diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 776ac80..c574ae2 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -46,8 +46,6 @@
 						 * 6144 stereo */
 #define DAC33_BUFFER_SIZE_SAMPLES	6144
 
-#define NSAMPLE_MAX		5700
-
 #define MODE7_LTHR		10
 #define MODE7_UTHR		(DAC33_BUFFER_SIZE_SAMPLES - 10)
 
@@ -99,16 +97,10 @@
 	unsigned int refclk;
 
 	unsigned int alarm_threshold;	/* set to be half of LATENCY_TIME_MS */
-	unsigned int nsample_min;	/* nsample should not be lower than
-					 * this */
-	unsigned int nsample_max;	/* nsample should not be higher than
-					 * this */
 	enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
 	unsigned int nsample;		/* burst read amount from host */
 	int mode1_latency;		/* latency caused by the i2c writes in
 					 * us */
-	int auto_fifo_config; 		/* Configure the FIFO based on the
-					 * period size */
 	u8 burst_bclkdiv;		/* BCLK divider value in burst mode */
 	unsigned int burst_rate;	/* Interface speed in Burst modes */
 
@@ -436,73 +428,6 @@
 	return 0;
 }
 
-static int dac33_get_nsample(struct snd_kcontrol *kcontrol,
-			 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
-
-	ucontrol->value.integer.value[0] = dac33->nsample;
-
-	return 0;
-}
-
-static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
-			 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
-	int ret = 0;
-
-	if (dac33->nsample == ucontrol->value.integer.value[0])
-		return 0;
-
-	if (ucontrol->value.integer.value[0] < dac33->nsample_min ||
-	    ucontrol->value.integer.value[0] > dac33->nsample_max) {
-		ret = -EINVAL;
-	} else {
-		dac33->nsample = ucontrol->value.integer.value[0];
-		/* Re calculate the burst time */
-		dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
-						      dac33->nsample);
-	}
-
-	return ret;
-}
-
-static int dac33_get_uthr(struct snd_kcontrol *kcontrol,
-			 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
-
-	ucontrol->value.integer.value[0] = dac33->uthr;
-
-	return 0;
-}
-
-static int dac33_set_uthr(struct snd_kcontrol *kcontrol,
-			 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
-	int ret = 0;
-
-	if (dac33->substream)
-		return -EBUSY;
-
-	if (dac33->uthr == ucontrol->value.integer.value[0])
-		return 0;
-
-	if (ucontrol->value.integer.value[0] < (MODE7_LTHR + 10) ||
-	    ucontrol->value.integer.value[0] > MODE7_UTHR)
-		ret = -EINVAL;
-	else
-		dac33->uthr = ucontrol->value.integer.value[0];
-
-	return ret;
-}
-
 static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
 			 struct snd_ctl_elem_value *ucontrol)
 {
@@ -587,13 +512,6 @@
 		 dac33_get_fifo_mode, dac33_set_fifo_mode),
 };
 
-static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = {
-	SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
-		dac33_get_nsample, dac33_set_nsample),
-	SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0,
-		 dac33_get_uthr, dac33_set_uthr),
-};
-
 /* Analog bypass */
 static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
 	SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
@@ -853,10 +771,6 @@
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
 
 	dac33->substream = NULL;
-
-	/* Reset the nSample restrictions */
-	dac33->nsample_min = 0;
-	dac33->nsample_max = NSAMPLE_MAX;
 }
 
 static int dac33_hw_params(struct snd_pcm_substream *substream,
@@ -1112,39 +1026,19 @@
 		nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
 				dac33->alarm_threshold;
 
