Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: fsl_udc_core: Fix kernel oops on module removal
USB: option: TLAYTECH TUE800 support
USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set
USB: serial: sierra driver autopm fixes
USB: serial: sierra driver send_setup() autopm fix
USB: rndis_host: debug info clobbered before it is logged
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 0caa800..f56dec6 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -362,12 +362,12 @@
retval = -EINVAL;
goto halt_fail_and_release;
}
- dev->hard_mtu = tmp;
- net->mtu = dev->hard_mtu - net->hard_header_len;
dev_warn(&intf->dev,
"dev can't take %u byte packets (max %u), "
"adjusting MTU to %u\n",
- dev->hard_mtu, tmp, net->mtu);
+ dev->hard_mtu, tmp, tmp - net->hard_header_len);
+ dev->hard_mtu = tmp;
+ net->mtu = dev->hard_mtu - net->hard_header_len;
}
/* REVISIT: peripheral "alignment" request is ignored ... */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 42a74b8..fa3d142 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2139,7 +2139,7 @@
static void fsl_udc_release(struct device *dev)
{
complete(udc_controller->done);
- dma_free_coherent(dev, udc_controller->ep_qh_size,
+ dma_free_coherent(dev->parent, udc_controller->ep_qh_size,
udc_controller->ep_qh, udc_controller->ep_qh_dma);
kfree(udc_controller);
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 749b537..e33d362 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1003,19 +1003,20 @@
if (syssts == SE0) {
r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
- return;
+ } else {
+ if (syssts == FS_JSTS)
+ r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+ else if (syssts == LS_JSTS)
+ r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+
+ r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
+ r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
+
+ if (r8a66597->bus_suspended)
+ usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
}
- if (syssts == FS_JSTS)
- r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
- else if (syssts == LS_JSTS)
- r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
-
- r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
- r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
-
- if (r8a66597->bus_suspended)
- usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+ usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
}
/* this function must be called with interrupt disabled */
@@ -1024,6 +1025,8 @@
u16 speed = get_rh_usb_speed(r8a66597, port);
struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+ rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) |
+ (1 << USB_PORT_FEAT_LOWSPEED));
if (speed == HSMODE)
rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED);
else if (speed == LSMODE)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 65d96b2..cd44c68 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -315,6 +315,9 @@
#define QISDA_PRODUCT_H20_4515 0x4515
#define QISDA_PRODUCT_H20_4519 0x4519
+/* TLAYTECH PRODUCTS */
+#define TLAYTECH_VENDOR_ID 0x20B9
+#define TLAYTECH_PRODUCT_TEU800 0x1682
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
@@ -593,6 +596,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
+ { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 4588398..5019325 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -296,7 +296,6 @@
int dsr_state;
int dcd_state;
int ri_state;
-
unsigned int opened:1;
};
@@ -306,6 +305,8 @@
struct sierra_port_private *portdata;
__u16 interface = 0;
int val = 0;
+ int do_send = 0;
+ int retval;
dev_dbg(&port->dev, "%s\n", __func__);
@@ -324,10 +325,7 @@
*/
if (port->interrupt_in_urb) {
/* send control message */
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ do_send = 1;
}
}
@@ -339,12 +337,18 @@
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ do_send = 1;
}
- return 0;
+ if (!do_send)
+ return 0;
+
+ usb_autopm_get_interface(serial->interface);
+ retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ usb_autopm_put_interface(serial->interface);
+
+ return retval;
}
static void sierra_set_termios(struct tty_struct *tty,
@@ -773,8 +777,11 @@
if (serial->dev) {
mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
+ if (!serial->disconnected) {
+ serial->interface->needs_remote_wakeup = 0;
+ usb_autopm_get_interface(serial->interface);
sierra_send_setup(port);
+ }
mutex_unlock(&serial->disc_mutex);
spin_lock_irq(&intfdata->susp_lock);
portdata->opened = 0;
@@ -788,8 +795,6 @@
sierra_release_urb(portdata->in_urbs[i]);
portdata->in_urbs[i] = NULL;
}
- usb_autopm_get_interface(serial->interface);
- serial->interface->needs_remote_wakeup = 0;
}
}
@@ -827,6 +832,8 @@
if (err) {
/* get rid of everything as in close */
sierra_close(port);
+ /* restore balance for autopm */
+ usb_autopm_put_interface(serial->interface);
return err;
}
sierra_send_setup(port);
@@ -915,7 +922,7 @@
#ifdef CONFIG_PM
static void stop_read_write_urbs(struct usb_serial *serial)
{
- int i, j;
+ int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
@@ -923,8 +930,7 @@
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
- for (j = 0; j < N_IN_URB; j++)
- usb_kill_urb(portdata->in_urbs[j]);
+ sierra_stop_rx_urbs(port);
usb_kill_anchored_urbs(&portdata->active);
}
}