arch/arm/boot/dts/armada-39x.dtsi - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Device Tree Include file for Marvell Armada 39x family of SoCs.
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>

 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))

 / {
 	model = "Marvell Armada 39x family SoC";
 	compatible = "marvell,armada390";

 	aliases {
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
 		serial3 = &uart3;
 	};

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "marvell,armada-390-smp";

 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 		};
 	};

 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts-extended = <&mpic 3>;
 	};

 	soc {
 		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
 			     "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;
 		interrupt-parent = <&gic>;
 		pcie-mem-aperture = <0xe0000000 0x8000000>;
 		pcie-io-aperture  = <0xe8000000 0x100000>;

 		bootrom {
 			compatible = "marvell,bootrom";
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
 		};

 		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;

 			L2: cache-controller@8000 {
 				compatible = "arm,pl310-cache";
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
 				arm,double-linefill-incr = <1>;
 				arm,double-linefill-wrap = <0>;
 				arm,double-linefill = <1>;
 				prefetch-data = <1>;
 			};

 			scu@c000 {
 				compatible = "arm,cortex-a9-scu";
 				reg = <0xc000 0x100>;
 			};

 			timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
 				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
 				clocks = <&coreclk 2>;
 			};

 			gic: interrupt-controller@d000 {
 				compatible = "arm,cortex-a9-gic";
 				#interrupt-cells = <3>;
 				#size-cells = <0>;
 				interrupt-controller;
 				reg = <0xd000 0x1000>,
 				      <0xc100 0x100>;
 			};

 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			i2c1: i2c@11100 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			i2c2: i2c@11200 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11200 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			i2c3: i2c@11300 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11300 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			uart0: serial@12000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12200 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			uart3: serial@12300 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12300 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};

 			pinctrl@18000 {
 				i2c0_pins: i2c0-pins {
 					marvell,pins = "mpp2", "mpp3";
 					marvell,function = "i2c0";
 				};

 				uart0_pins: uart0-pins {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
 				};

 				uart1_pins: uart1-pins {
 					marvell,pins = "mpp19", "mpp20";
 					marvell,function = "ua1";
 				};

 				spi1_pins: spi1-pins {
 					marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
 					marvell,function = "spi1";
 				};

 				nand_pins: nand-pins {
 					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
 						       "mpp38", "mpp28", "mpp40", "mpp42",
 						       "mpp35", "mpp36", "mpp25", "mpp30",
 						       "mpp32";
 					marvell,function = "dev";
 				};
 			};

 			gpio0: gpio@18100 {
 				compatible = "marvell,orion-gpio";
 				reg = <0x18100 0x40>;
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			};

 			gpio1: gpio@18140 {
 				compatible = "marvell,orion-gpio";
 				reg = <0x18140 0x40>;
 				ngpios = <28>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			};

 			system-controller@18200 {
 				compatible = "marvell,armada-390-system-controller",
 					     "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
 			};

 			gateclk: clock-gating-control@18220 {
 				compatible = "marvell,armada-390-gating-clock";
 				reg = <0x18220 0x4>;
 				clocks = <&coreclk 0>;
 				#clock-cells = <1>;
 			};

 			coreclk: mvebu-sar@18600 {
 				compatible = "marvell,armada-390-core-clock";
 				reg = <0x18600 0x04>;
 				#clock-cells = <1>;
 			};

 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
 				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
 			};

 			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
 				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};

 			timer@20300 {
 				compatible = "marvell,armada-380-timer",
 					     "marvell,armada-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
 						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
 						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 						      <&mpic 5>,
 						      <&mpic 6>;
 				clocks = <&coreclk 2>, <&coreclk 5>;
 				clock-names = "nbclk", "fixed";
 			};

 			watchdog@20300 {
 				compatible = "marvell,armada-380-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>,
 				      <0x18260 0x4>;
 				clocks = <&coreclk 2>, <&refclk>;
 				clock-names = "nbclk", "fixed";
 			};

 			cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};

 			mpcore-soc-ctrl@20d20 {
 				compatible = "marvell,armada-380-mpcore-soc-ctrl";
 				reg = <0x20d20 0x6c>;
 			};

 			coherency-fabric@21010 {
 				compatible = "marvell,armada-380-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};

 			pmsu@22000 {
 				compatible = "marvell,armada-390-pmsu",
 					     "marvell,armada-380-pmsu";
 				reg = <0x22000 0x1000>;
 			};

 			xor@60800 {
 				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
 				status = "okay";

 				xor00 {
 					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor01 {
 					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;
 				};
 			};

 			xor@60900 {
 				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
 				status = "okay";

 				xor10 {
 					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor11 {
 					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;
 				};
 			};

 			rtc@a3800 {
 				compatible = "marvell,armada-380-rtc";
 				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
 				reg-names = "rtc", "rtc-soc";
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			};

