| #define PRISM2_PCI |
| |
| /* Host AP driver's support for Intersil Prism2.5 PCI cards is based on |
| * driver patches from Reyk Floeter <reyk@vantronix.net> and |
| * Andy Warner <andyw@pobox.com> */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/if.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/workqueue.h> |
| #include <linux/wireless.h> |
| #include <net/iw_handler.h> |
| |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| |
| #include "hostap_wlan.h" |
| |
| |
| static char *dev_info = "hostap_pci"; |
| |
| |
| MODULE_AUTHOR("Jouni Malinen"); |
| MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN " |
| "PCI cards."); |
| MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| /* struct local_info::hw_priv */ |
| struct hostap_pci_priv { |
| void __iomem *mem_start; |
| }; |
| |
| |
| /* FIX: do we need mb/wmb/rmb with memory operations? */ |
| |
| |
| static DEFINE_PCI_DEVICE_TABLE(prism2_pci_id_table) = { |
| /* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */ |
| { 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, |
| /* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */ |
| { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, |
| /* Samsung MagicLAN SWL-2210P */ |
| { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, |
| { 0 } |
| }; |
| |
| |
| #ifdef PRISM2_IO_DEBUG |
| |
| static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| local_info_t *local; |
| unsigned long flags; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| hw_priv = local->hw_priv; |
| |
| spin_lock_irqsave(&local->lock, flags); |
| prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); |
| writeb(v, hw_priv->mem_start + a); |
| spin_unlock_irqrestore(&local->lock, flags); |
| } |
| |
| static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| local_info_t *local; |
| unsigned long flags; |
| u8 v; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| hw_priv = local->hw_priv; |
| |
| spin_lock_irqsave(&local->lock, flags); |
| v = readb(hw_priv->mem_start + a); |
| prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); |
| spin_unlock_irqrestore(&local->lock, flags); |
| return v; |
| } |
| |
| static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| local_info_t *local; |
| unsigned long flags; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| hw_priv = local->hw_priv; |
| |
| spin_lock_irqsave(&local->lock, flags); |
| prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); |
| writew(v, hw_priv->mem_start + a); |
| spin_unlock_irqrestore(&local->lock, flags); |
| } |
| |
| static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| local_info_t *local; |
| unsigned long flags; |
| u16 v; |
| |
| iface = netdev_priv(dev); |
| local = iface->local; |
| hw_priv = local->hw_priv; |
| |
| spin_lock_irqsave(&local->lock, flags); |
| v = readw(hw_priv->mem_start + a); |
| prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); |
| spin_unlock_irqrestore(&local->lock, flags); |
| return v; |
| } |
| |
| #define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) |
| #define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) |
| #define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) |
| #define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) |
| #define HFA384X_OUTW_DATA(v,a) hfa384x_outw_debug(dev, (a), le16_to_cpu((v))) |
| #define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw_debug(dev, (a))) |
| |
| #else /* PRISM2_IO_DEBUG */ |
| |
| static inline void hfa384x_outb(struct net_device *dev, int a, u8 v) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| iface = netdev_priv(dev); |
| hw_priv = iface->local->hw_priv; |
| writeb(v, hw_priv->mem_start + a); |
| } |
| |
| static inline u8 hfa384x_inb(struct net_device *dev, int a) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| iface = netdev_priv(dev); |
| hw_priv = iface->local->hw_priv; |
