0 (1 << 8)
-#define IRQ_MASK_IN1 (1 << 9)
-#define IRQ_MASK_IN2 (1 << 10)
-#define IRQ_MASK_IN3 (1 << 11)
-#define IRQ_MASK_DOORBELLHOST (1 << 15)
-#define IRQ_MASK_DMA1 (1 << 16)
-#define IRQ_MASK_DMA2 (1 << 17)
-#define IRQ_MASK_PCI (1 << 18)
-#define IRQ_MASK_SDRAMPARITY (1 << 24)
-#define IRQ_MASK_I2OINPOST (1 << 25)
-#define IRQ_MASK_PCI_ABORT ((1 << 29) | (1 << 30))
-#define IRQ_MASK_PCI_SERR (1 << 23)
-#define IRQ_MASK_DISCARD_TIMER (1 << 27)
-#define IRQ_MASK_PCI_DPERR (1 << 28)
-#define IRQ_MASK_PCI_PERR (1 << 31)
-
-/*
- * Netwinder interrupt allocations
- */
-#define IRQ_NETWINDER_ETHER10 IRQ_IN0
-#define IRQ_NETWINDER_ETHER100 IRQ_IN1
-#define IRQ_NETWINDER_VIDCOMP IRQ_IN2
-#define IRQ_NETWINDER_PS2MOUSE _ISA_IRQ(5)
-#define IRQ_NETWINDER_IR _ISA_IRQ(6)
-#define IRQ_NETWINDER_BUTTON _ISA_IRQ(10)
-#define IRQ_NETWINDER_VGA _ISA_IRQ(11)
-#define IRQ_NETWINDER_SOUND _ISA_IRQ(12)
-
-#undef RTC_IRQ
-#define RTC_IRQ IRQ_ISA_RTC_ALARM
-#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD
-#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
-#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY
-
-#define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
deleted file mode 100644
index 9019a3b..0000000
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings.
- * 17-May-1998 DAG Added __virt_to_bus and __bus_to_virt functions.
- * 21-Nov-1998 RMK Changed __virt_to_bus and __bus_to_virt to macros.
- * 21-Mar-1999 RMK Added PAGE_OFFSET for co285 architecture.
- * Renamed to memory.h
- * Moved PAGE_OFFSET and TASK_SIZE here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-#endif
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-#define __virt_to_bus(x) ((x) - 0xe0000000)
-#define __bus_to_virt(x) ((x) + 0xe0000000)
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
-/* Task size and page offset at 3GB */
-#define TASK_SIZE UL(0xbf000000)
-#define PAGE_OFFSET UL(0xc0000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE 0xf9000000
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#define FLUSH_BASE_PHYS 0x50000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h
deleted file mode 100644
index a720bf7..0000000
--- a/include/asm-arm/arch-ebsa285/system.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- if (mode == 's') {
- /*
- * Jump into the ROM
- */
- cpu_reset(0x41000000);
- } else {
- if (machine_is_netwinder()) {
- /* open up the SuperIO chip
- */
- outb(0x87, 0x370);
- outb(0x87, 0x370);
-
- /* aux function group 1 (logical device 7)
- */
- outb(0x07, 0x370);
- outb(0x07, 0x371);
-
- /* set GP16 for WD-TIMER output
- */
- outb(0xe6, 0x370);
- outb(0x00, 0x371);
-
- /* set a RED LED and toggle WD_TIMER for rebooting
- */
- outb(0xc4, 0x338);
- } else {
- /*
- * Force the watchdog to do a CPU reset.
- *
- * After making sure that the watchdog is disabled
- * (so we can change the timer registers) we first
- * enable the timer to autoreload itself. Next, the
- * timer interval is set really short and any
- * current interrupt request is cleared (so we can
- * see an edge transition). Finally, TIMER4 is
- * enabled as the watchdog.
- */
- *CSR_SA110_CNTL &= ~(1 << 13);
- *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
- TIMER_CNTL_AUTORELOAD |
- TIMER_CNTL_DIV16;
- *CSR_TIMER4_LOAD = 0x2;
- *CSR_TIMER4_CLR = 0;
- *CSR_SA110_CNTL |= (1 << 13);
- }
- }
-}
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h
deleted file mode 100644
index df60b38..0000000
--- a/include/asm-arm/arch-ebsa285/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/timex.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE (50000000/16)
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h
deleted file mode 100644
index 86142c8..0000000
--- a/include/asm-arm/arch-ebsa285/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
- *
- * Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/mach-types.h>
-
-/*
- * Note! This could cause problems on the NetWinder
- */
-#define DC21285_BASE ((volatile unsigned int *)0x42000160)
-#define SER0_BASE ((volatile unsigned char *)0x7c0003f8)
-
-static inline void putc(char c)
-{
- if (machine_is_netwinder()) {
- while ((SER0_BASE[5] & 0x60) != 0x60)
- barrier();
- SER0_BASE[0] = c;
- } else {
- while (DC21285_BASE[6] & 8);
- DC21285_BASE[0] = c;
- }
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
deleted file mode 100644
index e487d7e..0000000
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
deleted file mode 100644
index 397565a..0000000
--- a/include/asm-arm/arch-ep93xx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
- ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
- orr \rx, \rx, #0x000c0000
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
deleted file mode 100644
index 898b3ab..0000000
--- a/include/asm-arm/arch-ep93xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/dma.h
- */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
deleted file mode 100644
index 241ec22..0000000
--- a/include/asm-arm/arch-ep93xx/entry-macro.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(EP93XX_AHB_VIRT_BASE)
- orr \base, \base, #0x000b0000
- mov \irqnr, #0
- ldr \irqstat, [\base] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- eor \base, \base, #0x00070000
- ldr \irqstat, [\base] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-
-1002:
- .endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 625c6f0..0000000
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt phys size
- * fe800000 5M per-platform mappings
- * fed00000 80800000 2M APB
- * fef00000 80000000 1M AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE 0x80000000
-#define EP93XX_AHB_VIRT_BASE 0xfef00000
-#define EP93XX_AHB_SIZE 0x00100000
-
-#define EP93XX_APB_PHYS_BASE 0x80800000
-#define EP93XX_APB_VIRT_BASE 0xfed00000
-#define EP93XX_APB_SIZE 0x00200000
-
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
-
-#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
-#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
-
-#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
-#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
-
-#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
-
-#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
-
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
-
-#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
-#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
-#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
-#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
-#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-
-#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
-#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
-
-#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
-#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
-
-#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
-#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
-
-#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
-
-#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
-
-#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
-
-#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
-
-#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
-#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
-#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
-#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-
-#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
deleted file mode 100644
index 4d0b302..0000000
--- a/include/asm-arm/arch-ep93xx/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
- */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
deleted file mode 100644
index 186e7c7..0000000
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gpio.h
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* GPIO port A. */
-#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B. */
-#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D. */
-#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
-#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E. */
-#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
-#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G. */
-#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H. */
-#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
-#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/*
- * Map GPIO A0..A7 (0..7) to irq 64..71,
- * B0..B7 (7..15) to irq 72..79, and
- * F0..F7 (16..24) to irq 80..87.
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
- return 64 + gpio;
-
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq - gpio_to_irq(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
deleted file mode 100644
index 4233f6e..0000000
--- a/include/asm-arm/arch-ep93xx/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/hardware.h
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "ep93xx-regs.h"
-
-#define pcibios_assign_all_busses() 0
-
-#include "platform.h"
-
-#include "gesbc9312.h"
-#include "ts72xx.h"
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
deleted file mode 100644
index 7b4d25e..0000000
--- a/include/asm-arm/arch-ep93xx/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/io.h
- */
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p) ((void __iomem *)(p))
-#define __mem_pci(p) (p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
deleted file mode 100644
index 53d4a68..0000000
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX 2
-#define IRQ_EP93XX_COMMTX 3
-#define IRQ_EP93XX_TIMER1 4
-#define IRQ_EP93XX_TIMER2 5
-#define IRQ_EP93XX_AACINTR 6
-#define IRQ_EP93XX_DMAM2P0 7
-#define IRQ_EP93XX_DMAM2P1 8
-#define IRQ_EP93XX_DMAM2P2 9
-#define IRQ_EP93XX_DMAM2P3 10
-#define IRQ_EP93XX_DMAM2P4 11
-#define IRQ_EP93XX_DMAM2P5 12
-#define IRQ_EP93XX_DMAM2P6 13
-#define IRQ_EP93XX_DMAM2P7 14
-#define IRQ_EP93XX_DMAM2P8 15
-#define IRQ_EP93XX_DMAM2P9 16
-#define IRQ_EP93XX_DMAM2M0 17
-#define IRQ_EP93XX_DMAM2M1 18
-#define IRQ_EP93XX_GPIO0MUX 19
-#define IRQ_EP93XX_GPIO1MUX 20
-#define IRQ_EP93XX_GPIO2MUX 21
-#define IRQ_EP93XX_GPIO3MUX 22
-#define IRQ_EP93XX_UART1RX 23
-#define IRQ_EP93XX_UART1TX 24
-#define IRQ_EP93XX_UART2RX 25
-#define IRQ_EP93XX_UART2TX 26
-#define IRQ_EP93XX_UART3RX 27
-#define IRQ_EP93XX_UART3TX 28
-#define IRQ_EP93XX_KEY 29
-#define IRQ_EP93XX_TOUCH 30
-#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
-
-#define IRQ_EP93XX_EXT0 32
-#define IRQ_EP93XX_EXT1 33
-#define IRQ_EP93XX_EXT2 34
-#define IRQ_EP93XX_64HZ 35
-#define IRQ_EP93XX_WATCHDOG 36
-#define IRQ_EP93XX_RTC 37
-#define IRQ_EP93XX_IRDA 38
-#define IRQ_EP93XX_ETHERNET 39
-#define IRQ_EP93XX_EXT3 40
-#define IRQ_EP93XX_PROG 41
-#define IRQ_EP93XX_1HZ 42
-#define IRQ_EP93XX_VSYNC 43
-#define IRQ_EP93XX_VIDEO_FIFO 44
-#define IRQ_EP93XX_SSP1RX 45
-#define IRQ_EP93XX_SSP1TX 46
-#define IRQ_EP93XX_GPIO4MUX 47
-#define IRQ_EP93XX_GPIO5MUX 48
-#define IRQ_EP93XX_GPIO6MUX 49
-#define IRQ_EP93XX_GPIO7MUX 50
-#define IRQ_EP93XX_TIMER3 51
-#define IRQ_EP93XX_UART1 52
-#define IRQ_EP93XX_SSP 53
-#define IRQ_EP93XX_UART2 54
-#define IRQ_EP93XX_UART3 55
-#define IRQ_EP93XX_USB 56
-#define IRQ_EP93XX_ETHERNET_PME 57
-#define IRQ_EP93XX_DSP 58
-#define IRQ_EP93XX_GPIO_AB 59
-#define IRQ_EP93XX_SAI 60
-#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-
-#define NR_EP93XX_IRQS (64 + 24)
-
-#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS 32
-
-#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
deleted file mode 100644
index 4b1a5c7..0000000
--- a/include/asm-arm/arch-ep93xx/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __bus_to_virt(x) __phys_to_virt(x)
-#define __virt_to_bus(x) __virt_to_phys(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
deleted file mode 100644
index 44eccec..0000000
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
-struct ep93xx_eth_data
-{
- unsigned char dev_addr[6];
- unsigned char phy_id;
-};
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
deleted file mode 100644
index f1a5acf..0000000
--- a/include/asm-arm/arch-ep93xx/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/system.h
- */
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- u32 devicecfg;
-
- local_irq_disable();
-
- devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-
- while (1)
- ;
-}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
deleted file mode 100644
index 4140bdd..0000000
--- a/include/asm-arm/arch-ep93xx/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/timex.h
- */
-
-#define CLOCK_TICK_RATE 983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
deleted file mode 100644
index a94f63f..0000000
--- a/include/asm-arm/arch-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt phys size
- * febff000 22000000 4K model number register
- * febfe000 22400000 4K options register
- * febfd000 22800000 4K options register #2
- * febfc000 [67]0000000 4K NAND data register
- * febfb000 [67]0400000 4K NAND control register
- * febfa000 [67]0800000 4K NAND busy register
- * febf9000 10800000 4K TS-5620 RTC index register
- * febf8000 11700000 4K TS-5620 RTC data register
- */
-
-#define TS72XX_MODEL_PHYS_BASE 0x22000000
-#define TS72XX_MODEL_VIRT_BASE 0xfebff000
-#define TS72XX_MODEL_SIZE 0x00001000
-
-#define TS72XX_MODEL_TS7200 0x00
-#define TS72XX_MODEL_TS7250 0x01
-#define TS72XX_MODEL_TS7260 0x02
-
-
-#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
-#define TS72XX_OPTIONS_SIZE 0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485 0x02
-#define TS72XX_OPTIONS_MAX197 0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
-#define TS72XX_OPTIONS2_SIZE 0x00001000
-
-#define TS72XX_OPTIONS2_TS9420 0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
-
-
-#define TS72XX_NOR_PHYS_BASE 0x60000000
-#define TS72XX_NOR2_PHYS_BASE 0x62000000
-
-#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
-#define TS72XX_NAND_DATA_SIZE 0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE 0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE 0x00001000
-
-
-#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000
-#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000
-#define TS72XX_RTC_INDEX_SIZE 0x00001000
-
-#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000
-#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000
-#define TS72XX_RTC_DATA_SIZE 0x00001000
-
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline int board_is_ts7200(void)
-{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
-}
-
-static inline int is_max197_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
- TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
- TS72XX_OPTIONS2_TS9420);
-}
-#endif
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
deleted file mode 100644
index c15274c..0000000
--- a/include/asm-arm/arch-ep93xx/uncompress.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <asm/arch/ep93xx-regs.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
- return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
- return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
- *((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
- *((volatile unsigned int *)ptr) = value;
-}
-
-
-#define PHYS_UART1_DATA 0x808c0000
-#define PHYS_UART1_FLAG 0x808c0018
-#define UART1_FLAG_TXFF 0x20
-
-static inline void putc(int c)
-{
- int i;
-
- for (i = 0; i < 1000; i++) {
- /* Transmit fifo not full? */
- if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
- break;
- }
-
- __raw_writeb(c, PHYS_UART1_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL 0x80010020
-#define ETH_SELF_CTL_RESET 0x00000001
-
-static void ethernet_reset(void)
-{
- unsigned int v;
-
- /* Reset the ethernet MAC. */
- v = __raw_readl(PHYS_ETH_SELF_CTL);
- __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
- /* Wait for reset to finish. */
- while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
- ;
-}
-
-
-static void arch_decomp_setup(void)
-{
- ethernet_reset();
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
deleted file mode 100644
index 205ea6b..0000000
--- a/include/asm-arm/arch-ep93xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h
deleted file mode 100644
index 8021f81..0000000
--- a/include/asm-arm/arch-h720x/boards.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define FLASH_VIRT 0xd0000000
-#define FLASH_PHYS 0x00000000
-#define FLASH_SIZE 0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS 0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT (1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT (1<<6)
-/* pen up interrupt */
-#define IRQ_PEN IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE 0xc1800000
-#define ROM_DISK_START 0x41800000
-#define ROM_DISK_SIZE 0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE 0xf1000000
-#define SRAM_DISK_START 0x04000000
-#define SRAM_DISK_SIZE 0x00400000
-#endif
-
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S
deleted file mode 100644
index 82822d3..0000000
--- a/include/asm-arm/arch-h720x/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-h720x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .equ io_virt, IO_BASE
- .equ io_phys, IO_START
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #io_phys @ physical base address
- movne \rx, #io_virt @ virtual address
- add \rx, \rx, #0x00020000 @ UART1
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0] @ UARTDR
-
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h
deleted file mode 100644
index bfc6636..0000000
--- a/include/asm-arm/arch-h720x/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS 3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS 4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S
deleted file mode 100644
index 38dd63a..0000000
--- a/include/asm-arm/arch-h720x/entry-macro.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
- @ we could use the id register on H7202, but this is not
- @ properly updated when we come back from asm_do_irq
- @ without a previous return from interrupt
- @ (see loops below in irq_svc, irq_usr)
- @ We see unmasked pending ints only, as the masked pending ints
- @ are not visible here
-
- mov \base, #0xf0000000 @ base register
- orr \base, \base, #0x24000 @ irqbase
- ldr \irqstat, [\base, #0x04] @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
- ldr \tmp, =0x001fffff
-#else
- mvn \tmp, #0xc0000000
-#endif
- and \irqstat, \irqstat, \tmp @ mask out unused ints
- mov \irqnr, #0
-
- mov \tmp, #0xff00
- orr \tmp, \tmp, #0xff
- tst \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
- moveq \irqstat, \irqstat, lsr #16
- tst \irqstat, #255
- addeq \irqnr, \irqnr, #8
- moveq \irqstat, \irqstat, lsr #8
- tst \irqstat, #15
- addeq \irqnr, \irqnr, #4
- moveq \irqstat, \irqstat, lsr #4
- tst \irqstat, #3
- addeq \irqnr, \irqnr, #2
- moveq \irqstat, \irqstat, lsr #2
- tst \irqstat, #1
- addeq \irqnr, \irqnr, #1
- moveq \irqstat, \irqstat, lsr #1
- tst \irqstat, #1 @ bit 0 should be set
- .endm
-
- .macro irq_prio_table
- .endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h
deleted file mode 100644
index 49d4f6b..0000000
--- a/include/asm-arm/arch-h720x/h7201-regs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT (IO_VIRT + 0x50100)
-#define SERIAL3_VIRT (IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE 0xe5000000
-#define PCMCIA0_ATT_SIZE 0x00200000
-#define PCMCIA0_ATT_START 0x20000000
-#define PCMCIA0_MEM_BASE 0xe5200000
-#define PCMCIA0_MEM_SIZE 0x00200000
-#define PCMCIA0_MEM_START 0x24000000
-#define PCMCIA0_IO_BASE 0xe5400000
-#define PCMCIA0_IO_SIZE 0x00200000
-#define PCMCIA0_IO_START 0x28000000
-
-#define PCMCIA1_ATT_BASE 0xe5600000
-#define PCMCIA1_ATT_SIZE 0x00200000
-#define PCMCIA1_ATT_START 0x30000000
-#define PCMCIA1_MEM_BASE 0xe5800000
-#define PCMCIA1_MEM_SIZE 0x00200000
-#define PCMCIA1_MEM_START 0x34000000
-#define PCMCIA1_IO_BASE 0xe5a00000
-#define PCMCIA1_IO_SIZE 0x00200000
-#define PCMCIA1_IO_START 0x38000000
-
-#define PRIME3C_BASE 0xf0050000
-#define PRIME3C_SIZE 0x00001000
-#define PRIME3C_START 0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 0x50
-#define VGA_TIMING0 0x60
-#define VGA_TIMING1 0x64
-#define VGA_TIMING2 0x68
-#define VGA_TIMING3 0x6c
-
-#define LCD_CTRL_VGA_ENABLE 0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 0x00000600
-#define LCD_CTRL_VGA_4BPP 0x00000000
-#define LCD_CTRL_VGA_8BPP 0x00000200
-#define LCD_CTRL_VGA_16BPP 0x00000300
-#define LCD_CTRL_SHARE_DMA 0x00000800
-#define LCD_CTRL_VDE 0x00100000
-#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */
-#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */
-
-#define VGA_PALETTE_BASE (IO_VIRT + 0x10800)
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h
deleted file mode 100644
index 43d8ba8..0000000
--- a/include/asm-arm/arch-h720x/h7202-regs.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS 0x2d000
-#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS 0x2e000
-#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT (IO_VIRT + 0x22000)
-#define KBD_KBCR 0x00
-#define KBD_KBSC 0x04
-#define KBD_KBTR 0x08
-#define KBD_KBVR0 0x0C
-#define KBD_KBVR1 0x10
-#define KBD_KBSR 0x18
-
-#define KBD_KBCR_SCANENABLE (1 << 7)
-#define KBD_KBCR_NPOWERDOWN (1 << 2)
-#define KBD_KBCR_CLKSEL_MASK (3)
-#define KBD_KBCR_CLKSEL_PCLK2 0x0
-#define KBD_KBCR_CLKSEL_PCLK128 0x1
-#define KBD_KBCR_CLKSEL_PCLK256 0x2
-#define KBD_KBCR_CLKSEL_PCLK512 0x3
-
-#define KBD_KBSR_INTR (1 << 0)
-#define KBD_KBSR_WAKEUP (1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE (IO_VIRT + 0x12000)
-#define USBD_LENGTH 0x3C
-
-#define USBD_GCTRL 0x00
-#define USBD_EPCTRL 0x04
-#define USBD_INTMASK 0x08
-#define USBD_INTSTAT 0x0C
-#define USBD_PWR 0x10
-#define USBD_DMARXTX 0x14
-#define USBD_DEVID 0x18
-#define USBD_DEVCLASS 0x1C
-#define USBD_INTCLASS 0x20
-#define USBD_SETUP0 0x24
-#define USBD_SETUP1 0x28
-#define USBD_ENDP0RD 0x2C
-#define USBD_ENDP0WT 0x30
-#define USBD_ENDP1RD 0x34
-#define USBD_ENDP2WT 0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE (IO_VIRT + 0x29000)
-#define ADC_CR 0x00
-#define ADC_TSCTRL 0x04
-#define ADC_BT_CTRL 0x08
-#define ADC_MC_CTRL 0x0C
-#define ADC_STATUS 0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 0x80
-#define ADC_CR_DIRECTC 0x04
-#define ADC_CR_CONTIME_NO 0x00
-#define ADC_CR_CONTIME_2 0x04
-#define ADC_CR_CONTIME_4 0x08
-#define ADC_CR_CONTIME_ADE 0x0c
-#define ADC_CR_LONGCALTIME 0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 0x80
-#define ADC_TSCTRL_INTR 0x40
-#define ADC_TSCTRL_SWBYPSS 0x20
-#define ADC_TSCTRL_SWINVT 0x10
-#define ADC_TSCTRL_S400 0x03
-#define ADC_TSCTRL_S200 0x02
-#define ADC_TSCTRL_S100 0x01
-#define ADC_TSCTRL_S50 0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT 0x80
-#define ADC_STATUS_MBT_BIT 0x40
-#define ADC_STATUS_BBT_BIT 0x20
-#define ADC_STATUS_MIC_BIT 0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1 0x30
-#define ADC_TS_X2X3 0x34
-#define ADC_TS_Y0Y1 0x38
-#define ADC_TS_Y2Y3 0x3c
-#define ADC_TS_X4X5 0x40
-#define ADC_TS_X6X7 0x44
-#define ADC_TS_Y4Y5 0x48
-#define ADC_TS_Y6Y7 0x50
-
-/* battery data */
-#define ADC_MB_DATA 0x54
-#define ADC_BB_DATA 0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 0x60
-#define ADC_SD_DAT1 0x64
-#define ADC_SD_DAT2 0x68
-#define ADC_SD_DAT3 0x6c
-#define ADC_SD_DAT4 0x70
-#define ADC_SD_DAT5 0x74
-#define ADC_SD_DAT6 0x78
-#define ADC_SD_DAT7 0x7c
diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h
deleted file mode 100644
index dfb7789..0000000
--- a/include/asm-arm/arch-h720x/hardware.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT 0xf0000000 /* IO peripherals */
-#define IO_PHYS 0x80000000
-#define IO_SIZE 0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT (GPIO_VIRT(0))
-#define GPIO_B_VIRT (GPIO_VIRT(1))
-#define GPIO_C_VIRT (GPIO_VIRT(2))
-#define GPIO_D_VIRT (GPIO_VIRT(3))
-#define GPIO_E_VIRT (GPIO_VIRT(4))
-#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2 (1<<5)
-#define AMULSEL_USOUT2 (1<<6)
-#define AMULSEL_USIN3 (1<<13)
-#define AMULSEL_USOUT3 (1<<14)
-#define AMULSEL_IRDIN (1<<15)
-#define AMULSEL_IRDOUT (1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA 0x00
-#define GPIO_DIR 0x04
-#define GPIO_MASK 0x08
-#define GPIO_STAT 0x0C
-#define GPIO_EDGE 0x10
-#define GPIO_CLR 0x14
-#define GPIO_POL 0x18
-#define GPIO_EN 0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT (IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER 0x00
-#define IRQC_ISR 0x04
-
-/* timer unit */
-#define TIMER_VIRT (IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD 0x00
-#define TM0_COUNT 0x08
-#define TM0_CTRL 0x10
-#define TM1_PERIOD 0x20
-#define TM1_COUNT 0x28
-#define TM1_CTRL 0x30
-#define TM2_PERIOD 0x40
-#define TM2_COUNT 0x48
-#define TM2_CTRL 0x50
-#define TIMER_TOPCTRL 0x60
-#define TIMER_TOPSTAT 0x64
-#define T64_COUNTL 0x80
-#define T64_COUNTH 0x84
-#define T64_CTRL 0x88
-#define T64_BASEL 0x94
-#define T64_BASEH 0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT 0x1
-#define TSTAT_T1INT 0x2
-#define TSTAT_T2INT 0x4
-#define TSTAT_T3INT 0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START 0x1
-#define TM_REPEAT 0x2
-#define TM_RESET 0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR 0x1
-#define ENABLE_TM1_INTR 0x2
-#define ENABLE_TM2_INTR 0x4
-#define TIMER_ENABLE_BIT 0x8
-#define ENABLE_TIMER64 0x10
-#define ENABLE_TIMER64_INT 0x20
-
-/* PMU & PLL */
-#define PMU_BASE (IO_VIRT + 0x1000)
-#define PMU_MODE 0x00
-#define PMU_STAT 0x20
-#define PMU_PLL_CTRL 0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW 0x00
-#define PMU_MODE_RUN 0x01
-#define PMU_MODE_IDLE 0x02
-#define PMU_MODE_SLEEP 0x03
-#define PMU_MODE_INIT 0x04
-#define PMU_MODE_DEEPSLEEP 0x07
-#define PMU_MODE_WAKEUP 0x08
-
-/* PMU ... */
-#define PLL_2_EN 0x8000
-#define PLL_1_EN 0x4000
-#define PLL_3_MUTE 0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET 0x00010000
-#define PLL_CTRL_MASK23 0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE (IO_VIRT + 0x10000)
-#define LCD_CTRL 0x00
-#define LCD_STATUS 0x04
-#define LCD_STATUS_M 0x08
-#define LCD_INTERRUPT 0x0C
-#define LCD_DBAR 0x10
-#define LCD_DCAR 0x14
-#define LCD_TIMING0 0x20
-#define LCD_TIMING1 0x24
-#define LCD_TIMING2 0x28
-#define LCD_TEST 0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE 0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 0x00000006
-#define LCD_CTRL_LCD_4BPP 0x00000000
-#define LCD_CTRL_LCD_8BPP 0x00000002
-#define LCD_CTRL_LCD_16BPP 0x00000004
-#define LCD_CTRL_LCD_BW 0x00000008
-#define LCD_CTRL_LCD_TFT 0x00000010
-#define LCD_CTRL_BGR 0x00001000
-#define LCD_CTRL_LCD_VCOMP 0x00080000
-#define LCD_CTRL_LCD_MONO8 0x00200000
-#define LCD_CTRL_LCD_PWR 0x00400000
-#define LCD_CTRL_LCD_BLE 0x00800000
-#define LCD_CTRL_LDBUSEN 0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE (IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS 0x20000
-#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS 0x21000
-#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE 0x30
-#define SERIAL_ENABLE_EN (1<<0)
-
-/* General defines to pacify gcc */
-#define PCIO_BASE (0) /* for inb, outb and friends */
-#define PCIO_VIRT PCIO_BASE
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
deleted file mode 100644
index 6881482..0000000
--- a/include/asm-arm/arch-h720x/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *
- * 09-19-2001 JJKIM
- * Created from linux/include/asm-arm/arch-l7200/io.h
- *
- * 03-27-2003 Robert Schwebel <r.schwebel@pengutronix.de>:
- * re-unified header files for h720x
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h
deleted file mode 100644
index 8244413..0000000
--- a/include/asm-arm/arch-h720x/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU 0 /* 0x000001 */
-#define IRQ_DMA 1 /* 0x000002 */
-#define IRQ_LCD 2 /* 0x000004 */
-#define IRQ_VGA 3 /* 0x000008 */
-#define IRQ_PCMCIA1 4 /* 0x000010 */
-#define IRQ_PCMCIA2 5 /* 0x000020 */
-#define IRQ_AFE 6 /* 0x000040 */
-#define IRQ_AIC 7 /* 0x000080 */
-#define IRQ_KEYBOARD 8 /* 0x000100 */
-#define IRQ_TIMER0 9 /* 0x000200 */
-#define IRQ_RTC 10 /* 0x000400 */
-#define IRQ_SOUND 11 /* 0x000800 */
-#define IRQ_USB 12 /* 0x001000 */
-#define IRQ_IrDA 13 /* 0x002000 */
-#define IRQ_UART0 14 /* 0x004000 */
-#define IRQ_UART1 15 /* 0x008000 */
-#define IRQ_SPI 16 /* 0x010000 */
-#define IRQ_GPIOA 17 /* 0x020000 */
-#define IRQ_GPIOB 18 /* 0x040000 */
-#define IRQ_GPIOC 19 /* 0x080000 */
-#define IRQ_GPIOD 20 /* 0x100000 */
-#define IRQ_CommRX 21 /* 0x200000 */
-#define IRQ_CommTX 22 /* 0x400000 */
-#define IRQ_Soft 23 /* 0x800000 */
-
-#define NR_GLBL_IRQS 24
-
-#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
- | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU 0 /* 0x00000001 */
-#define IRQ_DMA 1 /* 0x00000002 */
-#define IRQ_LCD 2 /* 0x00000004 */
-#define IRQ_SOUND 3 /* 0x00000008 */
-#define IRQ_I2S 4 /* 0x00000010 */
-#define IRQ_USB 5 /* 0x00000020 */
-#define IRQ_MMC 6 /* 0x00000040 */
-#define IRQ_RTC 7 /* 0x00000080 */
-#define IRQ_UART0 8 /* 0x00000100 */
-#define IRQ_UART1 9 /* 0x00000200 */
-#define IRQ_UART2 10 /* 0x00000400 */
-#define IRQ_UART3 11 /* 0x00000800 */
-#define IRQ_KBD 12 /* 0x00001000 */
-#define IRQ_PS2 13 /* 0x00002000 */
-#define IRQ_AIC 14 /* 0x00004000 */
-#define IRQ_TIMER0 15 /* 0x00008000 */
-#define IRQ_TIMERX 16 /* 0x00010000 */
-#define IRQ_WDT 17 /* 0x00020000 */
-#define IRQ_CAN0 18 /* 0x00040000 */
-#define IRQ_CAN1 19 /* 0x00080000 */
-#define IRQ_EXT0 20 /* 0x00100000 */
-#define IRQ_EXT1 21 /* 0x00200000 */
-#define IRQ_GPIOA 22 /* 0x00400000 */
-#define IRQ_GPIOB 23 /* 0x00800000 */
-#define IRQ_GPIOC 24 /* 0x01000000 */
-#define IRQ_GPIOD 25 /* 0x02000000 */
-#define IRQ_GPIOE 26 /* 0x04000000 */
-#define IRQ_COMMRX 27 /* 0x08000000 */
-#define IRQ_COMMTX 28 /* 0x10000000 */
-#define IRQ_SMC 29 /* 0x20000000 */
-#define IRQ_Soft 30 /* 0x40000000 */
-#define IRQ_RESERVED1 31 /* 0x80000000 */
-#define NR_GLBL_IRQS 32
-
-#define NR_TIMERX_IRQS 3
-
-#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
- (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
- (1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
deleted file mode 100644
index 53e923d..0000000
--- a/include/asm-arm/arch-h720x/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Page offset:
- * ( 0xc0000000UL )
- */
-#define PHYS_OFFSET UL(0x40000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
- */
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
deleted file mode 100644
index ddba937..0000000
--- a/include/asm-arm/arch-h720x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * linux/include/asm-arm/arch-h720x/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <asm/arch/hardware.h>
-
-static void arch_idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-
-static __inline__ void arch_reset(char mode)
-{
- CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-#endif
diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h
deleted file mode 100644
index 48a391c..0000000
--- a/include/asm-arm/arch-h720x/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE 3686400
-
-#endif
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h
deleted file mode 100644
index 61584cd..0000000
--- a/include/asm-arm/arch-h720x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/hardware.h>
-
-#define LSR 0x14
-#define TEMPTY 0x40
-
-static inline void putc(int c)
-{
- volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
- /* wait until transmit buffer is empty */
- while((p[LSR] & TEMPTY) == 0x0)
- barrier();
-
- /* write next character */
- *p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h
deleted file mode 100644
index b4693cb..0000000
--- a/include/asm-arm/arch-h720x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
-
-#endif
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
deleted file mode 100644
index c611871..0000000
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00000000 @ physical
- movne \rx, #0xe0000000 @ virtual
- orreq \rx, \rx, #0x00200000 @ physical
- orr \rx, \rx, #0x00006000 @ UART1 offset
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
deleted file mode 100644
index 5dc0f30..0000000
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-imx/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#define AITC_NIVECSR 0x40
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- ldr \irqstat, [\base, #AITC_NIVECSR]
- @ Shift off the priority leaving the offset or
- @ "interrupt number", use arithmetic shift to
- @ transform illegal source (0xffff) as -1
- mov \irqnr, \irqstat, asr #16
- adds \tmp, \irqnr, #1
- .endm
diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h
deleted file mode 100644
index 4860232..0000000
--- a/include/asm-arm/arch-imx/gpio.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <asm/arch/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL 0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define IMX_GPIO_ALLOC_MODE_RELEASE 8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
- return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if(value)
- DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
- else
- DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
- raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
- if(__builtin_constant_p(gpio))
- imx_gpio_set_value_inline(gpio, value);
- else
- __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- imx_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
deleted file mode 100644
index 6542ca5..0000000
--- a/include/asm-arm/arch-imx/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/hardware.h
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE 0xe0000000
-
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
-#define IMX_CS0_VIRT 0xe8000000
-
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
-#define IMX_CS1_VIRT 0xea000000
-
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
-#define IMX_CS2_VIRT 0xeb000000
-
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
-#define IMX_CS3_VIRT 0xec000000
-
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
-#define IMX_CS4_VIRT 0xed000000
-
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
-#define IMX_CS5_VIRT 0xee000000
-
-#define IMX_FB_VIRT 0xF1000000
-#define IMX_FB_SIZE (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE 0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
deleted file mode 100644
index 1a1d9bb..0000000
--- a/include/asm-arm/arch-imx/io.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
deleted file mode 100644
index 238197c..0000000
--- a/include/asm-arm/arch-imx/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <asm/arch/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
deleted file mode 100644
index 5ad9012..0000000
--- a/include/asm-arm/arch-imx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET UL(0x08000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
deleted file mode 100644
index d90fa4b..0000000
--- a/include/asm-arm/arch-imx/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS 0x10000000
-#define MX1ADS_FLASH_SIZE (16*1024*1024)
-
-#define IMX_FB_PHYS (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/spi_imx.h b/include/asm-arm/arch-imx/spi_imx.h
deleted file mode 100644
index 2165449..0000000
--- a/include/asm-arm/arch-imx/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-imx/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects - 1.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
- u8 num_chipselect;
- u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- * sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- * dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- * I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
- u8 enable_loopback:1;
- u8 enable_dma:1;
- u8 ins_ss_pulse:1;
- u16 bclk_wait:15;
- void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT (1 << 0)
-#define SPI_CS_DEASSERT (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
deleted file mode 100644
index c645fe9..0000000
--- a/include/asm-arm/arch-imx/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode)
-{
- cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
deleted file mode 100644
index da333f6..0000000
--- a/include/asm-arm/arch-imx/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = UART1_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- serial_port = UART2_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- return;
- } while(0);
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
deleted file mode 100644
index cb61691..0000000
--- a/include/asm-arm/arch-imx/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
deleted file mode 100644
index 85b327c..0000000
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x16000000 @ physical base address
- movne \rx, #0xf0000000 @ virtual base
- addne \rx, \rx, #0x16000000 >> 4
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
deleted file mode 100644
index 83fd6bb..0000000
--- a/include/asm-arm/arch-integrator/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
deleted file mode 100644
index ef535a6..0000000
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-integrator/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
- ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
- mov \irqnr, #IRQ_PIC_START
- ldr \irqstat, [\base, #IRQ_STATUS] @ get masked status
- ldr \base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
- teq \irqstat, #0
- ldreq \irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
- moveq \irqnr, #IRQ_CIC_START
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
-
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
deleted file mode 100644
index 6f0947b..0000000
--- a/include/asm-arm/arch-integrator/hardware.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/hardware.h
- *
- * This file contains the hardware definitions of the Integrator.
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE 0xF0000000 // VA of IO
-#define IO_SIZE 0x0B000000 // How much?
-#define IO_START INTEGRATOR_HDR_BASE // PA of IO
-
-#define PCIO_BASE PCI_IO_VADDR
-#define PCIMEM_BASE PCI_MEMORY_VADDR
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE)
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x6000
-#define PCIBIOS_MIN_MEM 0x00100000
-
-#endif
-
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
deleted file mode 100644
index c8f2175..0000000
--- a/include/asm-arm/arch-integrator/io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
-#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h
deleted file mode 100644
index ba7b3af..0000000
--- a/include/asm-arm/arch-integrator/irqs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * Interrupt numbers
- */
-#define IRQ_PIC_START 0
-#define IRQ_SOFTINT 0
-#define IRQ_UARTINT0 1
-#define IRQ_UARTINT1 2
-#define IRQ_KMIINT0 3
-#define IRQ_KMIINT1 4
-#define IRQ_TIMERINT0 5
-#define IRQ_TIMERINT1 6
-#define IRQ_TIMERINT2 7
-#define IRQ_RTCINT 8
-#define IRQ_AP_EXPINT0 9
-#define IRQ_AP_EXPINT1 10
-#define IRQ_AP_EXPINT2 11
-#define IRQ_AP_EXPINT3 12
-#define IRQ_AP_PCIINT0 13
-#define IRQ_AP_PCIINT1 14
-#define IRQ_AP_PCIINT2 15
-#define IRQ_AP_PCIINT3 16
-#define IRQ_AP_V3INT 17
-#define IRQ_AP_CPINT0 18
-#define IRQ_AP_CPINT1 19
-#define IRQ_AP_LBUSTIMEOUT 20
-#define IRQ_AP_APCINT 21
-#define IRQ_CP_CLCDCINT 22
-#define IRQ_CP_MMCIINT0 23
-#define IRQ_CP_MMCIINT1 24
-#define IRQ_CP_AACIINT 25
-#define IRQ_CP_CPPLDINT 26
-#define IRQ_CP_ETHINT 27
-#define IRQ_CP_TSPENINT 28
-#define IRQ_PIC_END 31
-
-#define IRQ_CIC_START 32
-#define IRQ_CM_SOFTINT 32
-#define IRQ_CM_COMMRX 33
-#define IRQ_CM_COMMTX 34
-#define IRQ_CIC_END 34
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START 35
-#define IRQ_SIC_CP_SOFTINT 35
-#define IRQ_SIC_CP_RI0 36
-#define IRQ_SIC_CP_RI1 37
-#define IRQ_SIC_CP_CARDIN 38
-#define IRQ_SIC_CP_LMINT0 39
-#define IRQ_SIC_CP_LMINT1 40
-#define IRQ_SIC_CP_LMINT2 41
-#define IRQ_SIC_CP_LMINT3 42
-#define IRQ_SIC_CP_LMINT4 43
-#define IRQ_SIC_CP_LMINT5 44
-#define IRQ_SIC_CP_LMINT6 45
-#define IRQ_SIC_CP_LMINT7 46
-#define IRQ_SIC_END 46
-
-#define NR_IRQS 47
-
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
deleted file mode 100644
index 1ab56d7..0000000
--- a/include/asm-arm/arch-integrator/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h
deleted file mode 100644
index 8ea4422..0000000
--- a/include/asm-arm/arch-integrator/system.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/cm.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-#endif
diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h
deleted file mode 100644
index 87a7628..0000000
--- a/include/asm-arm/arch-integrator/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/timex.h
- *
- * Integrator architecture timex specifications
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h
deleted file mode 100644
index f61825c..0000000
--- a/include/asm-arm/arch-integrator/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h
deleted file mode 100644
index 170ccce..0000000
--- a/include/asm-arm/arch-integrator/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h
deleted file mode 100644
index 26f60af..0000000
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright(c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-#define ADMA_ACCR(chan) (chan->mmr_base + 0x0)
-#define ADMA_ACSR(chan) (chan->mmr_base + 0x4)
-#define ADMA_ADAR(chan) (chan->mmr_base + 0x8)
-#define ADMA_IIPCR(chan) (chan->mmr_base + 0x18)
-#define ADMA_IIPAR(chan) (chan->mmr_base + 0x1c)
-#define ADMA_IIPUAR(chan) (chan->mmr_base + 0x20)
-#define ADMA_ANDAR(chan) (chan->mmr_base + 0x24)
-#define ADMA_ADCR(chan) (chan->mmr_base + 0x28)
-#define ADMA_CARMD(chan) (chan->mmr_base + 0x2c)
-#define ADMA_ABCR(chan) (chan->mmr_base + 0x30)
-#define ADMA_DLADR(chan) (chan->mmr_base + 0x34)
-#define ADMA_DUADR(chan) (chan->mmr_base + 0x38)
-#define ADMA_SLAR(src, chan) (chan->mmr_base + (0x3c + (src << 3)))
-#define ADMA_SUAR(src, chan) (chan->mmr_base + (0x40 + (src << 3)))
-
-struct iop13xx_adma_src {
- u32 src_addr;
- union {
- u32 upper_src_addr;
- struct {
- unsigned int pq_upper_src_addr:24;
- unsigned int pq_dmlt:8;
- };
- };
-};
-
-struct iop13xx_adma_desc_ctrl {
- unsigned int int_en:1;
- unsigned int xfer_dir:2;
- unsigned int src_select:4;
- unsigned int zero_result:1;
- unsigned int block_fill_en:1;
- unsigned int crc_gen_en:1;
- unsigned int crc_xfer_dis:1;
- unsigned int crc_seed_fetch_dis:1;
- unsigned int status_write_back_en:1;
- unsigned int endian_swap_en:1;
- unsigned int reserved0:2;
- unsigned int pq_update_xfer_en:1;
- unsigned int dual_xor_en:1;
- unsigned int pq_xfer_en:1;
- unsigned int p_xfer_dis:1;
- unsigned int reserved1:10;
- unsigned int relax_order_en:1;
- unsigned int no_snoop_en:1;
-};
-
-struct iop13xx_adma_byte_count {
- unsigned int byte_count:24;
- unsigned int host_if:3;
- unsigned int reserved:2;
- unsigned int zero_result_err_q:1;
- unsigned int zero_result_err:1;
- unsigned int tx_complete:1;
-};
-
-struct iop13xx_adma_desc_hw {
- u32 next_desc;
- union {
- u32 desc_ctrl;
- struct iop13xx_adma_desc_ctrl desc_ctrl_field;
- };
- union {
- u32 crc_addr;
- u32 block_fill_data;
- u32 q_dest_addr;
- };
- union {
- u32 byte_count;
- struct iop13xx_adma_byte_count byte_count_field;
- };
- union {
- u32 dest_addr;
- u32 p_dest_addr;
- };
- union {
- u32 upper_dest_addr;
- u32 pq_upper_dest_addr;
- };
- struct iop13xx_adma_src src[1];
-};
-
-struct iop13xx_adma_desc_dual_xor {
- u32 next_desc;
- u32 desc_ctrl;
- u32 reserved;
- u32 byte_count;
- u32 h_dest_addr;
- u32 h_upper_dest_addr;
- u32 src0_addr;
- u32 upper_src0_addr;
- u32 src1_addr;
- u32 upper_src1_addr;
- u32 h_src_addr;
- u32 h_upper_src_addr;
- u32 d_src_addr;
- u32 d_upper_src_addr;
- u32 d_dest_addr;
- u32 d_upper_dest_addr;
-};
-
-struct iop13xx_adma_desc_pq_update {
- u32 next_desc;
- u32 desc_ctrl;
- u32 reserved;
- u32 byte_count;
- u32 p_dest_addr;
- u32 p_upper_dest_addr;
- u32 src0_addr;
- u32 upper_src0_addr;
- u32 src1_addr;
- u32 upper_src1_addr;
- u32 p_src_addr;
- u32 p_upper_src_addr;
- u32 q_src_addr;
- struct {
- unsigned int q_upper_src_addr:24;
- unsigned int q_dmlt:8;
- };
- u32 q_dest_addr;
- u32 q_upper_dest_addr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
- return 16;
-}
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
- return __raw_readl(ADMA_ADAR(chan));
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
- u32 next_desc_addr)
-{
- __raw_writel(next_desc_addr, ADMA_ANDAR(chan));
-}
-
-#define ADMA_STATUS_BUSY (1 << 13)
-
-static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
-{
- if (__raw_readl(ADMA_ACSR(chan)) &
- ADMA_STATUS_BUSY)
- return 1;
- else
- return 0;
-}
-
-static inline int
-iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
-{
- return 1;
-}
-#define iop_desc_is_aligned(x, y) 1
-
-static inline int
-iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
- *slots_per_op = 1;
- return 1;
-}
-
-#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
-
-static inline int
-iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
- *slots_per_op = 1;
- return 1;
-}
-
-static inline int
-iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
- static const char slot_count_table[] = { 1, 2, 2, 2,
- 2, 3, 3, 3,
- 3, 4, 4, 4,
- 4, 5, 5, 5,
- };
- *slots_per_op = slot_count_table[src_cnt - 1];
- return *slots_per_op;
-}
-
-#define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->dest_addr;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->byte_count_field.byte_count;
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- int src_idx)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->src[src_idx].src_addr;
-}
-
-static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->desc_ctrl_field.src_select + 1;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.block_fill_en = 1;
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-}
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-
-}
-#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.zero_result = 1;
- u_desc_ctrl.field.status_write_back_en = 1;
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-
- return 1;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- u32 byte_count)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->byte_count = byte_count;
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
- int slots_per_op = desc->slots_per_op;
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
- int i = 0;
-
- if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
- hw_desc->byte_count = len;
- } else {
- do {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
- len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
- i += slots_per_op;
- } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
- if (len) {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->byte_count = len;
- }
- }
-}
-
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- dma_addr_t addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->dest_addr = addr;
- hw_desc->upper_dest_addr = 0;
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
- dma_addr_t addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->src[0].src_addr = addr;
- hw_desc->src[0].upper_src_addr = 0;
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
- int src_idx, dma_addr_t addr)
-{
- int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
- int i = 0;
-
- do {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->src[src_idx].src_addr = addr;
- iter->src[src_idx].upper_src_addr = 0;
- slot_cnt -= slots_per_op;
- if (slot_cnt) {
- i += slots_per_op;
- addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
- }
- } while (slot_cnt);
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- iop_desc_init_memcpy(desc, 1);
- iop_desc_set_byte_count(desc, chan, 0);
- iop_desc_set_dest_addr(desc, chan, 0);
- iop_desc_set_memcpy_src_addr(desc, 0);
-}
-
-#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
- u32 next_desc_addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- BUG_ON(hw_desc->next_desc);
- hw_desc->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
- u32 val)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->block_fill_data = val;
-}
-
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
- struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
-
- BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
-
- if (desc_ctrl.pq_xfer_en)
- return byte_count.zero_result_err_q;
- else
- return byte_count.zero_result_err;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
- u32 adma_accr;
-
- adma_accr = __raw_readl(ADMA_ACCR(chan));
- adma_accr |= 0x2;
- __raw_writel(adma_accr, ADMA_ACCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
- return __raw_readl(ADMA_ACSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
- u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
- adma_chan_ctrl &= ~0x1;
- __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
- u32 adma_chan_ctrl;
-
- adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
- adma_chan_ctrl |= 0x1;
- __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 12);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 11);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(9, &status);
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(4, &status);
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(3, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-#endif /* _ADMA_H */
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
deleted file mode 100644
index 788b4e3..0000000
--- a/include/asm-arm/arch-iop13xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop13xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- moveq \rx, #0xff000000 @ physical
- orreq \rx, \rx, #0x00d80000
- movne \rx, #0xfe000000 @ virtual
- orrne \rx, \rx, #0x00e80000
- orr \rx, \rx, #0x00002300
- orr \rx, \rx, #0x00000040
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
deleted file mode 100644
index 031a0fa..0000000
--- a/include/asm-arm/arch-iop13xx/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-#define TASK_SIZE UL(0x3f000000)
-#define PAGE_OFFSET UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_ARCH_IOP13XX)
-#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
-#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-#define virt_to_lbus(x) \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
-
-#define lbus_to_virt(x) \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
-
-/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
- (strncmp(dev->bus->name, "platform", 8) == 0))
-
-#define __arch_page_to_dma(dev, page) \
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
-
-#endif /* CONFIG_ARCH_IOP13XX */
-#endif /* !ASSEMBLY */
-
-#define PFN_TO_NID(addr) (0)
-
-#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
deleted file mode 100644
index 4041f30..0000000
--- a/include/asm-arm/arch-iop13xx/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \
- PCI_STATUS_SIG_TARGET_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \
- IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \
- IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \
- IOP13XX_ATUE_STAT_ERR_COR | \
- IOP13XX_ATUE_STAT_ERR_UNCOR | \
- IOP13XX_ATUE_STAT_CRS | \
- IOP13XX_ATUE_STAT_DET_PAR_ERR | \
- IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
- IOP13XX_ATUE_STAT_SIG_TABORT | \
- IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
- IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \
- IOP13XX_ATUX_STAT_REC_SCEM | \
- IOP13XX_ATUX_STAT_TX_SERR | \
- IOP13XX_ATUX_STAT_DET_PAR_ERR | \
- IOP13XX_ATUX_STAT_INT_REC_MABORT | \
- IOP13XX_ATUX_STAT_REC_SERR | \
- IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
- IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
- IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
- IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
deleted file mode 100644
index 8575af8..0000000
--- a/include/asm-arm/arch-iop13xx/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop13xx/system.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/iop13xx.h>
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * Reset the internal bus (warning both cores are reset)
- */
- write_wdtcr(IOP_WDTCR_EN_ARM);
- write_wdtcr(IOP_WDTCR_EN);
- write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
- write_wdtcr(0x1000);
-
- for(;;);
-}
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
deleted file mode 100644
index 47564ec..0000000
--- a/include/asm-arm/arch-iop13xx/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
deleted file mode 100644
index 5d4418d..0000000
--- a/include/asm-arm/arch-iop13xx/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
- while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
- UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S
deleted file mode 100644
index 9022b68..0000000
--- a/include/asm-arm/arch-iop32x/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro addruart, rx
- mov \rx, #0xfe000000 @ physical as well as virtual
- orr \rx, \rx, #0x00800000 @ location of the UART
- .endm
-
-#define UART_SHIFT 0
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h
deleted file mode 100644
index e977a9e..0000000
--- a/include/asm-arm/arch-iop32x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S
deleted file mode 100644
index 207db99..0000000
--- a/include/asm-arm/arch-iop32x/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop32x.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mrc p15, 0, \tmp, c15, c1, 0
- orr \tmp, \tmp, #(1 << 6)
- mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
- mrc p15, 0, \tmp, c15, c1, 0
- mov \tmp, \tmp
- sub pc, pc, #4 @ cp_wait
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
- cmp \irqstat, #0
- clzne \irqnr, \irqstat
- rsbne \irqnr, \irqnr, #31
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- mrc p15, 0, \tmp1, c15, c1, 0
- ands \tmp2, \tmp1, #(1 << 6)
- bicne \tmp1, \tmp1, #(1 << 6)
- mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
- .endm
diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h
deleted file mode 100644
index bf0665a..0000000
--- a/include/asm-arm/arch-iop32x/glantank.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/glantank.h
- *
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART 0xfe800000 /* UART */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h
deleted file mode 100644
index 6556ed5..0000000
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop32x.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
deleted file mode 100644
index 47b2736..0000000
--- a/include/asm-arm/arch-iop32x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/arch/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a) (a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a) __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h
deleted file mode 100644
index 0d8af57..0000000
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iop32x.h
- *
- * Intel IOP32X Chip definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP32X_H
-#define __IOP32X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
-#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE 0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h
deleted file mode 100644
index fff4eaf..0000000
--- a/include/asm-arm/arch-iop32x/iq31244.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq31244.h
- *
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART 0xfe800000 /* UART #1 */
-#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h
deleted file mode 100644
index eb69db9..0000000
--- a/include/asm-arm/arch-iop32x/iq80321.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq80321.h
- *
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART 0xfe800000 /* UART #1 */
-#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h
deleted file mode 100644
index bbaef87..0000000
--- a/include/asm-arm/arch-iop32x/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/irqs.h
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright: (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT 0
-#define IRQ_IOP32X_DMA0_EOC 1
-#define IRQ_IOP32X_DMA1_EOT 2
-#define IRQ_IOP32X_DMA1_EOC 3
-#define IRQ_IOP32X_AA_EOT 6
-#define IRQ_IOP32X_AA_EOC 7
-#define IRQ_IOP32X_CORE_PMON 8
-#define IRQ_IOP32X_TIMER0 9
-#define IRQ_IOP32X_TIMER1 10
-#define IRQ_IOP32X_I2C_0 11
-#define IRQ_IOP32X_I2C_1 12
-#define IRQ_IOP32X_MESSAGING 13
-#define IRQ_IOP32X_ATU_BIST 14
-#define IRQ_IOP32X_PERFMON 15
-#define IRQ_IOP32X_CORE_PMU 16
-#define IRQ_IOP32X_BIU_ERR 17
-#define IRQ_IOP32X_ATU_ERR 18
-#define IRQ_IOP32X_MCU_ERR 19
-#define IRQ_IOP32X_DMA0_ERR 20
-#define IRQ_IOP32X_DMA1_ERR 21
-#define IRQ_IOP32X_AA_ERR 23
-#define IRQ_IOP32X_MSG_ERR 24
-#define IRQ_IOP32X_SSP 25
-#define IRQ_IOP32X_XINT0 27
-#define IRQ_IOP32X_XINT1 28
-#define IRQ_IOP32X_XINT2 29
-#define IRQ_IOP32X_XINT3 30
-#define IRQ_IOP32X_HPI 31
-
-#define NR_IRQS 32
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
deleted file mode 100644
index bdcf038..0000000
--- a/include/asm-arm/arch-iop32x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0xa0000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h
deleted file mode 100644
index 77a8af4..0000000
--- a/include/asm-arm/arch-iop32x/n2100.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/n2100.h
- *
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART 0xfe800000 /* UART */
-
-#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h
deleted file mode 100644
index 17b7eb7..0000000
--- a/include/asm-arm/arch-iop32x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- local_irq_disable();
-
- if (machine_is_n2100()) {
- gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
- gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
- while (1)
- ;
- }
-
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h
deleted file mode 100644
index 4457046..0000000
--- a/include/asm-arm/arch-iop32x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/timex.h
- *
- * IOP32x architecture timex specifications
- */
-
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h
deleted file mode 100644
index 0702878..0000000
--- a/include/asm-arm/arch-iop32x/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-static volatile u8 *uart_base;
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
- uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- if (machine_is_iq80321())
- uart_base = (volatile u8 *)IQ80321_UART;
- else if (machine_is_iq31244() || machine_is_em7210())
- uart_base = (volatile u8 *)IQ31244_UART;
- else
- uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h
deleted file mode 100644
index 0a70baa..0000000
--- a/include/asm-arm/arch-iop32x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000
diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S
deleted file mode 100644
index 9e7132e..0000000
--- a/include/asm-arm/arch-iop33x/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- moveq \rx, #0xff000000 @ physical
- movne \rx, #0xfe000000 @ virtual
- orr \rx, \rx, #0x00ff0000
- orr \rx, \rx, #0x0000f700
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h
deleted file mode 100644
index b7775fd..0000000
--- a/include/asm-arm/arch-iop33x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S
deleted file mode 100644
index b8e3d44..0000000
--- a/include/asm-arm/arch-iop33x/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop33x.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mrc p15, 0, \tmp, c15, c1, 0
- orr \tmp, \tmp, #(1 << 6)
- mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
- mrc p15, 0, \tmp, c15, c1, 0
- mov \tmp, \tmp
- sub pc, pc, #4 @ cp_wait
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC
- cmp \irqstat, #0
- mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround
- adds \irqnr, \irqstat, #1
- movne \irqnr, \irqstat, lsr #2
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- mrc p15, 0, \tmp1, c15, c1, 0
- ands \tmp2, \tmp1, #(1 << 6)
- bicne \tmp1, \tmp1, #(1 << 6)
- mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
- .endm
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h
deleted file mode 100644
index 0659cf9..0000000
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
deleted file mode 100644
index 3fc607c..0000000
--- a/include/asm-arm/arch-iop33x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/arch/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a) (a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a) __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h
deleted file mode 100644
index 766985b..0000000
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iop33x.h
- *
- * Intel IOP33X Chip definitions
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP33X_H
-#define __IOP33X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
-#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* UARTs */
-#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
-#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
-#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
-#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ pci on top of physical ram in memory map
- */
-#define IOP33X_MAX_RAM_SIZE 0x80000000UL
-#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h
deleted file mode 100644
index 79b9302..0000000
--- a/include/asm-arm/arch-iop33x/iq80331.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80331.h
- *
- * Intel IQ80331 evaluation board registers
- */
-
-#ifndef __IQ80331_H
-#define __IQ80331_H
-
-#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
-#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
-#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */
-#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h
deleted file mode 100644
index 0531656..0000000
--- a/include/asm-arm/arch-iop33x/iq80332.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80332.h
- *
- * Intel IQ80332 evaluation board registers
- */
-
-#ifndef __IQ80332_H
-#define __IQ80332_H
-
-#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
-#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
-#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */
-#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h
deleted file mode 100644
index d045f84..0000000
--- a/include/asm-arm/arch-iop33x/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/irqs.h
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright: (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT 0
-#define IRQ_IOP33X_DMA0_EOC 1
-#define IRQ_IOP33X_DMA1_EOT 2
-#define IRQ_IOP33X_DMA1_EOC 3
-#define IRQ_IOP33X_AA_EOT 6
-#define IRQ_IOP33X_AA_EOC 7
-#define IRQ_IOP33X_TIMER0 8
-#define IRQ_IOP33X_TIMER1 9
-#define IRQ_IOP33X_I2C_0 10
-#define IRQ_IOP33X_I2C_1 11
-#define IRQ_IOP33X_MSG 12
-#define IRQ_IOP33X_MSGIBQ 13
-#define IRQ_IOP33X_ATU_BIST 14
-#define IRQ_IOP33X_PERFMON 15
-#define IRQ_IOP33X_CORE_PMU 16
-#define IRQ_IOP33X_XINT0 24
-#define IRQ_IOP33X_XINT1 25
-#define IRQ_IOP33X_XINT2 26
-#define IRQ_IOP33X_XINT3 27
-#define IRQ_IOP33X_XINT8 32
-#define IRQ_IOP33X_XINT9 33
-#define IRQ_IOP33X_XINT10 34
-#define IRQ_IOP33X_XINT11 35
-#define IRQ_IOP33X_XINT12 36
-#define IRQ_IOP33X_XINT13 37
-#define IRQ_IOP33X_XINT14 38
-#define IRQ_IOP33X_XINT15 39
-#define IRQ_IOP33X_UART0 51
-#define IRQ_IOP33X_UART1 52
-#define IRQ_IOP33X_PBIE 53
-#define IRQ_IOP33X_ATU_CRW 54
-#define IRQ_IOP33X_ATU_ERR 55
-#define IRQ_IOP33X_MCU_ERR 56
-#define IRQ_IOP33X_DMA0_ERR 57
-#define IRQ_IOP33X_DMA1_ERR 58
-#define IRQ_IOP33X_AA_ERR 60
-#define IRQ_IOP33X_MSG_ERR 62
-#define IRQ_IOP33X_HPI 63
-
-#define NR_IRQS 64
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
deleted file mode 100644
index d798d83..0000000
--- a/include/asm-arm/arch-iop33x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h
deleted file mode 100644
index 00dd07e..0000000
--- a/include/asm-arm/arch-iop33x/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h
deleted file mode 100644
index 75a001e..0000000
--- a/include/asm-arm/arch-iop33x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h
deleted file mode 100644
index 34d9e8e..0000000
--- a/include/asm-arm/arch-iop33x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-static volatile u32 *uart_base;
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
- uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- if (machine_is_iq80331() || machine_is_iq80332())
- uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
- else
- uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h
deleted file mode 100644
index 66f545a..0000000
--- a/include/asm-arm/arch-iop33x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
deleted file mode 100644
index bc8b396..0000000
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xc0000000 @ Physical base
- movne \rx, #0xfe000000 @ virtual base
- orrne \rx, \rx, #0x00f00000
- orr \rx, \rx, #0x00030000
-#ifdef __ARMEB__
- orr \rx, \rx, #0x00000003
-#endif
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
deleted file mode 100644
index 548d8dc..0000000
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
deleted file mode 100644
index 42f3c28..0000000
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE 0xc5000000
-#define ENP2611_CALEB_VIRT_BASE 0xfe000000
-#define ENP2611_CALEB_SIZE 0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000
-#define ENP2611_PM3386_0_SIZE 0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000
-#define ENP2611_PM3386_1_SIZE 0x00100000
-
-#define ENP2611_GPIO_SCL 7
-#define ENP2611_GPIO_SDA 6
-
-#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
deleted file mode 100644
index 11d512a..0000000
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \irqnr, #0x0 @clear out irqnr as default
- mov \base, #0xfe000000
- orr \base, \base, #0x00e00000
- orr \base, \base, #0x08
- ldr \irqstat, [\base] @ get interrupts
-
- cmp \irqstat, #0
- beq 1001f
-
- clz \irqnr, \irqstat
- mov \base, #31
- subs \irqnr, \base, \irqnr
-
- /*
- * We handle PCIA and PCIB here so we don't have an
- * extra layer of code just to check these two bits.
- */
- cmp \irqnr, #IRQ_IXP2000_PCI
- bne 1001f
-
- mov \base, #0xfe000000
- orr \base, \base, #0x00c00000
- orr \base, \base, #0x00000100
- orr \base, \base, #0x00000058
- ldr \irqstat, [\base]
-
- mov \tmp, #(1<<26)
- tst \irqstat, \tmp
- movne \irqnr, #IRQ_IXP2000_PCIA
- bne 1001f
-
- mov \tmp, #(1<<27)
- tst \irqstat, \tmp
- movne \irqnr, #IRQ_IXP2000_PCIB
-
-1001:
- .endm
-
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
deleted file mode 100644
index 03cbbe1..0000000
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-#define IXP2000_GPIO_LOW 0
-#define IXP2000_GPIO_HIGH 1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
- return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
- if (value == IXP2000_GPIO_HIGH) {
- ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
- } else if (value == IXP2000_GPIO_LOW) {
- ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
- }
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h
deleted file mode 100644
index e7ea781..0000000
--- a/include/asm-arm/arch-ixp2000/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-/*
- * This needs to be platform-specific?
- */
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0x00000000
-
-#include "ixp2000-regs.h" /* Chipset Registers */
-
-#define pcibios_assign_all_busses() 0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h" /* ENP-2611 */
-#include "ixdp2x00.h" /* IXDP2400/2800 */
-#include "ixdp2x01.h" /* IXDP2401/2801 */
-
-#endif /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
deleted file mode 100644
index 5dc1d25..0000000
--- a/include/asm-arm/arch-ixp2000/io.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __mem_pci(a) (a)
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions. This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p) __raw_writeb((v),alignb(___io(p)))
-#define outw(v,p) __raw_writew((v),alignw(___io(p)))
-#define outl(v,p) __raw_writel((v),___io(p))
-
-#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p) \
- ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p) \
- ({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l) __raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l) __raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readb(alignb(p)); \
- } else { \
- __v = __raw_readb(p); \
- } \
- \
- __v; \
- }) \
-
-#define ioread16(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readw(alignw(p)); \
- } else { \
- __v = le16_to_cpu(__raw_readw(p)); \
- } \
- \
- __v; \
- })
-
-#define ioread32(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readl(p); \
- } else { \
- __v = le32_to_cpu(__raw_readl(p)); \
- } \
- \
- __v; \
- })
-
-#define iowrite8(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writeb((v), alignb(p)); \
- } else { \
- __raw_writeb((v), p); \
- } \
- })
-
-#define iowrite16(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writew((v), alignw(p)); \
- } else { \
- __raw_writew(cpu_to_le16(v), p); \
- } \
- })
-
-#define iowrite32(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writel((v), p); \
- } else { \
- __raw_writel(cpu_to_le32(v), p); \
- } \
- })
-
-#define ioport_map(port, nr) ___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h
deleted file mode 100644
index 62f09c7..0000000
--- a/include/asm-arm/arch-ixp2000/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */
-#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/
-#define IRQ_IXP2000_UART 2
-#define IRQ_IXP2000_GPIO 3
-#define IRQ_IXP2000_TIMER1 4
-#define IRQ_IXP2000_TIMER2 5
-#define IRQ_IXP2000_TIMER3 6
-#define IRQ_IXP2000_TIMER4 7
-#define IRQ_IXP2000_PMU 8
-#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */
-#define IRQ_IXP2000_DMA1 10
-#define IRQ_IXP2000_DMA2 11
-#define IRQ_IXP2000_DMA3 12
-#define IRQ_IXP2000_PCI_DOORBELL 13
-#define IRQ_IXP2000_ME_ATTN 14
-#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */
-#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */
-#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */
-#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */
-#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */
-#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */
-#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */
-#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */
-#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0 32
-#define IRQ_IXP2000_GPIO1 33
-#define IRQ_IXP2000_GPIO2 34
-#define IRQ_IXP2000_GPIO3 35
-#define IRQ_IXP2000_GPIO4 36
-#define IRQ_IXP2000_GPIO5 37
-#define IRQ_IXP2000_GPIO6 38
-#define IRQ_IXP2000_GPIO7 39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA 40
-#define IRQ_IXP2000_PCIB 41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR 42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR 43
-#define IRQ_IXP2000_DRAM1_MIN_ERR 44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR 45
-#define IRQ_IXP2000_DRAM2_MIN_ERR 46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR 47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR 58
-#define IRQ_IXP2000_SRAM1_ERR 59
-#define IRQ_IXP2000_SRAM2_ERR 60
-#define IRQ_IXP2000_SRAM3_ERR 61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR 66
-#define IRQ_IXP2000_PCI_ERR 67
-#define IRQ_IXP2000_SP_INT 68
-
-#define NR_IXP2000_IRQS 69
-
-#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x))
-
-#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS))
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) )
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define IXP2000_BOARD_IRQS 32
-#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/*
- * IXDP2400 specific IRQs
- */
-#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7)
-
-#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1)
-#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5)
-
-#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1)
-#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/*
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/*
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1)
-
-#define IXDP2401_VALID_IRQ_MASK ( \
- IXDP2X01_VALID_IRQ_MASK | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28)
-
-#define IXDP2801_VALID_IRQ_MASK ( \
- IXDP2X01_VALID_IRQ_MASK | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
deleted file mode 100644
index 546e2e8..0000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000
-#define IXDP2X00_CPLD_SIZE 0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x) \
- (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0)
-#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140)
-
-
-#define IXDP2X00_GPIO_I2C_ENABLE 0x02
-#define IXDP2X00_GPIO_SCL 0x07
-#define IXDP2X00_GPIO_SDA 0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */
-#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */
-#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */
-#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
-
-#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */
-#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */
-#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
-
-#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */
-#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */
-#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
- return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h
deleted file mode 100644
index c6d5142..0000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc.
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000
-#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000
-#define IXDP2X01_CPLD_REGION_SIZE 0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10)
-#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 25
-#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define IXDP2X01_UART_CLK 1843200
-
-#define IXDP2X01_GPIO_I2C_ENABLE 0x02
-#define IXDP2X01_GPIO_SCL 0x07
-#define IXDP2X01_GPIO_SDA 0x06
-
-#endif /* __IXDP2x01_H__ */
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
deleted file mode 100644
index ccae4be..0000000
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt phys size
- * fb000000 db000000 16M PCI CFG1
- * fc000000 da000000 16M PCI CFG0
- * fd000000 d8000000 16M PCI I/O
- * fe[0-7]00000 8M per-platform mappings
- * fe900000 80000000 1M SRAM #0 (first MB)
- * fea00000 cb400000 1M SCRATCH ring get/put
- * feb00000 c8000000 1M MSF
- * fec00000 df000000 1M PCI CSRs
- * fed00000 de000000 1M PCI CREG
- * fee00000 d6000000 1M INTCTL
- * fef00000 c0000000 1M CAP
- */
-
-/*
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages. This has two advantages for us:
- *
- * 1) We use only one TLB entry for large number of on-chip I/O devices.
- *
- * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
- * as required per erratum #66. We accomplish this by using a
- * new MT_IXP2000_DEVICE memory type with the bits set as required.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define IXP2000_CAP_PHYS_BASE 0xc0000000
-#define IXP2000_CAP_VIRT_BASE 0xfef00000
-#define IXP2000_CAP_SIZE 0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000
-#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000
-#define IXP2000_UART_PHYS_BASE 0xc0030000
-#define IXP2000_UART_VIRT_BASE 0xfef30000
-#define IXP2000_TIMER_VIRT_BASE 0xfef20000
-#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000
-#define IXP2000_GPIO_VIRT_BASE 0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE 0xd6000000
-#define IXP2000_INTCTL_VIRT_BASE 0xfee00000
-#define IXP2000_INTCTL_SIZE 0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000
-#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000
-#define IXP2000_PCI_CREG_SIZE 0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000
-#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000
-#define IXP2000_PCI_CSR_SIZE 0x00100000
-
-#define IXP2000_MSF_PHYS_BASE 0xc8000000
-#define IXP2000_MSF_VIRT_BASE 0xfeb00000
-#define IXP2000_MSF_SIZE 0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE 0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE 0x80000000
-#define IXP2000_SRAM0_VIRT_BASE 0xfe900000
-#define IXP2000_SRAM0_SIZE 0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000
-#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000
-#define IXP2000_PCI_IO_SIZE 0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000
-#define IXP2000_PCI_CFG0_SIZE 0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000
-#define IXP2000_PCI_CFG1_SIZE 0x01000000
-
-/*
- * Timers
- */
-#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00)
-#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04)
-#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08)
-#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10)
-#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14)
-#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18)
-#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20)
-#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24)
-#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28)
-#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30)
-#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34)
-#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38)
-#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define IXP2000_TWDE IXP2000_TIMER_REG(0x40)
-
-#define WDT_ENABLE 0x00000001
-#define TIMER_DIVIDER_256 0x00000008
-#define TIMER_ENABLE 0x00000080
-#define IRQ_MASK_TIMER1 (1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define IXP2000_VALID_IRQ_MASK 0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */
-#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */
-#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */
-#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL (1 << 2)
-#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST (1 << 2)
-#define CFG_BOOT_PROM (1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00)
-#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04)
-#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08)
-#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c)
-#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10)
-#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14)
-#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18)
-#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C)
-#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20)
-#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24)
-#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.
- * The CCR configures the clock division for the slowport interface.
- */
-#define SLOWPORT_CCR_DIV_1 0x00
-#define SLOWPORT_CCR_DIV_2 0x01
-#define SLOWPORT_CCR_DIV_4 0x02
-#define SLOWPORT_CCR_DIV_6 0x03
-#define SLOWPORT_CCR_DIV_8 0x04
-#define SLOWPORT_CCR_DIV_10 0x05
-#define SLOWPORT_CCR_DIV_12 0x06
-#define SLOWPORT_CCR_DIV_14 0x07
-#define SLOWPORT_CCR_DIV_16 0x08
-#define SLOWPORT_CCR_DIV_18 0x09
-#define SLOWPORT_CCR_DIV_20 0x0a
-#define SLOWPORT_CCR_DIV_22 0x0b
-#define SLOWPORT_CCR_DIV_24 0x0c
-#define SLOWPORT_CCR_DIV_26 0x0d
-#define SLOWPORT_CCR_DIV_28 0x0e
-#define SLOWPORT_CCR_DIV_30 0x0f
-
-/*
- * PCR values. PCR configure the mode of the interface.
- */
-#define SLOWPORT_MODE_FLASH 0x00
-#define SLOWPORT_MODE_LUCENT 0x01
-#define SLOWPORT_MODE_PMC_SIERRA 0x02
-#define SLOWPORT_MODE_INTEL_UP 0x03
-#define SLOWPORT_MODE_MOTOROLA_UP 0x04
-
-/*
- * ADC values. Defines data and address bus widths.
- */
-#define SLOWPORT_ADDR_WIDTH_8 0x00
-#define SLOWPORT_ADDR_WIDTH_16 0x01
-#define SLOWPORT_ADDR_WIDTH_24 0x02
-#define SLOWPORT_ADDR_WIDTH_32 0x03
-#define SLOWPORT_DATA_WIDTH_8 0x00
-#define SLOWPORT_DATA_WIDTH_16 0x10
-#define SLOWPORT_DATA_WIDTH_24 0x20
-#define SLOWPORT_DATA_WIDTH_32 0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define SLOWPORT_WRTC_MASK_HD 0x0003
-#define SLOWPORT_WRTC_MASK_PW 0x003c
-#define SLOWPORT_WRTC_MASK_SU 0x03c0
-
-#define SLOWPORT_WRTC_SHIFT_HD 0x00
-#define SLOWPORT_WRTC_SHIFT_SU 0x02
-#define SLOWPORT_WRTC_SHFIT_PW 0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000
-#define IXP2000_MAJ_REV_MASK 0x000000F0
-#define IXP2000_MIN_REV_MASK 0x0000000F
-#define IXP2000_PROD_ID_MASK 0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08)
-#define IXP2000_RESET0 GLOBAL_REG(0x0c)
-#define IXP2000_RESET1 GLOBAL_REG(0x10)
-#define IXP2000_CCR GLOBAL_REG(0x14)
-#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18)
-
-#define RSTALL (1 << 16)
-#define WDT_RESET_ENABLE 0x01000000
-
-
-/*
- * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
-
-
-#endif /* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
deleted file mode 100644
index 21e1de5..0000000
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#include <asm/arch/ixp2000-regs.h>
-
-#define __virt_to_bus(v) \
- (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
-
-#define __bus_to_virt(b) \
- __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
deleted file mode 100644
index a66317a..0000000
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
- return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs. We use
- * XCB=101 instead, but that makes all I/O accesses bufferable. This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
- unsigned long dummy;
-
- *((volatile unsigned long *)reg) = val;
-
- dummy = *((volatile unsigned long *)reg);
- __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of
- * the slowport interface that each need different configuration
- * settings. For example, the IXDP2400 uses channel 2 on the interface
- * to access the CPLD, the switch fabric card, and the media card. Each
- * one needs a different mode so drivers must save/restore the mode
- * before and after each operation.
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.
- */
-struct slowport_cfg {
- unsigned long CCR; /* Clock divide */
- unsigned long WTC; /* Write Timing Control */
- unsigned long RTC; /* Read Timing Control */
- unsigned long PCR; /* Protocol Control Register */
- unsigned long ADC; /* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
- unsigned long id = *IXP2000_PRODUCT_ID;
- unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
- IXP2000_MIN_PROD_TYPE_MASK);
- return (((id_prod ==
- /* fixed in IXP2400-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2400)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
- ((id_prod ==
- /* fixed in IXP2800-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2800)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
- ((id_prod ==
- /* fixed in IXP2850-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2850)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
- return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
- return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
- struct flash_platform_data *platform_data;
- int nr_banks;
- unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
- unsigned long sda_pin;
- unsigned long scl_pin;
-};
-
-
-#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
deleted file mode 100644
index 8731dd3..0000000
--- a/include/asm-arm/arch-ixp2000/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- local_irq_disable();
-
- /*
- * Reset flash banking register so that we are pointing at
- * RedBoot bank.
- */
- if (machine_is_ixdp2401()) {
- ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
- ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
- | IXDP2X01_CPLD_FLASH_INTERN));
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
- }
-
- /*
- * On IXDP2801 we need to write this magic sequence to the CPLD
- * to cause a complete reset of the CPU and all external devices
- * and move the flash bank register back to 0.
- */
- if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
- unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
- reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
- ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
- }
-
- ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h
deleted file mode 100644
index b78a183..0000000
--- a/include/asm-arm/arch-ixp2000/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE 50000000
-
-
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h
deleted file mode 100644
index f66b408..0000000
--- a/include/asm-arm/arch-ixp2000/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE 0xc0030000
-
-#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */
-#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/
-#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/
-#define UARTIER PHYS(0x04) /* Interrupt enable reg */
-#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/
-#define UARTLCR PHYS(0x0c) /* Control reg */
-#define UARTSR PHYS(0x14) /* Status reg */
-
-
-static inline void putc(int c)
-{
- int j = 0x1000;
-
- while (--j && !(*UARTSR & UART_LSR_THRE))
- barrier();
-
- *UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h
deleted file mode 100644
index 2751369..0000000
--- a/include/asm-arm/arch-ixp2000/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END 0xfb000000
diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S
deleted file mode 100644
index 2b25e64..0000000
--- a/include/asm-arm/arch-ixp23xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/ixp23xx.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
- ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual
-#ifdef __ARMEB__
- orr \rx, \rx, #0x00000003
-#endif
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h
deleted file mode 100644
index 2f4335e..0000000
--- a/include/asm-arm/arch-ixp23xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/dma.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S
deleted file mode 100644
index ec9dd6f..0000000
--- a/include/asm-arm/arch-ixp23xx/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/entry-macro.S
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
- ldr \irqnr, [\irqnr] @ get interrupt number
- cmp \irqnr, #0x0 @ spurious interrupt ?
- movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits
- subne \irqnr, \irqnr, #1 @ convert to 0 based
-
-#if 0
- cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH
- bne 1001f
- mov \irqnr, #IRQ_IXP23XX_INTA
-
- ldr \irqnr, =0xf5000030
-
- mov \tmp, #(1<<26)
- tst \irqnr, \tmp
- movne \irqnr, #IRQ_IXP23XX_INTB
-
- mov \tmp, #(1<<27)
- tst \irqnr, \tmp
- movne \irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
- .endm
diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h
deleted file mode 100644
index c0010d2..0000000
--- a/include/asm-arm/arch-ixp23xx/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-#define PCIO_BASE IXP23XX_PCI_IO_VIRT
-#define PCIBIOS_MIN_IO 0x00000000
-#define PCIBIOS_MIN_MEM 0xe0000000
-
-#include "ixp23xx.h"
-
-#define pcibios_assign_all_busses() 0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h
deleted file mode 100644
index 66f5baf..0000000
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-#define __mem_pci(a) (a)
-
-#include <linux/kernel.h> /* For BUG */
-
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
- if (addr >= IXP23XX_PCI_MEM_START &&
- addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
- if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
- return NULL;
-
- return (void __iomem *)
- ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
- }
-
- return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
- if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
- (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
- return;
-
- __iounmap(addr);
-}
-
-#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f)
-#define __arch_iounmap(a) ixp23xx_iounmap(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h
deleted file mode 100644
index 27c5808..0000000
--- a/include/asm-arm/arch-ixp23xx/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */
-#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */
-#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS 120
-
-#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 32
-
-#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 0
-#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID 0x01FF
-#define IXDP2351_INTB_IRQ_NUM 16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 16
-#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h
deleted file mode 100644
index d5e8a43..0000000
--- a/include/asm-arm/arch-ixp23xx/ixdp2351.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE 0x00100000
-#define IXDP2351_NP_VIRT_BASE 0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE 0x01000000
-#define IXDP2351_BB_BASE_VIRT (0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE (0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */
-#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */
-#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C)
- /* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h
deleted file mode 100644
index 3927b1d..0000000
--- a/include/asm-arm/arch-ixp23xx/ixp23xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt phys size
- * fffd0000 a0000000 64K XSI2CPP_CSR
- * fffc0000 c4000000 4K EXP_CFG
- * fff00000 c8000000 64K PERIPHERAL
- * fe000000 1c0000000 16M CAP_CSR
- * fd000000 1c8000000 16M MSF_CSR
- * fb000000 16M ---
- * fa000000 1d8000000 32M PCI_IO
- * f8000000 1da000000 32M PCI_CFG
- * f6000000 1de000000 32M PCI_CREG
- * f4000000 32M ---
- * f0000000 1e0000000 64M PCI_MEM
- * e[c-f]000000 per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS 0xc4000000
-#define IXP23XX_EXP_CFG_VIRT 0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE 0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS 0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT 0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE 0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT 0xfe000000
-#define IXP23XX_CAP_CSR_SIZE 0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT 0xfd000000
-#define IXP23XX_MSF_CSR_SIZE 0x01000000
-
-#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT 0xfa000000
-#define IXP23XX_PCI_IO_SIZE 0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT 0xf8000000
-#define IXP23XX_PCI_CFG_SIZE 0x02000000
-#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT 0xf6000000
-#define IXP23XX_PCI_CREG_SIZE 0x02000000
-#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START 0xe0000000
-#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT 0xf0000000
-#define IXP23XX_PCI_MEM_SIZE 0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF (1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE (0x2)
-#define IXP23XX_FLASH_BUS8 (0x1)
-
-#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS 0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK 0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE 3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e
-#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE (1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT (1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK (0x3)
-#define IXP23XX_TIMER_DISABLED (0x0)
-#define IXP23XX_TIMER1_INT_PEND (1 << 0)
-#define IXP23XX_TIMER2_INT_PEND (1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG (1 << 24)
-#define IXP23XX_SHPC_INIT_COMP (1 << 21)
-#define IXP23XX_RST_ALL (1 << 16)
-#define IXP23XX_RESET_PCI (1 << 2)
-#define IXP23XX_PCI_UNIT_RESET (1 << 1)
-#define IXP23XX_XSCALE_RESET (1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
deleted file mode 100644
index c3d906a..0000000
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET (0x00000000)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-
-#define __virt_to_bus(v) \
- ({ unsigned int ret; \
- ret = ((__virt_to_phys(v) - 0x00000000) + \
- (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \
- ret; })
-
-#define __bus_to_virt(b) \
- ({ unsigned int data; \
- data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
- __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-
-#define arch_is_coherent() 1
-
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h
deleted file mode 100644
index db8aa30..0000000
--- a/include/asm-arm/arch-ixp23xx/platform.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
- return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL 14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
- return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h
deleted file mode 100644
index 54e8a51..0000000
--- a/include/asm-arm/arch-ixp23xx/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle();
-#endif
-}
-
-static inline void arch_reset(char mode)
-{
- /* First try machine specific support */
- if (machine_is_ixdp2351()) {
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
- (void) *IXDP2351_CPLD_RESET1_REG;
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
- }
-
- /* Use on-chip reset capability */
- *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h
deleted file mode 100644
index f6828fd..0000000
--- a/include/asm-arm/arch-ixp23xx/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/time.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h
deleted file mode 100644
index 516f72f..0000000
--- a/include/asm-arm/arch-ixp23xx/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h
deleted file mode 100644
index 16c1110..0000000
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
- int j;
-
- for (j = 0; j < 0x1000; j++) {
- if (UART_BASE[UART_LSR] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h
deleted file mode 100644
index 9f25666..0000000
--- a/include/asm-arm/arch-ixp23xx/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END (0xec000000)
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h
deleted file mode 100644
index 88f053d..0000000
--- a/include/asm-arm/arch-ixp4xx/avila.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/avila.h
- *
- * Gateworks Avila platform specific definitions
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp425.h
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define AVILA_SDA_PIN 7
-#define AVILA_SCL_PIN 6
-
-/*
- * AVILA PCI IRQs
- */
-#define AVILA_PCI_MAX_DEV 4
-#define LOFT_PCI_MAX_DEV 6
-#define AVILA_PCI_IRQ_LINES 4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define AVILA_PCI_INTA_PIN 11
-#define AVILA_PCI_INTB_PIN 10
-#define AVILA_PCI_INTC_PIN 9
-#define AVILA_PCI_INTD_PIN 8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
deleted file mode 100644
index 428b298a..0000000
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define COYOTE_PCI_SLOT0_PIN 6
-#define COYOTE_PCI_SLOT1_PIN 11
-
-#define COYOTE_PCI_SLOT0_DEVID 14
-#define COYOTE_PCI_SLOT1_DEVID 15
-
-#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
-#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
-#define COYOTE_IDE_REGION_SIZE 0x1000
-
-#define COYOTE_IDE_DATA_PORT 0xFFFE10E0
-#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC
-#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2
-
diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
deleted file mode 100644
index 2fa3d6b..0000000
--- a/include/asm-arm/arch-ixp4xx/cpu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-extern unsigned int processor_id;
-/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE 0x69054040
-#define IXP465_PROCESSOR_ID_VALUE 0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
-
-#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
- unsigned int val = ~*IXP4XX_EXP_CFG2;
- val &= ~IXP4XX_FEATURE_RESERVED;
- if (!cpu_is_ixp46x())
- val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-
- return val;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
- *IXP4XX_EXP_CFG2 = ~value;
-}
-
-#endif /* _ASM_ARCH_CPU_H */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
deleted file mode 100644
index 37bc8ef..0000000
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xc8000000
- movne \rx, #0xff000000
- orrne \rx, \rx, #0x00b00000
- add \rx,\rx,#3 @ Uart regs are at off set of 3 if
- @ byte writes used - Big Endian.
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
deleted file mode 100644
index 0b755d6..0000000
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h
deleted file mode 100644
index 5afae8c..0000000
--- a/include/asm-arm/arch-ixp4xx/dsmg600.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * DSM-G600 platform specific definitions
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- * Copyright 2004 (C) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define DSMG600_SDA_PIN 5
-#define DSMG600_SCL_PIN 4
-
-/*
- * DSMG600 PCI IRQs
- */
-#define DSMG600_PCI_MAX_DEV 4
-#define DSMG600_PCI_IRQ_LINES 3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define DSMG600_PCI_INTA_PIN 11
-#define DSMG600_PCI_INTB_PIN 10
-#define DSMG600_PCI_INTC_PIN 9
-#define DSMG600_PCI_INTD_PIN 8
-#define DSMG600_PCI_INTE_PIN 7
-#define DSMG600_PCI_INTF_PIN 6
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ 66000000
-
-/* Buttons */
-
-#define DSMG600_PB_GPIO 15 /* power button */
-#define DSMG600_RB_GPIO 3 /* reset button */
-
-/* Power control */
-
-#define DSMG600_PO_GPIO 2 /* power off */
-
-/* LEDs */
-
-#define DSMG600_LED_PWR_GPIO 0
-#define DSMG600_LED_WLAN_GPIO 14
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
deleted file mode 100644
index ed313c5..0000000
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
- ldr \irqstat, [\irqstat] @ get interrupts
- cmp \irqstat, #0
- beq 1001f @ upper IRQ?
- clz \irqnr, \irqstat
- mov \base, #31
- sub \irqnr, \base, \irqnr
- b 1002f @ lower IRQ being
- @ handled
-
-1001:
- /*
- * IXP465/IXP435 has an upper IRQ status register
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
- ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
- ldr \irqstat, [\irqstat] @ get upper interrupts
- mov \irqnr, #63
- clz \irqstat, \irqstat
- cmp \irqstat, #32
- subne \irqnr, \irqnr, \irqstat
-#endif
-1002:
- .endm
-
-
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
deleted file mode 100644
index 168b984..0000000
--- a/include/asm-arm/arch-ixp4xx/fsg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/fsg.h
- *
- * Freecom FSG-3 platform specific definitions
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Tomasz Chmielewski <mangoo@wpkg.org>
- * Maintainers: http://www.nslu2-linux.org
- *
- * Based on coyote.h by
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define FSG_SDA_PIN 12
-#define FSG_SCL_PIN 13
-
-/*
- * FSG PCI IRQs
- */
-#define FSG_PCI_MAX_DEV 3
-#define FSG_PCI_IRQ_LINES 3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define FSG_PCI_INTA_PIN 6
-#define FSG_PCI_INTB_PIN 7
-#define FSG_PCI_INTC_PIN 5
-
-/* Buttons */
-
-#define FSG_SB_GPIO 4 /* sync button */
-#define FSG_RB_GPIO 9 /* reset button */
-#define FSG_UB_GPIO 10 /* usb button */
-
-/* LEDs */
-
-#define FSG_LED_WLAN_BIT 0
-#define FSG_LED_WAN_BIT 1
-#define FSG_LED_SATA_BIT 2
-#define FSG_LED_USB_BIT 4
-#define FSG_LED_RING_BIT 5
-#define FSG_LED_SYNC_BIT 7
diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h
deleted file mode 100644
index 28e7d27..0000000
--- a/include/asm-arm/arch-ixp4xx/gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <asm/arch/hardware.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- gpio_line_config(gpio, IXP4XX_GPIO_IN);
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
- gpio_line_set(gpio, level);
- gpio_line_config(gpio, IXP4XX_GPIO_OUT);
- return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- int value;
-
- gpio_line_get(gpio, &value);
-
- return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-extern int irq_to_gpio(int gpio);
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
deleted file mode 100644
index 2192ded..0000000
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/gtwx5715.h
- *
- * Gemtek GTWX5715 Gateway (Linksys WRV54G)
- *
- * Copyright 2004 (c) George T. Joseph
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-#include "irqs.h"
-
-#define GTWX5715_GPIO0 0
-#define GTWX5715_GPIO1 1
-#define GTWX5715_GPIO2 2
-#define GTWX5715_GPIO3 3
-#define GTWX5715_GPIO4 4
-#define GTWX5715_GPIO5 5
-#define GTWX5715_GPIO6 6
-#define GTWX5715_GPIO7 7
-#define GTWX5715_GPIO8 8
-#define GTWX5715_GPIO9 9
-#define GTWX5715_GPIO10 10
-#define GTWX5715_GPIO11 11
-#define GTWX5715_GPIO12 12
-#define GTWX5715_GPIO13 13
-#define GTWX5715_GPIO14 14
-
-#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0
-#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1
-#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2
-#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3
-#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4
-#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5
-#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6
-#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7
-#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8
-#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9
-#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10
-#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11
-#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12
-#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1
-#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2
-
-/* PCI controller GPIO to IRQ pin mappings
-
- INTA INTB
-SLOT 0 10 11
-SLOT 1 11 10
-
-*/
-
-#define GTWX5715_PCI_SLOT0_DEVID 0
-#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10
-#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11
-#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ
-#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ
-
-#define GTWX5715_PCI_SLOT1_DEVID 1
-#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11
-#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10
-#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ
-#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ
-
-#define GTWX5715_PCI_SLOT_COUNT 2
-#define GTWX5715_PCI_INT_PIN_COUNT 2
-
-/*
- * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
- * and operate as an SPI type interface. The details of the interface
- * are available on Kendin/Micrel's web site.
- */
-
-#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5
-#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6
-#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7
-#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12
-
-/*
- * The "reset" button is wired to GPIO 3.
- * The GPIO is brought "low" when the button is pushed.
- */
-
-#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3
-#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ
-
-/*
- * Board Label Front Label
- * LED1 Power
- * LED2 Wireless-G
- * LED3 not populated but could be
- * LED4 Internet
- * LED5 - LED8 Controlled by KS8995M Switch
- * LED9 DMZ
- */
-
-#define GTWX5715_LED1_GPIO GTWX5715_GPIO2
-#define GTWX5715_LED2_GPIO GTWX5715_GPIO9
-#define GTWX5715_LED3_GPIO GTWX5715_GPIO8
-#define GTWX5715_LED4_GPIO GTWX5715_GPIO1
-#define GTWX5715_LED9_GPIO GTWX5715_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
deleted file mode 100644
index fa723a6..0000000
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/hardware.h
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
-
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
-#define pcibios_assign_all_busses() 1
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <asm/arch/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-/* Platform specific details */
-#include "ixdp425.h"
-#include "avila.h"
-#include "coyote.h"
-#include "prpmc1100.h"
-#include "nslu2.h"
-#include "nas100d.h"
-#include "dsmg600.h"
-#include "fsg.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
deleted file mode 100644
index 8e74260..0000000
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff0000
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
- * To access PCI via this space, we simply ioremap() the BAR
- * into the kernel and we can use the standard read[bwl]/write[bwl]
- * macros. This is the preffered method due to speed but it
- * limits the system to just 64MB of PCI memory. This can be
- * problamatic if using video cards and other memory-heavy
- * targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can be configured
- * to use indirect registers to access PCI (as we do below for I/O
- * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
- * of memory on the bus. The disadvantage of this is that every
- * PCI access requires three local register accesses plus a spinlock,
- * but in some cases the performance hit is acceptable. In addition,
- * you cannot mmap() PCI devices in this case.
- *
- */
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-
-#define __mem_pci(a) (a)
-
-#else
-
-#include <linux/mm.h>
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
-{
- if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
- return __arm_ioremap(addr, size, mtype);
-
- return (void __iomem *)addr;
-}
-
-static inline void
-__ixp4xx_iounmap(void __iomem *addr)
-{
- if ((__force u32)addr >= VMALLOC_START)
- __iounmap(addr);
-}
-
-#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f)
-#define __arch_iounmap(a) __ixp4xx_iounmap(a)
-
-#define writeb(v, p) __ixp4xx_writeb(v, p)
-#define writew(v, p) __ixp4xx_writew(v, p)
-#define writel(v, p) __ixp4xx_writel(v, p)
-
-#define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
-#define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
-#define writesl(p, v, l) __ixp4xx_writesl(p, v, l)
-
-#define readb(p) __ixp4xx_readb(p)
-#define readw(p) __ixp4xx_readw(p)
-#define readl(p) __ixp4xx_readl(p)
-
-#define readsb(p, v, l) __ixp4xx_readsb(p, v, l)
-#define readsw(p, v, l) __ixp4xx_readsw(p, v, l)
-#define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
-
-static inline void
-__ixp4xx_writeb(u8 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
- __raw_writeb(value, addr);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
-{
- while (count--)
- writeb(*vaddr++, bus_addr);
-}
-
-static inline void
-__ixp4xx_writew(u16 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
- __raw_writew(value, addr);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
-{
- while (count--)
- writew(*vaddr++, bus_addr);
-}
-
-static inline void
-__ixp4xx_writel(u32 value, volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
- if (addr >= VMALLOC_START) {
- __raw_writel(value, p);
- return;
- }
-
- ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void
-__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
-{
- while (count--)
- writel(*vaddr++, bus_addr);
-}
-
-static inline unsigned char
-__ixp4xx_readb(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
- return __raw_readb(addr);
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-static inline void
-__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = readb(bus_addr);
-}
-
-static inline unsigned short
-__ixp4xx_readw(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
- return __raw_readw(addr);
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-static inline void
-__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = readw(bus_addr);
-}
-
-static inline unsigned long
-__ixp4xx_readl(const volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
- u32 data;
-
- if (addr >= VMALLOC_START)
- return __raw_readl(p);
-
- if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-static inline void
-__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l) _memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
-
-#endif
-
-#ifndef CONFIG_PCI
-
-#define __io(v) v
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window. Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction. This means that we need to override the default
- * I/O functions.
- */
-#define outb(p, v) __ixp4xx_outb(p, v)
-#define outw(p, v) __ixp4xx_outw(p, v)
-#define outl(p, v) __ixp4xx_outl(p, v)
-
-#define outsb(p, v, l) __ixp4xx_outsb(p, v, l)
-#define outsw(p, v, l) __ixp4xx_outsw(p, v, l)
-#define outsl(p, v, l) __ixp4xx_outsl(p, v, l)
-
-#define inb(p) __ixp4xx_inb(p)
-#define inw(p) __ixp4xx_inw(p)
-#define inl(p) __ixp4xx_inl(p)
-
-#define insb(p, v, l) __ixp4xx_insb(p, v, l)
-#define insw(p, v, l) __ixp4xx_insw(p, v, l)
-#define insl(p, v, l) __ixp4xx_insl(p, v, l)
-
-
-static inline void
-__ixp4xx_outb(u8 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void
-__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
-{
- while (count--)
- outb(*vaddr++, io_addr);
-}
-
-static inline void
-__ixp4xx_outw(u16 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void
-__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
-{
- while (count--)
- outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-static inline void
-__ixp4xx_outl(u32 value, u32 addr)
-{
- ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-static inline void
-__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
-{
- while (count--)
- outl(*vaddr++, io_addr);
-}
-
-static inline u8
-__ixp4xx_inb(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-static inline void
-__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = inb(io_addr);
-}
-
-static inline u16
-__ixp4xx_inw(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-static inline void
-__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-static inline u32
-__ixp4xx_inl(u32 addr)
-{
- u32 data;
- if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-static inline void
-__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
-{
- while (count--)
- *vaddr++ = inl(io_addr);
-}
-
-#define PIO_OFFSET 0x10000UL
-#define PIO_MASK 0x0ffffUL
-
-#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
- ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-static inline unsigned int
-__ixp4xx_ioread8(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)__ixp4xx_inb(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(port);
-#else
- return (unsigned int)__ixp4xx_readb(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_insb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsb(addr, vaddr, count);
-#else
- __ixp4xx_readsb(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread16(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)__ixp4xx_inw(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu(__raw_readw((u32)port));
-#else
- return (unsigned int)__ixp4xx_readw(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_insw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsw(addr, vaddr, count);
-#else
- __ixp4xx_readsw(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread32(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)__ixp4xx_inl(port & PIO_MASK);
- else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
- return (unsigned int)__ixp4xx_readl(addr);
-#endif
- }
-}
-
-static inline void
-__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_insl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsl(addr, vaddr, count);
-#else
- __ixp4xx_readsl(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8(u8 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outb(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, port);
-#else
- __ixp4xx_writeb(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outsb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesb(addr, vaddr, count);
-#else
- __ixp4xx_writesb(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16(u16 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outw(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writew(cpu_to_le16(value), addr);
-#else
- __ixp4xx_writew(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outsw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesw(addr, vaddr, count);
-#else
- __ixp4xx_writesw(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32(u32 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outl(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
- __ixp4xx_writel(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- __ixp4xx_outsl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesl(addr, vaddr, count);
-#else
- __ixp4xx_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioread8(p) __ixp4xx_ioread8(p)
-#define ioread16(p) __ixp4xx_ioread16(p)
-#define ioread32(p) __ixp4xx_ioread32(p)
-
-#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c)
-#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c)
-#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c)
-
-#define iowrite8(v,p) __ixp4xx_iowrite8(v,p)
-#define iowrite16(v,p) __ixp4xx_iowrite16(v,p)
-#define iowrite32(v,p) __ixp4xx_iowrite32(v,p)
-
-#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c)
-#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c)
-#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c)
-
-#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET))
-#define ioport_unmap(addr)
-#endif // !CONFIG_PCI
-
-#endif // __ASM_ARM_ARCH_IO_H
-
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
deleted file mode 100644
index 674af4a..0000000
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/irqs.h
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-
-#define IRQ_IXP4XX_NPEA 0
-#define IRQ_IXP4XX_NPEB 1
-#define IRQ_IXP4XX_NPEC 2
-#define IRQ_IXP4XX_QM1 3
-#define IRQ_IXP4XX_QM2 4
-#define IRQ_IXP4XX_TIMER1 5
-#define IRQ_IXP4XX_GPIO0 6
-#define IRQ_IXP4XX_GPIO1 7
-#define IRQ_IXP4XX_PCI_INT 8
-#define IRQ_IXP4XX_PCI_DMA1 9
-#define IRQ_IXP4XX_PCI_DMA2 10
-#define IRQ_IXP4XX_TIMER2 11
-#define IRQ_IXP4XX_USB 12
-#define IRQ_IXP4XX_UART2 13
-#define IRQ_IXP4XX_TIMESTAMP 14
-#define IRQ_IXP4XX_UART1 15
-#define IRQ_IXP4XX_WDOG 16
-#define IRQ_IXP4XX_AHB_PMU 17
-#define IRQ_IXP4XX_XSCALE_PMU 18
-#define IRQ_IXP4XX_GPIO2 19
-#define IRQ_IXP4XX_GPIO3 20
-#define IRQ_IXP4XX_GPIO4 21
-#define IRQ_IXP4XX_GPIO5 22
-#define IRQ_IXP4XX_GPIO6 23
-#define IRQ_IXP4XX_GPIO7 24
-#define IRQ_IXP4XX_GPIO8 25
-#define IRQ_IXP4XX_GPIO9 26
-#define IRQ_IXP4XX_GPIO10 27
-#define IRQ_IXP4XX_GPIO11 28
-#define IRQ_IXP4XX_GPIO12 29
-#define IRQ_IXP4XX_SW_INT1 30
-#define IRQ_IXP4XX_SW_INT2 31
-#define IRQ_IXP4XX_USB_HOST 32
-#define IRQ_IXP4XX_I2C 33
-#define IRQ_IXP4XX_SSP 34
-#define IRQ_IXP4XX_TSYNC 35
-#define IRQ_IXP4XX_EAU_DONE 36
-#define IRQ_IXP4XX_SHA_DONE 37
-#define IRQ_IXP4XX_SWCP_PE 58
-#define IRQ_IXP4XX_QM_PE 60
-#define IRQ_IXP4XX_MCU_ECC 61
-#define IRQ_IXP4XX_EXP_PE 62
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS 64
-#else
-#define NR_IRQS 32
-#endif
-
-#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
-
-/*
- * IXDP425 board IRQs
- */
-#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9
-#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
-
-/*
- * Gateworks Avila board IRQs
- */
-#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
-#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
-
-
-/*
- * PrPMC1100 Board IRQs
- */
-#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9
-#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8
-
-/*
- * ADI Coyote Board IRQs
- */
-#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6
-#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
-#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
-
-/*
- * NSLU2 board IRQs
- */
-#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-
-/*
- * NAS100D board IRQs
- */
-#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9
-#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
-#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
-
-/*
- * D-Link DSM-G600 RevA board IRQs
- */
-#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
-#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
-#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
-#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
-#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
-#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
-#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
-#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
deleted file mode 100644
index d0a1dcb..0000000
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixdp425.h
- *
- * IXDP425 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define IXDP425_SDA_PIN 7
-#define IXDP425_SCL_PIN 6
-
-/*
- * IXDP425 PCI IRQs
- */
-#define IXDP425_PCI_MAX_DEV 4
-#define IXDP425_PCI_IRQ_LINES 4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define IXDP425_PCI_INTA_PIN 11
-#define IXDP425_PCI_INTB_PIN 10
-#define IXDP425_PCI_INTC_PIN 9
-#define IXDP425_PCI_INTD_PIN 8
-
-/* NAND Flash pins */
-#define IXDP425_NAND_NCE_PIN 12
-
-#define IXDP425_NAND_CMD_BYTE 0x01
-#define IXDP425_NAND_ADDR_BYTE 0x02
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
deleted file mode 100644
index 68aca85..0000000
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains
- * register location and bit definitions only. Platform specific
- * definitions and helper function declarations are in platform.h
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy Size Virt Description
- * =========================================================================
- *
- * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM
- *
- * 0x48000000 0x04000000 ioremap'd PCI Memory Space
- *
- * 0x50000000 0x10000000 ioremap'd EXP BUS
- *
- * 0x6000000 0x00004000 ioremap'd QMgr
- *
- * 0xC0000000 0x00001000 0xffbff000 PCI CFG
- *
- * 0xC4000000 0x00001000 0xffbfe000 EXP CFG
- *
- * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS (0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE (0x00004000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
-#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000)
-#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000)
-#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
-
-#define IXP4XX_EXP_CS0_OFFSET 0x00
-#define IXP4XX_EXP_CS1_OFFSET 0x04
-#define IXP4XX_EXP_CS2_OFFSET 0x08
-#define IXP4XX_EXP_CS3_OFFSET 0x0C
-#define IXP4XX_EXP_CS4_OFFSET 0x10
-#define IXP4XX_EXP_CS5_OFFSET 0x14
-#define IXP4XX_EXP_CS6_OFFSET 0x18
-#define IXP4XX_EXP_CS7_OFFSET 0x1C
-#define IXP4XX_EXP_CFG0_OFFSET 0x20
-#define IXP4XX_EXP_CFG1_OFFSET 0x24
-#define IXP4XX_EXP_CFG2_OFFSET 0x28
-#define IXP4XX_EXP_CFG3_OFFSET 0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET)
-#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)
-#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET)
-#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET)
-#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET)
-#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
-#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
-#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
-#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
-#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
-#define IXP4XX_GPIO_GPOER_OFFSET 0x04
-#define IXP4XX_GPIO_GPINR_OFFSET 0x08
-#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
-
-/*
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
-
-/*
- * Mask used to clear interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_CLEAR 0x7
-#define IXP4XX_GPIO_STYLE_SIZE 3
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions
- */
-#define IXP4XX_OST_ENABLE 0x00000001
-#define IXP4XX_OST_ONE_SHOT 0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK 0x00000003
-#define IXP4XX_OST_DISABLED 0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
-
-#define IXP4XX_WDT_KEY 0x0000482E
-
-#define IXP4XX_WDT_RESET_ENABLE 0x00000001
-#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
-#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET 0x00
-#define PCI_NP_CBE_OFFSET 0x04
-#define PCI_NP_WDATA_OFFSET 0x08
-#define PCI_NP_RDATA_OFFSET 0x0c
-#define PCI_CRP_AD_CBE_OFFSET 0x10
-#define PCI_CRP_WDATA_OFFSET 0x14
-#define PCI_CRP_RDATA_OFFSET 0x18
-#define PCI_CSR_OFFSET 0x1c
-#define PCI_ISR_OFFSET 0x20
-#define PCI_INTEN_OFFSET 0x24
-#define PCI_DMACTRL_OFFSET 0x28
-#define PCI_AHBMEMBASE_OFFSET 0x2c
-#define PCI_AHBIOBASE_OFFSET 0x30
-#define PCI_PCIMEMBASE_OFFSET 0x34
-#define PCI_AHBDOORBELL_OFFSET 0x38
-#define PCI_PCIDOORBELL_OFFSET 0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
-#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST 0x00000001
-#define PCI_CSR_ARBEN 0x00000002
-#define PCI_CSR_ADS 0x00000004
-#define PCI_CSR_PDS 0x00000008
-#define PCI_CSR_ABE 0x00000010
-#define PCI_CSR_DBT 0x00000020
-#define PCI_CSR_ASE 0x00000100
-#define PCI_CSR_IC 0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE 0x00000001
-#define PCI_ISR_PFE 0x00000002
-#define PCI_ISR_PPE 0x00000004
-#define PCI_ISR_AHBE 0x00000008
-#define PCI_ISR_APDC 0x00000010
-#define PCI_ISR_PADC 0x00000020
-#define PCI_ISR_ADB 0x00000040
-#define PCI_ISR_PDB 0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE 0x00000001
-#define PCI_INTEN_PFE 0x00000002
-#define PCI_INTEN_PPE 0x00000004
-#define PCI_INTEN_AHBE 0x00000008
-#define PCI_INTEN_APDC 0x00000010
-#define PCI_INTEN_PADC 0x00000020
-#define PCI_INTEN_ADB 0x00000040
-#define PCI_INTEN_PDB 0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL 4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL 20
-#define CRP_AD_CBE_WRITE 0x00010000
-
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)
-/* UDC Control Register */
-#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)
-/* UDC Frame Number Register High */
-#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)
-/* UDC Frame Number Register Low */
-#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)
-/* UDC Byte Count Reg 2 */
-#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)
-/* UDC Byte Count Reg 4 */
-#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)
-/* UDC Byte Count Reg 7 */
-#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)
-/* UDC Byte Count Reg 9 */
-#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)
-/* UDC Byte Count Reg 12 */
-#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)
-/* UDC Byte Count Reg 14 */
-#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)
-/* UDC Endpoint 0 Data Register */
-#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)
-/* UDC Endpoint 1 Data Register */
-#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)
-/* UDC Endpoint 2 Data Register */
-#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)
-/* UDC Endpoint 3 Data Register */
-#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)
-/* UDC Endpoint 4 Data Register */
-#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)
-/* UDC Endpoint 5 Data Register */
-#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)
-/* UDC Endpoint 6 Data Register */
-#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)
-/* UDC Endpoint 7 Data Register */
-#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)
-/* UDC Endpoint 8 Data Register */
-#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)
-/* UDC Endpoint 9 Data Register */
-#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)
-/* UDC Endpoint 10 Data Register */
-#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)
-/* UDC Endpoint 11 Data Register */
-#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)
-/* UDC Endpoint 12 Data Register */
-#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)
-/* UDC Endpoint 13 Data Register */
-#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)
-/* UDC Endpoint 14 Data Register */
-#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)
-/* UDC Endpoint 15 Data Register */
-#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)
-/* UDC Interrupt Control Register 0 */
-#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)
-/* UDC Interrupt Control Register 1 */
-#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)
-/* UDC Status Interrupt Register 0 */
-#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)
-/* UDC Status Interrupt Register 1 */
-#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)
-
-#define UDCCR_UDE (1 << 0) /* UDC enable */
-#define UDCCR_UDA (1 << 1) /* UDC active */
-#define UDCCR_RSM (1 << 2) /* Device resume */
-#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
-#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
-#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
-#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
-
-#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
-#define UDCCS0_IPR (1 << 1) /* IN packet ready */
-#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
-#define UDCCS0_SST (1 << 4) /* Sent stall */
-#define UDCCS0_FST (1 << 5) /* Force stall */
-#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
-#define UDCCS0_SA (1 << 7) /* Setup active */
-
-#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_BI_SST (1 << 4) /* Sent stall */
-#define UDCCS_BI_FST (1 << 5) /* Force stall */
-#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
-
-#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_BO_DME (1 << 3) /* DMA enable */
-#define UDCCS_BO_SST (1 << 4) /* Sent stall */
-#define UDCCS_BO_FST (1 << 5) /* Force stall */
-#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
-
-#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
-
-#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
-#define UDCCS_IO_DME (1 << 3) /* DMA enable */
-#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
-
-#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_INT_SST (1 << 4) /* Sent stall */
-#define UDCCS_INT_FST (1 << 5) /* Force stall */
-#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
-
-#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
-#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
-#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
-#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
-#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
-#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
-#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
-#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
-
-#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
-#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
-#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
-#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
-#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
-#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
-#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
-#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-
-#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
-
-#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
-
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/* "fuse" bits of IXP_EXP_CFG2 */
-#define IXP4XX_FEATURE_RCOMP (1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
-#define IXP4XX_FEATURE_HASH (1 << 2)
-#define IXP4XX_FEATURE_AES (1 << 3)
-#define IXP4XX_FEATURE_DES (1 << 4)
-#define IXP4XX_FEATURE_HDLC (1 << 5)
-#define IXP4XX_FEATURE_AAL (1 << 6)
-#define IXP4XX_FEATURE_HSS (1 << 7)
-#define IXP4XX_FEATURE_UTOPIA (1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
-#define IXP4XX_FEATURE_PCI (1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
-#define IXP4XX_FEATURE_USB_HOST (1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
-#define IXP4XX_FEATURE_RSA (1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
- IXP4XX_FEATURE_USB_HOST | \
- IXP4XX_FEATURE_NPEA_ETH | \
- IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
- IXP4XX_FEATURE_RSA | \
- IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
deleted file mode 100644
index af9667b..0000000
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
- ixp4xx_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
deleted file mode 100644
index ecb12d6..0000000
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nas100d.h
- *
- * NAS100D platform specific definitions
- *
- * Copyright (c) 2005 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define NAS100D_SDA_PIN 5
-#define NAS100D_SCL_PIN 6
-
-/*
- * NAS100D PCI IRQs
- */
-#define NAS100D_PCI_MAX_DEV 3
-#define NAS100D_PCI_IRQ_LINES 3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NAS100D_PCI_INTA_PIN 11
-#define NAS100D_PCI_INTB_PIN 10
-#define NAS100D_PCI_INTC_PIN 9
-#define NAS100D_PCI_INTD_PIN 8
-#define NAS100D_PCI_INTE_PIN 7
-
-/* Buttons */
-
-#define NAS100D_PB_GPIO 14 /* power button */
-#define NAS100D_RB_GPIO 4 /* reset button */
-
-/* Power control */
-
-#define NAS100D_PO_GPIO 12 /* power off */
-
-/* LEDs */
-
-#define NAS100D_LED_WLAN_GPIO 0
-#define NAS100D_LED_DISK_GPIO 3
-#define NAS100D_LED_PWR_GPIO 15
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
deleted file mode 100644
index fa895f4..0000000
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nslu2.h
- *
- * NSLU2 platform specific definitions
- *
- * Author: Mark Rakes <mrakes AT mac.com>
- * Maintainers: http://www.nslu2-linux.org
- *
- * based on ixdp425.h:
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define NSLU2_SDA_PIN 7
-#define NSLU2_SCL_PIN 6
-
-/*
- * NSLU2 PCI IRQs
- */
-#define NSLU2_PCI_MAX_DEV 3
-#define NSLU2_PCI_IRQ_LINES 3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NSLU2_PCI_INTA_PIN 11
-#define NSLU2_PCI_INTB_PIN 10
-#define NSLU2_PCI_INTC_PIN 9
-#define NSLU2_PCI_INTD_PIN 8
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-
-#define NSLU2_PB_GPIO 5 /* power button */
-#define NSLU2_PO_GPIO 8 /* power off */
-#define NSLU2_RB_GPIO 12 /* reset button */
-
-/* Buzzer */
-
-#define NSLU2_GPIO_BUZZ 4
-
-/* LEDs */
-
-#define NSLU2_LED_RED_GPIO 0
-#define NSLU2_LED_GRN_GPIO 1
-#define NSLU2_LED_DISK1_GPIO 3
-#define NSLU2_LED_DISK2_GPIO 2
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
deleted file mode 100644
index b2af515..0000000
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef __ARMEB__
-#define REG_OFFSET 0
-#else
-#define REG_OFFSET 3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define IXP4XX_EXP_BUS_BASE(region)\
- (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
- (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
-
-#define IXP4XX_FLASH_WRITABLE (0x2)
-#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
-#define IXP4XX_FLASH_WRITE (0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-#define IXP4XX_UART_XTAL 14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
- volatile u32 *cs0_cfg;
- volatile u32 *cs1_cfg;
- unsigned long cs0_bits;
- unsigned long cs1_bits;
- void __iomem *cs0;
- void __iomem *cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 0x1
-#define IXP4XX_GPIO_IN 0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW 0
-#define IXP4XX_GPIO_HIGH 1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0 14
-#define IXP4XX_GPIO_CLK_1 15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
- if (direction == IXP4XX_GPIO_IN)
- *IXP4XX_GPIO_GPOER |= (1 << line);
- else
- *IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
- *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
- if (value == IXP4XX_GPIO_HIGH)
- *IXP4XX_GPIO_GPOUTR |= (1 << line);
- else if (value == IXP4XX_GPIO_LOW)
- *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h
deleted file mode 100644
index 100855f..0000000
--- a/include/asm-arm/arch-ixp4xx/prpmc1100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/prpmc1100.h
- *
- * Motorolla PrPMC1100 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
-#define PRPMC1100_PCI_MIN_DEVID 10
-#define PRPMC1100_PCI_MAX_DEVID 16
-#define PRPMC1100_PCI_IRQ_LINES 4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define PRPMC1100_PCI_INTA_PIN 11
-#define PRPMC1100_PCI_INTB_PIN 10
-#define PRPMC1100_PCI_INTC_PIN 9
-#define PRPMC1100_PCI_INTD_PIN 8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
deleted file mode 100644
index f11b922..0000000
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle(0);
-#endif
-}
-
-
-static inline void arch_reset(char mode)
-{
- if ( 1 && mode == 's') {
- /* Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
-}
-
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
deleted file mode 100644
index c2559e2..0000000
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/timex.h
- *
- */
-
-#include <asm/arch/hardware.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
deleted file mode 100644
index dbdec36f..0000000
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
deleted file mode 100644
index 34ef48f..0000000
--- a/include/asm-arm/arch-ixp4xx/uncompress.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/uncompress.h
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-static volatile u32* uart_base;
-
-static inline void putc(int c)
-{
- /* Check THRE and TEMT bits before we transmit the character.
- */
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
-
- *uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- /*
- * Some boards are using UART2 as console
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
deleted file mode 100644
index 050d46e..0000000
--- a/include/asm-arm/arch-ixp4xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
- */
-#define VMALLOC_END (0xFF000000)
-
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
deleted file mode 100644
index f55fb8a..0000000
--- a/include/asm-arm/arch-kirkwood/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/kirkwood.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
- ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
deleted file mode 100644
index fc6a43d..0000000
--- a/include/asm-arm/arch-kirkwood/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/kirkwood.h>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
deleted file mode 100644
index e695719..0000000
--- a/include/asm-arm/arch-kirkwood/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
deleted file mode 100644
index 0ef6e95..0000000
--- a/include/asm-arm/arch-kirkwood/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
- + KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
deleted file mode 100644
index 2e7b5da..0000000
--- a/include/asm-arm/arch-kirkwood/irqs.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "kirkwood.h" /* need GPIO_MAX */
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM 0
-#define IRQ_KIRKWOOD_BRIDGE 1
-#define IRQ_KIRKWOOD_HOST2CPU 2
-#define IRQ_KIRKWOOD_CPU2HOST 3
-#define IRQ_KIRKWOOD_XOR_00 5
-#define IRQ_KIRKWOOD_XOR_01 6
-#define IRQ_KIRKWOOD_XOR_10 7
-#define IRQ_KIRKWOOD_XOR_11 8
-#define IRQ_KIRKWOOD_PCIE 9
-#define IRQ_KIRKWOOD_GE00_SUM 11
-#define IRQ_KIRKWOOD_GE01_SUM 15
-#define IRQ_KIRKWOOD_USB 19
-#define IRQ_KIRKWOOD_SATA 21
-#define IRQ_KIRKWOOD_CRYPTO 22
-#define IRQ_KIRKWOOD_SPI 23
-#define IRQ_KIRKWOOD_I2S 24
-#define IRQ_KIRKWOOD_TS_0 26
-#define IRQ_KIRKWOOD_SDIO 28
-#define IRQ_KIRKWOOD_TWSI 29
-#define IRQ_KIRKWOOD_AVB 30
-#define IRQ_KIRKWOOD_TDMI 31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0 33
-#define IRQ_KIRKWOOD_UART_1 34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START 64
-#define NR_GPIO_IRQS GPIO_MAX
-
-#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
deleted file mode 100644
index bb31b315..0000000
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe I/O space
- * f3000000 NAND controller address window
- *
- * virt phys size
- * fee00000 f1000000 1M on-chip peripheral registers
- * fef00000 f2000000 1M PCIe I/O space
- */
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
- * is the minimal window size
- */
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-
-
-#define GPIO_MAX 50
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
deleted file mode 100644
index e5108f4..0000000
--- a/include/asm-arm/arch-kirkwood/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
deleted file mode 100644
index 8dde7e3..0000000
--- a/include/asm-arm/arch-kirkwood/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/kirkwood.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
deleted file mode 100644
index 82122e1..0000000
--- a/include/asm-arm/arch-kirkwood/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
-#define KIRKWOOD_TCLK 166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
deleted file mode 100644
index a9062b6..0000000
--- a/include/asm-arm/arch-kirkwood/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/kirkwood.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
deleted file mode 100644
index 41852c6..0000000
--- a/include/asm-arm/arch-kirkwood/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
deleted file mode 100644
index d2583ff..0000000
--- a/include/asm-arm/arch-ks8695/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-uart.h>
-
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =KS8695_UART_PA @ physical base address
- ldrne \rx, =KS8695_UART_VA @ virtual base address
- .endm
-
- .macro senduart, rd, rx
- str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
- .endm
-
- .macro busyuart, rd, rx
-1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
- tst \rd, #URLS_URTE @ Holding & Shift registers empty?
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
-1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
- tst \rd, #URLS_URTHRE @ Holding Register empty?
- beq 1001b
- .endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
deleted file mode 100644
index 7ad2c65..0000000
--- a/include/asm-arm/arch-ks8695/devices.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/devices.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DEVICES_H
-#define __ASM_ARCH_DEVICES_H
-
-#include <linux/pci.h>
-
- /* Ethernet */
-extern void __init ks8695_add_device_wan(void);
-extern void __init ks8695_add_device_lan(void);
-extern void __init ks8695_add_device_hpna(void);
-
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
- /* PCI */
-#define KS8695_MODE_PCI 0
-#define KS8695_MODE_MINIPCI 1
-#define KS8695_MODE_CARDBUS 2
-
-struct ks8695_pci_cfg {
- short mode;
- int (*map_irq)(struct pci_dev *, u8, u8);
-};
-extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
deleted file mode 100644
index e5159ed..0000000
--- a/include/asm-arm/arch-ks8695/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
deleted file mode 100644
index 3993cfe..0000000
--- a/include/asm-arm/arch-ks8695/entry-macro.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/entry-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * Low-level IRQ helper macros for KS8695
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-irq.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
-
- teq \irqstat, #0
- beq 1001f
-
- mov \irqnr, #0
-
- tst \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tsteq \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tsteq \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tst \irqstat, #0x0f
- moveq \irqstat, \irqstat, lsr #4
- addeq \irqnr, \irqnr, #4
- tst \irqstat, #0x03
- moveq \irqstat, \irqstat, lsr #2
- addeq \irqnr, \irqnr, #2
- tst \irqstat, #0x01
- addeqs \irqnr, \irqnr, #1
-1001:
- .endm
diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h
deleted file mode 100644
index 65ceea2..0000000
--- a/include/asm-arm/arch-ks8695/gpio.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-#define KS8695_GPIO_0 0
-#define KS8695_GPIO_1 1
-#define KS8695_GPIO_2 2
-#define KS8695_GPIO_3 3
-#define KS8695_GPIO_4 4
-#define KS8695_GPIO_5 5
-#define KS8695_GPIO_6 6
-#define KS8695_GPIO_7 7
-#define KS8695_GPIO_8 8
-#define KS8695_GPIO_9 9
-#define KS8695_GPIO_10 10
-#define KS8695_GPIO_11 11
-#define KS8695_GPIO_12 12
-#define KS8695_GPIO_13 13
-#define KS8695_GPIO_14 14
-#define KS8695_GPIO_15 15
-
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
-
-/*
- * Map IRQ number to GPIO line.
- */
-int irq_to_gpio(unsigned int irq);
-
-
-#include <asm-generic/gpio.h>
-
-static inline int gpio_request(unsigned int pin, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned int pin)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
deleted file mode 100644
index cb732bf..0000000
--- a/include/asm-arm/arch-ks8695/hardware.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/hardware.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Memory Map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical RAM address.
- */
-#define KS8695_SDRAM_PA 0x00000000
-
-
-/*
- * We map an entire MiB with the System Configuration Registers in even
- * though only 64KiB is needed. This makes it easier for use with the
- * head debug code as the initial MMU setup only deals in L1 sections.
- */
-#define KS8695_IO_PA 0x03F00000
-#define KS8695_IO_VA 0xF0000000
-#define KS8695_IO_SIZE SZ_1M
-
-#define KS8695_PCIMEM_PA 0x60000000
-#define KS8695_PCIMEM_SIZE SZ_512M
-
-#define KS8695_PCIIO_PA 0x80000000
-#define KS8695_PCIIO_SIZE SZ_64K
-
-
-/*
- * PCI support
- */
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0
-#define PCIBIOS_MIN_MEM 0
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
deleted file mode 100644
index 8edc4bd..0000000
--- a/include/asm-arm/arch-ks8695/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/io.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
deleted file mode 100644
index 8b1c4fe..0000000
--- a/include/asm-arm/arch-ks8695/irqs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/irqs.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define NR_IRQS 32
-
-/*
- * IRQ definitions
- */
-#define KS8695_IRQ_COMM_RX 0
-#define KS8695_IRQ_COMM_TX 1
-#define KS8695_IRQ_EXTERN0 2
-#define KS8695_IRQ_EXTERN1 3
-#define KS8695_IRQ_EXTERN2 4
-#define KS8695_IRQ_EXTERN3 5
-#define KS8695_IRQ_TIMER0 6
-#define KS8695_IRQ_TIMER1 7
-#define KS8695_IRQ_UART_TX 8
-#define KS8695_IRQ_UART_RX 9
-#define KS8695_IRQ_UART_LINE_STATUS 10
-#define KS8695_IRQ_UART_MODEM_STATUS 11
-#define KS8695_IRQ_LAN_RX_STOP 12
-#define KS8695_IRQ_LAN_TX_STOP 13
-#define KS8695_IRQ_LAN_RX_BUF 14
-#define KS8695_IRQ_LAN_TX_BUF 15
-#define KS8695_IRQ_LAN_RX_STATUS 16
-#define KS8695_IRQ_LAN_TX_STATUS 17
-#define KS8695_IRQ_HPNA_RX_STOP 18
-#define KS8695_IRQ_HPNA_TX_STOP 19
-#define KS8695_IRQ_HPNA_RX_BUF 20
-#define KS8695_IRQ_HPNA_TX_BUF 21
-#define KS8695_IRQ_HPNA_RX_STATUS 22
-#define KS8695_IRQ_HPNA_TX_STATUS 23
-#define KS8695_IRQ_BUS_ERROR 24
-#define KS8695_IRQ_WAN_RX_STOP 25
-#define KS8695_IRQ_WAN_TX_STOP 26
-#define KS8695_IRQ_WAN_RX_BUF 27
-#define KS8695_IRQ_WAN_TX_BUF 28
-#define KS8695_IRQ_WAN_RX_STATUS 29
-#define KS8695_IRQ_WAN_TX_STATUS 30
-#define KS8695_IRQ_WAN_LINK 31
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
deleted file mode 100644
index 1b542f7..0000000
--- a/include/asm-arm/arch-ks8695/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/memory.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 Memory definitions
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical SRAM offset.
- */
-#define PHYS_OFFSET KS8695_SDRAM_PA
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PCI
-
-/* PCI mappings */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
-#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
-
-/* Platform-bus mapping */
-extern struct bus_type platform_bus_type;
-#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
- __phys_to_virt(x) : __bus_to_virt(x); })
-#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
- (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
-
-#else
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
deleted file mode 100644
index 6b95d77..0000000
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-gpio.h
- *
- * Copyright (C) 2007 Andrew Victor
- *
- * KS8695 - GPIO control registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_GPIO_H
-#define KS8695_GPIO_H
-
-#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
-#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
-#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
-
-
-#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
-#define KS8695_IOPC (0x04) /* I/O Port Control Register */
-#define KS8695_IOPD (0x08) /* I/O Port Data Register */
-
-
-/* Port Mode Register */
-#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
-
-/* Port Control Register */
-#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
-#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
-#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
-#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
-#define IOPC_IOEINT3_MODE(x) ((x) << 12)
-#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
-#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
-#define IOPC_IOEINT2_MODE(x) ((x) << 8)
-#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
-#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
-#define IOPC_IOEINT1_MODE(x) ((x) << 4)
-#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
-#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
-#define IOPC_IOEINT0_MODE(x) ((x) << 0)
-
- /* Trigger Modes */
-#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
-#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
-#define IOPC_TM_RISING (2) /* Rising Edge Detection */
-#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
-#define IOPC_TM_EDGE (6) /* Both Edge Detection */
-
-/* Port Data Register */
-#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h
deleted file mode 100644
index 14091cd..0000000
--- a/include/asm-arm/arch-ks8695/regs-hpna.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - HPNA Registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_HPNA_H
-#define KS8695_HPNA_H
-
-#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
-#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
-#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
-
-
-/*
- * HPNA registers
- */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
deleted file mode 100644
index 70b193f..0000000
--- a/include/asm-arm/arch-ks8695/regs-irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-irq.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - IRQ registers and bit definitions
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_IRQ_H
-#define KS8695_IRQ_H
-
-#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
-#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
-#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
-
-
-/*
- * Interrupt Controller registers
- */
-#define KS8695_INTMC (0x00) /* Mode Control Register */
-#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
-#define KS8695_INTST (0x08) /* Interrupt Status Register */
-#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
-#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
-#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
-#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
-#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
-#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
-#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
-#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
-#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
-#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
-#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h
deleted file mode 100644
index a63bd61..0000000
--- a/include/asm-arm/arch-ks8695/regs-lan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-lan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - LAN Registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_LAN_H
-#define KS8695_LAN_H
-
-#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
-#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
-#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
-
-
-/*
- * LAN registers
- */
-#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
-#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
-#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
-#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
-#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
-#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
-#define KS8695_LMAL (0x18) /* MAC Station Address Low */
-#define KS8695_LMAH (0x1c) /* MAC Station Address High */
-#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
-#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
-#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
-#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
-#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
-#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
-#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
-#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
-#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
-#define LMDTXC_LMTE (1 << 0) /* TX Enable */
-
-/* DMA Receive Control Register */
-#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
-#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
-#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
-#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
-#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
-#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
-#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
-#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
-#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
-#define LMDRXC_LMRA (1 << 2) /* Receive All */
-#define LMDRXC_LMRE (1 << 1) /* RX Enable */
-
-/* Additional Station Address High */
-#define LMAAH_E (1 << 31) /* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
deleted file mode 100644
index 76b38e0..0000000
--- a/include/asm-arm/arch-ks8695/regs-mem.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-mem.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Memory Controller registers and bit definitions
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MEM_H
-#define KS8695_MEM_H
-
-#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
-#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
-#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
-
-
-/*
- * Memory Controller Registers
- */
-#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
-#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
-#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
-#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
-#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
-#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
-#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
-#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
-#define KS8695_SDGCON (0x38) /* SDRAM General Control */
-#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
-#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
-
-
-/* External I/O Access Control Registers */
-#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
-#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
-#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
-#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
-#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
-#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
-
-/* ROM/SRAM/Flash Control Register */
-#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
-#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
-#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
-#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
-#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
-#define PMC_NORMAL (0 << 0)
-#define PMC_4WORD (1 << 0)
-#define PMC_8WORD (2 << 0)
-#define PMC_16WORD (3 << 0)
-
-/* External I/O and ROM/SRAM/Flash General Register */
-#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
-#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
-#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
-#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
-#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
-#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
-
-/* SDRAM Control Register */
-#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
-#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
-#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
-#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
-#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
-
-/* SDRAM General Control Register */
-#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
-#define SDGCON_SDCAS (3 << 0) /* CAS latency */
-
-/* SDRAM Buffer Control Register */
-#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
-#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
-#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
-#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
-#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
-#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
-#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
-#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
-
-/* SDRAM Refresh Timer Register */
-#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h
deleted file mode 100644
index 632ca66..0000000
--- a/include/asm-arm/arch-ks8695/regs-misc.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-misc.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Miscellaneous Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MISC_H
-#define KS8695_MISC_H
-
-#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
-#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
-#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
-
-
-/*
- * Miscellaneous registers
- */
-#define KS8695_DID (0x00) /* Device ID */
-#define KS8695_RID (0x04) /* Revision ID */
-#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
-#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
-#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
-#define KS8695_PPS (0x1c) /* PHY PowerSave */
-
-/* Device ID Register */
-#define DID_ID (0xffff << 0) /* Device ID */
-
-/* Revision ID Register */
-#define RID_SUBID (0xf << 4) /* Sub-Device ID */
-#define RID_REVISION (0xf << 0) /* Revision ID */
-
-/* HPNA Miscellaneous Control Register */
-#define HMC_HSS (1 << 1) /* Speed */
-#define HMC_HDS (1 << 0) /* Duplex */
-
-/* WAN Miscellaneous Control Register */
-#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
-#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
-#define WMC_WANAP (1 << 28) /* Advertise Pause */
-#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
-#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
-#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
-#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
-#define WMC_WLS (1 << 23) /* Link status */
-#define WMC_WDS (1 << 22) /* Duplex status */
-#define WMC_WSS (1 << 21) /* Speed status */
-#define WMC_WLPP (1 << 20) /* Link Partner Pause */
-#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
-#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
-#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
-#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
-#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
-#define WMC_WANF100 (1 << 14) /* Force 100 */
-#define WMC_WANFF (1 << 13) /* Force FDX */
-#define WMC_WLED1S (7 << 4) /* LED1 Select */
-#define WLED1S_SPEED (0 << 4)
-#define WLED1S_LINK (1 << 4)
-#define WLED1S_DUPLEX (2 << 4)
-#define WLED1S_COLLISION (3 << 4)
-#define WLED1S_ACTIVITY (4 << 4)
-#define WLED1S_FDX_COLLISION (5 << 4)
-#define WLED1S_LINK_ACTIVITY (6 << 4)
-#define WMC_WLED0S (7 << 0) /* LED0 Select */
-#define WLED0S_SPEED (0 << 0)
-#define WLED0S_LINK (1 << 0)
-#define WLED0S_DUPLEX (2 << 0)
-#define WLED0S_COLLISION (3 << 0)
-#define WLED0S_ACTIVITY (4 << 0)
-#define WLED0S_FDX_COLLISION (5 << 0)
-#define WLED0S_LINK_ACTIVITY (6 << 0)
-
-/* WAN PHY Power Management Register */
-#define WPPM_WLPBK (1 << 14) /* Local Loopback */
-#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
-#define WPPM_WPI (1 << 12) /* PHY isolate */
-#define WPPM_WFL (1 << 10) /* Force link */
-#define WPPM_MDIXS (1 << 9) /* MDIX Status */
-#define WPPM_FEF (1 << 8) /* Far End Fault */
-#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
-#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
-#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
-#define WPPM_PD (1 << 4) /* Power Down */
-#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
-#define WPPM_FMDX (1 << 2) /* Force MDIX */
-#define WPPM_LPBK (1 << 1) /* MAX Loopback */
-
-/* PHY Power Save Register */
-#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h
deleted file mode 100644
index 286d6d4..0000000
--- a/include/asm-arm/arch-ks8695/regs-pci.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-pci.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - PCI bridge registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
-#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
-#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
-
-
-#define KS8695_CRCFID (0x000) /* Configuration: Identification */
-#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
-#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
-#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
-#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
-#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
-#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
-#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
-#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
-#define KS8695_PBM (0x200) /* Bridge Mode */
-#define KS8695_PBCS (0x204) /* Bridge Control and Status */
-#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
-#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
-#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
-#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
-#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
-#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
-#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
-#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
-
-
-/* Configuration: Identification */
-
-/* Configuration: Command and Status */
-
-/* Configuration: Revision */
-
-
-
-#define CFRV_GUEST (1 << 23)
-
-#define PBCA_TYPE1 (1)
-#define PBCA_ENABLE (1 << 31)
-
-
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h
deleted file mode 100644
index 5f37be3..0000000
--- a/include/asm-arm/arch-ks8695/regs-switch.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-switch.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Switch Registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SWITCH_H
-#define KS8695_SWITCH_H
-
-#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
-#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
-#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
-
-
-/*
- * Switch registers
- */
-#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
-#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
-#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
-
-#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
-
-#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
-#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
-#define KS8695_SEIAC (0x50) /* Indirect Access Control */
-#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
-#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
-#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
-#define KS8695_SEAFC (0x60) /* Advance Feature Control */
-#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
-#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
-#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
-#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
-#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
-#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
-
-
-/* Switch Engine Control 0 */
-#define SEC0_LLED1S (7 << 25) /* LED1 Select */
-#define LLED1S_SPEED (0 << 25)
-#define LLED1S_LINK (1 << 25)
-#define LLED1S_DUPLEX (2 << 25)
-#define LLED1S_COLLISION (3 << 25)
-#define LLED1S_ACTIVITY (4 << 25)
-#define LLED1S_FDX_COLLISION (5 << 25)
-#define LLED1S_LINK_ACTIVITY (6 << 25)
-#define SEC0_LLED0S (7 << 22) /* LED0 Select */
-#define LLED0S_SPEED (0 << 22)
-#define LLED0S_LINK (1 << 22)
-#define LLED0S_DUPLEX (2 << 22)
-#define LLED0S_COLLISION (3 << 22)
-#define LLED0S_ACTIVITY (4 << 22)
-#define LLED0S_FDX_COLLISION (5 << 22)
-#define LLED0S_LINK_ACTIVITY (6 << 22)
-#define SEC0_ENABLE (1 << 0) /* Enable Switch */
-
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h
deleted file mode 100644
index f317981..0000000
--- a/include/asm-arm/arch-ks8695/regs-sys.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-sys.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - System control registers and bit definitions
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SYS_H
-#define KS8695_SYS_H
-
-#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
-#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
-#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
-
-
-#define KS8695_SYSCFG (0x00) /* System Configuration Register */
-#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
-
-
-/* System Configuration Register */
-#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
-
-/* System Clock and Bus Control Register */
-#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
-#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h
deleted file mode 100644
index 0a9f7f9..0000000
--- a/include/asm-arm/arch-ks8695/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
-#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON (0x00) /* Timer Control Register */
-#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
-#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
-#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
-#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
-#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h
deleted file mode 100644
index a27cb20..0000000
--- a/include/asm-arm/arch-ks8695/regs-uart.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/regs-uart.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - UART register and bit definitions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef KS8695_UART_H
-#define KS8695_UART_H
-
-#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
-#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
-#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
-
-
-/*
- * UART registers
- */
-#define KS8695_URRB (0x00) /* Receive Buffer Register */
-#define KS8695_URTH (0x04) /* Transmit Holding Register */
-#define KS8695_URFC (0x08) /* FIFO Control Register */
-#define KS8695_URLC (0x0C) /* Line Control Register */
-#define KS8695_URMC (0x10) /* Modem Control Register */
-#define KS8695_URLS (0x14) /* Line Status Register */
-#define KS8695_URMS (0x18) /* Modem Status Register */
-#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
-#define KS8695_USR (0x20) /* Status Register */
-
-
-/* FIFO Control Register */
-#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
-#define URFC_URFRT_1 (0 << 6)
-#define URFC_URFRT_4 (1 << 6)
-#define URFC_URFRT_8 (2 << 6)
-#define URFC_URFRT_14 (3 << 6)
-#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
-#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
-#define URFC_URFE (1 << 0) /* FIFO Enable */
-
-/* Line Control Register */
-#define URLC_URSBC (1 << 6) /* Set Break Condition */
-#define URLC_PARITY (7 << 3) /* Parity */
-#define URPE_NONE (0 << 3)
-#define URPE_ODD (1 << 3)
-#define URPE_EVEN (3 << 3)
-#define URPE_MARK (5 << 3)
-#define URPE_SPACE (7 << 3)
-#define URLC_URSB (1 << 2) /* Stop Bits */
-#define URLC_URCL (3 << 0) /* Character Length */
-#define URCL_5 (0 << 0)
-#define URCL_6 (1 << 0)
-#define URCL_7 (2 << 0)
-#define URCL_8 (3 << 0)
-
-/* Modem Control Register */
-#define URMC_URLB (1 << 4) /* Loop-back mode */
-#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
-#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
-#define URMC_URRTS (1 << 1) /* Request to Send */
-#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
-
-/* Line Status Register */
-#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
-#define URLS_URTE (1 << 6) /* Transmit Empty */
-#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
-#define URLS_URBI (1 << 4) /* Break Interrupt */
-#define URLS_URFE (1 << 3) /* Framing Error */
-#define URLS_URPE (1 << 2) /* Parity Error */
-#define URLS_URROE (1 << 1) /* Receive Overrun Error */
-#define URLS_URDR (1 << 0) /* Receive Data Ready */
-
-/* Modem Status Register */
-#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
-#define URMS_URRI (1 << 6) /* Ring Indicator */
-#define URMS_URDSR (1 << 5) /* Data Set Ready */
-#define URMS_URCTS (1 << 4) /* Clear to Send */
-#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
-#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
-#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
-
-/* Status Register */
-#define USR_UTI (1 << 0) /* Timeout Indication */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h
deleted file mode 100644
index 52e35b0..0000000
--- a/include/asm-arm/arch-ks8695/regs-wan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - WAN Registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_WAN_H
-#define KS8695_WAN_H
-
-#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
-#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
-#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
-
-
-/*
- * WAN registers
- */
-#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
-#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
-#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
-#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
-#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
-#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
-#define KS8695_WMAL (0x18) /* MAC Station Address Low */
-#define KS8695_WMAH (0x1c) /* MAC Station Address High */
-#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
-#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
-#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
-#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
-#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
-#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
-#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
-#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
-#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
-#define WMDTXC_WMTE (1 << 0) /* TX Enable */
-
-/* DMA Receive Control Register */
-#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
-#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
-#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
-#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
-#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
-#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
-#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
-#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
-#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
-#define WMDRXC_WMRA (1 << 2) /* Receive All */
-#define WMDRXC_WMRE (1 << 0) /* RX Enable */
-
-/* Additional Station Address High */
-#define WMAAH_E (1 << 31) /* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
deleted file mode 100644
index 3bc2810..0000000
--- a/include/asm-arm/arch-ks8695/system.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-timer.h>
-
-static void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks,
- */
- cpu_do_idle();
-
-}
-
-static void arch_reset(char mode)
-{
- unsigned int reg;
-
- if (mode == 's')
- cpu_reset(0);
-
- /* disable timer0 */
- reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
- /* enable watchdog mode */
- __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
- /* re-enable timer0 */
- __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
deleted file mode 100644
index 8320d52..0000000
--- a/include/asm-arm/arch-ks8695/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
deleted file mode 100644
index 733a508..0000000
--- a/include/asm-arm/arch-ks8695/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/uncompress.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Kernel uncompressor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-uart.h>
-
-static void putc(char c)
-{
- while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
- barrier();
-
- __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
-}
-
-static inline void flush(void)
-{
- while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
- barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
deleted file mode 100644
index d1d88e58..0000000
--- a/include/asm-arm/arch-ks8695/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
deleted file mode 100644
index 762cbc7..0000000
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 08-02-2000 SJH Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <asm/arch/hardware.h>
-
-#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR 0x00000000
-#define AUX_DIAG_LED_ON 0x00000002
-#define AUX_RTS_UART1 0x00000004
-#define AUX_DTR_UART1 0x00000008
-#define AUX_KBD_COLUMN_12_HIGH 0x00000010
-#define AUX_KBD_COLUMN_12_OFF 0x00000020
-#define AUX_KBD_COLUMN_13_HIGH 0x00000040
-#define AUX_KBD_COLUMN_13_OFF 0x00000080
-
-#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
deleted file mode 100644
index 8464733..0000000
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .equ io_virt, IO_BASE
- .equ io_phys, IO_START
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #io_phys @ physical base address
- movne \rx, #io_virt @ virtual address
- add \rx, \rx, #0x00044000 @ UART1
-@ add \rx, \rx, #0x00045000 @ UART2
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0] @ UARTDR
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
deleted file mode 100644
index 4c7eca6..0000000
--- a/include/asm-arm/arch-l7200/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 08-29-2000 SJH Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
-#define DMA_S0 0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
deleted file mode 100644
index d5e7294..0000000
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
- .equ irq_base_addr, IO_BASE_2
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqstat, #irq_base_addr @ Virt addr IRQ regs
- add \irqstat, \irqstat, #0x00001000 @ Status reg
- ldr \irqstat, [\irqstat, #0] @ get interrupts
- mov \irqnr, #0
-1001: tst \irqstat, #1
- addeq \irqnr, \irqnr, #1
- moveq \irqstat, \irqstat, lsr #1
- tsteq \irqnr, #32
- beq 1001b
- teq \irqnr, #32
- .endm
-
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
deleted file mode 100644
index 6f20962..0000000
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 07-28-2000 SJH Created file
- * 08-02-2000 SJH Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
- unsigned int TIMERLOAD;
- unsigned int TIMERVALUE;
- unsigned int TIMERCONTROL;
- unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE (IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define GPT_PRESCALE_1 0x00000000
-#define GPT_PRESCALE_16 0x00000004
-#define GPT_PRESCALE_256 0x00000008
-#define GPT_MODE_FREERUN 0x00000000
-#define GPT_MODE_PERIODIC 0x00000040
-#define GPT_ENABLE 0x00000080
-#define GPT_BZTOG 0x00000100
-#define GPT_BZMOD 0x00000200
-#define GPT_LOAD_MASK 0x0000ffff
-
-#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
deleted file mode 100644
index 0b63e42..0000000
--- a/include/asm-arm/arch-l7200/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- * linux/include/asm-arm/arch-l7200/gpio.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * GPIO.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF 0x000
-#define PADDR_OFF 0x004
-#define PASBSR_OFF 0x008
-#define PAEENR_OFF 0x00c
-#define PAESNR_OFF 0x010
-#define PAESTR_OFF 0x014
-#define PAIMR_OFF 0x018
-#define PAINT_OFF 0x01c
-
-#define PBDR_OFF 0x020
-#define PBDDR_OFF 0x024
-#define PBSBSR_OFF 0x028
-#define PBIMR_OFF 0x038
-#define PBINT_OFF 0x03c
-
-#define PCDR_OFF 0x040
-#define PCDDR_OFF 0x044
-#define PCSBSR_OFF 0x048
-#define PCIMR_OFF 0x058
-#define PCINT_OFF 0x05c
-
-#define PDDR_OFF 0x060
-#define PDDDR_OFF 0x064
-#define PDSBSR_OFF 0x068
-#define PDEENR_OFF 0x06c
-#define PDESNR_OFF 0x070
-#define PDESTR_OFF 0x074
-#define PDIMR_OFF 0x078
-#define PDINT_OFF 0x07c
-
-#define PEDR_OFF 0x080
-#define PEDDR_OFF 0x084
-#define PESBSR_OFF 0x088
-#define PEEENR_OFF 0x08c
-#define PEESNR_OFF 0x090
-#define PEESTR_OFF 0x094
-#define PEIMR_OFF 0x098
-#define PEINT_OFF 0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN 0x02
-#define BACKLIGHT_EN 0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
deleted file mode 100644
index 2ab43f3..0000000
--- a/include/asm-arm/arch-l7200/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- * 02-01-2000 RS Created L7200 version, derived from rpc code
- * 03-21-2000 SJH Cleaned up file
- * 04-21-2000 RS Changed mapping of I/O in virtual space
- * 04-25-2000 SJH Removed unused symbols and such
- * 05-05-2000 SJH Complete rewrite
- * 07-31-2000 SJH Added undocumented debug auxillary port to
- * get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-#define RAM_START 0xf0000000
-#define RAM_SIZE 0x02000000
-#define RAM_BASE 0xc0000000
-
-#define IO_START 0x80000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE 0xd0000000
-
-#define IO_START_2 0x90000000 /* I/O */
-#define IO_SIZE_2 0x01000000
-#define IO_BASE_2 0xd1000000
-
-#define AUX_START 0x1a000000 /* AUX PORT */
-#define AUX_SIZE 0x01000000
-#define AUX_BASE 0xd2000000
-
-#define FLASH1_START 0x00000000 /* FLASH BANK 1 */
-#define FLASH1_SIZE 0x01000000
-#define FLASH1_BASE 0xd3000000
-
-#define FLASH2_START 0x10000000 /* FLASH BANK 2 */
-#define FLASH2_SIZE 0x01000000
-#define FLASH2_BASE 0xd4000000
-
-#define ISA_START 0x20000000 /* ISA */
-#define ISA_SIZE 0x20000000
-#define ISA_BASE 0xe0000000
-
-#define PCIO_BASE IO_BASE
-
-#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
deleted file mode 100644
index e24a10a..0000000
--- a/include/asm-arm/arch-l7200/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 03-21-2000 SJH Created from linux/include/asm-arm/arch-nexuspci/io.h
- * 08-31-2000 SJH Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
deleted file mode 100644
index 7120c01..0000000
--- a/include/asm-arm/arch-l7200/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 01-02-2000 RS Create l7200 version
- * 03-28-2000 SJH Removed unused interrupt
- * 07-28-2000 SJH Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- * interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS 32
-
-#define IRQ_STWDOG 0 /* Watchdog timer */
-#define IRQ_PROG 1 /* Programmable interrupt */
-#define IRQ_DEBUG_RX 2 /* Comm Rx debug */
-#define IRQ_DEBUG_TX 3 /* Comm Tx debug */
-#define IRQ_GCTC1 4 /* Timer 1 */
-#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */
-#define IRQ_DMA 6 /* DMA controller */
-#define IRQ_CLCD 7 /* Color LCD controller */
-#define IRQ_SM_RX 8 /* Smart card */
-#define IRQ_SM_TX 9 /* Smart cart */
-#define IRQ_SM_RST 10 /* Smart card */
-#define IRQ_SIB 11 /* Serial Interface Bus */
-#define IRQ_MMC 12 /* MultiMediaCard */
-#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */
-#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */
-#define IRQ_SPI 15 /* SPI slave */
-#define IRQ_UART_1 16 /* UART 1 */
-#define IRQ_UART_2 17 /* UART 2 */
-#define IRQ_IRDA 18 /* IRDA */
-#define IRQ_RTC_TICK 19 /* Real Time Clock tick */
-#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */
-#define IRQ_GPIO 21 /* General Purpose IO */
-#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */
-#define IRQ_M2M 23 /* Memory to memory DMA */
-#define IRQ_RESERVED 24 /* RESERVED, don't use */
-#define IRQ_INTF 25 /* External active low interrupt */
-#define IRQ_INT0 26 /* External active low interrupt */
-#define IRQ_INT1 27 /* External active low interrupt */
-#define IRQ_INT2 28 /* External active low interrupt */
-#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO 30 /* Low batery or external power */
-#define IRQ_MEDIA_CHG 31 /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
deleted file mode 100644
index 402df63..0000000
--- a/include/asm-arm/arch-l7200/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- * 03-13-2000 SJH Created
- * 04-13-2000 RS Changed bus macros for new addr
- * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
deleted file mode 100644
index 730056c..0000000
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- * linux/include/asm-arm/arch-l7200/pmpcon.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * DC/DC converter register.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */
-#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST 0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H)
-
-/* PMPCON = 0x811; // too light and fuzzy
- * PMPCON = 0x844;
- * PMPCON = 0x866; // better color poor depth
- * PMPCON = 0x888; // Darker but better depth
- * PMPCON = 0x899; // Darker even better depth
- * PMPCON = 0x8aa; // too dark even better depth
- * PMPCON = 0X8cc; // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
deleted file mode 100644
index 57faea7..0000000
--- a/include/asm-arm/arch-l7200/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- * linux/include/asm-arm/arch-l7200/pmu.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * Power Management Unit (PMU).
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */
-#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
- unsigned int CURRENT; /* Current configuration register */
- unsigned int NEXT; /* Next configuration register */
- unsigned int reserved;
- unsigned int RUN; /* Run configuration register */
- unsigned int COMM; /* Configuration command register */
- unsigned int SDRAM; /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg) ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg) ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg) ((reg >> 8) & 0x01)
-#define GET_PLLMUX(reg) ((reg >> 7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01)
-#define GET_FASTBUS(reg) (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */
-#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01)
-#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL 1<<25
-#define CHANGE_NOSTALL 2<<25
-#define CHANGE_STALL 3<<25
-
-#define INTRET 1<<17
-#define OSCEN 1<<16
-#define OSCMUX 1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0 0<<9 /* 3.6864 MHz */
-#define PLLMUL_1 1<<9 /* ?????? MHz */
-#define PLLMUL_5 5<<9 /* 18.432 MHz */
-#define PLLMUL_10 10<<9 /* 36.864 MHz */
-#define PLLMUL_18 18<<9 /* ?????? MHz */
-#define PLLMUL_20 20<<9 /* 73.728 MHz */
-#define PLLMUL_32 32<<9 /* ?????? MHz */
-#define PLLMUL_35 35<<9 /* 129.024 MHz */
-#define PLLMUL_36 36<<9 /* ?????? MHz */
-#define PLLMUL_39 39<<9 /* ?????? MHz */
-#define PLLMUL_40 40<<9 /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1 1<<18
-#define CRCLOCK_2 2<<18
-#define CRCLOCK_4 4<<18
-#define CRCLOCK_8 8<<18
-#define CRCLOCK_16 16<<18
-#define CRCLOCK_32 32<<18
-#define CRCLOCK_63 63<<18
-#define CRCLOCK_127 127<<18
-
-#define PLLEN 1<<8
-#define PLLMUX 1<<7
-#define SDR_STOP 1<<6
-#define SYSCLKEN 1<<5
-
-#define BCLK_DIV_4 2<<3
-#define BCLK_DIV_2 1<<3
-#define BCLK_DIV_1 0<<3
-
-#define SDRB_SEL 1<<2
-#define SDRF_SEL 1<<1
-#define FASTBUS 1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK 1<<1 /* Read-only */
-#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK 1<<3 /* Read-only */
-#define PICEN 1<<4 /* Enable Co-procesor */
-#define PICTEST 1<<5
-
-#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
deleted file mode 100644
index defb8b7..0000000
--- a/include/asm-arm/arch-l7200/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 03-20-2000 SJH Created
- * 03-26-2000 SJH Added flags for serial ports
- * 03-27-2000 SJH Corrected BASE_BAUD value
- * 04-14-2000 RS Made register addr dependent on IO_BASE
- * 05-03-2000 SJH Complete rewrite
- * 05-09-2000 SJH Stripped out architecture specific serial stuff
- * and placed it in a separate file
- * 07-28-2000 SJH Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS \
- /* MAGIC UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \
- { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
deleted file mode 100644
index b1008a9..0000000
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 05-09-2000 SJH Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <asm/arch/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE (IO_BASE + 0x00044000)
-#define UART2_BASE (IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR 0x00 /* Tx/Rx data */
-#define RXSTAT 0x04 /* Rx status */
-#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
-#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
-#define UARTCON 0x14 /* control register */
-#define UARTFLG 0x18 /* flag register */
-#define UARTINTSTAT 0x1C /* FIFO IRQ status register */
-#define UARTINTMASK 0x20 /* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110 0x827
-#define BR_1200 0x06e
-#define BR_2400 0x05f
-#define BR_4800 0x02f
-#define BR_9600 0x017
-#define BR_14400 0x00f
-#define BR_19200 0x00b
-#define BR_38400 0x005
-#define BR_57600 0x003
-#define BR_76800 0x002
-#define BR_115200 0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR 0x00 /* No error */
-#define RXSTAT_FRM_ERR 0x01 /* Framing error */
-#define RXSTAT_PAR_ERR 0x02 /* Parity error */
-#define RXSTAT_OVR_ERR 0x04 /* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK 0x01 /* generate break on tx */
-#define UBRLCR_PEN 0x02 /* enable parity */
-#define UBRLCR_PDIS 0x00 /* disable parity */
-#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */
-#define UBRLCR_FIFO 0x10 /* enable FIFO */
-#define UBRLCR_LEN5 0x60 /* word length5 */
-#define UBRLCR_LEN6 0x40 /* word length6 */
-#define UBRLCR_LEN7 0x20 /* word length7 */
-#define UBRLCR_LEN8 0x00 /* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN 0x01 /* Enable UART */
-#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */
-#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */
-#define UARTFLG_UBUSY 0x08 /* Transmitter busy */
-#define UARTFLG_DCD 0x04 /* Data carrier detect */
-#define UARTFLG_DSR 0x02 /* Data set ready */
-#define UARTFLG_CTS 0x01 /* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT 0x01 /* TX interrupt */
-#define UART_RXINT 0x02 /* RX interrupt */
-#define UART_RXERRINT 0x04 /* RX error interrupt */
-#define UART_MSINT 0x08 /* Modem Status interrupt */
-#define UART_UDINT 0x10 /* UART Disabled interrupt */
-#define UART_ALLIRQS 0x1f /* All interrupts */
-
-#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
deleted file mode 100644
index bf4364e..0000000
--- a/include/asm-arm/arch-l7200/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- * linux/include/asm-arm/arch-l7200/sib.h
- *
- * Registers and helper functions for the Serial Interface Bus.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
- unsigned int MCCR; /* SIB Control Register Offset: 0x00 */
- unsigned int RES1; /* Reserved Offset: 0x04 */
- unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */
- unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */
- unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */
- unsigned int RES2; /* Reserved Offset: 0x14 */
- unsigned int MCSR; /* SIB Status Register Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ 9216000 /* Hertz */
-#define AUDIO_FREQ 5000 /* Hertz */
-#define TELECOM_FREQ 5000 /* Hertz */
-
-#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57 AUDIO_DIVIDE
-#define MCCR_TSD57 (TELECOM_DIVIDE << 8)
-#define MCCR_MCE (1 << 16) /* SIB enable */
-#define MCCR_ECS (1 << 17) /* External Clock Select */
-#define MCCR_ADM (1 << 18) /* A/D Data Sampling */
-#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */
-#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */
-#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE GET_CRC
-#define MCDR2_READ (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
deleted file mode 100644
index 771c774..0000000
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- * linux/include/asm-arm/arch-l7200/sys-clock.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * System clocks.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
-#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
- unsigned int ENABLE;
- unsigned int ESYNC;
- unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN 1<<0
-#define B18M_EN 1<<1
-#define CLK3M6_EN 1<<2
-#define BUART_EN 1<<3
-#define CLK18MU_EN 1<<4
-#define FIR_EN 1<<5
-#define MIRN_EN 1<<6
-#define UARTM_EN 1<<7
-#define SIBADC_EN 1<<8
-#define ALTD_EN 1<<9
-#define CLCLK_EN 1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV 1<<0
-#define MIR_SEL 1<<1
-#define SSP_SEL 1<<4
-#define MM_DIV 1<<5
-#define MM_SEL 1<<6
-#define ADC_SEL_2 0<<7
-#define ADC_SEL_4 1<<7
-#define ADC_SEL_8 3<<7
-#define ADC_SEL_16 7<<7
-#define ADC_SEL_32 0x0f<<7
-#define ADC_SEL_64 0x1f<<7
-#define ADC_SEL_128 0x3f<<7
-#define ALTD_SEL 1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
deleted file mode 100644
index efef950..0000000
--- a/include/asm-arm/arch-l7200/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- * 03-21-2000 SJH Created
- * 04-26-2000 SJH Fixed functions
- * 05-03-2000 SJH Removed usage of obsolete 'iomd.h'
- * 05-31-2000 SJH Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
- *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
-}
-
-static inline void arch_reset(char mode)
-{
- if (mode == 's') {
- cpu_reset(0);
- }
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
deleted file mode 100644
index ea22f7f..0000000
--- a/include/asm-arm/arch-l7200/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 01-02-2000 RS Created l7200 version, derived from rpc code
- * 05-03-2000 SJH Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <asm/arch/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE (IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32 0x00 /* 32 Hz tick */
-#define RTC_RATE_64 0x10 /* 64 Hz tick */
-#define RTC_RATE_128 0x20 /* 128 Hz tick */
-#define RTC_RATE_256 0x30 /* 256 Hz tick */
-#define RTC_EN_ALARM 0x01 /* Enable alarm */
-#define RTC_EN_TIC 0x04 /* Enable counter */
-#define RTC_EN_STWDOG 0x08 /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
-#endif
- do_profile(regs);
- RTC_RTCC = 0; /* Clear interrupt */
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
- RTC_RTCC = 0; /* Clear interrupt */
-
- timer_irq.handler = timer_interrupt;
-
- setup_irq(IRQ_RTC_TICK, &timer_irq);
-
- RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
deleted file mode 100644
index 3c32026..0000000
--- a/include/asm-arm/arch-l7200/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000 RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- * must be changed when choosing a different tick
- * rate. The value of HZ in 'param.h' must also
- * be changed to match below.
