[SCSI] megaraid_{mbox,mm} : remove PCI Id overlaping between megaraid_legacy and megaraid_{mbox,mm}
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5331d91..09f6300 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,38 @@
+Release Date : Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+
+1. Sorted out PCI IDs to remove megaraid support overlaps.
+ Based on the patch from Daniel, sorted out PCI IDs along with
+ charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+ conflict.
+ ---
+ Hopefully we'll be getting the build restriction zapped much sooner,
+ but we should also be thinking about totally removing the hardware
+ support overlap in the megaraid drivers.
+
+ This patch pencils in a date of Feb 06 for this, and performs some
+ printk abuse in hope that existing legacy users might pick up on what's
+ going on.
+
+ Signed-off-by: Daniel Drake <dsd@gentoo.org>
+ ---
+
+2. Fixed a issue: megaraid always fails to reset handler.
+ ---
+ I found that the megaraid driver always fails to reset the
+ adapter with the following message:
+ megaraid: resetting the host...
+ megaraid mbox: reset sequence completed successfully
+ megaraid: fast sync command timed out
+ megaraid: reservation reset failed
+ when the "Cluster mode" of the adapter BIOS is enabled.
+ So, whenever the reset occurs, the adapter goes to
+ offline and just become unavailable.
+
+ Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
+ ---
+
Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 7363e12..17419e3 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -64,7 +64,6 @@
To compile this driver as a module, choose M here: the
module will be called megaraid_mbox
-if MEGARAID_NEWGEN=n
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
depends on PCI && SCSI
@@ -75,7 +74,6 @@
To compile this driver as a module, choose M here: the
module will be called megaraid
-endif
config MEGARAID_SAS
tristate "LSI Logic MegaRAID SAS RAID Module"
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 4b5d420..d18a4bc 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,12 +10,13 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.6 (Mar 07 2005)
+ * Version : v2.20.4.7 (Nov 14 2005)
*
* Authors:
* Atul Mukker <Atul.Mukker@lsil.com>
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
* Manoj Jose <Manoj.Jose@lsil.com>
+ * Seokmann Ju <Seokmann.Ju@lsil.com>
*
* List of supported controllers
*
@@ -136,7 +137,7 @@
-MODULE_AUTHOR("LSI Logic Corporation");
+MODULE_AUTHOR("sju@lsil.com");
MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_VERSION);
@@ -278,68 +279,14 @@
{
PCI_VENDOR_ID_AMI,
PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_VENDOR_ID_DELL,
- PCI_SUBSYS_ID_PERC3_QC,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
},
{
- PCI_VENDOR_ID_AMI,
+ PCI_VENDOR_ID_LSI_LOGIC,
PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_VENDOR_ID_DELL,
- PCI_SUBSYS_ID_PERC3_DC,
- },
- {
- PCI_VENDOR_ID_AMI,
- PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_VENDOR_ID_DELL,
- PCI_SUBSYS_ID_PERC3_SC,
- },
- {
- PCI_VENDOR_ID_AMI,
- PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_VENDOR_ID_AMI,
- PCI_SUBSYS_ID_PERC3_SC,
- },
- {
- PCI_VENDOR_ID_AMI,
- PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_VENDOR_ID_AMI,
- PCI_SUBSYS_ID_PERC3_DC,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_SCSI_320_0,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_SCSI_320_0,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_SCSI_320_1,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_SCSI_320_1,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_SCSI_320_2,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_SCSI_320_2,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_I4_133_RAID,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_I4_133_RAID,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_SATA_150_4,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_SATA_150_4,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_MEGARAID_SATA_150_6,
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_SUBSYS_ID_MEGARAID_SATA_150_6,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
},
{
PCI_VENDOR_ID_LSI_LOGIC,
@@ -347,18 +294,6 @@
PCI_ANY_ID,
PCI_ANY_ID,
},
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_INTEL_RAID_SRCS16,
- PCI_VENDOR_ID_INTEL,
- PCI_SUBSYS_ID_INTEL_RAID_SRCS16,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
- PCI_VENDOR_ID_INTEL,
- PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
- },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, pci_id_table_g);
@@ -2985,6 +2920,7 @@
for (i = 0; i < 0xFFFFF; i++) {
if (mbox->numstatus != 0xFF) break;
+ rmb();
}
if (i == 0xFFFFF) {
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 644b91b..882fb1a 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
#include "megaraid_ioctl.h"
-#define MEGARAID_VERSION "2.20.4.6"
-#define MEGARAID_EXT_VERSION "(Release Date: Mon Mar 07 12:27:22 EST 2005)"
+#define MEGARAID_VERSION "2.20.4.7"
+#define MEGARAID_EXT_VERSION "(Release Date: Mon Nov 14 12:27:22 EST 2005)"
/*