 			flash@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
 			};

 			sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
 				reg-names = "sdhci", "mbus", "conf-sdio3";
 				reg = <0xd8000 0x1000>,
 					<0xdc000 0x100>,
 					<0x18454 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 17>;
 				mrvl,clk-delay-cycles = <0x1F>;
 				status = "disabled";
 			};

 			coredivclk: clock@e4250 {
 				compatible = "marvell,armada-390-corediv-clock",
 					     "marvell,armada-380-corediv-clock";
 				reg = <0xe4250 0xc>;
 				#clock-cells = <1>;
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};

 			thermal@e8078 {
 				compatible = "marvell,armada380-thermal";
 				reg = <0xe4078 0x4>, <0xe4074 0x4>;
 				status = "okay";
 			};
 		};

 		pcie-controller {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";

 			#address-cells = <3>;
 			#size-cells = <2>;

 			msi-parent = <&mpic>;
 			bus-range = <0x00 0xff>;

 			ranges =
 			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
 				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
 				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
 				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
 				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
 				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
 				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
 				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;

 			/*
 			 * This port can be either x4 or x1. When
 			 * configured in x4 by the bootloader, then
 			 * pcie@4,0 is not available.
 			 */
 			pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
 			};

 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
 			};

 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
 			};

 			/*
 			 * x1 port only available when pcie@1,0 is
 			 * configured as a x1 port
 			 */
 			pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
 			};
 		};

 		spi0: spi@10600 {
 			compatible = "marvell,armada-390-spi",
 					"marvell,orion-spi";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&coreclk 0>;
 			status = "disabled";
 		};

 		spi1: spi@10680 {
 			compatible = "marvell,armada-390-spi",
 					"marvell,orion-spi";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&coreclk 0>;
 			status = "disabled";
 		};
 	};

 	clocks {
 		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000000>;
 		};

 		/* 25 MHz reference crystal */
 		refclk: oscillator {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 	};
 };
	/*
	* Device Tree Include file for Marvell Armada 39x family of SoCs.
	*
	* Copyright (C) 2015 Marvell
	*
	* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include "skeleton.dtsi"
	#include <dt-bindings/interrupt-controller/arm-gic.h>
	#include <dt-bindings/interrupt-controller/irq.h>

	#define MBUS_ID(target,attributes) (((target) << 24) \| ((attributes) << 16))

	/ {
	model = "Marvell Armada 39x family SoC";
	compatible = "marvell,armada390";

	aliases {
	gpio0 = &gpio0;
	gpio1 = &gpio1;
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &uart2;
	serial3 = &uart3;
	};

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;
	enable-method = "marvell,armada-390-smp";

	cpu@0 {
	device_type = "cpu";
	compatible = "arm,cortex-a9";
	reg = <0>;
	};
	cpu@1 {
	device_type = "cpu";
	compatible = "arm,cortex-a9";
	reg = <1>;
	};
	};

	pmu {
	compatible = "arm,cortex-a9-pmu";
	interrupts-extended = <&mpic 3>;
	};

	soc {
	compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
	"simple-bus";
	#address-cells = <2>;
	#size-cells = <1>;
	controller = <&mbusc>;
	interrupt-parent = <&gic>;
	pcie-mem-aperture = <0xe0000000 0x8000000>;
	pcie-io-aperture = <0xe8000000 0x100000>;

	bootrom {
	compatible = "marvell,bootrom";
	reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
	};

	internal-regs {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;

	L2: cache-controller@8000 {
	compatible = "arm,pl310-cache";
	reg = <0x8000 0x1000>;
	cache-unified;
	cache-level = <2>;
	arm,double-linefill-incr = <1>;
	arm,double-linefill-wrap = <0>;
	arm,double-linefill = <1>;
	prefetch-data = <1>;
	};

	scu@c000 {
	compatible = "arm,cortex-a9-scu";
	reg = <0xc000 0x100>;
	};

	timer@c600 {
	compatible = "arm,cortex-a9-twd-timer";
	reg = <0xc600 0x20>;
	interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING \| GIC_CPU_MASK_SIMPLE(2))>;
	clocks = <&coreclk 2>;
	};

	gic: interrupt-controller@d000 {
	compatible = "arm,cortex-a9-gic";
	#interrupt-cells = <3>;
	#size-cells = <0>;
	interrupt-controller;
	reg = <0xd000 0x1000>,
	<0xc100 0x100>;
	};

	i2c0: i2c@11000 {
	compatible = "marvell,mv64xxx-i2c";
	reg = <0x11000 0x20>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
	timeout-ms = <1000>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	i2c1: i2c@11100 {
	compatible = "marvell,mv64xxx-i2c";
	reg = <0x11100 0x20>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
	timeout-ms = <1000>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	i2c2: i2c@11200 {
	compatible = "marvell,mv64xxx-i2c";
	reg = <0x11200 0x20>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
	timeout-ms = <1000>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	i2c3: i2c@11300 {
	compatible = "marvell,mv64xxx-i2c";
	reg = <0x11300 0x20>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
	timeout-ms = <1000>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	uart0: serial@12000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x12000 0x100>;
	reg-shift = <2>;
	interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
	reg-io-width = <1>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	uart1: serial@12100 {
	compatible = "snps,dw-apb-uart";
	reg = <0x12100 0x100>;
	reg-shift = <2>;
	interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
	reg-io-width = <1>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	uart2: serial@12200 {
	compatible = "snps,dw-apb-uart";
	reg = <0x12200 0x100>;
	reg-shift = <2>;
	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
	reg-io-width = <1>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	uart3: serial@12300 {
	compatible = "snps,dw-apb-uart";
	reg = <0x12300 0x100>;
	reg-shift = <2>;
	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
	reg-io-width = <1>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	pinctrl@18000 {
	i2c0_pins: i2c0-pins {
	marvell,pins = "mpp2", "mpp3";
	marvell,function = "i2c0";
	};

	uart0_pins: uart0-pins {
	marvell,pins = "mpp0", "mpp1";
	marvell,function = "ua0";
	};

	uart1_pins: uart1-pins {
	marvell,pins = "mpp19", "mpp20";
	marvell,function = "ua1";
	};

	spi1_pins: spi1-pins {
	marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
	marvell,function = "spi1";
	};

	nand_pins: nand-pins {
	marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
	"mpp38", "mpp28", "mpp40", "mpp42",
	"mpp35", "mpp36", "mpp25", "mpp30",
	"mpp32";
	marvell,function = "dev";
	};
	};

	gpio0: gpio@18100 {
	compatible = "marvell,orion-gpio";
	reg = <0x18100 0x40>;
	ngpios = <32>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
	};

	gpio1: gpio@18140 {
	compatible = "marvell,orion-gpio";
	reg = <0x18140 0x40>;
	ngpios = <28>;
	gpio-controller;
	#gpio-cells = <2>;
	interrupt-controller;
	#interrupt-cells = <2>;
	interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
	};

	system-controller@18200 {
	compatible = "marvell,armada-390-system-controller",
	"marvell,armada-370-xp-system-controller";
	reg = <0x18200 0x100>;
	};

	gateclk: clock-gating-control@18220 {
	compatible = "marvell,armada-390-gating-clock";
	reg = <0x18220 0x4>;
	clocks = <&coreclk 0>;
	#clock-cells = <1>;
	};

	coreclk: mvebu-sar@18600 {
	compatible = "marvell,armada-390-core-clock";
	reg = <0x18600 0x04>;
	#clock-cells = <1>;
	};

	mbusc: mbus-controller@20000 {
	compatible = "marvell,mbus-controller";
	reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
	};

	mpic: interrupt-controller@20a00 {
	compatible = "marvell,mpic";
	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
	#interrupt-cells = <1>;
	#size-cells = <1>;
	interrupt-controller;
	msi-controller;
	interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
	};

	timer@20300 {
	compatible = "marvell,armada-380-timer",
	"marvell,armada-xp-timer";
	reg = <0x20300 0x30>, <0x21040 0x30>;
	interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
	<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
	<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
	<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
	<&mpic 5>,
	<&mpic 6>;
	clocks = <&coreclk 2>, <&coreclk 5>;
	clock-names = "nbclk", "fixed";
	};

	watchdog@20300 {
	compatible = "marvell,armada-380-wdt";
	reg = <0x20300 0x34>, <0x20704 0x4>,
	<0x18260 0x4>;
	clocks = <&coreclk 2>, <&refclk>;
	clock-names = "nbclk", "fixed";
	};

	cpurst@20800 {
	compatible = "marvell,armada-370-cpu-reset";
	reg = <0x20800 0x10>;
	};

	mpcore-soc-ctrl@20d20 {
	compatible = "marvell,armada-380-mpcore-soc-ctrl";
	reg = <0x20d20 0x6c>;
	};

	coherency-fabric@21010 {
	compatible = "marvell,armada-380-coherency-fabric";
	reg = <0x21010 0x1c>;
	};

	pmsu@22000 {
	compatible = "marvell,armada-390-pmsu",
	"marvell,armada-380-pmsu";
	reg = <0x22000 0x1000>;
	};

	xor@60800 {
	compatible = "marvell,armada-380-xor", "marvell,orion-xor";
	reg = <0x60800 0x100
	0x60a00 0x100>;
	clocks = <&gateclk 22>;
	status = "okay";

	xor00 {
	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
	dmacap,memcpy;
	dmacap,xor;
	};
	xor01 {
	interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
	dmacap,memcpy;
	dmacap,xor;
	dmacap,memset;
	};
	};

