| /* |
| * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller |
| * |
| * Copyright (C) 2008 Marvell International Ltd. |
| * All rights reserved. |
| * |
| * 2009-02-16 adapted from original version for PXA168/910 |
| * Jun Nie <njun@marvell.com> |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/fb.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/uaccess.h> |
| #include <video/pxa168fb.h> |
| |
| #include "pxa168fb.h" |
| |
| #define DEFAULT_REFRESH 60 /* Hz */ |
| |
| static int determine_best_pix_fmt(struct fb_var_screeninfo *var) |
| { |
| /* |
| * Pseudocolor mode? |
| */ |
| if (var->bits_per_pixel == 8) |
| return PIX_FMT_PSEUDOCOLOR; |
| |
| /* |
| * Check for 565/1555. |
| */ |
| if (var->bits_per_pixel == 16 && var->red.length <= 5 && |
| var->green.length <= 6 && var->blue.length <= 5) { |
| if (var->transp.length == 0) { |
| if (var->red.offset >= var->blue.offset) |
| return PIX_FMT_RGB565; |
| else |
| return PIX_FMT_BGR565; |
| } |
| |
| if (var->transp.length == 1 && var->green.length <= 5) { |
| if (var->red.offset >= var->blue.offset) |
| return PIX_FMT_RGB1555; |
| else |
| return PIX_FMT_BGR1555; |
| } |
| |
| /* fall through */ |
| } |
| |
| /* |
| * Check for 888/A888. |
| */ |
| if (var->bits_per_pixel <= 32 && var->red.length <= 8 && |
| var->green.length <= 8 && var->blue.length <= 8) { |
| if (var->bits_per_pixel == 24 && var->transp.length == 0) { |
| if (var->red.offset >= var->blue.offset) |
| return PIX_FMT_RGB888PACK; |
| else |
| return PIX_FMT_BGR888PACK; |
| } |
| |
| if (var->bits_per_pixel == 32 && var->transp.length == 8) { |
| if (var->red.offset >= var->blue.offset) |
| return PIX_FMT_RGBA888; |
| else |
| return PIX_FMT_BGRA888; |
| } else { |
| if (var->red.offset >= var->blue.offset) |
| return PIX_FMT_RGB888UNPACK; |
| else |
| return PIX_FMT_BGR888UNPACK; |
| } |
| |
| /* fall through */ |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt) |
| { |
| switch (pix_fmt) { |
| case PIX_FMT_RGB565: |
| var->bits_per_pixel = 16; |
| var->red.offset = 11; var->red.length = 5; |
| var->green.offset = 5; var->green.length = 6; |
| var->blue.offset = 0; var->blue.length = 5; |
| var->transp.offset = 0; var->transp.length = 0; |
| break; |
| case PIX_FMT_BGR565: |
| var->bits_per_pixel = 16; |
| var->red.offset = 0; var->red.length = 5; |
| var->green.offset = 5; var->green.length = 6; |
| var->blue.offset = 11; var->blue.length = 5; |
| var->transp.offset = 0; var->transp.length = 0; |
| break; |
| case PIX_FMT_RGB1555: |
| var->bits_per_pixel = 16; |
| var->red.offset = 10; var->red.length = 5; |
| var->green.offset = 5; var->green.length = 5; |
| var->blue.offset = 0; var->blue.length = 5; |
| var->transp.offset = 15; var->transp.length = 1; |
| break; |
| case PIX_FMT_BGR1555: |
| var->bits_per_pixel = 16; |
| var->red.offset = 0; var->red.length = 5; |
| var->green.offset = 5; var->green.length = 5; |
| var->blue.offset = 10; var->blue.length = 5; |
| var->transp.offset = 15; var->transp.length = 1; |
| break; |
| case PIX_FMT_RGB888PACK: |
| var->bits_per_pixel = 24; |
| var->red.offset = 16; var->red.length = 8; |
| var->green.offset = 8; var->green.length = 8; |
| var->blue.offset = 0; var->blue.length = 8; |
| var->transp.offset = 0; var->transp.length = 0; |
| break; |
| case PIX_FMT_BGR888PACK: |
| var->bits_per_pixel = 24; |
| var->red.offset = 0; var->red.length = 8; |
| var->green.offset = 8; var->green.length = 8; |
| var->blue.offset = 16; var->blue.length = 8; |
| var->transp.offset = 0; var->transp.length = 0; |
| break; |
| case PIX_FMT_RGBA888: |
| var->bits_per_pixel = 32; |
| var->red.offset = 16; var->red.length = 8; |
| var->green.offset = 8; var->green.length = 8; |
| var->blue.offset = 0; var->blue.length = 8; |
| var->transp.offset = 24; var->transp.length = 8; |
| break; |
| case PIX_FMT_BGRA888: |
| var->bits_per_pixel = 32; |
| var->red.offset = 0; var->red.length = 8; |
| var->green.offset = 8; var->green.length = 8; |
| var->blue.offset = 16; var->blue.length = 8; |
| var->transp.offset = 24; var->transp.length = 8; |
| break; |
| case PIX_FMT_PSEUDOCOLOR: |
| var->bits_per_pixel = 8; |
| var->red.offset = 0; var->red.length = 8; |
| var->green.offset = 0; var->green.length = 8; |
| var->blue.offset = 0; var->blue.length = 8; |
| var->transp.offset = 0; var->transp.length = 0; |
| break; |
| } |
| } |
| |
| static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var, |
| struct fb_videomode *mode, int pix_fmt, int ystretch) |
| { |
| struct fb_info *info = fbi->info; |
| |
| set_pix_fmt(var, pix_fmt); |
| |
| var->xres = mode->xres; |
| var->yres = mode->yres; |
| var->xres_virtual = max(var->xres, var->xres_virtual); |
| if (ystretch) |
| var->yres_virtual = info->fix.smem_len / |
| (var->xres_virtual * (var->bits_per_pixel >> 3)); |
| else |
| var->yres_virtual = max(var->yres, var->yres_virtual); |
| var->grayscale = 0; |
| var->accel_flags = FB_ACCEL_NONE; |
| var->pixclock = mode->pixclock; |
| var->left_margin = mode->left_margin; |
| var->right_margin = mode->right_margin; |
| var->upper_margin = mode->upper_margin; |
| var->lower_margin = mode->lower_margin; |
| var->hsync_len = mode->hsync_len; |
| var->vsync_len = mode->vsync_len; |
| var->sync = mode->sync; |
| var->vmode = FB_VMODE_NONINTERLACED; |
| var->rotate = FB_ROTATE_UR; |
| } |
| |
| static int pxa168fb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| int pix_fmt; |
| |
| /* |
| * Determine which pixel format we're going to use. |
| */ |
| pix_fmt = determine_best_pix_fmt(var); |
| if (pix_fmt < 0) |
| return pix_fmt; |
| set_pix_fmt(var, pix_fmt); |
| fbi->pix_fmt = pix_fmt; |
| |
| /* |
| * Basic geometry sanity checks. |
| */ |
| if (var->xoffset + var->xres > var->xres_virtual) |
| return -EINVAL; |
| if (var->yoffset + var->yres > var->yres_virtual) |
| return -EINVAL; |
| if (var->xres + var->right_margin + |
| var->hsync_len + var->left_margin > 2048) |
| return -EINVAL; |
| if (var->yres + var->lower_margin + |
| var->vsync_len + var->upper_margin > 2048) |
| return -EINVAL; |
| |
| /* |
| * Check size of framebuffer. |
| */ |
| if (var->xres_virtual * var->yres_virtual * |
| (var->bits_per_pixel >> 3) > info->fix.smem_len) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* |
| * The hardware clock divider has an integer and a fractional |
| * stage: |
| * |
| * clk2 = clk_in / integer_divider |
| * clk_out = clk2 * (1 - (fractional_divider >> 12)) |
| * |
| * Calculate integer and fractional divider for given clk_in |
| * and clk_out. |
| */ |
| static void set_clock_divider(struct pxa168fb_info *fbi, |
| const struct fb_videomode *m) |
| { |
| int divider_int; |
| int needed_pixclk; |
| u64 div_result; |
| u32 x = 0; |
| |
| /* |
| * Notice: The field pixclock is used by linux fb |
| * is in pixel second. E.g. struct fb_videomode & |
| * struct fb_var_screeninfo |
| */ |
| |
| /* |
| * Check input values. |
| */ |
| if (!m || !m->pixclock || !m->refresh) { |
| dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n"); |
| return; |
| } |
| |
| /* |
| * Using PLL/AXI clock. |
| */ |
| x = 0x80000000; |
| |
| /* |
| * Calc divider according to refresh rate. |
| */ |
| div_result = 1000000000000ll; |
| do_div(div_result, m->pixclock); |
| needed_pixclk = (u32)div_result; |
| |
| divider_int = clk_get_rate(fbi->clk) / needed_pixclk; |
| |
| /* check whether divisor is too small. */ |
| if (divider_int < 2) { |
| dev_warn(fbi->dev, "Warning: clock source is too slow." |
| "Try smaller resolution\n"); |
| divider_int = 2; |
| } |
| |
| /* |
| * Set setting to reg. |
| */ |
| x |= divider_int; |
| writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV); |
| } |
| |
| static void set_dma_control0(struct pxa168fb_info *fbi) |
| { |
| u32 x; |
| |
| /* |
| * Set bit to enable graphics DMA. |
| */ |
| x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| x &= ~CFG_GRA_ENA_MASK; |
| x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0); |
| |
| /* |
| * If we are in a pseudo-color mode, we need to enable |
| * palette lookup. |
| */ |
| if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) |
| x |= 0x10000000; |
| |
| /* |
| * Configure hardware pixel format. |
| */ |
| x &= ~(0xF << 16); |
| x |= (fbi->pix_fmt >> 1) << 16; |
| |
| /* |
| * Check red and blue pixel swap. |
| * 1. source data swap |
| * 2. panel output data swap |
| */ |
| x &= ~(1 << 12); |
| x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12; |
| |
| writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| } |
| |
| static void set_dma_control1(struct pxa168fb_info *fbi, int sync) |
| { |
| u32 x; |
| |
| /* |
| * Configure default bits: vsync triggers DMA, gated clock |
| * enable, power save enable, configure alpha registers to |
| * display 100% graphics, and set pixel command. |
| */ |
| x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1); |
| x |= 0x2032ff81; |
| |
| /* |
| * We trigger DMA on the falling edge of vsync if vsync is |
| * active low, or on the rising edge if vsync is active high. |
| */ |
| if (!(sync & FB_SYNC_VERT_HIGH_ACT)) |
| x |= 0x08000000; |
| |
| writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1); |
| } |
| |
| static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| struct fb_var_screeninfo *var = &info->var; |
| int pixel_offset; |
| unsigned long addr; |
| |
| pixel_offset = (yoffset * var->xres_virtual) + xoffset; |
| |
| addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3)); |
| writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0); |
| } |
| |
| static void set_dumb_panel_control(struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| struct pxa168fb_mach_info *mi = dev_get_platdata(fbi->dev); |
| u32 x; |
| |
| /* |
| * Preserve enable flag. |
| */ |
| x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001; |
| |
| x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28; |
| x |= mi->gpio_output_data << 20; |
| x |= mi->gpio_output_mask << 12; |
| x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0; |
| x |= mi->invert_composite_blank ? 0x00000040 : 0; |
| x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0; |
| x |= mi->invert_pix_val_ena ? 0x00000010 : 0; |
| x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008; |
| x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004; |
| x |= mi->invert_pixclock ? 0x00000002 : 0; |
| |
| writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| } |
| |
| static void set_dumb_screen_dimensions(struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| struct fb_var_screeninfo *v = &info->var; |
| int x; |
| int y; |
| |
| x = v->xres + v->right_margin + v->hsync_len + v->left_margin; |
| y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin; |
| |
| writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL); |
| } |
| |
| static int pxa168fb_set_par(struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| struct fb_var_screeninfo *var = &info->var; |
| struct fb_videomode mode; |
| u32 x; |
| struct pxa168fb_mach_info *mi; |
| |
| mi = dev_get_platdata(fbi->dev); |
| |
| /* |
| * Set additional mode info. |
| */ |
| if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| else |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| info->fix.ypanstep = var->yres; |
| |
| /* |
| * Disable panel output while we setup the display. |
| */ |
| x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| |
| /* |
| * Configure global panel parameters. |
| */ |
| writel((var->yres << 16) | var->xres, |
| fbi->reg_base + LCD_SPU_V_H_ACTIVE); |
| |
| /* |
| * convet var to video mode |
| */ |
| fb_var_to_videomode(&mode, &info->var); |
| |
| /* Calculate clock divisor. */ |
| set_clock_divider(fbi, &mode); |
| |
| /* Configure dma ctrl regs. */ |
| set_dma_control0(fbi); |
| set_dma_control1(fbi, info->var.sync); |
| |
| /* |
| * Configure graphics DMA parameters. |
| */ |
| x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH); |
| x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3); |
| writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH); |
| writel((var->yres << 16) | var->xres, |
| fbi->reg_base + LCD_SPU_GRA_HPXL_VLN); |
| writel((var->yres << 16) | var->xres, |
| fbi->reg_base + LCD_SPU_GZM_HPXL_VLN); |
| |
| /* |
| * Configure dumb panel ctrl regs & timings. |
| */ |
| set_dumb_panel_control(info); |
| set_dumb_screen_dimensions(info); |
| |
| writel((var->left_margin << 16) | var->right_margin, |
| fbi->reg_base + LCD_SPU_H_PORCH); |
| writel((var->upper_margin << 16) | var->lower_margin, |
| fbi->reg_base + LCD_SPU_V_PORCH); |
| |
| /* |
| * Re-enable panel output. |
| */ |
| x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| |
| return 0; |
| } |
| |
| static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) |
| { |
| return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset; |
| } |
| |
| static u32 to_rgb(u16 red, u16 green, u16 blue) |
| { |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| |
| return (red << 16) | (green << 8) | blue; |
| } |
| |
| static int |
| pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, |