| return readb(hw_priv->mem_start + a); |
| } |
| |
| static inline void hfa384x_outw(struct net_device *dev, int a, u16 v) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| iface = netdev_priv(dev); |
| hw_priv = iface->local->hw_priv; |
| writew(v, hw_priv->mem_start + a); |
| } |
| |
| static inline u16 hfa384x_inw(struct net_device *dev, int a) |
| { |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| iface = netdev_priv(dev); |
| hw_priv = iface->local->hw_priv; |
| return readw(hw_priv->mem_start + a); |
| } |
| |
| #define HFA384X_OUTB(v,a) hfa384x_outb(dev, (a), (v)) |
| #define HFA384X_INB(a) hfa384x_inb(dev, (a)) |
| #define HFA384X_OUTW(v,a) hfa384x_outw(dev, (a), (v)) |
| #define HFA384X_INW(a) hfa384x_inw(dev, (a)) |
| #define HFA384X_OUTW_DATA(v,a) hfa384x_outw(dev, (a), le16_to_cpu((v))) |
| #define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw(dev, (a))) |
| |
| #endif /* PRISM2_IO_DEBUG */ |
| |
| |
| static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, |
| int len) |
| { |
| u16 d_off; |
| __le16 *pos; |
| |
| d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; |
| pos = (__le16 *) buf; |
| |
| for ( ; len > 1; len -= 2) |
| *pos++ = HFA384X_INW_DATA(d_off); |
| |
| if (len & 1) |
| *((char *) pos) = HFA384X_INB(d_off); |
| |
| return 0; |
| } |
| |
| |
| static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) |
| { |
| u16 d_off; |
| __le16 *pos; |
| |
| d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; |
| pos = (__le16 *) buf; |
| |
| for ( ; len > 1; len -= 2) |
| HFA384X_OUTW_DATA(*pos++, d_off); |
| |
| if (len & 1) |
| HFA384X_OUTB(*((char *) pos), d_off); |
| |
| return 0; |
| } |
| |
| |
| /* FIX: This might change at some point.. */ |
| #include "hostap_hw.c" |
| |
| static void prism2_pci_cor_sreset(local_info_t *local) |
| { |
| struct net_device *dev = local->dev; |
| u16 reg; |
| |
| reg = HFA384X_INB(HFA384X_PCICOR_OFF); |
| printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg); |
| |
| /* linux-wlan-ng uses extremely long hold and settle times for |
| * COR sreset. A comment in the driver code mentions that the long |
| * delays appear to be necessary. However, at least IBM 22P6901 seems |
| * to work fine with shorter delays. |
| * |
| * Longer delays can be configured by uncommenting following line: */ |
| /* #define PRISM2_PCI_USE_LONG_DELAYS */ |
| |
| #ifdef PRISM2_PCI_USE_LONG_DELAYS |
| int i; |
| |
| HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); |
| mdelay(250); |
| |
| HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); |
| mdelay(500); |
| |
| /* Wait for f/w to complete initialization (CMD:BUSY == 0) */ |
| i = 2000000 / 10; |
| while ((HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) && --i) |
| udelay(10); |
| |
| #else /* PRISM2_PCI_USE_LONG_DELAYS */ |
| |
| HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); |
| mdelay(2); |
| HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); |
| mdelay(2); |
| |
| #endif /* PRISM2_PCI_USE_LONG_DELAYS */ |
| |
| if (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) { |
| printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name); |
| } |
| } |
| |
| |
| static void prism2_pci_genesis_reset(local_info_t *local, int hcr) |
| { |
| struct net_device *dev = local->dev; |
| |
| HFA384X_OUTW(0x00C5, HFA384X_PCICOR_OFF); |
| mdelay(10); |
| HFA384X_OUTW(hcr, HFA384X_PCIHCR_OFF); |
| mdelay(10); |
| HFA384X_OUTW(0x0045, HFA384X_PCICOR_OFF); |
| mdelay(10); |
| } |
| |
| |
| static struct prism2_helper_functions prism2_pci_funcs = |
| { |
| .card_present = NULL, |
| .cor_sreset = prism2_pci_cor_sreset, |
| .genesis_reset = prism2_pci_genesis_reset, |
| .hw_type = HOSTAP_HW_PCI, |
| }; |
| |
| |
| static int prism2_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| unsigned long phymem; |
| void __iomem *mem = NULL; |
| local_info_t *local = NULL; |
| struct net_device *dev = NULL; |
