Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
new file mode 100644
index 0000000..5e6a10f
--- /dev/null
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -0,0 +1,573 @@
+/*
+ * budget.c: driver for the SAA7146 based Budget DVB cards
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph Metzler
+ * & Marcus Metzler for convergence integrated media GmbH
+ *
+ * 26feb2004 Support for FS Activy Card (Grundig tuner) by
+ * Michael Dreher <michael@5dot1.de>,
+ * Oliver Endriss <o.endriss@gmx.de> and
+ * Andreas 'randy' Weinberger
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/dvb/
+ */
+
+#include "budget.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "ves1820.h"
+#include "l64781.h"
+#include "tda8083.h"
+
+static void Set22K (struct budget *budget, int state)
+{
+ struct saa7146_dev *dev=budget->dev;
+ dprintk(2, "budget: %p\n", budget);
+ saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
+}
+
+/* Diseqc functions only for TT Budget card */
+/* taken from the Skyvision DVB driver by
+ Ralph Metzler <rjkm@metzlerbros.de> */
+
+static void DiseqcSendBit (struct budget *budget, int data)
+{
+ struct saa7146_dev *dev=budget->dev;
+ dprintk(2, "budget: %p\n", budget);
+
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ udelay(data ? 500 : 1000);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ udelay(data ? 1000 : 500);
+}
+
+static void DiseqcSendByte (struct budget *budget, int data)
+{
+ int i, par=1, d;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ for (i=7; i>=0; i--) {
+ d = (data>>i)&1;
+ par ^= d;
+ DiseqcSendBit(budget, d);
+ }
+
+ DiseqcSendBit(budget, par);
+}
+
+static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
+{
+ struct saa7146_dev *dev=budget->dev;
+ int i;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ mdelay(16);
+
+ for (i=0; i<len; i++)
+ DiseqcSendByte(budget, msg[i]);
+
+ mdelay(16);
+
+ if (burst!=-1) {
+ if (burst)
+ DiseqcSendByte(budget, 0xff);
+ else {
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ udelay(12500);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+/*
+ * Routines for the Fujitsu Siemens Activy budget card
+ * 22 kHz tone and DiSEqC are handled by the frontend.
+ * Voltage must be set here.
+ */
+static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
+{
+ struct saa7146_dev *dev=budget->dev;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
+ break;
+ case SEC_VOLTAGE_18:
+ saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ return SetVoltage_Activy (budget, voltage);
+}
+
+static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ Set22K (budget, 1);
+ break;
+
+ case SEC_TONE_OFF:
+ Set22K (budget, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
+
+ return 0;
+}
+
+static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ SendDiSEqCMsg (budget, 0, NULL, minicmd);
+
+ return 0;
+}
+
+static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u8 pwr = 0;
+ u8 buf[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ u32 div = (params->frequency + 479500) / 125;
+
+ if (params->frequency > 2000000) pwr = 3;
+ else if (params->frequency > 1800000) pwr = 2;
+ else if (params->frequency > 1600000) pwr = 1;
+ else if (params->frequency > 1200000) pwr = 0;
+ else if (params->frequency >= 1100000) pwr = 1;
+ else pwr = 2;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = ((div & 0x18000) >> 10) | 0x95;
+ buf[3] = (pwr << 6) | 0x30;
+
+ // NOTE: since we're using a prescaler of 2, we set the
+ // divisor frequency to 62.5kHz and divide by 125 above
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct ves1x93_config alps_bsrv2_config =
+{
+ .demod_address = 0x08,
+ .xin = 90100000UL,
+ .invert_pwm = 0,
+ .pll_set = alps_bsrv2_pll_set,
+};
+
+static u8 alps_bsru6_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x52,
+ 0xff, 0xff
+};
+
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = 0xC4;
+
+ if (params->frequency > 1530000) data[3] = 0xc0;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct stv0299_config alps_bsru6_config = {
+
+ .demod_address = 0x68,
+ .inittab = alps_bsru6_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsru6_pll_set,
+};
+
+static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = (params->frequency + 35937500 + 31250) / 62500;
+
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x85 | ((div >> 10) & 0x60);
+ data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81);
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct ves1820_config alps_tdbe2_config = {
+ .demod_address = 0x09,
+ .xin = 57840000UL,
+ .invert = 1,
+ .selagc = VES1820_SELAGC_SIGNAMPERR,
+ .pll_set = alps_tdbe2_pll_set,
+};
+
+static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 cfg, cpump, band_select;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = (36125000 + params->frequency) / 166666;
+
+ cfg = 0x88;
+
+ if (params->frequency < 175000000) cpump = 2;
+ else if (params->frequency < 390000000) cpump = 1;
+ else if (params->frequency < 470000000) cpump = 2;
+ else if (params->frequency < 750000000) cpump = 1;
+ else cpump = 3;
+
+ if (params->frequency < 175000000) band_select = 0x0e;
+ else if (params->frequency < 470000000) band_select = 0x05;
+ else band_select = 0x03;
+
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = ((div >> 10) & 0x60) | cfg;
+ data[3] = (cpump << 6) | band_select;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct l64781_config grundig_29504_401_config = {
+ .demod_address = 0x55,
+ .pll_set = grundig_29504_401_pll_set,
+};
+
+static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = params->frequency / 125;
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x8e;
+ data[3] = 0x00;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct tda8083_config grundig_29504_451_config = {
+ .demod_address = 0x68,
+ .pll_set = grundig_29504_451_pll_set,
+};
+
+static u8 read_pwm(struct budget* budget)
+{
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
+ { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
+
+ if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static void frontend_init(struct budget *budget)
+{
+ switch(budget->dev->pci->subsystem_device) {
+ case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
+ case 0x1013:
+ // try the ALPS BSRV2 first of all
+ budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->set_tone = budget_set_tone;
+ break;
+ }
+
+ // try the ALPS BSRU6 now
+ budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->set_tone = budget_set_tone;
+ break;
+ }
+ break;
+
+ case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
+
+ budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
+ if (budget->dvb_frontend) break;
+ break;
+
+ case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
+
+ budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) break;
+ break;
+
+ case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059))
+ budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
+ break;
+ }
+ break;
+
+ case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
+ budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
+ break;
+ }
+ break;
+ }
+
+ if (budget->dvb_frontend == NULL) {
+ printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+ budget->dev->pci->vendor,
+ budget->dev->pci->device,
+ budget->dev->pci->subsystem_vendor,
+ budget->dev->pci->subsystem_device);
+ } else {
+ if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+ printk("budget: Frontend registration failed!\n");
+ if (budget->dvb_frontend->ops->release)
+ budget->dvb_frontend->ops->release(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ }
+ }
+}
+
+static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+ struct budget *budget = NULL;
+ int err;
+
+ budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
+ if( NULL == budget ) {
+ return -ENOMEM;
+ }
+
+ dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
+
+ dev->ext_priv = budget;
+
+ if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+ printk("==> failed\n");
+ kfree (budget);
+ return err;
+ }
+
+ budget->dvb_adapter->priv = budget;
+ frontend_init(budget);
+
+ return 0;
+}
+
+static int budget_detach (struct saa7146_dev* dev)
+{
+ struct budget *budget = (struct budget*) dev->ext_priv;
+ int err;
+
+ if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
+
+ err = ttpci_budget_deinit (budget);
+
+ kfree (budget);
+ dev->ext_priv = NULL;
+
+ return err;
+}
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
+MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
+
+static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
+ MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
+ MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
+ MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+ MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
+ MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
+ {
+ .vendor = 0,
+ }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+ .name = "budget dvb\0",
+ .flags = 0,
+
+ .module = THIS_MODULE,
+ .pci_tbl = pci_tbl,
+ .attach = budget_attach,
+ .detach = budget_detach,
+
+ .irq_mask = MASK_10,
+ .irq_func = ttpci_budget_irq10_handler,
+};
+
+static int __init budget_init(void)
+{
+ return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_exit(void)
+{
+ saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_init);
+module_exit(budget_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
+ "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");