/* radio-aztech.c - Aztech radio card driver for Linux 2.2
 *
 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
 * Adapted to support the Video for Linux API by
 * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
 *
 * Quay Ly
 * Donald Song
 * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
 * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
 * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
 *
 * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
 * along with more information on the card itself.
 *
 * History:
 * 1999-02-24	Russell Kroll <rkroll@exploits.org>
 *		Fine tuning/VIDEO_TUNER_LOW
 * 		Range expanded to 87-108 MHz (from 87.9-107.8)
 *
 * Notable changes from the original source:
 * - includes stripped down to the essentials
 * - for loops used as delays replaced with udelay()
 * - #defines removed, changed to static values
 * - tuning structure changed - no more character arrays, other changes
*/

#include <linux/module.h>	/* Modules 			*/
#include <linux/init.h>		/* Initdata			*/
#include <linux/ioport.h>	/* request_region		*/
#include <linux/delay.h>	/* udelay			*/
#include <asm/io.h>		/* outb, outb_p			*/
#include <asm/uaccess.h>	/* copy to/from user		*/
#include <linux/videodev2.h>	/* kernel radio structs		*/
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>

#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
#define RADIO_VERSION KERNEL_VERSION(0,0,2)

static struct v4l2_queryctrl radio_qctrl[] = {
	{
		.id            = V4L2_CID_AUDIO_MUTE,
		.name          = "Mute",
		.minimum       = 0,
		.maximum       = 1,
		.default_value = 1,
		.type          = V4L2_CTRL_TYPE_BOOLEAN,
	},{
		.id            = V4L2_CID_AUDIO_VOLUME,
		.name          = "Volume",
		.minimum       = 0,
		.maximum       = 0xff,
		.step          = 1,
		.default_value = 0xff,
		.type          = V4L2_CTRL_TYPE_INTEGER,
	}
};

/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */

#ifndef CONFIG_RADIO_AZTECH_PORT
#define CONFIG_RADIO_AZTECH_PORT -1
#endif

static int io = CONFIG_RADIO_AZTECH_PORT;
static int radio_nr = -1;
static int radio_wait_time = 1000;
static struct mutex lock;

struct az_device
{
	unsigned long in_use;
	int curvol;
	unsigned long curfreq;
	int stereo;
};

static int volconvert(int level)
{
	level>>=14;		/* Map 16bits down to 2 bit */
	level&=3;

	/* convert to card-friendly values */
	switch (level)
	{
		case 0:
			return 0;
		case 1:
			return 1;
		case 2:
			return 4;
		case 3:
			return 5;
	}
	return 0;	/* Quieten gcc */
}

static void send_0_byte (struct az_device *dev)
{
	udelay(radio_wait_time);
	outb_p(2+volconvert(dev->curvol), io);
	outb_p(64+2+volconvert(dev->curvol), io);
}

static void send_1_byte (struct az_device *dev)
{
	udelay (radio_wait_time);
	outb_p(128+2+volconvert(dev->curvol), io);
	outb_p(128+64+2+volconvert(dev->curvol), io);
}

static int az_setvol(struct az_device *dev, int vol)
{
	mutex_lock(&lock);
	outb (volconvert(vol), io);
	mutex_unlock(&lock);
	return 0;
}

/* thanks to Michael Dwyer for giving me a dose of clues in
 * the signal strength department..
 *
 * This card has a stereo bit - bit 0 set = mono, not set = stereo
 * It also has a "signal" bit - bit 1 set = bad signal, not set = good
 *
 */

static int az_getsigstr(struct az_device *dev)
{
	if (inb(io) & 2)	/* bit set = no signal present */
		return 0;
	return 1;		/* signal present */
}

static int az_getstereo(struct az_device *dev)
{
	if (inb(io) & 1) 	/* bit set = mono */
		return 0;
	return 1;		/* stereo */
}

static int az_setfreq(struct az_device *dev, unsigned long frequency)
{
	int  i;

	frequency += 171200;		/* Add 10.7 MHz IF		*/
	frequency /= 800;		/* Convert to 50 kHz units	*/

	mutex_lock(&lock);

	send_0_byte (dev);		/*  0: LSB of frequency       */

	for (i = 0; i < 13; i++)	/*   : frequency bits (1-13)  */
		if (frequency & (1 << i))
			send_1_byte (dev);
		else
			send_0_byte (dev);

	send_0_byte (dev);		/* 14: test bit - always 0    */
	send_0_byte (dev);		/* 15: test bit - always 0    */
	send_0_byte (dev);		/* 16: band data 0 - always 0 */
	if (dev->stereo)		/* 17: stereo (1 to enable)   */
		send_1_byte (dev);
	else
		send_0_byte (dev);

	send_1_byte (dev);		/* 18: band data 1 - unknown  */
	send_0_byte (dev);		/* 19: time base - always 0   */
	send_0_byte (dev);		/* 20: spacing (0 = 25 kHz)   */
	send_1_byte (dev);		/* 21: spacing (1 = 25 kHz)   */
	send_0_byte (dev);		/* 22: spacing (0 = 25 kHz)   */
	send_1_byte (dev);		/* 23: AM/FM (FM = 1, always) */

	/* latch frequency */

	udelay (radio_wait_time);
	outb_p(128+64+volconvert(dev->curvol), io);

	mutex_unlock(&lock);

	return 0;
}

static int vidioc_querycap (struct file *file, void  *priv,
					struct v4l2_capability *v)
{
	strlcpy(v->driver, "radio-aztech", sizeof (v->driver));
	strlcpy(v->card, "Aztech Radio", sizeof (v->card));
	sprintf(v->bus_info,"ISA");
	v->version = RADIO_VERSION;
	v->capabilities = V4L2_CAP_TUNER;
	return 0;
}

static int vidioc_g_tuner (struct file *file, void *priv,
				struct v4l2_tuner *v)
{
	struct az_device *az = video_drvdata(file);

	if (v->index > 0)
		return -EINVAL;

	strcpy(v->name, "FM");
	v->type = V4L2_TUNER_RADIO;

	v->rangelow=(87*16000);
	v->rangehigh=(108*16000);
	v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
	v->capability=V4L2_TUNER_CAP_LOW;
	if(az_getstereo(az))
		v->audmode = V4L2_TUNER_MODE_STEREO;
	else
		v->audmode = V4L2_TUNER_MODE_MONO;
	v->signal=0xFFFF*az_getsigstr(az);

	return 0;
}


static int vidioc_s_tuner (struct file *file, void *priv,
				struct v4l2_tuner *v)
{
	if (v->index > 0)
		return -EINVAL;

	return 0;
}

static int vidioc_g_audio (struct file *file, void *priv,
			   struct v4l2_audio *a)
{
	if (a->index > 1)
		return -EINVAL;

	strcpy(a->name, "Radio");
	a->capability = V4L2_AUDCAP_STEREO;
	return 0;
}

static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
	*i = 0;
	return 0;
}

static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
	if (i != 0)
		return -EINVAL;
	return 0;
}


static int vidioc_s_audio (struct file *file, void *priv,
			   struct v4l2_audio *a)
{
	if (a->index != 0)
		return -EINVAL;

	return 0;
}

static int vidioc_s_frequency (struct file *file, void *priv,
				struct v4l2_frequency *f)
{
	struct az_device *az = video_drvdata(file);

	az->curfreq = f->frequency;
	az_setfreq(az, az->curfreq);
	return 0;
}

static int vidioc_g_frequency (struct file *file, void *priv,
				struct v4l2_frequency *f)
{
	struct az_device *az = video_drvdata(file);

	f->type = V4L2_TUNER_RADIO;
	f->frequency = az->curfreq;

	return 0;
}

static int vidioc_queryctrl (struct file *file, void *priv,
			    struct v4l2_queryctrl *qc)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
		if (qc->id && qc->id == radio_qctrl[i].id) {
			memcpy(qc, &(radio_qctrl[i]),
						sizeof(*qc));
			return (0);
		}
	}
	return -EINVAL;
}

static int vidioc_g_ctrl (struct file *file, void *priv,
			    struct v4l2_control *ctrl)
{
	struct az_device *az = video_drvdata(file);

	switch (ctrl->id) {
		case V4L2_CID_AUDIO_MUTE:
			if (az->curvol==0)
				ctrl->value=1;
			else
				ctrl->value=0;
			return (0);
		case V4L2_CID_AUDIO_VOLUME:
			ctrl->value=az->curvol * 6554;
			return (0);
	}
	return -EINVAL;
}

static int vidioc_s_ctrl (struct file *file, void *priv,
			    struct v4l2_control *ctrl)
{
	struct az_device *az = video_drvdata(file);

	switch (ctrl->id) {
		case V4L2_CID_AUDIO_MUTE:
			if (ctrl->value) {
				az_setvol(az,0);
			} else {
				az_setvol(az,az->curvol);
			}
			return (0);
		case V4L2_CID_AUDIO_VOLUME:
			az_setvol(az,ctrl->value);
			return (0);
	}
	return -EINVAL;
}

static struct az_device aztech_unit;

static int aztech_exclusive_open(struct file *file)
{
	return test_and_set_bit(0, &aztech_unit.in_use) ? -EBUSY : 0;
}

static int aztech_exclusive_release(struct file *file)
{
	clear_bit(0, &aztech_unit.in_use);
	return 0;
}

static const struct v4l2_file_operations aztech_fops = {
	.owner		= THIS_MODULE,
	.open           = aztech_exclusive_open,
	.release        = aztech_exclusive_release,
	.ioctl		= video_ioctl2,
};

static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
	.vidioc_querycap    = vidioc_querycap,
	.vidioc_g_tuner     = vidioc_g_tuner,
	.vidioc_s_tuner     = vidioc_s_tuner,
	.vidioc_g_audio     = vidioc_g_audio,
	.vidioc_s_audio     = vidioc_s_audio,
	.vidioc_g_input     = vidioc_g_input,
	.vidioc_s_input     = vidioc_s_input,
	.vidioc_g_frequency = vidioc_g_frequency,
	.vidioc_s_frequency = vidioc_s_frequency,
	.vidioc_queryctrl   = vidioc_queryctrl,
	.vidioc_g_ctrl      = vidioc_g_ctrl,
	.vidioc_s_ctrl      = vidioc_s_ctrl,
};

static struct video_device aztech_radio = {
	.name		= "Aztech radio",
	.fops           = &aztech_fops,
	.ioctl_ops 	= &aztech_ioctl_ops,
	.release	= video_device_release_empty,
};

module_param_named(debug,aztech_radio.debug, int, 0644);
MODULE_PARM_DESC(debug,"activates debug info");

static int __init aztech_init(void)
{
	if(io==-1)
	{
		printk(KERN_ERR "You must set an I/O address with io=0x???\n");
		return -EINVAL;
	}

	if (!request_region(io, 2, "aztech"))
	{
		printk(KERN_ERR "aztech: port 0x%x already in use\n", io);
		return -EBUSY;
	}

	mutex_init(&lock);
	video_set_drvdata(&aztech_radio, &aztech_unit);

	if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
		release_region(io,2);
		return -EINVAL;
	}

	printk(KERN_INFO "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
	/* mute card - prevents noisy bootups */
	outb (0, io);
	return 0;
}

MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
MODULE_DESCRIPTION("A driver for the Aztech radio card.");
MODULE_LICENSE("GPL");

module_param(io, int, 0);
module_param(radio_nr, int, 0);
MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");

static void __exit aztech_cleanup(void)
{
	video_unregister_device(&aztech_radio);
	release_region(io,2);
}

module_init(aztech_init);
module_exit(aztech_cleanup);