| /* |
| * driver/muic/s2mu205.c - S2MU205 micro USB switch device driver |
| * |
| * Copyright (C) 2019 Samsung Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| #define pr_fmt(fmt) "[MUIC] " fmt |
| |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/muic/muic.h> |
| #include <linux/mfd/samsung/s2mu205.h> |
| #include <linux/muic/s2mu205-muic.h> |
| |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| #include <linux/muic/muic_sysfs.h> |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MUIC_NOTIFIER) |
| #include <linux/muic/muic_notifier.h> |
| #endif |
| |
| #if IS_ENABLED(CONFIG_USB_HOST_NOTIFY) |
| #include <linux/usb_notify.h> |
| #endif |
| #include <linux/muic/muic_interface.h> |
| |
| #if IS_ENABLED(CONFIG_CCIC_NOTIFIER) |
| #include <linux/ccic/ccic_notifier.h> |
| #endif |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| #include <linux/vbus_notifier.h> |
| #endif |
| #if IS_ENABLED(CONFIG_MUIC_UART_SWITCH) |
| #include <mach/pinctrl-samsung.h> |
| #endif |
| #if IS_ENABLED(CONFIG_CP_UART_NOTI) |
| #include <soc/samsung/exynos-modem-ctrl.h> |
| #endif |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| #include <linux/fb.h> |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| #include <linux/sec_batt.h> |
| #endif |
| #endif |
| |
| /* Prototypes of the Static symbols of s2mu205-muic */ |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| static void s2mu205_muic_detect_dev_ccic(struct s2mu205_muic_data *muic_data, |
| muic_attached_dev_t new_dev); |
| int s2mu205_muic_bcd_rescan(struct s2mu205_muic_data *muic_data); |
| #endif |
| static int s2mu205_muic_detect_dev_bc1p2(struct s2mu205_muic_data *muic_data); |
| static void s2mu205_muic_handle_attached_dev(struct s2mu205_muic_data *muic_data); |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| static void s2mu205_muic_set_water_state(struct s2mu205_muic_data *muic_data, bool en); |
| static void s2mu205_muic_set_rid_for_water(struct s2mu205_muic_data *muic_data, bool en); |
| static void s2mu205_muic_set_rid_int_mask_en(struct s2mu205_muic_data *muic_data, bool en); |
| #endif |
| void s2mu205_muic_get_detect_info(struct s2mu205_muic_data *muic_data); |
| |
| /* |
| * Debuging functions |
| */ |
| static const char *dev_to_str(muic_attached_dev_t n) |
| { |
| char *ret; |
| |
| switch (n) { |
| ENUM_STR(ATTACHED_DEV_NONE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_USB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_CDP_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_OTG_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TA_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_TA_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_ID_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_ID_TA_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_ID_ANY_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_ID_USB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNOFFICIAL_ID_CDP_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNDEFINED_CHARGING_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_DESKDOCK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNKNOWN_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_DESKDOCK_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_CARDOCK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_OFF_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_OFF_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_OFF_VB_OTG_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_OFF_VB_FG_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_ON_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_UART_ON_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_USB_OFF_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_JIG_USB_ON_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_SMARTDOCK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_SMARTDOCK_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_SMARTDOCK_TA_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_SMARTDOCK_USB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNIVERSAL_MMDOCK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AUDIODOCK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_MHL_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_CHARGING_CABLE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_PREPARE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_PREPARE_DUPLI_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_5V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_5V_DUPLI_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_9V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_ERR_V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_ERR_V_DUPLI_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_QC_CHARGER_PREPARE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_QC_CHARGER_5V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_QC_CHARGER_ERR_V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_QC_CHARGER_9V_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_HV_ID_ERR_UNDEFINED_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_HV_ID_ERR_UNSUPPORTED_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_HV_ID_ERR_SUPPORTED_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_HMT_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_VZW_ACC_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_VZW_INCOMPATIBLE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_USB_LANHUB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TYPE2_CHG_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TYPE3_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TYPE3_MUIC_TA, ret); |
| ENUM_STR(ATTACHED_DEV_TYPE3_ADAPTER_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TYPE3_CHARGER_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_NONE_TYPE3_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNSUPPORTED_ID_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNSUPPORTED_ID_VB_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_TIMEOUT_OPEN_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_WIRELESS_PAD_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_POWERPACK_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNDEFINED_RANGE_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_CHK_WATER_REQ, ret); |
| ENUM_STR(ATTACHED_DEV_CHK_WATER_DRY_REQ, ret); |
| ENUM_STR(ATTACHED_DEV_GAMEPAD_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_CHECK_OCP, ret); |
| ENUM_STR(ATTACHED_DEV_RDU_TA_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_AFC_CHARGER_9V_DUPLI_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_UNKNOWN_MUIC, ret); |
| ENUM_STR(ATTACHED_DEV_NUM, ret); |
| default: |
| return "invalid"; |
| } |
| return ret; |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_DEBUG) |
| #define MAX_LOG 25 |
| #define READ 0 |
| #define WRITE 1 |
| |
| static u8 s2mu205_log_cnt; |
| static u8 s2mu205_log[MAX_LOG][3]; |
| |
| static void s2mu205_reg_log(u8 reg, u8 value, u8 rw) |
| { |
| s2mu205_log[s2mu205_log_cnt][0] = reg; |
| s2mu205_log[s2mu205_log_cnt][1] = value; |
| s2mu205_log[s2mu205_log_cnt][2] = rw; |
| s2mu205_log_cnt++; |
| if (s2mu205_log_cnt >= MAX_LOG) |
| s2mu205_log_cnt = 0; |
| } |
| |
| static void s2mu205_print_reg_log(void) |
| { |
| int i; |
| u8 reg, value, rw; |
| char mesg[256] = ""; |
| |
| for (i = 0; i < MAX_LOG; i++) { |
| reg = s2mu205_log[s2mu205_log_cnt][0]; |
| value = s2mu205_log[s2mu205_log_cnt][1]; |
| rw = s2mu205_log[s2mu205_log_cnt][2]; |
| s2mu205_log_cnt++; |
| |
| if (s2mu205_log_cnt >= MAX_LOG) |
| s2mu205_log_cnt = 0; |
| sprintf(mesg + strlen(mesg), "%x(%x)%x ", reg, value, rw); |
| } |
| pr_info("%s %s\n", __func__, mesg); |
| } |
| |
| void s2mu205_read_reg_dump(struct s2mu205_muic_data *muic, char *mesg) |
| { |
| u8 val; |
| |
| mutex_lock(&muic->muic_mutex); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MUIC_CTRL1, &val); |
| sprintf(mesg + strlen(mesg), "CTRL1:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MANUAL_SW_CTRL, &val); |
| sprintf(mesg + strlen(mesg), "SW_CTRL:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MUIC_INT1_MASK, &val); |
| sprintf(mesg + strlen(mesg), "IM1:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MUIC_INT2_MASK, &val); |
| sprintf(mesg + strlen(mesg), "IM2:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_CHG_TYP, &val); |
| sprintf(mesg + strlen(mesg), "CHG_T:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_DEVICE_APPLE, &val); |
| sprintf(mesg + strlen(mesg), "APPLE_DT:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_ADC_VALUE, &val); |
| sprintf(mesg + strlen(mesg), "ADC:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_DEVICE_TYP1, &val); |
| sprintf(mesg + strlen(mesg), "DT1:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_DEVICE_TYP2, &val); |
| sprintf(mesg + strlen(mesg), "DT2:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_DEVICE_TYP3, &val); |
| sprintf(mesg + strlen(mesg), "DT3:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MANUAL_SW_CTRL, &val); |
| sprintf(mesg + strlen(mesg), "SW_CTRL:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MUIC_INT1, &val); |
| sprintf(mesg + strlen(mesg), "INT1:%x ", val); |
| s2mu205_read_reg(muic->i2c, S2MU205_REG_MUIC_INT2, &val); |
| sprintf(mesg + strlen(mesg), "INT2:%x ", val); |
| mutex_unlock(&muic->muic_mutex); |
| } |
| |
| void s2mu205_print_reg_dump(struct s2mu205_muic_data *muic_data) |
| { |
| char mesg[256] = ""; |
| s2mu205_read_reg_dump(muic_data, mesg); |
| pr_info("%s %s\n", __func__, mesg); |
| } |
| |
| void s2mu205_read_reg_dump_otp(struct s2mu205_muic_data *muic_data) |
| { |
| int i; |
| u8 val; |
| pr_info("%s=======================START\n", __func__); |
| for (i = 0x6D; i <= 0xD9; i++) { |
| s2mu205_read_reg(muic_data->i2c, i, &val); |
| pr_info("0x%X : 0x%X\n", i, val); |
| } |
| pr_info("%s=======================END\n", __func__); |
| } |
| #endif |
| |
| /* |
| * Unit Functions |
| */ |
| int s2mu205_i2c_read_byte(struct i2c_client *client, u8 command) |
| { |
| int ret = 0; |
| int retry = 0; |
| u8 data = 0; |
| |
| ret = s2mu205_read_reg(client, command, &data); |
| while (ret < 0) { |
| pr_info("failed to read reg(0x%x) retry(%d)\n", command, retry); |
| if (retry > 10) { |
| pr_err("%s retry failed!!\n", __func__); |
| break; |
| } |
| msleep(100); |
| ret = s2mu205_read_reg(client, command, &data); |
| retry++; |
| } |
| |
| #if IS_ENABLED(DEBUG_MUIC) |
| s2mu205_reg_log(command, ret, retry << 1 | READ); |
| #endif |
| return data; |
| } |
| |
| int s2mu205_i2c_write_byte(struct i2c_client *client, u8 command, u8 value) |
| { |
| int ret_r = 0; |
| int ret_w = 0; |
| int retry = 0; |
| u8 written = 0; |
| |
| ret_w = s2mu205_write_reg(client, command, value); |
| while (ret_w < 0) { |
| pr_info("failed to write reg(0x%x) retry(%d)\n", command, retry); |
| ret_r = s2mu205_read_reg(client, command, &written); |
| if (ret_r < 0) |
| pr_err("%s reg(0x%x)\n", __func__, command); |
| msleep(100); |
| ret_w = s2mu205_write_reg(client, command, value); |
| retry++; |
| } |
| #if IS_ENABLED(DEBUG_MUIC) |
| s2mu205_reg_log(command, value, retry << 1 | WRITE); |
| #endif |
| return ret_w; |
| } |
| |
| static int _s2mu205_i2c_guaranteed_wbyte(struct i2c_client *client, |
