diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index b994bcb..2a1519b 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -293,36 +293,13 @@
 
 These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
-we need to translate them to the Linux GPIO numbers.
+we need to translate them to the corresponding Linux GPIO descriptors.
 
-In a simple case of just getting the Linux GPIO number from device
-resources one can use acpi_get_gpio_by_index() helper function. It takes
-pointer to the device and index of the GpioIo/GpioInt descriptor in the
-device resources list. For example:
+There is a standard GPIO API for that and is documented in
+Documentation/gpio.txt.
 
-	int gpio_irq, gpio_power;
-	int ret;
-
-	gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL);
-	if (gpio_irq < 0)
-		/* handle error */
-
-	gpio_power = acpi_get_gpio_by_index(dev, 0, NULL);
-	if (gpio_power < 0)
-		/* handle error */
-
-	/* Now we can use the GPIO numbers */
-
-Other GpioIo parameters must be converted first by the driver to be
-suitable to the gpiolib before passing them.
-
-In case of GpioInt resource an additional call to gpio_to_irq() must be
-done before calling request_irq().
-
-Note that the above API is ACPI specific and not recommended for drivers
-that need to support non-ACPI systems. The recommended way is to use
-the descriptor based GPIO interfaces. The above example looks like this
-when converted to the GPIO desc:
+In the above example we can get the corresponding two GPIO descriptors with
+a code like this:
 
 	#include <linux/gpio/consumer.h>
 	...
@@ -339,4 +316,5 @@
 
 	/* Now we can use the GPIO descriptors */
 
-See also Documentation/gpio.txt.
+There are also devm_* versions of these functions which release the
+descriptors once the device is released.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 8b46c79..0ebd7e2 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -85,21 +85,10 @@
 Headers
 -------
 
-  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
+  See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
   is included by using #include <mach/regs-gpio.h>
 
-  The GPIO management functions are defined in the hardware
-  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
-  included by #include <mach/hardware.h>
-
-  A useful amount of documentation can be found in the hardware
-  header on how the GPIO functions (and others) work.
-
-  Whilst a number of these functions do make some checks on what
-  is passed to them, for speed of use, they may not always ensure
-  that the user supplied data to them is correct.
-
 
 PIN Numbers
 -----------
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
index daa3017..3ddc7cc 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
@@ -38,12 +38,38 @@
     removed.
 - spi-max-frequency = The maximum frequency this chip is able to handle
 
-Example I2C:
+Optional properties:
+- #interrupt-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as a interrupt controller.
+NOTE: The interrupt functionality is only supported for i2c versions of the
+chips. The spi chips can also do the interrupts, but this is not supported by
+the linux driver yet.
+
+Optional device specific properties:
+- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
+        with two interrupt outputs (these are the devices ending with 17 and
+        those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+        IO 8-15 are bank 2. These chips have two different interrupt outputs:
+        One for bank 1 and another for bank 2. If irq-mirror is set, both
+        interrupts are generated regardless of the bank that an input change
+        occured on. If it is not set, the interrupt are only generated for the
+        bank they belong to.
+        On devices with only one interrupt output this property is useless.
+
+Example I2C (with interrupt):
 gpiom1: gpio@20 {
         compatible = "microchip,mcp23017";
         gpio-controller;
         #gpio-cells = <2>;
         reg = <0x20>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells=<2>;
+        microchip,irq-mirror;
 };
 
 Example SPI:
diff --git a/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt
new file mode 100644
index 0000000..f8e8f18
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt
@@ -0,0 +1,19 @@
+MOXA ART GPIO Controller
+
+Required properties:
+
+- #gpio-cells : Should be 2, The first cell is the pin number,
+		the second cell is used to specify polarity:
+			0 = active high
+			1 = active low
+- compatible : Must be "moxa,moxart-gpio"
+- reg : Should contain registers location and length
+
+Example:
+
+	gpio: gpio@98700000 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		compatible = "moxa,moxart-gpio";
+		reg =	<0x98700000 0xC>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 8655df9..f61cef7 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -2,10 +2,11 @@
 
 Required Properties:
 
-  - compatible: should be one of the following.
+  - compatible: should contain one of the following.
     - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
     - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
     - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller.
     - "renesas,gpio-rcar": for generic R-Car GPIO controller.
 
   - reg: Base address and length of each memory resource used by the GPIO
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 0d03506..ba169fa 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -72,10 +72,11 @@
 
   - chip_label is the label of the gpiod_chip instance providing the GPIO
   - chip_hwnum is the hardware number of the GPIO within the chip
-  - dev_id is the identifier of the device that will make use of this GPIO. If
-	NULL, the GPIO will be available to all devices.
+  - dev_id is the identifier of the device that will make use of this GPIO. It
+	can be NULL, in which case it will be matched for calls to gpiod_get()
+	with a NULL device.
   - con_id is the name of the GPIO function from the device point of view. It
-	can be NULL.
+	can be NULL, in which case it will match any function.
   - idx is the index of the GPIO within the function.
   - flags is defined to specify the following properties:
 	* GPIOF_ACTIVE_LOW	- to configure the GPIO as active-low
@@ -86,18 +87,23 @@
 
 Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
 
-A lookup table can then be defined as follows:
+A lookup table can then be defined as follows, with an empty entry defining its
+end:
 
-	struct gpiod_lookup gpios_table[] = {
-	GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
-	};
+struct gpiod_lookup_table gpios_table = {
+	.dev_id = "foo.0",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio.0", 15, "led", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio.0", 16, "led", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio.0", 17, "led", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio.0", 1, "power", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 And the table can be added by the board code as follows:
 
-	gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+	gpiod_add_lookup_table(&gpios_table);
 
 The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 07c74a3..e42f77d 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -38,7 +38,11 @@
 					  const char *con_id, unsigned int idx)
 
 Both functions return either a valid GPIO descriptor, or an error code checkable
-with IS_ERR(). They will never return a NULL pointer.
+with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
+if and only if no GPIO has been assigned to the device/function/index triplet,
+other error codes are used for cases where a GPIO has been assigned but an error
+occured while trying to acquire it. This is useful to discriminate between mere
+errors and an absence of GPIO for optional GPIO parameters.
 
 Device-managed variants of these functions are also defined:
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9c909fc..b9df622 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -711,7 +711,6 @@
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select SAMSUNG_ATAGS
 	help
@@ -734,7 +733,6 @@
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS
@@ -1594,7 +1592,7 @@
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
deleted file mode 100644
index f5fda36..0000000
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-/*
- * Map IRQ number to GPIO line.
- */
-extern int irq_to_gpio(unsigned int irq);
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
deleted file mode 100644
index 0052e7a..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include "gpio-lpc32xx.h"
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e54f87e..34932e0 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -36,6 +36,7 @@
 #include <linux/clk.h>
 #include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
+#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -44,7 +45,6 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <mach/board.h>
-#include <mach/gpio-lpc32xx.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h
deleted file mode 100644
index 77e1b84..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 8f1d327..d876431 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -180,27 +180,6 @@
 	  Selected if there is an S3C2440 (or register compatible) serial
 	  low-level implementation needed
 
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
-	int
-	default 128 if S3C24XX_GPIO_EXTRA128
-	default 64 if S3C24XX_GPIO_EXTRA64
-	default 16 if ARCH_H1940
-	default 0
-
-config S3C24XX_GPIO_EXTRA64
-	bool
-	help
-	  Add an extra 64 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
-	bool
-	help
-	  Add an extra 128 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on ARM_S3C24XX_CPUFREQ
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 404444d..e9fbcc9 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -37,8 +37,8 @@
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 5b98bfd..b4d14b8 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -19,8 +19,10 @@
 #include <linux/gpio.h>
 #include <linux/rfkill.h>
 
+#include <plat/gpio-cfg.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include "h1940.h"
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
similarity index 85%
rename from arch/arm/mach-s3c24xx/include/mach/gpio.h
rename to arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
index 1459156..528fcdc 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
@@ -14,16 +14,8 @@
  * devices that need GPIO.
  */
 
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H __FILE__
-
-#ifdef CONFIG_CPU_S3C244X
-#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
-#else
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
-#endif
+#ifndef GPIO_SAMSUNG_S3C24XX_H
+#define GPIO_SAMSUNG_S3C24XX_H
 
 /*
  * GPIO sizes for various SoCs:
@@ -31,17 +23,17 @@
  *   2410 2412 2440 2443 2416
  *             2442
  *   ---- ---- ---- ---- ----
- * A  23   22   25   16   25
- * B  11   11   11   11   9
- * C  16   15   16   16   16
+ * A  23   22   25   16   27
+ * B  11   11   11   11   11
+ * C  16   16   16   16   16
  * D  16   16   16   16   16
  * E  16   16   16   16   16
  * F  8    8    8    8    8
  * G  16   16   16   16   8
- * H  11   11   9    15   15
+ * H  11   11   11   15   15
  * J  --   --   13   16   --
  * K  --   --   --   --   16
- * L  --   --   --   15   7
+ * L  --   --   --   15   14
  * M  --   --   --   2    2
  */
 
@@ -101,8 +93,6 @@
 #define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
 #define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
 
-#include <plat/gpio-cfg.h>
-
 #ifdef CONFIG_CPU_S3C244X
 #define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
 #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -111,4 +101,4 @@
 #define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif
 
-#endif /* __MACH_GPIO_H */
+#endif /* GPIO_SAMSUNG_S3C24XX_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index e27b5c9..284ea1f 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -52,6 +52,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index c1fb6c3..2a16f8f 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -35,6 +35,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 6dfeeb7..6beab67 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -36,6 +36,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 22d6ae9..981ba1e 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -48,6 +48,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 13d8d07..d9170e9 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -75,6 +75,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 952b6a0..de08321 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -54,6 +54,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 43c23e2..67cb8e9 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -38,6 +38,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/fb.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 4a18d49..1f15597 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -42,6 +42,7 @@
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/mmc-s3cmci.h>
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 2cb46c3..997684f 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -36,6 +36,7 @@
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 01f4354..575d28c 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -37,6 +37,7 @@
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index 45e7436..33afb91 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -20,6 +20,7 @@
 #include <linux/i2c/tps65010.h>
 
 #include <plat/cpu-freq.h>
+#include <mach/gpio-samsung.h>
 
 #define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
 
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 58d6fbe..f84f2a4 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -50,6 +50,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include "common.h"
 #include "osiris.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index f8feaea..b534b76 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -54,6 +54,7 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 034b7fe..0a5456c 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -51,6 +51,7 @@
 #include <mach/fb.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -58,6 +59,7 @@
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
+#include <plat/gpio-cfg.h>
 
 #include "common.h"
 #include "h1940.h"
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 3bc6231..b36edce 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -43,6 +43,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index c9d31ef..f5bc721 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -39,6 +39,7 @@
 
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f88e672..12023ca 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -38,6 +38,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/gpio-samsung.h>
 
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 42e7187..755df48 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -40,6 +40,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 2d82c4f..20e481d 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -33,7 +33,9 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index caa5b72..052ca23 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -39,6 +39,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 34676d1..ffb92cbc 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -30,6 +30,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 9ef3ccf..8e01b4f 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -42,6 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 5f9d656..03d379f 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 6819961..2c8adc0 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -37,6 +37,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <linux/atomic.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index b6c7191..886c214 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
index 7b4f333..1852696 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c24xx/setup-i2c.c
@@ -19,6 +19,7 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
index f65cb3e..c99b0f6 100644
--- a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
 void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
index 4e11aff..46466d2 100644
--- a/arch/arm/mach-s3c24xx/setup-ts.c
+++ b/arch/arm/mach-s3c24xx/setup-ts.c
@@ -15,7 +15,9 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <plat/gpio-cfg.h>
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 
 /**
  * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index 2ed2e32..8dea917 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2cb8dc5..175f015 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -192,7 +192,6 @@
 	select MFD_WM8350_I2C
 	select REGULATOR
 	select REGULATOR_WM8350
-	select SAMSUNG_GPIO_EXTRA64
 	help
 	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 	  and audio daughtercard for the Samsung SMDK6410 reference
@@ -208,7 +207,6 @@
 	select MFD_WM831X_I2C
 	select REGULATOR
 	select REGULATOR_WM831X
-	select SAMSUNG_GPIO_EXTRA64
 	help
 	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 	  daughtercard for the Samsung SMDK6410 reference platform.
@@ -294,7 +292,6 @@
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select SAMSUNG_GPIO_EXTRA128
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
 
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 7a3ce4c..76ab595 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -41,6 +41,7 @@
 #include <mach/map.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
index 4c3c999..7bc6668 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c64xx/crag6410.h
@@ -11,7 +11,7 @@
 #ifndef MACH_CRAG6410_H
 #define MACH_CRAG6410_H
 
-#include <linux/gpio.h>
+#include <mach/gpio-samsung.h>
 
 #define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
 
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index e367e87..ff780a8 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -22,6 +22,7 @@
 #include <plat/devs.h>
 #include <linux/platform_data/asoc-s3c.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
similarity index 95%
rename from arch/arm/mach-s3c64xx/include/mach/gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 8b540c4..9c81fac 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -12,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -88,6 +90,5 @@
 /* define the number of gpios we need to the one after the GPQ() range */
 #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
 
-#define BOARD_NR_GPIOS	(16 + CONFIG_SAMSUNG_GPIO_EXTRA)
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
 
-#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index d266dd5..ddeb0e5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 758e31b..3df3c37 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -48,8 +48,8 @@
 #include <video/samsung_fimd.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
-
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/regs-serial.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 614a03a..0431016 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -35,6 +35,7 @@
 
 #include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 58d46a3..8c84d34 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -30,6 +30,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 8bed37b..5152026 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -31,6 +31,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index a6b338f..5629df9 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -25,6 +25,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 8aca5da..dec4c08 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -23,6 +23,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index a052e10..27b3220 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -23,6 +23,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 27381cf..150f55f 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,6 +35,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d5ea938..43261d2 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -57,6 +57,7 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 8cdb824..b5a6698 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -28,6 +28,7 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
 
 #include "regs-gpio-memport.h"
 #include "regs-modem.h"
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 2cf8002..9d17bff 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -19,6 +19,7 @@
 
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c64xx_fb_gpio_setup_24bpp(void)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 40666ba..4b8c1cf 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -20,6 +20,7 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 3fdb24c..cd1df71 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -20,6 +20,7 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
index 648d8b8..689fb72 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -17,6 +17,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 
 void s3c64xx_ide_setup_gpio(void)
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
index 1d4d0ee..6ad9a89 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/keypad.h>
+#include <mach/gpio-samsung.h>
 
 void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index 6eac071..f426b7a 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -20,6 +20,7 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/sdhci.h>
+#include <mach/gpio-samsung.h>
 
 void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
index 4dc5345..5fd1a31 100644
--- a/arch/arm/mach-s3c64xx/setup-spi.c
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -10,6 +10,7 @@
 
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 06f0240..e4dec9f 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
 #include <linux/rfkill-gpio.h>
 #include "board.h"
 
@@ -36,7 +37,17 @@
 	},
 };
 
+static struct gpiod_lookup_table wifi_gpio_lookup = {
+	.dev_id = "rfkill_gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
+		GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+		{ },
+	},
+};
+
 void __init tegra_paz00_wifikill_init(void)
 {
+	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index a8de3cf..dd4c15d0 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -19,6 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
+#include <mach/gpio-samsung.h>
+#endif
+
 #include <plat/gpio-core.h>
 #include <plat/pm.h>
 
diff --git a/arch/arm/plat-samsung/setup-camif.c b/arch/arm/plat-samsung/setup-camif.c
index e01bf76..72d8edb 100644
--- a/arch/arm/plat-samsung/setup-camif.c
+++ b/arch/arm/plat-samsung/setup-camif.c
@@ -10,6 +10,7 @@
 
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 /* Number of camera port pins, without FIELD */
 #define S3C_CAMIF_NUM_GPIOS	13
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 8d24dcb..f8df0cc 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -64,6 +64,9 @@
 config VARIANT_IRQ_SWITCH
 	def_bool n
 
+config HAVE_XTENSA_GPIO32
+	def_bool n
+
 menu "Processor type and features"
 
 choice
@@ -73,16 +76,19 @@
 config XTENSA_VARIANT_FSF
 	bool "fsf - default (not generic) configuration"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 
 config XTENSA_VARIANT_DC232B
 	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
 
 config XTENSA_VARIANT_DC233C
 	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0f04444..25ce03e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -110,7 +110,7 @@
 
 config GPIO_CLPS711X
 	tristate "CLPS711X GPIO support"
-	depends on ARCH_CLPS711X
+	depends on ARCH_CLPS711X || COMPILE_TEST
 	select GPIO_GENERIC
 	help
 	  Say yes here to support GPIO on CLPS711X SoCs.
@@ -156,6 +156,13 @@
 	  To compile this driver as a module, choose M here: the module will
 	  be called f7188x-gpio.
 
+config GPIO_MOXART
+	bool "MOXART GPIO support"
+	depends on ARCH_MOXART
+	help
+	  Select this option to enable GPIO driver for
+	  MOXA ART SoC devices.
+
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
@@ -237,6 +244,15 @@
 	  Legacy GPIO support. Use only for platforms without support for
 	  pinctrl.
 
+config GPIO_SCH311X
+	tristate "SMSC SCH311x SuperI/O GPIO"
+	help
+	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
+	  SCH3116 "Super I/O" chipsets.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-sch311x.
+
 config GPIO_SPEAR_SPICS
 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
 	depends on PLAT_SPEAR
@@ -281,6 +297,15 @@
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
+config GPIO_XTENSA
+	bool "Xtensa GPIO32 support"
+	depends on XTENSA
+	depends on HAVE_XTENSA_GPIO32
+	depends on !SMP
+	help
+	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
+	  and EXPSTATE (output) ports
+
 config GPIO_VR41XX
 	tristate "NEC VR4100 series General-purpose I/O Uint support"
 	depends on CPU_VR41XX
@@ -353,7 +378,7 @@
 	  board computers.
 
 config GPIO_LYNXPOINT
-	bool "Intel Lynxpoint GPIO support"
+	tristate "Intel Lynxpoint GPIO support"
 	depends on ACPI && X86
 	select IRQ_DOMAIN
 	help
@@ -692,11 +717,13 @@
 
 config GPIO_MCP23S08
 	tristate "Microchip MCP23xxx I/O expander"
+	depends on OF_GPIO
 	depends on (SPI_MASTER && !I2C) || I2C
 	help
 	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
 	  I/O expanders.
 	  This provides a GPIO interface supporting inputs and outputs.
+	  The I2C versions of the chips can be used as interrupt-controller.
 
 config GPIO_MC33880
 	tristate "Freescale MC33880 high-side/low-side switch"
@@ -707,10 +734,10 @@
 
 config GPIO_74X164
 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
-	depends on SPI_MASTER
+	depends on SPI_MASTER && OF
 	help
-	  Platform driver for 74x164 compatible serial-in/parallel-out
-	  8-outputs shift registers. This driver can be used to provide access
+	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+	  shift registers. This driver can be used to provide access
 	  to more gpio outputs.
 
 comment "AC97 GPIO expanders:"
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 7971e36..c44fffa 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -46,6 +46,7 @@
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
+obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
@@ -67,6 +68,7 @@
 obj-$(CONFIG_GPIO_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
+obj-$(CONFIG_GPIO_SCH311X)	+= gpio-sch311x.o
 obj-$(CONFIG_GPIO_SODAVILLE)	+= gpio-sodaville.o
 obj-$(CONFIG_GPIO_SPEAR_SPICS)	+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
@@ -95,3 +97,4 @@
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
 obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
 obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
+obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index 1e04bf9..e4ae298 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/74x164.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
@@ -21,7 +20,6 @@
 #define GEN_74X164_NUMBER_GPIOS	8
 
 struct gen_74x164_chip {
-	struct spi_device	*spi;
 	u8			*buffer;
 	struct gpio_chip	gpio_chip;
 	struct mutex		lock;
@@ -35,6 +33,7 @@
 
 static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
 {
+	struct spi_device *spi = to_spi_device(chip->gpio_chip.dev);
 	struct spi_message message;
 	struct spi_transfer *msg_buf;
 	int i, ret = 0;
@@ -55,12 +54,12 @@
 	 * byte of the buffer will end up in the last register.
 	 */
 	for (i = chip->registers - 1; i >= 0; i--) {
-		msg_buf[i].tx_buf = chip->buffer +i;
+		msg_buf[i].tx_buf = chip->buffer + i;
 		msg_buf[i].len = sizeof(u8);
 		spi_message_add_tail(msg_buf + i, &message);
 	}
 
-	ret = spi_sync(chip->spi, &message);
+	ret = spi_sync(spi, &message);
 
 	kfree(msg_buf);
 
@@ -108,14 +107,8 @@
 static int gen_74x164_probe(struct spi_device *spi)
 {
 	struct gen_74x164_chip *chip;
-	struct gen_74x164_chip_platform_data *pdata;
 	int ret;
 
-	if (!spi->dev.of_node) {
-		dev_err(&spi->dev, "No device tree data available.\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * bits_per_word cannot be configured in platform data
 	 */
@@ -129,40 +122,32 @@
 	if (!chip)
 		return -ENOMEM;
 
-	pdata = dev_get_platdata(&spi->dev);
-	if (pdata && pdata->base)
-		chip->gpio_chip.base = pdata->base;
-	else
-		chip->gpio_chip.base = -1;
-
-	mutex_init(&chip->lock);
-
 	spi_set_drvdata(spi, chip);
 
-	chip->spi = spi;
-
 	chip->gpio_chip.label = spi->modalias;
 	chip->gpio_chip.direction_output = gen_74x164_direction_output;
 	chip->gpio_chip.get = gen_74x164_get_value;
 	chip->gpio_chip.set = gen_74x164_set_value;
+	chip->gpio_chip.base = -1;
 
-	if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
-		dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
-		ret = -EINVAL;
-		goto exit_destroy;
+	if (of_property_read_u32(spi->dev.of_node, "registers-number",
+				 &chip->registers)) {
+		dev_err(&spi->dev,
+			"Missing registers-number property in the DT.\n");
+		return -EINVAL;
 	}
 
 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
 	chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
-	if (!chip->buffer) {
-		ret = -ENOMEM;
-		goto exit_destroy;
-	}
+	if (!chip->buffer)
+		return -ENOMEM;
 
-	chip->gpio_chip.can_sleep = 1;
+	chip->gpio_chip.can_sleep = true;
 	chip->gpio_chip.dev = &spi->dev;
 	chip->gpio_chip.owner = THIS_MODULE;
 
+	mutex_init(&chip->lock);
+
 	ret = __gen_74x164_write_config(chip);
 	if (ret) {
 		dev_err(&spi->dev, "Failed writing: %d\n", ret);
@@ -170,31 +155,23 @@
 	}
 
 	ret = gpiochip_add(&chip->gpio_chip);
-	if (ret)
-		goto exit_destroy;
-
-	return ret;
+	if (!ret)
+		return 0;
 
 exit_destroy:
 	mutex_destroy(&chip->lock);
+
 	return ret;
 }
 
 static int gen_74x164_remove(struct spi_device *spi)
 {
-	struct gen_74x164_chip *chip;
+	struct gen_74x164_chip *chip = spi_get_drvdata(spi);
 	int ret;
 
-	chip = spi_get_drvdata(spi);
-	if (chip == NULL)
-		return -ENODEV;
-
 	ret = gpiochip_remove(&chip->gpio_chip);
 	if (!ret)
 		mutex_destroy(&chip->lock);
-	else
-		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
-				ret);
 
 	return ret;
 }
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index b204033..6fc6206 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -260,7 +260,7 @@
 	chip->direction_output = adnp_gpio_direction_output;
 	chip->get = adnp_gpio_get;
 	chip->set = adnp_gpio_set;
-	chip->can_sleep = 1;
+	chip->can_sleep = true;
 
 	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		chip->dbg_show = adnp_gpio_dbg_show;
@@ -408,6 +408,27 @@
 	mutex_unlock(&adnp->irq_lock);
 }
 
+static unsigned int adnp_irq_startup(struct irq_data *data)
+{
+	struct adnp *adnp = irq_data_get_irq_chip_data(data);
+
+	if (gpio_lock_as_irq(&adnp->gpio, data->hwirq))
+		dev_err(adnp->gpio.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			data->hwirq);
+	/* Satisfy the .enable semantics by unmasking the line */
+	adnp_irq_unmask(data);
+	return 0;
+}
+
+static void adnp_irq_shutdown(struct irq_data *data)
+{
+	struct adnp *adnp = irq_data_get_irq_chip_data(data);
+
+	adnp_irq_mask(data);
+	gpio_unlock_as_irq(&adnp->gpio, data->hwirq);
+}
+
 static struct irq_chip adnp_irq_chip = {
 	.name = "gpio-adnp",
 	.irq_mask = adnp_irq_mask,
@@ -415,6 +436,8 @@
 	.irq_set_type = adnp_irq_set_type,
 	.irq_bus_lock = adnp_irq_bus_lock,
 	.irq_bus_sync_unlock = adnp_irq_bus_unlock,
+	.irq_startup = adnp_irq_startup,
+	.irq_shutdown = adnp_irq_shutdown,
 };
 
 static int adnp_irq_map(struct irq_domain *domain, unsigned int irq,
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
index 084337d..6132659 100644
--- a/drivers/gpio/gpio-adp5520.c
+++ b/drivers/gpio/gpio-adp5520.c
@@ -127,7 +127,7 @@
 	gc->direction_output = adp5520_gpio_direction_output;
 	gc->get = adp5520_gpio_get_value;
 	gc->set = adp5520_gpio_set_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = pdata->gpio_start;
 	gc->ngpio = gpios;
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index 90fc4c9..3f190e6 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -380,7 +380,7 @@
 	gc->direction_output = adp5588_gpio_direction_output;
 	gc->get = adp5588_gpio_get_value;
 	gc->set = adp5588_gpio_set_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = pdata->gpio_start;
 	gc->ngpio = ADP5588_MAXGPIO;
diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c
index 710fafc..94e9992 100644
--- a/drivers/gpio/gpio-amd8111.c
+++ b/drivers/gpio/gpio-amd8111.c
@@ -60,7 +60,7 @@
  * register a pci_driver, because someone else might one day
  * want to register another driver on the same PCI id.
  */
-static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
+static const struct pci_device_id pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 },
 	{ 0, },	/* terminate list */
 };
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index dceb5dc..29bdff5 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -91,7 +91,7 @@
 	.get			= arizona_gpio_get,
 	.direction_output	= arizona_gpio_direction_out,
 	.set			= arizona_gpio_set,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int arizona_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 54c18c2..233d088 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -449,12 +449,34 @@
 	chained_irq_exit(chip, desc);
 }
 
+static unsigned int bcm_kona_gpio_irq_startup(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq))
+		dev_err(kona_gpio->gpio_chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			d->hwirq);
+	bcm_kona_gpio_irq_unmask(d);
+	return 0;
+}
+
+static void bcm_kona_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	bcm_kona_gpio_irq_mask(d);
+	gpio_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
+}
+
 static struct irq_chip bcm_gpio_irq_chip = {
 	.name = "bcm-kona-gpio",
 	.irq_ack = bcm_kona_gpio_irq_ack,
 	.irq_mask = bcm_kona_gpio_irq_mask,
 	.irq_unmask = bcm_kona_gpio_irq_unmask,
 	.irq_set_type = bcm_kona_gpio_irq_set_type,
+	.irq_startup = bcm_kona_gpio_irq_startup,
+	.irq_shutdown = bcm_kona_gpio_irq_shutdown,
 };
 
 static struct __initconst of_device_id bcm_kona_gpio_of_match[] = {
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index 9dfe36f..ecb3ca2d 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -169,7 +169,7 @@
 	c->dbg_show = NULL;
 	c->base = modparam_gpiobase;
 	c->ngpio = BT8XXGPIO_NR_GPIOS;
-	c->can_sleep = 0;
+	c->can_sleep = false;
 }
 
 static int bt8xxgpio_probe(struct pci_dev *dev,
@@ -308,7 +308,7 @@
 #define bt8xxgpio_resume NULL
 #endif /* CONFIG_PM */
 
-static DEFINE_PCI_DEVICE_TABLE(bt8xxgpio_pci_tbl) = {
+static const struct pci_device_id bt8xxgpio_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index 0924f20..d355027 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -77,7 +77,7 @@
 	return bgpio_remove(bgc);
 }
 
-static const struct of_device_id clps711x_gpio_ids[] = {
+static const struct of_device_id __maybe_unused clps711x_gpio_ids[] = {
 	{ .compatible = "cirrus,clps711x-gpio" },
 	{ }
 };
@@ -87,7 +87,7 @@
 	.driver	= {
 		.name		= "clps711x-gpio",
 		.owner		= THIS_MODULE,
-		.of_match_table	= clps711x_gpio_ids,
+		.of_match_table	= of_match_ptr(clps711x_gpio_ids),
 	},
 	.probe	= clps711x_gpio_probe,
 	.remove	= clps711x_gpio_remove,
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index 9b77dc0..416cdf7 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -200,7 +200,7 @@
 	.direction_input = da9052_gpio_direction_input,
 	.direction_output = da9052_gpio_direction_output,
 	.to_irq = da9052_gpio_to_irq,
-	.can_sleep = 1,
+	.can_sleep = true,
 	.ngpio = 16,
 	.base = -1,
 };
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
index 7ef0820..f992997 100644
--- a/drivers/gpio/gpio-da9055.c
+++ b/drivers/gpio/gpio-da9055.c
@@ -134,7 +134,7 @@
 	.direction_input = da9055_gpio_direction_input,
 	.direction_output = da9055_gpio_direction_output,
 	.to_irq = da9055_gpio_to_irq,
-	.can_sleep = 1,
+	.can_sleep = true,
 	.ngpio = 3,
 	.base = -1,
 };
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index ec19036..1e98a98 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -99,6 +99,27 @@
 	em_gio_write(p, GIO_IEN, BIT(irqd_to_hwirq(d)));
 }
 
+static unsigned int em_gio_irq_startup(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&p->gpio_chip, irqd_to_hwirq(d)))
+		dev_err(p->gpio_chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	em_gio_irq_enable(d);
+	return 0;
+}
+
+static void em_gio_irq_shutdown(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	em_gio_irq_disable(d);
+	gpio_unlock_as_irq(&p->gpio_chip, irqd_to_hwirq(d));
+}
+
+
 #define GIO_ASYNC(x) (x + 8)
 
 static unsigned char em_gio_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
@@ -328,6 +349,7 @@
 	gpio_chip->request = em_gio_request;
 	gpio_chip->free = em_gio_free;
 	gpio_chip->label = name;
+	gpio_chip->dev = &pdev->dev;
 	gpio_chip->owner = THIS_MODULE;
 	gpio_chip->base = pdata->gpio_base;
 	gpio_chip->ngpio = pdata->number_of_pins;
@@ -336,10 +358,10 @@
 	irq_chip->name = name;
 	irq_chip->irq_mask = em_gio_irq_disable;
 	irq_chip->irq_unmask = em_gio_irq_enable;
-	irq_chip->irq_enable = em_gio_irq_enable;
-	irq_chip->irq_disable = em_gio_irq_disable;
 	irq_chip->irq_set_type = em_gio_irq_set_type;
-	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE;
+	irq_chip->irq_startup = em_gio_irq_startup;
+	irq_chip->irq_shutdown = em_gio_irq_shutdown;
+	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
 
 	p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
 					      pdata->number_of_pins,
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 9cb8320..8f73ee0 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -135,6 +135,7 @@
 			.set              = f7188x_gpio_set,		\
 			.base             = _base,			\
 			.ngpio            = _ngpio,			\
+			.can_sleep        = true,			\
 		},							\
 		.regbase = _regbase,					\
 	}
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 814addb..f5bf3c3 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -252,7 +252,7 @@
 	chip->direction_output = ichx_gpio_direction_output;
 	chip->base = modparam_gpiobase;
 	chip->ngpio = ichx_priv.desc->ngpio;
-	chip->can_sleep = 0;
+	chip->can_sleep = false;
 	chip->dbg_show = NULL;
 }
 
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
index be803af..d1b50ef 100644
--- a/drivers/gpio/gpio-intel-mid.c
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -235,11 +235,33 @@
 {
 }
 
+static unsigned int intel_mid_irq_startup(struct irq_data *d)
+{
+	struct intel_mid_gpio *priv = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&priv->chip, irqd_to_hwirq(d)))
+		dev_err(priv->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	intel_mid_irq_unmask(d);
+	return 0;
+}
+
+static void intel_mid_irq_shutdown(struct irq_data *d)
+{
+	struct intel_mid_gpio *priv = irq_data_get_irq_chip_data(d);
+
+	intel_mid_irq_mask(d);
+	gpio_unlock_as_irq(&priv->chip, irqd_to_hwirq(d));
+}
+
 static struct irq_chip intel_mid_irqchip = {
 	.name		= "INTEL_MID-GPIO",
 	.irq_mask	= intel_mid_irq_mask,
 	.irq_unmask	= intel_mid_irq_unmask,
 	.irq_set_type	= intel_mid_irq_type,
+	.irq_startup	= intel_mid_irq_startup,
+	.irq_shutdown	= intel_mid_irq_shutdown,
 };
 
 static const struct intel_mid_gpio_ddata gpio_lincroft = {
@@ -275,7 +297,7 @@
 	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(intel_gpio_ids) = {
+static const struct pci_device_id intel_gpio_ids[] = {
 	{
 		/* Lincroft */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f),
@@ -358,8 +380,7 @@
 {
 	struct intel_mid_gpio *priv = d->host_data;
 
-	irq_set_chip_and_handler_name(irq, &intel_mid_irqchip,
-				      handle_simple_irq, "demux");
+	irq_set_chip_and_handler(irq, &intel_mid_irqchip, handle_simple_irq);
 	irq_set_chip_data(irq, priv);
 	irq_set_irq_type(irq, IRQ_TYPE_NONE);
 
@@ -418,6 +439,7 @@
 
 	priv->reg_base = pcim_iomap_table(pdev)[0];
 	priv->chip.label = dev_name(&pdev->dev);
+	priv->chip.dev = &pdev->dev;
 	priv->chip.request = intel_gpio_request;
 	priv->chip.direction_input = intel_gpio_direction_input;
 	priv->chip.direction_output = intel_gpio_direction_output;
@@ -426,7 +448,7 @@
 	priv->chip.to_irq = intel_gpio_to_irq;
 	priv->chip.base = gpio_base;
 	priv->chip.ngpio = ddata->ngpio;
-	priv->chip.can_sleep = 0;
+	priv->chip.can_sleep = false;
 	priv->pdev = pdev;
 
 	spin_lock_init(&priv->lock);
diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c
index efdc392..c6d8817 100644
--- a/drivers/gpio/gpio-kempld.c
+++ b/drivers/gpio/gpio-kempld.c
@@ -167,7 +167,7 @@
 	chip->label = "gpio-kempld";
 	chip->owner = THIS_MODULE;
 	chip->dev = dev;
-	chip->can_sleep = 1;
+	chip->can_sleep = true;
 	if (pdata && pdata->gpio_base)
 		chip->base = pdata->gpio_base;
 	else
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
index a3ac66e..464a83d 100644
--- a/drivers/gpio/gpio-ks8695.c
+++ b/drivers/gpio/gpio-ks8695.c
@@ -228,7 +228,7 @@
 	.to_irq			= ks8695_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= 16,
-	.can_sleep		= 0,
+	.can_sleep		= false,
 };
 
 /* Register the GPIOs */
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 2d5555d..225344d 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -25,10 +25,10 @@
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/gpio-lpc32xx.h>
 #include <mach/irqs.h>
 
 #define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
@@ -448,7 +448,7 @@
 			.base			= LPC32XX_GPIO_P0_GRP,
 			.ngpio			= LPC32XX_GPIO_P0_MAX,
 			.names			= gpio_p0_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p0,
 	},
@@ -464,7 +464,7 @@
 			.base			= LPC32XX_GPIO_P1_GRP,
 			.ngpio			= LPC32XX_GPIO_P1_MAX,
 			.names			= gpio_p1_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p1,
 	},
@@ -479,7 +479,7 @@
 			.base			= LPC32XX_GPIO_P2_GRP,
 			.ngpio			= LPC32XX_GPIO_P2_MAX,
 			.names			= gpio_p2_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p2,
 	},
@@ -495,7 +495,7 @@
 			.base			= LPC32XX_GPIO_P3_GRP,
 			.ngpio			= LPC32XX_GPIO_P3_MAX,
 			.names			= gpio_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},
@@ -509,7 +509,7 @@
 			.base			= LPC32XX_GPI_P3_GRP,
 			.ngpio			= LPC32XX_GPI_P3_MAX,
 			.names			= gpi_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},
@@ -523,7 +523,7 @@
 			.base			= LPC32XX_GPO_P3_GRP,
 			.ngpio			= LPC32XX_GPO_P3_MAX,
 			.names			= gpo_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index a080474..66b1853 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -301,6 +301,26 @@
 	spin_unlock_irqrestore(&lg->lock, flags);
 }
 
