| /* |
| * max77804_charger.c |
| * Samsung max77804 Charger Driver |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/mfd/max77804.h> |
| #include <linux/mfd/max77804-private.h> |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| #include <linux/usb_notify.h> |
| #endif |
| |
| #define ENABLE 1 |
| #define DISABLE 0 |
| |
| #define RECOVERY_DELAY 3000 |
| #define RECOVERY_CNT 5 |
| #define REDUCE_CURRENT_STEP 100 |
| #define MINIMUM_INPUT_CURRENT 300 |
| |
| #define SIOP_INPUT_LIMIT_CURRENT 1200 |
| #define SIOP_CHARGING_LIMIT_CURRENT 1000 |
| #define SIOP_WIRELESS_INPUT_LIMIT_CURRENT 620 |
| #define SIOP_WIRELESS_CHARGING_LIMIT_CURRENT 680 |
| #define SLOW_CHARGING_CURRENT_STANDARD 400 |
| |
| struct max77804_charger_data { |
| struct max77804_dev *max77804; |
| |
| struct power_supply psy_chg; |
| |
| struct workqueue_struct *wqueue; |
| struct work_struct chgin_work; |
| struct delayed_work isr_work; |
| struct delayed_work recovery_work; /* softreg recovery work */ |
| struct delayed_work wpc_work; /* wpc detect work */ |
| struct delayed_work chgin_init_work; /* chgin init work */ |
| |
| /* mutex */ |
| struct mutex irq_lock; |
| struct mutex ops_lock; |
| |
| /* wakelock */ |
| struct wake_lock recovery_wake_lock; |
| struct wake_lock wpc_wake_lock; |
| struct wake_lock chgin_wake_lock; |
| |
| unsigned int is_charging; |
| unsigned int charging_type; |
| unsigned int battery_state; |
| unsigned int battery_present; |
| unsigned int cable_type; |
| unsigned int charging_current_max; |
| unsigned int charging_current; |
| unsigned int input_current_limit; |
| unsigned int vbus_state; |
| int aicl_on; |
| int status; |
| int siop_level; |
| int uvlo_attach_flag; |
| int uvlo_attach_cable_type; |
| |
| int irq_bypass; |
| #if defined(CONFIG_CHARGER_MAX77804) |
| int irq_batp; |
| #else |
| int irq_therm; |
| #endif |
| int irq_battery; |
| int irq_chg; |
| #if defined(CONFIG_CHARGER_MAX77804) |
| int irq_wcin; |
| #endif |
| int irq_chgin; |
| |
| /* software regulation */ |
| bool soft_reg_state; |
| int soft_reg_current; |
| |
| /* unsufficient power */ |
| bool reg_loop_deted; |
| |
| /* wireless charge, w(wpc), v(vbus) */ |
| int wc_w_gpio; |
| int wc_w_irq; |
| int wc_w_state; |
| int wc_v_gpio; |
| int wc_v_irq; |
| int wc_v_state; |
| bool wc_pwr_det; |
| int soft_reg_recovery_cnt; |
| |
| int pmic_ver; |
| int input_curr_limit_step; |
| int wpc_input_curr_limit_step; |
| int charging_curr_step; |
| |
| sec_battery_platform_data_t *pdata; |
| }; |
| |
| static enum power_supply_property sec_charger_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_CURRENT_AVG, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, |
| #ifdef WPC_CHECK_CVPRM_FEATURE |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| #endif |
| }; |
| |
| static void max77804_charger_initialize(struct max77804_charger_data *charger); |
| static int max77804_get_vbus_state(struct max77804_charger_data *charger); |
| static int max77804_get_charger_state(struct max77804_charger_data *charger); |
| |
| #if 0 |
| static void max77804_dump_reg(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| u32 reg_addr; |
| pr_info("%s\n", __func__); |
| |
| for (reg_addr = 0xB0; reg_addr <= 0xC5; reg_addr++) { |
| max77804_read_reg(charger->max77804->i2c, reg_addr, ®_data); |
| pr_info("max77804: c: 0x%02x(0x%02x)\n", reg_addr, reg_data); |
| } |
| } |
| #endif |
| |
| static bool max77804_charger_unlock(struct max77804_charger_data *chg_data) |
| { |
| struct i2c_client *i2c = chg_data->max77804->i2c; |
| u8 reg_data; |
| u8 chgprot; |
| int retry_cnt = 0; |
| bool need_init = false; |
| |
| do { |
| max77804_read_reg(i2c, MAX77804_CHG_REG_CHG_CNFG_06, ®_data); |
| chgprot = ((reg_data & 0x0C) >> 2); |
| if (chgprot != 0x03) { |
| pr_err("%s: unlock err, chgprot(0x%x), retry(%d)\n", |
| __func__, chgprot, retry_cnt); |
| max77804_write_reg(i2c, MAX77804_CHG_REG_CHG_CNFG_06, |
| (0x03 << 2)); |
| need_init = true; |
| msleep(20); |
| } else { |
| pr_debug("%s: unlock success, chgprot(0x%x)\n", |
| __func__, chgprot); |
| break; |
| } |
| } while ((chgprot != 0x03) && (++retry_cnt < 10)); |
| |
| return need_init; |
| } |
| |
| static void check_charger_unlock_state(struct max77804_charger_data *chg_data) |
| { |
| bool need_reg_init; |
| pr_debug("%s\n", __func__); |
| |
| need_reg_init = max77804_charger_unlock(chg_data); |
| if (need_reg_init) { |
| pr_err("%s: charger locked state, reg init\n", __func__); |
| max77804_charger_initialize(chg_data); |
| } |
| } |
| |
| static int max77804_get_battery_present(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| if (max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_OK, ®_data) < 0) { |
| /* Eventhough there is an error, |
| don't do power-off */ |
| return 1; |
| } |
| |
| pr_debug("%s: CHG_INT_OK(0x%02x)\n", __func__, reg_data); |
| |
| reg_data = ((reg_data & MAX77804_DETBAT) >> MAX77804_DETBAT_SHIFT); |
| |
| return reg_data; |
| } |
| |
| static void max77804_set_charger_state(struct max77804_charger_data *charger, |
| int enable) |
| { |
| u8 reg_data; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, ®_data); |
| |
| if (enable) |
| reg_data |= MAX77804_MODE_CHGR; |
| else |
| reg_data &= ~MAX77804_MODE_CHGR; |
| |
| pr_debug("%s: CHG_CNFG_00(0x%02x)\n", __func__, reg_data); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, reg_data); |
| } |
| |
| static void max77804_set_buck(struct max77804_charger_data *charger, |
| int enable) |
| { |
| u8 reg_data; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, ®_data); |
| |
| if (enable) |
| reg_data |= MAX77804_MODE_BUCK; |
| else |
| reg_data &= ~MAX77804_MODE_BUCK; |
| |
| pr_debug("%s: CHG_CNFG_00(0x%02x)\n", __func__, reg_data); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, reg_data); |
| } |
| |
| #ifdef WPC_CHECK_CVPRM_FEATURE |
| static void max77804_check_cvprm(struct max77804_charger_data *charger, u8 data) |
| { |
| u8 reg_data; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_04, ®_data); |
| if ((reg_data & 0x1f) != data) { |
| reg_data &= ~(0x1f << 0); |
| reg_data |= (data << 0); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_04, reg_data); |
| } |
| } |
| |
| static int max77804_get_charge_votage(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| int charge_voltage; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_04, ®_data); |
| |
| reg_data &= 0x1f; |
| if (reg_data == 0x1c) { |
| charge_voltage = 4340; |
| } else { |
| if (reg_data > 0x1c) { |
| reg_data -= 1; |
| } |
| charge_voltage = (reg_data * 25) + 3650; |
| } |
| |
| return charge_voltage; |
| } |
| #endif |
| |
| #if 0 |
| static void max77804_check_slow_charging(struct max77804_charger_data *charger, int set_current_reg) |
| { |
| /* under 500mA, slow rate */ |
| if (set_current_reg <= (SLOW_CHARGING_CURRENT_STANDARD / charger->input_curr_limit_step) && |
| (charger->cable_type != POWER_SUPPLY_TYPE_BATTERY)) { |
| charger->aicl_on = true; |