| u8 command, u8 value) |
| { |
| int ret; |
| int retry = 0; |
| int written; |
| |
| ret = s2mu205_i2c_write_byte(client, command, value); |
| written = s2mu205_i2c_read_byte(client, command); |
| while (written != value) { |
| pr_info("reg(0x%x): written(0x%x) != value(0x%x)\n", |
| command, written, value); |
| if (retry > 10) { |
| pr_err("%s retry failed!!\n", __func__); |
| break; |
| } |
| msleep(100); |
| retry++; |
| ret = s2mu205_i2c_write_byte(client, command, value); |
| written = s2mu205_i2c_read_byte(client, command); |
| } |
| return ret; |
| } |
| |
| static int _s2mu205_i2c_update_bit(struct i2c_client *i2c, u8 reg, |
| u8 mask, u8 shift, u8 value) |
| { |
| int ret; |
| u8 reg_val = 0; |
| |
| reg_val = s2mu205_i2c_read_byte(i2c, reg); |
| reg_val &= ~mask; |
| reg_val |= value << shift; |
| ret = s2mu205_i2c_write_byte(i2c, reg, reg_val); |
| pr_info("%s reg(0x%x) value(0x%x)\n", __func__, reg, reg_val); |
| if (ret < 0) |
| pr_err("%s Reg = 0x%X, mask = 0x%X, val = 0x%X write err : %d\n", |
| __func__, reg, mask, value, ret); |
| |
| return ret; |
| } |
| |
| static void _s2mu205_muic_set_chg_det(struct s2mu205_muic_data *muic_data, |
| bool enable) |
| { |
| struct i2c_client *i2c = muic_data->i2c; |
| u8 r_val = 0, w_val = 0; |
| |
| r_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_RID_DISCHARGE); |
| if (enable) { |
| w_val = r_val & ~(RID_DISCHARGE_CHG_DET_OFF_MASK); |
| } else { |
| w_val = r_val | RID_DISCHARGE_CHG_DET_OFF_MASK; |
| } |
| if(w_val != r_val) { |
| pr_info("%s en(%d)\n", __func__, enable); |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_RID_DISCHARGE, w_val); |
| } |
| } |
| |
| static int _s2mu205_muic_sel_path(struct s2mu205_muic_data *muic_data, |
| t_path_data path_data) |
| { |
| int ret = 0; |
| u8 reg_val1, reg_val2; |
| |
| reg_val1 = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MANUAL_SW_CTRL); |
| reg_val2 = reg_val1 & ~(MANUAL_SW_CTRL_DM_SWITCHING_MASK | MANUAL_SW_CTRL_DP_SWITCHING_MASK); |
| |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| if (muic_data->is_hiccup_mode) |
| reg_val2 |= MANUAL_SW_CTRL_UART2_MASK; |
| else { |
| #endif |
| switch (path_data) { |
| case S2MU205_PATH_USB: |
| reg_val2 |= MANUAL_SW_CTRL_USB_MASK; |
| break; |
| case S2MU205_PATH_UART_AP: |
| reg_val2 |= MANUAL_SW_CTRL_UART1_MASK; |
| break; |
| case S2MU205_PATH_UART_CP: |
| #if IS_ENABLED(CONFIG_PMU_UART_SWITCH) |
| reg_val2 |= MANUAL_SW_CTRL_UART1_MASK; |
| #else |
| reg_val2 |= MANUAL_SW_CTRL_UART2_MASK; |
| #endif |
| break; |
| case S2MU205_PATH_OPEN: |
| default: |
| reg_val2 |= MANUAL_SW_CTRL_OPEN_MASK; |
| break; |
| } |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| } |
| #endif |
| if (reg_val1 != reg_val2) { |
| ret = s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MANUAL_SW_CTRL, reg_val2); |
| reg_val2 = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MANUAL_SW_CTRL); |
| pr_info("%s manual_sw_ctrl(%#x->%#x)\n", __func__, reg_val1, reg_val2); |
| } else |
| pr_info("%s Skip to set same path val(%#x)\n", __func__, reg_val1); |
| |
| return ret; |
| } |
| |
| static int _s2mu205_muic_set_path_mode(struct s2mu205_muic_data *muic_data, |
| t_mode_data mode_data) |
| { |
| int ret = 0; |
| u8 reg_val; |
| |
| pr_info("%s new mode(%d)\n", __func__, mode_data); |
| reg_val = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL1); |
| |
| switch (mode_data) { |
| case S2MU205_MODE_MANUAL: |
| reg_val &= ~MUIC_CTRL1_MANUAL_SW_MASK; |
| break; |
| case S2MU205_MODE_AUTO: |
| default: |
| reg_val |= MUIC_CTRL1_MANUAL_SW_MASK; |
| break; |
| } |
| |
| ret = s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL1, reg_val); |
| |
| return ret; |
| } |
| |
| static int _s2mu205_muic_control_rid_adc(struct s2mu205_muic_data *muic_data, bool enable) |
| { |
| int ret = 0; |
| u8 reg_val = 0; |
| |
| pr_info("%s (%s)\n", __func__, enable ? "Enable" : "Disable"); |
| reg_val = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL2); |
| |
| if (enable) |
| reg_val &= ~MUIC_CTRL2_ADC_OFF_MASK; |
| else |
| reg_val |= MUIC_CTRL2_ADC_OFF_MASK; |
| |
| ret = s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL2, reg_val); |
| |
| return 0; |
| } |
| |
| static int _s2mu205_muic_set_bcd_rescan_reg(struct s2mu205_muic_data *muic_data) |
| { |
| u8 reg_val = 0; |
| reg_val = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_BCD_RESCAN); |
| reg_val |= BCD_RESCAN_BCD_RESCAN_MASK; |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_BCD_RESCAN, reg_val); |
| return 0; |
| } |
| |
| static inline int _s2mu205_muic_get_rid_adc(struct s2mu205_muic_data *muic_data) |
| { |
| return s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_ADC_VALUE) & ADC_VALUE_ADCVAL_MASK; |
| } |
| |
| static int _s2mu205_muic_com_to_uart(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| int ret = 0; |
| |
| if (muic_data->pdata->is_rustproof) { |
| pr_info("%s rustproof mode\n", __func__); |
| return ret; |
| } |
| |
| if (muic_pdata->uart_path == MUIC_PATH_UART_AP) { |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_UART_AP); |
| #if IS_ENABLED(CONFIG_CP_UART_NOTI) |
| send_uart_noti_to_modem(MODEM_CTRL_UART_AP); |
| #endif |
| } else { |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_UART_CP); |
| #if IS_ENABLED(CONFIG_CP_UART_NOTI) |
| send_uart_noti_to_modem(MODEM_CTRL_UART_CP); |
| #endif |
| } |
| |
| return ret; |
| } |
| |
| int _s2mu205_muic_set_jig_on(struct s2mu205_muic_data *muic_data) |
| { |
| #if IS_ENABLED(CONFIG_SEC_FACTORY) |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| bool en = muic_pdata->is_jig_on; |
| int reg = 0, ret = 0; |
| |
| pr_err("%s: %s\n", __func__, en ? "on" : "off"); |
| reg = s2mu205_i2c_read_byte(muic_data->i2c, |
| S2MU205_REG_MANUAL_SW_CTRL); |
| |
| if (en) |
| reg |= MANUAL_SW_CTRL_JIG_MASK; |
| else |
| reg &= ~(MANUAL_SW_CTRL_JIG_MASK); |
| |
| ret = s2mu205_i2c_write_byte(muic_data->i2c, |
| S2MU205_REG_MANUAL_SW_CTRL, (u8)reg); |
| |
| return ret; |
| #else |
| pr_err("%s: Skip the jig control, Not Factory Mode.\n", __func__); |
| return 0; |
| #endif |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| int _s2mu205_muic_recheck_adc(struct s2mu205_muic_data *muic_data) |
| { |
| _s2mu205_muic_control_rid_adc(muic_data, false); |
| usleep_range(10000, 12000); |
| _s2mu205_muic_control_rid_adc(muic_data, true); |
| msleep(200); |
| return _s2mu205_muic_get_rid_adc(muic_data); |
| } |
| |
| int s2mu205_muic_refresh_adc(struct s2mu205_muic_data *muic_data) |
| { |
| struct i2c_client *i2c = muic_data->i2c; |
| int adc = 0; |
| u8 reg_data, b_Rid_en = 0; |
| |
| reg_data = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL2); |
| if (!(reg_data & MUIC_CTRL2_ADC_OFF_MASK)) { |
| b_Rid_en = 1; |
| } else { |
| pr_info("%s, enable the RID\n", __func__); |
| reg_data &= ~MUIC_CTRL2_ADC_OFF_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_CTRL2, reg_data); |
| msleep(35); |
| } |
| |
| adc = (s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_ADC_VALUE)) & ADC_VALUE_ADCVAL_MASK; |
| pr_info("%s, adc : 0x%X\n", __func__, adc); |
| |
| if (!b_Rid_en) { |
| pr_info("%s, disable the RID\n", __func__); |
| reg_data |= MUIC_CTRL2_ADC_OFF_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_CTRL2, reg_data); |
| } |
| |
| return adc; |
| } |
| #endif |
| |
| static inline int _s2mu205_muic_get_vbus_state(struct s2mu205_muic_data *muic_data) |
| { |
| return (s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_DEVICE_APPLE) |
| & DEVICE_APPLE_VBUS_WAKEUP_MASK) >> DEVICE_APPLE_VBUS_WAKEUP_SHIFT; |
| } |
| |
| void s2mu205_muic_get_detect_info(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| struct i2c_client *i2c = muic_data->i2c; |
| |
| muic_data->reg[DEVICE_TYPE1] = s2mu205_i2c_read_byte(i2c, S2MU205_REG_DEVICE_TYP1); |
| muic_data->reg[DEVICE_TYPE2] = s2mu205_i2c_read_byte(i2c, S2MU205_REG_DEVICE_TYP2); |
| muic_data->reg[DEVICE_TYPE3] = s2mu205_i2c_read_byte(i2c, S2MU205_REG_DEVICE_TYP3); |
| muic_data->reg[DEVICE_APPLE] = s2mu205_i2c_read_byte(i2c, S2MU205_REG_DEVICE_APPLE); |
| muic_data->reg[CHG_TYPE] = s2mu205_i2c_read_byte(i2c, S2MU205_REG_CHG_TYP); |
| muic_data->reg[ADC] = _s2mu205_muic_get_rid_adc(muic_data); |
| muic_data->vbvolt = muic_pdata->vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| muic_data->adc = muic_pdata->adc = muic_data->reg[ADC]; |
| |
| pr_info("dev[1:0x%02x, 2:0x%02x, 3:0x%02x]\n", muic_data->reg[DEVICE_TYPE1], |
| muic_data->reg[DEVICE_TYPE2], muic_data->reg[DEVICE_TYPE3]); |
| pr_info("adc:0x%02x, vbvolt:0x%02x, apple:0x%02x\n", |
| muic_data->adc, muic_data->vbvolt, muic_data->reg[DEVICE_APPLE]); |
| pr_info("chg_type:0x%02x\n", muic_data->reg[CHG_TYPE]); |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| int s2mu205_muic_bcd_rescan(struct s2mu205_muic_data *muic_data) |
| { |
| int ret = 0; |
| |
| pr_info("%s call\n", __func__); |
| muic_data->rescan_cnt++; |
| /* muic mux switch open */ |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| if (ret < 0) |
| pr_err("%s, fail to open mansw\n", __func__); |
| |
| _s2mu205_muic_set_chg_det(muic_data, true); |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_DISABLE); |
| msleep(150); |
| cancel_delayed_work(&muic_data->rescan_validity_checker); |
| schedule_delayed_work(&muic_data->rescan_validity_checker, |
| msecs_to_jiffies(1200)); |
| #endif /* CONFIG_S2MU205_TYPEC_WATER */ |
| _s2mu205_muic_set_bcd_rescan_reg(muic_data); |
| |
| return 0; |
| } |
| #endif |
| |
| static void s2mu205_muic_dcd_recheck(struct work_struct *work) |
| { |
| struct s2mu205_muic_data *muic_data = |
| container_of(work, struct s2mu205_muic_data, dcd_recheck.work); |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| |
| /* Driver re-detects the rescan type. */ |
| int det_ret = S2MU205_DETECT_NONE; |
| |
| if (muic_core_get_ccic_cable_state(muic_pdata)) { |
| pr_info("%s Tried to rescan, but cc type detected.\n", __func__); |
| return; |
| } |
| |
| mutex_lock(&muic_data->bcd_rescan_mutex); |
| if (!muic_data->vbvolt) { |
| goto skip_dcd_recheck; |
| } |
| |
| s2mu205_muic_bcd_rescan(muic_data); |
| msleep(650); |
| s2mu205_muic_get_detect_info(muic_data); |
| |
| if (!muic_data->vbvolt || muic_core_get_ccic_cable_state(muic_data->pdata)) { |
| goto skip_dcd_recheck; |
| } |
| |
| /* Detect Type & Handle the result */ |
| det_ret = s2mu205_muic_detect_dev_bc1p2(muic_data); |
| |
| if (det_ret == S2MU205_DETECT_NONE) { |
| pr_err("%s abnormal detection : set general TA\n", __func__); |
| muic_data->new_dev = ATTACHED_DEV_TA_MUIC; |
| } |
| s2mu205_muic_handle_attached_dev(muic_data); |
| |
| skip_dcd_recheck: |
| mutex_unlock(&muic_data->bcd_rescan_mutex); |
| } |
| |
| /* |
| * Interface Functions |
| */ |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| static int s2mu205_if_get_adc(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| int ret = 0; |
| |
| mutex_lock(&muic_data->switch_mutex); |
| |
| ret = _s2mu205_muic_get_rid_adc(muic_data); |
| |
| if (ret == ADC_OPEN && muic_data->is_cable_inserted) |
| ret = ADC_GND; |
| |
| mutex_unlock(&muic_data->switch_mutex); |
| |
| return ret; |
| } |
| #endif |
| |
| #if defined(CONFIG_MUIC_SUPPORT_PRSWAP) |
| static void s2mu205_if_prswap_work(void *mdata, int mode) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| int adc = 0, vbvolt = 0; |