- */
-#define CLOCK_TICK_RATE 128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
deleted file mode 100644
index c5ba0ad..0000000
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 05-01-2000 SJH Created
- * 05-13-2000 SJH Filled in function bodies
- * 07-26-2000 SJH Removed hard coded baud rate
- */
-
-#include <asm/arch/hardware.h>
-
-#define IO_UART IO_START + 0x00044000
-
-#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p) (*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
- while(__raw_readb(IO_UART + 0x18) & 0x20 ||
- __raw_readb(IO_UART + 0x18) & 0x08)
- barrier();
-
- __raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
- __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */
- __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */
- __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
deleted file mode 100644
index 816231e..0000000
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h
deleted file mode 100644
index 7d0ba18..0000000
--- a/include/asm-arm/arch-lh7a40x/clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/clocks.h
- *
- * Copyright (C) 2004 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CLOCKS_H
-#define __ASM_ARCH_CLOCKS_H
-
-unsigned int fclkfreq_get (void);
-unsigned int hclkfreq_get (void);
-unsigned int pclkfreq_get (void);
-
-#endif /* _ASM_ARCH_CLOCKS_H */
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h
deleted file mode 100644
index 51de96e..0000000
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/constants.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CONSTANTS_H
-#define __ASM_ARCH_CONSTANTS_H
-
-
-/* Addressing constants */
-
- /* SoC CPU IO addressing */
-#define IO_PHYS (0x80000000)
-#define IO_VIRT (0xf8000000)
-#define IO_SIZE (0x0000B000)
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_PHYS (0x20000000)
-# define CPLD_VIRT (0xf2000000)
-# define CPLD_SIZE PAGE_SIZE
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */
-# define IOBARRIER_VIRT 0xf0000000
-# define IOBARRIER_SIZE PAGE_SIZE
-
-# define CF_PHYS 0x60200000
-# define CF_VIRT 0xf6020000
-# define CF_SIZE (8*1024)
-
- /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */
-# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20))
-# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16))
-# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */
-# define CPLD00_VIRT CPLDX_VIRT (0x00)
-# define CPLD00_SIZE PAGE_SIZE
-# define CPLD02_PHYS CPLDX_PHYS (0x02)
-# define CPLD02_VIRT CPLDX_VIRT (0x02)
-# define CPLD02_SIZE PAGE_SIZE
-# define CPLD06_PHYS CPLDX_PHYS (0x06)
-# define CPLD06_VIRT CPLDX_VIRT (0x06)
-# define CPLD06_SIZE PAGE_SIZE
-# define CPLD08_PHYS CPLDX_PHYS (0x08)
-# define CPLD08_VIRT CPLDX_VIRT (0x08)
-# define CPLD08_SIZE PAGE_SIZE
-# define CPLD0A_PHYS CPLDX_PHYS (0x0a)
-# define CPLD0A_VIRT CPLDX_VIRT (0x0a)
-# define CPLD0A_SIZE PAGE_SIZE
-# define CPLD0C_PHYS CPLDX_PHYS (0x0c)
-# define CPLD0C_VIRT CPLDX_VIRT (0x0c)
-# define CPLD0C_SIZE PAGE_SIZE
-# define CPLD0E_PHYS CPLDX_PHYS (0x0e)
-# define CPLD0E_VIRT CPLDX_VIRT (0x0e)
-# define CPLD0E_SIZE PAGE_SIZE
-# define CPLD10_PHYS CPLDX_PHYS (0x10)
-# define CPLD10_VIRT CPLDX_VIRT (0x10)
-# define CPLD10_SIZE PAGE_SIZE
-# define CPLD12_PHYS CPLDX_PHYS (0x12)
-# define CPLD12_VIRT CPLDX_VIRT (0x12)
-# define CPLD12_SIZE PAGE_SIZE
-# define CPLD14_PHYS CPLDX_PHYS (0x14)
-# define CPLD14_VIRT CPLDX_VIRT (0x14)
-# define CPLD14_SIZE PAGE_SIZE
-# define CPLD16_PHYS CPLDX_PHYS (0x16)
-# define CPLD16_VIRT CPLDX_VIRT (0x16)
-# define CPLD16_SIZE PAGE_SIZE
-# define CPLD18_PHYS CPLDX_PHYS (0x18)
-# define CPLD18_VIRT CPLDX_VIRT (0x18)
-# define CPLD18_SIZE PAGE_SIZE
-# define CPLD1A_PHYS CPLDX_PHYS (0x1a)
-# define CPLD1A_VIRT CPLDX_VIRT (0x1a)
-# define CPLD1A_SIZE PAGE_SIZE
-#endif
-
- /* Timing constants */
-
-#define XTAL_IN 14745600 /* 14.7456 MHz crystal */
-#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */
-#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */
-#define HCLK (99993600)
-//#define HCLK (119808000)
-
-#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S
deleted file mode 100644
index 421dcd6..0000000
--- a/include/asm-arm/arch-lh7a40x/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- @ It is not known if this will be appropriate for every 40x
- @ board.
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- mov \rx, #0x00000700 @ offset from base
- orreq \rx, \rx, #0x80000000 @ physical base
- orrne \rx, \rx, #0xf8000000 @ virtual base
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx] @ DATA
- .endm
-
- .macro busyuart,rd,rx @ spin while busy
-1001: ldr \rd, [\rx, #0x10] @ STATUS
- tst \rd, #1 << 3 @ BUSY (TX FIFO not empty)
- bne 1001b @ yes, spin
- .endm
-
- .macro waituart,rd,rx @ wait for Tx FIFO room
-1001: ldrb \rd, [\rx, #0x10] @ STATUS
- tst \rd, #1 << 5 @ TXFF (TX FIFO full)
- bne 1001b @ yes, spin
- .endm
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
deleted file mode 100644
index a8cbd14..0000000
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/dma.h
- *
- * Copyright (C) 2005 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
- DMA_M2M0 = 0,
- DMA_M2M1 = 1,
- DMA_M2P0 = 2, /* Tx */
- DMA_M2P1 = 3, /* Rx */
- DMA_M2P2 = 4, /* Tx */
- DMA_M2P3 = 5, /* Rx */
- DMA_M2P4 = 6, /* Tx - AC97 */
- DMA_M2P5 = 7, /* Rx - AC97 */
- DMA_M2P6 = 8, /* Tx */
- DMA_M2P7 = 9, /* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1 (1<<11)
-#define DMAC_GIR_MMI0 (1<<10)
-#define DMAC_GIR_MPI8 (1<<9)
-#define DMAC_GIR_MPI9 (1<<8)
-#define DMAC_GIR_MPI6 (1<<7)
-#define DMAC_GIR_MPI7 (1<<6)
-#define DMAC_GIR_MPI4 (1<<5)
-#define DMAC_GIR_MPI5 (1<<4)
-#define DMAC_GIR_MPI2 (1<<3)
-#define DMAC_GIR_MPI3 (1<<2)
-#define DMAC_GIR_MPI0 (1<<1)
-#define DMAC_GIR_MPI1 (1<<0)
-
-#define DMAC_M2P0 0x0000
-#define DMAC_M2P1 0x0040
-#define DMAC_M2P2 0x0080
-#define DMAC_M2P3 0x00c0
-#define DMAC_M2P4 0x0240
-#define DMAC_M2P5 0x0200
-#define DMAC_M2P6 0x02c0
-#define DMAC_M2P7 0x0280
-#define DMAC_M2P8 0x0340
-#define DMAC_M2P9 0x0300
-#define DMAC_M2M0 0x0100
-#define DMAC_M2M1 0x0140
-
-#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE (1<<4)
-
-#define DMAC_PORT_USB 0
-#define DMAC_PORT_SDMMC 1
-#define DMAC_PORT_AC97_1 2
-#define DMAC_PORT_AC97_2 3
-#define DMAC_PORT_AC97_3 4
-#define DMAC_PORT_UART1 6
-#define DMAC_PORT_UART2 7
-#define DMAC_PORT_UART3 8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT 4
-#define DMAC_PSTATUS_CURRSTATE_MASK 0x3
-
-#define DMAC_PSTATUS_NEXTBUF (1<<6)
-#define DMAC_PSTATUS_STALLRINT (1<<0)
-
-#define DMAC_INT_CHE (1<<3)
-#define DMAC_INT_NFB (1<<1)
-#define DMAC_INT_STALL (1<<0)
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
deleted file mode 100644
index 34468e0..0000000
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * include/asm-arm/arch-lh7a40x/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
-/* In order to allow there to be support for both of the processor
- classes at the same time, we make a hack here that isn't very
- pretty. At startup, the link pointed to with the
- branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
- detected as a lh7a404.
-
- *** FIXME: we should clean this up so that there is only one
- implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
- mov \irqnr, #0 @ VIC1 irq base
- mov \base, #io_p2v(0x80000000) @ APB registers
- add \base, \base, #0x8000
- ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
- ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
- bne 1001f
- add \base, \base, #(0xa000 - 0x8000)
- ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
- mov \irqnr, #32 @ VIC2 irq base
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
-1008: movs \irqstat, #1 @ Force !Z
- str \tmp, [\base, #0x0030] @ Clear vector
- b 1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000: mov \irqnr, #0
- mov \base, #io_p2v(0x80000000) @ APB registers
- ldr \irqstat, [\base, #0x500] @ PIC INTSR
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1008: movs \irqstat, #1 @ Force !Z
-
-1009:
- .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqnr, #0
- mov \base, #io_p2v(0x80000000) @ APB registers
- ldr \irqstat, [\base, #0x500] @ PIC INTSR
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1008: movs \irqstat, #1 @ Force !Z
-1009:
- .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqnr, #0 @ VIC1 irq base
- mov \base, #io_p2v(0x80000000) @ APB registers
- add \base, \base, #0x8000
- ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
- ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
- bne 1001f
- add \base, \base, #(0xa000 - 0x8000)
- ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
- mov \irqnr, #32 @ VIC2 irq base
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
-1008: movs \irqstat, #1 @ Force !Z
- str \tmp, [\base, #0x0030] @ Clear vector
-1009:
- .endm
-#endif
-
-
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
deleted file mode 100644
index e9ff74f..0000000
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/hardware.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h> /* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-#else
-
-# if 0
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above, except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers. It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x) __REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x) __REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x) __REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x) (io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
deleted file mode 100644
index 8d591d0..0000000
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/io.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
deleted file mode 100644
index afe8c7c..0000000
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irqs.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board. For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START 80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
- /* FIQs */
-
-# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT 1 /* Battery Low */
-# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */
-# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */
-
- /* IRQs */
-
-# define IRQ_CSINT 4 /* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI 8 /* Timer 1 underflow */
-# define IRQ_T2UI 9 /* Timer 2 underflow */
-# define IRQ_RTCMI 10
-# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR 12
-# define IRQ_UART2INTR 13
-# define IRQ_LCDINTR 14
-# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR 16
-# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */
-# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */
-# define IRQ_USBINTR 20
-# define IRQ_DMAINTR 21
-# define IRQ_T3UI 22 /* Timer 3 underflow */
-# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */
-
- /* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i) ((i) \
- - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN 0 /* Brownout */
-# define IRQ_WDTINTR 1 /* Watchdog Timer */
-# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */
-# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */
-# define IRQ_T1UI 4 /* Timer 1 underflow */
-# define IRQ_T2UI 5 /* Timer 2 underflow */
-# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1 8
-# define IRQ_DMAM2P2 9
-# define IRQ_DMAM2P3 10
-# define IRQ_DMAM2P4 11
-# define IRQ_DMAM2P5 12
-# define IRQ_DMAM2P6 13
-# define IRQ_DMAM2P7 14
-# define IRQ_DMAM2P8 15
-# define IRQ_DMAM2P9 16
-# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1 18
-# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR 20
-# define IRQ_GPIO2INTR 21
-# define IRQ_GPIO3INTR 22
-# define IRQ_SOFT_V1_23 23 /* -- Unassigned */
-# define IRQ_SOFT_V1_24 24
-# define IRQ_SOFT_V1_25 25
-# define IRQ_SOFT_V1_26 26
-# define IRQ_SOFT_V1_27 27
-# define IRQ_SOFT_V1_28 28
-# define IRQ_SOFT_V1_29 29
-# define IRQ_SOFT_V1_30 30
-# define IRQ_SOFT_V1_31 31
-
-# define IRQ_BLINT 32 /* Battery Low */
-# define IRQ_BMIINTR 33 /* Battery Monitor */
-# define IRQ_MCINTR 34 /* Media Change */
-# define IRQ_TINTR 35 /* 64Hz Tick */
-# define IRQ_WEINT 36 /* Watchdog Expired */
-# define IRQ_RTCMI 37 /* Real-time Clock Match */
-# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR 39 /* UART1 Error */
-# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR 41 /* UART2 Error */
-# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR 43 /* UART3 Error */
-# define IRQ_SCIINTR 44 /* Smart Card */
-# define IRQ_TSCINTR 45 /* Touchscreen */
-# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR 48
-# define IRQ_GPIO6INTR 49
-# define IRQ_GPIO7INTR 50
-# define IRQ_T3UI 51 /* Timer 3 underflow */
-# define IRQ_LCDINTR 52 /* LCD Controller */
-# define IRQ_SSPINTR 53 /* Synchronous Serial Port */
-# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */
-# define IRQ_USBINTR 55 /* USB Device Port */
-# define IRQ_USHINTR 56 /* USB Host Port */
-# define IRQ_SOFT_V2_25 57 /* -- Unassigned */
-# define IRQ_SOFT_V2_26 58
-# define IRQ_SOFT_V2_27 59
-# define IRQ_SOFT_V2_28 60
-# define IRQ_SOFT_V2_29 61
-# define IRQ_SOFT_V2_30 62
-# define IRQ_SOFT_V2_31 63
-
-# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */
-
- /* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i) ((i) \
- - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- - IRQ_GPIO0INTR)
-
- /* Vector Address constants */
-# define VA_VECTORED 0x100 /* Set for vectored interrupt */
-# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */
-
-#endif
-
- /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK IRQ_TINTR
-#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */
-#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */
-#define IRQ_USB IRQ_USBINTR /* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */
-# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */
-# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */
-# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */
-#endif
-
- /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD IRQ_BOARD_START
-# define NR_IRQ_BOARD 5
-# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */
-# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */
-# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START
-# define NR_IRQ_BOARD 2
-# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */
-# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
deleted file mode 100644
index 9b0c801..0000000
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/memory.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- *
- * Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define KVADDR_TO_NID(addr) \
- ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\
- | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else /* 2 banks per node */
-# define KVADDR_TO_NID(addr) \
- (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define PFN_TO_NID(pfn) \
- (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else /* 2 banks per node */
-# define PFN_TO_NID(pfn) \
- (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else /* 2 banks per node */
-# define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
deleted file mode 100644
index b4f09b3..0000000
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/registers.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#ifndef __ASM_ARCH_REGISTERS_H
-#define __ASM_ARCH_REGISTERS_H
-
-
- /* Physical register base addresses */
-
-#define AC97C_PHYS (0x80000000) /* AC97 Controller */
-#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */
-#define USB_PHYS (0x80000200) /* USB Client */
-#define SCI_PHYS (0x80000300) /* Secure Card Interface */
-#define CSC_PHYS (0x80000400) /* Clock/State Controller */
-#define INTC_PHYS (0x80000500) /* Interrupt Controller */
-#define UART1_PHYS (0x80000600) /* UART1 Controller */
-#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */
-#define UART2_PHYS (0x80000700) /* UART2 Controller */
-#define UART3_PHYS (0x80000800) /* UART3 Controller */
-#define DCDC_PHYS (0x80000900) /* DC to DC Controller */
-#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */
-#define SSP_PHYS (0x80000b00) /* Synchronous ... */
-#define TIMER_PHYS (0x80000c00) /* Timer Controller */
-#define RTC_PHYS (0x80000d00) /* Real-time Clock */
-#define GPIO_PHYS (0x80000e00) /* General Purpose IO */
-#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */
-#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */
-#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */
-#define WDT_PHYS (0x80001400) /* Watchdog Timer */
-#define SMC_PHYS (0x80002000) /* Static Memory Controller */
-#define SDRC_PHYS (0x80002400) /* SDRAM Controller */
-#define DMAC_PHYS (0x80002800) /* DMA Controller */
-#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */
-
- /* Physical registers of the LH7A404 */
-
-#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */
-#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */
-#define USBH_PHYS (0x80009000) /* USB OHCI host controller */
-#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */
-
-/*#define KBD_PHYS (0x80000e00) */
-/*#define LCDICP_PHYS (0x80001000) */
-
-
- /* Clock/State Controller register */
-
-#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */
-#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */
-#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */
-#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */
-
-#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */
-#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27)
-#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26)
-#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25)
-#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24)
-#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23)
-#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22)
-#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21)
-#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20)
-#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19)
-#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18)
-#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17)
-#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16)
-
-#define CSC_PWRSR_CHIPMAN_SHIFT (24)
-#define CSC_PWRSR_CHIPMAN_MASK (0xff)
-#define CSC_PWRSR_CHIPID_SHIFT (16)
-#define CSC_PWRSR_CHIPID_MASK (0xff)
-
-#define CSC_USBDRESET_APBRESETREG (1<<1)
-#define CSC_USBDRESET_IORESETREG (1<<0)
-
- /* Interrupt Controller registers */
-
-#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */
-#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */
-#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */
-#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */
-
-
- /* Vectored Interrupted Controller registers */
-
-#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00)
-#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04)
-#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08)
-#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c)
-#define VIC1_INTEN __REG(VIC1_PHYS + 0x10)
-#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14)
-#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18)
-#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c)
-#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20)
-#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30)
-#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34)
-#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100)
-#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200)
-#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00)
-#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04)
-#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08)
-#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c)
-#define VIC2_INTEN __REG(VIC2_PHYS + 0x10)
-#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14)
-#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18)
-#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c)
-#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20)
-#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30)
-#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34)
-#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100)
-#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200)
-
-#define VIC_CNTL_ENABLE (0x20)
-
- /* USB Host registers (Open HCI compatible) */
-
-#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08)
-
-
- /* GPIO registers */
-
-#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */
-#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */
-#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */
-#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */
-#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */
-#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c)
-#define GPIO_PADD __REG(GPIO_PHYS + 0x10)
-#define GPIO_PAD __REG(GPIO_PHYS + 0x00)
-#define GPIO_PCD __REG(GPIO_PHYS + 0x08)
-#define GPIO_PCDD __REG(GPIO_PHYS + 0x18)
-#define GPIO_PEDD __REG(GPIO_PHYS + 0x24)
-#define GPIO_PED __REG(GPIO_PHYS + 0x20)
-
-
- /* Static Memory Controller registers */
-
-#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */
-#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */
-#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */
-#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */
-#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */
-#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */
-
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */
-# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */
-# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
-# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
-# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
-# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */
-# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08)
-# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08)
-# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a)
-# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a)
-# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c)
-# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
-
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define CPLD_CONTROL __REG16(CPLD02_PHYS)
-# define CPLD_SPI_DATA __REG16(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS)
-# define CPLD_FLASH __REG16(CPLD10_PHYS)
-# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS)
-# define CPLD_REVISION __REG16(CPLD14_PHYS)
-# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS)
-# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS)
-# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS)
-
-#endif
-
- /* Timer registers */
-
-#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
-#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
-#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
-#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
-
-#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
-#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
-#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
-#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
-
-#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
-
-#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
-#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
-#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
-#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
-
-#define TIMER_C_ENABLE (1<<7)
-#define TIMER_C_PERIODIC (1<<6)
-#define TIMER_C_FREERUNNING (0)
-#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */
-#define TIMER_C_508KHZ (0x08)
-
- /* GPIO registers */
-
-#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */
-#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */
-#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */
-#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */
-#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */
-#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */
-#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */
-
-
-#endif /* _ASM_ARCH_REGISTERS_H */
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h
deleted file mode 100644
index e1df8aa..0000000
--- a/include/asm-arm/arch-lh7a40x/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/system.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
- cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode)
-{
- cpu_reset (0);
-}
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h
deleted file mode 100644
index fa726b6..0000000
--- a/include/asm-arm/arch-lh7a40x/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/timex.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#define CLOCK_TICK_RATE (PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE 3686400
-*/
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
deleted file mode 100644
index 3d1ce04..0000000
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/uncompress.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA (0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS (0x10)
-#endif
-#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */
-
- /* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
- while (UART_STATUS & nTxRdy)
- barrier();
- UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
- /* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h
deleted file mode 100644
index 8163e45..0000000
--- a/include/asm-arm/arch-lh7a40x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/vmalloc.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END (0xe8000000)
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
deleted file mode 100644
index 585502e..0000000
--- a/include/asm-arm/arch-loki/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-loki/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/loki.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =LOKI_REGS_PHYS_BASE
- ldrne \rx, =LOKI_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h
deleted file mode 100644
index 40a8c17..0000000
--- a/include/asm-arm/arch-loki/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
deleted file mode 100644
index 693257c..0000000
--- a/include/asm-arm/arch-loki/entry-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-loki/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/loki.h>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #IRQ_CAUSE_OFF]
- ldr \tmp, [\base, #IRQ_MASK_OFF]
- mov \irqnr, #0
- ands \irqstat, \irqstat, \tmp
- clzne \irqnr, \irqstat
- rsbne \irqnr, \irqnr, #31
- .endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
deleted file mode 100644
index f65b01c..0000000
--- a/include/asm-arm/arch-loki/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * include/asm-arm/arch-loki/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
deleted file mode 100644
index e7418a9..0000000
--- a/include/asm-arm/arch-loki/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-loki/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
- + LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
deleted file mode 100644
index 7e49714..0000000
--- a/include/asm-arm/arch-loki/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-loki/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h" /* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL 0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL 1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL 2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL 3
-#define IRQ_LOKI_COM_A_ERR 6
-#define IRQ_LOKI_COM_A_IN 7
-#define IRQ_LOKI_COM_A_OUT 8
-#define IRQ_LOKI_COM_B_ERR 9
-#define IRQ_LOKI_COM_B_IN 10
-#define IRQ_LOKI_COM_B_OUT 11
-#define IRQ_LOKI_DMA_A 12
-#define IRQ_LOKI_DMA_B 13
-#define IRQ_LOKI_SAS_A 14
-#define IRQ_LOKI_SAS_B 15
-#define IRQ_LOKI_DDR 16
-#define IRQ_LOKI_XOR 17
-#define IRQ_LOKI_BRIDGE 18
-#define IRQ_LOKI_PCIE_A_ERR 20
-#define IRQ_LOKI_PCIE_A_INT 21
-#define IRQ_LOKI_PCIE_B_ERR 22
-#define IRQ_LOKI_PCIE_B_INT 23
-#define IRQ_LOKI_GBE_A_INT 24
-#define IRQ_LOKI_GBE_B_INT 25
-#define IRQ_LOKI_DEV_ERR 26
-#define IRQ_LOKI_UART0 27
-#define IRQ_LOKI_UART1 28
-#define IRQ_LOKI_TWSI 29
-#define IRQ_LOKI_GPIO_23_0 30
-#define IRQ_LOKI_GPIO_25_24 31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START 32
-#define NR_GPIO_IRQS GPIO_MAX
-
-#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h
deleted file mode 100644
index 5dd05ee..0000000
--- a/include/asm-arm/arch-loki/loki.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-loki/loki.h
- *
- * Generic definitions for Marvell Loki (88RC8480) SoC flavors
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_LOKI_H
-#define __ASM_ARCH_LOKI_H
-
-/*
- * Marvell Loki (88RC8480) address maps.
- *
- * phys
- * d0000000 on-chip peripheral registers
- * e0000000 PCIe 0 Memory space
- * e8000000 PCIe 1 Memory space
- * f0000000 PCIe 0 I/O space
- * f0100000 PCIe 1 I/O space
- *
- * virt phys size
- * fed00000 d0000000 1M on-chip peripheral registers
- * fee00000 f0000000 64K PCIe 0 I/O space
- * fef00000 f0100000 64K PCIe 1 I/O space
- */
-
-#define LOKI_REGS_PHYS_BASE 0xd0000000
-#define LOKI_REGS_VIRT_BASE 0xfed00000
-#define LOKI_REGS_SIZE SZ_1M
-
-#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000
-#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000
-#define LOKI_PCIE0_IO_BUS_BASE 0x00000000
-#define LOKI_PCIE0_IO_SIZE SZ_64K
-
-#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000
-#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000
-#define LOKI_PCIE1_IO_BUS_BASE 0x00000000
-#define LOKI_PCIE1_IO_SIZE SZ_64K
-
-#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000
-#define LOKI_PCIE0_MEM_SIZE SZ_128M
-
-#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define LOKI_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR 0x0004
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF 0x0000
-#define IRQ_MASK_OFF 0x0004
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
-
-#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000)
-
-#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000)
-
-#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000)
-
-#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000)
-#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000)
-
-#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000)
-#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000)
-
-#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000)
-#define DDR_REG(x) (DDR_VIRT_BASE | (x))
-
-
-#define GPIO_MAX 8
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
deleted file mode 100644
index 835101e..0000000
--- a/include/asm-arm/arch-loki/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-loki/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
deleted file mode 100644
index a3568ac..0000000
--- a/include/asm-arm/arch-loki/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-loki/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/loki.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
deleted file mode 100644
index 940014f..0000000
--- a/include/asm-arm/arch-loki/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-loki/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
-#define LOKI_TCLK 180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
deleted file mode 100644
index 89a0cf8..0000000
--- a/include/asm-arm/arch-loki/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-loki/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/loki.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
deleted file mode 100644
index f5be062..0000000
--- a/include/asm-arm/arch-loki/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-loki/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
deleted file mode 100644
index 763051f..0000000
--- a/include/asm-arm/arch-msm/board.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/include/asm-arm/arch-msm/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-
-/* platform device data structures */
-
-struct msm_mddi_platform_data
-{
- void (*panel_power)(int on);
- unsigned has_vsync_irq:1;
-};
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-
-#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
deleted file mode 100644
index e131b44..0000000
--- a/include/asm-arm/arch-msm/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* include/asm-arm/arch-msm7200/debug-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/msm_iomap.h>
-
- .macro addruart,rx
- @ see if the MMU is enabled and select appropriate base address
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, =MSM_UART1_PHYS
- ldrne \rx, =MSM_UART1_BASE
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0C]
- .endm
-
- .macro waituart,rd,rx
- @ wait for TX_READY
-1: ldr \rd, [\rx, #0x08]
- tst \rd, #0x04
- beq 1b
- .endm
-
- .macro busyuart,rd,rx
- .endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
deleted file mode 100644
index e4b565b..0000000
--- a/include/asm-arm/arch-msm/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-#include <asm/arch/msm_iomap.h>
-
-struct msm_dmov_cmd {
- struct list_head list;
- unsigned int cmdptr;
- void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */
-};
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
-
-
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
-
-#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch)
-#define DMOV_CMD_LIST (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
-
-#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch)
-#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR (1 << 3)
-#define DMOV_RSLT_FLUSH (1 << 2)
-#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
-#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
-
-#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch)
-
-#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch)
-#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
-
-#define DMOV_ISR DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch)
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
-#define DMOV_CONFIG_IRQ_EN (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN 7
-#define DMOV_NAND_CRCI_CMD 5
-#define DMOV_NAND_CRCI_DATA 4
-
-#define DMOV_SDC1_CHAN 8
-#define DMOV_SDC1_CRCI 6
-
-#define DMOV_SDC2_CHAN 8
-#define DMOV_SDC2_CRCI 7
-
-#define DMOV_TSIF_CHAN 10
-#define DMOV_TSIF_CRCI 10
-
-#define DMOV_USB_CHAN 11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI 0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below. Each
- * pointer points to a *array* of dmov_s, etc structs. The last pointer
- * in the list is marked with CMD_PTR_LP. The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr) ((addr) >> 3)
-#define CMD_PTR_LP (1 << 31) /* last pointer */
-#define CMD_PTR_PT (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
- unsigned cmd;
- unsigned src;
- unsigned dst;
- unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
- unsigned cmd;
- unsigned src_dscr;
- unsigned dst_dscr;
- unsigned _reserved;
-} dmov_sg;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC (1 << 31) /* last command */
-#define CMD_FR (1 << 22) /* force result -- does not work? */
-#define CMD_OCU (1 << 21) /* other channel unblock */
-#define CMD_OCB (1 << 20) /* other channel block */
-#define CMD_TCB (1 << 19) /* ? */
-#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
-#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG (1 << 0) /* untested */
-#define CMD_MODE_IND_SG (2 << 0) /* untested */
-#define CMD_MODE_BOX (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n) (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
-
-#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
deleted file mode 100644
index ee24aec..0000000
--- a/include/asm-arm/arch-msm/entry-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-msm7200/entry-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/msm_iomap.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- mov \base, #MSM_VIC_BASE
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ 0xD0 has irq# or old irq# if the irq has been handled
- @ 0xD4 has irq# or -1 if none pending *but* if you just
- @ read 0xD4 you never get the first irq for some reason
- ldr \irqnr, [\base, #0xD0]
- ldr \irqnr, [\base, #0xD4]
- cmp \irqnr, #0xffffffff
- .endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
deleted file mode 100644
index 89af2b7..0000000
--- a/include/asm-arm/arch-msm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
deleted file mode 100644
index 4645ae2..0000000
--- a/include/asm-arm/arch-msm/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* include/asm-arm/arch-msm/io.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __arch_ioremap __msm_ioremap
-#define __arch_iounmap __iounmap
-
-void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
deleted file mode 100644
index e62a108..0000000
--- a/include/asm-arm/arch-msm/irqs.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* linux/include/asm-arm/arch-msm/irqs.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221 */
-
-#define INT_A9_M2A_0 0
-#define INT_A9_M2A_1 1
-#define INT_A9_M2A_2 2
-#define INT_A9_M2A_3 3
-#define INT_A9_M2A_4 4
-#define INT_A9_M2A_5 5
-#define INT_A9_M2A_6 6
-#define INT_GP_TIMER_EXP 7
-#define INT_DEBUG_TIMER_EXP 8
-#define INT_UART1 9
-#define INT_UART2 10
-#define INT_UART3 11
-#define INT_UART1_RX 12
-#define INT_UART2_RX 13
-#define INT_UART3_RX 14
-#define INT_USB_OTG 15
-#define INT_MDDI_PRI 16
-#define INT_MDDI_EXT 17
-#define INT_MDDI_CLIENT 18
-#define INT_MDP 19
-#define INT_GRAPHICS 20
-#define INT_ADM_AARM 21
-#define INT_ADSP_A11 22
-#define INT_ADSP_A9_A11 23
-#define INT_SDC1_0 24
-#define INT_SDC1_1 25
-#define INT_SDC2_0 26
-#define INT_SDC2_1 27
-#define INT_KEYSENSE 28
-#define INT_TCHSCRN_SSBI 29
-#define INT_TCHSCRN1 30
-#define INT_TCHSCRN2 31
-
-#define INT_GPIO_GROUP1 (32 + 0)
-#define INT_GPIO_GROUP2 (32 + 1)
-#define INT_PWB_I2C (32 + 2)
-#define INT_SOFTRESET (32 + 3)
-#define INT_NAND_WR_ER_DONE (32 + 4)
-#define INT_NAND_OP_DONE (32 + 5)
-#define INT_PBUS_ARM11 (32 + 6)
-#define INT_AXI_MPU_SMI (32 + 7)
-#define INT_AXI_MPU_EBI1 (32 + 8)
-#define INT_AD_HSSD (32 + 9)
-#define INT_ARM11_PMU (32 + 10)
-#define INT_ARM11_DMA (32 + 11)
-#define INT_TSIF_IRQ (32 + 12)
-#define INT_UART1DM_IRQ (32 + 13)
-#define INT_UART1DM_RX (32 + 14)
-#define INT_USB_HS (32 + 15)
-#define INT_SDC3_0 (32 + 16)
-#define INT_SDC3_1 (32 + 17)
-#define INT_SDC4_0 (32 + 18)
-#define INT_SDC4_1 (32 + 19)
-#define INT_UART2DM_RX (32 + 20)
-#define INT_UART2DM_IRQ (32 + 21)
-
-/* 22-31 are reserved */
-
-#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-
-#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
deleted file mode 100644
index b5ce0e9..0000000
--- a/include/asm-arm/arch-msm/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-msm/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#define PHYS_OFFSET UL(0x10000000)
-
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h
deleted file mode 100644
index b8955cc..0000000
--- a/include/asm-arm/arch-msm/msm_iomap.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough. Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE 0xE0000000
-#define MSM_VIC_PHYS 0xC0000000
-#define MSM_VIC_SIZE SZ_4K
-
-#define MSM_CSR_BASE 0xE0001000
-#define MSM_CSR_PHYS 0xC0100000
-#define MSM_CSR_SIZE SZ_4K
-
-#define MSM_GPT_PHYS MSM_CSR_PHYS
-#define MSM_GPT_BASE MSM_CSR_BASE
-#define MSM_GPT_SIZE SZ_4K
-
-#define MSM_DMOV_BASE 0xE0002000
-#define MSM_DMOV_PHYS 0xA9700000
-#define MSM_DMOV_SIZE SZ_4K
-
-#define MSM_UART1_BASE 0xE0003000
-#define MSM_UART1_PHYS 0xA9A00000
-#define MSM_UART1_SIZE SZ_4K
-
-#define MSM_UART2_BASE 0xE0004000
-#define MSM_UART2_PHYS 0xA9B00000
-#define MSM_UART2_SIZE SZ_4K
-
-#define MSM_UART3_BASE 0xE0005000
-#define MSM_UART3_PHYS 0xA9C00000
-#define MSM_UART3_SIZE SZ_4K
-
-#define MSM_I2C_BASE 0xE0006000
-#define MSM_I2C_PHYS 0xA9900000
-#define MSM_I2C_SIZE SZ_4K
-
-#define MSM_GPIO1_BASE 0xE0007000
-#define MSM_GPIO1_PHYS 0xA9200000
-#define MSM_GPIO1_SIZE SZ_4K
-
-#define MSM_GPIO2_BASE 0xE0008000
-#define MSM_GPIO2_PHYS 0xA9300000
-#define MSM_GPIO2_SIZE SZ_4K
-
-#define MSM_HSUSB_BASE 0xE0009000
-#define MSM_HSUSB_PHYS 0xA0800000
-#define MSM_HSUSB_SIZE SZ_4K
-
-#define MSM_CLK_CTL_BASE 0xE000A000
-#define MSM_CLK_CTL_PHYS 0xA8600000
-#define MSM_CLK_CTL_SIZE SZ_4K
-
-#define MSM_PMDH_BASE 0xE000B000
-#define MSM_PMDH_PHYS 0xAA600000
-#define MSM_PMDH_SIZE SZ_4K
-
-#define MSM_EMDH_BASE 0xE000C000
-#define MSM_EMDH_PHYS 0xAA700000
-#define MSM_EMDH_SIZE SZ_4K
-
-#define MSM_MDP_BASE 0xE0010000
-#define MSM_MDP_PHYS 0xAA200000
-#define MSM_MDP_SIZE 0x000F0000
-
-#define MSM_SHARED_RAM_BASE 0xE0100000
-#define MSM_SHARED_RAM_PHYS 0x01F00000
-#define MSM_SHARED_RAM_SIZE SZ_1M
-
-#endif
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
deleted file mode 100644
index fb31b3a..0000000
--- a/include/asm-arm/arch-msm/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-msm/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-void arch_idle(void);
-
-static inline void arch_reset(char mode)
-{
- for (;;) ; /* depends on IPC w/ other core */
-}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
deleted file mode 100644
index 8724487..0000000
--- a/include/asm-arm/arch-msm/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-msm/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
deleted file mode 100644
index e91ed78..0000000
--- a/include/asm-arm/arch-msm/uncompress.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/include/asm-arm/arch-msm/uncompress.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include "hardware.h"
-
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
deleted file mode 100644
index 60f8d91..0000000
--- a/include/asm-arm/arch-msm/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
-
-#endif
-
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
deleted file mode 100644
index d0595bd..0000000
--- a/include/asm-arm/arch-mv78xx0/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/mv78xx0.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =MV78XX0_REGS_PHYS_BASE
- ldrne \rx, =MV78XX0_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h
deleted file mode 100644
index 40a8c17..0000000
--- a/include/asm-arm/arch-mv78xx0/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
deleted file mode 100644
index e9a606b..0000000
--- a/include/asm-arm/arch-mv78xx0/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/mv78xx0.h>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
-
- @ if no low interrupts set, check high interrupts
- ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #63
- andeqs \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
deleted file mode 100644
index 8e179260..0000000
--- a/include/asm-arm/arch-mv78xx0/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
deleted file mode 100644
index 415d4c9..0000000
--- a/include/asm-arm/arch-mv78xx0/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
- + MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
deleted file mode 100644
index 7593045..0000000
--- a/include/asm-arm/arch-mv78xx0/irqs.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/irqs.h
- *
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "mv78xx0.h" /* need GPIO_MAX */
-
-/*
- * MV78xx0 Low Interrupt Controller
- */
-#define IRQ_MV78XX0_ERR 0
-#define IRQ_MV78XX0_SPI 1
-#define IRQ_MV78XX0_I2C_0 2
-#define IRQ_MV78XX0_I2C_1 3
-#define IRQ_MV78XX0_IDMA_0 4
-#define IRQ_MV78XX0_IDMA_1 5
-#define IRQ_MV78XX0_IDMA_2 6
-#define IRQ_MV78XX0_IDMA_3 7
-#define IRQ_MV78XX0_TIMER_0 8
-#define IRQ_MV78XX0_TIMER_1 9
-#define IRQ_MV78XX0_TIMER_2 10
-#define IRQ_MV78XX0_TIMER_3 11
-#define IRQ_MV78XX0_UART_0 12
-#define IRQ_MV78XX0_UART_1 13
-#define IRQ_MV78XX0_UART_2 14
-#define IRQ_MV78XX0_UART_3 15
-#define IRQ_MV78XX0_USB_0 16
-#define IRQ_MV78XX0_USB_1 17
-#define IRQ_MV78XX0_USB_2 18
-#define IRQ_MV78XX0_CRYPTO 19
-#define IRQ_MV78XX0_SDIO_0 20
-#define IRQ_MV78XX0_SDIO_1 21
-#define IRQ_MV78XX0_XOR_0 22
-#define IRQ_MV78XX0_XOR_1 23
-#define IRQ_MV78XX0_I2S_0 24
-#define IRQ_MV78XX0_I2S_1 25
-#define IRQ_MV78XX0_SATA 26
-#define IRQ_MV78XX0_TDMI 27
-
-/*
- * MV78xx0 High Interrupt Controller
- */
-#define IRQ_MV78XX0_PCIE_00 32
-#define IRQ_MV78XX0_PCIE_01 33
-#define IRQ_MV78XX0_PCIE_02 34
-#define IRQ_MV78XX0_PCIE_03 35
-#define IRQ_MV78XX0_PCIE_10 36
-#define IRQ_MV78XX0_PCIE_11 37
-#define IRQ_MV78XX0_PCIE_12 38
-#define IRQ_MV78XX0_PCIE_13 39
-#define IRQ_MV78XX0_GE00_SUM 40
-#define IRQ_MV78XX0_GE00_RX 41
-#define IRQ_MV78XX0_GE00_TX 42
-#define IRQ_MV78XX0_GE00_MISC 43
-#define IRQ_MV78XX0_GE01_SUM 44
-#define IRQ_MV78XX0_GE01_RX 45
-#define IRQ_MV78XX0_GE01_TX 46
-#define IRQ_MV78XX0_GE01_MISC 47
-#define IRQ_MV78XX0_GE10_SUM 48
-#define IRQ_MV78XX0_GE10_RX 49
-#define IRQ_MV78XX0_GE10_TX 50
-#define IRQ_MV78XX0_GE10_MISC 51
-#define IRQ_MV78XX0_GE11_SUM 52
-#define IRQ_MV78XX0_GE11_RX 53
-#define IRQ_MV78XX0_GE11_TX 54
-#define IRQ_MV78XX0_GE11_MISC 55
-#define IRQ_MV78XX0_GPIO_0_7 56
-#define IRQ_MV78XX0_GPIO_8_15 57
-#define IRQ_MV78XX0_GPIO_16_23 58
-#define IRQ_MV78XX0_GPIO_24_31 59
-#define IRQ_MV78XX0_DB_IN 60
-#define IRQ_MV78XX0_DB_OUT 61
-
-/*
- * MV78XX0 General Purpose Pins
- */
-#define IRQ_MV78XX0_GPIO_START 64
-#define NR_GPIO_IRQS GPIO_MAX
-
-#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
deleted file mode 100644
index 721a6b1..0000000
--- a/include/asm-arm/arch-mv78xx0/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h
deleted file mode 100644
index 9f5d83c..0000000
--- a/include/asm-arm/arch-mv78xx0/mv78xx0.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/mv78xx0.h
- *
- * Generic definitions for Marvell MV78xx0 SoC flavors:
- * MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MV78XX0_H
-#define __ASM_ARCH_MV78XX0_H
-
-/*
- * Marvell MV78xx0 address maps.
- *
- * phys
- * c0000000 PCIe Memory space
- * f0800000 PCIe #0 I/O space
- * f0900000 PCIe #1 I/O space
- * f0a00000 PCIe #2 I/O space
- * f0b00000 PCIe #3 I/O space
- * f0c00000 PCIe #4 I/O space
- * f0d00000 PCIe #5 I/O space
- * f0e00000 PCIe #6 I/O space
- * f0f00000 PCIe #7 I/O space
- * f1000000 on-chip peripheral registers
- *
- * virt phys size
- * fe400000 f102x000 16K core-specific peripheral registers
- * fe700000 f0800000 1M PCIe #0 I/O space
- * fe800000 f0900000 1M PCIe #1 I/O space
- * fe900000 f0a00000 1M PCIe #2 I/O space
- * fea00000 f0b00000 1M PCIe #3 I/O space
- * feb00000 f0c00000 1M PCIe #4 I/O space
- * fec00000 f0d00000 1M PCIe #5 I/O space
- * fed00000 f0e00000 1M PCIe #6 I/O space
- * fee00000 f0f00000 1M PCIe #7 I/O space
- * fef00000 f1000000 1M on-chip peripheral registers
- */
-#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
-#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
-#define MV78XX0_CORE_REGS_SIZE SZ_16K
-
-#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_SIZE SZ_1M
-
-#define MV78XX0_REGS_PHYS_BASE 0xf1000000
-#define MV78XX0_REGS_VIRT_BASE 0xfef00000
-#define MV78XX0_REGS_SIZE SZ_1M
-
-#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
-#define MV78XX0_PCIE_MEM_SIZE 0x30000000
-
-/*
- * Core-specific peripheral registers.
- */
-#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0008
-#define IRQ_MASK_LOW_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
-
-#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
-#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
-#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
-#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
-#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
-
-
-#define GPIO_MAX 32
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
deleted file mode 100644
index 7eb47d3..0000000
--- a/include/asm-arm/arch-mv78xx0/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/mv78xx0.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
deleted file mode 100644
index a854b1c..0000000
--- a/include/asm-arm/arch-mv78xx0/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
deleted file mode 100644
index 3bfe0a2..0000000
--- a/include/asm-arm/arch-mv78xx0/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/mv78xx0.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
deleted file mode 100644
index f2c5121..0000000
--- a/include/asm-arm/arch-mv78xx0/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
deleted file mode 100644
index 575087f..0000000
--- a/include/asm-arm/arch-mxc/debug-macro.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <asm/arch/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <asm/arch/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <asm/arch/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <asm/arch/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <asm/arch/board-pcm038.h>
-#endif
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =MXC_LL_UART_PADDR @ physical
- ldrne \rx, =MXC_LL_UART_VADDR @ virtual
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
deleted file mode 100644
index 5f13a65..0000000
--- a/include/asm-arm/arch-mxc/gpio.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <asm/arch/hardware.h>
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES)
-
-struct mxc_gpio_port {
- void __iomem *base;
- int irq;
- int virtual_irq_start;
- struct gpio_chip chip;
-};
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
deleted file mode 100644
index 37cddba..0000000
--- a/include/asm-arm/arch-mxc/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#define __ASM_ARCH_MXC_HARDWARE_H__
-
-#include <asm/sizes.h>
-
-#ifdef CONFIG_ARCH_MX3
-# include <asm/arch/mx31.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# ifdef CONFIG_MACH_MX27
-# include <asm/arch/mx27.h>
-# endif
-#endif
-
-#include <asm/arch/mxc.h>
-
-#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
deleted file mode 100644
index 21411ef..0000000
--- a/include/asm-arm/arch-mxc/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-#include <asm/arch/hardware.h>
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
deleted file mode 100644
index 7e669ee..0000000
--- a/include/asm-arm/arch-mxc/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#include <asm/arch/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a) __virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a) __phys_to_virt(a)
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h
deleted file mode 100644
index 5439fa6..0000000
--- a/include/asm-arm/arch-mxc/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_ARCH_IMX
-#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT TIM1_INT
-
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-
-#define MXC_TCTL 0x00
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_IMX */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT1
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG (1<<6)
-#define TCTL_FRR (1<<9)
-#define TCTL_WAITEN (1<<3)
-
-#define MXC_TPRER 0x04
-#define MXC_TSTAT 0x08
-#define TSTAT_OF1 (1<<0)
-#define TSTAT_OF2 (1<<1)
-#define TSTAT_OF3 (1<<2)
-#define TSTAT_IF1 (1<<3)
-#define TSTAT_IF2 (1<<4)
-#define TSTAT_ROV (1<<5)
-#define MXC_IR 0x0c
-#define MXC_TCMP 0x10
-#define MXC_TCMP2 0x14
-#define MXC_TCMP3 0x18
-#define MXC_TCR 0x1c
-#define MXC_TCN 0x24
-
-static inline void gpt_irq_disable(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR (1<<15)
-#define TCTL_CC (1<<10)
-#define TCTL_OM (1<<9)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_CAP_ENA (1<<5)
-#define TCTL_TEN (1<<0)
-
-#endif
diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h
deleted file mode 100644
index 432e0c8..0000000
--- a/include/asm-arm/arch-mxc/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-#include <asm/arch/hardware.h> /* for CLOCK_TICK_RATE */
-
-#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h
deleted file mode 100644
index 18f33b0..0000000
--- a/include/asm-arm/arch-mxc/uncompress.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-mxc/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/arch/hardware.h>
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
- static unsigned long serial_port = 0;
-
- if (unlikely(serial_port == 0)) {
- do {
- serial_port = UART1_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- serial_port = UART2_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- return;
- } while (0);
- }
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = ch;
-}
-
-#define flush() do { } while (0)
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S
deleted file mode 100644
index a940d0e..0000000
--- a/include/asm-arm/arch-netx/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-netx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00100000 @ physical
- movne \rx, #io_p2v(0x00100000) @ virtual
- orr \rx, \rx, #0x00000a00
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x18]
- tst \rd, #(1 << 3)
- bne 1002b
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18]
- tst \rd, #(1 << 3)
- bne 1001b
- .endm
diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h
deleted file mode 100644
index 4eda5fe..0000000
--- a/include/asm-arm/arch-netx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S
deleted file mode 100644
index 4115bbd..0000000
--- a/include/asm-arm/arch-netx/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-netx/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <asm/arch/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \base, #io_p2v(0x00100000)
- add \base, \base, #0x000ff000
-
- ldr \irqstat, [\base, #0]
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- cmp \irqstat, #0
- .endm
-
diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h
deleted file mode 100644
index 643c90e..0000000
--- a/include/asm-arm/arch-netx/eth.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-netx/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
- unsigned int xcno; /* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h
deleted file mode 100644
index 7786c45..0000000
--- a/include/asm-arm/arch-netx/hardware.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-netx/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS 0x00100000
-#define NETX_IO_VIRT 0xe0000000
-#define NETX_IO_SIZE 0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h
deleted file mode 100644
index a7a53f8..0000000
--- a/include/asm-arm/arch-netx/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/io.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h
deleted file mode 100644
index a487dc6..0000000
--- a/include/asm-arm/arch-netx/irqs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-arm/arch-netx/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define NETX_IRQ_VIC_START 0
-#define NETX_IRQ_SOFTINT 0
-#define NETX_IRQ_TIMER0 1
-#define NETX_IRQ_TIMER1 2
-#define NETX_IRQ_TIMER2 3
-#define NETX_IRQ_SYSTIME_NS 4
-#define NETX_IRQ_SYSTIME_S 5
-#define NETX_IRQ_GPIO_15 6
-#define NETX_IRQ_WATCHDOG 7
-#define NETX_IRQ_UART0 8
-#define NETX_IRQ_UART1 9
-#define NETX_IRQ_UART2 10
-#define NETX_IRQ_USB 11
-#define NETX_IRQ_SPI 12
-#define NETX_IRQ_I2C 13
-#define NETX_IRQ_LCD 14
-#define NETX_IRQ_HIF 15
-#define NETX_IRQ_GPIO_0_14 16
-#define NETX_IRQ_XPEC0 17
-#define NETX_IRQ_XPEC1 18
-#define NETX_IRQ_XPEC2 19
-#define NETX_IRQ_XPEC3 20
-#define NETX_IRQ_XPEC(no) (17 + (no))
-#define NETX_IRQ_MSYNC0 21
-#define NETX_IRQ_MSYNC1 22
-#define NETX_IRQ_MSYNC2 23
-#define NETX_IRQ_MSYNC3 24
-#define NETX_IRQ_IRQ_PHY 25
-#define NETX_IRQ_ISO_AREA 26
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3 29
-#define NETX_IRQ_TIMER4 30
-/* int 31 is reserved */
-
-#define NETX_IRQS 32
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h
deleted file mode 100644
index 6d8d2df..0000000
--- a/include/asm-arm/arch-netx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h
deleted file mode 100644
index fc9aa21..0000000
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * include/asm-arm/arch-netx/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM 0x00000
-#define NETX_OFS_MEMCR 0x00100
-#define NETX_OFS_DPMAS 0x03000
-#define NETX_OFS_GPIO 0x00800
-#define NETX_OFS_PIO 0x00900
-#define NETX_OFS_UART0 0x00a00
-#define NETX_OFS_UART1 0x00a40
-#define NETX_OFS_UART2 0x00a80
-#define NETX_OF_MIIMU 0x00b00
-#define NETX_OFS_SPI 0x00c00
-#define NETX_OFS_I2C 0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC 0x01200
-#define NETX_OFS_EXTBUS 0x03600
-#define NETX_OFS_LCD 0x04000
-#define NETX_OFS_USB 0x20000
-#define NETX_OFS_XMAC0 0x60000
-#define NETX_OFS_XMAC1 0x61000
-#define NETX_OFS_XMAC2 0x62000
-#define NETX_OFS_XMAC3 0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO 0x64000
-#define NETX_OFS_XPEC0 0x70000
-#define NETX_OFS_XPEC1 0x74000
-#define NETX_OFS_XPEC2 0x78000
-#define NETX_OFS_XPEC3 0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC 0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virual addresses */
-#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26)
-
-#define PHY_CONTROL_RESET (1<<31)
-#define PHY_CONTROL_SIM_BYP (1<<30)
-#define PHY_CONTROL_CLK_XLATIN (1<<29)
-#define PHY_CONTROL_PHY1_EN (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF 0
-#define PHY_MODE_10BASE_T_FULL 1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF 4
-#define PHY_MODE_REPEATER 5
-#define PHY_MODE_POWER_DOWN 6
-#define PHY_MODE_ALL 7
-
-/* Bits */
-#define VECT_CNTL_ENABLE (1 << 5)
-
-/*******************************
- * GPIO and timer module *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2)
-#define NETX_GPIO_CFG_INV (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio) (1<<(gpio))
-#define COUNTER_BIT(counter) ((1<<16)<<(counter))
-
-/*******************************
- * PIO *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU __io(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY (1<<0)
-#define MIIMU_PREAMBLE (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD (1<<3)
-#define MIIMU_PHY_NRES (1<<4)
-#define MIIMU_RTA (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data) (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS 0x00
-#define NETX_XPEC_R1_OFS 0x04
-#define NETX_XPEC_R2_OFS 0x08
-#define NETX_XPEC_R3_OFS 0x0c
-#define NETX_XPEC_R4_OFS 0x10
-#define NETX_XPEC_R5_OFS 0x14
-#define NETX_XPEC_R6_OFS 0x18
-#define NETX_XPEC_R7_OFS 0x1c
-#define NETX_XPEC_RANGE01_OFS 0x20
-#define NETX_XPEC_RANGE23_OFS 0x24
-#define NETX_XPEC_RANGE45_OFS 0x28
-#define NETX_XPEC_RANGE67_OFS 0x2c
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS 0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS 0x90
-#define NETX_XPEC_FIFO_DATA_OFS 0x94
-#define NETX_XPEC_SYSTIME_S_OFS 0x98
-#define NETX_XPEC_ADC_OFS 0x9c
-#define NETX_XPEC_URX_COUNT_OFS 0x40
-#define NETX_XPEC_UTX_COUNT_OFS 0x44
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_ZERO_OFS 0x4c
-#define NETX_XPEC_STATCFG_OFS 0x50
-#define NETX_XPEC_EC_MASKA_OFS 0x54
-#define NETX_XPEC_EC_MASKB_OFS 0x58
-#define NETX_XPEC_EC_MASK0_OFS 0x5c
-#define NETX_XPEC_EC_MASK8_OFS 0x7c
-#define NETX_XPEC_EC_MASK9_OFS 0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100
-#define NETX_XPEC_RAM_START_OFS 0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS 0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS 0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS 0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS 0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c
-
-#define RPU_HOLD_PC (1<<15)
-#define TPU_HOLD_PC (1<<15)
-
-/*******************************
- * Pointer FIFO *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-/*******************************
- * Dual Port Memory *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30)
-#define NETX_DPMAS_INT_EN_WDG (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72 (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47 (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40 (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36 (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35 (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17)
-#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE (1<<2)
-#define NETX_EXT_CONFIG_16BIT (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0 (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2 (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1 (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30)
-
-/*******************************
- * I2C *
- *******************************/
-#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h
deleted file mode 100644
index 7a80c26..0000000
--- a/include/asm-arm/arch-netx/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h
deleted file mode 100644
index 4af2ee4..0000000
--- a/include/asm-arm/arch-netx/pfifo.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-netx/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
- writel(pointer, NETX_PFIFO_BASE(no));
- return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
- return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
- return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
- return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
- return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h
deleted file mode 100644
index 0624d87..0000000
--- a/include/asm-arm/arch-netx/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-netx/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include "netx-regs.h"
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
- NETX_SYSTEM_RES_CR);
-}
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h
deleted file mode 100644
index 7fdb42da..0000000
--- a/include/asm-arm/arch-netx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-netx/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h
deleted file mode 100644
index f894345..0000000
--- a/include/asm-arm/arch-netx/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-netx/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static void putc(char c)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_TXFF);
- REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h
deleted file mode 100644
index da2da5a..0000000
--- a/include/asm-arm/arch-netx/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h
deleted file mode 100644
index 659af19..0000000
--- a/include/asm-arm/arch-netx/xc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netx/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
- int no;
- unsigned int type;
- unsigned int version;
- void __iomem *xpec_base;
- void __iomem *xmac_base;
- void __iomem *sram_base;
- int irq;
- struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
deleted file mode 100644
index e57443b..0000000
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev() (0 \
- || machine_is_cc9p9360dev() \
- || machine_is_cc9p9750dev() \
- )
-
-#define board_is_a9mvali() (0 \
- || machine_is_cc9p9360val() \
- || machine_is_cc9p9750val() \
- )
-
-#define board_is_jscc9p9210() (0 \
- || machine_is_cc9p9210js() \
- )
-
-#define board_is_jscc9p9215() (0 \
- || machine_is_cc9p9215js() \
- )
-
-#define board_is_jscc9p9360() (0 \
- || machine_is_cc9p9360js() \
- )
-
-#define board_is_uncbas() (0 \
- || machine_is_cc7ucamry() \
- )
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S
deleted file mode 100644
index c78908d..0000000
--- a/include/asm-arm/arch-ns9xxx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-
-#include <asm/arch/regs-board-a9m9750dev.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
- ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h
deleted file mode 100644
index a67cbbe..0000000
--- a/include/asm-arm/arch-ns9xxx/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
deleted file mode 100644
index e9d9449..0000000
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-sys-common.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =SYS_ISRADDR
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
- cmp \irqstat, #0
- ldrne \irqnr, [\base]
- .endm
-
- .macro disable_fiq
- .endm
diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h
deleted file mode 100644
index adbca08..0000000
--- a/include/asm-arm/arch-ns9xxx/gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
deleted file mode 100644
index 0dca11c..0000000
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/memory.h>
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x) (0xf0000000 \
- + (((x) & 0xf0000000) >> 4) \
- + ((x) & 0x00ffffff))
-
-#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
- + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask) ((mask) & (-(mask)))
-
-#define __REGBIT(bit) ((u32)1 << (bit))
-#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x) ((void __iomem __force *)io_p2v((x)))
-# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-# define __REGSET(var, field, value) \
- ((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-# define REGSET(var, reg, field, value) \
- __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-# define REGSET_IDX(var, reg, field, idx, value) \
- __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-# define REGSETIM(var, reg, field, value) \
- __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-# define REGSETIM_IDX(var, reg, field, idx, value) \
- __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-# define __REGGET(var, field) \
- (((var) & (field)))
-
-# define REGGET(var, reg, field) \
- __REGGET(var, reg ## _ ## field)
-
-# define REGGET_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx)))
-
-# define REGGETIM(var, reg, field) \
- __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-# define REGGETIM_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx))) / \
- __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __REG2(x, y) io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h
deleted file mode 100644
index 6f82d28..0000000
--- a/include/asm-arm/arch-ns9xxx/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff /* XXX */
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-#define __mem_isa(a) (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
deleted file mode 100644
index e83d48e..0000000
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG 0
-#define IRQ_NS9XXX_AHBBUSERR 1
-#define IRQ_NS9360_BBUSAGG 2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX 4
-#define IRQ_NS9XXX_ETHTX 5
-#define IRQ_NS9XXX_ETHPHY 6
-#define IRQ_NS9360_LCD 7
-#define IRQ_NS9360_SERBRX 8
-#define IRQ_NS9360_SERBTX 9
-#define IRQ_NS9360_SERARX 10
-#define IRQ_NS9360_SERATX 11
-#define IRQ_NS9360_SERCRX 12
-#define IRQ_NS9360_SERCTX 13
-#define IRQ_NS9360_I2C 14
-#define IRQ_NS9360_BBUSDMA 15
-#define IRQ_NS9360_TIMER0 16
-#define IRQ_NS9360_TIMER1 17
-#define IRQ_NS9360_TIMER2 18
-#define IRQ_NS9360_TIMER3 19
-#define IRQ_NS9360_TIMER4 20
-#define IRQ_NS9360_TIMER5 21
-#define IRQ_NS9360_TIMER6 22
-#define IRQ_NS9360_TIMER7 23
-#define IRQ_NS9360_RTC 24
-#define IRQ_NS9360_USBHOST 25
-#define IRQ_NS9360_USBDEVICE 26
-#define IRQ_NS9360_IEEE1284 27
-#define IRQ_NS9XXX_EXT0 28
-#define IRQ_NS9XXX_EXT1 29
-#define IRQ_NS9XXX_EXT2 30
-#define IRQ_NS9XXX_EXT3 31
-
-#define BBUS_IRQ(irq) (32 + irq)
-
-#define IRQ_BBUS_DMA BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
-#define IRQ_BBUS_I2C BBUS_IRQ(10)
-#define IRQ_BBUS_1284 BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL BBUS_IRQ(12)
-#define IRQ_BBUS_RTC BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq) (64 + irq)
-
-#define IRQ_FPGA_UARTA FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
-#define IRQ_FPGA_CF FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
-
-#define NR_IRQS 72
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h
deleted file mode 100644
index ce1343e..0000000
--- a/include/asm-arm/arch-ns9xxx/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h
deleted file mode 100644
index ac08a31..0000000
--- a/include/asm-arm/arch-ns9xxx/module.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry() (0 \
- || machine_is_cc7ucamry() \
- )
-
-#define module_is_cc9c() (0 \
- || machine_is_cc9c() \
- )
-
-#define module_is_cc9p9210() (0 \
- || machine_is_cc9p9210() \
- || machine_is_cc9p9210js() \
- )
-
-#define module_is_cc9p9215() (0 \
- || machine_is_cc9p9215() \
- || machine_is_cc9p9215js() \
- )
-
-#define module_is_cc9p9360() (0 \
- || machine_is_a9m9360() \
- || machine_is_cc9p9360dev() \
- || machine_is_cc9p9360js() \
- || machine_is_cc9p9360val() \
- )
-
-#define module_is_cc9p9750() (0 \
- || machine_is_a9m9750() \
- || machine_is_cc9p9750dev() \
- || machine_is_cc9p9750js() \
- || machine_is_cc9p9750val() \
- )
-
-#define module_is_ccw9c() (0 \
- || machine_is_ccw9c() \
- )
-
-#define module_is_inc20otter() (0 \
- || machine_is_inc20otter() \
- )
-
-#define module_is_otter() (0 \
- || machine_is_otter() \
- )
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h
deleted file mode 100644
index f3aa6c5..0000000
--- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor-ns9360.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSORNS9360_H
-#define __ASM_ARCH_PROCESSORNS9360_H
-
-#include <linux/init.h>
-
-void ns9360_reset(char mode);
-
-unsigned long ns9360_systemclock(void) __attribute__((const));
-
-static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
-static inline unsigned long ns9360_cpuclock(void)
-{
- return ns9360_systemclock() / 2;
-}
-
-void __init ns9360_map_io(void);
-
-extern struct sys_timer ns9360_timer;
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func);
-
-#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
deleted file mode 100644
index 3137e5b..0000000
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <asm/arch/module.h>
-
-#define processor_is_ns9210() (0 \
- || module_is_cc7ucamry() \
- || module_is_cc9p9210() \
- || module_is_inc20otter() \
- || module_is_otter() \
- )
-
-#define processor_is_ns9215() (0 \
- || module_is_cc9p9215() \
- )
-
-#define processor_is_ns9360() (0 \
- || module_is_cc9p9360() \
- || module_is_cc9c() \
- || module_is_ccw9c() \
- )
-
-#define processor_is_ns9750() (0 \
- || module_is_cc9p9750() \
- )
-
-#define processor_is_ns921x() (0 \
- || processor_is_ns9210() \
- || processor_is_ns9215() \
- )
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h
deleted file mode 100644
index b41b31d..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-bbu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-bbu.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBBU_H
-#define __ASM_ARCH_REGSBBU_H
-
-#include <asm/arch/hardware.h>
-
-/* BBus Utility */
-
-/* GPIO Configuration Registers block 1 */
-/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
- * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register
- * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
-#define BBU_GCONFb1(x) __REG2(0x90600010, (x))
-#define BBU_GCONFb2(x) __REG2(0x90600100, (x))
-
-#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2))
-#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0)
-#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1)
-#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2))
-#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0)
-#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1)
-#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
-#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0)
-#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1)
-#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2)
-#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3)
-
-#define BBU_GCTRL1 __REG(0x90600030)
-#define BBU_GCTRL2 __REG(0x90600034)
-#define BBU_GCTRL3 __REG(0x90600120)
-
-#define BBU_GSTAT1 __REG(0x90600040)
-#define BBU_GSTAT2 __REG(0x90600044)
-#define BBU_GSTAT3 __REG(0x90600130)
-
-#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
deleted file mode 100644
index 6bf1ed2..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
-#define __ASM_ARCH_REGSBOARDA9M9750_H
-
-#include <asm/arch/hardware.h>
-
-#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
-#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
-#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
-
-#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
-#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
-
-#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h
deleted file mode 100644
index 023f7be..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-mem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <asm/arch/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL __REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT __REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF __REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL __REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT __REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC __REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP __REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP __REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET __REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT __REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT __REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT __REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP __REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP __REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC __REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT __REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT __REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW __REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC __REGBIT(20)
-#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC __REGBIT(19)
-#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW __REGBIT(8)
-#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB __REGBIT(7)
-#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC __REGBIT(6)
-#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM __REGBIT(3)
-#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW __REGBITS(1, 0)
-#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h
deleted file mode 100644
index bc82d5e..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-common.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGSSYSCOMMON_H
-#define __ASM_ARCH_REGSSYSCOMMON_H
-#include <asm/arch/hardware.h>
-
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x) __REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x) __REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA __REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR __REG(0xa090016c)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
deleted file mode 100644
index 821275a..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSSYSNS9360_H
-#define __ASM_ARCH_REGSSYSNS9360_H
-
-#include <asm/arch/hardware.h>
-
-/* System Control Module */
-
-/* AHB Arbiter Gen Configuration */
-#define SYS_AHBAGENCONF __REG(0xa0900000)
-
-/* BRC */
-#define SYS_BRC(x) __REG2(0xa0900004, (x))
-
-/* Timer x Reload Count register */
-#define SYS_TRC(x) __REG2(0xa0900044, (x))
-
-/* Timer x Read register */
-#define SYS_TR(x) __REG2(0xa0900084, (x))
-
-/* Timer Interrupt Status register */
-#define SYS_TIS __REG(0xa0900170)
-
-/* PLL Configuration register */
-#define SYS_PLL __REG(0xa0900188)
-
-/* PLL FS status */
-#define SYS_PLL_FS __REGBITS(24, 23)
-
-/* PLL ND status */
-#define SYS_PLL_ND __REGBITS(20, 16)
-
-/* PLL Configuration register: PLL SW change */
-#define SYS_PLL_SWC __REGBIT(15)
-#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
-#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
-
-/* Timer x Control register */
-#define SYS_TC(x) __REG2(0xa0900190, (x))
-
-/* Timer x Control register: Timer enable */
-#define SYS_TCx_TEN __REGBIT(15)
-#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0)
-#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
-
-/* Timer x Control register: CPU debug mode */
-#define SYS_TCx_TDBG __REGBIT(10)
-#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
-#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
-
-/* Timer x Control register: Interrupt clear */
-#define SYS_TCx_INTC __REGBIT(9)
-#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
-#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
-
-/* Timer x Control register: Timer clock select */
-#define SYS_TCx_TLCS __REGBITS(8, 6)
-#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
-#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
-#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
-#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
-#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
-#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
-#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
-#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
-
-/* Timer x Control register: Timer mode */
-#define SYS_TCx_TM __REGBITS(5, 4)
-#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
-#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
-#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
-#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
-
-/* Timer x Control register: Interrupt select */
-#define SYS_TCx_INTS __REGBIT(3)
-#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
-#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
-
-/* Timer x Control register: Up/down select */
-#define SYS_TCx_UDS __REGBIT(2)
-#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
-#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
-
-/* Timer x Control register: 32- or 16-bit timer */
-#define SYS_TCx_TSZ __REGBIT(1)
-#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
-#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
-
-/* Timer x Control register: Reload enable */
-#define SYS_TCx_REN __REGBIT(0)
-#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
-#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
-
-/* System Memory Chip Select x Dynamic Memory Base */
-#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
-
-/* System Memory Chip Select x Dynamic Memory Mask */
-#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base */
-#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base: Chip select x base */
-#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask */
-#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
-#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
-#define SYS_SMCSSMM_CSEx __REGBIT(0)
-#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
-#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
-
-/* General purpose, user-defined ID register */
-#define SYS_GENID __REG(0xa0900210)
-
-/* External Interrupt x Control register */
-#define SYS_EIC(x) __REG2(0xa0900214, (x))
-
-/* External Interrupt x Control register: Status */
-#define SYS_EIC_STS __REGBIT(3)
-
-/* External Interrupt x Control register: Clear */
-#define SYS_EIC_CLR __REGBIT(2)
-
-/* External Interrupt x Control register: Polarity */
-#define SYS_EIC_PLTY __REGBIT(1)
-#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
-#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
-
-/* External Interrupt x Control register: Level edge */
-#define SYS_EIC_LVEDG __REGBIT(0)
-#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
-#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
deleted file mode 100644
index c294168..0000000
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <asm/arch/processor.h>
-#include <asm/arch/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
- if (processor_is_ns9360())
- ns9360_reset(mode);
- else
-#endif
- BUG();
-
- BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h
deleted file mode 100644
index f776cbd..0000000
--- a/include/asm-arm/arch-ns9xxx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
deleted file mode 100644
index 71066ba..0000000
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-
-#define __REG(x) ((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
- /* nothing */
-}
-
-static void putc_ns9360(char c, void __iomem *base)
-{
- static int t = 0x10000;
- do {
- if (t)
- --t;
-
- if (__raw_readl(base + 8) & (1 << 3)) {
- __raw_writeb(c, base + 16);
- t = 0x10000;
- break;
- }
- } while (t);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
- static int t = 0x10000;
- do {
- if (t)
- --t;
-
- if (__raw_readb(base + 5) & (1 << 5)) {
- __raw_writeb(c, base);
- t = 0x10000;
- break;
- }
- } while (t);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
- static int t = 0x10000;
- do {
- if (t)
- --t;
-
- if (!(__raw_readl(base) & (1 << 11))) {
- __raw_writeb(c, base + 0x0028);
- t = 0x10000;
- break;
- }
- } while (t);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA __REG(0x90200040)
-#define NS9360_UARTB __REG(0x90200000)
-#define NS9360_UARTC __REG(0x90300000)
-#define NS9360_UARTD __REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base) \
- (__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA __REG(0x40000000)
-
-#define NS921XSYS_CLOCK __REG(0xa090017c)
-#define NS921X_UARTA __REG(0x90010000)
-#define NS921X_UARTB __REG(0x90018000)
-#define NS921X_UARTC __REG(0x90020000)
-#define NS921X_UARTD __REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base) \
- (__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
- if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
- /* ns9360 or ns9750 */
- if (NS9360_UART_ENABLED(NS9360_UARTA)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTA;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTB;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTC;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTD;
- return;
- } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
- *putc = putc_a9m9750dev;
- *base = A9M9750DEV_UARTA;
- return;
- }
- } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
- /* ns921x */
- u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
- if ((clock & (1 << 1)) &&
- NS921X_UART_ENABLED(NS921X_UARTA)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTA;
- return;
- } else if ((clock & (1 << 2)) &&
- NS921X_UART_ENABLED(NS921X_UARTB)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTB;
- return;
- } else if ((clock & (1 << 3)) &&
- NS921X_UART_ENABLED(NS921X_UARTC)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTC;
- return;
- } else if ((clock & (1 << 4)) &&
- NS921X_UART_ENABLED(NS921X_UARTD)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTD;
- return;
- }
- }
-
- *putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
- myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
- autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
- /* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h
deleted file mode 100644
index 2f3cb6f..0000000
--- a/include/asm-arm/arch-ns9xxx/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (0xf0000000)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h
deleted file mode 100644
index aec2d65..0000000
--- a/include/asm-arm/arch-omap/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR 0x00
-#define RIGHT_LINE_VOLUME_ADDR 0x01
-#define LEFT_CHANNEL_VOLUME_ADDR 0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
-#define ANALOG_AUDIO_CONTROL_ADDR 0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
-#define POWER_DOWN_CONTROL_ADDR 0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
-#define SAMPLE_RATE_CONTROL_ADDR 0x08
-#define DIGITAL_INTERFACE_ACT_ADDR 0x09
-#define RESET_CONTROL_ADDR 0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED 0x0100
-#define LIM_MUTED 0x0080
-#define LIV_DEFAULT 0x0017
-#define LIV_MAX 0x001f
-#define LIV_MIN 0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON 0x0080
-#define LHV_DEFAULT 0x0079
-#define LHV_MAX 0x007f
-#define LHV_MIN 0x0000
-
-// Analog audio path control register
-#define STA_REG(x) ((x)<<6)
-#define STE_ENABLED 0x0020
-#define DAC_SELECTED 0x0010
-#define BYPASS_ON 0x0008
-#define INSEL_MIC 0x0004
-#define MICM_MUTED 0x0002
-#define MICB_20DB 0x0001
-
-// Digital audio path control register
-#define DACM_MUTE 0x0008
-#define DEEMP_32K 0x0002
-#define DEEMP_44K 0x0004
-#define DEEMP_48K 0x0006
-#define ADCHP_ON 0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF 0x0080
-#define CLK_OFF 0x0040
-#define OSC_OFF 0x0020
-#define OUT_OFF 0x0010
-#define DAC_OFF 0x0008
-#define ADC_OFF 0x0004
-#define MIC_OFF 0x0002
-#define LINE_OFF 0x0001
-
-// Digital audio interface register
-#define MS_MASTER 0x0040
-#define LRSWAP_ON 0x0020
-#define LRP_ON 0x0010
-#define IWL_16 0x0000
-#define IWL_20 0x0004
-#define IWL_24 0x0008
-#define IWL_32 0x000C
-#define FOR_I2S 0x0002
-#define FOR_DSP 0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF 0x0080
-#define CLKIN_HALF 0x0040
-#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON 0x0001
-#define SR_MASK 0xf
-#define CLKOUT_SHIFT 7
-#define CLKIN_SHIFT 6
-#define SR_SHIFT 2
-#define BOSR_SHIFT 1
-
-// Digital interface register
-#define ACT_ON 0x0001
-
-#define TLV320AIC23ID1 (0x1a) // cs low
-#define TLV320AIC23ID2 (0x1b) // cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
deleted file mode 100644
index c7db900..0000000
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ 149
-#define SDP2430_CS0_BASE 0x04000000
-
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h
deleted file mode 100644
index 9aee15d..0000000
--- a/include/asm-arm/arch-omap/board-ams-delta.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMS_DELTA_LATCH1_PHYS 0x01000000
-#define AMS_DELTA_LATCH1_VIRT 0xEA000000
-#define AMS_DELTA_MODEM_PHYS 0x04000000
-#define AMS_DELTA_MODEM_VIRT 0xEB000000
-#define AMS_DELTA_LATCH2_PHYS 0x08000000
-#define AMS_DELTA_LATCH2_VIRT 0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
-#define AMS_DELTA_LATCH1_LED_VOICE 0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE 0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP 0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
-#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
-#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
-#define AMS_DELTA_GPIO_PIN_CONFIG 11
-#define AMS_DELTA_GPIO_PIN_NAND_RB 12
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h
deleted file mode 100644
index 547125a..0000000
--- a/include/asm-arm/arch-omap/board-apollon.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-extern void apollon_mmc_init(void);
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ 74
-
-#endif /* __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h
deleted file mode 100644
index 89a1e52..0000000
--- a/include/asm-arm/arch-omap/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE 0xE8100000
-#define FSAMPLE_CPLD_SIZE SZ_4K
-#define FSAMPLE_CPLD_START 0x05080000
-
-#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET 0
-#define FSAMPLE_CPLD_BIT_LCD_RESET 1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
-#define FSAMPLE_CPLD_BIT_OTG_RESET 9
-
-#define fsample_cpld_set(bit) \
- fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
- fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
deleted file mode 100644
index c322796..0000000
--- a/include/asm-arm/arch-omap/board-h2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-/* Placeholder for H2 specific defines */
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START 0x04000300
-
-extern void h2_mmc_init(void);
-extern void h2_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_OMAP_H2_H */
-
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
deleted file mode 100644
index c5d0f32..0000000
--- a/include/asm-arm/arch-omap/board-h3.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START 0x04000300
-
-extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_OMAP_H3_H */
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
deleted file mode 100644
index 7e0efef..0000000
--- a/include/asm-arm/arch-omap/board-h4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h4.h
- *
- * Hardware definitions for TI OMAP1610 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ 92
-#endif /* __ASM_ARCH_OMAP_H4_H */
-
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
deleted file mode 100644
index 9ca03de..0000000
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START 0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h
deleted file mode 100644
index 72deea2..0000000
--- a/include/asm-arm/arch-omap/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-nokia.h
- *
- * Information structures for Nokia-specific board config data
- *
- * Copyright (C) 2005 Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT 0x4e01
-#define OMAP_TAG_WLAN_CX3110X 0x4e02
-#define OMAP_TAG_CBUS 0x4e03
-#define OMAP_TAG_EM_ASIC_BB5 0x4e04
-
-
-#define BT_CHIP_CSR 1
-#define BT_CHIP_TI 2
-
-#define BT_SYSCLK_12 1
-#define BT_SYSCLK_38_4 2
-
-struct omap_bluetooth_config {
- u8 chip_type;
- u8 bt_wakeup_gpio;
- u8 host_wakeup_gpio;
- u8 reset_gpio;
- u8 bt_uart;
- u8 bd_addr[6];
- u8 bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
- u8 chip_type;
- s16 power_gpio;
- s16 irq_gpio;
- s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
- s16 clk_gpio;
- s16 dat_gpio;
- s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
- s16 retu_irq_gpio;
- s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
deleted file mode 100644
index 9492609..0000000
--- a/include/asm-arm/arch-omap/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START 0x04800300
-
-/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
-# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
-# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
-# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
-# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
-# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
-
-#endif /* __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
deleted file mode 100644
index 6fac2c8..0000000
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters : http://palmtelinux.sf.net
- * palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO 0
-#define PALMTE_USB_OR_DC_GPIO 1
-#define PALMTE_TSC_GPIO 4
-#define PALMTE_PINTDAV_GPIO 6
-#define PALMTE_MMC_WP_GPIO 8
-#define PALMTE_MMC_POWER_GPIO 9
-#define PALMTE_HDQ_GPIO 11
-#define PALMTE_HEADPHONES_GPIO 14
-#define PALMTE_SPEAKER_GPIO 15
-#define PALMTE_DC_GPIO OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-
-#endif /* __OMAP_BOARD_PALMTE_H */
diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h
deleted file mode 100644
index d9590b0..0000000
--- a/include/asm-arm/arch-omap/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO 0
-#define PALMTT_CABLE_GPIO 1
-#define PALMTT_LED_GPIO 3
-#define PALMTT_PENIRQ_GPIO 6
-#define PALMTT_MMC_WP_GPIO 8
-#define PALMTT_HDQ_GPIO 11
-
-#endif /* __OMAP_BOARD_PALMTT_H */
diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h
deleted file mode 100644
index 1252a85..0000000
--- a/include/asm-arm/arch-omap/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO 0
-#define PALMZ71_PENIRQ_GPIO 6
-#define PALMZ71_MMC_WP_GPIO 8
-#define PALMZ71_HDQ_GPIO 11
-
-#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-
-#endif /* __OMAP_BOARD_PALMZ71_H */
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
deleted file mode 100644
index d7429cb..0000000
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-perseus2.h
- *
- * Copyright 2003 by Texas Instruments Incorporated
- * OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <asm/arch/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index 99564c7..0000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board.h
- *
- * Information structures for board-specific data
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_MMC 0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB 0x4f04
-#define OMAP_TAG_LCD 0x4f05
-#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_UART 0x4f07
-#define OMAP_TAG_FBMEM 0x4f08
-#define OMAP_TAG_STI_CONSOLE 0x4f09
-#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
-
-#define OMAP_TAG_BOOT_REASON 0x4f80
-#define OMAP_TAG_FLASH_PART 0x4f81
-#define OMAP_TAG_VERSION_STR 0x4f82
-
-struct omap_clock_config {
- /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
- u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
- unsigned enabled:1;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* switch pin can be for card detect (default) or card cover */
- unsigned cover:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO */
- unsigned wire4:1;
- s16 power_pin;
- s16 switch_pin;
- s16 wp_pin;
-};
-
-struct omap_mmc_config {
- struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
- u8 console_uart;
- u32 console_speed;
-};
-
-struct omap_sti_console_config {
- unsigned enable:1;
- u8 channel;
-};
-
-struct omap_camera_sensor_config {
- u16 reset_gpio;
- int (*power_on)(void * data);
- int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
- /* Configure drivers according to the connectors on your board:
- * - "A" connector (rectagular)
- * ... for host/OHCI use, set "register_host".
- * - "B" connector (squarish) or "Mini-B"
- * ... for device/gadget use, set "register_dev".
- * - "Mini-AB" connector (very similar to Mini-B)
- * ... for OTG use as device OR host, initialize "otg"
- */
- unsigned register_host:1;
- unsigned register_dev:1;
- u8 otg; /* port number, 1-based: usb1 == 2 */
-
- u8 hmc_mode;
-
- /* implicitly true if otg: host supports remote wakeup? */
- u8 rwc;
-
- /* signaling pins used to talk to transceiver on usbN:
- * 0 == usbN unused
- * 2 == usb0-only, using internal transceiver
- * 3 == 3 wire bidirectional
- * 4 == 4 wire bidirectional
- * 6 == 6 wire unidirectional (or TLL)
- */
- u8 pins[3];
-};
-
-struct omap_lcd_config {
- char panel_name[16];
- char ctrl_name[16];
- s16 nreset_gpio;
- u8 data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
- int default_intensity;
- int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
- u32 start;
- u32 size;
-};
-
-struct omap_pwm_led_platform_data {
- const char *name;
- int intensity_timer;
- int blink_timer;
- void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
- char name[12];
- u16 gpio;
- int flags:4;
- int type:4;
- int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART1 */
- unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
- char part_table[0];
-};
-
-struct omap_boot_reason_config {
- char reason_str[12];
-};
-
-struct omap_version_config {
- char component[12];
- char version[12];
-};
-
-
-#include <asm/arch/board-nokia.h>
-
-struct omap_board_config_entry {
- u16 tag;
- u16 len;
- u8 data[0];
-};
-
-struct omap_board_config_kernel {
- u16 tag;
- const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
- ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
- ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
deleted file mode 100644
index 4c7b351..0000000
--- a/include/asm-arm/arch-omap/clock.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-struct clk;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-struct clksel_rate {
- u8 div;
- u32 val;
- u8 flags;
-};
-
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
-struct dpll_data {
- void __iomem *mult_div1_reg;
- u32 mult_mask;
- u32 div1_mask;
- u16 last_rounded_m;
- u8 last_rounded_n;
- unsigned long last_rounded_rate;
- unsigned int rate_tolerance;
- u16 max_multiplier;
- u8 max_divider;
- u32 max_tolerance;
-# if defined(CONFIG_ARCH_OMAP3)
- u8 modes;
- void __iomem *control_reg;
- u32 enable_mask;
- u8 auto_recal_bit;
- u8 recal_en_bit;
- u8 recal_st_bit;
- void __iomem *autoidle_reg;
- u32 autoidle_mask;
- void __iomem *idlest_reg;
- u8 idlest_bit;
-# endif
-};
-
-#endif
-
-struct clk {
- struct list_head node;
- struct module *owner;
- const char *name;
- int id;
- struct clk *parent;
- unsigned long rate;
- __u32 flags;
- void __iomem *enable_reg;
- __u8 enable_bit;
- __s8 usecount;
- void (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- u8 fixed_div;
- void __iomem *clksel_reg;
- u32 clksel_mask;
- const struct clksel *clksel;
- struct dpll_data *dpll_data;
-#else
- __u8 rate_offset;
- __u8 src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
-#endif
-};
-
-struct cpufreq_frequency_table;
-
-struct clk_functions {
- int (*clk_enable)(struct clk *clk);
- void (*clk_disable)(struct clk *clk);
- long (*clk_round_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- struct clk * (*clk_get_parent)(struct clk *clk);
- void (*clk_allow_idle)(struct clk *clk);
- void (*clk_deny_idle)(struct clk *clk);
- void (*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
- void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
-};
-
-extern unsigned int mpurate;
-
-extern int clk_init(struct clk_functions * custom_clocks);
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-
-/* Clock flags */
-#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
-#define RATE_FIXED (1 << 1) /* Fixed clock rate */
-#define RATE_PROPAGATES (1 << 2) /* Program children too */
-#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */
-#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */
-#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */
-#define CLOCK_IDLE_CONTROL (1 << 7)
-#define CLOCK_NO_IDLE_PARENT (1 << 8)
-#define DELAYED_APP (1 << 9) /* Delay application of clock */
-#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
-#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310 (1 << 21)
-#define CLOCK_IN_OMAP730 (1 << 22)
-#define CLOCK_IN_OMAP1510 (1 << 23)
-#define CLOCK_IN_OMAP16XX (1 << 24)
-#define CLOCK_IN_OMAP242X (1 << 25)
-#define CLOCK_IN_OMAP243X (1 << 26)
-#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK (1 << 28)
-#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */
-
-/* Clksel_rate flags */
-#define DEFAULT_RATE (1 << 0)
-#define RATE_IN_242X (1 << 1)
-#define RATE_IN_243X (1 << 2)
-#define RATE_IN_343X (1 << 3) /* rates common to all 343X */
-#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-
-
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K 0
-#define CORE_CLK_SRC_DPLL 1
-#define CORE_CLK_SRC_DPLL_X2 2
-
-#endif
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
deleted file mode 100644
index 8ac0307..0000000
--- a/include/asm-arm/arch-omap/common.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <linux/i2c.h>
-
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-#ifdef CONFIG_I2C_OMAP
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
-{
- return 0;
-}
-#endif
-
-/* IO bases for various OMAP processors */
-struct omap_globals {
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_memory(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
deleted file mode 100644
index 987553e..0000000
--- a/include/asm-arm/arch-omap/control.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-/*
- * include/asm-arm/arch-omap/control.h
- *
- * OMAP2/3 System Control Module definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-#define OMAP242X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE 0x000
-#define OMAP2_CONTROL_PADCONFS 0x030
-#define OMAP2_CONTROL_GENERAL 0x270
-#define OMAP343X_CONTROL_MEM_WKUP 0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file. Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
-#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK (0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK (1 << 5)
-#define OMAP2_SYSBOOT_4_MASK (1 << 4)
-#define OMAP2_SYSBOOT_3_MASK (1 << 3)
-#define OMAP2_SYSBOOT_2_MASK (1 << 2)
-#define OMAP2_SYSBOOT_1_MASK (1 << 1)
-#define OMAP2_SYSBOOT_0_MASK (1 << 0)
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-#else
-#define omap_ctrl_base_get() 0
-#define omap_ctrl_readb(x) 0
-#define omap_ctrl_readw(x) 0
-#define omap_ctrl_readl(x) 0
-#define omap_ctrl_writeb(x, y) WARN_ON(1)
-#define omap_ctrl_writew(x, y) WARN_ON(1)
-#define omap_ctrl_writel(x, y) WARN_ON(1)
-#endif
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
deleted file mode 100644
index 52db09f..0000000
--- a/include/asm-arm/arch-omap/cpu.h
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-struct omap_chip_id {
- u8 oc;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730
- * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x(): True for OMAP2430
- * cpu_is_omap343x(): True for OMAP3430
- */
-#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff)
-
-#define IS_OMAP_CLASS(class, id) \
-static inline int is_omap ##class (void) \
-{ \
- return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id) \
-static inline int is_omap ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-
-#define cpu_is_omap7xx() 0
-#define cpu_is_omap15xx() 0
-#define cpu_is_omap16xx() 0
-#define cpu_is_omap24xx() 0
-#define cpu_is_omap242x() 0
-#define cpu_is_omap243x() 0
-#define cpu_is_omap34xx() 0
-#define cpu_is_omap343x() 0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() 1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
-# undef cpu_is_omap24xx
-# undef cpu_is_omap242x
-# undef cpu_is_omap243x
-# define cpu_is_omap24xx() is_omap24xx()
-# define cpu_is_omap242x() is_omap242x()
-# define cpu_is_omap243x() is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap34xx
-# undef cpu_is_omap343x
-# define cpu_is_omap34xx() is_omap34xx()
-# define cpu_is_omap343x() is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP24XX)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap34xx
-# define cpu_is_omap34xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP3430)
-# undef cpu_is_omap343x
-# define cpu_is_omap343x() 1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330(): True for OMAP330
- * cpu_is_omap730(): True for OMAP730
- * cpu_is_omap1510(): True for OMAP1510
- * cpu_is_omap1610(): True for OMAP1610
- * cpu_is_omap1611(): True for OMAP1611
- * cpu_is_omap5912(): True for OMAP5912
- * cpu_is_omap1621(): True for OMAP1621
- * cpu_is_omap1710(): True for OMAP1710
- * cpu_is_omap2420(): True for OMAP2420
- * cpu_is_omap2422(): True for OMAP2422
- * cpu_is_omap2423(): True for OMAP2423
- * cpu_is_omap2430(): True for OMAP2430
- * cpu_is_omap3430(): True for OMAP3430
- */
-#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id) \
-static inline int is_omap ##type (void) \
-{ \
- return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310() 0
-#define cpu_is_omap730() 0
-#define cpu_is_omap1510() 0
-#define cpu_is_omap1610() 0
-#define cpu_is_omap5912() 0
-#define cpu_is_omap1611() 0
-#define cpu_is_omap1621() 0
-#define cpu_is_omap1710() 0
-#define cpu_is_omap2420() 0
-#define cpu_is_omap2422() 0
-#define cpu_is_omap2423() 0
-#define cpu_is_omap2430() 0
-#define cpu_is_omap3430() 0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() 1
-# endif
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap310
-# undef cpu_is_omap1510
-# define cpu_is_omap310() is_omap310()
-# define cpu_is_omap1510() is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap1610
-# undef cpu_is_omap1611
-# undef cpu_is_omap5912
-# undef cpu_is_omap1621
-# undef cpu_is_omap1710
-# define cpu_is_omap1610() is_omap1610()
-# define cpu_is_omap1611() is_omap1611()
-# define cpu_is_omap5912() is_omap5912()
-# define cpu_is_omap1621() is_omap1621()
-# define cpu_is_omap1710() is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-# undef cpu_is_omap2420
-# undef cpu_is_omap2422
-# undef cpu_is_omap2423
-# undef cpu_is_omap2430
-# define cpu_is_omap2420() is_omap2420()
-# define cpu_is_omap2422() is_omap2422()
-# define cpu_is_omap2423() is_omap2423()
-# define cpu_is_omap2430() is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap3430
-# define cpu_is_omap3430() is_omap3430()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \
- cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than: true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to: true if passed cpu type & its rev is equal.
- * get_sil_rev: return the silicon rev value.
- */
-#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12)
-
-#define is_sil_rev_greater_than(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) > get_sil_revision(rev)))
-
-#define is_sil_rev_less_than(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) < get_sil_revision(rev)))
-
-#define is_sil_rev_equal_to(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
- get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP2420_REV_ES1_0 0x24200000
-#define OMAP2420_REV_ES2_0 0x24201000
-#define OMAP2430_REV_ES1_0 0x24300000
-#define OMAP3430_REV_ES1_0 0x34300000
-#define OMAP3430_REV_ES2_0 0x34301000
-#define OMAP3430_REV_ES2_1 0x34302000
-#define OMAP3430_REV_ES2_2 0x34303000
-
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-int omap_chip_is(struct omap_chip_id oci);
-
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define DEVICE_TYPE_TEST 0
-#define DEVICE_TYPE_EMU 1
-#define DEVICE_TYPE_SEC 2
-#define DEVICE_TYPE_GP 3
-#define DEVICE_TYPE_BAD 4
-
-#define get_device_type() ((system_rev & 0x700) >> 8)
-#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
-
-void omap2_check_revision(void);
-
-#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
deleted file mode 100644
index ca4f577..0000000
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-omap/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
- moveq \rx, #0xff000000 @ physical base address
- movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- orr \rx, \rx, #0x00009000 @ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
- orr \rx, \rx, #0x00000800 @ UART 2 & 3
-#endif
-
-#elif CONFIG_ARCH_OMAP2
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xd8000000 @ virtual base
- orr \rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00004000 @ UART 3
-#endif
-#endif
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
- beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
- bne 1001b
-1002:
- .endm
-
- .macro waituart,rd,rx
- .endm
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
deleted file mode 100644
index f4dcb95..0000000
--- a/include/asm-arm/arch-omap/dma.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/dma.h
- *
- * Copyright (C) 2003 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE (0xfffed800)
-
-#define OMAP1_DMA_GCR 0x400
-#define OMAP1_DMA_GSCR 0x404
-#define OMAP1_DMA_GRST 0x408
-#define OMAP1_DMA_HW_ID 0x442
-#define OMAP1_DMA_PCH2_ID 0x444
-#define OMAP1_DMA_PCH0_ID 0x446
-#define OMAP1_DMA_PCH1_ID 0x448
-#define OMAP1_DMA_PCHG_ID 0x44a
-#define OMAP1_DMA_PCHD_ID 0x44c
-#define OMAP1_DMA_CAPS_0_U 0x44e
-#define OMAP1_DMA_CAPS_0_L 0x450
-#define OMAP1_DMA_CAPS_1_U 0x452
-#define OMAP1_DMA_CAPS_1_L 0x454
-#define OMAP1_DMA_CAPS_2 0x456
-#define OMAP1_DMA_CAPS_3 0x458
-#define OMAP1_DMA_CAPS_4 0x45a
-#define OMAP1_DMA_PCH2_SR 0x460
-#define OMAP1_DMA_PCH0_SR 0x480
-#define OMAP1_DMA_PCH1_SR 0x482
-#define OMAP1_DMA_PCHD_SR 0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION 0x00
-#define OMAP_DMA4_GCR 0x78
-#define OMAP_DMA4_IRQSTATUS_L0 0x08
-#define OMAP_DMA4_IRQSTATUS_L1 0x0c
-#define OMAP_DMA4_IRQSTATUS_L2 0x10
-#define OMAP_DMA4_IRQSTATUS_L3 0x14
-#define OMAP_DMA4_IRQENABLE_L0 0x18
-#define OMAP_DMA4_IRQENABLE_L1 0x1c
-#define OMAP_DMA4_IRQENABLE_L2 0x20
-#define OMAP_DMA4_IRQENABLE_L3 0x24
-#define OMAP_DMA4_SYSSTATUS 0x28
-#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
-#define OMAP_DMA4_CAPS_0 0x64
-#define OMAP_DMA4_CAPS_2 0x6c
-#define OMAP_DMA4_CAPS_3 0x70
-#define OMAP_DMA4_CAPS_4 0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT 17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
-#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
-#define OMAP1_DMA_CCEN(n) 0
-#define OMAP1_DMA_CCFN(n) 0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION 0
-#define OMAP1_DMA_IRQSTATUS_L0 0
-#define OMAP1_DMA_IRQENABLE_L0 0
-#define OMAP1_DMA_OCP_SYSCONFIG 0
-#define OMAP_DMA4_HW_ID 0
-#define OMAP_DMA4_CAPS_0_L 0
-#define OMAP_DMA4_CAPS_0_U 0
-#define OMAP_DMA4_CAPS_1_L 0
-#define OMAP_DMA4_CAPS_1_U 0
-#define OMAP_DMA4_GSCR 0
-#define OMAP_DMA4_CPC(n) 0
-
-#define OMAP_DMA4_LCH_CTRL(n) 0
-#define OMAP_DMA4_COLOR_L(n) 0
-#define OMAP_DMA4_COLOR_U(n) 0
-#define OMAP_DMA4_CCR2(n) 0
-#define OMAP1_DMA_CSSA(n) 0
-#define OMAP1_DMA_CDSA(n) 0
-#define OMAP_DMA4_CSSA_L(n) 0
-#define OMAP_DMA4_CSSA_U(n) 0
-#define OMAP_DMA4_CDSA_L(n) 0
-#define OMAP_DMA4_CDSA_U(n) 0
-
-/*----------------------------------------------------------------------------*/
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCSI1_TX 1
-#define OMAP_DMA_MCSI1_RX 2
-#define OMAP_DMA_I2C_RX 3
-#define OMAP_DMA_I2C_TX 4
-#define OMAP_DMA_EXT_NDMA_REQ 5
-#define OMAP_DMA_EXT_NDMA_REQ2 6
-#define OMAP_DMA_UWIRE_TX 7
-#define OMAP_DMA_MCBSP1_TX 8
-#define OMAP_DMA_MCBSP1_RX 9
-#define OMAP_DMA_MCBSP3_TX 10
-#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_UART1_TX 12
-#define OMAP_DMA_UART1_RX 13
-#define OMAP_DMA_UART2_TX 14
-#define OMAP_DMA_UART2_RX 15
-#define OMAP_DMA_MCBSP2_TX 16
-#define OMAP_DMA_MCBSP2_RX 17
-#define OMAP_DMA_UART3_TX 18
-#define OMAP_DMA_UART3_RX 19
-#define OMAP_DMA_CAMERA_IF_RX 20
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_NAND 23
-#define OMAP_DMA_IRQ_LCD_LINE 24
-#define OMAP_DMA_MEMORY_STICK 25
-#define OMAP_DMA_USB_W2FC_RX0 26
-#define OMAP_DMA_USB_W2FC_RX1 27
-#define OMAP_DMA_USB_W2FC_RX2 28
-#define OMAP_DMA_USB_W2FC_TX0 29
-#define OMAP_DMA_USB_W2FC_TX1 30
-#define OMAP_DMA_USB_W2FC_TX2 31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN 32
-#define OMAP_DMA_SPI_TX 33
-#define OMAP_DMA_SPI_RX 34
-#define OMAP_DMA_CRYPTO_HASH 35
-#define OMAP_DMA_CCP_ATTN 36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-#define OMAP_DMA_CRYPTO_DES_OUT 56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE 0
-#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-
-/*----------------------------------------------------------------------------*/
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE (0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE (0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
-
-#define OMAP1_DMA_TOUT_IRQ (1 << 0)
-#define OMAP_DMA_DROP_IRQ (1 << 1)
-#define OMAP_DMA_HALF_IRQ (1 << 2)
-#define OMAP_DMA_FRAME_IRQ (1 << 3)
-#define OMAP_DMA_LAST_IRQ (1 << 4)
-#define OMAP_DMA_BLOCK_IRQ (1 << 5)
-#define OMAP1_DMA_SYNC_IRQ (1 << 6)
-#define OMAP2_DMA_PKT_IRQ (1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
-
-#define OMAP_DMA_DATA_TYPE_S8 0x00
-#define OMAP_DMA_DATA_TYPE_S16 0x01
-#define OMAP_DMA_DATA_TYPE_S32 0x02
-
-#define OMAP_DMA_SYNC_ELEMENT 0x00
-#define OMAP_DMA_SYNC_FRAME 0x01
-#define OMAP_DMA_SYNC_BLOCK 0x02
-#define OMAP_DMA_SYNC_PACKET 0x03
-
-#define OMAP_DMA_SRC_SYNC 0x01
-#define OMAP_DMA_DST_SYNC 0x00
-
-#define OMAP_DMA_PORT_EMIFF 0x00
-#define OMAP_DMA_PORT_EMIFS 0x01
-#define OMAP_DMA_PORT_OCP_T1 0x02
-#define OMAP_DMA_PORT_TIPB 0x03
-#define OMAP_DMA_PORT_OCP_T2 0x04
-#define OMAP_DMA_PORT_MPUI 0x05
-
-#define OMAP_DMA_AMODE_CONSTANT 0x00
-#define OMAP_DMA_AMODE_POST_INC 0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX 0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH 0x10
-#define DMA_DEFAULT_ARB_RATE 0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET (0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT (0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET (0x03 << 12)
-#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75 (0x01 << 14)
-#define DMA_THREAD_FIFO_25 (0x02 << 14)
-#define DMA_THREAD_FIFO_50 (0x03 << 14)
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN 0x1
-#define OMAP_DMA_DYNAMIC_CHAIN 0x2
-#define OMAP_DMA_CHAIN_ACTIVE 0x1
-#define OMAP_DMA_CHAIN_INACTIVE 0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH 0x1
-#define DMA_CH_PRIO_LOW 0x0 /* Def */
-
-/* LCD DMA block numbers */
-enum {
- OMAP_LCD_DMA_B1_TOP,
- OMAP_LCD_DMA_B1_BOTTOM,
- OMAP_LCD_DMA_B2_TOP,
- OMAP_LCD_DMA_B2_BOTTOM
-};
-
-enum omap_dma_burst_mode {
- OMAP_DMA_DATA_BURST_DIS = 0,
- OMAP_DMA_DATA_BURST_4,
- OMAP_DMA_DATA_BURST_8,
- OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
- OMAP_DMA_LITTLE_ENDIAN = 0,
- OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
- OMAP_DMA_COLOR_DIS = 0,
- OMAP_DMA_CONSTANT_FILL,
- OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
- OMAP_DMA_WRITE_NON_POSTED = 0,
- OMAP_DMA_WRITE_POSTED,
- OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
- OMAP_DMA_LCH_2D = 0,
- OMAP_DMA_LCH_G,
- OMAP_DMA_LCH_P,
- OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
- int data_type; /* data type 8,16,32 */
- int elem_count; /* number of elements in a frame */
- int frame_count; /* number of frames in a element */
-
- int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int src_amode; /* constant, post increment, indexed,
- double indexed */
- unsigned long src_start; /* source address : physical */
- int src_ei; /* source element index */
- int src_fi; /* source frame index */
-
- int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
- int dst_amode; /* constant, post increment, indexed,
- double indexed */
- unsigned long dst_start; /* source address : physical */
- int dst_ei; /* source element index */
- int dst_fi; /* source frame index */
-
- int trigger; /* trigger attached if the channel is
- synchronized */
- int sync_mode; /* sycn on element, frame , block or packet */
- int src_or_dst_synch; /* source synch(1) or destination synch(0) */
-
- int ie; /* interrupt enabled */
-
- unsigned char read_prio;/* read priority */
- unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
- enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
- void (*callback)(int lch, u16 ch_status, void *data),
- void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
- int elem_count, int frame_count,
- int sync_mode,
- int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
- u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
- unsigned long src_start,
- int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
- enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
- unsigned long dest_start,
- int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
- enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
- struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
- void (*callback)(int lch, u16 ch_status, void *data),
- void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
- int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
- unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
- void *data),
- int *chain_id, int no_of_chans,
- int chain_mode,
- struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
- int dest_start, int elem_count,
- int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
- struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
- void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
- int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
deleted file mode 100644
index 02b29e8..0000000
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/dmtimer.h
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framwork support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
-
-/* clock sources */
-#define OMAP_TIMER_SRC_SYS_CLK 0x00
-#define OMAP_TIMER_SRC_32_KHZ 0x01
-#define OMAP_TIMER_SRC_EXT_CLK 0x02
-
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE (1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
-#define OMAP_TIMER_INT_MATCH (1 << 0)
-
-/* trigger types */
-#define OMAP_TIMER_TRIGGER_NONE 0x00
-#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
-#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
-
-struct omap_dm_timer;
-struct clk;
-
-int omap_dm_timer_init(void);
-
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
-
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
-
-int omap_dm_timers_active(void);
-
-
-#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h
deleted file mode 100644
index ccee3b0..0000000
--- a/include/asm-arm/arch-omap/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
deleted file mode 100644
index 67ed783..0000000
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-omap/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
- (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ INT_1510_IH2_IRQ
-#endif
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
- ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
- ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
- mov \irqstat, #0xffffffff
- bic \tmp, \irqstat, \tmp
- tst \irqnr, \tmp
- beq 1510f
-
- ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
- cmp \irqnr, #0
- ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
- cmpeq \irqnr, #INT_IH2_IRQ
- ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
- ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
- addeqs \irqnr, \irqnr, #32
-1510:
- .endm
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#include <asm/arch/omap24xx.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP2_VA_IC_BASE
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 2222f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 2222f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
-2222:
- ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
-
- .endm
-
- .macro irq_prio_table
- .endm
-
-#endif
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
deleted file mode 100644
index f420881..0000000
--- a/include/asm-arm/arch-omap/fpga.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
-extern void omap1510_fpga_init_irq(void);
-#else
-#define omap1510_fpga_init_irq() (0)
-#endif
-
-#define fpga_read(reg) __raw_readb(reg)
-#define fpga_write(val, reg) __raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- * H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
-/* cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* Physical */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE 0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
-#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
-#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
-#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
deleted file mode 100644
index 5ee6a49..0000000
--- a/include/asm-arm/arch-omap/gpio.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000
-
-#ifdef CONFIG_ARCH_OMAP730
-#define OMAP_MPUIO_INPUT_LATCH 0x00
-#define OMAP_MPUIO_OUTPUT 0x02
-#define OMAP_MPUIO_IO_CNTL 0x04
-#define OMAP_MPUIO_KBR_LATCH 0x08
-#define OMAP_MPUIO_KBC 0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e
-#define OMAP_MPUIO_KBD_INT 0x10
-#define OMAP_MPUIO_GPIO_INT 0x12
-#define OMAP_MPUIO_KBD_MASKIT 0x14
-#define OMAP_MPUIO_GPIO_MASKIT 0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18
-#define OMAP_MPUIO_LATCH 0x1a
-#else
-#define OMAP_MPUIO_INPUT_LATCH 0x00
-#define OMAP_MPUIO_OUTPUT 0x04
-#define OMAP_MPUIO_IO_CNTL 0x08
-#define OMAP_MPUIO_KBR_LATCH 0x10
-#define OMAP_MPUIO_KBC 0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
-#define OMAP_MPUIO_KBD_INT 0x20
-#define OMAP_MPUIO_GPIO_INT 0x24
-#define OMAP_MPUIO_KBD_MASKIT 0x28
-#define OMAP_MPUIO_GPIO_MASKIT 0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
-#define OMAP_MPUIO_LATCH 0x34
-#endif
-
-#define OMAP34XX_NR_GPIOS 6
-
-#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
-
-#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
- IH_MPUIO_BASE + ((nr) & 0x0f) : \
- IH_GPIO_BASE + (nr))
-
-extern int omap_gpio_init(void); /* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- * *
- * The original OMAP-specfic calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (gpio < (OMAP_MAX_GPIO_LINES + 16))
- return OMAP_GPIO_IRQ(gpio);
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
- return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
- return irq - IH_GPIO_BASE;
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h
deleted file mode 100644
index 4eed1f8..0000000
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
deleted file mode 100644
index 45fdfcc..0000000
--- a/include/asm-arm/arch-omap/hardware.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- * file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <asm/arch/cpu.h>
-#endif
-#include <asm/arch/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- * files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE (0xfffec500)
-#define OMAP_MPU_TIMER2_BASE (0xfffec600)
-#define OMAP_MPU_TIMER3_BASE (0xfffec700)
-#define MPU_TIMER_FREE (1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
-#define MPU_TIMER_AR (1 << 1)
-#define MPU_TIMER_ST (1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE (0xfffece00)
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF 1
-#define CK_IDLEF 2
-#define CK_ENABLEF 4
-#define CK_SELECTF 8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL (0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE (0xe1008000)
-#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE (0xfffe0800)
-#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
-# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
-# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
-# define SOFT_UDC_REQ (1 << 4)
-# define SOFT_USB_CLK_REQ (1 << 3)
-# define SOFT_DPLL_REQ (1 << 0)
-#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
-# define DIS_MMC2_DPLL_REQ (1 << 11)
-# define DIS_MMC1_DPLL_REQ (1 << 10)
-# define DIS_UART3_DPLL_REQ (1 << 9)
-# define DIS_UART2_DPLL_REQ (1 << 8)
-# define DIS_UART1_DPLL_REQ (1 << 7)
-# define DIS_USB_HOST_DPLL_REQ (1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
-#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE 0xfffecb00
-#define OMAP_IH2_BASE 0xfffe0000
-
-#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET 0x00
-#define IRQ_MIR_REG_OFFSET 0x04
-#define IRQ_SIR_IRQ_REG_OFFSET 0x10
-#define IRQ_SIR_FIQ_REG_OFFSET 0x14
-#define IRQ_CONTROL_REG_OFFSET 0x18
-#define IRQ_ISR_REG_OFFSET 0x9c
-#define IRQ_ILR0_REG_OFFSET 0x1c
-#define IRQ_GMR_REG_OFFSET 0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0 0xfffe1080
-#define MOD_CONF_CTRL_1 0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0 0xfffe1000
-#define FUNC_MUX_CTRL_1 0xfffe1004
-#define FUNC_MUX_CTRL_2 0xfffe1008
-#define COMP_MODE_CTRL_0 0xfffe100c
-#define FUNC_MUX_CTRL_3 0xfffe1010
-#define FUNC_MUX_CTRL_4 0xfffe1014
-#define FUNC_MUX_CTRL_5 0xfffe1018
-#define FUNC_MUX_CTRL_6 0xfffe101C
-#define FUNC_MUX_CTRL_7 0xfffe1020
-#define FUNC_MUX_CTRL_8 0xfffe1024
-#define FUNC_MUX_CTRL_9 0xfffe1028
-#define FUNC_MUX_CTRL_A 0xfffe102C
-#define FUNC_MUX_CTRL_B 0xfffe1030
-#define FUNC_MUX_CTRL_C 0xfffe1034
-#define FUNC_MUX_CTRL_D 0xfffe1038
-#define PULL_DWN_CTRL_0 0xfffe1040
-#define PULL_DWN_CTRL_1 0xfffe1044
-#define PULL_DWN_CTRL_2 0xfffe1048
-#define PULL_DWN_CTRL_3 0xfffe104c
-#define PULL_DWN_CTRL_4 0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E 0xfffe1090
-#define FUNC_MUX_CTRL_F 0xfffe1094
-#define FUNC_MUX_CTRL_10 0xfffe1098
-#define FUNC_MUX_CTRL_11 0xfffe109c
-#define FUNC_MUX_CTRL_12 0xfffe10a0
-#define PU_PD_SEL_0 0xfffe10b4
-#define PU_PD_SEL_1 0xfffe10b8
-#define PU_PD_SEL_2 0xfffe10bc
-#define PU_PD_SEL_3 0xfffe10c0
-#define PU_PD_SEL_4 0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE 0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE (0xfffec900)
-#define MPUI_CTRL (MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE 0xfffbd000
-#define OMAP_LPG2_BASE 0xfffbd800
-#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE 0xfffb5800
-#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap24xx.h"
-#include "omap16xx.h"
-#include "omap34xx.h"
-
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
deleted file mode 100644
index 449e356..0000000
--- a/include/asm-arm/arch-omap/io.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a) (a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#define PCIO_BASE 0
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#define IO_PHYS 0xFFFB0000
-#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define IO_SIZE 0x40000
-#define IO_VIRT (IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define io_p2v(pa) ((pa) - IO_OFFSET)
-#define io_v2p(va) ((va) + IO_OFFSET)
-
-#elif defined(CONFIG_ARCH_OMAP2)
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
-#define L3_24XX_VIRT 0xf8000000
-#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
-#define L4_24XX_VIRT 0xd8000000
-#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
-#define L4_WK_243X_VIRT 0xd9000000
-#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
-#define OMAP243X_GPMC_VIRT 0xFE000000
-#define OMAP243X_GPMC_SIZE SZ_1M
-#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT 0xFD000000
-#define OMAP243X_SDRC_SIZE SZ_1M
-#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT 0xFC000000
-#define OMAP243X_SMS_SIZE SZ_1M
-
-#endif
-
-#define IO_OFFSET 0x90000000
-#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_24XX_VIRT 0xe0000000
-#define DSP_MEM_24XX_SIZE 0x28000
-#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_24XX_VIRT 0xe1000000
-#define DSP_IPI_24XX_SIZE SZ_4K
-#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT 0xe2000000
-#define DSP_MMU_24XX_SIZE SZ_4K
-
-#elif defined(CONFIG_ARCH_OMAP3)
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
-#define L3_34XX_VIRT 0xf8000000
-#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
-#define L4_34XX_VIRT 0xd8000000
-#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT 0xd8300000
-#define L4_WK_34XX_SIZE SZ_1M
-
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT 0xd9000000
-#define L4_PER_34XX_SIZE SZ_1M
-
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT 0xe4000000
-#define L4_EMU_34XX_SIZE SZ_64M
-
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT 0xFE000000
-#define OMAP34XX_GPMC_SIZE SZ_1M
-
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT 0xFC000000
-#define OMAP343X_SMS_SIZE SZ_1M
-
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT 0xFD000000
-#define OMAP343X_SDRC_SIZE SZ_1M
-
-
-#define IO_OFFSET 0x90000000
-#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_34XX_VIRT 0xe0000000
-#define DSP_MEM_34XX_SIZE 0x28000
-#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_34XX_VIRT 0xe1000000
-#define DSP_IPI_34XX_SIZE SZ_4K
-#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT 0xe2000000
-#define DSP_MMU_34XX_SIZE SZ_4K
-
-#endif
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
-#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
-
-#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h
deleted file mode 100644
index 96bb12f..0000000
--- a/include/asm-arm/arch-omap/irda.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/irda.h
- *
- * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL 1 /* Selects IrDA */
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-#define IR_MIRMODE 8
-
-struct omap_irda_config {
- int transceiver_cap;
- int (*transceiver_mode)(struct device *dev, int mode);
- int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
- int rx_channel;
- int tx_channel;
- unsigned long dest_start;
- unsigned long src_start;
- int tx_trigger;
- int rx_trigger;
- int mode;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
deleted file mode 100644
index afbf1e8..0000000
--- a/include/asm-arm/arch-omap/irqs.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/irqs.h
- *
- * Copyright (C) Greg Lonnon 2001
- * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- * are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA 1
-#define INT_FIQ 3
-#define INT_RTDX 6
-#define INT_DSP_MMU_ABORT 7
-#define INT_HOST 8
-#define INT_ABORT 9
-#define INT_BRIDGE_PRIV 13
-#define INT_GPIO_BANK1 14
-#define INT_UART3 15
-#define INT_TIMER3 16
-#define INT_DMA_CH0_6 19
-#define INT_DMA_CH1_7 20
-#define INT_DMA_CH2_8 21
-#define INT_DMA_CH3 22
-#define INT_DMA_CH4 23
-#define INT_DMA_CH5 24
-#define INT_DMA_LCD 25
-#define INT_TIMER1 26
-#define INT_WD_TIMER 27
-#define INT_BRIDGE_PUB 28
-#define INT_TIMER2 30
-#define INT_LCD_CTRL 31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ 0
-#define INT_1510_RES2 2
-#define INT_1510_SPI_TX 4
-#define INT_1510_SPI_RX 5
-#define INT_1510_DSP_MAILBOX1 10
-#define INT_1510_DSP_MAILBOX2 11
-#define INT_1510_RES12 12
-#define INT_1510_LB_MMU 17
-#define INT_1510_RES18 18
-#define INT_1510_LOCAL_BUS 29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ 0
-#define INT_1610_IH2_FIQ 2
-#define INT_1610_McBSP2_TX 4
-#define INT_1610_McBSP2_RX 5
-#define INT_1610_DSP_MAILBOX1 10
-#define INT_1610_DSP_MAILBOX2 11
-#define INT_1610_LCD_LINE 12
-#define INT_1610_GPTIMER1 17
-#define INT_1610_GPTIMER2 18
-#define INT_1610_SSR_FIFO_0 29
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
- */
-#define INT_730_IH2_FIQ 0
-#define INT_730_IH2_IRQ 1
-#define INT_730_USB_NON_ISO 2
-#define INT_730_USB_ISO 3
-#define INT_730_ICR 4
-#define INT_730_EAC 5
-#define INT_730_GPIO_BANK1 6
-#define INT_730_GPIO_BANK2 7
-#define INT_730_GPIO_BANK3 8
-#define INT_730_McBSP2TX 10
-#define INT_730_McBSP2RX 11
-#define INT_730_McBSP2RX_OVF 12
-#define INT_730_LCD_LINE 14
-#define INT_730_GSM_PROTECT 15
-#define INT_730_TIMER3 16
-#define INT_730_GPIO_BANK5 17
-#define INT_730_GPIO_BANK6 18
-#define INT_730_SPGIO_WR 29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE 32
-
-#define INT_KEYBOARD (1 + IH2_BASE)
-#define INT_uWireTX (2 + IH2_BASE)
-#define INT_uWireRX (3 + IH2_BASE)
-#define INT_I2C (4 + IH2_BASE)
-#define INT_MPUIO (5 + IH2_BASE)
-#define INT_USB_HHC_1 (6 + IH2_BASE)
-#define INT_McBSP3TX (10 + IH2_BASE)
-#define INT_McBSP3RX (11 + IH2_BASE)
-#define INT_McBSP1TX (12 + IH2_BASE)
-#define INT_McBSP1RX (13 + IH2_BASE)
-#define INT_UART1 (14 + IH2_BASE)
-#define INT_UART2 (15 + IH2_BASE)
-#define INT_BT_MCSI1TX (16 + IH2_BASE)
-#define INT_BT_MCSI1RX (17 + IH2_BASE)
-#define INT_USB_W2FC (20 + IH2_BASE)
-#define INT_1WIRE (21 + IH2_BASE)
-#define INT_OS_TIMER (22 + IH2_BASE)
-#define INT_MMC (23 + IH2_BASE)
-#define INT_GAUGE_32K (24 + IH2_BASE)
-#define INT_RTC_TIMER (25 + IH2_BASE)
-#define INT_RTC_ALARM (26 + IH2_BASE)
-#define INT_MEM_STICK (27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU (28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC (0 + IH2_BASE)
-#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
-#define INT_1610_USB_OTG (8 + IH2_BASE)
-#define INT_1610_SoSSI (9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
-#define INT_1610_DSP_MMU (28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
-#define INT_1610_STI (32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
-#define INT_1610_GPTIMER3 (34 + IH2_BASE)
-#define INT_1610_GPTIMER4 (35 + IH2_BASE)
-#define INT_1610_GPTIMER5 (36 + IH2_BASE)
-#define INT_1610_GPTIMER6 (37 + IH2_BASE)
-#define INT_1610_GPTIMER7 (38 + IH2_BASE)
-#define INT_1610_GPTIMER8 (39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
-#define INT_1610_MMC2 (42 + IH2_BASE)
-#define INT_1610_CF (43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
-#define INT_1610_SPI (49 + IH2_BASE)
-#define INT_1610_DMA_CH6 (53 + IH2_BASE)
-#define INT_1610_DMA_CH7 (54 + IH2_BASE)
-#define INT_1610_DMA_CH8 (55 + IH2_BASE)
-#define INT_1610_DMA_CH9 (56 + IH2_BASE)
-#define INT_1610_DMA_CH10 (57 + IH2_BASE)
-#define INT_1610_DMA_CH11 (58 + IH2_BASE)
-#define INT_1610_DMA_CH12 (59 + IH2_BASE)
-#define INT_1610_DMA_CH13 (60 + IH2_BASE)
-#define INT_1610_DMA_CH14 (61 + IH2_BASE)
-#define INT_1610_DMA_CH15 (62 + IH2_BASE)
-#define INT_1610_NAND (63 + IH2_BASE)
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS (0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
-#define INT_730_CFCD (2 + IH2_BASE)
-#define INT_730_CFIREQ (3 + IH2_BASE)
-#define INT_730_I2C (4 + IH2_BASE)
-#define INT_730_PCC (5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
-#define INT_730_SPI_100K_1 (7 + IH2_BASE)
-#define INT_730_SYREN_SPI (8 + IH2_BASE)
-#define INT_730_VLYNQ (9 + IH2_BASE)
-#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
-#define INT_730_McBSP1TX (11 + IH2_BASE)
-#define INT_730_McBSP1RX (12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
-#define INT_730_MCSI (16 + IH2_BASE)
-#define INT_730_uWireTX (17 + IH2_BASE)
-#define INT_730_uWireRX (18 + IH2_BASE)
-#define INT_730_SMC_CD (19 + IH2_BASE)
-#define INT_730_SMC_IREQ (20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
-#define INT_730_TIMER32K (22 + IH2_BASE)
-#define INT_730_MMC_SDIO (23 + IH2_BASE)
-#define INT_730_UPLD (24 + IH2_BASE)
-#define INT_730_USB_HHC_1 (27 + IH2_BASE)
-#define INT_730_USB_HHC_2 (28 + IH2_BASE)
-#define INT_730_USB_GENI (29 + IH2_BASE)
-#define INT_730_USB_OTG (30 + IH2_BASE)
-#define INT_730_CAMERA_IF (31 + IH2_BASE)
-#define INT_730_RNG (32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN (34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
-#define INT_730_SHA1_MD5 (36 + IH2_BASE)
-#define INT_730_SPI_100K_2 (37 + IH2_BASE)
-#define INT_730_RNG_IDLE (38 + IH2_BASE)
-#define INT_730_MPUIO (39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_730_DMA_CH6 (53 + IH2_BASE)
-#define INT_730_DMA_CH7 (54 + IH2_BASE)
-#define INT_730_DMA_CH8 (55 + IH2_BASE)
-#define INT_730_DMA_CH9 (56 + IH2_BASE)
-#define INT_730_DMA_CH10 (57 + IH2_BASE)
-#define INT_730_DMA_CH11 (58 + IH2_BASE)
-#define INT_730_DMA_CH12 (59 + IH2_BASE)
-#define INT_730_DMA_CH13 (60 + IH2_BASE)
-#define INT_730_DMA_CH14 (61 + IH2_BASE)
-#define INT_730_DMA_CH15 (62 + IH2_BASE)
-#define INT_730_NAND (63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ 7
-#define INT_24XX_SDMA_IRQ0 12
-#define INT_24XX_SDMA_IRQ1 13
-#define INT_24XX_SDMA_IRQ2 14
-#define INT_24XX_SDMA_IRQ3 15
-#define INT_24XX_CAM_IRQ 24
-#define INT_24XX_DSS_IRQ 25
-#define INT_24XX_MAIL_U0_MPU 26
-#define INT_24XX_DSP_UMA 27
-#define INT_24XX_DSP_MMU 28
-#define INT_24XX_GPIO_BANK1 29
-#define INT_24XX_GPIO_BANK2 30
-#define INT_24XX_GPIO_BANK3 31
-#define INT_24XX_GPIO_BANK4 32
-#define INT_24XX_GPIO_BANK5 33
-#define INT_24XX_MAIL_U3_MPU 34
-#define INT_24XX_GPTIMER1 37
-#define INT_24XX_GPTIMER2 38
-#define INT_24XX_GPTIMER3 39
-#define INT_24XX_GPTIMER4 40
-#define INT_24XX_GPTIMER5 41
-#define INT_24XX_GPTIMER6 42
-#define INT_24XX_GPTIMER7 43
-#define INT_24XX_GPTIMER8 44
-#define INT_24XX_GPTIMER9 45
-#define INT_24XX_GPTIMER10 46
-#define INT_24XX_GPTIMER11 47
-#define INT_24XX_GPTIMER12 48
-#define INT_24XX_I2C1_IRQ 56
-#define INT_24XX_I2C2_IRQ 57
-#define INT_24XX_MCBSP1_IRQ_TX 59
-#define INT_24XX_MCBSP1_IRQ_RX 60
-#define INT_24XX_MCBSP2_IRQ_TX 62
-#define INT_24XX_MCBSP2_IRQ_RX 63
-#define INT_24XX_UART1_IRQ 72
-#define INT_24XX_UART2_IRQ 73
-#define INT_24XX_UART3_IRQ 74
-#define INT_24XX_USB_IRQ_GEN 75
-#define INT_24XX_USB_IRQ_NISO 76
-#define INT_24XX_USB_IRQ_ISO 77
-#define INT_24XX_USB_IRQ_HGEN 78
-#define INT_24XX_USB_IRQ_HSOF 79
-#define INT_24XX_USB_IRQ_OTG 80
-#define INT_24XX_MMC_IRQ 83
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES 192
-#define IH_GPIO_BASE (128 + IH2_BASE)
-#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS 24
-#else
-#define OMAP_FPGA_NR_IRQS 0
-#endif
-#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL4030_BASE_NR_IRQS 8
-#define TWL4030_PWR_NR_IRQS 8
-#else
-#define TWL4030_BASE_NR_IRQS 0
-#define TWL4030_PWR_NR_IRQS 0
-#endif
-#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
-#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
-#ifdef CONFIG_TWL4030_GPIO
-#define TWL4030_GPIO_NR_IRQS 18
-#else
-#define TWL4030_GPIO_NR_IRQS 0
-#endif
-#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS TWL4030_GPIO_IRQ_END
-
-#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
-
-#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
-#endif
-
-#include <asm/arch/hardware.h>
-
-#endif
diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h
deleted file mode 100644
index b7f8307..0000000
--- a/include/asm-arm/arch-omap/keypad.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/keypad.h
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-struct omap_kp_platform_data {
- int rows;
- int cols;
- int *keymap;
- unsigned int keymapsize;
- unsigned int rep:1;
- unsigned long delay;
- unsigned int dbounce:1;
- /* specific to OMAP242x*/
- unsigned int *row_gpios;
- unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0 (0 << 16)
-#define GROUP_1 (1 << 16)
-#define GROUP_2 (2 << 16)
-#define GROUP_3 (3 << 16)
-#define GROUP_MASK GROUP_3
-
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/led.h b/include/asm-arm/arch-omap/led.h
deleted file mode 100644
index f3acae2..0000000
--- a/include/asm-arm/arch-omap/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/led.h
- *
- * Copyright (C) 2006 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-
-struct omap_led_config {
- struct led_classdev cdev;
- s16 gpio;
-};
-
-struct omap_led_platform_data {
- s16 nr_leds;
- struct omap_led_config *leds;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
deleted file mode 100644
index 3da459a..0000000
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-
-#define OMAP730_MCBSP1_BASE 0xfffb1000
-#define OMAP730_MCBSP2_BASE 0xfffb1800
-
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
-
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
-
-#define OMAP24XX_MCBSP1_BASE 0x48074000
-#define OMAP24XX_MCBSP2_BASE 0x48076000
-
-#define OMAP34XX_MCBSP1_BASE 0x48074000
-#define OMAP34XX_MCBSP2_BASE 0x49022000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-#define OMAP_MAX_MCBSP_COUNT 3
-#define MAX_MCBSP_CLOCKS 3
-
-#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP OMAP_MCBSP1
-#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-
-#define OMAP_MAX_MCBSP_COUNT 2
-#define MAX_MCBSP_CLOCKS 2
-
-#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP OMAP_MCBSP2
-#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX
-
-#endif
-
-#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
-/************************** McBSP SPCR1 bit definitions ***********************/
-#define RRST 0x0001
-#define RRDY 0x0002
-#define RFULL 0x0004
-#define RSYNC_ERR 0x0008
-#define RINTM(value) ((value)<<4) /* bits 4:5 */
-#define ABIS 0x0040
-#define DXENA 0x0080
-#define CLKSTP(value) ((value)<<11) /* bits 11:12 */
-#define RJUST(value) ((value)<<13) /* bits 13:14 */
-#define DLB 0x8000
-
-/************************** McBSP SPCR2 bit definitions ***********************/
-#define XRST 0x0001
-#define XRDY 0x0002
-#define XEMPTY 0x0004
-#define XSYNC_ERR 0x0008
-#define XINTM(value) ((value)<<4) /* bits 4:5 */
-#define GRST 0x0040
-#define FRST 0x0080
-#define SOFT 0x0100
-#define FREE 0x0200
-
-/************************** McBSP PCR bit definitions *************************/
-#define CLKRP 0x0001
-#define CLKXP 0x0002
-#define FSRP 0x0004
-#define FSXP 0x0008
-#define DR_STAT 0x0010
-#define DX_STAT 0x0020
-#define CLKS_STAT 0x0040
-#define SCLKME 0x0080
-#define CLKRM 0x0100
-#define CLKXM 0x0200
-#define FSRM 0x0400
-#define FSXM 0x0800
-#define RIOEN 0x1000
-#define XIOEN 0x2000
-#define IDLE_EN 0x4000
-
-/************************** McBSP RCR1 bit definitions ************************/
-#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */
-#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */
-
-/************************** McBSP XCR1 bit definitions ************************/
-#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */
-#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */
-
-/*************************** McBSP RCR2 bit definitions ***********************/
-#define RDATDLY(value) (value) /* Bits 0:1 */
-#define RFIG 0x0004
-#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */
-#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */
-#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */
-#define RPHASE 0x8000
-
-/*************************** McBSP XCR2 bit definitions ***********************/
-#define XDATDLY(value) (value) /* Bits 0:1 */
-#define XFIG 0x0004
-#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */
-#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */
-#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */
-#define XPHASE 0x8000
-
-/************************* McBSP SRGR1 bit definitions ************************/
-#define CLKGDV(value) (value) /* Bits 0:7 */
-#define FWID(value) ((value)<<8) /* Bits 8:15 */
-
-/************************* McBSP SRGR2 bit definitions ************************/
-#define FPER(value) (value) /* Bits 0:11 */
-#define FSGM 0x1000
-#define CLKSM 0x2000
-#define CLKSP 0x4000
-#define GSYNC 0x8000
-
-/************************* McBSP MCR1 bit definitions *************************/
-#define RMCM 0x0001
-#define RCBLK(value) ((value)<<2) /* Bits 2:4 */
-#define RPABLK(value) ((value)<<5) /* Bits 5:6 */
-#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */
-
-/************************* McBSP MCR2 bit definitions *************************/
-#define XMCM(value) (value) /* Bits 0:1 */
-#define XCBLK(value) ((value)<<2) /* Bits 2:4 */
-#define XPABLK(value) ((value)<<5) /* Bits 5:6 */
-#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
-
-
-/* we don't do multichannel for now */
-struct omap_mcbsp_reg_cfg {
- u16 spcr2;
- u16 spcr1;
- u16 rcr2;
- u16 rcr1;
- u16 xcr2;
- u16 xcr1;
- u16 srgr2;
- u16 srgr1;
- u16 mcr2;
- u16 mcr1;
- u16 pcr0;
- u16 rcerc;
- u16 rcerd;
- u16 xcerc;
- u16 xcerd;
- u16 rcere;
- u16 rcerf;
- u16 xcere;
- u16 xcerf;
- u16 rcerg;
- u16 rcerh;
- u16 xcerg;
- u16 xcerh;
-};
-
-typedef enum {
- OMAP_MCBSP1 = 0,
- OMAP_MCBSP2,
- OMAP_MCBSP3,
-} omap_mcbsp_id;
-
-typedef int __bitwise omap_mcbsp_io_type_t;
-#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
-#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
-
-typedef enum {
- OMAP_MCBSP_WORD_8 = 0,
- OMAP_MCBSP_WORD_12,
- OMAP_MCBSP_WORD_16,
- OMAP_MCBSP_WORD_20,
- OMAP_MCBSP_WORD_24,
- OMAP_MCBSP_WORD_32,
-} omap_mcbsp_word_length;
-
-typedef enum {
- OMAP_MCBSP_CLK_RISING = 0,
- OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
- OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
- OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
- OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
- OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
- OMAP_MCBSP_SPI_MASTER = 0,
- OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
- omap_mcbsp_spi_mode spi_mode;
- omap_mcbsp_clk_polarity rx_clock_polarity;
- omap_mcbsp_clk_polarity tx_clock_polarity;
- omap_mcbsp_fs_polarity fsx_polarity;
- u8 clk_div;
- omap_mcbsp_clk_stp_mode clk_stp_mode;
- omap_mcbsp_word_length word_length;
-};
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
- void (*request)(unsigned int);
- void (*free)(unsigned int);
- int (*check)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
- u32 virt_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
- struct omap_mcbsp_ops *ops;
- char const *clk_name;
-};
-
-struct omap_mcbsp {
- struct device *dev;
- u32 io_base;
- u8 id;
- u8 free;
- omap_mcbsp_word_length rx_word_length;
- omap_mcbsp_word_length tx_word_length;
-
- omap_mcbsp_io_type_t io_type; /* IRQ or poll */
- /* IRQ based TX/RX */
- int rx_irq;
- int tx_irq;
-
- /* DMA stuff */
- u8 dma_rx_sync;
- short dma_rx_lch;
- u8 dma_tx_sync;
- short dma_tx_lch;
-
- /* Completion queues */
- struct completion tx_irq_completion;
- struct completion rx_irq_completion;
- struct completion tx_dma_completion;
- struct completion rx_dma_completion;
-
- /* Protect the field .free, while checking if the mcbsp is in use */
- spinlock_t lock;
- struct omap_mcbsp_platform_data *pdata;
- struct clk *clk;
-};
-
-int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
- int size);
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-int omap_mcbsp_request(unsigned int id);
-void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
-void omap_mcbsp_xmit_word(unsigned int id, u32 word);
-u32 omap_mcbsp_recv_word(unsigned int id);
-
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
-
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
-
-/* Polled read/write functions */
-int omap_mcbsp_pollread(unsigned int id, u16 * buf);
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
-
-#endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
deleted file mode 100644
index 14cba97..0000000
--- a/include/asm-arm/arch-omap/memory.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET UL(0x80000000)
-#endif
-
-/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- * on OMAP-1510 only
- */
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET UL(0x30000000)
-
-#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
-
-#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
- (dma_addr_t)virt_to_lbus(page_address(page)) : \
- (dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \
- virt_to_lbus(addr) : \
- __virt_to_bus(addr);})
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
- (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h
deleted file mode 100644
index 69ed7ee..0000000
--- a/include/asm-arm/arch-omap/menelaus.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/menelaus.h
- *
- * Functions to access Menelaus power management chip
- */
-
-#ifndef __ASM_ARCH_MENELAUS_H
-#define __ASM_ARCH_MENELAUS_H
-
-struct device;
-
-struct menelaus_platform_data {
- int (* late_init)(struct device *dev);
-};
-
-extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
- void *data);
-extern void menelaus_unregister_mmc_callback(void);
-extern int menelaus_set_mmc_opendrain(int slot, int enable);
-extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
-
-extern int menelaus_set_vmem(unsigned int mV);
-extern int menelaus_set_vio(unsigned int mV);
-extern int menelaus_set_vmmc(unsigned int mV);
-extern int menelaus_set_vaux(unsigned int mV);
-extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
-extern int menelaus_set_slot_sel(int enable);
-extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
-extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
-
-#define EN_VPLL_SLEEP (1 << 7)
-#define EN_VMMC_SLEEP (1 << 6)
-#define EN_VAUX_SLEEP (1 << 5)
-#define EN_VIO_SLEEP (1 << 4)
-#define EN_VMEM_SLEEP (1 << 3)
-#define EN_DC3_SLEEP (1 << 2)
-#define EN_DC2_SLEEP (1 << 1)
-#define EN_VC_SLEEP (1 << 0)
-
-extern int menelaus_set_regulator_sleep(int enable, u32 val);
-
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus() 1
-#else
-#define omap_has_menelaus() 0
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
deleted file mode 100644
index 7cfc5f2..0000000
--- a/include/asm-arm/arch-omap/mmc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_MMC_MAX_SLOTS 2
-
-struct omap_mmc_platform_data {
- struct omap_mmc_conf conf;
-
- /* number of slots on board */
- unsigned nr_slots:2;
-
- /* set if your board has components or wiring that limits the
- * maximum frequency on the MMC bus */
- unsigned int max_freq;
-
- /* switch the bus to a new slot */
- int (* switch_slot)(struct device *dev, int slot);
- /* initialize board-specific MMC functionality, can be NULL if
- * not supported */
- int (* init)(struct device *dev);
- void (* cleanup)(struct device *dev);
- void (* shutdown)(struct device *dev);
-
- /* To handle board related suspend/resume functionality for MMC */
- int (*suspend)(struct device *dev, int slot);
- int (*resume)(struct device *dev, int slot);
-
- struct omap_mmc_slot_data {
- int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
- int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
- int (* get_ro)(struct device *dev, int slot);
-
- /* return MMC cover switch state, can be NULL if not supported.
- *
- * possible return values:
- * 0 - open
- * 1 - closed
- */
- int (* get_cover_state)(struct device *dev, int slot);
-
- const char *name;
- u32 ocr_mask;
-
- /* Card detection IRQs */
- int card_detect_irq;
- int (* card_detect)(int irq);
-
- unsigned int ban_openended:1;
-
- } slots[OMAP_MMC_MAX_SLOTS];
-};
-
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
-
-#endif
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h
deleted file mode 100644
index f4714b5..0000000
--- a/include/asm-arm/arch-omap/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
- *
- * (c) 2005 MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <asm/arch/hardware.h>
-#define OMAP_MPU_TIMER_BASE (0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET 0x100
-
-typedef struct {
- u32 cntl; /* CNTL_TIMER, R/W */
- u32 load_tim; /* LOAD_TIM, W */
- u32 read_tim; /* READ_TIM, R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n) \
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
- (n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
- volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
- return timer->read_tim;
-}
-
-#define xip_irqpending() \
- (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime() (~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period. This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
deleted file mode 100644
index ff9a5b5..0000000
--- a/include/asm-arm/arch-omap/mux.h
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- * For example, W8_1610_MMC2_DAT0, where:
- * - W8 = ball
- * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
- * - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
- .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
- .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
- .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
- .mux_reg = OMAP730_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
- .pull_reg = OMAP730_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) \
- .mux_reg = OMAP730_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
- pull_reg, pull_bit, pull_status, \
- pu_pd_reg, pu_pd_status, debug_status) \
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG(mux_reg, mode_offset, mode) \
- PULL_REG(pull_reg, pull_bit, pull_status) \
- PU_PD_REG(pu_pd_reg, pu_pd_status) \
-},
-
-
-/*
- * OMAP730 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
- * not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- * as mux config
- */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
- pull_bit, pull_status, debug_status)\
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG_730(mux_reg, mode_offset, mode) \
- PULL_REG_730(mux_reg, pull_bit, pull_status) \
- PU_PD_REG(NA, 0) \
-},
-
-#define MUX_CFG_24XX(desc, reg_offset, mode, \
- pull_en, pull_mode, dbg) \
-{ \
- .name = desc, \
- .debug = dbg, \
- .mux_reg = reg_offset, \
- .mask = mode, \
- .pull_val = pull_en, \
- .pu_pd_val = pull_mode, \
-},
-
-
-#define PULL_DISABLED 0
-#define PULL_ENABLED 1
-
-#define PULL_DOWN 0
-#define PULL_UP 1
-
-struct pin_config {
- char *name;
- unsigned char busy;
- unsigned char debug;
-
- const char *mux_reg_name;
- const unsigned int mux_reg;
- const unsigned char mask_offset;
- const unsigned char mask;
-
- const char *pull_name;
- const unsigned int pull_reg;
- const unsigned char pull_val;
- const unsigned char pull_bit;
-
- const char *pu_pd_name;
- const unsigned int pu_pd_reg;
- const unsigned char pu_pd_val;
-};
-
-enum omap730_index {
- /* OMAP 730 keyboard */
- E2_730_KBR0,
- J7_730_KBR1,
- E1_730_KBR2,
- F3_730_KBR3,
- D2_730_KBR4,
- C2_730_KBC0,
- D3_730_KBC1,
- E4_730_KBC2,
- F4_730_KBC3,
- E3_730_KBC4,
-
- /* USB */
- AA17_730_USB_DM,
- W16_730_USB_PU_EN,
- W17_730_USB_VBUSI,
-};
-
-enum omap1xxx_index {
- /* UART1 (BT_UART_GATING)*/
- UART1_TX = 0,
- UART1_RTS,
-
- /* UART2 (COM_UART_GATING)*/
- UART2_TX,
- UART2_RX,
- UART2_CTS,
- UART2_RTS,
-
- /* UART3 (GIGA_UART_GATING) */
- UART3_TX,
- UART3_RX,
- UART3_CTS,
- UART3_RTS,
- UART3_CLKREQ,
- UART3_BCLK, /* 12MHz clock out */
- Y15_1610_UART3_RTS,
-
- /* PWT & PWL */
- PWT,
- PWL,
-
- /* USB master generic */
- R18_USB_VBUS,
- R18_1510_USB_GPIO0,
- W4_USB_PUEN,
- W4_USB_CLKO,
- W4_USB_HIGHZ,
- W4_GPIO58,
-
- /* USB1 master */
- USB1_SUSP,
- USB1_SEO,
- W13_1610_USB1_SE0,
- USB1_TXEN,
- USB1_TXD,
- USB1_VP,
- USB1_VM,
- USB1_RCV,
- USB1_SPEED,
- R13_1610_USB1_SPEED,
- R13_1710_USB1_SE0,
-
- /* USB2 master */
- USB2_SUSP,
- USB2_VP,
- USB2_TXEN,
- USB2_VM,
- USB2_RCV,
- USB2_SEO,
- USB2_TXD,
-
- /* OMAP-1510 GPIO */
- R18_1510_GPIO0,
- R19_1510_GPIO1,
- M14_1510_GPIO2,
-
- /* OMAP1610 GPIO */
- P18_1610_GPIO3,
- Y15_1610_GPIO17,
-
- /* OMAP-1710 GPIO */
- R18_1710_GPIO0,
- V2_1710_GPIO10,
- N21_1710_GPIO14,
- W15_1710_GPIO40,
-
- /* MPUIO */
- MPUIO2,
- N15_1610_MPUIO2,
- MPUIO4,
- MPUIO5,
- T20_1610_MPUIO5,
- W11_1610_MPUIO6,
- V10_1610_MPUIO7,
- W11_1610_MPUIO9,
- V10_1610_MPUIO10,
- W10_1610_MPUIO11,
- E20_1610_MPUIO13,
- U20_1610_MPUIO14,
- E19_1610_MPUIO15,
-
- /* MCBSP2 */
- MCBSP2_CLKR,
- MCBSP2_CLKX,
- MCBSP2_DR,
- MCBSP2_DX,
- MCBSP2_FSR,
- MCBSP2_FSX,
-
- /* MCBSP3 */
- MCBSP3_CLKX,
-
- /* Misc ballouts */
- BALLOUT_V8_ARMIO3,
- N20_HDQ,
-
- /* OMAP-1610 MMC2 */
- W8_1610_MMC2_DAT0,
- V8_1610_MMC2_DAT1,
- W15_1610_MMC2_DAT2,
- R10_1610_MMC2_DAT3,
- Y10_1610_MMC2_CLK,
- Y8_1610_MMC2_CMD,
- V9_1610_MMC2_CMDDIR,
- V5_1610_MMC2_DATDIR0,
- W19_1610_MMC2_DATDIR1,
- R18_1610_MMC2_CLKIN,
-
- /* OMAP-1610 External Trace Interface */
- M19_1610_ETM_PSTAT0,
- L15_1610_ETM_PSTAT1,
- L18_1610_ETM_PSTAT2,
- L19_1610_ETM_D0,
- J19_1610_ETM_D6,
- J18_1610_ETM_D7,
-
- /* OMAP16XX GPIO */
- P20_1610_GPIO4,
- V9_1610_GPIO7,
- W8_1610_GPIO9,
- N20_1610_GPIO11,
- N19_1610_GPIO13,
- P10_1610_GPIO22,
- V5_1610_GPIO24,
- AA20_1610_GPIO_41,
- W19_1610_GPIO48,
- M7_1610_GPIO62,
- V14_16XX_GPIO37,
- R9_16XX_GPIO18,
- L14_16XX_GPIO49,
-
- /* OMAP-1610 uWire */
- V19_1610_UWIRE_SCLK,
- U18_1610_UWIRE_SDI,
- W21_1610_UWIRE_SDO,
- N14_1610_UWIRE_CS0,
- P15_1610_UWIRE_CS3,
- N15_1610_UWIRE_CS1,
-
- /* OMAP-1610 SPI */
- U19_1610_SPIF_SCK,
- U18_1610_SPIF_DIN,
- P20_1610_SPIF_DIN,
- W21_1610_SPIF_DOUT,
- R18_1610_SPIF_DOUT,
- N14_1610_SPIF_CS0,
- N15_1610_SPIF_CS1,
- T19_1610_SPIF_CS2,
- P15_1610_SPIF_CS3,
-
- /* OMAP-1610 Flash */
- L3_1610_FLASH_CS2B_OE,
- M8_1610_FLASH_CS2B_WE,
-
- /* First MMC */
- MMC_CMD,
- MMC_DAT1,
- MMC_DAT2,
- MMC_DAT0,
- MMC_CLK,
- MMC_DAT3,
-
- /* OMAP-1710 MMC CMDDIR and DATDIR0 */
- M15_1710_MMC_CLKI,
- P19_1710_MMC_CMDDIR,
- P20_1710_MMC_DATDIR0,
-
- /* OMAP-1610 USB0 alternate pin configuration */
- W9_USB0_TXEN,
- AA9_USB0_VP,
- Y5_USB0_RCV,
- R9_USB0_VM,
- V6_USB0_TXD,
- W5_USB0_SE0,
- V9_USB0_SPEED,
- V9_USB0_SUSP,
-
- /* USB2 */
- W9_USB2_TXEN,
- AA9_USB2_VP,
- Y5_USB2_RCV,
- R9_USB2_VM,
- V6_USB2_TXD,
- W5_USB2_SE0,
-
- /* 16XX UART */
- R13_1610_UART1_TX,
- V14_16XX_UART1_RX,
- R14_1610_UART1_CTS,
- AA15_1610_UART1_RTS,
- R9_16XX_UART2_RX,
- L14_16XX_UART3_RX,
-
- /* I2C OMAP-1610 */
- I2C_SCL,
- I2C_SDA,
-
- /* Keypad */
- F18_1610_KBC0,
- D20_1610_KBC1,
- D19_1610_KBC2,
- E18_1610_KBC3,
- C21_1610_KBC4,
- G18_1610_KBR0,
- F19_1610_KBR1,
- H14_1610_KBR2,
- E20_1610_KBR3,
- E19_1610_KBR4,
- N19_1610_KBR5,
-
- /* Power management */
- T20_1610_LOW_PWR,
-
- /* MCLK Settings */
- V5_1710_MCLK_ON,
- V5_1710_MCLK_OFF,
- R10_1610_MCLK_ON,
- R10_1610_MCLK_OFF,
-
- /* CompactFlash controller */
- P11_1610_CF_CD2,
- R11_1610_CF_IOIS16,
- V10_1610_CF_IREQ,
- W10_1610_CF_RESET,
- W11_1610_CF_CD1,
-
- /* parallel camera */
- J15_1610_CAM_LCLK,
- J18_1610_CAM_D7,
- J19_1610_CAM_D6,
- J14_1610_CAM_D5,
- K18_1610_CAM_D4,
- K19_1610_CAM_D3,
- K15_1610_CAM_D2,
- K14_1610_CAM_D1,
- L19_1610_CAM_D0,
- L18_1610_CAM_VS,
- L15_1610_CAM_HS,
- M19_1610_CAM_RSTZ,
- Y15_1610_CAM_OUTCLK,
-
- /* serial camera */
- H19_1610_CAM_EXCLK,
- Y12_1610_CCP_CLKP,
- W13_1610_CCP_CLKM,
- W14_1610_CCP_DATAP,
- Y14_1610_CCP_DATAM,
-
-};
-
-enum omap24xx_index {
- /* 24xx I2C */
- M19_24XX_I2C1_SCL,
- L15_24XX_I2C1_SDA,
- J15_24XX_I2C2_SCL,
- H19_24XX_I2C2_SDA,
-
- /* 24xx Menelaus interrupt */
- W19_24XX_SYS_NIRQ,
-
- /* 24xx clock */
- W14_24XX_SYS_CLKOUT,
-
- /* 24xx GPMC chipselects, wait pin monitoring */
- E2_GPMC_NCS2,
- L2_GPMC_NCS7,
- L3_GPMC_WAIT0,
- N7_GPMC_WAIT1,
- M1_GPMC_WAIT2,
- P1_GPMC_WAIT3,
-
- /* 242X McBSP */
- Y15_24XX_MCBSP2_CLKX,
- R14_24XX_MCBSP2_FSX,
- W15_24XX_MCBSP2_DR,
- V15_24XX_MCBSP2_DX,
-
- /* 24xx GPIO */
- M21_242X_GPIO11,
- P21_242X_GPIO12,
- AA10_242X_GPIO13,
- AA6_242X_GPIO14,
- AA4_242X_GPIO15,
- Y11_242X_GPIO16,
- AA12_242X_GPIO17,
- AA8_242X_GPIO58,
- Y20_24XX_GPIO60,
- W4__24XX_GPIO74,
- N15_24XX_GPIO85,
- M15_24XX_GPIO92,
- P20_24XX_GPIO93,
- P18_24XX_GPIO95,
- M18_24XX_GPIO96,
- L14_24XX_GPIO97,
- J15_24XX_GPIO99,
- V14_24XX_GPIO117,
- P14_24XX_GPIO125,
-
- /* 242x DBG GPIO */
- V4_242X_GPIO49,
- W2_242X_GPIO50,
- U4_242X_GPIO51,
- V3_242X_GPIO52,
- V2_242X_GPIO53,
- V6_242X_GPIO53,
- T4_242X_GPIO54,
- Y4_242X_GPIO54,
- T3_242X_GPIO55,
- U2_242X_GPIO56,
-
- /* 24xx external DMA requests */
- AA10_242X_DMAREQ0,
- AA6_242X_DMAREQ1,
- E4_242X_DMAREQ2,
- G4_242X_DMAREQ3,
- D3_242X_DMAREQ4,
- E3_242X_DMAREQ5,
-
- /* UART3 */
- K15_24XX_UART3_TX,
- K14_24XX_UART3_RX,
-
- /* MMC/SDIO */
- G19_24XX_MMC_CLKO,
- H18_24XX_MMC_CMD,
- F20_24XX_MMC_DAT0,
- H14_24XX_MMC_DAT1,
- E19_24XX_MMC_DAT2,
- D19_24XX_MMC_DAT3,
- F19_24XX_MMC_DAT_DIR0,
- E20_24XX_MMC_DAT_DIR1,
- F18_24XX_MMC_DAT_DIR2,
- E18_24XX_MMC_DAT_DIR3,
- G18_24XX_MMC_CMD_DIR,
- H15_24XX_MMC_CLKI,
-
- /* Full speed USB */
- J20_24XX_USB0_PUEN,
- J19_24XX_USB0_VP,
- K20_24XX_USB0_VM,
- J18_24XX_USB0_RCV,
- K19_24XX_USB0_TXEN,
- J14_24XX_USB0_SE0,
- K18_24XX_USB0_DAT,
-
- N14_24XX_USB1_SE0,
- W12_24XX_USB1_SE0,
- P15_24XX_USB1_DAT,
- R13_24XX_USB1_DAT,
- W20_24XX_USB1_TXEN,
- P13_24XX_USB1_TXEN,
- V19_24XX_USB1_RCV,
- V12_24XX_USB1_RCV,
-
- AA10_24XX_USB2_SE0,
- Y11_24XX_USB2_DAT,
- AA12_24XX_USB2_TXEN,
- AA6_24XX_USB2_RCV,
- AA4_24XX_USB2_TLLSE0,
-
- /* Keypad GPIO*/
- T19_24XX_KBR0,
- R19_24XX_KBR1,
- V18_24XX_KBR2,
- M21_24XX_KBR3,
- E5__24XX_KBR4,
- M18_24XX_KBR5,
- R20_24XX_KBC0,
- M14_24XX_KBC1,
- H19_24XX_KBC2,
- V17_24XX_KBC3,
- P21_24XX_KBC4,
- L14_24XX_KBC5,
- N19_24XX_KBC6,
-
- /* 24xx Menelaus Keypad GPIO */
- B3__24XX_KBR5,
- AA4_24XX_KBC2,
- B13_24XX_KBC6,
-
- /* 2430 USB */
- AD9_2430_USB0_PUEN,
- Y11_2430_USB0_VP,
- AD7_2430_USB0_VM,
- AE7_2430_USB0_RCV,
- AD4_2430_USB0_TXEN,
- AF9_2430_USB0_SE0,
- AE6_2430_USB0_DAT,
- AD24_2430_USB1_SE0,
- AB24_2430_USB1_RCV,
- Y25_2430_USB1_TXEN,
- AA26_2430_USB1_DAT,
-
- /* 2430 HS-USB */
- AD9_2430_USB0HS_DATA3,
- Y11_2430_USB0HS_DATA4,
- AD7_2430_USB0HS_DATA5,
- AE7_2430_USB0HS_DATA6,
- AD4_2430_USB0HS_DATA2,
- AF9_2430_USB0HS_DATA0,
- AE6_2430_USB0HS_DATA1,
- AE8_2430_USB0HS_CLK,
- AD8_2430_USB0HS_DIR,
- AE5_2430_USB0HS_STP,
- AE9_2430_USB0HS_NXT,
- AC7_2430_USB0HS_DATA7,
-
- /* 2430 McBSP */
- AC10_2430_MCBSP2_FSX,
- AD16_2430_MCBSP2_CLX,
- AE13_2430_MCBSP2_DX,
- AD13_2430_MCBSP2_DR,
- AC10_2430_MCBSP2_FSX_OFF,
- AD16_2430_MCBSP2_CLX_OFF,
- AE13_2430_MCBSP2_DX_OFF,
- AD13_2430_MCBSP2_DR_OFF,
-
-};
-
-struct omap_mux_cfg {
- struct pin_config *pins;
- unsigned long size;
- int (*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h
deleted file mode 100644
index 17ae26e..0000000
--- a/include/asm-arm/arch-omap/nand.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-omap/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_nand_platform_data {
- unsigned int options;
- int cs;
- int gpio_irq;
- struct mtd_partition *parts;
- int nr_parts;
- int (*nand_setup)(void __iomem *);
- int (*dev_ready)(struct omap_nand_platform_data *);
- int dma_channel;
- void __iomem *gpmc_cs_baseaddr;
- void __iomem *gpmc_baseaddr;
-};
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h
deleted file mode 100644
index faa0ed2..0000000
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History
- * -------
- *
- * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk,
- * original version based in sa1100 driver
- * and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <asm/arch/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <asm/arch/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE (1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
- char *id; /* identification string */
- int stream_id; /* numeric identification */
- int dma_dev; /* dma number of that device */
- int *lch; /* Chain of channels this stream is linked to */
- char started; /* to store if the chain was started or not */
- int dma_q_head; /* DMA Channel Q Head */
- int dma_q_tail; /* DMA Channel Q Tail */
- char dma_q_count; /* DMA Channel Q Count */
- int active:1; /* we are using this stream for transfer now */
- int period; /* current transfer period */
- int periods; /* current count of periods registerd in the DMA engine */
- spinlock_t dma_lock; /* for locking in DMA operations */
- struct snd_pcm_substream *stream; /* the pcm stream */
- unsigned linked:1; /* dma channels linked */
- int offset; /* store start position of the last period in the alsa buffer */
- int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */
- int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
- struct snd_card *card;
- struct snd_pcm *pcm;
- long samplerate;
- struct audio_stream s[2]; /* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
- char *name;
- struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
- struct snd_pcm_hw_constraint_list *hw_constraints_rates;
- struct snd_pcm_hardware *snd_omap_alsa_playback;
- struct snd_pcm_hardware *snd_omap_alsa_capture;
- void (*codec_configure_dev)(void);
- void (*codec_set_samplerate)(long);
- void (*codec_clock_setup)(void);
- int (*codec_clock_on)(void);
- int (*codec_clock_off)(void);
- int (*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend NULL
-#define snd_omap_alsa_resume NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
deleted file mode 100644
index c575d35..0000000
--- a/include/asm-arm/arch-omap/omap1510.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE 0xE0000000
-#define OMAP1510_DSP_SIZE 0x28000
-#define OMAP1510_DSP_START 0xE0000000
-
-#define OMAP1510_DSPREG_BASE 0xE1000000
-#define OMAP1510_DSPREG_SIZE SZ_128K
-#define OMAP1510_DSPREG_START 0xE1000000
-
-#endif /* __ASM_ARCH_OMAP15XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
deleted file mode 100644
index f7f5cdf..0000000
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE 0xE0000000
-#define OMAP16XX_DSP_SIZE 0x28000
-#define OMAP16XX_DSP_START 0xE0000000
-
-#define OMAP16XX_DSPREG_BASE 0xE1000000
-#define OMAP16XX_DSPREG_SIZE SZ_128K
-#define OMAP16XX_DSPREG_START 0xE1000000
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE (0xfffe0000)
-#define OMAP_IH2_1_BASE (0xfffe0100)
-#define OMAP_IH2_2_BASE (0xfffe0200)
-#define OMAP_IH2_3_BASE (0xfffe0300)
-
-#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL 0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Maping through MPU bus */
-#define UART3_RHR (OMAP_UART3_BASE + 0)
-#define UART3_THR (OMAP_UART3_BASE + 0)
-#define UART3_DLL (OMAP_UART3_BASE + 0)
-#define UART3_IER (OMAP_UART3_BASE + 4)
-#define UART3_DLH (OMAP_UART3_BASE + 4)
-#define UART3_IIR (OMAP_UART3_BASE + 8)
-#define UART3_FCR (OMAP_UART3_BASE + 8)
-#define UART3_EFR (OMAP_UART3_BASE + 8)
-#define UART3_LCR (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1 (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2 (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR (OMAP_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)
-#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT 5
-#define WCLR_PTV_SHIFT 2
-
-#define WWPS_W_PEND_WSPR (1 << 4)
-#define WWPS_W_PEND_WTGR (1 << 3)
-#define WWPS_W_PEND_WLDR (1 << 2)
-#define WWPS_W_PEND_WCRR (1 << 1)
-#define WWPS_W_PEND_WCLR (1 << 0)
-
-#define WSPR_ENABLE_0 (0x0000bbbb)
-#define WSPR_ENABLE_1 (0x00004444)
-#define WSPR_DISABLE_0 (0x0000aaaa)
-#define WSPR_DISABLE_1 (0x00005555)
-
-/* Mailbox */
-#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
-
-#endif /* __ASM_ARCH_OMAP16XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
deleted file mode 100644
index b9fcaae..0000000
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap24xx.h
- *
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE 0x48000000
-#define L4_WK_243X_BASE 0x49000000
-#define L3_24XX_BASE 0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE 0x40000000
-#define IRQ_SIR_IRQ 0x0040
-
-#define OMAP2420_CTRL_BASE L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE 0x68008000
-
-#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE 0x6C000000
-#define OMAP243X_SDRC_BASE 0x6D000000
-#define OMAP243X_GPMC_BASE 0x6E000000
-#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE 0x58000000
-#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE 0x5C000000
-#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
-#endif /* __ASM_ARCH_OMAP24XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
deleted file mode 100644
index aa30c6d..0000000
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE 0x48000000
-#define L4_WK_34XX_BASE 0x48300000
-#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
-#define L4_PER_34XX_BASE 0x49000000
-#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
-#define L4_EMU_34XX_BASE 0x54000000
-#define L4_EMU_BASE L4_EMU_34XX_BASE
-#define L3_34XX_BASE 0x68000000
-#define L3_OMAP_BASE L3_34XX_BASE
-
-#define OMAP3430_32KSYNCT_BASE 0x48320000
-#define OMAP3430_CM_BASE 0x48004800
-#define OMAP3430_PRM_BASE 0x48306800
-#define OMAP343X_SMS_BASE 0x6C000000
-#define OMAP343X_SDRC_BASE 0x6D000000
-#define OMAP34XX_GPMC_BASE 0x6E000000
-#define OMAP343X_SCM_BASE 0x48002000
-#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE 0x48200000
-#define OMAP34XX_IVA_INTC_BASE 0x40000000
-#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
-#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
-
-
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
-#define OMAP34XX_DSP_BASE 0x58000000
-#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000)
-#endif /* __ASM_ARCH_OMAP34XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h
deleted file mode 100644
index 755b64c..0000000
--- a/include/asm-arm/arch-omap/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE 0xE0000000
-#define OMAP730_DSP_SIZE 0x50000
-#define OMAP730_DSP_START 0xE0000000
-
-#define OMAP730_DSPREG_BASE 0xE1000000
-#define OMAP730_DSPREG_SIZE SZ_128K
-#define OMAP730_DSPREG_START 0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE 0xfffe1000
-#define OMAP730_IO_CONF_0 0xfffe1070
-#define OMAP730_IO_CONF_1 0xfffe1074
-#define OMAP730_IO_CONF_2 0xfffe1078
-#define OMAP730_IO_CONF_3 0xfffe107c
-#define OMAP730_IO_CONF_4 0xfffe1080
-#define OMAP730_IO_CONF_5 0xfffe1084
-#define OMAP730_IO_CONF_6 0xfffe1088
-#define OMAP730_IO_CONF_7 0xfffe108c
-#define OMAP730_IO_CONF_8 0xfffe1090
-#define OMAP730_IO_CONF_9 0xfffe1094
-#define OMAP730_IO_CONF_10 0xfffe1098
-#define OMAP730_IO_CONF_11 0xfffe109c
-#define OMAP730_IO_CONF_12 0xfffe10a0
-#define OMAP730_IO_CONF_13 0xfffe10a4
-
-#define OMAP730_MODE_1 0xfffe1010
-#define OMAP730_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0 0xfffecc10
-#define OMAP730_FLASH_ACFG_0 0xfffecc50
-#define OMAP730_FLASH_CFG_1 0xfffecc14
-#define OMAP730_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE 0xfffbb800
-#define OMAP730_DSP_M_CTL 0xfffbb804
-#define OMAP730_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP730_H */
-
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
deleted file mode 100644
index 46d7a4f..0000000
--- a/include/asm-arm/arch-omap/omapfb.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * File: include/asm-arm/arch-omap/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
-#define OMAP_IO(num) _IO('O', num)
-
-#define OMAPFB_MIRROR OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX OMAP_IO(37)
-#define OMAPFB_VSYNC OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK 0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
-#define OMAPFB_CAPS_TEARSYNC 0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK 0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
-
-#define OMAPFB_EVENT_READY 1
-#define OMAPFB_EVENT_DISABLED 2
-
-#define OMAPFB_MEMTYPE_SDRAM 0
-#define OMAPFB_MEMTYPE_SRAM 1
-#define OMAPFB_MEMTYPE_MAX 1
-
-enum omapfb_color_format {
- OMAPFB_COLOR_RGB565 = 0,
- OMAPFB_COLOR_YUV422,
- OMAPFB_COLOR_YUV420,
- OMAPFB_COLOR_CLUT_8BPP,
- OMAPFB_COLOR_CLUT_4BPP,
- OMAPFB_COLOR_CLUT_2BPP,
- OMAPFB_COLOR_CLUT_1BPP,
- OMAPFB_COLOR_RGB444,
- OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
- __u32 out_x, out_y;
- __u32 out_width, out_height;
- __u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
-};
-
-enum omapfb_plane {
- OMAPFB_PLANE_GFX = 0,
- OMAPFB_PLANE_VID1,
- OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
- OMAPFB_CHANNEL_OUT_LCD = 0,
- OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
- __u32 pos_x;
- __u32 pos_y;
- __u8 enabled;
- __u8 channel_out;
- __u8 mirror;
- __u8 reserved1;
- __u32 out_width;
- __u32 out_height;
- __u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
- __u32 size;
- __u8 type;
- __u8 reserved[3];
-};
-
-struct omapfb_caps {
- __u32 ctrl;
- __u32 plane_color;
- __u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
- OMAPFB_COLOR_KEY_DISABLED = 0,
- OMAPFB_COLOR_KEY_GFX_DST,
- OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
- __u8 channel_out;
- __u32 background;
- __u32 trans_key;
- __u8 key_type;
-};
-
-enum omapfb_update_mode {
- OMAPFB_UPDATE_DISABLED = 0,
- OMAPFB_AUTO_UPDATE,
- OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_LCDC_INV_VSYNC 0x0001
-#define OMAP_LCDC_INV_HSYNC 0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK 0x003f
-
-#define OMAP_LCDC_PANEL_TFT 0x0100
-
-#define OMAPFB_PLANE_XRES_MIN 8
-#define OMAPFB_PLANE_YRES_MIN 8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM 1
-#else
-#define OMAPFB_PLANE_NUM 3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
- const char *name;
- int config; /* TFT/STN, signal inversion */
- int bpp; /* Pixel format in fb mem */
- int data_lines; /* Lines on LCD HW interface */
-
- int x_res, y_res;
- int pixel_clock; /* In kHz */
- int hsw; /* Horizontal synchronization
- pulse width */
- int hfp; /* Horizontal front porch */
- int hbp; /* Horizontal back porch */
- int vsw; /* Vertical synchronization
- pulse width */
- int vfp; /* Vertical front porch */
- int vbp; /* Vertical back porch */
- int acb; /* ac-bias pin frequency */
- int pcd; /* pixel clock divider.
- Obsolete use pixel_clock instead */
-
- int (*init) (struct lcd_panel *panel,
- struct omapfb_device *fbdev);
- void (*cleanup) (struct lcd_panel *panel);
- int (*enable) (struct lcd_panel *panel);
- void (*disable) (struct lcd_panel *panel);
- unsigned long (*get_caps) (struct lcd_panel *panel);
- int (*set_bklight_level)(struct lcd_panel *panel,
- unsigned int level);
- unsigned int (*get_bklight_level)(struct lcd_panel *panel);
- unsigned int (*get_bklight_max) (struct lcd_panel *panel);
- int (*run_test) (struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
- int cs_on_time;
- int cs_off_time;
- int we_on_time;
- int we_off_time;
- int re_on_time;
- int re_off_time;
- int we_cycle_time;
- int re_cycle_time;
- int cs_pulse_width;
- int access_time;
-
- int clk_div;
-
- u32 tim[5]; /* set by extif->convert_timings */
-
- int converted;
-};
-
-struct lcd_ctrl_extif {
- int (*init) (struct omapfb_device *fbdev);
- void (*cleanup) (void);
- void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div);
- unsigned long (*get_max_tx_rate)(void);
- int (*convert_timings) (struct extif_timings *timings);
- void (*set_timings) (const struct extif_timings *timings);
- void (*set_bits_per_cycle)(int bpc);
- void (*write_command) (const void *buf, unsigned int len);
- void (*read_data) (void *buf, unsigned int len);
- void (*write_data) (const void *buf, unsigned int len);
- void (*transfer_area) (int width, int height,
- void (callback)(void * data), void *data);
- int (*setup_tearsync) (unsigned pin_cnt,
- unsigned hs_pulse_time, unsigned vs_pulse_time,
- int hs_pol_inv, int vs_pol_inv, int div);
- int (*enable_tearsync) (int enable, unsigned line);
-
- unsigned long max_transmit_size;
-};
-
-struct omapfb_notifier_block {
- struct notifier_block nb;
- void *data;
- int plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
- unsigned long event,
- void *fbi);
-
-struct omapfb_mem_region {
- dma_addr_t paddr;
- void *vaddr;
- unsigned long size;
- u8 type; /* OMAPFB_PLANE_MEM_* */
- unsigned alloc:1; /* allocated by the driver */
- unsigned map:1; /* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
- int region_cnt;
- struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
- const char *name;
- void *data;
-
- int (*init) (struct omapfb_device *fbdev,
- int ext_mode,
- struct omapfb_mem_desc *req_md);
- void (*cleanup) (void);
- void (*bind_client) (struct omapfb_notifier_block *nb);
- void (*get_caps) (int plane, struct omapfb_caps *caps);
- int (*set_update_mode)(enum omapfb_update_mode mode);
- enum omapfb_update_mode (*get_update_mode)(void);
- int (*setup_plane) (int plane, int channel_out,
- unsigned long offset,
- int screen_width,
- int pos_x, int pos_y, int width,
- int height, int color_mode);
- int (*setup_mem) (int plane, size_t size,
- int mem_type, unsigned long *paddr);
- int (*mmap) (struct fb_info *info,
- struct vm_area_struct *vma);
- int (*set_scale) (int plane,
- int orig_width, int orig_height,
- int out_width, int out_height);
- int (*enable_plane) (int plane, int enable);
- int (*update_window) (struct fb_info *fbi,
- struct omapfb_update_window *win,
- void (*callback)(void *),
- void *callback_data);
- void (*sync) (void);
- void (*suspend) (void);
- void (*resume) (void);
- int (*run_test) (int test_num);
- int (*setcolreg) (u_int regno, u16 red, u16 green,
- u16 blue, u16 transp,
- int update_hw_mem);
- int (*set_color_key) (struct omapfb_color_key *ck);
- int (*get_color_key) (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
- OMAPFB_DISABLED = 0,
- OMAPFB_SUSPENDED= 99,
- OMAPFB_ACTIVE = 100
-};
-
-struct omapfb_plane_struct {
- int idx;
- struct omapfb_plane_info info;
- enum omapfb_color_format color_mode;
- struct omapfb_device *fbdev;
-};
-
-struct omapfb_device {
- int state;
- int ext_lcdc; /* Using external
- LCD controller */
- struct mutex rqueue_mutex;
-
- int palette_size;
- u32 pseudo_palette[17];
-
- struct lcd_panel *panel; /* LCD panel */
- struct lcd_ctrl *ctrl; /* LCD controller */
- struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
- struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
- interface */
- struct device *dev;
- struct fb_var_screeninfo new_var; /* for mode changes */
-
- struct omapfb_mem_desc mem_desc;
- struct fb_info *fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
- struct omap_lcd_config lcd;
- struct omapfb_mem_desc mem_desc;
- void *ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
- unsigned long event);
-extern int omapfb_register_client(struct omapfb_notifier_block *nb,
- omapfb_notifier_callback_t callback,
- void *callback_data);
-extern int omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int omapfb_update_window_async(struct fb_info *fbi,
- struct omapfb_update_window *win,
- void (*callback)(void *),
- void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h
deleted file mode 100644
index 6c959d0ce..0000000
--- a/include/asm-arm/arch-omap/onenand.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-omap/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_onenand_platform_data {
- int cs;
- int gpio_irq;
- struct mtd_partition *parts;
- int nr_parts;
- int (*onenand_setup)(void __iomem *);
- int dma_channel;
-};
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad..0000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
deleted file mode 100644
index 1458805..0000000
--- a/include/asm-arm/arch-omap/pm.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/pm.h
- *
- * Header file for OMAP Power Management Routines
- *
- * Author: MontaVista Software, Inc.
- * support@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
-
-/*
- * ----------------------------------------------------------------------------
- * Register and offset definitions to be used in PM assembler code
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00)
-#define ARM_IDLECT1_ASM_OFFSET 0x04
-#define ARM_IDLECT2_ASM_OFFSET 0x08
-
-#define TCMIF_ASM_BASE io_p2v(0xfffecc00)
-#define EMIFS_CONFIG_ASM_OFFSET 0x0c
-#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20
-
-/*
- * ----------------------------------------------------------------------------
- * Power management bitmasks
- * ----------------------------------------------------------------------------
- */
-#define IDLE_WAIT_CYCLES 0x00000fff
-#define PERIPHERAL_ENABLE 0x2
-
-#define SELF_REFRESH_MODE 0x0c000001
-#define IDLE_EMIFS_REQUEST 0xc
-#define MODEM_32K_EN 0x1
-#define PER_EN 0x1
-
-#define CPU_SUSPEND_SIZE 200
-#define ULPD_LOW_PWR_EN 0x0001
-#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010
-#define ULPD_SETUP_ANALOG_CELL_3_VAL 0
-#define ULPD_POWER_CTRL_REG_VAL 0x0219
-
-#define DSP_IDLE_DELAY 10
-#define DSP_IDLE 0x0040
-#define DSP_RST 0x0004
-#define DSP_ENABLE 0x0002
-#define SUFFICIENT_DSP_RESET_TIME 1000
-#define DEFAULT_MPUI_CONFIG 0x05cf
-#define ENABLE_XORCLK 0x2
-#define DSP_CLOCK_ENABLE 0x2000
-#define DSP_IDLE_MODE 0x2
-#define TC_IDLE_REQUEST (0x0000000c)
-
-#define IRQ_LEVEL2 (1<<0)
-#define IRQ_KEYBOARD (1<<1)
-#define IRQ_UART2 (1<<15)
-
-#define PDE_BIT 0x08
-#define PWD_EN_BIT 0x04
-#define EN_PERCK_BIT 0x04
-
-#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7
-#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5
-#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00
-#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2
-
-/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
-#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7
-#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7
-#define OMAP1610_IDLECT3_VAL 0x3f
-#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c
-#define OMAP1610_IDLECT3 0xfffece24
-#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
-
-#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
-#define OMAP730_IDLECT3_VAL 0x3f
-#define OMAP730_IDLECT3 0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
-
-#if !defined(CONFIG_ARCH_OMAP730) && \
- !defined(CONFIG_ARCH_OMAP15XX) && \
- !defined(CONFIG_ARCH_OMAP16XX) && \
- !defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
-#endif
-
-#ifndef __ASSEMBLER__
-
-#include <linux/clk.h>
-
-extern void prevent_idle_sleep(void);
-extern void allow_idle_sleep(void);
-
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
-extern void omap730_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
-
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-extern void omap_serial_wake_trigger(int enable);
-#else
-#define omap_serial_wakeup_init() {}
-#define omap_serial_wake_trigger(x) {}
-#endif /* CONFIG_OMAP_SERIAL_WAKE */
-
-#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
-#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
-#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
-
-#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
-#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
-#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
-
-#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
-#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
-#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
-
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
-
-#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
-#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
-
-#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
-#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
-/*
- * List of global OMAP registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-
-enum arm_save_state {
- ARM_SLEEP_SAVE_START = 0,
- /*
- * MPU control registers 32 bits
- */
- ARM_SLEEP_SAVE_ARM_CKCTL,
- ARM_SLEEP_SAVE_ARM_IDLECT1,
- ARM_SLEEP_SAVE_ARM_IDLECT2,
- ARM_SLEEP_SAVE_ARM_IDLECT3,
- ARM_SLEEP_SAVE_ARM_EWUPCT,
- ARM_SLEEP_SAVE_ARM_RSTCT1,
- ARM_SLEEP_SAVE_ARM_RSTCT2,
- ARM_SLEEP_SAVE_ARM_SYSST,
- ARM_SLEEP_SAVE_SIZE
-};
-
-enum dsp_save_state {
- DSP_SLEEP_SAVE_START = 0,
- /*
- * DSP registers 16 bits
- */
- DSP_SLEEP_SAVE_DSP_IDLECT2,
- DSP_SLEEP_SAVE_SIZE
-};
-
-enum ulpd_save_state {
- ULPD_SLEEP_SAVE_START = 0,
- /*
- * ULPD registers 16 bits
- */
- ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
- ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
- ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
- ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
- ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
- ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
- ULPD_SLEEP_SAVE_SIZE
-};
-
-enum mpui1510_save_state {
- MPUI1510_SLEEP_SAVE_START = 0,
- /*
- * MPUI registers 32 bits
- */
- MPUI1510_SLEEP_SAVE_MPUI_CTRL,
- MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
- MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
- MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
- MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
- MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
- MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
- MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP15XX)
- MPUI1510_SLEEP_SAVE_SIZE
-#else
- MPUI1510_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui730_save_state {
- MPUI730_SLEEP_SAVE_START = 0,
- /*
- * MPUI registers 32 bits
- */
- MPUI730_SLEEP_SAVE_MPUI_CTRL,
- MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
- MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
- MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
- MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
- MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
- MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
- MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
- MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
- MPUI730_SLEEP_SAVE_SIZE
-#else
- MPUI730_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui1610_save_state {
- MPUI1610_SLEEP_SAVE_START = 0,
- /*
- * MPUI registers 32 bits
- */
- MPUI1610_SLEEP_SAVE_MPUI_CTRL,
- MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
- MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
- MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
- MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
- MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
- MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
- MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
- MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
- MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
- MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
-#if defined(CONFIG_ARCH_OMAP16XX)
- MPUI1610_SLEEP_SAVE_SIZE
-#else
- MPUI1610_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h
deleted file mode 100644
index 7bcaf94..0000000
--- a/include/asm-arm/arch-omap/prcm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-
-#endif
-
-
-
-
-
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
deleted file mode 100644
index 673b396..0000000
--- a/include/asm-arm/arch-omap/sdrc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG 0x010
-#define SDRC_DLLA_CTRL 0x060
-#define SDRC_DLLA_STATUS 0x064
-#define SDRC_DLLB_CTRL 0x068
-#define SDRC_DLLB_STATUS 0x06C
-#define SDRC_POWER 0x070
-#define SDRC_MR_0 0x084
-#define SDRC_RFR_CTRL_0 0x0a4
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-
-#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG 0x010
-/* REVISIT: fill in other SMS registers here */
-
-#endif
diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h
deleted file mode 100644
index 79a5297..0000000
--- a/include/asm-arm/arch-omap/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/serial.h
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#if defined(CONFIG_ARCH_OMAP1)
-/* OMAP1 serial ports */
-#define OMAP_UART1_BASE 0xfffb0000
-#define OMAP_UART2_BASE 0xfffb0800
-#define OMAP_UART3_BASE 0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
-/* OMAP2 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x4806e000
-#endif
-
-#define OMAP_MAX_NR_PORTS 3
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
-
-#define is_omap_port(p) ({int __ret = 0; \
- if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
- p == IO_ADDRESS(OMAP_UART2_BASE) || \
- p == IO_ADDRESS(OMAP_UART3_BASE)) \
- __ret = 1; \
- __ret; \
- })
-
-#endif
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
deleted file mode 100644
index be59f4a..0000000
--- a/include/asm-arm/arch-omap/sram.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern int __init omap_sram_init(void);
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-#endif
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
deleted file mode 100644
index 176d9d6..0000000
--- a/include/asm-arm/arch-omap/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset() do {} while (0)
-#endif
-
-extern void omap_prcm_arch_reset(char mode);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void omap1_arch_reset(char mode)
-{
- /*
- * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
- * "Global Software Reset Affects Traffic Controller Frequency".
- */
- if (cpu_is_omap5912()) {
- omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
- DPLL_CTL);
- omap_writew(0x8, ARM_RSTCT1);
- }
-
- if (machine_is_voiceblue())
- voiceblue_reset();
- else
- omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode)
-{
- if (!cpu_is_omap24xx())
- omap1_arch_reset(mode);
- else
- omap_prcm_arch_reset(mode);
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
deleted file mode 100644
index 65a9c82..0000000
--- a/include/asm-arm/arch-omap/tc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/tc.h
- *
- * OMAP Traffic Controller
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_TC_H
-#define __ASM_ARCH_TC_H
-
-#define TCMIF_BASE 0xfffecc00
-#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00)
-#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04)
-#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG (TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20)
-#define EMIFF_MRS (TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1 (TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3 (TCMIF_BASE + 0x30)
-#define TC_ENDIANISM (TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40)
-#define EMIFS_ACS0 (TCMIF_BASE + 0x50)
-#define EMIFS_ACS1 (TCMIF_BASE + 0x54)
-#define EMIFS_ACS2 (TCMIF_BASE + 0x58)
-#define EMIFS_ACS3 (TCMIF_BASE + 0x5c)
-#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0)
-
-/* external EMIFS chipselect regions */
-#define OMAP_CS0_PHYS 0x00000000
-#define OMAP_CS0_SIZE SZ_64M
-
-#define OMAP_CS1_PHYS 0x04000000
-#define OMAP_CS1_SIZE SZ_64M
-
-#define OMAP_CS1A_PHYS OMAP_CS1_PHYS
-#define OMAP_CS1A_SIZE SZ_32M
-
-#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
-#define OMAP_CS1B_SIZE SZ_32M
-
-#define OMAP_CS2_PHYS 0x08000000
-#define OMAP_CS2_SIZE SZ_64M
-
-#define OMAP_CS2A_PHYS OMAP_CS2_PHYS
-#define OMAP_CS2A_SIZE SZ_32M
-
-#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
-#define OMAP_CS2B_SIZE SZ_32M
-
-#define OMAP_CS3_PHYS 0x0c000000
-#define OMAP_CS3_SIZE SZ_64M
-
-#ifndef __ASSEMBLER__
-
-/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_FR (1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
-#define OMAP_EMIFS_CONFIG_BM (1 << 1)
-#define OMAP_EMIFS_CONFIG_WP (1 << 0)
-
-#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
-
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear. Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? 0 : OMAP_CS3_PHYS;
-}
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* __ASM_ARCH_TC_H */
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
deleted file mode 100644
index 21f2e36..0000000
--- a/include/asm-arm/arch-omap/timex.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ)
-#else
-#define CLOCK_TICK_RATE (HZ * 100000UL)
-#endif
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
deleted file mode 100644
index aca0adf..0000000
--- a/include/asm-arm/arch-omap/uncompress.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-unsigned int system_rev;
-
-#define UART_OMAP_MDR1 0x08 /* mode definition register */
-#define OMAP_ID_730 0x355F
-#define ID_MASK 0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-
-static void putc(int c)
-{
- volatile u8 * uart = 0;
- int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
- return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
- uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
- uart = (volatile u8 *)(OMAP_UART1_BASE);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
- /* Determine which serial port to use */
- do {
- /* MMU is not on, so cpu_is_omapXXXX() won't work here */
- unsigned int omap_id = omap_get_id();
-
- if (omap_id == OMAP_ID_730)
- shift = 0;
-
- if (check_port(uart, shift))
- break;
- /* Silent boot if no serial ports are enabled. */
- return;
- } while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
-
- /*
- * Now, xmit each character
- */
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
- barrier();
- uart[UART_TX << shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
deleted file mode 100644
index ddf1861..0000000
--- a/include/asm-arm/arch-omap/usb.h
+++ /dev/null
@@ -1,141 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef __ASM_ARCH_OMAP_USB_H
-#define __ASM_ARCH_OMAP_USB_H
-
-#include <asm/arch/board.h>
-
-/*-------------------------------------------------------------------------*/
-
-#define OMAP1_OTG_BASE 0xfffb0400
-#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-
-#define OMAP2_OHCI_BASE 0x4805e000
-#define OMAP2_UDC_BASE 0x4805e200
-#define OMAP2_OTG_BASE 0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE OMAP1_OTG_BASE
-#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE OMAP2_OTG_BASE
-#define UDC_BASE OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV (OTG_BASE + 0x00)
-#define OTG_SYSCON_1 (OTG_BASE + 0x04)
-# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
-# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
-# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
-# define OTG_IDLE_EN (1 << 15)
-# define HST_IDLE_EN (1 << 14)
-# define DEV_IDLE_EN (1 << 13)
-# define OTG_RESET_DONE (1 << 2)
-# define OTG_SOFT_RESET (1 << 1)
-#define OTG_SYSCON_2 (OTG_BASE + 0x08)
-# define OTG_EN (1 << 31)
-# define USBX_SYNCHRO (1 << 30)
-# define OTG_MST16 (1 << 29)
-# define SRP_GPDATA (1 << 28)
-# define SRP_GPDVBUS (1 << 27)
-# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
-# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
-# define B_ASE_BRST(w) (((w)>>16)&0x07)
-# define SRP_DPW (1 << 14)
-# define SRP_DATA (1 << 13)
-# define SRP_VBUS (1 << 12)
-# define OTG_PADEN (1 << 10)
-# define HMC_PADEN (1 << 9)
-# define UHOST_EN (1 << 8)
-# define HMC_TLLSPEED (1 << 7)
-# define HMC_TLLATTACH (1 << 6)
-# define OTG_HMC(w) (((w)>>0)&0x3f)
-#define OTG_CTRL (OTG_BASE + 0x0c)
-# define OTG_USB2_EN (1 << 29)
-# define OTG_USB2_DP (1 << 28)
-# define OTG_USB2_DM (1 << 27)
-# define OTG_USB1_EN (1 << 26)
-# define OTG_USB1_DP (1 << 25)
-# define OTG_USB1_DM (1 << 24)
-# define OTG_USB0_EN (1 << 23)
-# define OTG_USB0_DP (1 << 22)
-# define OTG_USB0_DM (1 << 21)
-# define OTG_ASESSVLD (1 << 20)
-# define OTG_BSESSEND (1 << 19)
-# define OTG_BSESSVLD (1 << 18)
-# define OTG_VBUSVLD (1 << 17)
-# define OTG_ID (1 << 16)
-# define OTG_DRIVER_SEL (1 << 15)
-# define OTG_A_SETB_HNPEN (1 << 12)
-# define OTG_A_BUSREQ (1 << 11)
-# define OTG_B_HNPEN (1 << 9)
-# define OTG_B_BUSREQ (1 << 8)
-# define OTG_BUSDROP (1 << 7)
-# define OTG_PULLDOWN (1 << 5)
-# define OTG_PULLUP (1 << 4)
-# define OTG_DRV_VBUS (1 << 3)
-# define OTG_PD_VBUS (1 << 2)
-# define OTG_PU_VBUS (1 << 1)
-# define OTG_PU_ID (1 << 0)
-#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
-# define DRIVER_SWITCH (1 << 15)
-# define A_VBUS_ERR (1 << 13)
-# define A_REQ_TMROUT (1 << 12)
-# define A_SRP_DETECT (1 << 11)
-# define B_HNP_FAIL (1 << 10)
-# define B_SRP_TMROUT (1 << 9)
-# define B_SRP_DONE (1 << 8)
-# define B_SRP_STARTED (1 << 7)
-# define OPRT_CHG (1 << 0)
-#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
- // same bits as in IRQ_EN
-#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
-# define OTGVPD (1 << 14)
-# define OTGVPU (1 << 13)
-# define OTGPUID (1 << 12)
-# define USB2VDR (1 << 10)
-# define USB2PDEN (1 << 9)
-# define USB2PUEN (1 << 8)
-# define USB1VDR (1 << 6)
-# define USB1PDEN (1 << 5)
-# define USB1PUEN (1 << 4)
-# define USB0VDR (1 << 2)
-# define USB0PDEN (1 << 1)
-# define USB0PUEN (1 << 0)
-#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
-#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
-# define CONF_USB2_UNI_R (1 << 8)
-# define CONF_USB1_UNI_R (1 << 7)
-# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
-# define CONF_USB0_ISOLATE_R (1 << 3)
-# define CONF_USB_PWRDN_DM_R (1 << 2)
-# define CONF_USB_PWRDN_DP_R (1 << 1)
-
-/* OMAP2 */
-# define USB_UNIDIR 0x0
-# define USB_UNIDIR_TLL 0x1
-# define USB_BIDIR 0x2
-# define USB_BIDIR_TLL 0x3
-# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
-# define USBT2TLL5PI (1 << 17)
-# define USB0PUENACTLOI (1 << 16)
-# define USBSTANDBYCTRL (1 << 15)
-
-#endif /* __ASM_ARCH_OMAP_USB_H */
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h
deleted file mode 100644
index 5b8bd8d..0000000
--- a/include/asm-arm/arch-omap/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
-
diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S
deleted file mode 100644
index 4f98f3b..0000000
--- a/include/asm-arm/arch-orion5x/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/orion5x.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =ORION5X_REGS_PHYS_BASE
- ldrne \rx, =ORION5X_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h
deleted file mode 100644
index 40a8c17..0000000
--- a/include/asm-arm/arch-orion5x/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S
deleted file mode 100644
index d8ef54c..0000000
--- a/include/asm-arm/arch-orion5x/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/orion5x.h>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =MAIN_IRQ_CAUSE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0] @ main cause
- ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
- mov \irqnr, #0 @ default irqnr
- @ find cause bits that are unmasked
- ands \irqstat, \irqstat, \tmp @ clear Z flag if any
- clzne \irqnr, \irqstat @ calc irqnr
- rsbne \irqnr, \irqnr, #31
- .endm
diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h
deleted file mode 100644
index c85e498..0000000
--- a/include/asm-arm/arch-orion5x/gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern int gpio_request(unsigned pin, const char *label);
-extern void gpio_free(unsigned pin);
-extern int gpio_direction_input(unsigned pin);
-extern int gpio_direction_output(unsigned pin, int value);
-extern int gpio_get_value(unsigned pin);
-extern void gpio_set_value(unsigned pin, int value);
-extern void orion5x_gpio_set_blink(unsigned pin, int blink);
-extern void gpio_display(void); /* debug */
-
-static inline int gpio_to_irq(int pin)
-{
- return pin + IRQ_ORION5X_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
- return irq - IRQ_ORION5X_GPIO_START;
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h
deleted file mode 100644
index 5d2d8e0..0000000
--- a/include/asm-arm/arch-orion5x/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x00001000
-#define PCIBIOS_MIN_MEM 0x01000000
-#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
deleted file mode 100644
index 59f1bc9..0000000
--- a/include/asm-arm/arch-orion5x/io.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/io.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "orion5x.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
- void __iomem *retval;
- unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
- if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
- size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
- retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
- } else {
- retval = __arm_ioremap(paddr, size, mtype);
- }
-
- return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
- if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
- addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
- __iounmap(addr);
-}
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
-#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
-#define __arch_iounmap(a) __arch_iounmap(a)
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-
-/*****************************************************************************
- * Helpers to access Orion registers
- ****************************************************************************/
-/*
- * These are not preempt-safe. Locks, if needed, must be taken
- * care of by the caller.
- */
-#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r))
-#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r))
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h
deleted file mode 100644
index abdd61a..0000000
--- a/include/asm-arm/arch-orion5x/irqs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "orion5x.h" /* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION5X_BRIDGE 0
-#define IRQ_ORION5X_DOORBELL_H2C 1
-#define IRQ_ORION5X_DOORBELL_C2H 2
-#define IRQ_ORION5X_UART0 3
-#define IRQ_ORION5X_UART1 4
-#define IRQ_ORION5X_I2C 5
-#define IRQ_ORION5X_GPIO_0_7 6
-#define IRQ_ORION5X_GPIO_8_15 7
-#define IRQ_ORION5X_GPIO_16_23 8
-#define IRQ_ORION5X_GPIO_24_31 9
-#define IRQ_ORION5X_PCIE0_ERR 10
-#define IRQ_ORION5X_PCIE0_INT 11
-#define IRQ_ORION5X_USB1_CTRL 12
-#define IRQ_ORION5X_DEV_BUS_ERR 14
-#define IRQ_ORION5X_PCI_ERR 15
-#define IRQ_ORION5X_USB_BR_ERR 16
-#define IRQ_ORION5X_USB0_CTRL 17
-#define IRQ_ORION5X_ETH_RX 18
-#define IRQ_ORION5X_ETH_TX 19
-#define IRQ_ORION5X_ETH_MISC 20
-#define IRQ_ORION5X_ETH_SUM 21
-#define IRQ_ORION5X_ETH_ERR 22
-#define IRQ_ORION5X_IDMA_ERR 23
-#define IRQ_ORION5X_IDMA_0 24
-#define IRQ_ORION5X_IDMA_1 25
-#define IRQ_ORION5X_IDMA_2 26
-#define IRQ_ORION5X_IDMA_3 27
-#define IRQ_ORION5X_CESA 28
-#define IRQ_ORION5X_SATA 29
-#define IRQ_ORION5X_XOR0 30
-#define IRQ_ORION5X_XOR1 31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION5X_GPIO_START 32
-#define NR_GPIO_IRQS GPIO_MAX
-
-#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h
deleted file mode 100644
index 80053a7..0000000
--- a/include/asm-arm/arch-orion5x/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
deleted file mode 100644
index 10257f5..0000000
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/orion5x.h
- *
- * Generic definitions of Orion SoC flavors:
- * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_ORION5X_H
-#define __ASM_ARCH_ORION5X_H
-
-/*****************************************************************************
- * Orion Address Maps
- *
- * phys
- * e0000000 PCIe MEM space
- * e8000000 PCI MEM space
- * f0000000 PCIe WA space (Orion-1/Orion-NAS only)
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe I/O space
- * f2100000 PCI I/O space
- * f4000000 device bus mappings (boot)
- * fa000000 device bus mappings (cs0)
- * fa800000 device bus mappings (cs2)
- * fc000000 device bus mappings (cs0/cs1)
- *
- * virt phys size
- * fdd00000 f1000000 1M on-chip peripheral registers
- * fde00000 f2000000 1M PCIe I/O space
- * fdf00000 f2100000 1M PCI I/O space
- * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
- ****************************************************************************/
-#define ORION5X_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_VIRT_BASE 0xfdd00000
-#define ORION5X_REGS_SIZE SZ_1M
-
-#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000
-#define ORION5X_PCIE_IO_BUS_BASE 0x00000000
-#define ORION5X_PCIE_IO_SIZE SZ_1M
-
-#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE 0x00100000
-#define ORION5X_PCI_IO_SIZE SZ_1M
-
-/* Relevant only for Orion-1/Orion-NAS */
-#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
-#define ORION5X_PCIE_WA_SIZE SZ_16M
-
-#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
-#define ORION5X_PCIE_MEM_SIZE SZ_128M
-
-#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000
-#define ORION5X_PCI_MEM_SIZE SZ_128M
-
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID 0x5181
-#define MV88F5181_REV_B1 3
-#define MV88F5181L_REV_A0 8
-#define MV88F5181L_REV_A1 9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID 0x5182
-#define MV88F5182_REV_A2 2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID 0x5281
-#define MV88F5281_REV_D1 5
-#define MV88F5281_REV_D2 6
-
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
-
-#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
-#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
-
-#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x))
-
-#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
-
-#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
-
-#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x))
-
-#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010)
-#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c)
-#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4)
-#define GPIO_MAX 32
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108)
-#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110)
-#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h
deleted file mode 100644
index 3f1d1e2..0000000
--- a/include/asm-arm/arch-orion5x/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- /*
- * Enable and issue soft reset
- */
- orion5x_setbits(CPU_RESET_MASK, (1 << 2));
- orion5x_setbits(CPU_SOFT_RESET, 1);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h
deleted file mode 100644
index 31c568e..0000000
--- a/include/asm-arm/arch-orion5x/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
-#define ORION5X_TCLK 166666667
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
deleted file mode 100644
index 7548ced..0000000
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/orion5x.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
deleted file mode 100644
index 2b3061e..0000000
--- a/include/asm-arm/arch-orion5x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/vmalloc.h
- */
-
-#define VMALLOC_END 0xfd800000
diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h
deleted file mode 100644
index ce155e1..0000000
--- a/include/asm-arm/arch-pnx4008/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S
deleted file mode 100644
index 67d18a2..0000000
--- a/include/asm-arm/arch-pnx4008/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-pnx4008/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- mov \rx, #0x00090000
- addeq \rx, \rx, #0x40000000
- addne \rx, \rx, #0xf4000000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h
deleted file mode 100644
index 418f152..0000000
--- a/include/asm-arm/arch-pnx4008/dma.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/dma.h
- *
- * PNX4008 DMA header file
- *
- * Author: Vitaly Wool
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_ADDRESS 0xffffffff
-
-#define MAX_DMA_CHANNELS 8
-
-#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT (DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024)
-#define DMAC_CONFIG (DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
- WIDTH_BYTE = 0,
- WIDTH_HWORD,
- WIDTH_WORD
-};
-
-enum {
- FC_MEM2MEM_DMA,
- FC_MEM2PER_DMA,
- FC_PER2MEM_DMA,
- FC_PER2PER_DMA,
- FC_PER2PER_DPER,
- FC_MEM2PER_PER,
- FC_PER2MEM_PER,
- FC_PER2PER_SPER
-};
-
-enum {
- DMA_INT_UNKNOWN = 0,
- DMA_ERR_INT = 1,
- DMA_TC_INT = 2,
-};
-
-enum {
- DMA_BUFFER_ALLOCATED = 1,
- DMA_HAS_LL = 2,
-};
-
-enum {
- PER_CAM_DMA_1 = 0,
- PER_NDF_FLASH = 1,
- PER_MBX_SLAVE_FIFO = 2,
- PER_SPI2_REC_XMIT = 3,
- PER_MS_SD_RX_XMIT = 4,
- PER_HS_UART_1_XMIT = 5,
- PER_HS_UART_1_RX = 6,
- PER_HS_UART_2_XMIT = 7,
- PER_HS_UART_2_RX = 8,
- PER_HS_UART_7_XMIT = 9,
- PER_HS_UART_7_RX = 10,
- PER_SPI1_REC_XMIT = 11,
- PER_MLC_NDF_SREC = 12,
- PER_CAM_DMA_2 = 13,
- PER_PRNG_INFIFO = 14,
- PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
- int tc_mask;
- int cacheable;
- int bufferable;
- int priv_mode;
- int di;
- int si;
- int dest_ahb1;
- int src_ahb1;
- int dwidth;
- int swidth;
- int dbsize;
- int sbsize;
- int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
- int halt;
- int active;
- int lock;
- int itc;
- int ie;
- int flow_cntrl;
- int dest_per;
- int src_per;
-};
-
-struct pnx4008_dma_ll {
- unsigned long src_addr;
- unsigned long dest_addr;
- u32 next_dma;
- unsigned long ch_ctrl;
- struct pnx4008_dma_ll *next;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
- int is_ll;
- unsigned long src_addr;
- unsigned long dest_addr;
- unsigned long ch_ctrl;
- unsigned long ch_cfg;
- struct pnx4008_dma_ll *ll;
- u32 ll_dma;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
- void (*)(int, int, void *),
- void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
- unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
- struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
- unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
- struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
- struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
- struct pnx4008_dma_ch_ctrl *);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S
deleted file mode 100644
index f117319..0000000
--- a/include/asm-arm/arch-pnx4008/entry-macro.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE 0xF0000000
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK 0x00
-#define INTRC_RAW_STAT 0x04
-#define INTRC_STAT 0x08
-#define INTRC_POLAR 0x0C
-#define INTRC_ACT_TYPE 0x10
-#define INTRC_TYPE 0x14
-
-#define SIC1_BASE_INT 32
-#define SIC2_BASE_INT 64
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
- ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
- ldr \irqstat, [\base, #INTRC_STAT]
-
- cmp \irqstat,#1<<16
- movhs \irqnr,#16
- movlo \irqnr,#0
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
- teq \irqstat,#0
- beq 1003f
-
-/* and now check for extended IRQ reasons */
- cmp \irqnr,#1
- bls 1003f
- cmp \irqnr,#30
- blo 1002f
-
-/* IRQ 31,30 : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- moveq \irqnr,#SIC1_BASE_INT
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- movne \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- and \irqstat,\irqstat,\tmp
- b 1004f
-
-1003:
-/* IRQ 1,0 : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number */
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- movne \irqnr,#SIC1_BASE_INT
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- moveq \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- bic \irqstat,\irqstat,\tmp
-
-1004:
-
- cmp \irqstat,#1<<16
- addhs \irqnr,\irqnr,#16
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
- teq \irqstat,#0
-1003:
- .endm
-
-
- .macro irq_prio_table
- .endm
-
-
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
deleted file mode 100644
index d01bf83..0000000
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/gpio.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN (0)
-#define GPIO_OUT (0x100)
-#define GPIO_BID (0x200)
-#define GPIO_RAM (0x300)
-#define GPIO_MUX (0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00 (GPIO_IN | 0)
-#define GPI_01 (GPIO_IN | 1)
-#define GPI_02 (GPIO_IN | 2)
-#define GPI_03 (GPIO_IN | 3)
-#define GPI_04 (GPIO_IN | 4)
-#define GPI_05 (GPIO_IN | 5)
-#define GPI_06 (GPIO_IN | 6)
-#define GPI_07 (GPIO_IN | 7)
-#define GPI_08 (GPIO_IN | 8)
-#define GPI_09 (GPIO_IN | 9)
-#define U1_RX (GPIO_IN | 15)
-#define U2_HTCS (GPIO_IN | 16)
-#define U2_RX (GPIO_IN | 17)
-#define U3_RX (GPIO_IN | 18)
-#define U4_RX (GPIO_IN | 19)
-#define U5_RX (GPIO_IN | 20)
-#define U6_IRRX (GPIO_IN | 21)
-#define U7_HCTS (GPIO_IN | 22)
-#define U7_RX (GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN (GPIO_IN | 25)
-#define DISP_SYNC (GPIO_IN | 26)
-#define SPI2_DATIN (GPIO_IN | 27)
-#define GPI_11 (GPIO_IN | 28)
-
-#define GPIO_IN_MASK 0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00 (GPIO_OUT | 0)
-#define GPO_01 (GPIO_OUT | 1)
-#define GPO_02 (GPIO_OUT | 2)
-#define GPO_03 (GPIO_OUT | 3)
-#define GPO_04 (GPIO_OUT | 4)
-#define GPO_05 (GPIO_OUT | 5)
-#define GPO_06 (GPIO_OUT | 6)
-#define GPO_07 (GPIO_OUT | 7)
-#define GPO_08 (GPIO_OUT | 8)
-#define GPO_09 (GPIO_OUT | 9)
-#define GPO_10 (GPIO_OUT | 10)
-#define GPO_11 (GPIO_OUT | 11)
-#define GPO_12 (GPIO_OUT | 12)
-#define GPO_13 (GPIO_OUT | 13)
-#define GPO_14 (GPIO_OUT | 14)
-#define GPO_15 (GPIO_OUT | 15)
-#define GPO_16 (GPIO_OUT | 16)
-#define GPO_17 (GPIO_OUT | 17)
-#define GPO_18 (GPIO_OUT | 18)
-#define GPO_19 (GPIO_OUT | 19)
-#define GPO_20 (GPIO_OUT | 20)
-#define GPO_21 (GPIO_OUT | 21)
-#define GPO_22 (GPIO_OUT | 22)
-#define GPO_23 (GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK 0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19 (GPIO_RAM | 0)
-#define RAM_D20 (GPIO_RAM | 1)
-#define RAM_D21 (GPIO_RAM | 2)
-#define RAM_D22 (GPIO_RAM | 3)
-#define RAM_D23 (GPIO_RAM | 4)
-#define RAM_D24 (GPIO_RAM | 5)
-#define RAM_D25 (GPIO_RAM | 6)
-#define RAM_D26 (GPIO_RAM | 7)
-#define RAM_D27 (GPIO_RAM | 8)
-#define RAM_D28 (GPIO_RAM | 9)
-#define RAM_D29 (GPIO_RAM | 10)
-#define RAM_D30 (GPIO_RAM | 11)
-#define RAM_D31 (GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK 0x1fff
-
-/* I/O pins */
-#define GPIO_00 (GPIO_BID | 25)
-#define GPIO_01 (GPIO_BID | 26)
-#define GPIO_02 (GPIO_BID | 27)
-#define GPIO_03 (GPIO_BID | 28)
-#define GPIO_04 (GPIO_BID | 29)
-#define GPIO_05 (GPIO_BID | 30)
-
-#define GPIO_BID_MASK 0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK 0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-#define SE_USB_OTG_ATX_INT_N 19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT 17
-#define SE_KEY_IRQ 16
-#define SE_DSP_SLAVEPORT_INT 15
-#define SE_DSP_GPIO1_INT 14
-#define SE_DSP_GPIO0_INT 13
-#define SE_DSP_AHB_INT 12
-/*11-6 unused*/
-#define SE_GPIO_05_INT 5
-#define SE_GPIO_04_INT 4
-#define SE_GPIO_03_INT 3
-#define SE_GPIO_02_INT 2
-#define SE_GPIO_01_INT 1
-#define SE_GPIO_00_INT 0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
- __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif /* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h
deleted file mode 100644
index a441039..0000000
--- a/include/asm-arm/arch-pnx4008/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE 0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h
deleted file mode 100644
index 29ee439..0000000
--- a/include/asm-arm/arch-pnx4008/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-
-/*
- * include/asm-arm/arch-pnx4008/io.h
- *
- * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h
deleted file mode 100644
index fabff5d..0000000
--- a/include/asm-arm/arch-pnx4008/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h
deleted file mode 100644
index a25d18f..0000000
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS 96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT 64
-
-#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
-#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
-#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
-#define GPI_06_INT 92
-#define GPI_05_INT 91
-#define GPI_04_INT 90
-#define GPI_03_INT 89
-#define GPI_02_INT 88
-#define GPI_01_INT 87
-#define GPI_00_INT 86
-#define BT_CLKREQ_INT 85
-#define SPI1_DATIN_INT 84
-#define U5_RX_INT 83
-#define SDIO_INT_N 82
-#define CAM_HS_INT 81
-#define CAM_VS_INT 80
-#define GPI_07_INT 79
-#define DISP_SYNC_INT 78
-#define DSP_INT8 77
-#define U7_HCTS_INT 76
-#define GPI_10_INT 75
-#define GPI_09_INT 74
-#define GPI_08_INT 73
-#define DSP_INT7 72
-#define U2_HCTS_INT 71
-#define SPI2_DATIN_INT 70
-#define GPIO_05_INT 69
-#define GPIO_04_INT 68
-#define GPIO_03_INT 67
-#define GPIO_02_INT 66
-#define GPIO_01_INT 65
-#define GPIO_00_INT 64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT 32
-
-#define USB_I2C_INT 63
-#define USB_DEV_HP_INT 62
-#define USB_DEV_LP_INT 61
-#define USB_DEV_DMA_INT 60
-#define USB_HOST_INT 59
-#define USB_OTG_ATX_INT_N 58
-#define USB_OTG_TIMER_INT 57
-#define SW_INT 56
-#define SPI1_INT 55
-#define KEY_IRQ 54
-#define DSP_M_INT 53
-#define RTC_INT 52
-#define I2C_1_INT 51
-#define I2C_2_INT 50
-#define PLL1_LOCK_INT 49
-#define PLL2_LOCK_INT 48
-#define PLL3_LOCK_INT 47
-#define PLL4_LOCK_INT 46
-#define PLL5_LOCK_INT 45
-#define SPI2_INT 44
-#define DSP_INT1 43
-#define DSP_INT2 42
-#define DSP_TDM_INT2 41
-#define TS_AUX_INT 40
-#define TS_IRQ 39
-#define TS_P_INT 38
-#define UOUT1_TO_PAD_INT 37
-#define GPI_11_INT 36
-#define DSP_INT4 35
-#define JTAG_COMM_RX_INT 34
-#define JTAG_COMM_TX_INT 33
-#define DSP_INT3 32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT 0
-
-#define SUB2_FIQ_N 31 /*active low */
-#define SUB1_FIQ_N 30 /*active low */
-#define JPEG_INT 29
-#define DMA_INT 28
-#define MSTIMER_INT 27
-#define IIR1_INT 26
-#define IIR2_INT 25
-#define IIR7_INT 24
-#define DSP_TDM_INT0 23
-#define DSP_TDM_INT1 22
-#define DSP_P_INT 21
-#define DSP_INT0 20
-#define DUM_INT 19
-#define UOUT0_TO_PAD_INT 18
-#define MP4_ENC_INT 17
-#define MP4_DEC_INT 16
-#define SD0_INT 15
-#define MBX_INT 14
-#define SD1_INT 13
-#define MS_INT_N 12
-#define FLASH_INT 11 /*NAND*/
-#define IIR6_INT 10
-#define IIR5_INT 9
-#define IIR4_INT 8
-#define IIR3_INT 7
-#define WATCH_INT 6
-#define HSTIMER_INT 5
-#define ARCH_TIMER_IRQ HSTIMER_INT
-#define CAM_INT 4
-#define PRNG_INT 3
-#define CRYPTO_INT 2
-#define SUB2_IRQ_N 1 /*active low */
-#define SUB1_IRQ_N 0 /*active low */
-
-#define PNX4008_IRQ_TYPES \
-{ /*IRQ #'s: */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h
deleted file mode 100644
index 0d8268a..0000000
--- a/include/asm-arm/arch-pnx4008/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h
deleted file mode 100644
index 95d5f54..0000000
--- a/include/asm-arm/arch-pnx4008/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/param.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define HZ 100
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h
deleted file mode 100644
index 2613c7c..0000000
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE 0x08000000
-#define PNX4008_IRAM_SIZE 0x00010000
-#define PNX4008_YUV_SLAVE_BASE 0x10000000
-#define PNX4008_DUM_SLAVE_BASE 0x18000000
-#define PNX4008_NDF_FLASH_BASE 0x20020000
-#define PNX4008_SPI1_BASE 0x20088000
-#define PNX4008_SPI2_BASE 0x20090000
-#define PNX4008_SD_CONFIG_BASE 0x20098000
-#define PNX4008_FLASH_DATA 0x200B0000
-#define PNX4008_MLC_FLASH_BASE 0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE 0x300A0000
-#define PNX4008_DMA_CONFIG_BASE 0x31000000
-#define PNX4008_USB_CONFIG_BASE 0x31020000
-#define PNX4008_SDRAM_CFG_BASE 0x31080000
-#define PNX4008_AHB2FAB_BASE 0x40000000
-#define PNX4008_PWRMAN_BASE 0x40004000
-#define PNX4008_INTCTRLMIC_BASE 0x40008000
-#define PNX4008_INTCTRLSIC1_BASE 0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE 0x40010000
-#define PNX4008_HSUART1_BASE 0x40014000
-#define PNX4008_HSUART2_BASE 0x40018000
-#define PNX4008_HSUART7_BASE 0x4001C000
-#define PNX4008_RTC_BASE 0x40024000
-#define PNX4008_PIO_BASE 0x40028000
-#define PNX4008_MSTIMER_BASE 0x40034000
-#define PNX4008_HSTIMER_BASE 0x40038000
-#define PNX4008_WDOG_BASE 0x4003C000
-#define PNX4008_DEBUG_BASE 0x40040000
-#define PNX4008_TOUCH1_BASE 0x40048000
-#define PNX4008_KEYSCAN_BASE 0x40050000
-#define PNX4008_UARTCTRL_BASE 0x40054000
-#define PNX4008_PWM_BASE 0x4005C000
-#define PNX4008_UART3_BASE 0x40080000
-#define PNX4008_UART4_BASE 0x40088000
-#define PNX4008_UART5_BASE 0x40090000
-#define PNX4008_UART6_BASE 0x40098000
-#define PNX4008_I2C1_BASE 0x400A0000
-#define PNX4008_I2C2_BASE 0x400A8000
-#define PNX4008_MAGICGATE_BASE 0x400B0000
-#define PNX4008_DUMCONF_BASE 0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE 0x400BC000
-#define PNX4008_DSP_BASE 0x400C0000
-#define PNX4008_PROFCOUNTER_BASE 0x400C8000
-#define PNX4008_CRYPTO_BASE 0x400D0000
-#define PNX4008_CAMIFCONF_BASE 0x400D8000
-#define PNX4008_YUV2RGB_BASE 0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE 0x400E8000
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
deleted file mode 100644
index bac1634c..0000000
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_PNX4008_PM_H */
diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h
deleted file mode 100644
index 17f9d7f..0000000
--- a/include/asm-arm/arch-pnx4008/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h
deleted file mode 100644
index f22ee24..0000000
--- a/include/asm-arm/arch-pnx4008/timex.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#define CLOCK_TICK_RATE 1000000
-
-#define TICKS2USECS(x) (x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT 1
-#define RESET_COUNT0 (1<<1)
-#define STOP_COUNT0 (1<<2)
-#define MR1_INT (1<<3)
-#define RESET_COUNT1 (1<<4)
-#define STOP_COUNT1 (1<<5)
-#define MR2_INT (1<<6)
-#define RESET_COUNT2 (1<<7)
-#define STOP_COUNT2 (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB 1
-#define RESET_COUNT (1<<1)
-#define DEBUG_EN (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT 1
-#define MATCH1_INT (1<<1)
-#define MATCH2_INT (1<<2)
-#define RTC_TICK0 (1<<4)
-#define RTC_TICK1 (1<<5)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h
deleted file mode 100644
index 8fa4d24..0000000
--- a/include/asm-arm/arch-pnx4008/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
- while (UART5_FR & (1 << 5))
- barrier();
-
- UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h
deleted file mode 100644
index 140d925..0000000
--- a/include/asm-arm/arch-pnx4008/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
deleted file mode 100644
index 9012cbc..0000000
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-pxa/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x40000000 @ physical
- movne \rx, #io_p2v(0x40000000) @ virtual
- orr \rx, \rx, #0x00100000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
deleted file mode 100644
index dbe110e..0000000
--- a/include/asm-arm/arch-pxa/dma.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/dma.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
- volatile u32 ddadr; /* Points to the next descriptor + flags */
- volatile u32 dsadr; /* DSADR value for the current transfer */
- volatile u32 dtadr; /* DTADR value for the current transfer */
- volatile u32 dcmd; /* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK 1
-#endif
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
- pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data);
-
-void pxa_free_dma (int dma_ch);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
deleted file mode 100644
index 897d164..0000000
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
- mov \tmp, \tmp, lsr #13
- and \tmp, \tmp, #0x7 @ Core G
- cmp \tmp, #1
- bhi 1004f
-
- mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
- add \base, \base, #0x00d00000
- ldr \irqstat, [\base, #0] @ ICIP
- ldr \irqnr, [\base, #4] @ ICMR
- b 1002f
-
-1004:
- mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
- mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
- ands \irqnr, \irqstat, \irqnr
- beq 1003f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- add \irqnr, \irqnr, #32
- b 1001f
-1003:
- mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
- mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
-1002:
- ands \irqnr, \irqstat, \irqnr
- beq 1001f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
-1001:
- .endm
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
deleted file mode 100644
index 2c1e3d8..0000000
--- a/include/asm-arm/arch-pxa/gpio.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-
-#include <asm-generic/gpio.h>
-
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
-#define NR_BUILTIN_GPIO 128
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
- return GPLR(gpio) & GPIO_bit(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
- if (value)
- GPSR(gpio) = GPIO_bit(gpio);
- else
- GPCR(gpio) = GPIO_bit(gpio);
- } else {
- __gpio_set_value(gpio, value);
- }
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
-#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h
deleted file mode 100644
index 6fa85c4..0000000
--- a/include/asm-arm/arch-pxa/gumstix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* BTRESET - Reset line to Bluetooth module, active low signal. */
-#define GPIO_GUMSTIX_BTRESET 7
-#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT)
-
-
-/*
-GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
-this moves to GPIO17 and GPIO37. */
-
-/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
-has detected a cable insertion; driven low otherwise. */
-
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn 81
-#define GPIO_GUMSTIX_USB_GPIOx 83
-
-#else
-
-#define GPIO_GUMSTIX_USB_GPIOn 35
-#define GPIO_GUMSTIX_USB_GPIOx 41
-
-#endif
-
-/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
-
-#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
-#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
-#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
-
-/*
- * SD/MMC definitions
- */
-#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */
-#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
-
-/*
- * SMC Ethernet definitions
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-#define GPIO_GUMSTIX_ETH0_RST 80
-#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-#define GPIO_GUMSTIX_ETH1_RST 52
-#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-
-#define GPIO_GUMSTIX_ETH0 36
-#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
-#define GPIO_GUMSTIX_ETH1 27
-#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
-
-
-/* CF reset line */
-#define GPIO8_RESET 8
-
-/* CF slot 0 */
-#define GPIO4_nBVD1 4
-#define GPIO4_nSTSCHG GPIO4_nBVD1
-#define GPIO11_nCD 11
-#define GPIO26_PRDY_nBSY 26
-#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY)
-
-/* CF slot 1 */
-#define GPIO18_nBVD1 18
-#define GPIO18_nSTSCHG GPIO18_nBVD1
-#define GPIO36_nCD 36
-#define GPIO27_PRDY_nBSY 27
-#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY)
-
-/* CF GPIO line modes */
-#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
-#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT)
-#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN)
-#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN)
-#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
-#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
-#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
deleted file mode 100644
index 979a456..0000000
--- a/include/asm-arm/arch-pxa/hardware.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/hardware.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE 0
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0 0xff000000
-#define UNCACHED_ADDR UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
- especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y) \
- (*(volatile u32 *)((u32)&__REG(x) + (y)))
-
-# define __PREG(x) (io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xf3f; \
- _id == 0x212; \
- })
-
-#define __cpu_is_pxa255(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0; \
- })
-
-#define __cpu_is_pxa25x(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0 || _id == 0x290; \
- })
-#else
-#define __cpu_is_pxa21x(id) (0)
-#define __cpu_is_pxa255(id) (0)
-#define __cpu_is_pxa25x(id) (0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x411; \
- })
-#else
-#define __cpu_is_pxa27x(id) (0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x688; \
- })
-#else
-#define __cpu_is_pxa300(id) (0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x689; \
- })
-#else
-#define __cpu_is_pxa310(id) (0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x603 || _id == 0x682; \
- })
-#else
-#define __cpu_is_pxa320(id) (0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683; \
- })
-#else
-#define __cpu_is_pxa930(id) (0)
-#endif
-
-#define cpu_is_pxa21x() \
- ({ \
- __cpu_is_pxa21x(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa255() \
- ({ \
- __cpu_is_pxa255(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa25x() \
- ({ \
- __cpu_is_pxa25x(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa27x() \
- ({ \
- __cpu_is_pxa27x(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa300() \
- ({ \
- __cpu_is_pxa300(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa310() \
- ({ \
- __cpu_is_pxa310(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa320() \
- ({ \
- __cpu_is_pxa320(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa930() \
- ({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa930(id); \
- })
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
- */
-#define __cpu_is_pxa2xx(id) \
- ({ \
- unsigned int _id = (id) >> 13 & 0x7; \
- _id <= 0x2; \
- })
-
-#define __cpu_is_pxa3xx(id) \
- ({ \
- unsigned int _id = (id) >> 13 & 0x7; \
- _id == 0x3; \
- })
-
-#define cpu_is_pxa2xx() \
- ({ \
- __cpu_is_pxa2xx(read_cpuid_id()); \
- })
-
-#define cpu_is_pxa3xx() \
- ({ \
- __cpu_is_pxa3xx(read_cpuid_id()); \
- })
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-/*
- * register GPIO as reset generator
- */
-extern int init_gpio_reset(int gpio);
-
-#endif
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO 0
-#define PCIBIOS_MIN_MEM 0
-#define pcibios_assign_all_busses() 1
-#endif
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
deleted file mode 100644
index 21aa8ac..0000000
--- a/include/asm-arm/arch-pxa/idp.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/idp.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- * Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- * <http://www.vibren.com> <http://bec-systems.com>
- * Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-
-#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS)
-#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT (0xf0000000)
-#define IDP_COREVOLT_SIZE (1*1024*1024)
-
-#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE (1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-# define __CPLD_REG(x) CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0 (1 << 0)
-#define PCC0_PWR1 (1 << 1)
-#define PCC0_PWR2 (1 << 2)
-#define PCC0_PWR3 (1 << 3)
-#define PCC1_PWR0 (1 << 4)
-#define PCC1_PWR1 (1 << 5)
-#define PCC1_PWR2 (1 << 6)
-#define PCC1_PWR3 (1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET (1 << 6)
-#define PCC1_RESET (1 << 7)
-#define PCC0_ENABLE (1 << 0)
-#define PCC1_ENABLE (1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT (1 << 7) // 7-4 read as low true
-#define _PCC_RESET (1 << 6)
-#define _PCC_IRQ (1 << 5)
-#define _PCC_INPACK (1 << 4)
-#define PCC_BVD2 (1 << 3)
-#define PCC_BVD1 (1 << 2)
-#define PCC_VS2 (1 << 1)
-#define PCC_VS1 (1 << 0)
-
-#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ IRQ_GPIO(5)
-#define IDE_IRQ IRQ_GPIO(21)
-
-#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT IRQ_GPIO(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED (1<<5)
-#define IDP_BUSY_LED (1<<6)
-
-#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS 7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS 14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US 100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
- IDP_CPLD_KB_COL_LOW = outputs;\
- IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
- inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
deleted file mode 100644
index af34e0f..0000000
--- a/include/asm-arm/arch-pxa/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
deleted file mode 100644
index 9413121..0000000
--- a/include/asm-arm/arch-pxa/irqs.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/irqs.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define PXA_IRQ(x) (x)
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
-#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
-#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */
-#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
-#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */
-#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
-#endif
-
-#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
-#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
-#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */
-#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
-#define IRQ_USB PXA_IRQ(11) /* USB Service */
-#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
-#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */
-#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
-#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */
-#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
-#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
-#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
-#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
-#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
-#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
-#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */
-#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */
-#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */
-#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */
-#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */
-#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */
-#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */
-#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
-#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
-#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
-#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
-#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
-#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
-#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
-#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
-#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
-#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
-#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
-#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
-#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
-#endif
-
-#define PXA_GPIO_IRQ_BASE (64)
-#define PXA_GPIO_IRQ_NUM (128)
-
-#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-
-#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
-/*
- * The next 16 interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
- */
-#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
-
-#define IRQ_SA1111_START (IRQ_BOARD_END)
-#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
-#define SSPXMTINT (IRQ_BOARD_END + 24)
-#define SSPRCVINT (IRQ_BOARD_END + 25)
-#define SSPROR (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
-#define AUDTFSR (IRQ_BOARD_END + 36)
-#define AUDRFSR (IRQ_BOARD_END + 37)
-#define AUDTUR (IRQ_BOARD_END + 38)
-#define AUDROR (IRQ_BOARD_END + 39)
-#define AUDDTS (IRQ_BOARD_END + 40)
-#define AUDRDD (IRQ_BOARD_END + 41)
-#define AUDSTO (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR (IRQ_BOARD_END + 43)
-#define IRQ_HCIM (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
- defined(CONFIG_MACH_LOGICPD_PXA270) || \
- defined(CONFIG_MACH_TOSA) || \
- defined(CONFIG_MACH_MAINSTONE) || \
- defined(CONFIG_MACH_PCM027) || \
- defined(CONFIG_MACH_MAGICIAN)
-#define NR_IRQS (IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS (IRQ_BOARD_START + 32)
-#else
-#define NR_IRQS (IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs. Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
-#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
-#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
-#define LPD270_AC97_IRQ LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
-
-/* ITE8152 irqs */
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT 9
-#define IT8152_LP_IRQ_COUNT 16
-#define IT8152_PD_IRQ_COUNT 15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h
deleted file mode 100644
index 501d240..0000000
--- a/include/asm-arm/arch-pxa/lpd270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/lpd270.h
- *
- * Author: Lennert Buytenhek
- * Created: Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT 0xf0000000
-#define LPD270_CPLD_SIZE 0x00100000
-
-#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers */
-#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
-#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
-#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h
deleted file mode 100644
index 11ee735..0000000
--- a/include/asm-arm/arch-pxa/lubbock.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/lubbock.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT (0xf0000000)
-#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x)))
-#else
-# define __LUB_REG(x) LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h
deleted file mode 100644
index 169b374..0000000
--- a/include/asm-arm/arch-pxa/magician.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <asm/arch/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER 0
-#define GPIO9_MAGICIAN_UNKNOWN 9
-#define GPIO10_MAGICIAN_GSM_IRQ 10
-#define GPIO11_MAGICIAN_GSM_OUT1 11
-#define GPIO13_MAGICIAN_CPLD_IRQ 13
-#define GPIO18_MAGICIAN_UNKNOWN 18
-#define GPIO22_MAGICIAN_VIBRA_EN 22
-#define GPIO26_MAGICIAN_GSM_POWER 26
-#define GPIO27_MAGICIAN_USBC_PUEN 27
-#define GPIO30_MAGICIAN_nCHARGE_EN 30
-#define GPIO37_MAGICIAN_KEY_HANGUP 37
-#define GPIO38_MAGICIAN_KEY_CONTACTS 38
-#define GPIO40_MAGICIAN_GSM_OUT2 40
-#define GPIO48_MAGICIAN_UNKNOWN 48
-#define GPIO56_MAGICIAN_UNKNOWN 56
-#define GPIO57_MAGICIAN_CAM_RESET 57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER 75
-#define GPIO83_MAGICIAN_nIR_EN 83
-#define GPIO86_MAGICIAN_GSM_RESET 86
-#define GPIO87_MAGICIAN_GSM_SELECT 87
-#define GPIO90_MAGICIAN_KEY_CALENDAR 90
-#define GPIO91_MAGICIAN_KEY_CAMERA 91
-#define GPIO93_MAGICIAN_KEY_UP 93
-#define GPIO94_MAGICIAN_KEY_DOWN 94
-#define GPIO95_MAGICIAN_KEY_LEFT 95
-#define GPIO96_MAGICIAN_KEY_RIGHT 96
-#define GPIO97_MAGICIAN_KEY_ENTER 97
-#define GPIO98_MAGICIAN_KEY_RECORD 98
-#define GPIO99_MAGICIAN_HEADPHONE_IN 99
-#define GPIO100_MAGICIAN_KEY_VOL_UP 100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
-#define GPIO102_MAGICIAN_KEY_PHONE 102
-#define GPIO103_MAGICIAN_LED_KP 103
-#define GPIO104_MAGICIAN_LCD_POWER_1 104
-#define GPIO105_MAGICIAN_LCD_POWER_2 105
-#define GPIO106_MAGICIAN_LCD_POWER_3 106
-#define GPIO107_MAGICIAN_DS1WM_IRQ 107
-#define GPIO108_MAGICIAN_GSM_READY 108
-#define GPIO114_MAGICIAN_UNKNOWN 114
-#define GPIO115_MAGICIAN_nPEN_IRQ 115
-#define GPIO116_MAGICIAN_nCAM_EN 116
-#define GPIO119_MAGICIAN_UNKNOWN 119
-#define GPIO120_MAGICIAN_UNKNOWN 120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */
-#define MAGICIAN_EGPIO(reg,bit) \
- (MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h
deleted file mode 100644
index 14c862a..0000000
--- a/include/asm-arm/arch-pxa/mainstone.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mainstone.h
- *
- * Author: Nicolas Pitre
- * Created: Nov 14, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#define MST_ETH_PHYS PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS PXA_CS2_PHYS
-#define MST_FPGA_VIRT (0xf0000000)
-#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x) MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1 __MST_REG(0x08000010)
-#define MST_LEDDAT2 __MST_REG(0x08000014)
-#define MST_LEDCTRL __MST_REG(0x08000040)
-#define MST_GPSWR __MST_REG(0x08000060)
-#define MST_MSCWR1 __MST_REG(0x08000080)
-#define MST_MSCWR2 __MST_REG(0x08000084)
-#define MST_MSCWR3 __MST_REG(0x08000088)
-#define MST_MSCRD __MST_REG(0x08000090)
-#define MST_INTMSKENA __MST_REG(0x080000c0)
-#define MST_INTSETCLR __MST_REG(0x080000d0)
-#define MST_PCMCIA0 __MST_REG(0x080000e0)
-#define MST_PCMCIA1 __MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */
-#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */
-#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */
-#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */
-#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */
-#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */
-#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */
-#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
-#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */
-#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */
-#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */
-#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */
-#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */
-#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
deleted file mode 100644
index bee81d6..0000000
--- a/include/asm-arm/arch-pxa/memory.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/memory.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0xa0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff
- * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff
- * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff
- * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS 26
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
- unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
- cmx270_pci_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h
deleted file mode 100644
index 0499323..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa25x.h
+++ /dev/null
@@ -1,161 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA25X_H
-#define __ASM_ARCH_MFP_PXA25X_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0)
-#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
-#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0)
-#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0)
-#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0)
-#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0)
-
-#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1)
-
-/* Crystal and Clock Signals */
-#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
-#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
-#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
-#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
-#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
-#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
-#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1)
-#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1)
-
-/* PC CARD */
-#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
-#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
-#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
-#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-
-/* FFUART */
-#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
-#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
-#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
-#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
-#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
-#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
-#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* HWUART */
-#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3)
-#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
-#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
-#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
-#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1)
-#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
-#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1 */
-#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
-#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
-#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1)
-
-/* SSP 2 - NSSP */
-#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1)
-#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
-#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1)
-#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
-#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
-#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2)
-
-/* MMC */
-#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
-#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
-#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
-#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
-#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
-#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
-#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-
-#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
deleted file mode 100644
index bc73ab8..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ /dev/null
@@ -1,433 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA27X_H
-#define __ASM_ARCH_MFP_PXA27X_H
-
-/*
- * NOTE: for those special-function bidirectional GPIOs, as described
- * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
- * alternative is preserved, the direction is actually selected by the
- * specific controller, and this should work in most cases.
- */
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
-#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0)
-#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0)
-#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0)
-#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0)
-#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0)
-#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0)
-#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0)
-#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0)
-#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0)
-#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0)
-#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0)
-#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0)
-#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0)
-#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0)
-#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0)
-#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0)
-#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0)
-#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0)
-#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0)
-#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0)
-#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0)
-#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0)
-#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0)
-#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0)
-#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0)
-#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0)
-#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0)
-#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0)
-#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0)
-#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0)
-#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0)
-#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0)
-#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0)
-#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0)
-
-/* Crystal and Clock Signals */
-#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
-#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
-#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1)
-
-/* OS Timer Signals */
-#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
-#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1)
-#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW)
-#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
-#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
-#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
-#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
-#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
-#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
-#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
-#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
-#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1)
-#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1)
-#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2)
-#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2)
-#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2)
-#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2)
-#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2)
-#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3)
-#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
-#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
-#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
-#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
-
-/* PC CARD */
-#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
-#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
-#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
-#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
-#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
-#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
-#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
-#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
-
-/* I2C */
-#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
-#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1)
-
-/* FFUART */
-#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3)
-#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3)
-#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
-#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3)
-#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
-#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
-#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2)
-#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
-#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3)
-#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3)
-#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1)
-#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
-#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1)
-#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1)
-#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1)
-#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3)
-#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3)
-#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
-#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
-#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
-#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
-#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
-#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
-#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2)
-#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
-#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
-#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1/2/3 */
-#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
-#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
-#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
-#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
-#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
-#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
-#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
-#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
-#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
-#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
-#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
-#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
-#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
-#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
-#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
-#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
-#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3)
-#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
-#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2)
-#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3)
-#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
-#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2)
-
-/* SSP 2 */
-#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1)
-#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3)
-#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
-#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2)
-#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3)
-#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
-#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
-#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2)
-#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
-#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3)
-#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
-#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
-#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
-#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
-#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
-#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
-#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1)
-#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1)
-#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2)
-#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1)
-#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1)
-#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2)
-#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2)
-
-/* SSP 3 */
-#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3)
-#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
-#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2)
-#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1)
-#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
-#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3)
-#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
-#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1)
-#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
-#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
-#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3)
-#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1)
-#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1)
-
-/* MMC */
-#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
-#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1)
-#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1)
-#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1)
-#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1)
-#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
-#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
-#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
-
-/* Keypad */
-#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1)
-#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1)
-#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1)
-#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1)
-#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1)
-#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1)
-#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1)
-#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2)
-#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1)
-#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1)
-#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1)
-#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2)
-#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3)
-#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3)
-#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3)
-#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2)
-#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
-#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1)
-#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1)
-#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3)
-#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1)
-#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1)
-#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3)
-#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3)
-#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3)
-#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
-#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
-#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
-#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
-#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
-#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
-#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
-#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
-#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
-
-/* USB P3 */
-#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
-#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
-#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3)
-#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3)
-#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2)
-#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2)
-#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3)
-
-/* USB P2 */
-#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
-#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2)
-#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
-#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
-#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3)
-#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3)
-#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2)
-#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2)
-
-/* USB Host Port 1/2 */
-#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
-#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1)
-#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
-
-/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
-#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2)
-#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1)
-#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2)
-#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2)
-#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
-#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1)
-#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1)
-#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2)
-#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
-#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
-#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3)
-#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3)
-#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1)
-#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1)
-#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1)
-#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1)
-#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
-#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3)
-#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1)
-#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2)
-#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3)
-#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3)
-#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3)
-#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3)
-#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3)
-#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3)
-#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2)
-#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2)
-#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2)
-#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2)
-#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1)
-#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1)
-#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1)
-#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1)
-#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1)
-#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1)
-#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1)
-
-/* Universal Subscriber ID Interface */
-#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
-#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
-#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
-#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
-#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
-#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
-#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
-#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3)
-#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
-#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
-
-/* Mobile Scalable Link (MSL) Interface */
-#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
-#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
-#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
-#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
-#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
-#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2)
-#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2)
-#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2)
-#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2)
-#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2)
-#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2)
-#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
-
-/* Memory Stick Host Controller */
-#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
-#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2)
-#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
-#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-extern int keypad_set_wake(unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
deleted file mode 100644
index 8de1c0d..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA2XX_H
-#define __ASM_ARCH_MFP_PXA2XX_H
-
-#include <asm/arch/mfp.h>
-
-/*
- * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
- *
- * MFP_PIN(x)
- * MFP_AFx
- * MFP_LPM_DRIVE_{LOW, HIGH}
- * MFP_LPM_EDGE_x
- *
- * other MFP_x bit definitions will be ignored
- *
- * and adds the below two bits specifically for pxa2xx:
- *
- * bit 23 - Input/Output (PXA2xx specific)
- * bit 24 - Wakeup Enable(PXA2xx specific)
- */
-
-#define MFP_DIR_IN (0x0 << 23)
-#define MFP_DIR_OUT (0x1 << 23)
-#define MFP_DIR_MASK (0x1 << 23)
-#define MFP_DIR(x) (((x) >> 23) & 0x1)
-
-#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
-#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
-#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
-#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
-
-/* specifically for enabling wakeup on keypad GPIOs */
-#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP)
-
-#define MFP_CFG_IN(pin, af) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
-
-/* NOTE: pins configured as output _must_ provide a low power state,
- * and this state should help to minimize the power dissipation.
- */
-#define MFP_CFG_OUT(pin, af, state) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Common configurations for pxa25x and pxa27x
- *
- * Note: pins configured as GPIO are always initialized to input
- * so not to cause any side effect
- */
-#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0)
-#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0)
-#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0)
-#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
-#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
-#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0)
-#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0)
-#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
-#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0)
-#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0)
-#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0)
-#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0)
-#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0)
-#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0)
-#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0)
-#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0)
-#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0)
-#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0)
-#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0)
-#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0)
-#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
-#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0)
-#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0)
-#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0)
-#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
-#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0)
-#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0)
-#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0)
-#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0)
-#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0)
-#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0)
-#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0)
-#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0)
-#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0)
-#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0)
-#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0)
-#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0)
-#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0)
-#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0)
-#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0)
-#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0)
-#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0)
-#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0)
-#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0)
-#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0)
-#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0)
-#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0)
-#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0)
-#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0)
-#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0)
-#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0)
-#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0)
-#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0)
-#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0)
-#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0)
-#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0)
-#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0)
-#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0)
-#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0)
-#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0)
-#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0)
-#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0)
-#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0)
-#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0)
-#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0)
-#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0)
-#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0)
-#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0)
-#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0)
-#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0)
-#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0)
-#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0)
-#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0)
-#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0)
-#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0)
-#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0)
-#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0)
-#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
-
-extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
-extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
-extern int gpio_set_wake(unsigned int gpio, unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
deleted file mode 100644
index bb41031..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
- *
- * PXA300/PXA310 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- * initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA300_H
-#define __ASM_ARCH_MFP_PXA300_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO MFP_CFG(GPIO46, AF1)
-#define GPIO49_GPIO MFP_CFG(GPIO49, AF3)
-#define GPIO50_GPIO MFP_CFG(GPIO50, AF2)
-#define GPIO51_GPIO MFP_CFG(GPIO51, AF3)
-#define GPIO52_GPIO MFP_CFG(GPIO52, AF3)
-#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
-
-#ifdef CONFIG_CPU_PXA310
-#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
-#endif
-
-/* Chip Select */
-#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
-
-/* AC97 */
-#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1)
-#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1)
-#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1)
-#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1)
-#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1)
-#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3)
-#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2)
-#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3)
-#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2)
-#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1)
-#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1)
-
-/* I2C */
-#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
-#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X)
-#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X)
-#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X)
-#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X)
-#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X)
-#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X)
-#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X)
-#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
-#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
-#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
-#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
-#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
-
-/* KEYPAD */
-#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)
-#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT)
-#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT)
-#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT)
-#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT)
-#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT)
-#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT)
-#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT)
-#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT)
-#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
-#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
-
-#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT)
-#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT)
-#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT)
-#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT)
-#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT)
-#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT)
-#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT)
-#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT)
-#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
-#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
-
-#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH)
-#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH)
-#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH)
-#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH)
-#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH)
-#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH)
-#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
-#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
-#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X)
-#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X)
-#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X)
-#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X)
-#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X)
-#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X)
-#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X)
-#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X)
-#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X)
-#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X)
-#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X)
-#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X)
-#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X)
-
-#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X)
-#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X)
-#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-/* Mini-LCD */
-#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X)
-#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X)
-#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X)
-#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X)
-#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X)
-#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X)
-#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X)
-#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X)
-#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X)
-#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X)
-
-/* MMC1 */
-#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
-#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
-#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
-#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH)
-#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
-
-/* MMC2 */
-#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH)
-#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
-#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
-#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
-#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
-#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
-#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
-
-/* SSP1 */
-#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1)
-#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1)
-#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6)
-#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2)
-#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5)
-#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5)
-#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1)
-#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7)
-#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2)
-#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2)
-#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7)
-#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5)
-#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4)
-#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5)
-#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6)
-#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1)
-#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6)
-#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6)
-#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1)
-
-/* SSP2 */
-#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2)
-#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2)
-#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2)
-#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2)
-#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2)
-#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6)
-#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6)
-#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2)
-#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2)
-#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2)
-#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7)
-#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5)
-#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4)
-#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2)
-#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5)
-#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5)
-#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2)
-#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7)
-#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6)
-#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4)
-#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2)
-#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2)
-#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4)
-#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7)
-
-/* SSP3 */
-#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
-#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
-#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
-#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
-#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
-#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
-#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
-#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-/* SSP4 */
-#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
-#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
-#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
-#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
-
-/* UART1 */
-#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT)
-#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT)
-#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT)
-#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT)
-
-#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT)
-#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT)
-#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT)
-#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT)
-#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-
-#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT)
-#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT)
-#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
-#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT)
-
-#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT)
-#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT)
-#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
-#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT)
-#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-
-#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT)
-#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT)
-#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-
-#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT)
-#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT)
-#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT)
-#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT)
-#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT)
-#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT)
-#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT)
-#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT)
-
-#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT)
-#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT)
-#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
-#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT)
-
-/* UART2 */
-#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT)
-#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT)
-#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-
-#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT)
-#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT)
-#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT)
-#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT)
-#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT)
-#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT)
-
-#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT)
-#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT)
-#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-
-#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT)
-#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT)
-#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT)
-#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT)
-#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-
-#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT)
-#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT)
-#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT)
-#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT)
-#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-
-/* USB Host */
-#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1)
-#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1)
-
-/* USB P3 */
-#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2)
-#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2)
-#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2)
-
-/* PWM */
-#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1)
-#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1)
-#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1)
-#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1)
-
-/* CIR */
-#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5)
-#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3)
-
-#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5)
-#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2)
-
-#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1)
-#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7)
-#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6)
-#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6)
-#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6)
-#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6)
-#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2)
-#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3)
-#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7)
-#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6)
-
-#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1)
-
-#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1)
-#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1)
-#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1)
-#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1)
-
-#define GPIO9_SCIO MFP_CFG(GPIO9, AF1)
-#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4)
-#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1)
-
-/*
- * PXA300 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA300
-#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2)
-#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3)
-#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4)
-#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4)
-#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5)
-#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2)
-#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2)
-#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2)
-#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2)
-#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2)
-#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2)
-
-/* U2D UTMI */
-#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1)
-#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3)
-#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1)
-#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5)
-#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3)
-#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2)
-#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5)
-#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3)
-#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2)
-#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1)
-#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5)
-#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1)
-#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3)
-#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3)
-#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3)
-#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4)
-#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3)
-#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3)
-#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3)
-#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4)
-#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2)
-#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7)
-#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4)
-#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2)
-#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3)
-#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5)
-#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1)
-#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2)
-#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3)
-#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3)
-#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2)
-#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3)
-#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5)
-#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3)
-#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5)
-#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3)
-#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4)
-#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3)
-#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7)
-#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5)
-#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3)
-#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5)
-#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3)
-#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3)
-#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3)
-#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3)
-#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3)
-#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3)
-#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3)
-#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3)
-#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3)
-#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3)
-#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3)
-#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3)
-#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3)
-#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3)
-#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3)
-#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3)
-#endif /* CONFIG_CPU_PXA300 */
-
-/*
- * PXA310 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA310
-/* USB P2 */
-#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1)
-#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1)
-#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1)
-#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1)
-#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1)
-#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1)
-
-/* MMC1 */
-#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3)
-#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3)
-
-/* MMC3 */
-#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2)
-#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2)
-#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1)
-#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1)
-#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1)
-#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1)
-#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1)
-#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1)
-
-/* ULPI */
-#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1)
-#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3)
-#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
-#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
-#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3)
-#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3)
-#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3)
-#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3)
-#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
-#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
-
-#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
-#endif /* CONFIG_CPU_PXA310 */
-
-#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
deleted file mode 100644
index 576aa46..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
- *
- * PXA320 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- * initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA320_H
-#define __ASM_ARCH_MFP_PXA320_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
-
-#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
-#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0)
-#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0)
-#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0)
-#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0)
-#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
-
-/* Chip Select */
-#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
-
-/* AC97 */
-#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1)
-#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1)
-#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1)
-#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1)
-#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1)
-#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2)
-#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2)
-#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
-#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3)
-#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1)
-#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1)
-
-/* I2C */
-#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
-#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X)
-#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X)
-#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X)
-#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X)
-#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X)
-#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X)
-#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X)
-#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X)
-#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X)
-#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X)
-#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X)
-#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X)
-#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X)
-#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X)
-
-#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5)
-
-#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3)
-#define GPIO0_DRQ MFP_CFG(GPIO0, AF2)
-#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5)
-#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6)
-#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1)
-#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4)
-#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1)
-#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1)
-
-#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-
-#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT)
-#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT)
-#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-
-#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-
-#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT)
-#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT)
-
-#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-
-#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-
-#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
-
-#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
-#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
-#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
-#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
-#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
-#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
-#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
-#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
-#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
-#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X)
-#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X)
-#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
-#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
-#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
-#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
-#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X)
-#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
-#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
-#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
-#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
-#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
-#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
-#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
-#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
-#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X)
-#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X)
-#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
-#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
-#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
-#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
-
-/* MMC1 */
-#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH)
-#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
-#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
-#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
-#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
-#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
-#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
-#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
-#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
-#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
-
-#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
-#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
-#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
-#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
-#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-
-#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
-#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
-#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
-#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
-#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
-#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
-#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
-#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
-#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-
-/* 1-Wire */
-#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT)
-#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-
-/* SSP1 */
-#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1)
-#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1)
-#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1)
-#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1)
-#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6)
-#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1)
-#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6)
-
-/* SSP2 */
-#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2)
-#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2)
-#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2)
-#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2)
-#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2)
-#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5)
-#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2)
-#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
-#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
-
-#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
-#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
-#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
-#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
-#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
-#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
-
-#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
-#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
-#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
-#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
-#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
-
-/* UART1 */
-#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
-#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
-#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
-#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT)
-#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
-#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
-#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
-#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
-#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT)
-#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
-#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
-#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
-#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
-#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-/* UART2 */
-#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT)
-#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT)
-#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT)
-#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT)
-#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT)
-#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT)
-#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT)
-#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT)
-#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-
-/* USB 2.0 UTMI */
-#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1)
-#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3)
-#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1)
-#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5)
-#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3)
-#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2)
-#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5)
-#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3)
-#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1)
-#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5)
-#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1)
-#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3)
-#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3)
-#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3)
-#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4)
-#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3)
-#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3)
-#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3)
-
-#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3)
-#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3)
-#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3)
-#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3)
-#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3)
-#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3)
-#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3)
-#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3)
-
-#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3)
-#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3)
-#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3)
-#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3)
-#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3)
-#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3)
-#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3)
-#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3)
-
-#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4)
-#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2)
-#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7)
-
-#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4)
-#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2)
-#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4)
-#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5)
-
-#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1)
-#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2)
-#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3)
-
-#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3)
-#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2)
-#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3)
-
-#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5)
-#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3)
-#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7)
-#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5)
-
-#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4)
-#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5)
-#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7)
-
-#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5)
-#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3)
-#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5)
-
-/* USB Host 1.1 */
-#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1)
-#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1)
-
-/* USB P2 */
-#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2)
-#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4)
-#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4)
-#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2)
-#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2)
-#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2)
-#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2)
-#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2)
-#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2)
-
-/* USB P3 */
-#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2)
-#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2)
-#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2)
-
-#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6)
-#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6)
-
-#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
-#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
-
-#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
-#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
-#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1)
-#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1)
-
-#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h
deleted file mode 100644
index c4e945a..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa930.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62 MFP_CFG(RDY, AF0)
-
-/* Chip Select */
-#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
deleted file mode 100644
index e7d5879..0000000
--- a/include/asm-arm/arch-pxa/mfp.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- * initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#define mfp_to_gpio(m) ((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
- MFP_PIN_INVALID = -1,
-
- MFP_PIN_GPIO0 = 0,
- MFP_PIN_GPIO1,
- MFP_PIN_GPIO2,
- MFP_PIN_GPIO3,
- MFP_PIN_GPIO4,
- MFP_PIN_GPIO5,
- MFP_PIN_GPIO6,
- MFP_PIN_GPIO7,
- MFP_PIN_GPIO8,
- MFP_PIN_GPIO9,
- MFP_PIN_GPIO10,
- MFP_PIN_GPIO11,
- MFP_PIN_GPIO12,
- MFP_PIN_GPIO13,
- MFP_PIN_GPIO14,
- MFP_PIN_GPIO15,
- MFP_PIN_GPIO16,
- MFP_PIN_GPIO17,
- MFP_PIN_GPIO18,
- MFP_PIN_GPIO19,
- MFP_PIN_GPIO20,
- MFP_PIN_GPIO21,
- MFP_PIN_GPIO22,
- MFP_PIN_GPIO23,
- MFP_PIN_GPIO24,
- MFP_PIN_GPIO25,
- MFP_PIN_GPIO26,
- MFP_PIN_GPIO27,
- MFP_PIN_GPIO28,
- MFP_PIN_GPIO29,
- MFP_PIN_GPIO30,
- MFP_PIN_GPIO31,
- MFP_PIN_GPIO32,
- MFP_PIN_GPIO33,
- MFP_PIN_GPIO34,
- MFP_PIN_GPIO35,
- MFP_PIN_GPIO36,
- MFP_PIN_GPIO37,
- MFP_PIN_GPIO38,
- MFP_PIN_GPIO39,
- MFP_PIN_GPIO40,
- MFP_PIN_GPIO41,
- MFP_PIN_GPIO42,
- MFP_PIN_GPIO43,
- MFP_PIN_GPIO44,
- MFP_PIN_GPIO45,
- MFP_PIN_GPIO46,
- MFP_PIN_GPIO47,
- MFP_PIN_GPIO48,
- MFP_PIN_GPIO49,
- MFP_PIN_GPIO50,
- MFP_PIN_GPIO51,
- MFP_PIN_GPIO52,
- MFP_PIN_GPIO53,
- MFP_PIN_GPIO54,
- MFP_PIN_GPIO55,
- MFP_PIN_GPIO56,
- MFP_PIN_GPIO57,
- MFP_PIN_GPIO58,
- MFP_PIN_GPIO59,
- MFP_PIN_GPIO60,
- MFP_PIN_GPIO61,
- MFP_PIN_GPIO62,
- MFP_PIN_GPIO63,
- MFP_PIN_GPIO64,
- MFP_PIN_GPIO65,
- MFP_PIN_GPIO66,
- MFP_PIN_GPIO67,
- MFP_PIN_GPIO68,
- MFP_PIN_GPIO69,
- MFP_PIN_GPIO70,
- MFP_PIN_GPIO71,
- MFP_PIN_GPIO72,
- MFP_PIN_GPIO73,
- MFP_PIN_GPIO74,
- MFP_PIN_GPIO75,
- MFP_PIN_GPIO76,
- MFP_PIN_GPIO77,
- MFP_PIN_GPIO78,
- MFP_PIN_GPIO79,
- MFP_PIN_GPIO80,
- MFP_PIN_GPIO81,
- MFP_PIN_GPIO82,
- MFP_PIN_GPIO83,
- MFP_PIN_GPIO84,
- MFP_PIN_GPIO85,
- MFP_PIN_GPIO86,
- MFP_PIN_GPIO87,
- MFP_PIN_GPIO88,
- MFP_PIN_GPIO89,
- MFP_PIN_GPIO90,
- MFP_PIN_GPIO91,
- MFP_PIN_GPIO92,
- MFP_PIN_GPIO93,
- MFP_PIN_GPIO94,
- MFP_PIN_GPIO95,
- MFP_PIN_GPIO96,
- MFP_PIN_GPIO97,
- MFP_PIN_GPIO98,
- MFP_PIN_GPIO99,
- MFP_PIN_GPIO100,
- MFP_PIN_GPIO101,
- MFP_PIN_GPIO102,
- MFP_PIN_GPIO103,
- MFP_PIN_GPIO104,
- MFP_PIN_GPIO105,
- MFP_PIN_GPIO106,
- MFP_PIN_GPIO107,
- MFP_PIN_GPIO108,
- MFP_PIN_GPIO109,
- MFP_PIN_GPIO110,
- MFP_PIN_GPIO111,
- MFP_PIN_GPIO112,
- MFP_PIN_GPIO113,
- MFP_PIN_GPIO114,
- MFP_PIN_GPIO115,
- MFP_PIN_GPIO116,
- MFP_PIN_GPIO117,
- MFP_PIN_GPIO118,
- MFP_PIN_GPIO119,
- MFP_PIN_GPIO120,
- MFP_PIN_GPIO121,
- MFP_PIN_GPIO122,
- MFP_PIN_GPIO123,
- MFP_PIN_GPIO124,
- MFP_PIN_GPIO125,
- MFP_PIN_GPIO126,
- MFP_PIN_GPIO127,
- MFP_PIN_GPIO0_2,
- MFP_PIN_GPIO1_2,
- MFP_PIN_GPIO2_2,
- MFP_PIN_GPIO3_2,
- MFP_PIN_GPIO4_2,
- MFP_PIN_GPIO5_2,
- MFP_PIN_GPIO6_2,
- MFP_PIN_GPIO7_2,
- MFP_PIN_GPIO8_2,
- MFP_PIN_GPIO9_2,
- MFP_PIN_GPIO10_2,
- MFP_PIN_GPIO11_2,
- MFP_PIN_GPIO12_2,
- MFP_PIN_GPIO13_2,
- MFP_PIN_GPIO14_2,
- MFP_PIN_GPIO15_2,
- MFP_PIN_GPIO16_2,
- MFP_PIN_GPIO17_2,
-
- MFP_PIN_ULPI_STP,
- MFP_PIN_ULPI_NXT,
- MFP_PIN_ULPI_DIR,
-
- MFP_PIN_nXCVREN,
- MFP_PIN_DF_CLE_nOE,
- MFP_PIN_DF_nADV1_ALE,
- MFP_PIN_DF_SCLK_E,
- MFP_PIN_DF_SCLK_S,
- MFP_PIN_nBE0,
- MFP_PIN_nBE1,
- MFP_PIN_DF_nADV2_ALE,
- MFP_PIN_DF_INT_RnB,
- MFP_PIN_DF_nCS0,
- MFP_PIN_DF_nCS1,
- MFP_PIN_nLUA,
- MFP_PIN_nLLA,
- MFP_PIN_DF_nWE,
- MFP_PIN_DF_ALE_nWE,
- MFP_PIN_DF_nRE_nOE,
- MFP_PIN_DF_ADDR0,
- MFP_PIN_DF_ADDR1,
- MFP_PIN_DF_ADDR2,
- MFP_PIN_DF_ADDR3,
- MFP_PIN_DF_IO0,
- MFP_PIN_DF_IO1,
- MFP_PIN_DF_IO2,
- MFP_PIN_DF_IO3,
- MFP_PIN_DF_IO4,
- MFP_PIN_DF_IO5,
- MFP_PIN_DF_IO6,
- MFP_PIN_DF_IO7,
- MFP_PIN_DF_IO8,
- MFP_PIN_DF_IO9,
- MFP_PIN_DF_IO10,
- MFP_PIN_DF_IO11,
- MFP_PIN_DF_IO12,
- MFP_PIN_DF_IO13,
- MFP_PIN_DF_IO14,
- MFP_PIN_DF_IO15,
-
- /* additional pins on PXA930 */
- MFP_PIN_GSIM_UIO,
- MFP_PIN_GSIM_UCLK,
- MFP_PIN_GSIM_UDET,
- MFP_PIN_GSIM_nURST,
- MFP_PIN_PMIC_INT,
- MFP_PIN_RDY,
-
- MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * alternate function = 0,
- * drive strength = fast 3mA (MFP_DS03X)
- * low power mode = default
- * edge detection = none
- *
- * MFP_CFG - default MFPR value with alternate function
- * MFP_CFG_DRV - default MFPR value with alternate function and
- * pin drive strength
- * MFP_CFG_LPM - default MFPR value with alternate function and
- * low power mode
- * MFP_CFG_X - default MFPR value with alternate function,
- * pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x) ((x) & 0x3ff)
-
-#define MFP_AF0 (0x0 << 10)
-#define MFP_AF1 (0x1 << 10)
-#define MFP_AF2 (0x2 << 10)
-#define MFP_AF3 (0x3 << 10)
-#define MFP_AF4 (0x4 << 10)
-#define MFP_AF5 (0x5 << 10)
-#define MFP_AF6 (0x6 << 10)
-#define MFP_AF7 (0x7 << 10)
-#define MFP_AF_MASK (0x7 << 10)
-#define MFP_AF(x) (((x) >> 10) & 0x7)
-
-#define MFP_DS01X (0x0 << 13)
-#define MFP_DS02X (0x1 << 13)
-#define MFP_DS03X (0x2 << 13)
-#define MFP_DS04X (0x3 << 13)
-#define MFP_DS06X (0x4 << 13)
-#define MFP_DS08X (0x5 << 13)
-#define MFP_DS10X (0x6 << 13)
-#define MFP_DS13X (0x7 << 13)
-#define MFP_DS_MASK (0x7 << 13)
-#define MFP_DS(x) (((x) >> 13) & 0x7)
-
-#define MFP_LPM_INPUT (0x0 << 16)
-#define MFP_LPM_DRIVE_LOW (0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
-#define MFP_LPM_PULL_LOW (0x3 << 16)
-#define MFP_LPM_PULL_HIGH (0x4 << 16)
-#define MFP_LPM_FLOAT (0x5 << 16)
-#define MFP_LPM_STATE_MASK (0x7 << 16)
-#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE (0x0 << 19)
-#define MFP_LPM_EDGE_RISE (0x1 << 19)
-#define MFP_LPM_EDGE_FALL (0x2 << 19)
-#define MFP_LPM_EDGE_BOTH (0x3 << 19)
-#define MFP_LPM_EDGE_MASK (0x3 << 19)
-#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE (0x0 << 21)
-#define MFP_PULL_LOW (0x1 << 21)
-#define MFP_PULL_HIGH (0x2 << 21)
-#define MFP_PULL_BOTH (0x3 << 21)
-#define MFP_PULL_MASK (0x3 << 21)
-#define MFP_PULL(x) (((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
- MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af) \
- ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h
deleted file mode 100644
index 8704dbc..0000000
--- a/include/asm-arm/arch-pxa/mtd-xip.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Nicolas Pitre
- * Created: Nov 2, 2004
- * Copyright: (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <asm/arch/pxa-regs.h>
-
-#define xip_irqpending() (ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime() (OSCR)
-#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period. This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h
deleted file mode 100644
index 7beae14..0000000
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO 0
-#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC 0x51 /* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM 0x54 /* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO 52
-#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS PXA_CS5_PHYS
-#define PCM027_ETH_SIZE (1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO 114
-#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS 0x22000000
-#define PCM027_CAN_SIZE 0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO 27
-#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS 24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS 0x00000000
-#define PCM027_FLASH_SIZE 0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU 90
-#define PCM027_LED_HEARD_BEAT 91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h
deleted file mode 100644
index 2e20131..0000000
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <asm/arch/pcm027.h>
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO 9
-#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
-#define PCM990_CTRL_BASE 0xea000000
-#define PCM990_CTRL_SIZE (1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO 14
-#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
-#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */
-#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */
-#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */
-
-#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */
-#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */
-#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */
-
-#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */
-#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */
-
-#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */
-
-#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */
-#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */
-#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */
-#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */
-#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */
-#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */
-#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */
-#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */
-
-#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __PCM990_CTRL_REG(x) \
- (*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO 13
-#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
-#define PCM990_IDE_PLD_BASE 0xee000000
-#define PCM990_IDE_PLD_SIZE (1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */
-#define PCM990_IDE_STBY 0x0008 /* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */
-#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */
-#define PCM990_IDE_RDY 0x0008 /* RDY */
-
-#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */
-#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */
-#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */
-#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __PCM990_IDE_PLD_REG(x) \
- (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
- __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
- __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
- __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
- __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
- __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO 11
-#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO 12
-#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
-#define PCM990_CF_PLD_BASE 0xef000000
-#define PCM990_CF_PLD_SIZE (1*1024*1024)
-#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */
-#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */
-
-#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */
-#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */
-
-#ifndef __ASSEMBLY__
-# define __PCM990_CF_PLD_REG(x) \
- (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO 10
-#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO 9
-#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
deleted file mode 100644
index 4d6a403..0000000
--- a/include/asm-arm/arch-pxa/poodle.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Based on:
- * linux/include/asm-arm/arch-sa1100/collie.h
- *
- * ChangeLog:
- * 04-06-2001 Lineo Japan, Inc.
- * 04-16-2001 SHARP Corporation
- * Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H 1
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY (0)
-#define POODLE_GPIO_AC_IN (1)
-#define POODLE_GPIO_CO 16
-#define POODLE_GPIO_TP_INT (5)
-#define POODLE_GPIO_WAKEUP (11) /* change battery */
-#define POODLE_GPIO_GA_INT (10)
-#define POODLE_GPIO_IR_ON (22)
-#define POODLE_GPIO_HP_IN (4)
-#define POODLE_GPIO_CF_IRQ (17)
-#define POODLE_GPIO_CF_CD (14)
-#define POODLE_GPIO_CF_STSCHG (14)
-#define POODLE_GPIO_SD_PWR (33)
-#define POODLE_GPIO_SD_PWR1 (3)
-#define POODLE_GPIO_nSD_CLK (6)
-#define POODLE_GPIO_nSD_WP (7)
-#define POODLE_GPIO_nSD_INT (8)
-#define POODLE_GPIO_nSD_DETECT (9)
-#define POODLE_GPIO_MAIN_BAT_LOW (13)
-#define POODLE_GPIO_BAT_COVER (13)
-#define POODLE_GPIO_USB_PULLUP (20)
-#define POODLE_GPIO_ADC_TEMP_ON (21)
-#define POODLE_GPIO_BYPASS_ON (36)
-#define POODLE_GPIO_CHRG_ON (38)
-#define POODLE_GPIO_CHRG_FULL (16)
-#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT ( 0 )
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
deleted file mode 100644
index dce9308..0000000
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ /dev/null
@@ -1,1070 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxa-regs.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
-#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
-#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
-#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
-
-
-
-/*
- * DMA Controller
- */
-
-#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
-#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
-#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
-#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
-#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
-#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
-#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
-#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
-#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
-#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
-#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
-#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
-#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
-#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
-#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
-#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
-
-#define DCSR(x) __REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-#endif
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-
-#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
-#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-
-#define DRCMR(n) (*(((n) < 64) ? \
- &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
- &__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23 __REG(0x4000015c) /* Reserved */
-#define DRCMR24 __REG(0x40000160) /* Reserved */
-#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29 __REG(0x40000174) /* Reserved */
-#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34 __REG(0x40000188) /* Reserved */
-#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39 __REG(0x4000019C) /* Reserved */
-#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR DRCMR2
-#define DRCMRTXSADR DRCMR3
-#define DRCMRRXBTRBR DRCMR4
-#define DRCMRTXBTTHR DRCMR5
-#define DRCMRRXFFRBR DRCMR6
-#define DRCMRTXFFTHR DRCMR7
-#define DRCMRRXMCDR DRCMR8
-#define DRCMRRXMODR DRCMR9
-#define DRCMRTXMODR DRCMR10
-#define DRCMRRXPCDR DRCMR11
-#define DRCMRTXPCDR DRCMR12
-#define DRCMRRXSSDR DRCMR13
-#define DRCMRTXSSDR DRCMR14
-#define DRCMRRXSS2DR DRCMR15
-#define DRCMRTXSS2DR DRCMR16
-#define DRCMRRXICDR DRCMR17
-#define DRCMRTXICDR DRCMR18
-#define DRCMRRXSTRBR DRCMR19
-#define DRCMRTXSTTHR DRCMR20
-#define DRCMRRXMMC DRCMR21
-#define DRCMRTXMMC DRCMR22
-#define DRCMRRXSS3DR DRCMR66
-#define DRCMRTXSS3DR DRCMR67
-#define DRCMRUDC(x) DRCMR((x) + 24)
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-
-#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
-#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
-#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
-#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
-#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
-#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
-#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
-#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
-#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
-#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
-#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
-#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
-#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
-#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
-#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
-#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
-#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
-#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
-#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
-#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
-#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
-#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
-#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
-#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
-#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
-#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
-#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
-#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
-#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
-#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
-#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
-#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
-#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
-#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
-#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
-#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
-#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
-#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
-#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
-#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
-#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
-#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
-#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
-#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
-#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
-#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
-#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
-#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
-
-#define DDADR(x) __REG2(0x40000200, (x) << 4)
-#define DSADR(x) __REG2(0x40000204, (x) << 4)
-#define DTADR(x) __REG2(0x40000208, (x) << 4)
-#define DCMD(x) __REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
-#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
-#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
-#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
-#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
-#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
-#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
-#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
-#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
-#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
-#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
-#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
-#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
-#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
-#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
-#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
-#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
-#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
-#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
-#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
-#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
-#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
-#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
-#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
-#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
-#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
-#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
-#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
-#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
-#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
-#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
-#define STMSR __REG(0x40700018) /* Reserved */
-#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
-#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
-#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART HWRBR
-#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
-#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
-#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
-#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
-#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
-#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
-#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
-#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
-#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
-#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
-#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
-#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
-#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
-#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
-#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4)
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
-#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
-#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
-#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
-#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers
- */
-
-#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
-#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
-#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
-#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
-#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
-#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START (1 << 0) /* start bit */
-#define ICR_STOP (1 << 1) /* stop bit */
-#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
-#define ICR_TB (1 << 3) /* transfer byte bit */
-#define ICR_MA (1 << 4) /* master abort */
-#define ICR_SCLE (1 << 5) /* master clock enable */
-#define ICR_IUE (1 << 6) /* unit enable */
-#define ICR_GCD (1 << 7) /* general call disable */
-#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
-#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
-#define ICR_BEIE (1 << 10) /* enable bus error ints */
-#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
-#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
-#define ICR_SADIE (1 << 13) /* slave address detected int enable */
-#define ICR_UR (1 << 14) /* unit reset */
-
-#define ISR_RWM (1 << 0) /* read/write mode */
-#define ISR_ACKNAK (1 << 1) /* ack/nak status */
-#define ISR_UB (1 << 2) /* unit busy */
-#define ISR_IBB (1 << 3) /* bus busy */
-#define ISR_SSD (1 << 4) /* slave stop detected */
-#define ISR_ALD (1 << 5) /* arbitration loss detected */
-#define ISR_ITE (1 << 6) /* tx buffer empty */
-#define ISR_IRF (1 << 7) /* rx buffer full */
-#define ISR_GCAD (1 << 8) /* general call address detected */
-#define ISR_SAD (1 << 9) /* slave address detected */
-#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
-
-
-/*
- * Serial Audio Controller
- */
-
-#define SACR0 __REG(0x40400000) /* Global Control Register */
-#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
-#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
-#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
-#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
-#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
-#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
-#define SACR0_ENB (1 << 0) /* Enable I2S Link */
-#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
-#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
-#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
-
-#define SASR0_I2SOFF (1 << 7) /* Controller Status */
-#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
-#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
-#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
-#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
-#define SASR0_BSY (1 << 2) /* I2S Busy */
-#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
-#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
-
-#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR __REG(0x40500000) /* PCM Out Control Register */
-#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define PICR __REG(0x40500004) /* PCM In Control Register */
-#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MCCR __REG(0x40500008) /* Mic In Control Register */
-#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define GCR __REG(0x4050000C) /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
-#endif
-#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
-#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
-#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
-#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
-#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
-
-#define POSR __REG(0x40500010) /* PCM Out Status Register */
-#define POSR_FIFOE (1 << 4) /* FIFO error */
-#define POSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define PISR __REG(0x40500014) /* PCM In Status Register */
-#define PISR_FIFOE (1 << 4) /* FIFO error */
-#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MCSR __REG(0x40500018) /* Mic In Status Register */
-#define MCSR_FIFOE (1 << 4) /* FIFO error */
-#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define GSR __REG(0x4050001C) /* Global Status Register */
-#define GSR_CDONE (1 << 19) /* Command Done */
-#define GSR_SDONE (1 << 18) /* Status Done */
-#define GSR_RDCS (1 << 15) /* Read Completion Status */
-#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
-#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
-#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
-#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
-#define GSR_PCR (1 << 8) /* Primary Codec Ready */
-#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
-#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
-#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
-#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
-#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
-#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
-#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
-
-#define CAR __REG(0x40500020) /* CODEC Access Register */
-#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
-
-#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
-#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
-
-#define MOCR __REG(0x40500100) /* Modem Out Control Register */
-#define MOCR_FEIE (1 << 3) /* FIFO Error */
-#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MICR __REG(0x40500108) /* Modem In Control Register */
-#define MICR_FEIE (1 << 3) /* FIFO Error */
-#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MOSR __REG(0x40500110) /* Modem Out Status Register */
-#define MOSR_FIFOE (1 << 4) /* FIFO error */
-#define MOSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MISR __REG(0x40500118) /* Modem In Status Register */
-#define MISR_FIFOE (1 << 4) /* FIFO error */
-#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
-#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
-#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
-#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP __REG(0x40800000) /* Start of FICP area */
-#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
-#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
-#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
-#define ICDR __REG(0x4080000c) /* ICP Data Register */
-#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
-#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
-
-#define ICCR0_AME (1 << 7) /* Address match enable */
-#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
-#define ICCR0_RXE (1 << 4) /* Receive enable */
-#define ICCR0_TXE (1 << 3) /* Transmit enable */
-#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
-#define ICCR0_LBM (1 << 1) /* Loopback mode */
-#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-
-#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
-#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
-#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
-#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
-#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE (1 << 5) /* Framing error */
-#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
-#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
-#define ICSR0_RAB (1 << 2) /* Receiver abort */
-#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
-#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
-
-#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
-#define ICSR1_CRE (1 << 5) /* CRC error */
-#define ICSR1_EOF (1 << 4) /* End of frame */
-#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
-#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
-#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
-#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
-
-
-/*
- * Real Time Clock
- */
-
-#define RCNR __REG(0x40900000) /* RTC Count Register */
-#define RTAR __REG(0x40900004) /* RTC Alarm Register */
-#define RTSR __REG(0x40900008) /* RTC Status Register */
-#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
-#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
-#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
-#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
-#define RTSR_AL (1 << 0) /* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3 (1 << 3) /* Match status channel 3 */
-#define OSSR_M2 (1 << 2) /* Match status channel 2 */
-#define OSSR_M1 (1 << 1) /* Match status channel 1 */
-#define OSSR_M0 (1 << 0) /* Match status channel 0 */
-
-#define OWER_WME (1 << 0) /* Watchdog Match Enable */
-
-#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
-#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
-#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
-#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
-
-
-/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
-#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
-#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
-#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
-#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
- ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0 __REG(0x50000000)
-#define CICR1 __REG(0x50000004)
-#define CICR2 __REG(0x50000008)
-#define CICR3 __REG(0x5000000C)
-#define CICR4 __REG(0x50000010)
-#define CISR __REG(0x50000014)
-#define CIFR __REG(0x50000018)
-#define CITOR __REG(0x5000001C)
-#define CIBR0 __REG(0x50000028)
-#define CIBR1 __REG(0x50000030)
-#define CIBR2 __REG(0x50000038)
-
-#define CICR0_DMAEN (1 << 31) /* DMA request enable */
-#define CICR0_PAR_EN (1 << 30) /* Parity enable */
-#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
-#define CICR0_ENB (1 << 28) /* Camera interface enable */
-#define CICR0_DIS (1 << 27) /* Camera interface disable */
-#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
-#define CICR0_TOM (1 << 9) /* Time-out mask */
-#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
-#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
-#define CICR0_EOLM (1 << 6) /* End-of-line mask */
-#define CICR0_PERRM (1 << 5) /* Parity-error mask */
-#define CICR0_QDM (1 << 4) /* Quick-disable mask */
-#define CICR0_CDM (1 << 3) /* Disable-done mask */
-#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
-#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
-#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
-
-#define CICR1_TBIT (1 << 31) /* Transparency bit */
-#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
-#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
-#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
-#define CICR1_RGB_F (1 << 11) /* RGB format */
-#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
-#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
-#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
-#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
-#define CICR1_DW (0x7 << 0) /* Data width mask */
-
-#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
- wait count mask */
-#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
- wait count mask */
-#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
-#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR2_FSW (0x7 << 0) /* Frame stabilization
- wait count mask */
-
-#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
- wait count mask */
-#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
- wait count mask */
-#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
-#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
-
-#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
-#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
-#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
-#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
-#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
-#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
-#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
-
-#define CISR_FTO (1 << 15) /* FIFO time-out */
-#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
-#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
-#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
-#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
-#define CISR_EOL (1 << 8) /* End of line */
-#define CISR_PAR_ERR (1 << 7) /* Parity error */
-#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_CDD (1 << 5) /* Camera interface disable done */
-#define CISR_SOF (1 << 4) /* Start of frame */
-#define CISR_EOF (1 << 3) /* End of frame */
-#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
-#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
-#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
-#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
-#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
-#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
-#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
-#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
-#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
-
-#define SRAM_SIZE 0x40000 /* 4x64K */
-
-#define SRAM_MEM_PHYS 0x5C000000
-
-#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
-#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
-#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
-
-#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
-#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
-#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
-
-#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
-#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
-#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
-
-#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
-#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
-#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
-
-#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
-#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
-
-#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
-#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
-
-#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
-#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
-
-#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
-#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
-
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS (0x4C000000)
-#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
-
-#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
-#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
-#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
-#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
-
-#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
-#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
-#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
-#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
-#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
-#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
-#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
-#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
-
-#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
-#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
- Interrupt Enable*/
-#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
-
-#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE 0x1
-#define PWRMODE_STANDBY 0x2
-#define PWRMODE_SLEEP 0x3
-#define PWRMODE_DEEPSLEEP 0x7
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
deleted file mode 100644
index 73e0a32..0000000
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
- *
- * Taken from pxa-regs.h by Russell King
- *
- * Author: Nicolas Pitre
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA2XX_REGS_H
-#define __PXA2XX_REGS_H
-
-/*
- * Memory controller
- */
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
-#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
-#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
-#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
-#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-
-#endif
-
-
-/*
- * Power Manager
- */
-
-#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
-#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
-#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
-#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
-#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG2(0x40F00080, (x)<<2)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC (1<<12)
-#define PCMD_DCE (1<<11)
-#define PCMD_LC (1<<10)
-/* FIXME: PCMD_SQC need be checked. */
-#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
- bit 9 should be 0 all day. */
-#define PVCR_VCSA (0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN (0x1 << 6)
-
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
-#define PSSR_RDH (1 << 5) /* Read Disable Hold */
-#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
-#define PSSR_STS (1 << 3) /* Standby Mode Status */
-#define PSSR_VFS (1 << 2) /* VDD Fault Status */
-#define PSSR_BFS (1 << 1) /* Battery Fault Status */
-#define PSSR_SSS (1 << 0) /* Software Sleep Status */
-
-#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO (1 << 15) /* RDH Override */
-#define PCFR_PO (1 << 14) /* PH Override */
-#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
-#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
-#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
-#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
-#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
-#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
-#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
-#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR (1 << 3) /* GPIO Reset */
-#define RCSR_SMR (1 << 2) /* Sleep Mode */
-#define RCSR_WDR (1 << 1) /* Watchdog Reset */
-#define RCSR_HWR (1 << 0) /* Hardware Reset */
-
-#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
-/*
- * PXA2xx specific Core clock definitions
- */
-#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-#define CKEN __REG(0x41300004) /* Clock Enable Register */
-#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
-#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
-#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
-#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
-#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
-#define CKEN_IM (20) /* Internal Memory Clock Enable */
-#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
-#define CKEN_USIM (18) /* USIM Unit Clock Enable */
-#define CKEN_MSL (17) /* MSL Unit Clock Enable */
-#define CKEN_LCD (16) /* LCD Unit Clock Enable */
-#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
-#define CKEN_I2C (14) /* I2C Unit Clock Enable */
-#define CKEN_FICP (13) /* FICP Unit Clock Enable */
-#define CKEN_MMC (12) /* MMC Unit Clock Enable */
-#define CKEN_USB (11) /* USB Unit Clock Enable */
-#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
-#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S (8) /* I2S Unit Clock Enable */
-#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
-#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
-#define CKEN_STUART (5) /* STUART Unit Clock Enable */
-#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
-#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
-#define CKEN_SSP (3) /* SSP Unit Clock Enable */
-#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
-#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
-#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
-#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
-
-#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
deleted file mode 100644
index fe9364c..0000000
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */
-
-#define OSCC_PEN (1 << 11) /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
-#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
-#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
-#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
-#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
-#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
-#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
-#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
-#define PCMD(x) __REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Managment Unit
- */
-#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */
-#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */
-#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */
-#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */
-#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */
-#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH (1 << 31)
-#define ASCR_D1S (1 << 2)
-#define ASCR_D2S (1 << 1)
-#define ASCR_D3S (1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR (1 << 3)
-#define ARSR_LPMR (1 << 2)
-#define ARSR_WDT (1 << 1)
-#define ARSR_HWR (1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC (1 << 31) /* RTC */
-#define ADXER_WOST (1 << 30) /* OS Timer */
-#define ADXER_WTSI (1 << 29) /* Touchscreen */
-#define ADXER_WUSBH (1 << 28) /* USB host */
-#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */
-#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/
-#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */
-#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */
-#define ADXER_WKP (1 << 21) /* Keypad */
-#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */
-#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */
-#define ADXER_WOTG (1 << 16) /* USBOTG input */
-#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */
-#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */
-#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */
-#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */
-#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */
-#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */
-#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */
-#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */
-#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */
-#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */
-#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */
-#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */
-#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */
-#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2 (1 << 8)
-#define ADXR_R5 (1 << 5)
-#define ADXR_R4 (1 << 4)
-#define ADXR_R3 (1 << 3)
-#define ADXR_R2 (1 << 2)
-#define ADXR_R1 (1 << 1)
-#define ADXR_R0 (1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */
-#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */
-#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */
-#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1 0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
-#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
-#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
-#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
-#define CKENB __REG(0x41340010) /* B Clock Enable Register */
-#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD 1 /* < LCD Clock Enable */
-#define CKEN_USBH 2 /* < USB host clock enable */
-#define CKEN_CAMERA 3 /* < Camera interface clock enable */
-#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
-#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
-#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT 11 /* < Boot rom clock enable */
-#define CKEN_MMC1 12 /* < MMC1 Clock enable */
-#define CKEN_MMC2 13 /* < MMC2 clock enable */
-#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
-#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
-#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
-#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
-#define CKEN_TPM 19 /* < TPM clock enable */
-#define CKEN_UDC 20 /* < UDC clock enable */
-#define CKEN_BTUART 21 /* < BTUART clock enable */
-#define CKEN_FFUART 22 /* < FFUART clock enable */
-#define CKEN_STUART 23 /* < STUART clock enable */
-#define CKEN_AC97 24 /* < AC97 clock enable */
-#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1 26 /* < SSP1 clock enable */
-#define CKEN_SSP2 27 /* < SSP2 clock enable */
-#define CKEN_SSP3 28 /* < SSP3 clock enable */
-#define CKEN_SSP4 29 /* < SSP4 clock enable */
-#define CKEN_MSL0 30 /* < MSL0 clock enable */
-#define CKEN_PWM0 32 /* < PWM[0] clock enable */
-#define CKEN_PWM1 33 /* < PWM[1] clock enable */
-#define CKEN_I2C 36 /* < I2C clock enable */
-#define CKEN_INTC 38 /* < Interrupt controller clock enable */
-#define CKEN_GPIO 39 /* < GPIO clock enable */
-#define CKEN_1WIRE 40 /* < 1-wire clock enable */
-#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
-#define CKEN_MINI_IM 48 /* < Mini-IM */
-#define CKEN_MINI_LCD 49 /* < Mini LCD */
-
-#if defined(CONFIG_CPU_PXA310)
-#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
-#define CKEN_MVED 43 /* < MVED clock enable */
-#endif
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
deleted file mode 100644
index daf018d..0000000
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxafb.h
- *
- * Support for the xscale frame buffer.
- *
- * Author: Jean-Frederic Clere
- * Created: Sep 22, 2003
- * Copyright: jfclere@sinix.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <asm/arch/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- * STN - for passive matrix
- * DSTN - for dual scan passive matrix
- * TFT - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit 18 : for output enable polarity
- * bit 19 : for pixel clock edge
- */
-#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_UNKNOWN 0
-#define LCD_TYPE_MONO_STN 1
-#define LCD_TYPE_MONO_DSTN 2
-#define LCD_TYPE_COLOR_STN 3
-#define LCD_TYPE_COLOR_DSTN 4
-#define LCD_TYPE_COLOR_TFT 5
-#define LCD_TYPE_SMART_PANEL 6
-#define LCD_TYPE_MAX 7
-
-#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 17)
-#define LCD_BIAS_ACTIVE_LOW (1 << 17)
-#define LCD_PCLK_EDGE_RISE (0 << 18)
-#define LCD_PCLK_EDGE_FALL (1 << 18)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_char bpp;
- u_int cmap_greyscale:1,
- depth:8,
- unused:23;
-
- /* Parallel Mode Timing */
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
-
- /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
- * Note:
- * 1. all parameters in nanosecond (ns)
- * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
- * in pxa27x and pxa3xx, initialize them to the same value or
- * the larger one will be used
- * 3. same to {rd,wr}_pulse_width
- */
- unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
- unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
- unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
- unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
- unsigned cmd_inh_time; /* Command Inhibit time between two writes */
- unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
- struct pxafb_mode_info *modes;
- unsigned int num_modes;
-
- unsigned int lcd_conn;
-
- u_int fixed_modes:1,
- cmap_inverse:1,
- cmap_static:1,
- unused:29;
-
- /* The following should be defined in LCCR0
- * LCCR0_Act or LCCR0_Pas Active or Passive
- * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
- * LCCR0_Mono or LCCR0_Color Mono/Color
- * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
- * LCCR0_DMADel(Tcpu) (optional) DMA request delay
- *
- * The following should not be defined in LCCR0:
- * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
- * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
- */
- u_int lccr0;
- /* The following should be defined in LCCR3
- * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
- * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
- * LCCR3_Acb(X) AB Bias pin frequency
- * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
- *
- * The following should not be defined in LCCR3
- * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
- */
- u_int lccr3;
- /* The following should be defined in LCCR4
- * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
- *
- * All other bits in LCCR4 should be left alone.
- */
- u_int lccr4;
- void (*pxafb_backlight_power)(int);
- void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
- void (*smart_update)(struct fb_info *);
-};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
deleted file mode 100644
index 820a189..0000000
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <asm/arch/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0 (0x000) /* LCD Controller Control Register 0 */
-#define LCCR1 (0x004) /* LCD Controller Control Register 1 */
-#define LCCR2 (0x008) /* LCD Controller Control Register 2 */
-#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
-#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
-#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
-#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
-#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
-#define LCSR (0x038) /* LCD Controller Status Register */
-#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
-#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
-#define TMEDCR (0x044) /* TMED Control Register */
-
-#define CMDCR (0x100) /* Command Control Register */
-#define PRSR (0x104) /* Panel Read Status Register */
-
-#define LCCR3_1BPP (0 << 24)
-#define LCCR3_2BPP (1 << 24)
-#define LCCR3_4BPP (2 << 24)
-#define LCCR3_8BPP (3 << 24)
-#define LCCR3_16BPP (4 << 24)
-#define LCCR3_18BPP (5 << 24)
-#define LCCR3_18BPP_P (6 << 24)
-#define LCCR3_19BPP (7 << 24)
-#define LCCR3_19BPP_P (1 << 29)
-#define LCCR3_24BPP ((1 << 29) | (1 << 24))
-#define LCCR3_25BPP ((1 << 29) | (2 << 24))
-
-#define LCCR3_PDFOR_0 (0 << 30)
-#define LCCR3_PDFOR_1 (1 << 30)
-#define LCCR3_PDFOR_2 (2 << 30)
-#define LCCR3_PDFOR_3 (3 << 30)
-
-#define LCCR4_PAL_FOR_0 (0 << 15)
-#define LCCR4_PAL_FOR_1 (1 << 15)
-#define LCCR4_PAL_FOR_2 (2 << 15)
-#define LCCR4_PAL_FOR_MASK (3 << 15)
-
-#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
-#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
-#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
-#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
-#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
-
-#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
-#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
-#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
-#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
-#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */
-#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
-#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
-
-#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
-#define LCCR0_SFM (1 << 4) /* Start of frame mask */
-#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
-#define LCCR0_EFM (1 << 6) /* End of Frame mask */
-#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
-#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
-#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
-#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */
-#define LCCR0_DIS (1 << 10) /* LCD Disable */
-#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
-#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
-#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
-#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
-#define LCCR0_LCDT (1 << 22) /* LCD panel type */
-#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
-#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
-#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
-#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
-
-#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S 16
-#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
-#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
-#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
-
-#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */
-#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
-#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
-
-#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
-#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
-
-#define LCCR3_ACB Fld (8, 8) /* AC Bias */
-#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */
-#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */
-
-#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */
-#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */
-
-#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */
-#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */
-
-#define LCSR_LDD (1 << 0) /* LCD Disable Done */
-#define LCSR_SOF (1 << 1) /* Start of frame */
-#define LCSR_BER (1 << 2) /* Bus error */
-#define LCSR_ABC (1 << 3) /* AC Bias count */
-#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
-#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
-#define LCSR_OU (1 << 6) /* output FIFO underrun */
-#define LCSR_QD (1 << 7) /* quick disable */
-#define LCSR_EOF (1 << 8) /* end of frame */
-#define LCSR_BS (1 << 9) /* branch status */
-#define LCSR_SINT (1 << 10) /* subsequent interrupt */
-#define LCSR_RD_ST (1 << 11) /* read status */
-#define LCSR_CMD_INT (1 << 12) /* command interrupt */
-
-#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
-
-/* smartpanel related */
-#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
-#define PRSR_A0 (1 << 8) /* Read Data Source */
-#define PRSR_ST_OK (1 << 9) /* Status OK */
-#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */
-
-#define SMART_CMD_A0 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
-#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
-#define SMART_CMD_NOOP (0x4 << 9)
-#define SMART_CMD_INTERRUPT (0x5 << 9)
-
-#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
deleted file mode 100644
index 6956fc5..0000000
--- a/include/asm-arm/arch-pxa/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/system.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-
-void arch_reset(char mode);
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
deleted file mode 100644
index 8d882f0..0000000
--- a/include/asm-arm/arch-pxa/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/timex.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
deleted file mode 100644
index 27aa3a9..0000000
--- a/include/asm-arm/arch-pxa/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
deleted file mode 100644
index f455126..0000000
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/uncompress.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-
-#define __REG(x) ((volatile unsigned long *)x)
-
-static volatile unsigned long *UART = FFUART;
-
-static inline void putc(char c)
-{
- if (!(UART[UART_IER] & IER_UUE))
- return;
- while (!(UART[UART_LSR] & LSR_TDRQ))
- barrier();
- UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
- if (machine_is_littleton())
- UART = STUART;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h
deleted file mode 100644
index 5bb450c..0000000
--- a/include/asm-arm/arch-pxa/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/vmalloc.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END (0xe8000000)
diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h
deleted file mode 100644
index 206f7a7..0000000
--- a/include/asm-arm/arch-realview/board-eb.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-eb.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include <asm/arch/platform.h>
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */
-#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */
-#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */
-#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */
-#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE 0x40000000
-#define REALVIEW_EB_FLASH_SIZE SZ_64M
-#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */
-#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE 0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE 0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
-#endif
-
-#define IRQ_EB_GIC_START 32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
-#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
-#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
-#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
-#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
-#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
-#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
-#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
-#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
-#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
-#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
-#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
-#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
-#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
-#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
-#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
-#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
-#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2 -1
-#define IRQ_EB11MP_UART3 -1
-#define IRQ_EB11MP_CLCD -1
-#define IRQ_EB11MP_DMA -1
-#define IRQ_EB11MP_WDOG -1
-#define IRQ_EB11MP_GPIO0 -1
-#define IRQ_EB11MP_GPIO1 -1
-#define IRQ_EB11MP_GPIO2 -1
-#define IRQ_EB11MP_SCI -1
-#define IRQ_EB11MP_SSP -1
-
-#define NR_GIC_EB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
- && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
- && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_EB11MP
-#endif
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK 0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000
-#define REALVIEW_EB_PROC_ARM9 0x02000000
-#define REALVIEW_EB_PROC_ARM11 0x04000000
-#define REALVIEW_EB_PROC_ARM11MP 0x06000000
-
-#define check_eb_proc(proc_type) \
- ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
- == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp() 0
-#endif
-
-#endif /* __ASM_ARCH_BOARD_EB_H */
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h
deleted file mode 100644
index 48ce9c8..0000000
--- a/include/asm-arm/arch-realview/board-pb1176.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb1176.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE 0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START 32
-#define IRQ_PB1176_GIC_START 64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
-#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
-#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
-#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
-#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
-#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
-#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
-#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
-#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
-#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
-#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
-#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
-#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
-
-#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
-#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0 -1
-#define IRQ_PB1176_SSP -1
-#define IRQ_PB1176_SCTL -1
-
-#define NR_GIC_PB1176 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB1176
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB1176 */
-
-#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h
deleted file mode 100644
index a1294d9..0000000
--- a/include/asm-arm/arch-realview/board-pb11mp.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb11mp.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE 0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE 0x00000100
-#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START 32
-#define IRQ_PB11MP_GIC_START 64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
-#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
-#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
-#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
-#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
-#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
-#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
-#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
-#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
-#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
-#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC -1
-#define IRQ_PB11MP_SCTL -1
-
-#define NR_GIC_PB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB11MP
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB11MP */
-
-#endif /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
deleted file mode 100644
index c8c860c..0000000
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-realview/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xf0000000 @ virtual base
- orr \rx, \rx, #0x00009000
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
deleted file mode 100644
index 8342e3f..0000000
--- a/include/asm-arm/arch-realview/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/dma.h
- *
- * Copyright (C) 2003 ARM Limited.
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
deleted file mode 100644
index 31a39a7..0000000
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-realview/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/gic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #29
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
deleted file mode 100644
index 1ee8313..0000000
--- a/include/asm-arm/arch-realview/hardware.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/hardware.h
- *
- * This file contains the hardware definitions of the RealView boards.
- *
- * Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000)
-#define __io_address(n) __io(IO_ADDRESS(n))
-
-#endif
diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h
deleted file mode 100644
index c70f1df..0000000
--- a/include/asm-arm/arch-realview/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/io.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
deleted file mode 100644
index ccbac59..0000000
--- a/include/asm-arm/arch-realview/irqs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/irqs.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define IRQ_LOCALTIMER 29
-#define IRQ_LOCALWDOG 30
-
-#define IRQ_GIC_START 32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h
deleted file mode 100644
index ed370ab..0000000
--- a/include/asm-arm/arch-realview/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
deleted file mode 100644
index 424c0aa..0000000
--- a/include/asm-arm/arch-realview/platform.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/platform.h
- *
- * Copyright (c) ARM Limited 2003. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI 0x30000000
-#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */
-#define REALVIEW_BOOT_ROM_SIZE SZ_64M
-
-#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE SZ_2M
-
-/*
- * SDRAM
- */
-#define REALVIEW_SDRAM_BASE 0x00000000
-
-/*
- * Logic expansion modules
- *
- */
-
-
-/* ------------------------------------------------------------------------
- * RealView Registers
- * ------------------------------------------------------------------------
- *
- */
-#define REALVIEW_SYS_ID_OFFSET 0x00
-#define REALVIEW_SYS_SW_OFFSET 0x04
-#define REALVIEW_SYS_LED_OFFSET 0x08
-#define REALVIEW_SYS_OSC0_OFFSET 0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET 0x10
-#define REALVIEW_SYS_OSC2_OFFSET 0x14
-#define REALVIEW_SYS_OSC3_OFFSET 0x18
-#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET 0x20
-#define REALVIEW_SYS_100HZ_OFFSET 0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET 0x40
-#define REALVIEW_SYS_PCICTL_OFFSET 0x44
-#define REALVIEW_SYS_MCI_OFFSET 0x48
-#define REALVIEW_SYS_FLASH_OFFSET 0x4C
-#define REALVIEW_SYS_CLCD_OFFSET 0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET 0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET 0x58
-#define REALVIEW_SYS_24MHz_OFFSET 0x5C
-#define REALVIEW_SYS_MISC_OFFSET 0x60
-#define REALVIEW_SYS_IOSEL_OFFSET 0x70
-#define REALVIEW_SYS_PROCID_OFFSET 0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0
-
-#define REALVIEW_SYS_BASE 0x10000000
-#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04
-#define REALVIEW_SYS_CTRL_RESET_POR 0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC 0x06
-
-#define REALVIEW_SYS_CTRL_LED (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- * RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/*
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4 = build value
- * 3:0 = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
- * SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- * - used to acknowledge and control MMCI and UART interrupts
- */
-#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
-#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */
- /* write 1 to acknowledge and clear */
-#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
-#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */
-#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */
-#define REALVIEW_AACI_BASE 0x10004000 /* Audio */
-#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */
-#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */
-#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */
-#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */
-#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */
-#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */
-#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE 0x42000000
-#define REALVIEW_PCI_MEM_BASE0 0x44000000
-#define REALVIEW_PCI_MEM_BASE1 0x50000000
-#define REALVIEW_PCI_MEM_BASE2 0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE 0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE 0x2C000000
-#define REALVIEW_DOC_SIZE (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE 512
-#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES 32
-#define START_PAGE 0x80
-
-/*
- * LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0 (1 << 0)
-#define REALVIEW_SYS_LED1 (1 << 1)
-#define REALVIEW_SYS_LED2 (1 << 2)
-#define REALVIEW_SYS_LED3 (1 << 3)
-#define REALVIEW_SYS_LED4 (1 << 4)
-#define REALVIEW_SYS_LED5 (1 << 5)
-#define REALVIEW_SYS_LED6 (1 << 6)
-#define REALVIEW_SYS_LED7 (1 << 7)
-
-#define ALL_LEDS 0xFF
-
-#define LED_BANK REALVIEW_SYS_LED
-
-/*
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */
-#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
-#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
-
-/*
- * Application Flash
- *
- */
-#define FLASH_BASE REALVIEW_FLASH_BASE
-#define FLASH_SIZE REALVIEW_FLASH_SIZE
-#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE SZ_128K
-
-/*
- * Boot Flash
- *
- */
-#define EPROM_BASE REALVIEW_BOOT_ROM_HI
-#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE
-#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
-
-/*
- * Clean base - dummy
- *
- */
-#define CLEAN_BASE EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK 0
-#define REALVIEW_TIMCLK 1
-
-#define REALVIEW_TIMER1_EnSel 15
-#define REALVIEW_TIMER2_EnSel 17
-#define REALVIEW_TIMER3_EnSel 19
-#define REALVIEW_TIMER4_EnSel 21
-
-
-#define MAX_TIMER 2
-#define MAX_PERIOD 699050
-#define TICKS_PER_uSEC 1
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-#define REALVIEW_CSR_BASE 0x10000000
-#define REALVIEW_CSR_SIZE 0x10000000
-
-#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h
deleted file mode 100644
index bff3d3f..0000000
--- a/include/asm-arm/arch-realview/system.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
- unsigned int val;
-
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- val = __raw_readl(hdr_ctrl);
- val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
- __raw_writel(val, hdr_ctrl);
-}
-
-#endif
diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h
deleted file mode 100644
index 5b9d82d..0000000
--- a/include/asm-arm/arch-realview/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
deleted file mode 100644
index 3f7ae2e..0000000
--- a/include/asm-arm/arch-realview/uncompress.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
- if (machine_is_realview_eb())
- return REALVIEW_EB_UART0_BASE;
- else if (machine_is_realview_pb11mp())
- return REALVIEW_PB11MP_UART0_BASE;
- else if (machine_is_realview_pb1176())
- return REALVIEW_PB1176_UART0_BASE;
- else
- return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned long base = get_uart_base();
-
- while (AMBA_UART_FR(base) & (1 << 5))
- barrier();
-
- AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base = get_uart_base();
-
- while (AMBA_UART_FR(base) & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h
deleted file mode 100644
index 0ad49af..0000000
--- a/include/asm-arm/arch-realview/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h
deleted file mode 100644
index ecb7733..0000000
--- a/include/asm-arm/arch-rpc/acornfb.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/acornfb.h
- *
- * Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * AcornFB architecture specific code
- */
-
-#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
-
-static inline int
-acornfb_valid_pixrate(struct fb_var_screeninfo *var)
-{
- u_long limit;
-
- if (!var->pixclock)
- return 0;
-
- /*
- * Limits below are taken from RISC OS bandwidthlimit file
- */
- if (current_par.using_vram) {
- if (current_par.vram_half_sam == 2048)
- limit = 6578;
- else
- limit = 13157;
- } else {
- limit = 26315;
- }
-
- return acornfb_bandwidth(var) >= limit;
-}
-
-/*
- * Try to find the best PLL parameters for the pixel clock.
- * This algorithm seems to give best predictable results,
- * and produces the same values as detailed in the VIDC20
- * data sheet.
- */
-static inline u_int
-acornfb_vidc20_find_pll(u_int pixclk)
-{
- u_int r, best_r = 2, best_v = 2;
- int best_d = 0x7fffffff;
-
- for (r = 2; r <= 32; r++) {
- u_int rr, v, p;
- int d;
-
- rr = 41667 * r;
-
- v = (rr + pixclk / 2) / pixclk;
-
- if (v > 32 || v < 2)
- continue;
-
- p = (rr + v / 2) / v;
-
- d = pixclk - p;
-
- if (d < 0)
- d = -d;
-
- if (d < best_d) {
- best_d = d;
- best_v = v - 1;
- best_r = r - 1;
- }
-
- if (d == 0)
- break;
- }
-
- return best_v << 8 | best_r;
-}
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
- struct fb_var_screeninfo *var)
-{
- u_int div;
-
- /* Select pixel-clock divisor to keep PLL in range */
- div = var->pixclock / 9090; /*9921*/
-
- /* Limit divisor */
- if (div == 0)
- div = 1;
- if (div > 8)
- div = 8;
-
- /* Encode divisor to VIDC20 setting */
- switch (div) {
- case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
- case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
- case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
- case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
- case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
- case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
- case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
- case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
- }
-
- /*
- * With VRAM, the FIFO can be set to the highest possible setting
- * because there are no latency considerations for other memory
- * accesses. However, in 64 bit bus mode the FIFO preload value
- * must not be set to VIDC20_CTRL_FIFO_28 because this will let
- * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
- * FIFO preload value).
- */
- if (current_par.using_vram) {
- if (current_par.vram_half_sam == 2048)
- vidc->control |= VIDC20_CTRL_FIFO_24;
- else
- vidc->control |= VIDC20_CTRL_FIFO_28;
- } else {
- unsigned long bandwidth = acornfb_bandwidth(var);
-
- /* Encode bandwidth as VIDC20 setting */
- if (bandwidth > 33334) /* < 30.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_16;
- else if (bandwidth > 26666) /* < 37.5MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_20;
- else if (bandwidth > 22222) /* < 45.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_24;
- else /* > 45.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_28;
- }
-
- /* Find the PLL values */
- vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
-}
-
-#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
-#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
deleted file mode 100644
index c634c8d..0000000
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-rpc/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x03000000
- movne \rx, #0xe0000000
- orr \rx, \rx, #0x00010000
- orr \rx, \rx, #0x00000fe0
- .endm
-
-#define UART_SHIFT 2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h
deleted file mode 100644
index d24a27e..0000000
--- a/include/asm-arm/arch-rpc/dma.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/dma.h
- *
- * Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-#define MAX_DMA_CHANNELS 8
-
-#define DMA_0 0
-#define DMA_1 1
-#define DMA_2 2
-#define DMA_3 3
-#define DMA_S0 4
-#define DMA_S1 5
-#define DMA_VIRTUAL_FLOPPY 6
-#define DMA_VIRTUAL_SOUND 7
-
-#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
deleted file mode 100644
index 5bd5555..0000000
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/arch/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #ioc_base_high @ point at IOC
- .if ioc_base_low
- orr \base, \base, #ioc_base_low
- .endif
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h
deleted file mode 100644
index 7480f4e..0000000
--- a/include/asm-arm/arch-rpc/hardware.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-#ifndef __ASSEMBLY__
-#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
-#else
-#define IOMEM(x) x
-#endif /* __ASSEMBLY__ */
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-#define RAM_SIZE 0x10000000
-#define RAM_START 0x10000000
-
-#define EASI_SIZE 0x08000000 /* EASI I/O */
-#define EASI_START 0x08000000
-#define EASI_BASE 0xe5000000
-
-#define IO_START 0x03000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE IOMEM(0xe0000000)
-
-#define SCREEN_START 0x02000000 /* VRAM */
-#define SCREEN_END 0xdfc00000
-#define SCREEN_BASE 0xdf800000
-
-#define UNCACHEABLE_ADDR 0xdf010000
-
-/*
- * IO Addresses
- */
-#define VIDC_BASE IOMEM(0xe0400000)
-#define EXPMASK_BASE 0xe0360000
-#define IOMD_BASE IOMEM(0xe0200000)
-#define IOC_BASE IOMEM(0xe0200000)
-#define PCIO_BASE IOMEM(0xe0010000)
-#define FLOPPYDMA_BASE IOMEM(0xe002a000)
-
-#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
-
-#define IO_EC_EASI_BASE 0x81400000
-#define IO_EC_IOC4_BASE 0x8009c000
-#define IO_EC_IOC_BASE 0x80090000
-#define IO_EC_MEMC8_BASE 0x8000ac00
-#define IO_EC_MEMC_BASE 0x80000000
-
-#define NETSLOT_BASE 0x0302b000
-#define NETSLOT_SIZE 0x00001000
-
-#define PODSLOT_IOC0_BASE 0x03240000
-#define PODSLOT_IOC4_BASE 0x03270000
-#define PODSLOT_IOC_SIZE (1 << 14)
-#define PODSLOT_MEMC_BASE 0x03000000
-#define PODSLOT_MEMC_SIZE (1 << 14)
-#define PODSLOT_EASI_BASE 0x08000000
-#define PODSLOT_EASI_SIZE (1 << 24)
-
-#define EXPMASK_STATUS (EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
deleted file mode 100644
index 0d10d45..0000000
--- a/include/asm-arm/arch-rpc/io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data. We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o) \
- ({ \
- unsigned int __v, __r = (b); \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2]" \
- : "=r" (__v) \
- : "r" (__r), "Ir" (o)); \
- __v; \
- })
-
-#define __arch_base_getl(b,o) \
- ({ \
- unsigned int __v, __r = (b); \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2]" \
- : "=r" (__v) \
- : "r" (__r), "Ir" (o)); \
- __v; \
- })
-
-#define __arch_base_putb(v,b,o) \
- ({ \
- unsigned int __r = (b); \
- __asm__ __volatile__( \
- "strb %0, [%1, %2]" \
- : \
- : "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o) \
- ({ \
- unsigned int __r = (b); \
- __asm__ __volatile__( \
- "str %0, [%1, %2]" \
- : \
- : "r" (v), "r" (__r), "Ir" (o));\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO. Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions.