| unsigned int blue, unsigned int trans, struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| u32 val; |
| |
| if (info->var.grayscale) |
| red = green = blue = (19595 * red + 38470 * green + |
| 7471 * blue) >> 16; |
| |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) { |
| val = chan_to_field(red, &info->var.red); |
| val |= chan_to_field(green, &info->var.green); |
| val |= chan_to_field(blue , &info->var.blue); |
| fbi->pseudo_palette[regno] = val; |
| } |
| |
| if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) { |
| val = to_rgb(red, green, blue); |
| writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT); |
| writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL); |
| } |
| |
| return 0; |
| } |
| |
| static int pxa168fb_blank(int blank, struct fb_info *info) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| |
| fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1; |
| set_dumb_panel_control(info); |
| |
| return 0; |
| } |
| |
| static int pxa168fb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| set_graphics_start(info, var->xoffset, var->yoffset); |
| |
| return 0; |
| } |
| |
| static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id) |
| { |
| struct pxa168fb_info *fbi = dev_id; |
| u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR); |
| |
| if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) { |
| |
| writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK), |
| fbi->reg_base + SPU_IRQ_ISR); |
| |
| return IRQ_HANDLED; |
| } |
| return IRQ_NONE; |
| } |
| |
| static struct fb_ops pxa168fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = pxa168fb_check_var, |
| .fb_set_par = pxa168fb_set_par, |
| .fb_setcolreg = pxa168fb_setcolreg, |
| .fb_blank = pxa168fb_blank, |
| .fb_pan_display = pxa168fb_pan_display, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| static int pxa168fb_init_mode(struct fb_info *info, |
| struct pxa168fb_mach_info *mi) |
| { |
| struct pxa168fb_info *fbi = info->par; |
| struct fb_var_screeninfo *var = &info->var; |
| int ret = 0; |
| u32 total_w, total_h, refresh; |
| u64 div_result; |
| const struct fb_videomode *m; |
| |
| /* |
| * Set default value |
| */ |
| refresh = DEFAULT_REFRESH; |
| |
| /* try to find best video mode. */ |
| m = fb_find_best_mode(&info->var, &info->modelist); |
| if (m) |
| fb_videomode_to_var(&info->var, m); |
| |
| /* Init settings. */ |
| var->xres_virtual = var->xres; |
| var->yres_virtual = info->fix.smem_len / |
| (var->xres_virtual * (var->bits_per_pixel >> 3)); |
| dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n", |
| var->xres, var->yres); |
| |
| /* correct pixclock. */ |
| total_w = var->xres + var->left_margin + var->right_margin + |
| var->hsync_len; |
| total_h = var->yres + var->upper_margin + var->lower_margin + |
| var->vsync_len; |
| |
| div_result = 1000000000000ll; |
| do_div(div_result, total_w * total_h * refresh); |
| var->pixclock = (u32)div_result; |
| |
| return ret; |
| } |
| |
| static int pxa168fb_probe(struct platform_device *pdev) |
| { |
| struct pxa168fb_mach_info *mi; |
| struct fb_info *info = 0; |
| struct pxa168fb_info *fbi = 0; |
| struct resource *res; |
| struct clk *clk; |
| int irq, ret; |
| |
| mi = dev_get_platdata(&pdev->dev); |
| if (mi == NULL) { |
| dev_err(&pdev->dev, "no platform data defined\n"); |
| return -EINVAL; |
| } |
| |
| clk = devm_clk_get(&pdev->dev, "LCDCLK"); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "unable to get LCDCLK"); |
| return PTR_ERR(clk); |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "no IO memory defined\n"); |
| return -ENOENT; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no IRQ defined\n"); |
| return -ENOENT; |
| } |
| |
| info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev); |
| if (info == NULL) { |
| return -ENOMEM; |
| } |
| |
| /* Initialize private data */ |
| fbi = info->par; |
| fbi->info = info; |
| fbi->clk = clk; |
| fbi->dev = info->dev = &pdev->dev; |
| fbi->panel_rbswap = mi->panel_rbswap; |
| fbi->is_blanked = 0; |
| fbi->active = mi->active; |
| |
| /* |
| * Initialise static fb parameters. |
| */ |
| info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | |
| FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; |
| info->node = -1; |
| strlcpy(info->fix.id, mi->id, 16); |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.type_aux = 0; |
| info->fix.xpanstep = 0; |
| info->fix.ypanstep = 0; |
| info->fix.ywrapstep = 0; |
| info->fix.mmio_start = res->start; |
| info->fix.mmio_len = resource_size(res); |
| info->fix.accel = FB_ACCEL_NONE; |
| info->fbops = &pxa168fb_ops; |
| info->pseudo_palette = fbi->pseudo_palette; |
| |
| /* |
| * Map LCD controller registers. |
| */ |
| fbi->reg_base = devm_ioremap_nocache(&pdev->dev, res->start, |
| resource_size(res)); |
| if (fbi->reg_base == NULL) { |
| ret = -ENOMEM; |
| goto failed_free_info; |
| } |
| |
| /* |
| * Allocate framebuffer memory. |
| */ |
| info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE); |
| |
| info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len, |
| &fbi->fb_start_dma, GFP_KERNEL); |
| if (info->screen_base == NULL) { |
| ret = -ENOMEM; |
| goto failed_free_info; |
| } |
| |
| info->fix.smem_start = (unsigned long)fbi->fb_start_dma; |
| set_graphics_start(info, 0, 0); |
| |
| /* |
| * Set video mode according to platform data. |
| */ |
| set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1); |
| |
| fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist); |
| |
| /* |
| * init video mode data. |
| */ |
| pxa168fb_init_mode(info, mi); |
| |
| /* |
| * Fill in sane defaults. |
| */ |
| ret = pxa168fb_check_var(&info->var, info); |
| if (ret) |
| goto failed_free_fbmem; |
| |
| /* |
| * enable controller clock |
| */ |
| clk_prepare_enable(fbi->clk); |
| |
| pxa168fb_set_par(info); |
| |
| /* |
| * Configure default register values. |
| */ |
| writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR); |
| writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL); |
| writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1); |
| writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN); |
| writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0); |
| writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1), |
| fbi->reg_base + LCD_SPU_SRAM_PARA1); |
| |
| /* |
| * Allocate color map. |
| */ |
| if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { |
| ret = -ENOMEM; |
| goto failed_free_clk; |
| } |
| |
| /* |
| * Register irq handler. |
| */ |
| ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq, |
| IRQF_SHARED, info->fix.id, fbi); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "unable to request IRQ\n"); |
| ret = -ENXIO; |
| goto failed_free_cmap; |
| } |
| |
| /* |
| * Enable GFX interrupt |
| */ |
| writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA); |
| |
| /* |
| * Register framebuffer. |
| */ |
| ret = register_framebuffer(info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret); |
| ret = -ENXIO; |
| goto failed_free_cmap; |
| } |
| |
| platform_set_drvdata(pdev, fbi); |
| return 0; |
| |
| failed_free_cmap: |
| fb_dealloc_cmap(&info->cmap); |
| failed_free_clk: |
| clk_disable_unprepare(fbi->clk); |
| failed_free_fbmem: |
| dma_free_coherent(fbi->dev, info->fix.smem_len, |
| info->screen_base, fbi->fb_start_dma); |
| failed_free_info: |
| kfree(info); |
| |
| dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret); |
| return ret; |
| } |
| |
| static int pxa168fb_remove(struct platform_device *pdev) |
| { |
| struct pxa168fb_info *fbi = platform_get_drvdata(pdev); |
| struct fb_info *info; |
| int irq; |
| unsigned int data; |
| |
| if (!fbi) |
| return 0; |
| |
| /* disable DMA transfer */ |
| data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| data &= ~CFG_GRA_ENA_MASK; |
| writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| |
| info = fbi->info; |
| |
| unregister_framebuffer(info); |
| |
| writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA); |
| |
| if (info->cmap.len) |
| fb_dealloc_cmap(&info->cmap); |
| |
| irq = platform_get_irq(pdev, 0); |
| |
| dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len), |
| info->screen_base, info->fix.smem_start); |
| |
| clk_disable_unprepare(fbi->clk); |
| |
| framebuffer_release(info); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pxa168fb_driver = { |
| .driver = { |
| .name = "pxa168-fb", |
| }, |
| .probe = pxa168fb_probe, |
| .remove = pxa168fb_remove, |
| }; |
| |
| module_platform_driver(pxa168fb_driver); |
| |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> " |
| "Green Wan <gwan@marvell.com>"); |
| MODULE_DESCRIPTION("Framebuffer driver for PXA168/910"); |
| MODULE_LICENSE("GPL"); |