atyfb: fix HP OmniBook 500 reboot hang
Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms
the hardware. The BIOS will simply hang after a reboot. Fix the problem
by restoring the hardware to it's original state on reboot.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 7691e73..0369653 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -187,6 +187,8 @@
int mtrr_reg;
#endif
u32 mem_cntl;
+ struct crtc saved_crtc;
+ union aty_pll saved_pll;
};
/*
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1207c20..0678290 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,8 @@
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/backlight.h>
+#include <linux/reboot.h>
+#include <linux/dmi.h>
#include <asm/io.h>
#include <linux/uaccess.h>
@@ -249,8 +251,6 @@
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
-static struct crtc saved_crtc;
-static union aty_pll saved_pll;
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -261,6 +261,8 @@
static int read_aty_sense(const struct atyfb_par *par);
#endif
+static DEFINE_MUTEX(reboot_lock);
+static struct fb_info *reboot_info;
/*
* Interface used by the world
@@ -2390,9 +2392,9 @@
#endif /* CONFIG_FB_ATY_CT */
/* save previous video mode */
- aty_get_crtc(par, &saved_crtc);
+ aty_get_crtc(par, &par->saved_crtc);
if(par->pll_ops->get_pll)
- par->pll_ops->get_pll(info, &saved_pll);
+ par->pll_ops->get_pll(info, &par->saved_pll);
par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
@@ -2667,8 +2669,8 @@
aty_init_exit:
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
@@ -3502,6 +3504,11 @@
par->mmap_map[1].prot_flag = _PAGE_E;
#endif /* __sparc__ */
+ mutex_lock(&reboot_lock);
+ if (!reboot_info)
+ reboot_info = info;
+ mutex_unlock(&reboot_lock);
+
return 0;
err_release_io:
@@ -3614,8 +3621,8 @@
struct atyfb_par *par = (struct atyfb_par *) info->par;
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
unregister_framebuffer(info);
@@ -3661,6 +3668,11 @@
{
struct fb_info *info = pci_get_drvdata(pdev);
+ mutex_lock(&reboot_lock);
+ if (reboot_info == info)
+ reboot_info = NULL;
+ mutex_unlock(&reboot_lock);
+
atyfb_remove(info);
}
@@ -3808,6 +3820,56 @@
}
#endif /* MODULE */
+static int atyfb_reboot_notify(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct atyfb_par *par;
+
+ if (code != SYS_RESTART)
+ return NOTIFY_DONE;
+
+ mutex_lock(&reboot_lock);
+
+ if (!reboot_info)
+ goto out;
+
+ if (!lock_fb_info(reboot_info))
+ goto out;
+
+ par = reboot_info->par;
+
+ /*
+ * HP OmniBook 500's BIOS doesn't like the state of the
+ * hardware after atyfb has been used. Restore the hardware
+ * to the original state to allow successful reboots.
+ */
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(reboot_info, &par->saved_pll);
+
+ unlock_fb_info(reboot_info);
+ out:
+ mutex_unlock(&reboot_lock);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block atyfb_reboot_notifier = {
+ .notifier_call = atyfb_reboot_notify,
+};
+
+static const struct dmi_system_id atyfb_reboot_ids[] = {
+ {
+ .ident = "HP OmniBook 500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"),
+ },
+ },
+
+ { }
+};
+
static int __init atyfb_init(void)
{
int err1 = 1, err2 = 1;
@@ -3826,11 +3888,20 @@
err2 = atyfb_atari_probe();
#endif
- return (err1 && err2) ? -ENODEV : 0;
+ if (err1 && err2)
+ return -ENODEV;
+
+ if (dmi_check_system(atyfb_reboot_ids))
+ register_reboot_notifier(&atyfb_reboot_notifier);
+
+ return 0;
}
static void __exit atyfb_exit(void)
{
+ if (dmi_check_system(atyfb_reboot_ids))
+ unregister_reboot_notifier(&atyfb_reboot_notifier);
+
#ifdef CONFIG_PCI
pci_unregister_driver(&atyfb_driver);
#endif