diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5c31d2c..b5bd6bd 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2610,6 +2610,57 @@
 	return status;
 }
 
+static bool usb_device_supports_ltm(struct usb_device *udev)
+{
+	if (udev->speed != USB_SPEED_SUPER || !udev->bos || !udev->bos->ss_cap)
+		return false;
+	return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT;
+}
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return 0;
+
+	/* Clear Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return 0;
+
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return;
+
+	/* Set Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return;
+
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
 #ifdef	CONFIG_USB_SUSPEND
 
 /*
@@ -2705,6 +2756,11 @@
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
+	if (usb_disable_ltm(udev)) {
+		dev_err(&udev->dev, "%s Failed to disable LTM before suspend\n.",
+				__func__);
+		return -ENOMEM;
+	}
 	if (usb_unlocked_disable_lpm(udev)) {
 		dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.",
 				__func__);
@@ -2734,7 +2790,8 @@
 		if (udev->usb2_hw_lpm_capable == 1)
 			usb_set_usb2_hardware_lpm(udev, 1);
 
-		/* Try to enable USB3 LPM again */
+		/* Try to enable USB3 LTM and LPM again */
+		usb_enable_ltm(udev);
 		usb_unlocked_enable_lpm(udev);
 
 		/* System sleep transitions should never fail */
@@ -2935,7 +2992,8 @@
 		if (udev->usb2_hw_lpm_capable == 1)
 			usb_set_usb2_hardware_lpm(udev, 1);
 
-		/* Try to enable USB3 LPM */
+		/* Try to enable USB3 LTM and LPM */
+		usb_enable_ltm(udev);
 		usb_unlocked_enable_lpm(udev);
 	}
 
@@ -3488,6 +3546,15 @@
 
 void usb_unlocked_enable_lpm(struct usb_device *udev) { }
 EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
 #endif
 
 
@@ -4673,15 +4740,22 @@
 	}
 	parent_hub = hdev_to_hub(parent_hdev);
 
-	/* Disable LPM while we reset the device and reinstall the alt settings.
-	 * Device-initiated LPM settings, and system exit latency settings are
-	 * cleared when the device is reset, so we have to set them up again.
+	/* Disable LPM and LTM while we reset the device and reinstall the alt
+	 * settings.  Device-initiated LPM settings, and system exit latency
+	 * settings are cleared when the device is reset, so we have to set
+	 * them up again.
 	 */
 	ret = usb_unlocked_disable_lpm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
 		goto re_enumerate;
 	}
+	ret = usb_disable_ltm(udev);
+	if (ret) {
+		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
+				__func__);
+		goto re_enumerate;
+	}
 
 	set_bit(port1, parent_hub->busy_bits);
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -4769,8 +4843,9 @@
 	}
 
 done:
-	/* Now that the alt settings are re-installed, enable LPM. */
+	/* Now that the alt settings are re-installed, enable LTM and LPM. */
 	usb_unlocked_enable_lpm(udev);
+	usb_enable_ltm(udev);
 	return 0;
  
 re_enumerate:
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index c0877b7..0ab7da2 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1175,6 +1175,7 @@
 			dev->actconfig->interface[i] = NULL;
 		}
 		usb_unlocked_disable_lpm(dev);
+		usb_disable_ltm(dev);
 		dev->actconfig = NULL;
 		if (dev->state == USB_STATE_CONFIGURED)
 			usb_set_device_state(dev, USB_STATE_ADDRESS);
@@ -1879,6 +1880,8 @@
 
 	/* Now that the interfaces are installed, re-enable LPM. */
 	usb_unlocked_enable_lpm(dev);
+	/* Enable LTM if it was turned off by usb_disable_device. */
+	usb_enable_ltm(dev);
 
 	/* Now that all the interfaces are set up, register them
 	 * to trigger binding of drivers to interfaces.  probe()
diff --git a/include/linux/usb.h b/include/linux/usb.h
index dea2f0d..f29831b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -633,6 +633,9 @@
 extern int usb_unlocked_disable_lpm(struct usb_device *udev);
 extern void usb_unlocked_enable_lpm(struct usb_device *udev);
 
+extern int usb_disable_ltm(struct usb_device *udev);
+extern void usb_enable_ltm(struct usb_device *udev);
+
 /*-------------------------------------------------------------------------*/
 
 /* for drivers using iso endpoints */