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "strb %1, [%0, %2, lsl #2] @ outb"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outw"
- : "=&r" (temp)
- : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outl"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "tst %2, #0x80000000\n\t" \
- "mov %0, %4\n\t" \
- "addeq %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline void __iomem *__deprecated __ioaddr(unsigned int port)
-{
- void __iomem *ret;
- if (__PORT_PCIO(port))
- ret = PCIO_BASE;
- else
- ret = IO_BASE;
- return ret + (port << 2);
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long __v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result & 0xffff; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long __v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __ioaddrc(port) __ioaddr(port)
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port) ((unsigned long)__ioaddr((port)))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x) (x)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h
deleted file mode 100644
index 27c35b0..0000000
--- a/include/asm-arm/arch-rpc/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/irqs.h
- *
- * Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define IRQ_PRINTER 0
-#define IRQ_BATLOW 1
-#define IRQ_FLOPPYINDEX 2
-#define IRQ_VSYNCPULSE 3
-#define IRQ_POWERON 4
-#define IRQ_TIMER0 5
-#define IRQ_TIMER1 6
-#define IRQ_IMMEDIATE 7
-#define IRQ_EXPCARDFIQ 8
-#define IRQ_HARDDISK 9
-#define IRQ_SERIALPORT 10
-#define IRQ_FLOPPYDISK 12
-#define IRQ_EXPANSIONCARD 13
-#define IRQ_KEYBOARDTX 14
-#define IRQ_KEYBOARDRX 15
-
-#define IRQ_DMA0 16
-#define IRQ_DMA1 17
-#define IRQ_DMA2 18
-#define IRQ_DMA3 19
-#define IRQ_DMAS0 20
-#define IRQ_DMAS1 21
-
-#define FIQ_FLOPPYDATA 0
-#define FIQ_ECONET 2
-#define FIQ_SERIALPORT 4
-#define FIQ_EXPANSIONCARD 6
-#define FIQ_FORCE 7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
-
-#define IRQ_TIMER IRQ_TIMER0
-
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
deleted file mode 100644
index 303c424..0000000
--- a/include/asm-arm/arch-rpc/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 11-Jan-1998 RMK Uninlined to reduce hits on cache
- * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x00000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h
deleted file mode 100644
index ca3277d..0000000
--- a/include/asm-arm/arch-rpc/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- iomd_writeb(0, IOMD_ROMCR0);
-
- /*
- * Jump into the ROM
- */
- cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h
deleted file mode 100644
index ed7df64..0000000
--- a/include/asm-arm/arch-rpc/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE 2000000
-
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h
deleted file mode 100644
index 844e4d4..0000000
--- a/include/asm-arm/arch-rpc/uncompress.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/uncompress.h
- *
- * Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)SCREEN_START)
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
- unsigned long page_size;
- unsigned long nr_pages;
- unsigned long ramdisk_size;
- unsigned long mountrootrdonly;
- unsigned long rootdev;
- unsigned long video_num_cols;
- unsigned long video_num_rows;
- unsigned long video_x;
- unsigned long video_y;
- unsigned long memc_control_reg;
- unsigned char sounddefault;
- unsigned char adfsdrives;
- unsigned char bytes_per_char_h;
- unsigned char bytes_per_char_v;
- unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
- 0x00000000,
- 0x000000cc,
- 0x0000cc00, /* Green */
- 0x0000cccc, /* Yellow */
- 0x00cc0000, /* Blue */
- 0x00cc00cc, /* Magenta */
- 0x00cccc00, /* Cyan */
- 0x00cccccc, /* White */
- 0x00000000,
- 0x000000ff,
- 0x0000ff00,
- 0x0000ffff,
- 0x00ff0000,
- 0x00ff00ff,
- 0x00ffff00,
- 0x00ffffff
-};
-
-#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG
-static unsigned long video_num_cols;
-static unsigned long video_num_rows;
-static unsigned long video_x;
-static unsigned long video_y;
-static unsigned char bytes_per_char_v;
-static int white;
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
- extern void ll_write_char(char *, char c, char white);
- int x,y;
- char *ptr;
-
- x = video_x;
- y = video_y;
-
- if (c == '\n') {
- if (++y >= video_num_rows)
- y--;
- } else if (c == '\r') {
- x = 0;
- } else {
- ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
- ll_write_char(ptr, c, white);
- if (++x >= video_num_cols) {
- x = 0;
- if ( ++y >= video_num_rows ) {
- y--;
- }
- }
- }
-
- video_x = x;
- video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-static void error(char *x);
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
- int i;
- struct tag *t = (struct tag *)params;
- unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
- if (t->hdr.tag == ATAG_CORE)
- {
- for (; t->hdr.size; t = tag_next(t))
- {
- if (t->hdr.tag == ATAG_VIDEOTEXT)
- {
- video_num_rows = t->u.videotext.video_lines;
- video_num_cols = t->u.videotext.video_cols;
- bytes_per_char_h = t->u.videotext.video_points;
- bytes_per_char_v = t->u.videotext.video_points;
- video_x = t->u.videotext.x;
- video_y = t->u.videotext.y;
- }
-
- if (t->hdr.tag == ATAG_MEM)
- {
- page_size = PAGE_SIZE;
- nr_pages += (t->u.mem.size / PAGE_SIZE);
- }
- }
- }
- else
- {
- nr_pages = params->nr_pages;
- page_size = params->page_size;
- video_num_rows = params->video_num_rows;
- video_num_cols = params->video_num_cols;
- video_x = params->video_x;
- video_y = params->video_y;
- bytes_per_char_h = params->bytes_per_char_h;
- bytes_per_char_v = params->bytes_per_char_v;
- }
-
- video_size_row = video_num_cols * bytes_per_char_h;
-
- if (bytes_per_char_h == 4)
- for (i = 0; i < 256; i++)
- con_charconvtable[i] =
- (i & 128 ? 1 << 0 : 0) |
- (i & 64 ? 1 << 4 : 0) |
- (i & 32 ? 1 << 8 : 0) |
- (i & 16 ? 1 << 12 : 0) |
- (i & 8 ? 1 << 16 : 0) |
- (i & 4 ? 1 << 20 : 0) |
- (i & 2 ? 1 << 24 : 0) |
- (i & 1 ? 1 << 28 : 0);
- else
- for (i = 0; i < 16; i++)
- con_charconvtable[i] =
- (i & 8 ? 1 << 0 : 0) |
- (i & 4 ? 1 << 8 : 0) |
- (i & 2 ? 1 << 16 : 0) |
- (i & 1 ? 1 << 24 : 0);
-
-
- palette_setpixel(0);
- if (bytes_per_char_h == 1) {
- palette_write (0);
- palette_write (0x00ffffff);
- for (i = 2; i < 256; i++)
- palette_write (0);
- white = 1;
- } else {
- for (i = 0; i < 256; i++)
- palette_write (i < 16 ? palette_4[i] : 0);
- white = 7;
- }
-
- if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h
deleted file mode 100644
index 077046b..0000000
--- a/include/asm-arm/arch-rpc/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/vmalloc.h
- *
- * Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h
deleted file mode 100644
index 1184d90..0000000
--- a/include/asm-arm/arch-s3c2400/map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/map.h
- *
- * Copyright 2003,2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright 2003, Lucas Correia Villa Real
- *
- * S3C2400 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C2400_PA_MEMCTRL (0x14000000)
-#define S3C2400_PA_USBHOST (0x14200000)
-#define S3C2400_PA_IRQ (0x14400000)
-#define S3C2400_PA_DMA (0x14600000)
-#define S3C2400_PA_CLKPWR (0x14800000)
-#define S3C2400_PA_LCD (0x14A00000)
-#define S3C2400_PA_UART (0x15000000)
-#define S3C2400_PA_TIMER (0x15100000)
-#define S3C2400_PA_USBDEV (0x15200140)
-#define S3C2400_PA_WATCHDOG (0x15300000)
-#define S3C2400_PA_IIC (0x15400000)
-#define S3C2400_PA_IIS (0x15508000)
-#define S3C2400_PA_GPIO (0x15600000)
-#define S3C2400_PA_RTC (0x15700040)
-#define S3C2400_PA_ADC (0x15800000)
-#define S3C2400_PA_SPI (0x15900000)
-
-#define S3C2400_PA_MMC (0x15A00000)
-#define S3C2400_SZ_MMC SZ_1M
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2400_CS0 (0x00000000)
-#define S3C2400_CS1 (0x02000000)
-#define S3C2400_CS2 (0x04000000)
-#define S3C2400_CS3 (0x06000000)
-#define S3C2400_CS4 (0x08000000)
-#define S3C2400_CS5 (0x0A000000)
-#define S3C2400_CS6 (0x0C000000)
-#define S3C2400_CS7 (0x0E000000)
-
-#define S3C2400_SDRAM_PA (S3C2400_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD S3C2400_PA_LCD
-#define S3C24XX_PA_UART S3C2400_PA_UART
-#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC S3C2400_PA_IIC
-#define S3C24XX_PA_IIS S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC S3C2400_PA_RTC
-#define S3C24XX_PA_ADC S3C2400_PA_ADC
-#define S3C24XX_PA_SPI S3C2400_PA_SPI
diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h
deleted file mode 100644
index fb0381d..0000000
--- a/include/asm-arm/arch-s3c2400/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/memory.h
- * from linux/include/asm-arm/arch-rpc/memory.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x0C000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h
deleted file mode 100644
index 168b93f..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL (0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h
deleted file mode 100644
index cd77a70..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0 IRQ_EINT2
-#define IRQ_IDE1 IRQ_EINT3
-#define IRQ_ASIX IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h
deleted file mode 100644
index 830d114..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
-#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
-#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
deleted file mode 100644
index 0a6977f..0000000
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/audio.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://www.simtec.co.uk/products/SWLINUX/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
-
-struct s3c24xx_iis_ops {
- struct module *owner;
-
- int (*startup)(struct s3c24xx_iis_ops *me);
- void (*shutdown)(struct s3c24xx_iis_ops *me);
- int (*suspend)(struct s3c24xx_iis_ops *me);
- int (*resume)(struct s3c24xx_iis_ops *me);
-
- int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
- int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
- int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
-};
-
-struct s3c24xx_platdata_iis {
- const char *codec_clk;
- struct s3c24xx_iis_ops *ops;
- int (*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
deleted file mode 100644
index 034d2c5..0000000
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF (0x00)
-#define BAST_CPLD_CTRL1_LRCADC (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC (0x02)
-#define BAST_CPLD_CTRL1_LRCARM (0x03)
-#define BAST_CPLD_CTRL1_LRMASK (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND (0x04)
-#define BAST_CPLD_CTLR2_IDERST (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT (0x01)
-#define BAST_CPLD_CTRL4_LCDRW (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD (0x04)
-#define BAST_CPLD_CTRL4_LCDE2 (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE (0<<0)
-#define BAST_CPLD_DMA0_SECIDE (1<<0)
-#define BAST_CPLD_DMA0_ISA15 (2<<0)
-#define BAST_CPLD_DMA0_ISA36 (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE (0<<2)
-#define BAST_CPLD_DMA1_SECIDE (1<<2)
-#define BAST_CPLD_DMA1_ISA15 (2<<2)
-#define BAST_CPLD_DMA1_ISA36 (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
deleted file mode 100644
index 726c046..0000000
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT18
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_PCSERIAL1 IRQ_EINT15
-#define IRQ_PCSERIAL2 IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX IRQ_EINT11
-#define IRQ_DM9000 IRQ_EINT10
-#define IRQ_ISA IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
deleted file mode 100644
index 86ac1c1..0000000
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-map.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
-#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
-#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
-#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
-#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1 (0x8800000)
-#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1 (0x8000000)
-#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1 (0x9800000)
-#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1 (0x9000000)
-#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2 (0xA800000)
-#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2 (0xA000000)
-#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2 (0xB800000)
-#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2 (0xB000000)
-#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO (0x00000000)
-#define BAST_PA_ASIXNET (0x01000000)
-#define BAST_PA_SUPERIO (0x01800000)
-#define BAST_PA_IDEPRI (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM (0x04000000)
-#define BAST_PA_DM9000 (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/* */
-
-#define BAST_ASIXNET_CS BAST_VAM_CS5
-#define BAST_IDE_CS BAST_VAM_CS5
-#define BAST_DM9000_CS BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
deleted file mode 100644
index 37a11fe5..0000000
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- *
- * Machine BAST - Power Management chip
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTPMU_H
-#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
-
-#define BASTPMU_REG_IDENT (0x00)
-#define BASTPMU_REG_VERSION (0x01)
-#define BASTPMU_REG_DDCCTRL (0x02)
-#define BASTPMU_REG_POWER (0x03)
-#define BASTPMU_REG_RESET (0x04)
-#define BASTPMU_REG_GWO (0x05)
-#define BASTPMU_REG_WOL (0x06)
-#define BASTPMU_REG_WOR (0x07)
-#define BASTPMU_REG_UID (0x09)
-
-#define BASTPMU_EEPROM (0xC0)
-
-#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0)
-#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8)
-#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9)
-
-#define BASTPMU_IDENT_0 0x53
-#define BASTPMU_IDENT_1 0x42
-#define BASTPMU_IDENT_2 0x50
-#define BASTPMU_IDENT_3 0x4d
-
-#define BASTPMU_RESET_GUARD (0x55)
-
-#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644
index 89076c3..0000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2005 Simtec Electronics
- *
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C24XX_PA_UART
- ldrne \rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
- .macro fifo_full_s3c24xx rd, rx
- @ check for arm920 vs arm926. currently assume all arm926
- @ devices have an 64 byte FIFO identical to the s3c2440
- mrc p15, 0, \rd, c0, c0
- and \rd, \rd, #0xff0
- teq \rd, #0x260
- beq 1004f
- mrc p15, 0, \rd, c1, c0
- tst \rd, #1
- addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
- addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
- bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
- and \rd, \rd, #0x00ff0000
- teq \rd, #0x00440000 @ is it 2440?
-1004:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
- moveq \rd, \rd, lsr #SHIFT_2440TXF
- tst \rd, #S3C2410_UFSTAT_TXFULL
- .endm
-
- .macro fifo_full_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
- tst \rd, #S3C2410_UFSTAT_TXFULL
- .endm
-
-/* fifo level reading */
-
- .macro fifo_level_s3c24xx rd, rx
- @ check for arm920 vs arm926. currently assume all arm926
- @ devices have an 64 byte FIFO identical to the s3c2440
- mrc p15, 0, \rd, c0, c0
- and \rd, \rd, #0xff0
- teq \rd, #0x260
- beq 10000f
- mrc p15, 0, \rd, c1, c0
- tst \rd, #1
- addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
- addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
- bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
- and \rd, \rd, #0x00ff0000
- teq \rd, #0x00440000 @ is it 2440?
-
-10000:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
- andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
- andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
- .endm
-
- .macro fifo_level_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
- and \rd, \rd, #S3C2410_UFSTAT_TXMASK
- .endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <asm/plat-s3c/debug-macro.S>
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
deleted file mode 100644
index 86eaa0c..0000000
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/dma.h
- *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C241XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS 0x40000000
-#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
- DMACH_XD0,
- DMACH_XD1,
- DMACH_SDI,
- DMACH_SPI0,
- DMACH_SPI1,
- DMACH_UART0,
- DMACH_UART1,
- DMACH_UART2,
- DMACH_TIMER,
- DMACH_I2S_IN,
- DMACH_I2S_OUT,
- DMACH_PCM_IN,
- DMACH_PCM_OUT,
- DMACH_MIC_IN,
- DMACH_USB_EP1,
- DMACH_USB_EP2,
- DMACH_USB_EP3,
- DMACH_USB_EP4,
- DMACH_UART0_SRC2, /* s3c2412 second uart sources */
- DMACH_UART1_SRC2,
- DMACH_UART2_SRC2,
- DMACH_UART3, /* s3c2443 has extra uart */
- DMACH_UART3_SRC2,
- DMACH_MAX, /* the end entry */
-};
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS (4)
-#else
-#define S3C2410_DMA_CHANNELS (6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
- S3C2410_DMA_IDLE,
- S3C2410_DMA_RUNNING,
- S3C2410_DMA_PAUSED
-};
-
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
- S3C2410_DMALOAD_NONE,
- S3C2410_DMALOAD_1LOADED,
- S3C2410_DMALOAD_1RUNNING,
- S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-enum s3c2410_dma_buffresult {
- S3C2410_RES_OK,
- S3C2410_RES_ERR,
- S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
- S3C2410_DMASRC_HW, /* source is memory */
- S3C2410_DMASRC_MEM /* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
- S3C2410_DMAOP_START,
- S3C2410_DMAOP_STOP,
- S3C2410_DMAOP_PAUSE,
- S3C2410_DMAOP_RESUME,
- S3C2410_DMAOP_FLUSH,
- S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
- S3C2410_DMAOP_STARTED, /* indicate channel started */
-};
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about
- * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
-
-/* dma buffer */
-
-struct s3c2410_dma_client {
- char *name;
-};
-
-/* s3c2410_dma_buf_s
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf;
-struct s3c2410_dma_buf {
- struct s3c2410_dma_buf *next;
- int magic; /* magic */
- int size; /* buffer size in bytes */
- dma_addr_t data; /* start of DMA data */
- dma_addr_t ptr; /* where the DMA got to [1] */
- void *id; /* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
- void *buf, int size,
- enum s3c2410_dma_buffresult result);
-
-typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
- enum s3c2410_chan_op );
-
-struct s3c2410_dma_stats {
- unsigned long loads;
- unsigned long timeout_longest;
- unsigned long timeout_shortest;
- unsigned long timeout_avg;
- unsigned long timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
- /* channel state flags and information */
- unsigned char number; /* number of this dma channel */
- unsigned char in_use; /* channel allocated */
- unsigned char irq_claimed; /* irq claimed for channel */
- unsigned char irq_enabled; /* irq enabled for channel */
- unsigned char xfer_unit; /* size of an transfer */
-
- /* channel state */
-
- enum s3c2410_dma_state state;
- enum s3c2410_dma_loadst load_state;
- struct s3c2410_dma_client *client;
-
- /* channel configuration */
- enum s3c2410_dmasrc source;
- unsigned long dev_addr;
- unsigned long load_timeout;
- unsigned int flags; /* channel flags */
- unsigned int hw_cfg; /* last hw config */
-
- struct s3c24xx_dma_map *map; /* channel hw maps */
-
- /* channel's hardware position and configuration */
- void __iomem *regs; /* channels registers */
- void __iomem *addr_reg; /* data address register */
- unsigned int irq; /* channel irq */
- unsigned long dcon; /* default value of DCON */
-
- /* driver handles */
- s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
- s3c2410_dma_opfn_t op_fn; /* channel op callback */
-
- /* stats gathering */
- struct s3c2410_dma_stats *stats;
- struct s3c2410_dma_stats stats_store;
-
- /* buffer list and information */
- struct s3c2410_dma_buf *curr; /* current dma buffer */
- struct s3c2410_dma_buf *next; /* next buffer to load */
- struct s3c2410_dma_buf *end; /* end of queue */
-
- /* system device */
- struct sys_device dev;
-};
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
-typedef unsigned long dma_device_t;
-
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(dmach_t channel,
- struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(dmach_t channel,
- unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
- dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
- int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(dmach_t channel,
- dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC (0x00)
-#define S3C2410_DMA_DISRCC (0x04)
-#define S3C2410_DMA_DIDST (0x08)
-#define S3C2410_DMA_DIDSTC (0x0C)
-#define S3C2410_DMA_DCON (0x10)
-#define S3C2410_DMA_DSTAT (0x14)
-#define S3C2410_DMA_DCSRC (0x18)
-#define S3C2410_DMA_DCDST (0x1C)
-#define S3C2410_DMA_DMASKTRIG (0x20)
-#define S3C2412_DMA_DMAREQSEL (0x24)
-#define S3C2443_DMA_DMAREQSEL (0x24)
-
-#define S3C2410_DISRCC_INC (1<<0)
-#define S3C2410_DISRCC_APB (1<<1)
-
-#define S3C2410_DMASKTRIG_STOP (1<<2)
-#define S3C2410_DMASKTRIG_ON (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND (0<<31)
-#define S3C2410_DCON_HANDSHAKE (1<<31)
-#define S3C2410_DCON_SYNC_PCLK (0<<30)
-#define S3C2410_DCON_SYNC_HCLK (1<<30)
-
-#define S3C2410_DCON_INTREQ (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
-#define S3C2410_DCON_CH0_UART0 (1<<24)
-#define S3C2410_DCON_CH0_SDI (2<<24)
-#define S3C2410_DCON_CH0_TIMER (3<<24)
-#define S3C2410_DCON_CH0_USBEP1 (4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
-#define S3C2410_DCON_CH1_UART1 (1<<24)
-#define S3C2410_DCON_CH1_I2SSDI (2<<24)
-#define S3C2410_DCON_CH1_SPI (3<<24)
-#define S3C2410_DCON_CH1_USBEP2 (4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO (0<<24)
-#define S3C2410_DCON_CH2_I2SSDI (1<<24)
-#define S3C2410_DCON_CH2_SDI (2<<24)
-#define S3C2410_DCON_CH2_TIMER (3<<24)
-#define S3C2410_DCON_CH2_USBEP3 (4<<24)
-
-#define S3C2410_DCON_CH3_UART2 (0<<24)
-#define S3C2410_DCON_CH3_SDI (1<<24)
-#define S3C2410_DCON_CH3_SPI (2<<24)
-#define S3C2410_DCON_CH3_TIMER (3<<24)
-#define S3C2410_DCON_CH3_USBEP4 (4<<24)
-
-#define S3C2410_DCON_SRCSHIFT (24)
-#define S3C2410_DCON_SRCMASK (7<<24)
-
-#define S3C2410_DCON_BYTE (0<<20)
-#define S3C2410_DCON_HALFWORD (1<<20)
-#define S3C2410_DCON_WORD (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD (1<<22)
-#define S3C2410_DCON_HWTRIG (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT (1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO (5<<24)
-#define S3C2440_DCON_CH0_PCMIN (6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT (5<<24)
-#define S3C2440_DCON_CH1_SDI (6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN (5<<24)
-#define S3C2440_DCON_CH2_MICIN (6<<24)
-
-#define S3C2440_DCON_CH3_MICIN (5<<24)
-#define S3C2440_DCON_CH3_PCMOUT (6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW (1)
-
-#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW (1)
-
-#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
deleted file mode 100644
index f70d051..0000000
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND (0x10)
-#define INTOFFSET (0x14)
-
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #S3C24XX_VA_IRQ
-
- @@ try the interrupt offset register, since it is there
-
- ldr \irqstat, [ \base, #INTPND ]
- teq \irqstat, #0
- beq 1002f
- ldr \irqnr, [ \base, #INTOFFSET ]
- mov \tmp, #1
- tst \irqstat, \tmp, lsl \irqnr
- bne 1001f
-
- @@ the number specified is not a valid irq, so try
- @@ and work it out for ourselves
-
- mov \irqnr, #0 @@ start here
-
- @@ work out which irq (if any) we got
-
- movs \tmp, \irqstat, lsl#16
- addeq \irqnr, \irqnr, #16
- moveq \irqstat, \irqstat, lsr#16
- tst \irqstat, #0xff
- addeq \irqnr, \irqnr, #8
- moveq \irqstat, \irqstat, lsr#8
- tst \irqstat, #0xf
- addeq \irqnr, \irqnr, #4
- moveq \irqstat, \irqstat, lsr#4
- tst \irqstat, #0x3
- addeq \irqnr, \irqnr, #2
- moveq \irqstat, \irqstat, lsr#2
- tst \irqstat, #0x1
- addeq \irqnr, \irqnr, #1
-
- @@ we have the value
-1001:
- adds \irqnr, \irqnr, #IRQ_EINT0
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
deleted file mode 100644
index 5d026260..0000000
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <asm/arch/regs-lcd.h>
-
-struct s3c2410fb_hw {
- unsigned long lcdcon1;
- unsigned long lcdcon2;
- unsigned long lcdcon3;
- unsigned long lcdcon4;
- unsigned long lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
- /* LCD type */
- unsigned type;
-
- /* Screen size */
- unsigned short width;
- unsigned short height;
-
- /* Screen info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned pixclock; /* pixclock in picoseconds */
- unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
-
- /* lcd configuration registers */
- unsigned long lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
- struct s3c2410fb_display *displays; /* attached diplays info */
- unsigned num_displays; /* number of defined displays */
- unsigned default_display;
-
- /* GPIOs */
-
- unsigned long gpcup;
- unsigned long gpcup_mask;
- unsigned long gpccon;
- unsigned long gpccon_mask;
- unsigned long gpdup;
- unsigned long gpdup_mask;
- unsigned long gpdcon;
- unsigned long gpdcon_mask;
-
- /* lpc3600 control register */
- unsigned long lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
deleted file mode 100644
index 18e10d2..0000000
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/gpio.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
deleted file mode 100644
index c3de5ab..0000000
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * iPAQ H1940 series - latch definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
-
-
-#ifndef __ASSEMBLY__
-#define H1940_LATCH ((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH 0xF8000000
-#endif
-
-#define H1940_PA_LATCH (S3C2410_CS2)
-
-/* SD layer latch */
-
-#define H1940_LATCH_SDQ1 (1<<16)
-#define H1940_LATCH_LCD_P1 (1<<17)
-#define H1940_LATCH_LCD_P2 (1<<18)
-#define H1940_LATCH_LCD_P3 (1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
-#define H1940_LATCH_LED_RED (1<<21)
-#define H1940_LATCH_SDQ7 (1<<22)
-#define H1940_LATCH_USB_DP (1<<23)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER (1<<24)
-#define H1940_LATCH_AUDIO_POWER (1<<25)
-#define H1940_LATCH_SM803_ENABLE (1<<26)
-#define H1940_LATCH_LCD_P4 (1<<27)
-#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
-#define H1940_LATCH_LED_GREEN (1<<30)
-#define H1940_LATCH_LED_FLASH (1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT \
- H1940_LATCH_LCD_P4 | \
- H1940_LATCH_SM803_ENABLE | \
- H1940_LATCH_SDQ1 | \
- H1940_LATCH_LCD_P1 | \
- H1940_LATCH_LCD_P2 | \
- H1940_LATCH_LCD_P3 | \
- H1940_LATCH_MAX1698_nSHUTDOWN | \
- H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
-
-#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h
deleted file mode 100644
index 6135592..0000000
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT (0x30081000)
-#define H1940_SUSPEND_CHECK (0x30080000)
-
-extern void h1940_pm_return(void);
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
deleted file mode 100644
index 6dd10be..0000000
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/hardware.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- * < 0 = no pin
- * >=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- * < 0 => error code
- * 0 => enabled
- * 1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/sizes.h>
-#include <asm/arch/map.h>
-
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
deleted file mode 100644
index eed4506..0000000
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
deleted file mode 100644
index 3756c99..0000000
--- a/include/asm-arm/arch-s3c2410/io.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/io.h
- * from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- * (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
- * and are translated to the start of IO. Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x) ((x) < (1<<28))
-
-#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
- unsigned long temp; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
- : "=&r" (temp) \
- : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
- return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr) \
- DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, #0] @ outbc" \
- : : "r" (value), "r" ((port))); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, #0] @ inbc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + (port))); \
- } else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256 ) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE), \
- "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port)))); \
- } else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, #0] @ outlc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, #0] @ inlc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port) __ioaddr((port))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x) (x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
deleted file mode 100644
index f5435d8..0000000
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#ifndef __ASM_ARM_IRQ_H
-#error "Do not include this directly, instead #include <asm/irq.h>"
-#endif
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
-#define IRQ_EINT1 S3C2410_IRQ(1)
-#define IRQ_EINT2 S3C2410_IRQ(2)
-#define IRQ_EINT3 S3C2410_IRQ(3)
-#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
-#define IRQ_EINT8t23 S3C2410_IRQ(5)
-#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
-#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT S3C2410_IRQ(7)
-#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
-#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0 S3C2410_IRQ(10)
-#define IRQ_TIMER1 S3C2410_IRQ(11)
-#define IRQ_TIMER2 S3C2410_IRQ(12)
-#define IRQ_TIMER3 S3C2410_IRQ(13)
-#define IRQ_TIMER4 S3C2410_IRQ(14)
-#define IRQ_UART2 S3C2410_IRQ(15)
-#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
-#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1 S3C2410_IRQ(18)
-#define IRQ_DMA2 S3C2410_IRQ(19)
-#define IRQ_DMA3 S3C2410_IRQ(20)
-#define IRQ_SDI S3C2410_IRQ(21)
-#define IRQ_SPI0 S3C2410_IRQ(22)
-#define IRQ_UART1 S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
-#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
-#define IRQ_USBD S3C2410_IRQ(25)
-#define IRQ_USBH S3C2410_IRQ(26)
-#define IRQ_IIC S3C2410_IRQ(27)
-#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
-#define IRQ_SPI1 S3C2410_IRQ(29)
-#define IRQ_RTC S3C2410_IRQ(30)
-#define IRQ_ADCPARENT S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
-#define IRQ_EINT5 S3C2410_IRQ(33)
-#define IRQ_EINT6 S3C2410_IRQ(34)
-#define IRQ_EINT7 S3C2410_IRQ(35)
-#define IRQ_EINT8 S3C2410_IRQ(36)
-#define IRQ_EINT9 S3C2410_IRQ(37)
-#define IRQ_EINT10 S3C2410_IRQ(38)
-#define IRQ_EINT11 S3C2410_IRQ(39)
-#define IRQ_EINT12 S3C2410_IRQ(40)
-#define IRQ_EINT13 S3C2410_IRQ(41)
-#define IRQ_EINT14 S3C2410_IRQ(42)
-#define IRQ_EINT15 S3C2410_IRQ(43)
-#define IRQ_EINT16 S3C2410_IRQ(44)
-#define IRQ_EINT17 S3C2410_IRQ(45)
-#define IRQ_EINT18 S3C2410_IRQ(46)
-#define IRQ_EINT19 S3C2410_IRQ(47)
-#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
-#define IRQ_EINT21 S3C2410_IRQ(49)
-#define IRQ_EINT22 S3C2410_IRQ(50)
-#define IRQ_EINT23 S3C2410_IRQ(51)
-
-
-#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME S3C2410_IRQ(53)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
-
-#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
-#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
-#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
-#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
-
-#define IRQ_TC S3C2410_IRQSUB(9)
-#define IRQ_ADC S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
-#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
-#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
-#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
-
-#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
-
-#ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
-#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h
deleted file mode 100644
index 800846e..0000000
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
-
-struct s3c24xx_led_platdata {
- unsigned int gpio;
- unsigned int flags;
-
- char *name;
- char *def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
deleted file mode 100644
index b33ed3b..0000000
--- a/include/asm-arm/arch-s3c2410/map.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/map.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <asm/plat-s3c/map.h>
-
-#define S3C2410_ADDR(x) S3C_ADDR(x)
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
-
-/* DMA controller */
-#define S3C2410_PA_DMA (0x4B000000)
-#define S3C24XX_SZ_DMA SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C2410_PA_CLKPWR (0x4C000000)
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* LCD controller */
-#define S3C2410_PA_LCD (0x4D000000)
-#define S3C24XX_SZ_LCD SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND (0x4E000000)
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC (0x54000000)
-#define S3C24XX_SZ_IIC SZ_1M
-
-/* IIS controller */
-#define S3C2410_PA_IIS (0x55000000)
-#define S3C24XX_SZ_IIS SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-/* RTC */
-#define S3C2410_PA_RTC (0x57000000)
-#define S3C24XX_SZ_RTC SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC (0x58000000)
-#define S3C24XX_SZ_ADC SZ_1M
-
-/* SPI */
-#define S3C2410_PA_SPI (0x59000000)
-#define S3C24XX_SZ_SPI SZ_1M
-
-/* SDI */
-#define S3C2410_PA_SDI (0x5A000000)
-#define S3C24XX_SZ_SDI SZ_1M
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF (0x4F000000)
-#define S3C2440_SZ_CAMIF SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97 (0x5B000000)
-#define S3C2440_SZ_AC97 SZ_1M
-
-/* S3C2443 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC (0x4A800000)
-#define S3C2443_SZ_HSMMC (256)
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
-#define S3C24XX_PA_DMA S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
-#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC S3C2410_PA_IIC
-#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
-#define S3C24XX_PA_RTC S3C2410_PA_RTC
-#define S3C24XX_PA_ADC S3C2410_PA_ADC
-#define S3C24XX_PA_SPI S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
deleted file mode 100644
index 533e243..0000000
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/memory.h
- * from linux/include/asm-arm/arch-rpc/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x30000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
deleted file mode 100644
index 229ab23..0000000
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL (0x3)
-#define OSIRIS_CTRL0_BOOT_INT (1<<3)
-#define OSIRIS_CTRL0_PCMCIA (1<<4)
-#define OSIRIS_CTRL0_FIX8 (1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
-
-#define OSIRIS_CTRL1_FIX8 (1<<0)
-
-#define OSIRIS_ID_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
deleted file mode 100644
index b5c74d2..0000000
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
- *
- * (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
deleted file mode 100644
index e40c934..0000000
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- * guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
deleted file mode 100644
index 3766135..0000000
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE (1<<2)
-#define S3C2410_CLKCON_POWER (1<<3)
-#define S3C2410_CLKCON_NAND (1<<4)
-#define S3C2410_CLKCON_LCDC (1<<5)
-#define S3C2410_CLKCON_USBH (1<<6)
-#define S3C2410_CLKCON_USBD (1<<7)
-#define S3C2410_CLKCON_PWMT (1<<8)
-#define S3C2410_CLKCON_SDI (1<<9)
-#define S3C2410_CLKCON_UART0 (1<<10)
-#define S3C2410_CLKCON_UART1 (1<<11)
-#define S3C2410_CLKCON_UART2 (1<<12)
-#define S3C2410_CLKCON_GPIO (1<<13)
-#define S3C2410_CLKCON_RTC (1<<14)
-#define S3C2410_CLKCON_ADC (1<<15)
-#define S3C2410_CLKCON_IIC (1<<16)
-#define S3C2410_CLKCON_IIS (1<<17)
-#define S3C2410_CLKCON_SPI (1<<18)
-
-#define S3C2410_PLLCON_MDIVSHIFT 12
-#define S3C2410_PLLCON_PDIVSHIFT 4
-#define S3C2410_PLLCON_SDIVSHIFT 0
-#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK 3
-
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
-#define S3C2410_CLKDIVN_PDIVN (1<<0)
-#define S3C2410_CLKDIVN_HDIVN (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
-#define S3C2410_CLKSLOW_SLOW (1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
-
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2410_PLLCON_MDIVMASK;
- pdiv &= S3C2410_PLLCON_PDIVMASK;
- sdiv &= S3C2410_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA (1<<19)
-#define S3C2440_CLKCON_AC97 (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
-#define S3C2440_CLKDIVN_UCLK (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
-#define S3C2440_CAMDIVN_DVSEN (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-
-#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF (1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN (1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
-#define S3C2412_CLKDIVN_DVSEN (1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
-#define S3C2412_CLKDIVN_USB48DIV (1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
-
-#define S3C2412_CLKCON_WDT (1<<28)
-#define S3C2412_CLKCON_SPI (1<<27)
-#define S3C2412_CLKCON_IIS (1<<26)
-#define S3C2412_CLKCON_IIC (1<<25)
-#define S3C2412_CLKCON_ADC (1<<24)
-#define S3C2412_CLKCON_RTC (1<<23)
-#define S3C2412_CLKCON_GPIO (1<<22)
-#define S3C2412_CLKCON_UART2 (1<<21)
-#define S3C2412_CLKCON_UART1 (1<<20)
-#define S3C2412_CLKCON_UART0 (1<<19)
-#define S3C2412_CLKCON_SDI (1<<18)
-#define S3C2412_CLKCON_PWMT (1<<17)
-#define S3C2412_CLKCON_USBD (1<<16)
-#define S3C2412_CLKCON_CAMCLK (1<<15)
-#define S3C2412_CLKCON_UARTCLK (1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48 (1<<12)
-#define S3C2412_CLKCON_USB_DEV48 (1<<11)
-#define S3C2412_CLKCON_HCLKdiv2 (1<<10)
-#define S3C2412_CLKCON_HCLKx2 (1<<9)
-#define S3C2412_CLKCON_SDRAM (1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3 (1<<3)
-#define S3C2412_CLKCON_DMA2 (1<<2)
-#define S3C2412_CLKCON_DMA1 (1<<1)
-#define S3C2412_CLKCON_DMA0 (1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
deleted file mode 100644
index 1235df7..0000000
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
-
-#if defined(CONFIG_CPU_S3C2412)
-#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
-#endif
-
-#if defined(CONFIG_CPU_S3C244X)
-
-#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
-
-#define S3C2440_SELECT_DSC0 (0)
-#define S3C2440_SELECT_DSC1 (1<<31)
-
-#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
-
-#define S3C2440_DSC0_DISABLE (1<<31)
-
-#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8)
-#define S3C2440_DSC0_ADDR_12mA (0<<8)
-#define S3C2440_DSC0_ADDR_10mA (1<<8)
-#define S3C2440_DSC0_ADDR_8mA (2<<8)
-#define S3C2440_DSC0_ADDR_6mA (3<<8)
-#define S3C2440_DSC0_ADDR_MASK (3<<8)
-
-/* D24..D31 */
-#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6)
-#define S3C2440_DSC0_DATA3_12mA (0<<6)
-#define S3C2440_DSC0_DATA3_10mA (1<<6)
-#define S3C2440_DSC0_DATA3_8mA (2<<6)
-#define S3C2440_DSC0_DATA3_6mA (3<<6)
-#define S3C2440_DSC0_DATA3_MASK (3<<6)
-
-/* D16..D23 */
-#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4)
-#define S3C2440_DSC0_DATA2_12mA (0<<4)
-#define S3C2440_DSC0_DATA2_10mA (1<<4)
-#define S3C2440_DSC0_DATA2_8mA (2<<4)
-#define S3C2440_DSC0_DATA2_6mA (3<<4)
-#define S3C2440_DSC0_DATA2_MASK (3<<4)
-
-/* D8..D15 */
-#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2)
-#define S3C2440_DSC0_DATA1_12mA (0<<2)
-#define S3C2440_DSC0_DATA1_10mA (1<<2)
-#define S3C2440_DSC0_DATA1_8mA (2<<2)
-#define S3C2440_DSC0_DATA1_6mA (3<<2)
-#define S3C2440_DSC0_DATA1_MASK (3<<2)
-
-/* D0..D7 */
-#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0)
-#define S3C2440_DSC0_DATA0_12mA (0<<0)
-#define S3C2440_DSC0_DATA0_10mA (1<<0)
-#define S3C2440_DSC0_DATA0_8mA (2<<0)
-#define S3C2440_DSC0_DATA0_6mA (3<<0)
-#define S3C2440_DSC0_DATA0_MASK (3<<0)
-
-#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28)
-#define S3C2440_DSC1_SCK1_12mA (0<<28)
-#define S3C2440_DSC1_SCK1_10mA (1<<28)
-#define S3C2440_DSC1_SCK1_8mA (2<<28)
-#define S3C2440_DSC1_SCK1_6mA (3<<28)
-#define S3C2440_DSC1_SCK1_MASK (3<<28)
-
-#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26)
-#define S3C2440_DSC1_SCK0_12mA (0<<26)
-#define S3C2440_DSC1_SCK0_10mA (1<<26)
-#define S3C2440_DSC1_SCK0_8mA (2<<26)
-#define S3C2440_DSC1_SCK0_6mA (3<<26)
-#define S3C2440_DSC1_SCK0_MASK (3<<26)
-
-#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24)
-#define S3C2440_DSC1_SCKE_10mA (0<<24)
-#define S3C2440_DSC1_SCKE_8mA (1<<24)
-#define S3C2440_DSC1_SCKE_6mA (2<<24)
-#define S3C2440_DSC1_SCKE_4mA (3<<24)
-#define S3C2440_DSC1_SCKE_MASK (3<<24)
-
-/* SDRAM nRAS/nCAS */
-#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22)
-#define S3C2440_DSC1_SDR_10mA (0<<22)
-#define S3C2440_DSC1_SDR_8mA (1<<22)
-#define S3C2440_DSC1_SDR_6mA (2<<22)
-#define S3C2440_DSC1_SDR_4mA (3<<22)
-#define S3C2440_DSC1_SDR_MASK (3<<22)
-
-/* NAND Flash Controller */
-#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20)
-#define S3C2440_DSC1_NFC_10mA (0<<20)
-#define S3C2440_DSC1_NFC_8mA (1<<20)
-#define S3C2440_DSC1_NFC_6mA (2<<20)
-#define S3C2440_DSC1_NFC_4mA (3<<20)
-#define S3C2440_DSC1_NFC_MASK (3<<20)
-
-/* nBE[0..3] */
-#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18)
-#define S3C2440_DSC1_nBE_10mA (0<<18)
-#define S3C2440_DSC1_nBE_8mA (1<<18)
-#define S3C2440_DSC1_nBE_6mA (2<<18)
-#define S3C2440_DSC1_nBE_4mA (3<<18)
-#define S3C2440_DSC1_nBE_MASK (3<<18)
-
-#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16)
-#define S3C2440_DSC1_WOE_10mA (0<<16)
-#define S3C2440_DSC1_WOE_8mA (1<<16)
-#define S3C2440_DSC1_WOE_6mA (2<<16)
-#define S3C2440_DSC1_WOE_4mA (3<<16)
-#define S3C2440_DSC1_WOE_MASK (3<<16)
-
-#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14)
-#define S3C2440_DSC1_CS7_10mA (0<<14)
-#define S3C2440_DSC1_CS7_8mA (1<<14)
-#define S3C2440_DSC1_CS7_6mA (2<<14)
-#define S3C2440_DSC1_CS7_4mA (3<<14)
-#define S3C2440_DSC1_CS7_MASK (3<<14)
-
-#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12)
-#define S3C2440_DSC1_CS6_10mA (0<<12)
-#define S3C2440_DSC1_CS6_8mA (1<<12)
-#define S3C2440_DSC1_CS6_6mA (2<<12)
-#define S3C2440_DSC1_CS6_4mA (3<<12)
-#define S3C2440_DSC1_CS6_MASK (3<<12)
-
-#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10)
-#define S3C2440_DSC1_CS5_10mA (0<<10)
-#define S3C2440_DSC1_CS5_8mA (1<<10)
-#define S3C2440_DSC1_CS5_6mA (2<<10)
-#define S3C2440_DSC1_CS5_4mA (3<<10)
-#define S3C2440_DSC1_CS5_MASK (3<<10)
-
-#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8)
-#define S3C2440_DSC1_CS4_10mA (0<<8)
-#define S3C2440_DSC1_CS4_8mA (1<<8)
-#define S3C2440_DSC1_CS4_6mA (2<<8)
-#define S3C2440_DSC1_CS4_4mA (3<<8)
-#define S3C2440_DSC1_CS4_MASK (3<<8)
-
-#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6)
-#define S3C2440_DSC1_CS3_10mA (0<<6)
-#define S3C2440_DSC1_CS3_8mA (1<<6)
-#define S3C2440_DSC1_CS3_6mA (2<<6)
-#define S3C2440_DSC1_CS3_4mA (3<<6)
-#define S3C2440_DSC1_CS3_MASK (3<<6)
-
-#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4)
-#define S3C2440_DSC1_CS2_10mA (0<<4)
-#define S3C2440_DSC1_CS2_8mA (1<<4)
-#define S3C2440_DSC1_CS2_6mA (2<<4)
-#define S3C2440_DSC1_CS2_4mA (3<<4)
-#define S3C2440_DSC1_CS2_MASK (3<<4)
-
-#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2)
-#define S3C2440_DSC1_CS1_10mA (0<<2)
-#define S3C2440_DSC1_CS1_8mA (1<<2)
-#define S3C2440_DSC1_CS1_6mA (2<<2)
-#define S3C2440_DSC1_CS1_4mA (3<<2)
-#define S3C2440_DSC1_CS1_MASK (3<<2)
-
-#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0)
-#define S3C2440_DSC1_CS0_10mA (0<<0)
-#define S3C2440_DSC1_CS0_8mA (1<<0)
-#define S3C2440_DSC1_CS0_6mA (2<<0)
-#define S3C2440_DSC1_CS0_4mA (3<<0)
-#define S3C2440_DSC1_CS0_MASK (3<<0)
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#endif /* __ASM_ARCH_REGS_DSC_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
deleted file mode 100644
index 497dd06..0000000
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ /dev/null
@@ -1,1163 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 GPIO register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA (32*0)
-#define S3C2410_GPIO_BANKB (32*1)
-#define S3C2410_GPIO_BANKC (32*2)
-#define S3C2410_GPIO_BANKD (32*3)
-#define S3C2410_GPIO_BANKE (32*4)
-#define S3C2410_GPIO_BANKF (32*5)
-#define S3C2410_GPIO_BANKG (32*6)
-#define S3C2410_GPIO_BANKH (32*7)
-
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR S3C2400_MISCCR
-#else
-#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
-
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
- (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
- S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
- S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
-#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
-#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * S3C2400: 18bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
-
-#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT (0<<0)
-#define S3C2410_GPA0_ADDR0 (1<<0)
-
-#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT (0<<1)
-#define S3C2410_GPA1_ADDR16 (1<<1)
-
-#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT (0<<2)
-#define S3C2410_GPA2_ADDR17 (1<<2)
-
-#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT (0<<3)
-#define S3C2410_GPA3_ADDR18 (1<<3)
-
-#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT (0<<4)
-#define S3C2410_GPA4_ADDR19 (1<<4)
-
-#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT (0<<5)
-#define S3C2410_GPA5_ADDR20 (1<<5)
-
-#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT (0<<6)
-#define S3C2410_GPA6_ADDR21 (1<<6)
-
-#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT (0<<7)
-#define S3C2410_GPA7_ADDR22 (1<<7)
-
-#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT (0<<8)
-#define S3C2410_GPA8_ADDR23 (1<<8)
-
-#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT (0<<9)
-#define S3C2410_GPA9_ADDR24 (1<<9)
-
-#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT (0<<10)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE (1<<10)
-
-#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT (0<<11)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0 (1<<11)
-
-#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT (0<<12)
-#define S3C2410_GPA12_nGCS1 (1<<12)
-#define S3C2400_GPA12_nCAS1 (1<<12)
-
-#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT (0<<13)
-#define S3C2410_GPA13_nGCS2 (1<<13)
-#define S3C2400_GPA13_nGCS1 (1<<13)
-
-#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT (0<<14)
-#define S3C2410_GPA14_nGCS3 (1<<14)
-#define S3C2400_GPA14_nGCS2 (1<<14)
-
-#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT (0<<15)
-#define S3C2410_GPA15_nGCS4 (1<<15)
-#define S3C2400_GPA15_nGCS3 (1<<15)
-
-#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT (0<<16)
-#define S3C2410_GPA16_nGCS5 (1<<16)
-#define S3C2400_GPA16_nGCS4 (1<<16)
-
-#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT (0<<17)
-#define S3C2410_GPA17_CLE (1<<17)
-#define S3C2400_GPA17_nGCS5 (1<<17)
-
-#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT (0<<18)
-#define S3C2410_GPA18_ALE (1<<18)
-
-#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT (0<<19)
-#define S3C2410_GPA19_nFWE (1<<19)
-
-#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT (0<<20)
-#define S3C2410_GPA20_nFRE (1<<20)
-
-#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT (0<<21)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-
-#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT (0<<22)
-#define S3C2410_GPA22_nFCE (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- * 00 = input, 01 = output, 10=special function, 11=reserved
-
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- * 00 = input, 01 = output, 10=data, 11=special function
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
-
-#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP (0x00 << 0)
-#define S3C2410_GPB0_OUTP (0x01 << 0)
-#define S3C2410_GPB0_TOUT0 (0x02 << 0)
-#define S3C2400_GPB0_DATA16 (0x02 << 0)
-
-#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP (0x00 << 2)
-#define S3C2410_GPB1_OUTP (0x01 << 2)
-#define S3C2410_GPB1_TOUT1 (0x02 << 2)
-#define S3C2400_GPB1_DATA17 (0x02 << 2)
-
-#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP (0x00 << 4)
-#define S3C2410_GPB2_OUTP (0x01 << 4)
-#define S3C2410_GPB2_TOUT2 (0x02 << 4)
-#define S3C2400_GPB2_DATA18 (0x02 << 4)
-#define S3C2400_GPB2_TCLK1 (0x03 << 4)
-
-#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP (0x00 << 6)
-#define S3C2410_GPB3_OUTP (0x01 << 6)
-#define S3C2410_GPB3_TOUT3 (0x02 << 6)
-#define S3C2400_GPB3_DATA19 (0x02 << 6)
-#define S3C2400_GPB3_TXD1 (0x03 << 6)
-
-#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP (0x00 << 8)
-#define S3C2410_GPB4_OUTP (0x01 << 8)
-#define S3C2410_GPB4_TCLK0 (0x02 << 8)
-#define S3C2400_GPB4_DATA20 (0x02 << 8)
-#define S3C2410_GPB4_MASK (0x03 << 8)
-#define S3C2400_GPB4_RXD1 (0x03 << 8)
-#define S3C2400_GPB4_MASK (0x03 << 8)
-
-#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP (0x00 << 10)
-#define S3C2410_GPB5_OUTP (0x01 << 10)
-#define S3C2410_GPB5_nXBACK (0x02 << 10)
-#define S3C2443_GPB5_XBACK (0x03 << 10)
-#define S3C2400_GPB5_DATA21 (0x02 << 10)
-#define S3C2400_GPB5_nCTS1 (0x03 << 10)
-
-#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP (0x00 << 12)
-#define S3C2410_GPB6_OUTP (0x01 << 12)
-#define S3C2410_GPB6_nXBREQ (0x02 << 12)
-#define S3C2443_GPB6_XBREQ (0x03 << 12)
-#define S3C2400_GPB6_DATA22 (0x02 << 12)
-#define S3C2400_GPB6_nRTS1 (0x03 << 12)
-
-#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP (0x00 << 14)
-#define S3C2410_GPB7_OUTP (0x01 << 14)
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1 (0x03 << 14)
-#define S3C2400_GPB7_DATA23 (0x02 << 14)
-
-#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP (0x00 << 16)
-#define S3C2410_GPB8_OUTP (0x01 << 16)
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24 (0x02 << 16)
-
-#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP (0x00 << 18)
-#define S3C2410_GPB9_OUTP (0x01 << 18)
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0 (0x03 << 18)
-#define S3C2400_GPB9_DATA25 (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI (0x03 << 18)
-
-#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP (0x00 << 20)
-#define S3C2410_GPB10_OUTP (0x01 << 20)
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS (0x03 << 20)
-
-#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
-#define S3C2400_GPB11_INP (0x00 << 22)
-#define S3C2400_GPB11_OUTP (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
-#define S3C2400_GPB12_INP (0x00 << 24)
-#define S3C2400_GPB12_OUTP (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
-#define S3C2400_GPB13_INP (0x00 << 26)
-#define S3C2400_GPB13_OUTP (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
-#define S3C2400_GPB14_INP (0x00 << 28)
-#define S3C2400_GPB14_OUTP (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
-#define S3C2400_GPB15_INP (0x00 << 30)
-#define S3C2400_GPB15_OUTP (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
-
-#define S3C2410_GPB_PUPDIS(x) (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
-
-#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP (0x00 << 0)
-#define S3C2410_GPC0_OUTP (0x01 << 0)
-#define S3C2410_GPC0_LEND (0x02 << 0)
-#define S3C2400_GPC0_VD0 (0x02 << 0)
-
-#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP (0x00 << 2)
-#define S3C2410_GPC1_OUTP (0x01 << 2)
-#define S3C2410_GPC1_VCLK (0x02 << 2)
-#define S3C2400_GPC1_VD1 (0x02 << 2)
-
-#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP (0x00 << 4)
-#define S3C2410_GPC2_OUTP (0x01 << 4)
-#define S3C2410_GPC2_VLINE (0x02 << 4)
-#define S3C2400_GPC2_VD2 (0x02 << 4)
-
-#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP (0x00 << 6)
-#define S3C2410_GPC3_OUTP (0x01 << 6)
-#define S3C2410_GPC3_VFRAME (0x02 << 6)
-#define S3C2400_GPC3_VD3 (0x02 << 6)
-
-#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP (0x00 << 8)
-#define S3C2410_GPC4_OUTP (0x01 << 8)
-#define S3C2410_GPC4_VM (0x02 << 8)
-#define S3C2400_GPC4_VD4 (0x02 << 8)
-
-#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP (0x00 << 10)
-#define S3C2410_GPC5_OUTP (0x01 << 10)
-#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
-#define S3C2400_GPC5_VD5 (0x02 << 10)
-
-#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP (0x00 << 12)
-#define S3C2410_GPC6_OUTP (0x01 << 12)
-#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
-#define S3C2400_GPC6_VD6 (0x02 << 12)
-
-#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP (0x00 << 14)
-#define S3C2410_GPC7_OUTP (0x01 << 14)
-#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
-#define S3C2400_GPC7_VD7 (0x02 << 14)
-
-#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP (0x00 << 16)
-#define S3C2410_GPC8_OUTP (0x01 << 16)
-#define S3C2410_GPC8_VD0 (0x02 << 16)
-#define S3C2400_GPC8_VD8 (0x02 << 16)
-
-#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP (0x00 << 18)
-#define S3C2410_GPC9_OUTP (0x01 << 18)
-#define S3C2410_GPC9_VD1 (0x02 << 18)
-#define S3C2400_GPC9_VD9 (0x02 << 18)
-
-#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP (0x00 << 20)
-#define S3C2410_GPC10_OUTP (0x01 << 20)
-#define S3C2410_GPC10_VD2 (0x02 << 20)
-#define S3C2400_GPC10_VD10 (0x02 << 20)
-
-#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP (0x00 << 22)
-#define S3C2410_GPC11_OUTP (0x01 << 22)
-#define S3C2410_GPC11_VD3 (0x02 << 22)
-#define S3C2400_GPC11_VD11 (0x02 << 22)
-
-#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP (0x00 << 24)
-#define S3C2410_GPC12_OUTP (0x01 << 24)
-#define S3C2410_GPC12_VD4 (0x02 << 24)
-#define S3C2400_GPC12_VD12 (0x02 << 24)
-
-#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP (0x00 << 26)
-#define S3C2410_GPC13_OUTP (0x01 << 26)
-#define S3C2410_GPC13_VD5 (0x02 << 26)
-#define S3C2400_GPC13_VD13 (0x02 << 26)
-
-#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP (0x00 << 28)
-#define S3C2410_GPC14_OUTP (0x01 << 28)
-#define S3C2410_GPC14_VD6 (0x02 << 28)
-#define S3C2400_GPC14_VD14 (0x02 << 28)
-
-#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP (0x00 << 30)
-#define S3C2410_GPC15_OUTP (0x01 << 30)
-#define S3C2410_GPC15_VD7 (0x02 << 30)
-#define S3C2400_GPC15_VD15 (0x02 << 30)
-
-#define S3C2410_GPC_PUPDIS(x) (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
-
-#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
-
-#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP (0x00 << 0)
-#define S3C2410_GPD0_OUTP (0x01 << 0)
-#define S3C2410_GPD0_VD8 (0x02 << 0)
-#define S3C2400_GPD0_VFRAME (0x02 << 0)
-#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
-
-#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP (0x00 << 2)
-#define S3C2410_GPD1_OUTP (0x01 << 2)
-#define S3C2410_GPD1_VD9 (0x02 << 2)
-#define S3C2400_GPD1_VM (0x02 << 2)
-#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
-
-#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP (0x00 << 4)
-#define S3C2410_GPD2_OUTP (0x01 << 4)
-#define S3C2410_GPD2_VD10 (0x02 << 4)
-#define S3C2400_GPD2_VLINE (0x02 << 4)
-
-#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP (0x00 << 6)
-#define S3C2410_GPD3_OUTP (0x01 << 6)
-#define S3C2410_GPD3_VD11 (0x02 << 6)
-#define S3C2400_GPD3_VCLK (0x02 << 6)
-
-#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP (0x00 << 8)
-#define S3C2410_GPD4_OUTP (0x01 << 8)
-#define S3C2410_GPD4_VD12 (0x02 << 8)
-#define S3C2400_GPD4_LEND (0x02 << 8)
-
-#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP (0x00 << 10)
-#define S3C2410_GPD5_OUTP (0x01 << 10)
-#define S3C2410_GPD5_VD13 (0x02 << 10)
-#define S3C2400_GPD5_TOUT0 (0x02 << 10)
-
-#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP (0x00 << 12)
-#define S3C2410_GPD6_OUTP (0x01 << 12)
-#define S3C2410_GPD6_VD14 (0x02 << 12)
-#define S3C2400_GPD6_TOUT1 (0x02 << 12)
-
-#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP (0x00 << 14)
-#define S3C2410_GPD7_OUTP (0x01 << 14)
-#define S3C2410_GPD7_VD15 (0x02 << 14)
-#define S3C2400_GPD7_TOUT2 (0x02 << 14)
-
-#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP (0x00 << 16)
-#define S3C2410_GPD8_OUTP (0x01 << 16)
-#define S3C2410_GPD8_VD16 (0x02 << 16)
-#define S3C2400_GPD8_TOUT3 (0x02 << 16)
-
-#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP (0x00 << 18)
-#define S3C2410_GPD9_OUTP (0x01 << 18)
-#define S3C2410_GPD9_VD17 (0x02 << 18)
-#define S3C2400_GPD9_TCLK0 (0x02 << 18)
-#define S3C2410_GPD9_MASK (0x03 << 18)
-
-#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP (0x00 << 20)
-#define S3C2410_GPD10_OUTP (0x01 << 20)
-#define S3C2410_GPD10_VD18 (0x02 << 20)
-#define S3C2400_GPD10_nWAIT (0x02 << 20)
-
-#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP (0x00 << 22)
-#define S3C2410_GPD11_OUTP (0x01 << 22)
-#define S3C2410_GPD11_VD19 (0x02 << 22)
-
-#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP (0x00 << 24)
-#define S3C2410_GPD12_OUTP (0x01 << 24)
-#define S3C2410_GPD12_VD20 (0x02 << 24)
-
-#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP (0x00 << 26)
-#define S3C2410_GPD13_OUTP (0x01 << 26)
-#define S3C2410_GPD13_VD21 (0x02 << 26)
-
-#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP (0x00 << 28)
-#define S3C2410_GPD14_OUTP (0x01 << 28)
-#define S3C2410_GPD14_VD22 (0x02 << 28)
-#define S3C2410_GPD14_nSS1 (0x03 << 28)
-
-#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP (0x00 << 30)
-#define S3C2410_GPD15_OUTP (0x01 << 30)
-#define S3C2410_GPD15_VD23 (0x02 << 30)
-#define S3C2410_GPD15_nSS0 (0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
-
-#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
-
-#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP (0x00 << 0)
-#define S3C2410_GPE0_OUTP (0x01 << 0)
-#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0 (0x02 << 0)
-#define S3C2410_GPE0_MASK (0x03 << 0)
-
-#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP (0x00 << 2)
-#define S3C2410_GPE1_OUTP (0x01 << 2)
-#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
-#define S3C2400_GPE1_EINT1 (0x02 << 2)
-#define S3C2400_GPE1_nSS (0x03 << 2)
-#define S3C2410_GPE1_MASK (0x03 << 2)
-
-#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP (0x00 << 4)
-#define S3C2410_GPE2_OUTP (0x01 << 4)
-#define S3C2410_GPE2_CDCLK (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2 (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI (0x03 << 4)
-
-#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP (0x00 << 6)
-#define S3C2410_GPE3_OUTP (0x01 << 6)
-#define S3C2410_GPE3_I2SSDI (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI (0x03 << 6)
-#define S3C2400_GPE3_EINT3 (0x02 << 6)
-#define S3C2400_GPE3_nCTS1 (0x03 << 6)
-#define S3C2410_GPE3_nSS0 (0x03 << 6)
-#define S3C2410_GPE3_MASK (0x03 << 6)
-
-#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP (0x00 << 8)
-#define S3C2410_GPE4_OUTP (0x01 << 8)
-#define S3C2410_GPE4_I2SSDO (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO (0x03 << 8)
-#define S3C2400_GPE4_EINT4 (0x02 << 8)
-#define S3C2400_GPE4_nRTS1 (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI (0x03 << 8)
-#define S3C2410_GPE4_MASK (0x03 << 8)
-
-#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP (0x00 << 10)
-#define S3C2410_GPE5_OUTP (0x01 << 10)
-#define S3C2410_GPE5_SDCLK (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
-#define S3C2400_GPE5_EINT5 (0x02 << 10)
-#define S3C2400_GPE5_TCLK1 (0x03 << 10)
-
-#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP (0x00 << 12)
-#define S3C2410_GPE6_OUTP (0x01 << 12)
-#define S3C2410_GPE6_SDCMD (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
-#define S3C2400_GPE6_EINT6 (0x02 << 12)
-
-#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP (0x00 << 14)
-#define S3C2410_GPE7_OUTP (0x01 << 14)
-#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI (0x03 << 14)
-#define S3C2400_GPE7_EINT7 (0x02 << 14)
-
-#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP (0x00 << 16)
-#define S3C2410_GPE8_OUTP (0x01 << 16)
-#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
-
-#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP (0x00 << 18)
-#define S3C2410_GPE9_OUTP (0x01 << 18)
-#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
-#define S3C2400_GPE9_nXBACK (0x03 << 18)
-
-#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP (0x00 << 20)
-#define S3C2410_GPE10_OUTP (0x01 << 20)
-#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
-#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
-
-#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP (0x00 << 22)
-#define S3C2410_GPE11_OUTP (0x01 << 22)
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ (0x03 << 22)
-
-#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP (0x00 << 24)
-#define S3C2410_GPE12_OUTP (0x01 << 24)
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP (0x00 << 26)
-#define S3C2410_GPE13_OUTP (0x01 << 26)
-#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
-
-#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP (0x00 << 28)
-#define S3C2410_GPE14_OUTP (0x01 << 28)
-#define S3C2410_GPE14_IICSCL (0x02 << 28)
-#define S3C2410_GPE14_MASK (0x03 << 28)
-
-#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP (0x00 << 30)
-#define S3C2410_GPE15_OUTP (0x01 << 30)
-#define S3C2410_GPE15_IICSDA (0x02 << 30)
-#define S3C2410_GPE15_MASK (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
-#define S3C2440_GPE2_ACRESET (0x03 << 4)
-#define S3C2440_GPE3_ACIN (0x03 << 6)
-#define S3C2440_GPE4_ACOUT (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
-
-#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
-
-#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP (0x00 << 0)
-#define S3C2410_GPF0_OUTP (0x01 << 0)
-#define S3C2410_GPF0_EINT0 (0x02 << 0)
-#define S3C2400_GPF0_RXD0 (0x02 << 0)
-
-#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP (0x00 << 2)
-#define S3C2410_GPF1_OUTP (0x01 << 2)
-#define S3C2410_GPF1_EINT1 (0x02 << 2)
-#define S3C2400_GPF1_RXD1 (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
-#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP (0x00 << 4)
-#define S3C2410_GPF2_OUTP (0x01 << 4)
-#define S3C2410_GPF2_EINT2 (0x02 << 4)
-#define S3C2400_GPF2_TXD0 (0x02 << 4)
-
-#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP (0x00 << 6)
-#define S3C2410_GPF3_OUTP (0x01 << 6)
-#define S3C2410_GPF3_EINT3 (0x02 << 6)
-#define S3C2400_GPF3_TXD1 (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
-#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP (0x00 << 8)
-#define S3C2410_GPF4_OUTP (0x01 << 8)
-#define S3C2410_GPF4_EINT4 (0x02 << 8)
-#define S3C2400_GPF4_nRTS0 (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
-#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP (0x00 << 10)
-#define S3C2410_GPF5_OUTP (0x01 << 10)
-#define S3C2410_GPF5_EINT5 (0x02 << 10)
-#define S3C2400_GPF5_nCTS0 (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
-#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP (0x00 << 12)
-#define S3C2410_GPF6_OUTP (0x01 << 12)
-#define S3C2410_GPF6_EINT6 (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
-#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP (0x00 << 14)
-#define S3C2410_GPF7_OUTP (0x01 << 14)
-#define S3C2410_GPF7_EINT7 (0x02 << 14)
-
-#define S3C2410_GPF_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
-*/
-
-#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
-
-#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
-
-#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP (0x00 << 0)
-#define S3C2410_GPG0_OUTP (0x01 << 0)
-#define S3C2410_GPG0_EINT8 (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
-
-#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP (0x00 << 2)
-#define S3C2410_GPG1_OUTP (0x01 << 2)
-#define S3C2410_GPG1_EINT9 (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
-
-#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP (0x00 << 4)
-#define S3C2410_GPG2_OUTP (0x01 << 4)
-#define S3C2410_GPG2_EINT10 (0x02 << 4)
-#define S3C2410_GPG2_nSS0 (0x03 << 4)
-#define S3C2400_GPG2_CDCLK (0x02 << 4)
-
-#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP (0x00 << 6)
-#define S3C2410_GPG3_OUTP (0x01 << 6)
-#define S3C2410_GPG3_EINT11 (0x02 << 6)
-#define S3C2410_GPG3_nSS1 (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI (0x03 << 6)
-
-#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP (0x00 << 8)
-#define S3C2410_GPG4_OUTP (0x01 << 8)
-#define S3C2410_GPG4_EINT12 (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI (0x03 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP (0x00 << 10)
-#define S3C2410_GPG5_OUTP (0x01 << 10)
-#define S3C2410_GPG5_EINT13 (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD (0x02 << 10)
-#define S3C2400_GPG5_IICSDA (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
-
-#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP (0x00 << 12)
-#define S3C2410_GPG6_OUTP (0x01 << 12)
-#define S3C2410_GPG6_EINT14 (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT (0x02 << 12)
-#define S3C2400_GPG6_IICSCL (0x03 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP (0x00 << 14)
-#define S3C2410_GPG7_OUTP (0x01 << 14)
-#define S3C2410_GPG7_EINT15 (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO (0x02 << 14)
-#define S3C2400_GPG7_IICSDA (0x03 << 14)
-
-#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP (0x00 << 16)
-#define S3C2410_GPG8_OUTP (0x01 << 16)
-#define S3C2410_GPG8_EINT16 (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
-#define S3C2400_GPG8_IICSCL (0x03 << 16)
-
-#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP (0x00 << 18)
-#define S3C2410_GPG9_OUTP (0x01 << 18)
-#define S3C2410_GPG9_EINT17 (0x02 << 18)
-#define S3C2400_GPG9_SPICLK (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK (0x03 << 18)
-
-#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP (0x00 << 20)
-#define S3C2410_GPG10_OUTP (0x01 << 20)
-#define S3C2410_GPG10_EINT18 (0x02 << 20)
-
-#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP (0x00 << 22)
-#define S3C2410_GPG11_OUTP (0x01 << 22)
-#define S3C2410_GPG11_EINT19 (0x02 << 22)
-#define S3C2410_GPG11_TCLK1 (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP (0x00 << 24)
-#define S3C2410_GPG12_OUTP (0x01 << 24)
-#define S3C2410_GPG12_EINT20 (0x02 << 24)
-#define S3C2410_GPG12_XMON (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP (0x00 << 26)
-#define S3C2410_GPG13_OUTP (0x01 << 26)
-#define S3C2410_GPG13_EINT21 (0x02 << 26)
-#define S3C2410_GPG13_nXPON (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP (0x00 << 28)
-#define S3C2410_GPG14_OUTP (0x01 << 28)
-#define S3C2410_GPG14_EINT22 (0x02 << 28)
-#define S3C2410_GPG14_YMON (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP (0x00 << 30)
-#define S3C2410_GPG15_OUTP (0x01 << 30)
-#define S3C2410_GPG15_EINT23 (0x02 << 30)
-#define S3C2410_GPG15_nYPON (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x) (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPGCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP (0x00 << 0)
-#define S3C2410_GPH0_OUTP (0x01 << 0)
-#define S3C2410_GPH0_nCTS0 (0x02 << 0)
-
-#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP (0x00 << 2)
-#define S3C2410_GPH1_OUTP (0x01 << 2)
-#define S3C2410_GPH1_nRTS0 (0x02 << 2)
-
-#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP (0x00 << 4)
-#define S3C2410_GPH2_OUTP (0x01 << 4)
-#define S3C2410_GPH2_TXD0 (0x02 << 4)
-
-#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP (0x00 << 6)
-#define S3C2410_GPH3_OUTP (0x01 << 6)
-#define S3C2410_GPH3_RXD0 (0x02 << 6)
-
-#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP (0x00 << 8)
-#define S3C2410_GPH4_OUTP (0x01 << 8)
-#define S3C2410_GPH4_TXD1 (0x02 << 8)
-
-#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP (0x00 << 10)
-#define S3C2410_GPH5_OUTP (0x01 << 10)
-#define S3C2410_GPH5_RXD1 (0x02 << 10)
-
-#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP (0x00 << 12)
-#define S3C2410_GPH6_OUTP (0x01 << 12)
-#define S3C2410_GPH6_TXD2 (0x02 << 12)
-#define S3C2410_GPH6_nRTS1 (0x03 << 12)
-
-#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP (0x00 << 14)
-#define S3C2410_GPH7_OUTP (0x01 << 14)
-#define S3C2410_GPH7_RXD2 (0x02 << 14)
-#define S3C2410_GPH7_nCTS1 (0x03 << 14)
-
-#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP (0x00 << 16)
-#define S3C2410_GPH8_OUTP (0x01 << 16)
-#define S3C2410_GPH8_UCLK (0x02 << 16)
-
-#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP (0x00 << 18)
-#define S3C2410_GPH9_OUTP (0x01 << 18)
-#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
-
-#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP (0x00 << 20)
-#define S3C2410_GPH10_OUTP (0x01 << 20)
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/* miscellaneous control */
-#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
-#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
-
-#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
-
-#define S3C2410_MISCCR_USBDEV (0<<3)
-#define S3C2410_MISCCR_USBHOST (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP (7<<17)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
-#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
-
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV (0x00)
-#define S3C2410_EXTINT_HILEV (0x01)
-#define S3C2410_EXTINT_FALLEDGE (0x02)
-#define S3C2410_EXTINT_RISEEDGE (0x04)
-#define S3C2410_EXTINT_BOTHEDGE (0x06)
-
-/* interrupt filtering conrrol for EINT16..EINT23 */
-#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK (0x00)
-#define S3C2410_EINTFLT_EXTCLK (1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT (1<<3)
-#define S3C2410_GSTATUS0_NCON (1<<2)
-#define S3C2410_GSTATUS0_RnB (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
-#define S3C2410_GSTATUS1_2410 (0x32410000)
-#define S3C2410_GSTATUS1_2412 (0x32412001)
-#define S3C2410_GSTATUS1_2440 (0x32440000)
-#define S3C2410_GSTATUS1_2442 (0x32440aaa)
-
-#define S3C2410_GSTATUS2_WTRESET (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET (1<<1)
-#define S3C2410_GSTATUS2_PONRESET (1<<0)
-
-/* open drain control register */
-#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW (0x0)
-#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL (0x33333333)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
deleted file mode 100644
index 0362332..0000000
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2440_GPIO_BANKJ (416)
-
-#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
-
-#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
-#define S3C2440_GPJ0_INP (0x00 << 0)
-#define S3C2440_GPJ0_OUTP (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
-
-#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
-#define S3C2440_GPJ1_INP (0x00 << 2)
-#define S3C2440_GPJ1_OUTP (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
-
-#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
-#define S3C2440_GPJ2_INP (0x00 << 4)
-#define S3C2440_GPJ2_OUTP (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
-
-#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
-#define S3C2440_GPJ3_INP (0x00 << 6)
-#define S3C2440_GPJ3_OUTP (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
-
-#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
-#define S3C2440_GPJ4_INP (0x00 << 8)
-#define S3C2440_GPJ4_OUTP (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
-
-#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
-#define S3C2440_GPJ5_INP (0x00 << 10)
-#define S3C2440_GPJ5_OUTP (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
-
-#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
-#define S3C2440_GPJ6_INP (0x00 << 12)
-#define S3C2440_GPJ6_OUTP (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
-
-#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
-#define S3C2440_GPJ7_INP (0x00 << 14)
-#define S3C2440_GPJ7_OUTP (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
-
-#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
-#define S3C2440_GPJ8_INP (0x00 << 16)
-#define S3C2440_GPJ8_OUTP (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
-
-#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
-#define S3C2440_GPJ9_INP (0x00 << 18)
-#define S3C2440_GPJ9_OUTP (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
-
-#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
-#define S3C2440_GPJ10_INP (0x00 << 20)
-#define S3C2440_GPJ10_OUTP (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
-
-#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
-#define S3C2440_GPJ11_INP (0x00 << 22)
-#define S3C2440_GPJ11_OUTP (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
-#define S3C2440_GPJ12_INP (0x00 << 24)
-#define S3C2440_GPJ12_OUTP (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
-
-#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
-#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
-#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
-
-#endif /* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
deleted file mode 100644
index 498184c..0000000
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
deleted file mode 100644
index bd85484..0000000
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
-
-#define S3C2410_LCDREG(x) (x)
-
-/* LCD control registers */
-#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00)
-#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04)
-#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08)
-#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C)
-#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10)
-
-#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
-#define S3C2410_LCDCON1_MMODE (1<<7)
-#define S3C2410_LCDCON1_DSCAN4 (0<<5)
-#define S3C2410_LCDCON1_STN4 (1<<5)
-#define S3C2410_LCDCON1_STN8 (2<<5)
-#define S3C2410_LCDCON1_TFT (3<<5)
-
-#define S3C2410_LCDCON1_STN1BPP (0<<1)
-#define S3C2410_LCDCON1_STN2GREY (1<<1)
-#define S3C2410_LCDCON1_STN4GREY (2<<1)
-#define S3C2410_LCDCON1_STN8BPP (3<<1)
-#define S3C2410_LCDCON1_STN12BPP (4<<1)
-
-#define S3C2410_LCDCON1_TFT1BPP (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP (13<<1)
-
-#define S3C2410_LCDCON1_ENVID (1)
-
-#define S3C2410_LCDCON1_MODEMASK 0x1E
-
-#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
-#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
-#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
-#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
-
-#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
-#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF)
-#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F)
-
-#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
-#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
-#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
-#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
-#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
-
-#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
-#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF)
-
-/* LDCCON4 changes for STN mode on the S3C2412 */
-
-#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
-#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
-#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
-
-#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
-
-#define S3C2410_LCDCON5_BPP24BL (1<<12)
-#define S3C2410_LCDCON5_FRM565 (1<<11)
-#define S3C2410_LCDCON5_INVVCLK (1<<10)
-#define S3C2410_LCDCON5_INVVLINE (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME (1<<8)
-#define S3C2410_LCDCON5_INVVD (1<<7)
-#define S3C2410_LCDCON5_INVVDEN (1<<6)
-#define S3C2410_LCDCON5_INVPWREN (1<<5)
-#define S3C2410_LCDCON5_INVLEND (1<<4)
-#define S3C2410_LCDCON5_PWREN (1<<3)
-#define S3C2410_LCDCON5_ENLEND (1<<2)
-#define S3C2410_LCDCON5_BSWP (1<<1)
-#define S3C2410_LCDCON5_HWSWP (1<<0)
-
-/* framebuffer start addressed */
-#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
-#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
-#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C)
-
-#define S3C2410_LCDBANK(x) ((x) << 21)
-#define S3C2410_LCDBASEU(x) (x)
-
-#define S3C2410_OFFSIZE(x) ((x) << 11)
-#define S3C2410_PAGEWIDTH(x) (x)
-
-/* colour lookup and miscellaneous controls */
-
-#define S3C2410_REDLUT S3C2410_LCDREG(0x20)
-#define S3C2410_GREENLUT S3C2410_LCDREG(0x24)
-#define S3C2410_BLUELUT S3C2410_LCDREG(0x28)
-
-#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C)
-#define S3C2410_TPAL S3C2410_LCDREG(0x50)
-
-#define S3C2410_TPAL_EN (1<<24)
-
-/* interrupt info */
-#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54)
-#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58)
-#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C)
-#define S3C2410_LCDINT_FIWSEL (1<<2)
-#define S3C2410_LCDINT_FRSYNC (1<<1)
-#define S3C2410_LCDINT_FICNT (1<<0)
-
-/* s3c2442 extra stn registers */
-
-#define S3C2442_REDLUT S3C2410_LCDREG(0x20)
-#define S3C2442_GREENLUT S3C2410_LCDREG(0x24)
-#define S3C2442_BLUELUT S3C2410_LCDREG(0x28)
-#define S3C2442_DITHMODE S3C2410_LCDREG(0x20)
-
-#define S3C2410_LPCSEL S3C2410_LCDREG(0x60)
-
-#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4))
-
-/* S3C2412 registers */
-
-#define S3C2412_TPAL S3C2410_LCDREG(0x20)
-
-#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24)
-#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28)
-#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C)
-
-#define S3C2412_TCONSEL S3C2410_LCDREG(0x30)
-
-#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34)
-#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38)
-#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C)
-#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40)
-
-#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4))
-#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4))
-#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4))
-
-#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4))
-
-/* general registers */
-
-/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
- * are available. */
-
-#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54)
-#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24)
-
-#define S3C24XX_LCDINTPND (0x00)
-#define S3C24XX_LCDSRCPND (0x04)
-#define S3C24XX_LCDINTMSK (0x08)
-
-#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
deleted file mode 100644
index 312ff93..0000000
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16 (1<<1)
-#define S3C2410_BWSCON_DW0_32 (2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8 (0<<4)
-#define S3C2410_BWSCON_DW1_16 (1<<4)
-#define S3C2410_BWSCON_DW1_32 (2<<4)
-#define S3C2410_BWSCON_WS1 (1<<6)
-#define S3C2410_BWSCON_ST1 (1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8 (0<<8)
-#define S3C2410_BWSCON_DW2_16 (1<<8)
-#define S3C2410_BWSCON_DW2_32 (2<<8)
-#define S3C2410_BWSCON_WS2 (1<<10)
-#define S3C2410_BWSCON_ST2 (1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8 (0<<12)
-#define S3C2410_BWSCON_DW3_16 (1<<12)
-#define S3C2410_BWSCON_DW3_32 (2<<12)
-#define S3C2410_BWSCON_WS3 (1<<14)
-#define S3C2410_BWSCON_ST3 (1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8 (0<<16)
-#define S3C2410_BWSCON_DW4_16 (1<<16)
-#define S3C2410_BWSCON_DW4_32 (2<<16)
-#define S3C2410_BWSCON_WS4 (1<<18)
-#define S3C2410_BWSCON_ST4 (1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8 (0<<20)
-#define S3C2410_BWSCON_DW5_16 (1<<20)
-#define S3C2410_BWSCON_DW5_32 (2<<20)
-#define S3C2410_BWSCON_WS5 (1<<22)
-#define S3C2410_BWSCON_ST5 (1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8 (0<<24)
-#define S3C2410_BWSCON_DW6_16 (1<<24)
-#define S3C2410_BWSCON_DW6_32 (2<<24)
-#define S3C2410_BWSCON_WS6 (1<<26)
-#define S3C2410_BWSCON_ST6 (1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8 (0<<28)
-#define S3C2410_BWSCON_DW7_16 (1<<28)
-#define S3C2410_BWSCON_DW7_32 (2<<28)
-#define S3C2410_BWSCON_WS7 (1<<30)
-#define S3C2410_BWSCON_ST7 (1<<31)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm (0x00)
-#define S3C2410_BANKCON_PMC4 (0x01)
-#define S3C2410_BANKCON_PMC8 (0x02)
-#define S3C2410_BANKCON_PMC16 (0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
-#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
-#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
-#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT (2)
-
-#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
-#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
-#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
-#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT (4)
-
-#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT (6)
-
-#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
-#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
-#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
-#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
-#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
-#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
-#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
-#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT (8)
-
-#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
-#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
-#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
-#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT (11)
-
-#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
-#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
-#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
-#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT (13)
-
-#define S3C2410_BANKCON_SRAM (0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
-#define S3C2410_BANKCON_SDRAM (0x3 << 15)
-
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
-#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
-#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
-#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
-#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
-
-#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN (1<<23)
-#define S3C2410_REFRESH_SELF (1<<22)
-#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK (3<<20)
-#define S3C2410_REFRESH_TRP_2clk (0<<20)
-#define S3C2410_REFRESH_TRP_3clk (1<<20)
-#define S3C2410_REFRESH_TRP_4clk (2<<20)
-
-#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK (3<<18)
-#define S3C2410_REFRESH_TSRC_4clk (0<<18)
-#define S3C2410_REFRESH_TSRC_5clk (1<<18)
-#define S3C2410_REFRESH_TSRC_6clk (2<<18)
-#define S3C2410_REFRESH_TSRC_7clk (3<<18)
-
-
-/* mode select register(s) */
-
-#define S3C2410_MRSRB_CL1 (0x00 << 4)
-#define S3C2410_MRSRB_CL2 (0x02 << 4)
-#define S3C2410_MRSRB_CL3 (0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M (0x2 << 0)
-#define S3C2410_BANKSIZE_64M (0x1 << 0)
-#define S3C2410_BANKSIZE_32M (0x0 << 0)
-#define S3C2410_BANKSIZE_16M (0x7 << 0)
-#define S3C2410_BANKSIZE_8M (0x6 << 0)
-#define S3C2410_BANKSIZE_4M (0x5 << 0)
-#define S3C2410_BANKSIZE_2M (0x4 << 0)
-#define S3C2410_BANKSIZE_MASK (0x7 << 0)
-#define S3C2400_BANKSIZE_MASK (0x4 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
-#define S3C2410_BANKSIZE_BURST (1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
deleted file mode 100644
index 13d13b7..0000000
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-power.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
-#define S3C2412_PWRCFG_BATF_MASK (3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8)
-#define S3C2412_PWRCFG_NAND_NORST (1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
deleted file mode 100644
index c8c793e..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#ifndef S3C2412_MEMREG
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
-
-#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
deleted file mode 100644
index 783b18f..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET (0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif /* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
deleted file mode 100644
index c141465..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2443 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT 16
-#define S3C2443_PLLCON_PDIVSHIFT 8
-#define S3C2443_PLLCON_SDIVSHIFT 0
-#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK (3)
-
-#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
-
-#define S3C2443_SWRST_RESET (0x533c2443)
-
-#define S3C2443_PLLCON_OFF (1<<24)
-
-#define S3C2443_CLKSRC_I2S_EXT (1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
-#define S3C2443_CLKSRC_I2S_MASK (3<<14)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
-
-#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
-#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
-
-#define S3C2443_CLKDIV0_DVS (1<<13)
-#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
-
-#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
-#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
-
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0 (1<<0)
-#define S3C2443_HCLKCON_DMA1 (1<<1)
-#define S3C2443_HCLKCON_DMA2 (1<<2)
-#define S3C2443_HCLKCON_DMA3 (1<<3)
-#define S3C2443_HCLKCON_DMA4 (1<<4)
-#define S3C2443_HCLKCON_DMA5 (1<<5)
-#define S3C2443_HCLKCON_CAMIF (1<<8)
-#define S3C2443_HCLKCON_DISP (1<<9)
-#define S3C2443_HCLKCON_LCDC (1<<10)
-#define S3C2443_HCLKCON_USBH (1<<11)
-#define S3C2443_HCLKCON_USBD (1<<12)
-#define S3C2443_HCLKCON_HSMMC (1<<16)
-#define S3C2443_HCLKCON_CFC (1<<17)
-#define S3C2443_HCLKCON_SSMC (1<<18)
-#define S3C2443_HCLKCON_DRAMC (1<<19)
-
-#define S3C2443_PCLKCON_UART0 (1<<0)
-#define S3C2443_PCLKCON_UART1 (1<<1)
-#define S3C2443_PCLKCON_UART2 (1<<2)
-#define S3C2443_PCLKCON_UART3 (1<<3)
-#define S3C2443_PCLKCON_IIC (1<<4)
-#define S3C2443_PCLKCON_SDI (1<<5)
-#define S3C2443_PCLKCON_ADC (1<<7)
-#define S3C2443_PCLKCON_AC97 (1<<8)
-#define S3C2443_PCLKCON_IIS (1<<9)
-#define S3C2443_PCLKCON_PWMT (1<<10)
-#define S3C2443_PCLKCON_WDT (1<<11)
-#define S3C2443_PCLKCON_RTC (1<<12)
-#define S3C2443_PCLKCON_GPIO (1<<13)
-#define S3C2443_PCLKCON_SPI0 (1<<14)
-#define S3C2443_PCLKCON_SPI1 (1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK (1<<16)
-#define S3C2443_SCLKCON_SSMCCLK (1<<15)
-#define S3C2443_SCLKCON_HSSPICLK (1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
-#define S3C2443_SCLKCON_CAMCLK (1<<11)
-#define S3C2443_SCLKCON_DISPCLK (1<<10)
-#define S3C2443_SCLKCON_I2SCLK (1<<9)
-#define S3C2443_SCLKCON_UARTCLK (1<<8)
-#define S3C2443_SCLKCON_USBHOST (1<<1)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2443_PLLCON_MDIVMASK;
- pdiv &= S3C2443_PLLCON_PDIVMASK;
- sdiv &= S3C2443_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
- do_div(fvco, pdiv << sdiv);
-
- return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2443_PLLCON_MDIVMASK;
- pdiv &= S3C2443_PLLCON_PDIVMASK;
- sdiv &= S3C2443_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
deleted file mode 100644
index bfb222f..0000000
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
deleted file mode 100644
index 4f866cd..0000000
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
deleted file mode 100644
index 7380373..0000000
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPIGPIO_H
-#define __ASM_ARCH_SPIGPIO_H __FILE__
-
-struct s3c2410_spigpio_info {
- unsigned long pin_clk;
- unsigned long pin_mosi;
- unsigned long pin_miso;
-
- int bus_num;
-
- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
-};
-
-
-#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
deleted file mode 100644
index 4421698..0000000
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H __FILE__
-
-struct s3c2410_spi_info {
- unsigned long pin_cs; /* simple gpio cs */
- unsigned int num_cs; /* total chipselects */
- int bus_num; /* bus number to use. */
-
- void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
-};
-
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h
deleted file mode 100644
index beeec77..0000000
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#include <asm/plat-s3c/regs-watchdog.h>
-#include <asm/arch/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode)
-{
- struct clk *wdtclk;
-
- if (mode == 's') {
- cpu_reset(0);
- }
-
- if (s3c24xx_reset_hook)
- s3c24xx_reset_hook();
-
- printk("arch_reset: attempting watchdog reset\n");
-
- __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
-
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
- /* put initial values into count and data */
- __raw_writel(0x80, S3C2410_WTCNT);
