microblaze: Add pci-bridge.h
Add pci-bridge.h for Microblaze. It is based on powerpc header file.
My changes:
I removed PPC_ prefix from constants
Removed ppc64 specifis parts
Signed-off-by: Michal Simek <monstr@monstr.eu>
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 7ad28f6..0c77cda 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -1 +1,196 @@
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+enum {
+ /* Force re-assigning all resources (ignore firmware
+ * setup completely)
+ */
+ PCI_REASSIGN_ALL_RSRC = 0x00000001,
+
+ /* Re-assign all bus numbers */
+ PCI_REASSIGN_ALL_BUS = 0x00000002,
+
+ /* Do not try to assign, just use existing setup */
+ PCI_PROBE_ONLY = 0x00000004,
+
+ /* Don't bother with ISA alignment unless the bridge has
+ * ISA forwarding enabled
+ */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
+
+ /* Enable domain numbers in /proc */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010,
+ /* ... except for domain 0 */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020,
+};
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ struct pci_bus *bus;
+ char is_dynamic;
+ struct device_node *dn;
+ struct list_head list_node;
+ struct device *parent;
+
+ int first_busno;
+ int last_busno;
+
+ int self_busno;
+
+ void __iomem *io_base_virt;
+ resource_size_t io_base_phys;
+
+ resource_size_t pci_io_size;
+
+ /* Some machines (PReP) have a non 1:1 mapping of
+ * the PCI memory space in the CPU bus space
+ */
+ resource_size_t pci_mem_offset;
+
+ /* Some machines have a special region to forward the ISA
+ * "memory" cycles such as VGA memory regions. Left to 0
+ * if unsupported
+ */
+ resource_size_t isa_mem_phys;
+ resource_size_t isa_mem_size;
+
+ struct pci_ops *ops;
+ unsigned int __iomem *cfg_addr;
+ void __iomem *cfg_data;
+
+ /*
+ * Used for variants of PCI indirect handling and possible quirks:
+ * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+ * EXT_REG - provides access to PCI-e extended registers
+ * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+ * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+ * to determine which bus number to match on when generating type0
+ * config cycles
+ * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+ * hanging if we don't have link and try to do config cycles to
+ * anything but the PHB. Only allow talking to the PHB if this is
+ * set.
+ * BIG_ENDIAN - cfg_addr is a big endian register
+ * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
+ * on the PLB4. Effectively disable MRM commands by setting this.
+ */
+#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
+#define INDIRECT_TYPE_EXT_REG 0x00000002
+#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
+#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
+#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
+#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
+ u32 indirect_type;
+
+ /* Currently, we limit ourselves to 1 IO range and 3 mem
+ * ranges since the common pci_bus structure can't handle more
+ */
+ struct resource io_resource;
+ struct resource mem_resources[3];
+ int global_number; /* PCI domain number */
+};
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+ return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+ /* No specific ISA handling on ppc32 at this stage, it
+ * all goes through PCI
+ */
+ return 0;
+}
+
+/* These are used for config access before all the PCI probing
+ has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+ int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller *hose,
+ resource_size_t cfg_addr,
+ resource_size_t cfg_data, u32 flags);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+ struct device_node *node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+ pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+ pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+ return pci_flags & flag;
+}
+
+extern struct list_head hose_list;
+
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
+
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */