ARM i.MX51: Full iomux support
This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 24e335c..1d231e8 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -95,8 +95,8 @@
MX51_PAD_KEY_COL5__I2C2_SDA,
/* HSI2C */
- MX51_PAD_I2C1_CLK__HSI2C_CLK,
- MX51_PAD_I2C1_DAT__HSI2C_DAT,
+ MX51_PAD_I2C1_CLK__I2C1_CLK,
+ MX51_PAD_I2C1_DAT__I2C1_DAT,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -112,29 +112,29 @@
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
/* USB HUB reset line*/
- MX51_PAD_GPIO_1_7__GPIO_1_7,
+ MX51_PAD_GPIO1_7__GPIO1_7,
/* FEC */
MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDAT1,
- MX51_PAD_EIM_CS2__FEC_RDAT2,
- MX51_PAD_EIM_CS3__FEC_RDAT3,
+ MX51_PAD_EIM_EB3__FEC_RDATA1,
+ MX51_PAD_EIM_CS2__FEC_RDATA2,
+ MX51_PAD_EIM_CS3__FEC_RDATA3,
MX51_PAD_EIM_CS4__FEC_RX_ER,
MX51_PAD_EIM_CS5__FEC_CRS,
MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RXCLK,
- MX51_PAD_NANDF_RB6__FEC_RDAT0,
- MX51_PAD_NANDF_RB7__FEC_TDAT0,
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ MX51_PAD_NANDF_D8__FEC_TDATA0,
MX51_PAD_NANDF_CS2__FEC_TX_ER,
MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDAT1,
- MX51_PAD_NANDF_CS5__FEC_TDAT2,
- MX51_PAD_NANDF_CS6__FEC_TDAT3,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
MX51_PAD_NANDF_CS7__FEC_TX_EN,
MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
/* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO_2_14,
+ MX51_PAD_EIM_A20__GPIO2_14,
/* SD 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
@@ -156,8 +156,8 @@
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO_4_24,
- MX51_PAD_CSPI1_SS1__GPIO_4_25,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
};
/* Serial ports */
@@ -188,8 +188,8 @@
static int gpio_usbh1_active(void)
{
- iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
- iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+ iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+ iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
@@ -352,8 +352,8 @@
static void __init mxc_board_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = (MX51_PAD_EIM_A27__GPIO_2_21 &
- ~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2;
+ iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+ MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;