ACPI: Add "acpi.power_nocheck=1" to disable power state check in power transition
Maybe the incorrect power state is returned on the bogus bios, which
is different with the real power state. For example: the bios returns D0
state and the real power state is D3. OS expects to set the device to D0
state. In such case if OS uses the power state returned by the BIOS and
checks the device power state very strictly in power transition, the device
can't be transited to the correct power state.
So the boot option of "acpi.power_nocheck=1" is added to avoid checking
the device power in the course of device power transition.
http://bugzilla.kernel.org/show_bug.cgi?id=8049
http://bugzilla.kernel.org/show_bug.cgi?id=11000
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 44d1bd1..99cf83f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -251,6 +251,14 @@
Warning: Many of these options can produce a lot of
output and make your system unusable. Be very careful.
+ acpi.power_nocheck= [HW,ACPI]
+ Format: 1/0 enable/disable the check of power state.
+ On some bogus BIOS the _PSC object/_STA object of
+ power resource can't return the correct device power
+ state. In such case it is unneccessary to check its
+ power state again in power transition.
+ 1 : disable the power state check
+
acpi_pm_good [X86-32,X86-64]
Override the pmtimer bug detection: force the kernel
to assume that this machine's pmtimer latches its value
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ccae305..91bdeb3 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -223,7 +223,19 @@
/*
* Get device's current power state
*/
- acpi_bus_get_power(device->handle, &device->power.state);
+ if (!acpi_power_nocheck) {
+ /*
+ * Maybe the incorrect power state is returned on the bogus
+ * bios, which is different with the real power state.
+ * For example: the bios returns D0 state and the real power
+ * state is D3. OS expects to set the device to D0 state. In
+ * such case if OS uses the power state returned by the BIOS,
+ * the device can't be transisted to the correct power state.
+ * So if the acpi_power_nocheck is set, it is unnecessary to
+ * get the power state by calling acpi_bus_get_power.
+ */
+ acpi_bus_get_power(device->handle, &device->power.state);
+ }
if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index e7bab75..7ff7349 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -54,6 +54,14 @@
#define ACPI_POWER_RESOURCE_STATE_OFF 0x00
#define ACPI_POWER_RESOURCE_STATE_ON 0x01
#define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
+
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "acpi."
+int acpi_power_nocheck;
+module_param_named(power_nocheck, acpi_power_nocheck, bool, 000);
+
static int acpi_power_add(struct acpi_device *device);
static int acpi_power_remove(struct acpi_device *device, int type);
static int acpi_power_resume(struct acpi_device *device);
@@ -228,12 +236,18 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource->device->handle, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_ON)
- return -ENOEXEC;
-
+ if (!acpi_power_nocheck) {
+ /*
+ * If acpi_power_nocheck is set, it is unnecessary to check
+ * the power state after power transition.
+ */
+ result = acpi_power_get_state(resource->device->handle,
+ &state);
+ if (result)
+ return result;
+ if (state != ACPI_POWER_RESOURCE_STATE_ON)
+ return -ENOEXEC;
+ }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D0;
@@ -279,11 +293,17 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(handle, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_OFF)
- return -ENOEXEC;
+ if (!acpi_power_nocheck) {
+ /*
+ * If acpi_power_nocheck is set, it is unnecessary to check
+ * the power state after power transition.
+ */
+ result = acpi_power_get_state(handle, &state);
+ if (result)
+ return result;
+ if (state != ACPI_POWER_RESOURCE_STATE_OFF)
+ return -ENOEXEC;
+ }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D3;
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index e5f38e5..efbaa27 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -93,6 +93,7 @@
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
+extern int acpi_power_nocheck;
#endif
/* --------------------------------------------------------------------------