diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
index e49c5b6..1ab332e 100644
--- a/arch/arm/plat-pxa/include/plat/sdhci.h
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d70..31ae07a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1559,7 +1559,7 @@
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f..77f93c3 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad105..efef5f9 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -560,6 +562,20 @@
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +584,6 @@
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*
@@ -718,16 +731,21 @@
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7a..203da44 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079..5d46021 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca1..9b82910 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -133,10 +141,8 @@
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746ba..3d9c246 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
@@ -637,6 +645,7 @@
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +666,11 @@
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index fc406ac..5a61208 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -141,6 +141,10 @@
 	if (pdata->quirks)
 		host->quirks |= pdata->quirks;
 
+	/* If slot design supports 8 bit data, indicate this to MMC. */
+	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee..a25db42 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,18 +1185,32 @@
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
-
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
-
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
 	    && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
@@ -1681,6 +1695,16 @@
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
@@ -1845,11 +1869,19 @@
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  Boards that support
+	 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+	 * their platform code before calling sdhci_add_host(), and we
+	 * won't assume 8-bit width for hosts without that CAP.
+	 */
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b..e42d7f0 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -152,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -212,6 +216,8 @@
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a..f8f65df 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68..30f6fad 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,6 +168,7 @@
 						/* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe9..d369b53 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2441,6 +2441,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062