Merge tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio fixes from Linus Walleij:
- a largeish fix for the IRQ handling in the new Zynq driver. The
quite verbose commit message gives the exact details.
- move some defines for gpiod flags outside an ifdef to make stub
functions work again.
- various minor fixes that we can accept for -rc1.
* tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio-lynxpoint: enable input sensing in resume
gpio: move GPIOD flags outside #ifdef
gpio: delete unneeded test before of_node_put
gpio: zynq: Fix IRQ handlers
gpiolib: devres: use correct structure type name in sizeof
MAINTAINERS: Change maintainer for gpio-bcm-kona.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c1c08a2..aacfc6a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2065,7 +2065,7 @@
F: drivers/scsi/bnx2i/
BROADCOM KONA GPIO DRIVER
-M: Markus Mayer <markus.mayer@linaro.org>
+M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
S: Supported
F: drivers/gpio/gpio-bcm-kona.c
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 41b2f40..954b9f6 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -90,7 +90,7 @@
struct gpio_desc **dr;
struct gpio_desc *desc;
- dr = devres_alloc(devm_gpiod_release, sizeof(struct gpiod_desc *),
+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
GFP_KERNEL);
if (!dr)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index ff9eb91..fa945ec 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -407,9 +407,27 @@
return 0;
}
+static int lp_gpio_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct lp_gpio *lg = platform_get_drvdata(pdev);
+ unsigned long reg;
+ int i;
+
+ /* on some hardware suspend clears input sensing, re-enable it here */
+ for (i = 0; i < lg->chip.ngpio; i++) {
+ if (gpiochip_is_requested(&lg->chip, i) != NULL) {
+ reg = lp_gpio_reg(&lg->chip, i, LP_CONFIG2);
+ outl(inl(reg) & ~GPINDIS_BIT, reg);
+ }
+ }
+ return 0;
+}
+
static const struct dev_pm_ops lp_gpio_pm_ops = {
.runtime_suspend = lp_gpio_runtime_suspend,
.runtime_resume = lp_gpio_runtime_resume,
+ .resume = lp_gpio_resume,
};
static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index c3145f9..31ad5df 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -95,6 +95,9 @@
struct clk *clk;
};
+static struct irq_chip zynq_gpio_level_irqchip;
+static struct irq_chip zynq_gpio_edge_irqchip;
+
/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
* for a given pin in the GPIO device
@@ -410,6 +413,15 @@
gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
writel_relaxed(int_any,
gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+ if (type & IRQ_TYPE_LEVEL_MASK) {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_level_irqchip, handle_fasteoi_irq, NULL);
+ } else {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_edge_irqchip, handle_level_irq, NULL);
+ }
+
return 0;
}
@@ -424,9 +436,21 @@
}
/* irq chip descriptor */
-static struct irq_chip zynq_gpio_irqchip = {
+static struct irq_chip zynq_gpio_level_irqchip = {
.name = DRIVER_NAME,
.irq_enable = zynq_gpio_irq_enable,
+ .irq_eoi = zynq_gpio_irq_ack,
+ .irq_mask = zynq_gpio_irq_mask,
+ .irq_unmask = zynq_gpio_irq_unmask,
+ .irq_set_type = zynq_gpio_set_irq_type,
+ .irq_set_wake = zynq_gpio_set_wake,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+};
+
+static struct irq_chip zynq_gpio_edge_irqchip = {
+ .name = DRIVER_NAME,
+ .irq_enable = zynq_gpio_irq_enable,
+ .irq_ack = zynq_gpio_irq_ack,
.irq_mask = zynq_gpio_irq_mask,
.irq_unmask = zynq_gpio_irq_unmask,
.irq_set_type = zynq_gpio_set_irq_type,
@@ -469,10 +493,6 @@
offset);
generic_handle_irq(gpio_irq);
}
-
- /* clear IRQ in HW */
- writel_relaxed(int_sts, gpio->base_addr +
- ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
}
}
@@ -610,14 +630,14 @@
writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
- ret = gpiochip_irqchip_add(chip, &zynq_gpio_irqchip, 0,
- handle_simple_irq, IRQ_TYPE_NONE);
+ ret = gpiochip_irqchip_add(chip, &zynq_gpio_edge_irqchip, 0,
+ handle_level_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(&pdev->dev, "Failed to add irq chip\n");
goto err_rm_gpiochip;
}
- gpiochip_set_chained_irqchip(chip, &zynq_gpio_irqchip, irq,
+ gpiochip_set_chained_irqchip(chip, &zynq_gpio_edge_irqchip, irq,
zynq_gpio_irqhandler);
pm_runtime_set_active(&pdev->dev);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 7cfdc22..604dbe6 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -307,7 +307,5 @@
void of_gpiochip_remove(struct gpio_chip *chip)
{
gpiochip_remove_pin_ranges(chip);
-
- if (chip->of_node)
- of_node_put(chip->of_node);
+ of_node_put(chip->of_node);
}
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index b7ce0c6..c7e17de 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -16,8 +16,6 @@
*/
struct gpio_desc;
-#ifdef CONFIG_GPIOLIB
-
#define GPIOD_FLAGS_BIT_DIR_SET BIT(0)
#define GPIOD_FLAGS_BIT_DIR_OUT BIT(1)
#define GPIOD_FLAGS_BIT_DIR_VAL BIT(2)
@@ -34,6 +32,8 @@
GPIOD_FLAGS_BIT_DIR_VAL,
};
+#ifdef CONFIG_GPIOLIB
+
/* Acquire and dispose GPIOs */
struct gpio_desc *__must_check __gpiod_get(struct device *dev,
const char *con_id,