+static unsigned int lp_irq_startup(struct irq_data *d)
+{
+	struct lp_gpio *lg = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&lg->chip, irqd_to_hwirq(d)))
+		dev_err(lg->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	lp_irq_enable(d);
+	return 0;
+}
+
+static void lp_irq_shutdown(struct irq_data *d)
+{
+	struct lp_gpio *lg = irq_data_get_irq_chip_data(d);
+
+	lp_irq_disable(d);
+	gpio_unlock_as_irq(&lg->chip, irqd_to_hwirq(d));
+}
+
 static struct irq_chip lp_irqchip = {
 	.name = "LP-GPIO",
 	.irq_mask = lp_irq_mask,
@@ -308,6 +328,8 @@
 	.irq_enable = lp_irq_enable,
 	.irq_disable = lp_irq_disable,
 	.irq_set_type = lp_irq_type,
+	.irq_startup = lp_irq_startup,
+	.irq_shutdown = lp_irq_shutdown,
 	.flags = IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -331,8 +353,7 @@
 {
 	struct lp_gpio *lg = d->host_data;
 
-	irq_set_chip_and_handler_name(irq, &lp_irqchip, handle_simple_irq,
-				      "demux");
+	irq_set_chip_and_handler(irq, &lp_irqchip, handle_simple_irq);
 	irq_set_chip_data(irq, lg);
 	irq_set_irq_type(irq, IRQ_TYPE_NONE);
 
@@ -392,7 +413,7 @@
 	gc->set = lp_gpio_set;
 	gc->base = -1;
 	gc->ngpio = LP_NUM_GPIO;
-	gc->can_sleep = 0;
+	gc->can_sleep = false;
 	gc->dev = dev;
 
 	/* set up interrupts  */
@@ -438,6 +459,7 @@
 
 static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
 	{ "INT33C7", 0 },
+	{ "INT3437", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match);
@@ -469,4 +491,15 @@
 	return platform_driver_register(&lp_gpio_driver);
 }
 
+static void __exit lp_gpio_exit(void)
+{
+	platform_driver_unregister(&lp_gpio_driver);
+}
+
 subsys_initcall(lp_gpio_init);
+module_exit(lp_gpio_exit);
+
+MODULE_AUTHOR("Mathias Nyman (Intel)");
+MODULE_DESCRIPTION("GPIO interface for Intel Lynxpoint");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp_gpio");
diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c
index f4f4ed1..8672755 100644
--- a/drivers/gpio/gpio-max730x.c
+++ b/drivers/gpio/gpio-max730x.c
@@ -188,7 +188,7 @@
 	ts->chip.set = max7301_set;
 
 	ts->chip.ngpio = PIN_NUMBER;
-	ts->chip.can_sleep = 1;
+	ts->chip.can_sleep = true;
 	ts->chip.dev = dev;
 	ts->chip.owner = THIS_MODULE;
 
@@ -220,7 +220,6 @@
 	return ret;
 
 exit_destroy:
-	dev_set_drvdata(dev, NULL);
 	mutex_destroy(&ts->lock);
 	return ret;
 }
@@ -234,8 +233,6 @@
 	if (ts == NULL)
 		return -ENODEV;
 
-	dev_set_drvdata(dev, NULL);
-
 	/* Power down the chip and disable IRQ output */
 	ts->write(dev, 0x04, 0x00);
 
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 91ad74d..36cb290 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -564,7 +564,7 @@
 		gc->set = max732x_gpio_set_value;
 	}
 	gc->get = max732x_gpio_get_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = gpio_start;
 	gc->ngpio = port;
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index c0b7835..553a80a 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -115,7 +115,7 @@
 	mc->chip.set = mc33880_set;
 	mc->chip.base = pdata->base;
 	mc->chip.ngpio = PIN_NUMBER;
-	mc->chip.can_sleep = 1;
+	mc->chip.can_sleep = true;
 	mc->chip.dev = &spi->dev;
 	mc->chip.owner = THIS_MODULE;
 
diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c
index 0ab7000..dce35ff 100644
--- a/drivers/gpio/gpio-mc9s08dz60.c
+++ b/drivers/gpio/gpio-mc9s08dz60.c
@@ -102,7 +102,7 @@
 	mc9s->chip.dev = &client->dev;
 	mc9s->chip.owner = THIS_MODULE;
 	mc9s->chip.ngpio = GPIO_NUM;
-	mc9s->chip.can_sleep = 1;
+	mc9s->chip.can_sleep = true;
 	mc9s->chip.get = mc9s08dz60_get_value;
 	mc9s->chip.set = mc9s08dz60_set_value;
 	mc9s->chip.direction_output = mc9s08dz60_direction_output;
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 2deb0c5..1ac288e 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -1,5 +1,13 @@
 /*
- * MCP23S08 SPI/GPIO gpio expander driver
+ * MCP23S08 SPI/I2C GPIO gpio expander driver
+ *
+ * The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
+ * supported.
+ * For the I2C versions of the chips (mcp23008 and mcp23017) generation of
+ * interrupts is also supported.
+ * The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
+ * also capable of generating interrupts, but the linux driver does not
+ * support that yet.
  */
 
 #include <linux/kernel.h>
@@ -12,7 +20,8 @@
 #include <linux/spi/mcp23s08.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
-#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_device.h>
 
 /**
@@ -34,6 +43,7 @@
 #define MCP_DEFVAL	0x03
 #define MCP_INTCON	0x04
 #define MCP_IOCON	0x05
+#	define IOCON_MIRROR	(1 << 6)
 #	define IOCON_SEQOP	(1 << 5)
 #	define IOCON_HAEN	(1 << 3)
 #	define IOCON_ODR	(1 << 2)
@@ -57,8 +67,14 @@
 	u8			addr;
 
 	u16			cache[11];
+	u16			irq_rise;
+	u16			irq_fall;
+	int			irq;
+	bool			irq_controller;
 	/* lock protects the cached values */
 	struct mutex		lock;
+	struct mutex		irq_lock;
+	struct irq_domain	*irq_domain;
 
 	struct gpio_chip	chip;
 
@@ -77,6 +93,11 @@
 	struct mcp23s08		chip[];
 };
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 /*----------------------------------------------------------------------*/
 
 #if IS_ENABLED(CONFIG_I2C)
@@ -316,6 +337,195 @@
 }
 
 /*----------------------------------------------------------------------*/
+static irqreturn_t mcp23s08_irq(int irq, void *data)
+{
+	struct mcp23s08 *mcp = data;
+	int intcap, intf, i;
+	unsigned int child_irq;
+
+	mutex_lock(&mcp->lock);
+	intf = mcp->ops->read(mcp, MCP_INTF);
+	if (intf < 0) {
+		mutex_unlock(&mcp->lock);
+		return IRQ_HANDLED;
+	}
+
+	mcp->cache[MCP_INTF] = intf;
+
+	intcap = mcp->ops->read(mcp, MCP_INTCAP);
+	if (intcap < 0) {
+		mutex_unlock(&mcp->lock);
+		return IRQ_HANDLED;
+	}
+
+	mcp->cache[MCP_INTCAP] = intcap;
+	mutex_unlock(&mcp->lock);
+
+
+	for (i = 0; i < mcp->chip.ngpio; i++) {
+		if ((BIT(i) & mcp->cache[MCP_INTF]) &&
+		    ((BIT(i) & intcap & mcp->irq_rise) ||
+		     (mcp->irq_fall & ~intcap & BIT(i)))) {
+			child_irq = irq_find_mapping(mcp->irq_domain, i);
+			handle_nested_irq(child_irq);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
+
+	return irq_find_mapping(mcp->irq_domain, offset);
+}
+
+static void mcp23s08_irq_mask(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+
+	mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
+}
+
+static void mcp23s08_irq_unmask(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+
+	mcp->cache[MCP_GPINTEN] |= BIT(pos);
+}
+
+static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+	int status = 0;
+
+	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise |= BIT(pos);
+		mcp->irq_fall |= BIT(pos);
+	} else if (type & IRQ_TYPE_EDGE_RISING) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise |= BIT(pos);
+		mcp->irq_fall &= ~BIT(pos);
+	} else if (type & IRQ_TYPE_EDGE_FALLING) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise &= ~BIT(pos);
+		mcp->irq_fall |= BIT(pos);
+	} else
+		return -EINVAL;
+
+	return status;
+}
+
+static void mcp23s08_irq_bus_lock(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&mcp->irq_lock);
+}
+
+static void mcp23s08_irq_bus_unlock(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&mcp->lock);
+	mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
+	mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
+	mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
+	mutex_unlock(&mcp->lock);
+	mutex_unlock(&mcp->irq_lock);
+}
+
+static unsigned int mcp23s08_irq_startup(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	if (gpio_lock_as_irq(&mcp->chip, data->hwirq))
+		dev_err(mcp->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ usage\n",
+			data->hwirq);
+
+	mcp23s08_irq_unmask(data);
+	return 0;
+}
+
+static void mcp23s08_irq_shutdown(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mcp23s08_irq_mask(data);
+	gpio_unlock_as_irq(&mcp->chip, data->hwirq);
+}
+
+static struct irq_chip mcp23s08_irq_chip = {
+	.name = "gpio-mcp23xxx",
+	.irq_mask = mcp23s08_irq_mask,
+	.irq_unmask = mcp23s08_irq_unmask,
+	.irq_set_type = mcp23s08_irq_set_type,
+	.irq_bus_lock = mcp23s08_irq_bus_lock,
+	.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
+	.irq_startup = mcp23s08_irq_startup,
+	.irq_shutdown = mcp23s08_irq_shutdown,
+};
+
+static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
+{
+	struct gpio_chip *chip = &mcp->chip;
+	int err, irq, j;
+
+	mutex_init(&mcp->irq_lock);
+
+	mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
+						&irq_domain_simple_ops, mcp);
+	if (!mcp->irq_domain)
+		return -ENODEV;
+
+	err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					dev_name(chip->dev), mcp);
+	if (err != 0) {
+		dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
+			mcp->irq, err);
+		return err;
+	}
+
+	chip->to_irq = mcp23s08_gpio_to_irq;
+
+	for (j = 0; j < mcp->chip.ngpio; j++) {
+		irq = irq_create_mapping(mcp->irq_domain, j);
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, mcp);
+		irq_set_chip(irq, &mcp23s08_irq_chip);
+		irq_set_nested_thread(irq, true);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		irq_set_noprobe(irq);
+#endif
+	}
+	return 0;
+}
+
+static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
+{
+	unsigned int irq, i;
+
+	free_irq(mcp->irq, mcp);
+
+	for (i = 0; i < mcp->chip.ngpio; i++) {
+		irq = irq_find_mapping(mcp->irq_domain, i);
+		if (irq > 0)
+			irq_dispose_mapping(irq);
+	}
+
+	irq_domain_remove(mcp->irq_domain);
+}
+
+/*----------------------------------------------------------------------*/
 
 #ifdef CONFIG_DEBUG_FS
 
@@ -370,10 +580,11 @@
 /*----------------------------------------------------------------------*/
 
 static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
-			      void *data, unsigned addr,
-			      unsigned type, unsigned base, unsigned pullups)
+			      void *data, unsigned addr, unsigned type,
+			      unsigned base, unsigned pullups)
 {
 	int status;
+	bool mirror = false;
 
 	mutex_init(&mcp->lock);
 
@@ -425,20 +636,32 @@
 	}
 
 	mcp->chip.base = base;
-	mcp->chip.can_sleep = 1;
+	mcp->chip.can_sleep = true;
 	mcp->chip.dev = dev;
 	mcp->chip.owner = THIS_MODULE;
 
 	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
 	 * and MCP_IOCON.HAEN = 1, so we work with all chips.
 	 */
+
 	status = mcp->ops->read(mcp, MCP_IOCON);
 	if (status < 0)
 		goto fail;
-	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
+
+	mcp->irq_controller = of_property_read_bool(mcp->chip.of_node,
+						"interrupt-controller");
+	if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017))
+		mirror = of_property_read_bool(mcp->chip.of_node,
+						"microchip,irq-mirror");
+
+	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) {
 		/* mcp23s17 has IOCON twice, make sure they are in sync */
 		status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
 		status |= IOCON_HAEN | (IOCON_HAEN << 8);
+		status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
+		if (mirror)
+			status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
+
 		status = mcp->ops->write(mcp, MCP_IOCON, status);
 		if (status < 0)
 			goto fail;
@@ -470,6 +693,16 @@
 	}
 
 	status = gpiochip_add(&mcp->chip);
+	if (status < 0)
+		goto fail;
+
+	if (mcp->irq && mcp->irq_controller) {
+		status = mcp23s08_irq_setup(mcp);
+		if (status) {
+			mcp23s08_irq_teardown(mcp);
+			goto fail;
+		}
+	}
 fail:
 	if (status < 0)
 		dev_dbg(dev, "can't setup chip %d, --> %d\n",
@@ -546,6 +779,7 @@
 	if (match || !pdata) {
 		base = -1;
 		pullups = 0;
+		client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
 	} else {
 		if (!gpio_is_valid(pdata->base)) {
 			dev_dbg(&client->dev, "invalid platform data\n");
@@ -559,6 +793,7 @@
 	if (!mcp)
 		return -ENOMEM;
 
+	mcp->irq = client->irq;
 	status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
 				    id->driver_data, base, pullups);
 	if (status)
@@ -579,6 +814,9 @@
 	struct mcp23s08 *mcp = i2c_get_clientdata(client);
 	int status;
 
+	if (client->irq && mcp->irq_controller)
+		mcp23s08_irq_teardown(mcp);
+
 	status = gpiochip_remove(&mcp->chip);
 	if (status == 0)
 		kfree(mcp);
@@ -640,7 +878,7 @@
 
 	match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
 	if (match) {
-		type = (int)match->data;
+		type = (int)(uintptr_t)match->data;
 		status = of_property_read_u32(spi->dev.of_node,
 			    "microchip,spi-present-mask", &spi_present_mask);
 		if (status) {
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 6da6d76..d51329d 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -242,7 +242,7 @@
 	gpio->dbg_show = NULL;
 	gpio->base = -1;
 	gpio->ngpio = num_port;
-	gpio->can_sleep = 0;
+	gpio->can_sleep = false;
 	gpio->to_irq = ioh_gpio_to_irq;
 }
 
@@ -596,7 +596,7 @@
 #define ioh_gpio_resume NULL
 #endif
 
-static DEFINE_PCI_DEVICE_TABLE(ioh_gpio_pcidev_id) = {
+static const struct pci_device_id ioh_gpio_pcidev_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) },
 	{ 0, }
 };
diff --git a/drivers/gpio/gpio-moxart.c b/drivers/gpio/gpio-moxart.c
new file mode 100644
index 0000000..2af9900
--- /dev/null
+++ b/drivers/gpio/gpio-moxart.c
@@ -0,0 +1,156 @@
+/*
+ * MOXA ART SoCs GPIO driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+
+#define GPIO_DATA_OUT		0x00
+#define GPIO_DATA_IN		0x04
+#define GPIO_PIN_DIRECTION	0x08
+
+struct moxart_gpio_chip {
+	struct gpio_chip gpio;
+	void __iomem *base;
+};
+
+static inline struct moxart_gpio_chip *to_moxart_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct moxart_gpio_chip, gpio);
+}
+
+static int moxart_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return pinctrl_request_gpio(offset);
+}
+
+static void moxart_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	pinctrl_free_gpio(offset);
+}
+
+static int moxart_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_PIN_DIRECTION;
+
+	writel(readl(ioaddr) & ~BIT(offset), ioaddr);
+	return 0;
+}
+
+static int moxart_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_PIN_DIRECTION;
+
+	writel(readl(ioaddr) | BIT(offset), ioaddr);
+	return 0;
+}
+
+static void moxart_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_DATA_OUT;
+	u32 reg = readl(ioaddr);
+
+	if (value)
+		reg = reg | BIT(offset);
+	else
+		reg = reg & ~BIT(offset);
+
+
+	writel(reg, ioaddr);
+}
+
+static int moxart_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	u32 ret = readl(gc->base + GPIO_PIN_DIRECTION);
+
+	if (ret & BIT(offset))
+		return !!(readl(gc->base + GPIO_DATA_OUT) & BIT(offset));
+	else
+		return !!(readl(gc->base + GPIO_DATA_IN) & BIT(offset));
+}
+
+static struct gpio_chip moxart_template_chip = {
+	.label			= "moxart-gpio",
+	.request		= moxart_gpio_request,
+	.free			= moxart_gpio_free,
+	.direction_input	= moxart_gpio_direction_input,
+	.direction_output	= moxart_gpio_direction_output,
+	.set			= moxart_gpio_set,
+	.get			= moxart_gpio_get,
+	.ngpio			= 32,
+	.owner			= THIS_MODULE,
+};
+
+static int moxart_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct moxart_gpio_chip *mgc;
+	int ret;
+
+	mgc = devm_kzalloc(dev, sizeof(*mgc), GFP_KERNEL);
+	if (!mgc) {
+		dev_err(dev, "can't allocate GPIO chip container\n");
+		return -ENOMEM;
+	}
+	mgc->gpio = moxart_template_chip;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mgc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(mgc->base))
+		return PTR_ERR(mgc->base);
+
+	mgc->gpio.dev = dev;
+
+	ret = gpiochip_add(&mgc->gpio);
+	if (ret) {
+		dev_err(dev, "%s: gpiochip_add failed\n",
+			dev->of_node->full_name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id moxart_gpio_match[] = {
+	{ .compatible = "moxa,moxart-gpio" },
+	{ }
+};
+
+static struct platform_driver moxart_gpio_driver = {
+	.driver	= {
+		.name		= "moxart-gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table	= moxart_gpio_match,
+	},
+	.probe	= moxart_gpio_probe,
+};
+module_platform_driver(moxart_gpio_driver);
+
+MODULE_DESCRIPTION("MOXART GPIO chip driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
index d75eaa3..8f70ded 100644
--- a/drivers/gpio/gpio-msic.c
+++ b/drivers/gpio/gpio-msic.c
@@ -292,7 +292,7 @@
 	mg->chip.to_irq = msic_gpio_to_irq;
 	mg->chip.base = pdata->gpio_base;
 	mg->chip.ngpio = MSIC_NUM_GPIO;
-	mg->chip.can_sleep = 1;
+	mg->chip.can_sleep = true;
 	mg->chip.dev = dev;
 
 	mutex_init(&mg->buslock);
@@ -305,10 +305,9 @@
 
 	for (i = 0; i < mg->chip.ngpio; i++) {
 		irq_set_chip_data(i + mg->irq_base, mg);
-		irq_set_chip_and_handler_name(i + mg->irq_base,
-					      &msic_irqchip,
-					      handle_simple_irq,
-					      "demux");
+		irq_set_chip_and_handler(i + mg->irq_base,
+					 &msic_irqchip,
+					 handle_simple_irq);
 	}
 	irq_set_chained_handler(mg->irq, msic_gpio_irq_handler);
 	irq_set_handler_data(mg->irq, mg);
diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c
index 2baf0dd..a3351ac 100644
--- a/drivers/gpio/gpio-msm-v2.c
+++ b/drivers/gpio/gpio-msm-v2.c
@@ -430,10 +430,11 @@
 	return 0;
 }
 
