mac80211: disconnect when user changes channel
If we do not disconnect when a channel switch is requested,
we end up eventually detection beacon loss from the AP and
then disconnecting, without ever really telling the AP, so
we might just as well disconnect right away.
Additionally, this fixes a problem with iwlwifi where the
driver will clear some internal state on channel changes
like this and then get confused when we actually go clear
that state from mac80211.
It may look like this patch drops the no-IBSS check, but
that is already handled by cfg80211 in the wext handler it
provides for IBSS (cfg80211_ibss_wext_siwfreq).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f41fe1f..68eb505 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1101,7 +1101,6 @@
u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
struct ieee802_11_elems *elems,
u64 filter, u32 crc);
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e5de9ce..84e59b9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2223,7 +2223,10 @@
capa_mask, capa_val);
if (bss) {
- ieee80211_set_freq(sdata, bss->cbss.channel->center_freq);
+ local->oper_channel = bss->cbss.channel;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
+ ieee80211_hw_config(local, 0);
+
if (!(ifmgd->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(sdata, bss->ssid,
bss->ssid_len);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 66ce96a..915e777 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -774,31 +774,6 @@
dev_queue_xmit(skb);
}
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
-{
- int ret = -EINVAL;
- struct ieee80211_channel *chan;
- struct ieee80211_local *local = sdata->local;
-
- chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
-
- if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- chan->flags & IEEE80211_CHAN_NO_IBSS)
- return ret;
- local->oper_channel = chan;
- local->oper_channel_type = NL80211_CHAN_NO_HT;
-
- if (local->sw_scanning || local->hw_scanning)
- ret = 0;
- else
- ret = ieee80211_hw_config(
- local, IEEE80211_CONF_CHANGE_CHANNEL);
- }
-
- return ret;
-}
-
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index d2d81b1..1da81f4 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -55,6 +55,8 @@
struct iw_freq *freq, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_channel *chan;
if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
@@ -69,17 +71,38 @@
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(sdata,
+ chan = ieee80211_get_channel(local->hw.wiphy,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
- if (div > 0)
- return ieee80211_set_freq(sdata, freq->m / div);
- else
+ if (div <= 0)
return -EINVAL;
+ chan = ieee80211_get_channel(local->hw.wiphy, freq->m / div);
}
+
+ if (!chan)
+ return -EINVAL;
+
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+
+ /*
+ * no change except maybe auto -> fixed, ignore the HT
+ * setting so you can fix a channel you're on already
+ */
+ if (local->oper_channel == chan)
+ return 0;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ ieee80211_sta_req_auth(sdata);
+
+ local->oper_channel = chan;
+ local->oper_channel_type = NL80211_CHAN_NO_HT;
+ ieee80211_hw_config(local, 0);
+
+ return 0;
}