| /* The CPM2 internal interrupt controller. It is usually |
| * the only interrupt controller. |
| * There are two 32-bit registers (high/low) for up to 64 |
| * possible interrupts. |
| * |
| * Now, the fun starts.....Interrupt Numbers DO NOT MAP |
| * in a simple arithmetic fashion to mask or pending registers. |
| * That is, interrupt 4 does not map to bit position 4. |
| * We create two tables, indexed by vector number, to indicate |
| * which register to use and which bit in the register to use. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/irq.h> |
| |
| #include <asm/immap_cpm2.h> |
| #include <asm/mpc8260.h> |
| |
| #include "cpm2_pic.h" |
| |
| static u_char irq_to_siureg[] = { |
| 1, 1, 1, 1, 1, 1, 1, 1, |
| 1, 1, 1, 1, 1, 1, 1, 1, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 1, 1, 1, 1, 1, 1, 1, 1, |
| 1, 1, 1, 1, 1, 1, 1, 1, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0 |
| }; |
| |
| /* bit numbers do not match the docs, these are precomputed so the bit for |
| * a given irq is (1 << irq_to_siubit[irq]) */ |
| static u_char irq_to_siubit[] = { |
| 0, 15, 14, 13, 12, 11, 10, 9, |
| 8, 7, 6, 5, 4, 3, 2, 1, |
| 2, 1, 0, 14, 13, 12, 11, 10, |
| 9, 8, 7, 6, 5, 4, 3, 0, |
| 31, 30, 29, 28, 27, 26, 25, 24, |
| 23, 22, 21, 20, 19, 18, 17, 16, |
| 16, 17, 18, 19, 20, 21, 22, 23, |
| 24, 25, 26, 27, 28, 29, 30, 31, |
| }; |
| |
| static void cpm2_mask_irq(unsigned int irq_nr) |
| { |
| int bit, word; |
| volatile uint *simr; |
| |
| irq_nr -= CPM_IRQ_OFFSET; |
| |
| bit = irq_to_siubit[irq_nr]; |
| word = irq_to_siureg[irq_nr]; |
| |
| simr = &(cpm2_immr->im_intctl.ic_simrh); |
| ppc_cached_irq_mask[word] &= ~(1 << bit); |
| simr[word] = ppc_cached_irq_mask[word]; |
| } |
| |
| static void cpm2_unmask_irq(unsigned int irq_nr) |
| { |
| int bit, word; |
| volatile uint *simr; |
| |
| irq_nr -= CPM_IRQ_OFFSET; |
| |
| bit = irq_to_siubit[irq_nr]; |
| word = irq_to_siureg[irq_nr]; |
| |
| simr = &(cpm2_immr->im_intctl.ic_simrh); |
| ppc_cached_irq_mask[word] |= 1 << bit; |
| simr[word] = ppc_cached_irq_mask[word]; |
| } |
| |
| static void cpm2_mask_and_ack(unsigned int irq_nr) |
| { |
| int bit, word; |
| volatile uint *simr, *sipnr; |
| |
| irq_nr -= CPM_IRQ_OFFSET; |
| |
| bit = irq_to_siubit[irq_nr]; |
| word = irq_to_siureg[irq_nr]; |
| |
| simr = &(cpm2_immr->im_intctl.ic_simrh); |
| sipnr = &(cpm2_immr->im_intctl.ic_sipnrh); |
| ppc_cached_irq_mask[word] &= ~(1 << bit); |
| simr[word] = ppc_cached_irq_mask[word]; |
| sipnr[word] = 1 << bit; |
| } |
| |
| static void cpm2_end_irq(unsigned int irq_nr) |
| { |
| int bit, word; |
| volatile uint *simr; |
| |
| if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) |
| && irq_desc[irq_nr].action) { |
| |
| irq_nr -= CPM_IRQ_OFFSET; |
| bit = irq_to_siubit[irq_nr]; |
| word = irq_to_siureg[irq_nr]; |
| |
| simr = &(cpm2_immr->im_intctl.ic_simrh); |
| ppc_cached_irq_mask[word] |= 1 << bit; |
| simr[word] = ppc_cached_irq_mask[word]; |
| /* |
| * Work around large numbers of spurious IRQs on PowerPC 82xx |
| * systems. |
| */ |
| mb(); |
| } |
| } |
| |
| static struct hw_interrupt_type cpm2_pic = { |
| .typename = " CPM2 SIU ", |
| .enable = cpm2_unmask_irq, |
| .disable = cpm2_mask_irq, |
| .ack = cpm2_mask_and_ack, |
| .end = cpm2_end_irq, |
| }; |
| |
| int cpm2_get_irq(struct pt_regs *regs) |
| { |
| int irq; |
| unsigned long bits; |
| |
| /* For CPM2, read the SIVEC register and shift the bits down |
| * to get the irq number. */ |
| bits = cpm2_immr->im_intctl.ic_sivec; |
| irq = bits >> 26; |
| |
| if (irq == 0) |
| return(-1); |
| return irq+CPM_IRQ_OFFSET; |
| } |
| |
| void cpm2_init_IRQ(void) |
| { |
| int i; |
| |
| /* Clear the CPM IRQ controller, in case it has any bits set |
| * from the bootloader |
| */ |
| |
| /* Mask out everything */ |
| cpm2_immr->im_intctl.ic_simrh = 0x00000000; |
| cpm2_immr->im_intctl.ic_simrl = 0x00000000; |
| wmb(); |
| |
| /* Ack everything */ |
| cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff; |
| cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff; |
| wmb(); |
| |
| /* Dummy read of the vector */ |
| i = cpm2_immr->im_intctl.ic_sivec; |
| rmb(); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| cpm2_immr->im_intctl.ic_sicr = 0; |
| cpm2_immr->im_intctl.ic_scprrh = 0x05309770; |
| cpm2_immr->im_intctl.ic_scprrl = 0x05309770; |
| |
| |
| /* Enable chaining to OpenPIC, and make everything level |
| */ |
| for (i = 0; i < NR_CPM_INTS; i++) { |
| irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic; |
| irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL; |
| } |
| } |