| pr_info("%s: slow charging on : set_current_reg(0x%02x), cable type(%d)\n", __func__, set_current_reg, charger->cable_type); |
| } |
| else |
| charger->aicl_on = false; |
| } |
| |
| static void max77804_change_charge_path(struct max77804_charger_data *charger, |
| int path) |
| { |
| u8 cnfg12, ctrl3; |
| |
| if (path == POWER_SUPPLY_TYPE_WIRELESS) { |
| cnfg12 = (0 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| ctrl3 = (1 << CTRL3_JIGSET_SHIFT); |
| } else { |
| cnfg12 = (1 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| ctrl3 = (0 << CTRL3_JIGSET_SHIFT); |
| } |
| |
| if (charger->pmic_ver == 0x04) |
| max77804_update_reg(charger->max77804->muic, MAX77804_MUIC_REG_CTRL3, |
| ctrl3, CTRL3_JIGSET_MASK); |
| max77804_update_reg(charger->max77804->i2c, MAX77804_CHG_REG_CHG_CNFG_12, |
| cnfg12, CHG_CNFG_12_CHGINSEL_MASK); |
| } |
| #endif |
| |
| static void max77804_set_input_current(struct max77804_charger_data *charger, |
| int cur) |
| { |
| int set_current_reg, now_current_reg; |
| int vbus_state, curr_step, delay; |
| u8 set_reg, reg_data; |
| int chg_state; |
| |
| mutex_lock(&charger->ops_lock); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data |= (0x1 << 6); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| |
| if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) { |
| set_reg = MAX77804_CHG_REG_CHG_CNFG_10; |
| charger->input_curr_limit_step = 20; |
| } else { |
| set_reg = MAX77804_CHG_REG_CHG_CNFG_09; |
| charger->input_curr_limit_step = 25; |
| } |
| |
| if (cur <= 0) { |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, 0); |
| max77804_set_buck(charger, DISABLE); |
| goto exit; |
| } else |
| max77804_set_buck(charger, ENABLE); |
| |
| set_current_reg = cur / charger->input_curr_limit_step; |
| if (charger->cable_type == POWER_SUPPLY_TYPE_BATTERY) |
| goto set_input_current; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| set_reg, ®_data); |
| if (reg_data == set_current_reg) { |
| /* check uvlo */ |
| while((set_current_reg > (MINIMUM_INPUT_CURRENT / charger->input_curr_limit_step)) && (set_current_reg < 255)) { |
| vbus_state = max77804_get_vbus_state(charger); |
| if (((vbus_state == 0x00) || (vbus_state == 0x01)) && |
| (charger->cable_type != POWER_SUPPLY_TYPE_WIRELESS)) { |
| /* UVLO */ |
| set_current_reg -= 5; |
| if (set_current_reg < (MINIMUM_INPUT_CURRENT / charger->input_curr_limit_step)) |
| set_current_reg = (MINIMUM_INPUT_CURRENT / charger->input_curr_limit_step); |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, set_current_reg); |
| pr_info("%s: set_current_reg(0x%02x)\n", __func__, set_current_reg); |
| chg_state = max77804_get_charger_state(charger); |
| if ((chg_state != POWER_SUPPLY_STATUS_CHARGING) && |
| (chg_state != POWER_SUPPLY_STATUS_FULL)) |
| break; |
| msleep(50); |
| } else |
| break; |
| } |
| goto exit; |
| } |
| |
| if (reg_data == 0) { |
| now_current_reg = SOFT_CHG_START_CURR / charger->input_curr_limit_step; |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, now_current_reg); |
| msleep(SOFT_CHG_START_DUR); |
| } else |
| now_current_reg = reg_data; |
| |
| if (cur <= 1000) { |
| curr_step = 1; |
| delay = 50; |
| } else { |
| curr_step = SOFT_CHG_CURR_STEP / charger->input_curr_limit_step; |
| delay = SOFT_CHG_STEP_DUR; |
| } |
| now_current_reg += (curr_step); |
| |
| while (now_current_reg < set_current_reg && |
| charger->cable_type != POWER_SUPPLY_TYPE_BATTERY) |
| { |
| now_current_reg = min(now_current_reg, set_current_reg); |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, now_current_reg); |
| msleep(delay); |
| |
| vbus_state = max77804_get_vbus_state(charger); |
| if (((vbus_state == 0x00) || (vbus_state == 0x01)) && |
| (charger->cable_type != POWER_SUPPLY_TYPE_WIRELESS)) { |
| /* UVLO */ |
| if (now_current_reg > (curr_step * 3)) |
| now_current_reg -= (curr_step * 3); |
| /* current limit 300mA */ |
| if (now_current_reg < (MINIMUM_INPUT_CURRENT / charger->input_curr_limit_step)) |
| now_current_reg = (MINIMUM_INPUT_CURRENT / charger->input_curr_limit_step); |
| curr_step /= 2; |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, now_current_reg); |
| pr_info("%s: now_current_reg(0x%02x)\n", __func__, now_current_reg); |
| chg_state = max77804_get_charger_state(charger); |
| if ((chg_state != POWER_SUPPLY_STATUS_CHARGING) && |
| (chg_state != POWER_SUPPLY_STATUS_FULL)) |
| goto exit; |
| if (curr_step < 2) |
| goto exit; |
| msleep(50); |
| } else |
| now_current_reg += (curr_step); |
| } |
| |
| set_input_current: |
| pr_info("%s: reg_data(0x%02x), input(%d)\n", |
| __func__, set_current_reg, cur); |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, set_current_reg); |
| exit: |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data &= ~(0x1 << 6); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| mutex_unlock(&charger->ops_lock); |
| } |
| |
| static int max77804_get_input_current(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| int get_current = 0; |
| |
| if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) { |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_10, ®_data); |
| pr_info("%s: CHG_CNFG_10(0x%02x)\n", __func__, reg_data); |
| charger->input_curr_limit_step = 20; |
| } else { |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_09, ®_data); |
| charger->input_curr_limit_step = 25; |
| get_current = reg_data * charger->input_curr_limit_step; |
| pr_info("%s: CHG_CNFG_09(0x%02x)\n", __func__, reg_data); |
| } |
| get_current = reg_data * charger->input_curr_limit_step; |
| |
| pr_debug("%s: get input current: %dmA\n", __func__, get_current); |
| return get_current; |
| } |
| |
| static void max77804_set_topoff_current(struct max77804_charger_data *charger, |
| int cur, int timeout) |
| { |
| u8 reg_data; |
| |
| if (cur >= 350) |
| reg_data = 0x07; |
| else if (cur >= 300) |
| reg_data = 0x06; |
| else if (cur >= 250) |
| reg_data = 0x05; |
| else if (cur >= 200) |
| reg_data = 0x04; |
| else if (cur >= 175) |
| reg_data = 0x03; |
| else if (cur >= 150) |
| reg_data = 0x02; |
| else if (cur >= 125) |
| reg_data = 0x01; |
| else |
| reg_data = 0x00; |
| |
| /* the unit of timeout is second*/ |
| timeout = timeout / 60; |
| reg_data |= ((timeout / 10) << 3); |
| pr_info("%s: reg_data(0x%02x), topoff(%d)\n", __func__, reg_data, cur); |
| |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_03, reg_data); |
| } |
| |
| static void max77804_set_charge_current(struct max77804_charger_data *charger, |
| int cur) |
| { |
| u8 reg_data = 0; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, ®_data); |
| reg_data &= ~MAX77804_CHG_CC; |
| |
| if (!cur) { |
| /* No charger */ |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, reg_data); |
| } else { |
| reg_data |= ((cur * 10 / charger->charging_curr_step) << 0); |
| |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, reg_data); |
| } |
| pr_info("%s: reg_data(0x%02x), charge(%d)\n", |
| __func__, reg_data, cur); |
| } |
| |
| /* |
| static int max77804_get_charge_current(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| int get_current = 0; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, ®_data); |
| pr_debug("%s: CHG_CNFG_02(0x%02x)\n", __func__, reg_data); |
| |
| reg_data &= MAX77804_CHG_CC; |
| get_current = reg_data * charger->charging_curr_step / 10; |
| |
| pr_debug("%s: get charge current: %dmA\n", __func__, get_current); |
| return get_current; |
| } |
| */ |
| |
| /* in soft regulation, current recovery operation */ |
| static void max77804_recovery_work(struct work_struct *work) |
| { |
| struct max77804_charger_data *charger = container_of(work, |
| struct max77804_charger_data, |
| recovery_work.work); |
| u8 dtls_00, chgin_dtls; |
| u8 dtls_01, chg_dtls; |
| u8 dtls_02, byp_dtls; |
| pr_debug("%s\n", __func__); |
| |
| wake_unlock(&charger->recovery_wake_lock); |
| if ((!charger->is_charging) || mutex_is_locked(&charger->ops_lock) || |
| (charger->cable_type != POWER_SUPPLY_TYPE_MAINS)) |
| return; |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_00, &dtls_00); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, &dtls_01); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_02, &dtls_02); |
| |
| chgin_dtls = ((dtls_00 & MAX77804_CHGIN_DTLS) >> |
| MAX77804_CHGIN_DTLS_SHIFT); |
| chg_dtls = ((dtls_01 & MAX77804_CHG_DTLS) >> |
| MAX77804_CHG_DTLS_SHIFT); |
| byp_dtls = ((dtls_02 & MAX77804_BYP_DTLS) >> |
| MAX77804_BYP_DTLS_SHIFT); |
| |
| if ((charger->soft_reg_recovery_cnt < RECOVERY_CNT) && ( |
| (chgin_dtls == 0x3) && (chg_dtls != 0x8) && (byp_dtls == 0x0))) { |
| pr_info("%s: try to recovery, cnt(%d)\n", __func__, |
| (charger->soft_reg_recovery_cnt + 1)); |
| |
| if (charger->siop_level < 100 && |
| charger->cable_type == POWER_SUPPLY_TYPE_MAINS) { |
| pr_info("%s : LCD on status and revocer current\n", __func__); |
| max77804_set_input_current(charger, |
| SIOP_INPUT_LIMIT_CURRENT); |
| } else { |
| max77804_set_input_current(charger, |
| charger->charging_current_max); |
| } |
| } else { |
| pr_info("%s: fail to recovery, cnt(%d)\n", __func__, |
| (charger->soft_reg_recovery_cnt + 1)); |
| |
| pr_info("%s: CHGIN(0x%x), CHG(0x%x), BYP(0x%x)\n", |
| __func__, chgin_dtls, chg_dtls, byp_dtls); |
| |
| /* schedule softreg recovery wq */ |
| if (charger->soft_reg_recovery_cnt < RECOVERY_CNT) { |
| wake_lock(&charger->recovery_wake_lock); |
| queue_delayed_work(charger->wqueue, &charger->recovery_work, |
| msecs_to_jiffies(RECOVERY_DELAY)); |
| } else { |
| pr_info("%s: recovery cnt(%d) is over\n", |
| __func__, RECOVERY_CNT); |
| } |
| } |
| |
| /* add recovery try count */ |
| charger->soft_reg_recovery_cnt++; |
| } |
| |
| static void reduce_input_current(struct max77804_charger_data *charger, int cur) |
| { |
| u8 set_reg; |
| u8 set_value; |
| unsigned int min_input_current = 0; |
| |
| if ((!charger->is_charging) || mutex_is_locked(&charger->ops_lock) || |
| (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS)) |
| return; |
| set_reg = MAX77804_CHG_REG_CHG_CNFG_09; |
| min_input_current = MINIMUM_INPUT_CURRENT; |
| charger->input_curr_limit_step = 25; |
| |
| if (!max77804_read_reg(charger->max77804->i2c, |
| set_reg, &set_value)) { |
| if ((set_value <= (min_input_current / charger->input_curr_limit_step)) || |
| (set_value <= (cur / charger->input_curr_limit_step))) |
| return; |
| set_value -= (cur / charger->input_curr_limit_step); |
| set_value = (set_value < (min_input_current / charger->input_curr_limit_step)) ? |
| (min_input_current / charger->input_curr_limit_step) : set_value; |
| max77804_write_reg(charger->max77804->i2c, |
| set_reg, set_value); |
| pr_info("%s: set current: reg:(0x%x), val:(0x%x)\n", |
| __func__, set_reg, set_value); |
| } |
| if(charger->cable_type == POWER_SUPPLY_TYPE_MAINS) { |
| /* schedule softreg recovery wq */ |
| cancel_delayed_work_sync(&charger->recovery_work); |
| wake_lock(&charger->recovery_wake_lock); |
| queue_delayed_work(charger->wqueue, &charger->recovery_work, |
| msecs_to_jiffies(RECOVERY_DELAY)); |
| } |
| } |
| |
| static int max77804_get_vbus_state(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_00, ®_data); |
| if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) |
| reg_data = ((reg_data & MAX77804_WCIN_DTLS) >> |
| MAX77804_WCIN_DTLS_SHIFT); |
| else |
| reg_data = ((reg_data & MAX77804_CHGIN_DTLS) >> |
| MAX77804_CHGIN_DTLS_SHIFT); |
| |
| switch (reg_data) { |
| case 0x00: |
| pr_info("%s: VBUS is invalid. CHGIN < CHGIN_UVLO\n", |
| __func__); |
| break; |
| case 0x01: |
| pr_info("%s: VBUS is invalid. CHGIN < MBAT+CHGIN2SYS" \ |
| "and CHGIN > CHGIN_UVLO\n", __func__); |
| break; |
| case 0x02: |
| pr_info("%s: VBUS is invalid. CHGIN > CHGIN_OVLO", |
| __func__); |
| break; |
| case 0x03: |
| pr_info("%s: VBUS is valid. CHGIN < CHGIN_OVLO", __func__); |
| break; |
| default: |
| break; |
| } |
| |
| return reg_data; |
| } |
| |
| static int max77804_get_charger_state(struct max77804_charger_data *charger) |
| { |
| int state; |
| u8 reg_data; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, ®_data); |
| reg_data = ((reg_data & MAX77804_CHG_DTLS) >> MAX77804_CHG_DTLS_SHIFT); |
| pr_info("%s: CHG_DTLS : 0x%2x\n", __func__, reg_data); |
| |
| switch (reg_data) { |
| case 0x0: |
| case 0x1: |
| case 0x2: |
| state = POWER_SUPPLY_STATUS_CHARGING; |
| break; |
| case 0x3: |
| case 0x4: |
| state = POWER_SUPPLY_STATUS_FULL; |
| break; |
| case 0x5: |
| case 0x6: |
| case 0x7: |
| state = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| case 0x8: |
| case 0xA: |
| case 0xB: |
| state = POWER_SUPPLY_STATUS_DISCHARGING; |
| break; |
| default: |
| state = POWER_SUPPLY_STATUS_UNKNOWN; |
| break; |
| } |
| |
| return state; |
| } |
| |
| static int max77804_get_health_state(struct max77804_charger_data *charger) |
| { |
| int state; |
| int vbus_state; |
| int retry_cnt; |
| u8 chg_dtls_00, chg_dtls, reg_data; |
| u8 chg_cnfg_00, chg_cnfg_01 ,chg_cnfg_02, chg_cnfg_04, chg_cnfg_09, chg_cnfg_12; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, ®_data); |
| reg_data = ((reg_data & MAX77804_BAT_DTLS) >> MAX77804_BAT_DTLS_SHIFT); |
| |
| pr_info("%s: reg_data(0x%x)\n", __func__, reg_data); |
| switch (reg_data) { |
| case 0x00: |
| pr_info("%s: No battery and the charger is suspended\n", |
| __func__); |
| state = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| break; |
| case 0x01: |
| pr_info("%s: battery is okay " |
| "but its voltage is low(~VPQLB)\n", __func__); |
| state = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| case 0x02: |
| pr_info("%s: battery dead\n", __func__); |
| state = POWER_SUPPLY_HEALTH_DEAD; |
| break; |
| case 0x03: |
| state = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| case 0x04: |
| pr_info("%s: battery is okay" \ |
| "but its voltage is low\n", __func__); |
| state = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| case 0x05: |
| pr_info("%s: battery ovp\n", __func__); |
| state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| break; |
| default: |
| pr_info("%s: battery unknown : 0x%d\n", __func__, reg_data); |
| state = POWER_SUPPLY_HEALTH_UNKNOWN; |
| break; |
| } |
| |
| if (state == POWER_SUPPLY_HEALTH_GOOD) { |
| union power_supply_propval value; |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| /* VBUS OVP state return battery OVP state */ |
| vbus_state = max77804_get_vbus_state(charger); |
| /* read CHG_DTLS and detecting battery terminal error */ |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, &chg_dtls); |
| chg_dtls = ((chg_dtls & MAX77804_CHG_DTLS) >> |
| MAX77804_CHG_DTLS_SHIFT); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, &chg_cnfg_00); |
| |
| /* print the log at the abnormal case */ |
| if((charger->is_charging == 1) && (chg_dtls & 0x08)) { |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_00, &chg_dtls_00); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_01, &chg_cnfg_01); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, &chg_cnfg_02); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_04, &chg_cnfg_04); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_09, &chg_cnfg_09); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_12, &chg_cnfg_12); |
| |
| pr_info("%s: CHG_DTLS_00(0x%x), CHG_DTLS_01(0x%x), CHG_CNFG_00(0x%x)\n", |
| __func__, chg_dtls_00, chg_dtls, chg_cnfg_00); |
| pr_info("%s: CHG_CNFG_01(0x%x), CHG_CNFG_02(0x%x), CHG_CNFG_04(0x%x)\n", |
| __func__, chg_cnfg_01, chg_cnfg_02, chg_cnfg_04); |
| pr_info("%s: CHG_CNFG_09(0x%x), CHG_CNFG_12(0x%x)\n", |
| __func__, chg_cnfg_09, chg_cnfg_12); |
| } |
| |
| pr_info("%s: vbus_state : 0x%d, chg_dtls : 0x%d\n", __func__, vbus_state, chg_dtls); |
| /* OVP is higher priority */ |
| if (vbus_state == 0x02) { /* CHGIN_OVLO */ |
| pr_info("%s: vbus ovp\n", __func__); |
| state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) { |
| retry_cnt = 0; |
| do { |
| msleep(50); |
| vbus_state = max77804_get_vbus_state(charger); |
| } while((retry_cnt++ < 2) && (vbus_state == 0x02)); |
| if (vbus_state == 0x02) { |
| state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| panic("wpc and ovp"); |
| } else |
| state = POWER_SUPPLY_HEALTH_GOOD; |
| } |
| } else if (((vbus_state == 0x0) || (vbus_state == 0x01)) &&(chg_dtls & 0x08) && \ |
| (chg_cnfg_00 & MAX77804_MODE_BUCK) && \ |
| (chg_cnfg_00 & MAX77804_MODE_CHGR) && \ |
| (charger->cable_type != POWER_SUPPLY_TYPE_WIRELESS)) { |
| pr_info("%s: vbus is under\n", __func__); |
| state = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| } else if((value.intval == POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && \ |
| !((vbus_state == 0x0) || (vbus_state == 0x01))){ |
| max77804_set_input_current(charger, |
| charger->charging_current_max); |
| } |
| } |
| |
| return state; |
| } |
| |
| static int sec_chg_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct max77804_charger_data *charger = |
| container_of(psy, struct max77804_charger_data, psy_chg); |
| u8 reg_data; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = POWER_SUPPLY_TYPE_BATTERY; |
| if (max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_OK, ®_data) == 0) { |
| if (reg_data & MAX77804_WCIN_OK) { |
| val->intval = POWER_SUPPLY_TYPE_WIRELESS; |
| charger->wc_w_state = 1; |
| } else if (reg_data & MAX77804_CHGIN_OK) { |
| val->intval = POWER_SUPPLY_TYPE_MAINS; |
| } |
| } |
| break; |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = max77804_get_charger_state(charger); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = max77804_get_health_state(charger); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = charger->charging_current_max; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| val->intval = charger->charging_current; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = max77804_get_input_current(charger); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| if (!charger->is_charging) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| else if (charger->aicl_on) |
| { |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_SLOW; |
| pr_info("%s: slow-charging mode\n", __func__); |
| } |
| else |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = max77804_get_battery_present(charger); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| break; |
| #ifdef WPC_CHECK_CVPRM_FEATURE |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = max77804_get_charge_votage(charger); |
| break; |
| #endif |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int sec_chg_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct max77804_charger_data *charger = |
| container_of(psy, struct max77804_charger_data, psy_chg); |
| union power_supply_propval value; |
| int set_charging_current, set_charging_current_max; |
| const int usb_charging_current = charger->pdata->charging_current[ |
| POWER_SUPPLY_TYPE_USB].fast_charging_current; |
| u8 chg_cnfg_00 = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| charger->status = val->intval; |
| break; |
| /* val->intval : type */ |
| case POWER_SUPPLY_PROP_ONLINE: |
| /* check and unlock */ |
| check_charger_unlock_state(charger); |
| |
| if (val->intval == POWER_SUPPLY_TYPE_POWER_SHARING) { |
| psy_do_property("ps", get, |
| POWER_SUPPLY_PROP_STATUS, value); |
| chg_cnfg_00 = CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK; |
| |
| if (value.intval) { |
| max77804_update_reg(charger->max77804->i2c, MAX77804_CHG_REG_CHG_CNFG_00, |
| chg_cnfg_00, chg_cnfg_00); |
| pr_info("%s: ps enable\n", __func__); |
| } else { |
| max77804_update_reg(charger->max77804->i2c, MAX77804_CHG_REG_CHG_CNFG_00, |
| 0, chg_cnfg_00); |
| pr_info("%s: ps disable\n", __func__); |
| } |
| break; |
| } |
| |
| charger->cable_type = val->intval; |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| if (val->intval == POWER_SUPPLY_TYPE_BATTERY) { |
| charger->is_charging = false; |
| charger->aicl_on = false; |
| charger->soft_reg_recovery_cnt = 0; |
| set_charging_current = 0; |
| set_charging_current_max = |
| charger->pdata->charging_current[ |
| POWER_SUPPLY_TYPE_USB].input_current_limit; |
| |
| chg_cnfg_00 &= ~(CHG_CNFG_00_CHG_MASK |
| | CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); |
| |
| set_charging_current_max = |
| charger->pdata->charging_current[ |
| POWER_SUPPLY_TYPE_USB].input_current_limit; |
| |
| max77804_update_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, |
| chg_cnfg_00, |
| (CHG_CNFG_00_CHG_MASK |
| | CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK)); |
| } else { |
| charger->is_charging = true; |
| charger->charging_current_max = |
| charger->pdata->charging_current |
| [charger->cable_type].input_current_limit; |
| charger->charging_current = |
| charger->pdata->charging_current |
| [charger->cable_type].fast_charging_current; |
| /* decrease the charging current according to siop level */ |
| set_charging_current = |
| charger->charging_current * charger->siop_level / 100; |
| if (set_charging_current > 0 && |
