diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 557bec5..5fab4e6e 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -157,19 +157,6 @@
 
 comment "User Modules And Translation Layers"
 
-config MTD_CHAR
-	tristate "Direct char device access to MTD devices"
-	help
-	  This provides a character device for each MTD device present in
-	  the system, allowing the user to read and write directly to the
-	  memory chips, and also use ioctl() to obtain information about
-	  the device, or to erase parts of it.
-
-config HAVE_MTD_OTP
-	bool
-	help
-	  Enable access to OTP regions using MTD_CHAR.
-
 config MTD_BLKDEVS
 	tristate "Common interface to block layer for MTD 'translation layers'"
 	depends on BLOCK
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 18a38e5..4cfb31e 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -4,7 +4,7 @@
 
 # Core functionality.
 obj-$(CONFIG_MTD)		+= mtd.o
-mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
+mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
 
 obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
@@ -15,7 +15,6 @@
 obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
 
 # 'Users' - code which presents functionality to userspace.
-obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
 obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
 obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
 obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index c219e3d..e4696b3 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -146,7 +146,6 @@
 config MTD_OTP
 	bool "Protection Registers aka one-time programmable (OTP) bits"
 	depends on MTD_CFI_ADV_OPTIONS
-	select HAVE_MTD_OTP
 	default n
 	help
 	  This enables support for reading, writing and locking so called
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index ec4a2cc..2a4d55e 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -71,7 +71,6 @@
 config MTD_DATAFLASH_OTP
 	bool "DataFlash OTP support (Security Register)"
 	depends on MTD_DATAFLASH
-	select HAVE_MTD_OTP
 	help
 	  Newer DataFlash chips (revisions C and D) support 128 bytes of
 	  one-time-programmable (OTP) data.  The first half may be written
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index c729252..e0e59bf 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -38,6 +38,8 @@
 
 #include <asm/uaccess.h>
 
+#include "mtdcore.h"
+
 static DEFINE_MUTEX(mtd_mutex);
 
 /*
@@ -365,7 +367,6 @@
 	wake_up((wait_queue_head_t *)instr->priv);
 }
 
-#ifdef CONFIG_HAVE_MTD_OTP
 static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
 {
 	struct mtd_info *mtd = mfi->mtd;
@@ -395,9 +396,6 @@
 
 	return 0;
 }
-#else
-# define otp_select_filemode(f,m)	-EOPNOTSUPP
-#endif
 
 static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
 	uint64_t start, uint32_t length, void __user *ptr,
@@ -890,7 +888,6 @@
 		break;
 	}
 
-#ifdef CONFIG_HAVE_MTD_OTP
 	case OTPSELECT:
 	{
 		int mode;
@@ -946,7 +943,6 @@
 		ret = mtd_lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
-#endif
 
 	/* This ioctl is being deprecated - it truncates the ECC layout */
 	case ECCGETLAYOUT:
@@ -1242,7 +1238,7 @@
 };
 MODULE_ALIAS_FS("mtd_inodefs");
 
-static int __init init_mtdchar(void)
+int __init init_mtdchar(void)
 {
 	int ret;
 
@@ -1268,18 +1264,10 @@
 	return ret;
 }
 
-static void __exit cleanup_mtdchar(void)
+void __exit cleanup_mtdchar(void)
 {
 	unregister_filesystem(&mtd_inodefs_type);
 	__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
 }
 
-module_init(init_mtdchar);
-module_exit(cleanup_mtdchar);
-
-MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Direct character-device access to MTD devices");
 MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 91c2efd..71877ff 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -41,6 +41,7 @@
 #include <linux/mtd/partitions.h>
 
 #include "mtdcore.h"
+
 /*
  * backing device capabilities for non-mappable devices (such as NAND flash)
  * - permits private mappings, copies are taken of the data
@@ -96,11 +97,7 @@
 static LIST_HEAD(mtd_notifiers);
 
 
-#if defined(CONFIG_MTD_CHAR) || defined(CONFIG_MTD_CHAR_MODULE)
 #define MTD_DEVT(index) MKDEV(MTD_CHAR_MAJOR, (index)*2)
-#else
-#define MTD_DEVT(index) 0
-#endif
 
 /* REVISIT once MTD uses the driver model better, whoever allocates
  * the mtd_info will probably want to use the release() hook...
@@ -1185,8 +1182,15 @@
 
 	proc_mtd = proc_create("mtd", 0, NULL, &mtd_proc_ops);
 
+	ret = init_mtdchar();
+	if (ret)
+		goto out_procfs;
+
 	return 0;
 
+out_procfs:
+	if (proc_mtd)
+		remove_proc_entry("mtd", NULL);
 err_bdi3:
 	bdi_destroy(&mtd_bdi_ro_mappable);
 err_bdi2:
@@ -1200,6 +1204,7 @@
 
 static void __exit cleanup_mtd(void)
 {
+	cleanup_mtdchar();
 	if (proc_mtd)
 		remove_proc_entry("mtd", NULL);
 	class_unregister(&mtd_class);
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 9b10fed..7b03533 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -1,6 +1,6 @@
 /*
- * These are exported solely for the purpose of mtd_blkdevs.c. You
- * should not use them for _anything_ else.
+ * These are exported solely for the purpose of mtd_blkdevs.c and mtdchar.c.
+ * You should not use them for _anything_ else.
  */
 
 extern struct mutex mtd_table_mutex;
@@ -14,6 +14,9 @@
 			 struct mtd_partition **pparts,
 			 struct mtd_part_parser_data *data);
 
+int __init init_mtdchar(void);
+void __exit cleanup_mtdchar(void);
+
 #define mtd_for_each_device(mtd)			\
 	for ((mtd) = __mtd_next_device(0);		\
 	     (mtd) != NULL;				\
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 91467bb..eac7bb2 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -40,7 +40,6 @@
 
 config MTD_ONENAND_OTP
 	bool "OneNAND OTP Support"
-	select HAVE_MTD_OTP
 	help
 	  One Block of the NAND Flash Array memory is reserved as
 	  a One-Time Programmable Block memory area.