| /* |
| * Copyright 2003-2013 Broadcom Corporation. |
| * All Rights Reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the Broadcom |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/init.h> |
| |
| #include <asm/asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/stackframe.h> |
| #include <asm/asmmacro.h> |
| #include <asm/addrspace.h> |
| |
| #include <asm/netlogic/common.h> |
| |
| #include <asm/netlogic/xlp-hal/iomap.h> |
| #include <asm/netlogic/xlp-hal/xlp.h> |
| #include <asm/netlogic/xlp-hal/sys.h> |
| #include <asm/netlogic/xlp-hal/cpucontrol.h> |
| |
| #define CP0_EBASE $15 |
| #define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ |
| XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ |
| SYS_CPU_NONCOHERENT_MODE * 4 |
| |
| /* Enable XLP features and workarounds in the LSU */ |
| .macro xlp_config_lsu |
| li t0, LSU_DEFEATURE |
| mfcr t1, t0 |
| |
| lui t2, 0xc080 /* SUE, Enable Unaligned Access, L2HPE */ |
| or t1, t1, t2 |
| mtcr t1, t0 |
| |
| li t0, ICU_DEFEATURE |
| mfcr t1, t0 |
| ori t1, 0x1000 /* Enable Icache partitioning */ |
| mtcr t1, t0 |
| |
| li t0, SCHED_DEFEATURE |
| lui t1, 0x0100 /* Disable BRU accepting ALU ops */ |
| mtcr t1, t0 |
| .endm |
| |
| /* |
| * Low level flush for L1D cache on XLP, the normal cache ops does |
| * not do the complete and correct cache flush. |
| */ |
| .macro xlp_flush_l1_dcache |
| li t0, LSU_DEBUG_DATA0 |
| li t1, LSU_DEBUG_ADDR |
| li t2, 0 /* index */ |
| li t3, 0x1000 /* loop count */ |
| 1: |
| sll v0, t2, 5 |
| mtcr zero, t0 |
| ori v1, v0, 0x3 /* way0 | write_enable | write_active */ |
| mtcr v1, t1 |
| 2: |
| mfcr v1, t1 |
| andi v1, 0x1 /* wait for write_active == 0 */ |
| bnez v1, 2b |
| nop |
| mtcr zero, t0 |
| ori v1, v0, 0x7 /* way1 | write_enable | write_active */ |
| mtcr v1, t1 |
| 3: |
| mfcr v1, t1 |
| andi v1, 0x1 /* wait for write_active == 0 */ |
| bnez v1, 3b |
| nop |
| addi t2, 1 |
| bne t3, t2, 1b |
| nop |
| .endm |
| |
| /* |
| * nlm_reset_entry will be copied to the reset entry point for |
| * XLR and XLP. The XLP cores start here when they are woken up. This |
| * is also the NMI entry point. |
| * |
| * We use scratch reg 6/7 to save k0/k1 and check for NMI first. |
| * |
| * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS |
| * location, this will have the thread mask (used when core is woken up) |
| * and the current NMI handler in case we reached here for an NMI. |
| * |
| * When a core or thread is newly woken up, it marks itself ready and |
| * loops in a 'wait'. When the CPU really needs waking up, we send an NMI |
| * IPI to it, with the NMI handler set to prom_boot_secondary_cpus |
| */ |
| .set noreorder |
| .set noat |
| .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ |
| |
| FEXPORT(nlm_reset_entry) |
| dmtc0 k0, $22, 6 |
| dmtc0 k1, $22, 7 |
| mfc0 k0, CP0_STATUS |
| li k1, 0x80000 |
| and k1, k0, k1 |
| beqz k1, 1f /* go to real reset entry */ |
| nop |
| li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ |
| ld k0, BOOT_NMI_HANDLER(k1) |
| jr k0 |
| nop |
| |
| 1: /* Entry point on core wakeup */ |
| mfc0 t0, CP0_EBASE, 1 |
| mfc0 t1, CP0_EBASE, 1 |
| srl t1, 5 |
| andi t1, 0x3 /* t1 <- node */ |
| li t2, 0x40000 |
| mul t3, t2, t1 /* t3 = node * 0x40000 */ |
| srl t0, t0, 2 |
| and t0, t0, 0x7 /* t0 <- core */ |
| li t1, 0x1 |
| sll t0, t1, t0 |
| nor t0, t0, zero /* t0 <- ~(1 << core) */ |
| li t2, SYS_CPU_COHERENT_BASE(0) |
| add t2, t2, t3 /* t2 <- SYS offset for node */ |
| lw t1, 0(t2) |
| and t1, t1, t0 |
| sw t1, 0(t2) |
| |
| /* read back to ensure complete */ |
| lw t1, 0(t2) |
| sync |
| |
| /* Configure LSU on Non-0 Cores. */ |
| xlp_config_lsu |
| /* FALL THROUGH */ |
| |
| /* |
| * Wake up sibling threads from the initial thread in |
| * a core. |
| */ |
| EXPORT(nlm_boot_siblings) |
| /* core L1D flush before enable threads */ |
| xlp_flush_l1_dcache |
| /* Enable hw threads by writing to MAP_THREADMODE of the core */ |
| li t0, CKSEG1ADDR(RESET_DATA_PHYS) |
| lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ |
| li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) |
| mfcr t2, t0 |
| or t2, t2, t1 |
| mtcr t2, t0 |
| |
| /* |
| * The new hardware thread starts at the next instruction |
| * For all the cases other than core 0 thread 0, we will |
| * jump to the secondary wait function. |
| */ |
| mfc0 v0, CP0_EBASE, 1 |
| andi v0, 0x3ff /* v0 <- node/core */ |
| |
| beqz v0, 4f /* boot cpu (cpuid == 0)? */ |
| nop |
| |
| /* setup status reg */ |
| move t1, zero |
| #ifdef CONFIG_64BIT |
| ori t1, ST0_KX |
| #endif |
| mtc0 t1, CP0_STATUS |
| |
| /* mark CPU ready, careful here, previous mtcr trashed registers */ |
| li t3, CKSEG1ADDR(RESET_DATA_PHYS) |
| ADDIU t1, t3, BOOT_CPU_READY |
| sll v1, v0, 2 |
| PTR_ADDU t1, v1 |
| li t2, 1 |
| sw t2, 0(t1) |
| /* Wait until NMI hits */ |
| 3: wait |
| b 3b |
| nop |
| |
| /* |
| * For the boot CPU, we have to restore registers and |
| * return |
| */ |
| 4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ |
| li t1, 0xfadebeef |
| dmtc0 t1, $4, 2 /* restore SP from UserLocal */ |
| PTR_SUBU sp, t0, PT_SIZE |
| RESTORE_ALL |
| jr ra |
| nop |
| EXPORT(nlm_reset_entry_end) |
| |
| LEAF(nlm_init_boot_cpu) |
| #ifdef CONFIG_CPU_XLP |
| xlp_config_lsu |
| #endif |
| jr ra |
| nop |
| END(nlm_init_boot_cpu) |