| set_charging_current < usb_charging_current) |
| set_charging_current = usb_charging_current; |
| |
| set_charging_current_max = |
| charger->charging_current_max; |
| #ifdef WPC_CHECK_CVPRM_FEATURE |
| if (val->intval == POWER_SUPPLY_TYPE_WIRELESS) |
| max77804_check_cvprm(charger, 0x1C); |
| else |
| max77804_check_cvprm(charger, 0x1D); |
| #endif |
| |
| if (charger->siop_level < 100) { |
| if (val->intval == POWER_SUPPLY_TYPE_WIRELESS) { |
| if (set_charging_current_max > SIOP_WIRELESS_INPUT_LIMIT_CURRENT) { |
| set_charging_current_max = SIOP_WIRELESS_INPUT_LIMIT_CURRENT; |
| if (set_charging_current > SIOP_WIRELESS_CHARGING_LIMIT_CURRENT) |
| set_charging_current = SIOP_WIRELESS_CHARGING_LIMIT_CURRENT; |
| } |
| } else { |
| if (set_charging_current_max > SIOP_INPUT_LIMIT_CURRENT) { |
| set_charging_current_max = SIOP_INPUT_LIMIT_CURRENT; |
| if (set_charging_current > SIOP_CHARGING_LIMIT_CURRENT) |
| set_charging_current = SIOP_CHARGING_LIMIT_CURRENT; |
| } |
| } |
| } |
| } |
| max77804_set_charger_state(charger, charger->is_charging); |
| /* if battery full, only disable charging */ |
| if ((charger->status == POWER_SUPPLY_STATUS_CHARGING) || |
| (charger->status == POWER_SUPPLY_STATUS_DISCHARGING) || |
| (charger->status == POWER_SUPPLY_STATUS_FULL) || |
| (value.intval == POWER_SUPPLY_HEALTH_UNSPEC_FAILURE) || |
| (value.intval == POWER_SUPPLY_HEALTH_OVERHEATLIMIT)) { |
| /* current setting */ |
| max77804_set_charge_current(charger, |
| set_charging_current); |
| /* if battery is removed, disable input current and reenable input current |
| * to enable buck always */ |
| if ((value.intval == POWER_SUPPLY_HEALTH_UNSPEC_FAILURE) || |
| (value.intval == POWER_SUPPLY_HEALTH_OVERHEATLIMIT)) |
| max77804_set_input_current(charger, 0); |
| else |
| max77804_set_input_current(charger, |
| set_charging_current_max); |
| max77804_set_topoff_current(charger, |
| charger->pdata->charging_current[ |
| val->intval].full_check_current_1st, |
| charger->pdata->charging_current[ |
| val->intval].full_check_current_2nd); |
| } |
| break; |
| /* val->intval : input charging current */ |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| charger->charging_current_max = val->intval; |
| break; |
| /* val->intval : charging current */ |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| charger->charging_current = val->intval; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| max77804_set_charge_current(charger, |
| val->intval); |
| max77804_set_input_current(charger, |
| val->intval); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| charger->siop_level = val->intval; |
| if (charger->is_charging) { |
| /* decrease the charging current according to siop level */ |
| int current_now = |
| charger->charging_current * val->intval / 100; |
| |
| /* do forced set charging current */ |
| if (current_now > 0 && |
| current_now < usb_charging_current) |
| current_now = usb_charging_current; |
| |
| if (charger->cable_type == POWER_SUPPLY_TYPE_MAINS) { |
| if (charger->siop_level < 100 ) { |
| set_charging_current_max = SIOP_INPUT_LIMIT_CURRENT; |
| } else { |
| set_charging_current_max = |
| charger->charging_current_max; |
| } |
| |
| if (charger->siop_level < 100 && |
| current_now > SIOP_CHARGING_LIMIT_CURRENT) |
| current_now = SIOP_CHARGING_LIMIT_CURRENT; |
| max77804_set_input_current(charger, |
| set_charging_current_max); |
| } else if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) { |
| if (charger->siop_level < 100 ) { |
| set_charging_current_max = SIOP_WIRELESS_INPUT_LIMIT_CURRENT; |
| } else { |
| set_charging_current_max = |
| charger->charging_current_max; |
| } |
| |
| if (charger->siop_level < 100 && |
| current_now > SIOP_WIRELESS_CHARGING_LIMIT_CURRENT) |
| current_now = SIOP_WIRELESS_CHARGING_LIMIT_CURRENT; |
| max77804_set_input_current(charger, |
| set_charging_current_max); |
| } |
| |
| max77804_set_charge_current(charger, current_now); |
| |
| } |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL: |
| if (val->intval) { |
| chg_cnfg_00 &= ~(CHG_CNFG_00_CHG_MASK |
| | CHG_CNFG_00_BUCK_MASK); |
| chg_cnfg_00 |= (CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); |
| max77804_update_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, |
| chg_cnfg_00, |
| (CHG_CNFG_00_CHG_MASK |
| | CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BUCK_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK)); |
| } else { |
| chg_cnfg_00 = ~(CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); |
| chg_cnfg_00 |= CHG_CNFG_00_BUCK_MASK; |
| max77804_update_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, |
| chg_cnfg_00, |
| (CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BUCK_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK)); |
| } |
| break; |
| #if defined(CONFIG_SAMSUNG_BATTERY_ENG_TEST) |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| { |
| u8 ctrl3, cnfg12; |
| if(val->intval == POWER_SUPPLY_TYPE_WIRELESS) { |
| cnfg12 = (0 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| ctrl3 = (1 << CTRL3_JIGSET_SHIFT); |
| if (charger->cable_type == POWER_SUPPLY_TYPE_WIRELESS) { |
| charger->charging_current_max = 650; |
| charger->charging_current = 750; |
| max77804_set_input_current(charger, |
| charger->charging_current_max); |
| max77804_set_charge_current(charger, charger->charging_current); |
| } |
| } |
| else { |
| cnfg12 = (1 << CHG_CNFG_12_CHGINSEL_SHIFT); |
| ctrl3 = (0 << CTRL3_JIGSET_SHIFT); |
| } |
| |
| max77804_update_reg(charger->max77804->muic, MAX77804_MUIC_REG_CTRL3, ctrl3, |
| CTRL3_JIGSET_MASK); |
| max77804_update_reg(charger->max77804->i2c, MAX77804_CHG_REG_CHG_CNFG_12, cnfg12, |
| CHG_CNFG_12_CHGINSEL_MASK); |
| |
| pr_info("%s: ctrl3 : (0x%02x)\n", __func__, ctrl3); |
| pr_info("%s: set CNFG_12: 0x%x\n", __func__, cnfg12); |
| break; |
| } |
| #endif |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static u8 max77804_get_float_voltage_data( |
| int float_voltage) |
| { |
| u8 data = 0x16; |
| |
| if (float_voltage >= 4400) |
| data = 0x1f; |
| else if (float_voltage >= 4375) |
| data = 0x1e; |
| else if (float_voltage >= 4350) |
| data = 0x1d; |
| else if (float_voltage >= 4340) |
| data = 0x1c; |
| else |
| data = (float_voltage - 3650) / 25; |
| return data; |
| } |
| |
| static void max77804_charger_initialize(struct max77804_charger_data *charger) |
| { |
| u8 reg_data; |
| pr_debug("%s\n", __func__); |
| |
| /* unmasked: CHGIN_I, WCIN_I, BATP_I, BYP_I */ |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, 0x9a); |
| |
| /* unlock charger setting protect */ |
| reg_data = (0x03 << 2); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_06, reg_data); |
| |
| /* |
| * fast charge timer disable |
| * restart threshold disable |
| * pre-qual charge enable(default) |
| */ |
| reg_data = (0x0 << 0) | (0x03 << 4); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_01, reg_data); |
| |
| /* |
| * charge current 466mA(default) |
| * otg current limit 900mA |