-static struct of_device_id msm_gpio_of_match[] = {
+static const struct of_device_id msm_gpio_of_match[] = {
 	{ .compatible = "qcom,msm-gpio", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, msm_gpio_of_match);
 
 static int msm_gpio_remove(struct platform_device *dev)
 {
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index db31290..3b1fd1c 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -600,7 +600,7 @@
 	mvchip->chip.to_irq = mvebu_gpio_to_irq;
 	mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK;
 	mvchip->chip.ngpio = ngpios;
-	mvchip->chip.can_sleep = 0;
+	mvchip->chip.can_sleep = false;
 	mvchip->chip.of_node = np;
 	mvchip->chip.dbg_show = mvebu_gpio_dbg_show;
 
@@ -676,7 +676,7 @@
 	mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1);
 	if (mvchip->irqbase < 0) {
 		dev_err(&pdev->dev, "no irqs\n");
-		return -ENOMEM;
+		return mvchip->irqbase;
 	}
 
 	gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase,
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 3307f6d..db83b3c 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -422,7 +422,7 @@
 	port->irq_high = platform_get_irq(pdev, 1);
 	port->irq = platform_get_irq(pdev, 0);
 	if (port->irq < 0)
-		return -EINVAL;
+		return port->irq;
 
 	/* disable the interrupt and clear the status */
 	writel(0, port->base + GPIO_IMR);
diff --git a/drivers/gpio/gpio-octeon.c b/drivers/gpio/gpio-octeon.c
index 71a4a31..dbb0854 100644
--- a/drivers/gpio/gpio-octeon.c
+++ b/drivers/gpio/gpio-octeon.c
@@ -111,7 +111,7 @@
 	chip->dev = &pdev->dev;
 	chip->owner = THIS_MODULE;
 	chip->base = 0;
-	chip->can_sleep = 0;
+	chip->can_sleep = false;
 	chip->ngpio = 20;
 	chip->direction_input = octeon_gpio_dir_in;
 	chip->get = octeon_gpio_get;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index f319c9f..4243190 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -108,12 +108,12 @@
 	u32 l;
 
 	reg += bank->regs->direction;
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (is_input)
 		l |= 1 << gpio;
 	else
 		l &= ~(1 << gpio);
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 	bank->context.oe = l;
 }
 
@@ -132,7 +132,7 @@
 		bank->context.dataout &= ~l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 /* set data out value using mask register */
@@ -142,12 +142,12 @@
 	u32 gpio_bit = GPIO_BIT(bank, gpio);
 	u32 l;
 
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (enable)
 		l |= gpio_bit;
 	else
 		l &= ~gpio_bit;
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 	bank->context.dataout = l;
 }
 
@@ -155,26 +155,26 @@
 {
 	void __iomem *reg = bank->base + bank->regs->datain;
 
-	return (__raw_readl(reg) & (1 << offset)) != 0;
+	return (readl_relaxed(reg) & (1 << offset)) != 0;
 }
 
 static int _get_gpio_dataout(struct gpio_bank *bank, int offset)
 {
 	void __iomem *reg = bank->base + bank->regs->dataout;
 
-	return (__raw_readl(reg) & (1 << offset)) != 0;
+	return (readl_relaxed(reg) & (1 << offset)) != 0;
 }
 
 static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
 {
-	int l = __raw_readl(base + reg);
+	int l = readl_relaxed(base + reg);
 
 	if (set)
 		l |= mask;
 	else
 		l &= ~mask;
 
-	__raw_writel(l, base + reg);
+	writel_relaxed(l, base + reg);
 }
 
 static inline void _gpio_dbck_enable(struct gpio_bank *bank)
@@ -183,7 +183,7 @@
 		clk_enable(bank->dbck);
 		bank->dbck_enabled = true;
 
-		__raw_writel(bank->dbck_enable_mask,
+		writel_relaxed(bank->dbck_enable_mask,
 			     bank->base + bank->regs->debounce_en);
 	}
 }
@@ -196,7 +196,7 @@
 		 * enabled but the clock is not, GPIO module seems to be unable
 		 * to detect events and generate interrupts at least on OMAP3.
 		 */
-		__raw_writel(0, bank->base + bank->regs->debounce_en);
+		writel_relaxed(0, bank->base + bank->regs->debounce_en);
 
 		clk_disable(bank->dbck);
 		bank->dbck_enabled = false;
@@ -233,10 +233,10 @@
 
 	clk_enable(bank->dbck);
 	reg = bank->base + bank->regs->debounce;
-	__raw_writel(debounce, reg);
+	writel_relaxed(debounce, reg);
 
 	reg = bank->base + bank->regs->debounce_en;
-	val = __raw_readl(reg);
+	val = readl_relaxed(reg);
 
 	if (debounce)
 		val |= l;
@@ -244,7 +244,7 @@
 		val &= ~l;
 	bank->dbck_enable_mask = val;
 
-	__raw_writel(val, reg);
+	writel_relaxed(val, reg);
 	clk_disable(bank->dbck);
 	/*
 	 * Enable debounce clock per module.
@@ -283,12 +283,12 @@
 
 	bank->dbck_enable_mask &= ~gpio_bit;
 	bank->context.debounce_en &= ~gpio_bit;
-	__raw_writel(bank->context.debounce_en,
+        writel_relaxed(bank->context.debounce_en,
 		     bank->base + bank->regs->debounce_en);
 
 	if (!bank->dbck_enable_mask) {
 		bank->context.debounce = 0;
-		__raw_writel(bank->context.debounce, bank->base +
+		writel_relaxed(bank->context.debounce, bank->base +
 			     bank->regs->debounce);
 		clk_disable(bank->dbck);
 		bank->dbck_enabled = false;
@@ -311,18 +311,18 @@
 		  trigger & IRQ_TYPE_EDGE_FALLING);
 
 	bank->context.leveldetect0 =
-			__raw_readl(bank->base + bank->regs->leveldetect0);
+			readl_relaxed(bank->base + bank->regs->leveldetect0);
 	bank->context.leveldetect1 =
-			__raw_readl(bank->base + bank->regs->leveldetect1);
+			readl_relaxed(bank->base + bank->regs->leveldetect1);
 	bank->context.risingdetect =
-			__raw_readl(bank->base + bank->regs->risingdetect);
+			readl_relaxed(bank->base + bank->regs->risingdetect);
 	bank->context.fallingdetect =
-			__raw_readl(bank->base + bank->regs->fallingdetect);
+			readl_relaxed(bank->base + bank->regs->fallingdetect);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
 	}
 
 	/* This part needs to be executed always for OMAP{34xx, 44xx} */
@@ -347,8 +347,8 @@
 
 exit:
 	bank->level_mask =
-		__raw_readl(bank->base + bank->regs->leveldetect0) |
-		__raw_readl(bank->base + bank->regs->leveldetect1);
+		readl_relaxed(bank->base + bank->regs->leveldetect0) |
+		readl_relaxed(bank->base + bank->regs->leveldetect1);
 }
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -366,13 +366,13 @@
 
 	reg += bank->regs->irqctrl;
 
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if ((l >> gpio) & 1)
 		l &= ~(1 << gpio);
 	else
 		l |= 1 << gpio;
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 #else
 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
@@ -390,7 +390,7 @@
 	} else if (bank->regs->irqctrl) {
 		reg += bank->regs->irqctrl;
 
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
@@ -400,7 +400,7 @@
 		else
 			return -EINVAL;
 
-		__raw_writel(l, reg);
+		writel_relaxed(l, reg);
 	} else if (bank->regs->edgectrl1) {
 		if (gpio & 0x08)
 			reg += bank->regs->edgectrl2;
@@ -408,7 +408,7 @@
 			reg += bank->regs->edgectrl1;
 
 		gpio &= 0x07;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		l &= ~(3 << (gpio << 1));
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
@@ -418,8 +418,8 @@
 		/* Enable wake-up during idle for dynamic tick */
 		_gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
-		__raw_writel(l, reg);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
+		writel_relaxed(l, reg);
 	}
 	return 0;
 }
@@ -430,17 +430,17 @@
 		void __iomem *reg = bank->base + bank->regs->pinctrl;
 
 		/* Claim the pin for MPU */
-		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
+		writel_relaxed(readl_relaxed(reg) | (1 << offset), reg);
 	}
 
 	if (bank->regs->ctrl && !BANK_USED(bank)) {
 		void __iomem *reg = bank->base + bank->regs->ctrl;
 		u32 ctrl;
 
-		ctrl = __raw_readl(reg);
+		ctrl = readl_relaxed(reg);
 		/* Module is enabled, clocks are not gated */
 		ctrl &= ~GPIO_MOD_CTRL_BIT;
-		__raw_writel(ctrl, reg);
+		writel_relaxed(ctrl, reg);
 		bank->context.ctrl = ctrl;
 	}
 }
@@ -455,17 +455,17 @@
 		/* Disable wake-up during idle for dynamic tick */
 		_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
 	}
 
 	if (bank->regs->ctrl && !BANK_USED(bank)) {
 		void __iomem *reg = bank->base + bank->regs->ctrl;
 		u32 ctrl;
 
-		ctrl = __raw_readl(reg);
+		ctrl = readl_relaxed(reg);
 		/* Module is disabled, clocks are gated */
 		ctrl |= GPIO_MOD_CTRL_BIT;
-		__raw_writel(ctrl, reg);
+		writel_relaxed(ctrl, reg);
 		bank->context.ctrl = ctrl;
 	}
 }
@@ -474,7 +474,7 @@
 {
 	void __iomem *reg = bank->base + bank->regs->direction;
 
-	return __raw_readl(reg) & mask;
+	return readl_relaxed(reg) & mask;
 }
 
 static int gpio_irq_type(struct irq_data *d, unsigned type)
@@ -538,16 +538,16 @@
 	void __iomem *reg = bank->base;
 
 	reg += bank->regs->irqstatus;
-	__raw_writel(gpio_mask, reg);
+	writel_relaxed(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 	if (bank->regs->irqstatus2) {
 		reg = bank->base + bank->regs->irqstatus2;
-		__raw_writel(gpio_mask, reg);
+		writel_relaxed(gpio_mask, reg);
 	}
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
-	__raw_readl(reg);
+	readl_relaxed(reg);
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -562,7 +562,7 @@
 	u32 mask = (1 << bank->width) - 1;
 
 	reg += bank->regs->irqenable;
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (bank->regs->irqenable_inv)
 		l = ~l;
 	l &= mask;
@@ -580,7 +580,7 @@
 		bank->context.irqenable1 |= gpio_mask;
 	} else {
 		reg += bank->regs->irqenable;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if (bank->regs->irqenable_inv)
 			l &= ~gpio_mask;
 		else
@@ -588,7 +588,7 @@
 		bank->context.irqenable1 = l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
@@ -602,7 +602,7 @@
 		bank->context.irqenable1 &= ~gpio_mask;
 	} else {
 		reg += bank->regs->irqenable;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if (bank->regs->irqenable_inv)
 			l |= gpio_mask;
 		else
@@ -610,7 +610,7 @@
 		bank->context.irqenable1 = l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
@@ -646,7 +646,7 @@
 	else
 		bank->context.wake_en &= ~gpio_bit;
 
-	__raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
+	writel_relaxed(bank->context.wake_en, bank->base + bank->regs->wkup_en);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -748,7 +748,7 @@
 		u32 enabled;
 
 		enabled = _get_gpio_irqbank_mask(bank);
-		isr_saved = isr = __raw_readl(isr_reg) & enabled;
+		isr_saved = isr = readl_relaxed(isr_reg) & enabled;
 
 		if (bank->level_mask)
 			level_mask = bank->level_mask & enabled;
@@ -883,7 +883,7 @@
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
+	writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -898,7 +898,7 @@
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(bank->context.wake_en, mask_reg);
+	writel_relaxed(bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1011,7 +1011,7 @@
 	if (called || bank->regs->revision == USHRT_MAX)
 		return;
 
-	rev = __raw_readw(bank->base + bank->regs->revision);
+	rev = readw_relaxed(bank->base + bank->regs->revision);
 	pr_info("OMAP GPIO hardware version %d.%d\n",
 		(rev >> 4) & 0x0f, rev & 0x0f);
 
@@ -1032,20 +1032,20 @@
 		l = 0xffff;
 
 	if (bank->is_mpuio) {
-		__raw_writel(l, bank->base + bank->regs->irqenable);
+		writel_relaxed(l, bank->base + bank->regs->irqenable);
 		return;
 	}
 
 	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
 	_gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv);
 	if (bank->regs->debounce_en)
-		__raw_writel(0, base + bank->regs->debounce_en);
+		writel_relaxed(0, base + bank->regs->debounce_en);
 
 	/* Save OE default value (0xffffffff) in the context */
-	bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
+	bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
 	 /* Initialize interface clk ungated, module enabled */
 	if (bank->regs->ctrl)
-		__raw_writel(0, base + bank->regs->ctrl);
+		writel_relaxed(0, base + bank->regs->ctrl);
 
 	bank->dbck = clk_get(bank->dev, "dbclk");
 	if (IS_ERR(bank->dbck))
@@ -1282,11 +1282,11 @@
 	 */
 	wake_low = bank->context.leveldetect0 & bank->context.wake_en;
 	if (wake_low)
-		__raw_writel(wake_low | bank->context.fallingdetect,
+		writel_relaxed(wake_low | bank->context.fallingdetect,
 			     bank->base + bank->regs->fallingdetect);
 	wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
 	if (wake_hi)
-		__raw_writel(wake_hi | bank->context.risingdetect,
+		writel_relaxed(wake_hi | bank->context.risingdetect,
 			     bank->base + bank->regs->risingdetect);
 
 	if (!bank->enabled_non_wakeup_gpios)
@@ -1301,7 +1301,7 @@
 	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
 	 * generated.  See OMAP2420 Errata item 1.101.
 	 */
-	bank->saved_datain = __raw_readl(bank->base +
+	bank->saved_datain = readl_relaxed(bank->base +
 						bank->regs->datain);
 	l1 = bank->context.fallingdetect;
 	l2 = bank->context.risingdetect;
@@ -1309,8 +1309,8 @@
 	l1 &= ~bank->enabled_non_wakeup_gpios;
 	l2 &= ~bank->enabled_non_wakeup_gpios;
 
-	__raw_writel(l1, bank->base + bank->regs->fallingdetect);
-	__raw_writel(l2, bank->base + bank->regs->risingdetect);
+	writel_relaxed(l1, bank->base + bank->regs->fallingdetect);
+	writel_relaxed(l2, bank->base + bank->regs->risingdetect);
 
 	bank->workaround_enabled = true;
 
@@ -1358,9 +1358,9 @@
 	 * generate a PRCM wakeup.  Here we restore the
 	 * pre-runtime_suspend() values for edge triggering.
 	 */
-	__raw_writel(bank->context.fallingdetect,
+	writel_relaxed(bank->context.fallingdetect,
 		     bank->base + bank->regs->fallingdetect);
-	__raw_writel(bank->context.risingdetect,
+	writel_relaxed(bank->context.risingdetect,
 		     bank->base + bank->regs->risingdetect);
 
 	if (bank->loses_context) {
@@ -1382,7 +1382,7 @@
 		return 0;
 	}
 
-	l = __raw_readl(bank->base + bank->regs->datain);
+	l = readl_relaxed(bank->base + bank->regs->datain);
 
 	/*
 	 * Check if any of the non-wakeup interrupt GPIOs have changed
@@ -1412,24 +1412,24 @@
 	if (gen) {
 		u32 old0, old1;
 
-		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
-		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
+		old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
+		old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
 
 		if (!bank->regs->irqstatus_raw0) {
-			__raw_writel(old0 | gen, bank->base +
+			writel_relaxed(old0 | gen, bank->base +
 						bank->regs->leveldetect0);
-			__raw_writel(old1 | gen, bank->base +
+			writel_relaxed(old1 | gen, bank->base +
 						bank->regs->leveldetect1);
 		}
 
 		if (bank->regs->irqstatus_raw0) {
-			__raw_writel(old0 | l, bank->base +
+			writel_relaxed(old0 | l, bank->base +
 						bank->regs->leveldetect0);
-			__raw_writel(old1 | l, bank->base +
+			writel_relaxed(old1 | l, bank->base +
 						bank->regs->leveldetect1);
 		}
-		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
-		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
+		writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
+		writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
 	}
 
 	bank->workaround_enabled = false;
@@ -1471,55 +1471,55 @@
 	struct omap_gpio_reg_offs *regs = p->regs;
 	void __iomem *base = p->base;
 