| |
| pr_info("%s+ dev(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| if (muic_pdata->attached_dev == ATTACHED_DEV_USB_MUIC |
| || muic_pdata->attached_dev == ATTACHED_DEV_OTG_MUIC |
| || muic_pdata->attached_dev == ATTACHED_DEV_TIMEOUT_OPEN_MUIC) { |
| pr_err("%s(%d) invalid status\n", __func__, __LINE__); |
| goto work_done; |
| } |
| |
| mutex_lock(&muic_data->muic_mutex); |
| _s2mu205_muic_set_chg_det(muic_data, false); |
| _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_USB); |
| |
| switch (mode) { |
| case MUIC_PRSWAP_TO_SINK: |
| adc = _s2mu205_muic_get_rid_adc(muic_data); |
| vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| muic_core_handle_attach(muic_data->pdata, ATTACHED_DEV_USB_MUIC, |
| adc, !!vbvolt); |
| break; |
| case MUIC_PRSWAP_TO_SRC: |
| muic_pdata->attached_dev = ATTACHED_DEV_OTG_MUIC; |
| break; |
| default: |
| pr_err("%s(%d) invalid value\n", __func__, __LINE__); |
| goto work_done; |
| break; |
| } |
| mutex_unlock(&muic_data->muic_mutex); |
| work_done: |
| pr_info("%s- dev(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| } |
| #endif |
| |
| static int s2mu205_if_com_to_open(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| int ret = 0; |
| |
| mutex_lock(&muic_data->switch_mutex); |
| |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| if (ret) |
| pr_err("%s set_com_open err\n", __func__); |
| |
| mutex_unlock(&muic_data->switch_mutex); |
| |
| return ret; |
| } |
| |
| static int s2mu205_if_com_to_usb(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| int ret = 0; |
| |
| mutex_lock(&muic_data->switch_mutex); |
| |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_USB); |
| if (ret) |
| pr_err("%s set_com_usb err\n", __func__); |
| |
| mutex_unlock(&muic_data->switch_mutex); |
| |
| return ret; |
| } |
| |
| static int s2mu205_if_com_to_uart(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| int ret = 0; |
| |
| mutex_lock(&muic_data->switch_mutex); |
| |
| ret = _s2mu205_muic_com_to_uart(muic_data); |
| if (ret) |
| pr_err("%s set_com_uart err\n", __func__); |
| |
| mutex_unlock(&muic_data->switch_mutex); |
| |
| return ret; |
| } |
| |
| static int s2mu205_if_get_vbus(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| return _s2mu205_muic_get_vbus_state(muic_data); |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| static void s2mu205_if_set_cable_state(void *mdata, muic_attached_dev_t new_dev) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| s2mu205_muic_detect_dev_ccic(muic_data, new_dev); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| } |
| |
| static void s2mu205_if_cable_recheck(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| mutex_lock(&muic_data->switch_mutex); |
| |
| s2mu205_muic_bcd_rescan(muic_data); |
| |
| mutex_unlock(&muic_data->switch_mutex); |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| } |
| |
| static int s2mu205_if_check_usb_killer(void *mdata) |
| { |
| #if IS_ENABLED(CONFIG_SEC_FACTORY) |
| return MUIC_NORMAL_OTG; |
| #else |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| struct i2c_client *i2c = muic_data->i2c; |
| int ret = MUIC_NORMAL_OTG; |
| u8 reg_val = 0; |
| bool lc_cable_inserted = false; |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| int wait_ret = 0; |
| u8 muic_int1_mask = 0, muic_int2_mask = 0, muic_ctrl2 = 0; |
| u8 adc = 0; |
| |
| if (muic_data->water_status != S2MU205_WATER_MUIC_IDLE) |
| return MUIC_ABNORMAL_OTG; |
| |
| if (!muic_data->is_cable_inserted) { |
| muic_ctrl2 = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL2); |
| if (muic_ctrl2 & MUIC_CTRL2_ADC_OFF_MASK) { |
| muic_int1_mask = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_INT1_MASK); |
| muic_int2_mask = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_INT2_MASK); |
| |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT1_MASK, 0xff); |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT2_MASK, 0xff); |
| _s2mu205_muic_control_rid_adc(muic_data, true); |
| msleep(100); |
| |
| adc = _s2mu205_muic_get_rid_adc(muic_data); |
| pr_info("%s adc(%d)\n", __func__, adc); |
| |
| _s2mu205_muic_control_rid_adc(muic_data, false); |
| usleep_range(20000, 22000); |
| |
| muic_int1_mask = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_INT1); |
| muic_int2_mask = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_INT2); |
| pr_info("%s muic_int(%#x, %#x)\n", __func__, muic_int1_mask, muic_int2_mask); |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT1_MASK, muic_int1_mask); |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT2_MASK, muic_int2_mask); |
| |
| if (adc != ADC_GND) { |
| pr_err("%s not cable state.\n", __func__); |
| return MUIC_ABNORMAL_OTG; |
| } else { |
| lc_cable_inserted = true; |
| } |
| } else { |
| wait_ret = wait_event_interruptible_timeout(muic_data->cable_wait, |
| muic_data->is_cable_inserted == true, |
| msecs_to_jiffies(300)); |
| |
| if ((wait_ret < 0) || (!wait_ret)) { |
| pr_err("%s not cable state.\n", __func__); |
| return MUIC_ABNORMAL_OTG; |
| } |
| pr_info("%s, cable detected after while.", __func__); |
| } |
| } |
| #endif |
| pr_info("%s entered\n", __func__); |
| |
| /* Set Data Path to Open. */ |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MANUAL_SW_CTRL); |
| if (reg_val & MANUAL_SW_CTRL_DM_SWITCHING_MASK) { |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| msleep(50); |
| } |
| |
| if (!muic_data->is_cable_inserted && lc_cable_inserted == false) { |
| pr_info("%s Not Cable.\n", __func__); |
| return MUIC_ABNORMAL_OTG; |
| } |
| |
| /* Release Killer INT Mask. */ |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, INT_USBKILLER_MASK1); |
| |
| /* Trigger BC 1.2 */ |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_LDOADC_VSETL, |
| LDOADC_VSETL_CHG_TYPE_DET_ALWAYS_ONB_MASK, |
| LDOADC_VSETL_CHG_TYPE_DET_ALWAYS_ONB_SHIFT, 0x0); |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_CHARGER_DET_OTP, |
| CHARGER_DET_OTP_MAN_VBUSTMR_ON_MASK, |
| CHARGER_DET_OTP_MAN_VBUSTMR_ON_SHIFT, 0x1); |
| msleep(150); |
| |
| /* Readback Dev Type */ |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_DEVICE_TYP1); |
| if (reg_val & DEVICE_TYP1_USB_MASK && reg_val & DEVICE_TYP1_DCPCHG_MASK) { |
| ret = MUIC_NORMAL_OTG; |
| } else if (reg_val & DEVICE_TYP1_DCPCHG_MASK) { |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_LDOADC_VSETH, |
| LDOADC_VSETH_LDOADC_VSETH_MASK, |
| LDOADC_VSETH_LDOADC_VSETH_SHIFT, |
| LDOADC_VSETH_LDOADC_VSETH_maxV); |
| |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_MUIC_RSVD1, |
| MUIC_RSVD1_USBKILL_EN_MASK, |
| MUIC_RSVD1_USBKILL_EN_SHIFT, 0x1); |
| muic_data->killer_status = S2MU205_KILLER_WAIT_STATUS; |
| pr_info("%s Triggered the IRQ\n", __func__); |
| |
| msleep(40); |
| |
| if (muic_data->killer_status == S2MU205_KILLER_DETECTED) { |
| ret = MUIC_ABNORMAL_OTG; |
| } else { |
| muic_data->killer_status = S2MU205_KILLER_NONE; |
| ret = MUIC_NORMAL_OTG; |
| } |
| |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_LDOADC_VSETH, |
| LDOADC_VSETH_LDOADC_VSETH_MASK, |
| LDOADC_VSETH_LDOADC_VSETH_SHIFT, |
| LDOADC_VSETH_LDOADC_VSETH_2p8V); |
| |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_MUIC_RSVD1, |
| MUIC_RSVD1_USBKILL_EN_MASK, |
| MUIC_RSVD1_USBKILL_EN_SHIFT, 0x0); |
| } else { |
| ret = MUIC_NORMAL_OTG; |
| } |
| |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, INT_MUIC_MASK1); |
| |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_LDOADC_VSETL, |
| LDOADC_VSETL_CHG_TYPE_DET_ALWAYS_ONB_MASK, |
| LDOADC_VSETL_CHG_TYPE_DET_ALWAYS_ONB_SHIFT, 0x1); |
| |
| _s2mu205_i2c_update_bit(i2c, S2MU205_REG_CHARGER_DET_OTP, |
| CHARGER_DET_OTP_MAN_VBUSTMR_ON_MASK, |
| CHARGER_DET_OTP_MAN_VBUSTMR_ON_SHIFT, 0x0); |
| |
| if (muic_data->water_status != S2MU205_WATER_MUIC_IDLE) |
| return MUIC_ABNORMAL_OTG; |
| |
| return ret; |
| #endif |
| } |
| #endif |
| |
| static int s2mu205_if_set_bcd_rescan_reg(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| return _s2mu205_muic_set_bcd_rescan_reg(muic_data); |
| } |
| |
| static int s2mu205_if_control_rid_adc(void *mdata, bool enable) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| return _s2mu205_muic_control_rid_adc(muic_data, enable); |
| } |
| |
| static int s2mu205_if_set_gpio_uart_sel(void *mdata, int uart_path) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| return s2mu205_set_gpio_uart_sel(muic_data, uart_path); |
| } |
| |
| static int s2mu205_if_set_jig_ctrl_on(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| return _s2mu205_muic_set_jig_on(muic_data); |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| static int s2mu205_if_show_register(void *mdata, char *mesg) |
| { |
| #if IS_ENABLED(CONFIG_MUIC_DEBUG) |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| if (mesg != NULL) |
| s2mu205_read_reg_dump(muic_data, mesg); |
| pr_info("%s %s\n", __func__, mesg); |
| #endif |
| return 0; |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| static void s2mu205_if_set_water_det(void *mdata, bool val) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| mutex_lock(&muic_data->muic_mutex); |
| pr_info("%s water_status : (%d)\n", __func__, muic_data->water_status); |
| if (muic_data->water_dry_status == S2MU205_WATER_DRY_MUIC_DET) { |
| if (val) |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_CCIC_INVALID; |
| else |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_CCIC_DET; |
| wake_up_interruptible(&muic_data->wait); |
| } else { |
| if (muic_data->water_status >= S2MU205_WATER_MUIC_DET) { |
| if (val) |
| muic_data->water_status = S2MU205_WATER_MUIC_CCIC_DET; |
| else |
| muic_data->water_status = S2MU205_WATER_MUIC_CCIC_INVALID; |
| pr_info("%s water_status : (%d)\n", __func__, |
| muic_data->water_status); |
| wake_up_interruptible(&muic_data->wait); |
| } else { |
| pr_err("%s wrong status\n", __func__); |
| } |
| } |
| mutex_unlock(&muic_data->muic_mutex); |
| } |
| |
| #if !IS_ENABLED(CONFIG_SEC_FACTORY) |
| static void s2mu205_if_set_water_det_from_boot(void *mdata, bool val) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| if (val) |
| s2mu205_muic_set_water_state(muic_data, MUIC_ENABLE); |
| } |
| #endif |
| #endif |
| |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| static int s2mu205_if_set_hiccup_mode(void *mdata, bool val) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| muic_data->is_hiccup_mode = val; |
| return 0; |
| } |
| |
| static int s2mu205_if_get_hiccup_mode(void *mdata) |
| { |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| return muic_data->is_hiccup_mode; |
| } |
| #endif |
| |
| static void s2mu205_if_set_bypass(void *mdata) |
| { |
| /* |
| * To prevent charging operation after entering bypass mode |
| */ |
| struct s2mu205_muic_data *muic_data = (struct s2mu205_muic_data *)mdata; |
| |
| pr_info("%s\n", __func__); |
| |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT1_MASK, 0xff); |
| s2mu205_i2c_write_byte(muic_data->i2c, S2MU205_REG_MUIC_INT2_MASK, 0xff); |
| |
| muic_core_handle_detach(muic_data->pdata); |
| } |
| |
| int s2mu205_set_gpio_uart_sel(struct s2mu205_muic_data *muic_data, int uart_sel) |
| { |
| const char *mode; |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| #if !IS_ENABLED(CONFIG_MUIC_UART_SWITCH) |
| int uart_sel_gpio = muic_pdata->gpio_uart_sel; |
| int uart_sel_val; |
| int ret; |
| |
| ret = gpio_request(uart_sel_gpio, "GPIO_UART_SEL"); |
| if (ret) { |
| pr_err("failed to gpio_request GPIO_UART_SEL\n"); |
| return ret; |
| } |
| |
| uart_sel_val = gpio_get_value(uart_sel_gpio); |
| |
| switch (uart_sel) { |
| case MUIC_PATH_UART_AP: |
| mode = "AP_UART"; |
| if (gpio_is_valid(uart_sel_gpio)) |
| gpio_direction_output(uart_sel_gpio, 1); |
| break; |
| case MUIC_PATH_UART_CP: |
| mode = "CP_UART"; |
| if (gpio_is_valid(uart_sel_gpio)) |
| gpio_direction_output(uart_sel_gpio, 0); |
| break; |
| default: |
| mode = "Error"; |
| break; |
| } |
| |
| uart_sel_val = gpio_get_value(uart_sel_gpio); |
| |
| gpio_free(uart_sel_gpio); |
| |
| pr_info("%s, GPIO_UART_SEL(%d)=%c\n", |
| mode, uart_sel_gpio, (uart_sel_val == 0 ? 'L' : 'H')); |
| #else |
| switch (uart_sel) { |
| case MUIC_PATH_UART_AP: |
| mode = "AP_UART"; |
| pin_config_set(muic_pdata.uart_addr, muic_pdata.uart_rxd, |
| PINCFG_PACK(PINCFG_TYPE_FUNC, 0x2)); |
| pin_config_set(muic_pdata.uart_addr, muic_pdata.uart_txd, |
| PINCFG_PACK(PINCFG_TYPE_FUNC, 0x2)); |
| break; |
| case MUIC_PATH_UART_CP: |
| mode = "CP_UART"; |
| pin_config_set(muic_pdata.uart_addr, muic_pdata.uart_rxd, |
| PINCFG_PACK(PINCFG_TYPE_FUNC, 0x3)); |
| pin_config_set(muic_pdata.uart_addr, muic_pdata.uart_txd, |
| PINCFG_PACK(PINCFG_TYPE_FUNC, 0x3)); |
| break; |
| default: |
| mode = "Error"; |
| break; |
| } |
| |
| pr_info("%s %s\n", __func__, mode); |
| #endif /* CONFIG_MUIC_UART_SWITCH */ |
| return 0; |
| } |
| |
| static int s2mu205_muic_reg_init(struct s2mu205_muic_data *muic_data) |
| { |
| struct i2c_client *i2c = muic_data->i2c; |
| int ret = 0, data = 0; |
| u8 reg_val = 0; |
| |
| pr_info("%s\n", __func__); |
| |
| s2mu205_muic_get_detect_info(muic_data); |
| |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, INT_MUIC_MASK1); |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT2_MASK, INT_MUIC_MASK2); |
| |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_TIMER_SET3); |
| reg_val &= ~TIMER_SET3_DCDTMRSET_MASK; |
| reg_val |= TIMER_SET3_DCDTMRSET_300ms; |
| pr_info("%s(%d) reg_val(%#x)\n", __func__, __LINE__, reg_val); |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_TIMER_SET3, reg_val); |
| |
| #if !IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| /* Masking ADC, RID interrupt */ |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MUIC_INT1_MASK); |
| reg_val |= MUIC_INT1_MASK_RID_CHG_Im_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, reg_val); |
| |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MUIC_INT2_MASK); |
| reg_val |= MUIC_INT2_MASK_ADCCHANGE_Im_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT2_MASK, reg_val); |
| #endif |
| _s2mu205_muic_set_chg_det(muic_data, false); |
| |
| /* for usb killer */ |
| _s2mu205_i2c_update_bit(muic_data->i2c, S2MU205_REG_RID_DISCHARGE, |
| RID_DISCHARGE_USBKILL_OTG_OPTION_MASK, |
| RID_DISCHARGE_USBKILL_OTG_OPTION_SHIFT, 0x1); |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_ENABLE_AUTOSW) |
| reg_val = MUIC_CTRL1_SWITCH_OPEN_MASK | MUIC_CTRL1_WAIT_MASK |
| | MUIC_CTRL1_MANUAL_SW_MASK; |
| #else |
| reg_val = MUIC_CTRL1_SWITCH_OPEN_MASK | MUIC_CTRL1_WAIT_MASK; |
| #endif |
| ret = _s2mu205_i2c_guaranteed_wbyte(i2c, S2MU205_REG_MUIC_CTRL1, reg_val); |
| if (ret < 0) |
| pr_err("failed to write ctrl(%d)\n", ret); |
| |
| data = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MANUAL_SW_CTRL); |
| pr_info("%s init path(0x%x)\n", __func__, data); |
| if (data) |
| _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| /* |
| * These registers represents the RID ADC LDO voltage control. |
| * Low / High LDO initialized to 3V, 2.7V each. |
| */ |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_ENABLE); |
| |
| _s2mu205_i2c_update_bit(muic_data->i2c, S2MU205_REG_RID_DISCHARGE, |
| RID_DISCHARGE_RID_DISCHARGE_ON_MASK, |
| RID_DISCHARGE_RID_DISCHARGE_ON_SHIFT, 0x1); |
| |
| s2mu205_muic_set_rid_for_water(muic_data, MUIC_DISABLE); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) && !IS_ENABLED(CONFIG_SEC_FACTORY) |
| /* Masking ADC, RID interrupt */ |
| reg_val = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MUIC_INT1_MASK); |
| reg_val |= MUIC_INT1_MASK_RID_CHG_Im_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, reg_val); |
| |
| data = s2mu205_i2c_read_byte(i2c, S2MU205_REG_MUIC_INT2_MASK); |
| data |= MUIC_INT2_MASK_ADCCHANGE_Im_MASK; |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT2_MASK, data); |
| pr_info("%s INT1_MASK(%#x), INT2_MASK(%#x)\n", __func__, reg_val, data); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| vbus_notifier_handle((!!muic_data->vbvolt) ? STATUS_VBUS_HIGH : STATUS_VBUS_LOW); |
| #endif /* CONFIG_VBUS_NOTIFIER */ |
| |
| return ret; |
| } |
| |
| static void s2mu205_muic_handle_legacy_detach(struct s2mu205_muic_data *muic_data) |
| { |
| pr_info("%s\n", __func__); |
| |
| _s2mu205_muic_set_chg_det(muic_data, false); |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| muic_data->rescan_cnt = 0; |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_ENABLE); |
| if (muic_data->is_cable_inserted) { |
| muic_data->is_cable_inserted = false; |
| } |
| s2mu205_muic_set_rid_int_mask_en(muic_data, MUIC_DISABLE); |
| #endif |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| static void s2mu205_muic_detect_dev_ccic(struct s2mu205_muic_data *muic_data, |
| muic_attached_dev_t new_dev) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| int adc = 0, vbvolt = 0; |
| |
| pr_info("%s new dev(%s)\n", __func__, dev_to_str(new_dev)); |
| |
| if (muic_pdata->attached_dev == new_dev) { |
| pr_err("%s: Skip to handle duplicated type\n", __func__); |
| return; |
| } |
| |
| if (new_dev == ATTACHED_DEV_NONE_MUIC) { |
| /* Detach from CCIC */ |
| if (muic_core_get_ccic_cable_state(muic_data->pdata) == false) { |
| pr_err("%s: Skip to detach legacy type\n", __func__); |
| return; |
| } |
| muic_pdata->attached_dev = ATTACHED_DEV_NONE_MUIC; |
| muic_data->killer_status = S2MU205_KILLER_NONE; |
| if (!muic_data->is_cable_inserted) { |
| s2mu205_muic_set_rid_int_mask_en(muic_data, MUIC_DISABLE); |
| } |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_PRSWAP) |
| if (muic_pdata->attached_dev == ATTACHED_DEV_USB_MUIC) { |
| s2mu205_muic_handle_legacy_detach(muic_data); |
| } |
| #endif |
| } else { |
| /* Attach from CCIC */ |
| pr_info("%s DETECTED\n", dev_to_str(new_dev)); |
| |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| muic_data->is_timeout_attached = false; |
| #endif |
| |
| switch (new_dev) { |
| case ATTACHED_DEV_OTG_MUIC: |
| _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_USB); |
| break; |
| case ATTACHED_DEV_TYPE3_CHARGER_MUIC: /* PD Charger */ |
| _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| return; |
| default: |
| break; |
| } |
| } |
| |
| if (new_dev != ATTACHED_DEV_NONE_MUIC) { |
| adc = _s2mu205_muic_get_rid_adc(muic_data); |
| vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| muic_core_handle_attach(muic_data->pdata, new_dev, adc, !!vbvolt); |
| muic_pdata->attached_dev = new_dev; |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_ENABLE); |
| #endif |
| } else if (muic_pdata->attached_dev == ATTACHED_DEV_NONE_MUIC) { |
| muic_core_handle_detach(muic_data->pdata); |
| } |
| } |
| #endif |
| |
| static int s2mu205_muic_detect_dev_bc1p2(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_interface_t *muic_if = (struct muic_interface_t *)muic_data->if_data; |
| |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| |
| /* Attached */ |
| switch (muic_data->reg[DEVICE_TYPE1]) { |
| case DEVICE_TYP1_CDPCHG_MASK: |
| if (muic_data->vbvolt) { |
| muic_data->new_dev = ATTACHED_DEV_CDP_MUIC; |
| pr_info("USB_CDP DETECTED\n"); |
| } |
| break; |
| case DEVICE_TYP1_USB_MASK: |
| if (muic_data->vbvolt) { |
| pr_info("USB DETECTED\n"); |
| muic_data->new_dev = ATTACHED_DEV_USB_MUIC; |
| } |
| break; |
| case DEVICE_TYP1_DCPCHG_MASK: |
| case DEVICE_TYP1_DCPCHG_MASK | DEVICE_TYP1_USB_MASK: |
| case DEVICE_TYP1_DCPCHG_MASK | DEVICE_TYP1_CDPCHG_MASK: |
| if (muic_data->vbvolt) { |
| muic_if->is_dcp_charger = true; |
| muic_data->new_dev = ATTACHED_DEV_TA_MUIC; |
| muic_data->afc_check = true; |
| pr_info("DEDICATED CHARGER DETECTED\n"); |
| } |
| break; |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_TYPEB) && IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| case DEVICE_TYP1_USBOTG_MASK: |
| muic_data->new_dev = ATTACHED_DEV_OTG_MUIC; |
| pr_info("USB_OTG DETECTED\n"); |
| break; |
| #endif |
| case DEVICE_TYP1_CARKIT_MASK: |
| if (muic_data->vbvolt) { |
| /* 200K, 442K should be checkef */ |
| if (muic_data->adc == ADC_CEA936ATYPE2_CHG) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_VB_MUIC; |
| pr_info("CEA936ATYPE2_CHG DETECTED\n"); |
| muic_data->afc_check = false; |
| } else { |
| muic_data->new_dev = ATTACHED_DEV_USB_MUIC; |
| pr_info("T1_T2_CHG DETECTED\n"); |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (muic_data->new_dev != ATTACHED_DEV_UNKNOWN_MUIC && |
| muic_data->new_dev != ATTACHED_DEV_NONE_MUIC) |
| goto detect_done; |
| |
| switch (muic_data->reg[DEVICE_TYPE2]) { |
| case DEVICE_TYP2_SDP_1P8S_MASK: |
| if (muic_data->vbvolt) { |
| #if IS_ENABLED(CONFIG_SEC_FACTORY) |
| pr_info("%s:%s: SDP_1P8S=>USB DETECTED\n", MUIC_DEV_NAME, __func__); |
| muic_data->new_dev = ATTACHED_DEV_USB_MUIC; |
| #else |
| pr_info("SDP_1P8S DETECTED\n"); |
| muic_data->new_dev = ATTACHED_DEV_TIMEOUT_OPEN_MUIC; |
| #endif |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (muic_data->new_dev != ATTACHED_DEV_UNKNOWN_MUIC && |
| muic_data->new_dev != ATTACHED_DEV_NONE_MUIC) |
| goto detect_done; |
| |
| if (muic_data->vbvolt && |
| ((muic_data->reg[DEVICE_APPLE] & DEVICE_APPLE_APPLE2P4A_CHG_MASK) |
| || (muic_data->reg[DEVICE_APPLE] & DEVICE_APPLE_APPLE2A_CHG_MASK) |
| || (muic_data->reg[DEVICE_APPLE] & DEVICE_APPLE_APPLE1A_CHG_MASK) |
| || (muic_data->reg[DEVICE_APPLE] & DEVICE_APPLE_APPLE0P5A_CHG_MASK))) { |
| pr_info("APPLE_CHG DETECTED\n"); |
| muic_data->new_dev = ATTACHED_DEV_TA_MUIC; |
| muic_data->afc_check = false; |
| } |
| |
| if ((muic_data->reg[CHG_TYPE] & DEV_TYPE_CHG_TYPE) && |
| (muic_data->new_dev == ATTACHED_DEV_UNKNOWN_MUIC)) { |
| muic_data->new_dev = ATTACHED_DEV_TA_MUIC; |
| muic_data->afc_check = false; |
| pr_info("CHG_TYPE DETECTED\n"); |
| if (muic_data->rescan_cnt > 1) { |
| muic_data->new_dev = ATTACHED_DEV_TA_MUIC; |
| muic_data->afc_check = false; |
| } else { |
| schedule_delayed_work(&muic_data->dcd_recheck, msecs_to_jiffies(100)); |
| return S2MU205_DETECT_SKIP; |
| } |
| } |
| |
| detect_done: |
| if (muic_data->new_dev != ATTACHED_DEV_UNKNOWN_MUIC) |
| return S2MU205_DETECT_DONE; |
| else |
| return S2MU205_DETECT_NONE; |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| static int s2mu205_muic_detect_dev_rid_array(struct s2mu205_muic_data *muic_data) |
| { |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| switch (muic_data->adc) { |
| case ADC_JIG_UART_OFF: |
| pr_info("ADC_JIG_UART_OFF\n"); |
| if (muic_data->vbvolt) |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_VB_MUIC; |
| else |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_MUIC; |
| break; |
| case ADC_JIG_USB_ON: |
| case ADC_JIG_USB_OFF: |
| case ADC_DESKDOCK: |
| muic_data->new_dev = ATTACHED_DEV_JIG_USB_ON_MUIC; |
| pr_info("ADC JIG_USB_ON DETECTED\n"); |
| break; |
| case ADC_JIG_UART_ON: |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_MUIC; |
| pr_info("ADC JIG_UART_ON DETECTED\n"); |
| break; |
| default: |
| pr_info("%s unsupported ADC(0x%02x)\n", __func__, muic_data->adc); |
| } |
| |
| return muic_data->new_dev; |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_TYPEB) |
| static int s2mu205_muic_detect_dev_jig_type(struct s2mu205_muic_data *muic_data) |
| { |
| switch (muic_data->reg[DEVICE_TYPE2]) { |
| case DEVICE_TYP2_JIGUARTOFF_MASK: |
| if (muic_data->vbvolt) |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_VB_MUIC; |
| else |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_MUIC; |
| pr_info("JIG_UART_OFF DETECTED\n"); |
| break; |
| case DEVICE_TYP2_JIGUSBOFF_MASK: |
| if (!muic_data->vbvolt) |
| break; |
| muic_data->new_dev = ATTACHED_DEV_JIG_USB_OFF_MUIC; |
| pr_info("JIG_USB_OFF DETECTED\n"); |
| break; |
| case DEVICE_TYP2_JIGUSBON_MASK: |
| if (!muic_data->vbvolt) |
| break; |
| muic_data->new_dev = ATTACHED_DEV_JIG_USB_ON_MUIC; |
| pr_info("JIG_USB_ON DETECTED\n"); |
| break; |
| case DEVICE_TYP2_JIGUARTON_MASK: |
| if (muic_data->new_dev != ATTACHED_DEV_JIG_UART_ON_MUIC) { |
| if (!muic_data->vbvolt) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_MUIC; |
| pr_info("ADC JIG_UART_ON DETECTED\n"); |
| } else { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_VB_MUIC; |
| pr_info("ADC JIG_UART_ON_VB DETECTED\n"); |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return muic_data->new_dev; |
| } |
| |
| static int s2mu205_muic_detect_dev_rid_device(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| |
| switch (muic_data->adc) { |
| case ADC_CEA936ATYPE1_CHG: /*200k ohm */ |
| if (muic_data->vbvolt) { |
| /* This is workaournd for LG USB cable which has 219k ohm ID */ |
| muic_data->new_dev = ATTACHED_DEV_USB_MUIC; |
| pr_info("TYPE1 CHARGER DETECTED(USB)\n"); |
| } |
| break; |
| case ADC_CEA936ATYPE2_CHG: |
| if (muic_data->vbvolt) { |
| muic_data->new_dev = ATTACHED_DEV_UNDEFINED_RANGE_MUIC; |
| muic_data->afc_check = false; |
| pr_info("%s unsupported ADC(0x%02x)\n", __func__, muic_data->adc); |
| } |
| break; |
| case ADC_JIG_USB_OFF: /* 255k */ |
| if (!muic_data->vbvolt) |
| break; |
| if (muic_data->new_dev != ATTACHED_DEV_JIG_USB_OFF_MUIC) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_USB_OFF_MUIC; |
| pr_info("ADC JIG_USB_OFF DETECTED\n"); |
| } |
| break; |
| case ADC_JIG_USB_ON: |
| if (!muic_data->vbvolt) |
| break; |
| if (muic_data->new_dev != ATTACHED_DEV_JIG_USB_ON_MUIC) { |
| if (!muic_data->vbvolt) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_MUIC; |
| pr_info("ADC JIG_UART_ON DETECTED\n"); |
| } else { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_VB_MUIC; |
| pr_info("ADC JIG_UART_ON_VB DETECTED\n"); |
| } |
| } |
| break; |
| case ADC_JIG_UART_OFF: |
| if (muic_pdata->is_otg_test) { |
| mdelay(100); |
| if (muic_data->vmid == 0x4) { |
| pr_info("OTG_TEST DETECTED, vmid = %d\n", muic_data->vmid); |
| muic_data->vbvolt = 1; |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_VB_OTG_MUIC; |
| } else |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_MUIC; |
| } else if (muic_data->vbvolt) |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_VB_MUIC; |
| else |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_OFF_MUIC; |
| |
| pr_info("ADC JIG_UART_OFF DETECTED\n"); |
| break; |
| case ADC_JIG_UART_ON: |
| if (muic_data->new_dev != ATTACHED_DEV_JIG_UART_ON_MUIC) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_MUIC; |
| pr_info("ADC JIG_UART_ON DETECTED\n"); |
| } |
| break; |
| case ADC_SMARTDOCK: /* 0x10000 40.2K ohm */ |
| /* SMARTDOCK is not supported */ |
| /* force not to charge the device with SMARTDOCK */ |
| muic_data->new_dev = ATTACHED_DEV_UNSUPPORTED_ID_VB_MUIC; |
| pr_info("%s unsupported ADC(0x%02x) but charging\n", |
| __func__, muic_data->adc); |
| break; |
| case ADC_HMT: /* 0x10001 49.9K ohm */ |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| pr_info("%s unsupported ADC(0x%02x) not charging\n", |
| __func__, muic_data->adc); |
| break; |
| case ADC_AUDIODOCK: |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_SUPPORT_AUDIODOCK) |
| muic_data->new_dev = ATTACHED_DEV_AUDIODOCK_MUIC; |
| #else |
| muic_data->new_dev = ATTACHED_DEV_UNDEFINED_RANGE_MUIC; |
| #endif |
| pr_info("ADC AUDIODOCK DETECTED\n"); |
| break; |
| case ADC_UNIVERSAL_MMDOCK: |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| pr_info("%s unsupported ADC(0x%02x) not charging\n", |
| __func__, muic_data->adc); |
| break; |
| case ADC_OPEN: |
| /* sometimes muic fails to catch JIG_UART_OFF detaching */ |
| /* double check with ADC */ |
| if (muic_data->new_dev == ATTACHED_DEV_JIG_UART_OFF_MUIC) { |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| pr_info("ADC OPEN DETECTED\n"); |
| } |
| break; |
| default: |
| muic_data->new_dev = ATTACHED_DEV_UNDEFINED_RANGE_MUIC; |
| pr_info("%s unsupported ADC(0x%02x)\n", __func__, muic_data->adc); |
| } |
| |
| return muic_data->new_dev; |
| } |
| |
| static int s2mu205_muic_detect_dev_mrid_adc(struct s2mu205_muic_data *muic_data) |
| { |
| muic_data->new_dev = ATTACHED_DEV_UNKNOWN_MUIC; |
| |
| if (muic_data->adc & ADC_CONVERSION_ERR_MASK) { |
| pr_info("%s ADC conversion error! (adc=%#x)\n", __func__, muic_data->adc); |
| return S2MU205_DETECT_NONE; |
| } |
| |
| muic_data->new_dev = s2mu205_muic_detect_dev_jig_type(muic_data); |
| if (muic_data->new_dev != ATTACHED_DEV_UNKNOWN_MUIC) |
| return S2MU205_DETECT_DONE; |
| |
| return S2MU205_DETECT_NONE; |
| } |
| #endif /* CONFIG_MUIC_SUPPORT_TYPEB */ |
| #endif /* CONFIG_MUIC_S2MU205_RID */ |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| static void s2mu205_muic_set_hiccup_mode(struct s2mu205_muic_data *muic_data, bool en) |
| { |
| pr_info("%s en : %d\n", __func__, (int)en); |
| muic_data->is_hiccup_mode = en; |
| _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| } |
| #endif |
| |
| static void s2mu205_muic_set_rid_int_mask_en(struct s2mu205_muic_data *muic_data, bool en) |
| { |
| struct i2c_client *i2c = muic_data->i2c; |
| |
| pr_info("%s en : %d\n", __func__, (int)en); |
| if (en) { |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, INT_WATER_MASK1); |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT2_MASK, INT_WATER_MASK2); |
| } else { |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT1_MASK, INT_MUIC_MASK1); |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_MUIC_INT2_MASK, INT_MUIC_MASK2); |
| } |
| } |
| |
| static void s2mu205_muic_set_rid_for_water(struct s2mu205_muic_data *muic_data, bool en) |
| { |
| struct i2c_client *i2c; |
| u8 reg_rid_ldo; |
| |
| if (muic_data == NULL) { |
| pr_err("%s no data\n", __func__); |
| return; |
| } |
| i2c = muic_data->i2c; |
| |
| reg_rid_ldo = s2mu205_i2c_read_byte(i2c, S2MU205_REG_RID_DISCHARGE); |
| |
| pr_info("%s en : %d\n", __func__, (int)en); |
| if (en) { |
| reg_rid_ldo |= ADCBIAS_OTP4_ADC_STDBY_BIAS_SEL_MASK; |
| } else { |
| reg_rid_ldo &= ~ADCBIAS_OTP4_ADC_STDBY_BIAS_SEL_MASK; |
| } |
| |
| s2mu205_i2c_write_byte(i2c, S2MU205_REG_RID_DISCHARGE, reg_rid_ldo); |
| } |
| |
| static void s2mu205_muic_put_dry_chk_time(struct s2mu205_muic_data *muic_data) |
| { |
| struct timeval time; |
| |
| do_gettimeofday(&time); |
| pr_info("%s Dry check time : %ld\n", __func__, (long)time.tv_sec); |
| muic_data->dry_chk_time = (long)time.tv_sec; |
| } |
| |
| #if !IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| static int s2mu205_muic_water_judge(struct s2mu205_muic_data *muic_data) |
| { |
| int i, adc = 0; |
| |
| pr_info("%s : enter\n", __func__); |
| for (i = 0; i < WATER_DET_RETRY_CNT; i++) { |
| adc = _s2mu205_muic_recheck_adc(muic_data); |
| if (adc == ADC_GND) { |
| pr_info("%s : NOT WATER\n", __func__); |
| return adc; |
| } |
| if (_s2mu205_muic_get_vbus_state(muic_data)) { |
| pr_info("%s : vbus while detecting\n", __func__); |
| return ADC_GND; |
| } |
| |
| pr_info("%s : %d st try : adc(0x%x)\n", __func__, i, adc); |
| } |
| |
| return adc; |
| } |
| #endif |
| |
| static void s2mu205_muic_set_water_state(struct s2mu205_muic_data *muic_data, bool en) |
| { |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| int vbvolt = 0; |
| #endif |
| pr_info("%s en : %d\n", __func__, (int)en); |
| if (en) { |
| pr_info("%s: WATER DETECT!!!\n", __func__); |
| muic_data->dry_cnt = 0; |
| muic_data->dry_duration_sec = WATER_DRY_RETRY_INTERVAL_SEC; |
| MUIC_SEND_NOTI_ATTACH(ATTACHED_DEV_UNDEFINED_RANGE_MUIC); |
| muic_data->water_status = S2MU205_WATER_MUIC_CCIC_STABLE; |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_IDLE; |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| vbus_notifier_handle(vbvolt ? STATUS_VBUS_HIGH : STATUS_VBUS_LOW); |
| #endif /* CONFIG_VBUS_NOTIFIER */ |
| s2mu205_muic_put_dry_chk_time(muic_data); |
| cancel_delayed_work(&muic_data->water_dry_handler); |
| schedule_delayed_work(&muic_data->water_dry_handler, |
| msecs_to_jiffies(1800000)); |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_DISABLE); |
| pr_info("%s %d WATER DETECT stabled adc : 0x%X\n", __func__, __LINE__, muic_data->adc); |
| } else { |
| pr_info("%s WATER DRIED!!!\n", __func__); |
| muic_data->water_status = S2MU205_WATER_MUIC_IDLE; |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_IDLE; |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| s2mu205_muic_set_hiccup_mode(muic_data, MUIC_DISABLE); |
| #endif |
| muic_data->dry_duration_sec = WATER_DRY_RETRY_INTERVAL_SEC; |
| muic_data->dry_cnt = 0; |
| MUIC_SEND_NOTI_DETACH(ATTACHED_DEV_UNDEFINED_RANGE_MUIC); |
| MUIC_SEND_NOTI_TO_CCIC_DETACH(ATTACHED_DEV_UNDEFINED_RANGE_MUIC); |
| } |
| } |
| |
| static void s2mu205_muic_water_detect_handler(struct work_struct *work) |
| { |
| struct s2mu205_muic_data *muic_data = |
| container_of(work, struct s2mu205_muic_data, water_detect_handler.work); |
| int wait_ret = 0; |
| |
| mutex_lock(&muic_data->water_det_mutex); |
| wake_lock(&muic_data->water_wake_lock); |
| if (muic_data->water_status != S2MU205_WATER_MUIC_VERIFY) { |
| pr_info("%s %d exit detect, due to status mismatch\n", __func__, __LINE__); |
| goto EXIT_DETECT; |
| } |
| |
| pr_info("%s\n", __func__); |
| |
| muic_data->water_status = S2MU205_WATER_MUIC_DET; |
| _s2mu205_muic_control_rid_adc(muic_data, false); |
| MUIC_SEND_NOTI_TO_CCIC_ATTACH(ATTACHED_DEV_CHK_WATER_REQ); |
| |
| wait_ret = wait_event_interruptible_timeout(muic_data->wait, |
| muic_data->water_status >= S2MU205_WATER_MUIC_CCIC_DET, |
| msecs_to_jiffies(WATER_CCIC_WAIT_DURATION_MS)); |
| |
| if ((wait_ret < 0) || (!wait_ret)) { |
| pr_err("%s wait_q abnormal, status : %d\n", __func__, muic_data->water_status); |
| muic_data->water_status = S2MU205_WATER_MUIC_IDLE; |
| _s2mu205_muic_control_rid_adc(muic_data, true); |
| } else { |
| if (muic_data->water_status == S2MU205_WATER_MUIC_CCIC_DET) { |
| s2mu205_muic_set_water_state(muic_data, MUIC_ENABLE); |
| } else if (muic_data->water_status == S2MU205_WATER_MUIC_CCIC_INVALID) { |
| pr_info("%s Not Water From CCIC.\n", __func__); |