| */ |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, ®_data); |
| reg_data |= (1 << 7); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_02, reg_data); |
| |
| /* |
| * top off current 100mA |
| * top off timer 40min |
| */ |
| reg_data = (0x04 << 3); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_03, reg_data); |
| |
| /* |
| * cv voltage 4.2V or 4.35V |
| * MINVSYS 3.6V(default) |
| */ |
| reg_data = max77804_get_float_voltage_data(charger->pdata->chg_float_voltage); |
| max77804_update_reg(charger->max77804->i2c, MAX77804_CHG_REG_CHG_CNFG_04, |
| (reg_data << CHG_CNFG_04_CHG_CV_PRM_SHIFT), |
| CHG_CNFG_04_CHG_CV_PRM_MASK); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_04, ®_data); |
| pr_info("%s: battery cv voltage 0x%x\n", __func__, reg_data); |
| } |
| |
| static void sec_chg_isr_work(struct work_struct *work) |
| { |
| struct max77804_charger_data *charger = |
| container_of(work, struct max77804_charger_data, isr_work.work); |
| |
| union power_supply_propval val; |
| |
| if (charger->pdata->full_check_type == |
| SEC_BATTERY_FULLCHARGED_CHGINT) { |
| |
| val.intval = max77804_get_charger_state(charger); |
| |
| switch (val.intval) { |
| case POWER_SUPPLY_STATUS_DISCHARGING: |
| pr_err("%s: Interrupted but Discharging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_NOT_CHARGING: |
| pr_err("%s: Interrupted but NOT Charging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_FULL: |
| pr_info("%s: Interrupted by Full\n", __func__); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_STATUS, val); |
| break; |
| |
| case POWER_SUPPLY_STATUS_CHARGING: |
| pr_err("%s: Interrupted but Charging\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_STATUS_UNKNOWN: |
| default: |
| pr_err("%s: Invalid Charger Status\n", __func__); |
| break; |
| } |
| } |
| |
| if (charger->pdata->ovp_uvlo_check_type == |
| SEC_BATTERY_OVP_UVLO_CHGINT) { |
| |
| val.intval = max77804_get_health_state(charger); |
| |
| switch (val.intval) { |
| case POWER_SUPPLY_HEALTH_OVERHEAT: |
| case POWER_SUPPLY_HEALTH_COLD: |
| pr_err("%s: Interrupted but Hot/Cold\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_DEAD: |
| pr_err("%s: Interrupted but Dead\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_OVERVOLTAGE: |
| case POWER_SUPPLY_HEALTH_UNDERVOLTAGE: |
| pr_info("%s: Interrupted by OVP/UVLO\n", __func__); |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, val); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: |
| pr_err("%s: Interrupted but Unspec\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_GOOD: |
| pr_err("%s: Interrupted but Good\n", __func__); |
| break; |
| |
| case POWER_SUPPLY_HEALTH_UNKNOWN: |
| default: |
| pr_err("%s: Invalid Charger Health\n", __func__); |
| break; |
| } |
| } |
| } |
| |
| static irqreturn_t sec_chg_irq_thread(int irq, void *irq_data) |
| { |
| struct max77804_charger_data *charger = irq_data; |
| |
| pr_info("%s: Charger interrupt occured\n", __func__); |
| |
| if ((charger->pdata->full_check_type == |
| SEC_BATTERY_FULLCHARGED_CHGINT) || |
| (charger->pdata->ovp_uvlo_check_type == |
| SEC_BATTERY_OVP_UVLO_CHGINT)) |
| schedule_delayed_work(&charger->isr_work, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void wpc_detect_work(struct work_struct *work) |
| { |
| struct max77804_charger_data *chg_data = container_of(work, |
| struct max77804_charger_data, |
| wpc_work.work); |
| int wc_w_state; |
| int retry_cnt; |
| union power_supply_propval value; |
| u8 reg_data; |
| pr_debug("%s\n", __func__); |
| |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data &= ~(1 << 5); |
| max77804_write_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| |
| /* check and unlock */ |
| check_charger_unlock_state(chg_data); |
| |
| retry_cnt = 0; |
| do { |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_OK, ®_data); |
| wc_w_state = (reg_data & MAX77804_WCIN_OK) |
| >> MAX77804_WCIN_OK_SHIFT; |
| msleep(50); |
| } while((retry_cnt++ < 2) && (wc_w_state == 0)); |
| |
| if ((chg_data->wc_w_state == 0) && (wc_w_state == 1)) { |
| value.intval = 1; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| pr_info("%s: wpc activated, set V_INT as PN\n", |
| __func__); |
| } else if ((chg_data->wc_w_state == 1) && (wc_w_state == 0)) { |
| if (!chg_data->is_charging) |
| max77804_set_charger_state(chg_data, true); |
| |
| retry_cnt = 0; |
| do { |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, ®_data); |
| reg_data = ((reg_data & MAX77804_CHG_DTLS) |
| >> MAX77804_CHG_DTLS_SHIFT); |
| msleep(50); |
| } while((retry_cnt++ < 2) && (reg_data == 0x8)); |
| pr_info("%s: reg_data: 0x%x, charging: %d\n", __func__, |
| reg_data, chg_data->is_charging); |
| if (!chg_data->is_charging) |
| max77804_set_charger_state(chg_data, false); |
| if ((reg_data != 0x08) |
| && (chg_data->cable_type == POWER_SUPPLY_TYPE_WIRELESS)) { |
| pr_info("%s: wpc uvlo, but charging\n", __func__); |
| queue_delayed_work(chg_data->wqueue, &chg_data->wpc_work, |
| msecs_to_jiffies(500)); |
| return; |
| } else { |
| value.intval = 0; |
| psy_do_property("wireless", set, |
| POWER_SUPPLY_PROP_ONLINE, value); |
| pr_info("%s: wpc deactivated, set V_INT as PD\n", |
| __func__); |
| } |
| } |
| pr_info("%s: w(%d to %d)\n", __func__, |
| chg_data->wc_w_state, wc_w_state); |
| |
| chg_data->wc_w_state = wc_w_state; |
| |
| wake_unlock(&chg_data->wpc_wake_lock); |
| } |
| |
| static irqreturn_t wpc_charger_irq(int irq, void *data) |
| { |
| struct max77804_charger_data *chg_data = data; |
| unsigned long delay; |
| u8 reg_data; |
| |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data |= (1 << 5); |
| max77804_write_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| |
| wake_lock(&chg_data->wpc_wake_lock); |
| #ifdef CONFIG_SAMSUNG_BATTERY_FACTORY |
| delay = msecs_to_jiffies(0); |
| #else |
| if (chg_data->wc_w_state) |
| delay = msecs_to_jiffies(500); |
| else |
| delay = msecs_to_jiffies(0); |
| #endif |
| queue_delayed_work(chg_data->wqueue, &chg_data->wpc_work, |
| delay); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77804_batp_irq(int irq, void *data) |
| { |
| struct max77804_charger_data *chg_data = data; |
| u8 batp_ok, bat_dtls; |
| union power_supply_propval value; |
| |
| pr_info("%s: battery present interrupt occured\n", __func__); |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_OK, &batp_ok); |
| |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_00, &bat_dtls); |
| pr_info("%s : CHG_INT_OK : 0x%x, CHG_DTLS_00: 0x%x\n", |
| __func__, batp_ok, bat_dtls); |
| |
| batp_ok &= 0x4; |
| bat_dtls &= 0x1; |
| |
| if (batp_ok == 0x0 || bat_dtls == 0x1) |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_PRESENT, value); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max77804_bypass_irq(int irq, void *data) |
| { |
| struct max77804_charger_data *chg_data = data; |
| u8 dtls_02; |
| u8 byp_dtls; |
| u8 chg_cnfg_00; |
| u8 vbus_state; |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| struct otg_notify *o_notify; |