-	p->context.ctrl		= __raw_readl(base + regs->ctrl);
-	p->context.oe		= __raw_readl(base + regs->direction);
-	p->context.wake_en	= __raw_readl(base + regs->wkup_en);
-	p->context.leveldetect0	= __raw_readl(base + regs->leveldetect0);
-	p->context.leveldetect1	= __raw_readl(base + regs->leveldetect1);
-	p->context.risingdetect	= __raw_readl(base + regs->risingdetect);
-	p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
-	p->context.irqenable1	= __raw_readl(base + regs->irqenable);
-	p->context.irqenable2	= __raw_readl(base + regs->irqenable2);
+	p->context.ctrl		= readl_relaxed(base + regs->ctrl);
+	p->context.oe		= readl_relaxed(base + regs->direction);
+	p->context.wake_en	= readl_relaxed(base + regs->wkup_en);
+	p->context.leveldetect0	= readl_relaxed(base + regs->leveldetect0);
+	p->context.leveldetect1	= readl_relaxed(base + regs->leveldetect1);
+	p->context.risingdetect	= readl_relaxed(base + regs->risingdetect);
+	p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
+	p->context.irqenable1	= readl_relaxed(base + regs->irqenable);
+	p->context.irqenable2	= readl_relaxed(base + regs->irqenable2);
 
 	if (regs->set_dataout && p->regs->clr_dataout)
-		p->context.dataout = __raw_readl(base + regs->set_dataout);
+		p->context.dataout = readl_relaxed(base + regs->set_dataout);
 	else
-		p->context.dataout = __raw_readl(base + regs->dataout);
+		p->context.dataout = readl_relaxed(base + regs->dataout);
 
 	p->context_valid = true;
 }
 
 static void omap_gpio_restore_context(struct gpio_bank *bank)
 {
-	__raw_writel(bank->context.wake_en,
+	writel_relaxed(bank->context.wake_en,
 				bank->base + bank->regs->wkup_en);
-	__raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
-	__raw_writel(bank->context.leveldetect0,
+	writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl);
+	writel_relaxed(bank->context.leveldetect0,
 				bank->base + bank->regs->leveldetect0);
-	__raw_writel(bank->context.leveldetect1,
+	writel_relaxed(bank->context.leveldetect1,
 				bank->base + bank->regs->leveldetect1);
-	__raw_writel(bank->context.risingdetect,
+	writel_relaxed(bank->context.risingdetect,
 				bank->base + bank->regs->risingdetect);
-	__raw_writel(bank->context.fallingdetect,
+	writel_relaxed(bank->context.fallingdetect,
 				bank->base + bank->regs->fallingdetect);
 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
-		__raw_writel(bank->context.dataout,
+		writel_relaxed(bank->context.dataout,
 				bank->base + bank->regs->set_dataout);
 	else
-		__raw_writel(bank->context.dataout,
+		writel_relaxed(bank->context.dataout,
 				bank->base + bank->regs->dataout);
-	__raw_writel(bank->context.oe, bank->base + bank->regs->direction);
+	writel_relaxed(bank->context.oe, bank->base + bank->regs->direction);
 
 	if (bank->dbck_enable_mask) {
-		__raw_writel(bank->context.debounce, bank->base +
+		writel_relaxed(bank->context.debounce, bank->base +
 					bank->regs->debounce);
-		__raw_writel(bank->context.debounce_en,
+		writel_relaxed(bank->context.debounce_en,
 					bank->base + bank->regs->debounce_en);
 	}
 
-	__raw_writel(bank->context.irqenable1,
+	writel_relaxed(bank->context.irqenable1,
 				bank->base + bank->regs->irqenable);
-	__raw_writel(bank->context.irqenable2,
+	writel_relaxed(bank->context.irqenable2,
 				bank->base + bank->regs->irqenable2);
 }
 #endif /* CONFIG_PM_RUNTIME */
diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c
index 11801e98..da9d332 100644
--- a/drivers/gpio/gpio-palmas.c
+++ b/drivers/gpio/gpio-palmas.c
@@ -182,7 +182,7 @@
 	palmas_gpio->gpio_chip.owner = THIS_MODULE;
 	palmas_gpio->gpio_chip.label = dev_name(&pdev->dev);
 	palmas_gpio->gpio_chip.ngpio = dev_data->ngpio;
-	palmas_gpio->gpio_chip.can_sleep = 1;
+	palmas_gpio->gpio_chip.can_sleep = true;
 	palmas_gpio->gpio_chip.direction_input = palmas_gpio_input;
 	palmas_gpio->gpio_chip.direction_output = palmas_gpio_output;
 	palmas_gpio->gpio_chip.to_irq = palmas_gpio_to_irq;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 6e48c07..019b23b 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -354,7 +354,7 @@
 	gc->direction_output = pca953x_gpio_direction_output;
 	gc->get = pca953x_gpio_get_value;
 	gc->set = pca953x_gpio_set_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = chip->gpio_start;
 	gc->ngpio = gpios;
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 1535686..8273582 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -305,7 +305,7 @@
 	spin_lock_init(&gpio->slock);
 
 	gpio->chip.base			= pdata ? pdata->gpio_base : -1;
-	gpio->chip.can_sleep		= 1;
+	gpio->chip.can_sleep		= true;
 	gpio->chip.dev			= &client->dev;
 	gpio->chip.owner		= THIS_MODULE;
 	gpio->chip.get			= pcf857x_get;
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 0fec097..9656c19 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -224,7 +224,7 @@
 	gpio->dbg_show = NULL;
 	gpio->base = -1;
 	gpio->ngpio = gpio_pins[chip->ioh];
-	gpio->can_sleep = 0;
+	gpio->can_sleep = false;
 	gpio->to_irq = pch_gpio_to_irq;
 }
 
@@ -518,7 +518,7 @@
 #endif
 
 #define PCI_VENDOR_ID_ROHM             0x10DB
-static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
+static const struct pci_device_id pch_gpio_pcidev_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index cc13d1b..42e6e64 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -263,7 +263,8 @@
 
 static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+	u32 gplr = readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET);
+	return !!(gplr & (1 << offset));
 }
 
 static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c
index e63d6a3..122b776 100644
--- a/drivers/gpio/gpio-rc5t583.c
+++ b/drivers/gpio/gpio-rc5t583.c
@@ -133,7 +133,7 @@
 	rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get,
 	rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq,
 	rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO,
-	rc5t583_gpio->gpio_chip.can_sleep = 1,
+	rc5t583_gpio->gpio_chip.can_sleep = true,
 	rc5t583_gpio->gpio_chip.dev = &pdev->dev;
 	rc5t583_gpio->gpio_chip.base = -1;
 	rc5t583_gpio->rc5t583 = rc5t583;
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index 8b7e719..ca76ce7 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -285,7 +285,34 @@
 	.map	= gpio_rcar_irq_domain_map,
 };
 
-static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
+struct gpio_rcar_info {
+	bool has_both_edge_trigger;
+};
+
+static const struct of_device_id gpio_rcar_of_table[] = {
+	{
+		.compatible = "renesas,gpio-r8a7790",
+		.data = (void *)&(const struct gpio_rcar_info) {
+			.has_both_edge_trigger = true,
+		},
+	}, {
+		.compatible = "renesas,gpio-r8a7791",
+		.data = (void *)&(const struct gpio_rcar_info) {
+			.has_both_edge_trigger = true,
+		},
+	}, {
+		.compatible = "renesas,gpio-rcar",
+		.data = (void *)&(const struct gpio_rcar_info) {
+			.has_both_edge_trigger = false,
+		},
+	}, {
+		/* Terminator */
+	},
+};
+
+MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
+
+static int gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
 {
 	struct gpio_rcar_config *pdata = dev_get_platdata(&p->pdev->dev);
 	struct device_node *np = p->pdev->dev.of_node;
@@ -295,11 +322,21 @@
 	if (pdata) {
 		p->config = *pdata;
 	} else if (IS_ENABLED(CONFIG_OF) && np) {
+		const struct of_device_id *match;
+		const struct gpio_rcar_info *info;
+
+		match = of_match_node(gpio_rcar_of_table, np);
+		if (!match)
+			return -EINVAL;
+
+		info = match->data;
+
 		ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0,
 						       &args);
 		p->config.number_of_pins = ret == 0 ? args.args[2]
 					 : RCAR_MAX_GPIO_PER_BANK;
 		p->config.gpio_base = -1;
+		p->config.has_both_edge_trigger = info->has_both_edge_trigger;
 	}
 
 	if (p->config.number_of_pins == 0 ||
@@ -309,6 +346,8 @@
 			 p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
 		p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
 	}
+
+	return 0;
 }
 
 static int gpio_rcar_probe(struct platform_device *pdev)
@@ -331,7 +370,9 @@
 	spin_lock_init(&p->lock);
 
 	/* Get device configuration from DT node or platform data. */
-	gpio_rcar_parse_pdata(p);
+	ret = gpio_rcar_parse_pdata(p);
+	if (ret < 0)
+		return ret;
 
 	platform_set_drvdata(pdev, p);
 
@@ -370,10 +411,9 @@
 	irq_chip->name = name;
 	irq_chip->irq_mask = gpio_rcar_irq_disable;
 	irq_chip->irq_unmask = gpio_rcar_irq_enable;
-	irq_chip->irq_enable = gpio_rcar_irq_enable;
-	irq_chip->irq_disable = gpio_rcar_irq_disable;
 	irq_chip->irq_set_type = gpio_rcar_irq_set_type;
-	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
+	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED
+			 | IRQCHIP_MASK_ON_SUSPEND;
 
 	p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
 					      p->config.number_of_pins,
@@ -436,17 +476,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_OF
-static const struct of_device_id gpio_rcar_of_table[] = {
-	{
-		.compatible = "renesas,gpio-rcar",
-	},
-	{ },
-};
-
-MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
-#endif
-
 static struct platform_driver gpio_rcar_device_driver = {
 	.probe		= gpio_rcar_probe,
 	.remove		= gpio_rcar_remove,
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 76e02b9..a85e00b 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -30,10 +30,13 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
+#include <mach/gpio-samsung.h>
+#endif
+
 #include <plat/cpu.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -1053,7 +1056,7 @@
 			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
-			.ngpio			= 24,
+			.ngpio			= 27,
 			.direction_input	= s3c24xx_gpiolib_banka_input,
 			.direction_output	= s3c24xx_gpiolib_banka_output,
 		},
@@ -1062,7 +1065,7 @@
 			.base	= S3C2410_GPB(0),
 			.owner	= THIS_MODULE,
 			.label	= "GPIOB",
-			.ngpio	= 16,
+			.ngpio	= 11,
 		},
 	}, {
 		.chip	= {
@@ -1107,7 +1110,7 @@
 			.base	= S3C2410_GPH(0),
 			.owner	= THIS_MODULE,
 			.label	= "GPIOH",
-			.ngpio	= 11,
+			.ngpio	= 15,
 		},
 	},
 		/* GPIOS for the S3C2443 and later devices. */
diff --git a/drivers/gpio/gpio-sch311x.c b/drivers/gpio/gpio-sch311x.c
new file mode 100644
index 0000000..0357387
--- /dev/null
+++ b/drivers/gpio/gpio-sch311x.c
@@ -0,0 +1,432 @@
+/*
+ * GPIO driver for the SMSC SCH311x Super-I/O chips
+ *
+ * Copyright (C) 2013 Bruno Randolf <br1@einfach.org>
+ *
+ * SuperIO functions and chip detection:
+ * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#define DRV_NAME			"gpio-sch311x"
+
+#define SCH311X_GPIO_CONF_OUT		0x00
+#define SCH311X_GPIO_CONF_IN		0x01
+#define SCH311X_GPIO_CONF_INVERT	0x02
+#define SCH311X_GPIO_CONF_OPEN_DRAIN	0x80
+
+#define SIO_CONFIG_KEY_ENTER		0x55
+#define SIO_CONFIG_KEY_EXIT		0xaa
+
+#define GP1				0x4b
+
+static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e };
+
+static struct platform_device *sch311x_gpio_pdev;
+
+struct sch311x_pdev_data {		/* platform device data */
+	unsigned short runtime_reg;	/* runtime register base address */
+};
+
+struct sch311x_gpio_block {		/* one GPIO block runtime data */
+	struct gpio_chip chip;
+	unsigned short data_reg;	/* from definition below */
+	unsigned short *config_regs;	/* pointer to definition below */
+	unsigned short runtime_reg;	/* runtime register */
+	spinlock_t lock;		/* lock for this GPIO block */
+};
+
+struct sch311x_gpio_priv {		/* driver private data */
+	struct sch311x_gpio_block blocks[6];
+};
+
+struct sch311x_gpio_block_def {		/* register address definitions */
+	unsigned short data_reg;
+	unsigned short config_regs[8];
+	unsigned short base;
+};
+
+/* Note: some GPIOs are not available, these are marked with 0x00 */
+
+static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = {
+	{
+		.data_reg = 0x4b,	/* GP1 */
+		.config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b},
+		.base = 10,
+	},
+	{
+		.data_reg = 0x4c,	/* GP2 */
+		.config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32},
+		.base = 20,
+	},
+	{
+		.data_reg = 0x4d,	/* GP3 */
+		.config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a},
+		.base = 30,
+	},
+	{
+		.data_reg = 0x4e,	/* GP4 */
+		.config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73},
+		.base = 40,
+	},
+	{
+		.data_reg = 0x4f,	/* GP5 */
+		.config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46},
+		.base = 50,
+	},
+	{
+		.data_reg = 0x50,	/* GP6 */
+		.config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59},
+		.base = 60,
+	},
+};
+
+static inline struct sch311x_gpio_block *
+to_sch311x_gpio_block(struct gpio_chip *chip)
+{
+	return container_of(chip, struct sch311x_gpio_block, chip);
+}
+
+
+/*
+ *	Super-IO functions
+ */
+
+static inline int sch311x_sio_enter(int sio_config_port)
+{
+	/* Don't step on other drivers' I/O space by accident. */
+	if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) {
+		pr_err(DRV_NAME "I/O address 0x%04x already in use\n",
+		       sio_config_port);
+		return -EBUSY;
+	}
+
+	outb(SIO_CONFIG_KEY_ENTER, sio_config_port);
+	return 0;
+}
+
+static inline void sch311x_sio_exit(int sio_config_port)
+{
+	outb(SIO_CONFIG_KEY_EXIT, sio_config_port);
+	release_region(sio_config_port, 2);
+}
+
+static inline int sch311x_sio_inb(int sio_config_port, int reg)
+{
+	outb(reg, sio_config_port);
+	return inb(sio_config_port + 1);
+}
+
+static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
+{
+	outb(reg, sio_config_port);
+	outb(val, sio_config_port + 1);
+}
+
+
+/*
+ *	GPIO functions
+ */
+
+static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+
+	if (block->config_regs[offset] == 0) /* GPIO is not available */
+		return -ENODEV;
+
+	if (!request_region(block->runtime_reg + block->config_regs[offset],
+			    1, DRV_NAME)) {
+		dev_err(chip->dev, "Failed to request region 0x%04x.\n",
+			block->runtime_reg + block->config_regs[offset]);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+
+	if (block->config_regs[offset] == 0) /* GPIO is not available */
+		return;
+
+	release_region(block->runtime_reg + block->config_regs[offset], 1);
+}
+
+static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+	unsigned char data;
+
+	spin_lock(&block->lock);
+	data = inb(block->runtime_reg + block->data_reg);
+	spin_unlock(&block->lock);
+
+	return !!(data & BIT(offset));
+}
+
+static void __sch311x_gpio_set(struct sch311x_gpio_block *block,
+			       unsigned offset, int value)
+{
+	unsigned char data = inb(block->runtime_reg + block->data_reg);
+	if (value)
+		data |= BIT(offset);
+	else
+		data &= ~BIT(offset);
+	outb(data, block->runtime_reg + block->data_reg);
+}
+
+static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset,
+			     int value)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+
+	spin_lock(&block->lock);
+	 __sch311x_gpio_set(block, offset, value);
+	spin_unlock(&block->lock);
+}
+
+static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+
+	spin_lock(&block->lock);
+	outb(SCH311X_GPIO_CONF_IN, block->runtime_reg +
+	     block->config_regs[offset]);
+	spin_unlock(&block->lock);
+
+	return 0;
+}
+
+static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip);
+
+	spin_lock(&block->lock);
+
+	outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg +
+	     block->config_regs[offset]);
+
+	__sch311x_gpio_set(block, offset, value);
+
+	spin_unlock(&block->lock);
+	return 0;
+}
+
+static int sch311x_gpio_probe(struct platform_device *pdev)
+{
+	struct sch311x_pdev_data *pdata = pdev->dev.platform_data;
+	struct sch311x_gpio_priv *priv;
+	struct sch311x_gpio_block *block;
+	int err, i;
+
+	/* we can register all GPIO data registers at once */
+	if (!request_region(pdata->runtime_reg + GP1, 6, DRV_NAME)) {
+		dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n",
+			pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5);
+		return -EBUSY;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
+		block = &priv->blocks[i];
+
+		spin_lock_init(&block->lock);
+
+		block->chip.label = DRV_NAME;
+		block->chip.owner = THIS_MODULE;
+		block->chip.request = sch311x_gpio_request;
+		block->chip.free = sch311x_gpio_free;
+		block->chip.direction_input = sch311x_gpio_direction_in;
+		block->chip.direction_output = sch311x_gpio_direction_out;
+		block->chip.get = sch311x_gpio_get;
+		block->chip.set = sch311x_gpio_set;
+		block->chip.ngpio = 8;
+		block->chip.dev = &pdev->dev;
+		block->chip.base = sch311x_gpio_blocks[i].base;
+		block->config_regs = sch311x_gpio_blocks[i].config_regs;
+		block->data_reg = sch311x_gpio_blocks[i].data_reg;
+		block->runtime_reg = pdata->runtime_reg;
+
+		err = gpiochip_add(&block->chip);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Could not register gpiochip, %d\n", err);
+			goto exit_err;
+		}
+		dev_info(&pdev->dev,
+			 "SMSC SCH311x GPIO block %d registered.\n", i);
+	}
+
+	return 0;
+
+exit_err:
+	release_region(pdata->runtime_reg + GP1, 6);
+	/* release already registered chips */
+	for (--i; i >= 0; i--)
+		gpiochip_remove(&priv->blocks[i].chip);
+	return err;
+}
+
+static int sch311x_gpio_remove(struct platform_device *pdev)
+{
+	struct sch311x_pdev_data *pdata = pdev->dev.platform_data;
+	struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev);
+	int err, i;
+
+	release_region(pdata->runtime_reg + GP1, 6);
+
+	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
+		err = gpiochip_remove(&priv->blocks[i].chip);
+		if (err)
+			return err;
+		dev_info(&pdev->dev,
+			 "SMSC SCH311x GPIO block %d unregistered.\n", i);
+	}
+	return 0;
+}
+
+static struct platform_driver sch311x_gpio_driver = {
+	.driver.name	= DRV_NAME,
+	.driver.owner	= THIS_MODULE,
+	.probe		= sch311x_gpio_probe,
+	.remove		= sch311x_gpio_remove,
+};
+
+
+/*
+ *	Init & exit routines
+ */
+
+static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
+{
+	int err = 0, reg;
+	unsigned short base_addr;
+	unsigned char dev_id;
+
+	err = sch311x_sio_enter(sio_config_port);
+	if (err)
+		return err;
+
+	/* Check device ID. We currently know about:
+	 * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */
+	reg = sch311x_sio_inb(sio_config_port, 0x20);
+	if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
+		err = -ENODEV;
+		goto exit;
+	}
+	dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6;
+
+	/* Select logical device A (runtime registers) */
+	sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
+
+	/* Check if Logical Device Register is currently active */
+	if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
+		pr_info("Seems that LDN 0x0a is not active...\n");
+
+	/* Get the base address of the runtime registers */
+	base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
+			   sch311x_sio_inb(sio_config_port, 0x61);
+	if (!base_addr) {
+		pr_err("Base address not set\n");
+		err = -ENODEV;
+		goto exit;
+	}
+	*addr = base_addr;
+
+	pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
+
+exit:
+	sch311x_sio_exit(sio_config_port);
+	return err;
+}
+
+static int __init sch311x_gpio_pdev_add(const unsigned short addr)
+{
+	struct sch311x_pdev_data pdata;
+	int err;
+
+	pdata.runtime_reg = addr;
+
+	sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1);
+	if (!sch311x_gpio_pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_data(sch311x_gpio_pdev,
+				       &pdata, sizeof(pdata));
+	if (err) {
+		pr_err(DRV_NAME "Platform data allocation failed\n");
+		goto err;
+	}
+
+	err = platform_device_add(sch311x_gpio_pdev);
+	if (err) {
+		pr_err(DRV_NAME "Device addition failed\n");
+		goto err;
+	}
+	return 0;
+
+err:
+	platform_device_put(sch311x_gpio_pdev);
+	return err;
+}
+
+static int __init sch311x_gpio_init(void)
+{
+	int err, i;
+	unsigned short addr = 0;
+
+	for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++)
+		if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
+			break;
+
+	if (!addr)
+		return -ENODEV;
+
+	err = platform_driver_register(&sch311x_gpio_driver);
+	if (err)
+		return err;
+
+	err = sch311x_gpio_pdev_add(addr);
+	if (err)
+		goto unreg_platform_driver;
+
+	return 0;
+
+unreg_platform_driver:
+	platform_driver_unregister(&sch311x_gpio_driver);
+	return err;
+}
+
+static void __exit sch311x_gpio_exit(void)
+{
+	platform_device_unregister(sch311x_gpio_pdev);
+	platform_driver_unregister(&sch311x_gpio_driver);
+}
+
+module_init(sch311x_gpio_init);
+module_exit(sch311x_gpio_exit);
+
+MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>");
+MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-sch311x");
diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c
index 88f374a..7c6c518 100644
--- a/drivers/gpio/gpio-sodaville.c
+++ b/drivers/gpio/gpio-sodaville.c
@@ -176,8 +176,10 @@
 
