/*
 * Copyright (C) 2010 Trusted Logic S.A.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program;
 *
 */
#define pr_fmt(fmt)     "[pn547] %s: " fmt, __func__

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/miscdevice.h>
#include <linux/spinlock.h>
#include "pn547.h"
#include <linux/wakelock.h>
#include <linux/of_gpio.h>
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
#include <mach/msm_xo.h>
#include <linux/workqueue.h>
#endif
#include <linux/clk.h>
#include <linux/regulator/consumer.h>

#include <asm/siginfo.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sched/signal.h>
#include "./nfc_logger/nfc_logger.h"

#define SIG_NFC 44
#define MAX_BUFFER_SIZE		512
#define NFC_DEBUG 0

#define FEATURE_NFC_TEST
#if !defined(CONFIG_NFC_FEATURE_SN100U)
#define FEATURE_PN80T
#else
#define FEATURE_SN100X
/* VEN is kept ON all the time if you define the macro VEN_ALWAYS_ON.
Used for SN100 usecases */
#define VEN_ALWAYS_ON
#endif

#ifdef CONFIG_ESE_SECURE
extern int tz_tee_ese_secure_check(void);
enum secure_state {
	NOT_CHECKED,
	ESE_SECURED,
	ESE_NOT_SECURED,
};
int nfc_ese_secured;
#endif

struct pn547_dev {
	wait_queue_head_t read_wq;
	struct mutex read_mutex;
	struct i2c_client *client;
	struct miscdevice pn547_device;
	unsigned int ven_gpio;
	unsigned int firm_gpio;
	unsigned int irq_gpio;
	int pvdd;
	const char *nfc_pvdd;
	void __iomem	*clkctrl;

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	unsigned int ese_pwr_req;
#ifdef ISO_RST
	unsigned int		iso_rst_gpio; /* ISO-RST pin gpio*/
#endif
	enum p61_access_state  p61_current_state;
	struct completion ese_comp;
	struct completion svdd_sync_comp;
	struct completion dwp_onoff_comp;
#endif
	bool                spi_ven_enabled;
	bool                nfc_ven_enabled;

	atomic_t irq_enabled;
	atomic_t read_flag;
	bool cancel_read;
	struct wake_lock nfc_wake_lock;
	struct wake_lock nfc_clk_wake_lock;
	struct clk *nfc_clock;
	int i2c_probe;
	struct   clk *clk;
	char *r_buf;
	char *w_buf;

	unsigned int clk_req_gpio;
	unsigned int clk_req_irq;
	phys_addr_t clkctrl_addr; /*use NFC block of AP*/
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	struct msm_xo_voter *nfc_clock;
	struct work_struct work_nfc_clock;
	struct workqueue_struct *wq_clock;
	bool clock_state;
#endif
	long	nfc_service_pid; /*used to signal the nfc the nfc service */
};

static struct pn547_dev *pn547_dev;

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
static void release_ese_lock(enum p61_access_state  p61_current_state);
//static int signal_handler(enum p61_access_state state, long nfc_pid);
static int signal_handler(int state, long nfc_pid);
static void p61_get_access_state(struct pn547_dev *pn547_dev,
	enum p61_access_state *current_state);

static unsigned char svdd_sync_wait;
static unsigned char p61_trans_acc_on;
static struct semaphore dwp_onoff_release_sema;
#endif

static void set_pd(struct pn547_dev *info, int power)
{
	if (info->ven_gpio > 0) {
		gpio_direction_output(info->ven_gpio, power);
	}
	else {
		unsigned int val = 0;
		int pd_active=0;

		val = readl(info->clkctrl);
		pd_active = (val & PN547_NFC_CLKCTRL_PD_POLA);
		if (!pd_active) {
			if (power)
				val &= ~PN547_NFC_CLKCTRL_PD;
			else
				val |= PN547_NFC_CLKCTRL_PD;
		} else {
			if (power)
				val |= PN547_NFC_CLKCTRL_PD;
			else
				val &= ~PN547_NFC_CLKCTRL_PD;
		}
		writel(val, info->clkctrl);
		NFC_LOG_INFO("%s , val : %x\n", __func__,readl(info->clkctrl));
	}
}

static irqreturn_t pn547_dev_irq_handler(int irq, void *dev_id)
{
	struct pn547_dev *pn547_dev = dev_id;

	if (!gpio_get_value(pn547_dev->irq_gpio)) {
#if NFC_DEBUG
		NFC_LOG_ERR("irq_gpio = %d\n",
			gpio_get_value(pn547_dev->irq_gpio));
#endif
		return IRQ_HANDLED;
	}

	/* Wake up waiting readers */
	atomic_set(&pn547_dev->read_flag, 1);
	wake_up(&pn547_dev->read_wq);

#if NFC_DEBUG
	NFC_LOG_REC("irq handler called\n");
#endif

	wake_lock_timeout(&pn547_dev->nfc_wake_lock, 2*HZ);
	return IRQ_HANDLED;
}

#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
static void nfc_work_func_clock(struct work_struct *work)
{
	struct pn547_dev *pn547_dev = container_of(work, struct pn547_dev,
					      work_nfc_clock);
	int ret = 0;

	if (gpio_get_value(pn547_dev->clk_req_gpio)) {
		if (pn547_dev->clock_state == false) {
			ret = msm_xo_mode_vote(pn547_dev->nfc_clock,
					MSM_XO_MODE_ON);
			if (ret < 0)
				NFC_LOG_ERR("Failed to vote TCX0_A1 ON (%d)\n",
						ret);
			pn547_dev->clock_state = true;
		}
	} else {
		if (pn547_dev->clock_state == true) {
			ret = msm_xo_mode_vote(pn547_dev->nfc_clock,
					MSM_XO_MODE_OFF);
			if (ret < 0)
				NFC_LOG_ERR("Failed to vote TCX0_A1 OFF (%d)\n",
						ret);
			pn547_dev->clock_state = false;
		}
	}
}

static irqreturn_t pn547_dev_clk_req_irq_handler(int irq, void *dev_id)
{
	struct pn547_dev *pn547_dev = dev_id;

	queue_work(pn547_dev->wq_clock, &pn547_dev->work_nfc_clock);
	return IRQ_HANDLED;
}
#endif
static irqreturn_t pn547_nfc_clk_irq(int irq, void *dev_id)
{
	struct pn547_dev *pn547_dev = dev_id;

	if (gpio_get_value(pn547_dev->clk_req_gpio)) {
		if(!wake_lock_active(&pn547_dev->nfc_clk_wake_lock))
			wake_lock(&pn547_dev->nfc_clk_wake_lock);
	} else {
		if (wake_lock_active(&pn547_dev->nfc_clk_wake_lock))
			wake_unlock(&pn547_dev->nfc_clk_wake_lock);
	}
#if 0
	wake_lock_timeout(&pn547_dev->nfc_clk_wake_lock, 2*HZ);
	pr_info("nfc_wake_lock timeout : %s \n", __func__);

#endif

	return IRQ_HANDLED;
}

static ssize_t pn547_dev_read(struct file *filp, char __user *buf,
		size_t count, loff_t *offset)
{
	struct pn547_dev *pn547_dev = filp->private_data;
	int ret = 0;

	if (count > MAX_BUFFER_SIZE)
		count = MAX_BUFFER_SIZE;

	NFC_LOG_DBG("reading %zu bytes. irq=%s\n", count,
			gpio_get_value(pn547_dev->irq_gpio) ? "1" : "0");

#if NFC_DEBUG
	NFC_LOG_INFO("+ r\n");
#endif

	mutex_lock(&pn547_dev->read_mutex);
	memset(pn547_dev->r_buf, 0, count);

	if (!gpio_get_value(pn547_dev->irq_gpio)) {
		atomic_set(&pn547_dev->read_flag, 0);
		if (filp->f_flags & O_NONBLOCK) {
			NFC_LOG_ERR("O_NONBLOCK\n");
			ret = -EAGAIN;
			goto fail;
		}

#if NFC_DEBUG
		NFC_LOG_INFO("wait_event_interruptible : in\n");
#endif
		if (!gpio_get_value(pn547_dev->irq_gpio))
			ret = wait_event_interruptible(pn547_dev->read_wq,
					atomic_read(&pn547_dev->read_flag));

#if NFC_DEBUG
		NFC_LOG_INFO("h\n");
#endif

		if (pn547_dev->cancel_read) {
			pn547_dev->cancel_read = false;
			ret = -1;
			goto fail;
		}

		if (ret)
			goto fail;
	}

	/* Read data */
	ret = i2c_master_recv(pn547_dev->client, pn547_dev->r_buf, count);
	NFC_LOG_REC("recv size : %d\n", ret);

#if NFC_DEBUG
	NFC_LOG_INFO("i2c_master_recv\n");
#endif
	mutex_unlock(&pn547_dev->read_mutex);
	if (ret < 0) {
		NFC_LOG_ERR("i2c_master_recv returned (%d,%d)\n",
				ret, pn547_dev->i2c_probe);
		return ret;
	}

	if (ret > count) {
		NFC_LOG_ERR("received too many bytes from i2c (%d)\n",
				ret);
		return -EIO;
	}

	if (copy_to_user(buf, pn547_dev->r_buf, ret)) {
		NFC_LOG_ERR("failed to copy to user space\n");
		return -EFAULT;
	}
	return ret;

fail:
	mutex_unlock(&pn547_dev->read_mutex);
	return ret;
}

static ssize_t pn547_dev_write(struct file *filp, const char __user *buf,
		size_t count, loff_t *offset)
{
	struct pn547_dev *pn547_dev;
	int ret = 0, retry = 2;

	pn547_dev = filp->private_data;

#if NFC_DEBUG
	NFC_LOG_INFO("+ w\n");
#endif

	if (count > MAX_BUFFER_SIZE)
		count = MAX_BUFFER_SIZE;

	ret = copy_from_user(pn547_dev->w_buf, buf, count);
	if (ret) {
		NFC_LOG_ERR("failed to copy from user space %d\n", ret);
		return -EFAULT;
	}

	NFC_LOG_REC("writing %zu bytes.\n", count);
	/* Write data */
	do {
		retry--;
		ret = i2c_master_send(pn547_dev->client, pn547_dev->w_buf, count);
		if (ret == count)
			break;
		usleep_range(6000, 10000); /* Retry, chip was in standby */
#if NFC_DEBUG
		NFC_LOG_INFO("retry = %d\n", retry);
#endif
	} while (retry);

#if NFC_DEBUG
	NFC_LOG_INFO("- w\n");
#endif

	if (ret != count) {
		NFC_LOG_ERR("i2c_master_send returned (%d,%d)\n",
				ret, pn547_dev->i2c_probe);
		ret = -EIO;
	}

	return ret;
}

static int pn547_dev_open(struct inode *inode, struct file *filp)
{
	struct pn547_dev *pn547_dev = container_of(filp->private_data,
						   struct pn547_dev,
						   pn547_device);

	filp->private_data = pn547_dev;
	NFC_LOG_INFO("imajor:%d, iminor:%d (%d)\n", imajor(inode), iminor(inode),
			pn547_dev->i2c_probe);
	nfc_logger_set_max_count(-1);

#ifdef CONFIG_ESE_SECURE
	if (nfc_ese_secured == NOT_CHECKED) {
		int ret = 0;

		ret = tz_tee_ese_secure_check();
		if (ret) {
			nfc_ese_secured = ESE_NOT_SECURED;
			NFC_LOG_ERR("eSE spi is not Secured\n"); 
			return -EBUSY;
		}
		nfc_ese_secured = ESE_SECURED;
	} else if (nfc_ese_secured == ESE_NOT_SECURED) { 
		NFC_LOG_ERR("eSE spi is not Secured\n"); 
		return -EBUSY;
	}
#endif

	return 0;
}

static int pn547_dev_release(struct inode *inode, struct file *filp)
{
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	enum p61_access_state current_state;
#endif

	NFC_LOG_INFO("release\n");
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	p61_get_access_state(pn547_dev, &current_state);
	if ((p61_trans_acc_on ==  1) && ((current_state &
			(P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0))
		release_ese_lock(P61_STATE_WIRED);
#endif
	return 0;
}

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
static void dwp_onoff(long nfc_service_pid, enum p61_access_state origin)
{
	int timeout = 500; /*500 ms timeout*/
	unsigned long tempJ = msecs_to_jiffies(timeout);

	if (nfc_service_pid) {
		if (signal_handler(origin, nfc_service_pid) == 0) {
			reinit_completion(&pn547_dev->dwp_onoff_comp);
			if (!wait_for_completion_timeout(&pn547_dev->dwp_onoff_comp, tempJ))
				NFC_LOG_INFO("wait protection: Timeout\n");

			NFC_LOG_INFO("wait protection : released\n");
		}
	}
}
static int release_dwp_onoff(void)
{
	int timeout = 500; //500 ms timeout
	unsigned long tempJ = msecs_to_jiffies(timeout);

	NFC_LOG_INFO("enter\n");
	complete(&pn547_dev->dwp_onoff_comp);
	{
		sema_init(&dwp_onoff_release_sema, 0);
		if(down_timeout(&dwp_onoff_release_sema, tempJ) != 0)
		{
			NFC_LOG_INFO("Dwp On/off release wait protection: Timeout");
		}
		NFC_LOG_INFO("Dwp On/Off release wait protection : released");
	}
	return 0;
}

static int set_nfc_pid(unsigned long arg)
{
	pid_t pid = arg;
	struct task_struct *task = NULL;

	pn547_dev->nfc_service_pid = arg;

	if (arg == 0)
		goto done;

	task = get_pid_task(find_vpid(pid), PIDTYPE_PID);
	if (task) {
		NFC_LOG_INFO("task->comm: %s\n", task->comm);
		if (!strncmp(task->comm, "com.android.nfc", 15)) {
			pn547_dev->nfc_service_pid = arg;
			goto done;
		} else {
			NFC_LOG_INFO("it's not nfc pid : %ld, %s\n", pn547_dev->nfc_service_pid, task->comm);
		}
	}

	pn547_dev->nfc_service_pid = 0;
done:
	if (task)
		put_task_struct(task);

	NFC_LOG_INFO("The NFC Service PID is %ld\n", pn547_dev->nfc_service_pid);

	return 0;
}

static void p61_update_access_state(struct pn547_dev *pn547_dev,
		enum p61_access_state current_state, bool set)
{
	if (current_state) {
		if (set) {
			if (pn547_dev->p61_current_state == P61_STATE_IDLE)
				pn547_dev->p61_current_state
						= P61_STATE_INVALID;
			pn547_dev->p61_current_state |= current_state;
		} else {
			pn547_dev->p61_current_state &= (unsigned int)(~current_state);
			if (!pn547_dev->p61_current_state)
				pn547_dev->p61_current_state = P61_STATE_IDLE;
		}
	}
	NFC_LOG_INFO("Exit current_state = 0x%x\n",
			pn547_dev->p61_current_state);
}

static void p61_get_access_state(struct pn547_dev *pn547_dev,
	enum p61_access_state *current_state)
{
	if (current_state == NULL)
		NFC_LOG_ERR("invalid state of p61_access_state\n");
	else
		*current_state = pn547_dev->p61_current_state;
}

//static int signal_handler(enum p61_access_state state, long nfc_pid)
static int signal_handler(int state, long nfc_pid)
{
	struct siginfo sinfo;
	pid_t pid;
	struct task_struct *task = NULL;
	int sigret = 0;
	int ret = 0;

	NFC_LOG_INFO("pid:%ld\n", nfc_pid);
	if (nfc_pid == 0) {
		NFC_LOG_ERR("nfc_pid is clear don't call.\n");
		return -EPERM;
	}

	memset(&sinfo, 0, sizeof(struct siginfo));
	sinfo.si_signo = SIG_NFC;
	sinfo.si_code = SI_QUEUE;
	sinfo.si_int = state;
	pid = nfc_pid;

	task = get_pid_task(find_vpid(pid), PIDTYPE_PID);
	if (task) {
		NFC_LOG_INFO("task->comm: %s.\n", task->comm);
		sigret = send_sig_info(SIG_NFC, &sinfo, task);
		if (sigret < 0) {
			NFC_LOG_ERR("send_sig_info failed.. %d.\n", sigret);
			ret = -EPERM;
		}

		put_task_struct(task);
	} else {
		NFC_LOG_ERR("finding task from PID failed\n");
		ret = -EPERM;
	}

	return ret;
}

static void svdd_sync_onoff(long nfc_service_pid, enum p61_access_state origin)
{
	int timeout = 500; /*500 ms timeout*/
	unsigned long tempJ = msecs_to_jiffies(timeout);

	NFC_LOG_INFO("Enter nfc_service_pid: %ld\n", nfc_service_pid);
	if (nfc_service_pid) {
		if (signal_handler(origin, nfc_service_pid) == 0) {
			reinit_completion(&pn547_dev->svdd_sync_comp);
			svdd_sync_wait = 1;
			NFC_LOG_INFO("Waiting for svdd protection response");
			/*if (down_timeout(&svdd_sync_onoff_sema, tempJ) != 0)*/
			if (!wait_for_completion_timeout(&pn547_dev->svdd_sync_comp, tempJ))
				NFC_LOG_ERR("svdd wait protection: Timeout");

			NFC_LOG_INFO("svdd wait protection : released");
			svdd_sync_wait = 0;
		}
	}
	NFC_LOG_INFO("Exit\n");
}

static int release_svdd_wait(void)
{
	unsigned char i = 0;

	NFC_LOG_INFO("Enter\n");
	for (i = 0; i < 9; i++) {
		if (svdd_sync_wait) {
			complete(&pn547_dev->svdd_sync_comp);
			svdd_sync_wait = 0;
			break;
		}
		usleep_range(10000, 10100);
	}
	NFC_LOG_INFO("Exit\n");
	return 0;
}

static int pn547_set_pwr(struct pn547_dev *pdev, unsigned long arg)
{
	int ret = 0;
	enum p61_access_state current_state;

	p61_get_access_state(pdev, &current_state);
	switch (arg) {
	case 0: /* power off */
		if (atomic_read(&pdev->irq_enabled) == 1) {
			atomic_set(&pdev->irq_enabled, 0);
			disable_irq_wake(pdev->client->irq);
			disable_irq_nosync(pdev->client->irq);
		}
		if (wake_lock_active(&pn547_dev->nfc_clk_wake_lock))
			wake_unlock(&pn547_dev->nfc_clk_wake_lock);

		if (current_state & P61_STATE_DWNLD)
			p61_update_access_state(pdev, P61_STATE_DWNLD, false);

		if ((current_state & (P61_STATE_WIRED|P61_STATE_SPI
			|P61_STATE_SPI_PRIO)) == 0)
			p61_update_access_state(pdev, P61_STATE_IDLE, true);

		NFC_LOG_INFO("power off, irq=%d\n", atomic_read(&pdev->irq_enabled));
		gpio_set_value(pdev->firm_gpio, 0);

		pdev->nfc_ven_enabled = false;
		/* Don't change Ven state if spi made it high */
#ifndef VEN_ALWAYS_ON
		if (pdev->spi_ven_enabled == false)
			set_pd(pn547_dev, PN547_NFC_PW_OFF);
#endif
		usleep_range(4900, 5000);
		break;
	case 1: /* power on */
		if ((current_state & (P61_STATE_WIRED|P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0)
			p61_update_access_state(pdev, P61_STATE_IDLE, true);

		if (current_state & P61_STATE_DWNLD)
			p61_update_access_state(pdev, P61_STATE_DWNLD, false);

		gpio_set_value(pdev->firm_gpio, 0);

		pdev->nfc_ven_enabled = true;
#ifndef VEN_ALWAYS_ON
		if (pdev->spi_ven_enabled == false)
			set_pd(pn547_dev, PN547_NFC_PW_ON);
#endif
		usleep_range(4900, 5000);
		if (atomic_read(&pdev->irq_enabled) == 0) {
			atomic_set(&pdev->irq_enabled, 1);
			enable_irq(pdev->client->irq);
			enable_irq_wake(pdev->client->irq);
		}
		svdd_sync_wait = 0;

		NFC_LOG_INFO("power on, irq=%d\n", atomic_read(&pdev->irq_enabled));
		break;
	case 2:
		if (current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) {
			/* NFCC fw/download should not be allowed if p61 is used by SPI */
			NFC_LOG_ERR("not be allowed to reset/FW download\n");
			return -EBUSY; /* Device or resource busy */
		}
		pdev->nfc_ven_enabled = true;
		if (pdev->spi_ven_enabled == false) {
			/* power on with firmware download (requires hw reset) */
			p61_update_access_state(pdev, P61_STATE_DWNLD, true);
			set_pd(pn547_dev, PN547_NFC_PW_ON);
			gpio_set_value(pdev->firm_gpio, 1);
			usleep_range(4900, 5000);
			set_pd(pn547_dev, PN547_NFC_PW_OFF);
			usleep_range(4900, 5000);
			set_pd(pn547_dev, PN547_NFC_PW_ON);
			usleep_range(4900, 5000);
			if (atomic_read(&pdev->irq_enabled) == 0) {
				atomic_set(&pdev->irq_enabled, 1);
				enable_irq(pdev->client->irq);
				enable_irq_wake(pdev->client->irq);
			}
			NFC_LOG_INFO("power on with firmware, irq=%d\n",
				atomic_read(&pdev->irq_enabled));
			NFC_LOG_INFO("VEN=%d FIRM=%d\n", gpio_get_value(pdev->ven_gpio),
				gpio_get_value(pdev->firm_gpio));
		}
		break;
#ifdef FEATURE_SN100X
	case 3:
		/*NFC Service called ISO-RST*/
		if(current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) {
			return -EPERM; /* Operation not permitted */
		}
		if(current_state & P61_STATE_WIRED) {
			p61_update_access_state(pn547_dev, P61_STATE_WIRED, false);
		}
#ifdef ISO_RST
		gpio_set_value(pn547_dev->iso_rst_gpio, 0);
		msleep(50);
		gpio_set_value(pn547_dev->iso_rst_gpio, 1);
		msleep(50);
		NFC_LOG_INFO("%s ISO RESET from DWP DONE\n", __func__);
#endif
		break;
	case 4:
		NFC_LOG_INFO("%s FW dwldioctl called from NFC \n", __func__);
		/*NFC Service called FW dwnld*/
		if (pn547_dev->firm_gpio) {
			p61_update_access_state(pn547_dev, P61_STATE_DWNLD, true);
			gpio_set_value(pn547_dev->firm_gpio, 1);
			msleep(10);
		}
		break;
	case 5:
		msleep(10);
		gpio_set_value(pn547_dev->ven_gpio, 0);
		msleep(10);
		gpio_set_value(pn547_dev->ven_gpio, 1);
		msleep(10);
		NFC_LOG_INFO("%s VEN reset DONE >>>>>>>\n", __func__);
		break;
#elif defined (FEATURE_PN80T)
	case 3:
		NFC_LOG_INFO("Read Cancel\n");
		pdev->cancel_read = true;
		atomic_set(&pdev->read_flag, 1);
		wake_up(&pdev->read_wq);
		break;
#endif
	default:
		NFC_LOG_ERR("bad arg %lu\n", arg);
		/* changed the p61 state to idle*/
		ret = -EINVAL;
	}
	return ret;
}

static int pn547_p61_set_spi_pwr(struct pn547_dev *pdev,
	unsigned long arg)
{
	int ret = 0;
	enum p61_access_state current_state;

	p61_get_access_state(pn547_dev, &current_state);
	NFC_LOG_INFO("PN61_SET_SPI_PWR cur=0x%x\n", current_state);
	switch (arg) {
	case 0: /*else if (arg == 0)*/
#if defined (FEATURE_PN80T) || defined (FEATURE_SN100X)
		NFC_LOG_INFO("power off ese PN80T\n");
		if (current_state & P61_STATE_SPI_PRIO) {
			p61_update_access_state(pn547_dev,
				P61_STATE_SPI_PRIO, false);
			if (!(current_state & P61_STATE_JCP_DWNLD)) {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid %ld\n", pn547_dev->nfc_service_pid);
					if (!(current_state & P61_STATE_WIRED)) {
						svdd_sync_onoff(pn547_dev->nfc_service_pid,
							P61_STATE_SPI_SVDD_SYNC_START|P61_STATE_SPI_PRIO_END);
					} else
						signal_handler(P61_STATE_SPI_PRIO_END,
							pn547_dev->nfc_service_pid);
				} else {
					NFC_LOG_INFO("invalid nfc svc pid %ld\n",
						pn547_dev->nfc_service_pid);
				}
			} else if (!(current_state & P61_STATE_WIRED)) {
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_SPI_SVDD_SYNC_START);
			}
			pn547_dev->spi_ven_enabled = false;
#ifndef VEN_ALWAYS_ON
			if (!(current_state & P61_STATE_WIRED)) {
				ese_spi_pinctrl(0);/*for factory spi pinctrl*/
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
						P61_STATE_SPI_SVDD_SYNC_END);
			}
			if (pn547_dev->nfc_ven_enabled == false) {
				gpio_set_value(pn547_dev->ven_gpio, 0);
				usleep_range(10000, 10100);
			}
#endif
		} else if (current_state & P61_STATE_SPI) {
			if (!(current_state & P61_STATE_WIRED) && !(current_state & P61_STATE_JCP_DWNLD)) {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid ---- %ld\n",
						pn547_dev->nfc_service_pid);
					svdd_sync_onoff(pn547_dev->nfc_service_pid,
						P61_STATE_SPI_SVDD_SYNC_START|P61_STATE_SPI_END);
				} else {
					NFC_LOG_ERR("invalid nfc svc pid %ld\n",
						pn547_dev->nfc_service_pid);
				}
#ifndef VEN_ALWAYS_ON
				ese_spi_pinctrl(0);
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
#endif
				p61_update_access_state(pn547_dev,
					P61_STATE_SPI, false);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
						P61_STATE_SPI_SVDD_SYNC_END);
			}
			/*If JCOP3.2 or 3.3 for handling triple mode protection signal NFC service */
			else {
				if (!(current_state & P61_STATE_JCP_DWNLD)) {
					if (pn547_dev->nfc_service_pid) {
						NFC_LOG_INFO("nfc svc pid %ld\n",
							pn547_dev->nfc_service_pid);
						svdd_sync_onoff(pn547_dev->nfc_service_pid,
							P61_STATE_SPI_SVDD_SYNC_START|P61_STATE_SPI_END);
					} else {
						NFC_LOG_ERR("invalid nfc svc pid %ld\n",
							pn547_dev->nfc_service_pid);
					}
				} else {
					svdd_sync_onoff(
						pn547_dev->nfc_service_pid,
						P61_STATE_SPI_SVDD_SYNC_START);
				}
#ifndef VEN_ALWAYS_ON
				ese_spi_pinctrl(0);
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
				p61_update_access_state(pn547_dev,
						P61_STATE_SPI, false);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_SPI_SVDD_SYNC_END);
				NFC_LOG_INFO("PN80T ese_pwr_gpio off");
#endif
			}
			pn547_dev->spi_ven_enabled = false;
#ifndef VEN_ALWAYS_ON
			if (pn547_dev->nfc_ven_enabled == false) {
				gpio_set_value(pn547_dev->ven_gpio, 0);
				usleep_range(10000, 10100);
			}
#endif
		} else {
			NFC_LOG_ERR("power off ese failed, current_state = 0x%x\n",
				pn547_dev->p61_current_state);
			ret = -EPERM; /* Operation not permitted */
		}
#else
		NFC_LOG_INFO("power off ese\n");
		if (current_state & P61_STATE_SPI_PRIO) {
			p61_update_access_state(pn547_dev, P61_STATE_SPI_PRIO, false);
			if (!(current_state & P61_STATE_WIRED)) {
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_SPI_SVDD_SYNC_START|P61_STATE_SPI_PRIO_END);
				ese_spi_pinctrl(0);
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
						P61_STATE_SPI_SVDD_SYNC_END);
			} else {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid %ld\n",
						pn547_dev->nfc_service_pid);
					signal_handler(P61_STATE_SPI_PRIO_END,	pn547_dev->nfc_service_pid);
				} else {
					NFC_LOG_ERR("invalid nfc svc pid %ld\n",
						pn547_dev->nfc_service_pid);
				}
			}
			pn547_dev->spi_ven_enabled = false;
			if (pn547_dev->nfc_ven_enabled == false) {
				gpio_set_value(pn547_dev->ven_gpio, 0);
				usleep_range(10000, 10100);
			}
		} else if (current_state & P61_STATE_SPI) {
			p61_update_access_state(pn547_dev,
					P61_STATE_SPI, false);
			if (!(current_state & P61_STATE_WIRED)) {
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_SPI_SVDD_SYNC_START|P61_STATE_SPI_END);
				ese_spi_pinctrl(0);
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_SPI_SVDD_SYNC_END);
			}
			/*If JCOP3.2 or 3.3 for handling triple mode protection signal NFC service */
			else {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid %ld\n",
						pn547_dev->nfc_service_pid);
					signal_handler(P61_STATE_SPI_END, pn547_dev->nfc_service_pid);
				} else {
					NFC_LOG_ERR("invalid nfc service pid.. %ld\n",
						pn547_dev->nfc_service_pid);
				}
			}
			pn547_dev->spi_ven_enabled = false;
			if (pn547_dev->nfc_ven_enabled == false) {
				gpio_set_value(pn547_dev->ven_gpio, 0);
				usleep_range(10000, 10100);
			}
		} else {
			NFC_LOG_ERR("power off ese failed, current_state = 0x%x\n",
				pn547_dev->p61_current_state);
			ret = -EPERM; /* Operation not permitted */
		}
#endif
		break;
	case 1: /*if (arg == 1) */
		NFC_LOG_INFO("power on ese\n");
		if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO
				|P61_STATE_DWNLD)) == 0) {
			/*To handle triple mode protection signal NFC service when SPI session started */
			if (!(current_state & P61_STATE_JCP_DWNLD)) {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid ---- %ld\n",
						pn547_dev->nfc_service_pid);
					/*signal_handler(P61_STATE_SPI, pn547_dev->nfc_service_pid);*/
					dwp_onoff(pn547_dev->nfc_service_pid, P61_STATE_SPI);
				} else {
					NFC_LOG_ERR("invalid nfc svc pid %ld\n",
						pn547_dev->nfc_service_pid);
				}
			}
			pn547_dev->spi_ven_enabled = true;
#ifndef VEN_ALWAYS_ON
			if (pn547_dev->nfc_ven_enabled == false) {
			/*provide power to NFCC if, NFC service not provided*/
				gpio_set_value(pn547_dev->ven_gpio, 1);
				usleep_range(10000, 10100);
			}
			/* pull the gpio to high once NFCC is power on*/
			gpio_set_value(pn547_dev->ese_pwr_req, 1);
			ese_spi_pinctrl(1);
			usleep_range(10000, 10100);
			p61_update_access_state(pn547_dev, P61_STATE_SPI, true);
			/* Releasing the DWP Link ON/OF release ioctl after
			 * protecting the critical area*/
			if(pn547_dev->nfc_service_pid){
				up(&dwp_onoff_release_sema);
			}
#endif
		} else {
			NFC_LOG_ERR("PN61_SET_SPI_PWR - power on ese failed\n");
			ret = -EBUSY; /* Device or resource busy */
		}
		break;
	case 2: /*	else if (arg == 2) */
		NFC_LOG_INFO("reset\n");
		if (current_state &
		(P61_STATE_IDLE|P61_STATE_SPI|P61_STATE_SPI_PRIO)) {
			if (pn547_dev->spi_ven_enabled == false) {
				pn547_dev->spi_ven_enabled = true;
#ifndef VEN_ALWAYS_ON
				if (pn547_dev->nfc_ven_enabled == false) {
					/* provide power to NFCC if,	NFC service not provided */
					gpio_set_value(pn547_dev->ven_gpio, 1);
					usleep_range(10000, 10100);
				}
#endif
			}
			svdd_sync_onoff(pn547_dev->nfc_service_pid,
				P61_STATE_SPI_SVDD_SYNC_START);
#ifndef VEN_ALWAYS_ON
			gpio_set_value(pn547_dev->ese_pwr_req, 0);
			msleep(60);
#endif
			svdd_sync_onoff(pn547_dev->nfc_service_pid,
				P61_STATE_SPI_SVDD_SYNC_END);
#ifndef VEN_ALWAYS_ON
			gpio_set_value(pn547_dev->ese_pwr_req, 1);
			usleep_range(10000, 10100);
#endif
		} else {
			NFC_LOG_ERR("reset failed\n");
			ret = -EBUSY; /* Device or resource busy */
		}
		break;
	case 3: /*else if (arg == 3) */
		NFC_LOG_INFO("Prio Session Start power on ese\n");
		if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO|P61_STATE_DWNLD)) == 0) {
			p61_update_access_state(pn547_dev, P61_STATE_SPI_PRIO, true);
#if defined (FEATURE_PN80T) || defined (FEATURE_SN100X)
			if (current_state & P61_STATE_WIRED)
#endif
			{
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid %ld\n",
						pn547_dev->nfc_service_pid);
					/*signal_handler(P61_STATE_SPI_PRIO, pn547_dev->nfc_service_pid);*/
					dwp_onoff(pn547_dev->nfc_service_pid, P61_STATE_SPI_PRIO);
				} else {
					NFC_LOG_ERR("invalid nfc service pid.. %ld\n",
						pn547_dev->nfc_service_pid);
				}
			}
			pn547_dev->spi_ven_enabled = true;
#ifndef VEN_ALWAYS_ON
			if (pn547_dev->nfc_ven_enabled == false) {
				/* provide power to NFCC if,	NFC service not provided */
				gpio_set_value(pn547_dev->ven_gpio, 1);
				usleep_range(10000, 10100);
			}
			/* pull the gpio to high once NFCC is power on*/
			gpio_set_value(pn547_dev->ese_pwr_req, 1);
			ese_spi_pinctrl(1);
			usleep_range(10000, 10100);
#endif
		} else {
			NFC_LOG_ERR("Prio Session Start power on ese failed 0x%x\n",
				current_state);
			ret = -EBUSY; /* Device or resource busy */
		}
		break;
	case 4: /*else if (arg == 4)*/
		if (current_state & P61_STATE_SPI_PRIO) {
			NFC_LOG_INFO("Prio Session Ending...\n");
			p61_update_access_state(pn547_dev, P61_STATE_SPI_PRIO, false);
			/* after SPI prio timeout, the state is changing from SPI prio to SPI */
			p61_update_access_state(pn547_dev, P61_STATE_SPI, true);
#if defined (FEATURE_PN80T) || defined (FEATURE_SN100X)
			if (current_state & P61_STATE_WIRED)
#endif
			{
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid  %ld",
						pn547_dev->nfc_service_pid);
					signal_handler(P61_STATE_SPI_PRIO_END, pn547_dev->nfc_service_pid);
				} else
					NFC_LOG_ERR("invalid nfc service pid.. %ld",
						pn547_dev->nfc_service_pid);
			}
		} else {
			NFC_LOG_ERR("Prio Session End failed 0x%x\n", current_state);
			ret = -EBADRQC; /* Device or resource busy */
		}
		break;
	case 5:
		release_ese_lock(P61_STATE_SPI);
		break;
	case 6:
		/*SPI Service called ISO-RST*/
		if(current_state & P61_STATE_WIRED) {
			return -EPERM; /* Operation not permitted */
		}
		if(current_state & P61_STATE_SPI) {
			p61_update_access_state(pn547_dev, P61_STATE_SPI, false);
		}else if(current_state & P61_STATE_SPI_PRIO) {
			p61_update_access_state(pn547_dev, P61_STATE_SPI_PRIO, false);
		}
#ifdef ISO_RST
		gpio_set_value(pn547_dev->iso_rst_gpio, 0);
		msleep(50);
		gpio_set_value(pn547_dev->iso_rst_gpio, 1);
		msleep(50);
		NFC_LOG_INFO("%s ISO RESET from SPI DONE\n", __func__);
#endif
		break;
	default:
		NFC_LOG_ERR("bad ese pwr arg %lu\n", arg);
		ret = -EBADRQC; /* Invalid request code */
	}

	return ret;
}

static int pn547_p61_set_wired_access(struct pn547_dev *pdev, unsigned long arg)
{
	enum p61_access_state current_state;
	int ret = 0;

	p61_get_access_state(pn547_dev, &current_state);
	NFC_LOG_INFO("cur=0x%x\n", current_state);
	switch (arg) {
	case 0: /*else if (arg == 0)*/
		NFC_LOG_INFO("disabling\n");
		if (current_state & P61_STATE_WIRED) {
			p61_update_access_state(pn547_dev, P61_STATE_WIRED, false);
#if !defined (FEATURE_PN80T) && !defined (FEATURE_SN100X)
			if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0) {
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_DWP_SVDD_SYNC_START);
				gpio_set_value(pn547_dev->ese_pwr_req, 0);
				msleep(60);
				svdd_sync_onoff(pn547_dev->nfc_service_pid,
					P61_STATE_DWP_SVDD_SYNC_END);
			}
#endif
		} else {
			NFC_LOG_ERR("failed, current_state = %x\n",
				pn547_dev->p61_current_state);
			ret = -EPERM; /* Operation not permitted */
		}
		break;
	case 1: /*	if (arg == 1)*/
		if (current_state) {
			NFC_LOG_INFO("enabling\n");
			p61_update_access_state(pn547_dev, P61_STATE_WIRED, true);
			if (current_state & P61_STATE_SPI_PRIO) {
				if (pn547_dev->nfc_service_pid) {
					NFC_LOG_INFO("nfc service pid  %ld",
						pn547_dev->nfc_service_pid);
					signal_handler(P61_STATE_SPI_PRIO, pn547_dev->nfc_service_pid);
				} else {
					NFC_LOG_INFO("invalid nfc service pid.. %ld",
						pn547_dev->nfc_service_pid);
				}
			}
#if !defined (FEATURE_PN80T) && !defined (FEATURE_SN100X)
			if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0) {
				gpio_set_value(pn547_dev->ese_pwr_req, 1);
				usleep_range(10000, 10100);
			}
#endif
		} else {
			NFC_LOG_ERR("enabling failed\n");
			ret = -EBUSY; /* Device or resource busy */
		}
		break;
	case 2: /*	else if(arg == 2)*/
		NFC_LOG_INFO("P61 ESE POWER REQ LOW\n");
#if !defined (FEATURE_PN80T) && !defined (FEATURE_SN100X)
		svdd_sync_onoff(pn547_dev->nfc_service_pid,
			P61_STATE_DWP_SVDD_SYNC_START);
		gpio_set_value(pn547_dev->ese_pwr_req, 0);
		msleep(60);
		svdd_sync_onoff(pn547_dev->nfc_service_pid, P61_STATE_DWP_SVDD_SYNC_END);
#endif
		break;
	case 3: /*	else if(arg == 3)*/
		NFC_LOG_INFO("P61 ESE POWER REQ HIGH\n");
#if !defined (FEATURE_PN80T) && !defined (FEATURE_SN100X)
		gpio_set_value(pn547_dev->ese_pwr_req, 1);
		usleep_range(10000, 10100);
#endif
		break;
	case 4: /*else if(arg == 4)*/
		release_ese_lock(P61_STATE_WIRED);
		break;
	default: /*else*/
		NFC_LOG_INFO("bad arg %lu\n", arg);
		ret = -EBADRQC; /* Invalid request code */
	}

	return ret;
}

int get_ese_lock(enum p61_access_state  p61_current_state, int timeout)
{
	unsigned long tempJ = msecs_to_jiffies(timeout);

	NFC_LOG_INFO("enter p61_current_state=0x%x, timeout=%d, jiffies=%lu\n",
		p61_current_state, timeout, tempJ);
	reinit_completion(&pn547_dev->ese_comp);

	if (p61_trans_acc_on) {
		if (!wait_for_completion_timeout(&pn547_dev->ese_comp, tempJ)) {
			NFC_LOG_ERR("timeout p61_current_state = %d\n", p61_current_state);
			return -EBUSY;
		}
	}

	p61_trans_acc_on = 1;
	NFC_LOG_INFO("exit p61_trans_acc_on =%d, timeout = %d\n",
		p61_trans_acc_on, timeout);
	return 0;
}
EXPORT_SYMBOL(get_ese_lock);

static void release_ese_lock(enum p61_access_state  p61_current_state)
{
	NFC_LOG_INFO("enter p61_current_state = (0x%x)\n",
			p61_current_state);
	p61_trans_acc_on = 0;
	complete(&pn547_dev->ese_comp);
	NFC_LOG_INFO("p61_trans_acc_on =%d exit\n", p61_trans_acc_on);
}

#if defined (FEATURE_PN80T) || defined (FEATURE_SN100X)
static int set_jcop_download_state(unsigned long arg)
{
	enum p61_access_state current_state = P61_STATE_INVALID;
	int ret = 0;

	p61_get_access_state(pn547_dev, &current_state);
	NFC_LOG_INFO("PN547_SET_DWNLD_STATUS:JCOP Dwnld state arg = %ld\n", arg);
	if (arg == JCP_DWNLD_INIT) {
		if (pn547_dev->nfc_service_pid) {
			NFC_LOG_INFO("nfc service pid ---- %ld\n",
				pn547_dev->nfc_service_pid);
			signal_handler(JCP_DWNLD_INIT, pn547_dev->nfc_service_pid);
		} else {
			if (current_state & P61_STATE_JCP_DWNLD)
				ret = -EINVAL;
			else
				p61_update_access_state(pn547_dev,
					P61_STATE_JCP_DWNLD, true);
		}
	} else if (arg == JCP_DWNLD_START) {
		if (current_state & P61_STATE_JCP_DWNLD)
			ret = -EINVAL;
		else
			p61_update_access_state(pn547_dev, P61_STATE_JCP_DWNLD, true);
	} else if (arg == JCP_SPI_DWNLD_COMPLETE) {
		if (pn547_dev->nfc_service_pid) {
			signal_handler(JCP_DWP_DWNLD_COMPLETE,
				pn547_dev->nfc_service_pid);
		}
		p61_update_access_state(pn547_dev, P61_STATE_JCP_DWNLD, false);
	} else if (arg == JCP_DWP_DWNLD_COMPLETE) {
		p61_update_access_state(pn547_dev, P61_STATE_JCP_DWNLD, false);
	} else {
		NFC_LOG_ERR("bad jcop download arg %lu\n", arg);
		return -EBADRQC; /* Invalid request code */
	}
	NFC_LOG_INFO("PN547_SET_DWNLD_STATUS = %x", current_state);

	return ret;
}
#endif
#endif

long pn547_dev_ioctl(struct file *filp,
			   unsigned int cmd, unsigned long arg)
{
	/*struct pn547_dev *pn547_dev = filp->private_data;*/
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	enum p61_access_state current_state;
	int ret = 0;

	/* Free pass autobahn area, not protected. Use it carefullly. START */
	switch (cmd) {
	case P547_GET_ESE_ACCESS:
		return (long)get_ese_lock(P61_STATE_WIRED, arg);
		/*break;*/
	case P547_REL_SVDD_WAIT:
		return (long)release_svdd_wait();
		/*break;*/
	case P547_SET_NFC_SERVICE_PID:
		return (long)set_nfc_pid(arg);
		/*break;*/
	case P547_REL_DWPONOFF_WAIT:
		return (long)release_dwp_onoff();
		/*break;*/
	default:
		break;
	}
	/* Free pass autobahn area, not protected. Use it carefullly. END */

	switch (cmd) {
	case PN547_SET_PWR:
		ret = pn547_set_pwr(pn547_dev, arg);
		break;

	case P61_SET_SPI_PWR:
		ret = pn547_p61_set_spi_pwr(pn547_dev, arg);
		break;

	case P61_GET_PWR_STATUS:
		current_state = P61_STATE_INVALID;
		p61_get_access_state(pn547_dev, &current_state);
		NFC_LOG_INFO("P61_GET_PWR_STATUS  = %x\n", current_state);
		put_user(current_state, (int __user *)arg);
		break;

#if defined (FEATURE_PN80T) || defined (FEATURE_SN100X)
	case PN547_SET_DWNLD_STATUS:
		ret = set_jcop_download_state(arg);
		if (ret < 0)
			NFC_LOG_INFO("set_jcop_download_state failed");
		break;
#endif

	case P61_SET_WIRED_ACCESS:
		ret = pn547_p61_set_wired_access(pn547_dev, arg);
		break;

	default:
		NFC_LOG_ERR("bad ioctl cmd:%x\n", cmd);
		ret = -EINVAL;
	}
	return (long)ret;
#else
	switch (cmd) {
	case PN547_SET_PWR:
		if (arg == 2) {
			/* power on with firmware download (requires hw reset)
			 */
			set_pd(pn547_dev, PN547_NFC_PW_ON);
			gpio_set_value(pn547_dev->firm_gpio, 1);
			usleep_range(4900, 5000);
			set_pd(pn547_dev, PN547_NFC_PW_OFF);
			usleep_range(4900, 5000);
			set_pd(pn547_dev, PN547_NFC_PW_ON);
			usleep_range(4900, 5000);
			if (atomic_read(&pn547_dev->irq_enabled) == 0) {
				atomic_set(&pn547_dev->irq_enabled, 1);
				enable_irq(pn547_dev->client->irq);
				enable_irq_wake(pn547_dev->client->irq);
			}
			NFC_LOG_INFO("power on with firmware, irq=%d\n",
				atomic_read(&pn547_dev->irq_enabled));
		} else if (arg == 1) {
			/* power on */
			gpio_set_value(pn547_dev->firm_gpio, 0);
			set_pd(pn547_dev, PN547_NFC_PW_ON);
			usleep_range(4900, 5000);
			if (atomic_read(&pn547_dev->irq_enabled) == 0) {
				atomic_set(&pn547_dev->irq_enabled, 1);
				enable_irq(pn547_dev->client->irq);
				enable_irq_wake(pn547_dev->client->irq);
			}
			NFC_LOG_INFO("power on, irq=%d\n", atomic_read(&pn547_dev->irq_enabled));
		} else if (arg == 0) {
			/* power off */
			if (atomic_read(&pn547_dev->irq_enabled) == 1) {
				atomic_set(&pn547_dev->irq_enabled, 0);
				disable_irq_wake(pn547_dev->client->irq);
				disable_irq_nosync(pn547_dev->client->irq);
			}
			if (wake_lock_active(&pn547_dev->nfc_clk_wake_lock))
				wake_unlock(&pn547_dev->nfc_clk_wake_lock);
			NFC_LOG_INFO("power off, irq=%d\n", atomic_read(&pn547_dev->irq_enabled));
			gpio_set_value(pn547_dev->firm_gpio, 0);
			set_pd(pn547_dev, PN547_NFC_PW_OFF);
			usleep_range(4900, 5000);
		} else if (arg == 3) {
			NFC_LOG_INFO("Read Cancel\n");
			pn547_dev->cancel_read = true;
			atomic_set(&pn547_dev->read_flag, 1);
			wake_up(&pn547_dev->read_wq);
		} else {
			NFC_LOG_ERR("bad arg %lu\n", arg);
			return -EINVAL;
		}
		break;
	default:
		NFC_LOG_ERR("bad ioctl %u\n", cmd);
		return -EINVAL;
	}
	return 0;
#endif
}
EXPORT_SYMBOL(pn547_dev_ioctl);

static const struct file_operations pn547_dev_fops = {
	.owner = THIS_MODULE,
	.llseek = no_llseek,
	.read = pn547_dev_read,
	.write = pn547_dev_write,
	.open = pn547_dev_open,
	.release = pn547_dev_release,
	.unlocked_ioctl = pn547_dev_ioctl,
};

static int pn547_parse_dt(struct device *dev,
	struct pn547_dev *pdev)
{
	struct device_node *np = dev->of_node;

	pdev->irq_gpio = of_get_named_gpio(np, "pn547,irq-gpio", 0);
	pdev->ven_gpio = of_get_named_gpio(np, "pn547,ven-gpio", 0);
	pdev->firm_gpio = of_get_named_gpio(np, "pn547,firm-gpio", 0);

#ifdef ISO_RST
	pdev->iso_rst_gpio = of_get_named_gpio(np, "pn547,iso-rst-gpio", 0);
#endif
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	pdev->ese_pwr_req = of_get_named_gpio(np, "pn547,pwr_req", 0);
#endif

	if (of_get_property(dev->of_node, "pn547,ldo_control", NULL)) {
		if (of_property_read_string(np, "pn547,nfc_pvdd", &pdev->nfc_pvdd) < 0) {
			NFC_LOG_ERR("parse_dt() get nfc_pvdd error\n");
			pdev->nfc_pvdd = NULL;
		}
	} else {
		pdev->pvdd = of_get_named_gpio(np, "pn547,pvdd-gpio", 0);
		if (pdev->pvdd < 0) {
			NFC_LOG_ERR("pvdd-gpio is not set.");
			pdev->pvdd = 0;
		}
	}

	if (of_get_property(dev->of_node, "pn547,nfc_pm_clk", NULL)) {
		pdev->clk = clk_get(dev, "rf_clk");
		if (IS_ERR(pdev->clk)) {
			NFC_LOG_ERR("Couldn't get rf_clk\n");
		} else {
			NFC_LOG_INFO("got rf_clk\n");
			/* sdm845: if prepare_enable clk, clk always generated*/
			/*clk_prepare_enable(pn547_dev->clk);*/
		}
	}

	if (of_property_read_u32(np, "clkctrl-reg", (u32 *)&pdev->clkctrl_addr))
		NFC_LOG_ERR("%s: no clkctrl-reg at dt file\n", __func__);

	if (of_find_property(np, "pn547,nfc_ap_clk", NULL)) 
		pdev->clk_req_gpio = of_get_named_gpio(np, "pn547,clk_req-gpio", 0);

	if (of_find_property(np, "pn547,nfc_clkreq_int", NULL)) 
		pdev->clk_req_gpio = of_get_named_gpio(np, "pn547,nfc_clkreq_int", 0);


	NFC_LOG_INFO("irq : %d, ven : %d, firm : %d\n", pdev->irq_gpio,
		pdev->ven_gpio, pdev->firm_gpio);
	return 0;
}

static int pn547_regulator_onoff(struct device *dev,
		struct pn547_dev *pdev, int onoff)
{
	int rc = 0;
	struct regulator *regulator_nfc_pvdd;

	regulator_nfc_pvdd = regulator_get(NULL, pdev->nfc_pvdd);
	if (IS_ERR(regulator_nfc_pvdd) || regulator_nfc_pvdd == NULL) {
		NFC_LOG_ERR("nfc_pvdd regulator_get fail\n");
		return -ENODEV;
	}

	NFC_LOG_INFO("regulator onoff = %d\n", onoff);
	if (onoff == NFC_I2C_LDO_ON) {
#ifdef FEATURE_SN100X
		rc = regulator_set_load(regulator_nfc_pvdd, 300000);
		if (rc) {
			NFC_LOG_ERR("regulator_uwb_vdd set_load failed, rc=%d\n", rc);
			goto done;
		}
#endif
		rc = regulator_enable(regulator_nfc_pvdd);
		if (rc) {
			NFC_LOG_ERR("regulator enable failed, rc=%d\n", rc);
			goto done;
		}
	} else {
		rc = regulator_disable(regulator_nfc_pvdd);
		if (rc) {
			NFC_LOG_ERR("regulator disable failed, rc=%d\n", rc);
			goto done;
		}
	}

	NFC_LOG_INFO("success\n");
done:
	regulator_put(regulator_nfc_pvdd);
	return rc;
}

#ifdef FEATURE_NFC_TEST
static ssize_t test_show(struct class *class,
		struct class_attribute *attr, char *buf)
{
	int size;
	int ret = 0;
	int count = 4;
	char tmp[128] = {0x20, 0x00, 0x01, 0x00, };
	int retry;
	bool old_ven, old_irq;
	int old_read_value;

	NFC_LOG_INFO("start\n");

	old_ven = pn547_dev->nfc_ven_enabled;
	NFC_LOG_INFO("old_ven is %d\n", old_ven);
	retry = 20;
	if (!old_ven) {	/* if nfc status is off */
		pn547_dev->nfc_ven_enabled = true;

		if (pn547_dev->spi_ven_enabled == false)
			set_pd(pn547_dev, PN547_NFC_PW_ON);
		usleep_range(4900, 5000);
	} else {	/* if nfc status is on */
		/*wake up device*/
		set_pd(pn547_dev, PN547_NFC_PW_OFF);
		usleep_range(4900, 5000);
		set_pd(pn547_dev, PN547_NFC_PW_ON);
		usleep_range(4900, 5000);
		//intercept i2c_master_recv
		pn547_dev->cancel_read = 1;
		atomic_set(&pn547_dev->read_flag, 1);
	}
	wake_up_all(&pn547_dev->read_wq);
	while (!mutex_trylock(&pn547_dev->read_mutex) && --retry)
		usleep_range(15, 20);

	if (!retry) {
		NFC_LOG_ERR("mutex_trylock failed. check pn547_dev_read()\n");
		ret = sprintf(buf, "test failed : device in use\n");
		goto fail_lock;
	}

	NFC_LOG_INFO("read_mutex locked. retry : %d\n", retry);

	atomic_set(&pn547_dev->read_flag, 0);
	pn547_dev->cancel_read = 0;
	old_irq = atomic_read(&pn547_dev->irq_enabled);
	NFC_LOG_INFO("old_irq is %d\n", old_irq);
	if (!old_irq) {
		atomic_set(&pn547_dev->irq_enabled, 1);
		enable_irq(pn547_dev->client->irq);
		enable_irq(pn547_dev->clk_req_irq);
		enable_irq_wake(pn547_dev->client->irq);
		enable_irq_wake(pn547_dev->clk_req_irq);
		NFC_LOG_INFO("power on, irq=%d\n", atomic_read(&pn547_dev->irq_enabled));
	}
	retry = 2;
	do {
		ret = i2c_master_send(pn547_dev->client, tmp, count);
		if (count == ret)
			break;

		NFC_LOG_INFO("i2c_master_send error. ret:%d, retry:%d\n", ret, retry);
		usleep_range(6000, 10000); /* Retry, chip was in standby */
	} while (retry--);

	if (ret != count) {
		NFC_LOG_ERR("failed. count error. send=%d, recv=%d\n", count, ret);
		ret = 0;
		goto fail;
	}

	NFC_LOG_INFO("send success. returned: %d\n", ret);

	//wait for reply
#if NFC_DEBUG
	NFC_LOG_INFO("wait_event_interruptible : in\n");
#endif
	ret = 0;
	old_read_value = atomic_read(&pn547_dev->read_flag);
	NFC_LOG_INFO("read_flag %d, cancel_read %d", old_read_value,
		pn547_dev->cancel_read);
	if (!old_read_value) {
		ret = wait_event_interruptible(pn547_dev->read_wq,
			atomic_read(&pn547_dev->read_flag));
	}

#if NFC_DEBUG
	NFC_LOG_DBG("h\n");
#endif

	if (pn547_dev->cancel_read) {
		pn547_dev->cancel_read = false;
		ret = 0;
		//todo : old_ven and old_irq rollback needed
		goto fail;
	}

	if (ret) {
		ret = 0;
		goto fail;
	}

	/* Read data */
	count = 6;
	ret = i2c_master_recv(pn547_dev->client, tmp, count);
#if NFC_DEBUG
	NFC_LOG_INFO("i2c_master_recv\n");
#endif
	mutex_unlock(&pn547_dev->read_mutex);

	if (!old_ven) {	/* if nfc status is off */
		if (pn547_dev->spi_ven_enabled == false)
			set_pd(pn547_dev, PN547_NFC_PW_OFF);
		usleep_range(4900, 5000);
		pn547_dev->nfc_ven_enabled = false;
	}
	if (!old_irq) {
		atomic_set(&pn547_dev->irq_enabled, 0);
		disable_irq_wake(pn547_dev->client->irq);
		disable_irq_wake(pn547_dev->clk_req_irq);
		disable_irq_nosync(pn547_dev->clk_req_irq);
		disable_irq_nosync(pn547_dev->client->irq);
	}
	if (ret < 0 || ret > count) {
		NFC_LOG_ERR("i2c_master_recv returned %d. count : %d\n",
			ret, count);
		return 0;
	}

	size = sprintf(buf, "test completed!! size: %d, data: %X %X %X %X %X %X\n",
		ret, tmp[0], tmp[1], tmp[2], tmp[3], tmp[4], tmp[5]);
	NFC_LOG_INFO("recv success.\n");
	usleep_range(10000, 10100);

	return size;

fail:
	mutex_unlock(&pn547_dev->read_mutex);
fail_lock:
	return ret;
}

static ssize_t test_store(struct class *class,
	struct class_attribute *attr, const char *buf, size_t size)
{
	return size;
}

static CLASS_ATTR_RW(test);
#endif

static ssize_t nfc_support_show(struct class *class,
		struct class_attribute *attr, char *buf)
{
	NFC_LOG_INFO("\n");
	return 0;
}
static CLASS_ATTR_RO(nfc_support);

static int pn547_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
	int ret;
	int err;
	int addr;
	char tmp[4] = {0x20, 0x00, 0x01, 0x01};
	int addrcnt;
	struct device_node *np = client->dev.of_node;
	int nfc_support = 0;
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	int ese_support = 0;
#endif
	struct property *prop;
#ifdef FEATURE_NFC_TEST
	struct class *nfc_class;
#endif

	/*separate NFC / non NFC using GPIO*/
	prop = of_find_property(np, "pn547,check_nfc", NULL);
	if (prop) {
		nfc_support = gpio_get_value(of_get_named_gpio(np, "pn547,check_nfc", 0));
		if (nfc_support > 0) {
			NFC_LOG_INFO("%s : nfc support model : %d\n", __func__, nfc_support);
		}else{
			NFC_LOG_INFO("%s : nfc not support model : %d\n", __func__, nfc_support);
			return -ENXIO;
		}
	}

	NFC_LOG_INFO("entered\n");

	nfc_logger_init();

	if (client->dev.of_node) {
		pn547_dev = devm_kzalloc(&client->dev, sizeof(struct pn547_dev), GFP_KERNEL);
		if (!pn547_dev)
			return -ENOMEM;

		err = pn547_parse_dt(&client->dev, pn547_dev);
		if (err)
			return err;
	} else {
		NFC_LOG_ERR("no dts\n");
		return -ENODEV;
	}

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
		NFC_LOG_ERR("need I2C_FUNC_I2C\n");
		return -ENODEV;
	}

	ret = gpio_request(pn547_dev->irq_gpio, "nfc_irq");
	if (ret)
		return -ENODEV;
	ret = gpio_request(pn547_dev->ven_gpio, "nfc_ven");
	if (ret)
		goto err_ven;
	ret = gpio_request(pn547_dev->firm_gpio, "nfc_firm");
	if (ret)
		goto err_firm;
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	ret = gpio_request(pn547_dev->ese_pwr_req, "ese_pwr");
	if (ret)
		goto err_ese;
#endif
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	ret = gpio_request(pn547_dev->clk_req_gpio, "nfc_clk_req");
	if (ret)
		goto err_clk_req;
#endif
#ifdef ISO_RST
	ret = gpio_request(pn547_dev->iso_rst_gpio, "iso_rst");
	if (ret)
		goto err_iso_rst;
#endif

	if (pn547_dev->clkctrl_addr != 0) {
		unsigned int val = 0;

		pn547_dev->clkctrl = ioremap_nocache(pn547_dev->clkctrl_addr, 0x4);
		if (!pn547_dev->clkctrl) {
			dev_err(&client->dev, "cannot remap register\n");
			ret = -ENXIO;
			goto err_ioremap;
		}
		val = readl(pn547_dev->clkctrl);
		val |= (PN547_NFC_CLKCTRL_REQ_POLA | PN547_NFC_CLKCTRL_CLK_ENABLE);
		writel(val, pn547_dev->clkctrl);
		NFC_LOG_INFO("%s: clkctrl=0x%X\n", __func__, val);
	}

	if (of_get_property(np, "pn547,ldo_control", NULL)) {
		ret = pn547_regulator_onoff(&client->dev, pn547_dev, NFC_I2C_LDO_ON);
		if (ret < 0)
			NFC_LOG_ERR("%s pn547 regulator_on fail err = %d\n", __func__, ret);
		usleep_range(1000, 1100);
	} else {
		ret = of_get_named_gpio(client->dev.of_node, "pn547,pvdd-gpio", 0);
		if (ret < 0) {
			NFC_LOG_ERR("%s : pvdd-gpio is not set", __func__);
		} else {
			pn547_dev->pvdd = ret;

			ret = gpio_request(pn547_dev->pvdd, "pvdd-gpio");
			if (ret) {
				dev_err(&client->dev, "%s failed to get gpio pvdd-gpio\n", __func__);
				gpio_free(pn547_dev->pvdd);
				goto err_pvdd;
			}
			gpio_direction_output(pn547_dev->pvdd, 1);
			NFC_LOG_INFO("%s pvdd-gpio:%d",__func__, pn547_dev->pvdd);
		}
	}

#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	pn547_dev->nfc_clock = msm_xo_get(MSM_XO_TCXO_A1, "nfc");
	if (IS_ERR(pn547_dev->nfc_clock)) {
		ret = PTR_ERR(pn547_dev->nfc_clock);
		NFC_LOG_ERR("Couldn't get TCXO_A1 vote for NFC (%d)\n", ret);
		ret = -ENODEV;
		goto err_get_clock;
	}
	pn547_dev->clock_state = false;
#endif

	client->irq = gpio_to_irq(pn547_dev->irq_gpio);
	NFC_LOG_INFO("IRQ num %d\n", client->irq);

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	pn547_dev->p61_current_state = P61_STATE_IDLE;
	pn547_dev->nfc_ven_enabled = false;
	pn547_dev->spi_ven_enabled = false;
#endif
	pn547_dev->client = client;
#ifdef ISO_RST
	pn547_dev->iso_rst_gpio = false;
#endif
	/* init mutex and queues */
	init_waitqueue_head(&pn547_dev->read_wq);
	mutex_init(&pn547_dev->read_mutex);

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	p61_trans_acc_on = 0;
	init_completion(&pn547_dev->ese_comp);
	init_completion(&pn547_dev->svdd_sync_comp);
	init_completion(&pn547_dev->dwp_onoff_comp);
	sema_init(&dwp_onoff_release_sema, 0);
#endif

	pn547_dev->pn547_device.minor = MISC_DYNAMIC_MINOR;
	pn547_dev->pn547_device.name = "pn547";
	pn547_dev->pn547_device.fops = &pn547_dev_fops;

	ret = misc_register(&pn547_dev->pn547_device);
	if (ret) {
		NFC_LOG_ERR("misc_register failed\n");
		goto err_misc_register;
	}

	/* request irq.  the irq is set whenever the chip has data available
	 * for reading.  it is cleared when all data has been read.
	 */
	NFC_LOG_INFO("requesting IRQ %d\n", client->irq);
	gpio_direction_input(pn547_dev->irq_gpio);
	set_pd(pn547_dev, PN547_NFC_PW_OFF);
	gpio_direction_output(pn547_dev->firm_gpio, 0);

#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	prop = of_find_property(np, "pn547,check_ese", NULL);
	if (prop) {
		ese_support = gpio_get_value(of_get_named_gpio(np, "pn547,check_ese", 0));
		if (ese_support > 0) {
			gpio_direction_output(pn547_dev->ese_pwr_req, 0);
			NFC_LOG_INFO("ESE pwr req off\n");
		}
	} else {
		gpio_direction_output(pn547_dev->ese_pwr_req, 0);
		NFC_LOG_INFO("ese pwr req off\n");
	}
#endif

#if defined(CONFIG_NFC_PN547_CLOCK_REQUEST)
	gpio_direction_input(pn547_dev->clk_req_gpio);
#endif
#ifdef ISO_RST
	gpio_direction_output(pn547_dev->iso_rst_gpio, 0);
#endif
	i2c_set_clientdata(client, pn547_dev);
	wake_lock_init(&pn547_dev->nfc_wake_lock, WAKE_LOCK_SUSPEND, "nfc_wake_lock");
	wake_lock_init(&pn547_dev->nfc_clk_wake_lock, WAKE_LOCK_SUSPEND, "nfc_clk_wake_lock");
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	pn547_dev->wq_clock = create_singlethread_workqueue("nfc_wq");
	if (!pn547_dev->wq_clock) {
		ret = -ENOMEM;
		NFC_LOG_ERR("could not create workqueue\n");
		goto err_create_workqueue;
	}
	INIT_WORK(&pn547_dev->work_nfc_clock, nfc_work_func_clock);
#endif
	ret = request_irq(client->irq, pn547_dev_irq_handler, IRQF_TRIGGER_RISING,
		"pn547", pn547_dev);
	if (ret) {
		NFC_LOG_ERR("request_irq failed\n");
		goto err_request_irq_failed;
	}
	disable_irq_nosync(pn547_dev->client->irq);
	atomic_set(&pn547_dev->irq_enabled, 0);

#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	ret = request_irq(pn547_dev->clk_req_irq, pn547_dev_clk_req_irq_handler,
		IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
		"pn547_clk_req", pn547_dev);
	if (ret) {
		NFC_LOG_ERR("request_irq(clk_req) failed\n");
		goto err_request_irq_failed;
	}

	enable_irq_wake(pn547_dev->clk_req_irq);
#else

	if (of_get_property(np, "pn547,nfc_ap_clk", NULL)) {
		gpio_direction_input(pn547_dev->clk_req_gpio);
		pn547_dev->clk_req_irq = gpio_to_irq(pn547_dev->clk_req_gpio);
		ret = request_threaded_irq(pn547_dev->clk_req_irq, NULL, pn547_nfc_clk_irq,
				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "nfc_clk", pn547_dev);
		if (ret < 0) {
			dev_err(&client->dev, "failed to register IRQ handler\n");
			goto err_request_irq_failed;
		} else
			enable_irq_wake(pn547_dev->clk_req_irq);

		pn547_dev->nfc_clock = clk_get(&client->dev, "oscclk_nfc");
		if (IS_ERR(pn547_dev->nfc_clock)) {
			NFC_LOG_ERR("probe() clk not found\n");
			goto err_clk_get_failed;
		}

	}
#endif

	set_pd(pn547_dev, PN547_NFC_PW_ON);
	gpio_set_value(pn547_dev->firm_gpio, 1); /* add firmware pin */
	usleep_range(4900, 5000);
	set_pd(pn547_dev, PN547_NFC_PW_OFF);
	usleep_range(4900, 5000);
	set_pd(pn547_dev, PN547_NFC_PW_ON);
	usleep_range(4900, 5000);

	for (addr = 0x2B; addr > 0x27; addr--) {
		client->addr = addr;
		addrcnt = 2;
		do {
			ret = i2c_master_send(client, tmp, 4);
			if (ret > 0) {
				NFC_LOG_INFO("i2c addr(0x%X), ret(%d)\n",
					client->addr, ret);
				pn547_dev->i2c_probe = ret;
				break;
			}
		} while (addrcnt--);
		if (ret > 0)
			break;
	}

	if (ret <= 0) {
		NFC_LOG_INFO("ret(%d), i2c_probe(%d)\n", ret, pn547_dev->i2c_probe);
		client->addr = 0x2B;
	}
	set_pd(pn547_dev, PN547_NFC_PW_OFF);
	gpio_set_value(pn547_dev->firm_gpio, 0); /* add */

#ifdef VEN_ALWAYS_ON
	usleep_range(4900, 5000);
	gpio_set_value(pn547_dev->ven_gpio, 1);
#endif

	if (ret < 0)
		NFC_LOG_ERR("fail to get i2c addr\n");
	else
		NFC_LOG_INFO("success, i2c_probe(%d)\n", pn547_dev->i2c_probe);

#ifdef FEATURE_NFC_TEST
	nfc_class = class_create(THIS_MODULE, "nfc_test");
	if (IS_ERR(&nfc_class)) {
		NFC_LOG_ERR("failed to create nfc class\n");
	} else {
		ret = class_create_file(nfc_class, &class_attr_test);
		if (ret)
			NFC_LOG_ERR("failed to create file\n");
	}
#endif

	nfc_class = class_create(THIS_MODULE, "nfc"); 
	if (IS_ERR(&nfc_class)) { 
		NFC_LOG_ERR("failed to create nfc class\n"); 
	} else { 
		ret = class_create_file(nfc_class, &class_attr_nfc_support); 
		if (ret) 
			NFC_LOG_ERR("failed to create nfc_support file\n"); 
	} 

	pn547_dev->r_buf = kzalloc(sizeof(char) * MAX_BUFFER_SIZE, GFP_KERNEL);
	if (pn547_dev->r_buf == NULL) {
		NFC_LOG_ERR("failed to allocate for i2c r_buffer\n");
		ret = -ENOMEM;
		goto err_r_buf_alloc_failed;
	}

	pn547_dev->w_buf = kzalloc(sizeof(char) * MAX_BUFFER_SIZE, GFP_KERNEL);
	if (pn547_dev->w_buf == NULL) {
		NFC_LOG_ERR("failed to allocate for i2c w_buffer\n");
		ret = -ENOMEM;
		goto err_w_buf_alloc_failed;
	}

	return 0;

err_w_buf_alloc_failed:
	kfree(pn547_dev->r_buf);
err_r_buf_alloc_failed:
err_clk_get_failed:
	if (of_get_property(np, "pn547,nfc_ap_clk", NULL))
		clk_put(pn547_dev->nfc_clock);
err_request_irq_failed:
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
err_create_workqueue:
#endif
	misc_deregister(&pn547_dev->pn547_device);
	wake_lock_destroy(&pn547_dev->nfc_wake_lock);
err_misc_register:
	mutex_destroy(&pn547_dev->read_mutex);
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	msm_xo_put(pn547_dev->nfc_clock);
err_get_clock:
#endif
#if defined(CONFIG_NFC_PN547_CLOCK_REQUEST)
	gpio_free(pn547_dev->clk_req_gpio);
err_clk_req:
#endif
err_ioremap:
	if(!pn547_dev->clkctrl)
		iounmap(pn547_dev->clkctrl);
err_pvdd:
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	gpio_free(pn547_dev->ese_pwr_req);
err_ese:
#endif
	gpio_free(pn547_dev->firm_gpio);
err_firm:
	gpio_free(pn547_dev->ven_gpio);
err_ven:
	gpio_free(pn547_dev->irq_gpio);
#ifdef ISO_RST
err_iso_rst:
	gpio_free(pn547_dev->iso_rst_gpio);
#endif
	devm_kfree(&client->dev, pn547_dev);
	NFC_LOG_ERR("failed!\n");
	return ret;
}

static int pn547_remove(struct i2c_client *client)
{
	struct pn547_dev *pn547_dev;

	NFC_LOG_INFO("removing pn547 driver\n");
	pn547_dev = i2c_get_clientdata(client);

	wake_lock_destroy(&pn547_dev->nfc_wake_lock);
	free_irq(client->irq, pn547_dev);
	misc_deregister(&pn547_dev->pn547_device);
	mutex_destroy(&pn547_dev->read_mutex);
	gpio_free(pn547_dev->irq_gpio);
	gpio_free(pn547_dev->ven_gpio);
	gpio_free(pn547_dev->firm_gpio);
#ifdef CONFIG_NFC_PN547_CLOCK_REQUEST
	gpio_free(pn547_dev->clk_req_gpio);
	msm_xo_put(pn547_dev->nfc_clock);
#endif
#ifdef ISO_RST
    gpio_free(pn547_dev->iso_rst_gpio);
#endif
#ifdef CONFIG_NFC_PN547_ESE_SUPPORT
	pn547_dev->p61_current_state = P61_STATE_INVALID;
	pn547_dev->nfc_ven_enabled = false;
	pn547_dev->spi_ven_enabled = false;
#endif

	kfree(pn547_dev->r_buf);
	kfree(pn547_dev->w_buf);
	kfree(pn547_dev);
	return 0;
}

static const struct i2c_device_id pn547_id[] = {
	{"pn547", 0},
	{}
};

static const struct of_device_id nfc_match_table[] = {
	{ .compatible = "pn547",},
	{},
};

static struct i2c_driver pn547_driver = {
	.id_table = pn547_id,
	.probe = pn547_probe,
	.remove = pn547_remove,
	.driver = {
		.owner = THIS_MODULE,
		.name = "pn547",
		.of_match_table = nfc_match_table,
		.suppress_bind_attrs = true,
	},
};

/*
 * module load/unload record keeping
 */
static int __init pn547_dev_init(void)
{
	NFC_LOG_INFO("Loading pn547 driver\n");
	if (lpcharge) {
		NFC_LOG_ERR("LPM, Do not load nfc driver\n");
		return 0;
	} else
		return i2c_add_driver(&pn547_driver);
}

module_init(pn547_dev_init);

static void __exit pn547_dev_exit(void)
{
	NFC_LOG_INFO("Unloading pn547 driver\n");
	i2c_del_driver(&pn547_driver);
}

module_exit(pn547_dev_exit);

MODULE_AUTHOR("Sylvain Fonteneau");
MODULE_DESCRIPTION("NFC PN547 driver");
MODULE_LICENSE("GPL");