| static int cards_found /* = 0 */; |
| int irq_registered = 0; |
| struct hostap_interface *iface; |
| struct hostap_pci_priv *hw_priv; |
| |
| hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); |
| if (hw_priv == NULL) |
| return -ENOMEM; |
| |
| if (pci_enable_device(pdev)) |
| goto err_out_free; |
| |
| phymem = pci_resource_start(pdev, 0); |
| |
| if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) { |
| printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n"); |
| goto err_out_disable; |
| } |
| |
| mem = pci_ioremap_bar(pdev, 0); |
| if (mem == NULL) { |
| printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ; |
| goto fail; |
| } |
| |
| dev = prism2_init_local_data(&prism2_pci_funcs, cards_found, |
| &pdev->dev); |
| if (dev == NULL) |
| goto fail; |
| iface = netdev_priv(dev); |
| local = iface->local; |
| local->hw_priv = hw_priv; |
| cards_found++; |
| |
| dev->irq = pdev->irq; |
| hw_priv->mem_start = mem; |
| |
| prism2_pci_cor_sreset(local); |
| |
| pci_set_drvdata(pdev, dev); |
| |
| if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name, |
| dev)) { |
| printk(KERN_WARNING "%s: request_irq failed\n", dev->name); |
| goto fail; |
| } else |
| irq_registered = 1; |
| |
| if (!local->pri_only && prism2_hw_config(dev, 1)) { |
| printk(KERN_DEBUG "%s: hardware initialization failed\n", |
| dev_info); |
| goto fail; |
| } |
| |
| printk(KERN_INFO "%s: Intersil Prism2.5 PCI: " |
| "mem=0x%lx, irq=%d\n", dev->name, phymem, dev->irq); |
| |
| return hostap_hw_ready(dev); |
| |
| fail: |
| if (irq_registered && dev) |
| free_irq(dev->irq, dev); |
| |
| if (mem) |
| iounmap(mem); |
| |
| release_mem_region(phymem, pci_resource_len(pdev, 0)); |
| |
| err_out_disable: |
| pci_disable_device(pdev); |
| prism2_free_local_data(dev); |
| |
| err_out_free: |
| kfree(hw_priv); |
| |
| return -ENODEV; |
| } |
| |
| |
| static void prism2_pci_remove(struct pci_dev *pdev) |
| { |
| struct net_device *dev; |
| struct hostap_interface *iface; |
| void __iomem *mem_start; |
| struct hostap_pci_priv *hw_priv; |
| |
| dev = pci_get_drvdata(pdev); |
| iface = netdev_priv(dev); |
| hw_priv = iface->local->hw_priv; |
| |
| /* Reset the hardware, and ensure interrupts are disabled. */ |
| prism2_pci_cor_sreset(iface->local); |
| hfa384x_disable_interrupts(dev); |
| |
| if (dev->irq) |
| free_irq(dev->irq, dev); |
| |
| mem_start = hw_priv->mem_start; |
| prism2_free_local_data(dev); |
| kfree(hw_priv); |
| |
| iounmap(mem_start); |
| |
| release_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| pci_disable_device(pdev); |
| } |
| |
| |
| #ifdef CONFIG_PM |
| static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (netif_running(dev)) { |
| netif_stop_queue(dev); |
| netif_device_detach(dev); |
| } |
| prism2_suspend(dev); |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return 0; |
| } |
| |
| static int prism2_pci_resume(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR "%s: pci_enable_device failed on resume\n", |
| dev->name); |
| return err; |
| } |
| pci_restore_state(pdev); |
| prism2_hw_config(dev, 0); |
| if (netif_running(dev)) { |
| netif_device_attach(dev); |
| netif_start_queue(dev); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| |
| MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); |
| |
| static struct pci_driver prism2_pci_driver = { |
| .name = "hostap_pci", |
| .id_table = prism2_pci_id_table, |
| .probe = prism2_pci_probe, |
| .remove = prism2_pci_remove, |
| #ifdef CONFIG_PM |
| .suspend = prism2_pci_suspend, |
| .resume = prism2_pci_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| |
| static int __init init_prism2_pci(void) |
| { |
| return pci_register_driver(&prism2_pci_driver); |
| } |
| |
| |
| static void __exit exit_prism2_pci(void) |
| { |
| pci_unregister_driver(&prism2_pci_driver); |
| } |
| |
| |
| module_init(init_prism2_pci); |
| module_exit(exit_prism2_pci); |