add driver for enc28j60 ethernet chip
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h
new file mode 100644
index 0000000..1a0b209
--- /dev/null
+++ b/drivers/net/enc28j60_hw.h
@@ -0,0 +1,309 @@
+/*
+ * enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers
+ *
+ * $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $
+ */
+
+#ifndef _ENC28J60_HW_H
+#define _ENC28J60_HW_H
+
+/*
+ * ENC28J60 Control Registers
+ * Control register definitions are a combination of address,
+ * bank number, and Ethernet/MAC/PHY indicator bits.
+ * - Register address (bits 0-4)
+ * - Bank number (bits 5-6)
+ * - MAC/MII indicator (bit 7)
+ */
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define SPRD_MASK 0x80
+/* All-bank registers */
+#define EIE 0x1B
+#define EIR 0x1C
+#define ESTAT 0x1D
+#define ECON2 0x1E
+#define ECON1 0x1F
+/* Bank 0 registers */
+#define ERDPTL (0x00|0x00)
+#define ERDPTH (0x01|0x00)
+#define EWRPTL (0x02|0x00)
+#define EWRPTH (0x03|0x00)
+#define ETXSTL (0x04|0x00)
+#define ETXSTH (0x05|0x00)
+#define ETXNDL (0x06|0x00)
+#define ETXNDH (0x07|0x00)
+#define ERXSTL (0x08|0x00)
+#define ERXSTH (0x09|0x00)
+#define ERXNDL (0x0A|0x00)
+#define ERXNDH (0x0B|0x00)
+#define ERXRDPTL (0x0C|0x00)
+#define ERXRDPTH (0x0D|0x00)
+#define ERXWRPTL (0x0E|0x00)
+#define ERXWRPTH (0x0F|0x00)
+#define EDMASTL (0x10|0x00)
+#define EDMASTH (0x11|0x00)
+#define EDMANDL (0x12|0x00)
+#define EDMANDH (0x13|0x00)
+#define EDMADSTL (0x14|0x00)
+#define EDMADSTH (0x15|0x00)
+#define EDMACSL (0x16|0x00)
+#define EDMACSH (0x17|0x00)
+/* Bank 1 registers */
+#define EHT0 (0x00|0x20)
+#define EHT1 (0x01|0x20)
+#define EHT2 (0x02|0x20)
+#define EHT3 (0x03|0x20)
+#define EHT4 (0x04|0x20)
+#define EHT5 (0x05|0x20)
+#define EHT6 (0x06|0x20)
+#define EHT7 (0x07|0x20)
+#define EPMM0 (0x08|0x20)
+#define EPMM1 (0x09|0x20)
+#define EPMM2 (0x0A|0x20)
+#define EPMM3 (0x0B|0x20)
+#define EPMM4 (0x0C|0x20)
+#define EPMM5 (0x0D|0x20)
+#define EPMM6 (0x0E|0x20)
+#define EPMM7 (0x0F|0x20)
+#define EPMCSL (0x10|0x20)
+#define EPMCSH (0x11|0x20)
+#define EPMOL (0x14|0x20)
+#define EPMOH (0x15|0x20)
+#define EWOLIE (0x16|0x20)
+#define EWOLIR (0x17|0x20)
+#define ERXFCON (0x18|0x20)
+#define EPKTCNT (0x19|0x20)
+/* Bank 2 registers */
+#define MACON1 (0x00|0x40|SPRD_MASK)
+/* #define MACON2 (0x01|0x40|SPRD_MASK) */
+#define MACON3 (0x02|0x40|SPRD_MASK)
+#define MACON4 (0x03|0x40|SPRD_MASK)
+#define MABBIPG (0x04|0x40|SPRD_MASK)
+#define MAIPGL (0x06|0x40|SPRD_MASK)
+#define MAIPGH (0x07|0x40|SPRD_MASK)
+#define MACLCON1 (0x08|0x40|SPRD_MASK)
+#define MACLCON2 (0x09|0x40|SPRD_MASK)
+#define MAMXFLL (0x0A|0x40|SPRD_MASK)
+#define MAMXFLH (0x0B|0x40|SPRD_MASK)
+#define MAPHSUP (0x0D|0x40|SPRD_MASK)
+#define MICON (0x11|0x40|SPRD_MASK)
+#define MICMD (0x12|0x40|SPRD_MASK)
+#define MIREGADR (0x14|0x40|SPRD_MASK)
+#define MIWRL (0x16|0x40|SPRD_MASK)
+#define MIWRH (0x17|0x40|SPRD_MASK)
+#define MIRDL (0x18|0x40|SPRD_MASK)
+#define MIRDH (0x19|0x40|SPRD_MASK)
+/* Bank 3 registers */
+#define MAADR1 (0x00|0x60|SPRD_MASK)
+#define MAADR0 (0x01|0x60|SPRD_MASK)
+#define MAADR3 (0x02|0x60|SPRD_MASK)
+#define MAADR2 (0x03|0x60|SPRD_MASK)
+#define MAADR5 (0x04|0x60|SPRD_MASK)
+#define MAADR4 (0x05|0x60|SPRD_MASK)
+#define EBSTSD (0x06|0x60)
+#define EBSTCON (0x07|0x60)
+#define EBSTCSL (0x08|0x60)
+#define EBSTCSH (0x09|0x60)
+#define MISTAT (0x0A|0x60|SPRD_MASK)
+#define EREVID (0x12|0x60)
+#define ECOCON (0x15|0x60)
+#define EFLOCON (0x17|0x60)
+#define EPAUSL (0x18|0x60)
+#define EPAUSH (0x19|0x60)
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHHID1 0x02
+#define PHHID2 0x03
+#define PHCON2 0x10
+#define PHSTAT2 0x11
+#define PHIE 0x12
+#define PHIR 0x13
+#define PHLCON 0x14
+
+/* ENC28J60 EIE Register Bit Definitions */
+#define EIE_INTIE 0x80
+#define EIE_PKTIE 0x40
+#define EIE_DMAIE 0x20
+#define EIE_LINKIE 0x10
+#define EIE_TXIE 0x08
+/* #define EIE_WOLIE 0x04 (reserved) */
+#define EIE_TXERIE 0x02
+#define EIE_RXERIE 0x01
+/* ENC28J60 EIR Register Bit Definitions */
+#define EIR_PKTIF 0x40
+#define EIR_DMAIF 0x20
+#define EIR_LINKIF 0x10
+#define EIR_TXIF 0x08
+/* #define EIR_WOLIF 0x04 (reserved) */
+#define EIR_TXERIF 0x02
+#define EIR_RXERIF 0x01
+/* ENC28J60 ESTAT Register Bit Definitions */
+#define ESTAT_INT 0x80
+#define ESTAT_LATECOL 0x10
+#define ESTAT_RXBUSY 0x04
+#define ESTAT_TXABRT 0x02
+#define ESTAT_CLKRDY 0x01
+/* ENC28J60 ECON2 Register Bit Definitions */
+#define ECON2_AUTOINC 0x80
+#define ECON2_PKTDEC 0x40
+#define ECON2_PWRSV 0x20
+#define ECON2_VRPS 0x08
+/* ENC28J60 ECON1 Register Bit Definitions */
+#define ECON1_TXRST 0x80
+#define ECON1_RXRST 0x40
+#define ECON1_DMAST 0x20
+#define ECON1_CSUMEN 0x10
+#define ECON1_TXRTS 0x08
+#define ECON1_RXEN 0x04
+#define ECON1_BSEL1 0x02
+#define ECON1_BSEL0 0x01
+/* ENC28J60 MACON1 Register Bit Definitions */
+#define MACON1_LOOPBK 0x10
+#define MACON1_TXPAUS 0x08
+#define MACON1_RXPAUS 0x04
+#define MACON1_PASSALL 0x02
+#define MACON1_MARXEN 0x01
+/* ENC28J60 MACON2 Register Bit Definitions */
+#define MACON2_MARST 0x80
+#define MACON2_RNDRST 0x40
+#define MACON2_MARXRST 0x08
+#define MACON2_RFUNRST 0x04
+#define MACON2_MATXRST 0x02
+#define MACON2_TFUNRST 0x01
+/* ENC28J60 MACON3 Register Bit Definitions */
+#define MACON3_PADCFG2 0x80
+#define MACON3_PADCFG1 0x40
+#define MACON3_PADCFG0 0x20
+#define MACON3_TXCRCEN 0x10
+#define MACON3_PHDRLEN 0x08
+#define MACON3_HFRMLEN 0x04
+#define MACON3_FRMLNEN 0x02
+#define MACON3_FULDPX 0x01
+/* ENC28J60 MICMD Register Bit Definitions */
+#define MICMD_MIISCAN 0x02
+#define MICMD_MIIRD 0x01
+/* ENC28J60 MISTAT Register Bit Definitions */
+#define MISTAT_NVALID 0x04
+#define MISTAT_SCAN 0x02
+#define MISTAT_BUSY 0x01
+/* ENC28J60 ERXFCON Register Bit Definitions */
+#define ERXFCON_UCEN 0x80
+#define ERXFCON_ANDOR 0x40
+#define ERXFCON_CRCEN 0x20
+#define ERXFCON_PMEN 0x10
+#define ERXFCON_MPEN 0x08
+#define ERXFCON_HTEN 0x04
+#define ERXFCON_MCEN 0x02
+#define ERXFCON_BCEN 0x01
+
+/* ENC28J60 PHY PHCON1 Register Bit Definitions */
+#define PHCON1_PRST 0x8000
+#define PHCON1_PLOOPBK 0x4000
+#define PHCON1_PPWRSV 0x0800
+#define PHCON1_PDPXMD 0x0100
+/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */
+#define PHSTAT1_PFDPX 0x1000
+#define PHSTAT1_PHDPX 0x0800
+#define PHSTAT1_LLSTAT 0x0004
+#define PHSTAT1_JBSTAT 0x0002
+/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
+#define PHSTAT2_TXSTAT (1 << 13)
+#define PHSTAT2_RXSTAT (1 << 12)
+#define PHSTAT2_COLSTAT (1 << 11)
+#define PHSTAT2_LSTAT (1 << 10)
+#define PHSTAT2_DPXSTAT (1 << 9)
+#define PHSTAT2_PLRITY (1 << 5)
+/* ENC28J60 PHY PHCON2 Register Bit Definitions */
+#define PHCON2_FRCLINK 0x4000
+#define PHCON2_TXDIS 0x2000
+#define PHCON2_JABBER 0x0400
+#define PHCON2_HDLDIS 0x0100
+/* ENC28J60 PHY PHIE Register Bit Definitions */
+#define PHIE_PLNKIE (1 << 4)
+#define PHIE_PGEIE (1 << 1)
+/* ENC28J60 PHY PHIR Register Bit Definitions */
+#define PHIR_PLNKIF (1 << 4)
+#define PHIR_PGEIF (1 << 1)
+
+/* ENC28J60 Packet Control Byte Bit Definitions */
+#define PKTCTRL_PHUGEEN 0x08
+#define PKTCTRL_PPADEN 0x04
+#define PKTCTRL_PCRCEN 0x02
+#define PKTCTRL_POVERRIDE 0x01
+
+/* ENC28J60 Transmit Status Vector */
+#define TSV_TXBYTECNT 0
+#define TSV_TXCOLLISIONCNT 16
+#define TSV_TXCRCERROR 20
+#define TSV_TXLENCHKERROR 21
+#define TSV_TXLENOUTOFRANGE 22
+#define TSV_TXDONE 23
+#define TSV_TXMULTICAST 24
+#define TSV_TXBROADCAST 25
+#define TSV_TXPACKETDEFER 26
+#define TSV_TXEXDEFER 27
+#define TSV_TXEXCOLLISION 28
+#define TSV_TXLATECOLLISION 29
+#define TSV_TXGIANT 30
+#define TSV_TXUNDERRUN 31
+#define TSV_TOTBYTETXONWIRE 32
+#define TSV_TXCONTROLFRAME 48
+#define TSV_TXPAUSEFRAME 49
+#define TSV_BACKPRESSUREAPP 50
+#define TSV_TXVLANTAGFRAME 51
+
+#define TSV_SIZE 7
+#define TSV_BYTEOF(x) ((x) / 8)
+#define TSV_BITMASK(x) (1 << ((x) % 8))
+#define TSV_GETBIT(x, y) (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0)
+
+/* ENC28J60 Receive Status Vector */
+#define RSV_RXLONGEVDROPEV 16
+#define RSV_CARRIEREV 18
+#define RSV_CRCERROR 20
+#define RSV_LENCHECKERR 21
+#define RSV_LENOUTOFRANGE 22
+#define RSV_RXOK 23
+#define RSV_RXMULTICAST 24
+#define RSV_RXBROADCAST 25
+#define RSV_DRIBBLENIBBLE 26
+#define RSV_RXCONTROLFRAME 27
+#define RSV_RXPAUSEFRAME 28
+#define RSV_RXUNKNOWNOPCODE 29
+#define RSV_RXTYPEVLAN 30
+
+#define RSV_SIZE 6
+#define RSV_BITMASK(x) (1 << ((x) - 16))
+#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+
+/* SPI operation codes */
+#define ENC28J60_READ_CTRL_REG 0x00
+#define ENC28J60_READ_BUF_MEM 0x3A
+#define ENC28J60_WRITE_CTRL_REG 0x40
+#define ENC28J60_WRITE_BUF_MEM 0x7A
+#define ENC28J60_BIT_FIELD_SET 0x80
+#define ENC28J60_BIT_FIELD_CLR 0xA0
+#define ENC28J60_SOFT_RESET 0xFF
+
+
+/* buffer boundaries applied to internal 8K ram
+ * entire available packet buffer space is allocated.
+ * Give TX buffer space for one full ethernet frame (~1500 bytes)
+ * receive buffer gets the rest */
+#define TXSTART_INIT 0x1A00
+#define TXEND_INIT 0x1FFF
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+#define RXSTART_INIT 0x0000
+#define RXEND_INIT 0x19FF
+
+/* maximum ethernet frame length */
+#define MAX_FRAMELEN 1518
+
+/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */
+#define ENC28J60_LAMPS_MODE 0x3476
+
+#endif