PCI hotplug: pciehp: message refinement
This patch refines messages in pciehp module. The main changes are as
follows:
- remove the trailing "."
- remove __func__ as much as possible
- capitalize the first letter of messages
- show PCI device address including its domain
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 58c72d2..b643ca1 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -316,22 +316,19 @@
* proceed forward to issue the next command according
* to spec. Just print out the error message.
*/
- ctrl_dbg(ctrl,
- "%s: CMD_COMPLETED not clear after 1 sec.\n",
- __func__);
+ ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n");
} else if (!NO_CMD_CMPL(ctrl)) {
/*
* This controller semms to notify of command completed
* event even though it supports none of power
* controller, attention led, power led and EMI.
*/
- ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Need to "
- "wait for command completed event.\n",
- __func__);
+ ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to "
+ "wait for command completed event.\n");
ctrl->no_cmd_complete = 0;
} else {
- ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Maybe "
- "the controller is broken.\n", __func__);
+ ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe "
+ "the controller is broken.\n");
}
}
@@ -347,8 +344,7 @@
smp_mb();
retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
if (retval)
- ctrl_err(ctrl, "%s: Cannot write to SLOTCTRL register\n",
- __func__);
+ ctrl_err(ctrl, "Cannot write to SLOTCTRL register\n");
/*
* Wait for command completion.
@@ -418,15 +414,14 @@
retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
- __func__);
+ ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
return retval;
}
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) ||
!(lnk_status & NEG_LINK_WD)) {
- ctrl_err(ctrl, "%s : Link Training Error occurs \n", __func__);
+ ctrl_err(ctrl, "Link Training Error occurs \n");
retval = -1;
return retval;
}
@@ -551,7 +546,7 @@
retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- ctrl_err(ctrl, "%s: Cannot check for power fault\n", __func__);
+ ctrl_err(ctrl, "Cannot check for power fault\n");
return retval;
}
pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1);
@@ -567,7 +562,7 @@
retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- ctrl_err(ctrl, "%s : Cannot check EMI status\n", __func__);
+ ctrl_err(ctrl, "Cannot check EMI status\n");
return retval;
}
*status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT;
@@ -697,8 +692,7 @@
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
if (retval) {
- ctrl_err(ctrl, "%s: Write %x command failed!\n",
- __func__, slot_cmd);
+ ctrl_err(ctrl, "Write %x command failed!\n", slot_cmd);
return -1;
}
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
@@ -776,7 +770,7 @@
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
if (retval) {
- ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+ ctrl_err(ctrl, "Write command failed!\n");
retval = -1;
goto out;
}
@@ -1056,8 +1050,7 @@
PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
if (pcie_write_cmd(ctrl, cmd, mask)) {
- ctrl_err(ctrl, "%s: Cannot enable software notification\n",
- __func__);
+ ctrl_err(ctrl, "Cannot enable software notification\n");
return -1;
}
return 0;
@@ -1069,8 +1062,7 @@
mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
if (pcie_write_cmd(ctrl, 0, mask))
- ctrl_warn(ctrl, "%s: Cannot disable software notification\n",
- __func__);
+ ctrl_warn(ctrl, "Cannot disable software notification\n");
}
static int pcie_init_notification(struct controller *ctrl)
@@ -1179,7 +1171,7 @@
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
if (!ctrl) {
- dev_err(&dev->device, "%s : out of memory\n", __func__);
+ dev_err(&dev->device, "%s: Out of memory\n", __func__);
goto abort;
}
INIT_LIST_HEAD(&ctrl->slot_list);
@@ -1188,12 +1180,11 @@
ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
- ctrl_err(ctrl, "%s: Cannot find PCI Express capability\n",
- __func__);
+ ctrl_err(ctrl, "Cannot find PCI Express capability\n");
goto abort_ctrl;
}
if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) {
- ctrl_err(ctrl, "%s: Cannot read SLOTCAP register\n", __func__);
+ ctrl_err(ctrl, "Cannot read SLOTCAP register\n");
goto abort_ctrl;
}