[ALSA] hda-codec - Fix surrounds on 3stack mode of AD1988
Modules: HDA Codec driver
Fixed the swapped surround/CLFE on 3stack mode of AD1988.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index fabcbcf..fc14415 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -911,7 +911,7 @@
*
* DAC assignment
* 6stack - front/surr/CLFE/side/opt DACs - 04/06/05/0a/03
- * 3stack - front/surr/CLFE/opt DACs - 04/0a/05/03
+ * 3stack - front/surr/CLFE/opt DACs - 04/05/0a/03
*
* Inputs of Analog Mix (0x20)
* 0:Port-B (front mic)
@@ -988,7 +988,7 @@
};
static hda_nid_t ad1988_3stack_dac_nids[3] = {
- 0x04, 0x0a, 0x05
+ 0x04, 0x05, 0x0a
};
/* for AD1988A revision-2, DAC2-4 are swapped */
@@ -997,7 +997,7 @@
};
static hda_nid_t ad1988_3stack_dac_nids_rev2[3] = {
- 0x04, 0x06, 0x0a
+ 0x04, 0x0a, 0x06
};
static hda_nid_t ad1988_adc_nids[3] = {
@@ -1155,9 +1155,9 @@
static struct snd_kcontrol_new ad1988_3stack_mixers1_rev2[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x04, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x06, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0a, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x06, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x06, 2, 0x0, HDA_OUTPUT),
};
static struct snd_kcontrol_new ad1988_3stack_mixers2[] = {
@@ -1491,7 +1491,7 @@
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x3c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x32, AC_VERB_SET_CONNECT_SEL, 0x1}, /* output sel: DAC 0x06 */
+ {0x32, AC_VERB_SET_CONNECT_SEL, 0x1}, /* output sel: DAC 0x0a */
{0x34, AC_VERB_SET_CONNECT_SEL, 0x0},
/* mute analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
@@ -1657,11 +1657,11 @@
{
static hda_nid_t idx_to_dac[8] = {
/* A B C D E F G H */
- 0x04, 0x06, 0x0a, 0x04, 0x05, 0x06, 0x05, 0x0a
+ 0x04, 0x06, 0x05, 0x04, 0x0a, 0x06, 0x05, 0x0a
};
static hda_nid_t idx_to_dac_rev2[8] = {
/* A B C D E F G H */
- 0x04, 0x05, 0x06, 0x04, 0x0a, 0x05, 0x0a, 0x06
+ 0x04, 0x05, 0x0a, 0x04, 0x06, 0x05, 0x0a, 0x06
};
if (codec->revision_id == AD1988A_REV2)
return idx_to_dac_rev2[idx];
@@ -1898,7 +1898,7 @@
case 0x15: /* port-C - DAC 05 */
snd_hda_codec_write(codec, 0x31, 0, AC_VERB_SET_CONNECT_SEL, 0x00);
break;
- case 0x17: /* port-E - DAC 06 */
+ case 0x17: /* port-E - DAC 0a */
snd_hda_codec_write(codec, 0x32, 0, AC_VERB_SET_CONNECT_SEL, 0x01);
break;
case 0x13: /* mono - DAC 04 */
@@ -2037,6 +2037,9 @@
init_MUTEX(&spec->amp_mutex);
codec->spec = spec;
+ if (codec->revision_id == AD1988A_REV2)
+ snd_printk(KERN_INFO "patch_analog: AD1988A rev.2 is detected, enable workarounds\n");
+
board_config = snd_hda_check_board_config(codec, ad1988_cfg_tbl);
if (board_config < 0 || board_config >= AD1988_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...\n");