| /* |
| * Cryptographic API for the NX-842 hardware compression. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Copyright (C) IBM Corporation, 2011-2015 |
| * |
| * Designer of the Power data compression engine: |
| * Bulent Abali <abali@us.ibm.com> |
| * |
| * Original Authors: Robert Jennings <rcj@linux.vnet.ibm.com> |
| * Seth Jennings <sjenning@linux.vnet.ibm.com> |
| * |
| * Rewrite: Dan Streetman <ddstreet@ieee.org> |
| * |
| * This is an interface to the NX-842 compression hardware in PowerPC |
| * processors. Most of the complexity of this drvier is due to the fact that |
| * the NX-842 compression hardware requires the input and output data buffers |
| * to be specifically aligned, to be a specific multiple in length, and within |
| * specific minimum and maximum lengths. Those restrictions, provided by the |
| * nx-842 driver via nx842_constraints, mean this driver must use bounce |
| * buffers and headers to correct misaligned in or out buffers, and to split |
| * input buffers that are too large. |
| * |
| * This driver will fall back to software decompression if the hardware |
| * decompression fails, so this driver's decompression should never fail as |
| * long as the provided compressed buffer is valid. Any compressed buffer |
| * created by this driver will have a header (except ones where the input |
| * perfectly matches the constraints); so users of this driver cannot simply |
| * pass a compressed buffer created by this driver over to the 842 software |
| * decompression library. Instead, users must use this driver to decompress; |
| * if the hardware fails or is unavailable, the compressed buffer will be |
| * parsed and the header removed, and the raw 842 buffer(s) passed to the 842 |
| * software decompression library. |
| * |
| * This does not fall back to software compression, however, since the caller |
| * of this function is specifically requesting hardware compression; if the |
| * hardware compression fails, the caller can fall back to software |
| * compression, and the raw 842 compressed buffer that the software compressor |
| * creates can be passed to this driver for hardware decompression; any |
| * buffer without our specific header magic is assumed to be a raw 842 buffer |
| * and passed directly to the hardware. Note that the software compression |
| * library will produce a compressed buffer that is incompatible with the |
| * hardware decompressor if the original input buffer length is not a multiple |
| * of 8; if such a compressed buffer is passed to this driver for |
| * decompression, the hardware will reject it and this driver will then pass |
| * it over to the software library for decompression. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/vmalloc.h> |
| #include <linux/sw842.h> |
| #include <linux/spinlock.h> |
| |
| #include "nx-842.h" |
| |
| /* The first 5 bits of this magic are 0x1f, which is an invalid 842 5-bit |
| * template (see lib/842/842.h), so this magic number will never appear at |
| * the start of a raw 842 compressed buffer. That is important, as any buffer |
| * passed to us without this magic is assumed to be a raw 842 compressed |
| * buffer, and passed directly to the hardware to decompress. |
| */ |
| #define NX842_CRYPTO_MAGIC (0xf842) |
| #define NX842_CRYPTO_HEADER_SIZE(g) \ |
| (sizeof(struct nx842_crypto_header) + \ |
| sizeof(struct nx842_crypto_header_group) * (g)) |
| #define NX842_CRYPTO_HEADER_MAX_SIZE \ |
| NX842_CRYPTO_HEADER_SIZE(NX842_CRYPTO_GROUP_MAX) |
| |
| /* bounce buffer size */ |
| #define BOUNCE_BUFFER_ORDER (2) |
| #define BOUNCE_BUFFER_SIZE \ |
| ((unsigned int)(PAGE_SIZE << BOUNCE_BUFFER_ORDER)) |
| |
| /* try longer on comp because we can fallback to sw decomp if hw is busy */ |
| #define COMP_BUSY_TIMEOUT (250) /* ms */ |
| #define DECOMP_BUSY_TIMEOUT (50) /* ms */ |
| |
| struct nx842_crypto_param { |
| u8 *in; |
| unsigned int iremain; |
| u8 *out; |
| unsigned int oremain; |
| unsigned int ototal; |
| }; |
| |
| static int update_param(struct nx842_crypto_param *p, |
| unsigned int slen, unsigned int dlen) |
| { |
| if (p->iremain < slen) |
| return -EOVERFLOW; |
| if (p->oremain < dlen) |
| return -ENOSPC; |
| |
| p->in += slen; |
| p->iremain -= slen; |
| p->out += dlen; |
| p->oremain -= dlen; |
| p->ototal += dlen; |
| |
| return 0; |
| } |
| |
| int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver) |
| { |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| spin_lock_init(&ctx->lock); |
| ctx->driver = driver; |
| ctx->wmem = kmalloc(driver->workmem_size, GFP_KERNEL); |
| ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); |
| ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); |
| if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) { |
| kfree(ctx->wmem); |
| free_page((unsigned long)ctx->sbounce); |
| free_page((unsigned long)ctx->dbounce); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(nx842_crypto_init); |
| |
| void nx842_crypto_exit(struct crypto_tfm *tfm) |
| { |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| kfree(ctx->wmem); |
| free_page((unsigned long)ctx->sbounce); |
| free_page((unsigned long)ctx->dbounce); |
| } |
| EXPORT_SYMBOL_GPL(nx842_crypto_exit); |
| |
| static void check_constraints(struct nx842_constraints *c) |
| { |
| /* limit maximum, to always have enough bounce buffer to decompress */ |
| if (c->maximum > BOUNCE_BUFFER_SIZE) |
| c->maximum = BOUNCE_BUFFER_SIZE; |
| } |
| |
| static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf) |
| { |
| int s = NX842_CRYPTO_HEADER_SIZE(hdr->groups); |
| |
| /* compress should have added space for header */ |
| if (s > be16_to_cpu(hdr->group[0].padding)) { |
| pr_err("Internal error: no space for header\n"); |
| return -EINVAL; |
| } |
| |
| memcpy(buf, hdr, s); |
| |
| print_hex_dump_debug("header ", DUMP_PREFIX_OFFSET, 16, 1, buf, s, 0); |
| |
| return 0; |
| } |
| |
| static int compress(struct nx842_crypto_ctx *ctx, |
| struct nx842_crypto_param *p, |
| struct nx842_crypto_header_group *g, |
| struct nx842_constraints *c, |
| u16 *ignore, |
| unsigned int hdrsize) |
| { |
| unsigned int slen = p->iremain, dlen = p->oremain, tmplen; |
| unsigned int adj_slen = slen; |
| u8 *src = p->in, *dst = p->out; |
| int ret, dskip = 0; |
| ktime_t timeout; |
| |
| if (p->iremain == 0) |
| return -EOVERFLOW; |
| |
| if (p->oremain == 0 || hdrsize + c->minimum > dlen) |
| return -ENOSPC; |
| |
| if (slen % c->multiple) |
| adj_slen = round_up(slen, c->multiple); |
| if (slen < c->minimum) |
| adj_slen = c->minimum; |
| if (slen > c->maximum) |
| adj_slen = slen = c->maximum; |
| if (adj_slen > slen || (u64)src % c->alignment) { |
| adj_slen = min(adj_slen, BOUNCE_BUFFER_SIZE); |
| slen = min(slen, BOUNCE_BUFFER_SIZE); |
| if (adj_slen > slen) |
| memset(ctx->sbounce + slen, 0, adj_slen - slen); |
| memcpy(ctx->sbounce, src, slen); |
| src = ctx->sbounce; |
| slen = adj_slen; |
| pr_debug("using comp sbounce buffer, len %x\n", slen); |
| } |
| |
| dst += hdrsize; |
| dlen -= hdrsize; |
| |
| if ((u64)dst % c->alignment) { |
| dskip = (int)(PTR_ALIGN(dst, c->alignment) - dst); |
| dst += dskip; |
| dlen -= dskip; |
| } |
| if (dlen % c->multiple) |
| dlen = round_down(dlen, c->multiple); |
| if (dlen < c->minimum) { |
| nospc: |
| dst = ctx->dbounce; |
| dlen = min(p->oremain, BOUNCE_BUFFER_SIZE); |
| dlen = round_down(dlen, c->multiple); |
| dskip = 0; |
| pr_debug("using comp dbounce buffer, len %x\n", dlen); |
| } |
| if (dlen > c->maximum) |
| dlen = c->maximum; |
| |
| tmplen = dlen; |
| timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT); |
| do { |
| dlen = tmplen; /* reset dlen, if we're retrying */ |
| ret = ctx->driver->compress(src, slen, dst, &dlen, ctx->wmem); |
| /* possibly we should reduce the slen here, instead of |
| * retrying with the dbounce buffer? |
| */ |
| if (ret == -ENOSPC && dst != ctx->dbounce) |
| goto nospc; |
| } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); |
| if (ret) |
| return ret; |
| |
| dskip += hdrsize; |
| |
| if (dst == ctx->dbounce) |
| memcpy(p->out + dskip, dst, dlen); |
| |
| g->padding = cpu_to_be16(dskip); |
| g->compressed_length = cpu_to_be32(dlen); |
| g->uncompressed_length = cpu_to_be32(slen); |
| |
| if (p->iremain < slen) { |
| *ignore = slen - p->iremain; |
| slen = p->iremain; |
| } |
| |
| pr_debug("compress slen %x ignore %x dlen %x padding %x\n", |
| slen, *ignore, dlen, dskip); |
| |
| return update_param(p, slen, dskip + dlen); |
| } |
| |
| int nx842_crypto_compress(struct crypto_tfm *tfm, |
| const u8 *src, unsigned int slen, |
| u8 *dst, unsigned int *dlen) |
| { |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); |
| struct nx842_crypto_header *hdr = &ctx->header; |
| struct nx842_crypto_param p; |
| struct nx842_constraints c = *ctx->driver->constraints; |
| unsigned int groups, hdrsize, h; |
| int ret, n; |
| bool add_header; |
| u16 ignore = 0; |
| |
| check_constraints(&c); |
| |
| p.in = (u8 *)src; |
| p.iremain = slen; |
| p.out = dst; |
| p.oremain = *dlen; |
| p.ototal = 0; |
| |
| *dlen = 0; |
| |
| groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX, |
| DIV_ROUND_UP(p.iremain, c.maximum)); |
| hdrsize = NX842_CRYPTO_HEADER_SIZE(groups); |
| |
| spin_lock_bh(&ctx->lock); |
| |
| /* skip adding header if the buffers meet all constraints */ |
| add_header = (p.iremain % c.multiple || |
| p.iremain < c.minimum || |
| p.iremain > c.maximum || |
| (u64)p.in % c.alignment || |
| p.oremain % c.multiple || |
| p.oremain < c.minimum || |
| p.oremain > c.maximum || |
| (u64)p.out % c.alignment); |
| |
| hdr->magic = cpu_to_be16(NX842_CRYPTO_MAGIC); |
| hdr->groups = 0; |
| hdr->ignore = 0; |
| |
| while (p.iremain > 0) { |
| n = hdr->groups++; |
| ret = -ENOSPC; |
| if (hdr->groups > NX842_CRYPTO_GROUP_MAX) |
| goto unlock; |
| |
| /* header goes before first group */ |
| h = !n && add_header ? hdrsize : 0; |
| |
| if (ignore) |
| pr_warn("interal error, ignore is set %x\n", ignore); |
| |
| ret = compress(ctx, &p, &hdr->group[n], &c, &ignore, h); |
| if (ret) |
| goto unlock; |
| } |
| |
| if (!add_header && hdr->groups > 1) { |
| pr_err("Internal error: No header but multiple groups\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| /* ignore indicates the input stream needed to be padded */ |
| hdr->ignore = cpu_to_be16(ignore); |
| if (ignore) |
| pr_debug("marked %d bytes as ignore\n", ignore); |
| |
| if (add_header) |
| ret = nx842_crypto_add_header(hdr, dst); |
| if (ret) |
| goto unlock; |
| |
| *dlen = p.ototal; |
| |
| pr_debug("compress total slen %x dlen %x\n", slen, *dlen); |
| |
| unlock: |
| spin_unlock_bh(&ctx->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(nx842_crypto_compress); |
| |
| static int decompress(struct nx842_crypto_ctx *ctx, |
| struct nx842_crypto_param *p, |
| struct nx842_crypto_header_group *g, |
| struct nx842_constraints *c, |
| u16 ignore) |
| { |
| unsigned int slen = be32_to_cpu(g->compressed_length); |
| unsigned int required_len = be32_to_cpu(g->uncompressed_length); |
| unsigned int dlen = p->oremain, tmplen; |
| unsigned int adj_slen = slen; |
| u8 *src = p->in, *dst = p->out; |
| u16 padding = be16_to_cpu(g->padding); |
| int ret, spadding = 0, dpadding = 0; |
| ktime_t timeout; |
| |
| if (!slen || !required_len) |
| return -EINVAL; |
| |
| if (p->iremain <= 0 || padding + slen > p->iremain) |
| return -EOVERFLOW; |
| |
| if (p->oremain <= 0 || required_len - ignore > p->oremain) |
| return -ENOSPC; |
| |
| src += padding; |
| |
| if (slen % c->multiple) |
| adj_slen = round_up(slen, c->multiple); |
| if (slen < c->minimum) |
| adj_slen = c->minimum; |
| if (slen > c->maximum) |
| goto usesw; |
| if (slen < adj_slen || (u64)src % c->alignment) { |
| /* we can append padding bytes because the 842 format defines |
| * an "end" template (see lib/842/842_decompress.c) and will |
| * ignore any bytes following it. |
| */ |
| if (slen < adj_slen) |
| memset(ctx->sbounce + slen, 0, adj_slen - slen); |
| memcpy(ctx->sbounce, src, slen); |
| src = ctx->sbounce; |
| spadding = adj_slen - slen; |
| slen = adj_slen; |
| pr_debug("using decomp sbounce buffer, len %x\n", slen); |
| } |
| |
| if (dlen % c->multiple) |
| dlen = round_down(dlen, c->multiple); |
| if (dlen < required_len || (u64)dst % c->alignment) { |
| dst = ctx->dbounce; |
| dlen = min(required_len, BOUNCE_BUFFER_SIZE); |
| pr_debug("using decomp dbounce buffer, len %x\n", dlen); |
| } |
| if (dlen < c->minimum) |
| goto usesw; |
| if (dlen > c->maximum) |
| dlen = c->maximum; |
| |
| tmplen = dlen; |
| timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT); |
| do { |
| dlen = tmplen; /* reset dlen, if we're retrying */ |
| ret = ctx->driver->decompress(src, slen, dst, &dlen, ctx->wmem); |
| } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); |
| if (ret) { |
| usesw: |
| /* reset everything, sw doesn't have constraints */ |
| src = p->in + padding; |
| slen = be32_to_cpu(g->compressed_length); |
| spadding = 0; |
| dst = p->out; |
| dlen = p->oremain; |
| dpadding = 0; |
| if (dlen < required_len) { /* have ignore bytes */ |
| dst = ctx->dbounce; |
| dlen = BOUNCE_BUFFER_SIZE; |
| } |
| pr_info_ratelimited("using software 842 decompression\n"); |
| ret = sw842_decompress(src, slen, dst, &dlen); |
| } |
| if (ret) |
| return ret; |
| |
| slen -= spadding; |
| |
| dlen -= ignore; |
| if (ignore) |
| pr_debug("ignoring last %x bytes\n", ignore); |
| |
| if (dst == ctx->dbounce) |
| memcpy(p->out, dst, dlen); |
| |
| pr_debug("decompress slen %x padding %x dlen %x ignore %x\n", |
| slen, padding, dlen, ignore); |
| |
| return update_param(p, slen + padding, dlen); |
| } |
| |
| int nx842_crypto_decompress(struct crypto_tfm *tfm, |
| const u8 *src, unsigned int slen, |
| u8 *dst, unsigned int *dlen) |
| { |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); |
| struct nx842_crypto_header *hdr; |
| struct nx842_crypto_param p; |
| struct nx842_constraints c = *ctx->driver->constraints; |
| int n, ret, hdr_len; |
| u16 ignore = 0; |
| |
| check_constraints(&c); |
| |
| p.in = (u8 *)src; |
| p.iremain = slen; |
| p.out = dst; |
| p.oremain = *dlen; |
| p.ototal = 0; |
| |
| *dlen = 0; |
| |
| hdr = (struct nx842_crypto_header *)src; |
| |
| spin_lock_bh(&ctx->lock); |
| |
| /* If it doesn't start with our header magic number, assume it's a raw |
| * 842 compressed buffer and pass it directly to the hardware driver |
| */ |
| if (be16_to_cpu(hdr->magic) != NX842_CRYPTO_MAGIC) { |
| struct nx842_crypto_header_group g = { |
| .padding = 0, |
| .compressed_length = cpu_to_be32(p.iremain), |
| .uncompressed_length = cpu_to_be32(p.oremain), |
| }; |
| |
| ret = decompress(ctx, &p, &g, &c, 0); |
| if (ret) |
| goto unlock; |
| |
| goto success; |
| } |
| |
| if (!hdr->groups) { |
| pr_err("header has no groups\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| if (hdr->groups > NX842_CRYPTO_GROUP_MAX) { |
| pr_err("header has too many groups %x, max %x\n", |
| hdr->groups, NX842_CRYPTO_GROUP_MAX); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| hdr_len = NX842_CRYPTO_HEADER_SIZE(hdr->groups); |
| if (hdr_len > slen) { |
| ret = -EOVERFLOW; |
| goto unlock; |
| } |
| |
| memcpy(&ctx->header, src, hdr_len); |
| hdr = &ctx->header; |
| |
| for (n = 0; n < hdr->groups; n++) { |
| /* ignore applies to last group */ |
| if (n + 1 == hdr->groups) |
| ignore = be16_to_cpu(hdr->ignore); |
| |
| ret = decompress(ctx, &p, &hdr->group[n], &c, ignore); |
| if (ret) |
| goto unlock; |
| } |
| |
| success: |
| *dlen = p.ototal; |
| |
| pr_debug("decompress total slen %x dlen %x\n", slen, *dlen); |
| |
| ret = 0; |
| |
| unlock: |
| spin_unlock_bh(&ctx->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(nx842_crypto_decompress); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver"); |
| MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>"); |