Bluetooth: Use explicit AMP controller id value for BR/EDR
The special AMP controller id 0 is reserved for the BR/EDR controller
that has the main link. It is a fixed value and so use a constant for
this throughout the code to make it more visible when the handling is
for the BR/EDR channel or when it is for the AMP channel.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 8e3076e..393eabc 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -64,7 +64,7 @@
#define HCI_AMP 0x01
/* First BR/EDR Controller shall have ID = 0 */
-#define HCI_BREDR_ID 0
+#define AMP_ID_BREDR 0x00
/* AMP controller types */
#define AMP_TYPE_BREDR 0x00
diff --git a/net/bluetooth/a2mp.c b/net/bluetooth/a2mp.c
index b2ef3d3..6d62d31 100644
--- a/net/bluetooth/a2mp.c
+++ b/net/bluetooth/a2mp.c
@@ -77,7 +77,7 @@
static inline void __a2mp_cl_bredr(struct a2mp_cl *cl)
{
- cl->id = 0;
+ cl->id = AMP_ID_BREDR;
cl->type = AMP_TYPE_BREDR;
cl->status = 1;
}
@@ -216,7 +216,7 @@
BT_DBG("Remote AMP id %d type %d status %d", cl->id, cl->type,
cl->status);
- if (cl->id != HCI_BREDR_ID && cl->type == HCI_AMP) {
+ if (cl->id != AMP_ID_BREDR && cl->type == HCI_AMP) {
struct a2mp_info_req req;
found = true;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 02dba4e..b0208e2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3046,8 +3046,8 @@
skb_queue_head_init(&chan->tx_q);
- chan->local_amp_id = 0;
- chan->move_id = 0;
+ chan->local_amp_id = AMP_ID_BREDR;
+ chan->move_id = AMP_ID_BREDR;
chan->move_state = L2CAP_MOVE_STABLE;
chan->move_role = L2CAP_MOVE_ROLE_NONE;
@@ -3100,7 +3100,7 @@
static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,
struct l2cap_conf_rfc *rfc)
{
- if (chan->local_amp_id && chan->hs_hcon) {
+ if (chan->local_amp_id != AMP_ID_BREDR && chan->hs_hcon) {
u64 ertm_to = chan->hs_hcon->hdev->amp_be_flush_to;
/* Class 1 devices have must have ERTM timeouts
@@ -3791,12 +3791,12 @@
* The connection will succeed after the
* physical link is up.
*/
- if (amp_id) {
- __l2cap_state_change(chan, BT_CONNECT2);
- result = L2CAP_CR_PEND;
- } else {
+ if (amp_id == AMP_ID_BREDR) {
__l2cap_state_change(chan, BT_CONFIG);
result = L2CAP_CR_SUCCESS;
+ } else {
+ __l2cap_state_change(chan, BT_CONNECT2);
+ result = L2CAP_CR_PEND;
}
status = L2CAP_CS_NO_INFO;
}
@@ -4423,7 +4423,7 @@
BT_DBG("psm 0x%2.2x, scid 0x%4.4x, amp_id %d", psm, scid, req->amp_id);
/* For controller id 0 make BR/EDR connection */
- if (req->amp_id == HCI_BREDR_ID) {
+ if (req->amp_id == AMP_ID_BREDR) {
l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
req->amp_id);
return 0;
@@ -4658,7 +4658,7 @@
if (chan->state != BT_CONNECTED) {
/* Ignore logical link if channel is on BR/EDR */
- if (chan->local_amp_id)
+ if (chan->local_amp_id != AMP_ID_BREDR)
l2cap_logical_finish_create(chan, hchan);
} else {
l2cap_logical_finish_move(chan, hchan);
@@ -4669,7 +4669,7 @@
{
BT_DBG("chan %p", chan);
- if (chan->local_amp_id == HCI_BREDR_ID) {
+ if (chan->local_amp_id == AMP_ID_BREDR) {
if (chan->chan_policy != BT_CHANNEL_POLICY_AMP_PREFERRED)
return;
chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
@@ -4868,7 +4868,7 @@
goto send_move_response;
}
- if (req->dest_amp_id) {
+ if (req->dest_amp_id != AMP_ID_BREDR) {
struct hci_dev *hdev;
hdev = hci_dev_get(req->dest_amp_id);
if (!hdev || hdev->dev_type != HCI_AMP ||
@@ -4898,7 +4898,7 @@
chan->move_id = req->dest_amp_id;
icid = chan->dcid;
- if (!req->dest_amp_id) {
+ if (req->dest_amp_id == AMP_ID_BREDR) {
/* Moving to BR/EDR */
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
@@ -5090,7 +5090,7 @@
if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM) {
if (result == L2CAP_MC_CONFIRMED) {
chan->local_amp_id = chan->move_id;
- if (!chan->local_amp_id)
+ if (chan->local_amp_id == AMP_ID_BREDR)
__release_logical_link(chan);
} else {
chan->move_id = chan->local_amp_id;
@@ -5130,7 +5130,7 @@
if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM_RSP) {
chan->local_amp_id = chan->move_id;
- if (!chan->local_amp_id && chan->hs_hchan)
+ if (chan->local_amp_id == AMP_ID_BREDR && chan->hs_hchan)
__release_logical_link(chan);
l2cap_move_done(chan);