| |
| o_notify = get_otg_notify(); |
| #endif |
| |
| pr_info("%s: irq(%d)\n", __func__, irq); |
| |
| /* check and unlock */ |
| check_charger_unlock_state(chg_data); |
| |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_02, |
| &dtls_02); |
| |
| byp_dtls = ((dtls_02 & MAX77804_BYP_DTLS) >> |
| MAX77804_BYP_DTLS_SHIFT); |
| pr_info("%s: BYP_DTLS(0x%02x)\n", __func__, byp_dtls); |
| vbus_state = max77804_get_vbus_state(chg_data); |
| |
| if (byp_dtls & 0x1) { |
| pr_info("%s: bypass overcurrent limit\n", __func__); |
| #ifdef CONFIG_USB_HOST_NOTIFY |
| send_otg_notify(o_notify, NOTIFY_EVENT_OVERCURRENT, 0); |
| #endif |
| /* disable the register values just related to OTG and |
| keep the values about the charging */ |
| max77804_read_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, &chg_cnfg_00); |
| chg_cnfg_00 &= ~(CHG_CNFG_00_OTG_MASK |
| | CHG_CNFG_00_BOOST_MASK |
| | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); |
| max77804_write_reg(chg_data->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, |
| chg_cnfg_00); |
| } |
| if (byp_dtls & 0x8) { |
| reduce_input_current(chg_data, REDUCE_CURRENT_STEP); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void max77804_chgin_isr_work(struct work_struct *work) |
| { |
| struct max77804_charger_data *charger = container_of(work, |
| struct max77804_charger_data, chgin_work); |
| u8 chgin_dtls, chg_dtls, chg_cnfg_00, reg_data; |
| u8 prev_chgin_dtls = 0xff; |
| int battery_health; |
| union power_supply_propval value; |
| int stable_count = 0; |
| |
| wake_lock(&charger->chgin_wake_lock); |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data |= (1 << 6); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| |
| while (1) { |
| psy_do_property("battery", get, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| battery_health = value.intval; |
| |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_00, |
| &chgin_dtls); |
| chgin_dtls = ((chgin_dtls & MAX77804_CHGIN_DTLS) >> |
| MAX77804_CHGIN_DTLS_SHIFT); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_DTLS_01, &chg_dtls); |
| chg_dtls = ((chg_dtls & MAX77804_CHG_DTLS) >> |
| MAX77804_CHG_DTLS_SHIFT); |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, &chg_cnfg_00); |
| |
| if (prev_chgin_dtls == chgin_dtls) |
| stable_count++; |
| else |
| stable_count = 0; |
| if (stable_count > 10) { |
| pr_info("%s: irq(%d), chgin(0x%x), chg_dtls(0x%x) prev 0x%x\n", |
| __func__, charger->irq_chgin, |
| chgin_dtls, chg_dtls, prev_chgin_dtls); |
| if (charger->is_charging) { |
| if ((chgin_dtls == 0x02) && \ |
| (battery_health != POWER_SUPPLY_HEALTH_OVERVOLTAGE)) { |
| pr_info("%s: charger is over voltage\n", |
| __func__); |
| value.intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if (((chgin_dtls == 0x0) || (chgin_dtls == 0x01)) &&(chg_dtls & 0x08) && \ |
| (chg_cnfg_00 & MAX77804_MODE_BUCK) && \ |
| (chg_cnfg_00 & MAX77804_MODE_CHGR) && \ |
| (battery_health != POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && \ |
| (charger->cable_type != POWER_SUPPLY_TYPE_WIRELESS)) { |
| pr_info("%s, vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: vBus is undervoltage\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_UNDERVOLTAGE; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if ((battery_health == \ |
| POWER_SUPPLY_HEALTH_OVERVOLTAGE) && |
| (chgin_dtls != 0x02)) { |
| pr_info("%s: vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: overvoltage->normal\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_GOOD; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| } else if ((battery_health == \ |
| POWER_SUPPLY_HEALTH_UNDERVOLTAGE) && |
| !((chgin_dtls == 0x0) || (chgin_dtls == 0x01))){ |
| pr_info("%s: vbus_state : 0x%d, chg_state : 0x%d\n", __func__, chgin_dtls, chg_dtls); |
| pr_info("%s: undervoltage->normal\n", __func__); |
| value.intval = POWER_SUPPLY_HEALTH_GOOD; |
| psy_do_property("battery", set, |
| POWER_SUPPLY_PROP_HEALTH, value); |
| max77804_set_input_current(charger, |
| charger->charging_current_max); |
| } |
| } |
| break; |
| } |
| |
| if (charger->is_charging) { |
| /* reduce only at CC MODE */ |
| if (((chgin_dtls == 0x0) || (chgin_dtls == 0x01)) && |
| (chg_dtls == 0x01) && (stable_count > 2)) |
| reduce_input_current(charger, REDUCE_CURRENT_STEP); |
| } |
| prev_chgin_dtls = chgin_dtls; |
| msleep(100); |
| } |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, ®_data); |
| reg_data &= ~(1 << 6); |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_MASK, reg_data); |
| |
| wake_unlock(&charger->chgin_wake_lock); |
| } |
| |
| static irqreturn_t max77804_chgin_irq(int irq, void *data) |
| { |
| struct max77804_charger_data *charger = data; |
| queue_work(charger->wqueue, &charger->chgin_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* register chgin isr after sec_battery_probe */ |
| static void max77804_chgin_init_work(struct work_struct *work) |
| { |
| struct max77804_charger_data *charger = container_of(work, |
| struct max77804_charger_data, |
| chgin_init_work.work); |
| int ret; |
| |
| pr_info("%s \n", __func__); |
| ret = request_threaded_irq(charger->irq_chgin, NULL, |
| max77804_chgin_irq, 0, "chgin-irq", charger); |
| if (ret < 0) { |
| pr_err("%s: fail to request chgin IRQ: %d: %d\n", |
| __func__, charger->irq_chgin, ret); |
| } |
| } |
| |
| #ifdef CONFIG_OF |
| static int sec_charger_parse_dt(struct max77804_charger_data *charger) |
| { |
| struct device_node *np = of_find_node_by_name(NULL, "charger"); |
| sec_battery_platform_data_t *pdata = charger->pdata; |
| int ret = 0; |
| int i, len; |
| const u32 *p; |
| |
| if (np == NULL) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| ret = of_property_read_u32(np, "battery,chg_float_voltage", |
| &pdata->chg_float_voltage); |
| } |
| |
| np = of_find_node_by_name(NULL, "battery"); |
| if (!np) { |
| pr_err("%s np NULL\n", __func__); |
| } else { |
| p = of_get_property(np, "battery,input_current_limit", &len); |
| |
| len = len / sizeof(u32); |
| |
| pdata->charging_current = kzalloc(sizeof(sec_charging_current_t) * len, |
| GFP_KERNEL); |
| |
| for(i = 0; i < len; i++) { |
| ret = of_property_read_u32_index(np, |
| "battery,input_current_limit", i, |
| &pdata->charging_current[i].input_current_limit); |
| ret = of_property_read_u32_index(np, |
| "battery,fast_charging_current", i, |
| &pdata->charging_current[i].fast_charging_current); |
| ret = of_property_read_u32_index(np, |
| "battery,full_check_current_1st", i, |
| &pdata->charging_current[i].full_check_current_1st); |
| ret = of_property_read_u32_index(np, |
| "battery,full_check_current_2nd", i, |
| &pdata->charging_current[i].full_check_current_2nd); |
| } |
| } |
| return ret; |
| } |
| #endif |
| |
| static __devinit int max77804_charger_probe(struct platform_device *pdev) |
| { |
| struct max77804_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct max77804_platform_data *pdata = dev_get_platdata(iodev->dev); |