-		if (dac33->auto_fifo_config) {
-			if (period_size <= dac33->alarm_threshold)
-				/*
-				 * Configure nSamaple to number of periods,
-				 * which covers the latency requironment.
-				 */
-				dac33->nsample = period_size *
-				       ((dac33->alarm_threshold / period_size) +
-				       (dac33->alarm_threshold % period_size ?
-				       1 : 0));
-			else if (period_size > nsample_limit)
-				dac33->nsample = nsample_limit;
-			else
-				dac33->nsample = period_size;
-		} else {
-			/* nSample time shall not be shorter than i2c latency */
-			dac33->nsample_min = dac33->alarm_threshold;
+		if (period_size <= dac33->alarm_threshold)
 			/*
-			 * nSample should not be bigger than alsa buffer minus
-			 * size of one period to avoid overruns
+			 * Configure nSamaple to number of periods,
+			 * which covers the latency requironment.
 			 */
-			dac33->nsample_max = substream->runtime->buffer_size -
-						period_size;
-
-			if (dac33->nsample_max > nsample_limit)
-				dac33->nsample_max = nsample_limit;
-
-			/* Correct the nSample if it is outside of the ranges */
-			if (dac33->nsample < dac33->nsample_min)
-				dac33->nsample = dac33->nsample_min;
-			if (dac33->nsample > dac33->nsample_max)
-				dac33->nsample = dac33->nsample_max;
-		}
+			dac33->nsample = period_size *
+				((dac33->alarm_threshold / period_size) +
+				(dac33->alarm_threshold % period_size ?
+				1 : 0));
+		else if (period_size > nsample_limit)
+			dac33->nsample = nsample_limit;
+		else
+			dac33->nsample = period_size;
 
 		dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
 						      dac33->nsample);
@@ -1152,16 +1046,13 @@
 		dac33->t_stamp2 = 0;
 		break;
 	case DAC33_FIFO_MODE7:
-		if (dac33->auto_fifo_config) {
-			dac33->uthr = UTHR_FROM_PERIOD_SIZE(
-					period_size,
-					rate,
-					dac33->burst_rate) + 9;
-			if (dac33->uthr > MODE7_UTHR)
-				dac33->uthr = MODE7_UTHR;
-			if (dac33->uthr < (MODE7_LTHR + 10))
-				dac33->uthr = (MODE7_LTHR + 10);
-		}
+		dac33->uthr = UTHR_FROM_PERIOD_SIZE(period_size, rate,
+						    dac33->burst_rate) + 9;
+		if (dac33->uthr > MODE7_UTHR)
+			dac33->uthr = MODE7_UTHR;
+		if (dac33->uthr < (MODE7_LTHR + 10))
+			dac33->uthr = (MODE7_LTHR + 10);
+
 		dac33->mode7_us_to_lthr =
 				SAMPLES_TO_US(substream->runtime->rate,
 					dac33->uthr - MODE7_LTHR + 1);
@@ -1486,14 +1377,10 @@
 	snd_soc_add_controls(codec, dac33_snd_controls,
 			     ARRAY_SIZE(dac33_snd_controls));
 	/* Only add the FIFO controls, if we have valid IRQ number */
-	if (dac33->irq >= 0) {
+	if (dac33->irq >= 0)
 		snd_soc_add_controls(codec, dac33_mode_snd_controls,
 				     ARRAY_SIZE(dac33_mode_snd_controls));
-		/* FIFO usage controls only, if autoio config is not selected */
-		if (!dac33->auto_fifo_config)
-			snd_soc_add_controls(codec, dac33_fifo_snd_controls,
-					ARRAY_SIZE(dac33_fifo_snd_controls));
-	}
+
 	dac33_add_widgets(codec);
 
 err_power:
@@ -1593,14 +1480,10 @@
 	/* Pre calculate the burst rate */
 	dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32;
 	dac33->keep_bclk = pdata->keep_bclk;
-	dac33->auto_fifo_config = pdata->auto_fifo_config;
 	dac33->mode1_latency = pdata->mode1_latency;
 	if (!dac33->mode1_latency)
 		dac33->mode1_latency = 10000; /* 10ms */
 	dac33->irq = client->irq;
-	dac33->nsample = NSAMPLE_MAX;
-	dac33->nsample_max = NSAMPLE_MAX;
-	dac33->uthr = MODE7_UTHR;
 	/* Disable FIFO use by default */
 	dac33->fifo_mode = DAC33_FIFO_BYPASS;