 	sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS,
 				sd->irq_base, 0, &irq_domain_sdv_ops, sd);
-	if (!sd->id)
+	if (!sd->id) {
+		ret = -ENODEV;
 		goto out_free_irq;
+	}
 	return 0;
 out_free_irq:
 	free_irq(pdev->irq, sd);
@@ -212,8 +214,10 @@
 	}
 
 	addr = pci_resource_start(pdev, GPIO_BAR);
-	if (!addr)
+	if (!addr) {
+		ret = -ENODEV;
 		goto release_reg;
+	}
 	sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR));
 
 	prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len);
@@ -270,7 +274,7 @@
 	kfree(sd);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(sdv_gpio_pci_ids) = {
+static const struct pci_device_id sdv_gpio_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) },
 	{ 0, },
 };
diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c
index f2fb12c..68e3fcb 100644
--- a/drivers/gpio/gpio-sta2x11.c
+++ b/drivers/gpio/gpio-sta2x11.c
@@ -146,7 +146,7 @@
 	gpio->dbg_show = NULL;
 	gpio->base = gpio_base;
 	gpio->ngpio = GSTA_NR_GPIO;
-	gpio->can_sleep = 0;
+	gpio->can_sleep = false;
 	gpio->to_irq = gsta_gpio_to_irq;
 
 	/*
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 2647e24..2776a09 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -129,7 +129,7 @@
 	.set			= stmpe_gpio_set,
 	.to_irq			= stmpe_gpio_to_irq,
 	.request		= stmpe_gpio_request,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
index d2983e9..13d73fb 100644
--- a/drivers/gpio/gpio-sx150x.c
+++ b/drivers/gpio/gpio-sx150x.c
@@ -436,7 +436,7 @@
 	chip->gpio_chip.set              = sx150x_gpio_set;
 	chip->gpio_chip.to_irq           = sx150x_gpio_to_irq;
 	chip->gpio_chip.base             = pdata->gpio_base;
-	chip->gpio_chip.can_sleep        = 1;
+	chip->gpio_chip.can_sleep        = true;
 	chip->gpio_chip.ngpio            = chip->dev_cfg->ngpios;
 	if (pdata->oscio_is_gpo)
 		++chip->gpio_chip.ngpio;
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index da071dd..07bce97 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -222,7 +222,7 @@
 	tb10x_gpio->gc.free		= tb10x_gpio_free;
 	tb10x_gpio->gc.base		= -1;
 	tb10x_gpio->gc.ngpio		= ngpio;
-	tb10x_gpio->gc.can_sleep	= 0;
+	tb10x_gpio->gc.can_sleep	= false;
 
 
 	ret = gpiochip_add(&tb10x_gpio->gc);
@@ -318,7 +318,7 @@
 	.remove		= tb10x_gpio_remove,
 	.driver = {
 		.name	= "tb10x-gpio",
-		.of_match_table = of_match_ptr(tb10x_gpio_dt_ids),
+		.of_match_table = tb10x_gpio_dt_ids,
 		.owner	= THIS_MODULE,
 	}
 };
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index ddb5fef..1019320 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -127,7 +127,7 @@
 	.direction_output	= tc3589x_gpio_direction_output,
 	.set			= tc3589x_gpio_set,
 	.to_irq			= tc3589x_gpio_to_irq,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int tc3589x_gpio_irq_set_type(struct irq_data *d, unsigned int type)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index cfd3b90..2b49f87 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -425,6 +425,7 @@
 	struct tegra_gpio_soc_config *config;
 	struct resource *res;
 	struct tegra_gpio_bank *bank;
+	int ret;
 	int gpio;
 	int i;
 	int j;
@@ -494,7 +495,11 @@
 
 	tegra_gpio_chip.of_node = pdev->dev.of_node;
 
-	gpiochip_add(&tegra_gpio_chip);
+	ret = gpiochip_add(&tegra_gpio_chip);
+	if (ret < 0) {
+		irq_domain_remove(irq_domain);
+		return ret;
+	}
 
 	for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
 		int irq = irq_create_mapping(irq_domain, gpio);
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
index 7a0e956..f9a8fbd 100644
--- a/drivers/gpio/gpio-timberdale.c
+++ b/drivers/gpio/gpio-timberdale.c
@@ -275,7 +275,7 @@
 	gc->dbg_show = NULL;
 	gc->base = pdata->gpio_base;
 	gc->ngpio = pdata->nr_pins;
-	gc->can_sleep = 0;
+	gc->can_sleep = false;
 
 	err = gpiochip_add(gc);
 	if (err)
@@ -290,8 +290,8 @@
 		return 0;
 
 	for (i = 0; i < pdata->nr_pins; i++) {
-		irq_set_chip_and_handler_name(tgpio->irq_base + i,
-			&timbgpio_irqchip, handle_simple_irq, "mux");
+		irq_set_chip_and_handler(tgpio->irq_base + i,
+			&timbgpio_irqchip, handle_simple_irq);
 		irq_set_chip_data(tgpio->irq_base + i, tgpio);
 #ifdef CONFIG_ARM
 		set_irq_flags(tgpio->irq_base + i, IRQF_VALID | IRQF_PROBE);
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
index 58445bb..4aa4815 100644
--- a/drivers/gpio/gpio-tnetv107x.c
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -176,7 +176,7 @@
 		ctlr = &chips[i];
 
 		ctlr->chip.label	= "tnetv107x";
-		ctlr->chip.can_sleep	= 0;
+		ctlr->chip.can_sleep	= false;
 		ctlr->chip.base		= base;
 		ctlr->chip.ngpio	= ngpio - base;
 		if (ctlr->chip.ngpio > 32)
diff --git a/drivers/gpio/gpio-tps6586x.c b/drivers/gpio/gpio-tps6586x.c
index 29e8e75..8994dfa 100644
--- a/drivers/gpio/gpio-tps6586x.c
+++ b/drivers/gpio/gpio-tps6586x.c
@@ -108,7 +108,7 @@
 	tps6586x_gpio->gpio_chip.label = pdev->name;
 	tps6586x_gpio->gpio_chip.dev = &pdev->dev;
 	tps6586x_gpio->gpio_chip.ngpio = 4;
-	tps6586x_gpio->gpio_chip.can_sleep = 1;
+	tps6586x_gpio->gpio_chip.can_sleep = true;
 
 	/* FIXME: add handling of GPIOs as dedicated inputs */
 	tps6586x_gpio->gpio_chip.direction_output = tps6586x_gpio_output;
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index 0614621..b6e818e 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -143,7 +143,7 @@
 	default:
 		return -EINVAL;
 	}
-	tps65910_gpio->gpio_chip.can_sleep = 1;
+	tps65910_gpio->gpio_chip.can_sleep = true;
 	tps65910_gpio->gpio_chip.direction_input = tps65910_gpio_input;
 	tps65910_gpio->gpio_chip.direction_output = tps65910_gpio_output;
 	tps65910_gpio->gpio_chip.set	= tps65910_gpio_set;
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 276a422..59ee486 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -79,7 +79,7 @@
 	.direction_output	= tps65912_gpio_output,
 	.get			= tps65912_gpio_get,
 	.set			= tps65912_gpio_set,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 	.ngpio			= 5,
 	.base			= -1,
 };
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index f999689..8b88ca2 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -396,7 +396,7 @@
 	.direction_output	= twl_direction_out,
 	.set			= twl_set,
 	.to_irq			= twl_to_irq,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 /*----------------------------------------------------------------------*/
diff --git a/drivers/gpio/gpio-twl6040.c b/drivers/gpio/gpio-twl6040.c
index d420d30..0caf5cd 100644
--- a/drivers/gpio/gpio-twl6040.c
+++ b/drivers/gpio/gpio-twl6040.c
@@ -77,7 +77,7 @@
 	.get			= twl6040gpo_get,
 	.direction_output	= twl6040gpo_direction_out,
 	.set			= twl6040gpo_set,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 /*----------------------------------------------------------------------*/
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 06fb5cf..2445fe7 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -64,7 +64,7 @@
 	ucb->gc.direction_output = ucb1400_gpio_dir_out;
 	ucb->gc.get = ucb1400_gpio_get;
 	ucb->gc.set = ucb1400_gpio_set;
-	ucb->gc.can_sleep = 1;
+	ucb->gc.can_sleep = true;
 
 	err = gpiochip_add(&ucb->gc);
 	if (err)
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
index 5ac2919..79e3b58 100644
--- a/drivers/gpio/gpio-viperboard.c
+++ b/drivers/gpio/gpio-viperboard.c
@@ -413,7 +413,7 @@
 	vb_gpio->gpioa.owner = THIS_MODULE;
 	vb_gpio->gpioa.base = -1;
 	vb_gpio->gpioa.ngpio = 16;
-	vb_gpio->gpioa.can_sleep = 1;
+	vb_gpio->gpioa.can_sleep = true;
 	vb_gpio->gpioa.set = vprbrd_gpioa_set;
 	vb_gpio->gpioa.get = vprbrd_gpioa_get;
 	vb_gpio->gpioa.direction_input = vprbrd_gpioa_direction_input;
@@ -430,7 +430,7 @@
 	vb_gpio->gpiob.owner = THIS_MODULE;
 	vb_gpio->gpiob.base = -1;
 	vb_gpio->gpiob.ngpio = 16;
-	vb_gpio->gpiob.can_sleep = 1;
+	vb_gpio->gpiob.can_sleep = true;
 	vb_gpio->gpiob.set = vprbrd_gpiob_set;
 	vb_gpio->gpiob.get = vprbrd_gpiob_get;
 	vb_gpio->gpiob.direction_input = vprbrd_gpiob_direction_input;
diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c
index cddfa22..0fd23b6 100644
--- a/drivers/gpio/gpio-vx855.c
+++ b/drivers/gpio/gpio-vx855.c
@@ -214,7 +214,7 @@
 	c->dbg_show = NULL;
 	c->base = 0;
 	c->ngpio = NR_VX855_GP;
-	c->can_sleep = 0;
+	c->can_sleep = false;
 	c->names = vx855gpio_names;
 }
 
diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
index 456000c..b18a1a2 100644
--- a/drivers/gpio/gpio-wm831x.c
+++ b/drivers/gpio/gpio-wm831x.c
@@ -240,7 +240,7 @@
 	.to_irq			= wm831x_gpio_to_irq,
 	.set_debounce		= wm831x_gpio_set_debounce,
 	.dbg_show		= wm831x_gpio_dbg_show,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int wm831x_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-wm8350.c b/drivers/gpio/gpio-wm8350.c
index fc49154..2487f9d 100644
--- a/drivers/gpio/gpio-wm8350.c
+++ b/drivers/gpio/gpio-wm8350.c
@@ -106,7 +106,7 @@
 	.direction_output	= wm8350_gpio_direction_out,
 	.set			= wm8350_gpio_set,
 	.to_irq			= wm8350_gpio_to_irq,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int wm8350_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c
index a53dbde..d93b6b5 100644
--- a/drivers/gpio/gpio-wm8994.c
+++ b/drivers/gpio/gpio-wm8994.c
@@ -242,7 +242,7 @@
 	.set			= wm8994_gpio_set,
 	.to_irq			= wm8994_gpio_to_irq,
 	.dbg_show		= wm8994_gpio_dbg_show,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int wm8994_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-xtensa.c b/drivers/gpio/gpio-xtensa.c
new file mode 100644
index 0000000..1d136ec
--- /dev/null
+++ b/drivers/gpio/gpio-xtensa.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2013 TangoTec Ltd.
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the Xtensa LX4 GPIO32 Option
+ *
+ * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
+ *
+ * GPIO32 is a standard optional extension to the Xtensa architecture core that
+ * provides preconfigured output and input ports for intra SoC signaling. The
+ * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
+ * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
+ * driver treats input and output states as two distinct devices.
+ *
+ * Access to GPIO32 specific instructions is controlled by the CPENABLE
+ * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
+ * disables access to all coprocessors. This driver sets the CPENABLE bit
+ * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
+ * CPENABLE state after that.
+ *
+ * This driver is currently incompatible with SMP. The GPIO32 extension is not
+ * guaranteed to be available in all cores. Moreover, each core controls a
+ * different set of IO wires. A theoretical SMP aware version of this driver
+ * would need to have a per core workqueue to do the actual GPIO manipulation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+
+#include <asm/coprocessor.h> /* CPENABLE read/write macros */
+
+#ifndef XCHAL_CP_ID_XTIOP
+#error GPIO32 option is not enabled for your xtensa core variant
+#endif
+
+static inline unsigned long enable_cp(unsigned long *cpenable)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	RSR_CPENABLE(*cpenable);
+	WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
+
+	return flags;
+}
+
+static inline void disable_cp(unsigned long flags, unsigned long cpenable)
+{
+	WSR_CPENABLE(cpenable);
+	local_irq_restore(flags);
+}
+
+static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	return 1; /* input only */
+}
+
+static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned long flags, saved_cpenable;
+	u32 impwire;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
+	disable_cp(flags, saved_cpenable);
+
+	return !!(impwire & BIT(offset));
+}
+
+static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
+				    int value)
+{
+	BUG(); /* output only; should never be called */
+}
+
+static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	return 0; /* output only */
+}
+
+static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned long flags, saved_cpenable;
+	u32 expstate;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
+	disable_cp(flags, saved_cpenable);
+
+	return !!(expstate & BIT(offset));
+}
+
+static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
+				     int value)
+{
+	unsigned long flags, saved_cpenable;
+	u32 mask = BIT(offset);
+	u32 val = value ? BIT(offset) : 0;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("wrmsk_expstate %0, %1"
+			     :: "a" (val), "a" (mask));
+	disable_cp(flags, saved_cpenable);
+}
+
+static struct gpio_chip impwire_chip = {
+	.label		= "impwire",
+	.base		= -1,
+	.ngpio		= 32,
+	.get_direction	= xtensa_impwire_get_direction,
+	.get		= xtensa_impwire_get_value,
+	.set		= xtensa_impwire_set_value,
+};
+
+static struct gpio_chip expstate_chip = {
+	.label		= "expstate",
+	.base		= -1,
+	.ngpio		= 32,
+	.get_direction	= xtensa_expstate_get_direction,
+	.get		= xtensa_expstate_get_value,
+	.set		= xtensa_expstate_set_value,
+};
+
+static int xtensa_gpio_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpiochip_add(&impwire_chip);
+	if (ret)
+		return ret;
+	return gpiochip_add(&expstate_chip);
+}
+
+static struct platform_driver xtensa_gpio_driver = {
+	.driver		= {
+		.name		= "xtensa-gpio",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= xtensa_gpio_probe,
+};
+
+static int __init xtensa_gpio_init(void)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return platform_driver_register(&xtensa_gpio_driver);
+}
+device_initcall(xtensa_gpio_init);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index ae0ffdc..716ee98 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -12,11 +12,13 @@
 
 #include <linux/errno.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/export.h>
-#include <linux/acpi_gpio.h>
 #include <linux/acpi.h>
 #include <linux/interrupt.h>
 
+#include "gpiolib.h"
+
 struct acpi_gpio_evt_pin {
 	struct list_head node;
 	acpi_handle *evt_handle;
@@ -94,7 +96,7 @@
  * gpio pins have acpi event methods and assigns interrupt handlers that calls
  * the acpi event methods for those pins.
  */
-void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
+static void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
 {
 	struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_resource *res;
@@ -192,7 +194,6 @@
 				irq);
 	}
 }
-EXPORT_SYMBOL(acpi_gpiochip_request_interrupts);
 
 /**
  * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts.
@@ -203,7 +204,7 @@
  * The remaining ACPI event interrupts associated with the chip are freed
  * automatically.
  */
-void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
+static void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
 {
 	acpi_handle handle;
 	acpi_status status;
@@ -230,7 +231,6 @@
 	acpi_detach_data(handle, acpi_gpio_evt_dh);
 	kfree(evt_pins);
 }
-EXPORT_SYMBOL(acpi_gpiochip_free_interrupts);
 
 struct acpi_gpio_lookup {
 	struct acpi_gpio_info info;
@@ -307,6 +307,15 @@
 	if (lookup.desc && info)
 		*info = lookup.info;
 
-	return lookup.desc ? lookup.desc : ERR_PTR(-ENODEV);
+	return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
 }
-EXPORT_SYMBOL_GPL(acpi_get_gpiod_by_index);
+
+void acpi_gpiochip_add(struct gpio_chip *chip)
+{
+	acpi_gpiochip_request_interrupts(chip);
+}
+
+void acpi_gpiochip_remove(struct gpio_chip *chip)
+{
+	acpi_gpiochip_free_interrupts(chip);
+}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index c8a7c81..50c4922 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -10,12 +10,13 @@
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
-#include <linux/acpi_gpio.h>
 #include <linux/idr.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <linux/gpio/driver.h>
 
+#include "gpiolib.h"
+
 #define CREATE_TRACE_POINTS
 #include <trace/events/gpio.h>
 
@@ -84,40 +85,57 @@
 static int gpiod_request(struct gpio_desc *desc, const char *label);
 static void gpiod_free(struct gpio_desc *desc);
 
+/* With descriptor prefix */
+
 #ifdef CONFIG_DEBUG_FS
-#define gpiod_emerg(desc, fmt, ...)			                \
-	pr_emerg("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+#define gpiod_emerg(desc, fmt, ...)					       \
+	pr_emerg("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\
                  ##__VA_ARGS__)
-#define gpiod_crit(desc, fmt, ...)			                \
-	pr_crit("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label,  \
+#define gpiod_crit(desc, fmt, ...)					       \
+	pr_crit("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
                  ##__VA_ARGS__)
-#define gpiod_err(desc, fmt, ...)				        \
-	pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label,   \
+#define gpiod_err(desc, fmt, ...)					       \
+	pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",  \
                  ##__VA_ARGS__)
-#define gpiod_warn(desc, fmt, ...)				        \
-	pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label,  \
+#define gpiod_warn(desc, fmt, ...)					       \
+	pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
                  ##__VA_ARGS__)
-#define gpiod_info(desc, fmt, ...)				        \
-	pr_info("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label,  \
+#define gpiod_info(desc, fmt, ...)					       \
+	pr_info("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
                 ##__VA_ARGS__)
-#define gpiod_dbg(desc, fmt, ...)				   \
-	pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+#define gpiod_dbg(desc, fmt, ...)					       \
+	pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\
                  ##__VA_ARGS__)
 #else
-#define gpiod_emerg(desc, fmt, ...)			           \
+#define gpiod_emerg(desc, fmt, ...)					\
 	pr_emerg("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
-#define gpiod_crit(desc, fmt, ...)			           \
+#define gpiod_crit(desc, fmt, ...)					\
 	pr_crit("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
-#define gpiod_err(desc, fmt, ...)				   \
+#define gpiod_err(desc, fmt, ...)					\
 	pr_err("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
-#define gpiod_warn(desc, fmt, ...)				   \
+#define gpiod_warn(desc, fmt, ...)					\
 	pr_warn("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
-#define gpiod_info(desc, fmt, ...)				   \
+#define gpiod_info(desc, fmt, ...)					\
 	pr_info("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
-#define gpiod_dbg(desc, fmt, ...)				   \
+#define gpiod_dbg(desc, fmt, ...)					\
 	pr_debug("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
 #endif
 
+/* With chip prefix */
+
+#define chip_emerg(chip, fmt, ...)					\
+	pr_emerg("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+#define chip_crit(chip, fmt, ...)					\
+	pr_crit("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+#define chip_err(chip, fmt, ...)					\
+	pr_err("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+#define chip_warn(chip, fmt, ...)					\
+	pr_warn("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+#define chip_info(chip, fmt, ...)					\
+	pr_info("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+#define chip_dbg(chip, fmt, ...)					\
+	pr_debug("GPIO chip %s: " fmt, chip->label, ##__VA_ARGS__)
+
 static inline void desc_set_label(struct gpio_desc *d, const char *label)
 {
 #ifdef CONFIG_DEBUG_FS
@@ -151,9 +169,10 @@
 static struct gpio_desc *gpiochip_offset_to_desc(struct gpio_chip *chip,
 						 unsigned int offset)
 {
-	unsigned int gpio = chip->base + offset;
+	if (offset >= chip->ngpio)
+		return ERR_PTR(-EINVAL);
 
-	return gpio_to_desc(gpio);
+	return &chip->desc[offset];
 }
 
 /**
@@ -187,7 +206,8 @@
 	if (WARN(test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0,
 			"autorequest GPIO-%d\n", gpio)) {
 		if (!try_module_get(chip->owner)) {
-			pr_err("GPIO-%d: module can't be gotten \n", gpio);
+			gpiod_err(desc, "%s: module can't be gotten\n",
+					__func__);
 			clear_bit(FLAG_REQUESTED, &desc->flags);
 			/* lose */
 			return -EIO;
@@ -808,8 +828,8 @@
 	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
 	     test_bit(FLAG_EXPORT, &desc->flags)) {
 		spin_unlock_irqrestore(&gpio_lock, flags);
-		pr_debug("%s: gpio %d unavailable (requested=%d, exported=%d)\n",
-				__func__, desc_to_gpio(desc),
+		gpiod_dbg(desc, "%s: unavailable (requested=%d, exported=%d)\n",
+				__func__,
 				test_bit(FLAG_REQUESTED, &desc->flags),
 				test_bit(FLAG_EXPORT, &desc->flags));
 		status = -EPERM;
@@ -857,8 +877,7 @@
 	device_unregister(dev);
 fail_unlock:
 	mutex_unlock(&sysfs_lock);
-	pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
-		 status);
+	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiod_export);
@@ -906,8 +925,7 @@
 	mutex_unlock(&sysfs_lock);
 
 	if (status)
-		pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
-			 status);
+		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 
 	return status;
 }
@@ -951,8 +969,7 @@
 	mutex_unlock(&sysfs_lock);
 
 	if (status)
-		pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
-			 status);
+		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 
 	return status;
 }
@@ -994,8 +1011,7 @@
 	}
 
 	if (status)
-		pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
-			 status);
+		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 }
 EXPORT_SYMBOL_GPL(gpiod_unexport);
 
@@ -1034,8 +1050,7 @@
 			chip->desc[gpio++].chip = NULL;
 		spin_unlock_irqrestore(&gpio_lock, flags);
 
-		pr_debug("%s: chip %s status %d\n", __func__,
-				chip->label, status);
+		chip_dbg(chip, "%s: status %d\n", __func__, status);
 	}
 
 	return status;
@@ -1051,15 +1066,14 @@
 	if (dev) {
 		put_device(dev);
 		device_unregister(dev);
-		chip->exported = 0;
+		chip->exported = false;
 		status = 0;
 	} else
 		status = -ENODEV;
 	mutex_unlock(&sysfs_lock);
 
 	if (status)
-		pr_debug("%s: chip %s status %d\n", __func__,
-				chip->label, status);
+		chip_dbg(chip, "%s: status %d\n", __func__, status);
 }
 
 static int __init gpiolib_sysfs_init(void)
@@ -1213,6 +1227,7 @@
 #endif
 
 	of_gpiochip_add(chip);
+	acpi_gpiochip_add(chip);
 
 	if (status)
 		goto fail;
@@ -1221,7 +1236,7 @@
 	if (status)
 		goto fail;
 
-	pr_debug("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
+	pr_debug("%s: registered GPIOs %d to %d on device: %s\n", __func__,
 		chip->base, chip->base + chip->ngpio - 1,
 		chip->label ? : "generic");
 
@@ -1231,7 +1246,7 @@
 	spin_unlock_irqrestore(&gpio_lock, flags);
 fail:
 	/* failures here can mean systems won't boot... */
-	pr_err("gpiochip_add: gpios %d..%d (%s) failed to register\n",
+	pr_err("%s: GPIOs %d..%d (%s) failed to register\n", __func__,
 		chip->base, chip->base + chip->ngpio - 1,
 		chip->label ? : "generic");
 	return status;
@@ -1254,6 +1269,7 @@
 
 	gpiochip_remove_pin_ranges(chip);
 	of_gpiochip_remove(chip);
+	acpi_gpiochip_remove(chip);
 
 	for (id = 0; id < chip->ngpio; id++) {
 		if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
@@ -1339,8 +1355,7 @@
 
 	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
 	if (!pin_range) {
-		pr_err("%s: GPIO chip: failed to allocate pin ranges\n",
-				chip->label);
+		chip_err(chip, "failed to allocate pin ranges\n");
 		return -ENOMEM;
 	}
 
@@ -1361,9 +1376,8 @@
 
 	pinctrl_add_gpio_range(pctldev, &pin_range->range);
 
-	pr_debug("GPIO chip %s: created GPIO range %d->%d ==> %s PINGRP %s\n",
-		 chip->label, gpio_offset,
-		 gpio_offset + pin_range->range.npins - 1,
+	chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n",
+		 gpio_offset, gpio_offset + pin_range->range.npins - 1,
 		 pinctrl_dev_get_devname(pctldev), pin_group);
 
 	list_add_tail(&pin_range->node, &chip->pin_ranges);
@@ -1390,8 +1404,7 @@
 
 	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
 	if (!pin_range) {
-		pr_err("%s: GPIO chip: failed to allocate pin ranges\n",
-				chip->label);
+		chip_err(chip, "failed to allocate pin ranges\n");
 		return -ENOMEM;
 	}
 
@@ -1406,13 +1419,12 @@
 			&pin_range->range);
 	if (IS_ERR(pin_range->pctldev)) {
 		ret = PTR_ERR(pin_range->pctldev);
-		pr_err("%s: GPIO chip: could not create pin range\n",
-		       chip->label);
+		chip_err(chip, "could not create pin range\n");
 		kfree(pin_range);
 		return ret;
 	}
-	pr_debug("GPIO chip %s: created GPIO range %d->%d ==> %s PIN %d->%d\n",
-		 chip->label, gpio_offset, gpio_offset + npins - 1,
+	chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
+		 gpio_offset, gpio_offset + npins - 1,
 		 pinctl_name,
 		 pin_offset, pin_offset + npins - 1);
 
@@ -1499,8 +1511,7 @@
 	}
 done:
 	if (status)
-		pr_debug("_gpio_request: gpio-%d (%s) status %d\n",
-			 desc_to_gpio(desc), label ? : "?", status);
+		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return status;
 }
@@ -1701,7 +1712,7 @@
 	if (!chip->get || !chip->direction_input) {
 		gpiod_warn(desc,
 			"%s: missing get() or direction_input() operations\n",
-			 __func__);
+			__func__);
 		return -EIO;
 	}
 
@@ -1721,7 +1732,8 @@
 	if (status) {
 		status = chip->request(chip, offset);
 		if (status < 0) {
-			gpiod_dbg(desc, "chip request fail, %d\n", status);
+			gpiod_dbg(desc, "%s: chip request fail, %d\n",
+					__func__, status);
 			/* and it's not available to anyone else ...
 			 * gpio_request() is the fully clean solution.
 			 */
@@ -1739,7 +1751,7 @@
 fail:
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	if (status)
-		gpiod_dbg(desc, "%s status %d\n", __func__, status);
+		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_input);
@@ -1806,7 +1818,8 @@
 	if (status) {
 		status = chip->request(chip, offset);
 		if (status < 0) {
-			gpiod_dbg(desc, "chip request fail, %d\n", status);
+			gpiod_dbg(desc, "%s: chip request fail, %d\n",
+					__func__, status);
 			/* and it's not available to anyone else ...
 			 * gpio_request() is the fully clean solution.
 			 */
@@ -2259,18 +2272,14 @@
 EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
 
 /**
- * gpiod_add_table() - register GPIO device consumers
- * @table: array of consumers to register
- * @num: number of consumers in table
+ * gpiod_add_lookup_table() - register GPIO device consumers
+ * @table: table of consumers to register
  */
-void gpiod_add_table(struct gpiod_lookup *table, size_t size)
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
 {
 	mutex_lock(&gpio_lookup_lock);
 
-	while (size--) {
-		list_add_tail(&table->list, &gpio_lookup_list);
-		table++;
-	}
+	list_add_tail(&table->list, &gpio_lookup_list);
 
 	mutex_unlock(&gpio_lookup_lock);
 }
@@ -2326,76 +2335,92 @@
 	return desc;
 }
 
+static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct gpiod_lookup_table *table;
+
+	mutex_lock(&gpio_lookup_lock);
+
+	list_for_each_entry(table, &gpio_lookup_list, list) {
+		if (table->dev_id && dev_id) {
+			/*
+			 * Valid strings on both ends, must be identical to have
+			 * a match
+			 */
+			if (!strcmp(table->dev_id, dev_id))
+				goto found;
+		} else {
+			/*
+			 * One of the pointers is NULL, so both must be to have
+			 * a match
+			 */
+			if (dev_id == table->dev_id)
+				goto found;
+		}
+	}
+	table = NULL;
+
+found:
+	mutex_unlock(&gpio_lookup_lock);
+	return table;
+}
+
 static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
 				    unsigned int idx,
 				    enum gpio_lookup_flags *flags)
 {
-	const char *dev_id = dev ? dev_name(dev) : NULL;
-	struct gpio_desc *desc = ERR_PTR(-ENODEV);
-	unsigned int match, best = 0;
+	struct gpio_desc *desc = ERR_PTR(-ENOENT);
+	struct gpiod_lookup_table *table;
 	struct gpiod_lookup *p;
 
-	mutex_lock(&gpio_lookup_lock);
+	table = gpiod_find_lookup_table(dev);
+	if (!table)
+		return desc;
 
-	list_for_each_entry(p, &gpio_lookup_list, list) {
-		match = 0;
+	for (p = &table->table[0]; p->chip_label; p++) {
+		struct gpio_chip *chip;
 
-		if (p->dev_id) {
-			if (!dev_id || strcmp(p->dev_id, dev_id))
-				continue;
-
-			match += 2;
-		}
-
-		if (p->con_id) {
-			if (!con_id || strcmp(p->con_id, con_id))
-				continue;
-
-			match += 1;
-		}
-
+		/* idx must always match exactly */
 		if (p->idx != idx)
 			continue;
 
-		if (match > best) {
-			struct gpio_chip *chip;
+		/* If the lookup entry has a con_id, require exact match */
+		if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
+			continue;
 
-			chip = find_chip_by_name(p->chip_label);
+		chip = find_chip_by_name(p->chip_label);
 
-			if (!chip) {
-				dev_warn(dev, "cannot find GPIO chip %s\n",
-					 p->chip_label);
-				continue;
-			}
-
-			if (chip->ngpio <= p->chip_hwnum) {
-				dev_warn(dev, "GPIO chip %s has %d GPIOs\n",
-					 chip->label, chip->ngpio);
-				continue;
-			}
-
-			desc = gpio_to_desc(chip->base + p->chip_hwnum);
-			*flags = p->flags;
-
-			if (match != 3)
-				best = match;
-			else
-				break;
+		if (!chip) {
+			dev_err(dev, "cannot find GPIO chip %s\n",
+				p->chip_label);
+			return ERR_PTR(-ENODEV);
 		}
-	}
 
-	mutex_unlock(&gpio_lookup_lock);
+		if (chip->ngpio <= p->chip_hwnum) {
+			dev_err(dev,
+				"requested GPIO %d is out of range [0..%d] for chip %s\n",
+				idx, chip->ngpio, chip->label);
+			return ERR_PTR(-EINVAL);
+		}
+
+		desc = gpiochip_offset_to_desc(chip, p->chip_hwnum);
+		*flags = p->flags;
+
+		return desc;
+	}
 
 	return desc;
 }
 
 /**
  * gpio_get - obtain a GPIO for a given GPIO function
- * @dev:	GPIO consumer
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
  * @con_id:	function within the GPIO consumer
  *
  * Return the GPIO descriptor corresponding to the function con_id of device
- * dev, or an IS_ERR() condition if an error occured.
+ * dev, -ENOENT if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occured while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id)
 {
@@ -2405,14 +2430,16 @@
 
 /**
  * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
- * @dev:	GPIO consumer
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
  * @con_id:	function within the GPIO consumer
  * @idx:	index of the GPIO to obtain in the consumer
  *
  * This variant of gpiod_get() allows to access GPIOs other than the first
  * defined one for functions that define several GPIOs.
  *
- * Return a valid GPIO descriptor, or an IS_ERR() condition in case of error.
+ * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occured while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
 					       const char *con_id,
@@ -2437,13 +2464,9 @@
 	 * Either we are not using DT or ACPI, or their lookup did not return
 	 * a result. In that case, use platform lookup as a fallback.
 	 */
-	if (!desc || IS_ERR(desc)) {
-		struct gpio_desc *pdesc;
+	if (!desc || desc == ERR_PTR(-ENOENT)) {
 		dev_dbg(dev, "using lookup tables for GPIO lookup");
-		pdesc = gpiod_find(dev, con_id, idx, &flags);
-		/* If used as fallback, do not replace the previous error */
-		if (!IS_ERR(pdesc) || !desc)
-			desc = pdesc;
+		desc = gpiod_find(dev, con_id, idx, &flags);
 	}
 
 	if (IS_ERR(desc)) {
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
new file mode 100644
index 0000000..82be586
--- /dev/null
+++ b/drivers/gpio/gpiolib.h
@@ -0,0 +1,46 @@
+/*
+ * Internal GPIO functions.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef GPIOLIB_H
+#define GPIOLIB_H
+
+#include <linux/err.h>
+#include <linux/device.h>
+
+/**
+ * struct acpi_gpio_info - ACPI GPIO specific information
+ * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
+ * @active_low: in case of @gpioint, the pin is active low
+ */
+struct acpi_gpio_info {
+	bool gpioint;
+	bool active_low;
+};
+
+#ifdef CONFIG_ACPI
+void acpi_gpiochip_add(struct gpio_chip *chip);
+void acpi_gpiochip_remove(struct gpio_chip *chip);
+
+struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
+					  struct acpi_gpio_info *info);
+#else
+static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
+static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { }
+
+static inline struct gpio_desc *
+acpi_get_gpiod_by_index(struct device *dev, int index,
+			struct acpi_gpio_info *info)
+{
+	return ERR_PTR(-ENOSYS);
+}
+#endif
+
+#endif /* GPIOLIB_H */
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 76483fb..87cf215 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -21,6 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 
 /* our context */
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2fce5ea..f237826 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -23,7 +23,9 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <plat/gpio-cfg.h>
 #include <mach/dma.h>
+#include <mach/gpio-samsung.h>
 
 #include <linux/platform_data/mmc-s3cmci.h>
 
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index ef19874..4ede230 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -31,10 +31,9 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/acpi.h>
-#include <linux/acpi_gpio.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
@@ -199,22 +198,23 @@
 	return IRQ_HANDLED;
 }
 
-static int sdhci_acpi_add_own_cd(struct device *dev, int gpio,
-				 struct mmc_host *mmc)
+static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
 {
+	struct gpio_desc *desc;
 	unsigned long flags;
 	int err, irq;
 
-	if (gpio < 0) {
-		err = gpio;
+	desc = devm_gpiod_get_index(dev, "sd_cd", 0);
+	if (IS_ERR(desc)) {
+		err = PTR_ERR(desc);
 		goto out;
 	}
 
-	err = devm_gpio_request_one(dev, gpio, GPIOF_DIR_IN, "sd_cd");
+	err = gpiod_direction_input(desc);
 	if (err)
-		goto out;
+		goto out_free;
 
-	irq = gpio_to_irq(gpio);
+	irq = gpiod_to_irq(desc);
 	if (irq < 0) {
 		err = irq;
 		goto out_free;
@@ -228,7 +228,7 @@
 	return 0;
 
 out_free:
-	devm_gpio_free(dev, gpio);
+	devm_gpiod_put(dev, desc);
 out:
 	dev_warn(dev, "failed to setup card detect wake up\n");
 	return err;
@@ -236,8 +236,7 @@
 
 #else
 
-static int sdhci_acpi_add_own_cd(struct device *dev, int gpio,
-				 struct mmc_host *mmc)
+static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
 {
 	return 0;
 }
@@ -254,7 +253,7 @@
 	struct resource *iomem;
 	resource_size_t len;
 	const char *hid;
-	int err, gpio;
+	int err;
 
 	if (acpi_bus_get_device(handle, &device))
 		return -ENODEV;
@@ -279,8 +278,6 @@
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
-	gpio = acpi_get_gpio_by_index(dev, 0, NULL);
-
 	c = sdhci_priv(host);
 	c->host = host;
 	c->slot = sdhci_acpi_get_slot(handle, hid);
@@ -338,7 +335,7 @@
 		goto err_free;
 
 	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
-		if (sdhci_acpi_add_own_cd(dev, gpio, host->mmc))
+		if (sdhci_acpi_add_own_cd(dev, host->mmc))
 			c->use_runtime_pm = false;
 	}
 
diff --git a/drivers/pinctrl/pinctrl-as3722.c b/drivers/pinctrl/pinctrl-as3722.c
index 01bffc1..b80f1e1 100644
--- a/drivers/pinctrl/pinctrl-as3722.c
+++ b/drivers/pinctrl/pinctrl-as3722.c
@@ -531,7 +531,7 @@
 	.direction_input	= as3722_gpio_direction_input,
 	.direction_output	= as3722_gpio_direction_output,
 	.to_irq			= as3722_gpio_to_irq,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 	.ngpio			= AS3722_PIN_NUM,
 	.base			= -1,
 };
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index a7549c4..9438051 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1527,7 +1527,7 @@
 	.set			= at91_gpio_set,
 	.to_irq			= at91_gpio_to_irq,
 	.dbg_show		= at91_gpio_dbg_show,
-	.can_sleep		= 0,
+	.can_sleep		= false,
 	.ngpio			= MAX_NB_GPIO_PER_BANK,
 };
 
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index 2832576..72e6a29 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -29,7 +29,6 @@
 #include <linux/gpio.h>
 #include <linux/irqdomain.h>
 #include <linux/acpi.h>
-#include <linux/acpi_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
@@ -461,7 +460,7 @@
 	gc->set = byt_gpio_set;
 	gc->dbg_show = byt_gpio_dbg_show;
 	gc->base = -1;
-	gc->can_sleep = 0;
+	gc->can_sleep = false;
 	gc->dev = dev;
 
 	ret = gpiochip_add(gc);
@@ -485,9 +484,6 @@
 
 		irq_set_handler_data(hwirq, vg);
 		irq_set_chained_handler(hwirq, byt_gpio_irq_handler);
-
-		/* Register interrupt handlers for gpio signaled acpi events */
-		acpi_gpiochip_request_interrupts(gc);
 	}
 
 	pm_runtime_enable(dev);
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index c05c1ef..3d907de 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -384,7 +384,7 @@
 	.to_irq = bcm2835_gpio_to_irq,
 	.base = -1,
 	.ngpio = BCM2835_NUM_GPIOS,
-	.can_sleep = 0,
+	.can_sleep = false,
 };
 
 static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 7111c3b..a21820f 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -904,7 +904,7 @@
 	.set			= nmk_gpio_set_output,
 	.to_irq			= nmk_gpio_to_irq,
 	.dbg_show		= nmk_gpio_dbg_show,
-	.can_sleep		= 0,
+	.can_sleep		= false,
 };
 
 void nmk_gpio_clocks_enable(void)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index 119d2dd..6b181cb 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -547,7 +547,7 @@
 	.of_xlate		= sunxi_pinctrl_gpio_of_xlate,
 	.to_irq			= sunxi_pinctrl_gpio_to_irq,
 	.of_gpio_n_cells	= 3,
-	.can_sleep		= 0,
+	.can_sleep		= false,
 };
 
 static int sunxi_pinctrl_irq_set_type(struct irq_data *d,
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index 39aec08..b28d1af 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -565,7 +565,7 @@
 	.direction_output = wmt_gpio_direction_output,
 	.get = wmt_gpio_get_value,
 	.set = wmt_gpio_set_value,
-	.can_sleep = 0,
+	.can_sleep = false,
 };
 
 int wmt_pinctrl_probe(struct platform_device *pdev,
diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h
deleted file mode 100644
index d875bc3..0000000
--- a/include/linux/acpi_gpio.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _LINUX_ACPI_GPIO_H_
-#define _LINUX_ACPI_GPIO_H_
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-
-/**
- * struct acpi_gpio_info - ACPI GPIO specific information
- * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
- * @active_low: in case of @gpioint, the pin is active low
- */
-struct acpi_gpio_info {
-	bool gpioint;
-	bool active_low;
-};
-
-#ifdef CONFIG_GPIO_ACPI
-
-struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
-					  struct acpi_gpio_info *info);
-void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
-void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
-
-#else /* CONFIG_GPIO_ACPI */
-
-static inline struct gpio_desc *
-acpi_get_gpiod_by_index(struct device *dev, int index,
-			struct acpi_gpio_info *info)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
-static inline void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
-
-#endif /* CONFIG_GPIO_ACPI */
-
-static inline int acpi_get_gpio_by_index(struct device *dev, int index,
-					 struct acpi_gpio_info *info)
-{
-	struct gpio_desc *desc = acpi_get_gpiod_by_index(dev, index, info);
-
-	if (IS_ERR(desc))
-		return PTR_ERR(desc);
-	return desc_to_gpio(desc);
-}
-
-#endif /* _LINUX_ACPI_GPIO_H_ */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 13dfd24..b581b13 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -90,7 +90,6 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/errno.h>
 #include <linux/bug.h>
 #include <linux/pinctrl/pinctrl.h>
 
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 3ea2cf6..a3e181e 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -39,14 +39,15 @@
  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
  *	handled is (base + ngpio - 1).
  * @desc: array of ngpio descriptors. Private.
- * @can_sleep: flag must be set iff get()/set() methods sleep, as they
- *	must while accessing GPIO expander chips over I2C or SPI
  * @names: if set, must be an array of strings to use as alternative
  *      names for the GPIOs in this chip. Any entry in the array
  *      may be NULL if there is no alias for the GPIO, however the
  *      array must be @ngpio entries long.  A name can include a single printk
  *      format specifier for an unsigned int.  It is substituted by the actual
  *      number of the gpio.
+ * @can_sleep: flag must be set iff get()/set() methods sleep, as they
+ *	must while accessing GPIO expander chips over I2C or SPI
+ * @exported: flags if the gpiochip is exported for use from sysfs. Private.
  *
  * A gpio_chip can help platforms abstract various sources of GPIOs so
  * they can all be accessed through a common programing interface.
@@ -91,8 +92,8 @@
 	u16			ngpio;
 	struct gpio_desc	*desc;
 	const char		*const *names;
-	unsigned		can_sleep:1;
-	unsigned		exported:1;
+	bool			can_sleep;
+	bool			exported;
 
 #if defined(CONFIG_OF_GPIO)
 	/*
@@ -136,59 +137,50 @@
 };
 
 /**
- * Lookup table for associating GPIOs to specific devices and functions using
- * platform data.
+ * struct gpiod_lookup - lookup table
+ * @chip_label: name of the chip the GPIO belongs to
+ * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
+ * @con_id: name of the GPIO from the device's point of view
+ * @idx: index of the GPIO in case several GPIOs share the same name
+ * @flags: mask of GPIO_* values
+ *
+ * gpiod_lookup is a lookup table for associating GPIOs to specific devices and
+ * functions using platform data.
  */
 struct gpiod_lookup {
-	struct list_head list;
-	/*
-	 * name of the chip the GPIO belongs to
-	 */
 	const char *chip_label;
-	/*
-	 * hardware number (i.e. relative to the chip) of the GPIO
-	 */
 	u16 chip_hwnum;
-	/*
-	 * name of device that can claim this GPIO
-	 */
-	const char *dev_id;
-	/*
-	 * name of the GPIO from the device's point of view
-	 */
 	const char *con_id;
-	/*
-	 * index of the GPIO in case several GPIOs share the same name
-	 */
 	unsigned int idx;
-	/*
-	 * mask of GPIO_* values
-	 */
 	enum gpio_lookup_flags flags;
 };
 
+struct gpiod_lookup_table {
+	struct list_head list;
+	const char *dev_id;
+	struct gpiod_lookup table[];
+};
+
 /*
  * Simple definition of a single GPIO under a con_id
  */
-#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _dev_id, _con_id, _flags) \
-	GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _dev_id, _con_id, 0, _flags)
+#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
+	GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
 
 /*
  * Use this macro if you need to have several GPIOs under the same con_id.
  * Each GPIO needs to use a different index and can be accessed using
  * gpiod_get_index()
  */
-#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _dev_id, _con_id, _idx, \
-			_flags)                                           \
+#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags)  \
 {                                                                         \
 	.chip_label = _chip_label,                                        \
 	.chip_hwnum = _chip_hwnum,                                        \
-	.dev_id = _dev_id,                                                \
 	.con_id = _con_id,                                                \
 	.idx = _idx,                                                      \
 	.flags = _flags,                                                  \
 }
 
-void gpiod_add_table(struct gpiod_lookup *table, size_t size);
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
 
 #endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/include/linux/platform_data/gpio-lpc32xx.h
similarity index 100%
rename from arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
rename to include/linux/platform_data/gpio-lpc32xx.h
diff --git a/include/linux/spi/74x164.h b/include/linux/spi/74x164.h
deleted file mode 100644
index 0aa6acc..0000000
--- a/include/linux/spi/74x164.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef LINUX_SPI_74X164_H
-#define LINUX_SPI_74X164_H
-
-struct gen_74x164_chip_platform_data {
-	/* number assigned to the first GPIO */
-	unsigned	base;
-};
-
-#endif
diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
index 5620d3c..bd2a5b9 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -25,15 +25,15 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
-#include <linux/acpi_gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <linux/rfkill-gpio.h>
 
 struct rfkill_gpio_data {
 	const char		*name;
 	enum rfkill_type	type;
-	int			reset_gpio;
-	int			shutdown_gpio;
+	struct gpio_desc	*reset_gpio;
+	struct gpio_desc	*shutdown_gpio;
 
 	struct rfkill		*rfkill_dev;
 	char			*reset_name;
@@ -48,19 +48,15 @@
 	struct rfkill_gpio_data *rfkill = data;
 
 	if (blocked) {
-		if (gpio_is_valid(rfkill->shutdown_gpio))
-			gpio_set_value(rfkill->shutdown_gpio, 0);
-		if (gpio_is_valid(rfkill->reset_gpio))
-			gpio_set_value(rfkill->reset_gpio, 0);
+		gpiod_set_value(rfkill->shutdown_gpio, 0);
+		gpiod_set_value(rfkill->reset_gpio, 0);
 		if (!IS_ERR(rfkill->clk) && rfkill->clk_enabled)
 			clk_disable(rfkill->clk);
 	} else {
 		if (!IS_ERR(rfkill->clk) && !rfkill->clk_enabled)
 			clk_enable(rfkill->clk);
-		if (gpio_is_valid(rfkill->reset_gpio))
-			gpio_set_value(rfkill->reset_gpio, 1);
-		if (gpio_is_valid(rfkill->shutdown_gpio))
-			gpio_set_value(rfkill->shutdown_gpio, 1);
+		gpiod_set_value(rfkill->reset_gpio, 1);
+		gpiod_set_value(rfkill->shutdown_gpio, 1);
 	}
 
 	rfkill->clk_enabled = blocked;
@@ -83,8 +79,6 @@
 
 	rfkill->name = dev_name(dev);
 	rfkill->type = (unsigned)id->driver_data;
-	rfkill->reset_gpio = acpi_get_gpio_by_index(dev, 0, NULL);
-	rfkill->shutdown_gpio = acpi_get_gpio_by_index(dev, 1, NULL);
 
 	return 0;
 }
@@ -94,8 +88,9 @@
 	struct rfkill_gpio_platform_data *pdata = pdev->dev.platform_data;
 	struct rfkill_gpio_data *rfkill;
 	const char *clk_name = NULL;
-	int ret = 0;
-	int len = 0;
+	struct gpio_desc *gpio;
+	int ret;
+	int len;
 
 	rfkill = devm_kzalloc(&pdev->dev, sizeof(*rfkill), GFP_KERNEL);
 	if (!rfkill)
@@ -109,28 +104,10 @@
 		clk_name = pdata->power_clk_name;
 		rfkill->name = pdata->name;
 		rfkill->type = pdata->type;
-		rfkill->reset_gpio = pdata->reset_gpio;
-		rfkill->shutdown_gpio = pdata->shutdown_gpio;
 	} else {
 		return -ENODEV;
 	}
 
-	/* make sure at-least one of the GPIO is defined and that
-	 * a name is specified for this instance */
-	if ((!gpio_is_valid(rfkill->reset_gpio) &&
-	     !gpio_is_valid(rfkill->shutdown_gpio)) || !rfkill->name) {
-		pr_warn("%s: invalid platform data\n", __func__);
-		return -EINVAL;
-	}
-
-	if (pdata && pdata->gpio_runtime_setup) {
-		ret = pdata->gpio_runtime_setup(pdev);
-		if (ret) {
-			pr_warn("%s: can't set up gpio\n", __func__);
-			return ret;
-		}
-	}
-
 	len = strlen(rfkill->name);
 	rfkill->reset_name = devm_kzalloc(&pdev->dev, len + 7, GFP_KERNEL);
 	if (!rfkill->reset_name)
@@ -145,20 +122,34 @@
 
 	rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
 
-	if (gpio_is_valid(rfkill->reset_gpio)) {
-		ret = devm_gpio_request_one(&pdev->dev, rfkill->reset_gpio,
-					    0, rfkill->reset_name);
-		if (ret) {
-			pr_warn("%s: failed to get reset gpio.\n", __func__);
+	gpio = devm_gpiod_get_index(&pdev->dev, rfkill->reset_name, 0);
+	if (!IS_ERR(gpio)) {
+		ret = gpiod_direction_output(gpio, 0);
+		if (ret)
 			return ret;
-		}
+		rfkill->reset_gpio = gpio;
 	}
 
-	if (gpio_is_valid(rfkill->shutdown_gpio)) {
-		ret = devm_gpio_request_one(&pdev->dev, rfkill->shutdown_gpio,
-					    0, rfkill->shutdown_name);
+	gpio = devm_gpiod_get_index(&pdev->dev, rfkill->shutdown_name, 1);
+	if (!IS_ERR(gpio)) {
+		ret = gpiod_direction_output(gpio, 0);
+		if (ret)
+			return ret;
+		rfkill->shutdown_gpio = gpio;
+	}
+
+	/* Make sure at-least one of the GPIO is defined and that
+	 * a name is specified for this instance
+	 */
+	if ((!rfkill->reset_gpio && !rfkill->shutdown_gpio) || !rfkill->name) {
+		dev_err(&pdev->dev, "invalid platform data\n");
+		return -EINVAL;
+	}
+
+	if (pdata && pdata->gpio_runtime_setup) {
+		ret = pdata->gpio_runtime_setup(pdev);
 		if (ret) {
-			pr_warn("%s: failed to get shutdown gpio.\n", __func__);
+			dev_err(&pdev->dev, "can't set up gpio\n");
 			return ret;
 		}
 	}