nl80211: export hardware bitrate/channel capabilities
This makes nl80211 export the hardware bitrate/channel capabilities
as registered in a wiphy.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e3a214f..b123f58 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -98,6 +98,13 @@
struct cfg80211_registered_device *dev)
{
void *hdr;
+ struct nlattr *nl_bands, *nl_band;
+ struct nlattr *nl_freqs, *nl_freq;
+ struct nlattr *nl_rates, *nl_rate;
+ enum ieee80211_band band;
+ struct ieee80211_channel *chan;
+ struct ieee80211_rate *rate;
+ int i;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_WIPHY);
if (!hdr)
@@ -105,6 +112,73 @@
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->idx);
NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
+
+ nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
+ if (!nl_bands)
+ goto nla_put_failure;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!dev->wiphy.bands[band])
+ continue;
+
+ nl_band = nla_nest_start(msg, band);
+ if (!nl_band)
+ goto nla_put_failure;
+
+ /* add frequencies */
+ nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
+ if (!nl_freqs)
+ goto nla_put_failure;
+
+ for (i = 0; i < dev->wiphy.bands[band]->n_channels; i++) {
+ nl_freq = nla_nest_start(msg, i);
+ if (!nl_freq)
+ goto nla_put_failure;
+
+ chan = &dev->wiphy.bands[band]->channels[i];
+ NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
+ chan->center_freq);
+
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
+ if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+ NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
+ if (chan->flags & IEEE80211_CHAN_RADAR)
+ NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
+
+ nla_nest_end(msg, nl_freq);
+ }
+
+ nla_nest_end(msg, nl_freqs);
+
+ /* add bitrates */
+ nl_rates = nla_nest_start(msg, NL80211_BAND_ATTR_RATES);
+ if (!nl_rates)
+ goto nla_put_failure;
+
+ for (i = 0; i < dev->wiphy.bands[band]->n_bitrates; i++) {
+ nl_rate = nla_nest_start(msg, i);
+ if (!nl_rate)
+ goto nla_put_failure;
+
+ rate = &dev->wiphy.bands[band]->bitrates[i];
+ NLA_PUT_U32(msg, NL80211_BITRATE_ATTR_RATE,
+ rate->bitrate);
+ if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
+ NLA_PUT_FLAG(msg,
+ NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE);
+
+ nla_nest_end(msg, nl_rate);
+ }
+
+ nla_nest_end(msg, nl_rates);
+
+ nla_nest_end(msg, nl_band);
+ }
+ nla_nest_end(msg, nl_bands);
+
return genlmsg_end(msg, hdr);
nla_put_failure: