| /* |
| * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ |
| * |
| * Setup and IRQ handling code for the HD64465 companion chip. |
| * by Greg Banks <gbanks@pocketpenguins.com> |
| * Copyright (c) 2000 PocketPenguins Inc |
| * |
| * Derived from setup_hd64461.c which bore the message: |
| * Copyright (C) 2000 YAEGASHI Takeshi |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #include <asm/hd64465/hd64465.h> |
| |
| static void disable_hd64465_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned short nimr; |
| unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); |
| |
| pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); |
| local_irq_save(flags); |
| nimr = inw(HD64465_REG_NIMR); |
| nimr |= mask; |
| outw(nimr, HD64465_REG_NIMR); |
| local_irq_restore(flags); |
| } |
| |
| |
| static void enable_hd64465_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| unsigned short nimr; |
| unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); |
| |
| pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); |
| local_irq_save(flags); |
| nimr = inw(HD64465_REG_NIMR); |
| nimr &= ~mask; |
| outw(nimr, HD64465_REG_NIMR); |
| local_irq_restore(flags); |
| } |
| |
| |
| static void mask_and_ack_hd64465(unsigned int irq) |
| { |
| disable_hd64465_irq(irq); |
| } |
| |
| |
| static void end_hd64465_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| enable_hd64465_irq(irq); |
| } |
| |
| |
| static unsigned int startup_hd64465_irq(unsigned int irq) |
| { |
| enable_hd64465_irq(irq); |
| return 0; |
| } |
| |
| |
| static void shutdown_hd64465_irq(unsigned int irq) |
| { |
| disable_hd64465_irq(irq); |
| } |
| |
| |
| static struct hw_interrupt_type hd64465_irq_type = { |
| .typename = "HD64465-IRQ", |
| .startup = startup_hd64465_irq, |
| .shutdown = shutdown_hd64465_irq, |
| .enable = enable_hd64465_irq, |
| .disable = disable_hd64465_irq, |
| .ack = mask_and_ack_hd64465, |
| .end = end_hd64465_irq, |
| }; |
| |
| |
| static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| printk(KERN_INFO |
| "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", |
| inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR)); |
| |
| return IRQ_NONE; |
| } |
| |
| |
| /*====================================================*/ |
| |
| /* |
| * Support for a secondary IRQ demux step. This is necessary |
| * because the HD64465 presents a very thin interface to the |
| * PCMCIA bus; a lot of features (such as remapping interrupts) |
| * normally done in hardware by other PCMCIA host bridges is |
| * instead done in software. |
| */ |
| static struct |
| { |
| int (*func)(int, void *); |
| void *dev; |
| } hd64465_demux[HD64465_IRQ_NUM]; |
| |
| void hd64465_register_irq_demux(int irq, |
| int (*demux)(int irq, void *dev), void *dev) |
| { |
| hd64465_demux[irq - HD64465_IRQ_BASE].func = demux; |
| hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev; |
| } |
| EXPORT_SYMBOL(hd64465_register_irq_demux); |
| |
| void hd64465_unregister_irq_demux(int irq) |
| { |
| hd64465_demux[irq - HD64465_IRQ_BASE].func = 0; |
| } |
| EXPORT_SYMBOL(hd64465_unregister_irq_demux); |
| |
| |
| |
| int hd64465_irq_demux(int irq) |
| { |
| if (irq == CONFIG_HD64465_IRQ) { |
| unsigned short i, bit; |
| unsigned short nirr = inw(HD64465_REG_NIRR); |
| unsigned short nimr = inw(HD64465_REG_NIMR); |
| |
| pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr); |
| nirr &= ~nimr; |
| for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++) |
| if (nirr & bit) |
| break; |
| |
| if (i < HD64465_IRQ_NUM) { |
| irq = HD64465_IRQ_BASE + i; |
| if (hd64465_demux[i].func != 0) |
| irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev); |
| } |
| } |
| return irq; |
| } |
| |
| static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL}; |
| |
| |
| static int __init setup_hd64465(void) |
| { |
| int i; |
| unsigned short rev; |
| unsigned short smscr; |
| |
| if (!MACH_HD64465) |
| return 0; |
| |
| printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n", |
| CONFIG_HD64465_IOBASE, |
| CONFIG_HD64465_IRQ, |
| HD64465_IRQ_BASE, |
| HD64465_IRQ_BASE+HD64465_IRQ_NUM-1); |
| |
| if (inw(HD64465_REG_SDID) != HD64465_SDID) { |
| printk(KERN_ERR "HD64465 device ID not found, check base address\n"); |
| } |
| |
| rev = inw(HD64465_REG_SRR); |
| printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff); |
| |
| outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */ |
| |
| for (i = 0; i < HD64465_IRQ_NUM ; i++) { |
| irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type; |
| } |
| |
| setup_irq(CONFIG_HD64465_IRQ, &irq0); |
| |
| #ifdef CONFIG_SERIAL |
| /* wake up the UART from STANDBY at this point */ |
| smscr = inw(HD64465_REG_SMSCR); |
| outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR); |
| |
| /* remap IO ports for first ISA serial port to HD64465 UART */ |
| hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); |
| #endif |
| |
| return 0; |
| } |
| |
| module_init(setup_hd64465); |