- __raw_writel(0x80, S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
- S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-
- /* we'll take a jump through zero as a poor second */
- cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
deleted file mode 100644
index 98f690e..0000000
--- a/include/asm-arm/arch-s3c2410/system.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/reset.h>
-
-#include <asm/arch/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
-
-void s3c24xx_default_idle(void)
-{
- unsigned long tmp;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++) {
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
- }
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
- if (s3c24xx_idle != NULL)
- (s3c24xx_idle)();
- else
- s3c24xx_default_idle();
-}
-
-#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
deleted file mode 100644
index c16a99c..0000000
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
deleted file mode 100644
index 48a5731..0000000
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/uncompress.h
- *
- * Copyright (c) 2003, 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <asm/plat-s3c/uncompress.h>
-
-static inline int is_arm926(void)
-{
- unsigned int cpuid;
-
- asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
- return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
- unsigned int cpuid;
-
- cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
- cpuid &= S3C2410_GSTATUS1_IDMASK;
-
- if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
- cpuid == S3C2410_GSTATUS1_2442) {
- fifo_mask = S3C2440_UFSTAT_TXMASK;
- fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
- } else {
- fifo_mask = S3C2410_UFSTAT_TXMASK;
- fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
- }
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
deleted file mode 100644
index 5bfa376..0000000
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - usb port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
-
-#define S3C_HCDFLG_USED (1)
-
-struct s3c2410_hcd_port {
- unsigned char flags;
- unsigned char power;
- unsigned char oc_status;
- unsigned char oc_changed;
-};
-
-struct s3c2410_hcd_info {
- struct usb_hcd *hcd;
- struct s3c2410_hcd_port port[2];
-
- void (*power_control)(int port, int to);
- void (*enable_oc)(struct s3c2410_hcd_info *, int on);
- void (*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
- if (info->report_oc != NULL) {
- (info->report_oc)(info, ports);
- }
-}
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
deleted file mode 100644
index 0ae3bdb..0000000
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
- *
- * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
deleted file mode 100644
index 0557b0a..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
deleted file mode 100644
index 8909370..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT19
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_VR1000_SERIAL IRQ_EINT12
-#define IRQ_VR1000_DM9000A IRQ_EINT10
-#define IRQ_VR1000_DM9000N IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
deleted file mode 100644
index 92a56a7..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <asm/arch/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI (0x02000000)
-#define VR1000_PA_IDEPRIAUX (0x02800000)
-#define VR1000_PA_IDESEC (0x03000000)
-#define VR1000_PA_IDESECAUX (0x03800000)
-#define VR1000_PA_DM9000 (0x05000000)
-
-#define VR1000_PA_SERIAL (0x11800000)
-#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h
deleted file mode 100644
index 65ca8c7..0000000
--- a/include/asm-arm/arch-sa1100/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-# define LANGUAGE Assembly
-# else
-# define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd) (PhAdd)
-#endif
-
-#include <asm/arch/bitfield.h>
-
-#define C 0
-#define Assembly 1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0 0x00000000
-#define __SYSTEM_CONTROL1 0x00000400
-#define __ARBITER 0x00020000
-#define __SYSTEM_CONTROL2 0x00040000
-#define __SYSTEM_CONTROL3 0x00060000
-#define __PARALLEL_PORT 0x00080000
-#define __VIDMEM_CONTROL 0x00100000
-#define __UPDATE_FIFO 0x00120000
-#define __SHMEM_CONTROL1 0x00140000
-#define __INTERRUPT_CONTROL 0x00160000
-#define __USB_CONTROL 0x00180000
-#define __TRACK_INTERFACE 0x001a0000
-#define __MOUSE_INTERFACE 0x001b0000
-#define __KEYPAD_INTERFACE 0x001c0000
-#define __PCMCIA_INTERFACE 0x001e0000
-#define __VGA_CONTROL 0x00200000
-#define __GPIO_INTERFACE 0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x ) ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- * SKCR SA-1101 control register (read/write)
- * SMCR Shared Memory Controller Register
- * SNPR Snoop Register
- */
-
-#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
-#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
-#define SKCR_Sleep 0x0004 /* Sleep Mode */
-#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
-#define SKCR_VCOON 0x0010 /* VCO bias */
-#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
-#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
-
-#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
-#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
-#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
-#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
- (( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
- (( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
-#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
-#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
-#define SNPR_BankSelect Fld(2,27) /* Bank select */
-#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
- ( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
- (( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- * VMCCR Configuration register
- * VMCAR VMC address register
- * VMCDR VMC data register
- *
- */
-
-#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
-#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
-#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
-#define VMCCR_Config 0x0001 /* DRAM size */
-#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
-#define VMCCR_RefTest (1<<10) /* refresh test */
-#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
-#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
-#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
-#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- * UFCR Update FIFO Control Register
- * UFSR Update FIFO Status Register
- * UFLVLR update FIFO level register
- * UFDR update FIFO data register
- */
-
-#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
-#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
-#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
-#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
-#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- * SKPCR Power Control Register
- * SKCDR Clock Divider Register
- * DACDR1 DAC1 Data register
- * DACDR2 DAC2 Data register
- */
-
-#define _SKPCR _SA1101(0x00000400)
-#define _SKCDR _SA1101(0x00040000)
-#define _DACDR1 _SA1101(0x00060000)
-#define _DACDR2 _SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn 0x01 /* USB Enable */
-#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
-#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
-#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
-#define SKPCR_DCLKEn 0x20 /* DACs Enable */
-#define SKPCR_nKPADEn 0x40 /* Multiplexer */
-
-#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
-#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
-#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
-#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
-#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
-#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
-#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
-#define SKDCR_ChargePump (1<<25) /* Charge pump control */
-#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
-#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
-#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
-
-#define DACDR_DACCount Fld(8,0) /* Count value */
-#define DACDR1_DACCount DACDR_DACCount
-#define DACDR2_DACCount DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- * IEEE_Config IEEE mode selection and programmable attributes
- * IEEE_Control Controls the states of IEEE port control outputs
- * IEEE_Data Forward transfer data register
- * IEEE_Addr Forward transfer address register
- * IEEE_Status Port IO signal status register
- * IEEE_IntStatus Port interrupts status register
- * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
- * IEEE_InitTime Forward timeout counter initial value
- * IEEE_TimerStatus Forward timeout counter current value
- * IEEE_FifoReset Reset forward transfer FIFO
- * IEEE_ReloadValue Counter reload value
- * IEEE_TestControl Control testmode
- * IEEE_TestDataIn Test data register
- * IEEE_TestDataInEn Enable test data
- * IEEE_TestCtrlIn Test control signals
- * IEEE_TestCtrlInEn Enable test control signals
- * IEEE_TestDataStat Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address
- */
-
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config _IEEE( 0x0000 )
-#define _IEEE_Control _IEEE( 0x0400 )
-#define _IEEE_Data _IEEE( 0x4000 )
-#define _IEEE_Addr _IEEE( 0x0800 )
-#define _IEEE_Status _IEEE( 0x0c00 )
-#define _IEEE_IntStatus _IEEE( 0x1000 )
-#define _IEEE_FifoLevels _IEEE( 0x1400 )
-#define _IEEE_InitTime _IEEE( 0x1800 )
-#define _IEEE_TimerStatus _IEEE( 0x1c00 )
-#define _IEEE_FifoReset _IEEE( 0x2000 )
-#define _IEEE_ReloadValue _IEEE( 0x3c00 )
-#define _IEEE_TestControl _IEEE( 0x2400 )
-#define _IEEE_TestDataIn _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
-#define _IEEE_TestDataStat _IEEE( 0x3800 )
-
-
-#if LANGUAGE == C
-#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M Fld(3,0) /* Mode select */
-#define IEEE_Config_D 0x04 /* FIFO access enable */
-#define IEEE_Config_B 0x08 /* 9-bit word enable */
-#define IEEE_Config_T 0x10 /* Data transfer enable */
-#define IEEE_Config_A 0x20 /* Data transfer direction */
-#define IEEE_Config_E 0x40 /* Timer enable */
-#define IEEE_Control_A 0x08 /* AutoFd output */
-#define IEEE_Control_E 0x04 /* Selectin output */
-#define IEEE_Control_T 0x02 /* Strobe output */
-#define IEEE_Control_I 0x01 /* Port init output */
-#define IEEE_Data_C (1<<31) /* Byte count */
-#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
-#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
-#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
-#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
-#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
-#define IEEE_Status_T 0x0040 /* nStrobe port output status */
-#define IEEE_Status_I 0x0020 /* nInit port output status */
-#define IEEE_Status_B 0x0010 /* Busy port inout status */
-#define IEEE_Status_S 0x0008 /* Select port input status */
-#define IEEE_Status_K 0x0004 /* nAck port input status */
-#define IEEE_Status_F 0x0002 /* nFault port input status */
-#define IEEE_Status_R 0x0001 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat 0x0100
-#define IEEE_IntStatus_IntReqEmp 0x0080
-#define IEEE_IntStatus_IntReqInt 0x0040
-#define IEEE_IntStatus_IntReqRav 0x0020
-#define IEEE_IntStatus_IntReqTim 0x0010
-#define IEEE_IntStatus_RevAddrComp 0x0008
-#define IEEE_IntStatus_RevDataComp 0x0004
-#define IEEE_IntStatus_FwdAddrComp 0x0002
-#define IEEE_IntStatus_FwdDataComp 0x0001
-#define IEEE_FifoLevels_RevFifoLevel 2
-#define IEEE_FifoLevels_FwdFifoLevel 1
-#define IEEE_InitTime_TimValInit Fld(22,0)
-#define IEEE_TimerStatus_TimValStat Fld(22,0)
-#define IEEE_ReloadValue_Reload Fld(4,0)
-
-#define IEEE_TestControl_RegClk 0x04
-#define IEEE_TestControl_ClockSelect Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError 0x10
-#define IEEE_TestCtrlIn_nFault 0x08
-#define IEEE_TestCtrlIn_nAck 0x04
-#define IEEE_TestCtrlIn_PSel 0x02
-#define IEEE_TestCtrlIn_Busy 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- * VideoControl Video Control Register
- * VgaTiming0 VGA Timing Register 0
- * VgaTiming1 VGA Timing Register 1
- * VgaTiming2 VGA Timing Register 2
- * VgaTiming3 VGA Timing Register 3
- * VgaBorder VGA Border Color Register
- * VgaDBAR VGADMA Base Address Register
- * VgaDCAR VGADMA Channel Current Address Register
- * VgaStatus VGA Status Register
- * VgaInterruptMask VGA Interrupt Mask Register
- * VgaPalette VGA Palette Registers
- * DacControl DAC Control Register
- * VgaTest VGA Controller Test Register
- */
-
-#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl _VGA( 0x0000 )
-#define _VgaTiming0 _VGA( 0x0400 )
-#define _VgaTiming1 _VGA( 0x0800 )
-#define _VgaTiming2 _VGA( 0x0c00 )
-#define _VgaTiming3 _VGA( 0x1000 )
-#define _VgaBorder _VGA( 0x1400 )
-#define _VgaDBAR _VGA( 0x1800 )
-#define _VgaDCAR _VGA( 0x1c00 )
-#define _VgaStatus _VGA( 0x2000 )
-#define _VgaInterruptMask _VGA( 0x2400 )
-#define _VgaPalette _VGA( 0x40000 )
-#define _DacControl _VGA( 0x3000 )
-#define _VgaTest _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn 0x00000000
-#define VideoControl_BGR 0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq Fld(4,4)
-#define VideoControl_VBurstL Fld(4,8)
-#define VideoControl_VMode (1<<12)
-#define VideoControl_PalRead (1<<13)
-
-#define VgaTiming0_PPL Fld(6,2)
-#define VgaTiming0_HSW Fld(8,8)
-#define VgaTiming0_HFP Fld(8,16)
-#define VgaTiming0_HBP Fld(8,24)
-
-#define VgaTiming1_LPS Fld(10,0)
-#define VgaTiming1_VSW Fld(6,10)
-#define VgaTiming1_VFP Fld(8,16)
-#define VgaTiming1_VBP Fld(8,24)
-
-#define VgaTiming2_IVS 0x01
-#define VgaTiming2_IHS 0x02
-#define VgaTiming2_CVS 0x04
-#define VgaTiming2_CHS 0x08
-
-#define VgaTiming3_HBS Fld(8,0)
-#define VgaTiming3_HBE Fld(8,8)
-#define VgaTiming3_VBS Fld(8,16)
-#define VgaTiming3_VBE Fld(8,24)
-
-#define VgaBorder_BCOL Fld(24,0)
-
-#define VgaStatus_VFUF 0x01
-#define VgaStatus_VNext 0x02
-#define VgaStatus_VComp 0x04
-
-#define VgaInterruptMask_VFUFMask 0x00
-#define VgaInterruptMask_VNextMask 0x01
-#define VgaInterruptMask_VCompMask 0x02
-
-#define VgaPalette_R Fld(8,0)
-#define VgaPalette_G Fld(8,8)
-#define VgaPalette_B Fld(8,16)
-
-#define DacControl_DACON 0x0001
-#define DacControl_COMPON 0x0002
-#define DacControl_PEDON 0x0004
-#define DacControl_RTrim Fld(5,4)
-#define DacControl_GTrim Fld(5,9)
-#define DacControl_BTrim Fld(5,14)
-
-#define VgaTest_TDAC 0x00
-#define VgaTest_Datatest Fld(4,1)
-#define VgaTest_DACTESTDAC 0x10
-#define VgaTest_DACTESTOUT Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- * Revision
- * Control
- * CommandStatus
- * InterruptStatus
- * InterruptEnable
- * HCCA
- * PeriodCurrentED
- * ControlHeadED
- * BulkHeadED
- * BulkCurrentED
- * DoneHead
- * FmInterval
- * FmRemaining
- * FmNumber
- * PeriodicStart
- * LSThreshold
- * RhDescriptorA
- * RhDescriptorB
- * RhStatus
- * RhPortStatus
- * USBStatus
- * USBReset
- * USTAR
- * USWER
- * USRFR
- * USNFR
- * USTCSR
- * USSR
- *
- */
-
-#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision _USB( 0x0000 )
-#define _Control _USB( 0x0888 )
-#define _CommandStatus _USB( 0x0c00 )
-#define _InterruptStatus _USB( 0x1000 )
-#define _InterruptEnable _USB( 0x1400 )
-#define _HCCA _USB( 0x1800 )
-#define _PeriodCurrentED _USB( 0x1c00 )
-#define _ControlHeadED _USB( 0x2000 )
-#define _BulkHeadED _USB( 0x2800 )
-#define _BulkCurrentED _USB( 0x2c00 )
-#define _DoneHead _USB( 0x3000 )
-#define _FmInterval _USB( 0x3400 )
-#define _FmRemaining _USB( 0x3800 )
-#define _FmNumber _USB( 0x3c00 )
-#define _PeriodicStart _USB( 0x4000 )
-#define _LSThreshold _USB( 0x4400 )
-#define _RhDescriptorA _USB( 0x4800 )
-#define _RhDescriptorB _USB( 0x4c00 )
-#define _RhStatus _USB( 0x5000 )
-#define _RhPortStatus _USB( 0x5400 )
-#define _USBStatus _USB( 0x11800 )
-#define _USBReset _USB( 0x11c00 )
-
-#define _USTAR _USB( 0x10400 )
-#define _USWER _USB( 0x10800 )
-#define _USRFR _USB( 0x10c00 )
-#define _USNFR _USB( 0x11000 )
-#define _USTCSR _USB( 0x11400 )
-#define _USSR _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control (*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp (1<<7)
-#define USBStatus_IrqHciBuffAcc (1<<8)
-#define USBStatus_nIrqHciM (1<<9)
-#define USBStatus_nHciMFClr (1<<10)
-
-#define USBReset_ForceIfReset 0x01
-#define USBReset_ForceHcReset 0x02
-#define USBReset_ClkGenReset 0x04
-
-#define USTCR_RdBstCntrl Fld(3,0)
-#define USTCR_ByteEnable Fld(4,3)
-#define USTCR_WriteEn (1<<7)
-#define USTCR_FifoCir (1<<8)
-#define USTCR_TestXferSel (1<<9)
-#define USTCR_FifoCirAtEnd (1<<10)
-#define USTCR_nSimScaleDownClk (1<<11)
-
-#define USSR_nAppMDEmpty 0x01
-#define USSR_nAppMDFirst 0x02
-#define USSR_nAppMDLast 0x04
-#define USSR_nAppMDFull 0x08
-#define USSR_nAppMAFull 0x10
-#define USSR_XferReq 0x20
-#define USSR_XferEnd 0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- * INTTEST0 Test register 0
- * INTTEST1 Test register 1
- * INTENABLE0 Interrupt Enable register 0
- * INTENABLE1 Interrupt Enable register 1
- * INTPOL0 Interrupt Polarity selection 0
- * INTPOL1 Interrupt Polarity selection 1
- * INTTSTSEL Interrupt source selection
- * INTSTATCLR0 Interrupt Status 0
- * INTSTATCLR1 Interrupt Status 1
- * INTSET0 Interrupt Set 0
- * INTSET1 Interrupt Set 1
- */
-
-#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0 _INT( 0x1000 )
-#define _INTTEST1 _INT( 0x1400 )
-#define _INTENABLE0 _INT( 0x2000 )
-#define _INTENABLE1 _INT( 0x2400 )
-#define _INTPOL0 _INT( 0x3000 )
-#define _INTPOL1 _INT( 0x3400 )
-#define _INTTSTSEL _INT( 0x5000 )
-#define _INTSTATCLR0 _INT( 0x6000 )
-#define _INTSTATCLR1 _INT( 0x6400 )
-#define _INTSET0 _INT( 0x7000 )
-#define _INTSET1 _INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers (prefix kbd applies to trackpad interface, mse to mouse)
- * KBDCR Control Register
- * KBDSTAT Status Register
- * KBDDATA Transmit/Receive Data register
- * KBDCLKDIV Clock Division Register
- * KBDPRECNT Clock Precount Register
- * KBDTEST1 Test register 1
- * KBDTEST2 Test register 2
- * KBDTEST3 Test register 3
- * KBDTEST4 Test register 4
- * MSECR
- * MSESTAT
- * MSEDATA
- * MSECLKDIV
- * MSEPRECNT
- * MSETEST1
- * MSETEST2
- * MSETEST3
- * MSETEST4
- *
- */
-
-#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR _KBD( 0x0000 )
-#define _KBDSTAT _KBD( 0x0400 )
-#define _KBDDATA _KBD( 0x0800 )
-#define _KBDCLKDIV _KBD( 0x0c00 )
-#define _KBDPRECNT _KBD( 0x1000 )
-#define _KBDTEST1 _KBD( 0x2000 )
-#define _KBDTEST2 _KBD( 0x2400 )
-#define _KBDTEST3 _KBD( 0x2800 )
-#define _KBDTEST4 _KBD( 0x2c00 )
-#define _MSECR _MSE( 0x0000 )
-#define _MSESTAT _MSE( 0x0400 )
-#define _MSEDATA _MSE( 0x0800 )
-#define _MSECLKDIV _MSE( 0x0c00 )
-#define _MSEPRECNT _MSE( 0x1000 )
-#define _MSETEST1 _MSE( 0x2000 )
-#define _MSETEST2 _MSE( 0x2400 )
-#define _MSETEST3 _MSE( 0x2800 )
-#define _MSETEST4 _MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA 0x08
-#define KBDCR_FKD 0x02
-#define KBDCR_FKC 0x01
-
-#define KBDSTAT_TXE 0x80
-#define KBDSTAT_TXB 0x40
-#define KBDSTAT_RXF 0x20
-#define KBDSTAT_RXB 0x10
-#define KBDSTAT_ENA 0x08
-#define KBDSTAT_RXP 0x04
-#define KBDSTAT_KBD 0x02
-#define KBDSTAT_KBC 0x01
-
-#define KBDCLKDIV_DivVal Fld(4,0)
-
-#define MSECR_ENA 0x08
-#define MSECR_FKD 0x02
-#define MSECR_FKC 0x01
-
-#define MSESTAT_TXE 0x80
-#define MSESTAT_TXB 0x40
-#define MSESTAT_RXF 0x20
-#define MSESTAT_RXB 0x10
-#define MSESTAT_ENA 0x08
-#define MSESTAT_RXP 0x04
-#define MSESTAT_MSD 0x02
-#define MSESTAT_MSC 0x01
-
-#define MSECLKDIV_DivVal Fld(4,0)
-
-#define KBDTEST1_CD 0x80
-#define KBDTEST1_RC1 0x40
-#define KBDTEST1_MC 0x20
-#define KBDTEST1_C Fld(2,3)
-#define KBDTEST1_T2 0x40
-#define KBDTEST1_T1 0x20
-#define KBDTEST1_T0 0x10
-#define KBDTEST2_TICBnRES 0x08
-#define KBDTEST2_RKC 0x04
-#define KBDTEST2_RKD 0x02
-#define KBDTEST2_SEL 0x01
-#define KBDTEST3_ms_16 0x80
-#define KBDTEST3_us_64 0x40
-#define KBDTEST3_us_16 0x20
-#define KBDTEST3_DIV8 0x10
-#define KBDTEST3_DIn 0x08
-#define KBDTEST3_CIn 0x04
-#define KBDTEST3_KD 0x02
-#define KBDTEST3_KC 0x01
-#define KBDTEST4_BC12 0x80
-#define KBDTEST4_BC11 0x40
-#define KBDTEST4_TRES 0x20
-#define KBDTEST4_CLKOE 0x10
-#define KBDTEST4_CRES 0x08
-#define KBDTEST4_RXB 0x04
-#define KBDTEST4_TXB 0x02
-#define KBDTEST4_SRX 0x01
-
-#define MSETEST1_CD 0x80
-#define MSETEST1_RC1 0x40
-#define MSETEST1_MC 0x20
-#define MSETEST1_C Fld(2,3)
-#define MSETEST1_T2 0x40
-#define MSETEST1_T1 0x20
-#define MSETEST1_T0 0x10
-#define MSETEST2_TICBnRES 0x08
-#define MSETEST2_RKC 0x04
-#define MSETEST2_RKD 0x02
-#define MSETEST2_SEL 0x01
-#define MSETEST3_ms_16 0x80
-#define MSETEST3_us_64 0x40
-#define MSETEST3_us_16 0x20
-#define MSETEST3_DIV8 0x10
-#define MSETEST3_DIn 0x08
-#define MSETEST3_CIn 0x04
-#define MSETEST3_KD 0x02
-#define MSETEST3_KC 0x01
-#define MSETEST4_BC12 0x80
-#define MSETEST4_BC11 0x40
-#define MSETEST4_TRES 0x20
-#define MSETEST4_CLKOE 0x10
-#define MSETEST4_CRES 0x08
-#define MSETEST4_RXB 0x04
-#define MSETEST4_TXB 0x02
-#define MSETEST4_SRX 0x01
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- * PADWR Port A Data Write Register
- * PBDWR Port B Data Write Register
- * PADRR Port A Data Read Register
- * PBDRR Port B Data Read Register
- * PADDR Port A Data Direction Register
- * PBDDR Port B Data Direction Register
- * PASSR Port A Sleep State Register
- * PBSSR Port B Sleep State Register
- *
- */
-
-#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR _PIO( 0x0000 )
-#define _PBDWR _PIO( 0x0400 )
-#define _PADRR _PIO( 0x0000 )
-#define _PBDRR _PIO( 0x0400 )
-#define _PADDR _PIO( 0x0800 )
-#define _PBDDR _PIO( 0x0c00 )
-#define _PASSR _PIO( 0x1000 )
-#define _PBSSR _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- * PXDWR
- * PXDRR
- * PYDWR
- * PYDRR
- *
- */
-
-#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
-
-#define _PXDWR _KEYPAD( 0x0000 )
-#define _PXDRR _KEYPAD( 0x0000 )
-#define _PYDWR _KEYPAD( 0x0400 )
-#define _PYDRR _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- * PCSR Status Register
- * PCCR Control Register
- * PCSSR Sleep State Register
- *
- */
-
-#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR _CARD( 0x0000 )
-#define _PCCR _CARD( 0x0400 )
-#define _PCSSR _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready 0x0001
-#define PCSR_S1_ready 0x0002
-#define PCSR_S0_detected 0x0004
-#define PCSR_S1_detected 0x0008
-#define PCSR_S0_VS1 0x0010
-#define PCSR_S0_VS2 0x0020
-#define PCSR_S1_VS1 0x0040
-#define PCSR_S1_VS2 0x0080
-#define PCSR_S0_WP 0x0100
-#define PCSR_S1_WP 0x0200
-#define PCSR_S0_BVD1_nSTSCHG 0x0400
-#define PCSR_S0_BVD2_nSPKR 0x0800
-#define PCSR_S1_BVD1_nSTSCHG 0x1000
-#define PCSR_S1_BVD2_nSPKR 0x2000
-
-#define PCCR_S0_VPP0 0x0001
-#define PCCR_S0_VPP1 0x0002
-#define PCCR_S0_VCC0 0x0004
-#define PCCR_S0_VCC1 0x0008
-#define PCCR_S1_VPP0 0x0010
-#define PCCR_S1_VPP1 0x0020
-#define PCCR_S1_VCC0 0x0040
-#define PCCR_S1_VCC1 0x0080
-#define PCCR_S0_reset 0x0100
-#define PCCR_S1_reset 0x0200
-#define PCCR_S0_float 0x0400
-#define PCCR_S1_float 0x0800
-
-#define PCSSR_S0_VCC0 0x0001
-#define PCSSR_S0_VCC1 0x0002
-#define PCSSR_S0_VPP0 0x0004
-#define PCSSR_S0_VPP1 0x0008
-#define PCSSR_S0_control 0x0010
-#define PCSSR_S1_VCC0 0x0020
-#define PCSSR_S1_VCC1 0x0040
-#define PCSSR_S1_VPP0 0x0080
-#define PCSSR_S1_VPP1 0x0100
-#define PCSSR_S1_control 0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h
deleted file mode 100644
index d6a1bb5..0000000
--- a/include/asm-arm/arch-sa1100/assabet.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/assabet.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- * Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_ASSABET_H
-#define __ASM_ARCH_ASSABET_H
-
-
-/* System Configuration Register flags */
-
-#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */
-#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */
-#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */
-#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */
-#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */
-#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */
-
-#define ASSABET_SCR_INIT -1
-
-extern unsigned long SCR_value;
-
-#ifdef CONFIG_ASSABET_NEPONSET
-#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
-#else
-#define machine_has_neponset() (0)
-#endif
-
-/* Board Control Register */
-
-#define ASSABET_BCR_BASE 0xf1000000
-#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
-
-#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */
-#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */
-#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */
-#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
-#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
-#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */
-#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */
-#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */
-#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */
-#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */
-#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */
-#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */
-#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */
-#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */
-#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */
-#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */
-#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */
-#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */
-#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */
-#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */
-#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */
-#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */
-#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */
-#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */
-#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
-
-#ifdef CONFIG_SA1100_ASSABET
-extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
-#else
-#define ASSABET_BCR_frob(x,y) do { } while (0)
-#endif
-
-#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x))
-#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0)
-
-#define ASSABET_BSR_BASE 0xf1000000
-#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
-
-#define ASSABET_BSR_RS232_VALID (1 << 24)
-#define ASSABET_BSR_COM_DCD (1 << 25)
-#define ASSABET_BSR_COM_CTS (1 << 26)
-#define ASSABET_BSR_COM_DSR (1 << 27)
-#define ASSABET_BSR_RAD_CTS (1 << 28)
-#define ASSABET_BSR_RAD_DSR (1 << 29)
-#define ASSABET_BSR_RAD_DCD (1 << 30)
-#define ASSABET_BSR_RAD_RI (1 << 31)
-
-
-/* GPIOs for which the generic definition doesn't say much */
-#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
-#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
-#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
-#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
-#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
-#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
-#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
-#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
-#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
-#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */
-
-#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21
-#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22
-#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24
-#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h
deleted file mode 100644
index d93a9a8..0000000
--- a/include/asm-arm/arch-sa1100/badge4.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/badge4.h
- *
- * Tim Connors <connors@hpl.hp.com>
- * Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/arch/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE (0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */
-#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */
-#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */
-#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0 (1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1 (1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n))
-#define BADGE4_5V_USB (1<<2)
-#define BADGE4_5V_INITIALLY (1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
deleted file mode 100644
index f1f0e33..0000000
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * FILE bitfield.h
- *
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
- * Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data) ((unsigned long) (Data))
-#else
-#define UData(Data) (Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- * The macro "Fld" encodes a bit field, given its size and its shift value
- * with respect to bit 0.
- *
- * Note
- * A more intuitive way to encode bit fields would have been to use their
- * mask. However, extracting size and shift value information from a bit
- * field's mask is cumbersome and might break the assembler (255-character
- * line-size limit).
- *
- * Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
- *
- * Output
- * Fld Encoded bit field.
- */
-
-#define Fld(Size, Shft) (((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- * the size, shift value, mask, aligned mask, and first bit of a
- * bit field.
- *
- * Input
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
- */
-
-#define FSize(Field) ((Field) >> 16)
-#define FShft(Field) ((Field) & 0x0000FFFF)
-#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field) (UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- * The macro "FInsrt" inserts a value into a bit field by shifting the
- * former appropriately.
- *
- * Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FInsrt Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
- (UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- * The macro "FExtr" extracts the value of a bit field by masking and
- * shifting it appropriately.
- *
- * Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FExtr Bit-field value.
- */
-
-#define FExtr(Data, Field) \
- ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h
deleted file mode 100644
index 9a19c3d0..0000000
--- a/include/asm-arm/arch-sa1100/cerf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/cerf.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO 0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19)
-#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20)
-#define CERF_GPIO_CF_RESET GPIO_GPIO (21)
-#define CERF_GPIO_CF_IRQ GPIO_GPIO (22)
-#define CERF_GPIO_CF_CD GPIO_GPIO (23)
-
-#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19
-#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20
-#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22
-#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
deleted file mode 100644
index 762eba5..0000000
--- a/include/asm-arm/arch-sa1100/collie.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/collie.h
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * ChangeLog:
- * 04-06-2001 Lineo Japan, Inc.
- * 04-16-2001 SHARP Corporation
- * 07-07-2002 Chris Larson <clarson@digi.com>
- *
- */
-#ifndef __ASM_ARCH_COLLIE_H
-#define __ASM_ARCH_COLLIE_H
-
-
-#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
-#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
-#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
-#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
-#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
-#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
-#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
-#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
-
-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
- COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
- COLLIE_SCP_CHARGE_ON )
-
-/* GPIOs for which the generic definition doesn't say much */
-
-#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
-#define COLLIE_GPIO_CO GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
-
-/* Interrupts */
-
-#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
-#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
-#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
-#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
-#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
-#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
-#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
-#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
-#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
-#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
-#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
-
-#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
-
-/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
-#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
-#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
-#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
-#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
-#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
-#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
-#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
-#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
-#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
-#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
- UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
deleted file mode 100644
index 1b77536..0000000
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-sa1100/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <asm/arch/hardware.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x80000000 @ physical base address
- movne \rx, #0xf8000000 @ virtual address
-
- @ We probe for the active serial port here, coherently with
- @ the comment in include/asm-arm/arch-sa1100/uncompress.h.
- @ We assume r1 can be clobbered.
-
- @ see if Ser3 is active
- add \rx, \rx, #0x00050000
- ldr r1, [\rx, #UTCR3]
- tst r1, #UTCR3_TXE
-
- @ if Ser3 is inactive, then try Ser1
- addeq \rx, \rx, #(0x00010000 - 0x00050000)
- ldreq r1, [\rx, #UTCR3]
- tsteq r1, #UTCR3_TXE
-
- @ if Ser1 is inactive, then try Ser2
- addeq \rx, \rx, #(0x00030000 - 0x00010000)
- ldreq r1, [\rx, #UTCR3]
- tsteq r1, #UTCR3_TXE
-
- @ if all ports are inactive, then there is nothing we can do
- moveq pc, lr
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UTDR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TNF
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TBY
- bne 1001b
- .endm
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
deleted file mode 100644
index 6b7917a..0000000
--- a/include/asm-arm/arch-sa1100/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS 6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE 0x1fff
-#define CUT_DMA_SIZE 0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
- DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */
- DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */
- DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */
- DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */
- DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */
- DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */
- DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */
- DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */
- DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */
- DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */
- DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */
- DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */
- DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */
- DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */
- DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */
- DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */
- DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */
- DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
- volatile u_long DDAR;
- volatile u_long SetDCSR;
- volatile u_long ClrDCSR;
- volatile u_long RdDCSR;
- volatile dma_addr_t DBSA;
- volatile u_long DBTA;
- volatile dma_addr_t DBSB;
- volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
- dma_callback_t callback, void *data,
- dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * sa1100_stop_dma - stop DMA in progress
- * @regs: identifier for the channel to use
- *
- * This stops DMA without clearing buffer pointers. Unlike
- * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * or sa1100_get_dma_pos().
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * sa1100_resume_dma - resume DMA on a stopped channel
- * @regs: identifier for the channel to use
- *
- * This resumes DMA on a channel previously stopped with
- * sa1100_stop_dma().
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * sa1100_clear_dma - clear DMA pointers
- * @regs: identifier for the channel to use
- *
- * This clear any DMA state so the DMA engine is ready to restart
- * with new buffers through sa1100_start_dma(). Any buffers in flight
- * are discarded.
- *
- * The @regs identifier is provided by a successful call to
- * sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
deleted file mode 100644
index 127db4a..0000000
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/entry-macro.S
- *
- * Low-level IRQ helper macros for SA1100-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #0xfa000000 @ ICIP = 0xfa050000
- add \base, \base, #0x00050000
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base] @ get irqs
- ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
- ands \irqstat, \irqstat, \irqnr
- mov \irqnr, #0
- beq 1001f
- tst \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tsteq \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tsteq \irqstat, #0xff
- moveq \irqstat, \irqstat, lsr #8
- addeq \irqnr, \irqnr, #8
- tst \irqstat, #0x0f
- moveq \irqstat, \irqstat, lsr #4
- addeq \irqnr, \irqnr, #4
- tst \irqstat, #0x03
- moveq \irqstat, \irqstat, lsr #2
- addeq \irqnr, \irqnr, #2
- tst \irqstat, #0x01
- addeqs \irqnr, \irqnr, #1
-1001:
- .endm
-
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h
deleted file mode 100644
index e66ecf7..0000000
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
- return GPLR & GPIO_GPIO(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
- if (value)
- GPSR = GPIO_GPIO(gpio);
- else
- GPCR = GPIO_GPIO(gpio);
- else
- __gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- if (gpio < 11)
- return IRQ_GPIO0 + gpio;
- else
- return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIO11_27)
- return irq - IRQ_GPIO0;
- else
- return irq - IRQ_GPIO11 + 11;
-}
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
deleted file mode 100644
index 1abd7cf..0000000
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/hardware.h
- *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware definitions for SA1100 architecture
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- * Definitions for SA1111 added.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define UNCACHEABLE_ADDR 0xfa050000
-
-
-/*
- * SA1100 internal I/O mappings
- *
- * We have the following mapping:
- * phys virt
- * 80000000 f8000000
- * 90000000 fa000000
- * a0000000 fc000000
- * b0000000 fe000000
- */
-
-#define VIO_BASE 0xf8000000 /* virtual start of IO space */
-#define VIO_SHIFT 3 /* x = IO space shrink power */
-#define PIO_START 0x80000000 /* physical start of IO space */
-
-#define io_p2v( x ) \
- ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
-#define io_v2p( x ) \
- ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
-# define __PREG(x) (io_v2p((unsigned long)&(x)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-#endif
-
-#include "SA-1100.h"
-
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
deleted file mode 100644
index 24972f3..0000000
--- a/include/asm-arm/arch-sa1100/ide.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- * Get rid of the special ide_init_hwif_ports() functions
- * and make a generalised function that can be used by all
- * architectures.
- */
-
-#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- int i;
- int regincr = 1;
-
- /* The Empeg board has the first two address lines unused */
- if (machine_is_empeg())
- regincr = 1 << 2;
-
- /* The LART doesn't use A0 for IDE */
- if (machine_is_lart())
- regincr = 1 << 1;
-
- memset(hw, 0, sizeof(*hw));
-
- for (i = 0; i <= 7; i++) {
- hw->io_ports_array[i] = reg;
- reg += regincr;
- }
-
- hw->io_ports.ctl_addr = ctrl_port;
-
- if (irq)
- *irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
- if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
- hw_regs_t hw;
-
- /* Enable GPIO as interrupt line */
- GPDR &= ~LART_GPIO_IDE;
- set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
-
- /* set PCMCIA interface timing */
- MECR = 0x00060006;
-
- /* init the interface */
- ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
- hw.irq = LART_IRQ_IDE;
- ide_register_hw(&hw);
-#endif
- }
-}
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
deleted file mode 100644
index 0756269..0000000
--- a/include/asm-arm/arch-sa1100/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
deleted file mode 100644
index 7bf8048..0000000
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/irqs.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
- * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
- *
- * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
- */
-
-#define IRQ_GPIO0 0
-#define IRQ_GPIO1 1
-#define IRQ_GPIO2 2
-#define IRQ_GPIO3 3
-#define IRQ_GPIO4 4
-#define IRQ_GPIO5 5
-#define IRQ_GPIO6 6
-#define IRQ_GPIO7 7
-#define IRQ_GPIO8 8
-#define IRQ_GPIO9 9
-#define IRQ_GPIO10 10
-#define IRQ_GPIO11_27 11
-#define IRQ_LCD 12 /* LCD controller */
-#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
-#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
-#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
-#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
-#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
-#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
-#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
-#define IRQ_DMA0 20 /* DMA controller channel 0 */
-#define IRQ_DMA1 21 /* DMA controller channel 1 */
-#define IRQ_DMA2 22 /* DMA controller channel 2 */
-#define IRQ_DMA3 23 /* DMA controller channel 3 */
-#define IRQ_DMA4 24 /* DMA controller channel 4 */
-#define IRQ_DMA5 25 /* DMA controller channel 5 */
-#define IRQ_OST0 26 /* OS Timer match 0 */
-#define IRQ_OST1 27 /* OS Timer match 1 */
-#define IRQ_OST2 28 /* OS Timer match 2 */
-#define IRQ_OST3 29 /* OS Timer match 3 */
-#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
-#define IRQ_RTCAlrm 31 /* RTC Alarm */
-
-#define IRQ_GPIO11 32
-#define IRQ_GPIO12 33
-#define IRQ_GPIO13 34
-#define IRQ_GPIO14 35
-#define IRQ_GPIO15 36
-#define IRQ_GPIO16 37
-#define IRQ_GPIO17 38
-#define IRQ_GPIO18 39
-#define IRQ_GPIO19 40
-#define IRQ_GPIO20 41
-#define IRQ_GPIO21 42
-#define IRQ_GPIO22 43
-#define IRQ_GPIO23 44
-#define IRQ_GPIO24 45
-#define IRQ_GPIO25 46
-#define IRQ_GPIO26 47
-#define IRQ_GPIO27 48
-
-/*
- * The next 16 interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits. IRQs 49 to 64 are available.
- */
-#define IRQ_BOARD_START 49
-#define IRQ_BOARD_END 65
-
-#define IRQ_SA1111_START (IRQ_BOARD_END)
-#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
-#define SSPXMTINT (IRQ_BOARD_END + 24)
-#define SSPRCVINT (IRQ_BOARD_END + 25)
-#define SSPROR (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
-#define AUDTFSR (IRQ_BOARD_END + 36)
-#define AUDRFSR (IRQ_BOARD_END + 37)
-#define AUDTUR (IRQ_BOARD_END + 38)
-#define AUDROR (IRQ_BOARD_END + 39)
-#define AUDDTS (IRQ_BOARD_END + 40)
-#define AUDRDD (IRQ_BOARD_END + 41)
-#define AUDSTO (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR (IRQ_BOARD_END + 43)
-#define IRQ_HCIM (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS (IRQ_BOARD_END)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
-#else
-#define NR_IRQS (IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs. Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
-#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT 9
-
-#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT 5
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h
deleted file mode 100644
index 45d2bb5..0000000
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/jornada720.h
- *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
- *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- /* HP Jornada 7xx microprocessor commands */
-#define GETBATTERYDATA 0xc0
-#define GETSCANKEYCODE 0x90
-#define GETTOUCHSAMPLES 0xa0
-#define GETCONTRAST 0xD0
-#define SETCONTRAST 0xD1
-#define GETBRIGHTNESS 0xD2
-#define SETBRIGHTNESS 0xD3
-#define CONTRASTOFF 0xD8
-#define BRIGHTNESSOFF 0xD9
-#define PWMOFF 0xDF
-#define TXDUMMY 0x11
-#define ERRORCODE 0x00
diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h
deleted file mode 100644
index f58a227..0000000
--- a/include/asm-arm/arch-sa1100/mcp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/mcp.h
- *
- * Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
- u32 mccr0;
- u32 mccr1;
- unsigned int sclk_rate;
-};
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
deleted file mode 100644
index 0e907fc..0000000
--- a/include/asm-arm/arch-sa1100/memory.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PHYS_OFFSET UL(0xc0000000)
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
- sa1111_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
-
-#endif
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much convenient to use Linux's NUMA support to implement our
- * memory map representation. Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
- *
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS 27
-
-/*
- * Cache flushing area - SA1100 zero bank
- */
-#define FLUSH_BASE_PHYS 0xe0000000
-#define FLUSH_BASE 0xf5000000
-#define FLUSH_BASE_MINICACHE 0xf5100000
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h
deleted file mode 100644
index 09ec9e2..0000000
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/neponset.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- * Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_NEPONSET_H
-#define __ASM_ARCH_NEPONSET_H
-
-/*
- * Neponset definitions:
- */
-
-#define NEPONSET_CPLD_BASE (0x10000000)
-#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR 0x10000024 /* Interrupt Reason Register */
-#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
-#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
-#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
-#define _NCR_0 0x100000a0 /* Control Register (RW) */
-#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
-#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
-#define _SWPK 0x10000020 /* Switch pack (RO) */
-#define _WHOAMI 0x10000000 /* System ID Register (RO) */
-
-#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
-
-#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET (1<<0)
-#define IRR_USAR (1<<1)
-#define IRR_SA1111 (1<<2)
-
-#define AUD_SEL_1341 (1<<0)
-#define AUD_MUTE_1341 (1<<1)
-
-#define MDM_CTL0_RTS1 (1 << 0)
-#define MDM_CTL0_DTR1 (1 << 1)
-#define MDM_CTL0_RTS2 (1 << 2)
-#define MDM_CTL0_DTR2 (1 << 3)
-
-#define MDM_CTL1_CTS1 (1 << 0)
-#define MDM_CTL1_DSR1 (1 << 1)
-#define MDM_CTL1_DCD1 (1 << 2)
-#define MDM_CTL1_CTS2 (1 << 3)
-#define MDM_CTL1_DSR2 (1 << 4)
-#define MDM_CTL1_DCD2 (1 << 5)
-
-#define NCR_GP01_OFF (1<<0)
-#define NCR_TP_PWR_EN (1<<1)
-#define NCR_MS_PWR_EN (1<<2)
-#define NCR_ENET_OSC_EN (1<<3)
-#define NCR_SPI_KB_WK_UP (1<<4)
-#define NCR_A0VPP (1<<5)
-#define NCR_A1VPP (1<<6)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h
deleted file mode 100644
index 034301d..0000000
--- a/include/asm-arm/arch-sa1100/simpad.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS GPIO_GPIO14
-#define GPIO_UART1_DTR GPIO_GPIO7
-#define GPIO_UART1_CTS GPIO_GPIO8
-#define GPIO_UART1_DCD GPIO_GPIO23
-#define GPIO_UART1_DSR GPIO_GPIO6
-
-#define GPIO_UART3_RTS GPIO_GPIO12
-#define GPIO_UART3_DTR GPIO_GPIO16
-#define GPIO_UART3_CTS GPIO_GPIO13
-#define GPIO_UART3_DCD GPIO_GPIO18
-#define GPIO_UART3_DSR GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON GPIO_GPIO0
-#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS IRQ_GPIO15
-#define IRQ_UART1_DCD GPIO_GPIO23
-#define IRQ_UART1_DSR GPIO_GPIO6
-#define IRQ_UART3_CTS GPIO_GPIO13
-#define IRQ_UART3_DCD GPIO_GPIO18
-#define IRQ_UART3_DSR GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*--- PCMCIA ---*/
-#define GPIO_CF_CD GPIO_GPIO24
-#define GPIO_CF_IRQ GPIO_GPIO1
-#define IRQ_GPIO_CF_IRQ IRQ_GPIO1
-#define IRQ_GPIO_CF_CD IRQ_GPIO24
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
-
-// CS3 Latch is write only, a shadow is necessary
-
-#define CS3BUSTYPE unsigned volatile long
-#define CS3_BASE 0xf1000000
-
-#define VCC_5V_EN 0x0001 // For 5V PCMCIA
-#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA
-#define EN1 0x0004 // This is only for EPROM's
-#define EN0 0x0008 // Both should be enable for 3.3V or 5V
-#define DISPLAY_ON 0x0010
-#define PCMCIA_BUFF_DIS 0x0020
-#define MQ_RESET 0x0040
-#define PCMCIA_RESET 0x0080
-#define DECT_POWER_ON 0x0100
-#define IRDA_SD 0x0200 // Shutdown for powersave
-#define RS232_ON 0x0400
-#define SD_MEDIAQ 0x0800 // Shutdown for powersave
-#define LED2_ON 0x1000
-#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode
-#define ENABLE_5V 0x4000 // Enable 5V circuit
-#define RESET_SIMCARD 0x8000
-
-#define RS232_ENABLE 0x0440
-#define PCMCIAMASK 0x402f
-
-
-struct simpad_battery {
- unsigned char ac_status; /* line connected yes/no */
- unsigned char status; /* battery loading yes/no */
- unsigned char percentage; /* percentage loaded */
- unsigned short life; /* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE 0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH 0x01
-#define SIMPAD_BATT_STATUS_LOW 0x02
-#define SIMPAD_BATT_STATUS_CRITICAL 0x04
-#define SIMPAD_BATT_STATUS_CHARGING 0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10
-#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT 0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN 0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
deleted file mode 100644
index 63375a0..0000000
--- a/include/asm-arm/arch-sa1100/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- /* Use on-chip reset capability */
- RSRR = RSRR_SWR;
- }
-}
diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h
deleted file mode 100644
index 837be9b..0000000
--- a/include/asm-arm/arch-sa1100/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE 3686400
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
deleted file mode 100644
index 17e64d2..0000000
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/uncompress.h
- *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
- *
- * Reorganised to be machine independent.
- */
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = _Ser3UTCR0;
- if (UART(UTCR3) & UTCR3_TXE) break;
- serial_port = _Ser1UTCR0;
- if (UART(UTCR3) & UTCR3_TXE) break;
- serial_port = _Ser2UTCR0;
- if (UART(UTCR3) & UTCR3_TXE) break;
- return;
- } while (0);
-
- /* wait for space in the UART's transmitter */
- while (!(UART(UTSR1) & UTSR1_TNF))
- barrier();
-
- /* send the character out. */
- UART(UTDR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
deleted file mode 100644
index 2fb1c6f..0000000
--- a/include/asm-arm/arch-sa1100/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/vmalloc.h
- */
-#define VMALLOC_END (0xe8000000)
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S
deleted file mode 100644
index 7cb37f7..0000000
--- a/include/asm-arm/arch-shark/debug-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/arch-shark/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mov \rx, #0xe0000000
- orr \rx, \rx, #0x000003f8
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
- mov \rd, #0
-1001: add \rd, \rd, #1
- teq \rd, #0x10000
- bne 1001b
- .endm
-
- .macro waituart,rd,rx
- .endm
diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h
deleted file mode 100644
index fc985d5..0000000
--- a/include/asm-arm/arch-shark/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev / .properties
- * in OpenFirmware.
- */
-#define MAX_DMA_ADDRESS 0xC0400000
-#define MAX_DMA_CHANNELS 8
-#define DMA_ISA_CASCADE 4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S
deleted file mode 100644
index 82463f3..0000000
--- a/include/asm-arm/arch-shark/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-shark/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #0xe0000000
-
- mov \irqstat, #0x0C
- strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */
- ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 43f
- and \irqnr, \irqnr, #7
- teq \irqnr, #2
- bne 44f
-43: mov \irqstat, #0x0C
- strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
- ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 44f
- and \irqnr, \irqnr, #7
- add \irqnr, \irqnr, #8
-44: teq \irqstat, #0
- .endm
-
diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h
deleted file mode 100644
index ecba452..0000000
--- a/include/asm-arm/arch-shark/hardware.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE 0xe0000000
-
-#else
-
-#define IO_BASE 0
-
-#endif
-
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-#define PCIO_BASE 0xe0000000
-
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
-#define UNCACHEABLE_ADDR 0xdf010000
-
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
-
-#define pcibios_assign_all_busses() 1
-
-#define PCIBIOS_MIN_IO 0x6000
-#define PCIBIOS_MIN_MEM 0x50000000
-#define PCIMEM_BASE 0xe8000000
-
-#endif
-
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
deleted file mode 100644
index b11d786..0000000
--- a/include/asm-arm/arch-shark/io.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port) \
-{ \
- if (__PORT_PCIO(port)) \
- return (unsigned int)(PCIO_BASE + (port)); \
- else \
- return (unsigned int)(IO_BASE + (port)); \
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p) \
- (*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p) \
- (*(volatile unsigned char *)(p))
-
-#define outl_t(v,p) \
- (*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p) \
- (*(volatile unsigned long *)(p))
-
-#endif
diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h
deleted file mode 100644
index b36cc97..0000000
--- a/include/asm-arm/arch-shark/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS 16
-
-#define IRQ_ISA_KEYBOARD 1
-#define RTC_IRQ 8
-#define I8042_KBD_IRQ 1
-#define I8042_AUX_IRQ 12
-#define IRQ_HARDDISK 14
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
deleted file mode 100644
index 6968d61..0000000
--- a/include/asm-arm/arch-shark/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x08000000)
-
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size)
-{
- if (node != 0) return;
- /* Only the first 4 MB (=1024 Pages) are usable for DMA */
- zone_size[1] = zone_size[0] - 1024;
- zone_size[0] = 1024;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(node, size, holes) \
- __arch_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
-
-#endif
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS 0x80000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h
deleted file mode 100644
index f12d771..0000000
--- a/include/asm-arm/arch-shark/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-
-static void arch_reset(char mode)
-{
- short temp;
- local_irq_disable();
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-
-}
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h
deleted file mode 100644
index 0d02d25..0000000
--- a/include/asm-arm/arch-shark/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h
deleted file mode 100644
index 7eca653..0000000
--- a/include/asm-arm/arch-shark/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
- int t;
-
- SERIAL_BASE[0] = c;
- t=0x10000;
- while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
- int i;
- char x;
-
- putc('0');
- putc('x');
- for (i=0;i<8;i++) {
- x='0'+((z>>((7-i)*4))&0xf);
- if (x>'9') x=x-'0'+'A'-10;
- putc(x);
- }
-}
-
-static void putr()
-{
- putc('\n');
- putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
deleted file mode 100644
index fac37c6..0000000
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/vmalloc.h
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
deleted file mode 100644
index fe106d1..0000000
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-versatile/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xf1000000 @ virtual base
- orr \rx, \rx, #0x001F0000
- orr \rx, \rx, #0x00001000
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
deleted file mode 100644
index 6425773..0000000
--- a/include/asm-arm/arch-versatile/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/dma.h
- *
- * Copyright (C) 2003 ARM Limited.
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
deleted file mode 100644
index cd11416..0000000
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-versatile/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/vic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- beq 1003f
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
-
-@ clz \irqnr, \irqstat
-@1003: /* EQ will be set if we reach MAXIRQNUM */
- .endm
-
diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h
deleted file mode 100644
index edc0659..0000000
--- a/include/asm-arm/arch-versatile/hardware.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/hardware.h
- *
- * This file contains the hardware definitions of the Versatile boards.
- *
- * Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
-
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000
-
-#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
-/* CIK guesswork */
-#define PCIBIOS_MIN_IO 0x44000000
-#define PCIBIOS_MIN_MEM 0x50000000
-
-#define pcibios_assign_all_busses() 1
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h
deleted file mode 100644
index c4d0194..0000000
--- a/include/asm-arm/arch-versatile/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/io.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
deleted file mode 100644
index f7263b9..0000000
--- a/include/asm-arm/arch-versatile/irqs.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/irqs.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <asm/arch/platform.h>
-
-/*
- * IRQ interrupts definitions are the same as the INT definitions
- * held within platform.h
- */
-#define IRQ_VIC_START 0
-#define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx (IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1 (IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3 (IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0 (IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1 (IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2 (IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3 (IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT (IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT (IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0 (IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1 (IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2 (IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT (IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT (IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT (IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT (IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT (IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT (IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21 (IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22 (IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23 (IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24 (IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25 (IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26 (IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27 (IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28 (IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29 (IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30 (IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END (IRQ_VIC_START + 31)
-
-#define IRQMASK_WDOGINT INTMASK_WDOGINT
-#define IRQMASK_SOFTINT INTMASK_SOFTINT
-#define IRQMASK_COMMRx INTMASK_COMMRx
-#define IRQMASK_COMMTx INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3
-#define IRQMASK_RTCINT INTMASK_RTCINT
-#define IRQMASK_SSPINT INTMASK_SSPINT
-#define IRQMASK_UARTINT0 INTMASK_UARTINT0
-#define IRQMASK_UARTINT1 INTMASK_UARTINT1
-#define IRQMASK_UARTINT2 INTMASK_UARTINT2
-#define IRQMASK_SCIINT INTMASK_SCIINT
-#define IRQMASK_CLCDINT INTMASK_CLCDINT
-#define IRQMASK_DMAINT INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT INTMASK_MBXINT
-#define IRQMASK_GNDINT INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21 INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22 INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23 INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24 INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25 INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26 INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27 INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28 INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29 INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30 INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31 INTMASK_VICSOURCE31
-
-/*
- * FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT INT_WDOGINT
-#define FIQ_SOFTINT INT_SOFTINT
-#define FIQ_COMMRx INT_COMMRx
-#define FIQ_COMMTx INT_COMMTx
-#define FIQ_TIMERINT0_1 INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3 INT_TIMERINT2_3
-#define FIQ_GPIOINT0 INT_GPIOINT0
-#define FIQ_GPIOINT1 INT_GPIOINT1
-#define FIQ_GPIOINT2 INT_GPIOINT2
-#define FIQ_GPIOINT3 INT_GPIOINT3
-#define FIQ_RTCINT INT_RTCINT
-#define FIQ_SSPINT INT_SSPINT
-#define FIQ_UARTINT0 INT_UARTINT0
-#define FIQ_UARTINT1 INT_UARTINT1
-#define FIQ_UARTINT2 INT_UARTINT2
-#define FIQ_SCIINT INT_SCIINT
-#define FIQ_CLCDINT INT_CLCDINT
-#define FIQ_DMAINT INT_DMAINT
-#define FIQ_PWRFAILINT INT_PWRFAILINT
-#define FIQ_MBXINT INT_MBXINT
-#define FIQ_GNDINT INT_GNDINT
-#define FIQ_VICSOURCE21 INT_VICSOURCE21
-#define FIQ_VICSOURCE22 INT_VICSOURCE22
-#define FIQ_VICSOURCE23 INT_VICSOURCE23
-#define FIQ_VICSOURCE24 INT_VICSOURCE24
-#define FIQ_VICSOURCE25 INT_VICSOURCE25
-#define FIQ_VICSOURCE26 INT_VICSOURCE26
-#define FIQ_VICSOURCE27 INT_VICSOURCE27
-#define FIQ_VICSOURCE28 INT_VICSOURCE28
-#define FIQ_VICSOURCE29 INT_VICSOURCE29
-#define FIQ_VICSOURCE30 INT_VICSOURCE30
-#define FIQ_VICSOURCE31 INT_VICSOURCE31
-
-
-#define FIQMASK_WDOGINT INTMASK_WDOGINT
-#define FIQMASK_SOFTINT INTMASK_SOFTINT
-#define FIQMASK_COMMRx INTMASK_COMMRx
-#define FIQMASK_COMMTx INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0 INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1 INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2 INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3 INTMASK_GPIOINT3
-#define FIQMASK_RTCINT INTMASK_RTCINT
-#define FIQMASK_SSPINT INTMASK_SSPINT
-#define FIQMASK_UARTINT0 INTMASK_UARTINT0
-#define FIQMASK_UARTINT1 INTMASK_UARTINT1
-#define FIQMASK_UARTINT2 INTMASK_UARTINT2
-#define FIQMASK_SCIINT INTMASK_SCIINT
-#define FIQMASK_CLCDINT INTMASK_CLCDINT
-#define FIQMASK_DMAINT INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT INTMASK_MBXINT
-#define FIQMASK_GNDINT INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21 INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22 INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23 INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24 INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25 INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26 INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27 INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28 INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29 INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30 INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31 INTMASK_VICSOURCE31
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START 32
-#define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1 (IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3 (IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3 (IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD (IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH (IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD (IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC (IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A (IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A (IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI (IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH (IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB (IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0 (IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END 63
-
-#define SIC_IRQMASK_MMCI0B SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0 SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1 SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3 SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3 SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0 SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1 SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2 SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3 SIC_INTMASK_PCI3
-
-#define NR_IRQS 64
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
deleted file mode 100644
index a937097..0000000
--- a/include/asm-arm/arch-versatile/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
deleted file mode 100644
index 2af9d7c..0000000
--- a/include/asm-arm/arch-versatile/platform.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/platform.h
- *
- * Copyright (c) ARM Limited 2003. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __address_h
-#define __address_h 1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI 0x30000000
-#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */
-#define VERSATILE_BOOT_ROM_SIZE SZ_64M
-
-#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE SZ_2M
-
-#define VERSATILE_FLASH_BASE 0x34000000
-#define VERSATILE_FLASH_SIZE SZ_64M
-
-/*
- * SDRAM
- */
-#define VERSATILE_SDRAM_BASE 0x00000000
-
-/*
- * Logic expansion modules
- *
- */
-
-
-/* ------------------------------------------------------------------------
- * Versatile Registers
- * ------------------------------------------------------------------------
- *
- */
-#define VERSATILE_SYS_ID_OFFSET 0x00
-#define VERSATILE_SYS_SW_OFFSET 0x04
-#define VERSATILE_SYS_LED_OFFSET 0x08
-#define VERSATILE_SYS_OSC0_OFFSET 0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET 0x10
-#define VERSATILE_SYS_OSC2_OFFSET 0x14
-#define VERSATILE_SYS_OSC3_OFFSET 0x18
-#define VERSATILE_SYS_OSC4_OFFSET 0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET 0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET 0x20
-#define VERSATILE_SYS_100HZ_OFFSET 0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET 0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET 0x40
-#define VERSATILE_SYS_PCICTL_OFFSET 0x44
-#define VERSATILE_SYS_MCI_OFFSET 0x48
-#define VERSATILE_SYS_FLASH_OFFSET 0x4C
-#define VERSATILE_SYS_CLCD_OFFSET 0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET 0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET 0x58
-#define VERSATILE_SYS_24MHz_OFFSET 0x5C
-#define VERSATILE_SYS_MISC_OFFSET 0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90
-
-#define VERSATILE_SYS_BASE 0x10000000
-#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/*
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04
-#define VERSATILE_SYS_CTRL_RESET_POR 0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC 0x06
-
-#define VERSATILE_SYS_CTRL_LED (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- * Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/*
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4 = build value
- * 3:0 = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
- * SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- * - used to acknowledge and control MMCI and UART interrupts
- */
-#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
-#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */
- /* write 1 to acknowledge and clear */
-#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
-#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE 0x10001000 /* PCI core control */
-#define VERSATILE_I2C_BASE 0x10002000 /* I2C control */
-#define VERSATILE_SIC_BASE 0x10003000 /* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE 0x10004000 /* Audio */
-#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
-#define VERSATILE_KMI0_BASE 0x10006000 /* KMI interface */
-#define VERSATILE_KMI1_BASE 0x10007000 /* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE 0x10008000 /* Character LCD */
-#define VERSATILE_UART3_BASE 0x10009000 /* UART 3 */
-#define VERSATILE_SCI1_BASE 0x1000A000
-#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
- /* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE 0x10010000 /* Ethernet */
-#define VERSATILE_USB_BASE 0x10020000 /* USB */
- /* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE 0x10100000 /* SMC */
-#define VERSATILE_MPMC_BASE 0x10110000 /* MPMC */
-#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
-#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */
-#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */
- /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */
-#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
-#define VERSATILE_WATCHDOG_BASE 0x101E1000 /* Watchdog */
-#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */
-#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */
- /* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE 0x101F0000 /* Smart card controller */
-#define VERSATILE_UART0_BASE 0x101F1000 /* Uart 0 */
-#define VERSATILE_UART1_BASE 0x101F2000 /* Uart 1 */
-#define VERSATILE_UART2_BASE 0x101F3000 /* Uart 2 */
-#define VERSATILE_SSP_BASE 0x101F4000 /* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */
-#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
-#define VERSATILE_MBX_BASE 0x40000000 /* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE 0x42000000
-#define VERSATILE_PCI_MEM_BASE0 0x44000000
-#define VERSATILE_PCI_MEM_BASE1 0x50000000
-#define VERSATILE_PCI_MEM_BASE2 0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE 0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE 0x2C000000
-#define VERSATILE_DOC_SIZE (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE 512
-#define VERSATILE_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES 32
-#define START_PAGE 0x80
-
-/*
- * LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0 (1 << 0)
-#define VERSATILE_SYS_LED1 (1 << 1)
-#define VERSATILE_SYS_LED2 (1 << 2)
-#define VERSATILE_SYS_LED3 (1 << 3)
-#define VERSATILE_SYS_LED4 (1 << 4)
-#define VERSATILE_SYS_LED5 (1 << 5)
-#define VERSATILE_SYS_LED6 (1 << 6)
-#define VERSATILE_SYS_LED7 (1 << 7)
-
-#define ALL_LEDS 0xFF
-
-#define LED_BANK VERSATILE_SYS_LED
-
-/*
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */
-#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */
-#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- * Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- *
- * Offsets from interrupt controller base
- *
- * System Controller interrupt controller base is
- *
- * VERSATILE_IC_BASE
- *
- * Core Module interrupt controller base is
- *
- * VERSATILE_SYS_IC
- *
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS 0
-#define SIC_IRQ_RAW_STATUS 0x04
-#define SIC_IRQ_ENABLE 0x08
-#define SIC_IRQ_ENABLE_SET 0x08
-#define SIC_IRQ_ENABLE_CLEAR 0x0C
-#define SIC_INT_SOFT_SET 0x10
-#define SIC_INT_SOFT_CLEAR 0x14
-#define SIC_INT_PIC_ENABLE 0x20 /* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES 0x20 /* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC 0x24 /* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- * Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT 0 /* Watchdog timer */
-#define INT_SOFTINT 1 /* Software interrupt */
-#define INT_COMMRx 2 /* Debug Comm Rx interrupt */
-#define INT_COMMTx 3 /* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */
-#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */
-#define INT_GPIOINT0 6 /* GPIO 0 */
-#define INT_GPIOINT1 7 /* GPIO 1 */
-#define INT_GPIOINT2 8 /* GPIO 2 */
-#define INT_GPIOINT3 9 /* GPIO 3 */
-#define INT_RTCINT 10 /* Real Time Clock */
-#define INT_SSPINT 11 /* Synchronous Serial Port */
-#define INT_UARTINT0 12 /* UART 0 on development chip */
-#define INT_UARTINT1 13 /* UART 1 on development chip */
-#define INT_UARTINT2 14 /* UART 2 on development chip */
-#define INT_SCIINT 15 /* Smart Card Interface */
-#define INT_CLCDINT 16 /* CLCD controller */
-#define INT_DMAINT 17 /* DMA controller */
-#define INT_PWRFAILINT 18 /* Power failure */
-#define INT_MBXINT 19 /* Graphics processor */
-#define INT_GNDINT 20 /* Reserved */
- /* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21 21 /* Disk on Chip */
-#define INT_VICSOURCE22 22 /* MCI0A */
-#define INT_VICSOURCE23 23 /* MCI1A */
-#define INT_VICSOURCE24 24 /* AACI */
-#define INT_VICSOURCE25 25 /* Ethernet */
-#define INT_VICSOURCE26 26 /* USB */
-#define INT_VICSOURCE27 27 /* PCI 0 */
-#define INT_VICSOURCE28 28 /* PCI 1 */
-#define INT_VICSOURCE29 29 /* PCI 2 */
-#define INT_VICSOURCE30 30 /* PCI 3 */
-#define INT_VICSOURCE31 31 /* SIC source */
-
-/*
- * Interrupt bit positions
- *
- */
-#define INTMASK_WDOGINT (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT (1 << INT_SOFTINT)
-#define INTMASK_COMMRx (1 << INT_COMMRx)
-#define INTMASK_COMMTx (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3 (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT (1 << INT_RTCINT)
-#define INTMASK_SSPINT (1 << INT_SSPINT)
-#define INTMASK_UARTINT0 (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1 (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2 (1 << INT_UARTINT2)
-#define INTMASK_SCIINT (1 << INT_SCIINT)
-#define INTMASK_CLCDINT (1 << INT_CLCDINT)
-#define INTMASK_DMAINT (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT (1 << INT_MBXINT)
-#define INTMASK_GNDINT (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21 (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22 (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23 (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24 (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25 (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26 (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27 (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28 (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29 (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30 (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31 (1 << INT_VICSOURCE31)
-
-
-#define VERSATILE_SC_VALID_INT 0x003FFFFF
-
-#define MAXIRQNUM 31
-#define MAXFIQNUM 31
-#define MAXSWINUM 31
-
-/* ------------------------------------------------------------------------
- * Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B 1 /* Multimedia Card 0B */
-#define SIC_INT_MMCI1B 2 /* Multimedia Card 1B */
-#define SIC_INT_KMI0 3 /* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1 4 /* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3 5 /* Smart Card interface */
-#define SIC_INT_UART3 6 /* UART 3 empty or data available */
-#define SIC_INT_CLCD 7 /* Character LCD */
-#define SIC_INT_TOUCH 8 /* Touchscreen */
-#define SIC_INT_KEYPAD 9 /* Key pressed on display keypad */
- /* 10:20 - reserved */
-#define SIC_INT_DoC 21 /* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A 22 /* MMC 0A */
-#define SIC_INT_MMCI1A 23 /* MMC 1A */
-#define SIC_INT_AACI 24 /* Audio Codec */
-#define SIC_INT_ETH 25 /* Ethernet controller */
-#define SIC_INT_USB 26 /* USB controller */
-#define SIC_INT_PCI0 27
-#define SIC_INT_PCI1 28
-#define SIC_INT_PCI2 29
-#define SIC_INT_PCI3 30
-
-
-#define SIC_INTMASK_MMCI0B (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0 (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1 (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3 (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3 (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0 (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3)
-/*
- * Application Flash
- *
- */
-#define FLASH_BASE VERSATILE_FLASH_BASE
-#define FLASH_SIZE VERSATILE_FLASH_SIZE
-#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE SZ_128K
-
-/*
- * Boot Flash
- *
- */
-#define EPROM_BASE VERSATILE_BOOT_ROM_HI
-#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE
-#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
-
-/*
- * Clean base - dummy
- *
- */
-#define CLEAN_BASE EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK 0
-#define VERSATILE_TIMCLK 1
-
-#define VERSATILE_TIMER1_EnSel 15
-#define VERSATILE_TIMER2_EnSel 17
-#define VERSATILE_TIMER3_EnSel 19
-#define VERSATILE_TIMER4_EnSel 21
-
-
-#define MAX_TIMER 2
-#define MAX_PERIOD 699050
-#define TICKS_PER_uSEC 1
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-#define VERSATILE_CSR_BASE 0x10000000
-#define VERSATILE_CSR_SIZE 0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
-
-/* END */
diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h
deleted file mode 100644
index 3ea4e07..0000000
--- a/include/asm-arm/arch-versatile/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
- u32 val;
-
- val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
- val |= 0x105;
-
- __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
- __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
- __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
-#endif
diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h
deleted file mode 100644
index 38fd04f..0000000
--- a/include/asm-arm/arch-versatile/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/timex.h
- *
- * Versatile architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h
deleted file mode 100644
index 7215133..0000000
--- a/include/asm-arm/arch-versatile/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR (*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR (*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR (*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h
deleted file mode 100644
index ac780df..0000000
--- a/include/asm-arm/arch-versatile/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index d08a1f2..5106aca 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/iic.h
+/* arch/arm/mach-s3c2410/include/mach/iic.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
index ad6bbe9..f4dcd14 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/include/asm-arm/plat-s3c/nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/nand.h
+/* arch/arm/mach-s3c2410/include/mach/nand.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
index b004dee..c3878f7 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/include/asm-arm/plat-s3c/regs-ac97.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
*
* Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
index c7f2319..4323ccc 100644
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ b/include/asm-arm/plat-s3c/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
*
* Copyright (c) 2004 Shannon Holland <holland@loser.net>
*
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
index 2ae2952..2f7c17d 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/include/asm-arm/plat-s3c/regs-iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
*
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index d742205..09f0b55 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
*
* Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
index 93b03c4..d5837cf 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/include/asm-arm/plat-s3c/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
index 923e114..a0daa64 100644
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ b/include/asm-arm/plat-s3c/regs-serial.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
*
* From linux/include/asm-arm/hardware/serial_s3c2410.h
*
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index b5bc692..b4366ea 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
index 56c4193b..1229f07 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/include/asm-arm/plat-s3c/regs-watchdog.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h
index eaf7791..a6f1d5d 100644
--- a/include/asm-arm/plat-s3c24xx/regs-iis.h
+++ b/include/asm-arm/plat-s3c24xx/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index ea565b0..2b35479 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
*
* Copyright (c) 2004 Fetron GmbH
*
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
index e1e9805..f0dd4a4 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/include/asm-arm/plat-s3c24xx/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
*
* Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
*
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
index b8aa6cb..546bb40 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/include/asm-arm/plat-s3c24xx/udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/udc.h
+/* arch/arm/mach-s3c2410/include/mach/udc.h
*
* Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
*
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 158f7b5..199cca3 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
#include <asm/irq.h>
#include <linux/mutex.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
index 9a104e2..381094a 100644
--- a/sound/arm/pxa2xx-pcm.c
+++ b/sound/arm/pxa2xx-pcm.c
@@ -21,8 +21,8 @@
#include <sound/pcm_params.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#include "pxa2xx-pcm.h"
diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c
index 40c213e..b9c51bf 100644
--- a/sound/arm/sa11xx-uda1341.c
+++ b/sound/arm/sa11xx-uda1341.c
@@ -71,8 +71,8 @@
#include <linux/pm.h>
#endif
-#include <asm/arch/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
#include <asm/mach-types.h>
#include <asm/dma.h>
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index 41cd4f2..725fef0 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/hardware/iomd.h>
diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S
index d2cb210..bed3492 100644
--- a/sound/oss/vidc_fill.S
+++ b/sound/oss/vidc_fill.S
@@ -11,7 +11,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
.text
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index d84c497..c47842f 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -47,7 +47,7 @@
#include "waveartist.h"
#ifdef CONFIG_ARM
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#endif
diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c
index fee5f8e..3f32621 100644
--- a/sound/soc/at32/playpaq_wm8510.c
+++ b/sound/soc/at32/playpaq_wm8510.c
@@ -36,8 +36,8 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
#include "../codecs/wm8510.h"
#include "at32-pcm.h"
diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c
index d47492b..7ab48bd 100644
--- a/sound/soc/at91/at91-pcm.c
+++ b/sound/soc/at91/at91-pcm.c
@@ -28,8 +28,8 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ssc.h>
#include "at91-pcm.h"
diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h
index 58d0f00..e5aada2 100644
--- a/sound/soc/at91/at91-pcm.h
+++ b/sound/soc/at91/at91-pcm.h
@@ -19,7 +19,7 @@
#ifndef _AT91_PCM_H
#define _AT91_PCM_H
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
struct at91_ssc_periph {
void __iomem *base;
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index 090e607..5d44515 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -28,9 +28,9 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_ssc.h>
#include "at91-pcm.h"
#include "at91-ssc.h"
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index d61a453..b081e83 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -33,8 +33,8 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
#include "../codecs/wm8731.h"
#include "at91-pcm.h"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 0722eeb..65fdbd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,7 @@
#include <sound/soc-dapm.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "../codecs/tlv320aic3x.h"
#include "davinci-pcm.h"
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 02cec968..7694621 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,9 +29,9 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/gpio.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 00b0c9d..35310e1 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -30,9 +30,9 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/control.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/control.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e092f3d..690bfea 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -27,7 +27,7 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include "omap-pcm.h"
static const struct snd_pcm_hardware omap_pcm_hardware = {
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index c029446..0a53f72 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,10 +25,10 @@
#include <asm/mach-types.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/corgi.h>
+#include <mach/audio.h>
#include "../codecs/wm8731.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 06e8afb..6781c5b 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,9 +21,9 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 02dcac3..d9c3f7b 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -30,9 +30,9 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index d968cf7..a4697f7 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,10 +26,10 @@
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/poodle.h>
+#include <mach/audio.h>
#include "../codecs/wm8731.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index b45a4f1..d94a495 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
#include <asm/irq.h>
#include <linux/mutex.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index f69870f..8548818 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -21,10 +21,10 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 77708f8..4345f38 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -22,9 +22,9 @@
#include <sound/soc.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 6438579..eefc25b 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,10 +26,10 @@
#include <asm/mach-types.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 22971a0..2baaa75 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -29,10 +29,10 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/tosa.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
#include "../codecs/wm9712.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 47bf9a0..8089f8e 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -25,12 +25,12 @@
#include <sound/tlv.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
#include <linux/io.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi-gpio.h>
#include <asm/plat-s3c24xx/regs-iis.h>
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 59c3d53..ded7d99 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -28,16 +28,16 @@
#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/dma.h>
+#include <mach/regs-gpio.h>
+#include <mach/audio.h>
+#include <mach/dma.h>
#include "s3c24xx-pcm.h"
#include "s3c2412-i2s.h"
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index a371673..19c5c3c 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -27,13 +27,13 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include "s3c24xx-pcm.h"
#include "s3c24xx-ac97.h"
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index ff614d6..ba4476b 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -27,12 +27,12 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
#include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
#include <asm/plat-s3c24xx/regs-iis.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index fadd33e..e13e614 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -27,9 +27,9 @@
#include <sound/soc.h>
#include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/audio.h>
#include "s3c24xx-pcm.h"