| muic_data->water_status = S2MU205_WATER_MUIC_IDLE; |
| _s2mu205_muic_control_rid_adc(muic_data, true); |
| } |
| } |
| EXIT_DETECT: |
| wake_unlock(&muic_data->water_wake_lock); |
| mutex_unlock(&muic_data->water_det_mutex); |
| } |
| |
| static void s2mu205_muic_water_dry_handler(struct work_struct *work) |
| { |
| struct s2mu205_muic_data *muic_data = |
| container_of(work, struct s2mu205_muic_data, water_dry_handler.work); |
| int adc, i = 0; |
| int wait_ret = 0; |
| |
| mutex_lock(&muic_data->water_dry_mutex); |
| wake_lock(&muic_data->water_dry_wake_lock); |
| |
| if (muic_data->water_status != S2MU205_WATER_MUIC_CCIC_STABLE) { |
| pr_info("%s Invalid status for Dry check\n", __func__); |
| goto EXIT_DRY_STATE; |
| } |
| |
| pr_info("%s Dry check start\n", __func__); |
| s2mu205_muic_put_dry_chk_time(muic_data); |
| s2mu205_muic_set_rid_int_mask_en(muic_data, true); |
| |
| if (muic_data->dry_cnt++ > 5) { |
| muic_data->dry_duration_sec = 1800; |
| pr_info("%s Dry check cnt : %d\n", __func__, muic_data->dry_cnt); |
| } |
| |
| for (i = 0; i < WATER_DET_RETRY_CNT; i++) { |
| adc = _s2mu205_muic_recheck_adc(muic_data); |
| pr_info("%s, %d th try, adc : 0x%X\n", __func__, i, (char)adc); |
| if (adc < ADC_OPEN) { |
| pr_info("%s WATER IS NOT DRIED YET!!!\n", __func__); |
| _s2mu205_muic_control_rid_adc(muic_data, false); |
| cancel_delayed_work(&muic_data->water_dry_handler); |
| schedule_delayed_work(&muic_data->water_dry_handler, |
| msecs_to_jiffies(1800000)); |
| msleep(1000); |
| goto EXIT_DRY; |
| } |
| } |
| |
| s2mu205_muic_set_rid_int_mask_en(muic_data, false); |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_DET; |
| MUIC_SEND_NOTI_TO_CCIC_ATTACH(ATTACHED_DEV_CHK_WATER_DRY_REQ); |
| wait_ret = wait_event_interruptible_timeout(muic_data->wait, |
| muic_data->water_dry_status >= S2MU205_WATER_DRY_MUIC_CCIC_DET, |
| msecs_to_jiffies(WATER_CCIC_WAIT_DURATION_MS)); |
| |
| if ((wait_ret < 0) || (!wait_ret) |
| || muic_data->water_dry_status == S2MU205_WATER_DRY_MUIC_CCIC_INVALID) { |
| pr_err("%s wait_q abnormal, status : %d\n", |
| __func__, muic_data->water_dry_status); |
| _s2mu205_muic_control_rid_adc(muic_data, false); |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_IDLE; |
| msleep(1000); |
| muic_data->water_status = S2MU205_WATER_MUIC_CCIC_STABLE; |
| cancel_delayed_work(&muic_data->water_dry_handler); |
| schedule_delayed_work(&muic_data->water_dry_handler, |
| msecs_to_jiffies(WATER_DRY_RETRY_INTERVAL_MS)); |
| } else if (muic_data->water_dry_status == S2MU205_WATER_DRY_MUIC_CCIC_DET) { |
| msleep(500); |
| s2mu205_muic_set_water_state(muic_data, MUIC_DISABLE); |
| } |
| |
| EXIT_DRY: |
| pr_info("%s %d Exit DRY handler!!!\n", __func__, __LINE__); |
| s2mu205_muic_set_rid_int_mask_en(muic_data, false); |
| EXIT_DRY_STATE: |
| wake_unlock(&muic_data->water_dry_wake_lock); |
| mutex_unlock(&muic_data->water_dry_mutex); |
| } |
| |
| static void s2mu205_muic_sleep_dry_checker(struct work_struct *work) |
| { |
| struct s2mu205_muic_data *muic_data = |
| container_of(work, struct s2mu205_muic_data, sleep_dry_checker.work); |
| struct timeval time; |
| long duration; |
| |
| pr_info("%s entered\n", __func__); |
| if (muic_data->water_status == S2MU205_WATER_MUIC_CCIC_STABLE && muic_data->lcd_on) { |
| if (!_s2mu205_muic_get_vbus_state(muic_data)) { |
| do_gettimeofday(&time); |
| duration = (long)time.tv_sec - muic_data->dry_chk_time; |
| pr_info("%s dry check duration : (%ld), compare : (%ld)\n", |
| __func__, duration, muic_data->dry_duration_sec); |
| if ((duration > muic_data->dry_duration_sec) || (duration < 0)) { |
| cancel_delayed_work(&muic_data->water_dry_handler); |
| schedule_delayed_work(&muic_data->water_dry_handler, 0); |
| } |
| } |
| } |
| } |
| |
| static void s2mu205_muic_rescan_validity_checker(struct work_struct *work) |
| { |
| struct s2mu205_muic_data *muic_data = |
| container_of(work, struct s2mu205_muic_data, rescan_validity_checker.work); |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| #if defined(CONFIG_NONE_WATERPROOF_MODEL) |
| struct muic_interface_t *muic_if = muic_data->if_data; |
| #endif |
| u8 reg_val = 0; |
| |
| pr_info("%s entered\n", __func__); |
| |
| if (!_s2mu205_muic_get_vbus_state(muic_data) |
| #if !IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| || !muic_data->is_cable_inserted |
| #endif |
| ) { |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| pr_info("%s NONE_WATERPROOF_MODEL\n", __func__); |
| #else |
| pr_info("%s vbus detached while checking.\n", __func__); |
| #endif |
| return; |
| #if defined(CONFIG_NONE_WATERPROOF_MODEL) |
| } else if (muic_if->is_bypass) { |
| pr_info("%s is_bypass(%d)\n", __func__, muic_if->is_bypass); |
| return; |
| #endif |
| } |
| |
| if (!MUIC_IS_ATTACHED(muic_pdata->attached_dev)) { |
| pr_info("%s detected dev(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| reg_val = s2mu205_i2c_read_byte(muic_data->i2c, S2MU205_REG_MUIC_CTRL2); |
| if (reg_val & MUIC_CTRL2_ADC_OFF_MASK) { |
| muic_data->invalid_rescanned = true; |
| } |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| pr_info("TIMEOUT DETECTED\n"); |
| muic_data->is_timeout_attached = true; |
| muic_data->new_dev = ATTACHED_DEV_TIMEOUT_OPEN_MUIC; |
| s2mu205_muic_handle_attached_dev(muic_data); |
| #endif |
| } |
| } |
| |
| static int muic_fb_notifier_event(struct notifier_block *this, |
| unsigned long val, void *v) |
| { |
| struct fb_event *evdata = v; |
| struct s2mu205_muic_data *muic_data = |
| container_of(this, struct s2mu205_muic_data, fb_notifier); |
| int fb_blank = 0; |
| |
| if (evdata->info->node) |
| return NOTIFY_DONE; |
| |
| switch (val) { |
| case FB_EVENT_BLANK: |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| fb_blank = *(int *)evdata->data; |
| |
| if (fb_blank == FB_BLANK_UNBLANK) { |
| pr_info("%s: lcd on\n", __func__); |
| muic_data->lcd_on = true; |
| pr_info("%s entered, w_state : %d\n", __func__, muic_data->water_status); |
| if (muic_data->water_status == S2MU205_WATER_MUIC_CCIC_STABLE) { |
| cancel_delayed_work(&muic_data->sleep_dry_checker); |
| schedule_delayed_work(&muic_data->sleep_dry_checker, |
| msecs_to_jiffies(WATER_WAKEUP_WAIT_DURATION_MS)); |
| } |
| } else |
| muic_data->lcd_on = false; |
| |
| return NOTIFY_DONE; |
| } |
| #endif |
| |
| static void s2mu205_muic_handle_attached_dev(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| if (muic_data->new_dev != ATTACHED_DEV_UNKNOWN_MUIC && |
| muic_data->new_dev != muic_pdata->attached_dev) { |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| muic_manager_set_legacy_dev(muic_pdata->muic_if, muic_data->new_dev); |
| #endif |
| muic_core_handle_attach(muic_pdata, muic_data->new_dev, |
| muic_pdata->adc, muic_pdata->vbvolt); |
| } |
| } |
| |
| static void _s2mu205_muic_resend_jig_type(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| |
| if (muic_data->vbvolt |
| && (muic_pdata->attached_dev == ATTACHED_DEV_JIG_UART_ON_MUIC)) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_VB_MUIC; |
| s2mu205_muic_handle_attached_dev(muic_data); |
| } else if (!muic_data->vbvolt |
| && (muic_pdata->attached_dev == ATTACHED_DEV_JIG_UART_ON_VB_MUIC)) { |
| muic_data->new_dev = ATTACHED_DEV_JIG_UART_ON_MUIC; |
| s2mu205_muic_handle_attached_dev(muic_data); |
| } |
| } |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_CCIC) |
| static bool s2mu205_muic_is_opmode_typeC(struct s2mu205_muic_data *muic_data) |
| { |
| struct muic_interface_t *muic_if; |
| |
| if (muic_data->if_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return false; |
| } |
| |
| if (muic_data->if_data) |
| muic_if = muic_data->if_data; |
| |
| if (muic_if->opmode & OPMODE_CCIC) |
| return true; |
| else |
| return false; |
| } |
| #endif |
| |
| static irqreturn_t s2mu205_muic_attach_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| int det_ret = S2MU205_DETECT_NONE; |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| s2mu205_muic_get_detect_info(muic_data); |
| if (s2mu205_muic_is_opmode_typeC(muic_data)) { |
| if (!muic_data->is_cable_inserted |
| && muic_data->adc == ADC_GND) { |
| muic_data->is_cable_inserted = true; |
| wake_up_interruptible(&muic_data->cable_wait); |
| } |
| } |
| |
| if (MUIC_IS_ATTACHED(muic_pdata->attached_dev)) { |
| pr_err("%s Cable type already was attached\n", __func__); |
| goto attach_skip; |
| } |
| |
| pr_info("%s start(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| pr_info("%s rescan cnt : %d\n", __func__, muic_data->rescan_cnt); |
| if (s2mu205_muic_is_opmode_typeC(muic_data)) { |
| if (IS_WATER_ADC(muic_data->adc) |
| || IS_WATER_STATUS(muic_data->water_status)) { |
| goto attach_skip; |
| } else if (muic_data->rescan_cnt == 0 |
| && muic_data->adc == ADC_GND |
| && muic_data->vbvolt |
| && !muic_core_get_ccic_cable_state(muic_pdata) |
| && !IS_WATER_STATUS(muic_data->water_status)) { |
| s2mu205_muic_bcd_rescan(muic_data); |
| goto attach_skip; |
| } |
| } |
| #endif |
| |
| det_ret = s2mu205_muic_detect_dev_bc1p2(muic_data); |
| if (det_ret == S2MU205_DETECT_DONE) |
| goto attach_done; |
| else if (det_ret == S2MU205_DETECT_SKIP) |
| goto attach_skip; |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) && IS_ENABLED(CONFIG_MUIC_SUPPORT_TYPEB) |
| det_ret = s2mu205_muic_detect_dev_mrid_adc(muic_data); |
| #endif |
| attach_done: |
| s2mu205_muic_handle_attached_dev(muic_data); |
| |
| attach_skip: |
| pr_info("%s done(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu205_muic_detach_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| pr_info("%s start(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| if (MUIC_IS_ATTACHED(muic_pdata->attached_dev) == false) { |
| pr_err("%s Cable type already was detached\n", __func__); |
| goto detach_skip; |
| } |
| |
| s2mu205_muic_get_detect_info(muic_data); |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_CCIC) |
| if (s2mu205_muic_is_opmode_typeC(muic_data)) { |
| if (!muic_core_get_ccic_cable_state(muic_data->pdata)) { |
| muic_core_handle_detach(muic_data->pdata); |
| s2mu205_muic_handle_legacy_detach(muic_data); |
| } |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| else if (muic_data->adc == ADC_OPEN && muic_data->is_cable_inserted) { |
| muic_data->is_cable_inserted = false; |
| } |
| #endif |
| } else |
| muic_core_handle_detach(muic_data->pdata); |
| #else |
| muic_core_handle_detach(muic_data->pdata); |
| #endif |
| |
| detach_skip: |
| pr_info("%s done(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu205_muic_vbus_on_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| pr_info("%s start(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| s2mu205_muic_get_detect_info(muic_data); |
| if (s2mu205_muic_is_opmode_typeC(muic_data)) { |
| muic_data->invalid_rescanned = false; |
| cancel_delayed_work(&muic_data->rescan_validity_checker); |
| schedule_delayed_work(&muic_data->rescan_validity_checker, |
| msecs_to_jiffies(1200)); |
| if (!muic_data->is_cable_inserted |
| && muic_data->adc == ADC_GND) { |
| muic_data->is_cable_inserted = true; |
| wake_up_interruptible(&muic_data->cable_wait); |
| } |
| if (muic_data->rescan_cnt == 0 |
| && muic_data->adc == ADC_GND |
| && !muic_core_get_ccic_cable_state(muic_pdata) |
| && !IS_WATER_STATUS(muic_data->water_status)) { |
| msleep(150); |
| s2mu205_muic_bcd_rescan(muic_data); |
| } |
| } |
| #else |
| muic_pdata->vbvolt = muic_data->vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) && IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| if (!lpcharge && |
| IS_WATER_STATUS(muic_data->water_status)) { |
| s2mu205_muic_set_hiccup_mode(muic_data, MUIC_ENABLE); |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| vbus_notifier_handle(STATUS_VBUS_HIGH); |
| #endif /* CONFIG_VBUS_NOTIFIER */ |
| _s2mu205_muic_resend_jig_type(muic_data); |
| |
| pr_info("%s done(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu205_muic_vbus_off_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| pr_info("%s start(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| muic_pdata->vbvolt = muic_data->vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| muic_data->rescan_cnt = 0; |
| #endif |
| |
| #if IS_ENABLED(CONFIG_VBUS_NOTIFIER) |
| vbus_notifier_handle(STATUS_VBUS_LOW); |
| #endif /* CONFIG_VBUS_NOTIFIER */ |
| _s2mu205_muic_resend_jig_type(muic_data); |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| if (muic_data->invalid_rescanned |
| && !MUIC_IS_ATTACHED(muic_pdata->attached_dev)) { |
| _s2mu205_muic_control_rid_adc(muic_data, MUIC_ENABLE); |
| muic_data->invalid_rescanned = false; |
| } |
| #endif |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| if (muic_data->is_timeout_attached) { |
| muic_data->is_timeout_attached = false; |
| muic_core_handle_detach(muic_data->pdata); |
| } |
| #endif |
| |
| pr_info("%s done(%s)\n", __func__, dev_to_str(muic_pdata->attached_dev)); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu205_muic_usb_killer_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| |
| if (muic_data == NULL) { |
| pr_err("%s, data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| pr_info("%s\n", __func__); |
| if (muic_data->killer_status == S2MU205_KILLER_WAIT_STATUS) |
| muic_data->killer_status = S2MU205_KILLER_DETECTED; |
| |
| return IRQ_HANDLED; |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| static irqreturn_t s2mu205_muic_rid_chg_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| muic_data->adc = muic_pdata->adc = _s2mu205_muic_get_rid_adc(muic_data);; |
| |
| pr_info("%s Vbus(%s), rid_adc(%#x), Type(%s)\n", __func__, |
| (_s2mu205_muic_get_vbus_state(muic_data) ? "High" : "Low"), |
| muic_data->adc, dev_to_str(muic_pdata->attached_dev)); |
| |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t s2mu205_muic_adc_change_isr(int irq, void *data) |
| { |
| struct s2mu205_muic_data *muic_data = data; |
| struct muic_platform_data *muic_pdata; |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| struct muic_interface_t *muic_if; |
| #endif |
| #endif |
| |
| if (muic_data == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| muic_pdata = muic_data->pdata; |
| |
| if (muic_pdata == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| muic_if = muic_data->if_data; |
| |
| if (muic_if == NULL) { |
| pr_err("%s data NULL\n", __func__); |
| return IRQ_NONE; |
| } |
| #endif |
| #endif |
| |
| mutex_lock(&muic_data->muic_mutex); |
| wake_lock(&muic_data->wake_lock); |
| |
| muic_data->adc = muic_pdata->adc = _s2mu205_muic_get_rid_adc(muic_data); |
| muic_data->vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| |
| pr_info("%s Vbus(%s), rid_adc(%#x), Type(%s), opmode : %s\n", __func__, |
| (muic_data->vbvolt ? "High" : "Low"), |
| muic_data->adc, dev_to_str(muic_pdata->attached_dev), |
| (muic_if->opmode ? "CCIC" : "MUIC")); |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| if (muic_if->opmode & OPMODE_CCIC) { |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| pr_info("%s, water det is skipeed, non waterproof model, adc : %d\n", |
| __func__, muic_data->adc); |
| if ((IS_WATER_ADC(muic_data->adc) |
| || (muic_data->adc & ADC_CONVERSION_ERR_MASK)) |
| && (!muic_data->vbvolt)) { |
| pr_info("%s, water detected\n", __func__); |
| } |
| goto exit_adc_chg; |
| #else |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| if ((IS_WATER_ADC(muic_data->adc) |
| || (muic_data->adc & ADC_CONVERSION_ERR_MASK)) |
| && (!muic_data->vbvolt) |
| && (muic_data->water_status == S2MU205_WATER_MUIC_IDLE)) { |
| muic_data->water_status = S2MU205_WATER_MUIC_VERIFY; |
| msleep(100); |
| muic_data->adc = s2mu205_muic_water_judge(muic_data); |
| muic_data->vbvolt = _s2mu205_muic_get_vbus_state(muic_data); |
| if (IS_WATER_ADC(muic_data->adc) && (!muic_data->vbvolt)) { |
| cancel_delayed_work(&muic_data->water_detect_handler); |
| schedule_delayed_work(&muic_data->water_detect_handler, |
| msecs_to_jiffies(0)); |
| goto exit_adc_chg; |
| } else { |
| muic_data->water_status = S2MU205_WATER_MUIC_IDLE; |
| } |
| } |
| #endif |
| #endif |
| } else { |
| s2mu205_muic_detect_dev_rid_array(muic_data); |
| s2mu205_muic_handle_attached_dev(muic_data); |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MUIC_SUPPORT_TYPEB) |
| if (!MUIC_IS_ATTACHED(muic_pdata->attached_dev)) { |
| muic_data->new_dev = s2mu205_muic_detect_dev_rid_device(muic_data); |
| if (MUIC_IS_ATTACHED(muic_data->new_dev) && |
| muic_data->new_dev != muic_pdata->attached_dev) { |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| muic_manager_set_legacy_dev(muic_pdata->muic_if, muic_data->new_dev); |
| #endif |
| muic_core_handle_attach(muic_pdata, muic_data->new_dev, |
| muic_pdata->adc, muic_pdata->vbvolt); |
| } |
| } else { |
| pr_info("%s, but (%s) is attached.\n", |
| __func__, dev_to_str(muic_pdata->attached_dev)); |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| exit_adc_chg: |
| #endif |
| wake_unlock(&muic_data->wake_lock); |
| mutex_unlock(&muic_data->muic_mutex); |
| |
| return IRQ_HANDLED; |
| } |
| #endif |
| |
| static irqreturn_t s2mu205_muic_reserved_isr(int irq, void *data) |
| { |
| pr_info("%s irq_num(%d)\n", __func__, irq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int s2mu205_muic_irq_init(struct s2mu205_muic_data *muic_data) |
| { |
| int ret = 0; |
| |
| if (muic_data->mfd_pdata && (muic_data->mfd_pdata->irq_base > 0)) { |
| int irq_base = muic_data->mfd_pdata->irq_base; |
| |
| /* request MUIC IRQ */ |
| muic_data->irq_attach = irq_base + S2MU205_MUIC_IRQ1_ATTACH; |
| REQUEST_IRQ(muic_data->irq_attach, muic_data, |
| "muic-attach", &s2mu205_muic_attach_isr); |
| |
| muic_data->irq_detach = irq_base + S2MU205_MUIC_IRQ1_DETACH; |
| REQUEST_IRQ(muic_data->irq_detach, muic_data, |
| "muic-detach", &s2mu205_muic_detach_isr); |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| muic_data->irq_rid_chg = irq_base + S2MU205_MUIC_IRQ1_RID_CHG; |
| REQUEST_IRQ(muic_data->irq_rid_chg, muic_data, |
| "muic-rid_chg", &s2mu205_muic_rid_chg_isr); |
| #endif |
| |
| muic_data->irq_usb_killer = irq_base + S2MU205_MUIC_IRQ1_USB_Killer; |
| REQUEST_IRQ(muic_data->irq_usb_killer, muic_data, |
| "muic-usb_killer", &s2mu205_muic_usb_killer_isr); |
| |
| muic_data->irq_vbus_on = irq_base + S2MU205_MUIC_IRQ2_VBUS_ON; |
| REQUEST_IRQ(muic_data->irq_vbus_on, muic_data, |
| "muic-vbus_on", &s2mu205_muic_vbus_on_isr); |
| |
| muic_data->irq_rsvd_attach = irq_base + S2MU205_MUIC_IRQ2_RSVD_ATTACH; |
| REQUEST_IRQ(muic_data->irq_rsvd_attach, muic_data, |
| "muic-rsvd_attach", &s2mu205_muic_reserved_isr); |
| |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| muic_data->irq_adc_change = irq_base + S2MU205_MUIC_IRQ2_ADC_CHANGE; |
| REQUEST_IRQ(muic_data->irq_adc_change, muic_data, |
| "muic-adc_change", &s2mu205_muic_adc_change_isr); |
| #endif |
| |
| muic_data->irq_av_charge = irq_base + S2MU205_MUIC_IRQ2_AV_CHARGE; |
| REQUEST_IRQ(muic_data->irq_av_charge, muic_data, |
| "muic-av_charge", &s2mu205_muic_reserved_isr); |
| |
| muic_data->irq_vbus_off = irq_base + S2MU205_MUIC_IRQ2_VBUS_OFF; |
| REQUEST_IRQ(muic_data->irq_vbus_off, muic_data, |
| "muic-vbus_off", &s2mu205_muic_vbus_off_isr); |
| |
| } |
| |
| pr_info("%s muic-attach(%d), muic-detach(%d), muic-rid_chg(%d), muic-vbus_on(%d)", |
| __func__, muic_data->irq_attach, muic_data->irq_detach, muic_data->irq_rid_chg, |
| muic_data->irq_vbus_on); |
| pr_info("muic-rsvd_attach(%d), muic-adc_change(%d), muic-av_charge(%d), muic-vbus_off(%d)\n", |
| muic_data->irq_rsvd_attach, muic_data->irq_adc_change, |
| muic_data->irq_av_charge, muic_data->irq_vbus_off); |
| |
| return ret; |
| } |
| |
| static void s2mu205_muic_free_irqs(struct s2mu205_muic_data *muic_data) |
| { |
| pr_info("%s\n", __func__); |
| |
| /* free MUIC IRQ */ |
| FREE_IRQ(muic_data->irq_attach, muic_data, "muic-attach"); |
| FREE_IRQ(muic_data->irq_detach, muic_data, "muic-detach"); |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| FREE_IRQ(muic_data->irq_rid_chg, muic_data, "muic-rid_chg"); |
| #endif |
| FREE_IRQ(muic_data->irq_vbus_on, muic_data, "muic-vbus_on"); |
| FREE_IRQ(muic_data->irq_rsvd_attach, muic_data, "muic-rsvd_attach"); |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| FREE_IRQ(muic_data->irq_adc_change, muic_data, "muic-adc_change"); |
| #endif |
| FREE_IRQ(muic_data->irq_av_charge, muic_data, "muic-av_charge"); |
| FREE_IRQ(muic_data->irq_vbus_off, muic_data, "muic-vbus_off"); |
| } |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static int of_s2mu205_muic_dt(struct device *dev, |
| struct s2mu205_muic_data *muic_data) |
| { |
| struct device_node *np, *np_muic; |
| int ret = 0; |
| |
| np = dev->parent->of_node; |
| if (!np) { |
| pr_err("%s : could not find np\n", __func__); |
| return -ENODEV; |
| } |
| |
| np_muic = of_find_node_by_name(np, "muic"); |
| if (!np_muic) { |
| pr_err("%s : could not find muic sub-node np_muic\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* FIXME */ |
| #if !IS_ENABLED(CONFIG_MUIC_UART_SWITCH) |
| if (of_gpio_count(np_muic) < 1) { |
| pr_err("%s : could not find muic gpio\n", __func__); |
| muic_data->pdata->gpio_uart_sel = 0; |
| } else |
| muic_data->pdata->gpio_uart_sel = of_get_gpio(np_muic, 0); |
| #else |
| muic_data->pdata->uart_addr = |
| (const char *)of_get_property(np_muic, "muic,uart_addr", NULL); |
| muic_data->pdata->uart_txd = |
| (const char *)of_get_property(np_muic, "muic,uart_txd", NULL); |
| muic_data->pdata->uart_rxd = |
| (const char *)of_get_property(np_muic, "muic,uart_rxd", NULL); |
| #endif |
| |
| return ret; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static void s2mu205_muic_init_drvdata(struct s2mu205_muic_data *muic_data, |
| struct s2mu205_dev *s2mu205, |
| struct platform_device *pdev, |
| struct s2mu205_platform_data *mfd_pdata) |
| { |
| /* save platfom data for gpio control functions */ |
| muic_data->s2mu205_dev = s2mu205; |
| muic_data->dev = &pdev->dev; |
| muic_data->i2c = s2mu205->muic; |
| muic_data->mfd_pdata = mfd_pdata; |
| muic_data->afc_check = false; |
| muic_data->rescan_cnt = 0; |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| muic_data->water_status = S2MU205_WATER_MUIC_IDLE; |
| muic_data->water_dry_status = S2MU205_WATER_DRY_MUIC_IDLE; |
| muic_data->dry_chk_time = 0; |
| muic_data->dry_cnt = 0; |
| muic_data->dry_duration_sec = WATER_DRY_RETRY_INTERVAL_SEC; |
| muic_data->invalid_rescanned = false; |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| muic_data->is_hiccup_mode = false; |
| #endif |
| muic_data->killer_status = S2MU205_KILLER_NONE; |
| muic_data->is_cable_inserted = false; |
| #endif |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| muic_data->is_timeout_attached = false; |
| #endif |
| |
| } |
| |
| static void s2mu205_muic_init_interface(struct s2mu205_muic_data *muic_data, |
| struct muic_interface_t *muic_if) |
| { |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| |
| pr_info("%s, muic_if : 0x%p, muic_data : 0x%p\n", |
| __func__, muic_if, muic_data); |
| |
| muic_if->muic_data = (void *)muic_data; |
| |
| muic_if->set_com_to_open = s2mu205_if_com_to_open; |
| muic_if->set_switch_to_usb = s2mu205_if_com_to_usb; |
| muic_if->set_com_to_otg = s2mu205_if_com_to_usb; |
| muic_if->set_switch_to_uart = s2mu205_if_com_to_uart; |
| muic_if->get_vbus = s2mu205_if_get_vbus; |
| muic_if->set_gpio_uart_sel = s2mu205_if_set_gpio_uart_sel; |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| muic_if->set_cable_state = s2mu205_if_set_cable_state; |
| muic_if->set_dcd_rescan = s2mu205_if_cable_recheck; |
| muic_if->check_usb_killer = s2mu205_if_check_usb_killer; |
| #endif |
| muic_if->bcd_rescan = s2mu205_if_set_bcd_rescan_reg; |
| muic_if->control_rid_adc = s2mu205_if_control_rid_adc; |
| #if IS_ENABLED(CONFIG_MUIC_S2MU205_RID) |
| muic_if->get_adc = s2mu205_if_get_adc; |
| #endif |
| muic_if->set_jig_ctrl_on = s2mu205_if_set_jig_ctrl_on; |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| muic_if->show_register = s2mu205_if_show_register; |
| #endif |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| muic_if->set_water_detect = s2mu205_if_set_water_det; |
| #if !IS_ENABLED(CONFIG_SEC_FACTORY) |
| muic_if->set_water_detect_from_boot = s2mu205_if_set_water_det_from_boot; |
| #endif |
| #endif |
| #if IS_ENABLED(CONFIG_HICCUP_CHARGER) |
| muic_if->set_hiccup_mode = s2mu205_if_set_hiccup_mode; |
| muic_if->get_hiccup_mode = s2mu205_if_get_hiccup_mode; |
| #endif |
| #if defined(CONFIG_MUIC_SUPPORT_PRSWAP) |
| muic_if->prswap_work = s2mu205_if_prswap_work; |
| #endif |
| muic_if->set_bypass = s2mu205_if_set_bypass; |
| muic_data->if_data = muic_if; |
| muic_pdata->muic_if = muic_if; |
| } |
| |
| static int s2mu205_muic_probe(struct platform_device *pdev) |
| { |
| struct s2mu205_dev *s2mu205 = dev_get_drvdata(pdev->dev.parent); |
| struct s2mu205_platform_data *mfd_pdata = dev_get_platdata(s2mu205->dev); |
| struct s2mu205_muic_data *muic_data; |
| struct muic_platform_data *muic_pdata; |
| struct muic_interface_t *muic_if; |
| int ret = 0; |
| |
| pr_info("%s start\n", __func__); |
| muic_data = devm_kzalloc(&pdev->dev, sizeof(*muic_data), GFP_KERNEL); |
| if (unlikely(!muic_data)) { |
| pr_err("%s out of memory\n", __func__); |
| ret = -ENOMEM; |
| goto err_return; |
| } |
| |
| if (unlikely(!mfd_pdata)) { |
| pr_err("%s failed to get s2mu205 mfd platform data\n", |
| __func__); |
| ret = -ENOMEM; |
| goto err_kfree1; |
| } |
| |
| muic_pdata = muic_core_init(muic_data); |
| if (unlikely(!muic_pdata)) |
| goto err_kfree1; |
| |
| muic_data->pdata = muic_pdata; |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| muic_if = muic_manager_init(muic_pdata, muic_data); |
| #else |
| muic_if = kzalloc(sizeof(*muic_if), GFP_KERNEL); |
| #endif |
| |
| if (!muic_if) { |
| pr_err("%s failed to init muic manager, ret : 0x%X\n", |
| __func__, ret); |
| goto err_init_if; |
| } |
| |
| s2mu205_muic_init_interface(muic_data, muic_if); |
| s2mu205_muic_init_drvdata(muic_data, s2mu205, pdev, mfd_pdata); |
| #if IS_ENABLED(CONFIG_OF) |
| ret = of_s2mu205_muic_dt(&pdev->dev, muic_data); |
| if (ret < 0) |
| pr_err("no muic dt! ret[%d]\n", ret); |
| #endif /* CONFIG_OF */ |
| |
| mutex_init(&muic_data->muic_mutex); |
| mutex_init(&muic_data->switch_mutex); |
| mutex_init(&muic_data->bcd_rescan_mutex); |
| wake_lock_init(&muic_data->wake_lock, WAKE_LOCK_SUSPEND, "muic_wake"); |
| platform_set_drvdata(pdev, muic_data); |
| |
| if (muic_data->pdata->init_gpio_cb) |
| ret = muic_data->pdata->init_gpio_cb(muic_data->pdata, get_switch_sel()); |
| if (ret) { |
| pr_err("%s failed to init gpio(%d)\n", __func__, ret); |
| goto fail_init_gpio; |
| } |
| |
| pr_info("%s: usb_path(%d), uart_path(%d)\n", __func__, |
| muic_pdata->usb_path, muic_pdata->uart_path); |
| |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| ret = muic_sysfs_init(muic_pdata); |
| if (ret) { |
| pr_err("failed to create sysfs\n"); |
| goto fail_init_sysfs; |
| } |
| #endif |
| |
| ret = s2mu205_muic_reg_init(muic_data); |
| if (ret) { |
| pr_err("failed to init muic(%d)\n", ret); |
| goto fail; |
| } |
| |
| if (muic_pdata->is_rustproof) { |
| pr_err("%s rustproof is enabled\n", __func__); |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| } |
| |
| pr_info("%s muic_if->opmode(%d)\n", __func__, muic_if->opmode); |
| |
| INIT_DELAYED_WORK(&muic_data->dcd_recheck, s2mu205_muic_dcd_recheck); |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| init_waitqueue_head(&muic_data->wait); |
| init_waitqueue_head(&muic_data->cable_wait); |
| |
| INIT_DELAYED_WORK(&muic_data->water_dry_handler, |
| s2mu205_muic_water_dry_handler); |
| INIT_DELAYED_WORK(&muic_data->water_detect_handler, |
| s2mu205_muic_water_detect_handler); |
| INIT_DELAYED_WORK(&muic_data->sleep_dry_checker, |
| s2mu205_muic_sleep_dry_checker); |
| INIT_DELAYED_WORK(&muic_data->rescan_validity_checker, |
| s2mu205_muic_rescan_validity_checker); |
| |
| mutex_init(&muic_data->water_det_mutex); |
| mutex_init(&muic_data->water_dry_mutex); |
| wake_lock_init(&muic_data->water_wake_lock, |
| WAKE_LOCK_SUSPEND, "muic_water_wake"); |
| wake_lock_init(&muic_data->water_dry_wake_lock, |
| WAKE_LOCK_SUSPEND, "muic_water_dry_wake"); |
| muic_data->fb_notifier.priority = -1; |
| muic_data->fb_notifier.notifier_call = muic_fb_notifier_event; |
| fb_register_client(&muic_data->fb_notifier); |
| #endif |
| |
| ret = muic_manager_psy_init(muic_if, &pdev->dev); |
| if (ret) { |
| pr_err("%s failed to init psy(%d)\n", __func__, ret); |
| } |
| |
| ret = s2mu205_muic_irq_init(muic_data); |
| if (ret) { |
| pr_err("%s failed to init irq(%d)\n", __func__, ret); |
| goto fail_init_irq; |
| } |
| |
| if (muic_if->opmode == OPMODE_MUIC) { |
| s2mu205_muic_adc_change_isr(-1, muic_data); |
| } else { |
| s2mu205_muic_get_detect_info(muic_data); |
| #if IS_ENABLED(CONFIG_NONE_WATERPROOF_MODEL) |
| cancel_delayed_work(&muic_data->rescan_validity_checker); |
| schedule_delayed_work(&muic_data->rescan_validity_checker, |
| msecs_to_jiffies(1200)); |
| #endif |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| /* Initial Check */ |
| if (muic_data->rescan_cnt == 0 |
| && muic_data->vbvolt |
| && muic_data->adc == ADC_GND |
| && !muic_core_get_ccic_cable_state(muic_pdata) |
| && !IS_WATER_STATUS(muic_data->water_status)) { |
| /* In case of normal charger cable */ |
| s2mu205_muic_bcd_rescan(muic_data); |
| } else if (!muic_data->is_cable_inserted |
| && muic_data->adc == ADC_GND) { |
| /* In case of OTG */ |
| muic_data->is_cable_inserted = true; |
| wake_up_interruptible(&muic_data->cable_wait); |
| } else if (muic_data->adc != ADC_GND |
| && !_s2mu205_muic_get_vbus_state(muic_data)) { |
| /* In case of None Cable |
| * Need to check the water. |
| */ |
| muic_data->adc = _s2mu205_muic_recheck_adc(muic_data); |
| } |
| #else |
| s2mu205_muic_attach_isr(-1, muic_data); |
| #endif |
| } |
| return 0; |
| |
| fail_init_irq: |
| fail: |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| muic_sysfs_deinit(muic_pdata); |
| fail_init_sysfs: |
| #endif |
| fail_init_gpio: |
| mutex_destroy(&muic_data->muic_mutex); |
| err_init_if: |
| err_kfree1: |
| err_return: |
| return ret; |
| } |
| |
| /* if need to set s2mu205 pdata */ |
| static const struct of_device_id s2mu205_muic_match_table[] = { |
| {.compatible = "samsung,s2mu205-muic",}, |
| {}, |
| }; |
| |
| static int s2mu205_muic_remove(struct platform_device *pdev) |
| { |
| struct s2mu205_muic_data *muic_data = platform_get_drvdata(pdev); |
| |
| if (muic_data) { |
| pr_info("%s\n", __func__); |
| |
| #if IS_ENABLED(CONFIG_MUIC_SYSFS) |
| if (muic_data->pdata != NULL) |
| muic_sysfs_deinit(muic_data->pdata); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MUIC_MANAGER) |
| if (muic_data->if_data != NULL) |
| muic_manager_exit(muic_data->if_data); |
| #else |
| kfree(muic_data->if_data); |
| #endif |
| muic_core_exit(muic_data->pdata); |
| |
| disable_irq_wake(muic_data->i2c->irq); |
| s2mu205_muic_free_irqs(muic_data); |
| mutex_destroy(&muic_data->muic_mutex); |
| mutex_destroy(&muic_data->switch_mutex); |
| i2c_set_clientdata(muic_data->i2c, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static void s2mu205_muic_shutdown(struct platform_device *pdev) |
| { |
| struct s2mu205_muic_data *muic_data = platform_get_drvdata(pdev); |
| int ret; |
| |
| pr_info("%s\n", __func__); |
| |
| if (!muic_data->i2c) { |
| pr_err("%s no muic i2c client\n", __func__); |
| return; |
| } |
| _s2mu205_muic_set_chg_det(muic_data, true); |
| |
| ret = _s2mu205_muic_sel_path(muic_data, S2MU205_PATH_OPEN); |
| if (ret < 0) |
| pr_err("fail to open mansw\n"); |
| |
| /* set auto sw mode before shutdown to make sure device goes into */ |
| /* LPM charging when TA or USB is connected during off state */ |
| ret = _s2mu205_muic_set_path_mode(muic_data, S2MU205_MODE_AUTO); |
| if (ret < 0) { |
| pr_err("%s fail to update reg\n", __func__); |
| return; |
| } |
| } |
| |
| #if IS_ENABLED(CONFIG_PM) |
| static int s2mu205_muic_suspend(struct device *dev) |
| { |
| struct s2mu205_muic_data *muic_data = dev_get_drvdata(dev); |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| |
| muic_pdata->suspended = true; |
| |
| #if IS_ENABLED(CONFIG_S2MU205_TYPEC_WATER) |
| if (muic_data->water_status == S2MU205_WATER_MUIC_CCIC_STABLE) { |
| cancel_delayed_work(&muic_data->sleep_dry_checker); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int s2mu205_muic_resume(struct device *dev) |
| { |
| struct s2mu205_muic_data *muic_data = dev_get_drvdata(dev); |
| struct muic_platform_data *muic_pdata = muic_data->pdata; |
| |
| muic_pdata->suspended = false; |
| |
| if (muic_pdata->need_to_noti) { |
| if (muic_pdata->attached_dev) { |
| MUIC_SEND_NOTI_ATTACH(muic_pdata->attached_dev); |
| } else { |
| MUIC_SEND_NOTI_DETACH(muic_pdata->attached_dev); |
| } |
| |
| muic_pdata->need_to_noti = false; |
| } |
| |
| return 0; |
| } |
| #else |
| #define s2mu205_muic_suspend NULL |
| #define s2mu205_muic_resume NULL |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(s2mu205_muic_pm_ops, s2mu205_muic_suspend, |
| s2mu205_muic_resume); |
| |
| static struct platform_driver s2mu205_muic_driver = { |
| .probe = s2mu205_muic_probe, |
| .remove = s2mu205_muic_remove, |
| .shutdown = s2mu205_muic_shutdown, |
| .driver = { |
| .name = "s2mu205-muic", |
| .owner = THIS_MODULE, |
| .of_match_table = s2mu205_muic_match_table, |
| #if IS_ENABLED(CONFIG_PM) |
| .pm = &s2mu205_muic_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init s2mu205_muic_init(void) |
| { |
| return platform_driver_register(&s2mu205_muic_driver); |
| } |
| module_init(s2mu205_muic_init); |
| |
| static void __exit s2mu205_muic_exit(void) |
| { |
| platform_driver_unregister(&s2mu205_muic_driver); |
| } |
| module_exit(s2mu205_muic_exit); |
| |
| MODULE_DESCRIPTION("Samsung S2MU205 Micro USB IC driver"); |
| MODULE_LICENSE("GPL"); |