i2c-parport: Add support for One For All remote JP1 interface
This simple patch adds support to i2c-parport for the One For All remote
JP1 parallel port interfaces which can be found detailed at:
http://www.hifi-remote.com/jp1/hardware.shtml
These allow access to the internal configuration EEPROM on various
remote controls and there are a variety of Windows tools that make use
of this hardware. I have tested this patch with the "simple" parallel
port device and a One For All URC-7562 and confirmed that the data read
using the eeprom i2c driver matches that returned by the Windows "IR"
JP1 tool.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index 9ddd816..ed69d84 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -88,6 +88,13 @@
.getscl = { 0x40, STAT, 0 },
.init = { 0xfc, DATA, 0 },
},
+ /* type 7: One For All JP1 parallel port adapter */
+ {
+ .setsda = { 0x01, DATA, 0 },
+ .setscl = { 0x02, DATA, 0 },
+ .getsda = { 0x80, STAT, 1 },
+ .init = { 0x04, DATA, 1 },
+ },
};
static int type = -1;
@@ -101,4 +108,5 @@
" 4 = ADM1032 evaluation board\n"
" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
" 6 = Barco LPT->DVI (K5800236) adapter\n"
+ " 7 = One For All JP1 parallel port adapter\n"
);