	xor@60900 {
	compatible = "marvell,armada-380-xor", "marvell,orion-xor";
	reg = <0x60900 0x100
	0x60b00 0x100>;
	clocks = <&gateclk 28>;
	status = "okay";

	xor10 {
	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
	dmacap,memcpy;
	dmacap,xor;
	};
	xor11 {
	interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
	dmacap,memcpy;
	dmacap,xor;
	dmacap,memset;
	};
	};

	rtc@a3800 {
	compatible = "marvell,armada-380-rtc";
	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
	reg-names = "rtc", "rtc-soc";
	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
	};

	flash@d0000 {
	compatible = "marvell,armada370-nand";
	reg = <0xd0000 0x54>;
	#address-cells = <1>;
	#size-cells = <1>;
	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&coredivclk 0>;
	status = "disabled";
	};

	sdhci@d8000 {
	compatible = "marvell,armada-380-sdhci";
	reg-names = "sdhci", "mbus", "conf-sdio3";
	reg = <0xd8000 0x1000>,
	<0xdc000 0x100>,
	<0x18454 0x4>;
	interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&gateclk 17>;
	mrvl,clk-delay-cycles = <0x1F>;
	status = "disabled";
	};

	coredivclk: clock@e4250 {
	compatible = "marvell,armada-390-corediv-clock",
	"marvell,armada-380-corediv-clock";
	reg = <0xe4250 0xc>;
	#clock-cells = <1>;
	clocks = <&mainpll>;
	clock-output-names = "nand";
	};

	thermal@e8078 {
	compatible = "marvell,armada380-thermal";
	reg = <0xe4078 0x4>, <0xe4074 0x4>;
	status = "okay";
	};
	};

	pcie-controller {
	compatible = "marvell,armada-370-pcie";
	status = "disabled";
	device_type = "pci";

	#address-cells = <3>;
	#size-cells = <2>;

	msi-parent = <&mpic>;
	bus-range = <0x00 0xff>;

	ranges =
	<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
	0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
	0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
	0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
	0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
	0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
	0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
	0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
	0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
	0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
	0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
	0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;

	/*
	* This port can be either x4 or x1. When
	* configured in x4 by the bootloader, then
	* pcie@4,0 is not available.
	*/
	pcie@1,0 {
	device_type = "pci";
	assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
	reg = <0x0800 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	#interrupt-cells = <1>;
	ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
	0x81000000 0 0 0x81000000 0x1 0 1 0>;
	interrupt-map-mask = <0 0 0 0>;
	interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
	marvell,pcie-port = <0>;
	marvell,pcie-lane = <0>;
	clocks = <&gateclk 8>;
	status = "disabled";
	};

	/* x1 port */
	pcie@2,0 {
	device_type = "pci";
	assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
	reg = <0x1000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	#interrupt-cells = <1>;
	ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
	0x81000000 0 0 0x81000000 0x2 0 1 0>;
	interrupt-map-mask = <0 0 0 0>;
	interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
	marvell,pcie-port = <1>;
	marvell,pcie-lane = <0>;
	clocks = <&gateclk 5>;
	status = "disabled";
	};

	/* x1 port */
	pcie@3,0 {
	device_type = "pci";
	assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
	reg = <0x1800 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	#interrupt-cells = <1>;
	ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
	0x81000000 0 0 0x81000000 0x3 0 1 0>;
	interrupt-map-mask = <0 0 0 0>;
	interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
	marvell,pcie-port = <2>;
	marvell,pcie-lane = <0>;
	clocks = <&gateclk 6>;
	status = "disabled";
	};

	/*
	* x1 port only available when pcie@1,0 is
	* configured as a x1 port
	*/
	pcie@4,0 {
	device_type = "pci";
	assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
	reg = <0x2000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	#interrupt-cells = <1>;
	ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
	0x81000000 0 0 0x81000000 0x4 0 1 0>;
	interrupt-map-mask = <0 0 0 0>;
	interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
	marvell,pcie-port = <3>;
	marvell,pcie-lane = <0>;
	clocks = <&gateclk 7>;
	status = "disabled";
	};
	};

	spi0: spi@10600 {
	compatible = "marvell,armada-390-spi",
	"marvell,orion-spi";
	reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
	#address-cells = <1>;
	#size-cells = <0>;
	cell-index = <0>;
	interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};

	spi1: spi@10680 {
	compatible = "marvell,armada-390-spi",
	"marvell,orion-spi";
	reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
	#address-cells = <1>;
	#size-cells = <0>;
	cell-index = <1>;
	interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&coreclk 0>;
	status = "disabled";
	};
	};

	clocks {
	/* 1 GHz fixed main PLL */
	mainpll: mainpll {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <1000000000>;
	};

	/* 25 MHz reference crystal */
	refclk: oscillator {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <25000000>;
	};
	};
	};