| struct max77804_charger_data *charger; |
| int ret = 0; |
| u8 reg_data; |
| |
| pr_info("%s: MAX77804 Charger driver probe\n", __func__); |
| |
| charger = kzalloc(sizeof(*charger), GFP_KERNEL); |
| if (!charger) |
| return -ENOMEM; |
| |
| pdata->charger_data = kzalloc(sizeof(sec_battery_platform_data_t), GFP_KERNEL); |
| if (!pdata->charger_data) { |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| |
| charger->max77804 = iodev; |
| charger->pdata = pdata->charger_data; |
| charger->aicl_on = false; |
| charger->siop_level = 100; |
| |
| #ifdef CONFIG_OF |
| if (sec_charger_parse_dt(charger)) |
| dev_err(&pdev->dev, |
| "%s : Failed to get charger int\n", __func__); |
| #endif |
| |
| platform_set_drvdata(pdev, charger); |
| |
| charger->psy_chg.name = "sec-charger"; |
| charger->psy_chg.type = POWER_SUPPLY_TYPE_UNKNOWN; |
| charger->psy_chg.get_property = sec_chg_get_property; |
| charger->psy_chg.set_property = sec_chg_set_property; |
| charger->psy_chg.properties = sec_charger_props; |
| charger->psy_chg.num_properties = ARRAY_SIZE(sec_charger_props); |
| |
| mutex_init(&charger->ops_lock); |
| /* |
| if (charger->pdata->chg_gpio_init) { |
| if (!charger->pdata->chg_gpio_init()) { |
| pr_err("%s: Failed to Initialize GPIO\n", __func__); |
| goto err_free; |
| } |
| } |
| */ |
| max77804_charger_initialize(charger); |
| |
| if (max77804_read_reg(charger->max77804->i2c, MAX77804_PMIC_REG_PMIC_ID1, ®_data) < 0) { |
| pr_err("device not found on this channel (this is not an error)\n"); |
| ret = -ENODEV; |
| goto err_free; |
| } else { |
| charger->pmic_ver = (reg_data & 0xf); |
| pr_info("%s: device found: ver.0x%x\n", __func__, |
| charger->pmic_ver); |
| } |
| |
| charger->input_curr_limit_step = 25; |
| charger->wpc_input_curr_limit_step = 20; |
| charger->charging_curr_step= 400; // 0.1mA unit |
| |
| charger->wqueue = |
| create_singlethread_workqueue(dev_name(&pdev->dev)); |
| if (!charger->wqueue) { |
| pr_err("%s: Fail to Create Workqueue\n", __func__); |
| goto err_free; |
| } |
| wake_lock_init(&charger->chgin_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger->chgin"); |
| INIT_WORK(&charger->chgin_work, max77804_chgin_isr_work); |
| INIT_DELAYED_WORK(&charger->chgin_init_work, max77804_chgin_init_work); |
| wake_lock_init(&charger->recovery_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger-recovery"); |
| INIT_DELAYED_WORK(&charger->recovery_work, max77804_recovery_work); |
| wake_lock_init(&charger->wpc_wake_lock, WAKE_LOCK_SUSPEND, |
| "charger-wpc"); |
| INIT_DELAYED_WORK(&charger->wpc_work, wpc_detect_work); |
| ret = power_supply_register(&pdev->dev, &charger->psy_chg); |
| if (ret) { |
| pr_err("%s: Failed to Register psy_chg\n", __func__); |
| goto err_power_supply_register; |
| } |
| |
| if (charger->pdata->chg_irq) { |
| INIT_DELAYED_WORK( |
| &charger->isr_work, sec_chg_isr_work); |
| ret = request_threaded_irq(charger->pdata->chg_irq, |
| NULL, sec_chg_irq_thread, |
| charger->pdata->chg_irq_attr, |
| "charger-irq", charger); |
| if (ret) { |
| pr_err("%s: Failed to Reqeust IRQ\n", __func__); |
| goto err_irq; |
| } |
| } |
| |
| charger->wc_w_irq = pdata->irq_base + MAX77804_CHG_IRQ_WCIN_I; |
| ret = request_threaded_irq(charger->wc_w_irq, |
| NULL, wpc_charger_irq, |
| IRQF_TRIGGER_FALLING, |
| "wpc-int", charger); |
| if (ret) { |
| pr_err("%s: Failed to Reqeust IRQ\n", __func__); |
| goto err_wc_irq; |
| } |
| max77804_read_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_INT_OK, ®_data); |
| charger->wc_w_state = (reg_data & MAX77804_WCIN_OK) |
| >> MAX77804_WCIN_OK_SHIFT; |
| |
| charger->irq_chgin = pdata->irq_base + MAX77804_CHG_IRQ_CHGIN_I; |
| /* enable chgin irq after sec_battery_probe */ |
| queue_delayed_work(charger->wqueue, &charger->chgin_init_work, |
| msecs_to_jiffies(3000)); |
| |
| charger->irq_bypass = pdata->irq_base + MAX77804_CHG_IRQ_BYP_I; |
| ret = request_threaded_irq(charger->irq_bypass, NULL, |
| max77804_bypass_irq, 0, "bypass-irq", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request bypass IRQ: %d: %d\n", |
| __func__, charger->irq_bypass, ret); |
| |
| charger->irq_batp = pdata->irq_base + MAX77804_CHG_IRQ_BATP_I; |
| ret = request_threaded_irq(charger->irq_batp, NULL, |
| max77804_batp_irq, 0, "batp_irq", charger); |
| if (ret < 0) |
| pr_err("%s: fail to request batp irq : %d, %d\n", |
| __func__, charger->irq_batp, ret); |
| |
| return 0; |
| err_wc_irq: |
| free_irq(charger->pdata->chg_irq, NULL); |
| err_irq: |
| power_supply_unregister(&charger->psy_chg); |
| err_power_supply_register: |
| destroy_workqueue(charger->wqueue); |
| err_free: |
| kfree(charger); |
| |
| return ret; |
| |
| } |
| |
| static int __devexit max77804_charger_remove(struct platform_device *pdev) |
| { |
| struct max77804_charger_data *charger = |
| platform_get_drvdata(pdev); |
| |
| destroy_workqueue(charger->wqueue); |
| free_irq(charger->wc_w_irq, NULL); |
| free_irq(charger->pdata->chg_irq, NULL); |
| power_supply_unregister(&charger->psy_chg); |
| kfree(charger); |
| |
| return 0; |
| } |
| |
| #if defined CONFIG_PM |
| static int max77804_charger_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int max77804_charger_resume(struct device *dev) |
| { |
| return 0; |
| } |
| #else |
| #define max77804_charger_suspend NULL |
| #define max77804_charger_resume NULL |
| #endif |
| |
| static void max77804_charger_shutdown(struct device *dev) |
| { |
| struct max77804_charger_data *charger = |
| dev_get_drvdata(dev); |
| u8 reg_data; |
| |
| pr_info("%s: MAX77804 Charger driver shutdown\n", __func__); |
| if (!charger->max77804->i2c) { |
| pr_err("%s: no max77804 i2c client\n", __func__); |
| return; |
| } |
| reg_data = 0x04; |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_00, reg_data); |
| |
| reg_data = 0x19; |
| |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_09, reg_data); |
| reg_data = 0x19; |
| max77804_write_reg(charger->max77804->i2c, |
| MAX77804_CHG_REG_CHG_CNFG_10, reg_data); |
| pr_info("func:%s \n", __func__); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(max77804_charger_pm_ops, max77804_charger_suspend, |
| max77804_charger_resume); |
| |
| static struct platform_driver max77804_charger_driver = { |
| .driver = { |
| .name = "max77804-charger", |
| .owner = THIS_MODULE, |
| .pm = &max77804_charger_pm_ops, |
| .shutdown = max77804_charger_shutdown, |
| }, |
| .probe = max77804_charger_probe, |
| .remove = __devexit_p(max77804_charger_remove), |
| }; |
| |
| static int __init max77804_charger_init(void) |
| { |
| pr_info("func:%s\n", __func__); |
| return platform_driver_register(&max77804_charger_driver); |
| } |
| module_init(max77804_charger_init); |
| |
| static void __exit max77804_charger_exit(void) |
| { |
| platform_driver_register(&max77804_charger_driver); |
| } |
| |
| module_exit(max77804_charger_exit); |
| |
| MODULE_DESCRIPTION("max77804 charger driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |