| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2000, 2001 Keith M Wesolowski |
| * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/types.h> |
| #include <asm/ip32/mace.h> |
| #include <asm/ip32/ip32_ints.h> |
| |
| #undef DEBUG_MACE_PCI |
| |
| /* |
| * Handle errors from the bridge. This includes master and target aborts, |
| * various command and address errors, and the interrupt test. This gets |
| * registered on the bridge error irq. It's conceivable that some of these |
| * conditions warrant a panic. Anybody care to say which ones? |
| */ |
| static irqreturn_t macepci_error(int irq, void *dev, struct pt_regs *regs) |
| { |
| char s; |
| unsigned int flags = mace->pci.error; |
| unsigned int addr = mace->pci.error_addr; |
| |
| if (flags & MACEPCI_ERROR_MEMORY_ADDR) |
| s = 'M'; |
| else if (flags & MACEPCI_ERROR_CONFIG_ADDR) |
| s = 'C'; |
| else |
| s = 'X'; |
| |
| if (flags & MACEPCI_ERROR_MASTER_ABORT) { |
| printk("MACEPCI: Master abort at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_MASTER_ABORT; |
| } |
| if (flags & MACEPCI_ERROR_TARGET_ABORT) { |
| printk("MACEPCI: Target abort at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_TARGET_ABORT; |
| } |
| if (flags & MACEPCI_ERROR_DATA_PARITY_ERR) { |
| printk("MACEPCI: Data parity error at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_DATA_PARITY_ERR; |
| } |
| if (flags & MACEPCI_ERROR_RETRY_ERR) { |
| printk("MACEPCI: Retry error at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_RETRY_ERR; |
| } |
| if (flags & MACEPCI_ERROR_ILLEGAL_CMD) { |
| printk("MACEPCI: Illegal command at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_ILLEGAL_CMD; |
| } |
| if (flags & MACEPCI_ERROR_SYSTEM_ERR) { |
| printk("MACEPCI: System error at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_SYSTEM_ERR; |
| } |
| if (flags & MACEPCI_ERROR_PARITY_ERR) { |
| printk("MACEPCI: Parity error at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_PARITY_ERR; |
| } |
| if (flags & MACEPCI_ERROR_OVERRUN) { |
| printk("MACEPCI: Overrun error at 0x%08x (%c)\n", addr, s); |
| flags &= ~MACEPCI_ERROR_OVERRUN; |
| } |
| if (flags & MACEPCI_ERROR_SIG_TABORT) { |
| printk("MACEPCI: Signaled target abort (clearing)\n"); |
| flags &= ~MACEPCI_ERROR_SIG_TABORT; |
| } |
| if (flags & MACEPCI_ERROR_INTERRUPT_TEST) { |
| printk("MACEPCI: Interrupt test triggered (clearing)\n"); |
| flags &= ~MACEPCI_ERROR_INTERRUPT_TEST; |
| } |
| |
| mace->pci.error = flags; |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| extern struct pci_ops mace_pci_ops; |
| #ifdef CONFIG_64BIT |
| static struct resource mace_pci_mem_resource = { |
| .name = "SGI O2 PCI MEM", |
| .start = MACEPCI_HI_MEMORY, |
| .end = 0x2FFFFFFFFUL, |
| .flags = IORESOURCE_MEM, |
| }; |
| static struct resource mace_pci_io_resource = { |
| .name = "SGI O2 PCI IO", |
| .start = 0x00000000UL, |
| .end = 0xffffffffUL, |
| .flags = IORESOURCE_IO, |
| }; |
| #define MACE_PCI_MEM_OFFSET 0x200000000 |
| #else |
| static struct resource mace_pci_mem_resource = { |
| .name = "SGI O2 PCI MEM", |
| .start = MACEPCI_LOW_MEMORY, |
| .end = MACEPCI_LOW_MEMORY + 0x2000000 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| static struct resource mace_pci_io_resource = { |
| .name = "SGI O2 PCI IO", |
| .start = 0x00000000, |
| .end = 0xFFFFFFFF, |
| .flags = IORESOURCE_IO, |
| }; |
| #define MACE_PCI_MEM_OFFSET (MACEPCI_LOW_MEMORY - 0x80000000) |
| #endif |
| static struct pci_controller mace_pci_controller = { |
| .pci_ops = &mace_pci_ops, |
| .mem_resource = &mace_pci_mem_resource, |
| .io_resource = &mace_pci_io_resource, |
| .iommu = 0, |
| .mem_offset = MACE_PCI_MEM_OFFSET, |
| .io_offset = 0, |
| }; |
| |
| static int __init mace_init(void) |
| { |
| PCIBIOS_MIN_IO = 0x1000; |
| |
| /* Clear any outstanding errors and enable interrupts */ |
| mace->pci.error_addr = 0; |
| mace->pci.error = 0; |
| mace->pci.control = 0xff008500; |
| |
| printk("MACE PCI rev %d\n", mace->pci.rev); |
| |
| BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0, |
| "MACE PCI error", NULL)); |
| |
| iomem_resource = mace_pci_mem_resource; |
| ioport_resource = mace_pci_io_resource; |
| |
| register_pci_controller(&mace_pci_controller); |
| |
| return 0; |
| } |
| |
| arch_initcall(mace_init); |